PART I
Overview
Amerityre incorporated as a Nevada corporation on January 30, 1995 under the name American Tire Corporation and changed its name to Amerityre Corporation in December 1999.
Amerityre engages in the research and development, manufacturing and sale of polyurethane tires. We believe that we have developed unique polyurethane formulations that allow us to make products with superior performance characteristics, including abrasion resistance, energy efficiency and load-bearing capabilities, than conventional rubber tires. We also believe that our manufacturing processes are more energy efficient than traditional rubber tire manufacturing processes, in part because our polyurethane compounds do not require the multiple processing steps, extreme heat, and high pressure that are necessary to cure rubber. Using our polyurethane technologies, we believe tires can be produced which last longer, are less susceptible to failure and offer improved fuel economy.
Products
Our polyurethane material technology is based on two proprietary formulations; closed-cell polyurethane foam, which is a lightweight material with high load-bearing capabilities for low duty cycle applications; and Elastothane®, a high performance polyurethane elastomer with high load-bearing capabilities for high duty
applications.
We are concentrating on three segments of the tire market: closed-cell polyurethane foam tires, polyurethane elastomer forklift tires and agricultural tires.
Closed-Cell Polyurethane Foam Tires
We currently manufacture several lines of closed-cell polyurethane foam tires for bicycles,
hand trucks, lawn and garden, wheelbarrow, and medical mobility products. Our closed-cell polyurethane foam products are often referred to as flat-free because they have no inner tube, do not require inflation and will not go flat even if punctured. Our closed-cell polyurethane foam tires are mounted on the wheel rim in much the same way as a pneumatic tire. Our closed-cell polyurethane foam products are virtually maintenance free, eliminating the need to make tedious puncture repairs; provide extended tire life; and offer superior energy efficiency compared to rubber based tires. Foam tires and components accounted for 90.7% of fiscal 2013 revenues.
Polyurethane Elastomer Forklift Tires
We have developed solid polyurethane forklift tires made of Elastothane®. We currently produce and sell over 20 sizes for Class 1, 4 and 5 forklifts. We believe our tires are superior to rubber tires as they are non-marking, more energy efficient, carry greater load weight, operate in lower temperature environments and have longer service lives. Forklift tires accounted for 6.3% of fiscal 2013 revenues.
Amerityre has developed two products for the agricultural tire market, one used in irrigation and one used in planting. Both products have successfully field tested and we are developing sales and marketing strategies and manufacturing plans for these products. Agricultural tires accounted for 3.0% of fiscal 2013 revenues.
Raw Materials and Supplies
The two principal chemical raw materials required to manufacture our products are known generically as polyols and isocyanates. We purchase our chemical raw materials from multiple suppliers. In addition, we purchase various quantities of additional chemical additives that are mixed with the polyols and isocyanates. These additional chemicals are also available from multiple suppliers. Critical raw materials are generally sourced from at least two vendors to assure adequate supply and price competition.
In addition to the chemical raw materials, we purchase steel and plastic wheel components for use in tire and wheel assemblies. We purchase these components from multiple third-party suppliers.
Operations/Manufacturing
Our closed-cell polyurethane foam products are primarily manufactured utilizing multiple stationed carousel centrifugal molding presses. We produce closed-cell foam products using these presses by pouring a proprietary polyurethane formula into a mold, which then spreads out in the mold through centrifugal force. The molding process occurs by reacting monomeric diphenylmethanediisocyanate (MDI) with polyol and other chemicals. The chemical reaction causes a cross linking of the chemicals, which thereafter become solid. The manufacturing process for a closed-cell polyurethane foam product takes less than two minutes. The closed-cell polyurethane foam product can then be removed from the mold and the process is repeated.
All of our products are inspected following the manufacturing process and prior to shipment to ensure quality. Any closed-cell foam products considered by our quality control personnel to be defective are disposed of through traditional refuse collection services or are ground into pellets, which can be melted and reused to make other products and reduce waste of raw materials.
Information Systems
We use commercial computer aided design (CAD) software in connection with engineering and designing our products. This software allows us to integrate our proprietary manufacturing and production data with our design technology, enabling our engineering department to leverage our previous manufacturing and test results to predict the performance characteristics of new product designs and product improvements. For general business purposes, we use commercially available software for financial, distribution, manufacturing, customer relationships and payroll management.
Sales, Marketing and Distribution
We have one full-time sales person and three independent sales representatives actively targeting customers that utilize tires in significant volume. Senior Management is also working to establish broader distribution for our products by contacting major regional distributors, retail cooperatives and chains that distribute and otherwise sell our products. We currently distribute directly from our manufacturing facility in Boulder City, Nevada and from an independent, contracted warehouse in Ravenna, Ohio.
Internationally, we have a distribution agreement established in Canada and a manufacturing licensing agreement established in Asia. In addition, we have developed distribution partners in Sweden and Germany. We continue to seek additional international sales and marketing partners to expand the worldwide sales and distribution of our products.
Customers
We have two customers who accounted for 22% and 33% of our sales for the years ended June 30, 2013 and 2012, respectively. In general, our customers are comprised of OEMs of lawn and garden products, and outdoor power equipment, regional distributors, retail cooperatives and chains that sell lawn and garden products, bicycle tires and hand truck tires to the aftermarket.
Competition
There are several companies that produce not-for-highway-use or light-use tires from polyurethane foam such as Greentyre, manufactures in the UK; Carefree Tire manufactures in China; Marathon Tire manufactures in China; Custom Engineered Wheels and Krypton Industries manufacture in India. We believe our closed-cell polyurethane foam tires differ from the polyurethane foam tires offered by the aforementioned competitors because our products contain millions of closed-cell versus open-cell air bubbles. By closing the cells, our products have higher load bearing characteristics than tire products with open-cell polyurethane foam, while effectively producing a ride quality comparable to a pneumatic tire.
In addition to manufacturers of polyurethane foam tires, we compete directly with companies that manufacture and market traditional not-for-highway-use, low-duty pneumatic, semi-pneumatic, and solid tires made from rubber. The not-for-highway use tire industry has historically been highly competitive and several of our competitors have financial resources that substantially exceed ours. In addition, many of our competitors are very large companies, such as Kenda, Taiwan; Maxxis International, Taiwan; Cheng Shin, China; and Carlisle Tire, USA; that have established brand name recognition, have established distribution networks for their products, and have developed consumer loyalty to such products.
Intellectual Property Rights
We seek to obtain patent protection for, or to maintain as trade secrets, those inventions that we consider important to the development of our business. We rely on a combination of patent, trademark, copyright and trade secret laws in the United States and other jurisdictions as well as confidentiality procedures and contractual provisions to protect our proprietary technology and branding. We control access to our proprietary technology and enter into confidentiality agreements with our employees and other third parties. We own twelve issued U.S. patents and have additional pending U.S. and foreign patent applications. We use various trademarks in association with marketing our products, including the names Amerityre®, Elastothane®, Arcus®, Amerifill®, Kik® and Kryon®.
Trade Secrets
Our polyurethane material technology is based on two key proprietary formulations, a closed-cell polyurethane foam, which is a lightweight material with high load-bearing capabilities for low duty cycle applications, and a polyurethane elastomer, which is a high performing material with high load-bearing capabilities for high duty applications. We are in compliance with the governing regulations that provide our formulations protection under U.S. Trade Secret law.
Patents
Set forth in the schedule below are patents that have been issued or for which a patent application is pending with respect to our technology.
Description of Patent
|
|
U.S. Patent App/Serial No.
|
|
Issued Date or Date Filed
|
|
Brief Description/Purpose
|
Improved Method and Apparatus for Making Tires and the Like
|
|
|
|
|
|
Applies to pouring the material at the inside diameter (where the tire starts) during the manufacturing process
|
Run-Flat Tire with Elastomeric Inner Support
|
|
|
|
|
|
Applies to a polyurethane insert within a tire to create a “run-flat” system
|
Method and Apparatus for Vacuum Forming a Wheel from a Urethane Material
|
|
|
|
|
|
Applies to the method we employ to coat a light gauge steel or aluminum wheel by evacuating air from the mold while moving material through the mold utilizing a vacuum process to eliminate pockets of air within the matrix of the material. The resulting product becomes a “Composite” wheel.
|
Elastomeric Tire with Arch Shaped Shoulders
|
|
|
|
|
|
Applies the design of the Arcus® run-flat tire (the first polyurethane elastomer tire to run with or without air)
|
Method for Manufacturing a Tire with Belts, Plies and Beads Using a Pre-cured Elastomer and Cold Rolling Method
|
|
|
|
|
|
Applies to how we put the plies, beads and belts on a mandrel or bladder to be placed inside a mold for manufacturing a tire
|
Plies Sleeve for Use in Forming an Elastomeric Tire
|
|
|
|
|
|
Applies to the how the tire beads and tire plies are assembled prior to putting them on a mandrel or a core/bladder
|
Improved Vacuum Forming Apparatus for Vacuum Forming a Tire, Wheel or Other Item from an Elastomeric Material
|
|
|
|
|
|
Applies to an improvement in the vacuum forming equipment used to manufacture a tire and other items
|
Method and Apparatus for Vacuum Forming a Wheel from a Urethane Material
|
|
|
|
|
|
Applies to the method we employ to coat a light gauge steel or aluminum wheel by evacuating air from the mold while moving material through the mold utilizing a vacuum process to eliminate pockets of air within the matrix of the material. The resulting product becomes a “Composite” wheel.
|
Method for Vacuum Forming an Elastomeric Tire
|
|
|
|
|
|
Applies to polyurethane tires and methods we employ to evacuate air from mold while moving material through the mold.
|
Run Flat Tire Insert System
|
|
|
|
|
|
Applies to how to utilize an insert on a wheel within a corresponding pneumatic tire
|
Method and Apparatus for Vacuum Forming an Elastomeric Tire
|
|
|
|
|
|
Applies to polyurethane tires and the method we employ to evacuate air from the mold while moving material through the mold utilizing a vacuum process to eliminate air pockets within the matrix of the material
|
Method for Filling a Tire and Wheel with a Closed-Cell Foam
|
|
|
|
|
|
Applies to how filling a tire and wheel assembly cavity with flexible closed-cell polyurethane foam
|
System for Retreading a Transport Tire with Polyurethane Tread
|
|
|
|
|
|
Applies to apparatus we used to retread transport tires with polyurethane tread.
|
Process for Forming an Airless Spare Tire
|
|
|
|
|
|
Applies to the process we employ to manufacture an automobile spare tire from polyurethane.
|
Method for Retreading a Heavy Duty Tire with a Polyurethane Tread
|
|
|
|
|
|
Applies to the method we employ for applying a polyurethane tread to a rubber tire casing.
|
Trademarks
Set forth in the schedule below are the United States trademarks that have been registered.
Trademarks
|
|
Registration/Serial #
|
|
Issued/Filed
|
|
|
2,401,989
|
|
|
|
|
3,139,489
|
|
|
|
|
2,908,077
|
|
|
|
|
85/686,835
|
|
|
|
|
3,440,176
|
|
|
|
|
3,608,633
|
|
|
|
|
4,009,423
|
|
|
We also own certain trademark applications and/or trademark registrations relating to the Arcus
®
trademark in several foreign jurisdictions.
Employees
As of August 31, 2013, we had 20 full-time employees and 1 part-time employee, including 5 salaried and 16 hourly employees. We may hire temporary labor for manufacturing needs as required. We believe that we will be able to hire a sufficient quantity of qualified laborers in the local area to meet our employment needs. Our manufacturing process does not require special training, other than orientation to our production techniques and specific equipment. None of our employees is represented by a labor union or a collective bargaining agreement. We consider our relations with our employees to be good.
Research and Development
Our current research and development activities are focused primarily on product improvement (i.e., forklift tires and agriculture tires) and cost efficient manufacturing processes. We have also introduced a “low cost” polyurethane foam formulation increasing the Company’s competitive position. Due to the Company’s limited resources, tire projects which are contingent on additional development, such as composite and automotive tires, have been put on hold and will be revisited at a later date. Research and development expenses were $1,395 and $10,032, for fiscal 2013 and 2012, respectively.
Due to our history of operating losses, our auditors are uncertain that we will be able to continue as a going concern.
Our financial statements have been prepared assuming that we will continue as a going concern. For the years ended June 30, 2013 and 2012, we had net losses of approximately $1,134,625 and $1,175,019 respectively. The independent auditors’ report issued in conjunction with the financial statements for the year ended June 30, 2013 contains an explanatory paragraph indicating that the foregoing matters raise substantial doubt about our ability to continue as a going concern. We cannot guarantee that we can generate net income, increase revenues or successfully expand our operation in the future, and if we cannot do so, the company may not be sustainable and any investment in the company may be lost.
Because our auditors have expressed a going concern opinion, our ability to obtain additional financing could be adversely affected.
We have incurred significant losses since inception, which have resulted in an accumulated deficit of $59,196,728 at June 30, 2013. Because of these continued losses and our accumulated deficit, we have included a going concern paragraph in Note 5 to our financial statements included in this report, addressing substantial doubt about our ability to continue as a going concern. This going concern paragraph could adversely affect our ability to obtain favorable financing terms in the future or to obtain any additional financing if needed.
Historically, we have lost money from operations and we have made no provision for any contingency, unexpected expenses or increases in costs that may arise.
Since inception, we have been able to cover our operating losses from the sale of our securities. We do not know if these sources of funds will be available to cover future operating losses. If we are unable to obtain adequate sources of funds to operate our business we may not be able to continue as a going concern.
Our business operations and plans could be adversely affected in the event we need additional financing and are unable to obtain such funding when needed. To the extent that our business strategy requires expanding our operations, such expansion could be costly to implement and may cause us to experience significant continuing losses. It is possible that our available short-term assets and anticipated revenues may not be sufficient to meet our operating expenses, business expansion plans, and capital expenditures for the next twelve months. Insufficient funds may prevent us from implementing our business strategy or may require us to delay, scale back or eliminate certain opportunities for the commercialization of our technology and products. If we cannot generate adequate sales of our products, or increase our revenues through licensing of our technology or other means, then we may be forced to cease operations.
In order to succeed as a company, we must continue to manufacture quality products and sell adequate quantities of products at prices sufficient to generate profits. We may not accomplish these objectives. A number of factors may affect future sales of our products even if we are successful in increasing our revenue base. These factors include whether competitors produce alternative or superior products and whether the cost of implementing our products is competitive in the marketplace.
In addition, we are attempting to increase revenues through licensing our technology and manufacturing rights, and selling polyurethane chemical systems to customers that produce their own products. If these proposals are not viable in the marketplace, we may not generate significant revenues from these efforts.
If the holder of the secured convertible promissory note does not choose to convert the note to shares of our common stock, we may have difficulty obtaining the necessary funds to pay principal and interest in cash when due
.
During the year ended June 30, 2011, we closed a private placement of secured convertible promissory notes (the “Notes”). We sold an aggregate of $755,800 in Notes. The Notes were for a term of one year with simple interest of 6 percent. The Notes are convertible at the holders’ option to our common stock at a conversion rate of $0.35 per share. As an incentive to convert, if a holder elects such conversion, for each two shares in the conversion, the holder shall also receive one warrant to purchase an additional share, exercisable at $0.60 per share for an exercise period of 2 years from the date of conversion. At this filing date, the remaining Note holder has extended their maturity until March 31, 2014. If the outstanding note holder demands cash repayment, it could severely impact our cash flow, limit our ability to make necessary capital improvements and prevent us from completing our business plans or expanding our production capability.
The “slow growth” in the U.S. economy could have an adverse impact on our business, operating results or financial position.
The U.S. economy has experienced “slow growth” since the last U.S. recession and general downturn in the global economy. A continuation or worsening of these conditions, including credit and capital markets disruptions, could have an adverse impact on our business, operating results or financial position in a number of ways. We may experience declines in revenues and cash flows as a result of reduced orders, payment delays or other factors caused by the economic problems of our customers and prospective customers. We may experience supply chain delays, disruptions or other problems associated with financial constraints faced by our suppliers and customers. We may incur increased costs or experience difficulty with about ability to borrow in the future or otherwise with financing our operating, investing or financing activities. Any of these potential problems could hinder our efforts to increase our sales and might, if severe and extensive enough, cause our sales to decline, jeopardizing our ability to operate.
We may experience delays in resolving unexpected technical issues experienced in completing development of new technology that will increase development costs and postpone anticipated sales and revenues.
As we develop and improve our products, we frequently must solve chemical, manufacturing and/or equipment-related issues. Some of these issues are ones that we cannot anticipate because the products we are developing are new. If we must revise existing manufacturing processes or order specialized equipment to address a particular issue, we may not meet our projected timetable for bringing products to market. Such delays may interfere with existing manufacturing schedules, negatively affect revenues and increase our cost of operations.
Because we have limited experience, we may be unable to successfully manage planned growth
We have limited experience in the commercial manufacturing and marketing arena, limited product sales and marketing experience, and limited staff and support systems, especially compared to competitors in the tire industry. In order to become profitable through the commercialization of our technology and products, our products must be cost-effective, economical to produce, have the ability to be distributed on a commercial scale. Furthermore, if our technologies and products do not achieve, or if they are unable to maintain, market acceptance or regulatory approval, we may not be profitable.
Our success depends, in part, on our ability to license, market and distribute our technologies and products effectively. We have limited manufacturing, marketing and distribution capabilities. We may not properly ascertain or assess any and all risks inherent in the industry. We may not be successful in entering into new licensing or marketing arrangements, engaging independent distributors, or recruiting, training and retaining a larger internal marketing staff and sales force. If we are unable to meet the challenges posed by our planned licensing, manufacturing, distribution and sales growth, our business may fail.
We are subject to governmental regulations, including environmental and health and safety regulations.
Our business operations are subject to a variety of national, state and local laws and regulations, many of which deal with the environment and health and safety issues. We believe we are in material compliance with applicable environmental and worker health and safety requirements. However, material future expenditures may be necessary if compliance standards change or material unknown conditions that require remediation are discovered. If we fail to comply with present and future environmental and worker health and safety laws and regulations, we could be subject to future liabilities or interruptions in our operations, which could have a material adverse effect on our business.
The markets in which we sell our products are highly competitive.
The markets for our products are highly competitive on a global basis, with a number of companies having significantly greater resources and market share than us. Many of our competitors maintain a significantly higher level of brand recognition than we do. Their access to greater resources enables them to adapt more quickly to changes in the markets we have targeted. Our competitors are able to devote greater resources to the development and sale of new products. Most of the products we have developed have not obtained broad market acceptance and rely on our emerging technology. To improve our competitive position, we will need to make significant ongoing investments in manufacturing, customer service and support, marketing, sales, research and development and intellectual property protection. We do not know if we will have sufficient resources to continue to make such investments or if we will maintain or improve our competitive position within the markets we serve.
We attempt to protect the critical elements of our proprietary technology as trade secrets. Because of our reliance on trade secrets, we are unable to prevent third parties from independently developing technologies that are similar or superior to our technology or from successfully reverse engineering or otherwise replicating our technology.
In certain cases, where the disclosure of information required to obtain a patent would divulge critical proprietary data, we may choose not to patent elements of our proprietary technology and processes which we have developed or may develop in the future and instead rely on trade secret laws to protect certain elements of our proprietary technology and processes. For example, we rely on trade secrets to protect our key polyurethane formulations. These formulations are critical elements of and central to our proprietary technology. Our trade secrets could be compromised by third parties, or intentionally or accidentally by our employees. It is also possible that others will independently develop technologies that are similar or superior to our technology. Third parties may also legally reverse engineer our products. Independent development, reverse engineering, or other legal copying of those elements of our proprietary technology that we attempt to protect as trade secrets could enable third parties to benefit from our technologies without compensating us. The protection of proprietary technology through claims of trade secret status has been the subject of increasing claims and litigation by various companies both in order to protect proprietary rights as well as for competitive reasons, even when proprietary claims are unsubstantiated. The prosecution of litigation to protect our trade secrets or the defense of such claims is costly and unpredictable given the uncertainty and rapid development of the principles of law pertaining to this area. We may also be subject to claims by other parties with regard to the use of technology information and data that may be deemed proprietary to others. The independent development of technologies that are similar or superior to our technology or the reverse engineering of our products by third parties would have a material adverse effect on our business and results of operations. In addition, the loss of our ability to use any of our trade secrets or other proprietary technology would have a material adverse effect on our business and results of operations. Because trade secrets do not ensure exclusivity and pose such issues with respect to enforcement, third parties may decline to partner with us or may pay lesser compensation for use of our technology which is protected only by trade secrets.
Our business depends on the protection of our patents and other intellectual property and may suffer if we are unable to adequately protect such intellectual property.
Our success and ability to compete are substantially dependent upon our intellectual property. We rely on patent, trademark and copyright laws, trade secret protection and confidentiality or license agreements with our employees, customers, strategic partners and others to protect our intellectual property rights. However, the steps we take to protect our intellectual property rights may be inadequate. There are events that are outside of our control that pose a threat to our intellectual property rights as well as to our products and services. For example, effective intellectual property protection may not be available in every country in which we license our technology or our products are distributed. Also, the efforts we have taken to protect our proprietary rights may not be sufficient or effective. Any impairment of our intellectual property rights could harm our business and our ability to compete. Also, protecting our intellectual property rights is costly and time consuming. Any increase in the unauthorized use of our intellectual property could make it more expensive to do business and harm our operating results. In addition, other parties may independently develop similar or competing technologies designed around any patents that may be issued to us.
We have been granted a number of U.S. patents and have several U.S. patent applications pending relating to certain aspects of our manufacturing technology and use of polyurethane to make tires and we may seek further patents on future innovations. Our ability to either manufacture products or license our technology is substantially dependent on the validity and enforcement of these patents and patents pending. We cannot guarantee that our patents will not be invalidated, circumvented or challenged, that patents will be issued for our patents pending, that the rights granted under the patents will provide us competitive advantages or that our current and future patent applications will be granted.
Third parties may invalidate our patents
Third parties may seek to challenge, invalidate, circumvent or render unenforceable any patents or proprietary rights owned by or licensed to us based on, among other things:
·
|
subsequently discovered prior art;
|
·
|
lack of entitlement to the priority of an earlier, related application; or
|
·
|
failure to comply with the written description, best mode, enablement or other applicable requirements.
|
United States patent law requires that a patent must disclose the “best mode” of creating and using the invention covered by a patent. If the inventor of a patent knows of a better way, or “best mode,” to create the invention and fails to disclose it, that failure could result in the loss of patent rights. Our decision to protect certain elements of our proprietary technologies as trade secrets and to not disclose such technologies in patent applications, may serve as a basis for third parties to challenge and ultimately invalidate certain of our related patents based on a failure to disclose the best mode of creating and using the invention claimed in the applicable patent. If a third party is successful in challenging the validity of our patents, our inability to enforce our intellectual property rights could seriously harm our business.
We may be liable for infringing the intellectual property rights of others.
Our products and technologies may be the subject of claims of intellectual property infringement in the future. Our technologies may not be able to withstand any third-party claims or rights against their use. Any intellectual property claims, with or without merit, could be time-consuming, expensive to litigate or settle, could divert resources and attention and could require us to obtain a license to use the intellectual property of third parties. We may be unable to obtain licenses from these third parties on favorable terms, if at all. Even if a license is available, we may have to pay substantial royalties to obtain it. If we cannot defend such claims or obtain necessary licenses on reasonable terms, we may be precluded from offering most or all of our products or services and our business and results of operations will be adversely affected.
Because our proposed tire products are derived from new technology, our product liability insurance costs will likely increase and we may be exposed to product liability risks that could adversely affect profitability.
Even if tests indicate that our tires meet performance standards and our new highway-use tire products are approved for use, these products may subject us to significant product liability claims because the technology is new and there is little history of on-road use. Moreover, because our products are and will be used in applications where their failure could result in substantial injury or death, we could also be subject to product liability claims. Introduction of such new products and increased use of our existing products will most likely increase our product liability premiums and defense of potential claims could increase insurance costs even further, which could substantially increase our expenses. Any insurance we obtain may not be sufficient to cover the losses incurred through such lawsuits.
Significant increases in the price of chemical raw materials, steel and other raw materials used in our products could increase our production costs and decrease our profit margins or make our products less competitive in the marketplace due to price increases.
The materials used to produce our products are susceptible to price fluctuations due to supply and demand trends, the economic climate and other unforeseen trends. With respect to both polyols and isocyanates, worldwide demand is increasing and may exceed current capacity. If we are successful in implementing our business strategy, the quantities of chemical raw materials required by us or by others that utilize our technology may increase significantly. Shortages, if any, may result in chemical price increases. We have experienced increases in the cost of wheel components due to the increased cost of steel, but no supply delays or shortages. However, we anticipate that we may experience an increase in steel wheel components at such time as the Chinese government cancels any export rebates it may be currently providing Chinese wheel manufacturers. Our raw materials pricing could increase further in the future. Because we are introducing products that will compete, in part, on the basis of price, we may be unable to pass cost increases on to our customers. If we are unable to pass on raw material cost increases to our customers, our future results of operations and cash flow will be materially adversely affected.
Our ability to execute our business plan would be harmed if we are unable to retain or attract key personnel.
Our polyurethane technology has been developed by a small number of the members of our management team and only a limited number of the members of our management team maintain the technical knowledge to produce our products. Our future success depends, to a significant extent, upon our ability to retain and attract the services of these and other key personnel. The loss of the services of one or more members of our management team could hinder our ability to effectively manage our business and implement our growth strategies. Finding suitable replacements could be difficult, and competition for such personnel of similar experience is intense. We do not carry key person insurance on any of our officers.
Shareholders and potential investors may experience some difficulty trading our stock since it is only quoted on the National Association of Securities Dealers (NASD) Over the Counter Bulletin Board.
Our common stock is quoted on NASD OTC Bulletin Board. As a result, secondary trading of our shares may be subject to certain state imposed restrictions and the ability of individual stockholders to trade their shares in a particular state may be subject to various rules and regulations of that state. A number of states require that an issuer's securities be registered in their state or appropriately exempted from registration before the securities are permitted to trade in that state. Further, our shares may be subject to the provisions of Section 15(g) and Rule 15g-9 of the Exchange Act, commonly referred to as the "penny stock" rule. Broker-dealers who sell penny stocks to persons other than established customers and accredited investors (generally persons with assets in excess of $1,000,000, excluding the value of a principal residence, or annual income exceeding $200,000 by an individual, or $300,000 together with his or her spouse), are subject to additional sales practice requirements.
For transactions covered by these rules, broker-dealers must make a special suitability determination for the purchase of such securities and must have received the purchaser's written consent to the transaction prior to the purchase. Additionally, for any transaction involving a penny stock, unless exempt, the rules require the delivery, prior to the first transaction, of a risk disclosure document relating to the penny stock market. A broker-dealer also must disclose the commissions payable to both the broker-dealer and the registered representative, and current quotations for the securities. Finally, monthly statements must be sent to clients disclosing recent price information for the penny stocks held in the account and information on the limited market in penny stocks. Consequently, these rules may restrict the ability of broker-dealers to trade and/or maintain a market in our common stock and may affect the ability of stockholders to sell their shares.
ITEM
1B. UNRESOLVED STAFF COMMENTS
As of June 30, 2013, we did not have any unresolved comments with the staff of the Securities and Exchange Commission.
In June 2012, we negotiated a two year extension of the lease on our executive office and manufacturing facility located at 1501 Industrial Road, Boulder City, Nevada. The property consists of a 49,200 square foot building, which includes approximately 5,500 square feet of office space, situated on approximately 4.15 acres. The extended lease commenced on July 1, 2012 and reduced the base rent to $11,000 per month. All other terms and conditions of the building lease remain in effect.
ITEM
3. LEGAL PROCEEDINGS
As of June 30, 2013, we were not involved in any legal proceedings.
Notes to the Financial Statements
June 30, 2013 and 2012
NOTE 1 - ORGANIZATION AND SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES
a. Organization
Amerityre Corporation, (the “Company”) was incorporated under the laws of the State of Nevada on January 30, 1995, under the name American Tire Corporation. The Company was organized to take advantage of existing proprietary and non-proprietary technology available for the manufacturing of specialty tires. The Company engages in the manufacturing, marketing, distribution and sales of “flat free” specialty tires and tire-wheel assemblies and currently is manufacturing these tires at its manufacturing facility located in Boulder City, Nevada. During the year ended June 30, 2001, the name of the Company was changed to Amerityre Corporation.
b. Accounting Method
The Company’s financial statements are prepared using the accrual method of accounting. The Company has elected a June 30 year-end.
c. Reclassifications
Prior period amounts have been adjusted to conform to the current year presentation.
d. Basic and Fully Diluted Net Loss per Share
Basis and Fully Diluted net loss per share is computed using the weighted-average number of common shares outstanding during the period.
The Company’s outstanding stock options, warrants, and shares issuable upon conversion of outstanding convertible notes have been excluded from the diluted net loss per share calculation. The Company excluded a total of 2,612,286 and 2,644,429 common stock equivalents for the years ended June 30, 2013 and 2012, respectively because they are anti-dilutive.
e. Estimates
The preparation of financial statements in conformity with generally accepted accounting principles requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenues and expenses during the reporting period. Actual results could differ from those estimates.
f. Income Taxes
Deferred taxes are provided on a liability method whereby deferred tax assets are recognized for deductible temporary differences and operating loss and tax credit carry-forwards and deferred tax liabilities are recognized for taxable temporary differences. Temporary differences are the differences between the reported amounts of assets and liabilities and their tax bases. Deferred tax assets are reduced by a valuation allowance when, in the opinion of management, it is more likely than not that some portion or all of the deferred tax assets will not be realized. Deferred tax assets and liabilities are adjusted for the effects of changes in tax laws and rates on the date of enactment.
AMERITYRE CORPORATION
Notes to the Financial Statements
June 30, 2013 and 2012
Net deferred tax assets consist of the following components as of June 30, 2013 and 2012:
|
|
2013
|
|
|
2012
|
|
Deferred tax assets:
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Section 1231 Loss Carryover
|
|
|
|
|
|
|
|
|
Allowance for Doubtful Accounts
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Deferred tax liabilities:
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The income tax provision differs from the amount of income tax determined by applying the U.S. federal income tax rate to pretax income from continuing operations for the years ended June 30, 2013 and 2012 due to the following:
|
|
2013
|
|
|
2012
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Gain/(Loss) on Asset Disposal
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
At June 30, 2013, the Company had net operating loss carry-forwards of approximately $42,795,000 that may be offset against future taxable income from the year 2013 through 2032. No tax benefit has been reported in the June 30, 2013 financial statements since the potential tax benefit is offset by a valuation allowance of the same amount. Due to the change in ownership provisions of the Tax Reform Act of 1986, net operating loss carry-forwards for Federal income tax reporting purposes are subject to annual limitations. Should a change in ownership occur, net operating loss carry-forwards may be limited as to use in future years.
ASC 740 requires a company to determine whether it is more likely than not that a tax position will be sustained upon examination based on the technical merits of the position. If the more-likely-than-not threshold is met, a company must measure the tax position to determine the amount to recognize in the financial statements. As a result of the implementation of ASC 740, the Company performed a review of its material tax positions in accordance with recognition and measurement standards established by ASC 740.
The Company files income tax returns in the U.S. federal jurisdiction, and in Utah. With few exceptions, the Company is no longer subject to U.S. federal, state and local, or non-U.S. income tax examinations by tax authorities for years before 2009.
We adopted the provisions of Accounting Standards Codification 740,
Income Taxes (ASC 740)
, on January 1, 2007. The Company’s policy is to recognize interest accrued related to unrecognized tax benefits in interest expense and penalties in operating expenses. As of June 30, 2013 the Company had no accrued interest or penalties related to uncertain tax positions.
AMERITYRE CORPORATION
Notes to the Financial Statements
June 30, 2013 and 2012
g. Inventory
Inventory is stated at the lower of cost (computed on a first-in, first-out basis) or market. The cost of finished goods includes the cost of raw material, direct and indirect labor, and other indirect manufacturing costs. The inventory consists of chemicals, finished goods produced in the Company’s plant and products purchased for resale.
We had an inventory reserve amount of $62,186 and $33,448 recorded as of June 30, 2013 and 2012, respectively, for items that were deemed to be slow moving based on an analysis of all inventories on hand.
h. Property and Equipment
Property and equipment are stated at cost. Expenditures for small tools, ordinary maintenance and repairs are charged to operations as incurred. Major additions and improvements are capitalized. When we retire or dispose of assets, the costs and accumulated depreciation or amortization are removed from the respective accounts and we recognize any related gain or loss. Repairs and maintenance are charged to expense when incurred. Major replacements that substantially extend the useful life of an asset are capitalized and depreciated. Depreciation is computed using the straight-line method over estimated useful lives as follows:
|
5 years, or over lease term
|
|
|
|
|
|
|
|
|
Depreciation expense for the years ended June 30, 2013 and 2012 was $189,297 and $214,472, respectively.
i. Revenue Recognition
Revenue for products is recognized when the sales amount is determined, shipment of goods to the customer has occurred and collection is reasonably assured. Generally, we ship all of our products FOB origination. License fee revenue is recognized as earned, and no revenue is recognized until the inception of the license term.
j. Patents and Trademarks
Patent and trademark costs have been capitalized at June 30, 2013, totaling $758,935 with accumulated amortization of $253,929 for a net book value of $505,006. Patent and trademark costs capitalized at June 30, 2012, totaled $760,530 with accumulated amortization of $229,308 for a net book value of $531,222. The patents which have been granted are being amortized over a period of 20 years. Patents which are pending or are being developed are not being amortized. Amortization will begin once the patents have been issued. Included in the total patent and trademark costs are $245,823 of patent and trademark costs pending that are not currently being amortized. Amortization expense for the years ended June 30, 2013 and 2012 was $24,621 and $29,458 respectively. The Company evaluates the recoverability of intangibles and reviews the amortization period on a continual basis utilizing the guidance of Accounting Standards Codification 350,
Intangibles – Goodwill and Other
(ASC 350). Several factors are used to evaluate intangibles, including, but not limited to, management’s plans for future operations, recent operating results and projected, undiscounted cash flows.
The estimated amortization expense, based on current intangible balances, for the next five fiscal years beginning July 1, 2013 is as follows:
AMERITYRE CORPORATION
Notes to the Financial Statements
June 30, 2013 and 2012
k. Advertising
The Company follows the policy of charging the costs of advertising to expense as incurred. Advertising expense for the years ended June 30, 2013 and 2012 was $13,108 and $19,154, respectively.
l. Stock Based-Compensation Expense
Since July 2005, we account for stock-based compensation under the provisions of Accounting Standards Codification 718,
Compensation – Stock Compensation
(ASC 718), formerly SFAS 123(R). Our financial statements as of and for the fiscal years ended June 30, 2013 and 2012 reflect the impact of ASC 718. Stock-based compensation expense recognized under ASC 718 for the fiscal years ended June 30, 2013 and 2012 was $73,721 and $92,910, respectively, related to employee stock options.
ASC 718 requires companies to estimate the fair value of share-based payment awards on the date of grant using an option-pricing model. The value of the portion of the award that is ultimately expected to vest is recognized as expense over the requisite service periods in our Statement of Operations. Stock-based compensation expense recognized in our Statements of Operations for fiscal years ended June 30, 2013 and 2012 assume all awards will vest; therefore no reduction has been made for estimated forfeitures.
m. Recent Accounting Pronouncements
There were no recent accounting pronouncements adopted by the Company during the year ended June 30, 2013.
n. Shipping and Handling
Shipping and Handling Fees require that freight costs charged to customers be classified as revenues. Freight expenses are included in costs of sales.
o. Trade Receivables
We generally charge-off trade receivables that are more than 120 days outstanding as bad-debt expense, unless management believes the amount to be collectable. The charge-off amounts are included in selling, general and administrative expenses. For the fiscal years ended June 30, 2013 and 2012, our bad debt (recovery) expense was ($26,450) and $18,805, respectively.
p. Equity Securities
Equity securities issued for services rendered have been accounted for at the fair market value of the securities on the date of authorization.
q. Concentrations of Risk
The Company maintains several accounts with financial institutions. Currently, the accounts are insured by the Federal Deposit Insurance Corporation up to $250,000.
Credit losses, if any, have been provided for in the financial statements and are based on management’s expectations. The Company’s accounts receivable are subject to potential concentrations of credit risk. The Company does not believe that it is subject to any unusual risks or significant risks in the normal course of its business.
We have two customers who accounted for 22% and 33% of our sales for the years ended June 30, 2013 and 2012, respectively.
AMERITYRE CORPORATION
Notes to the Financial Statements
June 30, 2013 and 2012
r. Valuation of Options and Warrants
The valuation of options and warrants granted to unrelated parties for services are measured as of the earlier of (1) the date at which a commitment for performance by the counterparty to earn the equity instrument is reached, or (2) the date the counterparty’s performance is complete. The options and warrants will continue to be revalued in situations where they are granted prior to the completion of the performance.
s. Sales Tax
In accordance with FASB ASC 605-45, formerly EITF Issue No. 06-3,
How Taxes Collected from Customers and Remitted to Government Authorities Should Be Presented in the Income Statement
, the Company accounts for sales taxes and value added taxes imposed on its good and services on a net basis in the consolidated statement of operations.
t. Cash and Cash Equivalents
We consider all highly liquid investments with a maturity of three months or less when purchased to be cash equivalents.
u. Product Warranties
The Company’s standard sales terms include a limited warranty on workmanship and materials to the original purchaser if items sold are used in the service for which they are intended. Specifically the Company warrants wheels, bearings, and bushings for one year from the date of purchase. The Company estimates its warranty reserve based on historical experience with warranty claims and returns for defective items. As of June 30, 2013 and 2012, the Company has estimated its warranty reserve and has recorded a liability of $0 and $0, respectively.
v. Related Party Transactions
Amerityre’s Chairman of the Board and Chief Executive Officer, Timothy L. Ryan, is also the principal owner of Rhino Rubber LLC, a manufacturing and distribution company for solid industrial tires and wheels. During fiscal 2013 and fiscal 2012, Rhino Rubber LLC purchased a total of $6,210 and $24,141, respectively, in tire products from Ameritye. As of June 30, 2013 and 2012, the accounts receivable balances for Rhino Rubber LLC were $30,018 and $22,981, respectively. The terms and conditions of those related-party sales transactions were the same as those afforded to any of Amerityre’s customers.
A former board member, Silas O. Kines, who passed away on January 11, 2012, was also the principal owner of Forklift Tire of Florida and K-2 Industrial Tire, Inc. Forklift Tire of Florida is a distributor primarily of Amerityre’s forklift product line. During fiscal 2013 and fiscal 2012, Forklift Tire of Florida purchased a total $0 and $21,663, respectively, in tire products from Amerityre. As of June 30, 2013 and 2012, the accounts receivable balances for Forklift Tire of Florida were $0 and $9,255, respectively. The terms and conditions of those related-party sales transactions were the same as those afforded to any of Amerityre’s customers. In accordance with the Commission Agreement, dated February 2, 2011, between Amerityre Corporation and K-2 Industrial Tire, Inc., K-2 is due a five percent (5%) commission on all forklift tire sales. In exchange for the forklift models transferred to Amerityre under that agreement, the first $96,000 in commission payments will be used to extinguish to the long term liability recorded on the transaction. As of June 30, 2013, $18,888 and $53,840 were recorded for the current and long-term portion, respectively, of the related liability. Since his passing, Mr. Kines is no longer considered a related party. As a result, the related receivables are not reflected as related party receivables on the balance sheet for the years ended June 30, 2013 and 2012.
NOTE 2 – COMMITMENTS AND CONTINGENCIES
In June 2012, we negotiated a two year extension of the lease on our executive office and manufacturing facility located at 1501 Industrial Road, Boulder City, Nevada. The property consists of a 49,200 square foot building, which includes approximately 5,500 square feet of office space, situated on approximately 4.15 acres. The extended lease commenced on July 1, 2012 and reduced the base rent to $11,000 per month. All other terms and conditions of the building lease remain in effect.
Also in April 2009, the Company terminated the consulting agreements between the Company and Richard A. Steinke and Manuel Chacon, who had been providing the Company with technology development and chemical formulating services, respectively. Each consulting agreement had an expiration date of August 31, 2009. The consulting agreements did not have a provision for early termination. At June 30, 2009, the Company provided for the contingent liability resulting from these early terminations.
AMERITYRE CORPORATION
Notes to the Financial Statements
June 30, 2013 and 2012
NOTE 3 – STOCK TRANSACTIONS
During the year ended June 30, 2013, the Company had the following stock transactions:
On August 1, 2012, the Board of Directors authorized an aggregate of 750,000 shares of restricted common stock to its directors for additional services provided during the six months ended June 30, 2012. The total value of the shares issued was $150,000 based on the closing market price on the authorization date of $0.20 per share. The value of the shares was accrued as stock-based compensation expense for the year ended June 30, 2012. The shares were issued in September 2012.
On March 5, 2013, the Company issued 250,000 shares of restricted common stock to a director for additional services provided during the six months ended December 31, 2012. The Company also issued 25,000 shares of restricted common stock to an employee as a performance bonus. The total value of the shares issued was $27,500 based on the market closing price on the authorization date of $0.10 per share.
NOTE 4 – STOCK OPTIONS AND WARRANTS
General Option Information
On July 6, 2011, the Board of Directors cancelled the “2004 Non-Employee Directors’ Stock Incentive Plan” and approved the "Directors’ 2011 Stock Option and Award Plan”. The Company also maintains the 2005 Stock Option and Award Plan, which was previously approved by shareholders, for the purpose of granting option awards to its employees and consultants. Under the 2011 Plan, a total of 3,300,000 shares are authorized for issuance. Each non-executive director is eligible to receive, based on their length of service, options to purchase a total of 300,000 shares at that day’s closing price, $0.17. Any options issued will vest over a three year service period as follows: 100,000 on June 30, 2012, 100,000 on June 30, 2013 and 100,000 on June 30, 2014. These options expire two years after vesting. The Director who serves as Audit Chair during the fiscal year will receive an additional 50,000 options per year under the same terms. CEO Timothy L. Ryan was granted 200,000 options per year under the same terms, under the 2005 Stock Option and Award Plan.
During the fiscal year ended June 30, 2013, the Company granted a total of 300,000 options to a director for his services on the Board of Directors. Those options were all cancelled during the year ended June 30, 2013, upon the director’s resignation from the Board. The Company also recognized $73,721 in expense related to the continued vesting of options that were granted during prior years.
We use the Black-Scholes model to value stock options. The Black-Scholes model requires the use of employee exercise behavior data and the use of a number of assumptions including volatility of our stock price, the weighted average risk-free interest rate, and the weighted average expected life of the options. Because we do not pay dividends, the dividend rate variable in the Black-Scholes model is zero.
We estimated the fair value of the stock options at the grant date based on the following weighted average assumptions:
|
|
2013
|
|
|
2012
|
|
|
|
.33
%
|
-
|
.75%
|
|
|
.33
%
|
-
|
.75%
|
|
Expected life
|
|
|
|
3.0 Years
|
|
|
|
|
3.0 Years
|
|
|
|
47.64
%
|
-
|
84.38%
|
|
|
47.64
%
|
-
|
84.38%
|
|
|
|
|
|
0.00%
|
|
|
|
|
0.00%
|
|
A summary of the status of our outstanding stock options as of June 30, 2013 and June 30, 2012 and changes during the periods then ended is presented below:
|
|
June 30, 2013
|
|
|
June 30, 2012
|
|
|
|
Shares
|
|
|
Weighted Average
Exercise Price
|
|
|
Shares
|
|
|
Weighted Average
Exercise Price
|
|
Outstanding beginning of period
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Outstanding end of period
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AMERITYRE CORPORATION
Notes to the Financial Statements
June 30, 2013 and 2012
The following table summarizes the range of outstanding and exercisable options as of June 30, 2013:
|
|
|
Outstanding
|
|
|
Exercisable
|
|
Range of
Exercise Prices
|
|
|
Number Outstanding at
June 30, 2013
|
|
|
Weighted
Average
Remaining
Contractual Life
|
|
|
Weighted
Average
Exercise Price
|
|
|
Number
Exercisable at
June 30, 2013
|
|
|
Weighted
Average Remaining
Contractual Life
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
As of June 30, 2013 and 2012, there was no unrecognized stock-based compensation related to stock options.
General Warrant Information
During the year ended June 30, 2013, none of the outstanding secured convertible promissory notes (the “Notes”) converted to common stock. As of June 30, 2013, there were 279,715 warrants issued and outstanding.
NOTE 5
–
GOING CONCERN
Our financial statements are prepared using generally accepted accounting principles applicable to a going concern which contemplates the realization of assets and liquidation of liabilities in the normal course of business. We have historically incurred significant losses, which have resulted in a total retained deficit of $59,196,728 at June 30, 2013, which raises a doubt about our ability to continue as a going concern The accompanying financial statements do not include any adjustments relating to the recoverability and classification of asset carrying amounts or the amount and classification of liabilities that might result from the outcome of this uncertainty.
Over the past year, management has been working on various proposals to secure short-term loans as well as long-term bank financing and equity based investments. During the third quarter of fiscal 2013, we were reasonably assured that at least $800,000 could be raised in a private offering of unsecured notes. However we only received $285,000 in cash proceeds from that offering. At the same time, we were informed that the support we anticipated for the bank financing would not be forthcoming. The reduced funding under the private offering along with the lack of support for the bank financing resulted in the reinstatement of the going concern opinion. In September 2013, we entered into an agreement in principle with a group of investors which would again allow us to pursue long-term bank financing. We are currently working with that group to prepare financial information for a bank loan application. It is estimated that the loan application process may take 2-3 months to complete. In the meantime, we will continue to pursue other financing opportunities.
The Company currently does not have an existing credit facility. Over the past year, management has worked with our vendors to obtain extended credit terms and increase credit lines. We also continue to maintain strong customer credit policies and procedures and aggressively pursue receivable collections.
Management is intent, in spite of losing a significant number of revenue growth opportunities due to cash flow constraints, on focusing on the sale and distribution of profitable product lines. Therefore Management is aggressively pursuing an expand and grow business plan that will require securing a financial facility required to maintain sufficient raw material and finished goods inventory levels to capitalize on revenue growth opportunities. No additional capital expenditures are anticipated over the next twelve months unless they support sales development and product improvement. Management is also working to reduce its overall costs as well.
The Company has increased its efforts to obtain financing through means that previously were not considered such as preferred stock offerings, structured debt, private equity funding and asset based lending. On September 30, 2012, we completed a private offering of convertible preferred stock, which generated net proceeds of $1,074,864. In January 2013, the Company received $285,000 in cash receipts from the sale of unsecured notes. We have also redeemed or converted $655,800 of the $755,800 in secured convertible promissory notes (the “Notes”) placed in September 2010. We will continue to pursue approval for financing in the form of structured debt.
AMERITYRE CORPORATION
Notes to the Financial Statements
June 30, 2013 and 2012
At the Annual Stockholder’s Meeting, held on December 4, 2012, the stockholders voted to amend the Company’s Article of Incorporation to increase the number of authorized shares of common stock from 40,000,000 shares to 55,000,000 shares. The increase allowed us to convert the preferred stock mentioned above into common stock. In addition, the increase provided the Company with approximately 11,133,000 shares authorized and available for issuance. These authorized but unissued and unreserved shares of our common stock can be utilized as necessary to fund the expansion of our manufacturing operations or to obtain additional working capital.
In connection with the preparation of our financial statements for the year ended June 30, 2013, we have analyzed our cash needs for the next twelve months. We have concluded that our available cash and accounts receivables are not sufficient to meet our current minimum working capital, capital expenditure and other cash requirements for this period. Moreover, we cannot assure that we will be able to obtain financing on favorable terms or at all. If we cannot obtain equity or bank financing, generate adequate sales of our products or increase our revenues through other means, then we may be forced to cease operations.
The accompanying financial statements do not include any adjustments that might be necessary in the event we are unable to continue as a going concern.
NOTE 6 – NOTE RECEIVABLE
In June 2007, we issued 200,000 shares of common stock in connection with the exercise of 200,000 options at an exercise price of $4.00 per share for aggregate proceeds of $200,000 in cash and an additional two (2) notes in the amount of $300,000 each. The notes were payable in equal annual installments over a 3 year period and bear interest at 8.5% per annum.
In December 2008, the original notes were replaced with a single note in the amount of $439,502. The note was payable in four (4) equal installments and bear interest of 4.5% per annum, together with accrued interest, commencing on November 30, 2009. A forbearance agreement, signed in December 2009, modified the November 30, 2009 payment to include the payment of unpaid interest plus monthly installments of $7,500 through October 2010 with a balance payment of $27,500 plus accrued interest due on November 1, 2010 which has been received. During October 2010 and November 2010, we received 20,000 shares each month of our restricted common stock as part of the monthly installment related to our note receivable. In November 2010, we also received 80,000 shares of our restricted common stock as final payment for the forbearance agreement dated December 2009. The shares were returned to the company for cancellation and are included in the Company’s authorized and unissued shares. Payment of the remaining balance of $343,238 was renegotiated with interest-only monthly installment payments beginning January 1, 2011 and five annual principal payments of approximately $69,000 due beginning December 1, 2011. In November 2011, the Board of Director’s negotiated a settlement to retire the Note Receivable entered into in June 2007 for the purchase of its common stock. Under the terms of the settlement agreement, the debtor paid the Company $100,000 and accrued interest of $1,287 in full settlement of the note receivable. As a related-party transaction, the Note Receivable has been included in the equity section of the balance sheet since its inception. The outstanding principal balance on the Note Receivable as of October 31, 2011 was $343,238. The difference between the outstanding balance and the settlement amount was charged against additional paid-in capital during the quarter ending March 31, 2012. Over the term of the Note, in addition to cash payments, the debtor has surrendered a large portion of the shares acquired in the original transaction.
NOTE 7 – NOTES PAYABLE AND SHORT-TERM BORROWINGS
In September 2010, we closed a private placement of secured convertible promissory notes (the “Notes”). We sold an aggregate of $755,800 in Notes. The Notes had a one year term with simple interest of 6.0%. The Notes are convertible at the holders’ option to our common stock at a conversion rate of $0.35 per share. The Notes are secured by all assets of the Company. Principal and interest are due at maturity of the Notes if the Notes are not converted. If the holder elects such conversion, for each two shares in the conversion, the holder shall also receive one warrant to purchase an additional share, exercisable at $0.60 per share for an exercise period of 2 years from the date of conversion. No officers, directors or affiliates of the Company participated in the private placement. The Notes were sold pursuant to subscription documents between the Company and each investor. In connection with the private placement of secured convertible promissory notes, on September 15, 2010, the Company issued 142,856 shares of restricted common stock as finders' fees. The aggregate value of the shares issued as finders’ fees was $50,000, based on the closing price of $0.36 per share. As of June 30, 2012, $460,000 of the Notes were redeemed; $195,800 of the Notes converted into 559,429 shares of common stock; and $100,000 of the Notes extended maturity until March 31, 2014. Interest due on the Notes as of June 30, 2013 was $4,500.
AMERITYRE CORPORATION
Notes to the Financial Statements
June 30, 2013 and 2012
In February 2013,
we closed a private placement of unsecured promissory notes (the “Unsecured Notes”). We sold an aggregate of $285,000 in Unsecured Notes. The Unsecured Notes mature on June 30, 2014 with a simple interest of 12 percent and no convertible provision. Interest due on the Unsecured Notes as of June 30, 2012 was $14,504.
In May 2013, we entered into a short-term loan agreement with a shareholder to finance bulk chemical purchases for a large customer order. The loan agreement is secured by customer purchase orders and uses a 2.0% factoring rate to determine the amount of the repayment. As of June 30, 2013, the Company had $124,200 in short-term loans outstanding.
NOTE 8 – SUBSEQUENT EVENTS
In March 2013, the U.S. Environmental Protection Agency (USEPA) began an audit of the Company for the calendar years 2008-2011. The Company was selected at random for the audit from the USEPA’s database of manufacturing companies located in Clark County, Nevada. In August 2013, the Company was notified by the USEPA of its initial findings of a “failure to report in a timely manner” and a “failure to provide supplier notification” regarding the usage of two chemicals used in our manufacturing process. The USEPA found no instances in which the Company had discharged any chemicals into the environment. Management is fully cooperating with the USEPA in resolving its failures to report, and has retroactively filed all necessary reports. Management is unable to determine the amount of penalties that may ultimately be assessed by the USEPA on these matters, if any. Accordingly, no accrual for any potential liability resulting from this matter is included in the accompanying financial statements.
In September 2013, the Company obtained an extension on the remaining $100,000 secured convertible promissory note that was issued in the private placement that closed in September 2010. Under the terms of the agreement, the maturity date on the note is extended through March 31, 2014. In exchange for the extension, the note holder will receive 500,000 stock warrants and $6,500 in accrued interest and fees. The stock warrants expire three years from the date of issuance, are exercisable at $0.13 per share, and vest on the next date the value of Amerityre common stock reaches $0.25 per share.
On September 18, 2013, the Board of Directors passed a resolution to extend the maturity date and reduce the exercise price on the warrants issued upon conversion of secured convertible promissory notes into common stock. The warrant maturity date was extended 60 days and the warrant exercise price was reduced from $0.60 per share to $0.15 per share. As of this filing, there were 279,715 warrants issued and outstanding.
Subsequent to June 30, 2013, the Company entered into three additional short-term borrowing agreements to finance bulk chemicals purchases for customer orders. All of the loan agreements are secured by customer purchase orders and use a 2.0% factoring rate to determine the amount of the repayment. As of September 20, 2013, the Company had $170,200 in short-term loans outstanding.
Management has evaluated subsequent events per the requirements of Topic 855 and has determined that there are no additional subsequent events to be reported.