San Gold Corporation (TSX:SGR)(OTCQX:SGRCF) today announced the
results of drilling conducted since January in the 007 Zone of the
company's Rice Lake Mining Complex in Manitoba, Canada.
Drilling on the 007 Zone occurred throughout the year, from
surface and underground drilling stations, in order to infill and
extend the zone both along strike and to depth. At the beginning of
2011, the 007 Zone had a limited strike length of less than 200 m.
A second new zone, then known as Emperor, was located approximately
300 m to the east along the same horizon. Drilling during the year
to the east of 007 resulted first in the discovery of 007 East(730
zone) and then 007 Far East(740 zone). As drilling progressed
during the year, it was determined that all four zones including
the Emperor were part of a continuous stretch of mineralization
extending about 500 m (1,640 feet) along strike.
Results obtained from the 2011 drilling program demonstrate
consistent grades and widths throughout the 007 Zone, as
highlighted by the following drill holes:
-- S922-11-036, intersecting 23.2 g/tonne over 11.5 metres at a depth of
362 metres
-- S922-11-013, intersecting 110.1 g/tonne over 2.1 metres at a depth of
330 metres
-- S922-11-049, intersecting 44.2 g/tonne over 4.3 metres at a depth of 348
metres
-- S922-11-089, intersecting 63.0 g/tonne over 2.8 metres at a depth of 362
metres
-- S922-11-091, intersecting 21.7 g/tonne over 7.4 metres at a depth of 362
metres
-- S915-11-003, intersecting 11.8 g/tonne over 12.3 metres at a depth of
396 metres
-- S915-11-024, intersecting 60.7 g/tonne over 3.0 metres at a depth of 275
metres
-- S915-11-045, intersecting 45.6 g/tonne over 4.3 metres at a depth of 291
metres
-- S915-11-084, intersecting 17.4 g/tonne over 9.4 metres at a depth of 269
metres
-- S915-11-106, intersecting 18.1 g/tonne over 3.2 metres at a depth of 358
metres
"These results provide a detailed account of one of the richest
gold deposits ever discovered in Manitoba. It's extremely
impressive that a gold deposit that wasn't even known about two
years ago will be contributing 50% of our mill feed well into the
foreseeable future," said George Pirie, San Gold's President and
Chief Executive Officer.
The 007 Zone is located along and within the Shoreline Basalt
rock unit. San Gold views the full length of the Shoreline Basalt
and similar parallel rock units as extremely prospective. In 2012,
San Gold's drilling program will pursue the 007 Zone westward
towards the L10 Zone, a region that has already returned
encouraging results. San Gold will also pursue 007 to the east
toward the SG-1 Zone, another Shoreline Basalt deposit located 2 km
northeast of the 007 Zone. The region between 007 and SG-1 has yet
to be significantly drill tested.
The drilling released today covers 261 intercepts over 215 drill
holes within the 007 mineralized envelop. 17 of these holes have
been released previously and are included here to provide a
complete summary of the 007 drilling program in 2011. The full
listing of the drill holes can be found in Table 1 of this release.
Figures 1 to 5, which illustrate the location of drill holes and
intercepts, can be found on the company web site (www.sangold.ca)
and on SEDAR (www.sedar.com).
2011 Exploration Program
This drilling was carried out as part of San Gold's 2011 drill
program. As of the end of October, the company had completed
300,000 metres of drilling within the Rice Lake Mining Complex. The
Company's near-surface exploration activities in 2011 have focused
on both exploration and definition drilling along the 007 Zone and
within the L10, L13, SG-1 and Cohiba zones. Deep drilling has
focused on extensions of the L10 and 007 zones, both from surface
and from drilling stations on 16 Level and 26 Level in the Rice
Lake Mine. Drilling within the Rice Lake Mine has focused primarily
on definition drilling on 26, 28 and 31 Levels.
The surface drill program was carried out under the supervision
of W.S. Ferreira, P.Geo., the Qualified Person for this project
under National Instrument 43-101. The drill core was split, with
half sent to TSL Laboratories in Saskatoon, SK and fire assayed
with an AA and gravimetric finish. Whole metallic assays were
performed on samples containing visible gold. Check assays were
also performed on pulps and rejects by both TSL and by Accurassay
Laboratories of Thunder Bay, ON. The underground drill program was
carried out by San Gold mine geologists under the supervision of D.
Ginn, P.Geo., the Qualified Person for San Gold under National
Instrument 43-101. Underground drill core samples are assayed on
site in the company's assay lab using the fire assay method with an
AA and gravimetric finish. San Gold's quality control and assurance
program includes the insertion of standards, the retention of pulps
and rejects, and spot checks utilizing independent labs including
TSL Laboratories in Saskatoon, SK and Accurassay Laboratories of
Thunder Bay, ON. The core lengths are actual lengths as drilled and
have not been adjusted for the true width of the mineralized
zones.
About San Gold
San Gold is an established Canadian gold producer, explorer, and
developer that owns and operates the Hinge, 007, and Rice Lake
mines near Bissett, Manitoba. The Company employs more than 400
people and is committed to the highest standards of safety and
environmental stewardship. San Gold is on the Toronto Stock
Exchange under the symbol "SGR" and on the OTCQX under the symbol
"SGRCF".
Cautionary Note
No stock exchange, securities commission or other regulatory
authority has approved or disapproved the information contained
herein. This news release includes certain "forward-looking
statements". All statements, other than statements of historical
fact included in this release, including, without limitation,
statements regarding forecast gold production, gold grades,
recoveries, cash operating costs, potential mineralization, mineral
resources, mineral reserves, exploration results, and future plans
and objectives of the Company, are forward-looking statements that
involve various risks and uncertainties. These forward-looking
statements include, but are not limited to, statements with respect
to mining and processing of mined ore, achieving projected recovery
rates, anticipated production rates and mine life, operating
efficiencies, costs and expenditures, changes in mineral resources
and conversion of mineral resources to proven and probable mineral
reserves, and other information that is based on forecasts of
future operational or financial results, estimates of amounts not
yet determinable and assumptions of management.
Any statements that express or involve discussions with respect
to predictions, expectations, beliefs, plans, projections,
objectives, assumptions or future events or performance (often, but
not always, using words or phrases such as "expects" or "does not
expect", "is expected", "anticipates" or "does not anticipate",
"plans", "estimates" or "intends", or stating that certain actions,
events or results "may", "could", "would", "might" or "will" be
taken, occur or be achieved) are not statements of historical fact
and may be "forward-looking statements." Forward-looking statements
are subject to a variety of risks and uncertainties that could
cause actual events or results to differ from those reflected in
the forward-looking statements.
There can be no assurance that forward-looking statements will
prove to be accurate and actual results and future events could
differ materially from those anticipated in such statements.
Important factors that could cause actual results to differ
materially from the Company's expectations include, among others,
the actual results of current exploration activities, conclusions
of economic evaluations and changes in project parameters as plans
continue to be refined as well as future prices of precious metals,
as well as those factors discussed in the section entitled "Other
MD&A Requirements and Additional Disclosure and Risk Factors"
in the Company's most recent quarterly Management's Analysis and
Discussion ("MD&A"). Although the Company has attempted to
identify important factors that could cause actual results to
differ materially, there may be other factors that cause results
not to be as anticipated, estimated or intended. There can be no
assurance that such statements will prove to be accurate as actual
results and future events could differ materially from those
anticipated in such statements. Accordingly, readers should not
place undue reliance on forward-looking statements.
Exploration results that include geophysics, sampling, and drill
results on wide spacings may not be indicative of the occurrence of
a mineral deposit. Such results do not provide assurance that
further work will establish sufficient grade, continuity,
metallurgical characteristics, and economic potential to be classed
as a category of mineral resource. A mineral resource that is
classified as "inferred" or "indicated" has a great amount of
uncertainty as to its existence and economic and legal feasibility.
It cannot be assumed that any or part of an "indicated mineral
resource" or "inferred mineral resource" will ever be upgraded to a
higher category of resource. Investors are cautioned not to assume
that all or any part of mineral deposits in these categories will
ever be converted into proven and probable reserves.
Table 1: Full Listing of 007 Drilling Results (January-October 2011) (1)
----------------------------------------------------------------------------
Depth From To Length Au
----------------------------------------------------------------------------
Drill Hole metres g/tonne
----------------------------------------------------------------------------
----------------------------------------------------------------------------
Drilling Station 007-S915 UG
----------------------------------------------------------------------------
S915-11-001 200.3 65.7 66.0 0.3 3.2
----------------------------------------------------------------------------
S915-11-002 197.0 88.7 89.4 0.6 0.0
----------------------------------------------------------------------------
S915-11-003 395.9 157.6 169.9 12.3 11.8
----------------------------------------------------------------------------
S915-11-004 228.0 59.6 60.1 0.5 2.2
----------------------------------------------------------------------------
S915-11-006 280.9 75.6 76.5 0.9 0.3
----------------------------------------------------------------------------
S915-11-007 296.1 78.9 82.0 3.1 17.8
----------------------------------------------------------------------------
and 55.3 62.5 7.3 2.0
----------------------------------------------------------------------------
S915-11-008 314.6 96.3 120.2 23.9 1.3
----------------------------------------------------------------------------
incl 117.8 120.2 2.4 3.9
----------------------------------------------------------------------------
and 59.3 71.3 12.0 4.3
----------------------------------------------------------------------------
S915-11-009 207.3 55.3 61.0 5.7 4.3
----------------------------------------------------------------------------
incl 55.3 56.1 0.8 7.5
----------------------------------------------------------------------------
incl 58.6 59.0 0.3 29.1
----------------------------------------------------------------------------
S915-11-010 217.3 46.0 58.2 12.2 5.1
----------------------------------------------------------------------------
incl 50.0 56.4 6.4 9.0
----------------------------------------------------------------------------
S915-11-011 33.7 37.1 3.4 2.2
----------------------------------------------------------------------------
incl 34.1 34.9 0.8 7.4
----------------------------------------------------------------------------
incl 36.8 37.1 0.3 3.6
----------------------------------------------------------------------------
and 226.6 42.0 55.2 13.2 11.6
----------------------------------------------------------------------------
incl 49.5 55.2 5.7 24.5
----------------------------------------------------------------------------
S915-11-013 243.4 33.4 43.8 10.4 7.6
----------------------------------------------------------------------------
incl 33.8 43.8 10.0 7.2
----------------------------------------------------------------------------
incl 43.2 43.8 0.6 67.2
----------------------------------------------------------------------------
S915-11-014 278.3 50.7 63.2 12.5 11.6
----------------------------------------------------------------------------
incl 54.7 56.4 1.7 58.9
----------------------------------------------------------------------------
S915-11-015 293.2 69.4 74.6 5.2 2.2
----------------------------------------------------------------------------
S915-11-016 304.5 76.2 84.2 8.0 15.3
----------------------------------------------------------------------------
S915-11-017 331.6 99.3 103.1 3.8 8.0
----------------------------------------------------------------------------
and 345.6 115.6 124.7 9.1 13.1
----------------------------------------------------------------------------
S915-11-019 211.8 48.6 51.8 3.2 3.8
----------------------------------------------------------------------------
S915-11-020 221.6 44.3 46.8 2.4 4.9
----------------------------------------------------------------------------
S915-11-022 242.6 41.4 43.4 2.1 4.5
----------------------------------------------------------------------------
S915-11-023 No Significant
Results
----------------------------------------------------------------------------
S915-11-024 274.5 50.0 52.9 3.0 60.7
----------------------------------------------------------------------------
S915-11-026 289.9 56.8 60.2 3.4 7.1
----------------------------------------------------------------------------
S915-11-027 313.3 75.1 78.9 3.8 4.6
----------------------------------------------------------------------------
and 322.8 87.8 91.6 3.8 6.0
----------------------------------------------------------------------------
S915-11-028 52.1 52.4 0.4 3.6
----------------------------------------------------------------------------
and 203.3 62.0 63.2 1.2 0.9
----------------------------------------------------------------------------
S915-11-030 33.2 37.8 4.6 7.2
----------------------------------------------------------------------------
incl 37.3 37.8 0.5 57.6
----------------------------------------------------------------------------
and 42.7 43.9 1.2 4.7
----------------------------------------------------------------------------
and 224.5 47.3 51.2 3.8 58.3
----------------------------------------------------------------------------
incl 49.0 49.3 0.3 607.4
----------------------------------------------------------------------------
S915-11-032 34.1 36.2 2.1 4.3
----------------------------------------------------------------------------
and 243.5 39.2 45.7 6.5 6.2
----------------------------------------------------------------------------
incl 39.2 40.7 1.5 17.5
----------------------------------------------------------------------------
S915-11-033 258.5 128.4 130.3 1.9 72.7
----------------------------------------------------------------------------
incl 128.4 128.9 0.5 282.1
----------------------------------------------------------------------------
and 257.7 133.4 142.1 8.7 7.9
----------------------------------------------------------------------------
incl 133.4 137.3 3.9 3.8
----------------------------------------------------------------------------
incl 135.7 137.3 1.6 7.0
----------------------------------------------------------------------------
incl 138.8 142.1 3.3 16.5
----------------------------------------------------------------------------
incl 138.8 140.5 1.7 30.0
----------------------------------------------------------------------------
and 149.5 150.5 1.0 4.9
----------------------------------------------------------------------------
S915-11-034 272.5 39.0 50.3 11.3 11.5
----------------------------------------------------------------------------
S915-11-035 291.9 57.0 62.6 5.6 7.6
----------------------------------------------------------------------------
S915-11-037 316.5 79.7 84.1 4.4 5.9
----------------------------------------------------------------------------
S915-11-038 42.4 45.2 2.8 3.1
----------------------------------------------------------------------------
incl 44.6 45.2 0.6 8.7
----------------------------------------------------------------------------
and 203.7 56.3 67.1 10.8 13.2
----------------------------------------------------------------------------
incl 57.5 58.1 0.6 31.4
----------------------------------------------------------------------------
incl 63.1 65.3 2.2 42.1
----------------------------------------------------------------------------
S915-11-040 226.4 41.1 49.5 8.4 14.3
----------------------------------------------------------------------------
incl 47.8 49.0 1.2 93.7
----------------------------------------------------------------------------
S915-11-042 240.5 41.6 44.4 2.8 33.6
----------------------------------------------------------------------------
S915-11-043 275.3 45.4 52.8 7.4 14.8
----------------------------------------------------------------------------
S915-11-045 290.8 56.9 61.2 4.3 45.6
----------------------------------------------------------------------------
S915-11-047 317.0 78.3 89.8 11.5 9.5
----------------------------------------------------------------------------
incl 79.7 87.4 7.7 11.6
----------------------------------------------------------------------------
S915-11-048 55.0 56.2 1.2 8.0
----------------------------------------------------------------------------
and 197.4 66.8 72.1 5.3 80.4
----------------------------------------------------------------------------
incl 66.9 70.3 3.4 119.9
----------------------------------------------------------------------------
S915-11-050 16.2 18.1 1.9 4.6
----------------------------------------------------------------------------
and 223.4 52.2 57.0 4.8 43.5
----------------------------------------------------------------------------
incl 55.6 57.0 1.4 144.2
----------------------------------------------------------------------------
S915-11-052 241.5 47.0 52.2 5.2 2.7
----------------------------------------------------------------------------
incl 47.0 47.5 0.5 8.6
----------------------------------------------------------------------------
and 240.2 54.2 54.8 0.6 13.4
----------------------------------------------------------------------------
S915-11-054 274.7 57.8 60.0 2.2 6.3
----------------------------------------------------------------------------
S915-11-055 320.6 111.9 114.4 2.5 6.3
----------------------------------------------------------------------------
S915-11-056 372.5 169.3 170.6 1.3 3.7
----------------------------------------------------------------------------
S915-11-057 233.5 151.0 155.8 4.8 7.7
----------------------------------------------------------------------------
S915-11-058 221.0 86.1 86.5 0.3 59.3
----------------------------------------------------------------------------
S915-11-059 240.9 62.5 62.5 0.0 0.0
----------------------------------------------------------------------------
and 93.5 94.5 1.0 7.1
----------------------------------------------------------------------------
S915-11-060 248.7 94.9 95.1 0.2 0.0
----------------------------------------------------------------------------
S915-11-061 262.2 66.8 67.5 0.7 0.0
----------------------------------------------------------------------------
S915-11-062 275.6 111.6 121.9 10.3 17.0
----------------------------------------------------------------------------
incl 115.0 118.2 3.2 42.2
----------------------------------------------------------------------------
S915-11-063 No Significant
Results
----------------------------------------------------------------------------
S915-11-065 No Significant
Results
----------------------------------------------------------------------------
S915-11-064 228.3 41.3 41.9 0.6 0.2
----------------------------------------------------------------------------
----------------------------------------------------------------------------
S915-11-066 217.0 51.9 54.3 2.3 0.3
----------------------------------------------------------------------------
S915-11-067 227.6 44.2 49.0 4.7 1.6
----------------------------------------------------------------------------
S915-11-068 202.2 61.6 64.5 2.9 4.4
----------------------------------------------------------------------------
S915-11-069 226.9 37.9 41.6 3.7 0.7
----------------------------------------------------------------------------
and 219.2 52.0 53.4 1.5 3.5
----------------------------------------------------------------------------
S915-11-070 230.8 35.8 36.6 0.7 0.0
----------------------------------------------------------------------------
S915-11-071 210.0 49.5 51.7 2.3 3.4
----------------------------------------------------------------------------
S915-11-072 228.0 32.8 33.2 0.4 41.7
----------------------------------------------------------------------------
S915-11-073 229.2 44.0 47.4 3.5 0.4
----------------------------------------------------------------------------
S915-11-074 208.2 50.0 52.9 2.8 3.9
----------------------------------------------------------------------------
S915-11-075 213.7 52.0 53.8 1.8 3.8
----------------------------------------------------------------------------
S915-11-076 245.4 12.5 13.9 1.4 4.1
----------------------------------------------------------------------------
and 230.7 40.7 41.6 1.0 1.3
----------------------------------------------------------------------------
S915-11-077 235.1 35.7 41.1 5.5 2.0
----------------------------------------------------------------------------
incl 35.7 37.8 2.1 3.6
----------------------------------------------------------------------------
S915-11-078 263.7 40.3 45.0 4.7 2.5
----------------------------------------------------------------------------
and 269.1 64.2 65.7 1.6 2.6
----------------------------------------------------------------------------
S915-11-079 No Significant
Results 0.0
----------------------------------------------------------------------------
S915-11-080 207.9 68.5 73.5 4.9 3.2
----------------------------------------------------------------------------
incl 69.9 72.8 2.9 5.2
----------------------------------------------------------------------------
and 224.5 41.8 44.9 3.2 2.3
----------------------------------------------------------------------------
S915-11-081 235.3 52.7 55.4 2.8 1.8
----------------------------------------------------------------------------
S915-11-082 265.2 49.7 50.7 1.0 2.8
----------------------------------------------------------------------------
S915-11-083 285.6 68.6 69.6 1.0 0.0
----------------------------------------------------------------------------
S915-11-084 268.6 48.4 57.9 9.4 17.4
----------------------------------------------------------------------------
incl 48.4 52.1 3.7 35.6
----------------------------------------------------------------------------
incl 54.3 56.7 2.5 12.9
----------------------------------------------------------------------------
and 272.1 62.6 67.8 5.2 33.7
----------------------------------------------------------------------------
S915-11-085 No Significant
Results
----------------------------------------------------------------------------
S915-11-086 No Significant
Results
----------------------------------------------------------------------------
S915-11-087 No Significant
Results
----------------------------------------------------------------------------
S915-11-088 No Significant
Results
----------------------------------------------------------------------------
S915-11-089 250.5 6.8 9.0 2.2 0.3
----------------------------------------------------------------------------
S915-11-090 No Significant
Results
----------------------------------------------------------------------------
S915-11-091 250.5 27.6 30.1 2.5 0.3
----------------------------------------------------------------------------
S915-11-092 262.9 33.9 35.2 1.3 36.2
----------------------------------------------------------------------------
and 267.4 50.3 50.5 0.3 17.7
----------------------------------------------------------------------------
S915-11-093 261.5 30.0 30.7 0.7 34.0
----------------------------------------------------------------------------
and 263.7 36.1 37.6 1.5 3.9
----------------------------------------------------------------------------
and 266.7 45.7 46.7 1.0 51.7
----------------------------------------------------------------------------
S915-11-094 260.6 24.2 27.4 3.3 7.7
----------------------------------------------------------------------------
and 267.0 39.4 47.7 8.2 58.4
----------------------------------------------------------------------------
incl 43.9 47.7 3.7 124.8
----------------------------------------------------------------------------
S915-11-100 330.1 130.5 131.4 0.9 0.3
----------------------------------------------------------------------------
S915-11-102 193.5 75.4 77.1 1.6 1.8
----------------------------------------------------------------------------
S915-11-105 339.5 108.7 113.4 4.7 20.3
----------------------------------------------------------------------------
S915-11-106 357.5 124.2 127.4 3.2 18.1
----------------------------------------------------------------------------
S915-11-107 345.9 106.8 111.7 4.9 29.2
----------------------------------------------------------------------------
S915-11-108 347.2 103.2 110.2 7.0 9.2
----------------------------------------------------------------------------
S915-11-109 351.7 110.1 112.0 1.9 1.7
----------------------------------------------------------------------------
S915-11-110 373.1 134.8 136.7 1.9 15.7
----------------------------------------------------------------------------
Drilling Station 007-S922 UG
----------------------------------------------------------------------------
S922-11-001 300.8 126.5 128.4 1.9 0.1
----------------------------------------------------------------------------
S922-11-002 312.3 118.7 119.9 1.3 48.6
----------------------------------------------------------------------------
S922-11-003 328.8 121.0 122.8 1.7 16.3
----------------------------------------------------------------------------
S922-11-004 300.2 114.7 117.0 2.3 7.6
----------------------------------------------------------------------------
S922-11-005 315.2 115.1 117.3 2.2 1.7
----------------------------------------------------------------------------
S922-11-007 297.5 117.0 118.8 1.8 1.4
----------------------------------------------------------------------------
S922-11-008 308.5 116.0 118.9 2.8 0.8
----------------------------------------------------------------------------
S922-11-009 324.0 117.5 120.1 2.6 1.6
----------------------------------------------------------------------------
S922-11-010 300.8 110.2 112.3 2.1 0.3
----------------------------------------------------------------------------
S922-11-011 312.7 109.9 113.3 3.4 4.0
----------------------------------------------------------------------------
S922-11-012 311.2 112.0 112.7 0.7 7.1
----------------------------------------------------------------------------
S922-11-013 329.8 117.0 119.1 2.1 110.1
----------------------------------------------------------------------------
S922-11-014 298.1 115.3 116.6 1.3 12.2
----------------------------------------------------------------------------
S922-11-015 321.6 111.7 114.8 3.2 3.1
----------------------------------------------------------------------------
S922-11-016 310.9 120.8 129.4 8.6 0.6
----------------------------------------------------------------------------
S922-11-017 333.1 128.9 132.3 3.5 4.0
----------------------------------------------------------------------------
S922-11-018 300.5 137.9 139.4 1.5 0.2
----------------------------------------------------------------------------
S922-11-019 311.2 122.8 127.0 4.3 2.3
----------------------------------------------------------------------------
S922-11-020 321.4 118.3 120.5 2.2 1.5
----------------------------------------------------------------------------
S922-11-021 290.6 144.8 145.6 0.8 6.1
----------------------------------------------------------------------------
and 296.6 160.4 161.1 0.7 24.8
----------------------------------------------------------------------------
S922-11-022 321.2 157.2 159.9 2.7 4.8
----------------------------------------------------------------------------
S922-11-023 331.9 148.9 153.0 4.1 2.3
----------------------------------------------------------------------------
incl 151.6 152.8 1.1 6.1
----------------------------------------------------------------------------
S922-11-024 295.1 147.2 151.3 4.1 4.7
----------------------------------------------------------------------------
S922-11-025 315.8 155.0 157.0 2.0 5.7
----------------------------------------------------------------------------
S922-11-026 331.9 180.9 189.3 8.5 4.2
----------------------------------------------------------------------------
incl 180.9 181.6 0.8 11.6
----------------------------------------------------------------------------
incl 184.6 185.8 1.2 16.4
----------------------------------------------------------------------------
S922-11-029 327.2 178.6 183.1 4.5 5.5
----------------------------------------------------------------------------
S922-11-030 349.8 131.2 134.0 2.8 8.2
----------------------------------------------------------------------------
incl 131.2 131.5 0.3 62.3
----------------------------------------------------------------------------
S922-11-034 57.6 57.8 0.2 12.0
----------------------------------------------------------------------------
and 124.1 126.9 2.8 1.3
----------------------------------------------------------------------------
S922-11-035 338.6 119.7 122.6 2.9 11.4
----------------------------------------------------------------------------
S922-11-036 362.4 132.3 143.8 11.5 23.2
----------------------------------------------------------------------------
incl 132.3 140.0 7.7 33.0
----------------------------------------------------------------------------
S922-11-038 290.2 157.5 158.5 1.0 2.6
----------------------------------------------------------------------------
and 170.0 170.7 0.6 5.5
----------------------------------------------------------------------------
S922-11-039 326.7 154.0 154.3 0.3 1.0
----------------------------------------------------------------------------
and 329.4 158.9 159.6 0.7 0.9
----------------------------------------------------------------------------
S922-11-040 136.7 137.3 0.7 3.6
----------------------------------------------------------------------------
and 343.0 146.2 149.9 3.7 6.9
----------------------------------------------------------------------------
incl 146.9 149.9 3.0 8.7
----------------------------------------------------------------------------
S922-11-042 343.0 154.5 154.6 0.0 0.0
----------------------------------------------------------------------------
and 175.0 178.5 3.5 2.7
----------------------------------------------------------------------------
and 175.0 175.6 0.6 6.9
----------------------------------------------------------------------------
and 176.9 177.5 0.7 3.9
----------------------------------------------------------------------------
S922-11-043 282.2 171.0 176.9 5.9 9.2
----------------------------------------------------------------------------
S922-11-044 301.8 148.4 151.6 3.2 5.2
----------------------------------------------------------------------------
S922-11-045 333.1 156.0 157.3 1.3 4.6
----------------------------------------------------------------------------
S922-11-046 343.5 150.9 157.5 6.6 1.3
----------------------------------------------------------------------------
S922-11-047 351.1 133.2 134.1 0.9 185.3
----------------------------------------------------------------------------
and 362.5 144.8 148.5 3.7 11.4
----------------------------------------------------------------------------
S922-11-048 372.5 147.5 148.6 1.2 1.1
----------------------------------------------------------------------------
S922-11-049 348.1 132.6 136.8 4.3 44.2
----------------------------------------------------------------------------
S922-11-050 364.5 144.4 144.6 0.2 0.1
----------------------------------------------------------------------------
S922-11-051 358.7 143.5 146.2 2.7 11.1
----------------------------------------------------------------------------
S922-11-052 349.9 148.0 149.2 1.2 0.6
----------------------------------------------------------------------------
S922-10-054 250.2 147.5 151.1 3.6 8.6
----------------------------------------------------------------------------
incl 148.2 150.4 2.2 10.5
----------------------------------------------------------------------------
S922-11-055 351.7 138.0 140.8 2.8 3.2
----------------------------------------------------------------------------
S922-11-057 293.8 107.5 110.8 3.3 3.7
----------------------------------------------------------------------------
S922-11-058 211.5 198.6 200.1 1.5 23.9
----------------------------------------------------------------------------
incl 199.2 199.4 0.2 159.4
----------------------------------------------------------------------------
S922-11-061 344.4 125.9 129.0 3.1 28.6
----------------------------------------------------------------------------
S922-11-062 321.9 131.7 133.0 1.3 3.9
----------------------------------------------------------------------------
S922-11-064 341.1 136.2 142.0 5.8 1.1
----------------------------------------------------------------------------
S922-11-065 358.4 139.0 141.6 2.6 3.3
----------------------------------------------------------------------------
incl 175.9 176.6 0.7 161.6
----------------------------------------------------------------------------
S922-11-072 279.2 175.5 177.8 2.3 5.9
----------------------------------------------------------------------------
S922-11-076 305.5 146.1 147.1 1.0 5.2
----------------------------------------------------------------------------
incl 146.4 146.7 0.3 8.5
----------------------------------------------------------------------------
and 309.3 155.4 156.4 1.0 4.0
----------------------------------------------------------------------------
incl 155.4 155.7 0.3 11.6
----------------------------------------------------------------------------
S922-11-078 231.3 174.5 177.5 3.0 20.5
----------------------------------------------------------------------------
S922-11-079 378.6 161.9 164.4 2.5 6.8
----------------------------------------------------------------------------
S922-11-080 322.3 117.5 118.0 0.4 0.2
----------------------------------------------------------------------------
S922-11-081 323.7 106.9 109.7 2.8 0.1
----------------------------------------------------------------------------
S922-11-082 361.8 136.5 138.0 1.6 24.1
----------------------------------------------------------------------------
S922-11-084 373.4 143.1 144.3 1.1 13.0
----------------------------------------------------------------------------
and 384.4 154.7 156.7 2.0 5.9
----------------------------------------------------------------------------
S922-11-085 350.5 130.1 132.1 2.0 10.2
----------------------------------------------------------------------------
incl 350.0 130.1 131.0 0.9 22.4
----------------------------------------------------------------------------
S922-11-086 381.0 150.5 152.1 1.6 7.3
----------------------------------------------------------------------------
and 392.6 161.6 164.2 2.6 0.2
----------------------------------------------------------------------------
S922-11-087 272.8 48.5 51.5 3.0 3.9
----------------------------------------------------------------------------
and 327.7 119.5 122.2 2.7 0.4
----------------------------------------------------------------------------
S922-11-088 345.8 126.8 130.3 3.5 7.2
----------------------------------------------------------------------------
S922-11-089 361.6 136.7 139.4 2.8 63.0
----------------------------------------------------------------------------
incl 136.7 137.4 0.7 240.5
----------------------------------------------------------------------------
and 365.8 142.0 143.6 1.6 10.5
----------------------------------------------------------------------------
incl 142.9 143.6 0.7 22.4
----------------------------------------------------------------------------
and 369.8 146.5 148.0 1.5 5.5
----------------------------------------------------------------------------
incl 146.5 146.9 0.4 17.5
----------------------------------------------------------------------------
S922-11-090 347.5 124.5 128.0 3.5 1.8
----------------------------------------------------------------------------
S922-11-091 362.2 135.6 143.0 7.4 21.7
----------------------------------------------------------------------------
incl 135.6 137.9 2.3 18.3
----------------------------------------------------------------------------
incl 139.9 141.8 2.0 59.2
----------------------------------------------------------------------------
S922-11-092 374.9 143.0 153.2 10.2 1.9
----------------------------------------------------------------------------
incl 143.4 147.1 3.7 4.5
----------------------------------------------------------------------------
S922-11-093 371.4 140.9 145.3 4.4 14.6
----------------------------------------------------------------------------
and 378.9 149.9 152.4 2.5 3.2
----------------------------------------------------------------------------
S922-11-094 404.5 174.5 177.3 2.8 2.1
----------------------------------------------------------------------------
S922-11-095 381.5 147.0 149.0 2.0 0.8
----------------------------------------------------------------------------
S922-11-096 359.4 134.8 137.3 2.5 23.6
----------------------------------------------------------------------------
S922-11-097 375.2 144.2 149.5 5.3 19.5
----------------------------------------------------------------------------
and 383.7 154.8 157.8 3.0 7.6
----------------------------------------------------------------------------
S922-11-098 305.8 144.2 148.3 4.1 4.1
----------------------------------------------------------------------------
S922-11-099 311.2 138.2 139.6 1.5 4.0
----------------------------------------------------------------------------
and 314.9 144.6 146.6 2.0 4.8
----------------------------------------------------------------------------
S922-11-100 334.4 135.5 139.7 4.1 1.8
----------------------------------------------------------------------------
S922-11-101 349.3 139.2 143.3 4.0 13.0
----------------------------------------------------------------------------
S922-11-102 365.4 141.5 146.4 4.9 1.3
----------------------------------------------------------------------------
S922-11-103 336.2 135.1 139.6 4.5 7.3
----------------------------------------------------------------------------
S922-11-104 352.3 136.3 138.5 2.2 2.4
----------------------------------------------------------------------------
Drilling Station Surface DDH 007
----------------------------------------------------------------------------
CD-11-162 No Significant
Results 0.0
----------------------------------------------------------------------------
CD-11-165 No Significant
Results 0.0
----------------------------------------------------------------------------
CD-11-166 No Significant
Results 0.0
----------------------------------------------------------------------------
CD-11-169 269.1 279.5 284.8 5.3 0.9
----------------------------------------------------------------------------
and 281.1 293.8 295.5 1.7 10.7
----------------------------------------------------------------------------
incl 293.8 294.7 0.9 18.4
----------------------------------------------------------------------------
CD-11-200 144.8 199.5 205.1 5.6 0.0
----------------------------------------------------------------------------
CD-11-202 205.1 223.8 233.9 10.1 0.5
----------------------------------------------------------------------------
incl 230.7 231.3 0.6 5.3
----------------------------------------------------------------------------
CD-11-204 196.8 217.8 218.0 0.2 0.1
----------------------------------------------------------------------------
CD-11-205 199.9 222.6 223.7 1.1 5.5
----------------------------------------------------------------------------
CD-11-206 225.6 242.1 243.0 0.9 7.0
----------------------------------------------------------------------------
incl 242.7 243.0 0.3 17.1
----------------------------------------------------------------------------
CD-11-207 184.7 221.6 225.0 3.4 0.6
----------------------------------------------------------------------------
incl 224.6 225.0 0.5 4.4
----------------------------------------------------------------------------
CD-11-208 172.2 222.9 224.5 1.6 0.6
----------------------------------------------------------------------------
CD-11-209 178.3 217.9 218.1 0.2 2.4
----------------------------------------------------------------------------
CD-11-210 173.7 218.5 219.3 0.7 1.9
----------------------------------------------------------------------------
CD-11-211 156.7 213.8 215.6 1.9 0.0
----------------------------------------------------------------------------
CD-11-212 151.8 195.2 195.7 0.5 10.8
----------------------------------------------------------------------------
CD-11-217 162.5 205.8 206.9 1.1 11.1
----------------------------------------------------------------------------
CD-11-218 149.7 198.2 200.5 2.2 3.7
----------------------------------------------------------------------------
CD-11-222 147.9 196.1 198.5 2.3 0.3
----------------------------------------------------------------------------
CD-11-223 142.6 196.2 197.8 1.6 0.5
----------------------------------------------------------------------------
CD-11-227 No Significant
Results
----------------------------------------------------------------------------
CD-11-228 184.1 218.0 221.7 3.7 4.6
----------------------------------------------------------------------------
CD-11-232 178.9 215.6 216.6 0.9 0.5
----------------------------------------------------------------------------
CD-11-230 218.2 235.8 239.1 3.3 2.2
----------------------------------------------------------------------------
CD-11-233 200.9 218.5 219.5 0.9 0.1
----------------------------------------------------------------------------
CD-11-234 202.4 225.1 225.3 0.2 2.4
----------------------------------------------------------------------------
CD-11-235 188.7 213.8 214.2 0.4 0.4
----------------------------------------------------------------------------
CD-11-236 172.2 203.9 204.5 0.6 9.8
----------------------------------------------------------------------------
CD-11-238 121.6 136.8 142.2 5.4 0.0
----------------------------------------------------------------------------
CD-11-241 227.1 242.7 249.6 6.9 7.9
----------------------------------------------------------------------------
and 261.5 280.5 283.8 3.3 10.6
----------------------------------------------------------------------------
CD-11-242 192.9 216.1 218.7 2.6 0.9
----------------------------------------------------------------------------
CD-11-244 112.7 137.8 139.3 1.5 0.4
----------------------------------------------------------------------------
CD-11-245 236.5 259.1 260.3 1.2 5.2
----------------------------------------------------------------------------
CD-11-246 239.0 265.6 266.9 1.3 4.3
----------------------------------------------------------------------------
CD-11-248 157.0 188.1 191.4 3.3 0.2
----------------------------------------------------------------------------
CD-11-250 157.9 198.0 201.0 3.0 1.1
----------------------------------------------------------------------------
CD-11-251 138.7 187.1 190.7 3.5 1.1
----------------------------------------------------------------------------
CD-11-252 139.9 206.6 209.7 3.1 0.0
----------------------------------------------------------------------------
CD-11-253 121.7 199.5 202.4 2.9 4.6
----------------------------------------------------------------------------
incl 120.9 199.5 199.7 0.2 45.3
----------------------------------------------------------------------------
CD-11-254 152.9 202.7 205.0 2.3 0.3
----------------------------------------------------------------------------
CD-11-255 133.5 187.1 189.5 2.4 0.0
----------------------------------------------------------------------------
CD-11-257 119.5 199.6 202.5 3.0 8.2
----------------------------------------------------------------------------
incl 199.6 199.8 0.2 120.4
----------------------------------------------------------------------------
CD-11-259 127.4 189.4 190.8 1.4 10.9
----------------------------------------------------------------------------
CD-11-262 320.8 336.9 345.6 8.7 3.8
----------------------------------------------------------------------------
incl 339.2 343.0 3.8 7.4
----------------------------------------------------------------------------
JH-11-019 361.7 472.4 474.9 2.5 20.3
----------------------------------------------------------------------------
JH-11-026 326.1 456.6 458.0 1.4 7.6
----------------------------------------------------------------------------
JH-11-028 370.9 473.1 475.7 2.6 18.6
----------------------------------------------------------------------------
and 374.9 478.8 480.3 1.6 2.3
----------------------------------------------------------------------------
JH-11-030 394.3 522.9 525.0 2.2 2.2
----------------------------------------------------------------------------
JH-11-055 435.0 521.9 526.4 4.5 5.1
----------------------------------------------------------------------------
(1) Due to the exploratory nature of this exploration program and the
variable orientations of the high-grade mineralized zones, the intersections
presented herein may not necessarily represent the true width of
mineralization.
To view Figure 1, please visit the following link:
http://media3.marketwire.com/docs/Figure_1-3D_view_west800.pdf.
To view Figure 2, please visit the following link:
http://media3.marketwire.com/docs/Figure%202-007%20Long%20Section-3.pdf.
To view Figure 3, please visit the following link:
http://media3.marketwire.com/docs/Figure_3-16_Level_Plan_View.pdf.
To view Figure 4, please visit the following link:
http://media3.marketwire.com/docs/Figure_4-3D_view_south800.pdf.
To view Figure 5, please visit the following link:
http://media3.marketwire.com/docs/Figure_5-3D_view_all800.pdf.
The TSX and the OTCQX exchanges have not reviewed and do not
accept responsibility for the adequacy or accuracy of this
release.
Contacts: San Gold Corporation Tim Friesen Communications
Director 1 (204) 772-9149 ext. 202 San Gold Corporation George
Pirie President and CEO 1 (416) 214-0024www.sangold.ca
San Gold (CE) (USOTC:SGRCF)
Historical Stock Chart
From Apr 2024 to May 2024
San Gold (CE) (USOTC:SGRCF)
Historical Stock Chart
From May 2023 to May 2024
