VANCOUVER, BC, Oct. 6, 2022
/CNW/ - Silvercorp Metals Inc. ("Silvercorp" or the "Company")
(TSX: SVM) (NYSE American: SVM) is pleased to report assay results
from its ongoing drilling program at the LMW mine within the Ying
Mining District in China.
From October 1, 2021 to
September 30, 2022, a total of 56,803
metres ("m") in 416 diamond drill holes, including 372 underground
holes and 44 surface holes, were completed at the LMW mine. Assay
results for 378 holes have been received and selected results are
presented in Table 1 below. Currently, two surface and eight
underground rigs are drilling at the LMW mine.
The assay results released here have not been included in the
most recent "MINERAL RESERVES AND RESOURCES" update with a cut-off
date of December 31, 2021 (see news
release dated September 21,
2022).
1) New Discovery of
High-Grade Silver-Lead-Zinc Veins at the West of LMW Outside
Current Mining Areas
Drilling at the west side of LMW, where there has been no
previous mining activity, intersected new high-grade
silver-lead-zinc veins, including W1, W2, W2W, W6, W6E, W6W, and
W18. Among these, veins W2, W1 and W18 may have lengths of
over 800 m along strike and
400 m down-dip from 1100 m to 700 m
elevation. To pursue this new discovery, the Company has
started to develop two new horizontal tunnels from surface at
1040 m and 988
m elevations, and a new branch off-ramp from 800 m to 700 m
elevations to access these veins.
Highlights of these new discovery holes are as follows:
- Hole ZKX0818 intersected a 3.18
m interval (2.82 m true width)
of vein W2 grading 2,238 grams per tonne ("g/t") silver ("Ag"),
5.90% lead ("Pb"), 0.61% zinc ("Zn"), and 0.36% copper ("Cu") at
the 1,045 m elevation;
- Hole ZKX0634 intersected a 4.03
m interval (3.43 m true width)
of vein W6W grading 970 g/t Ag, 16.20% Pb, 0.60% Zn, and 0.29% Cu,
at the 1,031 m elevation
- Hole ZKX0636 intersected a 1.18
m interval (0.91 m true width)
of vein W1 grading 2,511 g/t Ag, 3.45% Pb, 1.01% Zn, and 0.38% Cu,
at the 963 m elevation; and
- Hole ZKX14214 intersected a 6.58 m interval (1.19
m true width) of vein W18 grading 646 g/t Ag, 3.12% Pb, 0.3%
Zn, and 0.16% Cu, at the1039 m elevation.
2) Drilling of Low
Angle Gold-Copper-Silver Veins Further Improved Continuity of
Mineralization
Drilling of the low angle copper-gold-silver veins of LM21,
LM22, LM26 and LM50 was designed to better understand this new type
of mineralization which is strongly altered by silicification, with
less obvious contact with host rocks of Archean granitic
gneisses. The lower angle copper-gold structures were also
offset slightly by sub-vertical north-west and north-east trending
silver-lead veins which have been the focus of mining production at
LMW. With the drilling program designed to expand gold-copper
structures, and with better understanding, the Company is learning
how to mine these low angle gold-copper bodies.
Highlights of the intercepts from the low angle gold veins at
the LMW mine:
- Hole ZKX03X021 intersected a 7.03 m interval (5.39
m true width) of vein LM26 grading 0.17 g/t gold ("Au"),
2,896 g/t Ag, and 2.58% Cu, at the 602
m elevation;
- Hole ZKX11238 intersected a 9.54 m interval (3.37
m true width) of vein LM26 grading 0.98 g/t Au, 1,323 g/t
Ag, 7.45% Pb, 0.55% Zn, and 0.32% Cu, at the 670 m elevation;
- Hole ZKX11223 intersected a 6.57 m interval (3.2
m true width) of vein LM26 grading 1.23 g/t Au, 1,780 g/t
Ag, 16.71% Pb, 0.69% Zn, and 0.23% Cu, at the 670 m elevation;
- Hole ZKX07X031 intersected an 8.10 m interval (4.06
m true width) of vein LM50 grading 1.26 g/t Au, 674 g/t Ag,
1.28% Pb, 0.21% Zn, and 0.09% Cu at the 799
m elevation;
- Hole ZKX07X021 intersected an 1.01 m interval (0.65
m true width) of vein LM50 grading 19.2 g/t Au and 15 g/t Ag
at the 791 m elevation;
- Hole ZKX05X079 intersected a 4.21 m interval (3.42
m true width) of vein LM50 grading 6.36 g/t Au and 11 g/t Ag
at the 794 m elevation;
- Hole ZKX05X098 intersected a 0.77 m interval (0.70
m true width) of vein LM22 grading 29.00 g/t Au, 10 g/t Ag,
and 1.21% Cu at the 850 m elevation;
and
- Hole ZKX05X096 intersected a 0.51 m interval (0.38
m true width) of vein LM22 grading 32.50 g/t Au, 2 g/t Ag,
and 0.05% Cu, at the 848 m
elevation.
3) Drilling Above or
Beneath Previously Mined Stopes
Most holes in this period targeted blocks of known
silver-lead-zinc veins in the production areas that were previously
missed due to limited drilling or tunneling, changes in the strikes
and dips, and/or pinch-swelling of the pay-zones in the veins. The
high-grade intercepts are mainly associated with the
southwest-striking LM7 series, LM12 series and LM17 series of
veins, and the northwest-striking LM8 series, LM19 and LM20E.
Highlights of the high-grade silver-lead-zinc mineralization in
the production areas:
- Hole ZKX07X003 intersected a 13.31 m interval (12.80
m true width) of vein LM7 grading 365 g/t Ag, 0.71% Pb,
0.13% Zn, 0.06 g/t Au, and 0.33% Cu at the 778 m elevation;
- Hole ZKX0733 intersected a 1.46
m interval (1.37 m true width)
of vein LM12E grading 4,549 g/t Ag, 1.19% Pb, 0.24% zinc ("Zn"),
0.49 g/t Au, and 0.10% copper ("Cu") at the 645 m elevation;
- Hole ZKX0058 intersected a 3.40
m interval (3.39 m true width)
of vein LM7W grading 1,181 g/t Ag, 2.49% Pb, 0.24% Zn, 0.12 g/t Au,
and 0.21% Cu at the 771 m
elevation;
- Hole ZKX05X075 intersected a 4.16
m interval (3.72 m true width)
of vein LM7 grading 360 g/t Ag, 1.75% Pb, 0.59% Zn, 9.15 g/t Au,
and 0.24% Cu at the 764 m elevation;
and
- Hole ZKX09X001 intersected a 5.78
m interval (5.53 m true width)
of vein LM7W grading 531 g/t Ag, 1.06% Pb, 0.37% Zn, 0.02 g/t Au,
and 0.19% Cu at the 575 m
elevation.
4) Drilling Intersected High-Grade
Silver-Lead-Zinc Veins and a New Gold Structure at the East Side of
the Resource Area
At the east side of the resource area, drilling intersected
high-grade silver-lead-zinc vein LM41E and the parallel
silver-lead-zinc veins LM41E1 and LM41E1Wa with true widths up to
2.40 m.
While drilling these LM41 series high grade silver-lead-zinc
veins, a new gently dipping gold vein has been discovered with
three drill holes, ZKX10944, ZKX10735, and ZKX10739 intercepting
high grade gold, which are approximately 450
m east of those intercepts on the LM50 gold structure.
Highlights of the high-grade silver-lead-zinc mineralization at
the northwest and east sides of the LMW mine:
- Hole ZKX1166 intersected a 1.36
m interval (1.23 m true width)
of vein LM41E grading 2,415 g/t Ag, 2.61% Pb, 0.40% Zn, 0.05 g/t
Au, and 0.90% Cu at the 778 m
elevation; and
- Hole ZKX1143 intersected a 3.11
m interval (2.40 m true width)
of vein LM41E grading 993 g/t Ag, 1.35% Pb, 0.54% Zn, 0.05 g/t Au,
and 0.12% Cu at the 754 m
elevation.
- Hole ZKX09X033 intersected a 1.3 m interval (0.88
m true width) of vein LM41EWa grading 1976 g/t Ag, 1.74% Pb,
0.45% Zn, 0.79 g/t Au, and 0.23% Cu at the 706 m elevation.
- Hole ZKX10944 intersected a 2.13 m interval (2.0
m true width) of a new gently dipping gold vein grading 478
g/t Ag, 2.14% Pb, 0.9% Zn, and 5.97 g/t Au, at the 763 m elevation
- Hole ZKX10735 intersected a 1.18 m interval (1.18
m true width) of the new gently dipping gold vein grading
5.37 g/t Au at the 760 m
elevation
- Hole ZKX10739 intersected a 0.95 m interval (0.95
m true width) of the new gently dipping gold vein grading
5.65 g/t Au at the 754 m
elevation
Table 1: Selected intercepts from
the 2022 drilling program at the LMW mine
Hole
ID
|
From
(m)
|
To
(m)
|
Elevation
(m)
|
Interval
(m)
|
True Width
(m)
|
Ag
(g/t)
|
Pb
(%)
|
Zn
(%)
|
Au
(g/t)
|
Cu
(%)
|
Vein
|
Ore
Type
|
High-Grade
Silver-Lead-Zinc Veins at the West of LMW Outside Current Mining
Areas
|
ZKX0432
|
185.86
|
186.97
|
787
|
1.11
|
0.75
|
323
|
0.75
|
0.86
|
0.03
|
0.06
|
W1
|
Ag-Pb-Zn
|
ZKX0438
|
144.83
|
145.86
|
862
|
1.03
|
0.96
|
315
|
1.83
|
0.22
|
0.05
|
0.03
|
W1
|
Ag-Pb-Zn
|
ZKX0460
|
161.61
|
163.12
|
849
|
1.51
|
1.12
|
217
|
6.49
|
0.19
|
0.03
|
0.03
|
W1
|
Ag-Pb-Zn
|
ZKX0463
|
171.36
|
173.68
|
817
|
2.32
|
1.91
|
510
|
4.26
|
2.25
|
0.07
|
0.12
|
W1
|
Ag-Pb-Zn
|
ZKX0636
|
146.74
|
147.92
|
963
|
1.18
|
0.91
|
2,511
|
3.45
|
1.01
|
0.05
|
0.38
|
W1
|
Ag-Pb-Zn
|
ZKX0815
|
142.93
|
143.64
|
985
|
0.71
|
0.49
|
73
|
12.84
|
0.07
|
0.05
|
0.02
|
W1
|
Ag-Pb-Zn
|
ZKX0819
|
18.49
|
21.56
|
1,082
|
3.07
|
2.17
|
178
|
1.00
|
0.04
|
0.01
|
0.06
|
W1
|
Ag-Pb-Zn
|
ZKX0820
|
21.73
|
24.45
|
1,077
|
2.72
|
1.64
|
706
|
1.02
|
0.12
|
0.05
|
0.26
|
W1
|
Ag-Pb-Zn
|
ZKX1005
|
53.60
|
54.58
|
897
|
0.98
|
0.95
|
381
|
5.30
|
0.13
|
0.05
|
0.04
|
W1
|
Ag-Pb-Zn
|
ZKX14213
|
120.64
|
121.77
|
911
|
1.13
|
0.70
|
396
|
0.39
|
0.06
|
0.05
|
0.03
|
W1
|
Ag-Pb-Zn
|
ZKX0815
|
137.63
|
138.40
|
988
|
0.77
|
0.53
|
1,891
|
1.78
|
0.84
|
0.05
|
0.31
|
W18
|
Ag-Pb-Zn
|
ZKX14214
|
139.43
|
146.01
|
1,039
|
6.58
|
1.19
|
646
|
3.12
|
0.30
|
0.05
|
0.16
|
W18
|
Ag-Pb-Zn
|
ZKX0819
|
61.43
|
61.93
|
1,049
|
0.50
|
0.35
|
1,212
|
1.27
|
0.49
|
0.01
|
0.49
|
W18E
|
Ag-Pb-Zn
|
ZKX0817
|
4.20
|
5.12
|
1,095
|
0.92
|
0.79
|
300
|
0.50
|
0.03
|
0.05
|
0.08
|
W1E
|
Ag-Pb-Zn
|
ZKX0818
|
69.16
|
70.07
|
1,055
|
0.91
|
0.80
|
539
|
0.33
|
0.18
|
0.05
|
0.08
|
W1E
|
Ag-Pb-Zn
|
ZKX0819
|
84.20
|
85.62
|
1,031
|
1.42
|
1.02
|
198
|
0.32
|
0.06
|
0.01
|
0.04
|
W1E
|
Ag-Pb-Zn
|
ZKX0650
|
105.92
|
106.52
|
993
|
0.60
|
0.32
|
1
|
0.01
|
0.01
|
7.13
|
0.09
|
W1E2
|
Ag-Pb-Zn
|
ZKX0450
|
69.19
|
71.38
|
1,031
|
2.19
|
1.36
|
1,216
|
6.77
|
0.61
|
0.05
|
0.18
|
W2
|
Ag-Pb-Zn
|
ZKX0465
|
58.47
|
60.69
|
1,041
|
2.22
|
1.26
|
831
|
2.70
|
0.26
|
0.02
|
0.29
|
W2
|
Ag-Pb-Zn
|
ZKX0636
|
103.95
|
104.67
|
993
|
0.72
|
0.56
|
667
|
0.56
|
0.27
|
2.61
|
0.38
|
W2
|
Ag-Pb-Zn
|
ZKX0650
|
64.26
|
65.46
|
1,022
|
1.20
|
0.64
|
256
|
0.47
|
0.16
|
0.01
|
0.03
|
W2
|
Ag-Pb-Zn
|
ZKX0651
|
69.77
|
70.70
|
1,052
|
0.93
|
0.54
|
1,537
|
0.60
|
0.15
|
0.03
|
0.34
|
W2
|
Ag-Pb-Zn
|
ZKX0818
|
84.14
|
87.32
|
1,045
|
3.18
|
2.82
|
2,238
|
5.90
|
0.61
|
0.07
|
0.36
|
W2
|
Ag-Pb-Zn
|
ZKX0819
|
118.25
|
119.25
|
1,005
|
1.00
|
0.72
|
1,622
|
1.96
|
0.20
|
0.01
|
0.04
|
W2
|
Ag-Pb-Zn
|
ZKX0039
|
126.57
|
127.39
|
879
|
0.82
|
0.77
|
80
|
4.30
|
2.75
|
0.03
|
0.01
|
W6
|
Ag-Pb-Zn
|
ZKX0046
|
132.12
|
133.44
|
817
|
1.32
|
0.75
|
73
|
6.62
|
0.39
|
0.05
|
0.01
|
W6
|
Ag-Pb-Zn
|
ZKX0431
|
198.49
|
199.92
|
825
|
1.43
|
1.18
|
471
|
1.04
|
0.36
|
0.05
|
0.19
|
W6
|
Ag-Pb-Zn
|
ZKX0454
|
175.59
|
176.32
|
861
|
0.73
|
0.66
|
367
|
5.75
|
1.21
|
0.21
|
0.04
|
W6
|
Ag-Pb-Zn
|
ZKX14005
|
141.48
|
142.40
|
924
|
0.92
|
0.87
|
307
|
2.37
|
0.32
|
0.05
|
0.10
|
W6
|
Ag-Pb-Zn
|
ZKX14404
|
104.79
|
106.35
|
893
|
1.56
|
1.56
|
150
|
2.34
|
1.22
|
0.05
|
0.03
|
W6
|
Ag-Pb-Zn
|
ZKX0454
|
186.46
|
187.85
|
856
|
1.39
|
1.25
|
398
|
0.81
|
0.16
|
0.05
|
0.03
|
W6E
|
Ag-Pb-Zn
|
ZKX0454
|
243.14
|
243.74
|
832
|
0.60
|
0.54
|
52
|
10.14
|
0.39
|
0.05
|
0.00
|
W6E2
|
Ag-Pb-Zn
|
ZKX0438
|
100.57
|
101.58
|
884
|
1.01
|
0.94
|
43
|
1.12
|
0.22
|
1.74
|
0.02
|
W6W
|
Ag-Pb-Zn
|
ZKX0439
|
98.03
|
98.78
|
910
|
0.75
|
0.74
|
483
|
3.22
|
0.95
|
0.05
|
0.12
|
W6W
|
Ag-Pb-Zn
|
ZKX0634
|
56.04
|
60.07
|
1,031
|
4.03
|
3.43
|
970
|
16.20
|
0.60
|
0.10
|
0.29
|
W6W
|
Ag-Pb-Zn
|
ZKX13630
|
137.23
|
137.74
|
1,014
|
0.51
|
0.45
|
1,077
|
4.84
|
0.48
|
0.02
|
0.54
|
W6W
|
Ag-Pb-Zn
|
Low Angle
Gold-Copper-Silver Veins
|
ZKX0082
|
292.17
|
293.61
|
878
|
1.44
|
0.76
|
73
|
0.54
|
0.52
|
13.06
|
1.70
|
LM22
|
Au-Ag-Cu
|
ZKX05X096
|
77.81
|
78.32
|
848
|
0.51
|
0.38
|
2
|
0.01
|
0.02
|
32.50
|
0.05
|
LM22
|
Au-Ag-Cu
|
ZKX05X097
|
84.82
|
85.77
|
855
|
0.95
|
0.72
|
37
|
0.00
|
0.03
|
1.63
|
7.39
|
LM22
|
Au-Ag-Cu
|
ZKX05X098
|
76.67
|
77.44
|
850
|
0.77
|
0.70
|
10
|
0.00
|
0.01
|
29.00
|
1.21
|
LM22
|
Au-Ag-Cu
|
ZKX05X100
|
76.16
|
77.14
|
845
|
0.98
|
0.70
|
1
|
0.00
|
0.01
|
3.40
|
0.14
|
LM22
|
Au-Ag-Cu
|
ZKX0+A3:U198390
|
60.86
|
61.63
|
640
|
0.77
|
0.58
|
37
|
0.01
|
0.03
|
0.92
|
5.43
|
LM26
|
Au-Ag-Cu
|
ZKX0188
|
16.94
|
17.97
|
737
|
1.03
|
0.97
|
4
|
0.00
|
0.01
|
2.88
|
0.00
|
LM26
|
Au-Ag-Cu
|
ZKX0191
|
86.24
|
89.04
|
662
|
2.80
|
1.64
|
37
|
0.07
|
0.01
|
3.21
|
0.29
|
LM26
|
Au-Ag-Cu
|
ZKX03X021
|
98.88
|
105.91
|
602
|
7.03
|
5.39
|
2,896
|
0.15
|
0.12
|
0.17
|
2.58
|
LM26
|
Au-Ag-Cu
|
ZKX11046
|
43.05
|
43.92
|
668
|
0.87
|
0.73
|
214
|
1.34
|
0.11
|
0.03
|
0.02
|
LM26
|
Ag-Pb-Zn
|
ZKX11223
|
44.84
|
51.41
|
670
|
6.57
|
3.20
|
1780
|
16.71
|
0.69
|
1.23
|
0.23
|
LM26
|
Au-Cu-Ag
|
ZKX11238
|
44.05
|
53.59
|
670
|
9.54
|
3.37
|
1,323
|
7.45
|
0.55
|
0.98
|
0.32
|
LM26
|
Au-Ag-Cu
|
ZKX0251
|
20.25
|
22.01
|
784
|
1.76
|
1.20
|
140
|
3.19
|
0.29
|
1.38
|
0.12
|
LM50
|
Au-Ag
|
ZKX0341
|
165.20
|
166.10
|
737
|
0.90
|
0.60
|
15
|
0.01
|
0.02
|
5.59
|
1.74
|
LM50
|
Au-Ag
|
ZKX03X054
|
168.91
|
169.90
|
818
|
0.99
|
0.84
|
4
|
0.01
|
0.02
|
2.53
|
0.01
|
LM50
|
Au-Ag
|
ZKX03X055
|
164.35
|
165.47
|
803
|
1.12
|
0.75
|
60
|
1.42
|
0.06
|
2.04
|
0.01
|
LM50
|
Au-Ag
|
ZKX0571
|
53.42
|
55.91
|
808
|
2.49
|
2.05
|
15
|
0.03
|
0.04
|
3.63
|
0.01
|
LM50
|
Ag-Pb-Zn
|
ZKX05X004
|
61.26
|
62.28
|
807
|
1.02
|
0.95
|
5
|
0.02
|
0.03
|
3.11
|
0.00
|
LM50
|
Ag-Pb-Zn
|
ZKX05X007
|
68.87
|
70.20
|
791
|
1.33
|
1.17
|
1
|
0.20
|
0.03
|
2.44
|
0.00
|
LM50
|
Ag-Pb-Zn
|
ZKX05X009
|
86.06
|
87.12
|
786
|
1.06
|
0.77
|
11
|
0.16
|
0.17
|
7.15
|
0.00
|
LM50
|
Ag-Pb-Zn
|
ZKX05X010
|
98.40
|
99.68
|
781
|
1.28
|
0.78
|
10
|
0.40
|
0.22
|
5.63
|
0.01
|
LM50
|
Ag-Pb-Zn
|
ZKX05X017
|
81.66
|
83.20
|
786
|
1.54
|
1.12
|
10
|
0.12
|
0.06
|
7.78
|
0.01
|
LM50
|
Ag-Pb-Zn
|
ZKX05X078
|
14.29
|
15.22
|
789
|
0.93
|
0.61
|
12
|
0.34
|
0.08
|
3.90
|
0.01
|
LM50
|
Au-Ag
|
ZKX05X079
|
6.45
|
10.66
|
794
|
4.21
|
3.42
|
11
|
0.38
|
0.13
|
6.36
|
0.00
|
LM50
|
Au-Ag
|
ZKX0727
|
73.32
|
74.30
|
804
|
0.98
|
0.74
|
26
|
0.13
|
0.17
|
6.71
|
0.00
|
LM50
|
Ag-Pb-Zn
|
ZKX0780
|
100.97
|
102.20
|
797
|
1.23
|
0.52
|
20
|
0.31
|
0.48
|
4.21
|
0.01
|
LM50
|
Ag-Pb-Zn
|
ZKX07X002
|
26.14
|
28.50
|
788
|
2.36
|
2.28
|
24
|
0.78
|
0.12
|
5.51
|
0.03
|
LM50
|
Au-Ag
|
ZKX07X003
|
22.58
|
23.64
|
786
|
1.06
|
1.00
|
140
|
3.40
|
0.30
|
5.65
|
0.06
|
LM50
|
Au-Ag
|
ZKX07X021
|
17.26
|
18.27
|
791
|
1.01
|
0.65
|
15
|
0.16
|
0.32
|
19.20
|
0.00
|
LM50
|
Au-Ag
|
ZKX07X025
|
18.44
|
20.06
|
792
|
1.62
|
1.16
|
23
|
0.10
|
0.13
|
4.04
|
0.00
|
LM50
|
Au-Ag
|
ZKX07X031
|
2.93
|
11.03
|
799
|
8.10
|
4.06
|
674
|
1.28
|
0.21
|
1.26
|
0.09
|
LM50
|
Au-Ag
|
ZKX07X032
|
6.10
|
11.64
|
796
|
5.54
|
3.78
|
224
|
2.28
|
0.33
|
1.54
|
0.10
|
LM50
|
Au-Ag
|
ZKX07X033
|
19.74
|
20.78
|
789
|
1.04
|
0.28
|
3
|
0.17
|
0.15
|
11.05
|
0.01
|
LM50
|
Au-Ag
|
ZKX07X034
|
12.30
|
13.54
|
791
|
1.24
|
0.80
|
9
|
0.08
|
0.03
|
2.65
|
0.01
|
LM50
|
Au-Ag
|
ZKX07X082
|
83.96
|
84.77
|
793
|
0.81
|
0.60
|
13
|
0.37
|
0.24
|
6.24
|
0.01
|
LM50
|
Ag-Pb-Zn
|
ZKX0996
|
4.16
|
12.75
|
804
|
8.59
|
2.43
|
412
|
2.33
|
0.19
|
0.42
|
0.24
|
LM50
|
Au-Ag
|
ZKX0999
|
7.72
|
18.38
|
803
|
10.66
|
3.78
|
492
|
1.06
|
0.20
|
2.88
|
0.16
|
LM50
|
Au-Ag
|
ZKX09X018
|
8.92
|
10.23
|
792
|
1.31
|
1.11
|
3
|
0.10
|
0.01
|
4.43
|
0.01
|
LM50
|
Au-Ag
|
ZKX1172
|
3.11
|
6.14
|
800
|
3.03
|
2.26
|
155
|
2.59
|
0.07
|
3.02
|
0.08
|
LM50
|
Au-Ag
|
ZKX1173
|
0.49
|
1.61
|
801
|
1.12
|
0.78
|
105
|
2.38
|
0.12
|
1.38
|
0.08
|
LM50
|
Au-Ag
|
ZKX1175
|
2.28
|
5.78
|
800
|
3.50
|
1.30
|
158
|
2.90
|
0.12
|
0.18
|
0.07
|
LM50
|
Au-Ag
|
Veins Above or
Beneath Previously Mined Stopes
|
ZKX05X097
|
111.01
|
112.28
|
838
|
1.27
|
0.96
|
276
|
0.63
|
0.17
|
0.06
|
0.02
|
LM10W1
|
Ag-Pb-Zn
|
ZKX05X119
|
59.35
|
59.80
|
700
|
0.45
|
0.38
|
2,894
|
3.65
|
2.36
|
0.30
|
0.49
|
LM11E
|
Ag-Pb-Zn
|
ZKX0087
|
72.59
|
74.87
|
982
|
2.28
|
1.85
|
177
|
3.58
|
1.44
|
0.02
|
0.08
|
LM12
|
Ag-Pb-Zn
|
ZKX0343
|
27.05
|
27.62
|
578
|
0.57
|
0.53
|
645
|
4.95
|
0.45
|
0.02
|
0.05
|
LM12
|
Ag-Pb-Zn
|
ZKX11046
|
64.36
|
67.97
|
654
|
3.61
|
1.24
|
2,394
|
5.11
|
0.84
|
0.12
|
0.19
|
LM12_1
|
Ag-Pb-Zn
|
ZKX11442
|
128.77
|
129.59
|
514
|
0.82
|
0.70
|
366
|
9.08
|
0.06
|
0.05
|
0.02
|
LM12_1
|
Ag-Pb-Zn
|
ZKX11225
|
16.50
|
17.02
|
690
|
0.52
|
0.38
|
657
|
3.49
|
0.06
|
0.17
|
0.08
|
LM12_2
|
Ag-Pb-Zn
|
ZKX0198
|
122.51
|
124.07
|
896
|
1.56
|
1.38
|
947
|
1.08
|
0.62
|
0.05
|
0.39
|
LM12_2a
|
Ag-Pb-Zn
|
ZKX11223
|
23.89
|
35.12
|
684
|
11.23
|
2.6
|
302
|
2.66
|
0.27
|
0.06
|
0.06
|
LM12_2a
|
Ag-Pb-Zn
|
ZKX0199
|
100.62
|
103.07
|
922
|
2.45
|
1.66
|
212
|
3.04
|
0.09
|
0.07
|
0.01
|
LM12_3
|
Ag-Pb-Zn
|
ZKX01X016
|
93.15
|
94.07
|
906
|
0.92
|
0.58
|
305
|
2.10
|
0.10
|
0.00
|
0.19
|
LM12_3
|
Ag-Pb-Zn
|
ZKX11026
|
68.98
|
69.65
|
659
|
0.67
|
0.50
|
331
|
9.91
|
0.02
|
0.16
|
0.11
|
LM12a
|
Ag-Pb-Zn
|
ZKX0342
|
59.11
|
59.76
|
580
|
0.65
|
0.57
|
343
|
2.12
|
0.11
|
0.02
|
0.02
|
LM12E
|
Ag-Pb-Zn
|
ZKX0733
|
142.98
|
144.44
|
645
|
1.46
|
1.37
|
4,549
|
1.19
|
0.24
|
0.49
|
0.10
|
LM12E
|
Ag-Pb-Zn
|
ZKX09X003
|
30.13
|
31.03
|
577
|
0.90
|
0.86
|
231
|
10.27
|
0.78
|
0.02
|
0.53
|
LM12E
|
Ag-Pb-Zn
|
ZKX11024
|
97.67
|
98.72
|
631
|
1.05
|
0.74
|
294
|
0.41
|
0.18
|
0.03
|
0.01
|
LM12E
|
Ag-Pb-Zn
|
ZKX11026
|
89.38
|
90.79
|
648
|
1.41
|
1.05
|
1,270
|
2.06
|
0.44
|
0.18
|
0.06
|
LM12E
|
Ag-Pb-Zn
|
ZKX0198
|
60.64
|
63.57
|
912
|
2.93
|
2.59
|
909
|
0.33
|
0.39
|
0.05
|
0.50
|
LM13
|
Ag-Pb-Zn
|
ZKX11602
|
38.65
|
40.41
|
585
|
1.76
|
1.72
|
54
|
6.19
|
0.05
|
0.02
|
0.02
|
LM13
|
Ag-Pb-Zn
|
ZKX0097
|
122.72
|
123.65
|
927
|
0.93
|
0.76
|
143
|
2.21
|
0.19
|
0.02
|
0.16
|
LM13W
|
Ag-Pb-Zn
|
ZKX03X022
|
15.31
|
16.10
|
688
|
0.79
|
0.76
|
176
|
5.93
|
0.03
|
0.02
|
0.01
|
LM13W
|
Ag-Pb-Zn
|
ZKX03X058
|
52.84
|
53.82
|
942
|
0.98
|
0.82
|
315
|
2.21
|
0.63
|
0.00
|
0.07
|
LM13W
|
Ag-Pb-Zn
|
ZKX03X059
|
48.58
|
49.19
|
947
|
0.61
|
0.41
|
4,558
|
1.54
|
0.26
|
0.06
|
0.49
|
LM13W
|
Ag-Pb-Zn
|
ZKX0637
|
87.27
|
88.15
|
926
|
0.88
|
0.77
|
181
|
0.97
|
0.05
|
0.02
|
0.18
|
LM13W
|
Ag-Pb-Zn
|
ZKX11436
|
112.66
|
113.67
|
541
|
1.01
|
0.94
|
1,421
|
1.90
|
0.10
|
0.05
|
0.03
|
LM14
|
Ag-Pb-Zn
|
ZKX11436
|
127.73
|
128.49
|
533
|
0.76
|
0.70
|
238
|
1.53
|
0.07
|
0.01
|
0.02
|
LM14_1
|
Ag-Pb-Zn
|
ZKX3214
|
49.27
|
50.35
|
714
|
1.08
|
0.54
|
991
|
9.38
|
0.70
|
0.04
|
0.72
|
LM16_1
|
Ag-Pb-Zn
|
ZKX0755
|
232.70
|
233.97
|
999
|
1.27
|
1.19
|
126
|
5.01
|
0.20
|
0.03
|
0.02
|
LM17
|
Ag-Pb-Zn
|
ZKX0773
|
129.58
|
132.05
|
682
|
2.47
|
1.88
|
382
|
0.69
|
0.48
|
0.05
|
0.03
|
LM17
|
Ag-Pb-Zn
|
ZKX07X054
|
92.00
|
93.03
|
748
|
1.03
|
1.00
|
163
|
11.26
|
0.17
|
0.05
|
0.02
|
LM17
|
Ag-Pb-Zn
|
ZKX07X058
|
131.16
|
132.62
|
682
|
1.46
|
1.16
|
269
|
0.70
|
0.19
|
0.02
|
0.02
|
LM17
|
Ag-Pb-Zn
|
ZKX1166
|
126.39
|
127.37
|
745
|
0.98
|
0.88
|
421
|
1.39
|
0.44
|
0.05
|
0.08
|
LM17
|
Ag-Pb-Zn
|
ZKX1169
|
330.70
|
334.88
|
983
|
4.18
|
0.94
|
284
|
10.42
|
0.76
|
0.06
|
0.06
|
LM17
|
Ag-Pb-Zn
|
ZKX1343
|
143.16
|
148.20
|
778
|
5.04
|
2.78
|
225
|
1.77
|
0.35
|
0.05
|
0.03
|
LM17
|
Ag-Pb-Zn
|
ZKX05X113
|
73.34
|
74.68
|
773
|
1.34
|
1.32
|
1,823
|
6.62
|
6.64
|
0.05
|
0.40
|
LM17a
|
Ag-Pb-Zn
|
ZKX07X058
|
122.27
|
125.76
|
691
|
3.49
|
2.78
|
323
|
1.96
|
0.28
|
0.02
|
0.12
|
LM17a
|
Ag-Pb-Zn
|
ZKX09X007
|
97.42
|
99.21
|
762
|
1.79
|
1.75
|
573
|
0.29
|
0.08
|
0.05
|
0.28
|
LM17a
|
Ag-Pb-Zn
|
ZKX1343
|
129.52
|
130.48
|
780
|
0.96
|
0.80
|
314
|
6.53
|
0.13
|
0.05
|
0.05
|
LM17a
|
Ag-Pb-Zn
|
ZKX07X058
|
97.56
|
99.63
|
713
|
2.07
|
1.65
|
90
|
7.38
|
0.17
|
0.02
|
0.08
|
LM17W
|
Ag-Pb-Zn
|
ZKX0978
|
195.61
|
196.31
|
1,067
|
0.70
|
0.65
|
852
|
0.17
|
0.37
|
0.05
|
0.35
|
LM17W
|
Ag-Pb-Zn
|
ZKX10948
|
191.52
|
192.06
|
762
|
0.54
|
0.43
|
278
|
2.77
|
0.16
|
0.08
|
0.03
|
LM17W
|
Ag-Pb-Zn
|
ZKX1187
|
109.39
|
110.30
|
773
|
0.91
|
0.49
|
309
|
0.51
|
0.08
|
0.02
|
0.18
|
LM17W
|
Ag-Pb-Zn
|
ZKX3214
|
138.14
|
139.46
|
682
|
1.32
|
1.28
|
43
|
4.45
|
0.35
|
0.02
|
0.01
|
LM17W
|
Ag-Pb-Zn
|
ZKX0755
|
152.87
|
154.27
|
1,034
|
1.40
|
1.31
|
223
|
0.06
|
0.08
|
0.03
|
0.06
|
LM17W2
|
Ag-Pb-Zn
|
ZKX07X053
|
12.30
|
13.59
|
802
|
1.29
|
1.23
|
1,050
|
1.25
|
0.60
|
0.05
|
0.15
|
LM17W2
|
Ag-Pb-Zn
|
ZKX0954
|
152.84
|
153.44
|
1,062
|
0.60
|
0.60
|
237
|
0.36
|
0.16
|
0.05
|
0.09
|
LM17W2
|
Ag-Pb-Zn
|
ZKX0955
|
199.62
|
200.15
|
925
|
0.53
|
0.41
|
2,449
|
1.10
|
0.48
|
0.02
|
0.21
|
LM17W2
|
Ag-Pb-Zn
|
ZKX09X008
|
156.15
|
157.72
|
1,044
|
1.57
|
1.14
|
293
|
0.13
|
0.07
|
0.05
|
0.02
|
LM17W2
|
Ag-Pb-Zn
|
ZKX09X053
|
165.35
|
166.04
|
1,090
|
0.69
|
0.67
|
296
|
1.65
|
0.33
|
0.05
|
0.19
|
LM17W2
|
Ag-Pb-Zn
|
ZKX1167
|
4.83
|
5.88
|
802
|
1.05
|
1.05
|
531
|
0.62
|
0.42
|
0.05
|
0.03
|
LM17W2
|
Ag-Pb-Zn
|
ZKX0058
|
38.87
|
39.49
|
778
|
0.62
|
0.62
|
235
|
0.86
|
0.12
|
0.02
|
0.05
|
LM19
|
Ag-Pb-Zn
|
ZKX0059
|
46.56
|
47.65
|
787
|
1.09
|
0.99
|
227
|
0.16
|
0.02
|
0.05
|
0.01
|
LM19
|
Ag-Pb-Zn
|
ZKX0090
|
69.68
|
70.28
|
941
|
0.60
|
0.48
|
594
|
0.81
|
0.03
|
0.03
|
0.10
|
LM19
|
Ag-Pb-Zn
|
ZKX0251
|
4.40
|
7.20
|
797
|
2.80
|
1.91
|
180
|
0.65
|
0.08
|
0.05
|
0.03
|
LM19
|
Ag-Pb-Zn
|
ZKX0258
|
97.88
|
99.34
|
929
|
1.46
|
0.89
|
191
|
3.89
|
0.31
|
0.02
|
0.06
|
LM19
|
Ag-Pb-Zn
|
ZKX03X058
|
16.42
|
17.25
|
968
|
0.83
|
0.65
|
173
|
1.73
|
0.17
|
0.01
|
0.01
|
LM19
|
Ag-Pb-Zn
|
ZKX10213
|
71.19
|
72.62
|
956
|
1.43
|
1.21
|
456
|
0.08
|
0.05
|
0.05
|
0.05
|
LM19
|
Ag-Pb-Zn
|
ZKX0231
|
46.09
|
46.79
|
940
|
0.70
|
0.64
|
379
|
1.30
|
0.03
|
0.05
|
0.10
|
LM19a
|
Ag-Pb-Zn
|
ZKX00X003
|
18.00
|
21.13
|
925
|
3.13
|
3.02
|
494
|
3.57
|
0.22
|
0.04
|
0.19
|
LM19E
|
Ag-Pb-Zn
|
ZKX0343
|
6.51
|
7.02
|
593
|
0.51
|
1.10
|
148
|
6.52
|
0.33
|
0.02
|
0.04
|
LM19E
|
Ag-Pb-Zn
|
ZKX0190
|
29.43
|
29.97
|
686
|
0.54
|
0.53
|
369
|
11.19
|
0.14
|
0.07
|
0.09
|
LM19W
|
Ag-Pb-Zn
|
ZKX03X022
|
10.76
|
11.88
|
691
|
1.12
|
1.07
|
400
|
0.39
|
0.14
|
0.23
|
0.23
|
LM19W
|
Ag-Pb-Zn
|
ZKX0552
|
24.22
|
25.35
|
743
|
1.13
|
1.12
|
223
|
0.93
|
0.16
|
0.02
|
0.06
|
LM19Wa
|
Ag-Pb-Zn
|
ZKX05X119
|
34.25
|
34.79
|
721
|
0.54
|
0.45
|
2,153
|
2.50
|
0.26
|
0.05
|
0.75
|
LM19Wa
|
Ag-Pb-Zn
|
ZKX11021
|
141.58
|
142.21
|
605
|
0.63
|
0.39
|
1,393
|
10.40
|
0.34
|
0.78
|
0.54
|
LM20
|
Ag-Pb-Zn
|
ZKX03X026
|
50.24
|
52.73
|
777
|
2.49
|
2.47
|
199
|
5.20
|
0.62
|
13.37
|
0.06
|
LM20E
|
Ag-Pb-Zn
|
ZKX05X077
|
37.90
|
38.41
|
776
|
0.51
|
0.50
|
373
|
1.64
|
0.07
|
0.02
|
0.04
|
LM20E
|
Ag-Pb-Zn
|
ZKX09X006
|
37.96
|
43.60
|
593
|
5.64
|
4.86
|
247
|
3.26
|
0.47
|
0.02
|
0.05
|
LM20E
|
Ag-Pb-Zn
|
ZKX0258
|
197.39
|
200.72
|
884
|
3.33
|
1.98
|
3
|
0.01
|
0.01
|
4.15
|
0.01
|
LM21
|
Ag-Pb-Zn
|
ZKX05X080
|
43.10
|
44.31
|
761
|
1.21
|
1.04
|
3
|
0.01
|
0.01
|
8.53
|
0.01
|
LM21
|
Ag-Pb-Zn
|
ZKX09X056
|
61.23
|
62.44
|
728
|
1.21
|
1.15
|
376
|
0.40
|
0.06
|
0.02
|
0.12
|
LM21
|
Ag-Pb-Zn
|
ZKX11436
|
42.56
|
43.78
|
576
|
1.22
|
1.13
|
122
|
2.14
|
0.10
|
0.02
|
0.02
|
LM32
|
Ag-Pb-Zn
|
ZKX11409
|
64.36
|
65.01
|
580
|
0.65
|
0.56
|
300
|
4.08
|
0.08
|
0.05
|
0.08
|
LM32E1
|
Ag-Pb-Zn
|
ZKX11411
|
60.71
|
61.73
|
575
|
1.02
|
0.94
|
271
|
0.17
|
0.13
|
0.18
|
0.04
|
LM32E1
|
Ag-Pb-Zn
|
ZKX11612
|
74.12
|
74.62
|
565
|
0.50
|
0.39
|
225
|
4.66
|
0.26
|
0.01
|
0.04
|
LM33
|
Ag-Pb-Zn
|
ZKX0053
|
18.20
|
26.24
|
785
|
8.04
|
6.75
|
210
|
3.23
|
0.14
|
0.42
|
0.35
|
LM7
|
Ag-Pb-Zn
|
ZKX0055
|
35.28
|
36.46
|
775
|
1.18
|
1.12
|
181
|
1.18
|
0.08
|
0.05
|
0.03
|
LM7
|
Ag-Pb-Zn
|
ZKX0077
|
32.13
|
33.11
|
788
|
0.98
|
0.95
|
90
|
0.31
|
1.52
|
2.02
|
1.70
|
LM7
|
Ag-Pb-Zn
|
ZKX0089
|
146.99
|
148.45
|
938
|
1.46
|
1.06
|
145
|
3.04
|
0.01
|
0.02
|
0.01
|
LM7
|
Ag-Pb-Zn
|
ZKX0229
|
139.75
|
140.69
|
929
|
0.94
|
0.80
|
641
|
1.66
|
0.10
|
0.05
|
0.06
|
LM7
|
Ag-Pb-Zn
|
ZKX03X014
|
156.63
|
157.93
|
911
|
1.30
|
1.05
|
477
|
1.12
|
0.03
|
0.13
|
0.14
|
LM7
|
Ag-Pb-Zn
|
ZKX03X015
|
130.12
|
131.12
|
875
|
1.00
|
0.91
|
948
|
0.66
|
0.09
|
0.05
|
0.17
|
LM7
|
Ag-Pb-Zn
|
ZKX05X075
|
107.56
|
111.72
|
764
|
4.16
|
3.72
|
360
|
1.75
|
0.59
|
9.15
|
0.24
|
LM7
|
Ag-Pb-Zn
|
ZKX05X080
|
112.84
|
113.82
|
698
|
0.98
|
0.85
|
248
|
0.98
|
0.04
|
0.02
|
0.02
|
LM7
|
Ag-Pb-Zn
|
ZKX07X003
|
34.16
|
47.47
|
778
|
13.31
|
12.80
|
365
|
0.71
|
0.13
|
0.06
|
0.33
|
LM7
|
Ag-Pb-Zn
|
ZKX07X030
|
60.65
|
64.80
|
774
|
4.15
|
3.79
|
447
|
0.63
|
0.05
|
0.02
|
0.13
|
LM7
|
Ag-Pb-Zn
|
ZKX07X073
|
98.47
|
104.92
|
721
|
6.45
|
5.95
|
291
|
3.88
|
0.14
|
0.02
|
0.11
|
LM7
|
Ag-Pb-Zn
|
ZKX1180
|
94.00
|
96.56
|
678
|
2.56
|
2.25
|
169
|
1.29
|
0.08
|
0.02
|
0.57
|
LM7
|
Ag-Pb-Zn
|
ZKX03X016
|
111.91
|
113.12
|
869
|
1.21
|
1.13
|
434
|
0.37
|
0.04
|
0.05
|
0.06
|
LM7a
|
Ag-Pb-Zn
|
ZKX0148
|
127.40
|
128.25
|
512
|
0.85
|
0.69
|
164
|
3.71
|
0.06
|
0.02
|
0.05
|
LM7E
|
Ag-Pb-Zn
|
ZKX0058
|
50.75
|
54.15
|
771
|
3.40
|
3.39
|
1,181
|
2.49
|
0.24
|
0.12
|
0.21
|
LM7W
|
Ag-Pb-Zn
|
ZKX0063
|
55.17
|
57.94
|
754
|
2.77
|
2.59
|
1,025
|
1.16
|
0.22
|
0.05
|
0.11
|
LM7W
|
Ag-Pb-Zn
|
ZKX0250
|
6.50
|
10.03
|
796
|
3.53
|
2.55
|
466
|
0.57
|
0.05
|
0.05
|
0.09
|
LM7W
|
Ag-Pb-Zn
|
ZKX07X003
|
13.45
|
17.35
|
792
|
3.90
|
3.74
|
373
|
2.66
|
0.06
|
0.20
|
0.06
|
LM7W
|
Ag-Pb-Zn
|
ZKX07X068
|
49.48
|
52.67
|
721
|
3.19
|
3.07
|
331
|
0.77
|
0.42
|
0.02
|
0.06
|
LM7W
|
Ag-Pb-Zn
|
ZKX0990
|
76.97
|
77.85
|
861
|
0.88
|
0.86
|
125
|
2.40
|
0.16
|
0.05
|
0.02
|
LM7W
|
Ag-Pb-Zn
|
ZKX09X001
|
48.36
|
54.14
|
575
|
5.78
|
5.53
|
531
|
1.06
|
0.37
|
0.02
|
0.19
|
LM7W
|
Ag-Pb-Zn
|
ZKX09X015
|
103.78
|
105.12
|
749
|
1.34
|
0.77
|
368
|
2.99
|
1.45
|
0.02
|
0.21
|
LM7W
|
Ag-Pb-Zn
|
ZKX09X027
|
57.79
|
58.59
|
720
|
0.80
|
0.80
|
356
|
0.71
|
0.54
|
0.02
|
0.02
|
LM7W
|
Ag-Pb-Zn
|
ZKX09X056
|
56.45
|
57.31
|
730
|
0.86
|
0.82
|
823
|
0.54
|
0.06
|
0.02
|
0.09
|
LM7W
|
Ag-Pb-Zn
|
ZKX09X057
|
59.00
|
61.54
|
732
|
2.54
|
2.42
|
219
|
0.81
|
0.41
|
0.02
|
0.11
|
LM7W
|
Ag-Pb-Zn
|
ZKX1513
|
62.91
|
64.29
|
718
|
1.38
|
1.02
|
218
|
0.89
|
0.82
|
0.02
|
0.02
|
LM7W
|
Ag-Pb-Zn
|
ZKX0230
|
33.80
|
34.81
|
954
|
1.01
|
0.91
|
271
|
0.54
|
0.05
|
0.10
|
0.17
|
LM7W1
|
Ag-Pb-Zn
|
ZKX09X002
|
41.08
|
42.17
|
586
|
1.09
|
1.00
|
242
|
2.02
|
0.36
|
0.02
|
0.19
|
LM7W1
|
Ag-Pb-Zn
|
ZKX09X056
|
40.45
|
48.27
|
736
|
7.82
|
7.43
|
250
|
0.60
|
0.07
|
0.02
|
0.04
|
LM8
|
Ag-Pb-Zn
|
ZKX07X031
|
12.09
|
13.95
|
792
|
1.86
|
0.93
|
498
|
1.37
|
0.22
|
0.02
|
0.03
|
LM8_1
|
Ag-Pb-Zn
|
ZKX10608
|
43.33
|
44.51
|
774
|
1.18
|
1.03
|
399
|
0.60
|
0.03
|
0.07
|
0.03
|
LM8_2
|
Ag-Pb-Zn
|
ZKX10837
|
102.53
|
103.04
|
879
|
0.51
|
0.32
|
1,337
|
25.77
|
8.77
|
0.02
|
0.12
|
LM8_4a
|
Ag-Pb-Zn
|
ZKX11006
|
149.12
|
150.02
|
870
|
0.90
|
0.52
|
1,101
|
1.08
|
0.43
|
0.05
|
0.06
|
LM8_4a
|
Ag-Pb-Zn
|
ZKX10831
|
102.45
|
103.13
|
885
|
0.68
|
0.35
|
882
|
35.24
|
1.67
|
0.02
|
0.09
|
LM8_4E
|
Ag-Pb-Zn
|
ZKX07X028
|
41.67
|
42.82
|
734
|
1.15
|
1.09
|
181
|
23.06
|
2.03
|
0.02
|
0.01
|
LM8a
|
Ag-Pb-Zn
|
ZKX07X002
|
11.85
|
12.39
|
796
|
0.54
|
0.52
|
562
|
1.35
|
0.07
|
0.05
|
0.20
|
LM8W
|
Ag-Pb-Zn
|
ZKX07X004
|
10.33
|
11.55
|
799
|
1.22
|
1.11
|
427
|
1.73
|
0.07
|
0.02
|
0.07
|
LM8W
|
Ag-Pb-Zn
|
ZKX07X020
|
9.02
|
12.33
|
797
|
3.31
|
3.10
|
152
|
1.34
|
0.03
|
0.02
|
0.02
|
LM8W
|
Ag-Pb-Zn
|
ZKX03X040
|
6.82
|
8.00
|
907
|
1.18
|
0.73
|
404
|
0.15
|
0.16
|
0.01
|
0.03
|
N/A
|
Ag-Pb-Zn
|
ZKX0431
|
189.20
|
190.30
|
830
|
1.10
|
0.91
|
477
|
3.26
|
0.79
|
0.05
|
0.04
|
N/A
|
Ag-Pb-Zn
|
ZKX0436
|
279.65
|
280.37
|
710
|
0.72
|
0.52
|
341
|
1.23
|
0.46
|
0.09
|
0.03
|
N/A
|
Ag-Pb-Zn
|
ZKX0454
|
57.83
|
58.69
|
912
|
0.86
|
0.77
|
184
|
0.31
|
0.22
|
0.05
|
0.04
|
N/A
|
Ag-Pb-Zn
|
ZKX0749
|
203.25
|
204.74
|
917
|
1.49
|
1.07
|
850
|
0.78
|
0.46
|
0.05
|
0.51
|
N/A
|
Ag-Pb-Zn
|
ZKX07X073
|
19.19
|
20.00
|
745
|
0.81
|
0.75
|
335
|
2.23
|
0.06
|
0.02
|
0.22
|
N/A
|
Ag-Pb-Zn
|
ZKX1166
|
47.45
|
47.97
|
781
|
0.52
|
0.47
|
501
|
3.08
|
0.33
|
0.05
|
0.20
|
N/A
|
Ag-Pb-Zn
|
ZKX1343
|
41.39
|
42.41
|
796
|
1.02
|
0.85
|
206
|
1.89
|
0.21
|
0.05
|
0.06
|
N/A
|
Ag-Pb-Zn
|
High-Grade
Silver-Lead-Zinc Veins and a new gold structure at theEast
Side of the Resource Area
|
ZKX07X076
|
67.73
|
68.34
|
789
|
0.61
|
0.58
|
339
|
3.05
|
0.50
|
0.02
|
0.07
|
LM41E
|
Ag-Pb-Zn
|
ZKX09X031
|
93.91
|
94.88
|
719
|
0.97
|
0.79
|
187
|
5.44
|
0.28
|
0.05
|
0.08
|
LM41E
|
Ag-Pb-Zn
|
ZKX09X032
|
77.77
|
78.70
|
737
|
0.93
|
0.65
|
190
|
1.99
|
0.18
|
0.02
|
0.09
|
LM41E
|
Ag-Pb-Zn
|
ZKX09X033
|
106.67
|
109.00
|
702
|
2.33
|
1.58
|
331
|
1.27
|
0.13
|
0.05
|
0.08
|
LM41E
|
Ag-Pb-Zn
|
ZKX10944
|
103.54
|
105.03
|
776
|
1.49
|
1.40
|
541
|
0.58
|
0.07
|
0.04
|
0.06
|
LM41E
|
Ag-Pb-Zn
|
ZKX10944
|
153.01
|
155.14
|
763
|
2.13
|
2.00
|
478
|
2.14
|
0.90
|
5.97
|
0.08
|
N/A
|
Au-Ag
|
ZKX10949
|
97.37
|
97.91
|
765
|
0.54
|
0.52
|
495
|
0.60
|
0.10
|
0.05
|
0.06
|
LM41E
|
Ag-Pb-Zn
|
ZKX1143
|
58.13
|
61.24
|
754
|
3.11
|
2.40
|
993
|
1.35
|
0.54
|
0.05
|
0.12
|
LM41E
|
Ag-Pb-Zn
|
ZKX1166
|
53.63
|
54.99
|
778
|
1.36
|
1.23
|
2,415
|
2.61
|
0.40
|
0.05
|
0.90
|
LM41E
|
Ag-Pb-Zn
|
ZKX1187
|
49.67
|
50.54
|
789
|
0.87
|
0.79
|
433
|
1.31
|
0.23
|
0.02
|
0.05
|
LM41E
|
Ag-Pb-Zn
|
ZKX09X034
|
98.86
|
100.48
|
717
|
1.62
|
1.00
|
341
|
16.78
|
1.32
|
0.15
|
0.09
|
LM41E1
|
Ag-Pb-Zn
|
ZKX09X033
|
102.05
|
103.35
|
706
|
1.30
|
0.88
|
1,976
|
1.74
|
0.45
|
0.79
|
0.23
|
LM41E1Wa
|
Ag-Pb-Zn
|
ZKX1166
|
39.51
|
40.37
|
785
|
0.86
|
0.78
|
850
|
0.64
|
0.23
|
0.05
|
0.06
|
LM41E1Wa
|
Ag-Pb-Zn
|
ZKX10735
|
68.32
|
69.50
|
760
|
1.18
|
1.18
|
3
|
0.01
|
0.04
|
5.37
|
0.00
|
N/A
|
Au
|
ZKX10739
|
73.70
|
74.65
|
754
|
0.95
|
0.95
|
4
|
0.02
|
0.03
|
5.65
|
0.00
|
N/A
|
Au
|
Tunneling Programs at the LMW
Mine
A total of 3,566 m of exploration
tunnels have been developed at the LMW mine during this period. The
exploration tunneling, comprised of drifting, cross-cutting and
raising, was driven along and across major mineralized vein
structures to upgrade the drill-defined mineral resources, and to
test for new parallel and splay structures.
Quality Control
Drill cores are NQ size. Drill core samples, limited by apparent
mineralization contacts or shear/alteration contacts, were split
into halves by saw cutting. The half cores are stored in the
Company's core shacks for future reference and checks, and the
other half core samples are shipped in securely sealed bags to the
Chengde Huakan 514 Geology and Minerals Test and Research Institute
in Chengde, Hebei Province,
China, 226 km northeast of
Beijing, the Zhengzhou Nonferrous
Exploration Institute Lab in Zhengzhou, Henan
Province, China, and SGS in
Tianjin, China. All three labs are
ISO9000 certified analytical labs. For analysis, the sample is
dried and crushed to minus 1mm and then split into a 200-300 g
subsample which is further pulverized to minus 200 mesh. Two
subsamples are prepared from the pulverized sample. One is digested
with aqua regia for gold analysis with atomic absorption
spectroscopy (AAS), and the other is digested with two-acids for
analysis of silver, lead, zinc and copper with AAS.
Channel samples are collected along sample lines perpendicular
to the mineralized vein structure in exploration tunnels. Spacing
between sampling lines is typically 5
m along strike. Both the mineralized vein and the altered
wall rocks are cut by continuous chisel chipping. Sample length
ranges from 0.4 m to more than
1 m, depending on the width of the
mineralized vein and the mineralization type. Channel samples are
prepared and assayed with AAS at Silvercorp's mine laboratory
(Ying Lab) located at the mill
complex in Luoning County, Henan
Province, China. The Ying
lab is officially accredited by the Quality and Technology
Monitoring Bureau of Henan
Province and is qualified to provide analytical services.
The channel samples are dried, crushed and pulverized. A 200 g
sample of minus 160 mesh is prepared for assay. A duplicate sample
of minus 1mm is made and kept in the laboratory archives. Gold is
analysed by fire assay with AAS finish, while silver, lead, zinc
and copper are assayed by two-acid digestion with AAS finish.
A routine quality assurance/quality control (QA/QC) procedure is
adopted to monitor the analytical quality at each lab. Certified
reference materials (CRMs), pulp duplicates and blanks are inserted
into each batch of lab samples. QA/QC data at the lab are attached
to the assay certificates for each batch of samples.
The Company maintains its own comprehensive QA/QC program to
ensure best practices in sample preparation and analysis of the
exploration samples. Project geologists regularly insert CRM, field
duplicates and blanks to each batch of 30 core samples to monitor
the sample preparation and analysis procedures at the labs. The
analytical quality of the labs is further evaluated with external
checks by sending approximately 3-5% of the pulp samples to higher
level labs to check for lab bias. Data from both the
Company's and the labs' QA/QC programs are reviewed on a timely
basis by project geologists.
Guoliang Ma, P. Geo., Manager of
Exploration and Resource of the Company, is the Qualified Person
for Silvercorp under NI 43-101 and has reviewed and given consent
to the technical information contained in this news release.
About Silvercorp
Silvercorp is a Canadian mining company producing silver, gold,
lead, and zinc with a long history of profitability and growth
potential. The Company's strategy is to create shareholder value by
1) focusing on generating free cashflow from long life mines; 2)
organic growth through extensive drilling for discovery; 3) ongoing
merger and acquisition efforts to unlock value; and 4) long term
commitment to responsible mining and ESG. For more information,
please visit our website at www.silvercorpmetals.com.
CAUTIONARY DISCLAIMER - FORWARD
LOOKING STATEMENTS
Certain of the statements and information in this press
release constitute "forward-looking statements" within the meaning
of the United States Private Securities Litigation Reform Act of
1995 and "forward-looking information" within the meaning of
applicable Canadian provincial securities laws. Any statements or
information that express or involve discussions with respect to
predictions, expectations, beliefs, plans, projections, objectives,
assumptions or future events or performance (often, but not always,
using words or phrases such as "expects", "is expected",
"anticipates", "believes", "plans", "projects", "estimates",
"assumes", "intends", "strategies", "targets", "goals",
"forecasts", "objectives", "budgets", "schedules", "potential" or
variations thereof or stating that certain actions, events or
results "may", "could", "would", "might" or "will" be taken, occur
or be achieved, or the negative of any of these terms and similar
expressions) are not statements of historical fact and may be
forward-looking statements or information. Forward-looking
statements or information relate to, among other things: the price
of silver and other metals; the accuracy of mineral resource and
mineral reserve estimates at the Company's material properties; the
sufficiency of the Company's capital to finance the Company's
operations; estimates of the Company's revenues and capital
expenditures; estimated production from the Company's mines in the
Ying Mining District; timing of receipt of permits and regulatory
approvals; availability of funds from production to finance the
Company's operations; and access to and availability of funding for
future construction, use of proceeds from any financing and
development of the Company's properties.
Forward-looking statements or information are subject to a
variety of known and unknown risks, uncertainties and other factors
that could cause actual events or results to differ from those
reflected in the forward-looking statements or information,
including, without limitation, social and economic impacts of
COVID-19; risks relating to: fluctuating commodity prices;
calculation of resources, reserves and mineralization and precious
and base metal recovery; interpretations and assumptions of mineral
resource and mineral reserve estimates; exploration and development
programs; feasibility and engineering reports; permits and
licenses; title to properties; property interests; joint
venture partners; acquisition of commercially mineable mineral
rights; financing; recent market events and conditions; economic
factors affecting the Company; timing, estimated amount, capital
and operating expenditures and economic returns of future
production; integration of future acquisitions into the Company's
existing operations; competition; operations and
political conditions; regulatory environment in China and Canada; environmental risks;
legislative and regulatory initiatives addressing global climate
change or other environmental concerns; foreign exchange rate
fluctuations; insurance; risks and hazards of mining operations;
key personnel; conflicts of interest; dependence on management;
internal control over financial reporting as per the requirements
of the Sarbanes-Oxley Act; and bringing actions and enforcing
judgments under U.S. securities laws.
This list is not exhaustive of the factors that may affect
any of the Company's forward-looking statements or information.
Forward-looking statements or information are statements about the
future and are inherently uncertain, and actual achievements of the
Company or other future events or conditions may differ materially
from those reflected in the forward-looking statements or
information due to a variety of risks, uncertainties and other
factors, including, without limitation, those referred to in the
Company's Annual Information Form for the year ended March 31, 2021 under the heading "Risk
Factors". Although the Company has attempted to identify
important factors that could cause actual results to differ
materially, there may be other factors that cause results not to be
as anticipated, estimated, described or intended.
Accordingly, readers should not place undue reliance on
forward-looking statements or information.
The Company's forward-looking statements and information are
based on the assumptions, beliefs, expectations and opinions of
management as of the date of this press release, and other than as
required by applicable securities laws, the Company does not assume
any obligation to update forward-looking statements and information
if circumstances or management's assumptions, beliefs, expectations
or opinions should change, or changes in any other events affecting
such statements or information. For the reasons set forth above,
investors should not place undue reliance on forward-looking
statements and information.
CAUTIONARY NOTE TO US
INVESTORS
The technical and scientific information contained herein has
been prepared in accordance with NI 43-101, which differs from the
standards adopted by the U.S. Securities and Exchange Commission
(the "SEC"). Accordingly, the technical and scientific information
contained herein, including any estimates of mineral reserves and
mineral resources, may not be comparable to similar information
disclosed by U.S. companies subject to the disclosure requirements
of the SEC.
Additional information relating to the Company, including
Silvercorp's Annual Information Form, can be obtained under the
Company's profile on SEDAR at www.sedar.com, on EDGAR at
www.sec.gov, and on the Company's website at
www.silvercorpmetals.com.
View original content to download
multimedia:https://www.prnewswire.com/news-releases/silvercorp-intercepts-new-high-grade-structures-at-lmw-mine-ying-mining-distrct-china-including-vein-lm26--5-39-metres-true-width-grading-2-896-grams-per-tonne-silver-and-2-58-copper-301642500.html
SOURCE Silvercorp Metals Inc