UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D. C. 20549
FORM 10-K
x
|
ANNUAL REPORT PURSUANT TO SECTION 13 or 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
|
For the fiscal year ended June 30, 2010
OR
¨
|
TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
|
For the transition period from
to
Commission File No. 1-4982
PARKER-HANNIFIN CORPORATION
(Exact name of registrant as specified in its charter)
|
|
|
Ohio
|
|
34-0451060
|
(State or other jurisdiction of
Incorporation or Organization)
|
|
(I.R.S. Employer
Identification No.)
|
|
|
6035 Parkland Boulevard, Cleveland, Ohio
|
|
44124-4141
|
(Address of Principal Executive Offices)
|
|
(Zip Code)
|
Registrants telephone number, including area code (216) 896-3000
Securities registered pursuant to Section 12(b) of the Act:
|
|
|
Title of Each Class
|
|
Name of Each Exchange
on which Registered
|
Common Shares, $.50 par value
|
|
New York Stock Exchange
|
Securities registered pursuant to Section 12(g) of the Act: None
Indicate by check mark if the Registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities
Act. Yes
x
No
¨
Indicate by check mark if the Registrant is not required to file reports pursuant to
Section 13 or Section 15(d) of the Act. Yes
¨
No
x
Indicate by check mark whether the Registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the
Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the Registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90
days. Yes
x
No.
¨
Indicate by check mark whether the Registrant has submitted electronically and posted on its corporate website, if any, every Interactive
Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the Registrant was required to submit and post such
files). Yes
x
No
¨
Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K (§229.405 of this chapter) is
not contained herein, and will not be contained, to the best of Registrants knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form
10-K
¨
.
Indicate by check mark whether the Registrant is a large
accelerated filer, an accelerated filer, a non-accelerated filer or a smaller reporting company. See the definitions of large accelerated filer, accelerated filer and smaller reporting company in Rule 12b-2 of the
Exchange Act.
|
|
|
|
|
|
|
|
|
Large Accelerated Filer:
|
|
x
|
|
|
|
Accelerated Filer:
|
|
¨
|
|
|
|
|
|
Non-Accelerated Filer:
|
|
¨
|
|
|
|
Smaller Reporting Company:
|
|
¨
|
(Do not check if a smaller reporting company)
|
|
|
|
|
Indicate by check mark whether the Registrant is a shell company (as defined in Rule 12b-2 of the
Exchange Act). Yes
¨
No
x
The aggregate market value of the outstanding common stock held by non-affiliates of the Registrant as of December 31, 2009,
excluding, for purpose of this computation only, stock holdings of the Registrants Directors and Officers: $8,592,027,160.
The number of Common Shares outstanding on July 31, 2010 was 161,176,153.
DOCUMENTS INCORPORATED BY REFERENCE
Portions of the following documents are incorporated by reference:
|
(1)
|
Annual Report to Shareholders of the Company for the fiscal year ended June 30, 2010 is incorporated by reference into Parts I and II hereof.
|
|
(2)
|
Definitive Proxy Statement for the Companys 2010 Annual Meeting of Shareholders to be held on October 27, 2010 is incorporated by reference into Part III
hereof.
|
PARKER-HANNIFIN CORPORATION
FORM 10-K
Fiscal Year Ended June 30, 2010
PART I
ITEM 1
.
Business
.
Parker-Hannifin Corporation is a leading worldwide full-line diversified manufacturer of
motion and control technologies and systems, including fluid power systems, electromechanical controls and related components. Fluid power involves the transfer and control of power through the medium of liquid, gas or air, in hydraulic, pneumatic
and vacuum applications. Fluid power systems move and position materials, control machines, vehicles and equipment and improve industrial efficiency and productivity. Components of a simple fluid power system include one or more pumps which generate
pressure, one or more valves which control the flow of the fluid, one or more actuators which translate the pressure from the fluid into mechanical energy, one or more filters to ensure proper fluid condition and numerous hoses, couplings, fittings
and seals. Electromechanical controls involve the use of electronic components and systems to control motion and precisely locate or vary speed in automation and aerospace applications. In addition to motion and control products, the Company also is
a leading worldwide producer of fluid purification, fluid and fuel control, process instrumentation, air conditioning, refrigeration, electromagnetic shielding and thermal management products and systems.
The Company was incorporated in Ohio in 1938. Its principal executive offices are located at 6035 Parkland Boulevard, Cleveland, Ohio
44124-4141, telephone (216) 896-3000. As used in this Annual Report on Form 10-K, unless the context otherwise requires, the term Company or Parker refers to Parker-Hannifin Corporation and its subsidiaries.
The Companys investor relations internet website address is
www.phstock.com
. The Company makes available free of charge on
or through its website its annual report on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K, and any amendments to those reports filed or furnished pursuant to Section 13(a) or 15(d) of the Securities Exchange Act of
1934, as soon as reasonably practicable after filing or furnishing such material electronically with the Securities and Exchange Commission. The information contained on or accessible through the Companys website is not part of this Annual
Report on Form 10-K.
The Board of Directors has adopted a written charter for each of the committees of the Board of
Directors. These charters, as well as the Companys Code of Conduct, Board of Directors Guidelines on Significant Corporate Governance Issues and Independence Standards for Directors, are posted and available on the Companys investor
relations internet website at
www.phstock.com
under the Corporate Governance page. Shareholders may request copies of these corporate governance documents, free of charge, by writing to Parker-Hannifin Corporation, 6035 Parkland Boulevard,
Cleveland, Ohio 44124-4141, Attention: Secretary, or by calling (216) 896-3000.
- 1 -
The Companys manufacturing, service, distribution and administrative facilities are
located in 39 states and in 45 foreign countries. The Companys motion and control technologies and systems are used in the products of its three principal business segments: Industrial; Aerospace; and Climate & Industrial Controls.
The products are sold as original and replacement equipment through product and distribution centers worldwide. The Company markets its products through direct-sales employees, independent distributors, sales representatives and builder/dealers.
Parker products are supplied to approximately 471,000 customers in virtually every significant manufacturing, transportation and processing industry. For the fiscal year ended June 30, 2010, total net sales were $9,993,165,773. Industrial
Segment products accounted for 74%, Aerospace Segment products accounted for 18%, and Climate & Industrial Controls Segment products accounted for 8% of those net sales.
Markets
Motion
and control technologies and systems are used throughout various industries and in various applications. The approximately 471,000 customers who purchase the Companys products are found throughout virtually every significant manufacturing,
transportation and processing industry. No single customer accounted for more than 3% of the Companys total net sales for the fiscal year ended June 30, 2010.
Industrial Segment
.
Sales of Industrial Segment products are made primarily to original equipment manufacturers and their
replacement markets in all major manufacturing, transportation and processing industries. The major markets for products of the Industrial Segment are listed below by Group:
|
|
|
|
|
Automation
Group:
|
|
Alternative energy
Converting and
packaging
Factory automation
Food
production machinery
Life sciences and medical
Material
handling
Paper machinery
|
|
Primary metals
Robotics
Safety and
security
Semiconductor and electronics
Transportation
and mobile
|
|
|
|
Filtration
Group:
|
|
Food and beverage
Industrial
machinery
Life sciences
Marine
Mobile
equipment
|
|
Oil and gas
Power
generation
Process
Transportation
Water
|
|
|
|
Fluid
Connectors
Group:
|
|
Aerial lift
Agriculture
Bulk chemical handling
Construction
Machinery
Food and beverage
Fuel and gas
delivery
Industrial machinery
|
|
Life sciences
Marine
Mining
Mobile
Oil and gas
Renewable energy
Transportation
|
- 2 -
|
|
|
|
|
|
|
|
Hydraulics
Group:
|
|
Aerial lift
Agriculture
Construction machinery
Forestry
Industrial
machinery
Machine tool
Material
handling
|
|
Marine
Mining
Oil and gas
Power generation
Renewable
energy
Truck hydraulics
Factory
automation
|
|
|
|
Instrumentation
Group:
|
|
Chemical and refining
Food and
beverage
Medical and dental
|
|
Microelectronics
Oil and gas
Power generation
|
|
|
|
Seal Group:
|
|
Aerospace
Chemical
processing
Consumer
Energy, oil
and gas
Fluid power
General
industrial
|
|
Information technology
Life sciences
Military
Semiconductor
Telecommunications
Transportation
|
Aerospace Segment
.
Sales of Aerospace Segment products are made primarily in the commercial
and military aerospace markets to both original equipment manufacturers and to end users for spares, maintenance, repair and overhaul. The major markets for products of the Aerospace Segment are listed below:
|
|
|
Commercial transports
Engines
General and
business aviation
Helicopters
Launch
vehicles
Military aircraft
|
|
Missiles
Power
generation
Regional transports
Unmanned
aerial vehicles
Aftermarket services
|
Climate & Industrial Controls Segment
.
Sales of Climate & Industrial Controls Segment products are made
primarily to original equipment manufacturers and their replacement markets. The major markets for products of the Climate & Industrial Controls Segment are listed below:
|
|
|
Agriculture
Air
conditioning
Appliances
Food and
beverage
Industrial and commercial refrigeration
Industrial
machinery
|
|
Oil and gas
Life sciences
and medical
Precision cooling
Process
Supermarkets
Transportation
|
- 3 -
Principal Products and Methods of Distribution
Industrial Segment
.
The products produced by the Companys Industrial Segment consist of a broad range of motion and
control technologies and systems, which are described below by Group:
Automation Group
: pneumatic and
electromechanical components and systems, including:
|
|
|
Pneumatic products:
|
|
Air preparation units
Pneumatic
accessories
Pneumatic actuators and grippers
Pneumatic valves and
controls
Structural extrusions
Vacuum generators,
cups and sensors
|
|
|
Electromechanical products:
|
|
AC/DC drives and systems
Electric actuators,
gantry robots and slides
Human-machine interfaces
Manifolds
Rotary actuators
Stepper
motors, servo motors, drives and controls
|
Filtration Group
: filters, systems and instruments to
monitor and remove contaminants from fuel, air, oil, water and other liquids and gases, including:
|
|
|
Analytical gas generators
Compressed air and
gas filters and dryers
Condition monitoring devices
Engine air, fuel and
oil filtration and systems
Hydraulic, lubrication and coolant filters
|
|
Nitrogen, hydrogen and zero air generators
Process, chemical,
water and microfiltration filters
Water desalinization and purification
|
Fluid Connectors Group
: connectors which control, transmit and contain fluid, including:
|
|
|
Connectors for low pressure fluid conveyance
Deep sea umbilicals
Diagnostic equipment
Hose
couplings
Industrial hose
Mooring systems and
power cables
|
|
PTFE hose and tubing
Quick
couplings
Check valves
Rubber and
thermoplastic hose
Tube fittings and adapters
Tubing and plastic
fittings
|
- 4 -
Hydraulics Group
: hydraulic components and systems for builders and users of
industrial and mobile machinery and equipment, including:
|
|
|
Accumulators
Cartridge valves
Human
machine interfaces
Hydraulic transmissions
Hydraulic cylinders
Hydraulic motors and pumps
Hydraulic systems
|
|
Hydraulic valves and controls
Hydrostatic steering
units
Integrated hydraulic circuits
Power take-off
equipment
Power units
Rotary actuators
Sensors
|
Instrumentation Group
: high quality critical flow components for process instrumentation, healthcare
and ultra-high-purity applications, including:
|
|
|
Analytical sample conditioning products and systems
Chemical injection
fittings and valves
Fluoropolymer chemical delivery fittings, valves and pumps
High-purity gas
delivery fittings, valves, regulators and digital flow controllers
|
|
Process control fittings, valves, regulators and manifold
valves
Process control double block and bleeds
Permanent no-weld
tube fittings
Precision industrial regulators and flow controllers
Industrial mass flow
meters/controllers
|
Seal Group
: static and dynamic sealing devices, including:
|
|
|
Dynamic seals
Elastomeric o-rings
Electromagnetic interference shielding
Extruded and
precision-cut fabricated elastomeric seals
High-temperature metal seals
|
|
Homogeneous and inserted elastomeric shapes
Medical
devices
Medical seals and instruments
Metal and plastic
retained composite seals
Thermal management products
|
Industrial Segment products include standard products, as well as custom products which are engineered and produced to original equipment
manufacturers specifications for application to a particular end product. Both standard and custom products are also used in the replacement of original motion and control products. Industrial Segment products are marketed primarily through
field sales employees and approximately 10,300 independent distributor locations throughout the world.
Aerospace
Segment
.
The principal products of the Companys Aerospace Segment include flight control, hydraulic, fuel, fluid conveyance, and engine systems and components used on commercial and military airframe and engine programs.
- 5 -
The Aerospace Segment offers primary and secondary flight control systems and components,
including:
|
|
|
hydraulic, electrohydraulic, electric backup hydraulic, electrohydrostatic, and electromechanical components used for precise control of aircraft
rudders, elevators, ailerons and other aerodynamic control surfaces.
|
The Aerospace Segment also offers
complete hydraulic systems and components, including:
|
|
|
Engine-driven pumps
Motor
pumps
Power transfer units
Hydraulic power
packs
Reservoirs
Filtration manifolds
Selector
valves
Electrohydraulic servo valves
|
|
Thrust-reverser systems
Utility actuators
Accumulators
Electronic
controllers and software
Integration packages
Automatic bleed
valves
|
The Aerospace Segment also designs and manufactures aircraft wheels, brakes and associated hydraulics
components for general aviation, rotorcraft and military markets.
The Aerospace Segments fuel product line offers
complete fuel systems and components, including:
|
|
|
Fuel tank inerting systems
Refuel, transfer,
and pressurization controls
In-flight refueling systems
Fuel pumps and
valves
Fuel measurement and management systems
Fuel and pneumatic
filtration
Fluid conveyance equipment
|
|
Center of gravity controls
Engine fuel
injection atomization nozzles, manifolds and augmentor controls
Electronic monitoring computers and controllers
Lightning-safe flame
arresters, fuel caps, and adapters
Water and waste subsystems
|
The Aerospace Segment offers fluid conveyance systems and components, including:
|
|
|
Rubber, metal, and PTFE hose assemblies
|
|
|
|
Couplings, quick disconnects, fittings, joints, and unions
|
- 6 -
The Aerospace Segment also produces various engine systems and components, including:
|
|
|
Pneumatic subsystems
Low-pressure
pneumatic controls
Engine starter systems
Fuel valves and
manifolds
Oil and lubrication pumps and equipment
Heat
management
Engine bleed control and anti-ice systems
|
|
Electronic control and monitoring computers
Motor-driven and
hydraulic pumps
Fuel and pneumatic filtration
Fluid conveyance
systems and engine build units
Thrust reverser actuation
|
The Aerospace Segment also offers electronics thermal management heat rejection systems and single-phase and two-phase heat collection
systems for radar, ISAR, and power electronics.
Aerospace Segment products are marketed by the Companys regional sales
organization and are sold directly to manufacturers and end users throughout the world.
Climate & Industrial
Controls Segment
.
The principal products of the Companys Climate & Industrial Controls Segment consist of systems and components for use primarily in the mobile and stationary refrigeration and air conditioning industry, and
systems and components for use in fluid control applications in a wide variety of industries including processing, fuel dispensing, beverage dispensing and mobile emissions. These products include:
|
|
|
Accumulators
CO
2
controls
Electronic
controllers
Filter driers
Hand shut-off valves
Heat
exchangers
|
|
Hose and fittings
Pressure regulating
valves
Refrigerant distributors
Safety relief valves
Solenoid
valves
Thermostatic expansion valves
|
Climate & Industrial Controls Segment products are marketed primarily through field sales employees and independent distributors
and wholesalers throughout the world.
No single product contributed more than 1% to the Companys total net sales for
the fiscal year ended June 30, 2010.
Competition
The Companys business operates in highly competitive markets and industries. The Company offers hundreds of thousands of individual
products over numerous, varied markets through its 132 reporting units operating in 46 countries and consequently has thousands of competitors when viewed across the various markets and product offerings. The Companys competitors include many
large U.S. and non-U.S. companies, divisions of larger companies, and smaller regional or specialized companies. The degree of competition varies globally and regionally by product line, end market and geographic location. While each of the
Companys segments has several global competitors and numerous regional and specialized local ones, given the Companys market and product breadth, no single competitor competes with the Company with respect to all products manufactured
and sold by the Company.
- 7 -
In the Industrial Segment, the Company competes on the basis of product quality and
innovation, customer service, manufacturing and distribution capability, and price competitiveness. The Company believes that it is one of the market leaders in most of the major markets for its most significant Industrial Segment products. While
the Companys primary global competitors include SMC Corporation, Freudenberg-NOK, Festo AG, Bosch Rexroth AG, Swagelok Company, Pall Corporation, Donaldson Company, Inc. and Eaton Corporation, none of these companies compete with every Group
and every product line that make up the Companys Industrial Segment.
In the Aerospace Segment, the Company has
developed alliances with key customers based on the Companys advanced technological and engineering capabilities, superior performance in quality, delivery, and service, and price competitiveness, which has enabled the Company to obtain
significant original equipment business on new aircraft programs for its systems and components and to thereby obtain the follow-on repair and replacement business for these programs. Although the Company believes that it is one of the market
leaders in most of the major markets for its most significant Aerospace Segment products, the Companys primary global competitors for the most significant Aerospace Segment products include Honeywell Inc., Goodrich Corporation, Hamilton
Sundstrand (a subsidiary of United Technologies Corp.), GE Aviation (formerly Smiths Aerospace), Eaton Corporation, Moog Inc., Woodwood Governor Company and Zodiac Aerospace SA.
In the Climate & Industrial Controls Segment, the Company competes on the basis of product quality and innovation, customer
service, manufacturing and distribution capability, and price competitiveness. Although the Company believes that it is one of the market leaders in most of the major markets for its most significant Climate & Industrial Controls Segment
products, the Companys primary global competitors for the most significant Climate & Industrial Controls segment products include Danfoss A/S, Emerson Climate Technologies, Emerson/ASCO, Hutchinson SA, TI Automotive Ltd. and Visteon
Corporation.
The Company believes that its platform utilizing nine core technologies which include aerospace,
electromechanical, filtration, fluid handling, hydraulics, pneumatics, process control, refrigeration, and sealing and shielding is a positive factor in its ability to compete effectively with both large and small competitors. For each of its
segments, the Company believes that the following factors also contribute to its ability to compete effectively:
|
|
|
decentralized operating structure that allows each division to focus on its customers and respond quickly at the local level;
|
|
|
|
system solution capabilities that use the Companys core technologies from a variety of its segments; and
|
Research and Product Development
The Company continually researches the feasibility of new products and services through its development laboratories and testing
facilities in many of its worldwide manufacturing locations. Its research and product development staff includes chemists, physicists, and mechanical, chemical and electrical engineers.
- 8 -
Total research and development costs relating to the development of new products and
services and the improvement of existing products and services amounted to $316,181,141 in fiscal year 2010, $338,907,820 in fiscal year 2009, and $303,097,752 in fiscal year 2008. These amounts include costs incurred by the Company related to
independent research and development initiatives as well as costs incurred in connection with research and development contracts. Costs incurred in connection with research and development contracts and included in the total research and development
costs reported above for each of the respective fiscal years 2010, 2009, and 2008 were $40,276,911, $50,739,381, and $47,757,134, respectively.
Patents, Trademarks, Licenses
The Company owns a number of patents, trademarks and licenses related to its products and has exclusive and non-exclusive rights to use a
number of patents owned by others. In addition, patent applications on certain products are now pending, although there can be no assurance that patents will be issued. The Company is not dependent to any material extent on any single patent or
group of patents.
Backlog and Seasonal Nature of Business
The Companys backlog by business segment for the past two fiscal years, as set forth on pages 13-5 to 13-7 of Exhibit 13 to this
Annual Report on Form 10-K, is incorporated into this section by reference. The Companys backlog at June 30, 2010 was $3,141,244,079 and at June 30, 2009 was $2,885,284,015. Approximately 85% of the Companys backlog at
June 30, 2010 is scheduled for delivery in the succeeding twelve months. The Companys business generally is not seasonal in nature.
Environmental Regulation
The Companys operations necessitate the use and handling of hazardous materials and, as a result, the Company is subject to United
States federal, state, and local laws and regulations as well as foreign laws designed to protect the environment and to regulate the discharge of materials into the environment. These laws impose penalties, fines and other sanctions for
non-compliance and liability for response costs, property damage and personal injury resulting from past and current spills, disposals or other releases of, or exposures to, hazardous materials. Among other environmental laws, the Company is subject
to the United States federal Superfund law, under which the Company has been designated as a potentially responsible party and may be liable for cleanup costs associated with various waste sites, some of which are on the
United States Environmental Protection Agencys Superfund priority list.
As of June 30, 2010, the Company is
involved in environmental remediation at various United States and foreign manufacturing facilities presently or formerly operated by the Company and has been named as a potentially responsible party, along with other companies, at
off-site waste disposal facilities and regional sites.
The Company believes that its policies, practices and procedures are
properly designed to prevent unreasonable risk of environmental damage and the consequent financial liability to the Company. Compliance with environmental laws and regulations requires continuing management of efforts and expenditures by the
Company. Compliance with environmental laws and regulations has not had in the past, and, the Company believes, will not have in the future, a material adverse effect on the capital expenditures, earnings, or competitive position of the Company.
- 9 -
As of June 30, 2010, the Company had a reserve of $15,825,492 for environmental matters
which are probable and reasonably estimable. This reserve is recorded based upon the best estimate of costs to be incurred in light of the progress made in determining the magnitude of remediation costs, the timing and extent of remedial actions
required by governmental authorities and the amount of the Companys liability in proportion to other responsible parties.
The Companys estimated total liability for the above mentioned sites ranges from a minimum of $15,825,492 to a maximum of
$72,342,781. The largest range of the estimated total liability for any one site is approximately $6,100,000. The actual costs to be incurred by the Company will be dependent on final determination of contamination, final determination of remedial
action required, negotiations with federal and state agencies with respect to cleanup levels, changes in regulatory requirements, innovations in investigatory and remedial technologies, effectiveness of remedial technologies employed, the ability of
the other responsible parties to pay, and any insurance or third-party recoveries.
Energy Matters and Sources and Availability of Raw
Materials
The Companys primary energy source for each of its business segments is electric power. While the
Company cannot predict future costs of such electric power, the primary source for production of the required electric power will be coal from substantial, proven coal reserves available to electric utilities. The Company is subject to governmental
regulations in regard to energy supplies in the United States and elsewhere. To date, the Company has not experienced any significant disruptions of its operations due to energy curtailments.
Steel, brass, aluminum, elastomeric and thermoplastic materials and chemicals are the principal raw materials used by the Company. These
materials are available from numerous sources in quantities sufficient to meet the requirements of the Company.
Employees
The Company employed approximately 54,800 persons as of June 30, 2010, of whom approximately 28,900 were employed
by foreign subsidiaries.
Business Segment Information
The Companys net sales, segment operating income and assets by business segment and net sales and long-lived assets by geographic
area for the past three fiscal years, as set forth on pages 13-15 to 13-16 of Exhibit 13 to this Annual Report on Form 10-K, are incorporated into this section by reference.
- 10 -
Acquisitions
During fiscal year 2010, the Company completed one acquisition, as set forth on page 13-22 of Exhibit 13 to this Annual Report on Form
10-K, which is incorporated into this section by reference.
ITEM 1A. Risk Factors
.
The following risk factors identify what the Company believes to be all of the risks that could materially and adversely
affect the Companys business, financial condition, results of operations and cash flows. These risk factors should be considered and evaluated together with information incorporated by reference or otherwise included elsewhere in this Annual
Report on Form 10-K. Additional risks not currently known to the Company or that the Company currently believes are immaterial also may impair the Companys business, financial condition, results of operations and cash flows.
The Company is subject to risks arising from uncertainty in worldwide economic conditions.
Current uncertainty regarding global economic conditions and the existence and rate of any economic recovery may have an adverse effect on
the business, results of operations and financial condition of the Company and its distributors, customers and suppliers, and on the general economic activity in many of the industries and markets in which the Company and its distributors, customers
and suppliers operate. Among the economic factors which may affect performance are: manufacturing activity, air travel trends, currency exchange rates, difficulties entering new markets and general economic conditions such as inflation, deflation,
interest rates and credit availability. These effects may, among other things, negatively impact the level of purchases, capital expenditures and creditworthiness of the Companys distributors, customers and suppliers, and, therefore, the
Companys revenues, operating profits and margins and order rates.
During the second half of fiscal 2010, the Company
began to see signs of an economic recovery. Throughout the worldwide economic downturn, the Company focused on maintaining its financial strength by adjusting its cost structure to reflect changing demand levels, maintaining a strong balance sheet
and managing its cash. The Companys Win Strategy initiatives relating to growth and margin improvement as well as the implementation of a number of business realignment initiatives, including plant closures and general workforce reductions,
continue to help meet this objective. There can be no assurance, however, that these or any other initiatives or contingency plans implemented by the Company will be successful or that the Company will have sufficient resources to manage the
recovery if the economy rebounds more quickly than anticipated.
The Company cannot predict if, when or how much worldwide
economic conditions will improve. These conditions are highly unpredictable and beyond the Companys control. If these conditions deteriorate, however, the Companys business, results of operations and financial condition could be
materially adversely affected.
- 11 -
The Company is subject to risks relating to its information technology systems.
The Company relies extensively on information technology systems to manage and operate its business. If these systems are damaged or cease
to function properly and the Company suffers any interruption in its ability to manage and operate its business, the Companys results of operations and financial condition could be adversely affected.
Potential product liability risks exist from the products that the Company sells.
The Companys businesses expose it to potential product liability risks that are inherent in the design, manufacture and sale of its
products and the products of third-party vendors that the Company uses or resells. Although the Company currently maintains what it believes to be suitable and adequate product liability insurance, there can be no assurance that the Company will be
able to maintain its insurance on acceptable terms or that its insurance will provide adequate protection against all potential liabilities. In the event of a claim against it, a lack of sufficient insurance coverage could have a material adverse
effect on the Companys financial condition, liquidity and results of operations. Moreover, even if the Company maintains adequate insurance, a successful claim could still have a material adverse effect on its financial condition, liquidity
and results of operations.
The Company may be adversely affected by litigation or other regulatory proceedings.
The Company is a defendant from time to time in litigation and regulatory proceedings relating to its business. Due to the inherent
uncertainties of litigation and regulatory proceedings, the Company cannot accurately predict the ultimate outcome of any such litigation or proceedings. An unfavorable outcome could adversely impact the Companys business, financial condition
or results of operations.
The Company is subject to risks relating to organizational changes.
The Company regularly executes organizational changes such as acquisitions, divestitures and realignments to support its growth and cost
management strategies. In addition, the Company commits significant resources to identify, develop and retain key employees to ensure uninterrupted leadership and direction. If the Company is unable to successfully manage these and other
organizational changes, its results of operations and financial condition could be adversely affected.
Demand for and supply of the
Companys products may be adversely affected by numerous factors, some of which the Company cannot predict or control, which would adversely affect its results of operations.
Numerous factors may affect the demand for and supply of the Companys products, including:
|
|
|
changes in business relationships with and purchases by or from major customers, suppliers or distributors, including delays or cancellations in
shipments, disputes regarding contract terms or significant changes in financial condition, and changes in contract cost and revenue estimates for new development programs;
|
|
|
|
changes in the market acceptance of its products;
|
|
|
|
increased competition in the markets it serves;
|
- 12 -
|
|
|
declines in the general level of industrial production; or
|
|
|
|
declines in the availability, or increases in the prices, of raw materials.
|
If any of these factors occur, the demand for and supply of the Companys products could suffer, which would adversely affect its results of
operations.
The raw materials used in the Companys production processes and by its suppliers of component parts are subject to price
and supply fluctuations that could increase the costs of products and adversely affect our results of operations.
The
Companys supply of raw materials for its businesses could be interrupted for a variety of reasons, including availability and pricing. Prices for raw materials necessary for production have fluctuated significantly in the past and significant
increases could adversely affect the Companys results of operations and profit margins. Although the Company generally attempts to manage these fluctuations by, among other things, passing along increased raw material prices to its customers
in the form of price increases, there may be a time delay between the increased raw material prices and the Companys ability to increase the price of its products, or the Company may be unable to increase the prices of its products due to
pricing pressure, sales contracts or other factors.
The Companys suppliers of component parts may significantly and
quickly increase their prices in response to increases in costs of raw materials that they use to manufacture the component parts. As a result, the Company may not be able to increase its prices commensurately with its increased costs. Consequently,
the Companys results of operations or financial condition could be materially and adversely affected.
The Company may face various
risks relating to acquisitions, including limitations on its ability to complete acquisitions or successfully integrate acquired businesses.
The Company expects to continue its strategy of identifying and acquiring businesses with complementary products and services that it
believes will enhance its operations and profitability. However, there can be no assurance that the Company will be able to continue to find suitable businesses to purchase or that it will be able to acquire such businesses on acceptable terms. In
addition, there is no assurance that the Company will be able to avoid acquiring or assuming unexpected liabilities, that the Company will be able to integrate successfully any businesses that it purchases into its existing business or that any
acquired businesses will be profitable. The successful integration of new businesses depends on the Companys ability to manage these new businesses and cut excess costs. If the Company is unable to avoid these risks, its results of operations
and financial condition could be adversely affected.
The Company operates in a highly competitive environment.
The Companys domestic and foreign operations are subject to competition from a wide variety of global and local competitors, which
could adversely affect the Companys results of operations by creating downward pricing pressure and/or a decline in the Companys margins or market shares. To compete successfully, the Companys Industrial Segment and
Climate & Industrial Controls Segment must excel in terms of product quality and innovation, customer service, manufacturing and distribution capability and price competitiveness and its Aerospace Segment must excel on the basis of
technological and engineering capability, quality, delivery and service, and price competitiveness.
- 13 -
The Company is subject to risks relating to its foreign operations.
The Companys net sales derived from customers outside the United States were approximately 45% in fiscal 2010, 44% in fiscal 2009
and 47% in fiscal 2008. In addition, many of the Companys manufacturing operations and suppliers are located outside the United States. The Company expects net sales from foreign markets to continue to represent a significant portion of its
total net sales. The Companys foreign operations are subject to risk in addition to those risks of its domestic operations, including:
|
|
|
fluctuations in currency exchange rates;
|
|
|
|
limitations on ownership and on repatriation of earnings;
|
|
|
|
transportation delays and interruptions;
|
|
|
|
political, social and economic instability and disruptions;
|
|
|
|
government embargoes or foreign trade restrictions;
|
|
|
|
the imposition of duties and tariffs and other trade barriers;
|
|
|
|
import and export controls;
|
|
|
|
labor unrest and current and changing regulatory environments;
|
|
|
|
the potential for nationalization of enterprises;
|
|
|
|
difficulties in staffing and managing multi-national operations;
|
|
|
|
limitations on its ability to enforce legal rights and remedies;
|
|
|
|
potentially adverse tax consequences; and
|
|
|
|
difficulties in implementing restructuring actions on a timely basis.
|
If the Company is unable to successfully manage the risks associated with expanding its global business or adequately manage operational fluctuations
internationally, the risks could have a material adverse effect on the Companys business, results of operations or financial condition.
Changes in the Companys tax rates or exposure to additional income tax liabilities could affect profitability.
The Company is subject to income taxes in the United States and various foreign jurisdictions. Domestic and international tax liabilities
are subject to the allocation of income among various tax jurisdictions. The Companys effective tax rate could be adversely affected by changes in the mix among earnings in countries with differing statutory tax rates, changes in the valuation
allowance of deferred tax assets or changes in tax laws. The amount of income taxes paid is subject to ongoing audits by United States federal, state and local tax authorities and by non-United States authorities. If these audits result in
assessments different from amounts reserved, future financial results may include unfavorable adjustments to the Companys tax liabilities, which could have a material adverse effect on the Companys results of operations.
- 14 -
The Obama administration has proposed legislation that would change how U.S. multinational
corporations are taxed on their foreign income. If such legislation is enacted, the Companys effective tax rate and, in turn, the Companys profitability, could be materially impacted.
The Companys future growth is partly dependent on the development of new products and technologies.
The markets the Company operates in are characterized by rapidly changing technologies and frequent introductions of new products and
services. The Companys ability to develop new products based on technological innovation can affect its competitive position and often requires the investment of significant resources. Difficulties or delays in research, development or
production of new products and services or failure to gain market acceptance of new products and technologies may significantly reduce future revenues and adversely affect the Companys competitive position.
The Companys future growth is partly dependent on the preservation of its intellectual property.
Protecting the Companys intellectual property is critical to its innovation efforts. The Company owns a number of patents,
trademarks and licenses related to its products and has exclusive and non-exclusive rights under patents owned by others. The Companys intellectual property may be challenged or infringed upon by third parties or the Company may be unable to
maintain, renew or enter into new license agreements with third-party owners of intellectual property on reasonable terms. In addition, the global nature of the Companys business could present increased risks that the Companys
intellectual property will be subject to infringement or other unauthorized use outside of the United States. In such case, the Companys ability to protect its intellectual property rights by legal recourse or otherwise may be limited,
particularly in countries where laws or enforcement practices are undeveloped or do not recognize or protect intellectual property rights to the same extent as the United States. Unauthorized use of the Companys intellectual property rights or
inability to preserve existing intellectual property rights could adversely impact the Companys competitive position and results of operations.
The Company may be adversely affected by the impact of environmental and safety regulations to which it is subject.
The Companys operations necessitate the use and handling of hazardous materials and, as a result, it is subject to various United
States federal, state and local laws and regulations, as well as foreign laws, designed to protect the environment and to regulate the discharge of materials into the environment. These laws impose penalties, fines and other sanctions for
non-compliance and liability for response costs, property damages and personal injury resulting from past and current spills, disposals or other releases of, or the exposure to, hazardous materials. Among other laws, the Company is subject to the
United States federal Superfund law, under which it has been designated as a potentially responsible party and may be liable for clean-up costs associated with various waste sites, some of which are on the United States
Environmental Protection Agencys Superfund priority list. The Company could incur substantial costs as a result of non-compliance with or liability for cleanup or other costs or damages under environmental laws, including the Superfund law.
- 15 -
In addition, increased worldwide focus on climate change issues has led to recent
legislative and regulatory efforts to limit greenhouse gas emissions, including regulation of such emissions through a cap-and-trade system in the United States. Changes in or to regulation of greenhouse gas emissions and other climate
change concerns could subject the Company to additional costs and restrictions, including increased energy and raw material costs. While such regulation appears likely in the United States, until definitive regulations are adopted, the Company is
not able to predict how such regulations would affect the Companys business, operations or financial results.
The
Company may be subject to more stringent environmental laws in the future. If more stringent environmental laws are enacted in the future, these laws could have a material adverse effect on the Companys business, results of operations and
financial condition.
Increasing costs of certain employee and retiree benefits could adversely affect the Companys results of
operations.
The amount of expenses recorded for the Companys defined benefit pension plans is dependent on changes
in market interest rates and the value of plan assets, which are dependent on actual plan asset returns. Significant changes in market interest rates and decreases in the fair value of plan assets and investment losses on plan assets would increase
expenses and may adversely impact the Companys future results of operations.
The Company does business with the United States
government and as such is subject to government regulations.
In addition to the risks identified herein, doing business
with the United States government subjects the Company to unusual risks, including dependence on the level of government spending and compliance with and changes in governmental procurement regulations. Agreements relating to the sale of products to
government entities may be subject to termination, reduction or modification, either at the convenience of the government or for the Companys failure to perform under the applicable contract. The Company is subject to government investigations
of business practices and compliance with government procurement regulations. If the Company were charged with wrongdoing as a result of any such investigation, it could be suspended from bidding on or receiving awards of new government contracts,
which could have a material adverse effect on the Companys results of operations.
ITEM 1B. Unresolved Staff
Comments
.
None.
ITEM 1C. Executive Officers of the Registrant
.
The Companys Executive Officers are as follows:
|
|
|
|
|
|
|
Name
|
|
Position
|
|
Officer
Since(1)
|
|
Age as of
8/15/2010
|
Donald E. Washkewicz
|
|
Chairman of the Board, Chief Executive Officer and President
|
|
1997
|
|
60
|
|
|
|
|
Marwan M. Kashkoush
|
|
Executive Vice President Sales, Marketing and Operations Support
|
|
2000
|
|
56
|
- 16 -
|
|
|
|
|
|
|
Name
|
|
Position
|
|
Officer
Since(1)
|
|
Age as of
8/15/2010
|
Timothy K. Pistell
|
|
Executive Vice President Finance and Administration and Chief Financial Officer
|
|
1993
|
|
63
|
|
|
|
|
Lee C. Banks
|
|
Executive Vice President and Operating Officer
|
|
2001
|
|
47
|
|
|
|
|
Robert P. Barker
|
|
Executive Vice President, Operating Officer and President Aerospace Group
|
|
2003
|
|
60
|
|
|
|
|
Thomas L. Williams
|
|
Executive Vice President and Operating Officer
|
|
2005
|
|
51
|
|
|
|
|
Dana A. Dennis
|
|
Senior Vice President Finance
|
|
1999
|
|
62
|
|
|
|
|
Robert W. Bond
|
|
Vice President and President Fluid Connectors Group
|
|
2000
|
|
52
|
|
|
|
|
Michael Chung
|
|
Vice President and President Asia Pacific Group
|
|
2008
|
|
47
|
|
|
|
|
Jeffery A. Cullman
|
|
Vice President and President Hydraulics Group
|
|
2006
|
|
55
|
|
|
|
|
John G. Dedinsky, Jr.
|
|
Vice President Global Supply Chain and Procurement
|
|
2006
|
|
53
|
|
|
|
|
William G. Eline
|
|
Vice President Chief Information Officer
|
|
2002
|
|
54
|
|
|
|
|
John R. Greco
|
|
Vice President and President Instrumentation Group
|
|
2006
|
|
56
|
|
|
|
|
Thomas F. Healy
|
|
Vice President and President Climate & Industrial Controls Group
|
|
2006
|
|
50
|
|
|
|
|
William R. Hoelting
|
|
Vice President Tax
|
|
2007
|
|
53
|
|
|
|
|
Pamela J. Huggins
|
|
Vice President and Treasurer
|
|
2003
|
|
56
|
|
|
|
|
Kurt A. Keller
|
|
Vice President and President Seal Group
|
|
2009
|
|
52
|
|
|
|
|
A. Ricardo Machado
|
|
Vice President and President Latin America Group
|
|
2006
|
|
62
|
|
|
|
|
Jon P. Marten
|
|
Vice President and Controller
|
|
2008
|
|
54
|
|
|
|
|
M. Craig Maxwell
|
|
Vice President Technology and Innovation
|
|
2003
|
|
52
|
|
|
|
|
Thomas A. Piraino, Jr.
|
|
Vice President, General Counsel and Secretary
|
|
1998
|
|
61
|
|
|
|
|
Peter Popoff
|
|
Vice President and President Filtration Group
|
|
2008
|
|
58
|
- 17 -
|
|
|
|
|
|
|
Name
|
|
Position
|
|
Officer
Since(1)
|
|
Age as of
8/15/2010
|
Charly Saulnier
|
|
Vice President and President Europe, Middle East and Africa Group
|
|
2008
|
|
62
|
|
|
|
|
Daniel S. Serbin
|
|
Vice President Human Resources
|
|
2005
|
|
56
|
|
|
|
|
Roger S. Sherrard
|
|
Vice President and President Automation Group
|
|
2003
|
|
44
|
|
(1)
|
Officers of the Company are elected by the Board of Directors to serve for a term of one-year or until their respective successors are elected, except in the case of
death, resignation or removal. Messrs. Pistell, Eline, Maxwell, Piraino, Serbin and Sherrard and Ms. Huggins have served in the executive capacities indicated above opposite their respective names during each of the past five years.
|
Mr. Washkewicz has served as a Director of the Company since 2000. Mr. Washkewicz has been Chairman
of the Board of Directors of the Company since October 2004, Chief Executive Officer of the Company since July 2001, and President since January 2007.
Mr. Kashkoush who will be retiring effective September 30, 2010 has been Executive Vice President Sales, Marketing and
Operations Support since October 2007. He was Corporate Vice President Worldwide Sales and Marketing from October 2003 to October 2007.
Mr. Banks has been an Executive Vice President since August 2008 and has been an Operating Officer since November 2006. He was a
Senior Vice President from November 2006 to August 2008, Vice President from October 2001 to November 2006, and President of the Hydraulics Group from October 2003 to November 2006. He is also a Director of Nordson Corporation.
Mr. Barker has been an Executive Vice President since August 2008 and has been an Operating Officer since November 2006 and
President of the Aerospace Group since March 2003. He was a Senior Vice President from November 2006 to August 2008 and Vice President from April 2003 to November 2006.
Mr. Williams has been an Executive Vice President since August 2008 and has been an Operating Officer since November 2006. He was a
Senior Vice President from November 2006 to August 2008 and Vice President and President of the Instrumentation Group from March 2005 to November 2006. He is also a Director of Chart Industries, Inc.
Mr. Dennis who will be retiring effective September 30, 2010 has been Senior Vice President Finance since August 2008.
He was a Vice President from October 2001 to August 2008 and Controller from July 1999 to August 2008.
Mr. Bond has been
a Vice President since July 2000 and has been President of the Fluid Connectors Group since March 2005.
- 18 -
Mr. Chung has been a Vice President and President of the Asia Pacific Group since March
2008. He was Vice President Operations of the Hydraulic Group in Asia from January 2005 to March 2008.
Mr. Cullman has been a Vice President and President of the Hydraulics Group since November 2006. He was Vice President
Operations of the Hydraulics Group from July 2002 to November 2006.
Mr. Dedinsky has been Vice President
Global Supply Chain and Procurement since January 2006. He was Vice President Global Sourcing and Procurement from July 2004 to January 2006.
Mr. Greco has been a Vice President and President of the Instrumentation Group since October 2006. He was Vice President and General
Manager of the Global Parflex Division from August 2005 to October 2006 and General Manager of the Parflex Division from March 1996 to August 2005.
Mr. Healy has been a Vice President since April 2006 and has been President of the Climate & Industrial Controls Group
since July 2006. He was a Climate & Industrial Controls Group Vice President and General Manager of Mobile Climate Systems Division from September 2004 to April 2006.
Mr. Hoelting has been Vice President Tax since February 2007. He was Vice President Taxation from January 1998 to
February 2007.
Mr. Keller has been Vice President and President of the Seal Group since August 2009. He was Vice
President of Operations of the Seal Group from July 2005 to August 2009 and General Manager of O-Ring Division from April 1999 to July 2005.
Mr. Machado has been a Vice President since January 2006 and has been President of the Latin America Group since March 2000.
Mr. Marten has been Vice President and Controller since August 2008. He was an Assistant Controller of the Corporation
from July 2007 to August 2008 and Vice President and Controller of the Aerospace Group from October 2004 to July 2007.
Mr. Popoff has been a Vice President and President of the Filtration Group since February 2008. He was Vice President
Operations of the Filtration Group from April 2006 to February 2008 and Vice President/General Manager of the Global Racor Division from July 2004 to April 2006.
Mr. Saulnier has been Vice President and President of the Europe, Middle East and Africa Group since September 2008. He was
President of Sales Companies Europe, Middle East and Africa from January 2008 to September 2008 and Vice President Operations of Sales Companies South from July 2001 to January 2008.
ITEM 2
.
Properties
. The Companys corporate headquarters is located in Cleveland, Ohio and, at
June 30, 2010, the Company had 304 manufacturing plants and 286 distribution centers and sales and administrative offices throughout the world, none of which were individually material to its operations. The facilities are situated in 39 states
within the United States and in 45 other countries. The Company owns the majority of its manufacturing plants and distribution centers, and its leased properties primarily
- 19 -
consist of sales and administrative offices. The number of facilities used by each of the Companys operating segments is summarized by type and geographic location in the tables below:
|
|
|
|
|
|
|
|
|
Type of Facility
|
|
|
Manufacturing
Plants
|
|
Distribution
Centers
|
|
Sales and
Administrative Offices
|
Industrial
|
|
255
|
|
90
|
|
151
|
Aerospace
|
|
24
|
|
3
|
|
12
|
Climate & Industrial Controls
|
|
25
|
|
3
|
|
27
|
Total
|
|
304
|
|
96
|
|
190
|
|
|
|
|
|
|
|
|
|
|
|
Geographic Location
|
|
|
North America
|
|
Europe
|
|
Asia-Pacific
|
|
Latin America
|
Industrial
|
|
213
|
|
165
|
|
96
|
|
22
|
Aerospace
|
|
29
|
|
5
|
|
4
|
|
1
|
Climate & Industrial Controls
|
|
44
|
|
7
|
|
3
|
|
1
|
Total
|
|
286
|
|
177
|
|
103
|
|
24
|
Several facilities are
shared among each of the Companys operating segments. To avoid double counting, each shared facility is counted once, primarily in the Industrial Segment.
The Company believes that its properties have been adequately maintained, are in good condition generally and are suitable and adequate
for its business as presently conducted. The extent to which the Company uses its properties varies by property and from time to time. The Company believes that its restructuring efforts have brought capacity levels closer to present and anticipated
needs. Most of the Companys manufacturing facilities remain capable of handling additional volume increases.
ITEM 3
.
Legal Proceedings
.
Parker ITR S.r.l. (Parker ITR), a subsidiary acquired on January 31, 2002, has
been the subject of a number of lawsuits and regulatory investigations since April 27, 2007, when a grand jury in the Southern District of Florida issued a subpoena to Parker ITR and the Company requiring the production of documents, in
particular documents related to communications with competitors and customers related to Parker ITRs business unit that manufactures marine hose, typically used in oil transfer. The lawsuits and investigations relate to allegations that for a
period of up to 21 years, the Parker ITR business unit that manufactures and sells marine hose conspired with competitors in unreasonable restraint of trade to artificially raise, fix, maintain or stabilize prices, rig bids and allocate markets and
customers for marine oil and gas hose in the United States and in other jurisdictions. The time period for the alleged illegal activities by Parker ITRs marine hose business unit varies by jurisdiction. Parker ITR and the Company have
cooperated with all of the regulatory authorities investigating the activities of the Parker ITR business unit that manufactures and sells marine hose and continue to cooperate with the investigations that remain ongoing. Several of the lawsuits and
investigations have concluded. The following lawsuits and investigations remain pending or were resolved after March 31, 2010.
- 20 -
Four class action lawsuits were filed in the Southern District of Florida:
Shipyard
Supply LLC v. Bridgestone Corporation, et al.
, filed May 17, 2007;
Expro Gulf Limited v. Bridgestone Corporation, et al.
, filed June 6, 2007;
Bayside Rubber & Products, Inc. v. Trelleborg Industrie S.A., et al.
,
filed June 25, 2007;
Bayside Rubber & Products, Inc. v. Caleca, et al
., filed July 12, 2007; and one in the Southern District of New York:
Weeks Marine, Inc. v. Bridgestone Corporation, et al.
, filed July 27,
2007. On September 12, 2008, the plaintiffs filed an amended consolidated class action complaint. These lawsuits involve conduct from January 1985 to May 2007. Plaintiffs have since filed another amended consolidated complaint naming prior
owners of the Parker ITR business unit that manufactures and sells marine hose. Plaintiffs generally seek treble damages, a permanent injunction, attorneys fees, and pre-judgment and post-judgment interest.
The Company and Parker ITR reached a settlement of the class action litigation in the United States, and the court granted final approval
of that settlement on January 13, 2010. On February 17, 2009, Parker ITR entered into a separate agreement to settle possible private causes of action outside the United States.
Brazilian competition authorities commenced their investigations on November 14, 2007. Parker ITR filed a procedural defense in
January 2008. The Brazilian competition authorities have not yet responded to Parker ITRs filing. The Brazilian competition authorities investigation is ongoing and the Company and Parker ITR continue to cooperate. The Brazilian
authorities appear to be investigating the period from 1999 through May 2007. Because the Brazilian competition authorities have not yet responded to Parker ITRs initial filing, the potential outcome of this investigation is uncertain and will
depend on the resolution of numerous issues not yet addressed at the current preliminary stage of the investigation.
On
May 15, 2007, the European Commission issued its initial Request for Information to the Company and Parker ITR. On January 28, 2009, the European Commission announced the results of its investigation of the alleged cartel activities. As
part of its decision, the European Commission found that Parker ITR infringed Article 81 of the European Commission treaty from April 1986 to May 2, 2007 and fined Parker ITR 25.61 million euros. The European Commission also determined
that the Company was jointly and severally responsible for 8.32 million euros of the total fine which related to the period from January 2002, when the Company acquired Parker ITR, to May 2, 2007, when the cartel activities ceased. Parker
ITR and the Company filed an appeal to the Court of First Instance of the European Communities on April 10, 2009.
The
Australian Competition and Consumer Commission (ACCC) filed a statement of claim in the Federal Court of Australia on May 29, 2009 and named Parker ITR as a respondent. Counsel for Parker ITR accepted service related to the ACCCs
statement of claim and hearings have been held in the matter. The ACCC is investigating conduct through 2007. On December 10, 2009, Parker ITR and the ACCC presented a proposed settlement to the court which provides for a total fine of 675,000
Australian dollars, which was approved on April 13, 2010. Parker ITR has paid this fine, which, as of April 23, 2010 (date of payment), was approximately $626 thousand (based on the then-current exchange rate).
An additional related action was brought against the Company on May 25, 2010 under the False Claims Act in the Central
District of California:
The United States of America ex rel. Douglas Farrow v. Trelleborg, AB et al.
The United States declined to intervene against the Company or Parker ITR in the case. Plaintiff generally seeks treble damages, penalties
for each false claim and attorneys fees.
- 21 -
ITEM 4
. (Removed and Reserved).
PART II
ITEM 5
.
Market for Registrants Common Equity, Related Stockholder Matters and Issuer Purchases of Equity
Securities
.
|
(a)
|
Market for the Registrants Common Equity
.
The Companys common stock is listed for trading on the New York Stock Exchange. Information
regarding stock price and dividend information with respect to the Companys common stock, as set forth on page 13-40 of Exhibit 13 to this Annual Report on Form 10-K, is incorporated into this section by reference. As of July 30, 2010,
the number of shareholders of record of the Company was 4,383.
|
|
(b)
|
Use of Proceeds
.
Not Applicable.
|
|
(c)
|
Purchases of Equity Securities by the Issuer and Affiliated Purchasers
.
|
|
|
|
|
|
|
|
|
|
|
|
Period
|
|
(a) Total
Number
of Shares
Purchased
|
|
|
(b) Average
Price Paid
Per Share
|
|
(c) Total Number of
Shares
Purchased
as Part of Publicly
Announced Plans
or Programs (1)
|
|
(d) Maximum Number
(or Approximate
Dollar Value) of
Shares that May Yet
Be
Purchased
Under the Plans or
Programs
|
April 1, 2010 through April 30, 2010
|
|
25,700
|
|
|
$
|
68.05
|
|
25,700
|
|
9,356,608
|
May 1, 2010 through May 31, 2010
|
|
51,500
|
|
|
$
|
64.94
|
|
51,500
|
|
9,305,108
|
June 1, 2010 through June 30, 2010
|
|
97,882
|
(2)
|
|
$
|
60.19
|
|
82,786
|
|
9,222,322
|
Total:
|
|
175,082
|
|
|
$
|
62.74
|
|
159,986
|
|
9,222,322
|
(1)
|
On August 16, 1990, the Company publicly announced that its Board of Directors authorized the repurchase by the Company of up to 3.0 million shares of its
common stock. From time to time, the Board of Directors has adjusted the number of shares authorized for repurchase under this program. On January 28, 2009, the Finance Committee of the Board of Directors of the Company approved an increase in
the number of shares authorized for repurchase under this program so that, beginning on such date, the aggregate number of shares authorized for repurchase was equal to 10.0 million. Subject to this overall limitation, each fiscal year the Company
is authorized to repurchase an amount of common shares equal to the greater of 7.5 million shares or five percent of the shares outstanding as of the end of the prior fiscal year. There is no expiration date for this program.
|
- 22 -
(2)
|
Includes 15,096 shares surrendered to the Company by an executive officer to satisfy tax withholding obligations on restricted stock issued under the Companys
Long Term Incentive Awards.
|
ITEM 6
.
Selected Financial Data
.
The information set
forth on page 13-43 of Exhibit 13 to this Annual Report on Form 10-K is incorporated into this section by reference.
ITEM 7
.
Managements Discussion and Analysis of Financial Condition and Results of Operations
.
The
information set forth on pages 13-2 to 13-13 of Exhibit 13 to this Annual Report on Form 10-K is incorporated into this section by reference.
ITEM 7A
.
Quantitative and Qualitative Disclosures About Market Risk
.
The Company enters into
forward exchange contracts and costless collar contracts, comprised of puts and calls, to reduce its exposure to fluctuations in both freely convertible and non-freely convertible foreign currencies. These contracts are with major financial
institutions and the risk of loss is considered remote. None of these contracts were designated as hedging instruments. The Company does not hold or issue derivative financial instruments for trading purposes. The total fair value and carrying
amount and any risk to the Company as a result of these arrangements is not material to the Companys financial position, liquidity or results of operations.
The Company considers Venezuela to be a highly inflationary economy; therefore, the United States dollar is the functional currency for
the Companys Venezuelan operations. The effect of treating Venezuela as a highly inflationary economy did not have a material effect on the Companys results of operations or financial position.
The Companys debt portfolio contains variable rate debt, inherently exposing the Company to interest rate risk. The Companys
objective is to maintain a 60/40 mix between fixed rate and variable rate debt, thereby limiting its exposure to changes in near-term interest rates. A 100 basis point increase in near-term interest rates would increase annual interest expense on
variable rate debt by approximately $856,370.
For further discussion, see the discussion of Significant Accounting Policies
Footnote on page 13-22 of Exhibit 13 to this Annual Report on Form 10-K and incorporated into this section by reference.
ITEM 8
.
Financial Statements and Supplementary Data
.
The information set forth on pages 13-14 to 13-40 of
Exhibit 13 to this Annual Report on Form 10-K is incorporated into this section by reference.
ITEM 9
.
Changes in and Disagreements with Accountants on Accounting and Financial Disclosure
.
None.
- 23 -
ITEM 9A.
Controls and Procedures
.
The Company carried out an
evaluation, under the supervision and with the participation of the Companys management, including the Companys principal executive officer and principal financial officer, of the effectiveness of the Companys disclosure controls
and procedures as of June 30, 2010. Based on this evaluation, the Companys principal executive officer and principal financial officer concluded that, as of the end of fiscal year 2010, the Companys disclosure controls and
procedures were effective.
Managements Report on Internal Control over Financial Reporting set forth on page 13-41 of
Exhibit 13 to this Annual Report on Form 10-K is incorporated into this section by reference. The Report of Independent Registered Public Accounting Firm set forth on page 13-42 of Exhibit 13 to this Annual Report on Form 10-K is incorporated into
this section by reference.
There was no change in the Companys internal control over financial reporting during the
quarter ended June 30, 2010 that materially affected, or is reasonably likely to materially affect, the Companys internal control over financial reporting.
ITEM 9B.
Other Information
.
None.
PART III
ITEM 10
.
Directors, Executive Officers and Corporate Governance
.
Information required with respect to
the Directors of the Company is set forth under the caption Election of Directors in the definitive Proxy Statement for the Companys 2010 Annual Meeting of Shareholders to be held October 27, 2010 (the 2010 Proxy
Statement) and is incorporated herein by reference. Information with respect to the executive officers of the Company is included in Part I, Item 1C hereof under the caption Executive Officers of the Registrant.
The information set forth under the caption Section 16(a) Beneficial Ownership Reporting Compliance in the 2010 Proxy
Statement is incorporated herein by reference.
The Company has adopted a Code of Conduct that applies to its Chief Executive
Officer, Chief Financial Officer and Controller. The Code of Conduct is posted on the Companys investor relations internet website at
www.phstock.com
under the Corporate Governance page. Any amendment to, or waiver from, a provision of
the Companys Code of Conduct that applies to its Chief Executive Officer, Chief Financial Officer or Controller will also be posted at
www.phstock.com
under the Corporate Governance page.
The information set forth under the captions The Audit Committee and Report of the Audit Committee in the 2010
Proxy Statement is incorporated herein by reference.
ITEM 11.
Executive Compensation
.
The
information set forth under the captions Compensation Discussion and Analysis, Compensation Committee Report, and Compensation Tables in the 2010 Proxy Statement is incorporated herein by reference.
ITEM 12
.
Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters
.
The information set forth under the caption Principal Shareholders in the 2010 Proxy Statement is incorporated herein by reference. The information set forth under the caption Equity Compensation Plan Information in the 2010
Proxy Statement is incorporated herein by reference.
- 24 -
ITEM 13
.
Certain Relationships and Related Transactions, and Director
Independence
.
The information set forth under the captions Certain Relationships and Related Transactions, Review and Approval of Transactions with Related Persons, and Director Independence in the
2010 Proxy Statement is incorporated herein by reference.
ITEM 14.
Principal Accountant Fees and
Services
.
The information set forth under the captions Audit Fees, Audit-Related Fees, Tax Fees, All Other Fees and Audit Committee Pre-Approval Policies and Procedures in
the 2010 Proxy Statement is incorporated herein by reference.
PART IV
ITEM 15
.
Exhibits and Financial Statement Schedules
.
|
a.
|
The following are filed as part of this report:
|
|
1.
|
Financial Statements and Schedule
|
The financial statements and schedule listed in the accompanying Index to Consolidated Financial Statements and Schedule are filed or
incorporated by reference as part of this Annual Report on Form 10-K.
The exhibits
listed in the accompanying Exhibit Index and required by Item 601 of Regulation S-K (numbered in accordance with Item 601 of Regulation S-K) are filed, furnished or incorporated by reference as part of this Annual Report on Form 10-K.
- 25 -
SIGNATURES
Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the registrant has duly caused this
report to be signed on its behalf by the undersigned, thereunto duly authorized.
|
|
|
PARKER-HANNIFIN CORPORATION
|
|
|
By:
|
|
/s/ Timothy K. Pistell
|
|
|
Timothy K. Pistell
|
|
|
Executive Vice President Finance and
|
|
|
Administration and Chief Financial Officer
|
August 26, 2010
Pursuant
to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the registrant and in the capacities and on the date indicated.
Signature and Title
DONALD E. WASHKEWICZ, Chairman of the Board of Directors and Chief Executive Officer; JON P. MARTEN, Principal Accounting Officer; ROBERT G. BOHN,
Director; LINDA S. HARTY, Director; WILLIAM E. KASSLING, Director; ROBERT J. KOHLHEPP, Director; GIULIO MAZZALUPI, Director; KLAUS-PETER MÜLLER, Director; CANDY M. OBOURN, Director; JOSEPH M. SCAMINACE, Director; WOLFGANG R. SCHMITT, Director;
ÅKE SVENSSON, Director; MARKOS I. TAMBAKERAS, Director; and JAMES L. WAINSCOTT, Director.
Date: August 26, 2010
|
/s/ Timothy K. Pistell
|
Timothy K. Pistell, Executive Vice President
|
Finance and Administration and Chief Financial
|
Officer (Principal Financial Officer and Attorney-in-Fact)
|
- 26 -
PARKER-HANNIFIN CORPORATION
INDEX TO CONSOLIDATED FINANCIAL STATEMENTS AND SCHEDULE
|
|
|
|
|
|
|
Reference
|
|
|
Form 10-K
Annual
Report
(Page)
|
|
Excerpt from
Exhibit
13
(Page)
|
Data incorporated by reference from Exhibit 13:
|
|
|
|
|
|
|
|
Managements Report on Internal Control over Financial Reporting
|
|
|
|
13 - 41
|
|
|
|
Report of Independent Registered Public Accounting Firm
|
|
|
|
13 - 42
|
|
|
|
Consolidated Statement of Income for the years ended June 30, 2010, 2009 and 2008
|
|
|
|
13 - 14
|
|
|
|
Consolidated Balance Sheet at June 30, 2010 and 2009
|
|
|
|
13 - 17
|
|
|
|
Consolidated Statement of Cash Flows for the years ended June 30, 2010, 2009 and 2008
|
|
|
|
13 - 18
|
|
|
|
Consolidated Statement of Equity for the years ended June 30, 2010, 2009 and 2008
|
|
|
|
13 - 19
|
|
|
|
Notes to Consolidated Financial Statements
|
|
|
|
13 - 20 to 13 - 40
|
|
|
|
Schedule:
|
|
|
|
|
|
|
|
II - Valuation and Qualifying Accounts
|
|
F-2
|
|
|
Individual financial statements and related applicable schedules for the Registrant (separately) have been omitted because the Registrant
is primarily an operating company and its subsidiaries are considered to be wholly-owned.
F-1
PARKER-HANNIFIN CORPORATION
SCHEDULE II - VALUATION AND QUALIFYING ACCOUNTS
FOR THE YEARS ENDED JUNE 30, 2008, 2009 and 2010
(Dollars in Thousands)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Column A
|
|
Column B
|
|
Column C
|
|
Column D
|
|
|
Column E
|
Description
|
|
Balance at
Beginning
Of Period
|
|
Additions
Charged to
Costs and
Expenses
|
|
Other
(Deductions)/
Additions (A)
|
|
|
Balance
At End
Of Period
|
Allowance for doubtful accounts:
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Year ended June 30, 2008
|
|
$
|
11,655
|
|
$
|
8,470
|
|
$
|
(3,282
|
)
|
|
$
|
16,843
|
Year ended June 30, 2009
|
|
$
|
16,843
|
|
$
|
9,157
|
|
$
|
(6,185
|
)
|
|
$
|
19,815
|
Year ended June 30, 2010
|
|
$
|
19,815
|
|
$
|
1,871
|
|
$
|
(6,985
|
)
|
|
$
|
14,701
|
Deferred tax asset valuation allowance:
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Year ended June 30, 2008
|
|
$
|
28,896
|
|
$
|
53,324
|
|
$
|
(3,589
|
)
|
|
$
|
78,631
|
Year ended June 30, 2009
|
|
$
|
78,631
|
|
$
|
34,122
|
|
$
|
130
|
|
|
$
|
112,883
|
Year ended June 30, 2010
|
|
$
|
112,883
|
|
$
|
22,970
|
|
$
|
(43,054
|
)
|
|
$
|
92,799
|
(A)
|
For allowance for doubtful accounts, net balance of deductions due to uncollectible accounts charged off and additions due to acquisitions or recoveries. For defered
tax asset valuation allowance, primarily represents adjustments due to acquisitions and net operating losses.
|
F-2
Exhibit Index
|
|
|
Exhibit No.
|
|
Description of Exhibit
|
|
|
Articles of Incorporation and By-Laws
:
|
|
|
(3)(a)
|
|
Amended Articles of Incorporation incorporated by reference to Exhibit 3 to the Registrants Report on Form 10-Q for the quarterly period ended September 30, 1997 (Commission
File No. 1-4982).
|
|
|
(3)(b)
|
|
Code of Regulations, as amended, incorporated by reference to Exhibit 3(ii) to the Registrants Report on Form 10-Q for the quarterly period ended December 31, 2007 (Commission
File No. 1-4982).
|
|
|
|
|
Instruments Defining Rights of Security Holders
:
|
|
|
(4)(a)
|
|
Shareholder Protection Rights Agreement, dated as of February 8, 2007, between the Registrant and Wells Fargo Bank, N.A. (as successor to National City Bank), as Rights Agent,
incorporated by reference to Exhibit 1 to the Registrants Form 8-A filed on February 8, 2007 (Commission File No. 1-4982).
|
|
|
|
|
First Amendment to Shareholder Protection Rights Agreement, dated as of July 6, 2009, between the Registrant and Wells Fargo Bank, N.A. (as successor to National City Bank), as
Rights Agent, incorporated by reference to Exhibit 4(a) to the Registrants Report on Form 10-K for the fiscal year ended June 30, 2009 (Commission File No. 1-4982).
|
|
|
|
|
The Registrant is a party to other instruments, copies of which will be furnished to the Commission upon request, defining the rights of holders of its long-term debt identified in
Note 9 of the Notes to Consolidated Financial Statements on pages 13-28 to 13-29 of Exhibit 13 hereto, which Note is incorporated herein by reference.
|
|
|
|
|
Material Contracts
:
|
|
|
(10)(a)
|
|
Form of Parker-Hannifin Corporation Amended and Restated Change in Control Severance Agreement entered into by the Registrant and executive officers incorporated by reference to
Exhibit 10(a) to the Registrants Report on Form 10-Q for the quarterly period ended September 30, 2008 (Commission File No. 1-4982).
|
|
|
(10)(b)
|
|
Parker-Hannifin Corporation Amended and Restated Change in Control Severance Plan incorporated by reference to Exhibit 10(b) to the Registrants Report on Form 10-Q for the
quarterly period ended September 30, 2008 (Commission File No. 1-4982).
|
|
|
(10)(c)
|
|
Form of Indemnification Agreement entered into by the Registrant and its directors and executive officers incorporated by reference to Exhibit 10(c) to the Registrants Report
on Form 10-K for the fiscal year ended June 30, 2003 (Commission File No. 1-4982).
|
|
|
(10)(d)
|
|
Description of the Parker-Hannifin Corporation Officer Life Insurance Plan incorporated by reference to Exhibit 10(h) to the Registrants Report on Form 10-K for the fiscal
year ended June 30, 2005 (Commission File No. 1-4982).
|
|
|
|
|
|
(10)(e)
|
|
Parker-Hannifin Corporation Amended and Restated Supplemental Executive Retirement Benefits Program incorporated by reference to Exhibit 10(a) to the Registrants Report on
Form 10-Q for the quarterly period ended September 30, 2009 (Commission File No. 1-4982).
|
|
|
(10)(f)
|
|
Amendment to Parker-Hannifin Corporation Amended and Restated Supplemental Executive Retirement Benefits Program incorporated by reference to Exhibit 10.1 to the Registrants
Report on Form 8-K filed with the Commission on April 21, 2010 (Commission File No. 1-4982).
|
|
|
(10)(g)
|
|
Form of Notice of Change to Long Term Disability Benefit and Tax Election Form for certain executive officers incorporated by reference to Exhibit 10(j) to the Registrants
Report on Form 10-K for the fiscal year ended June 30, 2007 (Commission File No. 1-4982).
|
|
|
(10)(h)
|
|
Parker-Hannifin Corporation Amended and Restated 1993 Stock Incentive Program incorporated by reference to Exhibit 10(i) to the Registrants Report on Form 10-K for the fiscal
year ended June 30, 2009 (Commission File No. 1-4982).
|
|
|
(10)(i)
|
|
Parker-Hannifin Corporation Amended and Restated 2003 Stock Incentive Plan incorporated by reference to Exhibit 10(j) to the Registrants Report on Form 10-K for the fiscal
year ended June 30, 2009 (Commission File No. 1-4982).
|
|
|
(10)(j)
|
|
Parker-Hannifin Corporation 2009 Omnibus Stock Incentive Plan incorporated by reference to Appendix A of the Registrants Proxy Statement on Schedule 14A, filed with the
Commission on September 28, 2009 (Commission File No. 1-4982).
|
|
|
(10)(k)
|
|
Parker-Hannifin Corporation Performance Bonus Plan incorporated by reference to Exhibit A to the Registrants Definitive Proxy Statement filed with the Commission on September
26, 2005 (Commission File No. 1-4982).
|
|
|
(10)(l)
|
|
Form of 2007 Notice of Grant of Stock Options with Tandem Stock Appreciation Rights for executive officers incorporated by reference to Exhibit 10.3 to the Registrants Report
on Form 8-K filed with the Commission on August 22, 2006 (Commission File No. 1-4982).
|
|
|
(10)(m)
|
|
Form of 2008 Notice of Grant of Stock Options with Tandem Stock Appreciation Rights for executive officers incorporated by reference to Exhibit 10.1 to the Registrants Report
on Form 8-K/A filed with the Commission on September 5, 2007 (Commission File No. 1-4982).
|
|
|
(10)(n)
|
|
Form of 2009 Notice of Stock Options Award with Tandem Stock Appreciation Rights for executive officers incorporated by reference to Exhibit 10(d) to the Registrants Report on
Form 10-Q for the quarterly period ended September 30, 2008 (Commission File No. 1-4982).
|
|
|
|
|
|
(10)(o)
|
|
Form of 2010 Notice of Stock Options with Tandem Stock Appreciation Rights for executive officers incorporated by reference to Exhibit 10(d) to the Registrants Report on Form
10-Q for the quarterly period ended September 30, 2009 (Commission File No. 1-4982).
|
|
|
(10)(p)
|
|
Form of Notice of FY09 Target Incentive Bonus Award Under the Parker-Hannifin Corporation Performance Bonus Plan incorporated by reference to Exhibit 10(e) to the Registrants
Report on Form 10-Q for the quarterly period ended September 30, 2008 (Commission File No. 1-4982).
|
|
|
(10)(q)
|
|
Form of Notice of FY10 Target Incentive Bonus Award incorporated by reference to Exhibit 10(a) to the Registrants Report on Form 10-Q for the quarterly period ended December
31, 2009 (Commission File No. 1-4982).
|
|
|
(10)(r)
|
|
Form of Notice of FY10 Target Incentive Bonus Award Under the Parker-Hannifin Corporation Performance Bonus Plan incorporated by reference to Exhibit 10(b) to the Registrants
Report on Form 10-Q for the quarterly period ended December 31, 2009 (Commission File No. 1-4982).
|
|
|
(10)(s)
|
|
Form of 2007-08-09 Long Term Incentive Award Letter Under the Parker-Hannifin Corporation Performance Bonus Plan incorporated by reference to Exhibit 10.6 to the Registrants
Report on Form 8-K filed with the Commission on August 22, 2006 (Commission File No. 1-4982).
|
|
|
(10)(t)
|
|
Form of 2008-09-10 Long Term Incentive Award Letter Under the Parker-Hannifin Corporation Performance Bonus Plan incorporated by reference to Exhibit 10.4 to the Registrants
Report on Form 8-K/A filed with the Commission on September 5, 2007 (Commission File No. 1-4982).
|
|
|
(10)(u)
|
|
Form of Notice of 2009-10-11 Long Term Incentive Award Under the Parker-Hannifin Corporation Performance Bonus Plan incorporated by reference to Exhibit 10(f) to the
Registrants Report on Form 10-Q for the quarterly period ended September 30, 2008 (Commission File No. 1-4982).
|
|
|
(10)(v)
|
|
Form of Notice of FY2010-11-12 Long Term Incentive Performance Award Under the Parker-Hannifin Corporation Performance Bonus Plan incorporated by reference to Exhibit 10(c) to the
Registrants Report on Form 10-Q for the quarterly period ended December 31, 2009 (Commission File No. 1-4982).
|
|
|
(10)(w)
|
|
Form of Notice of Long Term Incentive Performance Award Under the Parker-Hannifin Corporation Performance Bonus Plan.*
|
|
|
(10)(x)
|
|
Form of Notice of RONA Bonus Award Under the Parker-Hannifin Corporation Performance Bonus Plan incorporated by reference to Exhibit 10(h) to the Registrants Report on Form
10-Q for the quarterly period ended September 30, 2009 (Commission File No. 1-4982).
|
|
|
|
|
|
(10)(y)
|
|
Parker-Hannifin Corporation Summary of RONA Bonus Awards in Lieu of Certain Executive Perquisites incorporated by reference to Exhibit 10(h) to the Registrants Report on Form
10-Q for the quarterly period ended September 30, 2008 (Commission File No. 1-4982).
|
|
|
(10)(z)
|
|
Parker-Hannifin Corporation Amended and Restated Savings Restoration Plan incorporated by reference to Exhibit 10(i) to the Registrants Report on Form 10-Q for the quarterly
period ended September 30, 2008 (Commission File No. 1-4982).
|
|
|
(10)(aa)
|
|
Parker-Hannifin Corporation Amended and Restated Pension Restoration Plan incorporated by reference to Exhibit 10(j) to the Registrants Report on Form 10-Q for the quarterly
period ended September 30, 2008 (Commission File No. 1-4982).
|
|
|
(10)(bb)
|
|
Amendment to Parker-Hannifin Corporation Amended and Restated Pension Restoration Plan.*
|
|
|
(10)(cc)
|
|
Parker-Hannifin Corporation Amended and Restated Executive Deferral Plan incorporated by reference to Exhibit 10(k) to the Registrants Report on Form 10-Q for the quarterly
period ended September 30, 2008 (Commission File No. 1-4982).
|
|
|
(10)(dd)
|
|
Parker-Hannifin Corporation Volume Incentive Plan incorporated by reference to Exhibit 10.1 to the Registrants Report on Form 8-K filed with the Commission on August 18, 2009
(Commission File No. 1-4982).
|
|
|
(10)(ee)
|
|
Parker-Hannifin Corporation Sales Company Incentive Plan incorporated by reference to Exhibit 10(x) to the Registrants Report on Form 10-K for the fiscal year ended June 30,
2009 (Commission File No. 1-4982).
|
|
|
(10)(ff)
|
|
Parker-Hannifin Corporation Claw-back Policy incorporated by reference to Exhibit 10.2 to the Registrants Report on Form 8-K filed with the Commission on August 18, 2009
(Commission File No. 1-4982).
|
|
|
(10)(gg)
|
|
Amended and Restated Parker-Hannifin Corporation Non-Employee Directors Stock Plan incorporated by reference to Exhibit 10(x) to the Registrants Report on Form 10-K for
the fiscal year ended June 30, 2004 (Commission File No. 1-4982).
|
|
|
(10)(hh)
|
|
Parker-Hannifin Corporation Non-Employee Directors Stock Option Plan incorporated by reference to Exhibit 10(w) to the Registrants Report on Form 10-K for the fiscal year
ended June 30, 2001 (Commission File No. 1-4982).
|
|
|
(10)(ii)
|
|
Parker-Hannifin Corporation Amended and Restated 2004 Non-Employee Directors Stock Incentive Plan incorporated by reference to Exhibit 10(aa) to the Registrants Report
on Form 10-K for the fiscal year ended June 30, 2009 (Commission File No. 1-4982).
|
|
|
(10)(jj)
|
|
Form of 2007 Notice of Issuance of Restricted Stock for Non-Employee Directors incorporated by reference to Exhibit 10.2 to the Registrants Report on Form 8-K filed with the
Commission on August 22, 2006 (Commission File No. 1-4982).
|
|
|
|
|
|
(10)(kk)
|
|
Form of 2008 Notice of Issuance of Restricted Stock for Non-Employee Directors incorporated by reference to Exhibit 10(c) to the Registrants Report on Form 10-Q for the
quarterly period ended September 30, 2007 (Commission File No. 1-4982).
|
|
|
(10)(ll)
|
|
Form of 2009 Notice of Issuance of Restricted Stock for Non-Employee Directors incorporated by reference to Exhibit 10(l) to the Registrants Report on Form 10-Q for the
quarterly period ended September 30, 2008 (Commission File No. 1-4982).
|
|
|
(10)(mm)
|
|
Amended 2009 Notice of Issuance of Restricted Stock for Non-Employee Directors issued to William E. Kassling dated March 11, 2009 incorporated by reference to Exhibit 10(a) to the
Registrants Report on Form 10-Q for the quarterly period ended March 31, 2009 (Commission File No. 1-4982).
|
|
|
(10)(nn)
|
|
Amended 2009 Notice of Issuance of Restricted Stock for Non-Employee Directors issued to Joseph M. Scaminace dated March 11, 2009 incorporated by reference to Exhibit 10(b) to the
Registrants Report on Form 10-Q for the quarterly period ended March 31, 2009 (Commission File No. 1-4982).
|
|
|
(10)(oo)
|
|
Amended 2009 Notice of Issuance of Restricted Stock for Non-Employee Directors issued to Wolfgang R. Schmitt dated March 11, 2009 incorporated by reference to Exhibit 10(c) to the
Registrants Report on Form 10-Q for the quarterly period ended March 31, 2009 (Commission File No. 1-4982).
|
|
|
(10)(pp)
|
|
Form of 2010 Notice of Issuance of Restricted Stock for Non-Employee Directors incorporated by reference to Exhibit 10(i) to the Registrants Report on Form 10-Q for the
quarterly period ended September 30, 2009 (Commission File No. 1-4982).
|
|
|
(10)(qq)
|
|
Amended and Restated Deferred Compensation Plan for Directors of Parker-Hannifin Corporation incorporated by reference to Exhibit 10(m) to the Registrants Report on Form 10-Q
for the quarterly period ended September 30, 2008 (Commission File No. 1-4982).
|
|
|
(10)(rr)
|
|
Summary of the Compensation of the Non-Employee Members of the Board of Directors, effective October 1, 2008, incorporated by reference to Exhibit 10(n) to the Registrants
Report on Form 10-Q for the quarterly period ended September 30, 2008 (Commission File No. 1-4982).
|
|
|
(11)
|
|
Computation of Common Shares Outstanding and Earnings Per Share is incorporated by reference to Note 5 of the Notes to Consolidated Financial Statements on page 13-26 of Exhibit 13
hereto.*
|
|
|
(12)
|
|
Computation of Ratio of Earnings to Fixed Charges as of June 30, 2010.*
|
|
|
(13)
|
|
Excerpts from Annual Report to Shareholders for the fiscal year ended June 30, 2010 which are incorporated herein by reference thereto.*
|
|
|
(21)
|
|
List of subsidiaries of the Registrant.*
|
|
|
|
|
|
(23)
|
|
Consent of Independent Registered Public Accounting Firm.*
|
|
|
(24)(a)
|
|
Power of Attorney.*
|
|
|
(24)(b)
|
|
Power of Attorney of Messrs. Bohn and Svensson.*
|
|
|
(31)(i)(a)
|
|
Certification of the Principal Executive Officer Pursuant to 17 CFR 240.13a-14(a), as Adopted Pursuant to §302 of the Sarbanes-Oxley Act of 2002.*
|
|
|
(31)(i)(b)
|
|
Certification of the Principal Financial Officer Pursuant to 17 CFR 240.13a-14(a), as Adopted Pursuant to §302 of the Sarbanes-Oxley Act of 2002.*
|
|
|
(32)
|
|
Certification Pursuant to 18 U.S.C. Section 1350, as Adopted Pursuant to §906 of the Sarbanes-Oxley Act of 2002.*
|
|
|
101.INS
|
|
XBRL Instance Document.*
|
|
|
101.SCH
|
|
XBRL Taxonomy Extension Schema Document.*
|
|
|
101.CAL
|
|
XBRL Taxonomy Extension Calculation Linkbase Document.*
|
|
|
101.DEF
|
|
XBRL Taxonomy Extension Definition Linkbase Document.*
|
|
|
101.LAB
|
|
XBRL Taxonomy Extension Label Linkbase Document.*
|
|
|
101.PRE
|
|
XBRL Taxonomy Extension Presentation Linkbase Document.*
|
*
|
Submitted electronically herewith.
|
Attached as
Exhibit 101 to this report are the following formatted in XBRL (Extensible Business Reporting Language): (i) Consolidated Statement of Income for the years ended June 30, 2010, 2009 and 2008, (ii) Consolidated Balance Sheet at
June 30, 2010 and 2009, (iii) Consolidated Statement of Cash Flows for the years ended June 30, 2010, 2009 and 2008, (iv) Consolidated Statement of Equity for the years ended June 30, 2010, 2009 and 2008 and (v) Notes
to Consolidated Financial Statements for the year ended June 30, 2010.
In accordance with Rule 406T of Regulation S-T, the XBRL related
information in Exhibit 101 to this Annual Report on Form 10-K shall not be deemed to be filed for purposes of Section 18 of the Exchange Act, or otherwise subject to the liability of that section, and shall not be part of any
registration or other document filed under the Securities Act or the Exchange Act, except as shall be expressly set forth by specific reference in such filing.
Shareholders may request a copy of any of the exhibits to this Annual Report on Form 10-K by writing to the Secretary, Parker-Hannifin Corporation, 6035
Parkland Boulevard, Cleveland, Ohio 44124-4141.
Parker Hannifin (NYSE:PH)
Historical Stock Chart
From May 2024 to Jun 2024
Parker Hannifin (NYSE:PH)
Historical Stock Chart
From Jun 2023 to Jun 2024