Energizer Resources Inc. (TSX:EGZ)(OTCBB:ENZR)(FRANKFURT:YE5)
("Energizer" or the "Company") is pleased to announce preliminary
results from exploration programs on its Green Giant, and Malagasy
Minerals Limited ("Malagasy") (ASX:MGY) Joint Venture (JV)
properties in Madagascar. Drill core assays received to date from
the Phase I exploration program, have yielded intersections
assaying up to 7.46% carbon © over 61.4 metres in length. Multiple
graphitic zones discovered during the course of the Phase II
exploration indicate the Company has begun to outline a new
graphite camp. Highlights of the Phase I and II exploration
programs are as follows, with a summary of drill core assays
provided at the conclusion of this release:
Phase I Exploration - Green Giant Property
-- Identification of multiple flake graphite zones on Green Giant property
-- Drill core assay results ranging as high as 21.0% C
-- All Drill Holes intersected graphite with the most significant being
FOND-01 which intersected 7.46% C over 61.46m
-- Grab sample assays ranging up to 21.3% C
Phase II Exploration - Green Giant and Malagasy JV Property
-- Identification of multiple graphitic trends on JV property
-- The 21 km vanadium trend found on the Green Giant property has now been
increased by an additional 30 km on the JV property
-- Molo zone identified on the JV property, which features structurally
'thickened' graphite zones
Phase I Exploration
Graphite Identified in Manga Vanadium Deposit Presents Dual
Opportunity
The mineralization delineated in the Company's NI43-101
compliant vanadium resource was found in two types of rocks,
silicates and oxides. Petrographic descriptions undertaken on thin
sections of selected rocks submitted for metallurgical analysis to
Mintek of South Africa, identified 17.17% modal graphite from the
silicate composite and 15.87% modal graphite from the oxide
composite samples. As vanadium and graphite are considered to be
strategic minerals, the Company will position itself to deliver a
dual offering of strategic minerals from a single source for energy
storage, as well as steel and other innovative products.
Three additional composite samples were submitted to Mintek at
the conclusion of the 2010 exploration program. Mintek reported
analyses of these samples to Energizer in December, 2010 and
January, 2011. The QEMSCAN(1) analysis of these head samples
quantified a graphite composition of 4.09%, while the head chemical
analysis quantified a graphitic carbon content of 3.87%.
5 Graphite Zones Identified to date on Green Giant Property
The identification of graphite as a potential credit to the
Company's NI 43-101 compliant vanadium resources led Company
geologists to conduct a reconnaissance exploration program (Phase I
program) on the Property in September, 2011, with the goal of
delineating new graphitic trends, and comparing them to those
associated with vanadium mineralization.
During the course of the Phase I program, surficial graphitic
trends were identified on the Green Giant Property. These graphite
trends were visually determined to be of both higher carbon
content, and larger flake size than those associated with the NI
43-101 compliant vanadium resource mineralization. Based on these
field observations, the Company initiated an exploration program
which included 10 diamond drill holes (totalling 1157.5 metres), 16
trenches (totalling 1912 metres), and 132 grab samples collected
over two newly identified prospective graphitic units, named the
Fondrana and Fotsy zones, bringing the total number of Graphite
Zones on the Property to 5.
The 5 Graphite Zones can be viewed on the Company website by
Clicking here.
Phase II Exploration
Based on the promising results of the Phase I program, the
Company launched the Phase II exploration program in November,
2011. The objective of the program was to enhance exploration
efforts on the Green Giant property through further drill testing
of graphitic trends on the Green Giant Property and to apply
geophysical techniques to delineate graphite mineralization. The
signing of the JV agreement with Malagasy in November, 2011 for the
exploration and development of industrial minerals, prompted
additional reconnaissance exploration to ascertain the industrial
mineral potential of the joint venture property.
Geophysical Tools Employed to Identify Multiple Graphite
Mineralization Trends
Over the course of exploration activities on the Green Giant
property, Energizer completed a DIGHEM EM/Magnetic Airborne survey
(in 2007 by Fugro Airborne Surveys Limited), and an AeroTEM IV Time
Domain Airborne Electromagnetic survey (in 2011 by Aeroquest
Limited). Company geophysicists have utilized these geophysical
surveys to identify multiple graphitic trends on the Green Giant
property. With the acquisition of additional airborne geophysical
data (Geotech VTEM survey) flown over the JV property provided by
Malagasy, Company geologists have further delineated the known
graphitic trends.
Potential Flake Graphite Camp
During the course of the Phase I and II exploration programs,
multiple graphitic or graphitic-vanadium trends were identified
with the aid of airborne geophysics, and subsequently verified with
ground prospecting, and delineated with the use of an EM31-MK2
(EM31) instrument. In total, 12 new graphite trends have been
identified over the JV property. This brings the total number of
graphite trends identified to date over the Green Giant and JV
properties to 17, with a cumulative strike length in excess of 320
km. These observations have validated the Company's belief that
southern Madagascar has the potential to host a potential flake
graphite camp.
The graphite trends identified to date are named as follows:
Berenty, Bemelo, Mahasoa, Bepeha, Besavoa, Fondrana, Mainty,
Manga, Molo, Bevaro, Jaky, Fotsy, Rano, Seta, Tanantsoa, Vavy,
Ampanihy
To see an image of the 17 Graphite trends, Click here.
Multiple Graphitic Horizons Identified Within Each Zone With
EM31
Field observations indicated that each graphitic zone
identified, was comprised of multiple 'stacked' graphitic horizons.
This observation was validated by surveying a number of the zones
in detail with an EM31 ground conductivity instrument. In total,
160.5 line kilometres of EM31 surveying was completed over 5 target
areas, the Fondrana, Fotsy, Molo, Seta, and Besavoa targets.
The EM31 geophysical tool was invaluable in delineating the
extents of the graphitic zones, as well as their continuity. The
EM31 has the capability to also identify multiple graphitic
horizons within each zone. As an example, the Fotsy zone has a
delineated strike length of 6 kilometres, but the EM31 identified
at least 4 separate graphite horizons within the zone, for an
aggregate strike length of 24 kilometres. The table below
summarizes the graphite strike length analysis as determined by
EM31 testing over 5 zones:
----------------------------------------------------------------------------
Zone Zone Length Number of Aggregate EM31 Measured
(km) Graphite Horizons Strike Length (km)
Besavoa 3 4 12
Fondrana 1 3 3
Fotsy 6 4 24
Molo 2 5 10
Seta 1.6 2 3.2
Totals 13.6 18 52.2
----------------------------------------------------------------------------
Structurally 'Thickened' Graphite Zone Identified
Our geoscientists have identified a graphitic zone consisting of
multi-folded graphitic strata with a surficially exposed strike
length of over 2 kilometres. This zone, called Molo, is
characterized by resistant ridges of graphitic schist, and abundant
graphitic schist float, with fracture-lined vanadium mineralization
yielding field XRF values as high as 0.7% V2O5. Geologic mapping
has revealed the individual graphitic ridges to be between 20 and
150 metres in width within this zone. EM31 surveys indicate the
graphite mineralization is pervasive in the area, and that the
mineralization is not always exposed. Wide-spaced drilling of 6
diamond drill holes conducted over a strike length of 1.2
kilometres, intersected graphitic mineralization to a vertical
depth of 75 metres with down-hole thicknesses between 60 and 150
metres in width. Graphite mineralization intersected in drill core
was open along strike, and at depth.
Craig Scherba, Vice President of Exploration commented, "The
graphitic zones we have identified in the Molo zone are exposed at
surface, and appear to have a graphitic carbon content as high, if
not higher than anything else we have seen on the properties. The
integration of airborne geophysics, coupled with EM31 ground
surveying, diamond drill intercepts and our geologic understanding
of the area, indicate that an aggressive exploration program is
warranted for the area".
To see a geophysical EM31 image of the Molo Zone, Click
here.
Vanadium Trend Extended On To JV Property by 30 km
The 21 km vanadium trend found on the Green Giant property has
now been increased by an additional 30 km on the Malagasy JV
property. This trend was delineated through the analysis of soil
samples with a hand-held XRF analyzer at 25 metre station
intervals, and 200 metre line spacing. XRF analysis was an
invaluable tool in delineating the original Green Giant vanadium
trend, and enables the Company to make 'real-time' exploration
decisions based on field results.
In the course of XRF soil analysis on the JV property, a 1.6
kilometre outcrop of graphitic schist, named the Seta zone, was
identified adjacent to the vanadium trend. Geologic mapping in the
area indicates that this zone is sub- horizontal, and roughly 20
metres in thickness.
To see the extent of the Vanadium Trend, Click here.
Analytical Results
Exploration activities during the course of the Phase I program
included 10 diamond drill holes (totalling 1157.5 metres) 16
trenches (totalling 1912 metres), and 132 grab samples. An
additional 19 diamond drill holes (totalling 2701 metres) and 518
grab samples were completed during the course of the Phase II
exploration program. All samples collected during the exploration
programs were submitted for graphitic carbon analysis.
To date, only one quarter of drill hole assays, and one fifth of
grab sample assays have been received. No trench sample analyses
have been received. Of the samples received, diamond drill core
assays as high as 21.0% carbon, and grab samples as high as 21.3%
carbon have been received, with the most significant intersection
being 7.46% carbon over 61.4 metres down-hole length. A summary
table of the significant drill hole intercepts is provided below.
For a complete assay list, please refer to the Company's
website.
----------------------------------------------------------------------------
Hole From To Hole From To
ID (m) (m) Intersection ID (m) (m) Intersection
FOND-
01 17.1 78.5 61.4m @ 7.46 %C including 19.4 27 7.6m @ 14.79 %C
including 32 39 7.0m @ 7.22 %C
including 57.5 61 3.5m @ 9.95 %C
including 62.5 77 14.5m @ 10.86 %C
including 72.8 74 1.2m @ 21.0 %C
----------------------------------------------------------------------------
FOTSY-
01 43 45.5 2.5m @ 8.10 %C
FOTSY-
01 51.8 62 10.2m @ 4.41 %C including 51.8 54.5 2.7m @ 5.12 %C
including 57.5 59 1.5m @ 6.20 %C
FOTSY-
01 94.5 101.2 6.7m @ 4.3 %C
----------------------------------------------------------------------------
FOTSY-
02 10.8 15.11 4.3m @ 6.22 %C
FOTSY-
02 23.93 34.7 10.77m @ 6.19 %C including 23.93 25.2 1.3m @ 6.45 %C
including 26.55 33.4 6.8m @ 7.45 %C
including 40.15 42.25 2.1m @ 5.95 %C
including 96.82 98 1.2m @ 6.03 %C
including 99.5 101 1.5m @ 5.91 %C
----------------------------------------------------------------------------
FOTSY-
03 21.5 31 9.5m @ 5.27 %C including 21.5 22.5 1.0m @ 5.04 %C
including 24.35 28 3.6m @ 7.30 %C
including 29.5 31 1.5m @ 5.78 %C
----------------------------------------------------------------------------
FOTSY-
04 33.42 35 1.6m @ 5.37 %C
FOTSY-
04 52 55 3.0m @ 7.91 %C
----------------------------------------------------------------------------
FOTSY-
05 11 12 1.0m @ 5.66 %C
FOTSY-
05 23.25 33 9.8m @ 12.02 %C
FOTSY-
05 43 48 5.0m @ 4.28 %C including 43 44 1.0m @ 5.48 %C
including 47 48 1.0m @ 5.19 %C
FOTSY-
05 54 63 9.0m @ 6.73 %C including 54 58.5 4.5m @ 8.48 %C
including 60.15 62.35 2.2m @ 7.26 %C
----------------------------------------------------------------------------
FOTSY-
05 73.5 80.5 7.0m @ 6.8 %C including 76.25 80 3.8m @ 9.54 %C
FOTSY-
06 8 34 26.0m @ 4.12 %C including 8 11.5 3.5m @ 5.28 %C
including 19.5 24.75 5.3m @ 5.28 %C
including 30.5 34 3.5m @ 6.42 %C
----------------------------------------------------------------------------
Next Steps
It would be appropriate at this time to comment on time lines
related to receipt of assays, and the need for metallurgical
analysis to fully outline the type and quality of the graphite on
the properties. The Company believes that after receiving assays it
is both prudent and necessary to wait for the metallurgical
analysis to fully inform the market of the potential of the
graphite identified to-date, but it should be noted that the
Company is comfortable in identifying the graphite as flake based
on visual observation and cursory testing. The Company will
endeavour to expedite the metallurgical process throughout its
exploration programs.
About Graphite
Graphite and diamonds are the only two naturally formed polymers
of carbon - graphite is a two-dimensional crystal structure,
whereas diamonds are a three dimensional structure.
Graphite is an excellent conductor of heat and electricity, and
has the highest natural strength and stiffness of any material. It
maintains its strength and stability to temperatures in excess of
3,600 degrees C and is very resistant to chemical attack. At the
same time it is one of the lightest of all reinforcing agents and
has high natural lubricity.
The U.S., who is a 100% importer of graphite, has joined China
and the European Union in classifying graphite as a critical
strategic material.
Graphite Markets
New & Emerging Uses for Graphite
-- Electronic Consumer Goods:
Millions of flexible graphite "heat spreaders" are used in consumer
electronics such as flat panel displays, notebook computers, laptops,
tablets, LED lighting and smart phones such as Apple's iPhone®. This
provides excellent cooling for the electronic components as it reduces
"hot spot" temperatures while boosting power which results in extended
product life and improved performance.
-- Lithium-ion Batteries:
Graphite is an essential component in these batteries which typically
require 11 to 13 times more graphite than lithium. Since these batteries
are smaller, lighter and more powerful than traditional batteries there
is currently a large shift to Li-ion batteries for consumer electronics
and hand-held tools. This is also the product of choice for both hybrid
electric vehicles (HEVs) and full electric vehicles (EVs) where the
batteries are much larger and the potential demand is substantial.
-- Green Energy Storage:
Significantly more graphite is used as a component in fuel cells and
Vanadium Redox Flow Batteries (VRFBs) which are utilized to store energy
derived from green initiatives such as solar and wind.
-- Pebble Bed Nuclear Reactors ("PBNR's"):
Graphite is now being used in PBNR's which are small, modular nuclear
reactors. The fuel is uranium dioxide which is encapsulated with
graphite and forms pebbles the size of tennis balls. They have
significantly lower capital and operating costs and cool naturally when
shut down thus greatly improving the operating safety factor.
-- Graphene:
This new miracle material is beginning to gain worldwide attention and
many in the scientific community speculate that it could revolutionize
the world we live in. It has remarkable optical, mechanical and
electrical properties which make it substantially stronger than steel
and at the same time is highly elastic. One research report in Science
Daily simply stated that graphene is, "the thinnest and strongest
material ever discovered."
-- Infrared defence and stealth bomber technology
Traditional Uses for Graphite
-- Steel Industry
Primary demand is tied to the steel industry where it is used as a liner
for ladles and crucibles, as a refractory material and as an additive to
the steel making process.
-- Automotive Sector
Graphite is used in brake linings, gaskets, and clutch materials.
-- General
Graphite is used in lubricants, fire retardants and as a reinforcement
in plastics
Tight Supply
-- World production of graphite is about 1.1 million tonnes tonnes per year
(Mtpy), which is almost as large as the nickel market (1.3 Mtpy), and
more than 50 times the size of the lithium or rare earth markets
-- 60%-70% of the world's graphite supply is amorphous (fine or powder) and
is used for traditional purposes such as automotive and steel making
-- 30%-40% is flake, which is essential for producing batteries,
specifically lithium-ion, and for use in consumer electronics
-- China currently produces around 75% of the world's graphite or about
800,000 tonnes of the estimated 1.1Mt produced in calendar 2010
-- This year, the British Geological Survey listed graphite, along with
antimony and rare earths, as most at risk of global supply disruption.
Graphite had a relative supply risk index of 7, compared with 8.5 for
antimony, the highest value on the index
The China Factor
-- Despite producing 75% of the world's graphite, most of its resources are
lower grade amorphous
-- China is now the biggest importer of graphite and has closed state-owned
enterprises this year to preserve its graphite resources
-- It has imposed a 20% export duty plus a 17% VAT, and instituted an
export licensing system to ensure supply to China's domestic economy
Robust Demand
-- Annual graphite demand is expected to increase by over 50% from 1.1
million tonnes to 1.5 million tonnes by 2020 based on the steel market
alone
-- Demand from batteries and high-tech applications are projected to be
dramatic. Lithium-ion batteries are projected to more than double the
demand for graphite to about 2.6 million tonnes by 2020
-- Industry analysts predict the discovery of Graphene will be a major
driver of graphite demand
Pricing
-- Graphite pricing is determined by two factors - flake size and purity -
with the premium product being large flake (+80 mesh), high carbon
(+94%) graphite
-- Like uranium and vanadium, there is a spot price for graphite that
provides an indication of longer-term trends but transactions are
primarily based on a direct and intimate relationship between the buyer
and seller
The Bottom Line
-- China's is creating serious supply concerns for the rest of the world
-- New graphite sources will be needed for both traditional and high-
tech/clean tech applications
Qualified Person
Craig Scherba, Vice President Exploration, P.Geol., is the
qualified person for the technical information provided in this
release.
Energizer to Exhibit at Cambridge House Investment Conference in
Vancouver - Booth 2019
The Company will be exhibiting at the 2012 Cambridge Vancouver
Resource Investment Conference on January 22-23, 2012 at the
Vancouver Convention Centre West. Energizer welcomes investors to
visit Booth 2019, where management will be available to discuss the
Green Giant vanadium and graphite project in detail.
About Energizer Resources
Energizer Resources Inc. is a mineral exploration and
development company based in Toronto, Canada, which is developing
its 100%-owned Green Giant Vanadium and Graphite Project in
conjunction with its Madagascar-ERG Joint Venture (Mauritius) Ltd
("JV Co") property. Energizer owns 75% of the industrials minerals
rights on the Malagasy Minerals (ASX:MGY) property as outlined in
the December 15, 2011 press release. The Green Giant Vanadium
deposit in addition with the JV grounds, is one of the largest
known vanadium deposits in the world. In addition to the Toronto
Stock Exchange (TSX:EGZ), the Company's common shares trade on the
U.S. Over-The-Counter Bulletin Board under the symbol, ENZR, and on
the Frankfurt Exchange under the symbol, YE5.
We seek Safe Harbour: This press release may contain
forward-looking statements that may involve a number of risks and
uncertainties. Actual events or results could differ materially
from expectations and projections set out herein.
(1) For the QEMSCAN analysis, graphite impregnated polished
epoxy grain mounts were prepared and analyzed using Particle Map
Analysis (PMA) which provides a statistically robust population of
mineral identification based on X-ray chemistry of minerals and
modal abundance. Chemical assay values were determined by Mintek
using LECO CS200 and Eltra CS2000 analyzers.
For more information, please visit our website at
www.energizerresources.com.
Contacts: Energizer Resources Inc. Brent Nykoliation Vice
President of Business Development Toll Free: 800.818.5442 or
416.364.4911bnykoliation@energizerresources.com Energizer Resources
Inc. Kirk McKinnon Chairman and CEO Toll Free: 800.818.5442 or
416.364.4911 www.energizerresources.com
Nextsource Materials (QB) (USOTC:NSRCF)
Historical Stock Chart
From Apr 2024 to May 2024
Nextsource Materials (QB) (USOTC:NSRCF)
Historical Stock Chart
From May 2023 to May 2024
