Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes ☐ No ☒
Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes ☐ No ☒
Indicate by check mark whether the registrant: (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.
Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files).
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company, or emerging growth company. See the definitions of "large accelerated filer," "accelerated filer," "smaller reporting company" and “emerging growth company” in Rule 12b-2 of the Exchange Act.:
If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐
Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act). Yes ☐ No ☒
The aggregate market value of the registrant's voting and non-voting common equity held by non-affiliates of the registrant, based upon the $8.15 per share closing price of the registrant's common stock on June 28, 2019, the last business day of the registrant's most recently completed second fiscal quarter, was $23,907,854. Solely for the purpose of this calculation, shares held by directors and executive officers of the registrant have been excluded. Such exclusion should not be deemed a determination or an admission by the registrant that such individuals are, in fact, affiliates of the registrant.
The number of outstanding shares of the registrant's common stock was 5,210,788 as of March 27, 2020.
PART I
Caution Concerning Forward-Looking Statements
This annual report on Form 10-K (this "Report") and the Company's (as defined below) other communications and statements may contain "forward-looking statements" within the meaning of Section 27A of the Securities Act of 1933, as amended, and Section 21E of the Securities Exchange Act of 1934, as amended, including statements about the Company's beliefs, plans, objectives, goals, expectations, estimates, projections and intentions. These statements are subject to significant risks and uncertainties and are subject to change based on various factors, many of which are beyond the Company's control. The words "may," "could," "should," "would," "believe," "anticipate," "estimate," "expect," "intend," "plan," "target," "goal," and similar expressions are intended to identify forward-looking statements. All forward-looking statements, by their nature, are subject to risks and uncertainties. The Company's actual future results may differ materially from those set forth in the Company's forward-looking statements. For information concerning these factors and related matters, see "Risk Factors" in Part I, Item 1A in this Report, and "Management's Discussion and Analysis of Financial Condition and Results of Operations" in Part II, Item 7 in this Report. However, other factors besides those referenced could adversely affect the Company's results, and you should not consider any such list of factors to be a complete set of all potential risks or uncertainties. Any forward-looking statements made by the Company herein speak as of the date of this Report. The Company does not undertake to update any forward-looking statement, except as required by law. As a result, you should not place undue reliance on these forward-looking statements.
The LGL Group, Inc. (together with its subsidiaries, the "Company," "LGL," "we," "us," or "our") is a globally-positioned producer of industrial and commercial products and services. We operate in two identified segments. Our electronic components segment is currently focused on the design and manufacture of highly-engineered, high reliability frequency and spectrum control products. These electronic components ensure reliability and security in aerospace and defense communications, low noise and base accuracy for laboratory instruments, and synchronous data transfers throughout the wireless and Internet infrastructure. Our electronic instruments segment is focused on the design and manufacture of high-performance Frequency and Time reference standards that form the basis for timing and synchronization in various applications. The Company was incorporated in 1928 under the laws of the State of Indiana, and in 2007, the Company was reincorporated under the laws of the State of Delaware as The LGL Group, Inc. We maintain our executive offices at 2525 Shader Road, Orlando, Florida, 32804. Our telephone number is (407) 298-2000. Our common stock is traded on the NYSE American under the symbol "LGL."
We operate through our two principal subsidiaries, M-tron Industries, Inc. (together with its subsidiaries, "MtronPTI"), which has design and manufacturing facilities in Orlando, Florida; Yankton, South Dakota; and Noida, India, and Precise Time and Frequency, LLC ("PTF"), which has a design and manufacturing facility in Wakefield, Massachusetts. We also have local sales and customer support offices in Sacramento, California; Austin, Texas; and Hong Kong.
Our primary objective is to create long-term growth with a market-based approach of designing and offering new products to our customers through both organic research and development, and through strategic partnerships, joint ventures, acquisitions or mergers. We seek to leverage our core strength as an engineering leader to expand client access, add new capabilities and continue to diversify our product offerings. Our focus is on investments that will differentiate us, broaden our portfolio and lead toward higher levels of integration organically and through joint venture, merger and acquisition opportunities. We believe that successful execution of this strategy will lead to a transformation of our product portfolio towards longer product life cycles, better margins and improved competitive position.
Overview of MtronPTI
Originally founded in 1965, MtronPTI designs, manufactures and markets highly-engineered, high reliability frequency and spectrum control products.
These component-level devices are used extensively in infrastructure equipment for the telecommunications and network equipment industries, as well as in electronic systems for applications in defense, aerospace, earth-orbiting satellites, down-hole drilling, medical devices, instrumentation, industrial devices and global positioning systems. As an engineering-centric company, MtronPTI provides close support to the customer throughout its products' entire life
1
cycle, including product design, prototyping, production, and subsequent product upgrades. This collaborative approach has resulted in the development of long-standing business relationships with its blue-chip customer base.
All of MtronPTI’s production facilities are ISO 9001:2008 certified, ITAR registered and Restriction of Hazardous Substances (“RoHS”) compliant. In addition, its U.S. production facilities in Orlando and Yankton are AS9100 Rev D and MIL-STD-790 certified.
MtronPTI Products
MtronPTI's portfolio is divided into two product groupings, Frequency Control and Spectrum Control, and has expanded from primarily crystal-based components to include higher levels of integration, advanced materials science, cavity-based products, and various types of compensation methods employing integrated circuits and other methods to create products geared for applications that require high reliability in harsh environments. These products are differentiated by their precise level of accuracy, their stability over time and within harsh environments, and their very low phase noise.
MtronPTI's Frequency Control product group includes a broad portfolio of XTAL, clock oscillators, VCXO, TCXO OCXO and DOCXO devices which meet some of the tightest specifications, including IEEE 1588 standards. These devices may be based on quartz, quartz MEMS, or advanced materials science designed to achieve higher performance levels than quartz. MtronPTI's products offer high reliability over a wide temperature range and are well-suited for harsh environments, including shock and vibration-resistant oscillators with low-g sensitivity. These products are designed for applications within aerospace and defense, telecommunications infrastructure and instrumentation markets.
MtronPTI's Spectrum Control product group includes a wide array of radio frequency (“RF”), microwave and millimeter wave filters and diplexers covering a frequency range from 1 MHz to 90 GHz, and solid-state power amplifiers covering a frequency range from 300 MHz to 26 GHz, with power output from 10 Watts to 10 kWatts. Filter devices include crystal, ceramic, LC, tubular, combline, cavity, interdigital and metal insert waveguide, as well as digital, analog and mechanical tunable filters, switched filter arrays and RF subsystems. Power amplifiers add active devices to MtronPTI's portfolio and include GaN, GaAS FET, LDMOS and chip and wire technologies in narrow or broadband, module or rack-mounted packages. These products are employed in applications within the aerospace, defense and commercial markets.
New product development continues to be a key focus for MtronPTI as it continues to push its roadmap to meet the needs of its served markets. Within Frequency Control, design efforts are focused on smaller packages, lower power, and use of new materials to provide compensation and harsh environment performance that surpasses customer requirements. Spectrum Control seeks to develop higher power handling, higher levels of integration and a range of integrated products within the RF subsystem.
Overview of PTF
PTF designs, manufactures and markets for sale time and frequency products. The industries PTF serves include computer networking, satellite earth stations, electric utilities, broadcasting, and telecommunication systems. PTF was originally founded in 2002 and the company's assets were acquired by LGL in September 2016 through a business acquisition, making us a broader-based supplier of highly engineered products for the generation of time and frequency references for synchronization and control. Since its inception, PTF has developed a comprehensive portfolio of time and frequency instruments complemented by a wide range of ancillary products such as distribution amplifiers and redundancy auto switches.
PTF Products
PTF's products range from simple, low cost time and frequency solutions, to premium products designed to deliver maximum performance for the most demanding applications. PTF's products include Frequency and Time Reference Standards, distribution amplifiers, redundancy auto switches and NTP servers, all of which are used in a broad range of applications worldwide.
PTF's Frequency and Time Reference Standards include quartz Frequency Standards, GPS/GNS Frequency and Time Standards and rubidium atomic Frequency Standards. The de facto standard for many highly demanding applications, such as satellite communications, is PTF's range of GPS/GNS disciplined quartz frequency and time standards. Because of the high quality quartz oscillators utilized they deliver outstanding phase noise and short-term stability performance for applications where low noise is paramount. This outstanding short-term performance, coupled with
2
the long-term stability and accuracy of the external GPS/GNS reference, provides the user excellent all-around performance that is highly cost-effective.
When two or more computers are involved, accurate time keeping is a challenge especially when the computers are in different locations. PTF's range of GNS Time and Frequency References and Network Time Servers deliver a high level of performance that allows customers to synchronize to Universal Time Coordinated, in a number of cost- effective forms to meet a multitude of time and frequency reference requirements. Applications range from low phase noise, highly stable and accurate, system frequency references for Sat-Com and Digital Broadcasting applications, to computer networks, shipboard time code references and e-commerce time stamping applications.
PTF's portfolio of distribution amplifiers covers multiple signal types including RF, digital, time code, configurable and optical. The distribution range is designed to complement the high quality of the frequency and time references and provide the most effective cost/performance solution for the application, including options for full remote monitoring/control (including RF analog signal monitoring) and optional level control.
The distribution product range includes standard fixed configuration units with either 12 or 16 channels, together with more flexible units that allow the user to define specific configurations including different types of input/output signals combined into a convenient 1U or 2U package with up to 36 output channels.
PTF's series of redundancy auto switches range from simple level detection through to highly sophisticated sensing capability, extremely fast switching options and full Ethernet connectivity, to provide remote monitoring control, and including integration with SNMP management systems. The most recent model includes multi-channel input capability as well as the ability to switch up to three input types of signals.
Customers
We primarily work directly with original equipment manufacturers (“OEMs”) to define the right solutions for their unique applications, including the design of custom parts with unique part numbers. Actual sales of production parts may be directly to the OEM or through either their designated contract manufacturers or through franchised distributors of our products. As a result, we have highly-skilled sales engineers who work directly with the designers and program managers at their OEMs, providing a high-level of engineering support at all points within the process.
In 2019, our largest customer, an electronics contract manufacturing company in the aerospace and defense markets, accounted for $5,522,000, or 17.3%, of the Company's total revenues, compared to $4,436,000, or 17.8%, in 2018.
As of December 31, 2019, four of our largest customers accounted for approximately $1,841,000, or 40%, of accounts receivable. As of December 31, 2018, four of our largest customers accounted for approximately $1,043,000, or 30%, of accounts receivable. The insolvency of any of these customers could have a material adverse impact on our liquidity.
Research and Development
Utilizing our understanding of market requirements, we employ a disciplined approach to capital allocation when selecting new product development projects. A cross-functional team comprised of engineering, marketing, operations, sales and finance reviews the merits of specific projects, seeking to invest in products that will exceed a specific return on investment level and a payback expectation within one to two years. In addition, the team considers the inherent value of intellectual property that each project presents with consideration for technical roadmap objectives.
Research and development expense was approximately $2,004,000 and $1,947,000 in 2019 and 2018, respectively, and will remain a significant part of the Company's efforts to revitalize our intellectual property position.
Marketing and Sales
We have a highly skilled team of sales engineers who work in tandem with a worldwide network of more than 30 independent external manufacturer representatives and franchised electronics distributors to market and sell our products. An important part of the sales process is gaining qualification of specific products from the OEM, confirming suitability for use in a specific system design, which is commonly referred to as a "design-win." Through direct contact with our clients and through our representative network, we are able to understand the needs of the marketplace and then guide our product development process to allocate resources to meeting those requirements.
3
Seasonality
Our business is not seasonal, although shipment schedules may be affected by the production schedules of our customers or their contract manufacturers based on regional practices or customs.
Domestic Revenues
Our domestic revenues were $23,397,000 in 2019, or 73.4% of total consolidated revenues, compared to $18,673,000, or 75.1% of total consolidated revenues, in 2018.
International Revenues
Our international revenues were $8,500,000 in 2019, or 26.6% of total consolidated revenues, compared to $6,197,000, or 24.9% of total consolidated revenues, in 2018. In each of 2019 and 2018, these revenues were derived mainly from customers in Asia, with significant sales in Malaysia. We avoid significant currency exchange risk by transacting and settling substantially all of our international sales in United States dollars.
Order Backlog
Our order backlog was $21,857,000 and $17,506,000 as of December 31, 2019 and 2018, respectively. The backlog of unfilled orders includes amounts based on signed contracts as well as agreed letters of intent, which we have determined are firm orders and likely to proceed. Although backlog represents only firm orders that are considered likely to be fulfilled within the 12 months following receipt of the order, cancellations or scope adjustments may and do occur.
Order backlog is adjusted quarterly to reflect project cancellations, deferrals, revised project scope and cost. We expect to fill our entire 2019 order backlog in 2020, but cannot provide assurances as to what portion of the order backlog will be fulfilled in a given year
Investment in SPAC
The Company has invested $3.35 million in LGL Systems Acquisition Holding Company, LLC, who serves as the sponsor (the “Sponsor”) of LGL Systems Acquisition Corp., a special purpose acquisition company, commonly referred to as a “SPAC”, or blank check company, formed for the purpose of effecting a business combination in the aerospace, defense and communications industries (the “SPAC”).
The Sponsor holds 20% of the shares in the SPAC along with 5,200,000 warrants at a strike price of $11.50. On November 7, 2019, the SPAC raised $172.5 million through the sale of 17.25 million shares and was listed as a publicly traded company on the NASDAQ Capital Market under the ticker symbol ‘DFNS’. The IPO closed on November 12, 2019. Prior to and immediately following the IPO, the Sponsor held 4,312,500 shares of the SPAC, which are restricted and non-tradable.
If the SPAC does not complete a business combination within 24 months from the closing of the SPAC’s initial public offering, the proceeds from the sale of the private warrants will be used to fund the redemption of the shares sold in the SPAC’s initial public offering (subject to the requirements of applicable law), and the private warrants will expire worthless.
Raw Materials
Generally, most raw materials used in the production of our products are available in adequate supply from a number of sources and the prices of these raw materials are relatively stable. However, some raw materials, including printed circuit boards, quartz and certain metals including steel, aluminum, silver, gold, tantalum and palladium, are subject to greater supply fluctuations and price volatility, as experienced in recent years. In general, we have been able to include some cost increases in our pricing, but in some cases our margins were adversely impacted.
Recently, the outbreak of the novel coronavirus (COVID-19) (the “coronavirus”) has caused a global pandemic that has disrupted supply chains and the ability to obtain components and raw materials around the world for most companies, including us. The short-term and long-term impact of the coronavirus pandemic on our ability to obtain the raw materials necessary to conduct our business and operations is not yet fully understood; however, the inability to obtain the raw materials required for our business would have a material negative effect on our business, results of operations and financial condition.
4
Competition
We design, manufacture and market products for the generation, synchronization and control of time and frequency as well as spectrum control products. There are numerous domestic and international manufacturers who are capable of providing custom-designed products comparable in quality and performance to our products. Our competitive strategy begins with our focus on niche markets where precise specification and reliability are the major requirements. Competitors in our electronic components segment include, but are not limited to, Vectron International (a division of Knowles Corporation), K&L Microwave (a division of Dover Corporation), Symmetricom (a division of Microsemi Corporation), and Rakon Limited. Competitors in our electronic instruments segment include, but are not limited to, Symmetricom, Spectracom Corporation and Brandywine Communications.
Shelf Offering and ATM
The Company filed a shelf registration statement on Form S-3 (File No. 333-235767), as filed by the Company with the SEC on December 31, 2019, relating to $90,000,000 of its securities, which was declared effective on January 8, 2020.
On January 22, 2020, the Company entered into an Open Market Sale Agreement (the “Agreement”) with Jefferies LLC, as sales agent (“Jefferies”), pursuant to which the Company may offer and sell, from time to time, through Jefferies, shares of the Company’s common stock, par value $0.01 per share, having an aggregate offering price of up to $15,000,000 (the “Shares”). Shares sold under the Agreement will be issued pursuant to the shelf registration statement. The Company filed a prospectus supplement with the SEC on January 23, 2020 in connection with the offer and sale of the common shares pursuant to the Agreement.
The Company is not obligated to sell any Shares under the Agreement. Subject to the terms and conditions of the Agreement, Jefferies will use commercially reasonable efforts, consistent with its normal trading and sales practices and applicable laws and regulations, to sell Shares from time to time based upon the Company’s instructions, including any price, time or size limits specified by the Company, subject to certain limitations. Under the Agreement, Jefferies may sell the Shares by any method permitted by law deemed to be an “at the market offering” as defined in Rule 415(a)(4) under the Securities Act of 1933, as amended, including block transactions, sales made directly on the NYSE American or sales made into any other existing trading market of the Company’s common stock.
Through the date of this report, there have been 263,725 shares sold under this Agreement, at an average price per share of $13.65 and generating net proceeds of approximately $3,491,000.
Intellectual Property
We have no patents, trademarks or licenses that are considered to be significant to our business or operations. Rather, we believe that our technological position depends primarily on the technical competence and creative ability of our engineering and technical staff in areas of product design and manufacturing processes, including our staff’s ability to customize products to meet difficult specifications, as well as proprietary know-how and information.
Employees
As of December 31, 2019, we employed 353 people, including 183 full-time, and 10 part-time employees, along with 160 contractors. Of this total, the Company has 173 full-time, 9 part-time, and three contract employees within the U.S., with 139 located in Orlando, Florida, 41 in Yankton, South Dakota, and five within its subsidiary PTF in Wakefield, Massachusetts. The Company has two full-time and one part-time employee in Hong Kong, and eight full-time employees and 157 contractors in Noida, India. None of the Company's employees are represented by a labor union and the Company considers its relationships with employees to be good.
As an engineered products and solutions company, a significant number of our workforce consists of degreed engineers offering their expertise to product design and process development.
Environmental
Our manufacturing operations, products, and/or product packaging are subject to environmental laws and regulations governing air emissions, wastewater discharges, and the handling, disposal and remediation of hazardous substances, wastes and other chemicals. In addition, more stringent environmental regulations may be enacted in the future, both within the United States and internationally, and we cannot presently determine the modifications, if any, in our
5
operations that any future regulations might require, or the cost of compliance that would be associated with these regulations.
To date, capital expenditures, earnings and competitive position of the Company have not been materially affected by compliance with current federal, state, and local laws and regulations (domestic and foreign) relating to the protection of the environment. However, we cannot predict the effect of future laws and regulations.
Investing in our securities involves risks. Before making an investment decision, you should carefully consider the risks described below. Any of these risks could result in a material adverse effect on our business, financial condition, results of operations, or prospects, and could cause the trading price of our securities to decline, resulting in a loss of all or part of your investment. The risks and uncertainties described below are not the only ones we face, but represent those risks and uncertainties that we believe are material to our business, operating results, prospects and financial condition. Additional risks and uncertainties not presently known to us or that we currently deem immaterial may also harm our business.
Risks Related to Our Business and Industry
We are dependent on a single line of business.
Prior to our September 2016 acquisition of PTF, we were engaged only in the design, manufacture and marketing of standard and custom-engineered electronic components that are used primarily to control the frequency or timing of signals in electronic circuits. Although our acquisition of PTF added an additional product line of electronic instruments that includes highly engineered products for the generation of time and frequency references for synchronization and control, until we see significant growth from the PTF electronic instruments product line or develop or acquire additional product lines, we will remain dependent on our electronic components line of business. Virtually all of our 2019 and 2018 revenues came from sales of electronic components, which consist of packaged quartz crystals, oscillator modules, electronic filters and integrated modules. We expect that this product line will continue to account for substantially all of our revenues in 2020.
Given our reliance on this single line of business, any decline in demand for this product line or failure to achieve continued market acceptance of existing and new versions of this product line may harm our business and our financial condition. Additionally, unfavorable market conditions affecting this line of business would likely have a disproportionate impact on us in comparison with certain competitors, who have more diversified operations and multiple lines of business. Should this line of business fail to generate sufficient sales to support ongoing operations, there can be no assurance that we will be able to develop alternate business lines.
Our operating results vary significantly from period to period.
We experience fluctuations in our operating results. Some of the principal factors that contribute to these fluctuations include: changes in demand for our products; our effectiveness in managing manufacturing processes, costs and inventory; our effectiveness in engineering and qualifying new product designs with our OEM customers and in managing the risks associated with offering those new products into production; changes in the cost and availability of raw materials, which often occur in the electronics manufacturing industry and which affect our margins and our ability to meet delivery schedules; macroeconomic and served industry conditions; and events that may affect our production capabilities, such as labor conditions and political instability. In addition, due to the prevailing economic climate and competitive differences between the various market segments which we serve, the mix of sales between our communications, networking, aerospace, defense, industrial and instrumentation market segments may affect our operating results from period to period.
For the years ended December 31, 2019 and 2018, we had net income of approximately $7,016,000 and $1,405,000, respectively. Our revenues are derived primarily from MtronPTI, whose future rate of growth and profitability are highly dependent on the development and growth of demand for our products in the communications, networking, aerospace, defense, instrumentation and industrial markets, which are cyclical. We cannot be certain whether we will generate sufficient revenues or sufficiently manage expenses to sustain profitability.
6
We have a large customer that accounts for a significant portion of our revenues, and the loss of this customer, or decrease in its demand for our products, could have a material adverse effect on our results.
In 2019, our largest customer, an electronics contract manufacturing company, accounted for $5,522,000, or 17.3%, of the Company's total revenues, compared to $4,436,000, or 17.8%, in 2018. The Company’s second largest customer, a defense contract manufacturer, accounted for $3,187,000, or 10.0%, of the Company's total revenues, compared to $1,617,000, or 7.2%, in 2018. The loss of either of these customers, or a decrease in their demand for our products, could have a material adverse effect on our results.
A relatively small number of customers account for a significant portion of our accounts receivable, and the insolvency of any of these customers could have a material adverse impact on our liquidity.
As of December 31, 2019, four of our largest customers accounted for approximately $1,841,000, or 40%, of accounts receivable. As of December 31, 2018, four of our largest customers accounted for approximately $1,043,000, or 30%, of accounts receivable. The insolvency of any of these customers could have a material adverse impact on our liquidity.
Our order backlog may not be indicative of future revenues.
Our order backlog is comprised of orders that are subject to specific production release, orders under written contracts, oral and written orders from customers with which we have had long-standing relationships and written purchase orders from sales representatives. Our customers may order products from multiple sources to ensure timely delivery when backlog is particularly long and may cancel or defer orders without significant penalty. They also may cancel orders when business is weak and inventories are excessive. As a result, we cannot provide assurances as to the portion of backlog orders to be filled in a given year, and our order backlog as of any particular date may not be representative of actual revenues for any subsequent period.
We are a holding company, and therefore are dependent upon the operations of our subsidiaries to meet our obligations.
We are a holding company that transacts business through our operating subsidiaries. Our primary assets are cash and cash equivalents, marketable securities, the shares of our operating subsidiaries and intercompany loans. Should our cash and cash equivalents be depleted, our ability to meet our operating requirements and to make other payments will depend on the surplus and earnings of our subsidiaries and their ability to pay dividends or to advance or repay funds.
Our future rate of growth and profitability are highly dependent on the development and growth of the communications, networking, aerospace, defense, instrumentation and industrial markets, which are cyclical.
In 2019 and 2018, the majority of our revenues were derived from sales to manufacturers of equipment for the defense, aerospace, instrumentation and industrial markets for frequency and spectrum control devices, including indirect sales through distributors and contract manufacturers. During 2020, we expect a significant portion of our revenues to continue to be derived from sales to these manufacturers. Often OEMs and other service providers within these markets have experienced periods of capacity shortage and periods of excess capacity, as well as periods of either high or low demand for their products. In periods of excess capacity or low demand, purchases of capital equipment may be curtailed, including equipment that incorporates our products. A reduction in demand for the manufacture and purchase of equipment for these markets, whether due to cyclical, macroeconomic or other factors, or due to our reduced ability to compete based on cost or technical factors, could substantially reduce our net sales and operating results and adversely affect our financial condition. Moreover, if these markets fail to grow as expected, we may be unable to maintain or grow our revenues. The multiple variables which affect the communications, networking, aerospace, defense, instrumentation and industrial markets for our products, as well as the number of parties involved in the supply chain and manufacturing process, can impact inventory levels and lead to supply chain inefficiencies. As a result of these complexities, we have limited visibility to forecast revenue projections accurately for the near and medium-term timeframes.
The market share of our customers in the communications, networking, aerospace, defense, instrumentation and industrial markets may change over time, reducing the potential value of our relationships with our existing customer base.
We have developed long-term relationships with our existing customers, including pricing contracts, custom designs and approved vendor status. If these customers lose market share to other equipment manufacturers in the
7
communications, networking, aerospace, defense, instrumentation and industrial markets with whom we do not have similar relationships, our ability to maintain revenue, margin or operating performance may be adversely affected.
We may make acquisitions that are not successful, or we may fail to integrate acquired businesses into our operations properly.
We intend to continue exploring opportunities to buy other businesses or technologies that could complement, enhance, or expand our current business or product lines, or that might otherwise offer us growth opportunities. We may have difficulty finding such opportunities or, if such opportunities are identified, we may not be able to complete such transactions for reasons including a failure to secure necessary financing.
Any transactions that we are able to identify and complete may involve a number of risks, including:
‒
|
The diversion of our management's attention from the management of our existing business to the integration of the operations and personnel of the acquired or combined business or joint venture;
|
‒
|
Material business risks not identified in due diligence;
|
‒
|
Possible adverse effects on our operating results during the integration process;
|
‒
|
Substantial acquisition-related expenses, which would reduce our net income, if any, in future years;
|
‒
|
The loss of key employees and customers as a result of changes in management; and
|
‒
|
Our possible inability to achieve the intended objectives of the transaction.
|
In addition, we may not be able to integrate, operate, maintain or manage, successfully or profitably, our newly acquired operations or employees. We may not be able to maintain uniform standards, controls, policies and procedures, and this may lead to operational inefficiencies.
Any of these difficulties could have a material adverse effect on our business, financial condition, results of operations and cash flows.
If we are unable to introduce innovative products, demand for our products may decrease.
Our future operating results are dependent on our ability to develop, introduce and market innovative products continually, to modify existing products, to respond to technological change and to customize some of our products to meet customer requirements. There are numerous risks inherent in this process, including the risks that we will be unable to anticipate the direction of technological change or that we will be unable to develop and market new products and applications in a timely or cost-effective manner to satisfy customer demand.
Our markets are highly competitive, and we may lose business to larger and better-financed competitors.
Our markets are highly competitive worldwide, with low transportation costs and few import barriers. We compete principally on the basis of product quality and reliability, availability, customer service, technological innovation, timely delivery and price. Within the industries in which we compete, competition has become increasingly concentrated and global in recent years.
Many of our major competitors, some of which are larger than us, and potential competitors have substantially greater financial resources and more extensive engineering, manufacturing, marketing and customer support capabilities. If we are unable to successfully compete against current and future competitors, our operating results will be adversely affected.
Our success depends on our ability to retain key management and technical personnel and attracting, retaining, and training new technical personnel.
Our future growth and success will depend in large part upon our ability to recruit highly-skilled technical personnel, including engineers, and to retain our existing management and technical personnel. The labor markets in which we operate are highly competitive and some of our operations are not located in highly populated areas. As a result, we may not be able to recruit and retain key personnel. Our failure to hire, retain or adequately train key personnel could have a negative impact on our performance.
We purchase certain key components and raw materials from single or limited sources and could lose sales if these sources fail to fulfill our needs for any reason, including the inability to obtain these key components or raw materials due to the recent novel coronavirus (COVID-19) outbreak.
If single-source components or key raw materials were to become unavailable on satisfactory terms, and we could not obtain comparable replacement components or raw materials from other sources in a timely manner, our business, results of operations and financial condition could be harmed. On occasion, one or more of the components used in our
8
products have become unavailable, resulting in unanticipated redesign and related delays in shipments. Recently, the coronavirus outbreak has caused a global pandemic that has disrupted supply chains and the ability to obtain components and raw materials around the world for all companies, including us. We cannot give assurance that we will be able to obtain the necessary components and raw materials necessary to conduct our business during the coronavirus pandemic, and we also cannot give assurance that similar delays will not occur in the future. In addition, our suppliers may be impacted by compliance with environmental regulations including RoHS and Waste Electrical and Electronic Equipment ("WEEE"), which could disrupt the supply of components or raw materials or cause additional costs for us to implement new components or raw materials into our manufacturing processes.
As a supplier to U.S. Government defense contractors, we are subject to a number of procurement regulations and other requirements and could be adversely affected by changes in regulations or any negative findings from a U.S. Government audit or investigation.
A number of our customers are U.S. Government contractors. As one of their suppliers, we must comply with significant procurement regulations and other requirements. We also maintain registration under the International Traffic in Arms Regulations for all of our production facilities. One of those production facilities must comply with additional requirements and regulations for its production processes and for selected personnel in order to maintain the security of classified information. These requirements, although customary within these markets, increase our performance and compliance costs. If any of these various requirements change, our costs of complying with them could increase and reduce our operating margins.
We operate in a highly regulated environment and are routinely audited and reviewed by the U.S. Government and its agencies such as the Defense Contract Audit Agency and Defense Contract Management Agency. These agencies review our performance under our contracts, our cost structure and our compliance with applicable laws, regulations, and standards, as well as the adequacy of, and our compliance with, our internal control systems and policies. Systems that are subject to review include our purchasing systems, billing systems, property management and control systems, cost estimating systems, compensation systems and management information systems.
Any costs found to be improperly allocated to a specific contract will not be reimbursed or must be refunded if already reimbursed. If an audit uncovers improper or illegal activities, we may be subject to civil and criminal penalties and administrative sanctions, which may include termination of contracts, forfeiture of profits, suspension of payments, fines and suspension, or prohibition from doing business as a supplier to contractors who sell products and services to the U.S. Government. In addition, our reputation could be adversely affected if allegations of impropriety were made against us.
From time to time, we may also be subject to U.S. Government investigations relating to our or our customers' operations and products, and are expected to perform in compliance with a vast array of federal laws, including the Truth in Negotiations Act, the False Claims Act, the International Traffic in Arms Regulations promulgated under the Arms Export Control Act, and the Foreign Corrupt Practices Act. We or our customers may be subject to reductions of the value of contracts, contract modifications or termination, and the assessment of penalties and fines, which could negatively impact our results of operations and financial condition, or result in a diminution in revenue from our customers, if we or our customers are found to have violated the law or are indicted or convicted for violations of federal laws related to government security regulations, employment practices or protection of the environment, or are found not to have acted responsibly as defined by the law. Such convictions could also result in suspension or debarment from serving as a supplier to government contractors for some period of time. Such convictions or actions could have a material adverse effect on us and our operating results. The costs of cooperating or complying with such audits or investigations may also adversely impact our financial results.
Our operating subsidiaries do not have available lines of credit to fund their businesses.
Our operating subsidiaries do not have access to any bank credit facilities and rely on the holding company for financial support in the event their operations require cash to operate or expand their businesses.
Our products are complex and may contain errors or design flaws, which could be costly to correct.
When we release new products, or new versions of existing products, they may contain undetected or unresolved errors or defects. The vast majority of our products are custom-designed for requirements of specific OEM systems. The expected business life of these products ranges from less than one year to more than 10 years depending on the application. Some of the customizations are modest changes to existing product designs while others are major product redesigns or new product platforms.
9
Despite testing, errors or defects may be found in new products or upgrades after the commencement of commercial shipments. Undetected errors and design flaws have occurred in the past and could occur in the future. These errors could result in delays, loss of market acceptance and sales, diversion of development resources, damage to the Company's reputation, product liability claims and legal action by its customers and third parties, failure to attract new customers and increased service costs.
Communications and network infrastructure equipment manufacturers increasingly rely upon contract manufacturers, thereby diminishing our ability to sell our products directly to those equipment manufacturers.
There is a continuing trend among communications and network infrastructure equipment manufacturers to outsource the manufacturing of their equipment or components. As a result, our ability to persuade these OEMs to utilize our products in customer designs could be reduced and, in the absence of a manufacturer's specification of our products, the prices that we can charge for them may be subject to greater competition.
Future changes in our environmental liability and compliance obligations may increase costs and decrease profitability.
Our present and past manufacturing operations, products, and/or product packaging are subject to environmental laws and regulations governing air emissions, wastewater discharges, and the handling, disposal and remediation of hazardous substances, wastes and other chemicals. In addition, more stringent environmental regulations may be enacted in the future, and we cannot presently determine the modifications, if any, in our operations that any future regulations might require, or the cost of compliance that would be associated with these regulations.
Environmental laws and regulations may cause us to change our manufacturing processes, redesign some of our products, and change components to eliminate some substances in our products in order to be able to continue to offer them for sale.
We have significant international operations and sales to customers outside of the United States that subject us to certain business, economic and political risks.
We have office and manufacturing space in Noida, India, and a sales office in Hong Kong. Additionally, foreign revenues for 2019 and 2018 (primarily to Malaysia) accounted for 26.6% and 24.9% of our 2019 and 2018 consolidated revenues, respectively. We anticipate that sales to customers located outside of the United States will continue to be a significant part of our revenues for the foreseeable future. Our international operations and sales to customers outside of the United States subject our operating results and financial condition to certain business, economic, political, health, regulatory and other risks, including but not limited to:
‒
|
Political and economic instability in countries in which our products are manufactured and sold;
|
‒
|
Expropriation or the imposition of government controls;
|
‒
|
Responsibility to comply with anti-bribery laws such as the U.S. Foreign Corrupt Practices Act and similar anti-bribery laws in other jurisdictions;
|
‒
|
Sanctions or restrictions on trade imposed by the United States government;
|
‒
|
Export license requirements;
|
‒
|
Currency controls or fluctuations in exchange rates;
|
‒
|
High levels of inflation or deflation;
|
‒
|
Difficulty in staffing and managing non-U.S. operations
|
‒
|
Greater difficulty in collecting accounts receivable and longer payment cycles;
|
‒
|
Changes in labor conditions and difficulties in staffing and managing international operations; and
|
‒
|
The impact of the current coronavirus outbreak; and
|
‒
|
Limitations on insurance coverage against geopolitical risks, natural disasters and business operations.
|
Additionally, to date, very few of our international revenue and cost obligations have been denominated in foreign currencies. As a result, changes in the value of the United States dollar relative to foreign currencies may affect our competitiveness in foreign markets. We do not currently engage in foreign currency hedging activities, but may do so in the future to the extent that we incur a significant amount of foreign-currency denominated liabilities.
Our business and operations may be adversely affected by the recent coronavirus outbreak or other similar outbreaks.
We derive a significant portion of our consolidated revenues from products that are manufactured and form part of our supply chain within our international operations. We have office and manufacturing space in Noida, India, and a sales
10
office in Hong Kong. As a result of the recent coronavirus outbreak, first identified in Wuhan, Hubei Province, China, and increasingly in other locations, or other adverse public health developments, our international operations, and those of our customers and suppliers, may experience delays or disruptions, such as difficulty obtaining raw materials, logistics and supply-chain problems, and temporary suspensions of operations. In addition, our financial condition and results of operations may be adversely affected by the coronavirus outbreak.
In addition, the timeline and potential magnitude of the coronavirus outbreak is currently unknown. This disease has already resulted in a widespread health crisis that has adversely affected the economies and financial markets of many countries, resulting in an economic downturn that could affect demand for our products and our operating results. The continuation or amplification of this disease over a longer period of time would have increasing adverse effects on the global economy, as well as our business, financial condition and results of operations.
We rely on information technology systems to conduct our business, and disruption, failure or security breaches of these systems could adversely affect our business and results of operations.
We rely on information technology ("IT") systems in order to achieve our business objectives. We also rely upon industry accepted security measures and technology to securely maintain confidential information maintained on our IT systems. However, our portfolio of hardware and software products, solutions and services and our enterprise IT systems may be vulnerable to damage or disruption caused by circumstances beyond our control such as catastrophic events, power outages, natural disasters, computer system or network failures, computer viruses, cyber-attacks or other malicious software programs. The failure or disruption of our IT systems to perform as anticipated for any reason could disrupt our business and result in decreased performance, significant remediation costs, transaction errors, loss of data, processing inefficiencies, downtime, litigation and the loss of suppliers or customers. A significant disruption or failure could have a material adverse effect on our business operations, financial performance and financial condition.
Cybersecurity risks and cyber incidents may adversely affect our business by causing a disruption to our operations, a compromise or corruption of our confidential information, and/or damage to our business relationships, all of which could negatively impact our financial results.
A cyber incident is considered to be any adverse event that threatens the confidentiality, integrity or availability of our information resources. These incidents may be an intentional attack or an unintentional event and could involve gaining unauthorized access to our information systems for purposes of misappropriating assets, stealing confidential information, corrupting data or causing operational disruption. The result of these incidents may include disrupted operations, misstated or unreliable financial data, liability for stolen assets or information, increased cybersecurity protection and insurance costs, litigation and damage to our tenant and investor relationships. As our reliance on technology increases, so will the risks posed to our information systems, both internal and those we outsource. There is no guarantee that any processes, procedures and internal controls we have implemented or will implement will prevent cyber intrusions, which could have a negative impact on our financial results, operations, business relationships or confidential information.
In connection with the preparation of our annual financial statements for the fiscal year ended December 31, 2019, we identified a material weakness in our internal control over financial reporting. Any failure to maintain effective internal control over financial reporting could harm us.
Our management is responsible for establishing and maintaining adequate internal control over financial reporting. Internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements in accordance with U.S. generally accepted accounting principles. In connection with our audit of the fiscal year ended December 31, 2019, we identified a material weakness in our internal controls over financial reporting regarding our ineffective controls over a significant transaction in connection with the investment in an unconsolidated subsidiary. A material weakness is a deficiency, or combination of deficiencies, in internal control over financial reporting such that there is a reasonable possibility that a material misstatement of annual or interim financial statements will not be prevented or detected and corrected on a timely basis. This control deficiency resulted in misstatements relating to the treatment of our investment in an unconsolidated subsidiary, which was corrected prior to the issuance of our financial statements as of and for the year ended December 31, 2019 included in this annual report on Form 10-K. As this deficiency created a reasonable possibility that a material misstatement would not be prevented or detected in a timely basis, management concluded that the control deficiency represented a material weakness and accordingly our internal control over financial reporting was not effective as of December 31, 2019.
11
We are still considering the full extent of the procedures to implement in order to remediate the material weakness described above; however, the current remediation plan includes implementing controls over calculations and conclusions associated with non-routine transactions at a more precise level of operation. We cannot assure you that any of our remedial measures will be effective in resolving this material weakness or that we will not suffer from other material weaknesses in the future.
If our management is unable to conclude that we have effective internal control over financial reporting, or to certify the effectiveness of such controls, or if additional material weaknesses in our internal controls are identified in the future, we could be subject to regulatory scrutiny and a loss of public confidence, which could have a material adverse effect on our business and our stock price. In addition, if we do not maintain adequate financial and management personnel, processes and controls, we may not be able to manage our business effectively or accurately report our financial performance on a timely basis, which could cause a decline in our common stock price and adversely affect our results of operations and financial condition.
Risks Related to Our Investments
We have made a significant investment in a subsidiary that is the sponsor of a blank check company commonly referred to as a special purpose acquisition company (“SPAC”), and will suffer the loss of all of our investment if the SPAC does not complete an acquisition within 2 years.
In November 2019, we invested $3.35 million into a subsidiary that is obligated as the sponsor of LGL Systems Acquisition Corp (NYSE: DFNS), a blank check company. Prior to a business combination, the Sponsor holds 100% of the B shares outstanding of DFNS. The B shares equal 20% of the outstanding common stock of DFNS. Upon the successful completion of an acquisition the proforma ownership of the new company will vary depending on the business combination terms.
The Company is expected to own approximately a 43.57% interest in the sponsor through its direct investment. Assuming the terms of the business combination are identical in capital structure as that of DFNS, the Company anticipates its economic interest will include approximately 8.7% of the SPAC’s pro-forma equity immediately following a successful business combination. There can be no assurances that this scenario and the resulting ownership will manifest, as changes may be made depending upon business combination terms.
There is no assurance that the SPAC will be successful in completing a business combination or that any business combination will be successful. The Company can lose its entire investment in the SPAC if a business combination is not completed within 24 months or if the business combination is not successful, which may adversely impact our stockholder value.
Risks Related to Our Securities
The price of our common stock has fluctuated considerably and is likely to remain volatile, in part due to the limited market for our common stock.
From January 1, 2019 through December 31, 2019, the high and low closing sales prices for our common stock were $15.86 and $6.00, respectively, and the average daily trading volume in our common stock during that time period was approximately 16,400 shares per day. There is a limited public market for our common stock, and we cannot provide assurances that a more active trading market will develop or be sustained. As a result of limited trading volume in our common stock, the purchase or sale of a relatively small number of shares could result in significant price fluctuations and it may be difficult for holders to sell their shares without depressing the market price for our common stock.
Additionally, the market prices of our common stock may continue to fluctuate significantly in response to a number of factors, some of which are beyond our control, including the following:
‒
|
General economic conditions affecting the availability of long-term or short-term credit facilities, the purchasing and payment patterns of our customers, or the requirements imposed by our suppliers;
|
‒
|
Economic conditions in our industry and in the industries of our customers and suppliers;
|
‒
|
Changes in financial estimates or investment recommendations by securities analysts relating to our common stock;
|
‒
|
Market reaction to our reported financial results;
|
‒
|
Loss of a major customer;
|
‒
|
Announcements by us or our competitors of significant contracts, acquisitions, strategic partnerships, joint ventures or capital commitments; and
|
12
‒
|
Changes in key personnel.
|
Our officers, directors and 10% stockholders have significant voting power and may vote their shares in a manner that is not in the best interest of other stockholders.
Our officers, directors and 10% or greater stockholders control approximately 38.3% of the voting power represented by our outstanding shares of common stock as of March 27, 2020. If these stockholders act together, they may be able to exert significant control over our management and affairs requiring stockholder approval, including approval of significant corporate transactions. This concentration of ownership may have the effect of delaying or preventing a change in control and might adversely affect the market price of our common stock. This concentration of ownership may not be in the best interests of all of our stockholders.
Provisions in our corporate charter documents and under Delaware law could make an acquisition of the Company, which may be beneficial to our stockholders, more difficult.
Provisions in our certificate of incorporation and by-laws, as well as provisions of the General Corporation Law of the State of Delaware ("DGCL"), may discourage, delay or prevent a merger, acquisition or other change in control of the Company, even if such a change in control would be beneficial to our stockholders. These provisions include prohibiting our stockholders from fixing the number of directors, and establishing advance notice requirements for stockholder proposals that can be acted on at stockholder meetings and nominations to our board of directors (the "Board").
Additionally, Section 203 of the DGCL prohibits a person who owns in excess of 15% of our outstanding voting stock from merging or combining with us for a period of three years after the date of the transaction in which the person acquired in excess of 15% of our outstanding voting stock, unless the merger or combination is approved in a prescribed manner. We have not opted out of the restrictions under Section 203, as permitted under DGCL.
Item 1B.
|
Unresolved Staff Comments.
|
None.
The Company's principal executive offices are located in Orlando, Florida within an MtronPTI operating facility. MtronPTI's operations are located in Orlando, Florida; Yankton, South Dakota; and Noida, India. PTF's operations are located in Wakefield, Massachusetts. We also have sales offices in Sacramento, California; Austin, Texas; and Hong Kong.
MtronPTI owns a facility in Orlando, Florida, containing approximately 71,000 square feet on approximately five acres of land. MtronPTI owns a facility in Yankton, South Dakota, containing approximately 32,000 square feet on approximately 11 acres of land. MtronPTI also leases approximately 13,000 square feet of office and manufacturing space in Noida, India. PTF leases approximately 3,600 square feet of office and manufacturing space in Wakefield, Massachusetts. We also lease approximately 700 square feet of office space in Hong Kong and approximately 400 square feet of office space in Sacramento, California. It is our opinion that the facilities referred to above are in good operating condition, suitable, and adequate for present uses.
Item 3.
|
Legal Proceedings.
|
None.
Item 4.
|
Mine Safety Disclosures.
|
Not applicable.
13
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
A. Accounting and Reporting Policies
Organization
The LGL Group, Inc. (the "Company"), incorporated in 1928 under the laws of the State of Indiana and reincorporated under the laws of the State of Delaware in 2007, is a diversified holding company with subsidiaries engaged in the design, manufacturing and marketing of highly-engineered, high reliability frequency and spectrum control products used to control the frequency or timing of signals in electronic circuits and in the design of high performance Frequency and Time Reference Standards that form the basis for timing and synchronization in various applications.
As of December 31, 2019, the subsidiaries of the Company are as follows:
|
|
Owned By
The LGL
Group, Inc.
|
|
LGL Systems Acquisition Holding Company, LLC
|
*
|
|
62.2
|
%
|
M-tron Systems Holdings, LLC
|
|
|
100.0
|
%
|
M-tron Industries, Inc.
|
|
|
100.0
|
%
|
Piezo Technology, Inc.
|
|
|
100.0
|
%
|
Piezo Technology India Private Ltd.
|
|
|
99.9
|
%
|
M-tron Asia, LLC
|
|
|
100.0
|
%
|
M-tron Industries, Ltd.
|
|
|
100.0
|
%
|
GC Opportunities Ltd.
|
|
|
100.0
|
%
|
M-tron Services, Ltd.
|
|
|
100.0
|
%
|
Precise Time and Frequency, LLC
|
|
|
100.0
|
%
|
Lynch Systems, Inc.
|
|
|
100.0
|
%
|
* - Accounted for as an equity method investment
|
|
|
|
|
The Company operates through its two principal subsidiaries, M-tron Industries, Inc. ("MtronPTI"), which includes the operations of Piezo Technology, Inc. ("PTI") and M-tron Asia, LLC ("Mtron"), and Precise Time and Frequency, LLC ("PTF"). The Company has operations in Orlando, Florida; Yankton, South Dakota; Wakefield, Massachusetts; and Noida, India. MtronPTI also has sales offices in Sacramento, California; Austin, Texas; and Hong Kong.
The Company added three subsidiaries as part of an effort to reorganize the subsidiaries and to plan potential available strategies for investments or acquisitions. These were Mtron Systems Holdings, LLC, LGL Systems Acquisition Holdings Company, LLC (formerly: Mtron Systems Acquisition Holdings Company, LLC), and LGL Systems Acquisition Corp. (formerly: Mtron Systems Acquisition Corp.). Mtron Systems Holdings, LLC is an intermediate holding company set up to hold the assets and entities under MTron Industries, Inc. LGL Systems Acquisition Holding Company, LLC is the sponsor (the “Sponsor”) of LGL Systems Acquisition Corp., a special purpose acquisition company, commonly referred to as a “SPAC”, or blank check company, formed for the purpose of effecting a business combination in the aerospace, defense and communications industries (the “SPAC”). On November 7, 2019, the SPAC was deconsolidated as a result of an initial public offering (the “SPAC IPO”) which raised $172.5 million from outside investors (See note C).
Principles of Consolidation
The consolidated financial statements include the accounts of the Company and entities for which it has control. Material intercompany transactions and accounts have been eliminated in consolidation.
The Company consolidates entities in which the Company has a controlling financial interest. The Company determines whether it has a controlling financial interest in an entity by first evaluating whether the entity is a variable interest entity (VIE).
A variable interest in a VIE is an investment that will absorb portions of the VIE’s expected losses and/or receive portions of the VIE’s expected residual returns. The Company’s variable interests in VIEs include limited membership interests and common equity.
36
VIE Consolidation Analysis
The enterprise with a controlling financial interest in a VIE is known as the primary beneficiary and consolidates the VIE. The Company determines whether it is the primary beneficiary of a VIE by performing an analysis that principally considers:
|
•
|
Which variable interest holder has the power to direct the activities of the VIE that most significantly impact the VIE’s economic performance;
|
|
•
|
Which variable interest holder has the obligation to absorb losses or the right to receive benefits from the VIE that could potentially be significant to the VIE;
|
|
•
|
The VIE’s purpose and design, including the risks the VIE was designed to create and pass through to its variable interest holders;
|
|
•
|
The VIE’s capital structure;
|
|
•
|
The terms between the VIE and its variable interest holders and other parties involved with the VIE; and
|
|
•
|
Related-party relationships.
|
The Company reassesses its evaluation of whether an entity is a VIE when certain reconsideration events occur. The Company reassesses its determination of whether it is the primary beneficiary of a VIE on an ongoing basis based on current facts and circumstances.
Equity-Method Investments: When the Company does not have a controlling financial interest in an entity but can exert significant influence over the entity’s operating and financial policies, the investment is accounted for either (i) under the equity method of accounting or (ii) at fair value by electing the fair value option available under U.S. generally accepted accounting principles (“GAAP”). Significant influence generally exists when the Company owns 20% to 50% of the entity’s common stock or in-substance common stock.
Uses of Estimates
The preparation of the consolidated financial statements in conformity with GAAP requires management to make estimates and assumptions that affect the amounts reported in the financial statements and accompanying notes. Actual results could differ from those estimates.
Cash and Cash Equivalents
Cash and cash equivalents consist of highly-liquid investments with no maturity or with a maturity of less than three months when purchased.
Marketable Securities
Marketable equity securities are categorized as available-for-sale securities and are reported at fair value, with the change in fair value being recorded in the consolidated statement of operations.
Accounts Receivable
Accounts receivable, on a consolidated basis, consists principally of amounts due from both domestic and foreign customers. Credit is extended based on an evaluation of the customer's financial condition and collateral is not required. In relation to export sales, the Company requires letters of credit supporting a significant portion of the sales price prior to production to limit exposure to credit risk. Certain credit sales are made to industries that are subject to cyclical economic changes.
The Company maintains allowances for doubtful accounts for estimated losses resulting from the inability of its customers to make required payments. These allowances are maintained at a level that management believes is sufficient to cover potential credit losses. Estimates are based on historical collection experience, current trends, credit policy and the relationship between accounts receivable and revenues. In determining these estimates, the Company examines historical write-offs of its receivables and reviews each customer's account to identify any specific customer collection issues. If the financial condition of its customers were to deteriorate, resulting in an impairment of their ability to make payment, additional allowances might be required.
37
Inventories
Inventories are valued at the lower of cost or net realizable value using the FIFO (first-in, first-out) method.
The Company maintains a reserve for inventory based on estimated losses that result from inventory that becomes obsolete or for which the Company has excess inventory levels as of period end. In determining these estimates, the Company performs an analysis on current demand and usage for each inventory item over historical time periods. Based on that analysis, the Company reserves a percentage of the inventory amount within each time period based on historical demand and usage patterns of specific items in inventory.
Property, Plant and Equipment, Net
Property, plant and equipment are recorded at cost less accumulated depreciation and include expenditures for major improvements. Maintenance and repairs are charged to operations as incurred. Depreciation is computed for financial reporting purposes using the straight-line method over the estimated useful lives of the assets, which range from 5 years to 35 years for buildings and improvements, and from 3 to 10 years for other fixed assets. Property, plant and equipment are periodically reviewed for indicators of impairment. If any such indicators were noted, the Company would assess the appropriateness of the assets' carrying value and record any impairment at that time.
Depreciation expense from operations was approximately $418,000 for 2019 and $417,000 for 2018.
Warranties
The Company offers a standard one-year warranty. The Company tests its products prior to shipment in order to ensure that they meet each customer's requirements based upon specifications received from each customer at the time its order is received and accepted. The Company's customers may request to return products for various reasons, including, but not limited to, the customers' belief that the products are not performing to specification. The Company's return policy states that it will accept product returns only with prior authorization and if the product does not meet customer specifications, in which case the product would be replaced or repaired. To accommodate the Company's customers, each request for return is reviewed, and if and when it is approved, a return materials authorization ("RMA") is issued to the customer.
Each month, the Company records a specific warranty reserve for approved RMAs covering products that have not yet been returned. The Company does not maintain a general warranty reserve because, historically, valid warranty returns resulting from a product not meeting specifications or being non-functional have been de minimis. As of December 31, 2019 and 2018, accrued warranty expense was $29,000 and $28,000, respectively.
Intangible Assets
Intangible assets are recorded at cost less accumulated amortization. Amortization is computed for financial reporting purposes using the straight-line method over the estimated useful lives of the assets, which range up to 10 years. The intangible assets consist of intellectual property and goodwill. The net carrying value of the amortizable intangible assets was $362,000 and $437,000 as of December 31, 2019 and 2018, respectively. Goodwill, which is not amortizable, was $40,000 as of December 31, 2019 and 2018.
The estimated aggregate amortization expense for intangible assets, excluding goodwill, for each of the remaining years of the estimated useful life is as follows (in thousands):
2020
|
|
$
|
75
|
|
2021
|
|
|
75
|
|
2022
|
|
|
75
|
|
2023
|
|
|
75
|
|
2024
|
|
|
62
|
|
Total
|
|
$
|
362
|
|
Revenue Recognition
The Company recognizes revenue from the sale of its products in accordance with the criteria in Accounting Standards Codification (“ASC”) 606, Revenue from Contracts with Customers, which are:
Step 1: Identify the contract(s) with a customer.
Step 2: Identify the performance obligations in the contract.
38
Step 3: Determine the transaction price.
Step 4: Allocate the transaction price to the performance obligations in the contract.
Step 5: Recognize revenue when (or as) the entity satisfies a performance obligation.
The Company meets these conditions upon the Company’s satisfaction of the performance obligation, usually at the time of shipment to the customer, because control passes to the customer at that time. Our standard terms for customers are net due within 30 days, with a few exceptions, none regularly exceeding 60 days.
The Company provides disaggregated revenue details by segment in Note L – Segment Information, and geographic markets in Note M – Domestic and Foreign Revenues.
The Company offers a limited right of return and/or authorized price protection provisions in its agreements with certain electronic component distributors who resell the Company's products to original equipment manufacturers or electronic manufacturing services companies. As a result, the Company estimates and records a reserve for future returns and other charges against revenue at the time of shipment consistent with the terms of sale. The reserve is estimated based on historical experience with each respective distributor. These reserves and charges are immaterial as the Company does not have a history of significant price protection adjustments or returns. The Company provides a standard assurance warranty that does not create a performance obligation.
Practical Expedients:
|
-
|
The Company applies the practical expedient for shipping and handling as fulfillment costs.
|
|
-
|
The Company expenses sales commissions as sales and marketing expenses in the period they are incurred.
|
Shipping Costs
Amounts billed to customers related to shipping and handling are classified as revenue, and the Company's shipping and handling costs are included in manufacturing cost of sales.
Research and Development Costs
Research and development costs are charged to operations as incurred. Such costs were approximately $2,004,000 and $1,947,000 in 2019 and 2018, respectively, and are included within engineering, selling and administrative expenses.
Advertising Expense
Advertising costs are charged to operations as incurred. Such costs were approximately $2,000 in 2019, compared with $24,000 in 2018, and are included within engineering, selling and administrative expenses.
Stock-Based Compensation
The Company measures the cost of employee services in exchange for an award of equity instruments based on the grant-date fair value of the award and recognizes the cost over the requisite service period, typically the vesting period.
The Company estimates the fair value of stock options on the grant date using the Black-Scholes-Merton option-pricing model. The Black-Scholes-Merton option-pricing model requires subjective assumptions, including future stock price volatility and expected time to exercise, which greatly affect the calculated values. There is no expected dividend rate. Historical Company information was the basis for the expected volatility assumption as the Company believes that the historical volatility over the life of the option is indicative of expected volatility in the future. The risk-free interest rate is based on the U.S. Treasury zero-coupon rates with a remaining term equal to the expected term of the option. The Company records any forfeitures in the period that the shares are forfeited.
Restricted stock awards are made at a value equal to the market price of the Company's common stock on the date of the grant.
Earnings Per Share
The Company computes earnings per share in accordance with ASC 260, Earnings Per Share. Basic earnings per share is computed by dividing net earnings by the weighted average number of common shares outstanding during the period. Diluted earnings per share adjusts basic earnings per share for the effects of stock options and other potentially dilutive financial instruments, only in the periods in which the effects are dilutive.
39
For the years ended December 31, 2019 and 2018, there were options to purchase 25,000 shares and 15,606 shares, respectively, of common stock that were excluded from the diluted earnings per share computation because the impact of the assumed exercise of such stock options or warrants would have been anti-dilutive.
|
|
Years Ended December 31,
|
|
|
|
2019
|
|
|
2018
|
|
Weighted average shares outstanding - basic
|
|
|
4,883,923
|
|
|
|
4,748,609
|
|
Effect of diluted securities
|
|
|
93,672
|
|
|
|
126,422
|
|
Weighted average shares outstanding - diluted
|
|
|
4,977,595
|
|
|
|
4,875,031
|
|
Income Taxes
The Company's deferred income tax assets represent (a) temporary differences between the financial statement carrying amount and the tax basis of existing assets and liabilities that will result in deductible amounts in future years, and (b) the tax effects of net operating loss carry-forwards.
The Company periodically undertakes a review of its valuation allowance and it evaluates all positive and negative factors that may affect whether it is more likely than not that the Company would realize its future tax benefits from its deferred tax balances. Pursuant to ASC 740, Income Taxes, the Company determined, during the year ended December 31, 2019, that it is more likely than not that substantially all of our U.S. deferred tax assets including net operating loss carryforwards (“NOLs”) and tax credits can be utilized in the foreseeable future and that a previously recorded valuation allowance be reduced to record deferred tax assets at their expected net realizable value.
The Company recognizes interest and/or penalties, if any, related to income tax matters in income tax expense.
Concentration Risks
In 2019, the Company's largest customer, an electronics contract manufacturing company in the aerospace and defense markets, accounted for $5,522,000, or 17.3%, of the Company's total revenues, compared to $4,436,000, or 17.8%, in 2018. The Company’s second largest customer, a defense contract manufacturer, accounted for $3,187,000, or 10.0%, of the Company's total revenues, compared to $2,258,000, or 9.1%, in 2018.
A significant portion of the Company's accounts receivable is concentrated with a relatively small number of customers. As of December 31, 2019, four of the Company's largest customers accounted for approximately $1,841,000, or 40%, of accounts receivable. As of December 31, 2018, four of the Company's largest customers accounted for approximately $1,043,000, or 30%, of accounts receivable. The Company carefully evaluates the creditworthiness of its customers in deciding to extend credit, and utilizes letters of credit to further limit credit risk for export sales. As a result of these policies, the Company has experienced very low historical bad debt expense and believes the related risk to be minimal.
At various times throughout the year and at December 31, 2019 and 2018, some deposits held at financial institutions were in excess of federally insured limits. The Company has not experienced any losses related to these balances.
Segment Information
The Company reports segment information in accordance with ASC 280, Segment Information ("ASC 280"). ASC 280 requires companies to report financial and descriptive information for each identified operating segment based on management's internal organizational decision-making structure. Management has identified the Company’s two segments as electronic components and electronic instruments.
Impairments of Long-Lived Assets
Long-lived assets, including intangible assets subject to amortization, are reviewed for impairment whenever events or changes in circumstances indicate that the carrying amount of the asset may not be recoverable. Long-lived assets are grouped with other assets to the lowest level to which identifiable cash flows are largely independent of the cash flows of other groups of assets and liabilities. Management assesses the recoverability of the carrying cost of the assets based on a review of projected undiscounted cash flows. If an asset is held for sale, management reviews its estimated fair value less cost to sell. Fair value is determined using pertinent market information, including appraisals or broker's estimates, and/or projected discounted cash flows. In the event an impairment loss is identified, it is recognized based on the amount by which the carrying value exceeds the estimated fair value of the long-lived asset.
40
Financial Instruments
Cash and cash equivalents, trade accounts receivable, trade accounts payable, and accrued expenses are carried at cost, which approximates fair value due to the short-term maturity of these instruments.
Foreign Currency Translation
The assets and liabilities of international operations are re-measured at the exchange rates in effect at the balance sheet date for monetary assets and liabilities and at historical rates for non-monetary assets and liabilities, with the related re-measurement gains or losses reported within the consolidated statement of operations. The results of international operations are re-measured at the monthly average exchange rates. The Company's foreign subsidiaries and respective operations' functional currency is the U.S. dollar. The Company has determined this based upon the majority of transactions with customers as well as inter-company transactions and parental support being based in U.S. dollars. The Company has recognized a re-measurement loss of $13,000 and $74,000, in 2019 and 2018, respectively, which is included within other income, net in the consolidated statements of operations.
Recently Issued Accounting Pronouncements
In February 2016, the Financial Accounting Standards Board (“FASB”) issued Accounting Standards Update (“ASU”) 2016-02, “Leases (Topic 842)”, to require lessees to recognize all leases, with limited exceptions, on the balance sheet. The objective of this update is to increase transparency and comparability among organizations by recognizing lease assets and lease liabilities on the balance sheet and disclosing key information about leasing arrangements. Subsequently, the FASB issued ASU 2018-10, “Codification Improvements to Topic 842”, ASU 2018-11, “Targeted Improvements”, ASU 2018-20, “Narrow-Scope Improvements for Lessors”, and ASU 2019-01, “Codification Improvements”, to clarify and amend the guidance in ASU 2016-02. The Company’s adoption of the ASUs effective January 1, 2019 using the prospective basis resulted in the recording of lease assets and lease liabilities of $142,000 on the consolidated balance sheet during the first quarter of 2019. The Company has elected the practical expedient to exclude leases with terms less than one year from its calculations and disclosures.
B. Inventories
The Company reduces the value of its inventories to net realizable value when the net realizable value is believed to be less than the cost of the item. The inventory reserve for obsolescence as of December 31, 2019 and 2018 was $1,015,000 and $1,266,000, respectively.
|
|
December 31,
|
|
|
|
2019
|
|
|
2018
|
|
|
|
(in thousands)
|
|
Raw materials
|
|
$
|
2,134
|
|
|
$
|
1,719
|
|
Work in process
|
|
|
2,640
|
|
|
|
1,807
|
|
Finished goods
|
|
|
1,242
|
|
|
|
940
|
|
Total Inventories, net
|
|
$
|
6,016
|
|
|
$
|
4,466
|
|
C. Equity Investment in Unconsolidated Subsidiary
On November 6, 2019, the Company contributed $3.35 million to the Sponsor to fund the Sponsor’s purchase of $5.2 million of private warrants in a private placement that closed simultaneously with the consummation of the SPAC IPO. Each private warrant is exercisable to purchase one share of common stock of the SPAC at an exercise price of $11.50 per share, subject to adjustment. The Company contributed 62.2% of the Sponsor’s risk capital to effect the IPO, which corresponds to approximately a 43.57% membership interest in the Sponsor as of December 31, 2019.
The Company is involved with a VIE through its investment in the Sponsor, which was determined to be a VIE. The Sponsor is managed by LGL Systems Nevada Management Partners LLC (“Nevada GP”), an affiliated entity deemed to be under the significant influence of Marc Gabelli, the Company’s Chairman of the Board. The Company has determined that it is not the primary beneficiary, as Nevada GP has the power to direct the activities of the Sponsor that most significantly impact the Sponsor’s economic performance through an operating agreement. The Company has determined that it has significant influence through Nevada GP as a result of Marc Gabelli, and will therefore account
41
for the Sponsor under the equity method of accounting. The Sponsor has recorded losses of $26,000 during 2019, which are recognized by the Company in its statement of operations on its proportional equity investment.
The Sponsor holds 20% of the shares in the SPAC along with 5,200,000 warrants at a strike price of $11.50. On November 7, 2019, the SPAC raised $172.5 million through the sale of 17.25 million shares and was listed as a publicly traded company on the NASDAQ Capital Market under the ticker symbol ‘DFNS’. The IPO closed on November 12, 2019. Prior to and immediately following the IPO, the Sponsor held 4,312,500 shares of the SPAC, which are restricted and non-tradable.
If the SPAC does not complete a business combination within 24 months from the closing of the SPAC’s initial public offering, the proceeds from the sale of the private warrants will be used to fund the redemption of the shares sold in the SPAC’s initial public offering (subject to the requirements of applicable law), and the private warrants will expire worthless.
D. Related Party Transactions
Certain balances held and invested in various mutual funds are managed by g.research (the "Fund Manager"). Marc Gabelli, our non-executive chairman of the board, who is also a greater than 10% stockholder, currently serves as an executive officer of the Fund Manager. The brokerage and fund transactions in 2019 and 2018 were directed solely at the discretion of the Company’s management.
As of December 31, 2019, the balance with the Fund Manager totaled $14,613,000, including $8,992,000 which is classified within cash and cash equivalents on the accompanying consolidated balance sheets, and $5,621,000 which is classified as marketable securities on the accompanying consolidated balance sheets. Amounts invested generated $493,000 of realized and unrealized investment income during 2019 that is included within other income, net on the accompanying consolidated statement of operations.
As of December 31, 2018, the balance with the Fund Manager totaled $16,270,000, including $12,506,000 which is classified within cash and cash equivalents on the accompanying consolidated balance sheet, and $3,764,000 which is classified as marketable securities on the accompanying consolidated balance sheet. Amounts invested generated $203,000 of realized and unrealized investment income during 2018 that is included within other income, net on the accompanying consolidated statement of operations.
Fund management fees earned by the Fund Manager are anticipated to average less than 0.35% of the asset balances under management on an annual basis.
Marc Gabelli, our Non-Executive Chairman also serves as Chairman and Chief Executive Officer of the SPAC and has invested in the Sponsor, and is the initial managing member of Nevada GP. Timothy Foufas, a member of LGL’s board of directors, is also a member of the Sponsor and Chief Operating Officer of the SPAC, has invested in the Sponsor and is a member of Nevada GP. Patrick Huvane, LGL’s senior vice president of business development, is a member of both the Company and the SPAC’s management team. Michael J. Ferrantino, Jr., a member of the Company’s board of directors, is also a member of the Sponsor and a board member for the SPAC. Under separate arrangement, these people may be eligible to receive incentive compensation should the SPAC complete a successful acquisition.
On May 2, 2019, the Company agreed to loan the Sponsor an aggregate of up to $150,000 to cover expenses related to the SPAC IPO pursuant to a promissory note (the “Note”). This loan was non-interest bearing and payable on the earlier of (i) April 30, 2020, (ii) the completion of the SPAC IPO or (iii) the date on which the Company determined not to proceed with the SPAC IPO. The Note was repaid on December 19, 2019.
E. Stock-Based Compensation
On August 4, 2011, the Company's stockholders approved the 2011 Incentive Plan. 500,000 shares of common stock were authorized for issuance under the 2011 Incentive Plan. On June 16, 2016, the Company's stockholders approved the Amended and Restated 2011 Incentive Plan which increased the shares of common stock authorized for issuance to 750,000 shares of common stock. The Company believes that such awards better align the interests of its employees with those of its shareholders. Option awards are generally granted with an exercise price either at or 10% above the market price of the Company's stock at the date of grant; those option awards generally have 5-year contractual terms and generally vest over three years. Restricted stock awards are granted at a value equal to the market price of the Company's common stock on the date of grant.
42
The following table summarizes the inputs to the option valuation model for the options granted during the years ended December 31, 2019 and 2018:
|
|
2019
|
|
|
2018
|
|
Expected volatility
|
|
|
40
|
%
|
|
|
31
|
%
|
Dividend rate
|
|
0%
|
|
|
0%
|
|
Expected term (in years)
|
|
3.55
|
|
|
3.55
|
|
Risk-free rate
|
|
|
1.63
|
%
|
|
|
2.65
|
%
|
The Company bases expected volatility on the weighted average historical stock volatility of the Company's common stock. There is no dividend rate, as dividends are not expected to be paid. The expected term utilizes historical data to estimate the period of time that the options are expected to remain unexercised. The Company bases risk-free rates on the U.S. Treasury zero-coupon rates with a remaining term equal to the expected term of the option. The Company records any forfeitures in the period that the shares are forfeited.
The following table summarizes information about stock options outstanding and exercisable at December 31, 2019:
|
|
Number of
Shares
Outstanding
|
|
|
Weighted
Average
Exercise
Price
|
|
|
Weighted
Average
Grant Date
Fair Value
|
|
|
Weighted
Average
Remaining
Term
(in years)
|
|
|
Aggregate Intrinsic
Value
(in thousands)
|
|
Option Balances at December 31, 2018
|
|
|
153,877
|
|
|
$
|
4.75
|
|
|
$
|
1.18
|
|
|
|
2.0
|
|
|
$
|
208
|
|
Options Granted
|
|
|
25,000
|
|
|
|
12.72
|
|
|
|
4.02
|
|
|
|
|
|
|
|
|
|
Options Exercised
|
|
|
(96,748
|
)
|
|
|
4.68
|
|
|
|
1.26
|
|
|
|
|
|
|
|
|
|
Options Forfeited
|
|
|
(3,750
|
)
|
|
|
3.90
|
|
|
|
0.89
|
|
|
|
|
|
|
|
|
|
Option Balances at December 31, 2019
|
|
|
78,379
|
|
|
$
|
7.43
|
|
|
$
|
2.00
|
|
|
|
2.7
|
|
|
$
|
593
|
|
Options Exercisable at December 31, 2019
|
|
|
45,317
|
|
|
$
|
4.74
|
|
|
$
|
1.02
|
|
|
|
1.4
|
|
|
$
|
465
|
|
The weighted-average grant-date fair value of options granted during the years 2019 and 2018 was $4.02 and $1.65, respectively. As of December 31, 2019, there was approximately $105,000 of total unrecognized compensation expense related to unvested share-based compensation arrangements, which will be recognized over 2.7 years.
During the year ended December 31, 2019, the Company issued 5,871 shares with a weighted average grant date fair value of $14.57 per share. These shares were fully vested on the date of issuance. As of December 31, 2019, there were no unvested restricted shares granted under the Amended and Restated 2011 Incentive Plan.
The Amended and Restated 2011 Incentive Plan had 407,218 shares remaining available for future issuance at December 31, 2019.
F. Income Taxes
The Company periodically undertakes a review of its valuation allowance and it evaluates all positive and negative factors that may affect whether it is more likely than not that the Company would realize its future tax benefits from its deferred tax balances. In 2014, the Company introduced a number of changes, most notably the decision to exit the low-margin, high-volume telecommunications market and focus on engineered solutions in the aerospace and defense markets. This turnaround plan was engineered and executed by the Company’s previous chief executive officer, with the consent of the Board of Directors and participation by management. Over the following five years, the negative factors that caused the Company to produce continuing losses in the U.S. tax jurisdiction were eliminated, with the result being sustained increases in the Company’s sales, revenues, and backlog. Margins from its new and improved products and services have continually increased and the Company maintains a strong backlog of orders with its customers to support the assertion that it is more likely than not that substantially all of its net deferred tax assets will be utilized and that associated valuation allowances should be eliminated.
In assessing the realizability of deferred tax assets, the Company considers whether it is more likely than not that some portion or all of the deferred tax assets will or will not be realized. The ultimate realization of deferred tax assets is
43
dependent upon the generation of future taxable income during the periods in which those temporary differences become realizable. Based upon the weighting of positive and negative evidence, the Company has determined the results of future operations of one of its foreign subsidiaries will generate enough taxable income that it is more likely than not that deferred tax assets of $67,000 at December 31, 2019, generated from foreign NOLs, can be utilized in the foreseeable future. In the third quarter of 2019, the Company further determined that a full valuation against the remaining net deferred tax assets was no longer required and reversed a previously recorded valuation allowance, recording deferred tax assets at the amount that is more likely than not to be realized.
The net balance of the deferred tax asset was approximately $5.2 million as of December 31, 2018, with a related valuation allowance of $5.1 million. Through the nine months ended September 30, 2019, the Company was able to realize $0.7 million of its deferred tax assets as a result of its profitable operations. At September 30, 2019, the Company wrote off $0.7 million of deferred tax assets and the related valuation allowance for certain deferred tax assets which were no longer realizable, and released $3.3 million from its valuation allowance, representing the net realizable portion of its U.S. deferred tax assets, with the balance of the valuation allowance of $0.4 million covering that portion of the Company’s U.S. deferred tax assets which are not expected to be realized, relating to research and development tax credits. Should a change in circumstances lead to a change in judgment about the ability to realize deferred tax assets in future years, the Company will adjust related valuation allowances in the period that the change in circumstances occurs, along with a corresponding increase or charge to income.
Income tax (benefit) provision for the years ended December 31, 2019 and 2018 is as follows:
|
|
2019
|
|
|
2018
|
|
|
|
(in thousands)
|
|
Current:
|
|
|
|
|
|
|
|
|
Federal
|
|
$
|
—
|
|
|
$
|
(57
|
)
|
State and local
|
|
|
30
|
|
|
|
20
|
|
Foreign
|
|
|
43
|
|
|
|
156
|
|
Total Current
|
|
|
73
|
|
|
|
119
|
|
Deferred:
|
|
|
|
|
|
|
|
|
Federal
|
|
|
1,322
|
|
|
|
616
|
|
State and local
|
|
|
147
|
|
|
|
(86
|
)
|
Foreign
|
|
|
60
|
|
|
|
46
|
|
Total before change in valuation allowance
|
|
|
1,529
|
|
|
|
576
|
|
Change in valuation allowance
|
|
|
(4,709
|
)
|
|
|
(530
|
)
|
Net deferred
|
|
|
(3,180
|
)
|
|
|
46
|
|
Income tax (benefit) provision
|
|
$
|
(3,107
|
)
|
|
$
|
165
|
|
A reconciliation of the (benefit) provision for income taxes and the amount computed by applying the statutory federal income tax rate to income before income taxes is detailed below:
|
|
2019
|
|
|
2018
|
|
|
|
(in thousands)
|
|
Tax provision at expected statutory rate
|
|
$
|
821
|
|
|
$
|
330
|
|
State taxes, net of federal benefit
|
|
|
92
|
|
|
|
43
|
|
Permanent differences
|
|
|
34
|
|
|
|
122
|
|
Credits
|
|
|
(108
|
)
|
|
|
(82
|
)
|
Foreign tax expense, and other
|
|
|
13
|
|
|
|
420
|
|
Change in rate
|
|
|
63
|
|
|
|
(138
|
)
|
Change in valuation allowance
|
|
|
(4,709
|
)
|
|
|
(530
|
)
|
Permanent true-ups
|
|
|
687
|
|
|
|
—
|
|
(Benefit) provision for income taxes
|
|
$
|
(3,107
|
)
|
|
$
|
165
|
|
44
Deferred income taxes for 2019 and 2018 were provided for the temporary differences between the financial reporting basis and the tax basis of the Company's assets and liabilities. Tax effects of temporary differences and carry-forwards at December 31, 2019 and 2018 were as follows:
|
|
December 31, 2019
|
|
|
December 31, 2018
|
|
|
|
Deferred Tax
|
|
|
Deferred Tax
|
|
|
|
Asset
|
|
|
Liability
|
|
|
Asset
|
|
|
Liability
|
|
|
|
(in thousands)
|
|
Inventory reserve
|
|
$
|
239
|
|
|
$
|
—
|
|
|
$
|
301
|
|
|
$
|
—
|
|
Fixed assets
|
|
|
—
|
|
|
|
100
|
|
|
|
—
|
|
|
|
90
|
|
Other reserves and accruals
|
|
|
358
|
|
|
|
—
|
|
|
|
207
|
|
|
|
—
|
|
Stock-based compensation
|
|
|
6
|
|
|
|
—
|
|
|
|
23
|
|
|
|
—
|
|
Other
|
|
|
—
|
|
|
|
18
|
|
|
|
—
|
|
|
|
24
|
|
Tax credit carry-forwards
|
|
|
1,724
|
|
|
|
—
|
|
|
|
1,966
|
|
|
|
—
|
|
Federal tax loss carry-forwards
|
|
|
1,169
|
|
|
|
—
|
|
|
|
1,980
|
|
|
|
—
|
|
State tax loss carry-forwards
|
|
|
250
|
|
|
|
—
|
|
|
|
734
|
|
|
|
—
|
|
Foreign tax loss carry-forwards
|
|
|
67
|
|
|
|
—
|
|
|
|
127
|
|
|
|
—
|
|
Total deferred income taxes
|
|
|
3,813
|
|
|
$
|
118
|
|
|
|
5,338
|
|
|
$
|
114
|
|
Valuation allowance
|
|
|
(388
|
)
|
|
|
|
|
|
|
(5,097
|
)
|
|
|
|
|
Net deferred tax assets
|
|
$
|
3,307
|
|
|
|
|
|
|
$
|
127
|
|
|
|
|
|
Deferred tax assets totaled $3.7 million at December 31, 2019, which includes the tax effect of federal, state, and foreign net operating loss carryforwards and our federal tax credits. We recognize federal, state, and foreign net operating loss carryforwards and our federal tax credits as deferred tax assets, subject to valuation allowances. At each balance sheet date, we estimate the amount of carryforwards that are not expected to be used prior to expiration of the carryforward period.
The Company has a total gross federal NOL carry-forward of $5,565,000 as of December 31, 2019. This federal NOL carry-forward expires through 2038 if not utilized prior to that date. The Company has total state NOL carry-forwards of $6,680,000 as of December 31, 2019. These state NOL balances have unlimited carryforward periods. The Company has research and development tax credit carry-forwards of approximately $1,724,000 at December 31, 2019 that can be used to reduce future income tax liabilities and expire principally between 2020 and 2038. The tax effect of the carryforwards that are not expected to be used prior to their expiration is included in the valuation allowance. At December 31, 2019, the balance in the Company’s valuation allowance was $388,000, consisting primarily of research and development tax credits expiring between 2020 and 2024.
The Company files income tax returns in the U.S. federal, various state, Hong Kong and India jurisdictions. The statute of limitations for assessment by the Internal Revenue Service ("IRS") and state tax authorities is open for tax returns for years ended December 31, 2016, 2017 and 2018, although carry-forward attributes that were generated prior to tax year 2016, including NOL carry-forwards and tax credits, may still be adjusted upon examination by the IRS or state tax authorities if they either have been or will be used in a future period. The Company is generally subject to examinations by foreign tax authorities from 2014 to the present.
The Company will recognize any interest and penalties related to unrecognized tax positions in income tax expense. At the date of adoption of ASC 740, the Company did not have a liability for unrecognized tax positions. As of December 31, 2019, management assessed the balances of its deferred tax assets and liabilities and has determined that it has not taken any aggressive tax positions that may be considered uncertain under ASC 740-10.
45
G. Leases
We lease certain manufacturing and office space and equipment. We determine if an arrangement is a lease at inception. A contract is or contains a lease if the contract conveys the right to control the use of identified property, plant, or equipment (an identified asset) for a period of time in exchange for consideration. Amounts associated with operating leases are included in right-of-use lease assets, and other accrued expense in our consolidated balance sheet. Right-of-use lease assets represent our right to use an underlying asset for the lease term and lease liabilities represent our obligation to make lease payments arising from the lease. Right-of-use lease assets and liabilities are recognized at the lease commencement date based on the estimated present value of lease payments over the lease term. We use our incremental borrowing rate based on the information available at the lease commencement date in determining the present value of lease payments. Leases with an initial term of 12 months or less are not recorded on the balance sheet, and we recognize lease expense for these leases on a straight-line basis over the lease term.
Certain leases include one or more options to renew, with renewal terms that can extend the lease term from one to 10 years or more, and the exercise of lease renewal options under these leases is at our sole discretion. Our lease agreements do not contain any material residual value guarantees or material restrictive covenants.
Rent expense under operating leases was $430,000 and $393,000 for the years ended December 31, 2019 and 2018, respectively. The Company leases certain property and equipment, including warehousing, and sales and distribution equipment, under operating leases that extend from one to five years. Certain of these leases have renewal options.
During the year ended December 31, 2019, we renewed a lease on one of our facilities, resulting in the addition of $318,000 in right-of-use lease assets in exchange for operating lease liabilities.
Our lease obligation payable of $331,000 is included within other accrued expenses on the consolidated balance sheet at December 31, 2019.
Future minimum lease payment obligations under operating leases are as follows (in thousands):
|
|
2019
|
|
|
2018
|
|
2020
|
|
$
|
92
|
|
|
$
|
35
|
|
2021
|
|
|
62
|
|
|
|
26
|
|
2022
|
|
|
64
|
|
|
|
—
|
|
2023
|
|
|
64
|
|
|
|
—
|
|
2024
|
|
|
63
|
|
|
|
—
|
|
Thereafter
|
|
|
—
|
|
|
|
—
|
|
Total lease payments
|
|
|
345
|
|
|
|
61
|
|
Less: interest
|
|
|
(14
|
)
|
|
|
(3
|
)
|
Total lease payments
|
|
$
|
331
|
|
|
$
|
58
|
|
H. Stockholders' Equity
Share Repurchase Program
On August 29, 2011, the Board authorized the Company to repurchase up to 100,000 shares of its common stock in accordance with applicable securities laws. This authorization increased the total number of shares authorized and available for repurchase under the Company's existing share repurchase program to 540,000 shares, at such times, amounts and prices as the Company shall deem appropriate. As of December 31, 2019, the Company had repurchased a total of 81,584 shares of common stock at a cost of $580,000, which shares are currently held in treasury.
I. Fair Value Measurements
Fair value is defined as the price that would be received to sell an asset or paid to transfer a liability in an orderly transaction between market participants at the measurement date. Fair value guidance identifies three primary valuation techniques: the market approach, the income approach and the cost approach. The market approach uses prices and other relevant information generated by market transactions involving identical or comparable assets or liabilities. The income approach uses valuation techniques to convert future amounts such as cash flows or earnings, to a single present amount. The measurement is based on the value indicated by current market expectations about those
46
future amounts. The cost approach is based on the amount that currently would be required to replace the service capacity of an asset.
The fair value hierarchy prioritizes the inputs to valuation techniques used to measure fair value into three broad levels. The fair value hierarchy gives the highest priority to observable inputs such as quoted prices in active markets for identical assets or liabilities (Level 1) and the lowest priority to unobservable inputs (Level 3). The maximization of observable inputs and the minimization of the use of unobservable inputs are required.
Classification within the fair value hierarchy is based upon the objectivity of the inputs that are significant to the valuation of an asset or liability as of the measurement date. The three levels within the fair value hierarchy are characterized as follows:
Level 1 - Quoted prices (unadjusted) in active markets for identical assets or liabilities that the Company has the ability to access at the measurement date.
Level 2 - Inputs other than quoted prices included within Level 1 that are observable for the asset or liability, either directly or indirectly. Level 2 inputs include: quoted prices for similar assets or liabilities in active markets; quoted prices for identical or similar assets or liabilities in markets that are not active; inputs other than quoted prices that are observable for the asset or liability; and inputs that are derived principally from or corroborated by observable market data by correlation or other means.
Level 3 - Unobservable inputs for the asset or liability for which there is little, if any, market activity for the asset or liability at the measurement date. Unobservable inputs reflect the Company's own assumptions about what market participants would use to price the asset or liability. These inputs may include internally developed pricing models, discounted cash flow methodologies, as well as instruments for which the fair value determination requires significant management judgment.
Assets
To estimate the market value of its cash and cash equivalents and marketable securities, the Company obtains current market pricing from quoted market sources or uses pricing for identical securities. Assets measured at fair value on a recurring basis are summarized below.
(in thousands)
|
|
Level 1
|
|
|
Level 2
|
|
|
Level 3
|
|
|
Total
December 31,
2019
|
|
Marketable Equity Security
|
|
$
|
10
|
|
|
$
|
—
|
|
|
$
|
—
|
|
|
$
|
10
|
|
Equity Mutual Fund
|
|
$
|
—
|
|
|
$
|
5,621
|
|
|
$
|
—
|
|
|
$
|
5,621
|
|
U.S. Treasury Mutual Fund
|
|
$
|
8,915
|
|
|
$
|
—
|
|
|
$
|
—
|
|
|
$
|
8,915
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
(in thousands)
|
|
Level 1
|
|
|
Level 2
|
|
|
Level 3
|
|
|
Total
December 31,
2018
|
|
Marketable Equity Security
|
|
$
|
11
|
|
|
$
|
—
|
|
|
$
|
—
|
|
|
$
|
11
|
|
Equity Mutual Fund
|
|
$
|
—
|
|
|
$
|
3,764
|
|
|
$
|
—
|
|
|
$
|
3,764
|
|
U.S. Treasury Mutual Fund
|
|
$
|
12,506
|
|
|
$
|
—
|
|
|
$
|
—
|
|
|
$
|
12,506
|
|
There were no transfers to or from level 2 to level 3 during the reporting periods. The Company also has assets that may be subject to measurement at fair value on a non-recurring basis, including goodwill and intangible assets, and other long-lived assets. There were no liabilities subject to fair value on a non-recurring or recurring basis as of December 31, 2019 or 2018.
As of December 31, 2019 and 2018, The Company had investments in two mutual funds. The Equity Mutual Fund noted above is invested in the Gabelli ABC Fund, and the U.S. Treasury Mutual Fund is invested in the Gabelli US Treasury Money Market Fund.
The Company reviews goodwill annually and the carrying value of long-lived assets whenever events and circumstances indicate that the carrying amounts of the assets may not be recoverable. If it is determined that the assets are impaired, the carrying value would be reduced to estimated recoverable value.
47
J. Employee Benefit Plans
The Company offers a defined contribution plan for eligible employees, in which the Company makes discretionary contributions up to 50% of the first 6% of eligible compensation contributed by participants. The Company contributed approximately $115,000 and $118,000 in discretionary contributions during 2019 and 2018, respectively. Participants vest in employer contributions starting after their second year of service at 20% increments, vesting 100% in year six.
K. Commitments and Contingencies
In the normal course of business, the Company and its subsidiaries may become defendants in certain product liability, patent infringement, worker claims and other litigation. The Company records a liability when it is probable that a loss has been incurred and the amount is reasonably estimable. The Company is not involved in any legal proceedings other than routine litigation arising in the normal course of business, none of which the Company believes will have a material adverse effect on the Company's business, financial condition or results of operations.
L. Segment Information
The Company has identified two reportable business segments from operations: electronic components, which includes all products manufactured and sold by MtronPTI, and electronic instruments, which includes all products manufactured and sold by PTF. The Company's foreign operations in Hong Kong and India fall under MtronPTI.
Operating income is equal to revenues less cost of sales and operating expenses, excluding investment income, interest expense, and income taxes. Identifiable assets of the segment are those used in its operations and exclude general corporate assets. General corporate assets are principally cash and cash equivalents, short-term investments and certain other investments and receivables.
|
|
Years Ended December 31,
|
|
|
|
2019
|
|
|
2018
|
|
|
|
(in thousands)
|
|
Revenues from Operations
|
|
|
|
|
|
|
|
|
Electronic components
|
|
$
|
30,553
|
|
|
$
|
23,793
|
|
Electronic instruments
|
|
|
1,344
|
|
|
|
1,077
|
|
Total consolidated revenues
|
|
$
|
31,897
|
|
|
$
|
24,870
|
|
Operating Income from Operations
|
|
|
|
|
|
|
|
|
Electronic components
|
|
$
|
4,726
|
|
|
$
|
2,525
|
|
Electronic instruments
|
|
|
257
|
|
|
|
49
|
|
Unallocated corporate expense
|
|
|
(1,544
|
)
|
|
|
(1,144
|
)
|
Consolidated total operating income
|
|
|
3,439
|
|
|
|
1,430
|
|
Interest income, net
|
|
|
2
|
|
|
|
2
|
|
Loss on equity investment in unconsoldiated subsidiary
|
|
|
(16
|
)
|
|
|
—
|
|
Other income, net
|
|
|
484
|
|
|
|
138
|
|
Total other income
|
|
|
470
|
|
|
|
140
|
|
Income Before Income Taxes
|
|
$
|
3,909
|
|
|
$
|
1,570
|
|
Capital Expenditures
|
|
|
|
|
|
|
|
|
Electronic components
|
|
$
|
1,163
|
|
|
$
|
324
|
|
Electronic instruments
|
|
|
—
|
|
|
|
—
|
|
General corporate
|
|
|
—
|
|
|
|
—
|
|
Total capital expenditures
|
|
$
|
1,163
|
|
|
$
|
324
|
|
Total Assets
|
|
|
|
|
|
|
|
|
Electronic components
|
|
$
|
9,863
|
|
|
$
|
11,877
|
|
Electronic instruments
|
|
|
706
|
|
|
|
861
|
|
General corporate
|
|
|
28,648
|
|
|
|
17,337
|
|
Consolidated total assets
|
|
$
|
39,217
|
|
|
$
|
30,075
|
|
48
M. Domestic and Foreign Revenues
Significant foreign revenues from operations (10% or more of foreign sales) were as follows (in thousands):
|
|
Years Ended December 31,
|
|
|
|
2019
|
|
|
2018
|
|
|
|
(in thousands)
|
|
Malaysia
|
|
$
|
4,329
|
|
|
$
|
3,153
|
|
All other foreign countries
|
|
|
4,171
|
|
|
|
3,044
|
|
Total foreign revenues
|
|
$
|
8,500
|
|
|
$
|
6,197
|
|
Total domestic revenues
|
|
$
|
23,397
|
|
|
$
|
18,673
|
|
The Company allocates its foreign revenue based on the customer's ship-to location.
N. Subsequent Events
ATM Program
On January 22, 2020, the Company entered into an Open Market Sale Agreement (the “Agreement”) with Jefferies LLC, as sales agent (“Jefferies”), pursuant to which the Company may offer and sell, from time to time, through Jefferies, shares of the Company’s common stock, par value $0.01 per share, having an aggregate offering price of up to $15,000,000 (the “Shares”).
The Company is not obligated to sell any Shares under the Agreement. Subject to the terms and conditions of the Agreement, Jefferies will use commercially reasonable efforts, consistent with its normal trading and sales practices and applicable laws and regulations, to sell Shares from time to time based upon the Company’s instructions, including any price, time or size limits specified by the Company, subject to certain limitations. Under the Agreement, Jefferies may sell the Shares by any method permitted by law deemed to be an “at the market offering” as defined in Rule 415(a)(4) under the Securities Act of 1933, as amended, including block transactions, sales made directly on the NYSE American or sales made into any other existing trading market of the Company’s common stock.
Shares sold under the Agreement will be issued pursuant to the shelf registration statement on Form S-3 (File No. 333-235767), filed by the Company with the SEC on December 31, 2019, which was declared effective on January 8, 2020. The Company filed a prospectus supplement with the SEC on January 23, 2020 in connection with the offer and sale of the common shares pursuant to the Agreement.
Through the date of this report, there have been 263,725 shares sold under this Agreement, at an average price per share of $13.65 and generating net proceeds of approximately $3,491,000.
Novel Coronavirus Outbreak
On March 11, 2020, the World Health Organization declared the novel coronavirus outbreak (“COVID-19”) a pandemic. COVID-19 could impact the Company’s operations, suppliers and/or customers in a significant way. Any disruptions to the Company’s operations, or those of our suppliers or customers, may adversely impact the Company’s revenues and operating results. COVID-19 could also adversely affect the economies and financial markets of many countries, including other countries in which the Company operates, with a resulting economic downturn that may affect demand for our products.
The extent to which COVID-19 impacts the Company’s results will depend on future developments, including new information which may emerge concerning the severity and global spread of COVID-19 and any governmental or state actions taken to contain its impact, which efforts are highly uncertain and cannot be predicted.
Our production facility in Orlando is situated in Orange County, whose mayor declared a stay-in-place order beginning March 26, 2020 at 11pm for two weeks. Our MtronPTI business within that production facility operates as a manufacturer within the defense and aerospace market and qualifies as an essential industry, not subject to general quarantine or stay-in-place orders.
Our production facility in Noida, India, has been impacted by the Indian government’s nationwide lockdown, beginning March 25, 2020 and expected to be in place for 21 days, and all production activities have ceased.
The company continues to assess the potential impact of COVID-19, which remains uncertain at this time.
49
Adverse Impact on Operating Unit Liquidity
Mtron Systems Holdings, LLC and Precise Time and Frequency, LLC do not have existing lines of credit in place. Current cash and liquidity may not be sufficient if there is a prolonged disruption of their operations (see discussion above), and such events could have a significant detrimental impact on the liquidity of our subsidiaries. It is unknown whether viable alternatives to access liquidity will be available, and/or if our subsidiaries, respectively, will qualify for prospective sources of liquidity. Such includes the possibility to draw capital from the parent LGL Group, Inc.
Global Financial Market Downturn
With the recent downturn in the financial markets, as a result of COVID-19 and other factors, our marketable securities have suffered losses totaling around $0.3 million, or approximately 5.5% as of the market close on March 27, 2020.
50