Qorvo® (Nasdaq:QRVO), a leading provider of innovative RF solutions
that connect the world, and D-Link, the global leader in
connectivity for homes, businesses and service providers, have
teamed to create new Wi-Fi solutions that improve performance and
extend Wi-Fi coverage throughout the home via mesh networks. D-Link
recently introduced new Covr dual-band and tri-band Wi-Fi systems
that feature Qorvo’s high-power, high-efficiency 5GHz power
amplifiers. The Covr solution was recognized with a CES 2018
Innovation Award in the Smart Home category.
Mesh networks, also known as distributed Wi-Fi networks, use
multiple routers to spread Wi-Fi signals throughout the home. This
approach offers significant benefits, including better range to
eliminate dead spots, higher capacity to support multiple
simultaneous users, high data rates that alleviate buffering, and
the ability to withstand or avoid interference. The wireless mesh
network market is expected to more than double between 2016 and
2022, from $3.57 billion to $7.44 billion.1
Qorvo’s RFPA5542 5GHz power amplifier (PA) supports 802.11ac
Wave2 Multiple-User Multiple-Input, Multiple-Output (MU-MIMO)
designs, maximizing the output power of in-home Wi-Fi signals even
as it optimizes efficiency and lowers power consumption. The Qorvo
PA also enables full use of the frequency band.
Anny Wei, president and chief executive officer of D-Link
Corporation, said, “Each of the two new Covr Whole Home Wi-Fi
Systems provide a scalable mesh Wi-Fi network that delivers
ultra-fast speeds and seamless coverage to consumers. Qorvo’s
solutions are recognized in our market for their high efficiency
and performance, which enables D-Link to design systems with the
best internet connection to the farthest reaches of the home.”
Cees Links, general manager of Qorvo’s Wireless Connectivity
business unit, said, “Qorvo’s innovative solutions for mesh
networking are helping designers solve the coverage and data rate
challenges inherent in home Wi-Fi systems. Our highly efficient PAs
help customers reduce power consumption and heat – enabling
smaller, more attractive end products. We are pleased that our
products are part of the new D-Link systems.”
Qorvo’s Wireless Connectivity business is one of the leading
developers of wireless semiconductor system solutions for connected
devices, with a broad range of advanced RF chips and software for
smart home data communications and the IoT. Qorvo is also a leading
supplier of Wi-Fi integrated front-end solutions.
Information about Qorvo solutions for this market is available
at: www.qorvo.com/applications/internet-of-things. Qorvo’s latest
white paper about the future of Wi-Fi – Where is Wi-Fi Heading? –
can be accessed here.
About QorvoQorvo (Nasdaq:QRVO) makes a better
world possible by providing innovative RF solutions at the center
of connectivity. We combine product and technology leadership,
systems-level expertise and global manufacturing scale to quickly
solve our customers' most complex technical challenges. Qorvo
serves diverse high-growth segments of large global markets,
including advanced wireless devices, wired and wireless networks
and defense radar and communications. We also leverage our unique
competitive strengths to advance 5G networks, cloud computing, the
Internet of Things, and other emerging applications that expand the
global framework interconnecting people, places and things. Visit
www.qorvo.com to learn how Qorvo connects the world.
1 “Wireless Mesh
Network Market by Component, Mesh Design, Radio Frequency,
Applications and Region – Global Forecast to 2022,” Markets and
Markets, February 2018
Qorvo is a registered trademark of Qorvo, Inc. in the U.S. and
in other countries. All other trademarks are the property of their
respective owners.
Investor Relations Contact: Doug DeLieto VP,
Investor Relations W +1-336-678-7088 |
Media Contact Wireless Connectivity: Vanessa Gaté
vanessa.gate@qorvo.com W +32-52-454439 |
About D-LinkD-Link is a global leader in
connecting people, businesses and cities. We aim to connect more
homes, small businesses, medium to large-sized enterprises, and
service providers. D-Link implements and supports unified network
solutions that integrate capabilities in switching, wireless,
broadband, storage, IP surveillance, and cloud-based network
management. An award-winning designer, developer, and manufacturer,
D-Link has grown from a group of seven friends since its founding
in 1986 in Taiwan to more than 2,000 employees worldwide.
D-Link Corporation PR Contact:Michelle
ChiangMichelle.yi.chiang@dlinkcorp.com +886-2-6600-0123 #6653
D-Link and D-Link logos are trademarks or
registered trademarks of D-Link Corporation or its subsidiaries.
All other third party marks mentioned herein may be trademarks of
their respective owners. Copyright © 2016. D-Link. All Rights
Reserved.
This press release includes "forward-looking
statements" within the meaning of the safe harbor provisions of the
Private Securities Litigation Reform Act of 1995. These
forward-looking statements include, but are not limited to,
statements about our plans, objectives, representations and
contentions and are not historical facts and typically are
identified by use of terms such as "may," "will," "should,"
"could," "expect," "plan," "anticipate," "believe," "estimate,"
"predict," "potential," "continue" and similar words, although some
forward-looking statements are expressed differently. You
should be aware that the forward-looking statements included herein
represent management's current judgment and expectations, but our
actual results, events and performance could differ materially from
those expressed or implied by forward-looking statements. We
do not intend to update any of these forward-looking statements or
publicly announce the results of any revisions to these
forward-looking statements, other than as is required under the
federal securities laws. Qorvo's business is subject to
numerous risks and uncertainties, including variability in
operating results, the inability of certain of our customers or
suppliers to access their traditional sources of credit, our
industry's rapidly changing technology, our dependence on a few
large customers for a substantial portion of our revenue, a loss of
revenue if contracts with the U.S. government or defense and
aerospace contractors are canceled or delayed, our ability to
implement innovative technologies, our ability to bring new
products to market and achieve design wins, the efficient and
successful operation of our wafer fabrication facilities, assembly
facilities and test and tape and reel facilities, our ability to
adjust production capacity in a timely fashion in response to
changes in demand for our products, variability in manufacturing
yields, industry overcapacity and current macroeconomic conditions,
inaccurate product forecasts and corresponding inventory and
manufacturing costs, dependence on third parties and our ability to
manage platform providers and customer relationships, our
dependence on international sales and operations, our ability to
attract and retain skilled personnel and develop leaders, the
possibility that future acquisitions may dilute our shareholders'
ownership and cause us to incur debt and assume contingent
liabilities, fluctuations in the price of our common stock,
additional claims of infringement on our intellectual property
portfolio, lawsuits and claims relating to our products, security
breaches and other similar disruptions compromising our information
and exposing us to liability, and the impact of stringent
environmental regulations. These and other risks and uncertainties,
which are described in more detail in Qorvo's most recent Annual
Report on Form 10-K and in other reports and statements filed with
the Securities and Exchange Commission, could cause actual results
and developments to be materially different from those expressed or
implied by any of these forward-looking statements.
Qorvo (NASDAQ:QRVO)
Historical Stock Chart
From Aug 2024 to Sep 2024
Qorvo (NASDAQ:QRVO)
Historical Stock Chart
From Sep 2023 to Sep 2024