TORONTO, April 23, 2015 /CNW/ - IAMGOLD
Corporation ("IAMGOLD" or the "Company") today provided
additional drilling results from its 100% owned Boto Gold project
in eastern Senegal and an updated
resource estimate for its Essakane Mine, including Falagountou.
ESSAKANE MINE, BURKINA
FASO
The Company announced today an updated resource estimate in
accordance with National Instrument 43-101 for its Falagountou
deposit, part of its Essakane Mine, located in north Burkina Faso. The Falagountou mineral resource
estimate incorporates assay results from an additional 165 reverse
circulation and diamond drill holes totaling 15,065 metres
completed since the December 31, 2014
estimate reported by the Company.
The new indicated Essakane in-pit resource (100% basis,
including the Falagountou deposit) totals 129.5 million tonnes
averaging 1.20 grams of gold per tonne for 4.98 million ounces of
contained gold and an inferred resource of 10.8 million tonnes
averaging 1.38 grams of gold per tonne for 0.48 million ounces of
contained gold. The updated resource estimate represents a 6%
increase in indicated resources from the previously reported
estimate.
The updated Essakane resource estimate benefited from both
infill drilling that substantially upgraded the confidence of the
estimate through conversion of inferred resources to indicated
resources as well as step-out drilling to expand the overall
resource base of the Falagountou deposit.
The Falagountou deposit now hosts an indicated resource of 12.5
million tonnes averaging 1.52 grams of gold per tonne for 0.61
million ounces of contained gold and an inferred resource of 0.58
million tonnes averaging 2.12 grams of gold per tonne for 40,000
ounces of contained gold. This new indicated resource represents an
84% gold content increase at Falagountou compared to the previously
reported estimate.
Gordon Stothart, Executive Vice
President and Chief Operating Officer for IAMGOLD said, "The
additional higher grade material from the Falagountou deposit
should further enhance the value of the Essakane mine. We
expect that these additional indicated resources can extend
Essakane's peak production levels out beyond the previously
forecasted next four years."
An open pit optimization was run on the Falagountou deposit
estimated block model to constrain the resource and to support the
CIM requirement that mineral resources have reasonable prospects
for economic extraction. The resource estimate assumes a long-term
gold price of US$1500/ounce.
The table below presents the mineral resource (100% basis) for
Essakane, including the Falagountou deposit. Mineralized wireframes
were interpreted and used to constrain grade interpolation by
ordinary kriging with validation by inverse distance. The effective
date of this resource estimate is April 1,
2015 and includes all validated drill results.
ESSAKANE'S MINERAL RESOURCES (1) (2) (3)
|
December 31,
2014
|
April 1,
2015
|
|
Tonnes
(000s)
|
Grade
(g/t)
|
Ounces
Contained
(000s)
|
Tonnes
(000s)
|
Grade
(g/t)
|
Ounces
Contained
(000s)
|
Essakane Main Zone
(EMZ)
|
|
|
|
|
|
|
Indicated
Resources
|
116,942
|
1.16
|
4,369
|
116,942
|
1.16
|
4,369
|
Inferred
Resources
|
10,222
|
1.34
|
441
|
10,222
|
1.34
|
441
|
Falagountou
|
|
|
|
|
|
|
Indicated
Resources
|
7,490
|
1.38
|
333
|
12,520
|
1.52
|
613
|
Inferred
Resources
|
4,608
|
1.27
|
188
|
585
|
2.12
|
40
|
Consolidated
Essakane
|
|
|
|
|
|
|
Indicated
Resources
|
124,432
|
1.18
|
4,702
|
129,462
|
1.20
|
4,982
|
Inferred
Resources
|
14,830
|
1.32
|
628
|
10,807
|
1.38
|
480
|
(1)
|
Cutoffs based on
leached Au
|
(2)
|
Inside $1500/oz
Whittle pit shell optimized on indicated and
inferred
|
(3)
|
Consolidated EMZ
& Falagountou resources excluding Q1 2015 depletion
|
Next Steps
In 2015, the Company is completing an
exploration drilling program to test for further extensions to the
Falagountou deposit. The gold mineralization continues toward the
north and the south along the sediment-intrusive contact and
remains open in these directions where potential extension of the
deposit is possible. The drilling campaign commenced in March with
two drill rigs in operation and is expected to be completed in the
second quarter. The haul road is being completed and mining is
expected to begin at Falagountou in the second half of 2015.
About the Falagountou gold deposit
The Falagountou
deposit is located in NE Burkina
Faso, about 8 kilometres SE of the of Essakane EMZ gold
deposit. The gold mineralization is structurally controlled and is
closely associated with a broad zone of hydrothermal
quartz-calcite-chlorite alteration and deformation hosted in
sheared and brecciated rocks in the hanging-wall contacts between
sediment and intrusive rocks. (Figure 1)
BOTO GOLD PROJECT, SENEGAL
The Company has completed its planned infill drilling program
and is reporting assay results from 28 diamond drill holes totaling
6,292 metres of the 12,416 metres completed in 2015. The
assay results are provided in Table 1 and include the following
highlights:
Malikoundi prospect:
- Drillhole DBDD-2219: 61 metres grading 2.61 g/t
gold,
including 4 metres grading 8.44 g/t gold
including 2 metres grading 11.87 g/t gold
- Drillhole DBDD-2222: 11 metres grading 11.29 g/t
gold,
including 5 metres grading 21.61 g/t gold
- Drillhole DBDD-2266: 20 metres grading 6.52 g/t
gold
Including 4 metres grading 13.63 g/t gold
Including 3 metres grading 8.26 g/t gold
33 metres grading 4.28 g/t gold
Including 2 metres
grading 9.2 g/t gold
Including 2 metres grading 11.81 g/t gold
Including 6 metres grading 8.29 g/t gold
- Drillhole DBDD-2270: 48 metres grading 2.23 g/t
gold
A drill hole plan map is attached. (See Figure
2)
Craig MacDougall, Senior Vice
President, Exploration for IAMGOLD, stated, "The exploration team
has done an outstanding job to complete the infill drilling program
safely and on schedule. Importantly, the assay results
continue to confirm strong intervals of gold mineralization
exhibiting high grades over significant thickness from the core of
the Malikoundi deposit. With the infill program now complete,
we look forward to receiving the remaining results and updating the
mineral resource estimate."
The Boto Gold project comprises 236 square kilometres of
exploration licenses located in eastern Senegal along the Senegal-Mali
border. The geological setting of the project area is similar
to the prolific Sadiola and Loulo gold districts in adjacent
Mali, being underlain by highly
prospective, Birimian-aged metasedimentary, volcanic and intrusive
rocks along a seven-kilometre strike length of the Senegal-Mali
Shear Zone.
The project hosts an indicated resource of 22.8 million tonnes
averaging 1.7 grams of gold per tonne for 1.23 million ounces and
an inferred resource of 10.96 million tonnes averaging 1.8 grams of
gold per tonne for 635,000 ounces (see press release dated
February 18, 2015). A significant
percentage of the total resources are derived from the newly
discovered Malikoundi deposit which is the largest deposit
discovered to date on the property.
Next Steps
The Company's has completed its planned 50X50m infill
delineation campaign initiated in 2014 with the completion of
12,416 metres of diamond drilling in 2015. An updated resource
estimate is anticipated in the third quarter once the remaining
assay results have been received, validated, and incorporated into
the resource model. On site, drilling continues in support of
planned geotechnical and metallurgical sampling and testing
programs which are due for completion during the quarter.
Technical Information and Quality Control Notes
The drilling results for the Falagountou estimate located in
Burkina Faso contained in this
news release have been prepared in accordance with National
Instrument 43-101 Standards of Disclosure for Mineral Projects. The
sampling and assay data from drilling is monitored through the
implementation of a quality assurance - quality control (QA-QC)
program designed to follow industry best practice. Drill core (HQ
and NQ size) samples are selected by the Essakane geologists and
sawn in half with a diamond saw at the project site. Half of the
core is retained at the site for reference purposes. Sample
intervals are generally 1 to 1.5 meter in length. RC holes are
sampled at 1 meter intervals at the drill rig. Samples are
prepared at the Essakane site laboratory, and analyzed using
LeachWELL rapid cyanide leach on 1000g subsample bottle roll. Solid
residues are re-assayed using fire assay 50 grams charge whenever
the LeachWELL result exceed 0.3 ppm. In order to validate the
Essakane site laboratory results, 20% of pulps duplicates are
re-assayed for LeachWell at the umpire analytical laboratories at
Ouagadougou, Burkina Faso.
The drilling results for the Boto Gold Project in
Senegal contained in this news
release have been prepared in accordance with National Instrument
43-101 Standards of Disclosure for Mineral Projects. The sampling
of, and assay data from, drill core is monitored through the
implementation of a quality assurance - quality control (QA-QC)
program designed to follow industry best practice. Drill core (HQ
and NQ size) samples are selected by the IAMGOLD geologists and
sawn in half with a diamond saw at the project site. Half of the
core is retained at the site for reference purposes. Sample
intervals are generally 1 metre in length. Samples are prepared at
the Veritas Preparation Laboratory in Kedougou, Senegal and analyzed using a standard fire
assay with a 50 gram charge with an Atomic Absorption (AA) finish
at the Veritas Analytical Laboratory in Abidjan, Ivory Coast.
Qualified Persons
The mineral resource estimate for
the Falagountou deposit has been carried out by G Mining Services
Inc., an independent consultant, and is reported in accordance with
National Instrument 43-101 requirements and CIM Estimation Best
Practice Guidelines. The resource estimate was prepared by Réjean
Sirois, ing. Vice President, Geology and Resources, G Mining
Services Inc.
The information pertaining to Boto Gold in this news release
was prepared under the supervision of Craig
MacDougall, P.Geo., Senior Vice President, Exploration for
IAMGOLD. Mr. MacDougall is a Qualified Person as defined by
National Instrument 43-101.
For both Boto Gold and Falagountou, the technical information
has been included herein with the consent and prior review of the
above noted Qualified Person. The Qualified Person has verified the
data disclosed, and data underlying the information or opinions
contained herein.
Cautionary Notes to Investors Regarding the Use of
Resources
The Canadian Securities Administrators' National Instrument
43-101 ("NI 43-101") requires mining companies to disclose reserves
and resources using the subcategories of "proven" reserves,
"probable" reserves, "measured" resources, "indicated" resources
and "inferred" resources. Mineral resources that are not mineral
reserves do not demonstrate economic viability.
This news release uses the term "indicated resources".
Investors are cautioned not to assume that any part or all of
mineral deposits in this category will ever be converted into
reserves.
This news release also uses the term "inferred resources".
"Inferred resources" have a great amount of uncertainty as to their
existence, and great uncertainty as to their economic and legal
feasibility. It cannot be assumed that all or any part of an
inferred mineral resource will ever be upgraded to a higher
category. Under Canadian rules, estimates of inferred mineral
resources may not form the basis of feasibility or pre-feasibility
studies, except in rare cases. Investors are cautioned not to
assume that part or all of an inferred resource exists, or is
economically or legally mineable.
A mineral reserve is the economically mineable part of a
measured or indicated mineral resource demonstrated by at least a
preliminary feasibility study. This study must include adequate
information on mining, processing, metallurgical, economic and
other relevant factors that demonstrate, at the time of reporting,
that economic extraction can be justified. A mineral reserve
includes diluting materials and allows for losses that may occur
when the material is mined. A proven mineral reserve is the
economically mineable part of a measured mineral resource
demonstrated by at least a preliminary feasibility study. A
probable mineral reserve is the economically mineable part of an
indicated, and in some circumstances, a measured mineral resource
demonstrated by at least a preliminary feasibility study.
A mineral resource is a concentration or occurrence of
natural, solid, inorganic material, or natural, solid fossilized
organic material, including base and precious metals in or on the
Earth's crust in such form and quantity and of such a grade or
quality that it has reasonable prospects for economic extraction.
The location, quantity, grade, geological characteristics and
continuity of a mineral resource are known, estimated or
interpreted from specific geological evidence and knowledge. A
measured mineral resource is that part of a mineral resource for
which quantity, grade or quality, densities, shape and physical
characteristics are so well established that they can be estimated
with confidence sufficient to allow the appropriate application of
technical and economic parameters, to support production planning
and evaluation of the economic viability of the deposit. The
estimate is based on detailed and reliable exploration, sampling
and testing information gathered through appropriate techniques
from locations such as outcrops, trenches, pits, workings and drill
holes that are spaced closely enough to confirm both geological and
grade continuity. An indicated mineral resource is that part of a
mineral resource for which quantity, grade or quality, densities,
shape and physical characteristics can be estimated with a level of
confidence sufficient to allow the appropriate application of
technical and economic parameters to support mine planning and
evaluation of the economic viability of the deposit. The estimate
is based on detailed and reliable exploration and testing
information gathered through appropriate techniques from locations
such as outcrops, trenches, pits, workings and drill holes that are
spaced closely enough for geological and grade continuity to be
reasonably assumed. An inferred mineral resource is that part of a
mineral resource for which quantity and grade or quality can be
estimated on the basis of geological evidence and limited sampling
and reasonably assumed, but not verified, geological and grade
continuity. The estimate is based on limited information and
sampling gathered through appropriate techniques from locations
such as outcrops, trenches, pits, workings and drill holes. Mineral
resources which are not mineral reserves do not have demonstrated
economic viability. Investors are cautioned not to assume that part
or all of an inferred resource exists, or is economically or
legally mineable.
The SEC limits disclosure for U.S. reporting purposes to
mineral deposits that a company can economically and legally
extract or produce. IAMGOLD uses certain terms in this news
release, such as "measured," "indicated," or "inferred," which may
not be consistent with the reserve definitions established by the
SEC. U.S. investors are urged to consider closely the
disclosure in the IAMGOLD Annual Reports on Forms 40-F. You can
review and obtain copies of these filings from the SEC's website at
http://www.sec.gov/edgar.shtml or by contacting the Investor
Relations department.
Forward Looking Statement
This news release contains forward-looking statements. All
statements, other than of historical fact, that address activities,
events or developments that the Company believes, expects or
anticipates will or may occur in the future (including, without
limitation, statements regarding expected, estimated or
planned gold and niobium production, cash costs, margin expansion,
capital expenditures and exploration expenditures and
statements regarding the estimation of mineral resources,
exploration results, potential mineralization, potential mineral
resources and mineral reserves) are forward-looking statements.
Forward-looking statements are generally identifiable by use of the
words "may", "will", "should", "continue", "expect", "anticipate",
"estimate", "believe", "intend", "plan" or "project" or the
negative of these words or other variations on these words or
comparable terminology. Forward-looking statements are subject to a
number of risks and uncertainties, many of which are beyond the
Company's ability to control or predict, that may cause the actual
results of the Company to differ materially from those discussed in
the forward-looking statements. Factors that could cause
actual results or events to differ materially from current
expectations include, among other things, without limitation,
failure to meet expected, estimated or planned gold and niobium
production, cash costs, margin expansion, capital expenditures and
exploration expenditures and failure to establish estimated
mineral resources, the possibility that future exploration results
will not be consistent with the Company's expectations, changes in
world gold markets and other risks disclosed in IAMGOLD's most
recent Form 40-F/Annual Information Form on file with the United
States Securities and Exchange Commission and Canadian provincial
securities regulatory authorities. Any forward-looking statement
speaks only as of the date on which it is made and, except as may
be required by applicable securities laws, the Company disclaims
any intent or obligation to update any forward-looking
statement.
About IAMGOLD
IAMGOLD (www.iamgold.com) is a mid-tier mining company with four
operating gold mines on three continents. A solid base of strategic
assets in North and South America
and West Africa is complemented by
development and exploration projects and continued assessment of
accretive acquisition opportunities. IAMGOLD is in a strong
financial position with extensive management and operational
expertise.
Please note:
This entire news release may be accessed via fax, e-mail, IAMGOLD's
website at www.iamgold.com and through CNW Group's website at
www.newswire.ca. All material information on IAMGOLD can be found
at www.sedar.com or at www.sec.gov.
Si vous désirez obtenir la version française de ce communiqué,
veuillez consulter le
http://www.iamgold.com/French/Home/default.aspx.
Table 1: Boto
Project Drilling Results – Malikoundi Deposit
|
Hole#
|
UTM
(WGS84Zone29N)
|
AZ
|
DIP
|
EOH
|
From
|
To
|
Length
|
Grade
|
|
Easting
|
Northing
|
Elevation
|
(degrees)
|
(degrees)
|
(m)
|
(m)
|
(m)
|
(m)
|
(g/t Au)
|
DBDD-2219
|
241818
|
1379164
|
166
|
115
|
-60
|
330
|
133
|
138
|
5
|
1.85
|
|
|
|
|
|
|
|
152
|
213
|
61
|
2.61
|
including
|
|
|
|
|
|
|
170
|
174
|
4
|
8.44
|
including
|
|
|
|
|
|
|
178
|
180
|
2
|
11.87
|
|
|
|
|
|
|
|
221
|
234
|
13
|
1.19
|
|
|
|
|
|
|
|
252
|
260
|
8
|
1.81
|
|
|
|
|
|
|
|
296
|
299
|
3
|
1.46
|
|
|
|
|
|
|
|
308
|
330
|
22
|
2.94
|
DBDD-2222
|
241967
|
1379103
|
165
|
115
|
-60
|
238.5
|
12
|
23
|
11
|
11.29
|
including
|
|
|
|
|
|
|
14
|
19
|
5
|
21.61
|
|
|
|
|
|
|
|
33
|
49
|
16
|
4.10
|
including
|
|
|
|
|
|
|
36
|
39
|
3
|
14.11
|
|
|
|
|
|
|
|
156
|
165
|
9
|
1.05
|
|
|
|
|
|
|
|
189
|
200
|
11
|
1.38
|
DBDD-2223
|
242001
|
1379079
|
165
|
115
|
-60
|
215
|
75
|
92
|
17
|
1.07
|
|
|
|
|
|
|
|
159
|
161
|
2
|
1.02
|
DBDD-2224
|
242048
|
1379060
|
164
|
115
|
-60
|
180
|
81
|
85
|
4
|
1.10
|
|
|
|
|
|
|
|
174
|
176
|
2
|
1.07
|
DBDD-2229
|
241954
|
1379216
|
165
|
115
|
-60
|
200
|
28
|
45
|
17
|
2.83
|
|
|
|
|
|
|
|
127
|
135
|
8
|
1.16
|
|
|
|
|
|
|
|
185
|
187
|
2
|
1.36
|
DBDD-2230
|
242000
|
1379192
|
165
|
115
|
-60
|
160
|
No Significant
intersection
|
DBDD-2231
|
242041
|
1379168
|
165
|
115
|
-60
|
110
|
No Significant
intersection
|
DBDD-2235
|
241908
|
1379349
|
165
|
115
|
-60
|
230
|
18
|
32
|
14
|
2.16
|
|
|
|
|
|
|
|
78
|
103
|
25
|
0.68
|
|
|
|
|
|
|
|
169
|
171
|
2
|
1.15
|
DBDD-2236
|
241952
|
1379326
|
165
|
115
|
-60
|
190
|
No Significant
intersection
|
DBDD-2237
|
241998
|
1379306
|
165
|
115
|
-60
|
145
|
46
|
53
|
7
|
1.19
|
DBDD-2238
|
241770
|
1379529
|
165
|
115
|
-60
|
265
|
154
|
171
|
17
|
2.23
|
|
|
|
|
|
|
|
192
|
200
|
8
|
1.22
|
|
|
|
|
|
|
|
208
|
212
|
4
|
1.06
|
|
|
|
|
|
|
|
222
|
246
|
24
|
0.64
|
DBDD-2239
|
241821
|
1379506
|
165
|
115
|
-60
|
230
|
79
|
108
|
29
|
1.33
|
|
|
|
|
|
|
|
120
|
122
|
2
|
3.59
|
|
|
|
|
|
|
|
137
|
148
|
11
|
1.10
|
|
|
|
|
|
|
|
176
|
187
|
11
|
0.79
|
DBDD-2240
|
241910
|
1379471
|
165
|
115
|
-60
|
170
|
27
|
32
|
5
|
8.23
|
|
|
|
|
|
|
|
125
|
129
|
4
|
1.12
|
|
|
|
|
|
|
|
163
|
165
|
2
|
1.23
|
DBDD-2241
|
241821
|
1379643
|
165
|
115
|
-60
|
205
|
138
|
151
|
13
|
0.70
|
DBDD-2242
|
241874
|
1379608
|
165
|
115
|
-60
|
200
|
39
|
49
|
10
|
5.21
|
|
|
|
|
|
|
|
40
|
50
|
10
|
4.48
|
including
|
|
|
|
|
|
|
40
|
42
|
2
|
19.95
|
|
|
|
|
|
|
|
124
|
126
|
2
|
2.03
|
DBDD-2243
|
241919
|
1379587
|
165
|
115
|
-60
|
155
|
No Significant
intersection
|
DBDD-2244
|
241869
|
1379746
|
164
|
115
|
-60
|
173
|
25
|
29
|
4
|
1.52
|
|
|
|
|
|
|
|
36
|
41
|
5
|
1.19
|
DBDD-2245
|
241729
|
1379549
|
165
|
115
|
-60
|
305
|
209
|
225
|
16
|
2.31
|
|
|
|
|
|
|
|
249
|
259
|
10
|
1.06
|
|
|
|
|
|
|
|
268
|
289
|
21
|
0.77
|
DBDD-2246
|
241829
|
1379766
|
164
|
115
|
-60
|
140
|
77
|
79
|
2
|
4.29
|
DBDD-2249
|
241875
|
1379807
|
164
|
115
|
-60
|
80
|
No Significant
intersection
|
DBDD-2250
|
241957
|
1379768
|
164
|
115
|
-60
|
90
|
No Significant
intersection
|
DBDD-2251
|
242004
|
1379747
|
165
|
115
|
-60
|
45
|
No Significant
intersection
|
DBDD-2260
|
241681
|
1379344
|
165
|
115
|
-60
|
445
|
282
|
316
|
34
|
1.62
|
|
|
|
|
|
|
|
325
|
336
|
11
|
1.95
|
|
|
|
|
|
|
|
415
|
432
|
17
|
1.33
|
Table 1: Boto
Project Drilling Results – Malikoundi Deposit
|
Hole#
|
UTM
(WGS84Zone29N)
|
AZ
|
DIP
|
EOH
|
From
|
To
|
Length
|
Grade
|
|
Easting
|
Northing
|
Elevation
|
(degrees)
|
(degrees)
|
(m)
|
(m)
|
(m)
|
(m)
|
(g/t Au)
|
DBDD-2261
|
241727
|
1379323
|
166
|
115
|
-60
|
415
|
228
|
236
|
8
|
1.10
|
|
|
|
|
|
|
|
245
|
264
|
19
|
0.65
|
|
|
|
|
|
|
|
270
|
274
|
4
|
1.87
|
|
|
|
|
|
|
|
403
|
415
|
12
|
2.07
|
DBDD-2262
|
242088
|
1379155
|
165
|
115
|
-60
|
50
|
No Significant
intersection
|
DBDD-2266
|
241639
|
1379254
|
166
|
115
|
-60
|
465
|
334
|
348
|
14
|
1.65
|
|
|
|
|
|
|
|
377
|
397
|
20
|
6.52
|
including
|
|
|
|
|
|
|
379
|
383
|
4
|
13.63
|
including
|
|
|
|
|
|
|
391
|
394
|
3
|
8.26
|
|
|
|
|
|
|
|
408
|
413
|
5
|
2.24
|
|
|
|
|
|
|
|
432
|
465
|
33
|
4.28
|
including
|
|
|
|
|
|
|
443
|
445
|
2
|
9.20
|
including
|
|
|
|
|
|
|
448
|
450
|
2
|
11.81
|
including
|
|
|
|
|
|
|
459
|
465
|
6
|
8.29
|
DBDD-2267
|
241683
|
1379233
|
166
|
115
|
-60
|
430
|
303
|
325
|
22
|
0.64
|
|
|
|
|
|
|
|
348
|
381
|
33
|
1.74
|
|
|
|
|
|
|
|
398
|
410
|
12
|
2.47
|
DBDD-2270
|
241688
|
1379177
|
166
|
115
|
-60
|
430
|
297
|
345
|
48
|
2.23
|
|
|
|
|
|
|
|
398
|
401
|
3
|
1.02
|
- Drill hole intercepts are calculated using a minimum down-hole
length of 2 meters, a cut-off grade of 0.5 g/t gold, a global assay
cap of 25 g/t gold and may include up to 5 metres of internal
dilution.
- Higher grade sub-intervals are reported for intervals equal to
or exceeding an 8.0 g/t gold cut-off grade and are calculated using
the same parameters as described above.
- The true widths of intersections are unknown at this time, but
are interpreted to approximate the reported downhole lengths.
- Only downhole intervals exceeding 10m are reported for drill
hole intercepts grading less than 1.0 g/t gold.
- Assay results for DBDD-2247, DBDD-2248, DBDD-2252 to DBDD-2258,
DBDD-2263 to DBDD-2265, DBDD-2268, DBDD-2269 and DBDD-2271 to
DBDD-2281 are pending.
SOURCE IAMGOLD Corporation