Deep Drilling Intersects 18.03 g/t over 5.70 metres; Near-Mine
Lateral Drilling Intersects 33.32 g/t over 2.60 metres and 9.99 g/t
over 6.65 metres
TORONTO, May 5, 2016 /CNW/ - Richmont Mines Inc. (TSX -
NYSE MKT: RIC) ("Richmont" or the "Corporation"), is providing an
update on the previously announced Island Gold exploration drilling
program (Figure 1), which continues to demonstrate the significant
potential of the cornerstone Island Gold Mine.
The exploration drilling program commenced in September 2015 and is now focused on three key
priorities: 1) Testing the lateral continuity of the known deposit
to potentially extend mine life above the 1,000 metre level; 2)
following up on gold intersections down plunge that support the
potential for an extension of the deposit between the 1,000 and
1,500 metre levels; and 3) testing high-priority regional gold
targets elsewhere across the prospective Island Gold property.
"These positive results on the eastern extension along strike,
directly adjacent to the main deposit area, could be incorporated
into our near-term mine plan. We are also pleased to report
significant intersections further east, approximately one kilometer
from the main deposit that we will continue to explore." stated
Renaud Adams, President and CEO. He
continued, "The deep directional drilling program continues to
confirm the higher-grade, wider mineralized zones at depth below
the 1,000 metre level. We are very encouraged that all of the holes
successfully intercepted the mineralized structure and that the
average grade and thickness continue to be consistent at
depth."
"We are very pleased with the positive drill intercepts from the
eastern lateral exploration as they continue to indicate that the
mine deposit remains open to the east." stated Daniel Adam, Vice-President, Exploration. He
continued, "The deep directional drilling program continues to
intersect the main structure with the results to date confirming
that the zone is still robust and open in all directions. Our
broader exploration initiative across the property has given us
some very interesting initial results below the old Kremzar mine,
which will support additional drilling in this area. Our aggressive
exploration initiatives are meeting with success and we are
excited by the potential to identify additional resources along
strike, at depth and elsewhere on the larger Island Gold Mine
property."
Highlights from the drilling program to date include:
Lateral Exploration (Figure 2)
Exploration drilling in 2015 discovered that the favourable Island
Gold mineralized structure extends to the east of the main deposit
area above the 1,000 metre level. The current drilling program
successfully demonstrates the potential to increase the resource
inventory to the east, as well as the potential for vertical
extensions of the previously defined resource blocks in the
Extension 1 and Extension 2 areas of the mine. The focus remains on
further identifying the potential to extend the Phase 1 mine life
in this area to the east, along strike of the main deposit and
above the 1,000 metre level.
The planned 56,000 metre lateral exploration program is expected
to be completed in the second quarter, with approximately 46,800
metres completed to date. Drilling is being conducted from surface
(9,500 metres) from the exploration drifts on the 450 and 620
metre levels (36,000 metres), from the 190 metre level (5,500
metres) and from the 340 metre level (5,000 metres). The program is
expected to be completed in the second quarter.
Highlights include (all results are reported with estimated true
width and high grade capped at 95 g/t gold):
- Hole 620-536-32: 11.14 g/t gold over 2.15 metres
- Hole 620-536-32: 11.14 g/t gold over 2.15 metres
- Hole 620-550-16: 6.22 g/t over 2.28 metres
- Hole 620-550-17: 6.35 g/t gold over 3.29 metres
- Hole 340-580-11: 8.07 g/t gold over 2.07 metres (parallel
zone)
- Hole 340-580-11: 15.27 g/t gold over 1.64 metres
- Hole 340-588-01: 17.60 g/t gold over 1.79 metres (parallel
zone)
- Hole 340-588-01: 9.99 g/t gold over 6.65 metres
- Hole 340-588-02: 8.37 g/t gold over 1.85 metres (parallel
zone)
- Hole 340-588-03: 5.16 g/t gold over 6.93 metres (parallel
zone)
- Hole 340-588-03: 11.36 g/t gold over 1.26 metres (parallel
zone)
- Hole GD-590-02: 33.32 g/t gold over 2.60 metres
- Hole GD-630-01: 12.84 g/t gold over 0.98 metres
Due to the significantly favourable results from this recent
drilling to the east, better access for drilling, and its proximity
to the existing mining operations, drilling to test the potential
extension to the west of the known Island Gold deposit will be
deferred until a subsequent program.
Deep Directional Drilling (Figure 3)
The deep directional drilling program was designed to test the down
plunge extension of the deposit between the 860 and 1,500 metre
levels and to follow-up on a single deep hole from surface that
intersected 19.87 g/t gold over 3.93 metres at a depth of 1,200
metres. The objective of the deep drilling program is to test the
deposit at depth and to increase confidence in the vertical
extension of the deposit for significant potential resource
growth.
High grade gold values continue to be intersected, including
18.03 g/t gold over 5.70 metres, 14.71 g/t gold over 1.53 metres
and 11.72 g/t gold over 4.80 metres, which increase our confidence
of the interpreted high grade zone at depth. To date, approximately
16,000 metres (15 holes) of the planned 23,000 metres (30 holes) of
drilling have been completed, including 3 pilot holes and 12 wedged
holes. A fourth drill was added to support the advancement of the
drilling program that will focus on targets to the west of the
first dyke that marks the limit between the Main Zone and Extension
1 areas. As a result, a further 5,000 metres of drilling have been
added to the program, which is expected to be completed in the
third quarter.
All of the 15 holes completed to date intersected the main
mineralized structure and 60% (9 holes of 15) intersected gold
values greater than 4.0 g/t gold over estimated true widths greater
than 4.0 metres. The equal weighted average of these 9 holes,
considering grades and true width, is respectively 12.04 g/t gold
over 5.06 metres.
Highlights include (all results are reported with estimated true
width and high grade capped at 95 g/t gold):
- Hole MH2A: 18.03 g/t gold over 5.70 metres
- Hole MH2A-1: 14.71 g/t gold over 1.53 metres
- Hole MH1-5: 11.72 g/t gold over 4.8 metres
- Hole MH3-5: 6.03 g/t gold over 7.07 metres
Regional Surface Exploration (Figure 4)
Drilling completed in the old Kremzar Mine area tested the
extension of the previously mined mineralized zone at depth, with
2,655 metres of drilling (3 holes) completed to date. Results
confirm the extension of the mineralized quartz veins at depth
(Main zone and subsidiary zones) and a significant new gold zone of
9.71 g/t gold over 8.00 metres (core length) was intersected in
hole KZ-16-02 at a vertical depth of about 600 metres.
Highlights include:
- Hole KZ-16-01: 36.97 g/t gold over 0.80 metres (core length,
subsidiary vein, about 230 metres below the bottom of the
ramp)
- Hole KZ-16-01: 27.05 g/t gold over 0.61 metres (core length,
subsidiary vein, about 295 metres below the bottom of the
ramp)
- Hole KZ-16-01: 6.49 g/t gold over 1.97 metres (core length,
subsidiary vein, about 325 metres below the bottom of the
ramp)
- Hole KZ-16-02: 9.71 g/t gold over 8.00 metres (core length,
subsidiary vein, about 350 metres below the bottom of the ramp),
including 20.76 g/t gold over 3.32 metres (core length)
About Richmont Mines Inc.
Richmont Mines has produced
over 1.6 million ounces of gold from its operations in Quebec, Ontario and Newfoundland since beginning production. The
Corporation currently produces gold from the Island Gold Mine in
Ontario, and the Beaufor Mine in
Quebec. The Corporation is also
advancing development of the significant high-grade resource
extension at depth of the Island Gold Mine in Ontario. With 25 years of experience in gold
production, exploration and development, and prudent financial
management, the Corporation is well-positioned to cost-effectively
build its Canadian reserve base and to successfully enter its next
phase of growth. Richmont routinely posts news and other important
information on its website (www.richmont-mines.com).
Forward-Looking Statements
This news release contains
forward-looking statements that include risks and uncertainties.
When used in this news release, the words "estimate", "project",
"anticipate", "expect", "intend", "believe", "hope", "may" and
similar expressions, as well as "will", "shall" and other
indications of future tense, are intended to identify
forward-looking statements. The forward-looking statements are
based on current expectations and apply only as of the date on
which they were made. Except as may be required by law, the
Corporation undertakes no obligation and disclaims any
responsibility to publicly update or revise any forward-looking
statements or information, whether as a result of new information,
future events or otherwise.
The factors that could cause actual results to differ materially
from those indicated in such forward-looking statements include
changes in the prevailing price of gold, the Canadian-United States
exchange rate, grade of ore mined and unforeseen difficulties in
mining operations that could affect revenue and production costs.
Other factors such as uncertainties regarding government
regulations could also affect the results. Other risks may be set
out in Richmont Mines' Annual Information Form, Annual Reports and
periodic reports. The forward-looking information contained herein
is made as of the date of this news release.
Cautionary note to US investors concerning resource
estimates
Information in this press release is intended to
comply with the requirements of the Toronto Stock Exchange and
applicable Canadian securities legislation, which differ in certain
respects with the rules and regulations promulgated under the
United States Securities Exchange Act of 1934, as amended
("Exchange Act"), as promulgated by the SEC. The Reserve and
Resource estimates in this press release were prepared in
accordance with Regulation 43‑101 adopted by the Canadian
Securities Administrators. The requirements of
Regulation 43-101 differ significantly from the requirements
of the United States Securities and Exchange Commission (the
"SEC").
U.S. Investors are urged to consider the disclosure in our
annual report on Form 20-F, File No. 001-14598, as filed with the
SEC under the Exchange Act, which may be obtained from us (without
cost) or from the SEC's web site: http://sec.gov/edgar.shtml.
Regulation 43-101
The geological data in this news
release has been reviewed by Mr. Daniel
Adam, Geo., Ph.D., Vice-President, Exploration, an employee
of Richmont Mines Inc., and a qualified person as defined by
Regulation 43-101.
LATERAL
EXPLORATION
(East of Main
Zone)
|
|
Hole
Number
|
Length
(metres)
|
From
(metres)
|
To
(metres)
|
True Width
(metres)
|
Uncut
Grade
(g/t
Au)
|
Cut
Grade
(g/t
Au)
|
Zone
|
Vertical depth of
Intersection (metres)
|
|
|
620-531-33
|
309
|
252.41
|
255.80
|
2.24
|
2.17
|
2.17
|
C
|
790
|
|
620-536-32
|
351
|
264.00
|
267.50
|
2.15
|
11.14
|
11.14
|
C
|
809
|
|
620-543-19
|
150
|
109.50
|
112.25
|
2.41
|
2.53
|
2.53
|
E1E
|
572
|
|
620-543-20
|
180
|
152.14
|
155.00
|
2.77
|
4.80
|
4.80
|
E1E
|
630
|
|
620-543-21
|
201
|
167.28
|
169.96
|
2.45
|
2.48
|
2.48
|
E1E
|
643
|
|
620-543-22
|
220
|
-
|
-
|
-
|
NO SIGNIFICANT
VALUE
|
-
|
-
|
|
|
620-543-23
|
222
|
180.13
|
183.14
|
2.71
|
0.70
|
0.70
|
E1E
|
671
|
|
620-550-12
|
174
|
120.19
|
123.84
|
3.45
|
1.46
|
1.46
|
E1E
|
572
|
|
620-550-13
|
330
|
202.45
|
205.50
|
2.63
|
2.04
|
2.04
|
E1E
|
690
|
|
620-550-14
|
300
|
180.00
|
184.07
|
3.71
|
1.60
|
1.60
|
E1E
|
635
|
|
620-550-15
|
375
|
296.71
|
300.50
|
2.36
|
2.52
|
2.52
|
E1E
|
819
|
|
620-550-16
|
330
|
272.70
|
276.00
|
2.28
|
6.22
|
6.22
|
E1E
|
778
|
|
620-550-17
|
201
|
132.71
|
136.40
|
3.29
|
6.35
|
6.35
|
E1E
|
591
|
|
620-556-01
|
315
|
278.14
|
281.27
|
2.15
|
3.92
|
3.92
|
E1E
|
790
|
|
340-580-10
|
684
|
580.38
|
582.63
|
0.94
|
0.64
|
0.64
|
X
|
815
|
|
340-580-11
|
534
|
270.20
|
271.60
|
0.78
|
13.43
|
13.43
|
X
|
528
|
|
|
|
277.78
|
281.51
|
2.07
|
10.03
|
8.07
|
X
|
535
|
|
|
including
|
278.38
|
278.68
|
0.17
|
119.42
|
95.00
|
|
|
|
|
|
338.00
|
340.94
|
1.64
|
15.27
|
15.27
|
E1E
|
579
|
|
|
including
|
339.30
|
339.70
|
0.22
|
77.25
|
77.25
|
|
|
|
340-580-12
|
225
|
145.36
|
150.14
|
3.89
|
1.21
|
1.21
|
E1E
|
394
|
|
340-588-01
|
597
|
277.65
|
280.85
|
1.79
|
17.60
|
17.60
|
X
|
528
|
|
|
|
298.75
|
310.50
|
6.65
|
9.99
|
9.99
|
E1E
|
546
|
|
340-588-02
|
862
|
183.00
|
187.42
|
1.85
|
9.78
|
8.37
|
X
|
475
|
|
|
including
|
183.64
|
183.94
|
0.13
|
115.75
|
95.00
|
|
|
|
|
|
659.00
|
663.00
|
1.66
|
0.08
|
0.08
|
E1E
|
872
|
|
340-588-03
|
891
|
174.60
|
196.05
|
6.93
|
8.97
|
5.16
|
X
|
485
|
|
|
including
|
175.32
|
175.63
|
0.10
|
49.27
|
49.27
|
|
|
|
|
including
|
195.33
|
196.05
|
0.23
|
208.34
|
95.00
|
|
|
|
|
|
357.55
|
361.50
|
1.26
|
11.36
|
11.36
|
X
|
640
|
|
|
including
|
357.55
|
358.00
|
0.14
|
42.58
|
42.58
|
|
|
|
340-588-04
|
283
|
168.12
|
175.96
|
5.57
|
2.84
|
2.84
|
E1E
|
422
|
|
340-588-05
|
665
|
380.00
|
390.00
|
4.14
|
0.98
|
0.98
|
E1E
|
623
|
|
340-588-06
|
702
|
227.80
|
235.90
|
2.68
|
3.87
|
3.87
|
X
|
516
|
|
|
|
385.10
|
391.40
|
2.12
|
1.38
|
1.38
|
E1E
|
648
|
|
340-588-07
|
378
|
251.66
|
261.66
|
5.34
|
5.91
|
4.39
|
E1E
|
480
|
|
|
including
|
257.56
|
257.86
|
0.16
|
145.89
|
95.00
|
|
|
|
GD-590-02
|
909
|
744.32
|
748.77
|
2.60
|
58.65
|
33.32
|
E1E
|
697
|
|
|
including
|
746
|
746.73
|
0.40
|
260.77
|
95.00
|
|
|
|
GD-620-02
|
930
|
783.25
|
790.84
|
4.14
|
1.02
|
1.02
|
E1E
|
720
|
|
GD-630-01
|
1053
|
823.00
|
824.70
|
0.98
|
12.84
|
12.84
|
X
|
755
|
|
|
including
|
823.50
|
823.80
|
0.17
|
63.87
|
63.87
|
|
|
|
GD-630-03A
|
984
|
858.00
|
865.00
|
3.46
|
0.83
|
0.83
|
E1E
|
819
|
|
DEEP DRILLING
PROGRAM
|
|
Hole
Number
|
Length
(metres)
|
From
(metres)
|
To
(metres)
|
True Width
(metres)
|
Uncut
Grade
(g/t
Au)
|
Cut Grade (g/t
Au)
|
Zone
|
Vertical depth of
Intersection (metres)
|
|
|
MH1-2
|
1473
|
1,320.70
|
1,323.30
|
1.67
|
5.05
|
5.05
|
C
|
1,160
|
|
|
|
1,437.66
|
1,448.87
|
7.27
|
1.22
|
1.22
|
E1E
|
1,260
|
|
MH1-5
|
1517
|
1,344.20
|
1,352.89
|
4.80
|
11.72
|
11.72
|
E1E
|
1,207
|
|
MH2A
|
1422
|
1,262.85
|
1,265.60
|
2.06
|
3.35
|
3.35
|
X
|
1,091
|
|
|
|
1,270.17
|
1,277.80
|
5.70
|
24.70
|
18.03
|
E1E
|
1,098
|
|
|
including
|
1,272.00
|
1,273.25
|
0.78
|
143.46
|
95.00
|
|
|
|
MH2A-1
|
1363
|
1,198.34
|
1,200.24
|
1.53
|
14.71
|
14.71
|
E1E
|
945
|
|
MH2A-2
|
1394
|
1,221.25
|
1,225.68
|
3.34
|
6.07
|
6.07
|
E1E
|
1,000
|
|
MH3-3
|
1504
|
1,358.74
|
1,366.26
|
3.71
|
2.64
|
2.64
|
E1E
|
1,241
|
|
MH3-4
|
1441
|
1,277.42
|
1,282.19
|
3.65
|
5.55
|
5.55
|
E1E
|
1,136
|
|
MH3-5
|
1500
|
1,331.00
|
1,342.55
|
7.07
|
6.03
|
6.03
|
E1E
|
1,223
|
|
KREMZAR DRILLING
PROGRAM (REGIONAL)
|
|
Hole
Number
|
Length
(metres)
|
From
(metres)
|
To
(metres)
|
Core Length
(metres)
|
Uncut
Grade
(g/t
Au)
|
Cut
Grade
(g/t
Au)
|
Zone
|
Vertical depth of
Intersection (metres)
|
|
|
KZ-16-01
|
817
|
453.50
|
459.90
|
6.40
|
0.49
|
0.49
|
MAIN
|
385
|
|
KZ-16-01
|
|
551.65
|
552.45
|
0.80
|
36.97
|
36.97
|
X
|
467
|
|
KZ-16-01
|
|
630.14
|
630.75
|
0.61
|
27.05
|
27.05
|
X
|
534
|
|
KZ-16-01
|
|
652.60
|
654.57
|
1.97
|
6.49
|
6.49
|
X
|
554
|
|
KZ-16-02
|
918
|
702.00
|
710.00
|
8.00
|
9.71
|
9.71
|
X
|
591
|
|
|
including
|
704.5
|
707.82
|
3.32
|
20.76
|
20.76
|
|
|
|
SOURCE Richmont Mines