Kilo Goldmines Ltd. (TSX VENTURE:KGL)(FRANKFURT:02K) ("Kilo" or the
"Company"), a gold exploration company with a focus on projects in
the prolific greenstone belt of eastern Democratic Republic of
Congo ("DRC"), today announced the results of its updated Canadian
National Instrument ("NI") 43-101 Mineral Resource estimate for its
71.25%-owned Adumbi Project.
Highlights:
-- Inferred mineral resource of 35.6 M tonnes containing 1.87 M ounces (oz)
of gold at an average grade of 1.63 g/t Au at a cut off grade of 0.5 g/t
Au;
-- Increase in average gold grade by 18%;
-- Increase in gold ounces within the higher grade categories;
-- Significant reduction in Mineral Resource tonnes;
-- Increase in gold ounces in the oxidized portion of the Mineral Resource
to 33%;
-- Mineralization remains open on strike and at depth; and
-- Further infill and step-out drilling is planned.
Commenting on today's independent Mineral Resource update,
Kilo's President and Chief Executive Officer, Alex van Hoeken,
said:
"Our latest updated Mineral Resource estimate reaffirms that the
Adumbi deposit has significant gold mineralization, with
significant potential to grow in size with further systematic
exploration.
The updated Mineral Resource estimate is based on a more robust
geological model, culminating in an increase in average grade and a
corresponding increase in gold ounces within higher grade
categories. The grade tonnage profile above a 1 g/t cut-off in
particular reflects this. The deposit remains open at depth and
along strike and is thus believed to have significant upside
potential. Considering that this year's exploration focus is on the
adjacent nearby prospects, the new Adumbi Mineral Resource estimate
will contribute to the overall objective of increasing and
improving the Mineral Resources within the Adumbi exploitation
permit.
Management continues to believe that the Adumbi Mineral Resource
as currently defined has significant upside potential and more
drilling, which will commence shortly on land immediately adjacent
to the Mineral Resource as currently defined, will test this
hypothesis."
Summary - NI 43-101 Inferred Mineral Resource:
The Mineral Resource estimate for the Adumbi deposit contained
within Exploitation License PE9691, at a cut-off grade of 0.5 g/t
Au, comprises 35.6 M tonnes in the Inferred category, containing
1.87 M ounces (oz) of gold at an average grade of 1.63 g/t Au.
The updated Mineral Resource estimate is summarized in the table
below. The full technical report prepared by The Mineral
Corporation will be filed on SEDAR within 45 days.
Adumbi Mineral Resource Estimate at a 0.5 g/t Au cut-off
----------------------------------------------------------------------------
Mineral Resource Grade Contained gold
tonnage (t) (g/t) (Moz)
----------------------------------------------------------------------------
Oxide 12 310 549 1.61 0.64
----------------------------------------------------------------------------
Transition 4 763 163 1.66 0.25
----------------------------------------------------------------------------
Sulphide 18 581 569 1.63 0.98
----------------------------------------------------------------------------
Total 35 655 280 1.63 1.87
----------------------------------------------------------------------------
Adumbi Mineral Resource Grade/Tonnage Relationship
----------------------------------------------------------------------------
Tonnage
Cumulative Grade above proportion Contained gold
tonnage above cut-off above cut-off above cut-off
Cut-off cut-off (t) (g/t) (%) (Moz)
----------------------------------------------------------------------------
0.50 35 655 280 1.63 100% 1.87
----------------------------------------------------------------------------
0.75 28 919 159 1.86 81% 1.73
----------------------------------------------------------------------------
1.00 24 604 479 2.04 69% 1.61
----------------------------------------------------------------------------
1.25 19 772 500 2.26 55% 1.44
----------------------------------------------------------------------------
1.50 15 507 918 2.50 43% 1.25
----------------------------------------------------------------------------
2.00 9 552 756 2.99 27% 0.92
----------------------------------------------------------------------------
2.50 6 193 607 3.41 17% 0.68
----------------------------------------------------------------------------
3.00 3 805 155 3.83 11% 0.47
----------------------------------------------------------------------------
Remodeling of the Mineral Resource was executed by The Mineral
Corporation, who also produced the original March 2011 Mineral
Resource statement. At that time, the Mineral Resource estimate at
a 0.5 g/t cut-off, was 46.3 Mt containing 2.03 M oz at an average
grade of 1.37 g/t.
In this 2012 Mineral Resource update, an improved structural
model has been developed, which has permitted three mineralized
zones, interpreted to be higher than 1.5 g/t in gold grade, to be
modeled. These zones are less continuous than the previously
modeled "BIF", but can nonetheless be correlated on strike and dip
at the resolution of the current drilling. As a consequence of this
process, a large amount of waste interburden has been removed,
thereby decreasing the total number of tonnes within the Mineral
Resource.
The 2012 Mineral Resource for Adumbi, which is classified as
Inferred mineral resources, is based on approximately 10 750 m of
sampling data, including data from 4 underground adits, 49 diamond
boreholes and 18 surface trenches. The data from the trenches was
used to inform the interpretation of geological zones, but was not
used for gold grade estimation purposes. A total of 1 623 m of
borehole data is interpreted to have intersected the three
mineralized zones.
Three zones of mineralization with a gold grade predominantly
above 1.5 g/t were delineated after the interpretation of a
structural model for the host rocks. The zones strike
northwest-southeast and generally dip vertically. Ordinary Kriging
within the zones and within the interburden was used to estimate
gold grades, into 25 m by 25 m by 5 m blocks. A density of 3.09
t/m3 within the mineralized zones and 3.04 t/m3 outside the zones
was utilized for the estimation of tonnage. These densities are
based on the results of one borehole which was analyzed at ALS
Chemex. The deepest point of the model below surface is
approximately 350 m and the maximum extrapolation below the lowest
mineralized zone intersection point is 50 m.
Sampling, QC and Analytical Procedures:
The diamond drill core was sawn in half and one half was
sampled, as approximately one metre long samples. The drill core
was assayed by ALS Chemex, certified to international standards,
for gold using a 50g charge and the FA-AA method.
Quality control of analytical results is monitored by the
Company with the insertion of commercial standards and blanks in
every batch of samples submitted for analysis. For additional
details the reader is referred to Kilo's previously announced
quality control and analytical procedures (see May 4, 2010 press
release).
The Mineral Corporation has reviewed the quality control results
from both Kilo's own quality control protocols, and those of the
laboratory ("ALS Chemex") and has not identified any material flaw
in the sampling or analytical procedures which would prevent its
estimate of Inferred Mineral Resources.
Qualified Person
Mr. David Young, of The Mineral Corporation, is the "Qualified
Person" who prepared the Mineral Resource estimate and has reviewed
and approved the scientific and technical information contained in
this press release. . The Mineral Resource estimate was prepared
using the Canadian Institute of Mining, Metallurgy and Petroleum
("CIM") definition Standards (2005) and CIM Best Practice
Guidelines for preparing Mineral Resources and Mineral Reserves.
Mr. Young is independent of Kilo as that term is defined in NI
43-101. The Mineral Corporation is an independent geological and
mining consulting firm that is based in South Africa.
About Kilo
Kilo Goldmines Ltd. is a Canadian gold exploration company
operating in the Democratic Republic of Congo (DRC). The Company
has over 7,000 square km of favourable Archaean Kibalian greenstone
in the Kilo-Moto area in north-eastern DRC. Kilo recently announced
an inferred resource on the Adumbi Deposit of the Somituri Project
of which the Company owns a 71.25% interest in the DRC entity that
holds the Somituri Project Exploitation Permits.
The Company is also working on a number of other prospective
areas which contain historical workings in the same region. It also
has a joint venture with Rio Tinto Ltd. on potential iron ore
licences in north-eastern DRC.
This news release may contain forward looking statements
concerning future operations of Kilo Goldmines Ltd. All forward
looking statements concerning the Company's future plans and
operations, including management's assessment of the Company's
project expectations or beliefs may be subject to certain
assumptions, risks and uncertainties beyond the Company's control.
Investors are cautioned that any such statements are not guarantees
of future performance and that actual performance and exploration
and financial results may differ materially from any estimates or
projections.
Neither TSX Venture Exchange nor its Regulation Services
Provider (as that term is defined in the policies of the TSX
Venture Exchange) accepts responsibility for the adequacy or
accuracy of this release.
Contacts: Kilo Goldmines Ltd. Alex van Hoeken President and CEO
+1-416-360-3415avh@kilogoldmines.com Kilo Goldmines Ltd. Suite
1200, 141 Adelaide Street West Toronto, Ontario M5H 3L5 Website:
www.kilogoldmines.com Facebook: www.kilogoldmines.com/facebook
Twitter: www.twitter.com/kilogoldmines