TSX-V: MKO; OTCQB: MAKOF
VANCOUVER, March 25, 2020 /CNW/ - Mako Mining
Corp. (TSX-V: MKO; OTCQB: MAKOF) ("Mako" or the "Company")
is pleased to report positive drill results from the Las Conchitas
area of its wholly-owned San Albino-Murra property located in
Nueva Segovia, Nicaragua. The
Las Conchitas area is located approximately 2.5 kilometers south of
the fully permitted San Albino gold project currently under
construction.
The goal of the 2020 drill program at Las Conchitas is to focus
on the most promising zones of near surface, shallow dipping,
high-grade gold mineralization in order to delineate a maiden
resource estimate. Since 2019, the Company has completed 148
shallow drill holes totaling 11,450.1 meters ("m") within the Las
Conchitas area.
This press release includes six holes with assay results from
the Bayacun Zone (see attached map). All six holes
intersected gold-bearing structures at the predicted locations,
confirming both lateral and vertical continuity. Importantly,
five of the six holes intersected gold grades in excess of 23 g/t
Au as highlighted below (ranked by grade x thickness).
- LC20-181: 84.64 g/t Au and 80.2 g/t Ag over 1.60 m, 80 m from
surface
- LC20-183: 25.78 g/t Au and 18.3 g/t Ag over 3.85 m, 45 m from
surface
- LC20-182: 24.85 g/t Au and 18.0 g/t Ag over 2.10 m, 107.5 m
from surface
- LC20-164: 23.57 g/t Au and 20.5 g/t Ag over 1.20 m, 35 m from
surface
- LC20-163: 37.90 g/t Au and 14.8 g/t Ag over 0.50 m, 55.5 m from
surface
The highest grade interval reported in this press release comes
from hole LC20-181, which was designed to test the strike extension
of the Bayacun Zone encountered in previous drilling.
Specifically, LC20-181 intersected the Bayacun Zone 35 m northeast of hole LC20-162, which returned
30.61 g/t Au and 37.1 g/t Ag over 3.4
m (see attached cross section and press release dated
March 11, 2020).
From the same drill pad, vertical drill hole LC20-182
intersected 24.85 g/t Au and 18.0 g/t Ag over 2.10 m and extended the down-dip length of
mineralization from a surface exposure down to 140 m (see attached cross section).
Results to date from the Bayacun Zone indicate approximate
dimensions of 70 m along strike by
110 m down dip and continues to be
open along strike and at depth.
Akiba Leisman, Chief Executive
Officer of Mako states, "every hole referenced in this press
release hit significant gold mineralization with grades as high as
84.6 g/t Au over 1.6 m. The
Bayacun Zone of the Las Conchitas area is proving to be a
predictable and high-grade target at relatively shallow
depths. Even though precautions are being taken across our
Nicaraguan operations to reduce the threat of COVID-19, a drill rig
will continue to focus on exploration drilling at Las Conchitas
with the goal of delineating a maiden resource next calendar
year."
The thickest intercept was encountered in hole LC20-183, which
intersected 25.78 g/t Au and 18.3 g/t Ag over 3.85 m, approximately 45
m from surface. LC20-183 was designed to test the
strike extension from holes LC20-181 and 182 for an additional
60 m and the down-dip extension of
the mineralized zone intersected by holes LC19-104 and LC19-105,
which returned 42.79 g/t Au and 59.9 g/t Ag over 1.70 m and 19.34 g/t Au and 13.6 g/t Ag over
4.90 m, respectively (see press
release dated September 10,
2019).
Additionally, LC20-183 intersected a highly mineralized zone
approximately 95 m down-dip from an
exploration pit at the Rosibel Zone, where a shallow-dipping quartz
vein was exposed. Vertical sampling of the zone in the pit
returned 29.30 g/t Au and 44.7 g/t Ag over 1.5 m.
This press release contains results from six holes totaling
537 m drilled into the Bayacun
Zone. There are 19 additional drill holes still awaiting
assay results from the Bayacun Zone.
Las Conchitas Assay Results Reported In This Press
Release
Drill
Hole
|
From
(m)
|
To
(m)
|
Width
(m)*
|
Au
(g/t)
|
Ag
(g/t)
|
Interval
Average
|
Zone
|
LC20-163
|
55.50
|
56.00
|
0.50
|
37.90
|
14.8
|
37.90 g.t Au and
14.8 g/t Ag over 0.50 m
|
Bayacun
|
LC20-164
|
52.90
|
53.60
|
0.70
|
10.40
|
8.2
|
23.57 g/t Au and
20.5 g/t Ag over 1.20 m
|
53.60
|
54.10
|
0.50
|
42.00
|
37.7
|
LC20-167
|
50.20
|
51.00
|
0.80
|
0.49
|
1.1
|
3.50 g/t Au and
15.4 g/t Ag over 3.00 m
|
51.00
|
52.00
|
1.00
|
8.77
|
11.4
|
52.00
|
53.00
|
1.00
|
0.12
|
1.6
|
53.00
|
54.00
|
1.00
|
1.61
|
33.2
|
LC20-181
|
91.65
|
92.35
|
0.70
|
113.50
|
119.0
|
84.64 g/t Au and
80.2 g/t Ag over 1.60 m
|
92.35
|
93.25
|
0.90
|
62.20
|
50.0
|
LC20-182
|
107.50
|
108.30
|
0.80
|
11.60
|
10.3
|
24.85 g/t Au and
18.0 g/t Ag over 2.10 m
|
108.30
|
109.60
|
1.30
|
33.00
|
22.7
|
LC20-183
|
60.65
|
61.50
|
0.85
|
18.80
|
8.9
|
25.78 g/t Au and
18.3 g/t Ag over 3.85 m
|
61.50
|
62.80
|
1.30
|
51.50
|
33.6
|
62.80
|
63.50
|
0.70
|
21.70
|
24.7
|
63.50
|
64.50
|
1.00
|
1.14
|
2.0
|
The mineralized
intervals shown above utilize a 1.0 g/t gold cut-off grade with not
more than 1.0 meter of internal dilution. *Lengths are reported as
core lengths. True widths vary depending on drill hole dip, the
veins are shallow dipping and typical true widths are 80-100% of
the downhole width.
|
Sampling, Assaying, QA/QC and Data Verification
Drill core was continuously sampled from inception to
termination of the drill hole. Sample intervals were
typically one meter. Drill core diameter was HQ (6.35
centimeters). Geologic and geotechnical data was captured
into a digital database, core was photographed, then one-half split
of the core was collected for analysis and one-half was retained in
the core library. Samples were kept in a secured logging and
storage facility until such time that they were delivered to the
Managua facilities of Bureau
Veritas and pulps were sent to the Bureau Veritas laboratory in
Vancouver for analysis. Gold
was analyzed by standard fire assay fusion, 30 gram aliquot, AAS
finish. Samples returning over 10.0 g/t gold are analyzed
utilizing standard Fire Assay-Gravimetric method. Due to the
presence of coarse gold, the Company has used 500-gram metallic
screened gold assays for analyzing samples from mineralized veins
and samples immediately above and below drilled veins. This
method, which analyzes a larger sample, can be more precise in
high-grade vein systems containing coarse gold. All reported drill
results in this press release using the metallic screening method
are indicated. The Company follows industry standards in its
QA&QC procedures. Control samples consisting of duplicates,
standards, and blanks were inserted into the sample stream at a
ratio of 1 control sample per every 10 samples. Analytical
results of control samples confirmed reliability of the assay
data. No top cut has been applied to the reported assay
results.
Qualified Person
John M. Kowalchuk, P.Geo, a
geologist and qualified person (as defined under National
Instrument 43-101) has read and approved the technical information
contained in this press release. Mr. Kowalchuk is a senior
geologist and a consultant to the Company.
On behalf of the Board,
Akiba Leisman
Chief Executive Officer
About Mako
Mako Mining Corp. is a publicly listed gold mining, development
and exploration firm. The Company is developing its high-grade San
Albino gold project in Nueva
Segovia, Nicaragua. Mako's
primary objective is to bring San Albino into production quickly
and efficiently, while continuing exploration of prospective
targets in Nicaragua.
Forward-Looking Statements: Some of the
statements contained herein may be considered "forward-looking
information" within the meaning of applicable securities
laws. Forward-looking information is based on certain
expectations and assumptions, including that the results pending
from the remaining 19 additional drill holes for which the Company
is awaiting results from the laboratory will support strike and dip
continuity of gold mineralization; that the Company's exploration
programs will be successfully completed; that a maiden resource at
the Las Conchitas are may be delineated as a result of the
Company's 2020 drilling; and that the Company will be successful in
any financing plans necessary for drilling and construction at the
San Albino project. Such forward-looking information is subject to
a variety of risks and uncertainties which could cause actual
events or results to differ materially from those reflected in the
forward-looking information, including, without limitation, the
risks that additional satisfactory exploration results at the
Bayacun Zone will not be obtained; the risk that the Company's
drilling at Las Conchitas in 2020 will not delineate a maiden
resource at the Las Conchitas area; that exploration results will
not translate into the discovery of an economically viable deposit;
risks and uncertainties relating to political risks involving the
Company's exploration and development of mineral properties
interests; the inherent uncertainty of cost estimates and the
potential for unexpected costs and expense; commodity price
fluctuations, the inability or failure to obtain adequate financing
on a timely basis and other risks and uncertainties. Such
information contained herein represents management's best judgment
as of the date hereof, based on information currently available and
is included for the purposes of providing investors with the
Company's plans and expectations at its San Albino project and the
Las Conchitas area, and may not be appropriate for other
purposes.
Neither the TSX Venture Exchange nor its Regulation Services
Provider (as that term is defined in the policies of the TSX
Venture Exchange) accepts responsibility for the adequacy or
accuracy of this release.
SOURCE Mako Mining Corp.