SAN JOSE, Calif., Oct. 18, 2016 /PRNewswire/ -- Cadence Design
Systems, Inc. (NASDAQ: CDNS) today announced it will showcase
ARM®-optimized solutions from chips to boards to systems at ARM
TechCon 2016. The event is being held October 25-27, 2016, in Santa Clara, Calif., with Cadence®, a diamond
sponsor, in booth 200. To register for the conference, visit
www.armtechcon.com.
WHAT: Cadence and its customers are scheduled to deliver
several presentations developed for the ARM community. The speaking
sessions are as follows:
- Achieving the Best PPA for a FinFET ARM Mali™-G71 GPU:
Wednesday, October 26, 10:30 a.m., Room M1, Zengfu Wang, physical
designer, HiSilicon
- Design Tips and Tricks to Achieve Optimal PPA for 10nm ARM
Cortex®-A73 Processor: Wednesday,
October 26, 11:30 a.m., Room
M1, Amit Jain, deputy director, High
Performance Technology, MediaTek
- Achieving Last Mile Signoff Closure in ARM Cortex-M Based
Mixed-Signal Designs: Wednesday, October
26, 2:30 p.m., Room M1, Amod
Srvastava, principal design engineer, NXP
- High-Performance Implementation of ARM Cortex-A53
Processor: Wednesday, October 26,
3:30 p.m., Room M1, Jay Um, senior manager of Foundry Marketing
& Business Development, Samsung, and YK Lee, product
engineering director of R&D Foundry, Cadence
- From IoT Idea to Silicon, Faster!: Wednesday, October 26, 4:30 p.m., Room M1, Mike Eftimakis, IoT product
manager, ARM and Ian Dennison,
senior group director, R&D, Cadence
- Characterization of Bitcells/Std. Cells for ARM Cores Using
Massively Parallel Field Solver (3D) for FinFET Designs:
Thursday, October 27, 10:30 a.m., Ballroom F, Sreenivas Aluru, staff design engineer, Process
Technology Group, ARM Physical IP Division, and Hitendra Divecha, product management director,
Cadence
- Helping Designers from Concept to Silicon: Thursday, October 27, 11:30 a.m., Room M3, Phil
Burr, CPU product marketing manager, ARM and Kevin Yee, IP group strategic marketing
director, Cadence
- Fast, Scalable and Energy-Efficient I/O Solutions for
ARM-Based SoCs: Thursday, October
27, 1:30 p.m., Ballroom G,
Ashwin Matta, senior product
marketing manager, ARM, Andrew
Swaine, senior principal engineer, ARM and Gopi
Kirshnamurthy, IP architect, Cadence
- Modeling Performance Use Cases with Traffic Profiles Over
ARM AMBA® Interfaces: Thursday,
October 27, 3:30 p.m.,
Ballroom G, Jeff Defilippi, senior
product manager, ARM, Stewart
Penman, solutions architect, Cadence, and Yaron Serfaty, senior software engineering
manager, Cadence
Visit the Cadence "Expert Bar" in booth 200, where attendees can
hold in-depth discussions on a variety of design challenge topics
with Cadence subject matter experts. Throughout the two exhibit
days, experts will be available on topics such as IoT design,
embedded software debug and digital implementation of ARM IP. To
see the full list of topics, visit the Cadence events website at
www.cadence.com/go/techcon2016.
WHEN: ARM TechCon is scheduled for October 25-27, 2016.
WHERE: Santa Clara
Convention Center in Santa Clara,
Calif. Cadence is located in booth 200.
About Cadence
Cadence enables global electronic design innovation and plays an
essential role in the creation of today's integrated circuits and
electronics. Customers use Cadence software, hardware, IP and
services to design and verify advanced semiconductors, consumer
electronics, networking and telecommunications equipment, and
computer systems. The company is headquartered in San Jose, Calif., with sales offices, design
centers and research facilities around the world to serve the
global electronics industry. More information about the company,
its products and its services is available at www.cadence.com.
© 2016 Cadence Design Systems, Inc. All rights reserved
worldwide. Cadence, the Cadence logo and the other Cadence marks
found at www.cadence.com/go/trademarks are trademarks or registered
trademarks of Cadence Design Systems, Inc. ARM, AMBA, and
Cortex are registered trademarks of ARM Limited (or its
subsidiaries) in the EU and/or elsewhere. Mali is a trademark of ARM Limited (or its
subsidiaries) in the EU and/or elsewhere. All rights reserved.
All other trademarks are the property of their respective
owners.
For more information, please contact:
Cadence Newsroom
408-944-7039
newsroom@cadence.com
Logo -
http://photos.prnewswire.com/prnh/20140102/SF39436LOGO
To view the original version on PR Newswire,
visit:http://www.prnewswire.com/news-releases/media-alert-cadence-enables-customer-innovation-with-arm-optimized-solutions-from-chips-to-boards-to-systems-at-arm-techcon-2016-300346596.html
SOURCE Cadence Design Systems, Inc.