false2020FY--06-27000071973310,759,68056.760958——25,00025,00010,76010,76010,76010,760330110354.407.907.919.919.9211.344.4011.34354700007197332019-06-302020-06-27iso4217:USD00007197332019-12-28xbrli:shares00007197332020-09-0400007197332020-06-2700007197332019-06-29iso4217:USDxbrli:shares00007197332018-07-012019-06-2900007197332017-07-022018-06-3000007197332018-06-3000007197332017-07-010000719733us-gaap:CommonStockMember2017-07-010000719733us-gaap:RetainedEarningsMember2017-07-010000719733us-gaap:AccumulatedOtherComprehensiveIncomeMember2017-07-010000719733us-gaap:RetainedEarningsMember2017-07-022018-06-300000719733us-gaap:AccumulatedOtherComprehensiveIncomeMember2017-07-022018-06-300000719733us-gaap:CommonStockMember2017-07-022018-06-300000719733us-gaap:CommonStockMember2018-06-300000719733us-gaap:RetainedEarningsMember2018-06-300000719733us-gaap:AccumulatedOtherComprehensiveIncomeMember2018-06-300000719733us-gaap:RetainedEarningsMember2018-07-012019-06-290000719733us-gaap:AccumulatedOtherComprehensiveIncomeMember2018-07-012019-06-290000719733us-gaap:CommonStockMember2018-07-012019-06-290000719733us-gaap:CommonStockMember2019-06-290000719733us-gaap:RetainedEarningsMember2019-06-290000719733us-gaap:AccumulatedOtherComprehensiveIncomeMember2019-06-290000719733us-gaap:RetainedEarningsMember2019-06-302020-06-270000719733us-gaap:AccumulatedOtherComprehensiveIncomeMember2019-06-302020-06-270000719733us-gaap:CommonStockMember2019-06-302020-06-270000719733us-gaap:CommonStockMember2020-06-270000719733us-gaap:RetainedEarningsMember2020-06-270000719733us-gaap:AccumulatedOtherComprehensiveIncomeMember2020-06-27xbrli:pure0000719733us-gaap:LongTermDebtMember2020-06-270000719733us-gaap:LongTermDebtMember2019-06-290000719733ktcc:EquipmentTermLoanDomain2020-06-270000719733ktcc:EquipmentTermLoanDomain2019-06-290000719733us-gaap:DifferenceBetweenRevenueGuidanceInEffectBeforeAndAfterTopic606Member2018-07-0100007197332018-07-010000719733us-gaap:DifferenceBetweenRevenueGuidanceInEffectBeforeAndAfterTopic606Member2019-06-290000719733us-gaap:CalculatedUnderRevenueGuidanceInEffectBeforeTopic606Member2019-06-290000719733us-gaap:DifferenceBetweenRevenueGuidanceInEffectBeforeAndAfterTopic606Member2018-07-012019-06-290000719733us-gaap:CalculatedUnderRevenueGuidanceInEffectBeforeTopic606Member2018-07-012019-06-290000719733us-gaap:BuildingAndBuildingImprovementsMembersrt:MinimumMember2019-06-302020-06-270000719733us-gaap:BuildingAndBuildingImprovementsMembersrt:MaximumMember2019-06-302020-06-270000719733us-gaap:EquipmentMembersrt:MinimumMember2019-06-302020-06-270000719733us-gaap:EquipmentMembersrt:MaximumMember2019-06-302020-06-270000719733srt:MinimumMemberus-gaap:FurnitureAndFixturesMember2019-06-302020-06-270000719733srt:MaximumMemberus-gaap:FurnitureAndFixturesMember2019-06-302020-06-270000719733ktcc:WellsFargoBankMember2020-03-050000719733ktcc:WellsFargoBankMember2019-11-2000007197332019-09-0500007197332018-09-2900007197332020-03-292020-06-270000719733ktcc:EquipmentTermLoanDomain2016-12-280000719733ktcc:EquipmentTermLoanDomain2019-06-302020-06-270000719733ktcc:OneMonthLondonInterbankOfferedRateMemberus-gaap:LineOfCreditMember2020-03-292020-06-270000719733us-gaap:LineOfCreditMemberktcc:FederalFundsRateMember2020-03-292020-06-270000719733ktcc:FixedRateMemberktcc:DebtInstrumentBasisSpreadonVariableRateScenarioOneMemberus-gaap:LineOfCreditMember2020-03-292020-06-270000719733ktcc:FixedRateMemberus-gaap:LineOfCreditMemberktcc:DebtInstrumentBasisSpreadonVariableRateScenarioTwoMemberus-gaap:LineOfCreditMember2018-07-012019-06-290000719733ktcc:FixedRateMemberus-gaap:LineOfCreditMemberus-gaap:LineOfCreditMemberktcc:DebtInstrumentBasisSpreadonVariableRateScenarioThreeMember2020-03-292020-06-270000719733srt:MinimumMember2020-06-270000719733srt:MaximumMember2020-06-270000719733srt:MinimumMember2019-06-290000719733srt:MaximumMember2019-06-290000719733us-gaap:StockAppreciationRightsSARSMember2019-07-262019-07-270000719733us-gaap:StockAppreciationRightsSARSMember2018-07-262018-07-270000719733us-gaap:StockAppreciationRightsSARSMember2017-07-272017-07-280000719733us-gaap:StockAppreciationRightsSARSMember2017-07-0100007197332015-06-282016-07-020000719733us-gaap:StockAppreciationRightsSARSMember2017-07-022018-06-300000719733us-gaap:StockAppreciationRightsSARSMember2018-06-300000719733us-gaap:StockAppreciationRightsSARSMember2018-07-012019-06-290000719733us-gaap:StockAppreciationRightsSARSMember2019-06-290000719733us-gaap:StockAppreciationRightsSARSMember2020-06-270000719733us-gaap:StockAppreciationRightsSARSMember2019-06-302020-06-270000719733ktcc:RangeOneMember2020-06-270000719733ktcc:RangeOneMember2019-06-302020-06-270000719733ktcc:RangeTwoMember2020-06-270000719733ktcc:RangeTwoMember2019-06-302020-06-270000719733ktcc:RangeThreeMember2020-06-270000719733ktcc:RangeThreeMember2019-06-302020-06-270000719733ktcc:RangeFiveMember2020-06-270000719733ktcc:RangeFiveMember2019-06-302020-06-270000719733us-gaap:ForwardContractsMember2020-06-270000719733us-gaap:SubsequentEventMembercurrency:MXN2020-09-260000719733us-gaap:SubsequentEventMembercurrency:USD2020-09-260000719733us-gaap:SubsequentEventMember2020-09-260000719733us-gaap:SubsequentEventMembercurrency:MXN2020-12-260000719733us-gaap:SubsequentEventMembercurrency:USD2020-12-260000719733us-gaap:SubsequentEventMember2020-12-260000719733us-gaap:SubsequentEventMembercurrency:MXN2021-04-030000719733us-gaap:SubsequentEventMembercurrency:USD2021-04-030000719733us-gaap:SubsequentEventMember2021-04-030000719733us-gaap:SubsequentEventMembercurrency:MXN2021-07-030000719733us-gaap:SubsequentEventMembercurrency:USD2021-07-030000719733us-gaap:SubsequentEventMember2021-07-030000719733us-gaap:SubsequentEventMembercurrency:MXN2021-10-020000719733us-gaap:SubsequentEventMembercurrency:USD2021-10-020000719733us-gaap:SubsequentEventMember2021-10-020000719733us-gaap:SubsequentEventMembercurrency:MXN2022-01-010000719733us-gaap:SubsequentEventMembercurrency:USD2022-01-010000719733us-gaap:SubsequentEventMember2022-01-0100007197332019-11-060000719733us-gaap:LineOfCreditMember2020-06-270000719733us-gaap:OtherCurrentAssetsMemberus-gaap:ForwardContractsMember2020-06-270000719733us-gaap:OtherCurrentAssetsMemberus-gaap:ForwardContractsMember2019-06-290000719733us-gaap:OtherNoncurrentAssetsMemberus-gaap:ForwardContractsMember2020-06-270000719733us-gaap:OtherNoncurrentAssetsMemberus-gaap:ForwardContractsMember2019-06-290000719733us-gaap:OtherCurrentLiabilitiesMemberus-gaap:ForwardContractsMember2020-06-270000719733us-gaap:OtherCurrentLiabilitiesMemberus-gaap:ForwardContractsMember2019-06-290000719733us-gaap:OtherNoncurrentLiabilitiesMemberus-gaap:ForwardContractsMember2020-06-270000719733us-gaap:OtherNoncurrentLiabilitiesMemberus-gaap:ForwardContractsMember2019-06-290000719733us-gaap:OtherCurrentAssetsMemberus-gaap:InterestRateSwapMember2020-06-270000719733us-gaap:OtherCurrentAssetsMemberus-gaap:InterestRateSwapMember2019-06-290000719733us-gaap:OtherCurrentLiabilitiesMemberus-gaap:InterestRateSwapMember2020-06-270000719733us-gaap:OtherCurrentLiabilitiesMemberus-gaap:InterestRateSwapMember2019-06-290000719733us-gaap:OtherNoncurrentLiabilitiesMemberus-gaap:InterestRateSwapMember2020-06-270000719733us-gaap:OtherNoncurrentLiabilitiesMemberus-gaap:InterestRateSwapMember2019-06-290000719733us-gaap:DesignatedAsHedgingInstrumentMemberus-gaap:ForwardContractsMember2019-06-290000719733us-gaap:DesignatedAsHedgingInstrumentMemberus-gaap:ForwardContractsMember2019-06-302020-06-270000719733us-gaap:DesignatedAsHedgingInstrumentMemberus-gaap:ForwardContractsMember2020-06-270000719733us-gaap:InterestRateSwapMemberus-gaap:DesignatedAsHedgingInstrumentMember2019-06-290000719733us-gaap:InterestRateSwapMemberus-gaap:DesignatedAsHedgingInstrumentMember2019-06-302020-06-270000719733us-gaap:InterestRateSwapMemberus-gaap:DesignatedAsHedgingInstrumentMember2020-06-270000719733us-gaap:DesignatedAsHedgingInstrumentMember2019-06-290000719733us-gaap:DesignatedAsHedgingInstrumentMember2019-06-302020-06-270000719733us-gaap:DesignatedAsHedgingInstrumentMember2020-06-270000719733us-gaap:DesignatedAsHedgingInstrumentMemberus-gaap:ForwardContractsMember2018-06-300000719733us-gaap:DesignatedAsHedgingInstrumentMemberus-gaap:ForwardContractsMember2018-07-012019-06-290000719733us-gaap:InterestRateSwapMemberus-gaap:DesignatedAsHedgingInstrumentMember2018-06-300000719733us-gaap:InterestRateSwapMemberus-gaap:DesignatedAsHedgingInstrumentMember2018-07-012019-06-290000719733us-gaap:DesignatedAsHedgingInstrumentMember2018-06-300000719733us-gaap:DesignatedAsHedgingInstrumentMember2018-07-012019-06-290000719733us-gaap:DesignatedAsHedgingInstrumentMemberus-gaap:ForwardContractsMember2017-07-010000719733us-gaap:DesignatedAsHedgingInstrumentMemberus-gaap:ForwardContractsMember2017-07-022018-06-300000719733us-gaap:InterestRateSwapMemberus-gaap:DesignatedAsHedgingInstrumentMember2017-07-010000719733us-gaap:InterestRateSwapMemberus-gaap:DesignatedAsHedgingInstrumentMember2017-07-022018-06-300000719733us-gaap:DesignatedAsHedgingInstrumentMember2017-07-010000719733us-gaap:DesignatedAsHedgingInstrumentMember2017-07-022018-06-300000719733us-gaap:FairValueMeasurementsRecurringMemberus-gaap:FairValueInputsLevel1Memberus-gaap:ForwardContractsMember2020-06-270000719733us-gaap:FairValueMeasurementsRecurringMemberus-gaap:FairValueInputsLevel2Memberus-gaap:ForwardContractsMember2020-06-270000719733us-gaap:FairValueMeasurementsRecurringMemberus-gaap:FairValueInputsLevel3Memberus-gaap:ForwardContractsMember2020-06-270000719733us-gaap:FairValueMeasurementsRecurringMemberus-gaap:ForwardContractsMember2020-06-270000719733us-gaap:FairValueMeasurementsRecurringMemberus-gaap:FairValueInputsLevel1Member2020-06-270000719733us-gaap:FairValueMeasurementsRecurringMemberus-gaap:FairValueInputsLevel2Member2020-06-270000719733us-gaap:FairValueMeasurementsRecurringMemberus-gaap:FairValueInputsLevel3Member2020-06-270000719733us-gaap:FairValueMeasurementsRecurringMemberus-gaap:InterestRateSwapMember2020-06-270000719733us-gaap:FairValueMeasurementsRecurringMemberus-gaap:InterestRateSwapMemberus-gaap:FairValueInputsLevel1Member2019-06-290000719733us-gaap:FairValueMeasurementsRecurringMemberus-gaap:FairValueInputsLevel2Memberus-gaap:InterestRateSwapMember2019-06-290000719733us-gaap:FairValueMeasurementsRecurringMemberus-gaap:FairValueInputsLevel3Memberus-gaap:InterestRateSwapMember2019-06-290000719733us-gaap:FairValueMeasurementsRecurringMemberus-gaap:InterestRateSwapMember2019-06-290000719733us-gaap:FairValueMeasurementsRecurringMemberus-gaap:FairValueInputsLevel1Memberus-gaap:ForwardContractsMember2019-06-290000719733us-gaap:FairValueMeasurementsRecurringMemberus-gaap:FairValueInputsLevel2Memberus-gaap:ForwardContractsMember2019-06-290000719733us-gaap:FairValueMeasurementsRecurringMemberus-gaap:FairValueInputsLevel3Memberus-gaap:ForwardContractsMember2019-06-290000719733us-gaap:FairValueMeasurementsRecurringMemberus-gaap:ForwardContractsMember2019-06-290000719733ktcc:KeyTronicEMSMember2019-06-302020-06-270000719733ktcc:KeyTronicEMSMember2018-07-012019-06-290000719733ktcc:KeyTronicEMSMember2017-07-022018-06-300000719733ktcc:KeyboardMember2019-06-302020-06-270000719733ktcc:KeyboardMember2018-07-012019-06-290000719733ktcc:KeyboardMember2017-07-022018-06-300000719733country:US2019-06-302020-06-270000719733country:US2018-07-012019-06-290000719733country:US2017-07-022018-06-300000719733us-gaap:NonUsMember2019-06-302020-06-270000719733us-gaap:NonUsMember2018-07-012019-06-290000719733us-gaap:NonUsMember2017-07-022018-06-300000719733country:US2020-06-270000719733country:US2019-06-290000719733country:US2018-06-300000719733country:MX2020-06-270000719733country:MX2019-06-290000719733country:MX2018-06-300000719733ktcc:VietnamDomain2020-06-270000719733ktcc:VietnamDomain2019-06-290000719733ktcc:VietnamDomain2018-06-300000719733country:CN2020-06-270000719733country:CN2019-06-290000719733country:CN2018-06-300000719733country:CN2019-06-302020-06-270000719733country:CN2018-07-012019-06-290000719733country:CN2017-07-022018-06-300000719733country:CA2019-06-302020-06-270000719733country:CA2018-07-012019-06-290000719733country:CA2017-07-022018-06-300000719733ktcc:CustomeraMember2019-06-302020-06-270000719733ktcc:CustomeraMember2018-07-012019-06-290000719733ktcc:CustomeraMember2017-07-022018-06-300000719733ktcc:CustomerBMember2019-06-302020-06-2700007197332019-06-302019-09-2800007197332019-09-292019-12-2800007197332019-12-292020-03-2800007197332018-07-012018-09-2900007197332018-09-302018-12-2900007197332018-12-302019-03-3000007197332019-03-312019-06-290000719733us-gaap:OffMarketFavorableLeaseMember2020-06-270000719733us-gaap:OffMarketFavorableLeaseMember2019-06-302020-06-270000719733us-gaap:NoncompeteAgreementsMember2019-06-290000719733us-gaap:NoncompeteAgreementsMember2018-07-012019-06-290000719733us-gaap:CustomerRelationshipsMember2018-07-012019-06-290000719733us-gaap:CustomerRelationshipsMember2019-06-290000719733us-gaap:OffMarketFavorableLeaseMember2019-06-290000719733us-gaap:OffMarketFavorableLeaseMember2018-07-012019-06-290000719733srt:MinimumMemberus-gaap:NoncompeteAgreementsMember2019-06-302020-06-270000719733us-gaap:NoncompeteAgreementsMembersrt:MaximumMember2019-06-302020-06-270000719733us-gaap:OffMarketFavorableLeaseMembersrt:MinimumMember2019-06-302020-06-270000719733us-gaap:OffMarketFavorableLeaseMembersrt:MaximumMember2019-06-302020-06-270000719733us-gaap:TransferredOverTimeMember2019-06-302020-06-270000719733us-gaap:TransferredOverTimeMember2018-07-012019-06-290000719733us-gaap:TransferredAtPointInTimeMember2019-06-302020-06-270000719733us-gaap:TransferredAtPointInTimeMember2018-07-012019-06-290000719733us-gaap:CostOfSalesMember2019-06-302020-06-270000719733us-gaap:SellingGeneralAndAdministrativeExpensesMember2019-06-302020-06-270000719733srt:ScenarioPreviouslyReportedMember2019-09-280000719733srt:RestatementAdjustmentMember2019-09-2800007197332019-09-280000719733srt:ScenarioPreviouslyReportedMember2019-12-280000719733srt:RestatementAdjustmentMember2019-12-280000719733srt:ScenarioPreviouslyReportedMember2020-03-280000719733srt:RestatementAdjustmentMember2020-03-2800007197332020-03-280000719733us-gaap:InventoryValuationReserveMember2019-06-290000719733us-gaap:InventoryValuationReserveMember2018-06-300000719733us-gaap:InventoryValuationReserveMember2017-07-010000719733us-gaap:InventoryValuationReserveMember2019-06-302020-06-270000719733us-gaap:InventoryValuationReserveMember2018-07-012019-06-290000719733us-gaap:InventoryValuationReserveMember2017-07-022018-06-300000719733us-gaap:InventoryValuationReserveMember2020-06-270000719733us-gaap:AllowanceForCreditLossMember2019-06-290000719733us-gaap:AllowanceForCreditLossMember2018-06-300000719733us-gaap:AllowanceForCreditLossMember2017-07-010000719733us-gaap:AllowanceForCreditLossMember2019-06-302020-06-270000719733us-gaap:AllowanceForCreditLossMember2018-07-012019-06-290000719733us-gaap:AllowanceForCreditLossMember2017-07-022018-06-300000719733us-gaap:AllowanceForCreditLossMember2020-06-27

UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
 ____________________________________________________________ 
FORM 10-K
 ____________________________________________________________ 
 
☒ ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
FOR THE FISCAL YEAR ENDED JUNE 27, 2020
OR
 ☐ TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(D) OF THE SECURITIES EXCHANGE ACT OF 1934
FOR THE PERIOD FROM             TO             
Commission File Number 0-11559
 ____________________________________________________________ 
KEY TRONIC CORPORATION
(Exact name of registrant as specified in its charter)
 ____________________________________________________________ 
Washington   91-0849125
(State or other jurisdiction of
Incorporation or organization) 		  (I.R.S. Employer
Identification No.)
4424 North Sullivan Road Spokane Valley, Washington 99216
(Address of principal executive offices) (Zip Code)

(509) 928-8000
(Registrant’s telephone number, including area code)
N/A
(Former name, former address and former fiscal year, if changed since last report)
 ____________________________________________________________  
Securities Registered Pursuant to Section 12(b) of the Act: None
Title of each class Trading Symbol Name of each exchange on which registered
Common stock, no par value KTCC The NASDAQ Stock Market LLC
Securities Registered Pursuant to Section 12(g) of the Act: None
  ____________________________________________________________ 
Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.    Yes  ☐    No  ☒
Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Exchange Act.    Yes  ☐    No  ☒
Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.    Yes  ☒    No  ☐
Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulations S-T (§ 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).    Yes  ☒    No  ☐
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act.
(Check one):
 
Large accelerated filer ☐ Accelerated filer ☐
Non-accelerated filer
☒
Smaller reporting company ☒
Emerging growth company ☐
If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐
Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of
the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C.
7262(b)) by the registered public accounting firm that prepared or issued its audit report. ☒
Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).    Yes  ☐    No  ☒
State the aggregate market value of the voting and non-voting common equity held by non affiliates computed by reference to the price at which the common equity was last sold, or the average bid and asked price of such common equity, as of the last business day of the registrant’s most recently completed second fiscal quarter.
As of December 31, 2019, the aggregate market value of the registrant’s common stock held by non-affiliates of the registrant was $56.7 million based on the closing price as reported on the NASDAQ.
Indicate the number of shares outstanding of each of the issuer’s classes of common stock, as of the latest practicable date: 10,759,680 shares of common stock were outstanding as of September 4, 2020.
 ____________________________________________________________  
Documents Incorporated by Reference:
Certain information is incorporated into Part III of this report by reference to the Proxy Statement for the registrant’s 2020 annual meeting of stockholders to be filed with the Securities and Exchange Commission pursuant to Regulation 14A not later than 120 days after the end of the fiscal year covered by this Form 10-K.




KEY TRONIC CORPORATION
2020 FORM 10-K
TABLE OF CONTENTS
    Page No.
PART I
Item 1.
4
Item 1A.
9
Item 1B.
14
Item 2.
15
Item 3.
16
Item 4.
16
PART II
Item 5.
16
Item 6.
18
Item 7.
19
Item 7A.
29
Item 8. 30-60
Item 9.
61
Item 9A.
61
Item 9B.
63
PART III
Item 10.
63
Item 11.
63
Item 12.
63
Item 13.
64
Item 14.
64
PART IV
Item 15.
64
70
3

FORWARD-LOOKING STATEMENTS
References in this report to “the Company,” “Key Tronic,” “KeyTronicEMS,” “we,” “our,” or “us” mean Key Tronic Corporation together with its subsidiaries, except where the context otherwise requires.
This Annual Report on Form 10-K contains forward-looking statements in addition to historical information. Forward-looking statements are subject to certain risks and uncertainties that could cause actual results to differ materially from those reflected in the forward-looking statements. Risks and uncertainties that might cause such differences include, but are not limited to those outlined in “Management’s Discussion and Analysis of Financial Condition and Results of Operations—Risks and Uncertainties that May Affect Future Results.” Readers are cautioned not to place undue reliance on forward-looking statements, which reflect management’s opinions only as of the date hereof. The Company undertakes no obligation to update forward-looking statements to reflect developments or information obtained after the date hereof and disclaims any obligation to do so. Readers should carefully review the risk factors described in periodic reports the Company files from time to time with the Securities and Exchange Commission, including Quarterly Reports on Form 10-Q and Current Reports on Form 8-K.
PART I
Item 1. BUSINESS
Background
Key Tronic Corporation (dba: KeyTronicEMS Co.) was organized in 1969, as a Washington corporation that locally manufactured computer keyboards. The ability to design, build and deliver a quality product led us to become a leading independent manufacturer of keyboards for computers in the United States. Our fully integrated design, tooling, and automated manufacturing capabilities enabled us to rapidly respond to customers’ needs for keyboards in production quantities worldwide. We supported our sales growth through the development and purchase of international manufacturing facilities. As the computer keyboard market matured with increasing competition from other international providers, we determined that our business could no longer solely rely on keyboard sales.
After assessing market conditions and our strengths and capabilities, we shifted our focus from keyboard manufacturing to contract manufacturing for a wide range of products. Our unique strategic attributes are based on our core strengths of innovative design and engineering expertise in electronics, mechanical engineering, sheet metal fabrication and stamping, and precision plastics combined with high-quality, low cost production, and assembly on an international basis while providing exceptional customer service. These strengths have made our company a strong competitor in the electronic manufacturing services (EMS) market.
Our Industry and Strategy
The expansion of the EMS industry and our acquisitions have allowed us to continue to expand our customer base and the industries that we serve. The increase in new programs represents a growing portion of our revenue and a promising foundation for our future. In keeping with our long-term strategic objectives, we have been successfully building a more diversified customer portfolio, spanning a wider range of industries. We currently offer our customers the following services: integrated electronic and mechanical engineering, precision plastic molding, sheet metal fabrication, printed circuit board (PCB) and complete product assembly, component selection, sourcing and procurement, worldwide logistics, and new product testing and production all at competitive pricing due to our global footprint. We differentiate ourselves from others our size and larger in the EMS industry by providing vertical integration, a flexible and responsive approach to our customer’s changing supply demand, and complete design engineering support.
We believe that we are well positioned in the EMS industry to continue the expansion of our customer base and achieve long-term growth. Our unique blend of multinational facilities, vertical integration, centralized management, and core strengths continue to support our growth and our customers’ needs. We continue to focus on controlling operating expenses and leveraging the synergistic capabilities of our world-class facilities in the United States, Mexico, China and Vietnam. This international production capability provides our customers with the benefits of improved supply-chain management, reduced inventory, lower labor costs, lower transportation costs, and reduced product fulfillment time. Given our competitive advantages and the growing pressure for new potential customers to move forward with their outsourcing strategies, we are strongly positioned to win new business in coming periods and grow our revenue and profits.
4

The EMS industry is intensely competitive. Although our customer base is growing, we still have less than 1% of the potential global market and our revenue can fluctuate significantly due to reliance on a concentrated base of customers. We are planning for new customer growth in the coming quarters by securing new programs with new and existing customers, increasing our worldwide manufacturing capacity, leveraging further our design engineering capabilities and continuing to improve our manufacturing and procurement processes and capabilities. Ongoing challenges that we face include but are not limited to the following: continuing to win programs from new and existing customers, balancing capital employed, production capacity and key personnel in support of new customer programs, improving operating efficiencies, controlling costs while developing competitive pricing strategies, and successfully transitioning new program wins to full production.
Customers and Marketing
We provide a mix of manufacturing services for outsourced Original Equipment Manufacturing (OEM) products. We provide the following EMS services: product design, surface mount technologies (SMT) and pin through hole capability for printed circuit board assembly, tool making, precision plastic molding, sheet metal fabrication and painting, liquid injection molding, complex assembly, automated tape winding, prototype design and full product assembly.
Sales of the majority of our products have not historically been seasonal in nature, but may be seasonal in the future if there are changes in the types of products manufactured. Sales can, however, fluctuate significantly between quarters from changes in customers and customer demand due to the concentration of sales generated by our largest customers.
For the fiscal years 2020, 2019 and 2018, the five largest customers in each year accounted for 40%, 41% and 42% of combined total net sales, respectively. We continue to diversify our customer base by adding additional programs and customers. We expect net sales to our five largest customers as a percentage of total net sales to approximate current levels going forward.
The following table represents all customers that represented 10% or more of total net sales during the last three fiscal years:
  Percentage of Net Sales by Fiscal Year
  2020 2019 2018
Customer A 18% 17% 19%
There can be no assurance that the Company’s principal customers will continue to purchase products from the Company at current levels. Moreover, the Company typically does not enter into long-term volume purchase contracts with its customers, and the Company’s customers have certain rights to extend or delay the shipment of their orders. The loss of one or more of the Company’s major customers, or the reduction, delay or cancellation of orders from such customers, could materially and adversely affect the Company’s business, operating results and financial condition.
We market our products and services primarily through our direct sales department which is comprised of strategically located field sales people and distributors. We also maintain relationships with several independent sales organizations to assist in marketing our EMS product lines.
Manufacturing
We have continually made investments in developing and expanding a capital equipment base to achieve vertical integration and efficiencies in our manufacturing processes. We have invested significant capital into SMT for volume manufacturing of complex printed circuit board assemblies and in our metal shop providing precision metal stamping, fabricating, and finishing. We also design and develop tooling for injection molding and sheet metal fabrication and manufacture the majority of plastic and sheet metal parts used in the products we manufacture. Additionally, we have equipment to maintain a controlled clean environment for manufacturing processes that require a high level of precise control.
We use a variety of manual and automated assembly processes in our facilities, depending upon product complexity and degree of customization. Some examples of automated processes include component insertion, SMT, selective soldering, flexible robotic assembly, automated storage tape winding, computerized vision system quality inspection, laser turrets, automated switch and key top installation, robotic welding, automated powder coat application, and automated functional testing.
Our engineering expertise and automated manufacturing processes enable us to work closely with our customers during the design and prototype stages of production and to jointly increase productivity and reduce response time to the marketplace. We use computer-aided design techniques and software to assist in preparation of the tool design layout and component placement, to reduce tooling and production costs, improve component and product quality, and enhance turnaround time during product development.
We purchase materials and components for our products from many different suppliers, including both domestic and international sources. We develop close working relationships with our suppliers, many of whom have been supplying products to us for several years.
5

Research, Development, and Engineering
As part of our long-term strategy, we are committed to supporting our customers by providing research, development, and engineering services. We have seen an increase in the success of providing design support on existing and potential customers in differentiating ourselves. These services allow us to facilitate in optimizing new product designs, and the production processes of our customers’ programs.
Research, development, and engineering (RD&E) expenses consist principally of employee related costs, third party development costs, program materials costs, depreciation, and allocated information technology and facilities costs.
Competition
The market for the products and services we provide is highly competitive. There are numerous competitors in the EMS industry, many of which have substantially more resources and are more geographically diverse than we are. Some of our competitors have similar international production capabilities, large financial resources and some have substantially greater manufacturing, research and development, and marketing resources. There is also competition from the manufacturing operations of our current and potential customers, who are continually evaluating the merits of manufacturing their products internally versus the advantages of outsourcing. We believe that we can currently compete favorably in these areas primarily on the basis of our international footprint, responsiveness, creativity, vertical production capability, quality, and cost.
Trademarks
Our name and logo are federally registered trademarks, and we believe they are valuable assets of our business. We operate under the trade name “KeyTronicEMS” to better identify our primary business concentration in contract manufacturing in the EMS industry.
Employees
We consider our employees to be our primary strength and we make considerable efforts to maintain a well-qualified workforce. Our employee benefits include bonus programs involving periodic payments to all employees based on meeting quarterly or fiscal year performance targets. We regularly provide transportation, medical services, and meals to all of our employees in foreign locations. The Company also has defined contribution plans available to U.S. employees who have attained age 21 and provide group health, life, and disability insurance plans. We also maintain share based compensation plans and other long-term incentive plans for certain employees and outside directors.
As of June 27, 2020 we had 5,741 full-time employees compared to 4,067 on June 29, 2019, and 4,701 on June 30, 2018. Since we can have significant fluctuations in product demand, we seek to maintain flexibility in our workforce by utilizing skilled temporary labor in some of our manufacturing facilities in addition to full-time employees.
Backlog
On July 25, 2020 our order backlog was valued at approximately $215.3 million, compared to approximately $159.5 million on July 27, 2019. The amount of backlog is not necessarily indicative of future sales but can be indicative of trends in expected future sales revenue. Due to the relationships with our customers, we will occasionally allow orders to be canceled or rescheduled and as a result it is not a meaningful indicator of future financial results. If there are canceled or rescheduled orders, we typically negotiate fees to cover the costs we have incurred. Order backlog consists of purchase orders received for products expected to be shipped approximately within the next twelve months, although shipment dates are subject to change due to design modifications, customer forecast changes, or other customer requirements.
Foreign Markets
Information concerning net sales and long-lived assets (property, plant, and equipment) by geographic areas is set forth in Note 12, “Enterprise-Wide Disclosures” of the consolidated financial statements of this Annual Report on Form 10-K and that information is incorporated herein.
6

Executive Officers of the Registrant
The table below sets forth the name, current age and current position of our executive officers and other significant employees:
Name Age Positions Held
Executive Officers
Craig D. Gates 61 President and Chief Executive Officer
Brett R. Larsen 47 Executive Vice President of Administration, Chief Financial Officer, and Treasurer
Philip S. Hochberg 58 Executive Vice President of Business Development
Duane D. Mackleit 52 Executive Vice President of Operations
David H. Knaggs 39 Vice President of Quality and Regulatory Affairs
Chad T. Orebaugh 49 Vice President of Engineering
Thomas Despres 58
Vice President of Southwest Operations
Mark Courtney 54
Vice President of Supply Chain
Executive Officers
CRAIG D. GATES – President and Chief Executive Officer
Mr. Gates, age 61, has been President and Chief Executive officer of the Company since April 2009. Previously, he was Executive Vice President and General Manager from August 2002 to April 2009. He served as Executive Vice President of Marketing, Engineering and Sales from July 1997 to August 2002 and served as Vice President and General Manager of New Business Development from October 1995 to July 1997. He joined the Company as Vice President of Engineering in October of 1994. From 1982 to 1991 he held various engineering and management positions within the Microswitch Division of Honeywell, Inc., in Freeport, Illinois, and from 1991 to October 1994 he served as Director of Operations, Electronics for Microswitch. Mr. Gates has a Bachelor of Science Degree in Mechanical Engineering and a Masters in Business Administration from the University of Illinois, Urbana.
BRETT R. LARSEN – Executive Vice President of Administration, Chief Financial Officer, and Treasurer
Mr. Larsen, age 47, has served as Executive Vice President of Administration, Chief Financial Officer, and Treasurer since July 2015. Previously, he was Vice President of Finance and Controller from February 2010 to July 2015. He was Chief Financial Officer of FLSmidth Spokane, Inc. from December 2008 to February 2010. From October 2005 through November 2008, Mr. Larsen served as Controller of Key Tronic Corporation. From May 2004 to October 2005, Mr. Larsen served as Manager of Financial Reporting of Key Tronic Corporation. From 2002 to May 2004, Mr. Larsen was an audit manager for the public accounting firm BDO USA, LLP. He also held various auditing and supervisory positions with Grant Thornton LLP from 1997 to 2002. Mr. Larsen has a Bachelor of Science degree in Accounting and a Masters degree in Accounting from Brigham Young University and is a Certified Public Accountant.
PHILIP S. HOCHBERG – Executive Vice President of Business Development
Mr. Hochberg, age 58, has been Executive Vice President of Business Development since July 2012. Prior to this, Mr. Hochberg served as Vice President of Business Development from October 2009 through June 2012. He was Director of Business Development and Program Management from July 2008 to October 2009. Mr. Hochberg served as Director of Business Development from October 2004 to July 2008 and as Director of EMS Sales and Marketing from July 2000 to October 2004. Prior to joining Key Tronic, Mr. Hochberg worked for Quinton Instrument Company as their Director of Marketing and Product Management from 1992 to 2000. From 1988 to 1992, he was employed by SpaceLabs Medical as their Business Development Marketing Manager. Mr. Hochberg has an MBA from the University of British Columbia, a BA in Psychology, with a minor in Business from Washington University in St. Louis.
7

DUANE D. MACKLEIT – Executive Vice President of Operations
Mr. Mackleit, age 52, has been Executive Vice President of Operations since December 2019. Prior to this, Mr. Mackleit served as Vice President of Program Management since July 2012. He served as Director of Program Management from July 2008 through June 2012. From May 2006 to July 2008 he served as Principal Program Manager. Prior to that, he served as Program Manager from March 2002 to May 2006 and Associate Program Manager from August 2000 to March 2002. Mr. Mackleit has also held several other positions with Key Tronic Corporation. Mr. Mackleit has an AA in Business from Spokane Falls Community College and a BA in Business/Marketing from Eastern Washington University. He also holds a MBA from Gonzaga University.
DAVID H. KNAGGS – Vice President of Quality and Regulatory Affairs
Mr. Knaggs, age 39, has been Vice President of Quality and Regulatory Affairs since November 2017. Previously he was Vice President of Quality since October 2016. Before joining KeyTronicEMS, Mr. Knaggs worked at Telect, Inc. from 2008 to 2016 as their Director of Engineering. Prior to that, he worked at Isothermal Systems Research as Lead Systems Engineer from 2003 to 2008. He has a Bachelor of Science degree in Mechanical Engineering with a minor in mathematics from the University of Washington.
CHAD T. OREBAUGH – Vice President of Engineering
Mr. Orebaugh, age 49, has been Vice President of Engineering since April 2017. Prior to this, Mr. Orebaugh served as Director of Engineering since May 2013. From April 2010 to May 2013, he served as Manager of Engineering. From January 2000 to April 2010 he served as Lead Mechanical Engineer. Prior to that, he served as Mechanical Engineer from October 1998 to January 2000 and Associate Mechanical Engineer since October 1997. Mr. Orebaugh holds a BA in Mechanical Engineering from Gonzaga University.
THOMAS DESPRES – Vice President of Southwest Operations
Thomas Despres, age 58, has been Vice President of Southwest Operations since November 2017. Prior to joining KeyTronicEMS, Mr. Despres worked for Gates Corporation as Plant General Manager from July 2017 to November 2017. From 2016 to 2017, he was self-employed and from 2012 to 2016 he was employed by Flextronics as Vice President Global Account Management. He has an MBA from Campbell University, and a BBA, Production Management from Ohio University in Athens.
MARK COURTNEY – Vice President of Supply Chain
Mark Courtney, age 54, has been Vice President of Supply Chain of the company since August 2019. Previously, he served as Purchasing Manager and Director of North American Purchasing from September 2015 to August 2019, and as Supply Chain Manager, ERP and Business Operations Manager for Amphenol Telect from August 2007 to September 2015. From March 2006 to August 2007, he served as Senior Buyer/Planner for Honeywell Specialty Materials and from June 2005 to March 2006 as Purchasing Manager for MRV Communications. From May 2000 to June 2005, he served as a Field and Inside Sales Associate for Arrow Electronics and from October 1991 to May 2000 held various positons at Alesis.
Available Information
Our principal executive offices are located at 4424 North Sullivan Road, Spokane Valley, Washington 99216, and our telephone number is (509) 928-8000. Our website is located at http://www.keytronic.com where filings of our Annual Report on Form 10-K, Quarterly Reports on Form 10-Q or current reports on Form 8-K are available after they have been filed with the Securities and Exchange Commission. The information presented on our website currently and in the future is not considered to be part of this document or any document incorporated by reference in this document.
8

Item 1A. RISK FACTORS
There are risks and uncertainties that could affect our business. These risks and uncertainties include but are not limited to, the risk factors described below, in Item 7A: “Quantitative and Qualitative Disclosures about Market Risk” and elsewhere in this Form 10-K.
RISKS AND UNCERTAINTIES THAT MAY AFFECT FUTURE RESULTS
The following risks and uncertainties could affect our actual results and could cause results to differ materially from past results or those contemplated by our forward-looking statements. When used herein, the words “expects,” “believes,” “anticipates” and other similar expressions are intended to identify forward-looking statements.
Our operations may be subject to certain risks.
We manufacture product in facilities located in Mexico, China, Vietnam and the United States. These operations may be subject to a number of risks, including:
•difficulties in staffing, turnover and managing onshore and offshore operations;
•political and economic instability (including acts of terrorism, pandemics, civil unrest, forms of violence and outbreaks of war), which could impact our ability to ship, manufacture, and/or receive product;
•unexpected changes in regulatory requirements and laws;
•longer customer payment cycles and difficulty collecting accounts receivable;
•export duties, import controls and trade barriers (including quotas);
•governmental restrictions on the transfer of funds;
•burdens of complying with a wide variety of foreign laws and labor practices; subject to trade wars and tariffs
•our locations may be impacted by hurricanes, tornadoes, earthquakes, water shortages, tsunamis, floods, typhoons, fires, extreme weather conditions and other natural or man-made disasters. Our locations may also be impacted by future temporary closures and labor constraints as a result of COVID-19.
Our operations in certain foreign locations receive favorable income tax treatment in the form of tax credits or other incentives. In the event that such tax incentives are not extended, are repealed, or we no longer qualify for such programs, our taxes may increase, which would reduce our net income.
Additionally, certain foreign jurisdictions restrict the amount of cash that can be transferred to the U.S or impose taxes and penalties on such transfers of cash. To the extent we have excess cash in foreign locations that could be used in, or is needed by, our operations in the United States, we may incur significant penalties and/or taxes to repatriate these funds.
We may experience fluctuations in quarterly results of operations.
Our quarterly operating results have varied in the past and may vary in the future due to a variety of factors, including adverse changes in the U.S. and global macroeconomic environment, volatility in overall demand for our customers’ products, success of customers’ programs, timing of new programs, new product introductions or technological advances by us, our customers and our competitors, and changes in pricing policies by us, our customers, our suppliers, and our competitors. Our customer base is diverse in the markets they serve, however, decreases in demand, particularly from customers in certain industries could affect future quarterly results. Additionally, our customers could be adversely impacted by illiquidity in the credit markets which could directly impact our operating results.
Component procurement, production schedules, personnel and other resource requirements are based on estimates of customer requirements. Occasionally, our customers may request accelerated production that can stress resources and reduce operating margins. Conversely, our customers may abruptly lower or cancel production which may lead to a sudden, unexpected increase in inventory or accounts receivable for which we may not be reimbursed even when under contract with customers. In addition, because many of our operating expenses are relatively fixed, a reduction in customer demand can harm our gross profit and operating results. The products which we manufacture for our customers have relatively short product lifecycles. Therefore, our business, operating results and financial condition are dependent in a significant way on our ability to obtain orders from new customers and new product programs from existing customers.
Operating results can also fluctuate if changes are made to significant estimates and assumptions. Significant estimates and assumptions include the allowance for doubtful receivables, provision for obsolete and non-saleable inventory, stock-based compensation, the valuation allowance on deferred tax assets, impairment of long-lived assets, long-term incentive compensation accrual, the provision for warranty costs, and the impact of hedging activities.
9

Due to the COVID-19 pandemic, we have seen extreme shifts in demand from our customer base. The possibility of future temporary closures and labor constraints, as well as the inability to predict customer demand, costs, and future supply chain disruptions during the rapidly changing COVID-19 environment can materially impact operating results.
We are exposed to general economic conditions, which could have a material adverse impact on our business, operating results and financial condition.
Adverse economic conditions and uncertainty in the global economy such as unstable global financial and credit markets, inflation, and recession can negatively impact our business. Unfavorable economic conditions could affect the demand for our customers’ products by triggering a reduction in orders as well as a decline in forecasts which could adversely affect our sales in future periods. Additionally, the financial strength of our customers and suppliers and their ability to obtain and rely on credit financing may affect their ability to fulfill their obligations to us and have an adverse effect on our financial results.
Adverse macroeconomic conditions as a result of COVID-19 can affect our business. The conditions can affect the Company’s ability to predict and plan for future supply chain disruptions, fluctuations in customer demand and costs, and the ability to operate as there is uncertainty over future temporary closures.
The majority of our sales come from a small number of customers and a decline in sales to any of these customers could adversely affect our business.
At present, our customer base is concentrated and could become more or less concentrated. There can be no assurance that our principal customers will continue to purchase products from us at current levels. Moreover, we typically do not enter into long-term volume purchase contracts with our customers, and our customers have certain rights to extend or delay the shipment of their orders. We, however, typically require that our customers contractually agree to buy back inventory purchased within specified lead times to build their products if not used.
The loss of one or more of our major customers, or the reduction, delay or cancellation of orders from such customers, due to economic conditions or other forces, could materially and adversely affect our business, operating results and financial condition. The contraction in demand from certain industries could impact our customer orders and have a negative impact on our operations over the foreseeable future. Additionally, if one or more of our customers were to become insolvent or otherwise unable to pay for the manufacturing services provided by us, our operating results and financial condition would be adversely affected.
We depend on a limited number of suppliers for certain components that are critical to our manufacturing processes. A shortage of these components or an increase in their price could interrupt our operations and result in a significant change in our results of operations.
We are dependent on many suppliers, including sole source suppliers, to provide key components and raw materials used in manufacturing customers’ products. We have seen supply shortages in certain electronic components. In addition, our suppliers' facilities may also experience earthquakes, tsunamis and other natural disasters which may cause a shortage of components. This can result in longer lead times and the inability to meet our customers request for flexible production and extended shipment dates. If demand for components outpaces supply, capacity delays could affect future operations. Delays in deliveries from suppliers or the inability to obtain sufficient quantities of components and raw materials could cause delays or reductions in shipment of products to our customers which could adversely affect our operating results and damage customer relationships.
Key Tronic is working closely with its employees and key suppliers to ascertain delays attributable to the COVID-19 pandemic. Potential delays in production and extended transit times of critical parts may cause a shortage of components.
We operate in a highly competitive industry; if we are not able to compete effectively in the EMS industry, our business could be adversely affected.
Competitors may offer customers lower prices on certain high volume programs. This could result in price reductions, reduced margins and loss of market share, all of which would materially and adversely affect our business, operating results, and financial condition. If we were unable to provide comparable or better manufacturing services at a lower cost than our competitors, it could cause sales to decline. In addition, competitors can copy our non-proprietary designs and processes after we have invested in development of products for customers, thereby enabling such competitors to offer lower prices on such products due to savings in development costs.
Cash and cash equivalents are exposed to concentrations of credit risk.
We place our cash with high credit quality institutions. At times, such balances may be in excess of the federal depository insurance limit or may be on deposit at institutions which are not covered by insurance. If such institutions were to become insolvent during which time it held our cash and cash equivalents in excess of the insurance limit, it could be necessary to obtain other credit financing to operate our facilities.
10

Our ability to secure and maintain sufficient credit arrangements is key to our continued operations.
There is no assurance that we will be able to retain or renew our credit agreements in the future. In the event the business grows rapidly or there is uncertainty in the macroeconomic climate, additional financing resources could be necessary in the current or future fiscal years. There is no assurance that we will be able to obtain equity or debt financing at acceptable terms, or at all in the future. In addition, we have restrictive covenants with our financial institution which could impact how we manage our business. If we cannot meet our financial covenants, our borrowings could become immediately payable which could have a material adverse impact on our financial statements. For a summary of our banking arrangements, see Note 4 Long-Term Debt of the “Notes to Consolidated Financial Statements.”
Fluctuations in foreign currency exchange rates could increase our operating costs.
We have manufacturing operations located in Mexico and China. A significant portion of our operations are denominated in the Mexican peso and the Chinese currency, the renminbi ("RMB"). Currency exchange rates fluctuate daily as a result of a number of factors, including changes in a country's political and economic policies. Volatility in the currencies of our entities and the United States dollar could seriously harm our business, operating results and financial condition. The primary impact of currency exchange fluctuations is on the cash, receivables, payables and expenses of our operating entities. As part of our hedging strategy, we currently use Mexican peso forward contracts to hedge foreign currency fluctuations for a portion of our Mexican peso denominated expenses. We currently do not hedge expenses denominated in RMB. Unexpected losses could occur from increases in the value of these currencies relative to the United States dollar.
As a result of COVID-19, significant currency exchange fluctuations can occur causing unexpected losses. Future temporary closures of production facilities in Mexico could also cause significant changes in our ability to qualify for hedge accounting treatment of our forward contracts to hedge foreign currency fluctuations. However, given the unprecedented nature of the pandemic the FASB staff believes that an entity may apply the exception in paragraph 815-30-40-4 for rare cases caused by extenuating circumstances that are related to the nature of the forecasted transaction and are outside the control or influence of an entity to delays in the timing of the forecasted transactions if those delays are related to the effects of the COVID-19 pandemic and are considered probable to still occur. In addition, the FASB staff believes that it would be acceptable for an entity to determine that missed forecasts related to the effects of the COVID-19 pandemic need not be considered when determining whether it has exhibited a pattern of missing forecasts that would call into question its ability to accurately predict forecasted transactions and the propriety of using cash flow hedge accounting in the future for similar transactions. 
Our success will continue to depend to a significant extent on our key personnel.
Our future success depends in large part on the continued service of our key technical, marketing and management personnel and on our ability to continue to attract and retain qualified production employees. There can be no assurance that we will be successful in attracting and retaining such personnel, particularly in our manufacturing locales that may be experiencing high demand for similar key personnel. The loss of key employees could have a material adverse effect on our business, operating results and financial condition.
If we are unable to maintain our technological and manufacturing process expertise, our business could be adversely affected.
The markets for our customers’ products are characterized by rapidly changing technology, evolving industry standards, frequent new product introductions and short product life cycles. The introduction of products embodying new technologies or the emergence of new industry standards can render existing products obsolete or unmarketable. Our success will depend upon our customers’ ability to enhance existing products and to develop and introduce, on a timely and cost-effective basis, new products that keep pace with technological developments and emerging industry standards and address evolving and increasingly sophisticated customer requirements. Failure of our customers to do so could substantially harm our customers’ competitive positions. There can be no assurance that our customers will be successful in identifying, developing and marketing products that respond to technological change, emerging industry standards or evolving customer requirements.
Start-up costs and inefficiencies related to new or transferred programs can adversely affect our operating results and such costs may not be recoverable if such new programs or transferred programs are canceled or don’t meet expected sales volumes.
Start-up costs, the management of labor and equipment resources in connection with the establishment of new programs and new customer relationships, and the need to obtain required resources in advance can adversely affect our gross margins and operating results. These factors are particularly evident in the ramping stages of new programs. These factors also affect our ability to efficiently use labor and equipment. We are currently managing a number of new programs. Consequently, our exposure to these factors has increased. In addition, if any of these new programs or new customer relationships were terminated, our operating results could be harmed, particularly in the short term. We may not be able to recoup these start-up costs or replace anticipated new program revenues.
11

Customers may change production timing and demand schedules which makes it difficult for us to schedule production and capital expenditures and to maximize the efficiency of our manufacturing capacity.
Changes in demand for customer products reduce our ability to accurately estimate the future requirements of our customers. This makes it difficult to schedule production and maximize utilization of our manufacturing capacity. We must determine the levels of business that we will seek and accept from customers, set production schedules, commit to procuring inventory, and allocate personnel and resources, based on our estimates of our customers' requirements. Customers can require sudden increases and decreases in production which can put added stress on resources and reduce margins. Sudden decreases in production can lead to excess inventory on hand which may or may not be reimbursed by our customers even when under contract.
Continued growth could further lead to capacity constraints. We may need to transfer production to other facilities, acquire new facilities, or outsource production which could negatively impact gross margin. The Company has been able to manage the arrival of components in an effort to control inventory levels of customers that have seen sharp decreases in demand, as a result of COVID-19.
An adverse change in the interest rates for our borrowings could adversely affect our financial condition.
We are exposed to interest rate risk under our revolving line of credit and term loan. We currently hedge a portion of our term loan with an interest rate swap. We have not historically hedged the interest rate on our credit facility; therefore, unless we do so, significant changes in interest rates could adversely affect our results of operations. Refer to the discussion in note 4, "Long-Term Debt" to the consolidated financial statements for further details of our debt obligations. We are also exposed to interest rate risk on our factoring activities.
Compliance or the failure to comply with current and future environmental and health laws or regulations could cause us significant expense.
We are subject to a variety of domestic and foreign environmental regulations relating to the use, storage, and disposal of materials used in our manufacturing processes. If we fail to comply with any present or future regulations, we could be subject to future liabilities or the suspension of current manufacturing operations. In addition, such regulations could restrict our ability to expand our operations or could require us to acquire costly equipment, substitute materials, or incur other significant expenses to comply with government regulations.
To protect the health of its employees, the Company has implemented the recommendations of WHO and the CDC including wearing of face masks and shields, workstation arrangements to provide social distancing, temperature monitoring, enhanced worksite disinfection, spacing in cafeterias and break areas, contact management and other precautions. The Company is also in compliance with government regulations related to COVID-19.
Our stock price is volatile.
Holders of the common stock will suffer immediate dilution to the extent outstanding equity awards are exercised to purchase common stock. Our stock price may be subject to wide fluctuations and possible rapid increases or declines over a short time period. These fluctuations may be due to factors specific to us such as our stock's thinly traded nature, variations in quarterly operating results or changes in earnings estimates, or to factors relating to the EMS industry or to the securities markets in general, which, in recent years, have experienced significant price fluctuations. These fluctuations often have been unrelated to the operating performance of the specific companies whose stocks are traded.
Due to inherent limitations, there can be no assurance that our system of disclosure and internal controls and procedures will be successful in preventing all errors, theft and fraud, or in informing management of all material information in a timely manner.
Management does not expect that our disclosure controls and internal controls and procedures will prevent all errors or fraud. A control system is designed to give reasonable, but not absolute, assurance that the objectives of the control system are met. In addition, any control system reflects resource constraints and the benefits of controls must be considered relative to their costs. Inherent limitations of a control system may include: judgments in decision making may be faulty, breakdowns can occur simply because of error or mistake and controls can be circumvented by collusion or management override. Due to the inherent limitations in a cost-effective control system, misstatements due to error or fraud may occur and may not be detected.
If we do not manage our growth effectively, our profitability could decline.
Our business is experiencing growth which can place considerable additional demands upon our management team and our operational, financial and management information systems. Our ability to manage growth effectively requires us to continue to implement and improve these systems; avoid cost overruns; maintain customer, supplier and other favorable business relationships during possible transition periods; continue to develop the management skills of our managers and supervisors; and continue to train, motivate and manage our employees. Our failure to effectively manage growth could have a material adverse effect on our results of operations.
12

If our manufacturing processes and services do not comply with applicable statutory and regulatory requirements, or if we manufacture products containing design or manufacturing defects, demand for our services may decline and we may be subject to liability claims.
We manufacture and design products to our customers’ specifications, and, in some cases, our manufacturing processes and facilities may need to comply with applicable statutory and regulatory requirements. For example, medical devices that we manufacture or design, as well as the facilities and manufacturing processes that we use to produce them, are regulated by the Food and Drug Administration and non-U.S. counterparts of this agency. In addition, our customers’ products and the manufacturing processes that we use to produce them often are highly complex. As a result, products that we manufacture may at times contain manufacturing or design defects, and our manufacturing processes may be subject to errors or not be in compliance with applicable statutory and regulatory requirements. Defects in the products we manufacture or design, whether caused by a design, manufacturing or component failure or error, or deficiencies in our manufacturing processes, may result in delayed shipments to customers or reduced or canceled customer orders. If these defects or deficiencies are significant, our business reputation may also be damaged. The failure of the products that we manufacture or our manufacturing processes and facilities to comply with applicable statutory and regulatory requirements may subject us to legal fines or penalties and, in some cases, require us to shut down or incur considerable expense to correct a manufacturing process or facility. Our customers are required to indemnify us against liability associated with designing products to meet their specifications. However, if our customers are responsible for the defects, they may not, or may not have resources to, assume responsibility for any costs or liabilities arising from these defects, which could expose us to additional liability claims.
Energy price increases may negatively impact our results of operations.
Certain components that we use in our manufacturing process are petroleum-based. In addition, we, along with our suppliers and customers, rely on various energy sources in our transportation activities. While significant uncertainty currently exists about the future levels of energy prices, a significant increase is possible. Increased energy prices could cause an increase to our raw material costs and transportation costs. In addition, increased transportation costs related to certain suppliers and customers could be passed along to us. We may not be able to increase our product prices enough to offset these increased costs. In addition, any increase in our product prices may reduce our future customer orders and profitability.
Disruptions to our information systems, including security breaches, losses of data or outages, could adversely affect our operations.
We rely on information technology networks and systems to process, transmit and store electronic information. In particular, we depend on our information technology infrastructure for a variety of functions, including worldwide financial reporting, inventory management, procurement, invoicing and email communications. Any of these systems may be susceptible to outages due to fire, floods, power loss, telecommunications failures, terrorist attacks and similar events. Despite the implementation of network security measures, our systems and those of third parties on which we rely may also be vulnerable to computer viruses, break-ins and similar disruptions. If we or our vendors are unable to prevent such outages and breaches, our operations could be disrupted.
We are involved in various legal proceedings.
In the past, we have been notified of claims relating to various matters including contractual matters, intellectual property rights or other issues arising in the ordinary course of business. In the event of such a claim, we may be required to spend a significant amount of money to defend or otherwise address the claim. Any litigation or dispute resolution, even where a claim is without merit, could result in substantial costs and diversion of resources. Accordingly, the resolution or adjudication of such disputes, even those encountered in the ordinary course of business, could have a material effect on our business, consolidated financial conditions and results of operations.
Our levels of insurance coverage may not be sufficient for potential damages, claims or losses.
We have various forms of business and liability insurance which we believe are appropriate based on the needs of companies in our industry. As a result, not all of our potential business risks or potential losses would be covered by our insurance policies. If we sustain a significant claim or loss which is not covered by insurance, our net income could be negatively impacted.
13

Changes in securities laws and regulations will increase our costs and risk of noncompliance.
We are required to file as an accelerated filer. As such, we are subject to additional requirements contained in the Sarbanes-Oxley Act of 2002 (the Sarbanes-Oxley Act) and more recently the Dodd-Frank Act. The Sarbanes-Oxley and Dodd-Frank Acts required or will require changes in some of our corporate governance, securities disclosure and compliance practices. In response to the requirements of the Sarbanes-Oxley and Dodd-Frank Acts, the SEC and NASDAQ promulgated new rules and additional rulemaking is expected in the future. Compliance with these new rules and future rules has increased and may increase further our legal, financial and accounting costs as well as a potential risk of noncompliance. Absent significant changes in related rules, which we cannot assure, we anticipate some level of increased costs related to these new regulations to continue indefinitely. We also expect these developments to make it more difficult and more expensive to obtain director and officer liability insurance, and we may be forced to accept reduced coverage or incur substantially higher costs to obtain coverage. Likewise, these developments may make it more difficult for us to attract and retain qualified members of our Board of Directors or qualified management personnel. Further, the costs associated with the compliance with and implementation of procedures under these and future laws and related rules could have a material impact on our results of operations. In addition, the costs associated with noncompliance with additional securities laws and regulations could also impact our business.
We may encounter complications with acquisitions, which could potentially harm our business.
Any current or future acquisitions may require additional equity financing, which could be dilutive to our existing shareholders, or additional debt financing, which could potentially affect our credit ratings. Any downgrades in our credit ratings associated with an acquisition could adversely affect our ability to borrow by resulting in more restrictive borrowing terms. To integrate acquired businesses, we must implement our management information systems, operating systems and internal controls, and assimilate and manage the personnel of the acquired operations. The integration of acquired businesses may be further complicated by difficulties managing operations in geographically dispersed locations. The integration of acquired businesses may not be successful and could result in disruption by diverting management’s attention from the core business. In addition, the integration of acquired businesses may require that we incur significant restructuring charges or other increases in our expenses and working capital requirements, which reduce our return on invested capital.
Acquisitions may involve numerous other risks and challenges including but not limited to: potential loss of key employees and customers of the acquired companies; the potential for deficiencies in internal controls at acquired companies; lack of experience operating in the geographic market or industry sector of the acquired business; constraints on available liquidity, and exposure to unanticipated liabilities of acquired companies. These and other factors could harm our ability to achieve anticipated levels of profitability at acquired operations or realize other anticipated benefits of an acquisition, and could adversely affect our consolidated business and operating results.
Changes in financial accounting standards may affect our reported financial condition or results of operations as well increase costs related to implementation of new standards and modifications to internal controls.
Our consolidated financial statements are prepared in conformity with accounting standards generally accepted in the United States, or U.S. GAAP. These principles are subject to amendments made primarily by the Financial Accounting Standards Board (FASB) and the Securities and Exchange Commission (SEC). A change in those policies can have a significant effect on our reported results and may affect our reporting of transactions which are completed before a change is announced. Changes to accounting rules or challenges to our interpretation or application of the rules by regulators may have a material adverse effect on our reported financial results or on the way we conduct business. In addition, the continued convergence of U.S. GAAP and International Financial Reporting Standards (“IFRS”) creates uncertainty as to the financial accounting policies and practices we will need to adopt in the future.
Item 1B. UNRESOLVED STAFF COMMENTS
None
14

Item 2. PROPERTIES AS OF DATE OF FILING
We have manufacturing and sales operations located in the United States, Mexico, China and Vietnam. The table below lists the locations and square footage of our operating facilities:
Location Approx.
Sq. Ft. 		Type of Interest
(Leased/Owned) 		Description of Use
Corinth, Mississippi 350,000  Leased Manufacturing and warehouse
El Paso, Texas 80,000  Leased Shipping and warehouse
Fayetteville, Arkansas 105,000  Leased Manufacturing and warehouse
Louisville, Kentucky 2,300  Leased Administration
Oakdale, Minnesota 103,000  Leased Manufacturing and warehouse
Spokane Valley, Washington 95,000  Leased Sales, research, administration and manufacturing
Spokane Valley, Washington 36,000  Leased Manufacturing
Total USA 771,300 
Juarez, Mexico 193,000  Leased Warehouse
Juarez, Mexico 174,000  Owned Manufacturing and warehouse
Juarez, Mexico 115,000  Owned Manufacturing and warehouse
Juarez, Mexico 103,000  Owned Manufacturing and warehouse
Juarez, Mexico 72,000  Leased Manufacturing and warehouse
Juarez, Mexico 66,000  Owned Manufacturing and warehouse
Juarez, Mexico 60,000  Owned Manufacturing and warehouse
Total Mexico 783,000 
Shanghai, China 114,000  Leased Manufacturing and warehouse
Shanghai, China 8,000  Leased Manufacturing
Total China 122,000 
Da Nang, Vietnam 133,000  Leased Manufacturing and warehouse
Total Vietnam 133,000 
Grand Total 1,809,300 
(1)
The geographic diversity of these locations allows us to offer services near certain of our customers and major electronics markets with the additional benefit of reduced labor costs. We consider the productive capacity of our current facilities sufficient to carry on our current business. In addition, in Juarez, Mexico one of our buildings includes adjacent vacant land that could be developed into additional manufacturing and warehouse space.
All of our facilities are ISO certified to ISO 9001:2015 standard and to Customs Trade Partnership against Terrorism (CTPAT). In addition, the Juarez, Mexico; Shanghai, China and Spokane, Washington facilities are registered/certified to IATF 16949 automotive standard, AS 9100D aviation, space and defense standard, ISO 13485:2016 medical devices, ISO 14001:2015 environmental standard, ANSI/ESD S20.20 Electrostatic Discharge Control Program, OHSAS 18001 Occupational Health and Safety standard, and SA8000 / ISO 2600 social accountability standard.
Oakdale, Minnesota and Corinth, Mississippi are additionally registered to ISO 14001:2015 environmental standard and to ISO 13485:2016 medical devices standard. Oakdale, Minnesota is additionally registered AS9100D aviation, space and defense standard, and NADCAP certified. Oakdale, Minnesota and Fayetteville, Arkansas are additional registered to ANSI/ESD S20.20 Electrostatic Discharge Control Program. The Spokane, Washington and Juarez, Mexico facilities are additionally registered to ISO/IEC 80079-34 explosive atmospheres. The Oakdale, Minnesota; Corinth, Mississippi; Fayetteville, Arkansas and Spokane, Washington facilities are all registered by the U.S. State Department for International Traffic in Arms Regulations (ITAR).

15

Item 3. LEGAL PROCEEDINGS
We are a party to certain lawsuits or claims in the ordinary course of business. We do not believe that these proceedings, individually or in the aggregate, will have a material adverse effect on our financial position, results of operations or cash flow. Refer to Commitment and Contingencies footnote for further details on litigation in the fiscal year.
Item 4. MINE SAFETY DISCLOSURES
Not Applicable
PART II
Item 5: MARKET FOR REGISTRANT’S COMMON EQUITY, RELATED SHAREHOLDER MATTERS, AND ISSUER PURCHASES OF EQUITY SECURITIES
Market Information
Our common stock is traded on the NASDAQ Global Market, formerly the NASDAQ National Market System under the symbol “KTCC.” Quarterly high and low sales prices for our common stock for fiscal years 2020 and 2019 were as follows:
  2020 2019
  High Low High Low
First Quarter $ 6.62  $ 4.83  $ 8.24  $ 7.41 
Second Quarter 6.48  5.27  7.61  5.33 
Third Quarter 6.99  2.51  7.30  5.59 
Fourth Quarter 5.45  2.59  6.25  4.97 
High and low stock prices are based on the daily sales prices reported by the NASDAQ Stock Market. These quotations represent prices between dealers without adjustment for markups, markdowns, and commissions, and may not represent actual transactions.
Holders and Dividends
As of June 27, 2020, we had 645 shareholders of common stock on record. As a result of our credit agreements, we are restricted from declaring or paying dividends in cash or stock without the Bank’s prior written consent. We have not paid a cash dividend and do not anticipate payment of dividends in the foreseeable future.
Equity Compensation Plan Information
Information concerning securities authorized for issuance under our equity compensation plans is set forth in Part III, Item 12 of this Annual Report, under the caption “Securities Authorized for Issuance under Equity Compensation Plans”, and that information is incorporated herein by reference.
16

Performance Graph
Set forth below is a line graph comparing the cumulative total shareholder return on our common stock with the cumulative total return of the NASDAQ Stock Market (U.S. & Foreign) Index and the NASDAQ Electronic Components Index in fiscal 2020.
KTCC-20200627_G1.JPG  
6/27/2015 7/2/2016 7/1/2017 6/30/2018 6/29/2019 6/27/2020
Key Tronic Corporation 100.00  69.32  66.51  71.11  46.72  49.34 
NASDAQ Composite 100.00  98.32  126.14  155.91  168.04  213.32 
NASDAQ Electronic Components 100.00  106.10  152.05  200.90  200.80  272.55 
17

Item 6: SELECTED FINANCIAL DATA
The following selected data is derived from our audited consolidated financial statements and should be read in conjunction with “Management’s Discussion and Analysis of Financial Condition and Results of Operations,” the consolidated financial statements and related notes, and other information included in this report.
Financial Highlights
(In thousands, except for Supplemental Data and Per Share Amounts)
  
Fiscal Year Ended
  June 27, 2020 June 29, 2019 June 30, 2018 July 1, 2017 July 2, 2016
Consolidated Statements of Operations Data:
Net sales $ 449,480  $ 464,044  $ 446,322  $ 467,797  $ 484,965 
Gross profit 35,249  34,601  34,169  38,300  38,825 
Gross margin percentage 7.8  % 7.5  % 7.7  % 8.2  % 8.0  %
Operating income (loss) 6,828  (5,958) 1,114  9,544  10,416 
Operating margin percentage 1.5  % (1.3) % 0.2  % 2.0  % 2.1  %
Net income (loss) 4,758  (7,982) (1,325) 5,617  6,533 
Net income (loss) per share – diluted 0.44  (0.74) (0.12) 0.51  0.58 
Consolidated Cash Flow Data:
Cash flows provided by (used in) operations (3)
(31,004) 919  3,122  2,284  571 
Capital expenditures 8,623  8,386  4,523  9,307  13,277 
Consolidated Balance Sheet Data:
Net working capital (1)
130,545  104,695  95,607  100,440  97,349 
Total assets 304,861  238,310  246,528  232,840  235,924 
Long-term liabilities 77,085  30,447  29,534  38,520  46,232 
Shareholders’ equity 115,557  114,459  118,081  116,567  105,582 
Book value per share (2)
$ 10.74  $ 10.64  $ 10.97  $ 10.83  $ 9.84 
Supplemental Data:
Number of shares outstanding at year-end 10,759,680  10,759,680  10,759,680  10,759,680  10,725,349 
Number of employees at year-end 5,741  4,067  4,701  5,038  4,947 
Approximate square footage of operational facilities 1,809,300  1,816,300  1,837,300  1,760,000  1,828,000 
(1)Net working capital is defined as total current assets less total current liabilities. Net working capital measures the portion of current assets that are financed by long term funds and is an indicator of short term financial management.
(2)Book value per share is defined as total shareholders’ equity divided by the number of shares outstanding at the end of the fiscal year.
(3)Reflects the retrospective adoption of ASU 2016-15, Statement of Cash Flows (Topic 230): Classification of Certain Cash Receipts and Cash Payments, during the year ended June 29, 2019. Please refer to Capital Resources and Liquidity section for further information.
18

Item 7: MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS
Overview
KeyTronicEMS is a leader in electronic manufacturing services and solutions to original equipment manufacturers of a broad range of products. We provide engineering services, worldwide procurement and distribution, materials management, world-class manufacturing and assembly services, in-house testing, and unparalleled customer service. Our international production capability provides our customers with benefits of improved supply-chain management, reduced inventories, lower transportation costs, and reduced product fulfillment time. We continue to make investments in all of our operating facilities to give us the production capacity, capabilities and logistical advantages to continue to win new business. The following information should be read in conjunction with the consolidated financial statements included herein and with Item 1A, Risk Factors included as part of this filing.
Our mission is to provide our customers with superior manufacturing and engineering services at the lowest total cost for the highest quality products, and create long-term mutually beneficial business relationships by employing our “Trust, Commitment, Results” philosophy.
Executive Summary
During the fourth quarter of fiscal year 2020, we won new programs involving sanitizer dispensing, automotive controllers, oil and gas drilling, wireless security and personal healthcare protective equipment. A large program that we announced in the third quarter, which when fully ramped is anticipated to contribute $100 million in annual revenue, got underway in the fourth quarter and is expected to contribute to revenue in fiscal 2021.
We reported net sales of $449.5 million for fiscal year 2020 compared to net sales of $464.0 million in fiscal year 2019. During the fourth quarter of fiscal year 2020, the Company’s revenue was constrained by the temporary shutdown of its facilities in Juarez by the Mexican government due to the COVID-19 pandemic and associated delays in production.
During the past fiscal year, we overcame a number of powerful global headwinds, including component shortages, trade disputes and the COVID-19 crisis, but we see the favorable trend of contract manufacturing returning to North America accelerating. On balance, the effect of the pandemic on our customer’s demand was a net positive during the second half of fiscal 2020. While some of our customers, particularly in the gaming industry, have seen large decreases in their demand, others have significantly increased their demand, including programs for healthcare and home-oriented consumer products and exercise equipment.
As we enter fiscal 2021, uncertainty remains around the continuing impact of COVID-19 and potential future disruptions to our production facilities and we continue to focus on protecting the health of all of our employees by adhering to current health guidelines. Nevertheless, thanks to the dedication and sacrifices of our employees, we enter the year with increasingly positive momentum. We continue to invest in new capacity and remain optimistic about our long-term opportunities for growth.
For the first quarter of fiscal year 2021, the Company expects to report revenue in the range of $118 million to $125 million. While the Company’s facilities in the US, Mexico, China and Vietnam are currently operating and rigorously following current health guidelines, uncertainty as to the possibility of future temporary closures, customer demand and costs, and future supply chain disruptions during the rapidly changing COVID-19 environment could significantly impact operations in coming periods. Due to the heightened risks associated with the above, we may issue updated guidance during the first quarter of fiscal year 2021.
We continue to diversify our customer base by adding additional programs and customers. Our current customer relationships involve a variety of products, including consumer electronics, electronic storage devices, plastics, household products, gaming devices, specialty printers, telecommunications, industrial equipment, military supplies, computer accessories, medical, educational, irrigation, automotive, transportation management, robotics, RFID, power supply, off-road vehicle equipment, fitness equipment, HVAC controls, consumer products, home building products, material handling systems, lighting equipment, consumer security products, smart security, architectural LED lighting, power meters and smart grid, wireless power solutions, sanitizer dispensing, automotive controllers, oil and gas drilling, wireless security and personal healthcare protective equipment.
Gross profit as a percent of net sales was 7.8 percent in fiscal year 2020 compared to 7.5 percent for the prior fiscal year. The increase in gross profit as a percentage of net sales was primarily related to streamlining efforts in the Company’s Juarez facilities and reductions in materials, offset by COVID related expenses. The level of gross margin is impacted by product mix, timing of the startup of new programs, facility utilization, and pricing within the electronics industry and material costs, which can fluctuate significantly from quarter to quarter and year to year.
Operating income as a percentage of net sales for fiscal year 2020 was 1.5 percent compared to operating loss of (1.3) percent for fiscal year 2019. The increase in operating income as a percentage of net sales was primarily driven by the one-time impairment of goodwill and intangible assets during fiscal year 2019.
19

Net income for fiscal year 2020 was $4.8 million or $0.44 per share, as compared to net loss of $(8.0) million or $(0.74) per share for fiscal year 2019. The increase in net income for fiscal year 2020 as compared to fiscal year 2019 was primarily driven by the one-time impairment of approximately $12.4 million related to the impairment of goodwill and intangible assets and $1.1 million in severance expense due to improvements in operating efficiencies during fiscal year 2019.
We maintain a strong balance sheet with a current ratio of 2.2 and a debt to equity ratio of 0.61. Total cash used in operating activities as defined on our cash flow statement was $31.0 million during fiscal year 2020. We maintain sufficient liquidity for our expected future operations. We believe cash flow from operations, our borrowing capacity, our accounts receivable sale program, and equipment financing should provide adequate capital for planned growth over the long term.
RESULTS OF OPERATIONS
Comparison of the Fiscal Year Ended June 27, 2020 with the Fiscal Year Ended June 29, 2019
The following table sets forth for the periods indicated certain items of the consolidated statements of income expressed as a percentage of net sales. The financial information and discussion below should be read in conjunction with the consolidated financial statements and notes contained in this Annual Report.
  Fiscal Year Ended
  June 27, 2020 % of
net sales 		June 29, 2019 % of
net sales 		$ change %  point
change
Net sales $ 449,480  100.0% $ 464,044  100.0% $ (14,564) —
Cost of sales 414,231  92.2 429,443  92.5 (15,212) (0.3)
Gross profit 35,249  7.8 34,601  7.5 648  0.3
Operating expenses:
Research, development and engineering 7,391  1.6 6,555  1.4 836  0.2
Selling, general and administrative 21,030  4.7 21,556  4.6 (526) 0.1
Impairment of goodwill and intangibles —  — 12,448  2.7 (12,448) (2.7)
Total operating expenses 28,421  6.3 40,559  8.7 (12,138) (2.4)
Operating income (loss) 6,828  1.5 (5,958) (1.3) 12,786  2.8
Interest expense, net 2,509  0.6 2,782  0.6 (273) —
Income (loss) before income taxes 4,319  1.0 (8,740) (1.9) 13,059  2.9
Income tax benefit (439) (0.1) (758) (0.2) 319  0.1
Net income (loss) $ 4,758  1.1% $ (7,982) (1.7)% $ 12,740  2.8
Effective income tax rate (10.2) % 8.7  %
Net Sales
The decrease in net sales of $14.6 million from prior year period was primarily driven by the temporary shutdown of its facilities in Juarez by the Mexican government due to the COVID-19 pandemic and associated delays in production.
The following table shows the revenue by industry sectors as a percentage of revenue for fiscal years 2020 and 2019:
  Fiscal Year Ended
  June 27, 2020 June 29, 2019
Industrial 42% 44%
Consumer 44 39
Gaming 5 8
Communication 4 5
Transportation 2 2
Printers 2 1
Computer and Peripheral 1 1
Total 100% 100%


20

We provide services to customers in a number of industries and produce a variety of products for our customers in each industry. Key Tronic does not target any particular industry, but rather seeks to find programs that strategically fit our vertical manufacturing capabilities. As we continue to diversify our customer base and win new customers, we will continue to see a change in the industry concentrations of our revenue.
Sales to foreign locations represented 24.6 percent and 23.0 percent of our total net sales in fiscal years 2020 and 2019, respectively.
Cost of Sales
Total cost of sales as a percentage of net sales was 92.2 percent and 92.5 percent in fiscal years 2020 and 2019, respectively.
We provide a reserve for obsolete and non-saleable inventories based on specific identification of inventory against current demand and recent usage. We also consider our customers' ability to pay for inventory whether or not there is a lead-time assurance agreement for a specific program. The amounts charged to expense for these inventories were approximately $136,000 and $91,000 in fiscal years 2020 and 2019, respectively.
We provide warranties on certain products we sell and estimate warranty costs based on historical experience and anticipated product returns. Warranty expense is related to workmanship claims on keyboards and EMS products. The amounts charged to expense are determined based on an estimate of warranty exposure. The net warranty expense was approximately $121,000 and $83,000 in fiscal years 2020 and 2019, respectively.
Gross Profit
Gross profit as a percentage of net sales was 7.8 percent and 7.5 percent in fiscal years 2020, and 2019, respectively. The 0.3 percentage point increase in gross profit as a percentage of net sales during fiscal year 2020 as compared to fiscal year 2019 is primarily related to streamlining efforts in the Company’s Juarez facilities and material cost reductions, partially offset by the dampening of fiscal year 2020 margins from the COVID-19 pandemic.
Changes in gross profit margins reflect the impact of a number of factors that can vary from period to period, including product mix, start-up costs and efficiencies associated with new programs, product life cycles, sales volumes, capacity utilization of our resources, management of inventories, component pricing and shortages, end market demand for customers’ products, fluctuations in and timing of customer orders, and competition within the EMS industry. These and other factors can cause variations in operating results. There can be no assurance that gross margins will not decrease in future periods.

We took early pay discounts to suppliers that totaled approximately $0.1 million and $0.8 million in fiscal years 2020 and 2019, respectively. Early pay discounts will fluctuate based on our liquidity and changes in the discounts and terms offered by our suppliers.
Research, Development and Engineering
Research, development and engineering expenses (RD&E) consists principally of employee related costs, third party development costs, program materials, depreciation and allocated information technology and facilities costs. Total RD&E expenses were $7.4 million in fiscal year 2020 and $6.6 million in fiscal year 2019, respectively. Total RD&E expenses as a percent of net sales was 1.6 percent in fiscal year 2020 and 1.4 in fiscal year 2019.
Selling, General and Administrative
Selling, general and administrative expenses (SG&A) consist principally of salaries and benefits, advertising and marketing programs, sales commissions, travel expenses, provision for doubtful accounts, facilities costs, and professional services. Total SG&A expenses were $21.0 million and $21.6 million in fiscal years 2020 and 2019, respectively. Total SG&A expenses as a percent of net sales were 4.7 percent and 4.6 percent in fiscal years 2020 and 2019, respectively. This 0.1 percentage point increase in SG&A as a percentage of net sales is primarily related to a decrease in sales year over year, partially offset by a decrease in travel expenses and a decrease in amortization expense related to intangibles assets that were impaired during fiscal year 2019.
Impairment of goodwill and intangibles
During fiscal year 2019, the Company assessed other finite-lived intangible assets including the Company’s customer relationships and favorable lease agreements due to an indicator of possible impairment being present, as discussed in footnote 14 of the “Notes to Consolidated Financial Statements.” As a result of the analysis performed, the Company determined that the carrying value of the customer relationships intangible asset was not recoverable and recorded an impairment for the entire carrying amount during the third quarter of fiscal year 2019. During fiscal year 2019, a goodwill impairment of $10.0 million and other intangible assets impairment of $2.5 million was recognized. The Company’s analysis did not indicate that any of its other long-lived assets were impaired.
21

Interest Expense
We had net interest expense of $2.5 million and $2.8 million in fiscal years 2020 and 2019, respectively. The decrease in interest expense is primarily related to a decrease in the interest rate on our line of credit.
Income Tax Benefit
We had an income tax benefit of approximately $(0.4) million during fiscal year 2020 and $(0.8) million during fiscal year 2019. The income tax benefit recognized during fiscal years 2020 and 2019 was primarily a function of U.S., and foreign taxes recognized at statutory rates and the net benefit associated with federal research and development tax credits, including the recognition of previously unrecognized tax benefits for federal research and development tax credits in fiscal year 2020 and offset by the tax impact of the nondeductible goodwill write-off in fiscal year 2019.
We continually review our requirements for liquidity domestically to fund current operations, revenue growth and to look for potential future acquisitions. We anticipate repatriating a portion of our unremitted foreign earnings. The estimated taxes associated with these expected repatriations are included in the income tax calculation. For further information on taxes please review footnote 6 of the “Notes to Consolidated Financial Statements.”
International Subsidiaries
We offer customers a complete global manufacturing solution. Our facilities provide our customers the opportunity to have their products manufactured in the facility that best serves specific cost, product manufacturing and distribution needs. The locations of active foreign subsidiaries are as follows:
•Key Tronic Juarez, SA de CV owns five facilities and leases two facilities in Juarez, Mexico. These facilities include an SMT facility, an assembly and molding facility, a sheet metal fabrication facility, and assembly and warehouse facilities. This subsidiary is primarily used to support our U.S. operations.
•Key Tronic Computer Peripherals (Shanghai) Co., Ltd. leases two facilities with SMT, assembly, global purchasing and warehouse capabilities in Shanghai, China, which began operations in 1999. Its primary function is to provide EMS services for export.
•Key Tronic Vietnam leases one facility in Da Nang, Vietnam. This facility includes SMT, assembly, and warehouse capabilities. Its primary function is to provide EMS services for export.
Foreign sales (based on shipping instructions) from our worldwide operations, including domestic exports, were $110.7 million and $106.7 million in fiscal years 2020 and 2019, respectively. Products and manufacturing services provided by our subsidiary operations are often shipped to customers directly by the parent company.
RESULTS OF OPERATIONS
Comparison of the Fiscal Year Ended June 29, 2019 with the Fiscal Year Ended June 30, 2018
To review the results of operations comparison of the fiscal year ended June 29, 2019 with the fiscal year ended June 30, 2018, please refer to our Form 10-K filed September 12, 2019 with the Securities and Exchange Commission or follow the link below.

22

Capital Resources and Liquidity
Operating Cash Flow
Net cash used in operating activities for fiscal year 2020 was $31.0 million compared to net cash provided by operating activities of $0.9 million and $3.1 million in fiscal years 2019 and 2018, respectively. The decrease in cash provided by operating activities from prior year was primarily attributable to the Company no longer factoring receivables at year end fiscal 2020, and an increase in inventory levels.
The $31.0 million of net cash used in operating activities during fiscal year 2020 is primarily related to $4.8 million of net income adjusted for $5.6 million of depreciation and amortization, $28.3 million increase in accounts receivable, a $14.7 million increase in inventory, a $7.7 million increase in other assets, a $1.6 million increase in contract assets, partially offset by a $6.6 million increase in accounts payable and a $3.7 million increase in accrued compensation and vacation.
The $0.9 million of net cash provided by operating activities during fiscal year 2019 was primarily related to $8.0 million of net loss, $12.4 million impairment of goodwill and intangibles, $7.3 million of depreciation and amortization, $6.7 million of cash received from arbitration settlement, a $3.3 million decrease in accounts receivable, partially offset by a $10.3 million increase in contract assets, a $4.5 million increase in other assets, a $2.6 million increase in accounts payable and a $1.4 million decrease in inventory.
The $3.1 million of net cash provided by operating activities during fiscal year 2018 was primarily due to $1.3 million of net loss adjusted for $7.8 million of depreciation and amortization and $4.5 million loss on arbitration, a $22.9 million increase in accounts payable, a $1.3 million decrease in accounts receivable, partially offset by an $18.1 million increase in inventory.
Accounts receivable fluctuates based on the timing of shipments, terms offered and collections. In addition, accounts receivable will fluctuate based upon the amount of accounts receivable sold under our Trade Accounts Receivable Purchase Program. During fiscal years 2020, 2019 and 2018, we factored receivables of $41.4 million, $81.0 million and $104.7 million, respectively, from accounts receivable sold to financial institutions, which are not included on our Consolidated Balance Sheets. The Company no longer had factored receivables at year end fiscal 2020. We purchase inventory based on customer forecasts and orders, and when those forecasts and orders change, the amount of inventory may also fluctuate. Accounts payable fluctuates with changes in inventory levels, volume of inventory purchases, negotiated supplier terms, and taking advantage of early pay discounts.
Investing Cash Flow
Cash flows used in investing activities were $3.6 million for fiscal year 2020. Cash flows used in investing activities were $1.9 million for fiscal year 2019 and cash flows provided by investing activities were $4.9 million in fiscal year 2018. Our primary use of cash in investing activities during fiscal years 2020, 2019 and 2018, was purchasing equipment to support increased production levels for new programs, and our primary source of cash provided by investing activities came from receipts of the deferred purchase price on factored receivables.
Operating and capital leases are often utilized when potential technical obsolescence and funding requirement advantages outweigh the benefits of equipment ownership. Capital expenditures and periodic lease payments are expected to be financed with internally generated funds and available borrowing capacities. During fiscal years 2020 and 2019, we did not receive any cash resulting from the sale and leaseback of equipment under operating leases. During fiscal year 2018, we received $1.0 million of cash resulting from the sale and leaseback of equipment under operating leases.
Financing Cash Flow
Cash flows provided by financing activities were $34.5 million in fiscal year 2020, cash flows provided by financing activities were $1.2 million in fiscal year 2019 and cash flows used in financing activities were $8.0 million in fiscal year 2018. Our primary financing activities during fiscal year 2020, were repayments on our term loans of $7.1 million as well as borrowings and repayments under our revolving line of credit facility. Our primary financing activities during fiscal year 2019 was repayments on our term loans of $5.9 million as well as borrowings and repayments under our revolving line of credit facility. Our primary financing activities during fiscal year 2018 was repayments on our term loans of $5.9 million as well as borrowings and repayments under our revolving line of credit facility.
As of June 27, 2020, the Company had an outstanding balance on the line of credit of $60.1 million. We had availability to borrow an additional $4.5 million under the Wells Fargo line of credit and we were in compliance with our loan covenants. Our cash requirements are affected by the level of current operations and new EMS programs. We believe that projected cash from operations, funds available under the revolving credit facility and fixed asset financing will be sufficient to meet our working and fixed capital requirements for the foreseeable future.
23

As of June 27, 2020, we had approximately $0.6 million of cash held by foreign subsidiaries. Under the Tax Cuts and Jobs Act, future cash repatriations from these foreign subsidiaries are no longer subject to U.S. income taxes, but may be subject to foreign withholding taxes. See additional discussion in Footnote 6, Income Taxes. The total amount of foreign withholding taxes required to be paid for the amount of foreign subsidiary cash on hand as of June 27, 2020, would approximate $21,000. The Company also has approximately $21.3 million of foreign earnings that have not been repatriated to the U.S. Of that amount, the Company estimates that $7.8 million is to be repatriated in the future, requiring foreign withholding taxes of $0.8 million that is currently accrued in our deferred tax liabilities. The remaining $13.5 million is considered to be permanently reinvested in Mexico and China. If these amounts were required to be repatriated, we estimate it would create an additional $0.8 million in foreign withholding taxes payable.
Contractual Obligations and Commitments
In the normal course of business, we enter into contracts which obligate us to make payments in the future. The table below sets forth our significant future obligations by fiscal year:
Payments Due by Fiscal Year (in thousands)
Total 2021 2022 2023 2024 2025 Thereafter
Term loans (1)
$ 10,871  $ 7,537  $ 2,917  $ 417  $ —  $ —  $ — 
Wells Fargo Bank N.A. revolving loan (2)
$ 60,094  $ —  $ —  $ —  $ 60,094  $ —  $ — 
Operating leases (3)
$ 19,793  $ 4,250  $ 3,373  $ 2,598  $ 2,004  $ 1,894  $ 5,674 
Purchase orders (4)
$ 46,420 
(1)The terms of the Wells Fargo Bank N.A. term loans are discussed in the consolidated financial statements at Note 4, “Long-Term Debt.” Principal on the term loan is payable in quarterly installments of $1.67 million commencing December 31, 2019 through September 30, 2021, and quarterly payments of $0.4 million commencing December 31, 2021 through September 30, 2022, with a final installment of all remaining unpaid principal due on September 30, 2022. The equipment term loan is payable in equal quarterly payments of approximately $0.2 million which commenced on March 31, 2017 and will continue through the maturity of the equipment term loan on June 30, 2021. The Company’s debt was paid in full in conjunction with the closing of a new credit facility subsequent to June 27, 2020. Refer to footnote 17 - Subsequent Events for additional details.
(2)The terms of the Wells Fargo Bank N.A. revolving loan are discussed in the consolidated financial statements at Note 4, “Long-Term Debt.” As of June 27, 2020, we were in compliance with our loan covenants. The Company’s debt was paid in full in conjunction with the closing of a new credit facility subsequent to June 27, 2020. Refer to footnote 17 - Subsequent Events for additional details.
(3)We maintain vertically integrated manufacturing operations in the United States, Mexico, China and Vietnam. We lease some of our administrative and manufacturing facilities and equipment. A complete discussion of properties can be found in Part 1, Item 2 at “Properties.” Leases have proven to be an acceptable method for us to acquire new or replacement equipment and to maintain facilities with a minimum impact on our short term cash flows for operations. In addition, such operations are heavily dependent upon technically superior manufacturing equipment including molding machines in various tonnages, Surface Mount Technology (SMT) lines, sheet metal fabrication and stamping machines, clean rooms, and automated insertion, and test equipment for the various products we are capable of producing.
(4)As of June 27, 2020, we had open purchase order commitments for materials and other supplies of approximately $46.4 million. Included in the open purchase orders are various blanket orders for annual requirements. Actual needs under these blanket purchase orders fluctuate with our manufacturing levels and as such cannot be broken out between fiscal years. In addition, we have contracts with many of our customers that minimize our exposure to losses for material purchased within lead-times necessary to meet customer forecasts. Purchase orders generally can be cancelled without penalty within specified ranges that are determined in negotiations with our suppliers. These agreements depend in part on the type of materials purchased as well as the circumstances surrounding any requested cancellations.
In addition to the cash requirements presented above, we have various other accruals which are not included in the table above. For example, we owe our suppliers approximately $80.2 million for accounts payable and shipments in transit at the end of the fiscal year. We generally pay our suppliers in a range from 30 to 120 days depending on terms offered. These payments are financed by operating cash flows and our revolving line of credit.
24

We believe that cash flows generated from operations, factoring, leasing facilities, and funds available under the revolving credit facility will satisfy cash requirements for a period in excess of 12 months and into the foreseeable future.
Critical Accounting Policies and Estimates
Preparation of our consolidated financial statements requires management to make estimates and assumptions that affect the reported amount of assets, liabilities, revenues and expenses. Note 1 to our consolidated financial statements describes the significant accounting policies used in the preparation of our consolidated financial statements. Management believes the most complex and sensitive judgments, because of their significance to our consolidated financial statements, result primarily from the need to make estimates about effects of matters that are inherently uncertain. The most significant areas involving management judgments are described below. Actual results in these areas could differ from management’s estimates.
Revenue
The Company specializes in services ranging from product manufacturing to engineering and tooling services. Subsequent to the adoption of ASU 2014-09, Revenue from Contracts with Customers (Topic 606) during the year ended June 29, 2019, the first step in its process for revenue recognition is to identify the contract with a customer. A contract is defined as an agreement between two or more parties that creates enforceable rights and obligations. A contract can be written, oral, or implied. The Company generally enters into manufacturing service agreements (“MSA”) with its customers that outlines the terms of the business relationship between the customer and the Company. This includes matters such as warranty, indemnification, transfer of title and risk of loss, liability for excess and obsolete inventory, pricing, payment terms, etc. The Company will also bid on a program-by-program basis for customers in which an executed MSA may not be in place. In these instances, as well as when we have an MSA in place, we receive customer purchase orders for specific quantities and timing of products. As a result, the Company considers its contract with a customer to be the combination of the MSA and the purchase order. The transaction price is fixed and set forth in each purchase order. In the Company's normal course of business, there are no variable pricing components, or material amounts refunded to customers in the form of refunds or rebates.
The Company assesses whether control of the product or services promised under the contract is transferred to the customer at a point in time (shipment) or over time (as we manufacture the product). The Company is first required to evaluate whether its contracts meet the criteria for 'over-time' or 'point-in-time' recognition. The Company has determined that for the majority of its contracts the Company is manufacturing products for which there is no alternative use due to the unique nature of the customer-specific product, IP and other contract restrictions. Further, the Company has an enforceable right to payment including a reasonable profit for performance completed to date with respect to these contracts. As a result, revenue is recognized under these contracts 'over-time' based on the input cost-to-cost method as it better depicts the transfer of control. This input method is based on the ratio of costs incurred to date as compared to the total estimated costs at completion of the performance obligation. For all other contracts that do not meet these criteria, such as manufacturing contracts for which the terms do not provide an enforceable right to payment for performance completed to date, the Company recognizes revenue when it has transferred control of the related manufactured products which generally occurs upon shipment to the customer. Revenue from engineering services is recognized over time as the services are performed
Prior to the adoption of ASU 2014-09, Revenue from Contracts with Customers (Topic 606), sales revenue from manufacturing is recognized upon shipment of the manufactured product per contractual terms. Upon shipment, title transfers and the customer assumes risks and rewards of ownership of the product. The price to the buyer is fixed or determinable and recoverability is reasonably assured. Unless specifically stated in contractual terms, there are no formal customer acceptance requirements or further obligations related to the manufacturing services; if any such requirements exist, then sales revenue is recognized at the time when such requirements are completed and such obligations are fulfilled. Revenue is recorded net of estimated returns of manufactured product based on management’s analysis of historical returns. Revenues and associated costs from engineering design, development services and tooling, which are performed under contract of short term durations, are recognized only after the completed performance of the service.
25

Inactive, Obsolete, and Surplus Inventory Reserve
Inventories are stated at the lower of cost or net realizable value. Inventory valuation is determined using the first-in, first-out (FIFO) method. We reserve for inventories that we deem inactive, obsolete or surplus. This reserve is calculated based upon the demand for the products that we produce. Demand is determined by expected sales, customer purchase orders, or customer forecasts. If expected sales do not materialize, then we would have inventory in excess of our reserves and would have to charge the excess against future earnings. In the case where we have purchased material based upon a customer’s forecast or purchase orders, we are usually covered by lead-time assurance agreements or purchase orders with each customer. These contracts state that the financial liability for material purchased within agreed upon lead-time and based upon the customer’s forecasts, lies with the customer. If we purchase material outside the lead-time assurance agreement and the customer’s forecasts do not materialize or if we have no lead-time assurance agreement for a specific program, we would have the financial liability and may have to charge inactive, obsolete or surplus inventory against earnings. We also reserve for inventory related to specific customers covered by lead-time assurance agreements when those customers are experiencing financial difficulties or reimbursement is not reasonably assured.
Allowance for Doubtful Accounts
We value our accounts receivable net of an allowance for doubtful accounts. As of June 27, 2020, the allowance for doubtful accounts was approximately $609,000. As of June 29, 2019, the allowance for doubtful accounts was approximately $58,000. This allowance is based on estimates of the portion of accounts receivable that may not be collected in the future. The estimates used are based primarily on specific identification of potentially uncollectible accounts. Such accounts are identified using publicly available information in conjunction with evaluations of current payment activity. However, if any of our customers were to develop unexpected and immediate financial problems that would prevent payment of open invoices, we could incur additional and possibly material expenses that would negatively impact earnings.
Accrued Warranty
An accrual is made for expected warranty costs, with the related expense recognized in cost of goods sold. We review the adequacy of this accrual quarterly based on historical analysis and anticipated product returns and rework costs. Our warranty period for keyboards is generally longer than that for EMS products. We only warrant materials and workmanship on EMS products, and we do not warrant design defects for EMS customers.
Income Taxes
Income tax expense includes U.S. and international income taxes and a provisional estimate for U.S. taxes on undistributed earnings of foreign subsidiaries. We do not record foreign withholding taxes on undistributed earnings of international subsidiaries that are deemed to be permanently reinvested. Certain income and expenses are not reported in tax returns and financial statements in the same year. The tax effect of such temporary differences is reported as deferred income taxes. The deferred income taxes are classified as long-term assets or liabilities. The most significant areas involving management judgments include deferred income tax assets and liabilities, uncertain tax positions, and research and development tax credits. Our estimates of the realization of the deferred tax assets related to our tax credits are based upon our estimates of future taxable income which may change.
Stock-Based Compensation
Stock-based compensation is accounted for according to Financial Accounting Standards Board (FASB) Accounting Standards Codification (ASC) 718, Compensation—Stock Compensation. ASC 718 requires us to expense the fair value of employee stock options, stock appreciation rights and other forms of stock-based compensation. Under the fair value recognition provisions of ASC 718, share-based compensation cost is estimated at the grant date based upon the fair value of the award and is recognized as expense ratably over the requisite service period of the award (generally the vesting period). Determining the appropriate fair value model and calculating the fair value of share-based awards requires judgment, including estimating the expected life of the share-based award, the expected stock price volatility over the expected life of the share-based award and forfeitures.
26

To determine the fair value of stock based awards on the date of grant we use the Black-Scholes option-pricing model. Inherent in this model are assumptions related to expected stock price volatility, option life, risk-free interest rate and dividend yield. The risk-free interest rate is a less-subjective assumption as it is based on factual data derived from public sources. We use a dividend yield of zero as we have never paid cash dividends and have no intention to pay cash dividends in the foreseeable future. The expected stock price volatility and option life assumptions require a greater level of judgment. Our expected stock-price volatility assumption is based upon the historical volatility of our stock which is obtained from public data sources. The expected life represents the weighted average period of time that share-based awards are expected to be outstanding, giving consideration to vesting schedules and historical exercise patterns. We determine the expected life assumption based upon the exercise and post-vesting behavior that has been exhibited historically, adjusted for specific factors that may influence future exercise patterns. If expected volatility or expected life were to increase, that would result in an increase in the fair value of our stock options which would result in higher compensation charges, while a decrease in volatility or the expected life would result in a lower fair value of our stock option awards resulting in lower compensation charges.
We estimate forfeitures for all of our awards based upon historical experience of stock-based pre-vesting forfeitures. We believe that our estimates are based upon outcomes that are reasonably likely to occur. If actual forfeitures are higher than our estimates it would result in lower compensation expense and to the extent the actual forfeitures are lower than our estimate we would record higher compensation expense.
Impairment of Long-Lived Assets
Long-lived assets, such as property, plant, and equipment are reviewed for impairment whenever events or changes in circumstances indicate that the carrying amount of an asset may not be recoverable. The recoverability of assets to be held and used is measured by a comparison of the carrying amount of an asset to the estimated undiscounted future cash flows expected to be generated by the asset. If the carrying amount of an asset exceeds its estimated undiscounted future cash flows, an impairment charge would be recognized in the amount by which the carrying amount of the asset exceeds the fair value of the asset.
Derivatives and Hedging Activity
Derivatives are recognized on the balance sheet at their estimated fair value. On the date a derivative contract is entered into, the Company designates the derivative as a hedge of a forecasted transaction or of the variability of cash flows to be received or paid related to a recognized asset or liability (a “cash flow” hedge). The Company does not enter into derivatives for speculative purposes. Changes in the fair value of a derivative that qualifies as a cash flow hedge are recorded in “Accumulated Other Comprehensive Income,” until earnings are affected by the variability of cash flows. See Note 10 of the Company’s consolidated financial statements for additional information.
Long-Term Incentive Compensation Accrual
Long-term incentive compensation is recognized as expense ratably over the requisite service period of the award which is generally three years. The Board of Directors approve target performance measures for the three year period for each of the Company’s officers and non-employee Directors. Performance measures are based on a combination of sales growth targets and return on invested capital targets. No cash awards will be made to participants if actual Company performance does not exceed the minimum target performance measures. The calculation used to determine the necessary accrual uses a combination of actual results and projected results. We believe that our estimates are based upon outcomes that are reasonably likely to occur. These estimates and assumptions are based on historical results as well as future expectations. Actual results could vary from our estimates and assumptions.
27

Impairment of Goodwill
In accordance with ASC 350, Goodwill and Other Intangible Assets, goodwill is not amortized but is required to be reviewed for impairment at least annually or when events or circumstances indicate that carrying value may exceed fair value. The Company is permitted the option to first assess qualitative factors to determine whether the existence of events and circumstances indicates that it is more likely than not that the fair value of any reporting unit is less than its corresponding carrying value. If, after assessing the totality of events and circumstances, the Company concludes that it is not more likely than not that the fair value of any reporting unit is less than its corresponding carrying value then the Company is not required to take further action. However, if the Company concludes otherwise, then it is required to perform a quantitative impairment test, including computing the fair value of the reporting unit and comparing that value to its carrying value. The Company utilizes a weighting of the income approach and a market approach in the impairment test. We also consider valuation factors including the Company's market capitalization, future discounted cash flows and an estimated control premium based upon a review of comparable market transactions. Our consideration of discounted future cash flows included assumptions regarding growth rates and margins based on our historical trends. In addition, we applied a market discount rate calculated based upon an analysis of companies similar in size. If our future cash flows do not meet our projections or there is an event that impacts our market capitalization, the assumptions used in our goodwill analysis could be negatively impacted.
Goodwill impairment would be measured as the amount by which a reporting unit’s carrying value exceeds its fair value, not to exceed the carrying value of goodwill. In the event that goodwill is impaired, an impairment charge to earnings would become necessary. The Company also has the option to bypass the qualitative assessment for goodwill in any period and proceed directly to performing the quantitative impairment test. Refer to footnote 14 for discussion of the write-off of goodwill and other intangibles that occurred during fiscal year 2019, as a result of certain triggering events being present.
New and Future Accounting Pronouncements
See Note 1 to our consolidated financial statements.
28

Item 7A: QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK
Interest Rate Risk
We are subject to the risk of fluctuating interest rates in the normal course of business. Our major market risk relates to our secured debt. Our revolving credit facility, term loan and equipment term loan are secured by substantially all of our assets. The interest rates applicable to our revolving credit facility and term loans fluctuate with the Wells Fargo Bank prime rate and LIBOR rates. There was outstanding $60.1 million in borrowings under our revolving credit facility and $10.9 million outstanding on our term loans as of June 27, 2020. See “Management’s Discussion and Analysis of Financial Condition and Results of Operations – Capital Resources and Liquidity” and Note 4 – “Long-Term Debt” to the Consolidated Financial Statements for additional information regarding our revolving credit facility and term loans.
During the second quarter of fiscal year 2020, we entered into an interest rate swap contract with a notional amount of $15.0 million related to the borrowings outstanding under the revolving credit facility. During the second quarter of fiscal year 2020, we also entered into an interest rate swap contract with a notional amount of $11.7 million related to the borrowings outstanding under the term loan. As of June 27, 2020, the remaining notional amount of the interest rate swap contract related to the term loan was $11.7 million. Through the use of the interest rate swap, as described above, we fixed the basis on which we pay interest, thus eliminating much of our interest rate risk. See Note 10 – “Derivative Financial Instruments” to the Consolidated Financial Statements for additional information regarding our derivative instruments.
Foreign Currency Exchange Risk
A significant portion of our operations are in foreign locations. As a result, transactions occur in currencies other than the U.S. dollar. Exchange rate fluctuations among other currencies used by us would directly or indirectly affect our financial results. We currently use Mexican peso forward contracts and swaps to hedge foreign currency fluctuations for a portion of our Mexican peso denominated expenses. There was $36.7 million of foreign currency forward contracts and swaps outstanding as of June 27, 2020. The fair value of these contracts and swaps was approximately $(0.9) million. See Note 10 – “Derivative Financial Instruments” to the Consolidated Financial Statements for additional information regarding our derivative instruments.
29

Item 8:
FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA
Report of Independent Registered Public Accounting Firm

Shareholders and Board of Directors
Key Tronic Corporation
Spokane Valley, Washington
Opinion on the Consolidated Financial Statements
We have audited the accompanying consolidated balance sheets of Key Tronic Corporation (the “Company”) as of June 27, 2020 and June 29, 2019, the related consolidated statements of income (loss), comprehensive income (loss), shareholders’ equity, and cash flows for each of the three years in the period ended June 27, 2020, and the related notes and schedule (collectively referred to as the “consolidated financial statements”). In our opinion, the consolidated financial statements present fairly, in all material respects, the financial position of the Company at June 27, 2020 and June 29, 2019, and the results of its operations and its cash flows for each of the three years in the period ended June 27, 2020, in conformity with accounting principles generally accepted in the United States of America.
We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States) (“PCAOB”), the Company's internal control over financial reporting as of June 27, 2020, based on criteria established in Internal Control - Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission (“COSO”) and our report dated September 11, 2020 expressed an unqualified opinion thereon.

Change in Accounting Principles

As discussed in Note 1 to the consolidated financial statements, the Company has changed its accounting method for accounting for leases in fiscal year 2020 due to the adoption of Topic 842: Leases, using a modified retrospective approach, and as discussed in Note 1 to the consolidated financial statements, the Company changed its method for recognizing revenue in fiscal year 2019 due to the adoption of Topic 606: Revenue from Contracts with Customers.
Basis for Opinion
These consolidated financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on the Company’s consolidated financial statements based on our audits. We are a public accounting firm registered with the PCAOB and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.
We conducted our audits in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the consolidated financial statements are free of material misstatement, whether due to error or fraud.
Our audits included performing procedures to assess the risks of material misstatement of the consolidated financial statements, whether due to error or fraud, and performing procedures that respond to those risks. Such procedures included examining, on a test basis, evidence regarding the amounts and disclosures in the consolidated financial statements. Our audits also included evaluating the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the consolidated financial statements. We believe that our audits provide a reasonable basis for our opinion.
 
/s/ BDO USA, LLP
We have served as the Company's auditor since 2003
Spokane, Washington
September 11, 2020
30

KEY TRONIC CORPORATION AND SUBSIDIARIES
CONSOLIDATED BALANCE SHEETS
(In thousands)
June 27, 2020 June 29, 2019
ASSETS
Current assets:
Cash and cash equivalents $ 553  $ 601 
Trade receivables, net of allowance for doubtful accounts of $609 and $58 86,123  58,429 
Contract assets 23,753  22,161 
Inventories, net 115,020  100,431 
Other 17,315  16,477 
Total current assets 242,764  198,099 
Property, plant and equipment, net 31,764  29,413 
Operating lease right-of-use assets, net 17,568  — 
Other assets:
Deferred income tax asset 10,178  7,840 
Other intangible assets, net —  657 
Other 2,587  2,301 
Total other assets 12,765  10,798 
Total assets $ 304,861  $ 238,310 
LIABILITIES AND SHAREHOLDERS’ EQUITY
Current liabilities:
Accounts payable $ 80,204  $ 73,571 
Accrued compensation and vacation 10,428  6,759 
Current portion of debt, net 7,508  5,841 
Other 14,079  7,233 
Total current liabilities 112,219  93,404 
Long-term liabilities:
Term loans 3,258  7,091 
Revolving loan 60,094  23,356 
Operating lease liabilities 12,624  — 
Deferred income tax liability 234  — 
Other long-term obligations 875  — 
Total long-term liabilities 77,085  30,447 
Total liabilities 189,304  123,851 
Commitments and contingencies (Note 4 and 9)
Shareholders’ equity:
Common stock, no par value—shares authorized 25,000; issued and outstanding 10,760 and 10,760 shares, respectively 46,946  46,680 
Retained earnings 70,111  65,353 
Accumulated other comprehensive (loss) income (1,500) 2,426 
Total shareholders’ equity 115,557  114,459 
Total liabilities and shareholders’ equity $ 304,861  $ 238,310 
See accompanying notes to consolidated financial statements.
31

KEY TRONIC CORPORATION AND SUBSIDIARIES
CONSOLIDATED STATEMENTS OF INCOME (LOSS)
(In thousands, except per share amounts)
 
  Fiscal Year Ended
  June 27, 2020 June 29, 2019 June 30, 2018
Net sales $ 449,480  $ 464,044  $ 446,322 
Cost of sales 414,231  429,443  412,153 
Gross profit 35,249  34,601  34,169 
Research, development and engineering expenses 7,391  6,555  6,186 
Selling, general and administrative expenses 21,030  21,556  22,334 
Impairment of goodwill and intangibles —  12,448  — 
Loss on settlement of arbitration —  —  4,535 
Total operating expenses 28,421  40,559  33,055 
Operating income (loss) 6,828  (5,958) 1,114 
Interest expense, net 2,509  2,782  2,556 
Income (loss) before income taxes 4,319  (8,740) (1,442)
Income tax benefit (439) (758) (117)
Net income (loss) $ 4,758  $ (7,982) $ (1,325)
Net income (loss) per share — Basic $ 0.44  $ (0.74) $ (0.12)
Weighted average shares outstanding — Basic 10,760  10,760  10,760 
Net income (loss) per share — Diluted $ 0.44  $ (0.74) $ (0.12)
Weighted average shares outstanding — Diluted 10,816  10,760  10,760 
See accompanying notes to consolidated financial statements.
32

KEY TRONIC CORPORATION AND SUBSIDIARIES
CONSOLIDATED STATEMENTS OF COMPREHENSIVE INCOME (LOSS)
(In thousands)
 
  Fiscal Year Ended
  
June 27, 2020 June 29, 2019 June 30, 2018
Comprehensive income (loss):
Net income (loss) $ 4,758  $ (7,982) $ (1,325)
Other comprehensive income (loss):
Unrealized gain (loss) on hedging instruments, net of tax (3,926) 3,395  2,392 
Comprehensive income (loss) $ 832  $ (4,587) $ 1,067 

Other comprehensive income (loss) for fiscal years 2020, 2019, and 2018 is reflected net of tax provision (benefit) of approximately $(1.1) million, $1.0 million and $0.7 million, respectively.
See accompanying notes to consolidated financial statements.
33

KEY TRONIC CORPORATION AND SUBSIDIARIES
CONSOLIDATED STATEMENTS OF CASH FLOWS
(In thousands)
  Fiscal Year Ended
  June 27, 2020 June 29, 2019 June 30, 2018
Operating activities:
Net income (loss) $ 4,758  $ (7,982) $ (1,325)
Adjustments to reconcile net income (loss) to cash provided by (used in) operating activities:
Goodwill and intangible assets impairment —  12,448  — 
Depreciation and amortization 5,591  7,298  7,774 
Amortization of deferred loan costs 30  30  30 
Provision for obsolete inventory 136  91  31 
Provision for warranty 121  83  74 
Provision for (recovery of) doubtful accounts 551  58  (84)
Loss on disposal of assets 207  3  20 
Share-based compensation expense 266  436  447 
Deferred income taxes (958) (1,116) (1,562)
Loss on settlement of arbitration —  —  4,535 
Changes in operating assets and liabilities
Trade receivables (28,254) 3,344  (1,327)
Contract assets (1,592) (10,255) — 
Cash received from arbitration settlement —  6,684  — 
Inventories (14,725) (1,417) (18,101)
Other assets (7,728) (4,490) (10,461)
Accounts payable 6,632  (2,627) 22,920 
Accrued compensation and vacation 3,669  (1,346) (1,900)
Other liabilities 292  (323) 2,051 
Cash provided by (used in) operating activities (31,004) 919  3,122 
Investing activities:
Purchases of property and equipment (8,623) (8,386) (4,523)
Proceeds from sale of fixed assets 696  22  1,041 
Cash receipts from deferred purchase price of factored receivables 4,350  6,455  8,335 
Cash provided by (used in) investing activities (3,577) (1,909) 4,853 
Financing activities:
Payment of financing costs (84) (15) (21)
Proceeds from issuance of long term debt 5,000  —  — 
Repayments of long term debt (7,121) (5,871) (5,871)
Borrowings under revolving credit agreement 177,343  181,688  187,419 
Repayments of revolving credit agreement (140,605) (174,554) (189,532)
Cash provided by (used in) financing activities 34,533  1,248  (8,005)
Net increase (decrease) in cash and cash equivalents (48) 258  (30)
Cash and cash equivalents, beginning of period 601  343  373 
Cash and cash equivalents, end of period $ 553  $ 601  $ 343 
Supplemental cash flow information:
Interest payments $ 2,483  $ 2,773  $ 2,529 
Income tax payments, net of refunds $ 683  $ (511) $ 304 
See accompanying notes to consolidated financial statements.
34

KEY TRONIC CORPORATION AND SUBSIDIARIES
CONSOLIDATED STATEMENT OF SHAREHOLDERS’ EQUITY
(In thousands)
 
Shares Common
Stock 		Retained
Earnings 		Accumulated
Other
Comprehensive
Income (Loss) 		Total
Shareholders’
Equity
Balances, July 1, 2017 10,760  $ 45,797  $ 73,545  $ (2,775) $ 116,567 
Net loss —  —  (1,325) —  (1,325)
Tax rate effect reclassification —  —  586  (586) — 
Unrealized gain on hedging instruments, net —  —  —  2,392  2,392 
Share-based compensation —  447  —  —  447 
Balances, June 30, 2018 10,760  $ 46,244  $ 72,806  $ (969) $ 118,081 
Net loss —  —  (7,982) —  (7,982)
ASC 606 opening balance sheet adjustment —  —  529  —  529 
Unrealized gain on hedging instruments, net —  —  —  3,395  3,395 
Share-based compensation —  436  —  —  436 
Balances, June 29, 2019 10,760  $ 46,680  $ 65,353  $ 2,426  $ 114,459 
Net income —  —  4,758  —  4,758 
Unrealized loss on hedging instruments, net —  —  —  (3,926) (3,926)
Share-based compensation —  266  —  —  266 
Balances, June 27, 2020 10,760  $ 46,946  $ 70,111  $ (1,500) $ 115,557 
See accompanying notes to consolidated financial statements.
35

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
1. SIGNIFICANT ACCOUNTING POLICIES
Business
Key Tronic Corporation and subsidiaries (the Company) is engaged in electronic manufacturing services (EMS) for original equipment manufacturers (OEMs) and also manufactures keyboards and other input devices. The Company’s headquarters are located in Spokane Valley, Washington with manufacturing operations in Oakdale, Minnesota; Fayetteville, Arkansas; Corinth, Mississippi; and foreign manufacturing operations in Juarez, Mexico; Shanghai, China; and Da Nang, Vietnam.
The 2019 novel strain of coronavirus ("COVID-19") has resulted in business slowdowns or shutdowns in affected areas. In January 2020, the Company’s China facilities faced temporary shutdowns as a result of government mandates. In March 2020, these facilities began returning to full operation and the supply chain disruptions have been abating. In April 2020, the Company announced the temporary closure of its Juarez facilities, however, operations successfully resumed six days later.
Due to the COVID-19 pandemic, the Company has seen extreme shifts in demand from its customer base. The possibility of future temporary closures, as well as adverse fluctuations in customer demand, freight and expedite costs, precautionary safety expenses, collectibility of accounts, and future supply chain disruptions during the rapidly changing COVID-19 environment can materially impact operating results. Additionally, continued adverse macroeconomic conditions and significant currency exchange fluctuations can also materially impact operating results.
Reclassifications
Certain prior period reclassifications were made to conform with the current period presentation. These reclassifications had no effect on reported income, comprehensive income, cash flows, total assets, or shareholders’ equity as previously reported.
Principles of Consolidation
The consolidated financial statements include the Company and its wholly owned subsidiaries in the United States, Mexico, China and Vietnam. Intercompany balances and transactions have been eliminated during consolidation.
Use of Estimates
The preparation of financial statements in conformity with accounting principles generally accepted in the United States of America requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities, disclosure of contingent assets and liabilities at the date of the financial statements, and the reported amounts of revenues and expenses during the reporting period. Estimates include the allowance for doubtful receivables, the provision for obsolete and non-saleable inventories, deferred tax assets and liabilities, uncertain tax positions, valuation of goodwill, impairment of long-lived assets, medical self-funded insurance liability, long-term incentive compensation accrual, the provision for warranty costs, the fair value of stock appreciation rights granted under the Company’s share-based compensation plan and purchase price allocation of acquired businesses. Due to uncertainties with respect to the assumptions and estimates, actual results could differ from those estimates.
Cash and Cash Equivalents
The Company considers investments with an original maturity of three months or less to be cash equivalents. Cash equivalents are carried at cost, which approximates fair value. The Company may have cash and cash equivalents at financial institutions that are in excess of federally insured limits from time to time.
Allowance for Doubtful Accounts
The Company evaluates the collectability of accounts receivable and records an allowance for doubtful accounts, which reduces the receivables to an amount that management reasonably estimates will be collected. A specific allowance is recorded against receivables considered to be impaired based on the Company’s knowledge of the financial condition of the customer. In determining the amount of the allowance, the Company considers several factors including the aging of the receivables, the current business environment and historical experience. After all attempts to collect a receivable have failed, the receivable is written off against the allowance.
36

Inventories
Inventories are stated at the lower of cost or net realizable value. Inventory valuation is determined using the first-in, first-out (FIFO) method. Customer orders are based upon forecasted quantities of product manufactured for shipment over defined periods. Raw material inventories are purchased to fulfill these customer requirements. Within these arrangements, customer demands for products frequently change, sometimes creating excess and obsolete inventories. The Company regularly reviews raw material inventories by customer for both excess and obsolete quantities. Wherever possible, the Company attempts to recover its full cost of excess and obsolete inventories from customers or, in some cases, through other markets. When it is determined that the Company’s carrying cost of such excess and obsolete inventories cannot be recovered in full, a charge is taken against income for the difference between the carrying cost and the estimated realizable amount. We also reserve for inventory related to specific customers covered by lead-time assurance agreements when those customers are experiencing financial difficulties or reimbursement is not reasonably assured.
Property, Plant and Equipment
Property, plant and equipment are carried at cost and depreciated using straight-line methods over the expected useful lives of the assets. Repairs and maintenance costs are expensed as incurred.
Impairment of Goodwill
In accordance with accounting guidance on goodwill and other intangible assets, the Company evaluates goodwill for impairment at the reporting unit level annually, and whenever circumstances occur indicating that goodwill might be impaired. Upon adoption of ASU 2017-04, the Company now recognizes an impairment charge (not to exceed the total amount of goodwill allocated to the reporting unit) for the amount by which the carrying amount of a reporting unit exceeds the reporting unit’s fair value. During the third quarter of fiscal year 2019, a few large programs declined in revenue and two new programs were delayed. This decrease in the Company’s total revenue combined with book value continuing to exceed market capitalization caused a “triggering event” in which to perform a quantitative impairment analysis as of March 30, 2019. To estimate the fair value of the Company’s equity, the Company used both a market approach and an income approach, based on a discounted cash flows analysis. As of March 30, 2019, market related factors increased expected required rates of return, which also increased the Company’s discount rate used to project future cash flows. Further, push outs of the Company’s forecasted future cash flows relating to delays in customer orders adversely impacted the Company’s discounted cash flows model. As a result, a lower estimate in the Company’s fair value using these two valuation methods indicated an impairment charge.
During the third quarter of fiscal year 2019, the Company also assessed other finite-lived intangible assets including the Company’s customer relationships and favorable lease agreements due to an indicator of possible impairment being present, as discussed above. As a result of the analysis performed, the Company determined that the carrying value of the customer relationships intangible asset was not recoverable and recorded an impairment for the entire carrying amount during the third quarter of fiscal year 2019. The Company’s analysis did not indicate that any of its other long-lived assets were impaired. Refer to footnote 14 for impairment analysis for goodwill and other intangibles that occurred during fiscal year 2019, as a result of certain triggering events being present.
Impairment of Long-lived Assets
The Company, using its best estimates based on reasonable and supportable assumptions and projections, reviews assets for impairment whenever events or changes in circumstances have indicated that the carrying amount of its assets might not be recoverable. Impaired assets are reported at the lower of cost or fair value.
Accrued Warranty
An accrual is made for expected warranty costs, with the related expense recognized in cost of goods sold. Management reviews the adequacy of this accrual quarterly based on historical analyses and anticipated product returns.
Self-funded Insurance
The Company self-funds its domestic employee health plans. The Company contracts with a separate administrative service company to supervise and administer the programs and act as its representative. The Company reduces its risk under this self-funded platform by purchasing stop-loss insurance coverage for high dollar individual claims. In addition, if the aggregate annual claims amount to more than 125 percent of expected claims for the plan year this insurance will also pay those claims amounts exceeding that level.
The Company estimates its exposure for claims incurred but not paid at the end of each reporting period and uses historical claims data supplied by the Company’s broker to estimate its self-funded insurance liability. This liability is subject to a total limitation that varies based on employee enrollment and factors that are established at each annual contract renewal. Actual claims experience may differ from the Company’s estimates. Costs related to the administration of the plan and related claims are expensed as incurred.
37

Revenue Recognition
Prior to the adoption of ASU 2014-09, Revenue from Contracts with Customers (Topic 606), sales revenue from manufacturing is recognized upon shipment of the manufactured product per contractual terms. Upon shipment, title transfers and the customer assumes risks and rewards of ownership of the product. The price to the buyer is fixed or determinable and recoverability is reasonably assured. Unless specifically stated in contractual terms, there are no formal customer acceptance requirements or further obligations related to the manufacturing services; if any such requirements exist, then sales revenue is recognized at the time when such requirements are completed and such obligations are fulfilled. Revenue is recorded net of estimated returns of manufactured product based on management’s analysis of historical returns.
Subsequent to the adoption of ASU 2014-09, Revenue from Contracts with Customers (Topic 606) during the year ended June 29, 2019, the first step in its process for revenue recognition is to identify the contract with a customer. A contract is defined as an agreement between two or more parties that creates enforceable rights and obligations. A contract can be written, oral, or implied. The Company generally enters into manufacturing service agreements (“MSA”) with its customers that outlines the terms of the business relationship between the customer and the Company. This includes matters such as warranty, indemnification, transfer of title and risk of loss, liability for excess and obsolete inventory, pricing, payment terms, etc. The Company will also bid on a program-by-program basis for customers in which an executed MSA may not be in place. In these instances, as well as when we have an MSA in place, we receive customer purchase orders for specific quantities and timing of products. As a result, the Company considers its contract with a customer to be the combination of the MSA and the purchase order. The transaction price is fixed and set forth in each purchase order. In the Company's normal course of business, there are no variable pricing components, or material amounts refunded to customers in the form of refunds or rebates.
The Company assesses whether control of the product or services promised under the contract is transferred to the customer at a point in time (shipment) or over time (as we manufacture the product). The Company is first required to evaluate whether its contracts meet the criteria for 'over-time' or 'point-in-time' recognition. The Company has determined that for the majority of its contracts the Company is manufacturing products for which there is no alternative use due to the unique nature of the customer-specific product, IP and other contract restrictions. The Company has an enforceable right to payment including a reasonable profit for performance completed to date with respect to these contracts. As a result, revenue is recognized under these contracts 'over-time' based on the input cost-to-cost method as it better depicts the transfer of control. This input method is based on the ratio of costs incurred to date as compared to the total estimated costs at completion of the performance obligation. For all other contracts that do not meet these criteria, such as manufacturing contracts for which the terms do not provide an enforceable right to payment for performance completed to date, the Company recognizes revenue when it has transferred control of the related manufactured products which generally occurs upon shipment to the customer. Revenue from engineering services is recognized over time as the services are performed.
Shipping and Handling Fees
The Company classifies costs associated with shipping and handling fees as a component of cost of goods sold. Customer billings related to shipping and handling fees are reported as revenue.
Research, Development and Engineering
Research, development and engineering expenses include unreimbursed EMS costs as well as design and engineering costs associated with the production of EMS programs. Research, development and engineering costs are expensed as incurred.
Income Taxes
Income taxes are accounted for under the asset and liability method. Deferred tax assets and liabilities are recognized for the estimated future tax consequences and benefits attributable to differences between the financial statement carrying amounts of existing assets and liabilities and their respective tax bases, as well as tax credit carryforwards. Deferred tax assets and liabilities are measured using enacted tax rates expected to apply to taxable income in the years in which temporary differences and carryforwards are expected to be recovered or settled. The effect on deferred tax assets and liabilities for a change in tax rates is recognized in the period that includes the enactment date. Valuation allowances are established when necessary to reduce deferred tax assets to the amount that is more likely than not to be realized.
38

We utilize a two-step approach to recognizing and measuring uncertain tax positions. The first step is to evaluate the tax position for recognition by determining if the weight of available evidence indicates it is more likely than not that the position will be sustained on audit, including resolution of related appeals or litigation processes, if any. The second step is to measure the tax benefit as the largest amount which is more than 50% likely of being realized upon ultimate settlement. We consider many factors when evaluating and estimating our tax positions and tax benefits, which may require periodic adjustments based on new assessments and changes in estimates and which may not accurately forecast actual outcomes. Our policy is to recognize interest and penalties related to the underpayment of income taxes as a component of income tax provision. To date, we have not incurred charges for interest or penalties in relation to the underpayment of income taxes. The tax years 1997 through the present remain open to examination by the major U.S. taxing jurisdictions to which we are subject. Refer to Note 6 for further discussions.
Derivative Instruments and Hedging Activities
The Company has entered into foreign currency forward contracts and an interest rate swap which are accounted for as cash flow hedges in accordance with ASC 815, Derivatives and Hedging. The effective portion of the gain or loss on the derivative is reported as a component of accumulated other comprehensive income (AOCI) and is reclassified into earnings in the same period in which the underlying hedged transaction affects earnings. The derivative’s effectiveness represents the change in fair value of the hedge that offsets the change in fair value of the hedged item.
The Company uses derivatives to manage the variability of foreign currency fluctuations of expenses in our Mexico facilities. The foreign currency forward contracts and interest rate swaps have terms that are matched to the underlying transactions being hedged. As a result, these transactions fully offset the hedged risk and no ineffectiveness has been recorded.
The Company’s foreign currency forward contracts and interest rate swaps potentially expose the Company to credit risk to the extent the counterparties may be unable to meet the terms of the agreement. The Company minimizes such risk by seeking high quality counterparties. The Company’s counterparties to the foreign currency forward contracts and interest rate swaps are major banking institutions. These institutions do not require collateral for the contracts, and the Company believes that the risk of the counterparties failing to meet their contractual obligations is remote. The Company does not enter into derivative instruments for trading or speculative purposes.
Earnings Per Common Share
Basic earnings per common share is computed by dividing net income by the weighted average number of common shares outstanding during the period. Diluted earnings per common share is computed by dividing net income by the combination of other potentially dilutive weighted average common shares and the weighted average number of common shares outstanding during the period using the treasury stock method. The computation assumes the proceeds from the exercise of stock options were used to repurchase common shares at the average market price during the period. The computation of diluted earnings per common share does not assume conversion, exercise, or contingent issuance of common stock equivalent shares that would have an anti-dilutive effect on earnings per share.
Foreign Currency Transactions
The functional currency of the Company’s subsidiaries in Mexico and China is the U.S. dollar. Realized foreign currency transaction gains and losses for local currency denominated assets and liabilities are included in cost of goods sold.
Fair Value of Financial Instruments
The carrying values of cash and cash equivalents, accounts receivable, current liabilities, and non current operating lease liability are reflected on the balance sheets at June 27, 2020 and June 29, 2019, reasonably approximate their fair value. The Company had an outstanding balance on the line of credit of $60.1 million as of June 27, 2020 and $23.4 million as of June 29, 2019, with a carrying value that reasonably approximates the fair value. The Company had an outstanding balance on the term loan of $10.0 million as of June 27, 2020 and $11.3 million as of June 29, 2019, with a carrying value that reasonably approximates the fair value. The equipment term loan is estimated to be $0.9 million as of June 27, 2020 and $1.7 million as of June 29, 2019, with a carrying value that reasonably approximates the fair value.
Share-based Compensation
The Company’s incentive plan may provide for equity and liability awards to employees in the form of stock options, stock appreciation rights, restricted stock, restricted stock units, stock awards, stock units, performance shares, performance units, and other stock-based or cash-based awards. Compensation cost is recognized on a straight-line basis over the requisite employee service period, which is generally the vesting period, and is included in cost of goods sold, research, development and engineering, and selling, general, and administrative expenses. Share-based compensation is recognized only for those awards that are expected to vest, with forfeitures estimated at the date of grant based on historical experience and future expectations.
39

Newly Adopted and Recent Accounting Pronouncements
In December 2019, the FASB issued ASU 2019-12, Simplifying the Accounting for Income Taxes (Topic 740), which modifies certain provisions of ASC 740, Income Taxes, in an effort to reduce the complexity of accounting for income taxes. ASU 2019-12 is effective for us the first quarter of fiscal year 2022. We are currently evaluating the effects and do not believe this standard will have a material impact on our consolidated financial position, results of operations, or cash flows.
In June 2018, the FASB issued ASU 2018-07 "Compensation - Stock Compensation (Topic 718): Improvement to Nonemployee Share-Based Payment Accounting" with the objective of simplifying several aspects of the accounting for nonemployee share-based payment transactions in current GAAP. The Company adopted this guidance during the first quarter of fiscal year 2020 with an immaterial impact on its consolidated financial statements.
In August 2017, the FASB issued ASU 2017-12 "Derivatives and Hedging (Topic 815): Targeted Improvements to Accounting for Hedging Activities" with the objective of improving the financial reporting of hedging relationships and simplifying the application of the hedge accounting guidance in current GAAP. The Company adopted this guidance during the first quarter of fiscal year 2020 with no impact on its consolidated financial statements.
In February 2016, the FASB issued Accounting Standards Update ASU 2016-02, Leases which supersedes ASC 840 Leases and creates a new topic, ASC 842 Leases. This update requires lessees to recognize a lease asset and a lease liability for all leases, including operating leases, with a term greater than 12 months on its balance sheet. The update also expands the required quantitative and qualitative disclosures surrounding leases.
The Company adopted ASC 842 on June 30, 2019 using the modified retrospective method for leases existing at June 30, 2019. As a result, the Company was not required to adjust its comparative period financial information for effects of the standard or make the new required lease disclosures for periods before our adoption date. Management elected the package of practical expedients which, among other things, allows the Company to carry forward historical lease classification in place prior to June 30, 2019. ASC 842 also provides practical expedients for an entity’s accounting after transition. Management has elected the short-term lease recognition exemption for all leases that qualify, as well as the practical expedient to not separate lease and non-lease components. Both of these expedients were elected for all classes of underlying leased assets. As the Company cannot determine the interest rate implicit in the lease for its leases, the Company uses its estimate of the incremental borrowing rate as of the commencement date in determining the present value of lease payments. The Company’s estimated incremental borrowing rate is the rate of interest it would have to pay on a collateralized basis over a similar term in an amount equal to the lease payments in a similar economic environment. The lease term for all of the Company’s leases includes the noncancellable period of the lease plus any additional periods covered by either an option to extend (or not to terminate) the lease that the Company is reasonably certain to exercise.

The adoption of ASC 842 had a material impact to the Company’s consolidated balance sheet, but did not materially impact the consolidated statement of income or consolidated statement of cash flows. The most significant changes to the consolidated balance sheet relate to the recognition of new right-of-use (ROU) assets and lease liabilities for operating leases.

As a result of adopting ASC 842 as of June 30, 2019, the Company recognized an ROU asset of $21.4 million, a corresponding lease liability of $20.4 million, a reduction in prepaid rent of $0.4 million, a reduction of favorable lease agreement intangible of $0.7 million, and no adjustment to retained earnings or future P&L impact.

In June 2016, the FASB issued ASU 2016-13 “Financial Instruments - Credit Losses (Topic 326): Measurement of Credit Losses on Financial Instruments” and also issued subsequent amendments to the initial guidance: ASU 2018-19, ASU 2019-04 and ASU 2019-05, which replaces the existing incurred loss impairment model with an expected credit loss model and requires a financial asset measured at amortized cost to be presented at the net amount expected to be collected. The guidance is effective for the Company beginning in the first quarter of fiscal year 2024 with early adoption permitted. The Company is currently assessing the impact on its consolidated financial statements, and it intends to adopt the guidance when it becomes effective in the first quarter of fiscal year 2024.

The Company adopted Accounting Standards Update 2014-09 (ASU 2014-09), Revenue from Contracts with Customers (Topic 606) (also referred to as Accounting Standard Codification 606 (“ASC 606”) on July 1, 2018 using the modified retrospective approach by applying the guidance to all open contracts at the adoption date and has implemented revised accounting policies, new operational and financial reporting processes, enhanced systems capabilities and relevant internal controls. As part of adopting ASC 606, revenue for certain customer contracts where the Company is manufacturing products for which there is no alternative use and the Company has an enforceable right to payment including a reasonable profit for work-in-progress inventory will be recognized over time instead of upon shipment of products.
40

The cumulative effect of change made to our July 1, 2018 consolidated balance sheet for the adoption of ASC 606 was as follows:
Consolidated Balance Sheet Impact of Adopting ASC 606
(Unaudited, in thousands) Balance at June 30, 2018 Adjustments Balance at July 1, 2018
ASSETS
Contract assets —  11,906  11,906 
Inventories 110,315  (11,210) 99,105 
Deferred income tax asset 7,882  (167) 7,715 
LIABILITIES AND SHAREHOLDERS’ EQUITY
Retained earnings 72,806  529  73,335 

The following tables summarize the impacts of ASC 606 adoption on the Company’s consolidated balance sheets and consolidated statements of income (loss):

Consolidated Balance Sheet
As of June 29, 2019 Impact of Adopting ASC 606
(Unaudited, in thousands) As Reported 606 Adjustment Balance without 606 Adoption
ASSETS
Contract assets 22,161  (22,161) — 
Inventories 100,431  19,563  119,994 
Deferred income tax asset 7,840  167  8,007 
LIABILITIES AND SHAREHOLDERS’ EQUITY
Retained earnings 65,353  2,431  62,922 


Consolidated Statement of Income (Loss)
Impact of Adopting ASC 606
(Unaudited, in thousands) Twelve Months Ended June 29, 2019
As Reported 606 Adjustment Balance without 606 Adoption
Net sales $ 464,044  $ 10,254  $ 453,790 
Cost of sales $ 429,443  $ 8,353  $ 421,090 
Gross profit $ 34,601  $ 1,901  $ 32,700 
Net income $ (7,982) $ 1,901  $ (9,883)

For the fiscal year ended June 29, 2019, the reported revenue and gross profit was approximately $464.0 million, and $34.6 million; respectively. This reflects the adoption of ASC 606 as revenue and gross profit would have been $10.3 million and $1.9 million less without ASC 606 adoption; respectively. This is primarily due to the change from 'point-in-time' to 'over-time' recognition as the standard requires. There was not a material tax impact for the twelve months ended June 29, 2019 from adopting ASC 606.

Fiscal Year
The Company operates on a 52/53 week fiscal year. Fiscal years end on the Saturday nearest June 30. As such, fiscal years 2020, 2019, and 2018, ended on June 27, 2020, June 29, 2019, and June 30, 2018, respectively. Fiscal year 2020, 2019 and 2018 were all 52 week years.

41

2. INVENTORIES
The components of inventories consist of the following (in thousands):
 
June 27, 2020 June 29, 2019
Finished goods $ 15,269  $ 11,969 
Work-in-process 17,390  11,705 
Raw materials and supplies 82,361  76,757 
$ 115,020  $ 100,431 
Total inventory as of June 27, 2020 is net of $17.3 million of reserves, customer payments, and customer deposits compared to $10.8 million in reserves, customer payments, and customer deposits as of June 29, 2019.


3. PROPERTY, PLANT AND EQUIPMENT
Property, plant and equipment consists of the following:
Life June 27, 2020 June 29, 2019
  (in years) (in thousands)
Land — $ 4,034  $ 2,940 
Buildings and improvements 3 to 30 23,444  23,776 
Equipment 1 to 10 72,151  67,348 
Furniture and fixtures 3 to 5 4,883  4,248 
Total Property, Plant and Equipment 104,512  98,312 
Accumulated depreciation (72,748) (68,899)
Property, Plant and Equipment, net $ 31,764  $ 29,413 

4. LONG-TERM DEBT
On March 5, 2020, the Company entered into a Seventh amendment to the amended and restated credit agreement extending the limit on our line of credit facility to $65.0 million. Outside of the limit increase of the credit facility, the agreement reflects the same specifications and terms as the sixth amendment to the amended and restated credit agreement entered into by the Company on November 20, 2019; discussed below. As of June 27, 2020, the Company had an outstanding balance under the credit facility of $60.1 million, $0.4 million in outstanding letters of credit and $4.5 million available for future borrowings. As of June 29, 2019, the Company had an outstanding balance under the credit facility of $23.4 million, $0.4 million in outstanding letters of credit and $21.3 million available for future borrowings. The Company's debt was paid in full in conjunction with the closing of a new credit facility subsequent to June 27, 2020. Refer to footnote 17 - Subsequent Events for additional details.
On November 20, 2019, the Company entered into a Sixth amendment to the amended and restated credit agreement extending the limit on our line of credit facility to $55.0 million as evidenced by the Second Replacement Revolving Note. The agreement specifies that the proceeds of the revolving line of credit be used primarily for working capital and general corporate purposes. The line of credit is secured by substantially all of the assets of the Company. On September 30, 2018, the Company entered into a Fourth amendment to the amended and restated credit agreement to extend the maturity date to November 1, 2023, at which time all outstanding balances are payable.
On September 10, 2019, the Company entered into a Fifth amendment to the amended and restated credit agreement to increase the outstanding balance on the term loan in the amount of $5.0 million and to extend the maturity date to September 30, 2022 on the original term loan in the amount of $35.0 million that was used to acquire all of the outstanding shares of CDR Manufacturing, Inc. (dba Ayrshire Electronics). The term loan requires quarterly payments of $1.67 million commencing December 31, 2019 through September 30, 2021, and quarterly payments of $0.4 million commencing December 31, 2021 through September 30, 2022, with a final payment of the remaining outstanding balance on September 30, 2022. The Company had an outstanding balance of $10.0 million and $11.3 million under the term loan as of June 27, 2020 and June 29, 2019, respectively.
42

On December 28, 2016, the Company entered into an equipment term loan agreement in the amount of $3.9 million in order to further invest in production equipment. The equipment term loan is collateralized by production equipment. Under this loan agreement, equal quarterly payments of approximately $0.2 million commenced on March 31, 2017 and will continue through the maturity of the equipment term loan on June 30, 2021. Amortization of the debt issuance costs is reported as interest expense on the consolidated income statement. As of June 27, 2020, the Company had an outstanding balance of $0.9 million. As of June 29, 2019, the Company had an outstanding balance of $1.7 million.
The Fifth amendment to the amended and restated credit agreement noted above to increase the outstanding balance on the term loan in the amount of $5.0 million fixes borrowings under the revolving line of credit, term loan and equipment term loan to bear interest at LIBOR plus 2.0%, as opposed to previous borrowings at either a “Base Rate” or a “Fixed Rate,” as elected by the Company. The base rate is the higher of the Wells Fargo Bank prime rate, daily one month London Interbank Offered Rate (LIBOR) plus 1.5%, or the Federal Funds rate plus 1.5%. The fixed rate is LIBOR plus 1.75%, LIBOR plus 2.0% or LIBOR plus 2.25% depending on the level of the Company’s trailing four quarters Earnings Before Interest, Taxes, Depreciation and Amortization (EBITDA). The interest rates on the outstanding debt as of June 27, 2020 range from 2.17% - 2.18% compared to 4.40% - 5.50% as of June 29, 2019.
Debt maturities as of June 27, 2020 for the next four years are as follows (in thousands):
Fiscal Years Ending Amount
2021 $ 7,537 
2022 2,917 
2023 417 
2024 60,094 
Total debt $ 70,965 
Unamortized debt issuance costs (30)
Long-term debt, net of debt issuance costs $ 70,935 
The Company must comply with certain financial covenants, including a cash flow leverage ratio, an asset coverage ratio and a fixed charge coverage ratio. The credit agreement requires the Company to maintain a minimum profit threshold, limits the maximum capital lease expenditures and restricts the Company from declaring or paying dividends in cash or stock without prior bank approval. The Company was in compliance with all financial covenants as of June 27, 2020.
5. TRADE ACCOUNTS RECEIVABLE PURCHASE PROGRAMS
Sale Programs
The Company has utilized an Account Purchase Agreement with Wells Fargo Bank, N.A. ("WFB") which allows the Company to sell and assign to WFB and WFB may purchase from Company the accounts receivable of certain Company customers in a maximum aggregate amount outstanding of $25.0 million. This agreement may be cancelled at any time by either party. The Company also has an Account Purchase Agreement with Orbian Financial Services (“Orbian”). This agreement allows the Company to sell accounts receivable of certain customers to Orbian and the agreement may be cancelled at any time by either party.
Total accounts receivables sold during the twelve months ended June 27, 2020 and June 29, 2019 was approximately $41.4 million and $81.0 million, respectively. Accounts receivables sold and not yet collected was approximately $9,000 and $1.7 million as of June 27, 2020 and June 29, 2019, respectively. The receivables that were sold were removed from the consolidated balance sheets and the cash received is reflected as cash provided by operating activities in the consolidated statements of cash flows. The Company no longer had factored receivables at year end fiscal 2020.
43

6. INCOME TAXES
Income tax benefit consists of the following:
  Fiscal Year Ended
  June 27, 2020 June 29, 2019 June 30, 2018
  (in thousands)
Current income tax benefit:
United States $ 365  $ (537) $ (221)
Foreign 154  895  1,722 
519  358  1,501 
Deferred income tax benefit:
United States (1,850) (910) (795)
Foreign 892  (206) (823)
(958) (1,116) (1,618)
Total income tax benefit $ (439) $ (758) $ (117)
The Company has gross tax credit carryforwards of approximately $8.8 million at June 27, 2020 consisting of federal research and development (R&D) tax credits.
Management has reviewed all deferred tax assets for purposes of determining whether or not a valuation allowance may be required. A valuation allowance against deferred tax assets is required if it is more likely than not that some of the deferred tax assets will not be realized. Based upon the Company’s profitability, forecasted income, and evaluation of all other positive and negative evidence, management determined that it is more likely than not that the deferred tax assets will be realized.
Subsequent to the end of the fiscal year ending June 27, 2020, the Treasury Department issued final regulations applicable to the Company’s position with respect to the U.S. taxability of foreign earnings under the global intangible low taxed income (also known as “GILTI”) regime and the deductibility of interest expense under IRC Section 163(j). The Company is still evaluating the impact of these regulations, and, at this time, it does not anticipate any material impact to its current or future income tax positions.
On March 27, 2020, the Coronavirus Aid, Relief, and Economic Security Act (CARES Act) was enacted in response to the COVID-19 pandemic. The CARES Act, among other things, permits net operating loss (NOL) carryovers and carrybacks to offset 100% of taxable income for taxable years beginning before 2021. In addition, the CARES Act allows NOLs incurred in 2018, 2019, and 2020 to be carried back to each of the five preceding taxable years to generate a refund of previously paid income taxes. The Company does not expect that the NOL carryback provision of the CARES Act will result in a material cash benefit. In addition, the CARES Act contains modifications on the limitation of business interest for tax years beginning in 2019 and 2020. The modifications to Section 163(j) increase the allowable business interest deduction from 30% of adjusted taxable income to 50% of adjusted taxable income. This modification would increase the allowable interest expense deduction of the Company and result in less taxable income for fiscal year 2020, but is not expected to have a material impact on the provision for income taxes. Also, under the CARES Act, AMT credits not previously refunded for the 2018 tax year are refundable in the 2019 taxable year rather than in years 2019-2021, and taxpayers can elect to claim 100% of the AMT credits in the first taxable year beginning in 2018 by applying for a tentative refund claim on or before December 31, 2020. The Company has made this election by applying for a tentative refund claim. The Company is taking advantage of the deferred payment payroll taxes provision, the impacts of which are not expected to be material. The Company is continuing to evaluate the impacts of other aspects of the CARES Act, and at this time the Company does not believe they will have a material impact on our consolidated financial position, results of operations, or cash flows.
On December 22, 2017, the Tax Cuts and Jobs Act (“Tax Act”) was signed into law. The Tax Act reduced Federal corporate tax rates effective January 1, 2018, and changed certain other provisions, many of which were not effective until fiscal year 2019. Effective tax rates for fiscal year 2018, were blended rates reflecting the benefit of two quarters of Federal tax rate reductions. These benefits were offset by discrete expenses relating to the revaluation of our U.S. net deferred tax assets, an adjustment relating to foreign exchange, and required adjustments associated with the transition from a global to a territorial tax system (discussed further below).
As a result of the U.S. tax system under the Tax Act from a global to a territorial model, a deemed one-time repatriation of all accumulated earnings and profits (AE&P) in Mexico and China occurred on December 31, 2017 (the “Transition Tax”).
44

On December 22, 2017, the staff of the SEC issued Staff Accounting Bulletin No. 118 (“SAB No. 118”). SAB No. 118 provided guidance on accounting for the tax effects of the 2017 Tax Act and allowed registrants to record provisional amounts for a period of up to one year from the date of enactment of the 2017 Tax Act. In fiscal year 2019, we finalized the Transition Tax calculation, resulting in a net Transition Tax amount of $0.8 million, a decrease of $0.4 million for the fiscal year.
In addition to the $0.8 million Transition Tax described above, the Company recognized a $1.3 million discrete expense in fiscal year 2018 due to the revaluation of our U.S. net deferred tax assets. Offsetting these amounts, because of the shift to a territorial system of taxation in the U.S., the Company recognized a discrete benefit of approximately $1.3 million related to reversing its previously recognized estimated liability associated with estimated future repatriations from Mexico and China.
In future years, because of the Transition Tax on AE&P described above, repatriations of cash will generally be tax-free in the U.S. However, withholding taxes in China may still apply to any such future repatriations. Management has not changed its indefinite investment assertions with regards to the portion of AE&P in China that may be repatriated in the future. Accordingly, management estimates that future repatriations of cash from China may result in approximately $0.8 million of withholding tax. There would be no offsetting foreign tax credits in the U.S. and as such, this potential liability is a direct cost associated with actual repatriations. Withholding taxes will not apply to future repatriations from Mexico or Vietnam.
The Company expects to repatriate a portion of its foreign earnings based on increased net sales growth driving additional capital requirements domestically, cash requirements for potential acquisitions and to implement certain tax strategies. The Company expects to repatriate approximately $7.8 million from China, in the future. All other unremitted foreign earnings are expected to remain permanently reinvested for planned fixed assets purchases and improvements in foreign locations.
The Company’s effective tax rate differs from the federal tax rate as follows:
  Fiscal Year Ended
  June 27, 2020 June 29, 2019 June 30, 2018
  (in thousands)
Federal income tax provision (benefit) at statutory rates $ 907  $ (1,836) $ (397)
State income taxes, net of federal tax effect 90  (158) (4)
Foreign tax rate differences 336  251  103 
Tax rate change —  —  1,634 
Provisional transition tax on accumulated foreign earnings —  (384) 1,190 
Effect of income tax credits (310) (861) (687)
Previously unrecognized tax benefits (1,345) —  — 
Effect of repatriation of foreign earnings, net —  (42) (1,484)
Goodwill write-off —  1,726  — 
Global Intangible Low-Taxed Income (GILTI) tax —  150  — 
Provision to return reconciliation (241) 630  (401)
Other 124  (234) (71)
Income tax benefit $ (439) $ (758) $ (117)
The domestic and foreign components of income (loss) before income taxes were:
  Fiscal Year Ended
  June 27, 2020 June 29, 2019 June 30, 2018
  (in thousands)
Domestic $ 1,142  $ (12,220) $ (4,593)
Foreign 3,177  3,480  3,151 
Income (loss) before income taxes $ 4,319  $ (8,740) $ (1,442)
45

Deferred income tax assets and liabilities consist of the following at:
June 27, 2020 June 29, 2019
  (in thousands)
Deferred tax assets:
Net operating loss $ 184  $ 33 
Tax credit carryforwards, net 5,961  4,986 
Inventory 1,426  1,087 
Identifiable intangibles 493  407 
Interest expense carryforward —  474 
Accruals 2,847  3,549 
Research and development expenses —  232 
Mart-to-market adjustments 415  — 
ASC 606 deferred costs 1,943  2,484 
Lease liabilities 3,201  — 
Other 212  30 
Deferred income tax assets $ 16,682  $ 13,282 
Deferred tax liabilities:
Accrued withholding tax - unremitted earnings (820) (820)
Fixed assets (566) (443)
Right-of-use assets (3,290) — 
Mart-to-market adjustments —  (730)
ASC 606 accelerated revenue (1,344) (3,274)
Other (718) (175)
Deferred income tax liabilities $ (6,738) $ (5,442)
Net deferred income tax assets $ 9,944  $ 7,840 
Balance sheet caption reported in:
Long-term deferred income tax asset $ 10,178  $ 7,840 
Long-term deferred income tax liability (234) — 
Net deferred income tax asset $ 9,944  $ 7,840 
Certain reclassifications have been made in the 2019 information in the above table to conform with 2020 presentation.
Uncertain Tax Positions:
The Company has R&D tax credits that approximate $8.8 million that have 20-year carryforwards before expiring. The Company’s R&D tax credits expire in various fiscal years from 2026 to 2040. The Company also has alternative minimum tax credits, which do not expire, approximating $347,000, which are now classified as a receivable due to the repeal of the alternative minimum tax.
As of June 27, 2020, the Company had unrecognized tax benefits of $2.9 million related to its gross R&D tax credits. The unrecognized tax benefits relate to certain R&D tax credits generated from 2002 to 2020.
A reconciliation of the beginning and ending amount of unrecognized tax benefits is as follows:
Fiscal Year Ended
June 27, 2020 June 29, 2019 June 30, 2018
(in thousands)
Beginning Balance $ 4,099  $ 4,011  $ 3,947 
Additions based on tax positions related to the current year 109  88  64 
Lapse of statute of limitations (1,345) —  — 
Ending Balance $ 2,863  $ 4,099  $ 4,011 
46

The increase from the prior year is due to additional R&D credits that were recorded in 2020 as discussed above. Management does not anticipate any material changes to this amount during the next 12 months.
The Company recognizes interest accrued related to unrecognized tax benefits and penalties in its income tax provision. The Company has not recognized any interest or penalties in the fiscal years presented in these financial statements. The Company is subject to income tax in the U.S. federal jurisdiction, various state jurisdictions, Mexico, China and Vietnam. Certain years remain subject to examination but there are currently no ongoing exams in any taxing jurisdictions.
7. EARNINGS PER SHARE
Basic earnings per share (EPS) is calculated by dividing net income (the numerator) by the weighted-average number of common shares outstanding (the denominator) during the period. Diluted EPS is computed by including both the weighted-average number of shares outstanding and any dilutive common share equivalents in the denominator. The following table presents a reconciliation of the denominator and the number of antidilutive common share awards that were not included in the diluted earnings per share calculation. These antidilutive securities occur when equity awards outstanding have an option price greater than the average market price for the period:
 
Fiscal Year Ended
(in thousands, except per share information)
  June 27, 2020 June 29, 2019 June 30, 2018
Net income (loss) $ 4,758  $ (7,982) $ (1,325)
Weighted average shares outstanding– basic 10,760  10,760  10,760 
Effect of dilutive common stock awards 57  —  — 
Weighted average shares outstanding – diluted 10,816  10,760  10,760 
Net income (loss) per share – basic $ 0.44  $ (0.74) $ (0.12)
Net income (loss) per share – diluted $ 0.44  $ (0.74) $ (0.12)
Antidilutive SARs not included in diluted earnings per share 720  985  827 
47

8. STOCK OPTION AND BENEFIT PLANS
The Company’s incentive plan provides for equity and liability awards to employees and non-employee directors in the form of stock options, stock appreciation rights (SARs), restricted stock, restricted stock units, stock awards, stock units, performance shares, performance units, and other stock-based or cash-based awards. Compensation cost is recognized on a straight-line basis over the requisite employee service period, which is generally the vesting period, and is recorded as employee compensation expense in cost of goods sold, research, development and engineering, and selling, general and administrative expenses. Share-based compensation is recognized only for those awards that are expected to vest, with forfeitures estimated at the date of grant based on historical experience and future expectations.
In addition to service conditions, these SARs contain a performance condition. The additional performance condition is based upon the achievement of Return on Invested Capital (ROIC) goals relative to a peer group. All awards with performance conditions are measured over the vesting period and are charged to compensation expense over the requisite service period based on the number of shares expected to vest. The SARs cliff vest after a three-year period from date of grant and expire five years from date of grant.
On July 26, 2019, the Company granted 175,000 SARs under the 2010 Incentive Plan to certain key employees and outside directors at a strike price of $4.93 and a grant date fair value of $1.23. As of June 27, 2020, 150,000 remain outstanding. The grant date fair value for the awards granted during fiscal year 2020, were estimated using the Black Scholes option valuation method with the following weighted average assumptions as of July 26, 2019:
Fiscal Year 2020
  July 26, 2019
Expected dividend yield —%
Risk – free interest rate 1.54%
Expected volatility 28.50%
Expected life 4.00
On July 27, 2018, the Company granted 161,250 SARs under the 2010 Incentive Plan to certain key employees and outside directors at a strike price of $8.17 and a grant date fair value of $2.27. As of June 27, 2020, 121,250 remain outstanding. The grant date fair value for the awards granted during fiscal year 2019, were estimated using the Black Scholes option valuation method with the following weighted average assumptions as of July 27, 2018:
Fiscal Year 2019
  July 27, 2018
Expected dividend yield —%
Risk – free interest rate 2.80%
Expected volatility 29.75%
Expected life 4.00
On July 28, 2017, the Company granted 272,500 SARs under the 2010 Incentive Plan to certain key employees and outside directors at a strike price of $7.26 and a grant date fair value of $1.89. As of June 27, 2020, 197,500 remain outstanding. The grant date fair value for the awards granted during fiscal year 2018, were estimated using the Black Scholes option valuation method with the following weighted average assumptions as of July 28, 2017:
Fiscal Year 2018
  July 28, 2017
Expected dividend yield —%
Risk – free interest rate 1.70%
Expected volatility 29.76%
Expected life 4.00
48

Subsequent to June 27, 2020, the Company granted 155,000 SARs with a strike price of $6.94 and a grant date fair value of $2.32.
Share-based compensation expense is recognized only for those awards that are expected to vest, with forfeitures estimated at the date of grant based on the Company’s historical experience and future expectations. This forfeiture rate will be revised, if necessary, in subsequent periods if actual forfeitures differ from the amount estimated. Share-based compensation expense for fiscal years ended June 27, 2020, June 29, 2019 and June 30, 2018 was $0.3 million, $0.4 million and $0.4 million, respectively.
The Black-Scholes option valuation model is used by the Company for estimating the fair value of SARs. Option valuation models require the input of highly subjective assumptions, particularly for the expected term and expected stock price volatility. Changes in these assumptions can materially affect the fair value estimates.
There were no SARs exercised during fiscal year 2020, 2019 or 2018.
As of June 27, 2020, total unrecognized compensation expense related to nonvested share-based compensation arrangements was approximately $0.2 million. This expense is expected to be recognized over a weighted-average period of 1.58 years.
The following table summarizes the Company’s Options and SARs activity for all plans from July 2, 2016 through June 27, 2020:
 
SARs
Available
For Grant 		SARs
Outstanding 		Aggregate
Intrinsic
Value (in
thousands) 		Weighted
Average
Exercise
Price 		Weighted
Average
Remaining
Contractual
Life (in
years)
Balances, July 1, 2017 394,335  1,084,999  $ —  $ 9.09  2.3
Shares authorized —  — 
SARs granted (272,500) 272,500  7.26 
SARs forfeited 282,500  (282,500) 7.84 
SARs exercised —  —  —  — 
Balances June 30, 2018 404,335  1,074,999  $ 79  $ 8.90  2.3
Shares authorized —  — 
SARs granted (161,250) 161,250  8.17 
SARs forfeited 250,833  (250,833) 10.59 
SARs exercised —  —  —  — 
Balances, June 29, 2019 493,918  985,416  $ —  $ 8.35  1.7
Shares authorized —  — 
SARs granted (175,000) 175,000  4.93 
SARs forfeited 290,833  (290,833) 7.71 
SARs exercised —  —  —  — 
Balances, June 27, 2020 609,751  869,583  $ —  $ 7.87  1.9
Exercisable at June 27, 2020 400,833  $ —  $ 9.18  0.6
Additional information regarding SARs outstanding and exercisable as of June 27, 2020, is as follows:
Range of
Exercise Prices 		Number Outstanding Weighted Avg.
Remaining
Contractual Life (yrs.) 		Weighted Avg.
Exercise Price 		Number
Exercisable 		Weighted
Avg. Exercise
Price
$4.40 – $7.90 347,500  2.1 $ 6.25  —  $ — 
7.91 – 9.91 328,750  0.6 8.17  207,500  8.17 
9.92 – 11.34 193,333  0.1 10.26  193,333  10.26 
$4.40 to $11.34 869,583  1.9 $ 7.87  400,833  $ 9.18 
The Company has defined contribution plans available to U.S. employees who have attained age 21. Company contributions to the plans were approximately $0.8 million, $0.9 million, and $0.8 million during fiscal years 2020, 2019 and 2018, respectively.
49

9. COMMITMENTS AND CONTINGENCIES
Leases: As of June 27, 2020, June 29, 2019 and June 30, 2018, the Company did not have any property and equipment financed under capital leases. Please refer to Note 16 for information regarding operating lease commitments.
Rental expense under operating leases was approximately $4.2 million, $5.0 million, and $7.1 million during fiscal years 2020, 2019 and 2018, respectively.
Warranty Costs: The Company provides warranties on certain product sales, and allowances for estimated warranty costs are recorded during the period of sale. The determination of such allowances requires the Company to make estimates of product return rates and expected costs to repair or to replace the products under warranty. The Company establishes warranty reserves based on historical warranty costs for each product line combined with liability estimates based on the prior twelve months’ sales activities. As of June 27, 2020 and June 29, 2019, the reserve for warranty costs was approximately $15,000 and $22,000, respectively.
If actual return rates and/or repair and replacement costs differ significantly from estimates, adjustments to recognize additional cost of sales may be required in future periods. Warranty expense for fiscal years 2020, 2019 and 2018 was related to workmanship claims on certain EMS products.
Litigation: The Company is party to certain lawsuits or claims in the ordinary course of business. The Company does not believe that these proceedings, individually or in the aggregate, will have a material adverse effect on the financial position, results of operations or cash flow of the Company.
Indemnification Rights: Under the Company’s bylaws, the Company’s directors and officers have certain rights to indemnification by the Company against certain liabilities that may arise by reason of their status or service as directors or officers. The Company maintains director and officer insurance, which may cover certain liabilities arising from its obligation to indemnify its directors and officers and former directors in certain circumstances.
10. DERIVATIVE FINANCIAL INSTRUMENTS
As of June 27, 2020, the Company had outstanding foreign currency forward contracts and swaps with a total notional amount of $36.7 million. The maturity dates for these contracts and swaps extend through December 2021. As of June 27, 2020, the net amount of unrealized loss expected to be reclassified into earnings within the next 12 months is approximately $1.8 million. During the fiscal year ended June 27, 2020, the Company entered into $23.8 million of foreign currency forward contracts and settled $26.7 million of such contracts. During the fiscal year ended June 29, 2019, the Company entered into $19.2 million of foreign currency forward contracts and settled $25.9 million of such contracts. During the fiscal year ended June 30, 2018, the Company entered into $13.7 million of foreign currency forward contracts and settled $28.1 million of such contracts.
As of June 27, 2020, the aggregate notional amount of the Company’s outstanding foreign currency contracts and swaps along with their unrealized gains (losses) are expected to mature as summarized below (in thousands):
Quarter Ending Notional Contracts and Swaps in MXN Notional Contracts and Swaps in USD Estimated Fair Value
September 26, 2020 $ 141,173  $ 6,729  $ (623)
December 26, 2020 $ 132,773  $ 6,241  $ (561)
April 3, 2021 $ 148,253  $ 6,682  $ (425)
July 3, 2021 $ 144,725  $ 6,446  $ (367)
October 2, 2021 $ 146,373  $ 5,502  $ 564 
January 1, 2022 $ 137,973  $ 5,129  $ 532 
On November 6, 2019, the Company entered into an interest rate swap contract with an effective date of November 6, 2019 and a termination date of September 30, 2022, with a notional amount of $15.0 million related to the borrowings outstanding under the term loan. This interest rate swap pays the Company variable interest at the one month LIBOR rate, and the Company pays the counter party a fixed interest rate. The fixed interest rate for the contract is 1.70% that replaces the one month LIBOR rate component of our contractual interest to be paid to WFB as part of our term loan. Based on the terms of the interest rate swap contract and the underlying borrowings outstanding under the term loan, the interest rate contract was determined to be effective, and thus qualified as a cash flow hedge. As of June 27, 2020, the remaining notional balance of this swap was $11.7 million.

50

On November 6, 2019, the Company entered into an interest rate swap contract with an effective date of November 6, 2019 and a termination date of November 1, 2023, with a notional amount of $15.0 million related to the borrowings outstanding under the line of credit. This interest rate swap pays the Company variable interest at the one month LIBOR rate, and the Company pays the counter party a fixed interest rate. The fixed interest rate for the contract is 1.67% that replaces the one month LIBOR rate component of our contractual interest to be paid to WFB as part of our line of credit. Based on the terms of the interest rate swap contract and the underlying borrowings outstanding under the line of credit, the interest rate contract was determined to be effective, and thus qualified as a cash flow hedge. In conjunction with the new credit facility, the interest rate swap contracts have been terminated. Please refer to footnote 17 Subsequent Event for more information.
The following table summarizes the fair value of derivative instruments in the Consolidated Balance Sheets as of June 27, 2020 and June 29, 2019 (in thousands):
June 27, 2020 June 29, 2019
Derivatives Designated as Hedging Instruments Balance Sheet Location Fair Value Fair Value
Foreign currency forward contracts & swaps Other current assets $ —  $ 2,912 
Foreign currency forward contracts & swaps Other long-term assets $ 1,097  $ 320 
Foreign currency forward contracts & swaps Other current liabilities $ (1,960) $ — 
Foreign currency forward contracts & swaps Other long-term liabilities $ (17) $ — 
Interest rate swaps Other current assets $ —  $ 2 
Interest rate swaps Other current liabilities $ (347) $ — 
Interest rate swaps Other long-term liabilities $ (610) $ — 
The following table summarizes the gain (loss) on derivative instruments, net of tax, on the Consolidated Statements of Income for the fiscal year 2020 (in thousands):
Derivatives Designated as Hedging Instruments Classification of Gain (Loss) Reclassified from Accumulated OCI into Income (Effective Portion) AOCI Balance
as of
June 29, 2019 		Effective
Portion
Recorded In
AOCI 		Effective Portion
Reclassified From
AOCI Into Income 		AOCI Balance
as of
June 27, 2020
Forward contracts & swaps Cost of sales $ 2,424  $ (865) $ (2,318) $ (759)
Interest rate swap Interest expense 2  (782) 39  (741)
Total $ 2,426  $ (1,647) $ (2,279) $ (1,500)
The following table summarizes the gain (loss) on derivative instruments, net of tax, on the Consolidated Statements of Income for the fiscal year 2019 (in thousands):
Derivatives Designated as Hedging Instruments Classification of Gain (Loss) Reclassified from Accumulated OCI into Income (Effective Portion) AOCI Balance
as of
June 30, 2018 		Effective
Portion
Recorded In
AOCI 		Effective Portion
Reclassified From
AOCI Into Income 		AOCI Balance
as of
June 29, 2019
Forward contracts & swaps Cost of sales $ (988) $ 3,332  $ 80  $ 2,424 
Interest rate swap Interest expense 19  2  (19) 2 
Total $ (969) $ 3,334  $ 61  $ 2,426 
The following table summarizes the gain (loss) on derivative instruments, net of tax, on the Consolidated Statements of Income for the fiscal year 2018 (in thousands):
Derivatives Designated as Hedging Instruments Classification of Gain (Loss) Reclassified from Accumulated OCI into Income (Effective Portion) AOCI Balance
as of
July 1, 2017 		Effective
Portion
Recorded In
AOCI 		Tax Rate Effect Reclassification Effective Portion
Reclassified From
AOCI Into Income 		AOCI Balance
as of
June 30, 2018
Forward contracts & swaps Cost of sales $ (2,707) $ (1,942) $ (583) $ 4,244  $ (988)
Interest rate swap Interest expense (68) 20  (3) 70  19 
Total $ (2,775) $ (1,922) $ (586) $ 4,314  $ (969)
As of June 27, 2020, the Company does not have any foreign exchange contracts with credit-risk-related contingent features. The Company is subject to the risk of fluctuating interest rates from our line of credit and foreign currency risk resulting from our China operations. The Company does not currently manage these risk exposures by using derivative instruments.

51

11. FAIR VALUE MEASUREMENTS
The Company has adopted ASC 820, Fair Value Measurements, which defines fair value, establishes a framework for assets and liabilities being measured and reported at fair value and expands disclosures about fair value measurements. There are three levels of fair value hierarchy inputs used to value assets and liabilities which include: Level 1 – inputs are quoted market prices for identical assets or liabilities; Level 2 – inputs other than quoted market prices included in Level 1 that are observable for the asset or liability, either directly or indirectly; and Level 3 – inputs are unobservable inputs for the asset or liability. There have been no changes in the fair value methodologies used at June 27, 2020 and June 29, 2019.
The following table summarizes the fair value of assets (liabilities) of the Company’s derivatives that are required to be measured on a recurring basis as of June 27, 2020 and June 29, 2019 (in thousands):
  June 27, 2020
  Level 1 Level 2 Level 3 Total
Fair Value
Financial Assets:
Foreign currency forward contracts & swaps $ —  $ 1,097  $ —  $ 1,097 
Financial Liabilities:
Interest rate swaps $ —  $ (957) $ —  $ (957)
Foreign currency forward contracts & swaps $ —  $ (1,977) $ —  $ (1,977)
  June 29, 2019
  Level 1 Level 2 Level 3 Total
Fair Value
Financial Assets:
Interest rate swaps $ —  $ 2  $ —  $ 2 
Foreign currency forward contracts & swaps —  3,232  —  $ 3,232 
The Company currently has forward contracts to hedge known future cash outflows for expenses denominated in the Mexican peso and an interest rate swap to mitigate risk associated with certain borrowings under the Company’s debt arrangement. These contracts are measured on a recurring basis based on the foreign currency spot rates and forward rates quoted by banks or foreign currency dealers. These contracts are marked to market using level 2 input criteria every quarter with the unrealized gain or loss, net of tax, reported as a component of shareholders’ equity in accumulated other comprehensive income (loss), as they qualify for hedge accounting.
The carrying values of cash and cash equivalents, accounts receivable, current liabilities, and non current lease liability are reflected on the balance sheets at June 27, 2020 and June 29, 2019, reasonably approximate their fair value.
The Company’s long-term debt, which is measured at amortized cost, primarily consists of a revolving line of credit, a term loan and an equipment term loan. These borrowings bear interest at either a “Base Rate” or a “Fixed Rate,” as elected by the Company. Each of these rates is a variable floating rate dependent upon current market conditions and the Company’s current credit risk as discussed in footnote 4.
As a result of the determinable market rate for our revolving line of credit, term loan and equipment term, they are classified within Level 2 of the fair value hierarchy. Further, the carrying value of each of these instruments reasonably approximates their fair value as of June 27, 2020 and June 29, 2019.
Other assets and liabilities held by the Company may be required to be measured at fair value on a non recurring basis. As of June 29, 2019, the customer relationship intangibles were written down to their fair value of $0. This measurement was the result of certain triggering events that occurred during the third quarter of fiscal year 2019. Refer to Note 14 for further discussion of the impairment.
52

12. ENTERPRISE-WIDE DISCLOSURES
Operating segments are defined in ASC Topic 280, Segment Reporting as components of an enterprise for which separate financial information is available that is evaluated regularly by the chief operating decision maker, or decision making group, in deciding how to allocate resources and in assessing performance. The Company’s chief operating decision maker is its Chief Executive Officer. As of June 27, 2020, the Company operates and internally manages a single operating segment, Electronics Manufacturing Services as this is the only discrete financial information that is regularly reviewed by the chief operating decision maker. This segment provides integrated electronic and mechanical engineering, assembly, sourcing and procurement, logistics, and new product testing for our customers.
Products and Services
Of the revenues for the years ended June 27, 2020, June 29, 2019, and June 30, 2018, EMS sales and services were $449.5 million, $463.9 million and $445.8 million, respectively. Keyboard sales for the years ended June 27, 2020, June 29, 2019, and June 30, 2018 were $4,000, $0.1 million and $0.5 million, respectively.
Geographic Areas
Net sales and long-lived assets (property, plant, and equipment) by geographic area for the years ended and as of June 27, 2020, June 29, 2019 and June 30, 2018 are summarized in the following table. Net sales set forth below are based on the shipping destination. Long-lived assets information is based on the physical location of the asset.
Fiscal Year Ended
(in thousands)
2020 2019 2018
Geographic net sales:
Domestic (U.S.) $ 338,766  $ 357,341  $ 329,230 
Foreign 110,714  106,703  117,092 
Total $ 449,480  $ 464,044  $ 446,322 
Long-lived assets:
United States $ 9,213  $ 9,658  $ 7,454 
Mexico 19,325  17,781  19,395 
Vietnam 2,644  1,220  — 
China 582  754  699 
Total $ 31,764  $ 29,413  $ 27,548 
Percentage of net sales made to customers located in the following countries:
Fiscal Year Ended
2020 2019 2018
United States 75% 77% 74%
China 19 19 24
Other foreign countries (a)
5 3 2
Canada 1 1 —
Total 100% 100% 100%
(a) No other individual foreign country accounted for 10% or more of the foreign sales in fiscal years 2020, 2019 or 2018.
53

Significant Customers
The percentage of net sales to and trade accounts receivables from significant customers were as follows:
  Percentage of Net
Sales Fiscal Year 		Percentage of
Trade Accounts Receivable
Fiscal Year
  2020 2019 2018 2020 2019
Customer A 18% 17% 19% 14% 11%
Customer B * * * 12 % *
* Current customer amount represents less than 10%.

13. QUARTERLY FINANCIAL DATA (Unaudited)
  Fiscal Year Ended June 27, 2020
  First
Quarter 		Second
Quarter 		Third
Quarter 		Fourth
Quarter
  (in thousands, except per share amounts)
Net sales $ 105,285  $ 116,722  $ 111,455  $ 116,018 
Gross profit 9,273  8,122  9,248  8,606 
Income before income taxes 1,829  974  1,010  506 
Net income 1,552  824  910  1,472 
Net income per share - basic $ 0.14  $ 0.08  $ 0.08  $ 0.14 
Net income per share - diluted $ 0.14  $ 0.08  $ 0.08  $ 0.14 
Weighted average shares outstanding
Basic 10,760  10,760  10,760  10,760 
Diluted 10,805  10,877  10,885  10,832 
  Fiscal Year Ended June 29, 2019
  First
Quarter 		Second
Quarter 		Third
Quarter 		Fourth
Quarter
  (in thousands, except per share amounts)
Net sales $ 127,472  $ 123,037  $ 107,954  $ 105,581 
Gross profit 9,533  9,880  6,807  8,381 
Income (loss) before income taxes 1,868  1,916  (13,256) 732 
Net income (loss) 1,593  1,589  (11,981) 817 
Net income (loss) per share - basic $ 0.15  $ 0.15  $ (1.11) $ 0.08 
Net income (loss) per share - diluted $ 0.15  $ 0.15  $ (1.11) $ 0.08 
Weighted average shares outstanding
Basic 10,760  10,760  10,760  10,760 
Diluted 10,979  10,881  10,760  10,760 
54

14. GOODWILL AND OTHER INTANGIBLE ASSETS
The Company recorded goodwill in connection with the Ayrshire and Sabre acquisitions resulting primarily from the synergies that resulted from the Company's acquisitions and the assembled workforce. The goodwill is not amortized for financial accounting purposes.
In accordance with accounting guidance on goodwill and other intangible assets, the Company evaluates goodwill for impairment at the reporting unit level annually, and whenever circumstances occur indicating that goodwill might be impaired. Upon adoption of ASU 2017-04, the Company now recognizes an impairment charge (not to exceed the total amount of goodwill allocated to the reporting unit) for the amount by which the carrying amount of a reporting unit exceeds the reporting unit’s fair value. During the third quarter of fiscal year 2019, a goodwill impairment of $10.0 million was recognized.
During the third quarter for fiscal year 2019, the Company assessed other finite-lived intangible assets including the Company’s customer relationships and favorable lease agreements due to an indicator of possible impairment being present. As a result of the analysis performed, the Company determined that the carrying value of the customer relationships intangible asset was not recoverable and recorded an impairment for the entire carrying amount during the third quarter of fiscal year 2019. This resulted in an impairment charge related to other intangible assets of $2.5 million recognized in the third quarter of fiscal year 2019. The Company’s analysis did not indicate that any of its other long-lived assets were impaired.
During the first quarter of fiscal year 2020, the Company adopted the Accounting Standards Update 2016-02, Leases which supersedes ASC 840 Leases and creates a new topic, ASC 842 Leases. Under ASC 842, any assets or liabilities recognized in accordance with ASC 805 that are related to favorable or unfavorable terms of an operating lease for which an entity is a lessee, the entity should derecognize the asset or liability and commensurately adjust the ROU asset. Refer to footnote 16 for additional disclosure.
As such, the Company derecognized the intangible asset and added the offsetting amount to the ROU asset. Resulting in a reduction of favorable lease agreement intangible of $0.7 million, and no adjustment to retained earnings or future P&L impact.
The components of acquired intangible assets are as follows (in thousands):
June 27, 2020
Amortization Period
in Years 		Gross Carrying
Amount 		Accumulated
Amortization 		Derecognition Favorable Lease per ASC 842 Net Carrying
Amount
Other intangible assets:
Favorable Lease Agreements 4 - 7 2,941  (2,284) (657) — 
Total $ 2,941  $ (2,284) $ (657) $ — 
June 29, 2019
Amortization Period
in Years 		Gross Carrying
Amount 		Accumulated
Amortization 		Impairment
Recognized 		Net Carrying
Amount
Other intangible assets:
Non-Compete Agreements 3 - 5 $ 568  $ (568) $ —  $ — 
Customer Relationships 10 4,803  (2,311) (2,492) — 
Favorable Lease Agreements 4 - 7 2,941  (2,284) —  657 
Total $ 8,312  $ (5,163) $ (2,492) $ 657 
Amortization expense related to intangible assets was approximately $0.6 million and $1.1 million for the year ended June 29, 2019, and June 30, 2018; respectively.
55

15. REVENUE
Revenue Recognition
The Company specializes in services ranging from product manufacturing to engineering and tooling services. The first step in its process for revenue recognition is to identify the contract with a customer. A contract is defined as an agreement between two or more parties that creates enforceable rights and obligations. A contract can be written, oral, or implied. The Company generally enters into manufacturing service agreements (“MSA”) with its customers that outlines the terms of the business relationship between the customer and the Company. This includes matters such as warranty, indemnification, transfer of title and risk of loss, liability for excess and obsolete inventory, pricing, payment terms, etc. The Company will also bid on a program-by-program basis for customers in which an executed MSA may not be in place. In these instances, as well as when we have an MSA in place, we receive customer purchase orders for specific quantities and timing of products. As a result, the Company considers its contract with a customer to be the combination of the MSA and the purchase order. The transaction price is fixed and set forth in each purchase order. In the Company's normal course of business, there are no variable pricing components, or material amounts refunded to customers in the form of refunds or rebates.
The Company assesses whether control of the product or services promised under the contract is transferred to the customer at a point in time (shipment) or over time (as we manufacture the product). The Company is first required to evaluate whether its contracts meet the criteria for 'over-time' or 'point-in-time' recognition. The Company has determined that for the majority of its contracts the Company is manufacturing products for which there is no alternative use due to the unique nature of the customer-specific product, IP and other contract restrictions. The Company has an enforceable right to payment including a reasonable profit for performance completed to date with respect to these contracts. As a result, revenue is recognized under these contracts 'over-time' based on the input cost-to-cost method as it better depicts the transfer of control. This input method is based on the ratio of costs incurred to date as compared to the total estimated costs at completion of the performance obligation. For all other contracts that do not meet these criteria, such as manufacturing contracts for which the terms do not provide an enforceable right to payment for performance completed to date, the Company recognizes revenue when it has transferred control of the related manufactured products which generally occurs upon shipment to the customer. Revenue from engineering services is recognized over time as the services are performed.
The Company’s typical payment terms are 30 to 45 days and its sales arrangements do not contain any significant financing component for its customers.
The Company generally provides a warranty for workmanship on its manufacturing contracts. Historically, the amount of returns for workmanship issues has been de minimis under the Company’s warranties.
The Company elected to not disclose information about remaining performance obligations as they are part of contracts that that have expected durations of one year or less.
The Company has elected to expense costs to obtain contracts as incurred as these costs are immaterial to the financial statements.
During fiscal 2020, no revenues were recognized from performance obligations satisfied or partially satisfied in previous periods.
Contract Balances
A contract asset is recognized when the Company has recognized revenue, but has not issued an invoice for payment. Contract assets are classified separately on the condensed consolidated balance sheet and transferred to receivables when the right to payment becomes unconditional.
The following table summarizes the activity in the Company’s contract assets during the twelve months ended June 27, 2020 (in thousands):
Contract Assets
Beginning balance, June 29, 2019 $ 22,161 
Revenue recognized 441,405 
Amounts collected or invoiced (439,813)
Ending balance, June 27, 2020 $ 23,753 
56

The following table summarizes the activity in the Company’s contract assets during the twelve months ended June 29, 2019 (in thousands):
Contract Assets
Beginning balance, June 30, 2018 — 
Cumulative effect adjustment at July 1, 2018 11,906 
Revenue recognized 448,003 
Amounts collected or invoiced (437,748)
Ending balance, June 29, 2019 $ 22,161 

Disaggregation of Revenue
The following table presents the Company’s revenue disaggregated for the twelve months ended June 27, 2020 and the twelve months ended June 29, 21019 (in thousands):
Revenue
Recognition June 27, 2020 June 29, 2019
Over-Time $ 441,405  $ 458,256 
Point-in-Time 8,075  5,788 
Total $ 449,480  $ 464,044 

Revenues and associated costs from engineering design, development services and tooling, which are performed under contract of short term durations, are recognized over time as the services are performed. Revenue from engineering design, development
services and tooling represented approximately 3.3% of total revenue in fiscal year 2020.
16. LEASES
The Company has several commitments under operating leases for warehouses, manufacturing facilities, office buildings, and equipment with initial terms that expire at various dates during the next 1 year to 11 years.
The Company has some operating leases that include an extension clause. Management has considered the likelihood of exercising each extension option included and estimated the duration of the extension option, for those leases management determined to be reasonably certain, in calculating the lease term for measurement of the right of use asset and liability.
For operating leases, management assumed a discount rate of 4% - 5.9%. The weighted average discount rate is disclosed in the tables below.

The components of lease cost as of  June 27, 2020 were (in thousands):

Year Ended
Lease cost Classification June 27, 2020
Operating lease cost Cost of sales $ 4,511 
Operating lease cost Selling, general and administrative expenses 1,266 
Total lease cost $ 5,777 
57

Amounts reported in the Consolidated Balance Sheet as of June 27, 2020 were (in thousands, except weighted average lease term and discount rate):

June 27, 2020
Operating Leases:
Operating lease right of use assets $ 17,568 
Operating lease liabilities (1)
17,173 
Weighted-average remaining lease term (in years)
Operating leases 6.46
Weighted-average discount rate
Operating leases 4.07  %

(1) The current portion of the total operating lease liabilities of $4.5 million is classified under Other Current Liabilities, resulting in $12.6 million classified under Operating Lease Liabilities in the Long-term Liabilities section of the consolidated balance sheet.

Other information related to leases was as follows (in thousands):
June 27, 2020
Cash paid for amounts included in the measurement of lease liabilities:
Operating cash flows from operating leases 4,237 

The Company entered into one new lease during the fiscal year, resulting in a non-cash impact of $0.4 million.

Future lease payments under non-cancellable leases as of June 27, 2020 are as follows (in thousands):
Fiscal Years Ending Operating Leases
2021 $ 4,250 
2022 3,373 
2023 2,598 
2024 2,004 
2025 1,894 
Thereafter 5,674 
Total undiscounted lease payments 19,793 
Less: present value discount 2,620 
Total lease liabilities $ 17,173 

58

As previously disclosed in our Annual Report on Form 10-K for the fiscal year ended June 29, 2019 and under the previous lease accounting standard ASC 840, the aggregate future minimum payments under non-cancellable operating leases, as of June 29, 2019, are as follows (in thousands):

Fiscal Years Ending Operating Leases
2020 $ 4,777 
2021 3,563 
2022 2,641 
2023 1,866 
2024 1,271 
Thereafter 4,121 
Total minimum lease payments $ 18,239 

The Company identified certain immaterial errors in relation to its computation of its operating lease right-of-use assets and operating lease liabilities upon adoption of ASC 842, which primarily related to the improper exclusion of fixed rent escalation clauses. The errors were considered to be immaterial to previously issued quarterly reports on Form 10-Q as of September 28, 2019, December 28, 2019 and March 28, 2020. The impact of the correction on the respective balance sheets was as follows (in thousands):

September 28, 2019
Amounts as reported Adjustments Amounts as corrected
Operating lease right-of-use assets, net $ 16,056  $ 4,223  $ 20,279 
Total assets $ 281,127  $ 4,223  $ 285,350 
Operating lease liabilities - Long-term $ 10,885  $ 4,223  $ 15,108 
Total Liabilities $ 165,989  $ 4,223  $ 170,212 
December 28, 2019
Amounts as reported Adjustments Amounts as corrected
Operating lease right-of-use assets, net $ 14,876  $ 4,223  $ 19,099 
Total assets $ 273,970  $ 4,223  $ 278,193 
Operating lease liabilities - Long-term $ 9,870  $ 4,223  $ 14,093 
Total Liabilities $ 157,163  $ 4,223  $ 161,386 
March 28, 2020
Amounts as reported Adjustments Amounts as corrected
Operating lease right-of-use assets, net $ 15,347  $ 3,127  $ 18,474 
Total assets $ 288,403  $ 3,127  $ 291,530 
Operating lease liabilities - Long-term $ 10,327  $ 3,127  $ 13,454 
Total Liabilities $ 175,463  $ 3,127  $ 178,590 
59

17. SUBSEQUENT EVENT
On August 14, 2020, the Company entered into a loan and security agreement (the “Loan Agreement”) with Bank of America. The Loan Agreement replaces the Company’s prior amended and restated credit agreement, as amended, with Wells Fargo Bank, N.A. The Loan Agreement provides for a five-year asset-based senior secured revolving credit facility of up to $93 million, maturing on August 14, 2025. In addition, during the term of the Loan Agreement, the Company may increase the aggregate amount of the Credit Facility by up to an additional $25 million, subject to customary conditions, including obtaining a commitment from the Bank (or another lender, if applicable) to such increase.
The Credit Facility has been used to pay-off the Prior Credit Facility and costs related to the Loan Agreement, and may be used to pay-off certain other existing debt, to issue letters of credit, and for other business purposes, including working capital needs. Based on the Company’s borrowing base and reserve requirements and after paying off the Prior Credit Facility and related fees and expenses relating to the Credit Facility, immediately following the closing of the Loan Agreement, there was approximately $16 million available under the Credit Facility.
The Loan Agreement contains financial covenants as long as commitments or obligations are outstanding under the Loan Agreement, requiring the Company to maintain: (i) a fixed charge coverage ratio of at least 1.25 to 1.0, measured monthly on a trailing 12-month basis; and (ii) a cash flow leverage ratio of no greater than 6.00 to 1.00, which may be subject to adjustments for COVID-19 related cash expenses as approved by the Bank, measured monthly on a trailing 12-month basis.
60


Item 9: CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURES
None
Item 9A: CONTROLS AND PROCEDURES
Evaluation of Disclosure Controls and Procedures
It is the responsibility of our management to establish, maintain, and monitor disclosure controls and procedures that are designed to ensure that information required to be disclosed in our reports filed or submitted under the Securities Exchange Act of 1934 are recorded, processed, summarized, and reported within the time periods specified in the Securities and Exchange Commission rules and forms. Additionally, these disclosure controls include controls and procedures that are designed to accumulate and communicate the information required to be disclosed to our Company’s Chief Executive Officer and Chief Financial Officer, allowing for timely decisions regarding required disclosures. As of the end of the period covered by this report, our management carried out an evaluation, under the supervision and with the participation of the Chief Executive Officer and Chief Financial Officer, of the effectiveness of the design and operation of our disclosure controls and procedures pursuant to Exchange Act Rule 13a-15(f). Based on our assessment, we believe that as of June 27, 2020, the Company’s disclosure controls and procedures are effective based on that criteria.
Management’s Report on Internal Control over Financial Reporting
Our management has the responsibility to establish and maintain adequate internal controls over our financial reporting, as defined in Rule 13a-15(f) under the Securities and Exchange Act of 1934. Our internal controls are designed to provide reasonable assurance regarding the reliability of our financial reporting and the preparation of our external financial statements in accordance with generally accepted accounting principles (GAAP).
Due to inherent limitations of any internal control system, management acknowledges that there are limitations as to the effectiveness of internal controls over financial reporting and therefore recognize that only reasonable assurance can be gained from any internal control system. Accordingly, our internal control system may not detect or prevent material misstatements in our financial statements and projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.
Under the supervision and participation of management, including the Chief Executive Officer and Chief Financial Officer, we have performed an assessment of the effectiveness of our internal controls over financial reporting as of June 27, 2020. This assessment was based on the criteria established in Internal Control-Integrated Framework (2013), issued by the Committee of Sponsoring Organizations of the Treadway Commission. Based on our assessment, we believe that as of June 27, 2020, the Company’s internal control over financial reporting is effective based on that criteria.
The effectiveness of the Company's internal control over financial reporting as of June 27, 2020 has been audited by BDO USA LLP, an independent registered public accounting firm, as stated in their report which is included herein.
Changes in Internal Control over Financial Reporting
There have been no significant changes in our internal controls over financial reporting during our fourth fiscal quarter ended June 27, 2020 that have materially affected, or are reasonable likely to materially affect, the Company’s internal control over financial reporting (as defined in Exchange Act Rules 13a – 15(f) and 15d – 15(f)).
61

Report of Independent Registered Public Accounting Firm

Shareholders and Board of Directors
Key Tronic Corporation
Spokane Valley, Washington
Opinion on Internal Control over Financial Reporting

We have audited Key Tronic Corporation’s (the “Company’s”) internal control over financial reporting as of June 27, 2020, based on criteria established in Internal Control - Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission (the “COSO criteria”). In our opinion, the Company maintained, in all material respects, effective internal control over financial reporting as of June 27, 2020, based on the COSO criteria.
We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States) (“PCAOB”), the consolidated balance sheets of the Company as of June 27, 2020 and June 29, 2019, the related consolidated statements of income (loss), comprehensive income (loss), shareholders’ equity, and cash flows for each of the three years in the period ended June 27, 2020, and the related notes and schedule and our report dated September 11, 2020 expressed an unqualified opinion thereon.
Basis for Opinion
The Company’s management is responsible for maintaining effective internal control over financial reporting and for its assessment of the effectiveness of internal control over financial reporting, included in the accompanying “Item 9A, Management’s Report on Internal Control over Financial Reporting”. Our responsibility is to express an opinion on the Company’s internal control over financial reporting based on our audit. We are a public accounting firm registered with the PCAOB and are required to be independent with respect to the Company in accordance with U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.
We conducted our audit of internal control over financial reporting in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether effective internal control over financial reporting was maintained in all material respects. Our audit included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, and testing and evaluating the design and operating effectiveness of internal control based on the assessed risk. Our audit also included performing such other procedures as we considered necessary in the circumstances. We believe that our audit provides a reasonable basis for our opinion.
Definition and Limitations of Internal Control over Financial Reporting
A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.
Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.


/s/ BDO USA, LLP
Spokane, Washington
September 11, 2020
62

Item 9B: OTHER INFORMATION
None
PART III
Item 10: DIRECTORS, EXECUTIVE OFFICERS AND CORPORATE GOVERNANCE
Directors of the Registrant
Information on the nominees for election as Directors of the Company is incorporated by reference from the Company’s definitive proxy statement for the 2020 Annual Meeting of Shareholders to be filed pursuant to Regulation 14A under the Exchange Act no later than 120 days after the end of the Company’s 2020 fiscal year.
Executive Officers of the Registrant
This information is included in a separate item captioned “Executive Officers of the Registrant” in Item 1 of Part 1 of this report pursuant to Instruction G(3) of Form 10-K and Instruction 3 to Item 401(b) of Regulation S-K.
Compliance with Section 16(a) of the Exchange Act:
Incorporated by reference to Key Tronic Corporation’s 2020 Proxy Statement to Shareholders.
Code of Conduct
The Board of Directors has adopted a written Code of Conduct which applies to its directors and employees, including its executive officers. The Code of Conduct is available on the Company’s website at www.keytronic.com. The Company intends to disclose on its website any amendments to or waivers of the Code of Conduct.
Item 11: EXECUTIVE COMPENSATION
Information appearing under the caption “Executive Compensation” in the Company’s 2020 Proxy Statement is incorporated herein by this reference.
Item 12: SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND RELATED STOCKHOLDER MATTERS
The following table sets forth the aggregate information for the Company’s equity compensation plans in effect as of June 27, 2020.
EQUITY COMPENSATION PLAN INFORMATION
Plan category Number of securities to
be issued upon exercise
of outstanding options,
warrants, and rights
(a) 		Weighted-average
exercise price of
outstanding options,
warrants, and rights
(b) 		Number of securities
remaining available for
future issuance under
equity compensation
plans (excluding
securities reflected in
column (a)
(c)
Equity compensation plans approved by security holders(1)
869,583  $ 7.87  609,751 
Equity compensation plans not approved by security holders —  $ —  — 
Total 869,583  $ 7.87  609,751 
(1)Included are the 1,200,000 shares subject to the 2010 Plan, the issuance of which were approved by the shareholders at the 2010 Annual Meeting. During the 2015 Annual Meeting, an additional 1,000,000 shares were approved. As a result of the shareholder approval, the Company made the decision to amend the cash-settled SARs granted during fiscal year 2010 to stock-settled SARs effective October 21, 2011.
Information under the caption “Beneficial Ownership of Securities” in the Company’s 2020 Proxy Statement is incorporated herein by this reference.
63

Item 13: CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS, AND DIRECTOR INDEPENDENCE
Information appearing under the caption “Related Person Transactions”, “Compensation Committee Interlocks and Insider Participation”, and “Directors’ Independence” in the Company’s 2020 Proxy Statement is incorporated herein by this reference.
Item 14: PRINCIPAL ACCOUNTING FEES AND SERVICES
Information appearing under the caption “Principal Accountant Fees and Services” in the Company’s 2020 Proxy Statement is incorporated herein by this reference.
PART IV
Item 15: EXHIBITS AND FINANCIAL STATEMENT SCHEDULES
(a) 1. FINANCIAL STATEMENTS
 
2. SCHEDULES
II. Consolidated Valuation and Qualifying Accounts 69 
Other schedules are omitted because of the absence of conditions under which they are required, or because required information is given in the financial statements or notes thereto.
64

3. EXHIBITS
Exhibit No. Description
3.1
3.2
10.1*
10.2*
10.3*
10.4*
10.5*
10.6*
10.7*
10.8
10.9
10.10*
65

10.11*
10.12*
10.13
10.14
10.15
10.16
10.17*
10.18*
10.19*
10.20
10.21*
10.22*
10.23
10.24*
10.25*
66

10.26*
10.27
10.28*
10.29*
10.30*
10.31*
10.32*
10.33
10.34*
10.35
10.36
10.37*
10.38*
10.39
10.40*
67

10.41
10.42
10.43*
10.44*
21
23.1
31.1
31.2
32.1
32.2
101.INS XBRL Instance Document - the instance document does not appear in the Interactive Data File because its XBRL tags are embedded within the Inline XBRL document.
101.SCH XBRL Taxonomy Extension Schema Document **
101.CAL XBRL Taxonomy Extension Calculation Linkbase Document **
101.DEF XBRL Taxonomy Extension Definition Linkbase Document **
101.LAB XBRL Taxonomy Extension Label Linkbase Document **
101.PRE XBRL Taxonomy Extension Presentation Linkbase Document **
104 Cover Page Interactive Data File (formatted as inline XBRL with applicable taxonomy extention information contained in Exhibits 101.INS, 101.SCH, 101.CAL, 101.DEF, 101.LAB and 101.PRE)
 
* Management contract or compensatory plan or arrangement
** Pursuant to Rule 406T of Regulation S-T, these interactive data files are deemed not filed or part of a registration statement or prospectus for purposes of Sections 11 or 12 of the Securities Act of 1933, as amended, or Section 18 of the Securities and Exchange Act of 1934, as amended and otherwise are not subject to liability under those sections.
68

SCHEDULE II
KEY TRONIC CORPORATION AND SUBSIDIARIES
CONSOLIDATED VALUATION AND QUALIFYING ACCOUNTS
FISCAL YEARS ENDED JUNE 27, 2020, JUNE 29, 2019, AND JUNE 30, 2018
 
Fiscal Year Ended
2020 2019 2018
  (in thousands)
Allowance for Obsolete Inventory
Balance at beginning of year $ 1,792  $ 1,458  $ 1,306 
Provisions 136  91  31 
Dispositions 40  243  121 
Balance at end of year $ 1,968  $ 1,792  $ 1,458 
Allowance for Doubtful Accounts
Balance at beginning of year $ 58  $ —  $ 84 
Provisions (Recovery) 551  58  (84)
Write-offs —  —  — 
Balance at end of year $ 609  $ 58  $ — 

69

SIGNATURES
Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.
Dated: September 11, 2020
KEY TRONIC CORPORATION
By:   /s/ Craig D. Gates
  Craig D. Gates, President and Chief Executive Officer
(Principal Executive Officer)
Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the registrant and in the capacities and on the dates indicated:
 
/s/ Craig D. Gates    September 11, 2020
Craig D. Gates    Date
Director and President and Chief Executive Officer
(Principal Executive Officer) 		  
/s/ Brett R. Larsen    September 11, 2020
Brett R. Larsen    Date
Executive Vice President of Administration, Chief Financial Officer and Treasurer
(Principal Financial Officer) 		  
/s/ Ronald F. Klawitter September 11, 2020
Ronald F. Klawitter, Director Date
/s/ James R. Bean    September 11, 2020
James R. Bean, Director    Date
/s/ Subodh K. Kulkarni    September 11, 2020
Subodh K. Kulkarni, Director Date
/s/ Yacov A. Shamash    September 11, 2020
Yacov A. Shamash, Director    Date
/s/ Patrick Sweeney    September 11, 2020
Patrick Sweeney, Director and Chairman of the Board    Date

70
KeyTronic (NASDAQ:KTCC)
Historical Stock Chart
From Apr 2024 to May 2024 Click Here for more KeyTronic Charts.
KeyTronic (NASDAQ:KTCC)
Historical Stock Chart
From May 2023 to May 2024 Click Here for more KeyTronic Charts.