Tintina Resources Inc. ("Tintina" and/or the "Company") (TSX
VENTURE:TAU)(OTCQX:TINTF) is pleased to announce that it has
completed in-fill drilling and an updated NI 43-101 compliant
resource estimate on one of the several copper deposits on its
Black Butte Copper Project ("Black Butte"), formerly called "Sheep
Creek", located in Central Montana, USA (see Figure 1).
Highlights:
-- The Johnny Lee Zone (formerly called "the Upper Copper Zone at
Strawberry Butte") contains an Indicated Resource of 8.48 million metric
tonnes ("MMT") grading 2.96% copper (Cu), 0.12% cobalt (Co), and 16.9
g/tonne silver (Ag) and an Inferred Resource of 1.26 MMT grading 2.64%
Cu, 0.10% Co, and 16.4 g/t Ag, both at a 1.60% Cu cut-off grade and an
assumed copper price of $2.75/lb.
Jerry Zieg, Vice President of Exploration, said, "We are very
pleased with the results to date from the drill program on the
Johnny Lee deposit. The outcome exceeded expectations. We have not
only upgraded all of the previously reported Inferred Resource to
Indicated Resource, but have also improved the overall average
copper grade to 2.96% and increased the amount of contained copper
in the Johnny Lee deposit from 366 million pounds in the Inferred
Resource first announced on January 6, 2011 to 553 million pounds
in the Indicated Resource category in this new estimate,
representing a 51% increase. In addition to the Johnny Lee Zone,
favorable drilling results have been obtained from the Lowry Zone
(formerly called 'The Middle Copper Zone at Strawberry East') and
the Lower Copper Zone. I have great confidence that Tintina is well
on its way to meeting its objective of identifying a billion pounds
of copper on the Black Butte Copper project."
Tables 1 & 2 show a range of Indicated & Inferred
Resources, at various cut-off grades, for the Johnny Lee Zone.
Table 1 - Johnny Lee Zone Undiluted Indicated Mineral Resources
----------------------------------------------------------------------------
Estimated Metal Grades Contained Metal
---------------------------------------------------------
Cu Cutoff Tonnes Ag Ozs
(%) (000) Cu (%) Co (%) Ag (g/t) Cu Lbs (M) Co Lbs (M) (000)
----------------------------------------------------------------------------
0.00 16,145 2.06 0.10 16.0 733 36 8,305
----------------------------------------------------------------------------
0.40 15,956 2.08 0.10 16.1 731 35 8,259
----------------------------------------------------------------------------
0.80 14,394 2.23 0.11 16.5 707 35 7,636
----------------------------------------------------------------------------
1.20 11,284 2.57 0.11 16.6 639 27 6,022
----------------------------------------------------------------------------
1.60 8,483 2.96 0.12 16.9 553 22 4,609
----------------------------------------------------------------------------
2.00 6,137 3.41 0.14 16.9 461 19 3,335
----------------------------------------------------------------------------
2.40 4,782 3.76 0.14 16.9 396 15 2,598
----------------------------------------------------------------------------
2.80 3,735 4.09 0.15 16.4 337 12 1,969
----------------------------------------------------------------------------
Table 2 - Johnny Lee Zone Undiluted Inferred Mineral Resources
----------------------------------------------------------------------------
Estimated Metal Grades Contained Metal
---------------------------------------------------------
Cu Cutoff Tonnes Ag Ozs
(%) (000) Cu (%) Co (%) Ag (g/t) Cu Lbs (M) Co Lbs (M) (000)
----------------------------------------------------------------------------
0.00 2,489 1.89 0.09 16.4 104 5 1,312
----------------------------------------------------------------------------
0.40 2,484 1.89 0.09 16.4 103 5 1,310
----------------------------------------------------------------------------
0.80 2,301 1.99 0.09 16.5 101 5 1,221
----------------------------------------------------------------------------
1.20 1,806 2.26 0.10 16.3 90 4 946
----------------------------------------------------------------------------
1.60 1,257 2.64 0.10 16.4 73 3 663
----------------------------------------------------------------------------
2.00 886 2.99 0.11 16.2 58 2 461
----------------------------------------------------------------------------
2.40 620 3.33 0.12 16.1 46 2 321
----------------------------------------------------------------------------
2.80 423 3.67 0.13 16.0 34 1 218
----------------------------------------------------------------------------
(i) It cannot be assumed that all or any part of an Inferred Resource will
be upgraded to an Indicated Resource, or that an Indicated Mineral Resource
will be upgraded to a Measured Resource, as a result of continued
exploration. Mineral Resources are not Mineral Reserves because there are
insufficient studies to demonstrate economic viability. Mineral Resources
are global undiluted in situ totals. Mineral Resource numbers have been
rounded and may not add up in the above table. A new NI 43-101 Technical
Report for the Black Butte Copper Property, which will include the new
Mineral Resource estimate, will be filed on SEDAR within the next 45 days.
The Johnny Lee deposit is a shallow tabular layer of
copper-cobalt-silver mineralization with bands of massive
chalcopyrite concentrated within a fine-grained massive pyritic
sulfide layer hosted by shale and debris flow conglomerate. The
deposit lies at depths ranging from 30 to 210 meters below the
surface and ranges in thickness between 1.2 and 13.1 meters. All
drill hole intersections represent approximate true thicknesses in
the gently dipping mineralized zones. Historic resources calculated
by earlier operators are non-compliant with NI 43-101 standards and
are not being relied upon for resource estimation purposes. There
is potential for additional resource in the Johnny Lee deposit and
in the five other Cu-Co-Ag deposits identified on the property to
date.
The Company had released an Inferred Resource estimate for the
Lower Copper Zone at Strawberry Butte (see the Company's news
release dated August 17, 2011), being one of the five Cu-Co-Ag
deposits, of 2.46 MMT containing 4.71% Cu, 0.06% Co, and 5.1
g/tonne Ag containing 256 Million pounds of copper at a 1.5% Cu
cut-off grade. The Company expects to release a resource estimate
for the Lowry deposit (formerly "Middle Copper Zone at Strawberry
East") in the first half of 2012. The Mineral Resource estimate for
the Johnny Lee deposit was prepared by Mike Lechner, President of
Resource Modeling Inc., who is an independent Qualified Person as
defined by NI 43-101. The drill hole database that was used to
estimate Mineral Resources consists of 19 drill holes completed by
Cominco American Inc., Utah International, BHP, and 54 drill holes
completed by Tintina Resources Inc. totaling 16,595.76 meters. The
Mineral Resource estimate was completed by constructing a three
dimensional computer block model with a block size of 5 m X 5 m in
the X and Y dimensions and 1 m in the Z dimension.
Three-dimensional wireframes were constructed representing the
Johnny Lee mineralized zones and the Volcano Valley Fault.
One-meter-long drill hole composites were generated from the assay
data after capping high-grade outliners and were subsequently used
to estimate copper, cobalt, gold, and silver grades using a dynamic
anisotropy search strategy and inverse distance weighting. The
block grades were validated visually and by comparing the inverse
distance grades with a nearest neighbor model.
Jerry Zieg, Vice President of Exploration for the Company is a
Qualified Person for the purposes of National Instrument 43-101 and
has reviewed and approved the information of a scientific or
technical nature contained in this news release.
PEA scope expanded
In the first quarter of 2011, the Company initiated a
Preliminary Economic Analysis (PEA) focused solely on the original
Inferred Resource at the Johnny Lee deposit. As a result of over
20,000 meters of infill and expansion diamond drilling in the
Johnny Lee and Lower Copper Zones over the course of 2011, the
identified resources outlined above expanded and displayed
remarkably high grades in the Inferred Resource in the Lower Copper
Zone (2.46 MMT grading 4.71% Cu, 0.06% Co, 5.1 g/t Ag, and 0.35 g/t
Au at a cut-off grade of 1.50% Cu). Given the robustness of the
stacked mineralized zones (see Figure 2) coupled with anticipated
resource increases, the Company has decided to expand the scope of
the PEA. This new study will model higher annual throughputs at
grades nearly 50% higher than those contemplated in the original
PEA and should be available early in the third quarter of 2012.
About Tintina Resources Inc.
Tintina Resources Inc. is a growth company focused on the
exploration and development of base and precious metal properties
around the world. The Company's experienced Board of Directors and
Management Team are focused on advancing the Black Butte Cu-Co-Ag
property in Montana towards a production decision. The Company is
also exploring an impressive portfolio of gold and base metal
projects in Alaska, including the Colorado Creek gold project
located in southwest Alaska in the same region as the 40 million
ounce Donlin Creek project.
About Black Butte Copper
The Black Butte Copper Project is located approximately 17 miles
north of White Sulphur Springs and within two miles of U.S. Highway
89 along a well-maintained gravel road. The Black Butte Copper
property consists of approximately 12,225 acres of fee simple lands
and mining claims in central Montana. The property contains
sediment-hosted zones of massive sulfide mineralization originally
explored by Cominco American Inc. and BHP during the 1980s and
early 1990s. Historical drilling encountered significant zones of
strata-bound copper sulfide with associated cobalt and silver
mineralization in multiple, bedded massive pyrite horizons in the
lower part of the Precambrian Belt Supergroup. This same
stratigraphic unit hosts the famous Sullivan zinc-lead-silver
deposit in southeastern B.C. In a short period of time the Company
has been able to establish Indicated and Inferred Resources on the
Johnny Lee Zone and an Inferred Resource on the Lower Copper Zone
at Strawberry Butte (please see the Company news release dated
August 17, 2011). The Company continues to evaluate several tabular
mineralized zones along a trend at least three kilometers strike
length. The Company has completed over 30,000 meters of drilling
over the course of 2011.
The Company is preparing an advanced underground exploration
proposal which includes an evaluation decline and ancillary
facilities, all located on private land in Meagher County, for
presentation to the State's appropriate authorities. This proposal
is expected to be filed by the spring of 2012.
About Mining in Montana
Montana has been known as a mining state for a well over 100
years. Today, more than two dozen mining operations are active
making mining a cornerstone contributor to the State's GDP. Tintina
has met with State regulators and looks forward to presenting the
Black Butte Copper project as an underground mine with a small
footprint located on private land. The project continues to benefit
from broad local community support.
To view Figures 1 and 2 associated with this press release,
please visit the following link:
http://media3.marketwire.com/docs/tau1130i.pdf.
ON BEHALF OF THE BOARD OF DIRECTORS
Louis A. Lepry, Jr., President & CEO
Cautionary Note Regarding Forward-Looking Statements: Certain
disclosure in this release, including statements regarding resource
estimates, the Company's plans for and intentions and objectives
with respect to exploration of the Company's Black Butte Copper
property, the filing of a new NI 43-101 Technical Report for the
Black Butte Copper property, the release of a resource estimate for
the Lowry deposit, the content and timing of a Preliminary Economic
Analysis and the filing of an advanced underground exploration
proposal for the Black Butte Copper Project constitutes
"forward-looking statements" within the meaning of the United
States Private Securities Litigation Reform Act of 1995 and
Canadian securities legislation. In making the forward-looking
statements in this release, the Company has applied certain factors
and assumptions that the Company believes are reasonable, including
that the key assumptions and parameters on which the resource
estimates are based are reasonable, the Company is able to obtain
any government or other regulatory approvals and any financing
required to complete the Company's planned exploration and other
activities, that the Company is able to procure equipment,
personnel, supplies and any required financing in sufficient
quantities, at reasonable cost and on a timely basis to enable the
Company to meet its exploration objectives and to complete the
filing of a new NI 43-101 Technical Report for the Black Butte
Copper property, the release of a resource estimate for the Lowry
deposit, the preparation of a Preliminary Economic Analysis and the
filing of an advanced underground exploration proposal for the
Black Butte Copper Project as planned, that the Company's
exploration activities on the Black Butte Copper property will not
be affected by actions of environmental activists or other special
interest groups, that actual results of exploration activities will
be consistent with management's expectations.
However, the forward-looking statements in this release are
subject to numerous risks, uncertainties and other factors relating
to Tintina's operations as a mineral exploration company and the
Black Butte Copper property that may cause future results to differ
materially from those expressed or implied in such forward-looking
statements. Such uncertainties and risks include, among others,
that data and assumptions underlying the resource estimates may
prove to be inaccurate, incomplete or to have been incorrectly
interpreted, the general risk of unexpected variations in mineral
resources, and grade or recovery rates, actual results of the
Company's exploration activities being different than those
expected by management, uncertainties involved in the
interpretation of drilling results and geological tests,delays in
obtaining or inability to obtain required government or other
regulatory approvals or financing, interference with Tintina
Resource's exploration activities by environmental activists or
other special interest groups, inability to procure equipment,
personnel and supplies in sufficient quantities and on a timely
basis, equipment breakdowns and bad weather. There can be no
assurance that such statements will prove to be accurate, and
actual results and future events could differ materially from those
anticipated in such statements. Readers are cautioned not to place
undue reliance on forward-looking statements. Tintina does not
intend, and expressly disclaims any intention or obligation to,
update or revise any forward-looking statements whether as a result
of new information, future events or otherwise, except as required
by law.
Neither the TSX Venture Exchange nor its Regulation Services
Provider (as that term is defined in the policies of the TSX
Venture Exchange) accepts responsibility for the adequacy or
accuracy of this release.
Contacts: Tintina Resources Inc. Philippe Van Nieuwenhuyse
Investor Relations 604-628-1162 ext. 236 604-628-1163
(FAX)philvann@tintinaresources.comwww.tintinaresources.com
Common Stock (TSXV:TAU)
Historical Stock Chart
From Nov 2024 to Dec 2024
Common Stock (TSXV:TAU)
Historical Stock Chart
From Dec 2023 to Dec 2024
