DOWNERS GROVE, Ill.,
March 3, 2020 /PRNewswire/
-- Heil®, part of Environmental Solutions Group
(ESG)® and Dover® (NYSE: DOV), and
one of the nation's largest refuse truck body manufacturers, today
announced the launch of the Command-SST™ Automated Side Loader
(ASL).
The Command-SST incorporates a host of new technologies that
enhance safety, operational comfort, productivity and maintenance
simplicity. All of these enhancements are the result of extensive
customer-driven field research, backed by real-world testing to
deliver a product that is simple to operate, especially for
operators new to automated collection. Specifically, the
Command-SST design includes:
- New monitor-based guidelines that assist in positioning the arm
in the middle of the container, while the driver's eyes remain
forward-facing and focused on their surroundings. No more craning
the neck to see if the can is lined up correctly. These guidelines
are especially valuable to fleets with operators new to automated
collection.
- Innovative Command-SST arm geometry allows for above and below
grade can grabs (for snowbanks and ditches) as well as a feature to
pick up a cart that has tipped over, helping the operator to stay
in the cab for added safety.
- Significantly reduced arm lubrication points: 6 vs 25+ on other
ASLs. All lubrication points are easily accessible from the
ground.
- The arm can be completely swapped out in an hour by two people.
No other ASL manufacturer can say that.
- Increased maintenance simplicity through the reduction of
mechanical linkages. (For example, using sophisticated electronics
vs. mechanical components that may require
adjustment/replacement.)
- Fuel savings based on proven OdysseyTM hydraulic
load-sensing controls, which come standard on the Command-SST.
- Can-shake feature that helps to dislodge wet waste that can get
stuck in the cart and is accessible with the press of a single
button on the Command-SST's joystick.
President of Environmental Solutions Group, Pat Carroll, said, "The Command-SST is the
culmination of almost a decade of design and innovation, based on
customer feedback regarding unfulfilled needs. Our engineers used
this data to create a product that truly delivers on customer
performance expectations."
One of the primary objectives that Heil engineers addressed was
the development of an automated side loader that would thrive amid
operator and maintenance technician turnover, a problem identified
early on in customer interviews.
"We knew we had to deliver a side loader that was easier to
operate for new drivers and simple to maintain with fewer moving
parts," said Carroll. "The Command-SST has far fewer moving parts,
50% less cab shake for added operator comfort and an advanced
in-cab monitor system that keeps the operator's eyes forward during
cart acquisition and dump functions."
Eric Evans, Vice President of
Mobile Product Management explained the importance of operator
comfort and overall simplicity, both from a driver and a
maintenance perspective, as key to addressing personnel shortages
in the industry. "We've heard from all of our major customers that
both operator and mechanic retention has been a primary concern,
especially with the increased complexity of modern garbage trucks.
The Command-SST addresses these needs head-on with innovative
technologies that both the operator and the maintenance specialists
will appreciate."
The Command-SST's arm functionality allows operators to grab
carts in ditches, snowbanks or even carts that have tipped over,
all from the safety of the cab. Additionally, the arm has settings
that make it easier to grab cans that are positioned close
together.
From a maintenance standpoint, the Command-SST arm delivers with
far fewer moving parts and greatly reduced lubrication points that
are all accessible at ground level. The arm can also be completely
swapped out in an hour, something unheard of in the industry.
"From a complexity standpoint, Heil engineers delivered with an
arm that can be easily swapped out if the arm is damaged," said
Carroll. "This means that fleets running Command-SST's will have
better operational metrics and a far better return on investment.
That's all part of delivering the lowest Total Cost of
Collection."
The Command-SST is mounted to a Heil Durapack® body, which tips
the scales at 2,000 lbs. less than other side loaders, which
equates to better payloads and increased productivity. With the
Odyssey-inspired hydraulic controls, fleet owners can expect fuel
savings on par with our industry-leading Front Loader. With the arm
mounted to the body, the Command-SST also frees up valuable frame
space for next-generation technologies that require additional
chassis real estate.
For more information regarding the Command-SST from Heil,
contact your nearest dealer or point your browser to
www.heil.com.
About Heil®:
Established in 1901, Heil is one of the world's premier
manufacturers of ultra-durable, high productivity,
custom-configured garbage truck bodies with optimized chassis
integration and automation solutions that help customers achieve
the lowest cost of ownership. Their refuse collection bodies
include a wide variety of front loaders, side loaders, and rear
loaders. Heil bodies are known throughout the waste industry as
being legendary for productivity, long life, ease of maintenance,
and operator safety. Heil is a part of the Environmental Solutions
Group family of companies serving the waste industry. Heil has a
nationwide network of more than 40 dealers in over 60 locations
across the United States. They are
proud to be a leader in customer service and provide world-class
training, and after-the-sale support. For more information about
Heil, visit heil.com, the Heil Facebook page or follow Heil on
Twitter.
About Dover:
Dover is a diversified global manufacturer with annual revenue
of over $7 billion. We deliver
innovative equipment and components, specialty systems, consumable
supplies, software and digital solutions, and support services
through five operating segments: Engineered Products, Fueling
Solutions, Imaging & Identification, Pumps & Process
Solutions and Refrigeration & Food Equipment. Dover combines
global scale with operational agility to lead the markets we serve.
Recognized for our entrepreneurial approach for over 60 years, our
team of approximately 24,000 employees takes an ownership mindset,
collaborating with customers to redefine what's possible.
Headquartered in Downers Grove,
Illinois, Dover trades on the New York Stock Exchange under
"DOV." Additional information is available at
dovercorporation.com.
Environmental Solutions Group Contact:
Jeffry Swertfeger
(423) 648-5257
jswertfeger@doveresg.com
Dover Media Contact:
Adrian Sakowicz, VP,
Communications
(630) 743-5039
asakowicz@dovercorp.com
Dover Investor Contact:
Andrey Galiuk, VP, Corporate
Development and Investor Relations
(630) 743-5131
agaliuk@dovercorp.com
View original content to download
multimedia:http://www.prnewswire.com/news-releases/heil-launches-command-sst-automated-side-loader-301015640.html
SOURCE Dover