Kirkland Lake Gold Ltd. (“Kirkland Lake Gold” or
the “
Company”) (TSX:KL) (NYSE:KL) (ASX:KLA) today
announced new high-grade results from the ongoing underground
drilling programs at the Fosterville Mine in Victoria, Australia.
Recent underground drilling targeting additional growth in Mineral
Reserves and Mineral Resources confirmed significant continuity of
mineralization down-plunge and adjacent to existing Mineral
Reserves in the Lower Phoenix System. In addition, underground
infill drilling into Swan Mineral Reserves continues to return
exceptional high-grade results containing VG providing confirmation
of the geological model, underpinning confidence in the operation’s
mine plan. Drill results reported are from 206 holes (51,521 m)
that targeted infill and extension of the Lower Phoenix Mineral
Resources. Drill results reported are post the December 2018
Mineral Resource and Mineral Reserve update. (See press release
dated February 21, 2019.)
Tony Makuch, President and CEO of Kirkland Lake
Gold, commented: “We have an extensive exploration program at
Fosterville covering four main target areas, Lower Phoenix
down-plunge of Swan, Cygnet, Harrier and Robbin’s Hill (Figure 1).
Today’s results focus on the Lower Phoenix area. They are
encouraging as they include the extension of high-grade, VG-bearing
mineralization 80 m down-plunge of the Swan Zone and demonstrate
that Lower Phoenix is an extremely large gold system, with
continuity of the system having been confirmed to over 950 metres
down‑plunge of our deepest Mineral Reserves. In addition, we
continue to get strong results from drilling of the Cygnet Zone,
where we have intersected high-grade, VG-bearing mineralization,
including 239 g/t Au over 1.2 m (ETW 0.9 m). Such results provide
significant resource growth potential immediately adjacent to
existing underground infrastructure.
“We are also progressing well with other
components of our exploration program. At Robbin’s Hill, there have
been up to six surface drill rigs in operation over recent months,
with encouraging results which we plan to release shortly. We also
continue to drill the anticline offset target at Harrier South from
underground drill platforms and advance our LODE program on
district targets. Drilling at Harrier South remains at an early
stage given the time required to extend the existing exploration
drift and poor ground conditions encountered in some areas. The
fact that we have already intersected quartz veins with VG similar
in texture to those found in the Swan Zone is promising. We have
not yet seen the ultra-high grades you get at Swan, but it is early
days and we remain optimistic. Harrier South will continue to be a
high-priority target with extensive drilling to continue into, and
throughout, 2020.”
Lower Phoenix Extension Drilling
Program
During 2019, underground diamond drilling
targeting down-plunge of the Swan Mineral Reserves has continued to
return encouraging results, demonstrating the extensive down-plunge
extent of the Lower Phoenix System (Figure 2).
Progressive step out drilling over 2019 from the
Harrier Link Drill Drive, spaced at 100 m x 50 m centres has now
confirmed continuity of moderate to high-grade mineralization over
a down-plunge distance of 950 m from December 2018 Mineral Reserves
in the Lower Phoenix System (Figure 3). Reported drill results are
from 22 holes (16,611 m), and include moderate to high grade, large
width sulfide intercepts of 14.8 g/t Au over 5.9 m (ETW 4.5 m) in
hole UDE210, 6.2 g/t Au over 18.0 m (ETW 13.8 m) in hole UDE204 and
7.3 g/t Au over 8.8 m (ETW 6.7 m) in hole UDE199. The drilling has
now defined continuity of mineralization between the Swan and Lower
Phoenix South Resource blocks (Swan South Zone) and, with a high
frequency of 30 gram-metre intercepts, it is anticipated that
substantial additions of Inferred Mineral Resources will be
realized in end-of-year model updates as a result of this
program.
This drilling has also identified mineralization
directly footwall to Swan South in the Swan Footwall Splay Zone up
to 250 m down-plunge of December 2018 Mineral Reserves. Results of
2.8 g/t Au over 15.7 m (ETW 12.0 m) in hole UDE200A and 42.6 g/t Au
over 0.8 m (ETW 0.5 m) in hole UDE204 (Figure 4) highlight the
potential for Mineral Resource expansion immediately footwall to
the Swan South Zone down-plunge.
In August 2019, the establishment of the P4040
drill drive development enabled close space drill targeting of the
down-plunge extensions of the Swan Mineral Reserves down to 25 m x
25 m centres with the aim to extend Indicated Mineral Resources to
facilitate Mineral Reserve evaluation. Four underground drill rigs
have been located in this drill platform since August and results
returned demonstrate continuity of high-grade mineralization,
including occurrences of quartz vein hosted VG enveloped by sulfide
mineralization up to a distance of 150 m down-plunge of Mineral
Reserves (Figure 3). Two intercepts containing VG outside Mineral
Reserves are greater than 100 gram-m, with 87.6 g/t Au over 7.6 m
(ETW 5.5 m) in hole UDH3132 and 45.0 g/t Au over 5.2 m (ETW 4.7 m),
including 267 g/t Au over 0.7 m (ETW 0.7 m) in hole UDH3142 which
occur 40 m and 80 m down-plunge from Mineral Reserve respectively.
A further 11 drill hole intercepts from this program are greater
than 30 gram-m and it is anticipated that Mineral Reserves will be
extended down-plunge of the Swan Mineral Reserves in the end of
year model updates.
Cygnet Drilling Program
Exploration drilling footwall to Swan in 2018
discovered significant mineralization on a west southwesterly
dipping structure, Cygnet. Further drilling into the up-plunge
projection of this target has returned several high-grade
intercepts containing VG mineralization. Recent key intercepts into
the Cygnet Zone are listed below, with further details provided in
the commentary that follows:
Key Gold Intercepts:
- 239 g/t Au(1) over 1.2 m (ETW 0.9 m), including 701 g/t Au(1)
over 0.4 m (ETW 0.3 m) in hole UDE262;
- 28.4 g/t Au(1) over 1.8 m (ETW 1.5 m) in hole UDE247; and
- 11.2 g/t Au over 5.4 m (ETW 4.5 m) in hole UDH280 (1) Visible
gold drill intercept
Drill results returned to date in the Cygnet
Zone demonstrate strike continuity of mineralization over a
distance of approximately 650 m and dip continuity of
mineralization over a vertical distance of approximately 300 m
between the 6100mN and 6750mN and 4050RL and 3750RL (Figure 7).
The Cygnet structure sub-parallels the Swan
structure and is positioned approximately 125m footwall (east) of
the Swan Zone (Figure 6). The north northwest striking mineralized
structure transects the eastern limb of an anticline and an
anticline-syncline fold pair. The mineralized fault occurs east of
the main anticlinal axis, and has an interpreted reverse
displacement of approximately 30 m. A shallower structure named the
Pen Fault, splays from the Cygnet structure footwall to the Benu
Shale stratigraphic units and at the intersection point of these
two structures is where occurrences of quartz hosted VG
mineralization have been intersected. Further footwall
(approximately 70 m), another structure named the Cob Fault has
also been identified containing a consistent trend of sulfide
mineralization.
Drilling further down-plunge of 6100mN into the
projected position of the Cygnet Zone also demonstrates that
significant mineralization persists approximately 550 m
down-plunge. Four intercepts containing significant grades and
widths of sulfide mineralization highlight the growth potential
down-plunge on the Cygnet Zone including 11.1 g/t Au over 3.4 m
(ETW 2.4 m) in hole UDE200, 7.9 g/t Au over 3.1 m (ETW 2.6 m) in
hole UDE209, 6.6 g/t Au over 6.6 m (ETW 5.5 m) in hole UDE181A and
8.7 g/t Au over 2.3 m (ETW 2.1 m) in hole UDE185A.
Drilling undertaken to date in the Cygnet Zone
has demonstrated sufficient continuity of mineralization and the
Company expects to substantially extend Mineral Resources to the
north of the December 2018 Cygnet block which hosts an Inferred
Mineral Resource of 582Kt @ 6.9g/t Au for 120Koz Au. Opportunity
exists for further expansion of Mineral Resources to the north and
south and drill targeting of the Cygnet structure will continue
into 2020. Drilling will also focus on infill drilling of Mineral
Resources to increase geological confidence to facilitate mineral
reserve evaluation on this attractive growth target positioned in
close proximity to current infrastructure.
Swan Infill Drilling
Program
Results from the ongoing underground infill
drilling program targeting Swan, reaffirm the high-grade tenor of
the Swan Mineral Reserves. Since the December 2018 Swan Mineral
Reserve of 2.34Moz grading at 49.6 g/t Au, a total of 117 holes for
13,484 m have been drilled into this zone in 2019 for the purpose
of optimizing development and stope positioning. Of the 117 results
returned to date, 19 results returned greater than 1,000
gram-metres and an additional 44 results returned greater than 100
gram-metres (Figure 5). Key intercepts over 2,000 gram-metres
include;
High-Grade, Visible-Gold Bearing Intercepts >2000 gram-metres
include:
- 924 g/t Au over 3.6 m (ETW 3.2 m), including 6,590 g/t Au over
0.5 m (ETW 0.4 m) in hole UDH2872;
- 918 g/t Au over 7.0 m (ETW 6.8 m), including 1,722 g/t Au over
3.7 m (ETW 3.3 m) in hole UDH3024;
- 625 g/t Au over 3.6 m (ETW 3.3 m), including 6,123 g/t Au over
0.35 (ETW 0.3 m) in hole UDH2483;
- 488 g/t Au over 5.0 m (ETW 4.7 m), including 2,527 g/t Au over
1.0 m (ETW 0.9 m) in hole UDH3171;
- 229 g/t Au over 11.2 m (ETW 11 m), including 3,520 g/t Au over
0.6 m (ETW 0.6 m) in hole UDH3103;
- 365 g/t Au over 6.8 m (ETW 6.1 m), including 1,629 g/t Au over
1.2 m (ETW 1 m) in hole UDH3101;
- 367 g/t Au over 6.3 m (ETW 5.9 m), including 1,058 g/t Au over
2.1 m (ETW 2 m) in hole UDH2863
Intercepts through the Swan Footwall Splay also
returned some exceptional high-grade, VG intercepts, including one
over 2,000 gram-metres and a further three intercepts over 100
gram-metres. The Swan Footwall Splay Fault emanates from and
branches off the Swan Fault at approximately 6400mN and 4000mRL
(Figures 4 & 6). Mineralized widths containing significant VG
grades are typically largest on this fault immediately footwall to
the Swan Fault. Key infill intercepts returned that contain VG
mineralization include;
Key Gold Intercepts:
- 1,083 g/t Au over 2.8 m (ETW 2.6 m), including 8,610 g/t Au
over 0.4 m (ETW 0.3 m) in hole UDH3108;
- 40.8 g/t Au over 4.8 m (ETW 4.4 m) in hole UDH3103;
- 52.4 g/t Au over 2.2 m (ETW 2.0 m) in hole UDH3104; and
- 38.0 g/t Au over 3.8 m (ETW 3.5 m) in hole UDH3112
Results returned from infill drilling into the
Swan Mineral Reserves to a spacing of 12.5 m x 12.5 m have verified
the continuity of very high-grade mineralization in Swan. This
drilling, coupled with model reconciliation performance, has
provided increased confidence in the geological model which
underpins the mine plan.
To view the figures accompanying the
press release, please click on the following links:
Figure 1 – Location Map – Fosterville
Gold
Mine: https://www.globenewswire.com/NewsRoom/AttachmentNg/ab0f4632-2b7a-4edf-960e-9080974197a6
Figure 2 – Lower Phoenix
System: https://www.globenewswire.com/NewsRoom/AttachmentNg/a009bbdc-dc7b-43d9-a270-e67b70fa8ee6
Figure 3 – Swan South
Mineralization: https://www.globenewswire.com/NewsRoom/AttachmentNg/09b331b7-15e5-44e6-9949-87bff1c43d35
Figure 4 – Swan Footwall Splay
Mineralization: https://www.globenewswire.com/NewsRoom/AttachmentNg/f4406c30-0d5b-4012-ad55-188fade78691
Figure 5 – Swan Reserve
Mineralization: https://www.globenewswire.com/NewsRoom/AttachmentNg/c2261dcf-7bd3-4c46-b1cd-ea7c173e3851
Figure 6 – Cross Section, Lower Phoenix
and
Cygnet: https://www.globenewswire.com/NewsRoom/AttachmentNg/1c54b575-57ea-424e-b7f9-320369ea6272
Figure 7 – Cygnet, Pen & Cob Fault
Mineralization: https://www.globenewswire.com/NewsRoom/AttachmentNg/c1bbfefe-7664-48ac-aad9-b0feda2217a7
Qualified Persons
Troy Fuller, MAIG, Director of Exploration,
Australia, is a "Qualified Person" as such term is defined in
National Instrument 43-101 and has reviewed and approved the
technical information and data included in this News Release.
For further information regarding the Company’s
2018 Mineral Reserves and Mineral Resources estimates for the
Fosterville Gold Mine, please refer to the Company’s news release
dated February 21, 2019 and the Technical Report entitled “Updated
NI 43-101 Technical Report Fosterville Gold Mine In the State of
Victoria, Australia” effective December 31, 2018.
Drilling and Underground Sampling Assay
QAQC
Kirkland Lake Gold has in place quality-control
systems to ensure best practice in drilling, sampling and analysis
of drill core. All diamond drill hole collars (Table 2) are
accurately surveyed using a Leica TS16 Total Station instrument and
down-hole deviations are measured by either electronic gyro or
single-shot instruments.
Sampling consisted of diamond drill core that
was either full core or half core sampled. Half core samples were
cut longitudinally in half with a diamond saw; one-half of the
drill core was sent to an independent laboratory for analysis and
the other drill core half retained for
reference. Sample pulps are returned from the
assay laboratory for reference and future geological or
metallurgical studies. Drill core sample intervals vary between 0.3
and 1.2 m in length and were determined from logging of sulfide and
visible gold to geological boundaries.
Samples containing VG or considered likely to
contain VG were separated from sulfide gold samples and dispatched
independently for assaying. At the laboratory, “VG” jobs were
processed through a single pulverizer and material barren of gold
(‘quartz wash’) was crushed before and after each sample to
minimize the potential for gold to contaminate successive
samples.
Assays are either based on 25-gram or 40-gram
charge fire assay. Mean grades are calculated using a variable
lower grade cut-off (generally 2 g/t Au) and maximum 2 m internal
dilution. No upper gold grade cut is applied to the data. However,
during future Mineral Resource studies the requirement for assay
top cutting will be assessed.
The majority of samples were assayed at On Site
Laboratories, an independent laboratory in Bendigo, Victoria. The
facility is registered ISO 9001:2008 (CERT-C33510). Some samples
were assayed at Bureau Veritas, Adelaide. This facility is
registered ISO 9001 : 2015 (CERT RN – 44 100 160145) and NATA
accredited (1526).
About Kirkland Lake Gold
Ltd.
Kirkland Lake Gold Ltd. is a growing gold
producer operating in Canada and Australia that produced 723,701
ounces in 2018 and is on track to achieve significant production
growth over the next three years, including target production of
950,000 – 1,000,000 ounces in 2019, 930,000 – 1,010,000 ounces in
2020 and 995,000 – 1,055,000 ounces in 2021. The production profile
of the Company is anchored by two high-grade, low-cost operations,
including the Macassa Mine located in Northern Ontario and the
Fosterville Mine located in the state of Victoria, Australia.
Kirkland Lake Gold's solid base of quality assets is complemented
by district scale exploration potential, supported by a strong
financial position with extensive management and operational
expertise.
Cautionary Note Regarding
Forward-Looking Information
This News Release includes certain
"forward-looking statements". All statements other than statements
of historical fact included in this release are forward-looking
statements that involve various risks and uncertainties. These
forward-looking statements include, but are not limited to,
statements with respect to planned exploration programs, costs and
expenditures, changes in Mineral Resource estimates, potential
growth in Mineral Resources, conversion of Mineral Resources to
proven and probable Mineral Reserves, and other information that is
based on forecasts of future operational or financial results,
estimates of amounts not yet determinable and assumptions of
management. These forward-looking statements include, but are not
limited to, statements with respect to future exploration
potential, project economics, timing and scope of future
exploration, anticipated costs and expenditures, changes in mineral
resources and conversion of mineral resources to proven and
probable reserves, and other information that is based on forecasts
of future operational or financial results, estimates of amounts
not yet determinable and assumptions of management.
Any statements that express or involve
discussions with respect to predictions, expectations, beliefs,
plans, projections, objectives, assumptions or future events or
performance (often, but not always, using words or phrases such as
"expects" or "does not expect", "is expected", "anticipates" or
"does not anticipate", "plans", "estimates" or "intends", or
stating that certain actions, events or results "may", "could",
"would", "might" or "will" be taken, occur or be achieved) are not
statements of historical fact and may be "forward-looking
statements." Forward-looking statements are subject to a variety of
risks and uncertainties that could cause actual events or results
to differ from those reflected in the forward-looking statements.
Exploration results that include geophysics, sampling, and drill
results on wide spacings may not be indicative of the occurrence of
a mineral deposit. Such results do not provide assurance that
further work will establish sufficient grade, continuity,
metallurgical characteristics and economic potential to be classed
as a category of mineral resource. A mineral resource that is
classified as "inferred" or "indicated" has a great amount of
uncertainty as to its existence and economic and legal feasibility.
It cannot be assumed that any or part of an "indicated mineral
resource" or "inferred mineral resource" will ever be upgraded to a
higher category of resource. Investors are cautioned not to assume
that all or any part of mineral deposits in these categories will
ever be converted into proven and probable reserves.
There can be no assurance that forward-looking
statements will prove to be accurate and actual results and future
events could differ materially from those anticipated in such
statements. Important factors that could cause actual results to
differ materially from the Company’s expectations include, among
others, risks related to international operations, risks related to
obtaining the permits required to carry out planned exploration or
development work, the actual results of current exploration
activities, conclusions of economic evaluations and changes in
project parameters as plans continue to be refined as well as
future prices of gold, as well as those factors discussed in the
section entitled "Risk Factors" in the Company’s Annual Information
Form, financial statements and related MD&A for the periods
ended December 31, 2017 and March 31, 2018 and other disclosures of
"Risk Factors" by the Company and its predecessors, which are filed
with the securities regulatory authorities in certain provinces in
Canada and available on SEDAR. Although the Company has attempted
to identify key factors that could cause actual results to differ
materially, there may be other factors that cause unanticipated and
unintended results. There can be no assurance that such statements
will prove to be accurate as actual results and future events could
differ materially from those anticipated in such statements.
Accordingly, readers should not place undue reliance on
forward-looking statements.
Cautionary Note to U.S. Investors -
Mineral Reserve and Resource Estimates
All resource and reserve estimates included in
this news release or documents referenced in this news release have
been prepared in accordance with Canadian National Instrument
43-101 - Standards of Disclosure for Mineral Projects ("NI 43-101")
and the Canadian Institute of Mining, Metallurgy and Petroleum (the
"CIM") - CIM Definition Standards on Mineral Resources and Mineral
Reserves, adopted by the CIM Council, as amended (the "CIM
Standards"). NI 43-101 is a rule developed by the Canadian
Securities Administrators, which established standards for all
public disclosure an issuer makes of scientific and technical
information concerning mineral projects. The terms "mineral
reserve", "proven mineral reserve" and "probable mineral reserve"
are Canadian mining terms as defined in accordance with NI 43-101
and the CIM Standards. These definitions differ materially from the
definitions in SEC Industry Guide 7 ("SEC Industry Guide 7") under
the United States Securities Act of 1933, as amended, and the
Exchange Act.
In addition, the terms "mineral resource",
"measured mineral resource", "indicated mineral resource" and
"inferred mineral resource" are defined in and required to be
disclosed by NI 43-101 and the CIM Standards; however, these terms
are not defined terms under SEC Industry Guide 7 and are normally
not permitted to be used in reports and registration statements
filed with the U.S. Securities and Exchange Commission (the "SEC").
Investors are cautioned not to assume that all or any part of
mineral deposits in these categories will ever be converted into
reserves. "Inferred mineral resources" have a great amount of
uncertainty as to their existence, and great uncertainty as to
their economic and legal feasibility. It cannot be assumed that all
or any part of an inferred mineral resource will ever be upgraded
to a higher category. Under Canadian rules, estimates of inferred
mineral resources may not form the basis of feasibility or
pre-feasibility studies, except in very limited circumstances.
Investors are cautioned not to assume that all or any part of a
mineral resource exists, will ever be converted into a mineral
reserve or is or will ever be economically or legally mineable or
recovered.
FOR FURTHER INFORMATION PLEASE CONTACT
Anthony Makuch, President, Chief Executive
Officer & DirectorPhone: +1 416-840-7884E-mail:
tmakuch@klgold.com
Mark Utting, Vice-President, Investor Relations Phone: +1
416-840-7884 E-mail: mutting@klgold.com
Table
1: |
Drill
Assay Intercepts for the Swan, Swan Footwall Splay, Swan South,
Cygnet Zone and Cob Diamond Drilling, Lower Phoenix Mineralized
System, Fosterville Gold Mine |
|
(The results are later than those presented in the December 31,
2018 Technical Report on the Mineral Resources and Mineral Reserves
of The Fosterville Gold Mine, dated April 1, 2019, and available on
sedar.com) |
Hole ID |
From (m) |
To (m) |
Downhole Interval (m) |
Estimated True Width (m) |
Gold Grade (g/t Au) |
Geological Structure |
Swan Fault Mineralization - Drill Intercepts within Mineral
Reserves |
UDH2483 (1) |
353.65 |
357.25 |
3.6 |
3.3 |
625 |
Swan |
Including (1) |
353.65 |
354.0 |
0.35 |
0.3 |
6,123 |
Swan |
UDH2700 (1) |
362.45 |
371.4 |
8.95 |
8.4 |
10.9 |
Swan |
UDH2717 (1) |
100.15 |
107.25 |
7.1 |
4.8 |
381 |
Swan |
Including (1) |
101.2 |
102.2 |
1.0 |
0.7 |
922 |
Swan |
And (1) |
104.95 |
105.5 |
1.85 |
1.3 |
934 |
Swan |
UDH2729 (1) |
355.5 |
358.1 |
2.6 |
2.4 |
63.6 |
Swan |
Including (1) |
356.05 |
356.5 |
0.45 |
0.4 |
334 |
Swan |
UDH2787 |
157.35 |
164.3 |
6.95 |
6.5 |
26.0 |
Swan |
UDH2829 |
297.1 |
305.2 |
8.1 |
6.6 |
5.8 |
Swan |
UDH2832 (1) |
76.5 |
79.0 |
2.5 |
2.2 |
34.8 |
Swan |
UDH2834 |
77.65 |
80.45 |
2.8 |
2.3 |
19.1 |
Swan |
UDH2835 |
72.6 |
73.65 |
1.05 |
0.9 |
11.3 |
Swan |
UDH2836 (1) |
115.4 |
125.85 |
10.45 |
4.4 |
170 |
Swan |
Including (1) |
117.25 |
119.05 |
1.8 |
0.8 |
623 |
Swan |
UDH2837 (1) |
96.75 |
102.2 |
5.45 |
2.7 |
119 |
Swan |
Including (1) |
101.2 |
101.65 |
0.45 |
0.2 |
1,150 |
Swan |
UDH2838 (1) |
100.0 |
106.25 |
6.25 |
4.0 |
28.7 |
Swan |
UDH2839 (1) |
99.95 |
102.5 |
2.55 |
1.8 |
123 |
Swan |
Including (1) |
101.05 |
101.4 |
0.35 |
0.3 |
804 |
Swan |
UDH2840 (1) |
82.95 |
88.1 |
5.15 |
3.3 |
14.9 |
Swan |
UDH2841 |
92.35 |
92.7 |
0.35 |
0.2 |
19.9 |
Swan |
UDH2842 (1) |
83.2 |
92.1 |
8.9 |
5.1 |
123 |
Swan |
Including (1) |
88.1 |
89.25 |
1.15 |
0.7 |
874 |
Swan |
UDH2843 (1) |
76.4 |
78.1 |
1.7 |
1.5 |
704 |
Swan |
Including (1) |
76.4 |
77.0 |
0.6 |
0.5 |
1,410 |
Swan |
UDH2844 (1) |
81.1 |
84.0 |
2.9 |
2.6 |
37.4 |
Swan |
UDH2845 (1) |
70.0 |
77.7 |
7.7 |
7.2 |
133 |
Swan |
Including (1) |
72.2 |
74.9 |
2.7 |
2.5 |
352 |
Swan |
UDH2846 (1) |
82.0 |
84.8 |
2.8 |
2.3 |
202 |
Swan |
Including (1) |
83.15 |
84.15 |
1.0 |
0.8 |
560 |
Swan |
UDH2847 (1) |
106.45 |
109.45 |
3.0 |
1.5 |
55.9 |
Swan |
Including (1) |
108.3 |
108.7 |
0.4 |
0.2 |
400 |
Swan |
UDH2848 (1) |
95.3 |
98.05 |
2.75 |
1.8 |
234 |
Swan |
UDH2849 (1) |
96.5 |
97.2 |
2.7 |
2.2 |
840 |
Swan |
Including (1) |
96.5 |
99.2 |
0.7 |
0.6 |
3,220 |
Swan |
UDH2850 |
84.55 |
86.5 |
1.95 |
1.6 |
44.7 |
Swan |
UDH2851 (1) |
77.55 |
78.9 |
1.35 |
1.2 |
120 |
Swan |
UDH2852 |
70.45 |
74.0 |
3.55 |
2.7 |
10.6 |
Swan |
UDH2853 (1) |
71.15 |
75.7 |
4.55 |
3.9 |
302 |
Swan |
Including (1) |
72.5 |
74.15 |
1.65 |
1.4 |
824 |
Swan |
UDH2854 (1) |
69.0 |
72.6 |
3.6 |
3.3 |
287 |
Swan |
Including (1) |
72.0 |
72.6 |
0.6 |
0.5 |
1,710 |
Swan |
UDH2855 (1) |
67.9 |
69.3 |
1.4 |
1.3 |
40.3 |
Swan |
UDH2856 (1) |
66.05 |
67.4 |
1.35 |
1.3 |
339 |
Swan |
UDH2857 |
65.4 |
67.5 |
2.1 |
2.0 |
13.4 |
Swan |
UDH2858 (1) |
66.4 |
67.5 |
1.1 |
1.1 |
34.3 |
Swan |
UDH2859 (1) |
63.6 |
66.6 |
3.0 |
2.8 |
505 |
Swan |
Including (1) |
66.0 |
66.3 |
0.3 |
0.3 |
4,060 |
Swan |
UDH2860 (1) |
60.8 |
66.6 |
5.8 |
5.7 |
32.3 |
Swan |
Including (1) |
63.15 |
64.4 |
1.25 |
1.2 |
114 |
Swan |
UDH2862 (1) |
65.2 |
71.55 |
6.35 |
5.5 |
34.4 |
Swan |
Including (1) |
71.0 |
71.55 |
0.55 |
0.5 |
318 |
Swan |
UDH2863 (1) |
64.15 |
70.45 |
6.3 |
5.9 |
367 |
Swan |
Including (1) |
64.15 |
66.25 |
2.1 |
2.0 |
1,058 |
Swan |
UDH2864 (1) |
65.2 |
68.5 |
3.3 |
3.1 |
232 |
Swan |
Including (1) |
65.7 |
66.25 |
0.55 |
0.5 |
1,340 |
Swan |
UDH2865 (1) |
64.4 |
65.9 |
1.5 |
1.4 |
214 |
Swan |
Including (1) |
65.0 |
65.4 |
0.4 |
0.4 |
680 |
Swan |
UDH2866 (1) |
57.7 |
68.4 |
10.7 |
10.1 |
138 |
Swan |
Including (1) |
61.65 |
62.9 |
1.25 |
1.2 |
1,094 |
Swan |
UDH2867 |
61.25 |
62.95 |
1.7 |
1.6 |
10.4 |
Swan |
UDH2868 (1) |
57.0 |
67.2 |
10.2 |
9.9 |
45.2 |
Swan |
Including (1) |
59.55 |
59.85 |
0.3 |
0.3 |
1,180 |
Swan |
UDH2869 (1) |
54.25 |
67.5 |
13.25 |
12.0 |
145 |
Swan |
Including (1) |
59.9 |
62.1 |
2.2 |
2.0 |
840 |
Swan |
UDH2870 |
70.0 |
72.55 |
2.55 |
2.2 |
269 |
Swan |
UDH2871 (1) |
67.2 |
69.2 |
2 |
1.9 |
57.6 |
Swan |
Including (1) |
68.8 |
69.2 |
0.4 |
0.4 |
263 |
Swan |
UDH2872 (1) |
63.25 |
66.8 |
3.55 |
3.2 |
924 |
Swan |
Including (1) |
63.9 |
64.35 |
0.45 |
0.4 |
6,590 |
Swan |
UDH2873 |
83.4 |
84.9 |
1.5 |
1.2 |
36.2 |
Swan |
UDH2874 (1) |
80.35 |
83.9 |
3.55 |
2.9 |
117 |
Swan |
Including (1) |
80.8 |
81.7 |
0.9 |
0.7 |
430 |
Swan |
UDH2877 |
72.3 |
73.15 |
0.85 |
0.7 |
149 |
Swan |
UDH2878 |
76.3 |
78.2 |
1.9 |
1.6 |
33.6 |
Swan |
UDH2880 |
69.0 |
70.45 |
1.45 |
1.3 |
12.0 |
Swan |
UDH2882 |
68.5 |
69.7 |
1.2 |
1.0 |
128 |
Swan |
UDH2883 |
66.1 |
67.4 |
1.3 |
1.3 |
65.7 |
Swan |
UDH2917 |
55.8 |
56.5 |
0.7 |
0.5 |
6.0 |
Swan |
UDH2919 |
53.4 |
57.4 |
4 |
3.3 |
4.8 |
Swan |
UDH2920 |
53.7 |
64.0 |
10.3 |
7.4 |
12.8 |
Swan |
UDH2928 |
289.6 |
291.6 |
2.0 |
1.7 |
9.3 |
Swan |
UDH2971 |
63.4 |
65.8 |
2.4 |
1.8 |
10.0 |
Swan |
UDH2972 |
68.6 |
71.85 |
3.25 |
2.2 |
9.1 |
Swan |
UDH2973 |
70.4 |
72.7 |
2.3 |
2.0 |
4.5 |
Swan |
UDH2975 |
73.8 |
78.25 |
4.45 |
3.1 |
6.6 |
Swan |
UDH2976 |
82.6 |
87.7 |
5.1 |
3.8 |
15.8 |
Swan |
UDH2979 |
64.95 |
66.3 |
1.35 |
1.1 |
15.2 |
Swan |
UDH2981 |
79.3 |
84.1 |
4.8 |
2.6 |
5.1 |
Swan |
UDH2983 |
59.75 |
62.1 |
2.35 |
2.0 |
8.8 |
Swan |
UDH2984 |
84.0 |
87.1 |
3.1 |
2.7 |
8.2 |
Swan |
UDH2985 |
73.2 |
77.0 |
3.8 |
3.2 |
12.2 |
Swan |
UDH2986 |
78.1 |
88.45 |
10.38 |
8.8 |
9.2 |
Swan |
UDH2987 |
90.65 |
94.15 |
3.5 |
3.0 |
14.5 |
Swan |
UDH2995 (1) |
70.25 |
71.95 |
1.7 |
1.0 |
6.3 |
Swan |
UDH3017 (1) |
31.4 |
41.0 |
9.6 |
9.2 |
18.2 |
Swan |
UDH3023 (1) |
37.75 |
43.45 |
5.7 |
5.6 |
306 |
Swan |
Including (1) |
42.65 |
43.05 |
0.4 |
0.3 |
4,000 |
Swan |
UDH3024 (1) |
33.0 |
40.0 |
7.0 |
6.8 |
918 |
Swan |
Including (1) |
36.0 |
39.7 |
3.7 |
3.3 |
1,722 |
Swan |
UDH3054 |
111.8 |
113.5 |
1.7 |
1.5 |
26.4 |
Swan |
UDH3055 |
106.9 |
112.9 |
6.0 |
3.6 |
34.4 |
Swan |
UDH3060 (1) |
63.6 |
71.6 |
8.0 |
7.8 |
184 |
Swan |
UDH3061 (1) |
63.3 |
68.65 |
5.35 |
5.25 |
87.6 |
Swan |
UDH3063 (1) |
67.6 |
74.0 |
6.4 |
6.2 |
17.9 |
Swan |
UDH3064 |
92.85 |
96.6 |
3.75 |
2.5 |
3.9 |
Swan |
UDH3064A |
90.65 |
92.9 |
2.25 |
1.8 |
177 |
Swan |
UDH3065 (1) |
82.4 |
86.8 |
4.4 |
3.5 |
14.1 |
Swan |
UDH3066 (1) |
73.95 |
80.55 |
6.6 |
6.0 |
97.1 |
Swan |
UDH3067 (1) |
67.4 |
77.0 |
9.6 |
9.2 |
139 |
Swan |
UDH3076 |
49.45 |
52.05 |
2.6 |
1.4 |
33.2 |
Swan |
UDH3077 (1) |
58.2 |
62.7 |
4.5 |
2.2 |
320 |
Swan |
UDH3101 (1) |
77.5 |
84.25 |
6.75 |
6.1 |
365 |
Swan |
Including (1) |
81.0 |
82.15 |
1.15 |
1.0 |
1,629 |
Swan |
UDH3102 (1) |
75.65 |
77.7 |
2.05 |
2.0 |
34.1 |
Swan |
UDH3103 (1) |
65.1 |
76.3 |
11.2 |
11.0 |
229 |
Swan |
Including (1) |
68.7 |
69.3 |
0.6 |
0.6 |
3,520 |
Swan |
UDH3104 |
66.2 |
72.0 |
5.8 |
5.7 |
22.1 |
Swan |
UDH3105 (1) |
65.1 |
72.1 |
7.0 |
6.8 |
25.8 |
Swan |
Including (1) |
71.1 |
71.5 |
0.4 |
0.4 |
339 |
Swan |
UDH3106 (1) |
74.0 |
79.2 |
5.2 |
4.3 |
120 |
Swan |
Including (1) |
77.05 |
78.8 |
1.75 |
1.5 |
322 |
Swan |
UDH3107 |
96.35 |
97.3 |
0.95 |
0.7 |
7.6 |
Swan |
UDH3108 (1) |
83.45 |
88.55 |
5.1 |
4.2 |
48.8 |
Swan |
Including (1) |
85.9 |
86.3 |
0.4 |
0.3 |
368 |
Swan |
UDH3109 |
77.4 |
77.95 |
0.55 |
0.5 |
8.6 |
Swan |
UDH3110 (1) |
74.85 |
76.45 |
1.6 |
1.5 |
419 |
Swan |
Including (1) |
75.5 |
75.95 |
0.45 |
0.4 |
1,300 |
Swan |
UDH3111 (1) |
68.9 |
78.9 |
10.0 |
9.9 |
35.4 |
Swan |
Including (1) |
69.25 |
69.8 |
0.55 |
0.5 |
472 |
Swan |
UDH3112 (1) |
70.6 |
73.35 |
2.75 |
2.4 |
791 |
Swan |
Including (1) |
71.15 |
71.8 |
0.65 |
0.6 |
3,300 |
Swan |
UDH3113 (1) |
71.3 |
75.0 |
3.7 |
3.7 |
40.6 |
Swan |
Including (1) |
72.1 |
72.4 |
0.3 |
0.3 |
395 |
Swan |
UDH3114 |
70.7 |
74.2 |
3.5 |
2.7 |
16.4 |
Swan |
UDH3115 |
83.25 |
88.6 |
5.35 |
4.3 |
14.6 |
Swan |
UDH3116 |
94.25 |
95.1 |
0.85 |
0.8 |
31.4 |
Swan |
UDH3117 |
91.5 |
93.4 |
1.9 |
1.7 |
69.3 |
Swan |
UDH3118 (1) |
95.8 |
97.15 |
1.35 |
1.1 |
111 |
Swan |
Including (1) |
96.1 |
96.45 |
0.35 |
0.3 |
356 |
Swan |
UDH3119 |
198.9 |
212.15 |
13.25 |
11.5 |
3.0 |
Swan |
UDH3119 |
205.25 |
212.15 |
6.9 |
6.5 |
3.8 |
Swan |
UDH3119A |
199.8 |
203.1 |
3.3 |
3.1 |
7.0 |
Swan |
UDH3164 (1) |
101.85 |
103.65 |
1.8 |
1.6 |
15.9 |
Swan |
UDH3165 |
92.45 |
94.9 |
2.45 |
1.9 |
10.6 |
Swan |
UDH3166 (1) |
76.0 |
78.1 |
2.1 |
2.0 |
298 |
Swan |
Including (1) |
77.0 |
77.4 |
0.4 |
0.4 |
1,470 |
Swan |
UDH3171 (1) |
81.1 |
86.1 |
5.0 |
4.7 |
488 |
Swan |
Including (1) |
84.85 |
85.8 |
0.95 |
0.9 |
2,527 |
Swan |
UDH3172 (1) |
67.35 |
74.75 |
7.4 |
7.4 |
159 |
Swan |
Including (1) |
73.25 |
74.0 |
0.75 |
0.8 |
1,448 |
Swan |
UDH3174 (1) |
67.1 |
74.5 |
7.4 |
6.7 |
34.7 |
Swan |
Including (1) |
70.35 |
71.3 |
0.95 |
0.9 |
230 |
Swan |
UDH3176A |
83.6 |
87.05 |
3.45 |
3.4 |
12.6 |
Swan |
UDH3177 (1) |
88.0 |
95.4 |
7.4 |
6.1 |
39.5 |
Swan |
Including (1) |
94.8 |
95.1 |
0.3 |
0.3 |
730 |
Swan |
UDH3178 (1) |
84.7 |
92.7 |
8.0 |
5.1 |
131 |
Swan |
Including (1) |
86.35 |
86.65 |
0.3 |
0.2 |
2,250 |
Swan |
UDH3180 |
158.1 |
163.55 |
5.45 |
4.2 |
15.0 |
Swan |
UDH3184A (1) |
148.75 |
155.8 |
7.05 |
6.1 |
17.7 |
Swan |
Including (1) |
150.8 |
151.25 |
0.45 |
0.4 |
145 |
Swan |
UDH3186 (1) |
118.65 |
120.0 |
1.35 |
0.9 |
321 |
Swan |
Including (1) |
118.65 |
119.3 |
0.65 |
0.4 |
639 |
Swan |
UDH3188 (1) |
121.0 |
128.75 |
7.75 |
2.7 |
342 |
Swan |
Including (1) |
125.9 |
127.2 |
1.3 |
0.4 |
1,612 |
Swan |
Swan Footwall Splay Mineralization - Drill Intercepts
within Mineral Reserves |
UDH3061 |
77.55 |
78.7 |
1.15 |
1.1 |
18.8 |
Swan FW Splay |
UDH3063 |
93.65 |
95.0 |
1.35 |
1.0 |
5.4 |
Swan FW Splay |
UDH3101 |
95.9 |
96.7 |
0.8 |
0.7 |
6.5 |
Swan FW Splay |
UDH3102 |
87.6 |
88.7 |
1.1 |
1.0 |
6.5 |
Swan FW Splay |
UDH3103 (1) |
76.3 |
81.1 |
4.8 |
4.4 |
40.8 |
Swan FW Splay |
Including (1) |
79.05 |
79.35 |
0.3 |
0.3 |
267 |
Swan FW Splay |
UDH3104 (1) |
76.85 |
79.0 |
2.15 |
2.0 |
52.4 |
Swan FW splay |
Including (1) |
77.9 |
78.25 |
0.35 |
0.3 |
266 |
Swan FW splay |
UDH3105 |
82.35 |
83.95 |
1.6 |
1.5 |
4.2 |
Swan FW splay |
UDH3107 |
98.35 |
99.1 |
0.75 |
0.7 |
16.1 |
Swan FW splay |
UDH3108 (1) |
90.85 |
93.65 |
2.8 |
2.6 |
1,083 |
Swan FW splay |
Including (1) |
90.85 |
91.2 |
0.35 |
0.3 |
8,610 |
Swan FW splay |
UDH3109 |
84.1 |
86.0 |
1.9 |
1.9 |
4.4 |
Swan FW splay |
UDH3111 (1) |
81.2 |
82.5 |
1.3 |
1.3 |
62.4 |
Swan FW splay |
UDH3112 (1) |
83.45 |
84.25 |
3.75 |
3.5 |
38.0 |
Swan FW splay |
Including (1) |
83.75 |
84.25 |
0.5 |
0.5 |
229 |
Swan FW splay |
UDH3113 |
84.1 |
85.8 |
1.7 |
1.6 |
28.6 |
Swan FW splay |
UDH3114 |
92.2 |
97.1 |
4.9 |
4.9 |
6.9 |
Swan FW splay |
UDH3115 |
95.15 |
96.3 |
1.15 |
0.4 |
8.0 |
Swan FW splay |
UDH3166 |
82.2 |
85.0 |
2.8 |
2.6 |
13.0 |
Swan FW splay |
UDH3060 |
76.25 |
79.1 |
2.85 |
2.7 |
2.9 |
Swan FW Splay |
Swan South Mineralization - Drill Intercepts outside of
Mineral Reserves |
UDE175A |
941.3 |
956.2 |
14.9 |
11.4 |
4.4 |
Swan South |
UDE181A |
927.1 |
932.55 |
5.45 |
4.2 |
8.7 |
Swan South |
UDE184 |
819.75 |
823.0 |
3.25 |
2.5 |
8.8 |
Swan South |
UDE184A |
803.7 |
808.6 |
4.9 |
3.8 |
6.7 |
Swan South |
UDE184B |
772.6 |
777.0 |
4.4 |
3.4 |
5.0 |
Swan South |
UDE184C |
772.45 |
777.4 |
4.95 |
3.8 |
6.8 |
Swan South |
UDE185A |
871.9 |
879.1 |
7.2 |
7.1 |
7.9 |
Swan South |
UDE199 |
773.0 |
781.75 |
8.75 |
6.7 |
7.3 |
Swan South |
UDE200 |
716.5 |
732.0 |
15.5 |
11.9 |
4.9 |
Swan South |
UDE200A |
719.0 |
726.8 |
7.8 |
6.0 |
4.6 |
Swan South |
UDE201 |
835.45 |
837.65 |
2.2 |
1.7 |
0.2 |
Swan South |
UDE203 |
622.4 |
626.4 |
4.0 |
3.1 |
2.2 |
Swan South |
UDE204 |
634.3 |
652.3 |
18 |
13.8 |
6.2 |
Swan South |
UDE205 |
627.5 |
633.65 |
6.15 |
4.7 |
10.4 |
Swan South |
UDE206 |
656.9 |
660.0 |
3.1 |
2.4 |
5.5 |
Swan South |
UDE207 |
759.2 |
759.7 |
0.5 |
0.4 |
0.0 |
Swan South |
UDE208 |
675.0 |
681.8 |
6.8 |
5.2 |
9.9 |
Swan South |
Including |
678.2 |
678.7 |
0.5 |
0.4 |
65.2 |
Swan South |
UDE209 |
681.5 |
685.0 |
3.5 |
2.7 |
1.8 |
Swan South |
UDE210 |
709.6 |
715.5 |
5.9 |
4.5 |
14.8 |
Swan South |
UDE211 |
729.4 |
735.2 |
5.8 |
4.4 |
7.6 |
Swan South |
UDE212A |
1045.1 |
1045.5 |
0.4 |
0.3 |
2.6 |
Swan South |
UDE265 |
621.2 |
621.8 |
0.6 |
0.5 |
2.1 |
Swan South |
UDH2482 |
390.0 |
402.65 |
12.65 |
7.3 |
3.6 |
Swan South |
UDH2489 (1) |
386.0 |
391.0 |
5.0 |
4.7 |
59.1 |
Swan South |
Including (1) |
389.3 |
390 |
0.7 |
0.7 |
319 |
Swan South |
UDH2831 |
257.0 |
258.7 |
1.7 |
1.6 |
14.6 |
Swan South |
UDH3068 (1) |
67.3 |
75.0 |
7.7 |
7.5 |
63.2 |
Swan South |
UDH3094 |
392.4 |
393.25 |
0.85 |
0.8 |
6.2 |
Swan South |
UDH3120 |
202.3 |
212.7 |
10.4 |
10.1 |
8.0 |
Swan South |
UDH3122 |
199.1 |
204.3 |
5.2 |
4.2 |
5.8 |
Swan South |
UDH3123 |
199.3 |
200.1 |
0.8 |
0.8 |
2.8 |
Swan South |
UDH3124 |
198.6 |
199.8 |
1.2 |
1.1 |
12.5 |
Swan South |
UDH3126 |
254.45 |
260.9 |
6.45 |
5.6 |
6.4 |
Swan South |
UDH3127 (1) |
249.9 |
253.35 |
3.45 |
3.0 |
19.7 |
Swan South |
Including (1) |
251.8 |
252.1 |
0.3 |
0.3 |
141 |
Swan South |
UDH3128 |
230.1 |
233.95 |
3.85 |
3.5 |
8.5 |
Swan South |
UDH3129 |
237.0 |
240.5 |
3.5 |
2.9 |
8.1 |
Swan South |
UDH3130 |
231.85 |
234.0 |
2.15 |
2.0 |
13.1 |
Swan South |
UDH3131 (1) |
266.7 |
277.85 |
11.2 |
9.7 |
6.8 |
Swan South |
UDH3132 (1) |
268.3 |
275.85 |
7.55 |
5.5 |
87.6 |
Swan South |
UDH3133A |
299.35 |
300.1 |
0.75 |
0.7 |
5.4 |
Swan South |
UDH3134 |
299.0 |
303.0 |
4.0 |
2.8 |
2.7 |
Swan South |
UDH3135 |
248.2 |
255.5 |
7.3 |
6.7 |
6.4 |
Swan South |
UDH3136 |
254.8 |
259.9 |
5.1 |
5.0 |
4.3 |
Swan South |
UDH3137 (1) |
246.9 |
249.4 |
2.5 |
2.1 |
2.2 |
Swan South |
UDH3138 |
249.25 |
253.9 |
4.65 |
4.2 |
5 |
Swan South |
UDH3139 |
247.2 |
251.2 |
4.0 |
3.7 |
6.3 |
Swan South |
UDH3140 |
237.7 |
241.3 |
3.6 |
3.5 |
9.3 |
Swan South |
UDH3141 |
239.65 |
240.7 |
1.05 |
1.0 |
4.3 |
Swan South |
UDH3142 (1) |
255.5 |
260.65 |
5.15 |
4.7 |
45 |
Swan South |
Including (1) |
258.7 |
259.4 |
0.7 |
0.7 |
267 |
Swan South |
UDH3143 |
270.2 |
283.1 |
12.9 |
12.1 |
26.4 |
Swan South |
UDH3145 (1) |
242.25 |
243.5 |
1.25 |
1.2 |
40.4 |
Swan South |
Including (1) |
242.25 |
242.95 |
0.7 |
0.7 |
73.6 |
Swan South |
UDH3146 (1) |
239.1 |
245.5 |
6.4 |
6.3 |
4.6 |
Swan South |
UDH3148 |
236.65 |
240.3 |
3.65 |
3.6 |
8.5 |
Swan South |
UDH3148A |
235.9 |
240.0 |
4.1 |
3.6 |
5.9 |
Swan South |
UDH3149 |
245.45 |
249.6 |
4.15 |
4.0 |
6.9 |
Swan South |
UDH3149A |
238.0 |
239.7 |
1.7 |
1.6 |
16.0 |
Swan South |
UDH3150 |
231.1 |
237.6 |
6.5 |
6.5 |
9.0 |
Swan South |
UDH3151 |
234.4 |
236.45 |
2.05 |
1.9 |
6.2 |
Swan South |
UDH3153 |
234.0 |
237.3 |
3.3 |
3.3 |
8.9 |
Swan South |
UDH3154 |
238.75 |
245.45 |
6.7 |
6.3 |
13.5 |
Swan South |
UDH3156 |
242.0 |
249.2 |
7.2 |
7.1 |
8.7 |
Swan South |
UDH3179 |
152.55 |
155.45 |
2.9 |
2.9 |
7.1 |
Swan South |
UDH3182 |
139.2 |
140.5 |
1.3 |
1.1 |
4.5 |
Swan South |
UDH3183 |
142.2 |
143.7 |
1.5 |
1.2 |
10.2 |
Swan South |
UDH3228 |
248.0 |
250.05 |
2.05 |
1.8 |
5.2 |
Swan South |
Swan Footwall Splay Mineralization - Drill Intercepts
outside of Mineral Reserves |
UDE200A |
728.25 |
743.95 |
15.7 |
12.0 |
2.8 |
Swan FW Splay |
UDE204 |
671.9 |
672.7 |
0.8 |
0.5 |
42.6 |
Swan FW Splay |
UDE208 |
684.5 |
687.0 |
2.5 |
2.3 |
6.2 |
Swan FW Splay |
UDH3124 |
225.2 |
226.0 |
0.8 |
0.8 |
17.9 |
Swan FW Splay |
UDH3130 |
248.0 |
249.1 |
1.1 |
1.0 |
7.9 |
Swan FW splay |
Cygnet Mineralized Zone - Drill intercepts outside of
Mineral Reserves |
UDE181A |
1,124.05 |
1,130.65 |
6.6 |
5.5 |
6.6 |
Cygnet |
Including |
1,127.1 |
1,127.4 |
0.3 |
0.3 |
27.9 |
Cygnet |
UDE184A |
956.7 |
957.0 |
0.3 |
0.3 |
1.8 |
Cygnet |
UDE185A |
1,054.6 |
1,056.9 |
2.3 |
2.1 |
8.7 |
Cygnet |
UDE195 |
222.0 |
280.7 |
58.7 |
20.0 |
4.8 |
Cygnet |
UDE201 |
1030.5 |
1031 |
0.5 |
0.4 |
2.7 |
Cygnet |
UDE203 |
770.6 |
771.0 |
0.4 |
0.3 |
2.9 |
Cygnet |
UDE204 |
820.7 |
821.0 |
0.3 |
0.3 |
5.0 |
Cygnet |
UDE205 |
804.45 |
804.9 |
0.45 |
0.4 |
4.6 |
Cygnet |
UDE206 |
848.1 |
848.4 |
0.3 |
0.3 |
5.0 |
Cygnet |
UDE207 |
1011.5 |
1011.95 |
0.5 |
0.4 |
2.1 |
Cygnet |
UDE208 |
790.6 |
790.9 |
0.3 |
0.3 |
1.8 |
Cygnet |
UDE209 |
888.0 |
891.1 |
3.1 |
2.6 |
7.9 |
Cygnet |
UDE210 |
916.6 |
917.3 |
0.7 |
0.6 |
3.2 |
Cygnet |
UDE211 |
975.2 |
977.8 |
2.6 |
2.2 |
3.3 |
Cygnet |
UDE243 |
617.15 |
619.75 |
2.6 |
2.5 |
2.8 |
Cygnet |
UDE245 |
207.7 |
208.9 |
1.2 |
1.1 |
2.2 |
Cygnet |
UDE246 |
225.9 |
227.4 |
1.5 |
1.2 |
11.5 |
Cygnet |
UDE247 (1) |
212.6 |
214.4 |
1.8 |
1.5 |
28.4 |
Cygnet |
UDE248 |
277.05 |
278.65 |
1.6 |
1.3 |
7.9 |
Cygnet |
UDE249 |
315.45 |
316.75 |
1.3 |
1.1 |
8.3 |
Cygnet |
UDE250 |
338.9 |
340.0 |
1.1 |
0.9 |
3.4 |
Cygnet |
UDE258 |
296.1 |
297.15 |
1.05 |
0.9 |
3.0 |
Cygnet |
UDE259 |
318.4 |
325.2 |
6.8 |
5.6 |
4.4 |
Cygnet |
UDE260 |
319.2 |
320.9 |
1.7 |
1.0 |
3.5 |
Cygnet |
UDE261 |
364.1 |
365.3 |
1.2 |
1.0 |
9.3 |
Cygnet |
UDE263 |
391.35 |
392.35 |
1.0 |
0.8 |
7.3 |
Cygnet |
UDE265 |
754.95 |
756.25 |
1.3 |
1.1 |
9.4 |
Cygnet |
UDE280 |
274.65 |
280.05 |
5.4 |
4.5 |
11.2 |
Cygnet |
UDE282 |
355.3 |
357.5 |
2.2 |
1.2 |
0.1 |
Cygnet |
UDE282A |
356.0 |
357.0 |
1.0 |
0.8 |
0.0 |
Cygnet |
UDH2831 |
371.0 |
377.0 |
6.0 |
5.7 |
6.1 |
Cygnet |
UDH2886 |
384.65 |
388.15 |
3.5 |
3.2 |
11.4 |
Cygnet |
UDH2887 |
400.65 |
405.6 |
4.95 |
3.8 |
4.1 |
Cygnet |
UDH2928 |
379.0 |
381.95 |
3.0 |
2.8 |
4.9 |
Cygnet |
UDH2931 |
97.0 |
101.3 |
4.3 |
2.3 |
3.3 |
Cygnet |
UDH2932 |
58.0 |
59.2 |
1.2 |
1.0 |
18.8 |
Cygnet |
UDH2933 |
69.9 |
73.85 |
3.95 |
3.0 |
11.4 |
Cygnet |
UDH3068 |
208.1 |
209.75 |
1.65 |
1.4 |
6.1 |
Cygnet |
UDH3094 |
477.4 |
479.55 |
2.15 |
1.9 |
7.2 |
Cygnet |
UDH3122 |
266.7 |
272.6 |
5.3 |
5.2 |
12.3 |
Cygnet |
UDH3163 |
341.25 |
343.0 |
1.75 |
1.4 |
2.6 |
Cygnet |
UDH3203 |
325.0 |
327.2 |
2.2 |
1.4 |
2.4 |
Cygnet |
UDH3106 |
240.1 |
240.8 |
0.7 |
0.5 |
10.7 |
Cygnet |
UDE248 (1) |
194.55 |
196.05 |
1.5 |
1.3 |
9.2 |
Pen |
UDE249 |
225.95 |
226.7 |
0.75 |
0.3 |
7.3 |
Pen |
UDE259 |
272.3 |
272.6 |
0.3 |
0.3 |
0.0 |
Pen |
UDE261 |
333.55 |
334.55 |
1.0 |
0.6 |
23.1 |
Pen |
UDE262 (1) |
317.7 |
318.9 |
1.2 |
0.9 |
239 |
Pen |
Including (1) |
318.05 |
318.45 |
0.4 |
0.3 |
701 |
Pen |
UDE263 |
315.2 |
316.1 |
0.9 |
0.5 |
5.7 |
Pen |
UDE280 |
198.0 |
200.6 |
2.6 |
2.1 |
3.1 |
Pen |
Cob Fault Mineralization - Drill Intercepts outside of
Mineral Reserves |
UDE184 |
1,049.0 |
1,051.0 |
2.0 |
1.7 |
5.7 |
Cob |
UDE185A |
1,079.7 |
1,080.4 |
0.7 |
0.6 |
5.7 |
Cob |
UDE200 |
922.25 |
925.65 |
3.4 |
2.4 |
11.1 |
Cob |
|
Notes: |
|
(1) – Visible-gold observed in drill intercept.Drill intercepts
greater than 30 Gram-Metre (gold grade x estimated true width) or
containing visible-gold are shown in bold text.For Table 2 (below),
collar locations are in Fosterville Mine Grid coordinate system.For
Table 2 (below), Collar Plunges with negative values indicate
drilling downwards from the horizontal. |
Table 2:
Underground Diamond Drill Hole Collar
Locations, Fosterville Gold Mine
Hole ID |
Northing (m) |
Easting (m) |
Elevation (m) |
Collar Azimuth (°) |
Collar Plunge (°) |
Total Depth (m) |
Drilled Metres |
Underground Diamond Drilling inside Swan Mineral
Reserves |
UDH2483 |
6,226 |
1,341 |
4,194 |
84.9 |
-43.8 |
377.9 |
377.9 |
UDH2700 |
6,226 |
1,341 |
4,194 |
92.0 |
-63.0 |
431.8 |
431.8 |
UDH2717 |
6,577 |
1,622 |
4,101 |
229.4 |
-14.4 |
117.0 |
117.0 |
UDH2729 |
6,226 |
1,341 |
4,195 |
86.0 |
-49.5 |
384.2 |
384.2 |
UDH2787 |
6,392 |
1,395 |
4,055 |
96.2 |
-39.9 |
219.0 |
219.0 |
UDH2829 |
6,353 |
1,406 |
4,192 |
113.7 |
-31.5 |
349.0 |
349.0 |
UDH2832 |
6,401 |
1,512 |
4,044 |
40.0 |
2.0 |
89.0 |
89.0 |
UDH2834 |
6,401 |
1,511 |
4,045 |
48.0 |
5.0 |
96.0 |
96.0 |
UDH2835 |
6,401 |
1,512 |
4,044 |
54.0 |
-1.0 |
88.0 |
88.0 |
UDH2836 |
6,410 |
1,497 |
4,045 |
17.0 |
17.0 |
147.4 |
147.4 |
UDH2837 |
6,410 |
1,497 |
4,045 |
17.0 |
9.0 |
119.3 |
119.3 |
UDH2838 |
6,410 |
1,497 |
4,045 |
29.0 |
13.5 |
123.4 |
123.4 |
UDH2839 |
6,410 |
1,498 |
4,045 |
36.0 |
13.0 |
114.0 |
114.0 |
UDH2840 |
6,410 |
1,497 |
4,045 |
27.0 |
6.0 |
108.1 |
108.1 |
UDH2841 |
6,410 |
1,497 |
4,045 |
35.0 |
9.0 |
105.0 |
105.0 |
UDH2842 |
6,410 |
1,497 |
4,044 |
18.0 |
2.0 |
101.8 |
101.8 |
UDH2843 |
6,410 |
1,497 |
4,044 |
19.0 |
-9.0 |
93.0 |
93.0 |
UDH2844 |
6,410 |
1,497 |
4,044 |
25.0 |
-2.0 |
98.5 |
98.5 |
UDH2845 |
6,410 |
1,497 |
4,044 |
27.0 |
-10.0 |
92.4 |
92.4 |
UDH2846 |
6,410 |
1,497 |
4,044 |
33.0 |
1.0 |
93.0 |
93.0 |
UDH2847 |
6,397 |
1,514 |
4,045 |
27.0 |
16.0 |
116.8 |
116.8 |
UDH2848 |
6,397 |
1,514 |
4,045 |
39.0 |
15.5 |
115.0 |
115.0 |
UDH2849 |
6,396 |
1,514 |
4,045 |
29.0 |
11.0 |
107.5 |
107.5 |
UDH2850 |
6,396 |
1,514 |
4,045 |
28.0 |
4.0 |
104.9 |
104.9 |
UDH2851 |
6,397 |
1,514 |
4,044 |
26.0 |
-4.0 |
98.9 |
98.9 |
UDH2852 |
6,396 |
1,514 |
4,044 |
41.0 |
-4.0 |
84.0 |
84.0 |
UDH2853 |
6,396 |
1,514 |
4,044 |
24.0 |
-11.0 |
84.0 |
84.0 |
UDH2854 |
6,396 |
1,514 |
4,044 |
33.0 |
-9.0 |
81.0 |
81.0 |
UDH2855 |
6,396 |
1,514 |
4,044 |
45.0 |
-12.0 |
79.0 |
79.0 |
UDH2856 |
6,390 |
1,517 |
4,044 |
45.0 |
-20.0 |
80.0 |
80.0 |
UDH2857 |
6,390 |
1,517 |
4,044 |
49.0 |
-28.0 |
78.0 |
78.0 |
UDH2858 |
6,390 |
1,517 |
4,044 |
39.0 |
-32.0 |
89.0 |
89.0 |
UDH2859 |
6,390 |
1,517 |
4,043 |
31.0 |
-38.5 |
86.8 |
86.8 |
UDH2860 |
6,390 |
1,517 |
4,043 |
35.0 |
-50.0 |
87.0 |
87.0 |
UDH2862 |
6,407 |
1,504 |
4,044 |
14.0 |
-18.0 |
83.9 |
83.9 |
UDH2863 |
6,407 |
1,504 |
4,044 |
25.0 |
-20.0 |
80.9 |
80.9 |
UDH2864 |
6,407 |
1,504 |
4,043 |
18.0 |
-26.0 |
81.0 |
81.0 |
UDH2865 |
6,407 |
1,504 |
4,043 |
38.0 |
-23.0 |
78.0 |
78.0 |
UDH2866 |
6,407 |
1,504 |
4,043 |
29.0 |
-31.0 |
75.0 |
75.0 |
UDH2867 |
6,407 |
1,504 |
4,043 |
40.0 |
-34.5 |
75.0 |
75.0 |
UDH2868 |
6,407 |
1,504 |
4,043 |
35.0 |
-43.0 |
87.0 |
87.0 |
UDH2869 |
6,407 |
1,504 |
4,043 |
28.0 |
-52.5 |
84.0 |
84.0 |
UDH2870 |
6,390 |
1,517 |
4,044 |
31.0 |
-17.0 |
86.9 |
86.9 |
UDH2871 |
6,390 |
1,517 |
4,044 |
29.0 |
-28.0 |
78.0 |
78.0 |
UDH2872 |
6,391 |
1,517 |
4,043 |
19.0 |
-57.0 |
83.0 |
83.0 |
UDH2873 |
6,390 |
1,517 |
4,045 |
48.0 |
7.0 |
101.9 |
101.9 |
UDH2874 |
6,390 |
1,517 |
4,045 |
56.0 |
4.0 |
90.0 |
90.0 |
UDH2877 |
6,390 |
1,517 |
4,044 |
56.0 |
-4.0 |
83.6 |
83.6 |
UDH2878 |
6,390 |
1,517 |
4,044 |
64.0 |
0.0 |
89.9 |
89.9 |
UDH2880 |
6,390 |
1,517 |
4,044 |
49.0 |
-9.0 |
84.0 |
84.0 |
UDH2882 |
6,390 |
1,517 |
4,044 |
60.0 |
-9.0 |
83.0 |
83.0 |
UDH2883 |
6,390 |
1,517 |
4,044 |
55.0 |
-18.0 |
77.0 |
77.0 |
UDH2917 |
6,484 |
1,672 |
4,086 |
234.0 |
5.0 |
69.1 |
69.1 |
UDH2919 |
6,463 |
1,685 |
4,087 |
244.0 |
15.0 |
71.7 |
71.7 |
UDH2920 |
6,463 |
1,685 |
4,086 |
245.0 |
6.0 |
70.7 |
70.7 |
UDH2928 |
6,353 |
1,406 |
4,193 |
100.7 |
-26.3 |
415.7 |
415.7 |
UDH2971 |
6,411 |
1,718 |
4,085 |
256.4 |
17.9 |
83.1 |
83.1 |
UDH2972 |
6,411 |
1,718 |
4,084 |
260.3 |
11.2 |
86.6 |
86.6 |
UDH2973 |
6,410 |
1,719 |
4,084 |
244.7 |
7.8 |
92.9 |
92.9 |
UDH2975 |
6,410 |
1,719 |
4,084 |
249.2 |
5.8 |
89.9 |
89.9 |
UDH2976 |
6,410 |
1,719 |
4,084 |
250.8 |
-3.7 |
126.1 |
126.1 |
UDH2979 |
6,432 |
1,704 |
4,085 |
254.1 |
6.9 |
92.9 |
92.9 |
UDH2981 |
6,432 |
1,703 |
4,085 |
258.0 |
-2.2 |
92.6 |
92.6 |
UDH2983 |
6,442 |
1,697 |
4,086 |
259.5 |
10.1 |
80.6 |
80.6 |
UDH2984 |
6,440 |
1,697 |
4,085 |
250.6 |
-8.1 |
98.9 |
98.9 |
UDH2985 |
6,410 |
1,719 |
4,084 |
229.5 |
5.9 |
100.0 |
100.0 |
UDH2986 |
6,410 |
1,719 |
4,084 |
234.8 |
-4.4 |
108.0 |
108.0 |
UDH2987 |
6,409 |
1,719 |
4,084 |
248.7 |
-7.6 |
104.7 |
104.7 |
UDH2995 |
6,484 |
1,672 |
4,086 |
234.0 |
-2.3 |
83.8 |
83.8 |
UDH3017 |
6,434 |
1,510 |
4,038 |
11.0 |
-44.0 |
50.5 |
50.5 |
UDH3023 |
6,434 |
1,509 |
4,038 |
22.9 |
-58.4 |
50.5 |
50.5 |
UDH3024 |
6,435 |
1,522 |
4,038 |
17.8 |
-19.6 |
48.8 |
48.8 |
UDH3054 |
6,314 |
1,536 |
4,042 |
55.0 |
10.7 |
126.1 |
126.1 |
UDH3055 |
6,314 |
1,536 |
4,042 |
61.1 |
11.3 |
113.5 |
113.5 |
UDH3060 |
6,314 |
1,536 |
4,041 |
54.4 |
-31.5 |
86.8 |
86.8 |
UDH3061 |
6,314 |
1,536 |
4,040 |
62.7 |
-39.5 |
89.0 |
89.0 |
UDH3063 |
6,314 |
1,536 |
4,040 |
58.2 |
-59.9 |
102.0 |
102.0 |
UDH3064 |
6,347 |
1,528 |
4,046 |
55.3 |
-1.1 |
107.5 |
107.5 |
UDH3064A |
6,348 |
1,528 |
4,045 |
55.3 |
-1.1 |
110.2 |
110.2 |
UDH3065 |
6,347 |
1,528 |
4,045 |
59.9 |
-6.5 |
98.5 |
98.5 |
UDH3066 |
6,347 |
1,528 |
4,045 |
52.9 |
-15.9 |
89.6 |
89.6 |
UDH3067 |
6,347 |
1,528 |
4,045 |
69.8 |
-26.5 |
89.7 |
89.7 |
UDH3076 |
6,408 |
1,555 |
4,048 |
75.9 |
11.3 |
62.0 |
62.0 |
UDH3077 |
6,408 |
1,555 |
4,048 |
63.5 |
21.6 |
74.6 |
74.6 |
UDH3101 |
6,331 |
1,532 |
4,044 |
56.0 |
-8.0 |
99.2 |
99.2 |
UDH3102 |
6,331 |
1,532 |
4,044 |
64.0 |
-11.0 |
100.7 |
100.7 |
UDH3103 |
6,331 |
1,532 |
4,044 |
62.0 |
-26.0 |
89.6 |
89.6 |
UDH3104 |
6,331 |
1,532 |
4,043 |
67.0 |
-44.0 |
86.5 |
86.5 |
UDH3105 |
6,331 |
1,532 |
4,043 |
60.0 |
-52.5 |
95.4 |
95.4 |
UDH3106 |
6,331 |
1,532 |
4,043 |
62.5 |
-63.5 |
260.1 |
260.1 |
UDH3107 |
6,310 |
1,537 |
4,042 |
66.0 |
4.0 |
111.0 |
111.0 |
UDH3108 |
6,310 |
1,537 |
4,041 |
65.0 |
-1.0 |
113.7 |
113.7 |
UDH3109 |
6,310 |
1,537 |
4,041 |
75.0 |
-13.0 |
101.9 |
101.9 |
UDH3110 |
6,310 |
1,537 |
4,041 |
70.0 |
-20.5 |
95.9 |
95.9 |
UDH3111 |
6,310 |
1,537 |
4,040 |
73.5 |
-30.5 |
95.8 |
95.8 |
UDH3112 |
6,309 |
1,537 |
4,040 |
86.5 |
-43.5 |
95.7 |
95.7 |
UDH3113 |
6,310 |
1,537 |
4,040 |
77.0 |
-53.0 |
98.5 |
98.5 |
UDH3114 |
6,310 |
1,537 |
4,040 |
72.0 |
-64.0 |
110.1 |
110.1 |
UDH3115 |
6,310 |
1,537 |
4,041 |
82.5 |
-10.0 |
107.8 |
107.8 |
UDH3116 |
6,310 |
1,537 |
4,041 |
85.0 |
-3.0 |
111.2 |
111.2 |
UDH3117 |
6,309 |
1,537 |
4,041 |
78.5 |
-2.0 |
102.2 |
102.2 |
UDH3118 |
6,310 |
1,537 |
4,042 |
74.0 |
4.0 |
113.9 |
113.9 |
UDH3119 |
6,084 |
1,391 |
3,955 |
48.0 |
-26.0 |
266.6 |
266.6 |
UDH3119A |
6,084 |
1,391 |
3,955 |
57.6 |
-19.8 |
209.8 |
209.8 |
UDH3164 |
6,309 |
1,537 |
4,041 |
90.5 |
2.5 |
119.5 |
119.5 |
UDH3165 |
6,309 |
1,538 |
4,041 |
90.0 |
-8.0 |
111.5 |
111.5 |
UDH3166 |
6,310 |
1,537 |
4,041 |
81.0 |
-24.0 |
96.0 |
96.0 |
UDH3171 |
6,373 |
1,519 |
4,044 |
347.0 |
-48.0 |
95.7 |
95.7 |
UDH3172 |
6,372 |
1,520 |
4,044 |
15.7 |
-50.1 |
116.8 |
116.8 |
UDH3174 |
6,372 |
1,520 |
4,044 |
25.0 |
-54.0 |
95.7 |
95.7 |
UDH3176A |
6,371 |
1,520 |
4,044 |
66.0 |
-84.0 |
102.0 |
102.0 |
UDH3177 |
6,369 |
1,521 |
4,044 |
122.0 |
-83.0 |
105.0 |
105.0 |
UDH3178 |
6,369 |
1,521 |
4,044 |
111.0 |
-72.0 |
102.0 |
102.0 |
UDH3180 |
6,400 |
1,396 |
4,054 |
98.0 |
-40.0 |
170.5 |
170.5 |
UDH3184A |
6,400 |
1,396 |
4,054 |
86.5 |
-36.0 |
194.2 |
194.2 |
UDH3186 |
6,396 |
1,395 |
4,055 |
77.0 |
-41.0 |
205.1 |
205.1 |
UDH3188 |
6,401 |
1,396 |
4,054 |
70.0 |
-32.0 |
196.2 |
196.2 |
Underground Diamond Drilling outside of Swan Mineral
Reserves |
UDE175A |
5,553 |
1,446 |
4,447 |
90.8 |
-84.9 |
1,071.0 |
422.9 |
UDE181A |
5,681 |
1,403 |
4,428 |
92.8 |
-79.7 |
1,140.0 |
769.0 |
UDE184 |
5,831 |
1,350 |
4,404 |
100.5 |
-74.3 |
1,142.8 |
1,142.8 |
UDE184A |
5,831 |
1,350 |
4,404 |
100.5 |
-74.3 |
1,038.0 |
587.1 |
UDE184B |
5,831 |
1,350 |
4,404 |
100.5 |
-74.3 |
813.0 |
521.6 |
UDE184C |
5,831 |
1,350 |
4,404 |
100.5 |
-74.3 |
782.0 |
25.0 |
UDE185A |
5,830 |
1,350 |
4,404 |
104.9 |
-79.2 |
1,105.3 |
616.2 |
UDE195 |
6,174 |
1,854 |
4,246 |
240.8 |
-71.4 |
670.0 |
670.0 |
UDE199 |
5,956 |
1,306 |
4,383 |
105.1 |
-71.3 |
1,011.5 |
1,011.5 |
UDE200 |
5,956 |
1,306 |
4,383 |
102.9 |
-68.4 |
987.0 |
987.0 |
UDE200A |
5,956 |
1,306 |
4,383 |
102.9 |
-68.4 |
761.9 |
86.1 |
UDE201 |
5,956 |
1,306 |
4,383 |
109.4 |
-78.9 |
1,128.1 |
1,128.1 |
UDE203 |
6,081 |
1,288 |
4,362 |
90.9 |
-58.5 |
836.8 |
836.8 |
UDE204 |
6,081 |
1,288 |
4,362 |
94.4 |
-61.4 |
846.0 |
846.0 |
UDE205 |
6,082 |
1,285 |
4,362 |
98.0 |
-66.2 |
852.1 |
852.1 |
UDE206 |
6,082 |
1,285 |
4,362 |
99.4 |
-71.2 |
861.1 |
861.1 |
UDE207 |
6,081 |
1,286 |
4,362 |
102.0 |
-78.5 |
1,106.1 |
1,106.1 |
UDE208 |
5,956 |
1,311 |
4,383 |
83.7 |
-65.0 |
900.0 |
900.0 |
UDE209 |
5,956 |
1,306 |
4,383 |
88.2 |
-67.5 |
903.0 |
903.0 |
UDE210 |
5,956 |
1,306 |
4,383 |
86.5 |
-70.7 |
951.2 |
951.2 |
UDE211 |
5,956 |
1,306 |
4,383 |
84.0 |
-75.2 |
1,004.7 |
1,004.7 |
UDE212A |
5,553 |
1,446 |
4,447 |
93.9 |
-84.3 |
1,113.0 |
147.0 |
UDE243 |
5,830 |
1,355 |
4,404 |
77.6 |
-45.1 |
677.6 |
677.6 |
UDE245 |
6,559 |
1,482 |
4,046 |
95.5 |
-21.3 |
330.0 |
330.0 |
UDE246 |
6,559 |
1,482 |
4,045 |
103.9 |
-35.7 |
350.9 |
350.9 |
UDE247 |
6,560 |
1,482 |
4,045 |
103.7 |
-48.0 |
356.9 |
356.9 |
UDE248 |
6,560 |
1,482 |
4,045 |
104.1 |
-61.3 |
686.6 |
686.6 |
UDE249 |
6,582 |
1,471 |
4,046 |
118.2 |
-67.0 |
452.9 |
452.9 |
UDE250 |
6,582 |
1,471 |
4,046 |
126.9 |
-74.4 |
502.4 |
502.4 |
UDE258 |
6,802 |
1,442 |
4,170 |
109.2 |
-36.1 |
317.9 |
317.9 |
UDE259 |
6,802 |
1,442 |
4,169 |
111.6 |
-46.5 |
447.0 |
447.0 |
UDE260 |
6,802 |
1,442 |
4,169 |
110.9 |
-54.3 |
456.3 |
456.3 |
UDE261 |
6,802 |
1,442 |
4,169 |
113.0 |
-64.2 |
445.0 |
445.0 |
UDE262 |
6,802 |
1,442 |
4,169 |
107.5 |
-59.6 |
443.7 |
443.7 |
UDE263 |
6,801 |
1,441 |
4,169 |
119.8 |
-70.6 |
551.9 |
551.9 |
UDE265 |
6,081 |
1,288 |
4,362 |
89.2 |
-54.9 |
905.7 |
905.7 |
UDE280 |
6,583 |
1,471 |
4,046 |
64.3 |
-67.1 |
494.9 |
494.9 |
UDE282 |
6,801 |
1,442 |
4,170 |
128.2 |
-34.0 |
416.9 |
416.9 |
UDE282A |
6,801 |
1,442 |
4,170 |
128.2 |
-34.0 |
377.6 |
42.7 |
UDH2482 |
6,234 |
1,339 |
4,194 |
100.0 |
-27.0 |
428.9 |
428.9 |
UDH2489 |
6,226 |
1,341 |
4,195 |
101.0 |
-49.0 |
411.0 |
411.0 |
UDH2831 |
6,354 |
1,406 |
4,193 |
73.0 |
-29.4 |
396.0 |
396.0 |
UDH2886 |
6,444 |
1,317 |
4,060 |
99.7 |
-20.8 |
424.8 |
424.8 |
UDH2887 |
6,444 |
1,317 |
4,060 |
95.8 |
-40.0 |
501.0 |
501.0 |
UDH2931 |
6,463 |
1,690 |
4,085 |
13.9 |
-84.5 |
119.9 |
119.9 |
UDH2932 |
6,464 |
1,691 |
4,085 |
86.4 |
-41.5 |
74.6 |
74.6 |
UDH2933 |
6,463 |
1,690 |
4,085 |
123.0 |
-67.9 |
113.7 |
113.7 |
UDH2989 |
6,502 |
1,656 |
4,086 |
235.1 |
-6.3 |
92.9 |
92.9 |
UDH3068 |
6,347 |
1,528 |
4,044 |
52.5 |
-34.0 |
236.4 |
236.4 |
UDH3094 |
6,227 |
1,341 |
4,195 |
88.0 |
-26.0 |
492.1 |
492.1 |
UDH3120 |
6,083 |
1,391 |
3,955 |
56.5 |
-25.7 |
248.0 |
248.0 |
UDH3122 |
6,083 |
1,391 |
3,955 |
61.2 |
-33.1 |
368.9 |
368.9 |
UDH3123 |
6,084 |
1,391 |
3,955 |
44.5 |
-29.2 |
257.9 |
257.9 |
UDH3124 |
6,083 |
1,391 |
3,955 |
58.0 |
-41.0 |
260.6 |
260.6 |
UDH3126 |
6,046 |
1,366 |
3,949 |
66.1 |
-18.5 |
286.2 |
286.2 |
UDH3127 |
6,046 |
1,366 |
3,949 |
65.0 |
-22.8 |
281.6 |
281.6 |
UDH3128 |
6,046 |
1,366 |
3,949 |
58.6 |
-33.5 |
269.3 |
269.3 |
UDH3129 |
6,046 |
1,366 |
3,949 |
66.0 |
-33.5 |
253.9 |
253.9 |
UDH3130 |
6,046 |
1,366 |
3,948 |
65.3 |
-38.3 |
254.2 |
254.2 |
UDH3131 |
6,046 |
1,365 |
3,949 |
64.3 |
-12.9 |
290.1 |
290.1 |
UDH3132 |
6,046 |
1,366 |
3,949 |
70.0 |
-14.6 |
295.0 |
295.0 |
UDH3133A |
6,046 |
1,366 |
3,950 |
70.0 |
-9.0 |
314.6 |
314.6 |
UDH3134 |
6,046 |
1,366 |
3,950 |
64.9 |
-8.0 |
320.3 |
320.3 |
UDH3135 |
6,014 |
1,373 |
3,944 |
62.1 |
-23.3 |
283.0 |
283.0 |
UDH3136 |
6,014 |
1,373 |
3,944 |
69.4 |
-23.9 |
280.4 |
280.4 |
UDH3137 |
6,014 |
1,372 |
3,944 |
57.9 |
-25.4 |
278.7 |
278.7 |
UDH3138 |
6,014 |
1,373 |
3,943 |
66.6 |
-27.8 |
257.8 |
257.8 |
UDH3139 |
6,014 |
1,373 |
3,943 |
67.1 |
-32.9 |
277.2 |
277.2 |
UDH3140 |
6,014 |
1,373 |
3,943 |
61.5 |
-37.4 |
257.5 |
257.5 |
UDH3141 |
6,014 |
1,373 |
3,943 |
64.2 |
-41.9 |
251.5 |
251.5 |
UDH3142 |
6,014 |
1,373 |
3,944 |
64.7 |
-19.9 |
284.6 |
284.6 |
UDH3143 |
6,014 |
1,373 |
3,944 |
69.0 |
-15.0 |
299.6 |
299.6 |
UDH3145 |
5,992 |
1,395 |
3,940 |
65.1 |
-29.6 |
269.7 |
269.7 |
UDH3146 |
5,991 |
1,395 |
3,940 |
73.0 |
-30.6 |
270.0 |
270.0 |
UDH3148 |
5,991 |
1,395 |
3,940 |
68.3 |
-36.0 |
257.0 |
257.0 |
UDH3148A |
5,991 |
1,395 |
3,940 |
74.0 |
-31.1 |
240.0 |
54.3 |
UDH3149 |
5,991 |
1,395 |
3,940 |
77.2 |
-35.1 |
270.0 |
270.0 |
UDH3149A |
5,991 |
1,395 |
3,940 |
72.0 |
-40.0 |
275.8 |
275.8 |
UDH3150 |
5,992 |
1,395 |
3,939 |
61.0 |
-39.8 |
257.7 |
257.7 |
UDH3151 |
5,991 |
1,395 |
3,939 |
68.0 |
-43.0 |
257.8 |
257.8 |
UDH3153 |
5,992 |
1,394 |
3,939 |
62.0 |
-47.0 |
254.7 |
254.7 |
UDH3154 |
5,991 |
1,395 |
3,939 |
74.0 |
-48.0 |
260.5 |
260.5 |
UDH3156 |
5,991 |
1,395 |
3,940 |
68.0 |
-23.5 |
279.0 |
279.0 |
UDH3163 |
6,801 |
1,442 |
4,169 |
123.1 |
-59.0 |
391.5 |
391.5 |
UDH3179 |
6,400 |
1,396 |
4,054 |
92.7 |
-47.9 |
224.4 |
224.4 |
UDH3182 |
6,395 |
1,395 |
4,055 |
80.0 |
-41.0 |
203.9 |
203.9 |
UDH3183 |
6,401 |
1,396 |
4,054 |
80.0 |
-48.0 |
149.4 |
149.4 |
UDH3203 |
6,803 |
1,443 |
4,169 |
123.0 |
-51.0 |
366.1 |
366.1 |
UDH3228 |
6,014 |
1,373 |
3,943 |
63.0 |
-29.0 |
278.4 |
278.4 |
Kirkland Lake Gold (TSX:KL)
Historical Stock Chart
From Aug 2024 to Sep 2024
Kirkland Lake Gold (TSX:KL)
Historical Stock Chart
From Sep 2023 to Sep 2024