Item 1. Business
The Company
Tecogen
®
Inc. (“Tecogen,” the “Company,” “we,” “our,” or “us”) was incorporated in the State of Delaware on September 15, 2000. Our principal executive offices are located at 45 First Avenue, Waltham, Massachusetts 02451 and our telephone number is (781) 446-6400. The Company designs, manufactures, markets, and maintains high efficiency, ultra-clean cogeneration products including natural gas engine-driven combined heat and power, air conditioning systems, and water heaters for residential, commercial, recreational and industrial use. The Company is known for cost efficient, environmentally friendly and reliable products for distributed power generation that, through patented technology, nearly eliminate criteria pollutants and significantly reduce a customer’s carbon footprint.
The Company’s history dates to the early 1960s when it served as the Research and Development New Business Center of Thermo Electron Corporation, now Thermo Fisher Scientific Inc. For the next two decades, this group performed fundamental and applied research in many energy-related fields to develop new technologies. In 1982, the Research and Development group released its first major product, a 60-kilowatt (kW) cogenerator. In the late 1980s and early 1990s, air-conditioning and refrigeration products using the same gas engine-driven technology were introduced. In 1987, Tecogen was spun out as a separate entity by Thermo Electron and, in 1992, became a division of the newly formed Thermo Power Corporation. In 2000, Thermo Power Corporation was dissolved, and Tecogen was sold to a group of private investors including the Company's Co-CEO, John N. Hatsopoulos.
In 2009, Tecogen created a subsidiary, Ilios
®
Inc., a Delaware corporation (“Ilios”), to develop and distribute a line of high-efficiency heating products, starting with a water heater. We believe that these products are much more efficient than the conventional boilers traditionally used in commercial buildings and industrial processes (see “Our Products” below).
In December 2015, the Company entered into a joint venture agreement with a group of European strategic investors relating to the formation of Ultra Emissions Technologies Ltd. (“Ultra Emissions”), organized under the laws of the Island of Jersey, Channel Islands, a joint venture company. Ultra Emissions was organized to develop and commercialize Tecogen’s patented technology, Ultera
®
, for the automotive market. The technology is designed to reduce harmful emissions generated by engines using fossil fuels. Tecogen contributed an exclusive license for use of Ultera in the automotive space to the joint venture, and the strategic partners have committed to financing the initial research, development and testing of a viable product. See “Our Products - Ultera Low-Emissions Technology” below for a more in depth discussion of the Ultra emissions opportunity. Although Tecogen originally owned 50% of the joint venture, due to investment by outside investors, as of December 31, 2016, Tecogen’s ownership interest is 43%. See Note 13 to the Company’s Consolidated Financial Statements for the year ended December 31, 2016.
Recent Developments
In April 2016 pursuant to share exchange agreements, holders of the non-controlling interest in Ilios agreed to exchange every 7.86 of their restricted Ilios shares of common stock for 1 share of the Company's common stock. In addition, the Company granted each exchanging shareholder registration rights with respect to the Company's common stock such shareholder received in exchange for such shareholder's Ilios shares. Thereafter, the Company effected a statutory merger of Tecogen and Ilios. Ilios remains a brand name for our line of heat pump products.
In May 2016, Tecogen entered into a joint venture agreement, (the "JV Agreement") with Tedom a.s., a European combined heat and power product manufacturer incorporated in the Czech Republic ("Tedom") and Tedom’s subsidiary, Tedom USA, Inc., a Delaware corporation. Pursuant to the JV Agreement, the parties formed TTcogen LLC, a Delaware limited liability company (“TTcogen”), through which the joint venture is operated. TTcogen offers Tedom's line of Combined Heat and Power ("CHP") products to the United States via Tecogen's nationwide sales and service network consisting of 27 CHP modules ranging in size from 35 kW up to 4 MW and fully capable of running on a variety of fuel feedstocks (including natural gas, propane, and biofuel).
Proposed Acquisition of American DG Energy, Inc.
On November 1, 2016, Tecogen and Tecogen.ADGE Acquisition Corp., a Delaware corporation and wholly-owned subsidiary of Tecogen (“Merger Sub”) formed for the purpose of effecting the merger, entered into an Agreement and Plan of Merger (the “Merger Agreement”) with American DG Energy, Inc., a Delaware corporation (“ADGE”). Pursuant to the Merger Agreement, the Merger Sub will be merged with and into ADGE (the “Merger”), with ADGE continuing as the surviving company in the Merger. Following the Merger, ADGE will become a wholly-owned subsidiary of Tecogen. The Merger Agreement sets forth the terms and conditions of the proposed acquisition of ADGE.
Subject to the terms and conditions set forth in the Merger Agreement, at the effective time of the Merger, each share of ADGE common stock, $.001 par value per share, issued and outstanding immediately prior to the effective time of the Merger will be converted into the right to receive 0.092 shares of Tecogen common stock, $.001 par value per share (the “Exchange Ratio”). The Exchange Ratio may be subject to adjustment in the event of any stock split, reverse stock split, stock dividend, recapitalization, reclassification, combination, exchange of shares or other similar event with respect to the number of ADGE’s
or Tecogen’s shares outstanding after the date of the Merger Agreement and prior to the effective time of the Merger. Options to acquire ADGE shares of common stock and restricted stock awards with respect to ADGE shares of common stock granted before the effective time of the Merger will remain in effect until they expire or are terminated and shall be exercisable for or relate to a number of shares of common stock of Tecogen equal to the Exchange Ratio, as adjusted.
The Merger Agreement contains customary representations and warranties of Tecogen and ADGE relating to the respective businesses and public filings of Tecogen and ADGE. In addition, the Merger Agreement provides for customary pre-closing covenants of Tecogen and ADGE, including covenants relating to conducting the respective businesses of Tecogen and ADGE in all material respects in the ordinary course of business in accordance with past practice and to use commercially reasonable efforts to maintain in all material respects Tecogen’s and ADGE’s assets and properties in their current condition.
Prior to the receipt of the approval of the Merger Agreement by the stockholders of both Tecogen and ADGE, the Merger Agreement may be terminated and the Merger may be abandoned by either Tecogen or ADGE pursuant to a resolution of its respective board of directors to withdraw or fail to make when required under the Merger Agreement, propose publicly to withdraw or fail to make or include in the joint proxy statement/prospectus for the Merger, a recommendation that its stockholders vote in favor of the Merger or, in the case of ADGE, may terminate the Merger Agreement in the event its board approves, recommends or declares advisable, or proposes publicly to approve, recommend or declare advisable a competing proposal or offer by a third party to purchase 20% or more of the assets or outstanding capital stock, other equity securities, or voting power, of ADGE, or any merger, business combination, consolidation, share exchange, recapitalization or similar transaction as a result of which the holders of its common stock immediately prior to the transaction do not own at least 80% of the outstanding voting power of the surviving or resulting entity in such transaction after the consummation of the transaction (“competing proposal”). The foregoing is subject to compliance with written notice of termination and the furnishing of the reasons for such termination. In the event of a termination, there shall be no liability on the part of the terminating party to the other party or parties except in the case of fraud, gross negligence, or willful misconduct.
The Merger Agreement does not provide for the payment by ADGE or Tecogen of a breakup or termination fee in the event of such a termination.
Also, the Merger Agreement contains a “go shop” provision, pursuant to which, following the date of the Merger Agreement and prior to the receipt of the approval of the Merger by ADGE’s and Tecogen’s stockholders, ADGE and its officers, directors, employees, financial and other advisors may initiate or solicit a competing proposal.
Further, the Merger Agreement provides that at any time before the closing of the Merger, either ADGE’s or Tecogen’s board of directors may terminate the Merger Agreement if such board (or a committee of such board) has determined in good faith, after consultant with its financial advisors and legal counsel (“advisors”), that there is a reasonable probability the failure to take such action would cause the board of ADGE or Tecogen, as the case may be, the violate its fiduciary duties to its stockholders under applicable law. The Merger Agreement requires the terminating company to provide ten days’ prior written notice; the terminating company (or its representative) is required to negotiate in good faith with the other party during the five business day period after giving such notice to the extent such other party wishes to negotiate and, in the case of a termination by ADGE’s board, and to the extent Tecogen wishes to negotiate, to enable Tecogen to propose in writing a binding offer to effect revisions to the terms of the Merger Agreement that would obviate the need for a termination by ADGE, and, in the case of a termination by the board of Tecogen, to enable both companies to agree to revisions to the terms of the Merger Agreement that would obviate the need for a termination by Tecogen. At the end of the notice period, the terminating company’s board (or committee), is required to have considered in good faith any such binding offer, and to have determined in good faith, after consultation with its advisors, that there is a reasonable probability the failure to effect the termination would cause such board to violate its fiduciary duties to its stockholders under applicable law. In the event of such a termination by either there shall be no liability on the part of the terminating party to the other party or parties except in the case of fraud, gross negligence, or willful misconduct.
Consummation of the Merger is subject to a number of customary conditions including, among others, conditions relating to the approval of the Merger by the requisite vote of the stockholders of Tecogen and ADGE, the receipt of all required regulatory approvals, and the effectiveness of a registration statement on Form S-4 of Tecogen related to the Merger.
In connection with the proposed Merger, on December 21, 2016, Tecogen filed a registration statement on Form S-4 (the "Registation Statement") with the SEC and, on January 27, 2017, filed an Amendment No. 1 to the Registration Statement. The Registration Statement relates to the registration of the shares of common stock of Tecogen to be issued in the Merger and includes a joint proxy statement/prospectus pursuant to which Tecogen and ADGE will solicit the votes of their respective stockholders for the approval of the Merger at separate special meetings of such stockholders. Tecogen and ADGE expect to make the joint proxy statement/prospectus available to their respective stockholders and to file other documents regarding the proposed Merger with the SEC, including one or more further amendments to the Registration Statement. This Annual Report is not intended to be, and is not, a substitute for such filings or for any other document that Tecogen or ADGE may file with the SEC in connection with the proposed Merger. Stockholders of Tecogen are urged to read all relevant documents filed with the SEC, including the effective registration statement and the joint proxy statement/prospectus contained therein carefully when they become available, because
they will contain important information about Tecogen, ADGE, and the proposed Merger
.
Investors and security holders will be able to obtain copies of the definitive joint proxy statement/prospectus as well as other filings containing information about Tecogen, ADGE, and the Merger once they become available, without charge, at the SEC's website at
http://www.sec.gov
. Copies of documents filed with the SEC by Tecogen will be made available free of charge on Tecogen’s investor relations website at
http://ir.tecogen.com/all-sec-filings
. The information on Tecogen’s web site is not incorporated by reference into this annual report on Form 10-K.
Litigation Related to the Proposed Merger
Massachusetts Superior Court Action
On or about February 6, 2017, ADGE, John Hatsopoulos, George N. Hatsopoulos, Charles T. Maxwell, Deanna M. Petersen, Christine Klaskin, John Rowe, Joan Giacinti, Elias Samaras, Tecogen, and Merger Sub were served with a verified complaint by William C. May, individually and on behalf of the other shareholders of ADGE as a class. The complaint alleges the proposed Merger is subject to certain conflicts of interest; that the registration statement on Form S-4 contained material omissions; that Tecogen aided and abetted ADGE’s board’s breaches of its fiduciary duties; and other claims. The plaintiff is seeking preliminary and permanent injunctions related to the Merger, rescissory damages, compensatory damages, accounting, and other relief.
For the description of a lawsuit filed in the United States District Court, but as to which no service of process has been effected, see "Business - Litigation."
Business Overview
Tecogen designs, manufactures, markets, and maintains high efficiency, ultra-clean cogeneration products including natural gas engine-driven combined heat and power, air conditioning systems, and water heaters for residential, commercial, recreational and industrial use. The company is known for cost efficient, environmentally friendly and reliable products for distributed power generation that, through patented technology, nearly eliminate criteria pollutants and significantly reduce a customer’s carbon footprint.
Tecogen’s natural gas powered cogeneration systems (also known as combined heat and power or “CHP”) are efficient because they drive electric generators or compressors, which reduce the amount of electricity purchased from the utility while recovering the engine’s waste heat for water heating, space heating, and/or air conditioning at the customer’s building.
Tecogen manufactures three types of CHP products:
•
Cogeneration units that supply electricity and hot water including the InVerde
®
100, InVerde e+
®
, CM-75 and CM-60;
•
Chillers that provide air-conditioning and hot water marketed under the TECOCHILL
®
brand name; and
•
Ilios
®
branded high-efficiency water heaters.
All of these are standardized, modular, CHP products that reduce energy costs, carbon emissions, and dependence on the electric grid. Tecogen’s products allow customers to produce power on-site in parallel with the electric grid, or stand alone when no utility grid is available via inverter-based black-start capability. Because our CHP systems also produce clean, usable heat energy, they provide economic advantages to customers who can benefit from the use of hot water, chilled water, air conditioning and heating.
Traditional customers for our cogeneration and chiller systems include hospitals and nursing homes, schools and universities, health clubs and spas, hotels and motels, office and retail buildings, food and beverage processors, multi-unit residential buildings, laundries, ice rinks, swimming pools, factories, municipal buildings, and military installations; however, the economic feasibility of using our systems is not limited to these customer types. Market drivers include the price of natural gas, local electricity rates, environmental regulations, and governmental energy policies, as well as customers’ desire to become more environmentally responsible.
Through our factory service centers in California, Connecticut, Massachusetts, Michigan, New Jersey, and New York our specialized technical staff maintain our products via long-term service contracts. The Company has shipped over 2,500 units, some of which have been operating for almost 25 years.
Our CHP technology uses low-cost, mass-produced engines, which we modify to run on natural gas. In the case of our mainstay cogeneration and chiller products, the engines have proven to be cost-effective and reliable. In 2009, in response to the changing regulatory requirements for stationary engines, our research team developed an economically feasible process for removing air pollutants from the engine exhaust. This technology's U.S. and foreign patents were granted beginning in October 2013 with other domestic and foreign patents granted or applications pending. Branded Ultera
®
, the ultra clean emissions technology, repositions our engine driven products in the marketplace, making them comparable environmentally with other technologies such as fuel cells, but at a much lower cost and greater efficiency. Because of this breakthrough design for emission control, our natural gas-fueled CHP modules fitted with the patented Ultera control technology are certified by the California Air Resources Board ("CARB") as meeting its stringent 2007 emissions requirements, the same emissions standard used to certify
fuel cells, and the same emissions levels as a state-of-the-art central power plant. We now offer our Ultera emissions control technology as an option on all our products or as a stand-alone application for the retrofitting of other rich-burn spark-ignited reciprocating internal combustion engines.
Tecogen products are designed as compact modular units that are intended to be installed in multiples when utilized in larger CHP plants. The majority of our CHP modules are installed in multi-unit sites with applications ranging up to 12 units. This approach has significant advantages over utilizing single larger units, allowing building placement in constrained urban settings and redundancy to mitigate service outages. Redundancy is particularly relevant in regions where the electric utility has formulated tariff structures that include high “peak demand” charges. Such tariffs are common in many areas of the country, and are applied by such utilities as Southern California Edison, Pacific Gas and Electric, Consolidated Edison of New York, and National Grid of Massachusetts. Because these tariffs are assessed based on customers’ peak monthly demand charge over a very short interval, typically only 15 minutes, a brief service outage for a system comprised of a single unit can create a high demand charge, and therefore be highly detrimental to the monthly savings of the system. For multiple unit sites, the likelihood of a full system outage that would result in a high demand charge is dramatically reduced, so consequently, these customers have a greater probability of capturing peak demand savings.
Our CHP products are sold directly to customers by our in-house marketing team, and by established sales agents and representatives, including ADGE.
O
ur Products
We manufacture natural gas engine-driven cogeneration systems, heat pumps, and chillers, all of which are CHP products that deliver more than one form of energy. Our cogeneration products are all standard, modular units that come pre-packaged from the Company’s factory for ease of installation at a customer’s site. The package incorporates the engine, generator, heat-recovery equipment, system controls, electrical switchgear, emission controls, and a data controller for remote monitoring and data transmission; minimizing the cost and complexity of installing the equipment at a site. This packaged, modular system simplifies CHP technology for small to mid-sized customers who typically are less experienced with the implementation and benefits of a CHP system.
All of our cogeneration systems and most of our chillers use the same engine, the TecoDrive 7400 model. This is an engine modified by us to use natural gas fuel. The small 25-ton chiller uses a similar engine, the 3000 model. We worked closely with the engine manufacturers and the gas industry (including the Gas Research Institute) in the 1980s and 1990s to modify the engine and validate its durability. For the Ilios water heater, we introduced a technologically advanced Ford engine that is enhanced for industrial applications.
Our commercial product line includes:
•
the InVerde
®
, InVerde e+
®
, TECOGEN
®
and TTcogen cogeneration units;
•
TECOCHILL
®
chillers;
•
Ilios
®
high-efficiency water heaters; and
•
Ultera
®
emissions control technology.
InVerde Cogeneration Units
Our premier cogeneration product is the InVerde, a 100-kW CHP system that not only provides electricity and hot water, but also satisfies the growing customer demand for operation during a utility outage, commonly referred to as “black-start” capability. Our exclusively licensed microgrid technology (see “Intellectual Property” below) enables our InVerde CHP products to provide backup power in the event of power outages that may be experienced by local, regional, or national grids.
The InVerde incorporates an inverter, which converts direct current, or DC, electricity to alternating current, or AC. With an inverter, the engine and generator can run at variable speeds, which maximizes efficiency at varying loads. The inverter then converts the generator’s variable output to the constant-frequency power required by customers in 50 or 60 Hertz.
This inverter technology was developed originally for solar and wind power generation. The Company believes that the InVerde is the first commercial engine-based CHP system to use an inverter. Electric utilities accept inverter technology as “safe” by virtue of its certification to the Underwriters Laboratory interconnection standard 1741. InVerde earned this certification. This qualifies our product for a much simpler permitting process nationwide and is mandatory in some areas such as New York City and California, a feature we consider to be a competitive advantage. The inverter also improves the CHP system’s efficiency at partial load, when less heat and power are needed by the customer.
The InVerde`s black-start feature addresses a crucial demand from commercial and institutional customers who are increasingly concerned about utility grid blackouts and brownouts, natural disasters, security threats, and antiquated utility infrastructure. Multiple InVerde units can operate collectively as a stand-alone microgrid, which is a group of interconnected loads served by one or more power sources. The InVerde is equipped with software that allows a cluster of units to seamlessly share the microgrid load without complex controls; a proprietary cost advantage for multiple modules at a single location.
The InVerde CHP system was developed in 2007 and began shipping in 2008. Our largest InVerde installation utilizes 12 units, which supply 1.2 MW of on-site power and about 8.5 million Btu/hr of heat (700,000 Btu/hr per unit).
In January 2016, the Company launched its newest edition to the InVerde line, the InVerde e+. The e+ builds on the success of the first generation InVerde and reinforces our goal to be at the forefront of the industry, providing our customers with the most advanced clean energy technologies available in the marketplace. Among the most differentiating features when compared to competitive CHP technology are that the InVerde e+ offers: best in class electrical efficiency; a DC input option for solar or battery array integration; rapid 10 second black-start; and requires just 4 inches of water column gas pressure which eliminated the need for additional costly pressure boosting equipment, unlike its competitors.
TECOGEN Cogeneration Units
The TECOGEN cogeneration system is the original model introduced in the 1980s; available in sizes of 60 kW and 75 kW and capable of producing up to 500,000 Btu/hr of hot water. This technology is based on a conventional single-speed generator. It is meant only for grid-connected operation and is not universally accepted by utilities for interconnection, in contrast to the InVerde. Although this cogeneration product has the longest legacy and largest installed population, much of its production volume has been supplanted by the InVerde and its broader array of product features.
TECOCHILL Chillers
Our TECOCHILL natural gas engine-driven chillers are available in capacities ranging from 25 to 400 tons, with the smaller units air-cooled and the larger ones water-cooled. Using technology first developed in 1987, the engine drives a compressor that makes chilled water, while the engine’s free waste heat can be recovered to satisfy the building’s needs for heat or hot water. This process is sometimes referred to as “mechanical” cogeneration, as it generates no electrical power, and the equipment does not have to be connected to the utility grid.
A gas-fueled chiller provides enough air conditioning to avoid most of the utility’s seasonal peak charges for electric usage and capacity. In summer when electric rates are at their highest, natural gas is “off-peak” and quite affordable, allowing TECOCHILL customers to avoid typically higher summer-time “peak-usage” electric rates. Gas-fueled chillers also free up the building’s existing electrical capacity to use for other loads and can operate on minimal electric load in case of electric grid blackout; a key feature for customers concerned about load demand on backup power generators.
Ilios High-Efficiency Water Heaters
Tecogen has developed several heat pumps under the Ilios brand name including a High Efficiency ("HE") Air-Source Water Heater, HE Water-Sourced Water Heater, and HE Air-Sourced “Split System” Water Heater. Our water heater products operate like an electric heat pump but use a natural gas engine instead of an electric motor to power the system. The Ilios high-efficiency water heater uses a heat pump, which captures warmth from outdoor air even if it is moderately cool outside. Heat pumps work somewhat like a refrigerator, but in reverse. Refrigerators extract heat from inside the refrigerator and move it outside the refrigerator while heat pumps extract heat from outside and move it indoors.
The gas engine’s waste heat is recovered and used in the process, unlike its electric counterpart, which runs on power that has already lost its waste heat. This means that the heat being captured from outdoors is supplemented by the engine’s waste heat, which increases the efficiency of the process. The net effect is that an Ilios heat pump’s efficiency far surpasses that of conventional boilers for water heating; gas engine heat pumps can deliver efficiencies in excess of 200%.
Similarly, if used for space heating, the engine-powered heat pump is more efficient than an electric heat pump, again because heat is recovered and used for other building processes. The product’s higher efficiency translates directly to lower fuel consumption and, for heavy use customers, significantly lowers operating costs when compared with conventional equipment.
In 2013, a water-sourced model of the heat pump was added to our product line. This heat pump captures heat from a water source such as a geothermal well or from a pre-existing chilled water loop in the facility; the latter configuration provides simultaneous heating and cooling benefits, doubling the effect.
Following on the success of the water-sourced model, in early 2015 a 'split system' Ilios model was introduced. The new split system offers increased flexibility because its air-source evaporator package can be installed remotely. The engine driven heat pump, which is contained in a small acoustic enclosure, can be located with a building's mechanical space while the quiet air-source evaporator package can be installed on a roof, or in any outdoor space. The outdoor evaporator component is connected to the indoor heat pump via refrigerant lines, therefore eliminating all freeze protection issues in colder climates. All of the water being heated remains inside the conditioned space, eliminating the need for a costly isolation heat exchanger and additional pumps, which simplifies installation and increases efficiency by being able to operate at a lower delivery temperature.
The heat pump water heater serves as a boiler, producing hot water for drinking and washing, for space heating, swimming pools, or other building loads. Energy cost savings to the customer depend on the climate. Heat pumps in general, whether gas or electric, perform best in moderate weather conditions although the performance of the Ilios water-source heat pump is not impacted by weather or climate conditions. In a typical building, the Ilios heat pump would be added on to an existing heating or water heating system, and would operate as many hours as possible. The conventional boiler would be left in place, but would serve mainly as a backup when the heat pump’s engine is down for maintenance or when the heat pump cannot meet the building’s peak heating load. In areas where low electric rates make CHP less economical, the Ilios heat pump could be a financially attractive alternative because its economics depend only on natural gas rates. In some areas with high electric rates, the Ilios option could have advantages over CHP; for example where it is hard to connect to the utility grid or where the building’s need for electricity is too low for CHP to be economically sound.
Ultera Low-Emissions Technology
All of our CHP products are available with the patented Ultera low-emissions technology as an equipment option. This breakthrough technology was developed in 2009 and 2010 as part of a research effort partially funded by the California Energy Commission and Southern California Gas Company. The objective was to bring our natural-gas engines into compliance with California’s stringent air quality standards.
The chart below shows that, as of December 31, 2016, our Ultera CHP and fuel cell technologies are the only technologies that we know of which comply with California's air quality standards for CO and NOx, represented in the chart by the colored horizontal lines, shown as the world's strictest air quality standards on the lower right of the chart.
(5) (2) (4) (4) (3) (1)
(1) California has the strictest air quality standards for engines in the world
(2) Conventional Energy Source is U.S. powerplant and gas boiler. Average U.S. powerplant NOx emission rate of 0.9461 lb/MWh from (USEPA eGrid 2012),
CO data not available. Gas boiler efficiency of 78% (www.eia.gov) with emissions of 20 ppm NOx @ 3% O
2
(California Regulation SCAQMD Rule 1146.2
and <50 ppmv CO @ 3% O
2
(California Regulation SCAQMD BACT).
(3) Tecogen emissions based upon actual third party source test data.
(4) Microturbine and Fuel Cell emissions from EPA CHP Partnership - Catalog of CHP Technologies- March 2015.
(5) Stationary Engine BACT as defined by SCAQMD.
Through development of a two stage catalyst emission treatment system, the Company was able to meet or exceed the strict air quality regulations with a solution that is cost-effective, robust, and reliable. Inclusion of the patent-protected Ultera low-emissions technology as an option keeps our CHP systems compliant with air quality regulations. The first commercial CHP units equipped with Ultera low-emissions technology shipped to a California utility in 2011. We conducted three validation programs for this technology:
|
|
1.
|
Third-party laboratory verification.
The AVL California Technology Center, a long-standing research and technology partner with the international automotive industry, confirmed our results in their state-of-the-art dynamometer test cell, which was outfitted with sophisticated emissions measurement equipment.
|
|
|
2.
|
Verifying longevity and reliability in the field.
By equipping one of our 75 kW units, already operating at a customer location in Southern California with the Ultera low-emissions technology and a device to continuously monitor emissions we verified longevity and reliability. The Ultera low-emissions system operated successfully for more than 25,000 hours, approximately 3.5 years, and consistently complied with California’s stringent emission standards over the entire field testing period.
|
|
|
3.
|
Additional independent tests.
During the field test, two companies licensed in California to test emissions each verified our results at different times. The results from one of these tests, obtained in August 2011, enabled us to qualify for New Jersey’s fast-track permitting. Virtually every state nationwide requires some kind of permit related to local air quality, but New Jersey allows an exemption for systems such as ours that demonstrate superior emissions performance. This certification was granted in November 2011, and since then we have sold Ultera low-emissions systems to customers in this territory.
|
In 2012, a 75 kW CHP unit equipped with the Ultera system became our first unit to obtain a conditional air permit (i.e., pending a third party source test to verify compliance) in Southern California since the strict regulations went into effect in 2009. A state-certified source test, administered in January 2013, verified that our emissions levels were well below the new permitting requirements, and the final permit version was approved in August 2013.
Standby Generators
After successfully developing the Ultera technology for our own equipment, the Tecogen research & development team began exploring other possible emissions control applications in an effort to expand the market for the ultra-clean emissions system. Retrofit kits were developed in 2014 for other stationary engines and in 2015 the Ultera Retrofit Kit was applied successfully to natural gas stand-by generators from other manufacturers, including Generac and Caterpillar.
Historically, standby generators have not been subjected to the strict air quality emissions standards of traditional power generation. However, generators which run for more than 200 hours per year or run for non-emergency purposes (other than routine scheduled maintenance) in some territories are subject to compliance with the same stringent regulations applied to a typical electric utility. As demand response programs become more economically attractive and air quality regulations continue to become more stringent, there could be strong demand for retrofitting of standby generators with our Ultera emissions control technology, thus providing a cost-effective solution to keeping the installed base of standby generators operational and in compliance.
Biogas
The Ultera emissions control technology developed by our engineering team applies specifically to rich-burn, spark-ignited, internal combustion engines. While it was originally intended for natural gas powered engines, there is reason to believe the technology may be adapted for other fuel types as long as the engine meets the rich-burn criteria.
In 2015 the Ultera system was applied to a biogas powered engine operating at the Eastern Municipal Water District’s (EMWD) Moreno Valley Region Water Reclamation Facility in Perris, California. The demonstration project was a result of an ongoing collaboration between Tecogen, the EMWD and various other partners. This project successfully applied an Ultera retrofit kit to a 50 liter Caterpillar engine fueled by biogas extracted from an anaerobic digester.
Biogas is a significant byproduct of wastewater treatment plants. Considered to be a renewable source of fuel, it is becoming an increasingly important resource for power generation. According to the American Biogas Council, nationwide there are over 1,100 engines fueled by wastewater-derived biogas, over 600 fueled by landfill-generated biogas, and over 100 running on biogas from agricultural waste. This represents a significant potential market for Ultera retrofit kit application as these biogas engines become subject to the same air quality standards as traditional power generation sources.
Gasoline Vehicles
In October 2015, following revelations of wide-scale problems with vehicle emissions compliance and testing, Tecogen formed an Emissions Advisory Committee to examine the potential application of Ultera to the automotive gasoline market. According to the U.S. EPA, 50 percent of nitrogen oxides (NOx) and 60 percent of all carbon monoxide (CO) emissions in the United States comes from vehicle exhaust. These are precisely the two pollutants Tecogen's Ultera emission control system is designed to target. After a thorough investigative process on the part of the Emissions Advisory Committee and various industry expert consultants, the group recommended Tecogen pursue a funded initiative to develop the technology for gasoline vehicles.
In December 2015, the Company and a group of strategic investors formed a joint venture company Ultra Emissions to advance Tecogen’s near-zero emissions technology for adaptation to transportation applications powered by spark-ignited rich-burn engines in the automobile and truck categories. Tecogen has granted Ultra Emissions an exclusive license for the development of its patented, emissions-related, intellectual property for the vehicle market.
Initially Ultra Emissions’ focus was on preliminary research, testing, and verification that the Ultera technology can in fact be applied to gasoline engines while maintaining similar near-zero emission results as have been demonstrated in other use cases. Having completed multiple phases of testing at AVL's California Technology Center, the Ultra Emissions team has verified the Ultera technology for gasoline automotive use and is moving forward with their development work.
If successfully developed, the market for automotive emissions control could be a source of future growth for the Company; although that potential could take several years to be realized and there is no guarantee we will be successful.
Propane Fork Trucks
In October 2016, the Company was awarded a Propane Education & Research Council (PERC) research grant funding for the Company's proposal to develop the Ultera ultra-clean emissions control technology for the propane powered fork truck market.
Electric fork trucks have been making significant in-roads in the fork truck industry, in part, because of their green image and indoor air quality benefit. The primary benefit of the Ultera-equipped ultra-clean propane fork truck will be fuel cell like emissions and a propane-green brand that offers a robust indoor air quality advantage without compromising vehicle performance. The project will assess the adaption of Tecogen’s near-zero emissions technology for the fork truck category and demonstrate the technical performance on popular propane fork truck models. Select industry-leading fork truck manufacturers are also participating in the research initiative.
Management believes that approximately 70,000 propane powered fork trucks are sold annually in the United States. Successful completion of this project could open a new emissions control market to Tecogen.
Other Ultera Applications
According to a 2013 Massachusetts Institute of Technology study, the U.S. experiences 200,000 early deaths each year due to emissions from heavy industry, transportation, and commercial and residential heating. As climate change and air quality continue to develop as areas of focus by government regulators, emissions restrictions are expected to become increasingly stringent around the world. These tightening regulations could open up new markets and applications for the Ultera near-zero emissions control technology. Some of these opportunities may include:
|
|
•
|
Commercial and industrial natural gas fueled engines from other manufacturers
|
|
|
•
|
Natural gas and biogas powered vehicle fleets - such as municipal bus fleets
|
TTcogen LLC
In May 2016, the Company and Tedom entered into a joint venture, of which a
50%
interest is held by each of the Company and Tedom. As part of the joint venture, the parties agreed to create a Delaware limited liability company, TTcogen LLC, to carry out the business of the venture. Tedom granted TTcogen the sole and exclusive right to market, sell, offer for sale, and distribute certain products as agreed to by the parties throughout the United States. The product offerings of the joint venture expand the current Tecogen product offerings from small-scale MicroCHP of 35 kW up to large 4,000 kW (4 MW) custom plants. Tecogen agreed to refer all appropriate sale leads to TTcogen regarding the products agreed to by the parties and Tecogen shall have the first right to install, repair and maintain the products sold by TTcogen.
Product Service
We provide long-term maintenance contracts, parts sales, and turnkey installation through a network of nine well-established field service centers in California, the Midwest, and the Northeast. These centers are staffed by full-time Tecogen technicians, working from local leased facilities. The facilities provide offices and warehouse space for inventory. We encourage our customers to provide internet or phone connections to our units so that we may maintain remote communications with the installed equipment. For connected installations, the machines are contacted daily, download their status, and provide regular operational reports (daily, monthly, and quarterly) to our service managers. This communication link is used to support the diagnosis
effort of our service staff and to send messages to preprogrammed phones if a unit has experienced an unscheduled shutdown. In many cases, communications received by service technicians from connected devices allow for proactive maintenance; minimizing equipment downtime and improving operating efficiency for the customer.
The work of our service managers, supervisors, and technicians focuses on our products. Because we manufacture our own equipment, our service technicians bring hands-on experience and competence to their jobs. They are trained at our corporate headquarters and primary manufacturing facility in Waltham, Massachusetts.
Most of our service revenue is in the form of annual service contracts, which are typically of an all-inclusive “bumper-to-bumper” type, with billing amounts proportional to the equipment's achieved operating hours for the period. Customers are thus invoiced in level, predictable amounts without unforeseen add-ons for such items as unscheduled repairs or engine replacements. We strive to maintain these contracts for many years, assuring the integrity and performance of our equipment is maintained.
Our products have a long history of reliable operation. Since 1995, we have had a remote monitoring system in place that connects to hundreds of units daily and reports their “availability,” which is the amount of time a unit is running or is ready to run in hours. More than 80% of them operate above 90% availability, with the average being 93.8%. Our factory service agreements have directly impacted these positive results and represent an important, long-term, annuity-like stream of revenue for the Company.
In early 2016, we announced the selection of General Electric Company’s (NYSE: GE) Equipment Insight solution for new equipment sold beginning in 2016 and for select upgrades to the existing installed equipment fleet. With GE’s technology, Tecogen is able to collect, analyze, and manage valuable asset data continuously and in real-time, providing the service team with improved insight into the functionality of our installed CHP fleet. GE Equipment Insight allows Tecogen to provide a more seamless and proactive maintenance approach while also ensuring peak performance of installed equipment and improving the equipment payback period for our customers. This industrial internet solution enables the service department to perform remote monitoring and diagnostics and to view system results in real time via a computer, smart phone or tablet. The solution enables users to better utilize monitoring data, ensuring customers are capturing maximum possible savings and efficiencies from their installation. Through constant monitoring and analysis of equipment data, Tecogen expects to enhance the performance of installed equipment by ensuring machinery consistently operates at peak performance and is available to deliver maximum potential value for customers.
Contributions to Revenue
The following table summarizes net revenue by product line and services for the years ended
December 31, 2016
and
2015
:
|
|
|
|
|
|
|
|
|
|
2016
|
|
2015
|
Products:
|
|
|
|
|
|
Cogeneration
|
$
|
7,794,575
|
|
|
$
|
7,882,838
|
|
Chiller & Heat Pump
|
2,927,710
|
|
|
2,172,399
|
|
Total product revenue
|
10,722,285
|
|
|
10,055,237
|
|
Service & Parts
|
8,541,047
|
|
|
7,832,181
|
|
Installation Services
|
5,227,054
|
|
|
3,555,239
|
|
Total service revenue
|
13,768,101
|
|
|
11,387,420
|
|
Total revenue
|
$
|
24,490,386
|
|
|
$
|
21,442,657
|
|
All of the Company’s long lived assets reside in the United States. Currently, some revenue is generated outside the United States, including from sales in the United Kingdom, Mexico, Ireland, and others.
Sales & Distribution
Our products are sold directly to end-users by our sales team and by established sales agents and representatives. Various agreements are in place with distributors and outside sales representatives, who are compensated by commissions for certain territories and product lines. Sales through our in-house team or sales that are not covered by a representative’s territory carry no or nominal commissions. For the fiscal years ended 2016 and 2015, no distribution partner or customer relationship accounted for more than 10% of total combined company revenue.
Our product sales cycle exhibits typical seasonality for the HVAC industry with sales of chillers generally stronger in the warmer months while heat pump sales are stronger in the cooler months.
Total product and installation backlog as of December 31, 2016 was $11.1 million compared to year end 2015 backlog of $11.6 million. Please see "Management’s Discussion and Analysis of Financial Condition and Results of Operations" and related Risk Factors below for additional information about the Company’s backlog.
Markets and Customers
Worldwide, stationary power generation applications vary from huge central stationary generating facilities (traditional electric utility providers) to back-up generators as small as 2 kW. Historically, power generation in most developed countries such as the United States has been part of a regulated central utility system utilizing high-temperature steam turbines powered by fossil-fuels. This turbine technology, though steadily refined over the years, reached a maximum efficiency (where efficiency means electrical energy output per unit of fuel energy input) of approximately 40%.
A number of developments related primarily to the deregulation of the utility industry as well as significant technological advances have now broadened the range of power supply choices available to all types of customers. CHP, which harnesses waste energy from power generation processes and puts it to work for other uses on-site, can boost the energy conversion efficiency to nearly 90%, a better than two-fold improvement over the average efficiency of a fossil fuel plant. This distributed generation, or power generated on-site at the point of consumption rather than power generated centrally, eliminates the cost, complexity, and inefficiency associated with electric transmission and distribution. The implications of the CHP distributed generation approach are significant. If CHP were applied on a large scale, global fuel usage might be dramatically curtailed and the utility grid made far more resilient.
Our CHP products address the inherent efficiency limitation of central power plants by siting generation close to the loads being served. This allows customers with energy-intensive buildings or processes to reduce energy costs and operate with a lower carbon footprint. Furthermore, with technology we have introduced, like the Ultera low-emissions technology, our products can now contribute to better air quality at the local level while complying with the strictest air quality regulations in the United States.
Cogeneration and chiller products can often reduce the customer’s operating costs (for the portion of the facility loads to which they are applied) by approximately 30% to 60% based on Company estimates, which provides an excellent rate of return on the equipment’s capital cost in many areas of the country with high electricity rates. Our chillers are especially suited to regions where utilities impose extra charges during times of peak usage, commonly called “demand” charges. In these cases, the gas-fueled chiller reduces the use of electricity during the summer, the most costly time of year.
On-site CHP not only eliminates the loss of electric power during transmission, but also offsets the capital expense of upgrading or expanding the utility infrastructure. The national electric grids of many developed countries are already challenged to keep up with existing power demand. In addition, the transmission and distribution network is operating at capacity in a majority of urban areas. Decentralizing power generation by installing equipment at customer sites not only relieves the capacity burden on existing power plants, but also lessons the burden on transmission and distribution lines. This ultimately improves the grid’s reliability and reduces the need for costly upgrades.
Increasingly favorable economic conditions could improve our business prospects domestically and abroad. Specifically, we believe that natural gas prices might increase from their current depressed values, but only modestly, while electric rates would continue to rise over the long-term as utilities pay for grid expansion, better emission controls, efficiency improvements, and the integration of renewable power sources.
The largest numbers of potential new customers in the U.S. require less than 1 MW of electric power and less than 1,200 tons of cooling capacity. We are targeting customers in states with high electricity rates in the commercial sector, such as California, Connecticut, Massachusetts, New Hampshire, New Jersey, and New York. These regions also have high peak demand rates, which favor utilization of our modular units in groups so as to assure redundancy and peak demand savings. Some of these regions also have generous rebates that improve the economic viability of our systems.
We aggressively market to both potential domestic and international customers where utility pricing aligns with our advantages. These areas include regions that have strict emissions regulations, such as California, or those that reward CHP systems that are especially non-polluting, such as New Jersey. There are currently 23 states that recognize CHP as part of their Renewable Portfolio Standards or Energy Efficiency Resource Standards and several of them, including New York, California, Massachusetts, New Jersey, and North Carolina, have initiated specific incentive programs for CHP.
The traditional markets for CHP systems are buildings with long hours of operation and with corresponding demand for electricity and heat. Traditional customers for our cogeneration systems include hospitals and nursing homes, colleges and universities, health clubs and spas, hotels and motels, office and retail buildings, food and beverage processors, multi-unit residential buildings, laundries, ice rinks, swimming pools, factories, municipal buildings, and military installations.
Traditional customers for our chillers and heat pumps overlap with those for our cogeneration systems. Engine-driven chillers are often used as replacements for aging electric chillers because they both occupy similar amounts of floor space and require similar maintenance schedules.
Competition
Although we believe Tecogen offers customers a suite of premier best-in-class clean energy and thermal solutions, the market for our products is highly competitive. Our cogeneration products compete with the utility grid, existing technologies such as other reciprocating engine and microturbine CHP systems, and other emerging distributed generation technologies including solar power, wind-powered systems, and fuel cells. We believe that Capstone Turbine Corporation is the only microturbine manufacturer with a commercial presence in CHP.
Although solar and wind powered systems produce no emissions, the main drawbacks to these renewable powered systems are their dependence on weather conditions, their reliance on backup utility grid-provided power, and high capital costs that can often make these systems uneconomical without government subsidies. Similarly, while the market for fuel cells is still developing, a number of companies are focused on markets similar to ours. Fuel cells, like solar and wind powered systems, have received higher levels of incentives for the same type of applications as CHP systems in many territories. Management believes that, absent these higher government incentives, our CHP solutions provide a better value and more robust solution to end users in most applications.
Additionally, our patents relating to the Ultera ultra-low emissions technology give Tecogen products a strong competitive advantage in markets where severe emissions limits are imposed or where very clean power is favored, such as New Jersey, California, and Massachusetts.
Our products fall into the broad market category of distributed generation systems that produce electric power on-site to mitigate the drawbacks of traditional central power and the low efficiency of conventional heating processes.
Overall, we compete with end users’ other options for electrical power, heating and cooling on the basis of our clean technology’s ability to:
|
|
•
|
Provide power when a utility grid is not available or goes out of service;
|
|
|
•
|
Reduce the customer’s total cost of purchasing electricity and other fuel;
|
|
|
•
|
Reduce emissions of criteria pollutants (NOx and CO) to near-zero levels and cut the emission of greenhouse gas such as carbon dioxide;
|
|
|
•
|
Provide reliable on-site power generation, heating and cooling services; and
|
|
|
•
|
Control maintenance costs and ensure optimal peak equipment performance.
|
InVerde CHP
We believe that no other company has developed a product that competes with our inverter-based InVerde, which offers UL-certified grid connection, black-start capability, and patented variable-speed operation. An inverter-based product with at least some of these features has been introduced by others, but we believe that they face serious challenges in duplicating all the unique features of the InVerde. Product development time and costs could be significant, and we expect that our patents and license for Microgrid software will keep others from offering certain important functions.
Similarly, in the growing Microgrid segment, neither fuel cells nor microturbines can respond to changing energy loads when the system is disconnected from the utility grid. Engines such as those used in Tecogen’s equipment inherently have a fast dynamic response to step load changes, which is why they are the primary choice for emergency generators. Fuel cells and microturbines would require an additional energy storage device to be utilized in off-grid operation, giving our engine-driven solutions an advantage for Microgrid and resiliency applications.
TECOCHILL Chillers
The Company's TECOCHILL line of chiller is the only gas-engine-driven chiller available on the market. Natural gas can also fuel absorption chillers, which use fluids to transfer heat without an engine drive. However, engine chillers continue to have an efficiency advantage over absorption machines, TECOCHILL products reach efficiencies well above levels achieved by similarly sized absorption systems. Today’s low natural gas prices in the United States improve the economics of gas-fueled chillers while their minimal electric demand on back up power systems make them ideal for facilities requiring critical precision climate control.
Ilios Heat Pump
There are a few companies manufacturing gas-engine heat pumps, including Yanmar and Tedom. The Ilios water heater and other heat pump products compete in both the high-efficiency water heating market and the CHP market.
Research & Development
Tecogen has a long, rich, research and development tradition and sustained programs have allowed us to cultivate deep engineering expertise. We have strong core technical knowledge that is critical to product support and continuous product improvement efforts. Our TecoDrive engine, permanent magnet generator, cogeneration and chiller products, InVerde, Ilios heat pumps, and most recently the Ultera emissions control system were all created and optimized in-house with both public and private funding support.
We continue to seek to forge alliances with utilities, government agencies, universities, research facilities, and manufacturers. The Company has already succeeded in developing new technologies and products in collaboration with several entities, including:
|
|
•
|
Sacramento Municipal Utility District has provided test sites for the Company since 2010.
|
|
|
•
|
Southern California Gas Company and San Diego Gas & Electric Company, each a Sempra Energy subsidiary have granted us research and development contracts since 2004.
|
|
|
•
|
Department of Energy’s Lawrence Berkeley National Laboratory, research and development contracts executed since 2005, including ongoing Microgrid development work related to the InVerde.
|
|
|
•
|
Eastern Municipal Water District has co-sponsored demonstration projects to retrofit both a natural-gas powered municipal water pump engine, and a biofuel powered pumping station engine with the Ultera low emissions technology since 2012.
|
|
|
•
|
Consortium for Electric Reliability Technology Solutions executed research and development contracts, and provided a test site to the Company since 2005.
|
|
|
•
|
California Energy Commission executed research and development contracts from 2004 until March 2013.
|
|
|
•
|
The AVL California Technology Center has performed a support role in research and development contracts as well as internal research and development on our emission control system from August 2009 to November 2011. Currently, this testing center's work on emissions from gasoline vehicles which began in January of 2016 continues for the Ultra Emissions joint venture.
|
|
|
•
|
Propane Education & Research Council (PERC) executed research and development contracts for work related to developing Ultera for the propane powered fork truck market.
|
Our efforts to forge partnerships continue to focus on utilities, particularly to promote the InVerde, our most utility-friendly product. The nature of these alliances varies by utility, but could include simplified interconnection, joint marketing, ownership options, peak demand mitigation agreements, and customer services. We have commissioned a Microgrid with the Sacramento Municipal Utility District at its headquarters in Sacramento, California, where the central plant incorporated three InVerde systems equipped with our Ultera low-emissions technology. Some expenses for this project were reimbursed to the utility through a grant from the California Energy Commission.
Certain components of our InVerde product were developed through a grant from the California Energy Commission. This grant includes a requirement that we pay royalties on all sales of all products related to the grant. As of December 31, 2016, such royalties accrued in accordance with this grant agreement were less than $6,000 on an annual basis.
We also continue to leverage our resources with government and industry funding, which has yielded a number of successful developments, including the Ultera low-emissions technology, sponsored by the California Energy Commission and Southern California Gas Company. Pursuant to the terms of the grants from the California Energy Commission, the California Energy Commission has a royalty-free, perpetual, non-exclusive license to these technologies, for government purposes.
For the years ended
December 31, 2016
and
2015
, we spent approximately $
667,064
and $
591,585
, respectively, in research and development activities.
Intellectual Property
Patents
We currently hold six United States patents for our technologies:
|
|
•
|
9,470,126: "Assembly and method for reducing ammonia in exhaust of internal combustion engines." This patent, granted in October 2016, is related to the
Ultera
emission control system applicable to all of our products.
|
|
|
•
|
9,121,326: “Assembly and method for reducing nitrogen oxides, carbon monoxide and hydrocarbons in exhausts of internal combustion engines.” This patent, granted in September 2015, is related to the
Ultera
emission control system applicable to all of our products.
|
|
|
•
|
8,829,698: “Power generation systems.” This patent, granted in September 2014, is for a power generation system that includes an internal combustion engine configured to provide rotational mechanical energy.
|
|
|
•
|
8,578,704: “Assembly and method for reducing nitrogen oxides, carbon monoxide, and hydrocarbons in exhausts of internal combustion engines.” This patent, granted in November 2013, is for the
Ultera
emission system applicable to all our products.
|
|
|
•
|
7,239,034: “Engine driven power inverter system with cogeneration.” This patent, granted in July 2007, pertains to the utilization of an engine-driven CHP module combined with an inverter and applies to our
InVerde
product specifically.
|
|
|
•
|
7,243,017: “Method for controlling internal combustion engine emissions.” This patent, granted in July 2007, applies to the specific algorithms used in our engine controller for metering the fuel usage to obtain the correct combustion mixture and is technology used by most of our engines.
|
We have filed for several additional patents - most notable among them:
|
|
•
|
"Systems and methods for reducing emissions in exhaust of vehicles and producing electricity." This patent, filed in November 2015 and published in March 2016, is related to the development of the
Ultera
emission control system for vehicle applications.
|
|
|
•
|
“Poison-Resistant Catalyst and Systems Containing Same.” This application, filed in March 2016, relates to treatment of exhaust generated by internal combustion engines, combustion turbines, and boilers and more particularly to systems and method for treating exhausts containing one or more poisons, such as sulfur.
|
|
|
•
|
“Internal Combustion Engine Controller.” This application, filed in October 2015, relates to controllers and control circuits for controlling an internal combustion engine, including a gas fired internal combustion prime mover used for driving a generator for generating electrical power.
|
|
|
•
|
“Emissions Control Systems and Methods for Vehicles.” This application, filed in April 2016 relates to emissions control systems for vehicles.
|
In addition, the Company licensed specific rights to Microgrid algorithms developed by University of Wisconsin researchers for which we pay royalties to the assignee, The Wisconsin Alumni Research Foundation (WARF). The specific patent named in our agreement is “Control of small distributed energy resources” (7,116,010), granted in 2006. Our exclusive rights are valid for engine-driven systems utilizing natural gas or diesel fuel in the application of power generation where the per-unit output is less than 500 kW.
The software allows our products to be integrated as a Microgrid, where multiple InVerde units can be seamlessly isolated from the main utility grid in the event of an outage and re-connected to it afterward. The licensed software allows us to implement such a Microgrid with minimal control devices and associated complexity and cost. Tecogen pays WARF a royalty for each cogeneration module sold using the licensed technology. Such royalty payments have been in the range of $5,000 to $20,000 on an annual basis through the year ended December 31, 2016. In addition, WARF reserved the right to grant non-profit research institutions and governmental agencies non-exclusive licenses to practice and use, for non-commercial research purposes technology developed by Tecogen that is based on the licensed software.
We consider our patents and licensed intellectual property to be important in the operation of our business. The expiration, termination, or invalidity of one or more of these patents may have a material adverse effect on our business. Our earliest patent, licensed from WARF, was issued in 2006 and expires in 2022. Most of our current patents expire between 2022 and 2027.
We believe that one other company has developed a product that competes with our inverter-based InVerde. We anticipate that an inverter-based product with at least some of these features will be introduced by others, but we believe that competitors will face serious challenges in duplicating the InVerde. Product development time and costs would likely be significant, and we expect that our patent for the inverter-based CHP system (7,239,034) would offer significant protection, especially in key features. Likewise, we consider the Microgrid license with WARF to be a key feature of our InVerde product, and one that would be difficult to duplicate outside the patent.
In 2013, we purchased rights to designs and technologies including patents granted or pending for our permanent magnet generators. A key component of our InVerde module uses this acquired technology.
The recent issuance by the U.S. PTO of the patent for the Ultera low-emissions technology keeps that technology exclusive to us. It applies to all of our gas engine-driven products and may have licensing applications to other rich-burn spark-ignited internal combustion engines. We have also filed for or been granted patents for this technology in Europe, Australia, Brazil, Canada, China, Costa Rica, Dominican Republic, India, Japan, Mexico, New Zealand, Republic of Korea, Singapore, and South Africa. There is no assurance, however, that the Ultera low-emissions patent applications will be approved in any other country.
Copyrights
Our control software is protected by copyright laws or on an exclusive license agreement.
Trademarks
The Company has registered the brand names of our equipment and logos used on our equipment. These registered trademarks include Tecogen, Tecochill, Ultera, InVerde, Ilios, and the associated logos. We will continue to trademark our product names and symbols.
We rely on treatment of our technology as trade secrets through confidentiality agreements, which our employees and vendors are required to sign. Also, we rely on non-disclosure agreements with others that have or may have access to confidential information to protect our trade secrets and proprietary knowledge.
Sourcing & Manufacturing
We are focused on continuously strengthening our manufacturing processes and increasing operational efficiencies within the Company. Many of the components used in the manufacture of our highly-efficient clean energy equipment are readily fabricated from commonly available raw materials or are standardly available parts sourced from multiple suppliers. We believe that in most cases, adequate supply exists to meet our near to medium term manufacturing needs. Tecogen has an on-going focus on developing and implementing new systems to simplify our manufacturing processes, product sourcing methods, and our supply chain.
The Company has a combined total of approximately
26,000
square foot manufacturing and warehouse footprint running on a single 5-day per week shift at the Waltham, Massachusetts facility. We believe we have sufficient spare capacity to meet near to medium term demand without accruing additional fixed cost.
Government & Regulation
Several kinds of federal, state and local government regulations affect our current and future business, including but not exclusive to:
|
|
•
|
Product safety certifications and interconnection requirements;
|
|
|
•
|
Air pollution regulations, which govern the emissions allowed in engine exhaust;
|
|
|
•
|
State and federal incentives for CHP technology;
|
|
|
•
|
Various local building and permitting codes and third party certifications; and
|
|
|
•
|
Electric utility pricing and related regulations.
|
Our markets can be positively or negatively impacted by the effects of governmental and regulatory matters. We are impacted not only by energy policy, laws, regulations and incentives of governments in the markets in which we sell, but also by rules, regulations and costs imposed by utilities. Utility companies or governmental entities may place barriers on the installation or interconnection of our product with the electric grid. Further, utility companies may charge additional fees to customers who install on-site power generation; thereby reducing the electricity they take from the utility, or for having the capacity to use power from the grid for back-up or standby purposes. These types of restrictions, fees or charges could hamper the ability to install or effectively use our product, or increase the cost to our potential customers for using our systems. This could make our systems less desirable, adversely impacting our revenue and profitability. In addition, utility rate reductions can make our products less competitive, causing a material adverse effect on our operations. These costs, incentives and rules are not always the same as those faced by technologies with which we compete.
Similarly, rules, regulations, laws and incentives could also provide an advantage to our distributed generation solutions as compared with competing technologies if we are able to achieve required compliance in a lower cost, more efficient manner. Additionally, reduced emissions and higher fuel efficiency could help our customers combat the effects of global warming. Accordingly, we may benefit from increased government regulations that impose tighter emission and fuel efficiency standards. We encourage investors and potential investors to carefully consider associated Risk Factors detailed below which highlight various aspects of the regulatory environment and other related risks.
Employees
As of
December 31, 2016
, we employed
83
full-time employees and
3
part-time employees, including
7
sales and marketing personnel and
35
service personnel. We believe that our relationship with our employees is satisfactory.
Six
of our New Jersey service employees are represented by a collective bargaining agreement which was executed on
December 30, 2016
with an effective date of
January 1, 2017
.
Item 1A. Risk Factors
Our business, operations and the Company face many risks. The risks described below may not be the only risks we face. Additional risks that we do not yet know of, or that we currently think are immaterial, may also impair our business operations or financial results. If any of the events or circumstances described in the following risks occur, our business, financial condition or results of operations could suffer and the trading price of our common stock could decline. Investors and prospective investors should consider the following risks and the information contained under the heading ''Cautionary Note Concerning Forward-Looking Statements'' before deciding whether to invest in our securities.
Risks Relating to Our Business
We may be unable to fund our future operating requirements, which could force us to curtail our operations.
If the cash generated by operations is insufficient to fund our future operating requirements, we would need to raise additional funds through further public or private equity or debt financings depending upon prevailing market conditions. These financings may not be available to us, or if available, may be on terms that are not favorable to us and could result in significant dilution to our stockholders and reduction in the trading price of our stock. The state of worldwide capital markets could also impede our ability to raise additional capital on favorable terms or at all. If adequate capital were not available to us, we likely would be required to significantly curtail our operations or possibly even cease our operations.
If we experience a period of significant growth or expansion, it could place a substantial strain on our resources.
If our cogeneration and chiller products penetrate the market rapidly, we would be required to deliver even larger volumes of technically complex products or components to our customers on a timely basis and at a reasonable cost to us. We have never ramped up our manufacturing capabilities to meet significant large-scale production requirements. If we were to commit to deliver large volumes of products, we may not be able to satisfy these commitments on a timely and cost-effective basis.
Our operating history is characterized by net losses.
For each of our last five fiscal years and prior thereto, we have incurred annual operating losses. We do not expect this trend to continue. We believe we have adequate cash resources to reach the point of full year profitability. Even if we do achieve this annual profitability, we may be unable to increase our sales and sustain or increase our profitability in the future.
We are dependent on a limited number of third-party suppliers for the supply of key components for our products.
We use third-party suppliers for components in all of our products. Our engine supplier, generator supplier for cogeneration products (other than the InVerde), and the compressor and vessel sets in our chillers, are all purchased from large multinational equipment manufacturers. The loss of one or more of our suppliers could materially, and adversely affect our business if we are unable to replace them. While alternate suppliers for the manufacture of our engine, generator and compressor have been identified, should the need arise, there can be no assurance that alternate suppliers will be available and able to manufacture our engine, generator or compressor on acceptable terms.
From time to time, shipments can be delayed because of industry-wide or other shortages of necessary materials and components from third-party suppliers, as well as shipping delays at points of importation. A supplier's failure to supply components in a timely manner, or to supply components that meet our quality, quantity, or cost requirements, or our inability to obtain substitute sources of these components on a timely basis or on terms acceptable to us, could impair our ability to deliver our products in accordance with contractual obligations.
The amount of Tecogen’s backlog is subject to fluctuation due to its customers’ experiencing unexpected delays in financing, permitting or modifications in specifications of the equipment.
Tecogen’s total product and installation backlog as of December 31, 2016 was $11.1 million compared to $11.6 million as of December 31, 2015. Although Tecogen expects its customers to issue definitive purchase orders with respect to such backlog, there can be no assurance that such amounts will not be subject to modification in the event customers experience unexpected delays in obtaining permits, interconnection agreements or financing. Any of such events may result in customers modifying the equipment or the terms or timing of the expected installation, which may result in changes to the amount of backlog attributed to those projects.
We expect significant competition for our products and services.
Many of our competitors and potential competitors are well established and have substantially greater financial, research and development, technical, manufacturing and marketing resources than we do. If these larger competitors decide to focus on the development of distributed power or cogeneration, they have the manufacturing, marketing and sales capabilities to complete research, development and commercialization of these products more quickly and effectively than we can. There can also be no assurance that current and future competitors will not develop new or enhanced technologies or more cost-effective systems, and therefore, there can be no assurance that we will be successful in this competitive environment.
If we are unable to maintain our technological expertise in design and manufacturing processes, we will not be able to successfully compete.
We believe that our future success will depend upon our ability to continue to develop and provide innovative products and product enhancements that meet the increasingly sophisticated needs of our customers.
However, this requires that we successfully anticipate and respond to technological changes in design and manufacturing processes in a cost-effective and timely manner. The development of new, technologically advanced products and enhancements is a complex and uncertain process requiring high levels of innovation, as well as the accurate anticipation of technological and market trends. There can be no assurance that we will successfully identify new product opportunities, develop and bring new or enhanced products to market in a timely manner, successfully lower costs, and achieve market acceptance of our products, or that products and technologies developed by others will not render our products or technologies obsolete or noncompetitive.
The introduction of products embodying new technologies, and the shifting of customer demands or changing industry standards, could render our existing products obsolete and unmarketable. We may experience delays in releasing new products and product enhancements in the future. Material delays in introducing new products or product enhancements may cause customers to forego purchases of our products and purchase those of our competitors.
Our intellectual property may not be adequately protected.
We seek to protect our intellectual property rights through patents, trademarks, copyrights, trade secret laws, confidentiality agreements, and licensing arrangements, but we cannot ensure that we will be able to adequately protect our technology from misappropriation or infringement. We cannot ensure that our existing intellectual property rights will not be invalidated, circumvented, challenged, or rendered unenforceable.
Our competitors may successfully challenge the validity of our patents, design non-infringing products, or deliberately infringe our patents. There can be no assurance that other companies are not investigating or developing other similar technologies. In addition, our intellectual property rights may not provide a competitive advantage to us or ensure that our products and technology will be adequately covered by our patents and other intellectual property. Any of these factors or the expiration, termination, or invalidity of one or more of our patents may have a material adverse effect on our business.
Others may assert that our technology infringes their intellectual property rights.
We may be subject to infringement claims in the future. The defense of any claims of infringement made against us by third parties could involve significant legal costs and require our management to divert time from our business operations. If we are unsuccessful in defending any claims of infringement, we may be forced to obtain licenses or to pay additional royalties to continue to use our technology. We may not be able to obtain any necessary licenses on commercially reasonable terms or at all. If we fail to obtain necessary licenses or other rights, or if these licenses are costly, our operating results would suffer either from reductions in revenues through our inability to serve customers or from increases in costs to license third-party technologies.
Our success is dependent upon attracting and retaining highly qualified personnel and the loss of key personnel could significantly hurt our business.
To achieve success, we must attract and retain highly qualified technical, operational and executive employees. The loss of the services of key employees or an inability to attract, train and retain qualified and skilled employees, specifically engineering, operations, and business development personnel, could result in the loss of business or could otherwise negatively impact our ability to operate and grow our business successfully.
Our business is subject to product liability and warranty claims.
Our business exposes us to potential product liability claims, which are inherent in the manufacturing, marketing and sale of our products, and we may face substantial liability for damages resulting from the faulty design or manufacture of products or improper use of products by end users. We currently maintain a moderate level of product liability insurance, but there can be no assurance that this insurance will provide sufficient coverage in the event of a claim. Also, we cannot predict whether we will be able to maintain such coverage on acceptable terms, if at all, or that a product liability claim would not harm our business or financial condition. In addition, negative publicity in connection with the faulty design or manufacture of our products would adversely affect our ability to market and sell our products.
We sell our products with warranties. There can be no assurance that the provision in our financial statements for estimated product warranty expense will be sufficient. We cannot ensure that our efforts to reduce our risk through warranty disclaimers will effectively limit our liability. Any significant occurrence of warranty expense in excess of estimates could have a material adverse effect on our operating results, financial condition and cash flow. Further, we have at times undertaken programs to enhance the performance of units previously sold. These enhancements have at times been provided at no cost or below our cost. If we choose to offer such programs again in the future, such actions could result in significant costs.
Utilities or governmental entities could hinder our entry into and growth in the marketplace, and we may not be able to effectively sell our products.
Utilities or governmental entities on occasion have placed barriers to the installation of our products or their interconnection with the electric grid, and they may continue to do so. Utilities may charge additional fees to customers who install on-site CHP and rely on the grid for back-up power. These types of restrictions, fees, or charges could make it harder for customers to install our products or use them effectively, as well as increasing the cost to our potential customers. This could make our systems less desirable, thereby adversely affecting our revenue and other operating results.
We may not achieve production cost reductions necessary to competitively price our products, which would adversely affect our sales.
We believe that we will need to reduce the unit production cost of our products over time to maintain our ability to offer competitively priced products. Our ability to achieve cost reductions will depend on our ability to develop low-cost design enhancements, to obtain necessary tooling and favorable supplier contracts, and to increase sales volumes so we can achieve economies of scale. We cannot assure you that we will be able to achieve any such production cost reductions. Our failure to do so could have a material adverse effect on our business and results of operations.
Our products involve a lengthy sales cycle and we may not anticipate sales levels appropriately, which could impair our results of operations.
The sale of our products typically involves a significant commitment of capital by customers, with the attendant delays frequently associated with large capital expenditures. For these and other reasons, the sales cycle associated with our products is typically lengthy and subject to a number of significant risks over which we have little or no control. We expect to plan our production and inventory levels based on internal forecasts of customer demand, which is highly unpredictable and can fluctuate substantially. If sales in any period fall significantly below anticipated levels, our financial condition, results of operations and cash flow would suffer. If demand in any period increases well above anticipated levels, we may have difficulties in responding, incur greater costs to respond, or be unable to fulfill the demand in sufficient time to retain the order, which would negatively impact our operations. In addition, our operating expenses are based on anticipated sales levels, and a high percentage of our expenses are generally fixed in the short term. As a result of these factors, a small fluctuation in timing of sales can cause operating results to vary materially from period to period.
The economic viability of our projects depends on the price spread between fuel and electricity, and the variability of these prices creates a risk that our projects will not be economically viable and that potential customers will avoid such energy price risks.
The economic viability of our CHP products depends on the spread between natural gas fuel and electricity prices. Volatility in one component of the spread, such as the cost of natural gas and other fuels (e.g., propane or distillate oil), can be managed to some extent by means of futures contracts. However, the regional rates charged for both base load and peak electricity may decline periodically due to excess generating capacity or general economic recessions.
Our products could become less competitive if electric rates were to fall substantially in the future, noting that historically the rates have not had any sustained decline in price. Also, potential customers may perceive the unpredictable swings in natural gas and electricity prices as an increased risk of investing in on-site CHP, and may decide not to purchase CHP products.
We are exposed to credit risks with respect to some of our customers
.
To the extent our customers do not advance us sufficient funds to finance our costs during the execution phase of our contracts, we are exposed to the risk that they will be unable to accept delivery or that they will be unable to make payment at the time of delivery.
We may make acquisitions or take other corporate strategic actions that could harm our financial performance.
To expedite development of our corporate infrastructure, particularly with regard to equipment installation and service functions, we anticipate the future acquisition of complementary businesses. Risks associated with such acquisitions include the disruption of our existing operations, loss of key personnel in the acquired companies, dilution through the issuance of additional securities, assumptions of existing liabilities, and commitment to further operating expenses. If any or all of these problems actually occur, acquisitions could negatively impact our financial performance and future stock value.
The Company has also announced a number of corporate strategic actions, including a proposed all-stock acquisition of ADGE as well as transactions related to the Company's ownership interest in certain joint ventures. If the execution or implementation of these transactions is not successful, it could adversely impact the Company's financial condition, cash flows and results of operations.
Risks Relating to Tecogen's Proposed Acquisition of ADGE
On November 1, 2016, Tecogen and Tecogen.ADGE Acquisition Corp. (“Merger Sub”), a wholly owned subsidiary of Tecogen formed for the purpose of the merger, entered into an Agreement and Plan of Merger (the “Merger Agreement”) with ADGE. Tecogen’s and ADGE’s obligations to effect the Merger are subject to certain conditions, including that the Merger be approved by a vote of each of Tecogen’s and ADGE’s stockholders at separate special meetings of such stockholders. There is no assurance that such conditions will be satisfied or that Tecogen’s or ADGE’s stockholders will approve such proposals.
Tecogen’s obligations and the obligations of ADGE to complete the transaction are subject to satisfaction or waiver of a number of conditions. Tecogen’s obligations and the obligations of American DG are each subject to, among other conditions: (i) approval of the Merger by the respective stockholders of ADGE and Tecogen, (ii) approval of the listing on the Nasdaq Capital Market of the shares of Tecogen common stock to be issued in the Merger, upon official notice of issuance, (iii) the effectiveness of Tecogen’s Form S-4 registration statement under the Securities Act of 1933, as amended, (iv) the absence of any applicable law or order that prohibits completion of the transaction, (v) the accuracy of the representations and warranties made in the Merger Agreement by Tecogen and ADGE, subject to certain materiality qualifications, and (vi) the performance in all material respects of the material obligations required to be performed by Tecogen and ADGE at or prior to the Merger effective time.
The satisfaction of the required conditions could delay the completion of the transaction for a significant period of time or prevent it from occurring. Any delay in completing the transaction could cause Tecogen or ADGE not to realize some or all of the benefits that Tecogen or ADGE expect to achieve if the transaction is successfully completed within its expected time frame. Further, there can be no assurance that the conditions to the closing of the transaction will be satisfied or waived or that the transaction will be completed.
The completion of the Merger is not conditioned on the receipt of an opinion of counsel to the effect that the transaction will qualify for the intended tax treatment, and neither Tecogen nor ADGE intends to request a ruling from the Internal Revenue Service regarding the United States federal income tax consequences of the transaction.
It is intended that, for United States federal income tax purposes, the Merger will qualify as a “reorganization” within the meaning of Section 368(a) of the Internal Revenue Code (the “intended tax treatment”). However, the completion of the transaction is not conditioned on the transaction qualifying for the intended tax treatment or on the receipt of an opinion of counsel to that effect, and whether or not the transaction will qualify for the intended tax treatment depends on facts that will not be known until the transaction is completed. No assurance can be given that the transaction will qualify for the intended tax treatment. In addition, neither Tecogen nor ADGE intends to request a ruling from the Internal Revenue Service regarding the United States federal income tax consequences of the transaction. Accordingly, even if Tecogen and ADGE conclude that the transaction qualifies for the intended tax treatment, no assurance can be given that the Internal Revenue Service will not challenge that conclusion or that a court would not sustain such a challenge.
It will not be known at the time of the special meeting whether the requirements for the transaction to qualify for the intended tax treatment will be met.
Failure to complete the transaction could negatively impact Tecogen’s and ADGE’s stock prices and Tecogen’s and ADGE’s future business and financial results.
If the transaction is not completed for any reason, including as a result of Tecogen’s stockholders failing to approve the Merger, Tecogen’s and ADGE’s ongoing businesses may be adversely affected and, without realizing any of the benefits of having completed the transaction, Tecogen and ADGE would be subject to a number of risks, including the following:
|
|
•
|
Tecogen and ADGE may experience negative reactions from the financial markets, including negative impacts on the stock prices and debt instruments of Tecogen or ADGE;
|
|
|
•
|
Tecogen and ADGE may experience negative reactions from our respective customers and employees;
|
|
|
•
|
Tecogen and ADGE will be required to pay certain costs relating to the transaction, whether or not the transaction is completed;
|
|
|
•
|
the Merger Agreement places certain restrictions on the conduct of Tecogen’s and ADGE’s businesses prior to completion of the transaction. Such restrictions, the waiver of which is subject to the consent of the other party (not to be unreasonably withheld, conditioned or delayed), may prevent Tecogen and ADGE from making certain acquisitions or taking other specified actions during the pendency of the transaction;
|
|
|
•
|
matters relating to the transaction (including integration planning) will require substantial commitments of time and resources by Tecogen’s and ADGE’s management, which would otherwise have been devoted to day-to-day operations and other opportunities that may have been beneficial to either us or Tecogen as an independent company.
|
Further, Tecogen and ADGE could be subject to litigation related to any failure to complete the transaction or related to any proceeding commenced against Tecogen or ADGE to enforce performance of their respective obligations under the Merger Agreement. If the transaction is not completed, these risks may materialize and may adversely affect Tecogen’s and ADGE’s businesses, financial condition, financial results and stock prices.
Although Tecogen expects that the transaction will result in synergies and other benefits to Tecogen, Tecogen may not realize those benefits because of difficulties related to integration, the realization of synergies, and other challenges.
Tecogen and ADGE have operated and, until completion of the transaction, will continue to operate, independently, and there can be no assurances that the respective businesses can be combined in a manner that allows for the achievement of substantial benefits. It is possible that there could be loss of Tecogen’s or ADGE’s key employees, the loss of customers, the disruption of either company’s or both companies’ ongoing businesses or unexpected issues, higher than expected costs and an overall post-completion process that takes longer than originally anticipated. Specifically, the following issues, among others, must be addressed in combining Tecogen’s and ADGE’s operations in order to realize the anticipated benefits of the transaction so the combined company performs as the parties hope:
|
|
•
|
combining the companies’ corporate functions;
|
|
|
•
|
combining Tecogen’s and ADGE’s businesses in a manner that permits Tecogen to achieve the synergies anticipated to result from the transaction, the failure of which would result in the anticipated benefits of the transaction not being realized in the time frame currently anticipated or at all;
|
|
|
•
|
maintaining existing agreements with customers, distributors, and vendors and avoiding delays in entering into new agreements with prospective customers, distributors, and vendors;
|
|
|
•
|
determining whether and how to address possible differences in corporate cultures and management philosophies;
|
|
|
•
|
integrating fully the companies’ administrative and technology infrastructures; and
|
|
|
•
|
effecting potential actions that may be required in connection with obtaining regulatory approvals.
|
In addition, at times the attention of certain members of either company’s or both companies’ management and resources may be focused on completion of the transaction and integration planning of the businesses of the two companies and diverted from day-to-day business operations, which may disrupt each company’s ongoing business and the business of the combined company.
The transaction may not be accretive, and may be dilutive, to Tecogen’s earnings per share, which may negatively affect the market price of Tecogen’s common stock.
Tecogen currently expects the transaction to be accretive to its adjusted earnings per share within 12 months after the completion of the transaction. This expectation, however, is based on preliminary estimates that may materially change. In addition, Tecogen could fail to realize all the benefits anticipated in the transaction or experience delays or inefficiencies in realizing such benefits. Such factors could, combined with the issuance of shares of Tecogen common stock in the Merger, result in the transaction being dilutive to Tecogen’s earnings per share, which could negatively affect the market price of shares of Tecogen’s common stock.
Tecogen may incur substantial expenses related to the Merger.
Tecogen may incur substantial expenses in connection with consummating the Merger and integrating ADGE’s business, operations, networks, systems, technologies, policies and procedures with its own. While Tecogen expects to incur a certain level of transaction and integration expenses, factors beyond Tecogen’s control could affect the total amount or the timing of its integration expenses. Many of the expenses that will be incurred, by their nature, are difficult to estimate accurately at the present time. As a result, the transaction and integration expenses associated with the Merger could, particularly in the near term, exceed the savings that Tecogen expects to achieve from the elimination of duplicative expenses and the realization of economies of scale and cost savings related to the integration of the businesses following the completion of the Merger.
Risks Relating to Ownership of our Common Stock
Investment in our Common Stock is subject to price fluctuations and market volatility.
Historically, valuations of many small companies have been highly volatile. The securities of many small companies have experienced significant price and trading volume fluctuations, unrelated to the operating performance or the prospects of such companies. The market price of shares of our Common Stock could be subject to wide fluctuations in response to many risk factors listed in this section, and others beyond our control, including:
|
|
•
|
results and timing of our product development;
|
|
|
•
|
results of the development of our competitors’ products;
|
|
|
•
|
regulatory actions with respect to our products or our competitors’ products;
|
|
|
•
|
actual or anticipated fluctuations in our financial condition and operating results;
|
|
|
•
|
actual or anticipated changes in our growth rate relative to our competitors;
|
|
|
•
|
actual or anticipated fluctuations in our competitors’ operating results or changes in their growth rate;
|
|
|
•
|
competition from existing products or new products that may emerge;
|
|
|
•
|
announcements by us or our competitors of significant acquisitions, strategic partnerships, joint ventures, collaborations, or capital commitments;
|
|
|
•
|
issuance of new or updated research or reports by securities analysts;
|
|
|
•
|
fluctuations in the valuation of companies perceived by investors to be comparable to us;
|
|
|
•
|
share price and volume fluctuations attributable to inconsistent trading volume levels of our shares;
|
|
|
•
|
additions or departures of key management or personnel;
|
|
|
•
|
disputes or other developments related to proprietary rights, including patents, litigation matters, and our ability to obtain, maintain, defend or enforce proprietary rights relating to our products and technologies;
|
|
|
•
|
announcement or expectation of additional financing efforts;
|
|
|
•
|
sales of our Common Stock by us, our insiders, or our other stockholders; and
|
|
|
•
|
general economic and market conditions.
|
Furthermore, the stock markets have experienced extreme price and volume fluctuations that have affected and continue to affect the market prices of equity securities of many companies. These fluctuations often have been unrelated or disproportionate to the operating performance of those companies. These broad market and industry fluctuations, as well as general economic, political, and market conditions such as recessions, interest rate changes, or international currency fluctuations, may negatively impact the market price of shares of our Common Stock. In addition, such fluctuations could subject us to securities class action litigation, which could result in substantial costs and divert our management’s attention from other business concerns, which could potentially harm our business.
We experience significant fluctuations in revenues from quarter to quarter on our product sales.
We have low volume, high dollar sales for projects that are generally non-recurring, and therefore our sales have fluctuated significantly from period to period. For example, when compared to the previous quarter, our revenues in 2016 increased in each consecutive quarter. In 2015, our revenues increased during the first quarter, remained relatively flat in the second quarter, decreased in the third quarter, and slightly increased in the forth quarter. Fluctuations cannot be predicted because they are affected by the purchasing decisions and timing requirements of our customers, which are unpredictable.
We may be subject to litigation, which is expensive and could divert management attention.
Our share price may be volatile and in the past companies that have experienced volatility in the market price of their stock have been subject to an increased incidence of securities class action litigation. We may be the target of this type of litigation in the future. Securities litigation against us could result in substantial costs and divert our management’s attention from other business concerns, which could seriously harm our business.
If securities or industry analysts do not publish research or publish inaccurate or unfavorable research about our business, our share price and trading volume could decline.
The trading market for our Common Stock will depend on the research and reports that securities or industry analysts publish about us or our business. We do not have any control over these analysts. There can be no assurance that analysts will cover us, or provide favorable coverage. If one or more analysts downgrade our stock or change their opinion of our stock, our share price would likely decline. In addition, if one or more analysts cease coverage of our company or fail to regularly publish reports on us, we could lose visibility in the financial markets, which could cause our share price or trading volume to decline.
Because our directors and executive officers are among our largest stockholders, they can exert influence over our business and affairs and have actual or potential interests that may depart from other stockholders or investors.
As of March 21, 2017, our directors and executive officers collectively beneficially own approximately 19.1% of our issued and outstanding common stock. Our directors and executive officers are entitled to cast an aggregate of approximately 3,522,833 votes on matters submitted to our stockholders for a vote or approximately 17.58% of the total number of votes entitled to be cast at a meeting of our stockholders. John Hatsopoulos, our co-Chief Executive Officer and a director, beneficially owns approximately 16.23% of our issued and outstanding common stock entitling him to cast an aggregate of approximately 3,252,395 votes on matters submitted to our stockholders for a vote or approximately 16.23% of the total number of votes entitled to be cast at a meeting of our stockholders. Additionally, the holdings of our directors and executive officers may increase in the future upon vesting or other maturation of exercise rights under any of the options or warrants they may hold or in the future be granted or if they otherwise acquire additional shares of our common stock. The interests of such persons may differ from the interests of our other stockholders. As a result, in addition to their board seats and offices, such persons will have influence over corporate actions requiring shareholder approval.
Such persons’ stock ownership may discourage a potential acquirer from making a tender offer or otherwise attempting to acquire us, which in turn could reduce our stock price or prevent our stockholders from realizing a premium over our stock price.
Current stockholdings may be diluted if we make future equity issuances or if outstanding warrants or options are exercised for shares of our common stock.
“Dilution” refers to the reduction in the voting effect and proportionate ownership interest of a given number of shares of common stock as the total number of shares increases. Our issuance of additional stock, convertible preferred stock and convertible debt may result in dilution to the interests of shareholders and may also result in the reduction of your stock price. The sale of a substantial number of shares into the market, or even the perception that sales could occur, could depress the price of the common stock. Also, the exercise of warrants and options may result in additional dilution.
As of December 31, 2016, an aggregate of
1,367,918
shares of common stock are issuable upon exercise of outstanding warrants and options. The holders of outstanding warrants (and other convertible securities or derivatives, if any are subsequently issued) have the opportunity to profit from a rise in the market price of our common stock, if any, without assuming the risk of ownership, with a resulting dilution in the interests of other stockholders. We may find it more difficult to raise additional equity capital if it should be needed for our business while the options, warrants and convertible securities are outstanding. At any time at which the holders of the options, warrants or convertible securities might be expected to exercise or convert them, we would probably be able to obtain additional capital on terms more favorable than that provided by those securities.
Future sales of common stock by our existing stockholders may cause our stock price to fall.
The market price of our common stock could decline as a result of sales by our existing stockholders of shares of common stock in the market or the perception that these sales could occur. These sales might also make it more difficult for us to sell equity securities at a time and price that we deem appropriate and thus inhibit our ability to raise additional capital when it is needed.
Because we have not and do not intend to pay cash dividends, our stockholders receive no current income from holding our stock.
We have paid no cash dividends on our capital stock to date and we currently intend to retain our future earnings, if any, to fund the development and growth of our business. We currently expect to retain earnings for use in the operation and expansion of our business, and therefore do not anticipate paying any cash dividends in the foreseeable future. In addition, the terms of any future debt or credit facility may preclude us from paying any cash dividends. In addition, the Company’s outstanding convertible note provides that the Company shall not declare, pay or authorize any dividend without the prior consent of the note holder. As a result, capital appreciation, if any, of our common stock could be the sole source of gain for our stockholders for the foreseeable future.
Failure to comply with the Nasdaq Capital Market continued listing requirements could lead to the commencement of delisting proceedings in accordance the Nasdaq rules. Delisting could limit investors' ability to effect transactions in the Company's securities and subject the stock to additional trading restrictions.
The Company’s common stock is listed on the Nasdaq Capital Market, a national securities exchange. To maintain such listing, the Company is required to meet its continued listing requirements. If the Company is unable to maintain the listing of its stock on Nasdaq or another exchange for failure to comply with the continued listing requirements, including timely filing of Exchange Act reports and compliance with Nasdaq’s corporate governance requirements, the Company and its security holders could face significant material adverse consequences including a limited availability of market quotations for its stock and a decreased ability to issue additional securities or obtain additional financing in the future.
Certain provisions of our charter and bylaws may discourage mergers and other transactions.
Certain provisions of our certificate of incorporation and bylaws may make it more difficult for someone to acquire control of us. These provisions may make it more difficult for stockholders to take certain corporate actions and could delay or prevent someone from acquiring our business. These provisions could limit the price that certain investors might be willing to pay for shares of our common stock. The ability to issue “blank check” preferred stock is a traditional anti-takeover measure. This provision may be beneficial to our management and the board of directors in a hostile tender offer, and may have an adverse impact on stockholders who may want to participate in such tender offer, or who may want to replace some or all of the members of the board of directors.
Our board of directors may issue additional shares of preferred stock without stockholder approval.
Our certificate of incorporation authorizes the issuance of up to 10,000,000 shares of preferred stock. Accordingly, our board of directors may, without shareholder approval, issue one or more new series of preferred stock with rights which could adversely affect the voting power or other rights of the holders of outstanding shares of common stock. In addition, the issuance of shares of preferred stock may have the effect of rendering more difficult or discouraging, an acquisition or change of control of us. Although we do not have any current plans to issue any shares of preferred stock, we may do so in the future.
Investor confidence in the price of our stock may be adversely affected if we are unable to comply with Section 404 of the Sarbanes-Oxley Act of 2002.
As of the end of the period covered by this report, our principal executive officers and principal financial and accounting officer have concluded there is a material weakness in our disclosure controls and procedures and our internal control over financial reporting, which could harm our operating results or cause us to fail to meet our reporting obligations.
As an SEC registrant, we are subject to the rules adopted by the SEC pursuant to Section 404 of the Sarbanes-Oxley Act of 2002, which require us to include in our annual report on Form 10-K our management’s report on, and assessment of the effectiveness of, our internal control over financial reporting (“management’s report”). If we fail to achieve and maintain the adequacy of our internal control over financial reporting, there is a risk that we will not comply with all of the requirements imposed by Section 404. Moreover, effective internal control over financial reporting, particularly that relating to revenue recognition, is necessary for us to produce reliable financial reports and is important in helping to prevent financial fraud. Any of these possible outcomes could result in an adverse reaction in the financial marketplace due to a loss in investor confidence in the reliability of our financial statements, which ultimately could harm our business and could negatively impact the market price of our common stock. Investor confidence and the price of our common stock may be adversely affected if we are unable to comply with Section 404 of the Sarbanes-Oxley Act of 2002.
As of the end of the period covered by this Annual Report,
December 31, 2016
, our principal executive officers and principal accounting officer performed an evaluation of disclosure controls and procedures and concluded that our controls were not effective to provide reasonable assurance that information required to be disclosed by our Company in reports that we file under the Exchange Act, is recorded, processed, summarized and reported as when required. Management conducted an evaluation of our internal control over financial reporting and based on this evaluation, management concluded that the company’s internal control over financial reporting was not effective as of
December 31, 2016
. The Company currently does not have personnel with a sufficient level of accounting knowledge, experience and training in the selection, application and implementation of generally acceptable accounting principles as it relates to complex transactions and financial reporting requirements. The Company also has a small number of employees dealing with general controls over information technology security and user access. This constitutes a material weakness in financial reporting. Any failure to implement effective internal controls could harm our operating results or cause us to fail to meet our reporting obligations. Inadequate internal controls could also cause investors to lose confidence in our reported financial information, which could have a negative effect on the trading price of our common stock, and may require us to incur additional costs to improve our internal control system.
In order to comply with public reporting requirements, we must continue to strengthen our financial systems and controls, and failure to do so could adversely affect our ability to provide timely and accurate financial statements.
Refinement of our internal controls and procedures will be required as we manage future growth successfully and operate effectively as a public company. Such refinement of our internal controls, as well as compliance with the Sarbanes-Oxley Act of 2002 and related requirements, will be costly and will place a significant burden on management. We cannot assure you that measures already taken, or any future measures, will enable us to provide accurate and timely financial reports, particularly if we are unable to hire additional personnel in our accounting and financial department, or if we lose personnel in this area. Any failure to improve our internal controls or other problems with our financial systems or internal controls could result in delays or inaccuracies in reporting financial information, or non-compliance with SEC reporting and other regulatory requirements, any of which could adversely affect our business and stock price.
The JOBS Act allows us to postpone the date by which we must comply with certain laws and regulations and reduces the amount of information provided by us in reports filed with the SEC. We cannot be certain if the reduced disclosure requirements applicable to emerging growth companies will make our Common Stock less attractive to investors.
We are and we will remain an “emerging growth company”, as defined in the Jumpstart Our Business Startups Act of 2012, or the JOBS Act, until the earliest to occur of (i) the last day of the fiscal year during which our total annual gross revenues equal or exceed $1 billion (subject to adjustment for inflation), (ii) the last day of the fiscal year following the fifth anniversary of our initial public offering, (iii) the date on which we have, during the previous three-year period, issued more than $1 billion in non-convertible debt, or (iv) the date on which we are deemed a large accelerated filer under the Exchange Act.
For so long as we remain an emerging growth company we are not required to:
|
|
•
|
have an auditor report on our internal controls over financial reporting pursuant to Section 404(b) of the Sarbanes-Oxley Act;
|
|
|
•
|
comply with any requirement that may be adopted by the Public Company Accounting Oversight Board regarding mandatory audit firm rotation or a supplement to the auditor’s report providing additional information about the audit and the financial statements (i.e., an auditor discussion and analysis);
|
|
|
•
|
submit certain executive compensation matters to shareholder non-binding advisory votes;
|
|
|
•
|
submit for shareholder approval golden parachute payments not previously approved; and
|
|
|
•
|
disclose certain executive compensation related items such as the correlation between executive compensation and financial performance and comparisons of the Chief Executive Officer’s compensation to median employee compensation, when such disclosure requirements are adopted.
|
In addition, Section 107 of the JOBS Act also provides that an emerging growth company can take advantage of the extended transition period provided in Section 7(a)(2)(B) of the Securities Act of 1933, as amended, or the Securities Act, for complying with new or revised accounting standards. An emerging growth company can therefore delay the adoption of certain accounting standards until those standards would otherwise apply to private companies. However, we have chosen to “opt out” of such extended transition period, and as a result, we will comply with new or revised accounting standards on the relevant dates on which adoption of such standards is required for non-emerging growth companies. Section 107 of the JOBS Act provides that our decision to opt out of the extended transition period for complying with new or revised accounting standards is irrevocable.
We cannot predict if investors will find our Common Stock less attractive because we may rely on some of these exemptions. If some investors find our Common Stock less attractive as a result, there may be a less active trading market for our Common Stock and our stock price may be more volatile. If we avail ourselves of certain exemptions from various reporting requirements, our reduced disclosure may make it more difficult for investors and securities analysts to evaluate us and may result in less investor confidence.
Item 1B. Unresolved Staff Comments.
Disclosure in response to this item is not required of a smaller reporting company.
Item 2. Properties.
Our headquarters is located in Waltham, Massachusetts, and consists of approximately
43,000
square feet of leased space, of which Tecogen occupies approximately
40,000
square feet of manufacturing, storage and office space. We sub-lease the remaining space to ADGE. Our lease will expire
March 31, 2024
. We believe that our facilities are appropriate and adequate for our current needs.
Our
nine
leased service centers can be broken into two different sizes. The larger of the two has office space to accommodate administrative, sales and engineering personnel, and warehouse space to stock parts in support of our service contracts.
As of
December 31, 2016
, the service centers that fit this larger category are based in Piscataway, New Jersey, Valley Stream and Buchanan, New York to service the Metro New York City and the Mid-Atlantic region. The San Francisco bay area and Northern California is served by such a center in Hayward, California. A portion of the Corporate headquarters in Waltham, Massachusetts is used in this manner to service Boston and northern New England.
The smaller type service center is a parts depot or warehouse for the stocking of parts in support of our service contracts. These centers are located in Los Angeles, California, Sterling Heights, Michigan, Newark, New York, and East Windsor, Connecticut.