TSX-V: MKO
VANCOUVER, March 11, 2020 /CNW/ - Mako Mining
Corp. (TSX-V: MKO) ("Mako" or the "Company") is pleased to
report positive drill results from the Las Conchitas area of its
wholly-owned San Albino-Murra property located in Nueva Segovia, Nicaragua. The Las Conchitas
area is located approximately 2.5 kilometers south of the fully
permitted San Albino gold project currently under construction.
The goal of the 2020 drill program at Las Conchitas is to focus
on the most promising zones of near surface, shallow dipping,
high-grade gold mineralization in order to delineate a maiden
resource. Since 2019, the Company has completed 134 shallow
drill holes totaling 10,644.20 meters ("m") within the Las
Conchitas area (see the attached map).
The highest grade intervals reported in this press release come
from drill holes LC20-165 and LC20-162. Both holes are
located in the Bayacun Zone, which was discovered by Mako in 2019
(see press release dated September 10,
2019), and is located towards the southern end of the Las
Conchitas area, approximately 4 kilometers south of the processing
plant currently under construction at San Albino.
Hole LC20-165 intersected 32.73 g/t Au and 33.7 g/t Ag over
3.1 m approximately 56 m from surface (see attached cross
section). This hole was drilled to test a down-dip extension
of high-grade gold mineralization intercepted in hole LC19-104,
which returned 42.79 g/t Au and 59.9 g/t Ag over 1.7 m approximately 40
m from surface (see attached cross section and press release
dated September 10, 2019). Hole
LC20-162 intersected 30.61 g/t Au and 37.1 g/t Ag over 3.4 m approximately 63
m from surface.
Akiba Leisman, Chief Executive
Officer of Mako states, "these results at the Bayacun Zone of Las
Conchitas further support our thesis that the San Albino deposit is
part of a larger high-grade, near surface gold system on the
Company's 150 square kilometer land package. Additionally, we
have only begun to understand the geological controls at Las
Conchitas. As we continue drilling, and as we gain invaluable
information from mining the San Albino deposit to the north, we
expect to advance Las Conchitas to the point where it can become
our second area of mining over the next couple of years."
Bayacun is an historic underground mine, which was last operated
in the late 1800's. While no production data is available, the
Company had previously sampled what appeared to be a historic
stockpile near a tunnel in 2012 that returned 34.90 g/t Au and 42.4
g/t Ag (see press release dated March
21, 2012). Direct shipping ore was sent to the nearby,
historic El Golfo mill for processing. The mill, along with
the historic El Golfo mine, are located within Mako's El Jicaro
concession, an area which the Company plans to drill after the San
Albino gold project is commissioned.
The Bayacun Zone appears to be analogous to San Albino in terms
of continuity, geochemistry and predictability. It is open for
at least 50 m to the southwest until
Candelaria creek, which is interpreted to be a fault with unknown
offset. The zone is also open down-dip and to the
northeast. Importantly, recent down-dip drilling at the
Bayacun Zone has returned holes containing visible gold. Assays on
these holes are expected back later this month.
Furthermore, drill hole LC20-148 returned a mineralized interval
of 20.94 g/t Au and 6.13 g/t Ag over 2.3
m, 73 m from surface within
the El Limon Zone. This hole was designed to test the down-dip
extension of El Limon and results have demonstrated that the
high-grade gold mineralization is still open to the southwest.
Las Conchitas is an underexplored area along a gold-rich
corridor with multiple historic underground workings. All of
the underground workings are caved-in and not accessible. Outcrops
in the area are sparse to nonexistent, making it challenging to
resolve the structural complexities of the area and to determine
the local controls on gold mineralization. The Company is
eager to expose the gold bearing veins at San Albino to gain a
better understanding of the gold emplacement and to apply this
knowledge at Las Conchitas.
This press release contains results from 17 holes totaling
1,668.85 m drilled into five
zones. There are 52 additional drill holes still awaiting
assay results.
Las Conchitas Assay Results Reported In This Press
Release
Drill
Hole
|
From
(m)
|
To
(m)
|
Width
(m)*
|
Au
(g/t)
|
Ag
(g/t)
|
Interval Average /
Comments
|
Zone
|
LC19-123
|
|
|
|
|
|
No significant
results
|
La Fortuna
|
LC19-124**
|
27.70
|
28.70
|
1.00
|
|
|
Void
|
SW
Extension of
Intermediate
Zone
|
28.70
|
30.60
|
1.90
|
1.32
|
3.4
|
1.32 g/t Au and 3.4
g/t Ag over 1.9m
|
41.40
|
42.50
|
1.10
|
|
|
Void
|
199.80
|
200.60
|
0.80
|
8.68***
|
24.9
|
8.68 g/t Au and 24.9
g/t Ag over 0.8m
|
202.70
|
203.40
|
0.70
|
26.80***
|
50.1
|
26.80 g/t Au and 50.1
g/t Ag over 0.7m
|
LC19-125
|
42.90
|
44.50
|
1.60
|
3.62
|
8.2
|
3.62 g/t Au and 8.2
g/t Ag over 1.6m
|
LC19-126 to
129
|
|
|
|
|
|
Results
pending
|
LC19-130**
|
0.00
|
1.50
|
1.50
|
1.36
|
3.3
|
1.36 g/t Au and 3.3
g/t Ag over 1.5m
|
Mango Zone
|
LC19-131
|
2.50
|
3.50
|
1.00
|
5.44
|
13.2
|
5.44 g/t Au and 13.2
g/t Ag over 1.0m
|
LC19-132**
|
96.00
|
97.10
|
1.10
|
3.04***
|
5.1
|
3.04 g/t Au and 5.1
g/t Ag over 1.1m
|
LC19-133
|
|
|
|
|
|
No significant
results
|
LC19-134
|
|
|
|
|
|
Results
pending
|
LC19-135**
|
62.10
|
63.50
|
1.40
|
62.30***
|
70.3
|
62.3 g/t Au and 70.3
g/t Ag over 1.4m
|
LC19-136
|
|
|
|
|
|
Results
pending
|
LC19-137
|
|
|
|
|
|
Results
pending
|
LC19-138
|
42.15
|
43.15
|
1.00
|
14.50
|
11.2
|
14.5 g/t Au and 11.2
g/t Ag over 1.0m
|
LC19-139
|
|
|
|
|
|
Results
pending****
|
LC19-140
|
68.00
|
68.75
|
0.75
|
2.35
|
5.5
|
2.35 g/t Au and 5.5
g/t Ag over 0.75m
|
71.70
|
72.60
|
0.90
|
9.67
|
33.9
|
9.67 g/t Au and 33.9
g/t Ag over 0.9m
|
LC19-141**
|
27.50
|
28.00
|
0.50
|
5.23***
|
4.1
|
5.23 g/t Au and 4.1
g/t Ag over 0.5m
|
61.00
|
61.50
|
0.50
|
3.69***
|
4.5
|
3.69 g/t Au and 4.5
g/t Ag over 0.5m
|
68.20
|
68.90
|
0.70
|
44.71***
|
43.1
|
44.71 g/t Au and 43.1
g/t Ag over 0.7m
|
LC19-142
|
76.20
|
77.30
|
1.10
|
1.33***
|
5.2
|
1.33 g/t Au and 5.2
g/t Ag over 1.1m****
|
El Limon
|
LC19-143
|
79.00
|
80.00
|
1.00
|
1.02***
|
4.2
|
1.02 g/t Au and 4.2
g/t Ag over 1.0m****
|
LC19-144 to
145
|
|
|
|
|
|
Results
pending
|
LC19-146
|
101.20
|
102.40
|
1.20
|
1.12
|
6.9
|
1.12 g/t Au and 6.9
g/t Ag over 1.2m
|
|
105.20
|
106.50
|
1.30
|
1.19
|
1.1
|
1.19 g/t Au and 1.1
g/t Ag over 1.3m
|
LC19-147
|
90.00
|
90.60
|
0.60
|
1.50***
|
2.3
|
9.1 g/t Au and 13.6
g/t Ag over 2.1m
|
90.60
|
92.10
|
1.50
|
12.14***
|
18.1
|
LC20-148
|
81.40
|
81.90
|
0.50
|
93.2
|
27.4
|
20.94 g/t Au and 6.13
g/t Ag over 2.3m
|
81.90
|
82.70
|
0.80
|
0.1
|
0.3
|
82.70
|
83.70
|
1.00
|
1.49
|
<0.3
|
LC20-149
|
|
|
|
|
|
Results
pending
|
LC20-150
|
89.50
|
90.50
|
1.00
|
7.71
|
9.8
|
7.71 g/t Au and 9.8
g/t Ag over 1.0m****
|
LC20-151 to
153
|
|
|
|
|
|
Results
pending
|
LC20-154
|
24.50
|
25.10
|
0.60
|
18.20
|
7.4
|
18.2 g/t Au and 7.4
g/t Ag over 0.6m****
|
LC20-155
|
27.00
|
28.50
|
1.50
|
0.56
|
1.0
|
Results
pending****
|
LC20-156
|
63.00
|
63.50
|
0.50
|
7.55
|
7.6
|
7.55 g/t Au and 7.6
g/t Ag over 0.5m****
|
LC20-157 to
159
|
|
|
|
|
|
Results
pending
|
LC20-160
|
56.50
|
57.50
|
1.00
|
1.936
|
6.8
|
3.34 g/t Au and 4.7
g/t Ag over 3.5m****
|
Bayacun
|
57.50
|
58.50
|
1.00
|
0.595
|
2.9
|
58.50
|
60.00
|
1.50
|
6.095
|
4.6
|
LC20-161
|
|
|
|
|
|
Results
pending****
|
LC20-162
|
42.00
|
43.50
|
1.50
|
1.10
|
0.7
|
1.1 g/t Au and 0.7
g/t Ag over 1.5m
|
69.70
|
70.70
|
1.00
|
1.11
|
2.2
|
30.61 g/t Au and 37.1
g/t Ag over 3.4m
|
70.70
|
71.70
|
1.00
|
62.50
|
88.0
|
71.70
|
72.40
|
0.70
|
41.70
|
24.1
|
72.40
|
73.10
|
0.70
|
16.10
|
27.3
|
LC20-163
|
|
|
|
|
|
Results
pending
|
LC20-164
|
|
|
|
|
|
Results
pending
|
LC20-165
|
60.80
|
61.30
|
0.50
|
13.90
|
79.7
|
32.73 g/t Au and 33.7
g/t Ag over 3.1m
|
61.30
|
62.60
|
1.30
|
29.90
|
30.0
|
62.60
|
63.90
|
1.30
|
42.80
|
19.8
|
LC20-166 to
196
|
|
|
|
|
|
Results
pending****
|
|
The mineralized
intervals shown above utilize a 1.0 g/t gold cut-off grade with not
more than 1.0 meter of internal dilution. *Lengths are reported as
core lengths. True widths vary depending on drill hole dip, the
veins are shallow dipping and typical true widths are 80-100% of
the downhole width. **Indicates previously released assay results.
***Indicates assays determined using the metallic screening method.
****Only a portion of the hole has been received
|
Sampling, Assaying, QA/QC and Data Verification
Drill core was continuously sampled from inception to
termination of the drill hole. Sample intervals were typically one
meter. Drill core diameter was HQ (6.35 centimeters). Geologic
and geotechnical data was captured into a digital database, core
was photographed, then one-half split of the core was collected for
analysis and one-half was retained in the core
library. Samples were kept in a secured logging and storage
facility until such time that they were delivered to the
Managua facilities of Bureau
Veritas and pulps were sent to the Bureau Veritas laboratory in
Vancouver for analysis. Gold was
analyzed by standard fire assay fusion, 30 gram aliquot, AAS
finish. Samples returning over 10.0 g/t gold are analyzed
utilizing standard Fire Assay-Gravimetric method. Due to the
presence of coarse gold, the Company has used 500-gram metallic
screened gold assays for analyzing samples from mineralized veins
and samples immediately above and below drilled veins. This method,
which analyzes a larger sample, can be more precise in high-grade
vein systems containing coarse gold. All reported drill results in
this press release using the metallic screening method are
indicated. The Company follows industry standards in its
QA&QC procedures. Control samples consisting of duplicates,
standards, and blanks were inserted into the sample stream at a
ratio of 1 control sample per every 10 samples. Analytical results
of control samples confirmed reliability of the assay data. No
top cut has been applied to the reported assay results.
Qualified Person
John M. Kowalchuk, P.Geo, a
geologist and qualified person (as defined under National
Instrument 43-101) has read and approved the technical information
contained in this press release. Mr. Kowalchuk is a senior
geologist and a consultant to the Company.
On behalf of the Board,
Akiba
Leisman
Chief Executive Officer
About Mako
Mako Mining Corp. is a publicly listed gold mining, development
and exploration firm. The Company is developing its high-grade San
Albino gold project in Nueva
Segovia, Nicaragua. Mako's
primary objective is to bring San Albino into production quickly
and efficiently, while continuing exploration of prospective
targets in Nicaragua.
Forward-Looking Statements: Some of the
statements contained herein may be considered "forward-looking
information" within the meaning of applicable securities
laws. Forward-looking information is based on certain
expectations and assumptions, including that the results pending
from the remaining 52 additional drill holes for which the Company
is awaiting results from the laboratory will support strike and dip
continuity of gold mineralization; that the Company's exploration
programs will be successfully completed; that a maiden resource at
the Mango Zone may be delineated as a result of the Company's 2020
drilling; and that the Company will be successful in any financing
plans necessary for drilling and construction at the San Albino
project. Such forward-looking information is subject to a variety
of risks and uncertainties which could cause actual events or
results to differ materially from those reflected in the
forward-looking information, including, without limitation, the
risks that additional satisfactory exploration results at the Mango
zone will not be obtained; the risk that the Company's drilling at
Las Conchitas in 2020 will not delineate a maiden resource at the
Mango Zone; that exploration results will not translate into the
discovery of an economically viable deposit; risks and
uncertainties relating to political risks involving the Company's
exploration and development of mineral properties interests; the
inherent uncertainty of cost estimates and the potential for
unexpected costs and expense; commodity price fluctuations, the
inability or failure to obtain adequate financing on a timely basis
and other risks and uncertainties. Such information contained
herein represents management's best judgment as of the date hereof,
based on information currently available and is included for the
purposes of providing investors with the Company's plans and
expectations at its San Albino project and the Las Conchitas area,
and may not be appropriate for other purposes.
Neither the TSX Venture Exchange nor its Regulation Services
Provider (as that term is defined in the policies of the TSX
Venture Exchange) accepts responsibility for the adequacy or
accuracy of this release.
SOURCE Mako Mining Corp.