SFES Safeguard Scientifics New (QX)

RISK FACTORS

An investment in the Company involves a significant level of risk. Investors should carefully consider the risk factors described below together with the other information included in this prospectus. If any of the risks described below occurs, or if other risks not identified below occur, our business, financial condition, and results of operations could be materially and adversely affected.

Risks Related to our Business

We have a history of operating losses, and we may not be able to achieve or sustain profitability. In addition, we may be unable to continue as a going concern.

We are a medical device company with a limited operating history. We are not profitable and have incurred losses since our inception. Substantial doubt exists about our ability to continue as a going concern as a result of recurring losses and an accumulated deficit. We continue to incur research and development and general and administrative expenses related to our operations. Our net loss for the year ended December 31, 2013 was $28.4 million, and our accumulated deficit as of December 31, 2013 was $93.3 million.

We expect to continue to incur losses for the foreseeable future, and these losses will likely increase as we prepare for clinical trials of our products and continue to commercialize our cleared or approved products. If our products fail in clinical trials or do not gain regulatory clearance or approval, or if our products do not achieve market acceptance, we may never become profitable. Even if we achieve profitability in the future, we may not be able to sustain profitability in subsequent periods. Absent a significant increase in revenue or additional equity or debt financing, we may not be able to sustain our ability to continue as a going concern. On March 31, 2014, we filed this prospectus as part of a Registration Statement on Form S-3 to register $100,000,000 of our securities for sale from time to time. Once such Registration Statement is declared effective by the SEC, we do anticipate proceeding with offerings of our securities in accordance with the shelf registration statement requirements. We cannot assure you that we will be successful in obtaining such additional financing on terms acceptable to us or at all.

We will require substantial additional funding, which may not be available to us on acceptable terms, or at all.

The net proceeds of recent financings, including the private placement financing described in the summary of this prospectus, will not be sufficient to support clinical and pre-clinical development of our products and product candidates and provide us with the necessary resources to commercialize these products and product candidates. While we are currently focused on our SurgiBot System product, we intend to advance multiple additional products through clinical and pre-clinical development in the future. We will likely need to raise substantial additional capital in order to continue our operations and achieve our business’ objectives.

8

Table of Contents

Our future funding requirements will depend on many factors, including, but not limited to:

Until we generate a sufficient amount of product revenue to finance our cash requirements, which may never occur, we expect to finance future cash needs primarily through public or private equity offerings, debt financings or strategic collaborations. We do not know whether additional funding will be available on acceptable terms, or at all. If we are not able to secure additional funding when needed, we may have to delay, reduce the scope of or eliminate one or more of our clinical trials or research and development programs. To the extent that we raise additional funds by issuing equity securities, our stockholders may experience significant dilution; and debt financing, if available, may involve restrictive covenants that limit our operations. To the extent that we raise additional funds through collaboration and licensing arrangements, it may be necessary to relinquish some rights to our products or grant licenses on terms that may not be favorable to us.

9

Table of Contents

We may fail to realize some or all of the anticipated benefits of the business combination of SafeStitch and TransEnterix Surgical, which may adversely affect the value of our common stock.

The success of the integration of TransEnterix Surgical will depend, in part, on our ability to realize the anticipated benefits and cost savings from combining the respective business and operations of SafeStitch and TransEnterix Surgical. To realize these anticipated benefits and cost savings, we must successfully combine the acquired business with our legacy operations and integrate our respective operations, technologies and personnel, which is particularly challenging given the geographic and cultural differences between the personnel and facilities based in Florida and North Carolina and the lack of experience we have in combining businesses. If we are not able to achieve these objectives within the anticipated time frame or at all, the anticipated benefits and cost savings of the acquisition may not be realized fully or at all or may take longer to realize than expected, and the value of our common stock may be adversely affected. In addition, the overall integration of the businesses is a complex, time-consuming and expensive process that, without proper planning and effective and timely implementation, could significantly disrupt our operations. Further, it is possible that the integration process could adversely affect our ability to maintain our research and development operations, result in the loss of key employees and other senior management, or to otherwise achieve the anticipated benefits of the acquisition.

Risks in integrating the respective operations of SafeStitch and TransEnterix Surgical in order to realize the anticipated benefits of the acquisition include, among other factors:

10

Table of Contents

In addition, the actual integration may result in additional and unforeseen expenses, and the anticipated benefits of the integration plan may not be realized. Actual cost synergies, if achieved at all, may be lower than we expect and may take longer to achieve than anticipated. If we are not able to adequately address these challenges, we may be unable to successfully integrate the respective operations of SafeStitch and TransEnterix Surgical, or to realize the anticipated benefits of the integration. The anticipated benefits and synergies assume a successful integration and are based on projections, which are inherently uncertain, and other assumptions. Even if integration is successful, anticipated benefits and synergies may not be achieved. An inability to realize the full extent of, or any of, the anticipated benefits of the acquisition, as well as any delays encountered in the integration process, could have an adverse effect on our business and results of operations, which may affect the value of the shares of our common stock.

We have incurred significant costs related to the merger and expect to incur additional costs as integration plans continue. If we are unable to offset the costs of the acquisition through realization of efficiencies, our financial condition, liquidity and results of operations will suffer.

We have incurred, and expect to continue to incur, various non-recurring costs associated with combining the operations of TransEnterix Surgical and SafeStitch, including, but not limited to, legal, accounting and financial advisory fees. The substantial majority of non-recurring expenses have been composed of these costs and expenses related to the execution of the acquisition, facilities and systems consolidation costs and employment-related costs. We have also incurred fees and costs related to formulating and implementing integration plans. Additional unanticipated costs may be incurred in the integration of the businesses. Although we expect that the elimination of duplicative costs, as well as the realization of other efficiencies related to the integration of the businesses, should allow us to offset incremental acquisition and acquisition-related costs over time, this net benefit may not be achieved in the near term, or at all.

We have a substantial amount of indebtedness, which may adversely affect our financial resources and our ability to operate our business.

In connection with the merger we became a party to, and jointly and severally liable for, $9.4 million of outstanding debt of TransEnterix Surgical, and the associated obligations owed by TransEnterix Surgical under a Loan and Security Agreement, dated January 17, 2012, among TransEnterix Surgical, Silicon Valley Bank and Oxford Finance LLC, as amended by a First, Second and Third Amendment, dated February 11, 2013, September 3, 2013 and October 31,

11

Table of Contents

2013, respectively. The amended Loan and Security Agreement evidences a term loan, which will mature on January 1, 2016. Our resulting substantial level of indebtedness and other financial obligations increase the possibility that we may be unable to pay, when due, the principal of, interest on, or other amounts due in respect of, our indebtedness.

Further, under the amended Loan and Security Agreement, we are subject to certain restrictive covenants that, among other things, may limit our ability to obtain additional financing for working capital requirements, product development activities, debt service requirements, and general corporate or other purposes. These restrictive covenants include, without limitation, restrictions on our ability to: (1) change the nature of our business; (2) incur additional indebtedness; (3) incur liens; (4) make certain investments; (5) make certain dispositions of assets; (6) merge, dissolve, consolidate or sell all or substantially all of our assets; and (7) enter into transactions with affiliates.

If we breach any of these restrictive covenants or are unable to pay our indebtedness under the amended Loan and Security Agreement when due, this could result in an event of default. In such event, the lenders may elect (after the expiration of any applicable notice or grace periods) to declare all outstanding borrowings, together with accrued and unpaid interest and other amounts payable under the term loan, to be immediately due and payable. Any such occurrence would have an immediate and materially adverse impact on our business and results of operations.

Some of our technologies are in an early stage of development and not yet proven. Further, our related product research and development activities may not lead to our technologies and products being commercially viable.

We are engaged in the research and development of minimally invasive surgical devices, robotic surgical devices, and intraluminal medical devices that manipulate tissues for the treatment of certain intraperitoneal abnormalities. The effectiveness of our technologies is not well known in, or may not be accepted generally by, the clinical medical community. Further, some of our products are still in early stages of development and are prone to the risks of failure inherent in medical device product development. In particular, any of our products in clinical trials may fail to show desired efficacy and safety traits despite early promising results. A number of companies in the medical device industry have suffered significant setbacks in advanced clinical trials, even after obtaining promising results at earlier points. The occurrence of any such events would have a material adverse effect on our business.

Our product research and development activities may not result in commercially viable products.

Some of our products are still in early stages of development and are prone to the risks of failure inherent in medical device product development. If required by the FDA, we may be required to undertake significant clinical trials to demonstrate to the FDA that our medical devices are safe and effective for their intended uses. We may also be required to undertake clinical trials by non-U.S. regulatory agencies. Clinical trials are expensive and uncertain processes that may take years to complete. Failure can occur at any point in the process, and early positive results do not ensure that the entire clinical trial will be successful.

12

Table of Contents

The regulatory approval and clearance processes are expensive, time-consuming and uncertain and may prevent us or our collaboration partners from obtaining approvals or clearances, as the case may be, for the commercialization of some or all of our products.

Our products are subject to rigorous regulation by the FDA and numerous other federal, state and foreign governmental authorities. The process of obtaining regulatory clearances or approvals to market a medical device can be costly and time consuming, and we may not be able to obtain these clearances or approvals on a timely basis, if at all. In particular, the FDA permits commercial distribution of a new medical device only after the device has received clearance under Section 510(k) of the Federal Food, Drug and Cosmetic Act, or is the subject of an approved premarket approval application unless the device is specifically exempt from those requirements.

In the United States, a company generally can obtain permission to distribute a new medical device in one of two ways. The first applies to any device that is substantially equivalent to a device first marketed prior to May 1976, or to another device marketed after that date, but which was substantially equivalent to a pre-May 1976 device. These devices are either Class I or Class II devices. To obtain FDA clearance to distribute the medical device, a company generally must submit a Section 510(k) submission, and receive an FDA order finding substantial equivalence to a predicate device (pre-May 1976 device or post-May 1976 device that was substantially equivalent to a pre-May 1976 device) and permitting commercial distribution of that medical device for its intended use. A 510(k) submission must provide information supporting a claim of substantial equivalence to the predicate device. If clinical data from human clinical trials are required to support the 510(k) submission, these data must be gathered in compliance with investigational device exemption, or IDE, regulations for investigations performed in the United States. The FDA review process for premarket notifications submitted pursuant to Section 510(k) takes, on average, about ninety (90) days, but it can take substantially longer if the FDA has concerns regarding the application. There is no guarantee that the FDA will “clear” a medical device for marketing, in which case the device cannot be distributed in the United States. There is also no guarantee that the FDA will deem the applicable device subject to the 510(k) process, as opposed to the more time-consuming, resource-intensive and problematic, pre-market approval, or PMA, process described below.

The second, more comprehensive, PMA process applies to a new device that is not substantially equivalent to a pre-1976 product or that is to be used in supporting or sustaining life or preventing impairment. These devices are normally Class III devices. For example, most implantable devices are subject to the PMA process. Two steps of FDA approval are generally required before a company can market a product in the United States that is subject to approval, as opposed to clearance, as a Class III device. First, a company must comply with IDE regulations in connection with any human clinical investigation of the device. These regulations permit a company to undertake a clinical study of a “non-significant risk” device without formal FDA approval. Prior express FDA approval is required if the device is a significant risk device. Second, the FDA must review the company’s PMA application. A PMA application must be supported by extensive data, including, but not limited to, technical, preclinical, clinical trial, manufacturing and labeling data, to demonstrate to the FDA’s satisfaction the safety and efficacy of the device for its intended use. Additionally, devices subject to PMA approval may be subject to a panel review to obtain market approval and are required to pass a factory inspection in

13

Table of Contents

accordance with the current “good manufacturing practices” standards in order to obtain approval. The FDA will approve the PMA application if it finds there is reasonable assurance that the device is safe and effective for its intended use. The PMA process takes substantially longer than the 510(k) process, approximately one to two years. However, in some instances the FDA may find that a device is new and not substantially equivalent to a predicate device but is also not a high risk device as is generally the case with Class III PMA devices. In these instances FDA may allow a device to be down classified from Class III to Class I or II.

The Food and Drug Administration Modernization Act of 1997 added the de novo classification option as an alternate pathway to classify novel devices of low to moderate risk that had automatically been placed in Class III after receiving a “not substantially equivalent” determination in response to a premarket notification 510(k) submission. Under current law, a company can submit a de novo classification request to the FDA for novel low to moderate risk devices without first being required to submit a 510(k) application. These types of applications are referred to as “Evaluation of Automatic Class III Designation” or “ de novo .” In instances where a device is deemed not substantially equivalent to a Class II predicate device, the candidate device may be filed as a de novo application which may lead to delays in regulatory decisions by the FDA. FDA review of a de novo application may lead the FDA to identify the device as either a Class I or II device and worthy of either an exempt or 510(k) regulatory pathway.

The FDA or other non-U.S. regulatory authorities can delay, limit or deny clearance or approval of a medical device candidate for many reasons, including:

14

Table of Contents

While we have already received FDA clearance for the SPIDER System, we continue in discussions with the FDA regarding the appropriate regulatory pathway for our SurgiBot System and our Gastroplasty Device. Obtaining approval of any PMA can be a lengthy, expensive and uncertain process. While the FDA normally reviews a premarket notification in ninety (90) days, there is no guarantee that our future products will qualify for this more expeditious regulatory process, which is reserved for Class I and II devices, nor is there any assurance, even if a device is reviewed under the 510(k) premarket notification process, that the FDA will review it expeditiously or determine that the device is substantially equivalent to a lawfully marketed non-PMA device. In the past we have been successful in receiving 510(k) clearance within the 90-day review period, but it can take longer (six to twelve months) to obtain 510(k) clearance for a Class II device. If the FDA fails to provide clearance for a product candidate, such as the SurgiBot System, then we cannot market the device. In lieu of acting on a premarket notification, the FDA may seek additional information or additional data which would further delay our ability to market the product.

The results of previous clinical experience with our devices and devices similar to those that we are developing may not be indicative of future results, and our current and planned clinical trials may not satisfy the requirements of the FDA or other non-U.S. regulatory authorities.

Positive results from limited animal trials and other early development work we have conducted or early clinical experience with the test articles or with similar devices should not be relied upon as evidence that later-stage or large-scale clinical trials will succeed. We will be required to demonstrate with substantial evidence through well-controlled clinical trials that our future Class III products are safe and effective for their intended uses. Generally, clinical data is not required to support a 510(k) application, but if applicable for our Class II products, we may require clinical data to demonstrate that the devices are substantially equivalent in terms of safety and effectiveness to devices that are already marketed under Section 510(k). We have participated in discussions with the FDA regarding the appropriate regulatory pathway for our products, primarily for the SurgiBot System. While clinical trial data for Class II devices are generally not required, we have received information from the FDA that clinical trial data may be required for the SurgiBot System to enable market clearance. Such requirements could be expensive and could delay the clearance of the SurgiBot System.

Further, our products may not be cleared or approved, as the case may be, even if the clinical data are satisfactory and support, in our view, clearance or approval. The FDA or other non-U.S. regulatory authorities may disagree with our trial design and our interpretation of the clinical data. Any of these regulatory authorities may change requirements for the clearance or approval of a product even after reviewing and providing comment on a protocol for a pivotal clinical trial that has the potential to result in FDA approval. These regulatory authorities may also clear or approve a product for fewer or more limited uses than we request or, for a Class III device, may grant approval contingent on the performance of costly post-marketing clinical trials. In addition, the FDA or other non-U.S. regulatory authorities may not approve or clear the labeling claims necessary or desirable for the successful commercialization of our products.

We are highly dependent on the success of our products, and we cannot give any assurance that our products will receive regulatory clearance or that any of our products or future products will be successfully commercialized.

We are highly dependent on the success of our products, especially the SurgiBot System. We cannot give any assurance that the FDA will grant regulatory clearance for the SurgiBot System, or will not require the more burdensome PMA submission and approval, nor can we

15

Table of Contents

give any assurance that the SurgiBot System or any of our other products will be successfully commercialized, for a number of reasons, including, without limitation, the potential introduction by our competitors of more clinically effective or cost-effective alternatives, or failure in our sales and marketing efforts. Any failure to obtain clearance or approval of our products or to successfully commercialize them would have a material and adverse effect on our business.

If our competitors develop and market products that are more effective, safer or less expensive than our products and future products, our commercial opportunities will be negatively impacted.

The life sciences industry is highly competitive, and we face significant competition from many medical device companies that are researching and marketing products designed to address minimally invasive and robotic assisted surgery. We are currently developing and commercializing medical devices that will compete with other medical devices that currently exist or are being developed. Products we may develop in the future are also likely to face competition from other medical devices and therapies. Many of our competitors have significantly greater financial, manufacturing, marketing and product development resources than we do. Large medical device companies, in particular, have extensive experience in clinical testing and in obtaining regulatory clearances or approvals for medical devices. These companies also have significantly greater research and marketing capabilities than we do. Some of the medical device companies we expect to compete with include Applied Medical, Covidien, Intuitive Surgical, Johnson & Johnson, Olympus, Stryker, USGI Medical, Endo Gastric Solutions, Inc., ValenTx, Inc., GI Dynamics, Inc., Medigus, Ltd., and a number of minimally invasive surgical device, robotic surgical device manufacturers and providers of products and therapies that are designed to reduce the need for or attractiveness of surgical intervention. In addition, many other universities and private and public research institutions are or may become active in research involving surgical devices for minimally invasive and robotic assisted surgery.

We believe that our ability to successfully compete will depend on, among other things:

16

Table of Contents

If our competitors market products that are more effective, safer, easier to use or less expensive than our products or future products, or reach the market sooner than our products, we may not achieve commercial success. In addition, the medical device industry is characterized by rapid technological change. It may be difficult for us to stay abreast of the rapid changes in each technology. If we fail to stay at the forefront of technological change, we may be unable to compete effectively. Technological advances or products developed by our competitors may render our technologies or products obsolete or less competitive.

Our product development activities could be delayed or stopped.

We do not know whether our current product development activities will result in products that meet necessary standards and performance criteria or whether the development will be completed on schedule. Delays could occur based on a number of issues that could arise. For example, should clinical trials be required, the commencement of clinical trials could be substantially delayed or prevented by several factors, including:

The completion of our clinical trials could also be substantially delayed or prevented by several factors, including:

17

Table of Contents

Our clinical trials may be suspended or terminated at any time by us, the FDA, other regulatory authorities or the institutional review board for any given clinical trial site. Any failure or significant delay in completing clinical trials for our products could materially harm our financial results and the commercial prospects for our products.

In addition, other issues such as the need to investigate third party patents and potential infringement matters, although not currently an issue, could arise, thereby delaying our development efforts.

Even if we obtain regulatory clearances or approvals for our products, the terms of such clearances or approvals, and ongoing regulation of our products may limit how we manufacture and market our products, which could materially impair our ability to generate anticipated revenues.

Once regulatory clearance or approval has been granted, the cleared or approved product and its manufacturer are subject to continual review. Any cleared or approved product may be promoted only for its indicated uses. In addition, if the FDA or other non-U.S. regulatory authorities clear or approve any of our products, the labeling, packaging, adverse event reporting, storage, advertising and promotion for the product will be subject to extensive regulatory requirements. We and the manufacturers of our products are also required to comply with the FDA’s Quality System Regulation, which includes requirements relating to quality control and quality assurance, as well as the corresponding maintenance of records and documentation as well as other quality system requirements and regulations from non-U.S. regulatory authorities. Moreover, device manufacturers are required to report adverse events by filing Medical Device Reports with the FDA, which are publicly available. Further, regulatory agencies must approve our manufacturing facilities for Class III devices before they can be used to manufacture our products, and all manufacturing facilities are subject to ongoing regulatory inspection. If we fail to comply with the regulatory requirements of the FDA, either before or after clearance or approval, or other non-U.S. regulatory authorities, or if previously unknown problems with our products, manufacturers or manufacturing processes are discovered, we could be subject to administrative or judicially imposed sanctions, including:

18

Table of Contents

In addition, the FDA and other non-U.S. regulatory authorities may change their policies and additional regulations may be enacted that could prevent or delay regulatory clearance or approval of our products. We cannot predict the likelihood, nature or extent of government regulation that may arise from future legislation or administrative action, either in the United States or abroad. If we are not able to maintain regulatory compliance, we would likely not be permitted to market our future products and we may not achieve or sustain profitability.

Current legislation and future legislative or regulatory reform of the FDA clearance and approval process may make it more difficult and costly for us to obtain regulatory approval of our product candidates and to manufacture, market and distribute our products after approval is obtained.

From time to time, legislation is drafted and introduced in Congress that could significantly change the statutory provisions governing the regulatory approval, manufacture and marketing of regulated products or the reimbursement thereof. In addition, FDA regulations and guidance are often revised or reinterpreted by the FDA in ways that may significantly affect our business and our products under development. Any new regulations or revisions or reinterpretations of existing regulations may impose additional costs or lengthen review times of future products. In addition, FDA regulations and guidance are often revised or reinterpreted by the agency in ways that may significantly affect our business and our products. It is impossible to predict whether legislative changes will be enacted or FDA regulations, guidance or interpretations changed, and what the impact of such changes, if any, may be.

For example, the FDA may change its clearance and approval policies, adopt additional regulations or revise existing regulations, or take other actions which may prevent or delay approval or clearance of our products under development or impact our ability to modify our currently cleared products on a timely basis. In 2011, the FDA initiated a review of the premarket clearance process in response to internal and external concerns regarding the 510(k) program, announcing 25 action items designed to make the process more rigorous and transparent. In addition, as part of the Food and Drug Administration Safety and Innovation Act of 2012, Congress enacted several reforms entitled the Medical Device Regulatory Improvements and additional miscellaneous provisions which will further affect medical device

19

Table of Contents

regulation both pre- and post-approval. The FDA has implemented, and continues to implement, these reforms, which could impose additional regulatory requirements upon us and delay our ability to obtain new 510(k) clearances, increase the costs of compliance or restrict our ability to maintain our current clearances. For example, the FDA recently issued guidance documents intended to explain the procedures and criteria the FDA will use in assessing whether a 510(k) submission meets a minimum threshold of acceptability and should be accepted for review. Under the “Refuse to Accept” guidance, the FDA conducts an early review against specific acceptance criteria to inform 510(k) submitters if the submission is administratively complete, or if not, to identify the missing element(s). Submitters are given the opportunity to provide the FDA with the identified information, but if the information is not provided within a defined time, the submission will not be accepted for FDA review. Any change in the laws or regulations that govern the clearance and approval processes relating to our current and future products could make it more difficult and costly to obtain clearance or approval for new products, or to produce, market and distribute existing products. Significant delays in receiving clearance or approval, or the failure to receive clearance or approval for our new products would have an adverse effect on our ability to expand our business.

Current legislation and future legislative or regulatory reform of the health care system may affect our ability to sell our products profitably.

In the United States, there have been, and we expect there to continue to be, a number of legislative and regulatory initiatives, at both the federal and state government levels, to change the healthcare system in ways that, if approved, could affect our ability to sell our products profitably. While many of the proposed policy changes require congressional approval to implement, we cannot be sure that reimbursement payments under governmental and private third-party payor programs to health care providers will remain at levels comparable to present levels or will be sufficient to cover the costs allocable to patients eligible for reimbursement under these programs. Any changes that lower reimbursement rates under Medicare, Medicaid or private payor programs could negatively affect our business.

Devices used in surgical procedures that are not classified as durable medical equipment, DME, are normally paid directly by the hospital or health care provider and not reimbursed separately by third-party payors. Healthcare providers are, however, reimbursed by third-party payors for the surgical procedures performed using non-DME devices. As a result, these types of devices are subject to intense price competition that can place a small manufacturer at a competitive disadvantage as hospitals and health care providers attempt to negotiate lower prices for products such as the ones we develop and sell. To the extent that any of our products are deemed to be durable medical equipment, they may be subject to distribution under Medicare’s Competitive Acquisition regulations, which could adversely affect the amount that we can seek from payors. Additionally, our business operations and activities may be directly, or indirectly, subject to various federal, state and local healthcare laws, including but not limited to, laws prohibiting kickbacks and false claims. Any changes in the health reimbursement system that lowers reimbursement for surgical procedures using our devices or changes in healthcare laws generally or the enforcement of such laws could materially affect our business.

Most significantly, in March 2010, President Obama signed into law both the Patient Protection and Affordable Care Act and the reconciliation law known as Health Care and

20

Table of Contents

Education Affordability Reconciliation Act. We refer to such laws in this prospectus as the “2010 Health Care Reform Legislation.” The constitutionality of the 2010 Health Care Reform Legislation was confirmed on June 28, 2012 by the Supreme Court of the United States. Specifically, the Supreme Court upheld the individual mandate included changes regarding the extension of medical benefits to those who currently lack insurance coverage. Thus, the 2010 Health Care Reform Legislation has changed, and will continue to change, the existing state of the health care system by expanding coverage through voluntary state Medicaid expansion, attracting previously uninsured persons through the new health care insurance exchanges and by modifying the methodology for reimbursing medical services, drugs and devices. These structural changes could entail modifications to the existing system of third-party payors and government programs, such as Medicare and Medicaid, or some combination of both, as well as other changes.

Beyond coverage and reimbursement changes, the 2010 Health Care Reform Legislation subjects manufacturers of medical devices to an excise tax of 2.3% on certain U.S. sales of medical devices beginning in January 2013. This excise tax will likely increase our expenses in the future.

Further, the 2010 Health Care Reform Legislation includes the Physician Payments Sunshine Act, which, in conjunction with its implementing regulations, requires manufacturers of certain drugs, biologics, and devices that are reimbursable by Medicare, Medicaid and the Children’s Health Insurance Program to report certain payments or “transfers of value” provided to physicians and teaching hospitals and to report ownership and investment interests held by physicians and their immediate family members during the preceding calendar year. The Centers for Medicare & Medicaid Services, known as CMS, issued its final rule implementing the Physician Payments Sunshine Act in February 2013, and required data collection commenced as of August 1, 2013. Manufacturers must report aggregated data for August through December of 2013 to CMS in the first quarter of 2014 and more detailed information regarding the specific payments and transfers of value in the second quarter of 2014. CMS will release the data on a public website by September 30, 2014. The Company has complied with its initial reporting obligations under the Physician Payments Sunshine Act and intends to continue to comply with such requirements. The failure to report appropriate data could subject us to significant financial penalties. Other countries and several states currently have similar laws and more may enact similar legislation.

Regulations under the 2010 Health Care Reform Legislation have been, and are expected to continue to be, drafted, released and finalized throughout the next several years. The full impact of the 2010 Health Care Reform Legislation, as well as laws and other reform measures that may be proposed and adopted in the future, remains uncertain, but may continue the downward pressure on medical device pricing, especially under the Medicare program, and may also increase our regulatory burdens and operating costs, which could have a material adverse effect on our business operations.

Finally, we are unable to predict what additional legislation or regulation, if any, relating to the health care industry or third-party coverage and reimbursement may be enacted in the future or what effect such legislation or regulation would have on our business. Any cost containment measures or other health care system reforms that are adopted could have a material and adverse effect on our ability to commercialize our existing and future products successfully.

21

Table of Contents

Even if we receive regulatory clearance or approval to market our products, the market may not be receptive to our products, which could undermine our financial viability.

Even if our products obtain regulatory clearance or approval, resulting products may not gain market acceptance among physicians, patients, health care payors and/or the medical community. To date, we have experienced minimal sales of the AMID stapler and SPIDER System and have not made any sales of the SurgiBot System or the Gastroplasty Device. We have decided to focus our efforts on the development of the SurgiBot System and substantially decreased our SPIDER System sales and stopped sales of the AMID stapler. We believe that the degree of market acceptance of a commercialized product will depend on a number of factors, including:

If applicable, for products such as the Gastroplasty Device, availability of coverage and reimbursement from government and other third-party payors can also impact the acceptance of our product offerings.

If our products fail to achieve market acceptance, we may not be able to generate significant revenue or achieve or sustain profitability.

There is significant uncertainty related to the third-party coverage and reimbursement of newly cleared or approved medical devices. Normally, surgical devices are not directly covered; instead, the procedure using the device is subject to a coverage determination by the insurer. We believe that hospitals and ambulatory surgery centers will be our direct customers for our product candidates, and that our revenue is not directly dependent upon the receipt of reimbursement codes or reimbursement coverage by payors. Thus, our customers’ ability to obtain coverage and adequate reimbursement for surgical procedures utilizing our products will affect demand for our current and future products. The commercial success of our existing and future products in both

22

Table of Contents

domestic and international markets also may depend in part on the availability of coverage and adequate reimbursement from third-party payors, including government payors, such as the Medicare and Medicaid programs, managed care organizations and other third-party payors. Government and other third-party payors are increasingly attempting to contain health care costs by limiting both coverage and the level of reimbursement for new products and, as a result, they may not cover or provide adequate payment for our existing and future products. These payors may conclude that our products are not as safe or effective as existing devices or that procedures using our devices are not as safe or effective as the existing procedures using other devices. These payors may also conclude that the overall cost of the procedure using one of our devices exceeds the overall cost of the competing procedure using another type of device, and third-party payors may not approve our products for coverage and adequate reimbursement. The failure to obtain coverage and adequate reimbursement for our existing and future products or our customers’ inability to obtain coverage and adequate reimbursement for surgical procedures using our products or health care cost containment initiatives that limit or restrict such reimbursement may reduce any future product revenue.

If we fail to attract and retain key management and scientific personnel, we may be unable to successfully develop or commercialize our products.

We will need to effectively manage our managerial, operational, financial, development, marketing and other resources in order to successfully pursue our research, development and commercialization efforts for our existing and future products. Our success depends on our continued ability to attract, retain and motivate highly qualified management and pre-clinical and clinical personnel. The loss of the services of any of our senior management, particularly Todd M. Pope, Richard M. Mueller and Joseph P. Slattery, could delay or prevent the development or commercialization of our products. We do not maintain “key man” insurance policies on the lives of these individuals or the lives of any of our other employees. We employ these individuals on an at-will basis and their employment can be terminated by us or them at any time, for any reason and with or without notice. We will need to hire additional personnel as we continue to expand our research and development activities and build a sales and marketing organization.

We may not be able to attract or retain qualified management and scientific personnel in the future due to the intense competition for qualified personnel among medical device and other businesses. If we are not able to attract and retain the necessary personnel to accomplish our business objectives, we may experience constraints that will impede significantly the achievement of our research and development objectives, our ability to raise additional capital and our ability to implement our business strategy. In particular, if we lose any members of our senior management team, we may not be able to find suitable replacements in a timely fashion or at all and our business may be harmed as a result.

We have not sought an advisory stockholder vote to approve the compensation of our named executive officers.

Rule 14a-21 under the Exchange Act requires us to seek a separate stockholder advisory vote at our annual meeting at which directors are elected to approve the compensation of our named executive officers, not less frequently than once every three years (say-on-pay vote), and,

23

Table of Contents

at least once every six years, to seek a separate stockholder advisory vote on the frequency with which we will submit advisory say-on-pay votes to our stockholders (say-on-frequency vote). In 2013, the year in which Rule 14a-21 became applicable to smaller reporting companies, we did not submit to our stockholders a say-on-pay vote to approve an advisory resolution regarding our compensation program for our named executive officers, or a say-on-frequency vote. Consequently, the Board of Directors has not considered the outcome of our say-on-pay vote results when determining future compensation policies and pay levels for our named executive officers. At our 2014 annual meeting of stockholders, we will be asking our stockholders to vote on a proposal to approve an advisory resolution regarding our compensation program for our named executive officers, and presenting a separate say-on-frequency vote. Following such annual meeting, the Board will consider the outcome of our say-on-pay vote results when determining future compensation policies and pay levels for our named executive officers, and will report on the results of the say-on-pay vote and the say-on-frequency vote as required by applicable SEC rules. In our Annual Report on Form 10-K, as amended, we disclosed that our disclosure controls and procedures did not lead to our identification of the requirement to provide these advisory say-on-pay and say-on-frequency votes, and we adjusted our disclosure controls and procedures processes accordingly.

Because our manufacturing capabilities are limited, we may rely on third parties to manufacture and supply some of our products. An inability to find additional or alternate sources for these products could materially and adversely affect our financial condition and results of operations.

In 2013 we operated manufacturing facilities for production of the SPIDER System and maintained manufacturing facilities for the AMID stapler product. In the future, we may choose to use a third-party manufacturer for our other products. In addition, certain of our SPIDER System product component parts come from third-party suppliers. If these manufacturing partners are unable to produce our products or component parts in the amounts that we require, we may not be able to establish a contract and obtain a sufficient alternative supply from another supplier on a timely basis and in the quantities we require.

Our products require precise, high quality manufacturing. We and our contract manufacturers will be subject to ongoing periodic unannounced inspection by the FDA and non-U.S. regulatory authorities to ensure strict compliance with the FDA’s Quality System Regulation, current “good manufacturing practices” and other applicable government regulations and corresponding standards. If we or our contract manufacturers fail to achieve and maintain high manufacturing standards in compliance with the FDA’s Quality System Regulation, we may experience manufacturing errors resulting in patient injury or death, product recalls or withdrawals, delays or interruptions of production or failures in product testing or delivery, delay or prevention of filing or approval of marketing applications for our products, cost overruns or other problems that could seriously harm our business.

Any performance failure by us or on the part of our contract manufacturers could delay product development or regulatory clearance or approval of our products, or commercialization of our products and future products, depriving us of potential product revenue and resulting in additional losses. In addition, our dependence on any third party for manufacturing could adversely affect our future profit margins. Our ability to replace any then-existing manufacturer

24

Table of Contents

may be difficult because the number of potential manufacturers is limited and, in the case of Class III devices, the FDA must approve any replacement manufacturer before manufacturing can begin. It may be difficult or impossible for us to identify and engage a replacement manufacturer on acceptable terms in a timely manner, or at all.

We may become subject to potential product liability claims, and we may be required to pay damages that exceed our insurance coverage.

Our business exposes us to potential product liability claims that are inherent in the design, testing, manufacture, sale and distribution of our products and each of our product candidates that we are seeking to introduce to the market. Surgical medical devices involve significant risks of serious complications, including bleeding, nerve injury, paralysis, infection, and even death. Any product liability claim brought against us, with or without merit, could result in the increase of our product liability insurance rates or in our inability to secure coverage in the future on commercially reasonable terms, if at all. In addition, if our product liability insurance proves to be inadequate to pay a damage award, we may have to pay the excess of this award out of our cash reserves, which could significantly harm our financial condition. If longer-term patient results and experience indicate that our products or any component of a product causes tissue damage, motor impairment or other adverse effects, we could be subject to significant liability. A product liability claim, even one without merit, could harm our reputation in the industry, lead to significant legal fees, and result in the diversion of management’s attention from managing our business.

We currently have a limited sales, marketing and distribution organization. If we are unable to develop our sales, marketing and distribution capability on our own or through collaborations with marketing partners, we will not be successful in commercializing our products.

We currently have limited marketing, sales and distribution capabilities, including a limited number of direct sales representatives. We intend to distribute our products through direct sales and independent contractor and distribution agreements with companies possessing established sales and marketing operations in the medical device industry, but there can be no assurance that we will be successful. To the extent that we enter into co-promotion or other arrangements, our product revenue is likely to be lower than if we directly market or sell our products. In addition, any revenue we receive will depend in whole or in part upon the efforts of such third parties, which may not be successful and are generally not within our control. If we are unable to enter into such arrangements on acceptable terms or at all, we may not be able to successfully commercialize our products. If we are not successful in commercializing our existing and future products, either on our own or through collaborations with one or more third parties, our future product revenue will suffer and we may incur significant additional losses.

25

Table of Contents

For our Gastroplasty Device, we rely on our license with Creighton University, and any loss of our rights under such license agreement, or failure to properly maintain or enforce the patent applications underlying such license agreement, could materially adversely affect our business prospects for the Gastroplasty Device.

The patents and patent applications in our patent portfolio related to the Gastroplasty Device are not owned by us, but are licensed from Creighton University. Presently, we rely on such licensed technology for our Gastroplasty Device and relied on it in developing the SMART Dilator and bite blocks products and may license additional technology from other third parties in the future. The Creighton license agreement gives us rights for the commercial exploitation of the patents resulting from the patent applications, subject to certain provisions of the license agreement. Failure to comply with these provisions could result in the loss of our rights under the Creighton license agreement. Our inability to rely on these patents and patent applications which are the basis of certain aspects of our Gastroplasty Device technology would have an adverse effect on our business.

Further, our success will depend in part on the ability of us, Creighton University and other third-party licensors to obtain, maintain and enforce patent protection for our licensed intellectual property and, in particular, those patents to which we have secured exclusive rights. We, Creighton University or other third-party licensors may not successfully prosecute the patent applications which are licensed to us, may fail to maintain these patents, and may determine not to pursue litigation against other companies that are infringing these patents, or may pursue such litigation less aggressively than necessary to obtain an acceptable outcome from any such litigation. Without protection for the intellectual property we have licensed, other companies might be able to offer substantially identical products for sale, which could materially adversely affect our competitive business position, business prospects and results of operations.

If we or our licensors are unable to obtain and enforce patent protection for our products, our business could be materially harmed.

Our success depends, in part, on our ability to protect proprietary methods and technologies that we develop or license under the patent and other intellectual property laws of the United States and other countries, so that we can prevent others from unlawfully using our inventions and proprietary information. However, we may not hold proprietary rights to some patents required for us to commercialize our proposed products. We have numerous patent applications that are in process. For example, with respect to the SPIDER System, the SurgiBot System and other medical devices that we have invented, we have three issued patents and we have filed over 30 patent applications in the United States and abroad. To our knowledge, one patent within the technology we have licensed has been patented in the U.S. Because certain U.S. patent applications are confidential until patents issue, such as applications filed prior to November 29, 2000, or applications filed after such date which will not be filed in foreign countries, third parties may have filed patent applications for technology covered by our pending patent applications without our being aware of those applications, and our patent applications may not have priority over those applications. For this and other reasons, we or our third-party collaborators may be unable to secure desired patent rights, thereby losing desired exclusivity. If licenses are not available to us on acceptable terms, we will not be able to market the affected products or conduct the desired activities, unless we challenge the validity, enforceability or infringement of the third-party patent or otherwise circumvent the third-party patent.

26

Table of Contents

Our strategy depends on our ability to promptly identify and seek patent protection for our discoveries. In addition, we will rely on third-party collaborators to file patent applications relating to proprietary technology that we develop jointly during certain collaborations. The process of obtaining patent protection is expensive and time-consuming. If we or our present or future collaborators fail to file and prosecute all necessary and desirable patent applications at a reasonable cost and in a timely manner, our business will be adversely affected. Despite our efforts and the efforts of our collaborators to protect our proprietary rights, unauthorized parties may be able to develop and use information that we regard as proprietary.

The issuance of a patent provides a presumption, but does not guarantee that it is valid. Any patents we have obtained, or obtain in the future, may be challenged or potentially circumvented. Moreover, the United States Patent and Trademark Office, or the USPTO, may commence interference proceedings involving our patents or patent applications. Any such challenge to our patents or patent applications would be costly, would require significant time and attention of our management and could have a material adverse effect on our business. In addition, future court decisions may introduce uncertainty in the enforceability or scope of any patent, including those owned by medical device companies.

Our pending patent applications may not result in issued patents. The patent position of medical device companies, including ours, is generally uncertain and involves complex legal and factual considerations. The standards that the USPTO and its foreign counterparts use to grant patents are not always applied predictably or uniformly and can change. There is also no uniform, worldwide policy regarding the subject matter and scope of claims granted or allowable in medical device patents. Accordingly, we do not know the degree of future protection for our proprietary rights or the breadth of claims that will be allowed in any patents issued to us or to others. The legal systems of certain countries do not favor the aggressive enforcement of patents, and the laws of foreign countries may not protect our rights to the same extent as the laws of the United States. Therefore, the enforceability or scope of our owned or licensed patents in the United States or in foreign countries cannot be predicted with certainty, and, as a result, any patents that we own or license may not provide sufficient protection against competitors. We may not be able to obtain or maintain patent protection for our pending patent applications, those we may file in the future, or those we may license from third parties, including Creighton University.

We cannot assure you that any patents that will issue, that may issue or that may be licensed to us will be enforceable or valid or will not expire prior to the commercialization of our products, thus allowing others to more effectively compete with us. Therefore, any patents that we own or license may not adequately protect our future products.

If we or our licensors are unable to protect the confidentiality of our proprietary information and know-how, the value of our technology and products could be adversely affected.

In addition to patent protection, we also rely on other proprietary rights, including protection of trade secrets, know-how and confidential and proprietary information. To maintain

27

Table of Contents

the confidentiality of trade secrets and proprietary information, we will seek to enter into confidentiality agreements with our employees, consultants and collaborators upon the commencement of their relationships with us. These agreements generally require that all confidential information developed by the individual or made known to the individual by us during the course of the individual’s relationship with us be kept confidential and not disclosed to third parties. Our agreements with employees also generally provide and will generally provide that any inventions conceived by the individual in the course of rendering services to us shall be our exclusive property. However, we may not obtain these agreements in all circumstances, and individuals with whom we have these agreements may not comply with their terms. In the event of unauthorized use or disclosure of our trade secrets or proprietary information, these agreements, even if obtained, may not provide meaningful protection, particularly for our trade secrets or other confidential information. To the extent that our employees, consultants or contractors use technology or know-how owned by third parties in their work for us, disputes may arise between us and those third parties as to the rights in related inventions. Adequate remedies may not exist in the event of unauthorized use or disclosure of our confidential information. The disclosure of our trade secrets would impair our competitive position and may materially harm our business, financial condition and results of operations.

Our commercial success depends significantly on our ability to operate without infringing the patents and other proprietary rights of third parties.

Other entities may have or obtain patents or proprietary rights that could limit our ability to manufacture, use, sell, offer for sale or import products or impair our competitive position. In addition, to the extent that a third party patents or develops new technology that covers our products, we may be required to obtain licenses to that technology, which licenses may not be available or may not be available on commercially reasonable terms, if at all. If licenses are not available to us on acceptable terms, we will not be able to market the affected products or conduct the desired activities, unless we challenge the validity, enforceability or infringement of the third-party patent or circumvent the third-party patent, which would be costly and would require significant time and attention of our management. Third parties may have or obtain valid and enforceable patents or proprietary rights that could block us from developing products using our technology. Our failure to obtain a license to any technology that we require may materially harm our business, financial condition and results of operations.

If we become involved in patent litigation or other proceedings related to a determination of rights, we could incur substantial costs and expenses, substantial liability for damages or be required to stop our product development and commercialization efforts, any of which could materially adversely affect our liquidity, business prospects and results of operations.

Third parties may sue us for infringing their patent rights. Likewise, we may need to resort to litigation to enforce a patent issued or licensed to us or to determine the scope and validity of proprietary rights of others. In addition, a third party may claim that we have improperly obtained or used its confidential or proprietary information. Furthermore, in connection with our third-party license agreements, we generally have agreed to indemnify the licensor for costs incurred in connection with litigation relating to intellectual property rights. The cost to us of any litigation or other proceeding relating to intellectual property rights, even if resolved in our favor, could be substantial, and the litigation would divert our management’s

28

Table of Contents

efforts. Some of our competitors may be able to sustain the costs of complex patent litigation more effectively than we can because they have substantially greater resources. Uncertainties resulting from the initiation and continuation of any litigation could limit our ability to continue our operations.

If any parties successfully claim that our creation or use of proprietary technologies infringes upon their intellectual property rights, we might be forced to pay damages, potentially including treble damages, if we are found to have willfully infringed on such parties’ patent rights. In addition to any damages we might have to pay, a court could require us to stop the infringing activity or obtain a license. Any license required under any patent may not be made available on commercially acceptable terms, if at all. In addition, such licenses are likely to be non-exclusive and, therefore, our competitors may have access to the same technology licensed to us. If we fail to obtain a required license and are unable to design around a patent, we may be unable to effectively market some of our technology and products, which could limit our ability to generate revenues or achieve profitability and possibly prevent us from generating revenue sufficient to sustain our operations.

Our business may become subject to economic, political, regulatory and other risks associated with domestic and international operations.

Our business is subject to risks associated with conducting business domestically and internationally, in part due to some of our suppliers being located outside the U.S. Accordingly, our future results could be harmed by a variety of factors, including:

We may be required to recognize impairment charges for our goodwill and other intangible assets.

As of December 31, 2013, the net carrying value of our goodwill and other intangible assets totaled approximately $96.6 million, which represents approximately 82.8% of our total assets. In accordance with generally accepted accounting principles, we periodically assess these assets to determine if they are impaired. Significant negative industry or economic trends, disruptions to our business, inability to effectively integrate acquired businesses, unexpected

29

Table of Contents

significant changes or planned changes in use of the assets, divestitures and market capitalization declines may impair our goodwill and other intangible assets. Any charges relating to such impairments would adversely affect our results of operations in the periods recognized.

In connection with the September 2013 merger transaction, we entered into lock-up and voting agreements with certain of our stockholders pursuant to which such stockholders agreed not to transfer their shares for designated periods and to vote to approve certain corporate actions following the merger.

In connection with the merger and the private placement financing described in this prospectus, each of the investors participating in the private placement, the largest stockholders of each of SafeStitch and TransEnterix Surgical prior to the merger (many of whom were investors in the private placement), and members of our Board of Directors, agreed to enter into a lock-up and voting agreement, pursuant to which such persons agreed not to sell, transfer or otherwise convey any of the Company’s securities held by them for designated periods following the merger closing date. The total number of our shares subject to the lock-up and voting agreements at the time of the merger was 226,835,825 shares, comprising approximately 93% of our stock on the effective date of the merger. The lock-up and voting agreements provide that such persons may sell, transfer or convey: (1) up to 50% of the locked-up shares (113,417,913 shares) after September 3, 2014 (the one-year anniversary of the merger closing date); (2) an additional 56,708,956 shares after March 3, 2015 (the eighteen-month anniversary of the merger closing date); and (3) the remaining 56,708,956 shares on September 3, 2015 (the two-year anniversary of the merger closing date). The restrictions on transfer contained in the lock-up and voting agreements cease to apply to all of the locked-up shares following the second anniversary of the merger closing date. These limitations may add to the low volume of shares of our common stock that trade on the OTCBB during the time periods described.

Any waiver of the lock-up restrictions under a lock-up and voting agreement requires the consent of the Company and all of the investors party to the lock-up and voting agreements.

Additionally, pursuant to the lock-up and voting agreements, each investor who signed an agreement agreed, for the period commencing on the merger closing date and ending on September 3, 2014, to vote all of such investor’s shares in favor of: (i) amending our Amended and Restated Certificate of Incorporation to change our name to “TransEnterix, Inc.”; (ii) effecting a reverse stock split of the common stock on terms approved by our Board of Directors; and (iii) amending our 2007 Incentive Compensation Plan in order to increase the number of shares of common stock available for issuance. The corporate actions described in (i) and (iii) above were approved by a majority of stockholders and effected on December 6, 2013. The corporate action described in (ii) above was approved by a majority of our stockholders on February 12, 2014. Therefore, all voting requirements under the lock-up and voting agreements have been completed as of the date of this prospectus.

30

Table of Contents

Risks Related to Offerings under this Prospectus and our Common Stock

The market price of our common stock has been, and may continue to be, highly volatile, and such volatility could cause the market price of our common stock to decrease and could cause you to lose some or all of your investment in our common stock.

During the two years ended December 31, 2013, the market price of our common stock fluctuated from a high of $1.78 per share to a low of $0.21 per share, and our stock price continues to fluctuate. The market price of our common stock may continue to fluctuate significantly in response to numerous factors, some of which are beyond our control, such as:

Further, the stock market in general, and the market for medical device companies in particular, has recently experienced extreme price and volume fluctuations. The volatility of our common stock is further exacerbated due to its low trading volume. Continued market fluctuations could result in extreme volatility in the price of our common stock, which could cause a decline in the value of our common stock and the loss of some or all of your investment.

Our Board of Directors has the authority, under Delaware law, to approve the issuance of additional shares of our common stock, or shares of our preferred stock, that are authorized for issuance but not yet issued, without the need for stockholder approval. As of March 28, 2014, there were 750,000,000 shares of common stock authorized for issuance and 25,000,000 shares of preferred stock authorized for issuance, and 244,276,923 shares of common stock and zero shares of preferred stock outstanding. Any approval by our Board of Directors of the issuance of additional shares of common stock or preferred stock is likely to have an immediate and

31

Table of Contents

substantial dilutive effect on the percentage ownership of the holders of our outstanding shares. As described below, we have filed an application to list our common stock on the NYSE MKT. If such listing occurs, we will be subject to the listing rules of the NYSE MKT, which include stockholder approval requirements for issuances of common stock exceeding 20% of the then-outstanding shares of common stock in transactions other than public offerings. However, until such listing occurs, such stockholder approval requirement is not applicable to us.

We are in the process of effecting a reverse stock split of our common stock, which could result in increased volatility in the price and trading volume of our common stock and cause a decline in the value of our common stock.

On February 12, 2014, the holders of approximately 66% of our voting securities authorized a Certificate of Amendment to our Amended and Restated Certificate of Incorporation to effect a reverse stock split in the range of one-for-two to one-for-ten, with the actual ratio to be determined within such range by the Board of Directors in its sole discretion. Subsequently, the Board of Directors approved a one-for-five reverse stock split of our common stock. On March 31, 2014, we filed the Certificate of Amendment to our Certificate of Incorporation to begin the process to effect the reverse stock split.

The reverse stock split was contemplated in connection with our application to list our common stock for trading on the NYSE MKT to assist in meeting the NYSE MKT minimum bid price requirement of a stock price of at least $2.00 per share. We believe the one-for-five reverse stock split will allow us to achieve and maintain a stock price above the minimum bid requirements, but we cannot provide assurance that such stock price will be maintained. We submitted an application to have our common stock listed for trading on the NYSE MKT on March 17, 2014. Our proposed listing on the NYSE MKT is dependent upon meeting all relevant quantitative and qualitative listing criteria of the NYSE MKT. We anticipate approval of our listing application with the NYSE MKT subject to completion of a public offering under this Registration Statement, and other relevant requirements, including the finalization of the reverse stock split. Although we believe our common stock will be accepted for listing on the NYSE MKT, we cannot assure you that the NYSE MKT will ultimately approve our application for listing or that we will be able to sustain such listing.

The reverse stock split will not result in any change in a stockholder’s economic interest in the Company, but stockholders may not view the reverse stock split in a favorable manner. If the reverse stock split is not viewed favorably by stockholders, this could result in increased volatility in the price and trading volume of our common stock, which could also cause a decline in the value of our common stock. There can be no assurance that the per share market price of our common stock following the reverse stock split will increase and be maintained in proportion to the reduction in the number of shares of our common stock outstanding before the reverse stock split.

While the Board of Directors believes that a higher stock price per share, and a lower number of outstanding shares may help generate investor interest, there can be no assurance that the reverse stock split will result in a per-share price that will attract institutional investors or

32

Table of Contents

investment funds or that such share price will satisfy the investing guidelines of institutional investors or investment funds. As a result, the trading liquidity of our common stock may not necessarily improve.

Trading of our common stock is limited, and trading restrictions imposed on us by applicable regulations may further reduce trading in our common stock, making it difficult for our stockholders to sell their shares; and future sales of common stock could reduce our stock price.

Trading of our common stock is currently conducted on the OTC Bulletin Board, or OTCBB. The liquidity of our common stock is limited, not only in terms of the number of shares that can be bought and sold at a given price, but also as it may be adversely affected by delays in the timing of transactions and reduction in security analysts’ and the media’s coverage of us, if at all. As described above, the holders of approximately 93% of our outstanding stock at the time of the merger agreed to lock-up restrictions on such shares until at least September 3, 2014. In addition, as of the date of this prospectus approximately 65% of the issued and outstanding shares of our common stock are held by officers, directors and beneficial owners of at least 10% of our outstanding shares. These holders are subject to certain restrictions, including transfer restrictions set forth in the lock-up and voting agreements, and restrictions imposed by the Securities Act with regard to trading our common stock. These factors may result in different prices for our common stock than might otherwise be obtained in a more liquid market and could also result in a larger spread between the bid and asked prices for our common stock. In addition, without a large public float, our common stock is less liquid than the stock of companies with broader public ownership, and, as a result, the trading prices of our common stock may be more volatile. In the absence of an active public trading market, an investor may be unable to liquidate his investment in our common stock. Trading of a relatively small volume of our common stock may have a greater impact on the trading price of our stock than would be the case if our public float were larger. We cannot predict the prices at which our common stock will trade in the future, if at all.

Sales by stockholders of substantial amounts of our shares of common stock, the issuance of new shares of common stock by us or the perception that these sales may occur in the future could materially and adversely affect the market price of our common stock, and you may lose all or a portion of your investment in our common stock.

Because our common stock may be a “penny stock,” it may be more difficult for investors to sell shares of our common stock, and the market price of our common stock may be adversely affected.

Our common stock may be a “penny stock” if, among other things, the stock price is below $5.00 per share, it is not listed on a national securities exchange or approved for quotation on the Nasdaq Stock Market or any other national stock exchange or it has not met certain net tangible asset or average revenue requirements. Broker-dealers who sell penny stocks must provide purchasers of these stocks with a standardized risk-disclosure document prepared by the SEC. This risk-disclosure document provides information about penny stocks and the nature and level of risks involved in investing in the penny-stock market. A broker must also give a purchaser, orally or in writing, bid and offer quotations and information regarding broker and

33

Table of Contents

salesperson compensation, make a written determination that the penny stock is a suitable investment for the purchaser and obtain the purchaser’s written agreement to the purchase. Broker-dealers must also provide customers that hold penny stock in their accounts with such broker-dealer a monthly statement containing price and market information relating to the penny stock. If a penny stock is sold to an investor in violation of the penny stock rules, the investor may be able to cancel its purchase and get its money back.

If applicable, the penny stock rules may make it difficult for investors to sell their shares of our common stock. Because of the rules and restrictions applicable to a penny stock, there is less trading in penny stocks and the market price of our common stock may be adversely affected. Also, many brokers choose not to participate in penny stock transactions. Accordingly, investors may not always be able to resell their shares of our common stock publicly at times and prices that they feel are appropriate.

Directors, executive officers, principal stockholders and affiliated entities own a significant percentage of our capital stock, and they may make decisions that you do not consider to be in the best interests of our stockholders.

As of the date of this prospectus, our directors, executive officers, principal stockholders and affiliated entities beneficially own, in the aggregate, approximately 65% of our outstanding common stock. As a result, if some or all of them acted together, they would have the ability to exert substantial influence over the election of our Board of Directors and the outcome of issues requiring approval by our stockholders. This concentration of ownership may also have the effect of delaying or preventing a change in control of the Company that may be favored by other stockholders. This could prevent transactions in which stockholders might otherwise recover a premium for their shares over current market prices.

Our management will have broad discretion as to the use of the proceeds of offerings under this prospectus.

We have not designated the amount of net proceeds we will receive from an offering under this prospectus for any particular purpose. Accordingly, our management will have broad discretion as to the application of net proceeds. Our stockholders may not agree with the manner in which our management chooses to allocate and spend the net proceeds.

We may issue preferred stock in the future, and the terms of the preferred stock may reduce the value of our common stock.

We are authorized to issue shares of preferred stock in one or more series. Our Board of Directors may determine the terms of future preferred stock offerings without further action by our stockholders. If we issue preferred stock, it could affect your rights or reduce the value of our outstanding common stock. In particular, specific rights granted to future holders of preferred stock may include voting rights, preferences as to dividends and liquidation, conversion and redemption rights, sinking fund provisions, and restrictions on our ability to merge with or sell our assets to a third party.

34

Table of Contents

We do not expect to pay any cash dividends on our common stock.

We have not declared or paid any cash dividends on our common stock or other securities, and we currently do not anticipate paying any cash dividends in the foreseeable future. Because we do not anticipate paying cash dividends for the foreseeable future, our stockholders will not realize a return on their investment in our common stock except to the extent of any appreciation in the value of our common stock. Our common stock may not appreciate in value, or may decline in value.