CommAgility LTE platform supports eNodeB and UE LTE-Advanced functionality
February 01 2018 - 8:00AM
Business Wire
Stand-alone system supports software-defined LTE
configuration
CommAgility, a Wireless Telecom Group company (NYSE MKT: WTT),
today announced the CA-D8A4-RF4, a stand-alone hardware platform
supporting eNodeB and UE configurations for LTE-Advanced (LTE-A)
networks.
The platform comes pre-integrated and tested with CommAgility's
Small Cell or Mobile LTE software providing out-of-the box
connectivity, thus cutting time to market and reducing risk. The
CA-D8A4-RF4 has been designed for use in applications such as small
cell, relay and terminal equipment, in private network markets
including Citizens Broadband Radio Service (CBRS) and
ground-to-air. By providing high-performance, flexible processing
and interfacing, it delivers a platform that enables customers to
benefit from CommAgility's world-leading experience of LTE
adaptation for specialized private networks.
"CA-D8A4-RF4 is the result of CommAgility's deep expertise in
private network requirements and long-term experience working with
customers’ unique needs," said Edward Young, Vice President and
General Manager at CommAgility. "By providing a fully
software-defined platform and bespoke LTE customization at all
protocol layers, we can enable customers to leverage the benefits
of LTE into real-world applications."
Baseband processing is performed by the TCI6638K2K System on
Chip (SoC) from Texas Instruments. The CommAgility LTE SmallCell
software supports an eNodeB with 120 active, 360 connected users
and a throughput of up to 300Mbps downlink, 102Mbps uplink. EPC
integration can also be supported to create a stand-alone network
on the platform.
As a terminal the mobile platform supports a Release 10 feature
set with 20MHz bandwidth, 2x2 MIMO and 64QAM. Combined with
CommAgility’s LTE UE software, it is ideal for highly
differentiated LTE UE products that require customization.
Enhancements such as extended Doppler shift and latency for
high-speed, long range applications are available.
The CA-D8A4-RF4 has a software-defined RF front end with four
transmit and receive channels supporting bands between 410MHz and
5925MHz with bandwidths up to 100MHz, making the platform ideal for
5G new radio development. Independent front end modules support TDD
and FDD modes of operation at up to +21dBm rated power output per
antenna and allow easy customisation for different frequency bands
or higher power outputs. The channels can be operated in 4x4 MIMO
or 2x2 MIMO 2CC carrier aggregated mode. Three CPRI interfaces are
provided to support remote radio head operation if required.
A range of build options is available, and further customization
of the platform and enclosure design is possible in volume, to
enable the best technical and commercial fit to a customer
application to be achieved.
The CA-D8A4-RF4 will be available from July 2018.
For more information please contact CommAgility at +44 1509
228866 or +1 (408) 641 4135, sales@commagility.com or
www.commagility.com.
About Wireless Telecom Group, Inc.
Wireless Telecom Group, Inc., comprised of Boonton
Electronics, CommAgility, Microlab and Noisecom, is a global
designer and manufacturer of advanced RF and microwave components,
modules, systems and instruments. Serving the wireless,
telecommunication, satellite, military, aerospace, semiconductor
and medical industries, Wireless Telecom Group products enable
innovation across a wide range of traditional and emerging wireless
technologies. With a unique set of high-performance products
including peak power meters, signal analyzers, signal processing
modules, LTE PHY and stack software, power splitters and combiners,
GPS repeaters, public safety monitors, noise sources, and
programmable noise generators, Wireless Telecom Group supports the
development, testing, and deployment of wireless technologies
around the globe.
CommAgility, a Wireless Telecom Group company, is an
award-winning developer of embedded signal processing and RF
modules, and LTE PHY/stack software, for 4G and 5G mobile network
and related applications. CommAgility designs the latest DSP, FPGA
and RF technologies into compact, powerful, and reliable products
based on industry standard architectures. CommAgility’s LTE
software for mobile devices and wireless infrastructure includes
physical layer and protocol stack for small cells, physical layer
and protocol stack for terminals, an advanced scheduler for small
cells, and IP development in the areas of advanced PHY algorithms
in multi-core SDR platforms.
Wireless Telecom Group, Inc.’s website address is www.wtcom.com.
Except for historical information, the matters discussed in this
news release may be considered "forward-looking" statements within
the meaning of Section 27A of the Securities Act of 1933, as
amended, and Section 21E of the Securities Exchange Act of 1934, as
amended. Such statements include declarations regarding the intent,
belief or current expectations of the Company and its management.
Prospective investors are cautioned that any such forward-looking
statements are not guarantees of future performance and involve a
number of risks and uncertainties that could materially affect
actual results. Such risks and uncertainties are identified in the
Company's reports and registration statements filed with the
Securities and Exchange Commission, including its Annual Report on
Form 10-K for the year ended December 31, 2016.
View source
version on businesswire.com: http://www.businesswire.com/news/home/20180201005658/en/
Wireless Telecom Group Inc.Nick DainesTel: +44 (0) 115
8412109Mobile: +44 (0) 7958 534731nick@lumenpr.com
Wireless Telecom (AMEX:WTT)
Historical Stock Chart
From Aug 2024 to Sep 2024
Wireless Telecom (AMEX:WTT)
Historical Stock Chart
From Sep 2023 to Sep 2024