CyberOptics Unveils SQ3000-DD™ 3D AOI with Dual MRS Sensors at NEPCON Shenzhen
August 01 2017 - 9:00AM
Business Wire
Extension of the Award-Winning SQ3000 Platform
Maximizes Flexibility and Increases Throughput
CyberOptics® Corporation (NASDAQ: CYBE), a leading global
developer and manufacturer of high-precision 3D sensing technology
solutions, will unveil the new SQ3000-DD 3D Automated Optical
Inspection (AOI) system with two Multi-Reflection Suppression (MRS)
Sensors in Booth 1J45 at NEPCON South China, scheduled to take
place August 29-31, 2017 at the Shenzhen Convention &
Exhibition Center.
This Smart News Release features multimedia.
View the full release here:
http://www.businesswire.com/news/home/20170801005419/en/
CyberOptics Corporation will unveil the
new SQ3000-DD 3D Automated Optical Inspection (AOI) system with two
Multi-Reflection Suppression (MRS) Sensors in Booth 1J45 at NEPCON
South China. (Photo: CyberOptics Corporation)
The dual lane, dual sensor system is an extension of the
award-winning SQ3000 3D AOI platform, deemed best in class. The new
SQ3000-DD 3D AOI maximizes flexibility catering to varying PCB
widths. This unique design provides the ability to inspect high
volume assemblies, the convenience of inspecting different
assemblies and board sizes simultaneously on different lanes, or
even switching from dual lane to single lane mode to inspect very
large boards.
Not only does the SQ3000-DD provide the PCB inspection
flexibility, it also provides the flexibility to choose two of the
same or two different proprietary MRS sensors, both of which
meticulously identify and reject multiple reflections caused by
shiny components and reflective solder joints. The new Ultra-High
Resolution MRS sensor option provides an even finer resolution than
the standard, delivering superior inspection performance ideally
suited for 0201 metric and microelectronics applications where an
even greater degree of accuracy and inspection reliability is
critical. The unique architecture of both MRS sensor options
simultaneously captures and transmits multiple images in parallel,
while highly sophisticated 3D fusing algorithms merge the images
together, delivering microscopic image quality at production
speed.
“We have extended the MRS-enabled SQ3000 3D AOI platform to
offer a dual lane, dual sensor solution,” said Dr. Subodh Kulkarni,
President and CEO, CyberOptics. “This flexibility will allow our
customers to further increase their productivity with high volume
throughput, while relying on the unprecedented combination of
speed, accuracy and ease-of-use.”
Also on display, the QX250i simultaneous double-sided AOI system
offers fast, flexible and high performance inspection for all
applications, and is ideally suited for pre-reflow and selective
solder inspection. The top and bottom high-resolution Strobed
Inspection Modules (SIMs) with enhanced illumination provide a
single platform for the inspection and defect review process that
shortens the production line and drives approximately 50 percent
productivity improvement.
The SE600 3D SPI system delivers ‘true’ volume measurement and
world-class usability. Designed with a state-of-the-art dual
illumination sensor, it offers the best repeatability and
reproducibility – even on the smallest paste deposits. The
award-winning software offers full touch screen capability and
world-class user experience for easy, flawless inspection.
For more information, visit www.cyberoptics.com.
About CyberOptics
CyberOptics Corporation (NASDAQ: CYBE) is a leading global
developer and manufacturer of high precision sensing technology
solutions. CyberOptics sensors are being used in general
purpose metrology and 3D scanning, surface mount technology
(SMT) and semiconductor markets to significantly improve
yields and productivity. By leveraging its leading edge
technologies, the company has strategically established itself as a
global leader in high precision 3D sensors, allowing CyberOptics to
further increase its penetration of its key vertical markets.
Headquartered in Minneapolis, Minnesota, CyberOptics conducts
worldwide operations through its facilities in North America, Asia
and Europe.
Statements regarding the Company’s anticipated performance are
forward-looking and therefore involve risks and uncertainties,
including but not limited to: market conditions in the global SMT
and semiconductor capital equipment industries; the timing of
orders and shipments of our products, particularly our 3D
MRS-enabled AOI systems; increasing price competition and price
pressure on our product sales, particularly our SMT systems; the
level of orders from our OEM customers; the availability of parts
required to meet customer orders; unanticipated product development
challenges; the effect of world events on our sales, the majority
of which are from foreign customers; rapid changes in technology in
the electronics markets; product introductions and pricing by our
competitors; the success of our 3D technology initiatives; the
success of CyberGage360; and other factors set forth in the
Company’s filings with the Securities and Exchange Commission.
View source
version on businesswire.com: http://www.businesswire.com/news/home/20170801005419/en/
CyberOpticsCarla Furanna,
952-820-5837cfuranna@cyberoptics.com
CyberOptics (NASDAQ:CYBE)
Historical Stock Chart
From Mar 2024 to Apr 2024
CyberOptics (NASDAQ:CYBE)
Historical Stock Chart
From Apr 2023 to Apr 2024