Drills 120 AgEq g/t over 48.40 metres
including 1,165 AgEq g/t over 0.33
metres
VANCOUVER, BC, May 23, 2023
/CNW/ - Avino Silver & Gold Mines Ltd. (TSX: ASM) (NYSE: ASM)
(FSE: GV6), ("Avino" or "the Company") releases the results of ten
drill holes from below Level 17, the current deepest workings of
the mine. The current drill campaign has extended our knowledge of
the continuity of the Avino Vein to a distance of 500 meters
downdip of the lowest mining level. The exploration program is
designed to test the continuity and to improve our understanding of
the potential for deeper mineralization. The extent of the
Avino Vein has been established to be at least 1,100 metres downdip
from surface outcrop. Additionally, a previously undiscovered
breccia vein was intersected approximately 15 to 30 metres below
the Avino Vein in the footwall intrusive rocks. This unit has
revealed three good intercepts (labelled INT-BX in Table 1)
including a 35 cm intercept in ET-23-05 yielding 1,165 AgEq
g/t. These intercepts warrant further follow-up to see if it
can be correlated with historic intercepts in the footwall of the
Avino Vein to determine potential continuity.
Highlights
Selected intercepts from the Avino Vein include:
- Hole ET 23-04: 122 AgEq g/t (including 0.65% Cu) over
35.73 metres true width, including 208 AgEq g/t (including 1.33%
Cu) over 5.20 metres true width, as well as 152 AgEq g/t (including
0.82% Cu) over 6.24 metres true width
- Hole ET 23-05: 120 AgEq g/t (including 0.55% Cu) over
48.40 metres true width, including 256 AgEq g/t (including 1.37%
Cu) over 1.76 metres true width, as well as 1,165 over AgEq g/t
(including 7.43% Cu) over 0.33 meters true width
- Hole ET 23-06: 141 AgEq g/t (including 0.81% Cu) over
36.00 meters true width, including 219 AgEq g/t (including 1.32%
Cu) over 14.00 metres true width
Details are shown in the table and images below.
"The ET area drilling builds on results from our 2022 drill
program as well as the January 2023
drill results as we continue to extend the area of mineralization
below Level 17," said David Wolfin,
President and CEO. "We drilled 500 metres below our current mine
workings to confirm the continuity of mineralization. As we have
come to expect with the Avino Vein, the drill intercept widths
suggest that this area will be able to be mined by our existing
low-cost bulk methods. In addition, we were delighted to discover a
new veinlet within the footwall intrusive rock that was very high
grade. We include both step out and infill drilling in this
campaign and these new step-out holes are obviously not included in
the most recent mineral resource estimate released earlier this
year."
Avino is developing a geological model based on a "near
porphyry" environment because of the increasing copper grades. The
persistence of grade continuity from surface down a plunge distance
of over 1,100 metres (800 metres vertical) supports the possibility
of a deeper mineralized system that may be linked to a deep
porphyry centre.
Geological modelling is ongoing to determine the potential
geometry and controls of the mineralization. Our drill program will
continue with an additional 4,500 meters planned for the year to
bring the total to 8,000 meters of drilling for the year.
Geological Description
The Property contains numerous
low-sulphidation epithermal veins (including the Avino vein),
breccias, stockworks, and silicified zones that grade into a
possible "near porphyry" environment within a large caldera
setting. This caldera has been uplifted by regional north-trending
block faulting (a graben structure) exposing a window of andesitic
pyroclastic rocks of a lower volcanic sequence within this caldera.
The lower volcanic sequence is overlain by an upper volcanic
sequence consisting of rhyolite to trachyte lava flows and
extensive ignimbrites. The direction of the increasing copper grade
plunges towards the east in the Avino vein. The changing tenor of
the mineralization could be reflecting a transition from epithermal
to porphyry-style mineralization.
Below Level 17
A total of ten holes were drilled below
level 17 in this drill campaign totalling 3,414 meters. They were
completed to investigate the continuity of mineralization in the
central part of the ET Area. Nine out of ten holes
intercepted mineralization within the vein and stockwork that have
silver equivalent grades above the current cut off grade in the
latest mineral resource estimate. The results and are reported
below in Table 1.
Vein-type mineralization and stockwork containing silver, gold
and copper are found along the contacts between intrusive rocks and
andesite. This provides opportunities within the ET Area for the
identification and delineation of additional mineral resources that
remain open on strike and dip (see Figure 1 for the
projections of the resource relative to the drilled holes). This
recent deeper drilling confirms that the mineralization persists
down dip significantly past the lowest developed mining level and
may prove to add substantial mineral resources.
Table 1 – Summary Drill Results
Structure
|
Hole
Number
|
From
(m)
|
To
(m)
|
Drill
Intercept
Length
(m)
|
True
width
(m)
|
Au
(g/t)
|
Ag
(g/t)
|
Cu
(%)
|
AgEq¹
(g/t)
|
AVINO
VEIN
|
ET-22-14
|
591.45
|
631.85
|
40.40
|
29.93
|
0.07
|
42
|
0.28
|
83
|
|
Including
|
598.35
|
607.80
|
9.45
|
7.00
|
0.12
|
147
|
0.56
|
226
|
AVINO
VEIN
|
ET-22-15
|
505.80
|
506.80
|
1.00
|
0.95
|
0.04
|
6
|
0.01
|
11
|
AVINO
VEIN
|
ET-22-16
|
613.80
|
670.25
|
56.45
|
37.11
|
0.06
|
9
|
0.23
|
42
|
|
Including
|
613.80
|
623.60
|
9.80
|
7.00
|
0.05
|
16
|
0.44
|
74
|
HW BX
|
ET-22-17
|
251.60
|
253.70
|
2.10
|
1.95
|
0.43
|
15
|
0.76
|
146
|
AVINO
VEIN
|
And
|
650.80
|
659.80
|
9.00
|
7.45
|
0.00
|
5
|
0.18
|
28
|
|
|
|
|
|
|
|
|
|
|
1.
AgEq in drill results above assumes $1,850/ oz Au and $22.00
oz/ Ag, and $4.00/ lb Cu, and 100% metallurgical
recovery
|
2.
HW BX = Hanging Wall Breccia and INT BX = Intrusive
Breccia
|
Structure
|
Hole
Number
|
From
(m)
|
To
(m)
|
Drill
Intercept
Length
(m)
|
True
Width
(m)
|
Au
(g/t)
|
Ag
(g/t)
|
Cu
(%)
|
AgEq¹
(g/t)
|
|
|
|
|
|
|
|
|
|
|
HW BX
|
ET-23-01
|
223.35
|
228.05
|
4.70
|
4.65
|
0.38
|
29
|
0.33
|
102
|
AVINO
VEIN
|
And
|
456.25
|
507.60
|
51.35
|
43.80
|
0.15
|
19
|
0.37
|
77
|
|
Including
|
473.40
|
475.40
|
2.00
|
1.70
|
0.62
|
27
|
0.70
|
166
|
INT-BX
|
And
|
516.90
|
519.90
|
3.00
|
2.61
|
0.06
|
75
|
2.58
|
401
|
HW BX
|
ET-23-02
|
205.20
|
207.85
|
2.65
|
2.50
|
0.34
|
12
|
0.33
|
82
|
AVINO
VEIN
|
And
|
514.55
|
540.90
|
26.35
|
19.90
|
0.02
|
30
|
1.29
|
193
|
|
Including
|
525.65
|
536.65
|
11.00
|
8.23
|
0.74
|
54
|
2.24
|
395
|
HW BX
|
ET-23-03B
|
280.15
|
283.65
|
3.50
|
3.10
|
0.46
|
23
|
0.32
|
103
|
AVINO
VEIN
|
And
|
681.50
|
685.05
|
3.55
|
3.00
|
0.99
|
34
|
0.08
|
127
|
|
Including
|
681.50
|
682.50
|
1.00
|
0.83
|
3.40
|
67
|
0.24
|
383
|
HW BX
|
ET-23-04
|
158.90
|
164.85
|
5.95
|
5.58
|
0.13
|
19
|
0.22
|
57
|
AVINO
VEIN
|
And
|
406.50
|
448.65
|
42.15
|
35.73
|
0.14
|
28
|
0.65
|
122
|
|
Including
|
412.95
|
419.60
|
6.65
|
5.20
|
0.19
|
27
|
1.33
|
208
|
|
Including
|
438.00
|
445.20
|
7.20
|
6.24
|
0.13
|
39
|
0.82
|
152
|
AVINO
VEIN
|
ET-23-05
|
435.70
|
486.95
|
51.25
|
48.40
|
0.08
|
45
|
0.55
|
120
|
|
Including
|
443.70
|
446.05
|
2.35
|
1.76
|
0.07
|
79
|
1.37
|
256
|
|
Including
|
447.80
|
452.10
|
4.30
|
3.84
|
0.16
|
80
|
0.75
|
187
|
INT-BX
|
And
|
495.50
|
495.85
|
0.35
|
0.33
|
0.10
|
231
|
7.43
|
1,165
|
AVINO VEIN
|
ET-23-06
|
401.25
|
446.85
|
45.60
|
36.00
|
0.16
|
27
|
0.81
|
141
|
|
Including
|
421.15
|
438.90
|
17.75
|
14.00
|
0.25
|
34
|
1.32
|
219
|
INT-BX
|
And
|
446.85
|
448.60
|
1.75
|
1.30
|
0.05
|
97
|
2.28
|
385
|
|
|
|
|
|
|
|
|
|
|
Sampling and Assay Methods
Following detailed
geological and geotechnical logging, selected drill core areas were
cut in half. One half of the core was submitted to the SGS
Laboratory facility in Durango,
Mexico, and the other half was retained on-site for
verification and reference. Gold is assayed by fire assay with an
AA finish. Any samples exceeding 3.0 gold grams/tonne are
re-assayed and followed by a gravimetric finish. Multi-element
analyses are also completed for each sample by SGS ICP14B methods.
Any copper values exceeding 10,000 ppm (1%) are assayed using ICP
90Q. Silver is fire assayed with a gravimetric finish for samples
assaying over 100 grams/tonne. Avino uses a series of standard
reference materials, blank reference materials, and duplicates as
part of their QA/QC program during assaying.
Qualified Person(s)
Avino's projects in Durango, Mexico are under the geoscientific
oversight of Michael F. O'Brien,
P.Geo., Senior Principal Consultant, Red Pennant Communications,
and under the supervision of Peter
Latta, P.Eng, Avino's VP, Technical Services, who are both
qualified persons within the context of NI 43-101. Both have
reviewed and approved the technical data in this news release.
About Avino
Avino is a silver producer from its wholly
owned Avino Mine near Durango,
Mexico. The Company's silver, gold and copper production
remains unhedged. The Company's mission and strategy is to create
shareholder value through its focus on profitable organic growth at
the historic Avino Property and the strategic acquisition of the La
Preciosa property. Avino currently controls mineral resources, as
per NI 43-101, that total 368 million silver equivalent ounces,
within our district-scale land package. We are committed to
managing all business activities in a safe, environmentally
responsible, and cost-effective manner, while contributing to the
well-being of the communities in which we operate. We encourage you
to connect with us on Twitter at @Avino and on LinkedIn at Avino
Silver & Gold Mines. To view the Avino Mine VRIFY tour, please
click here.
On Behalf of the Board
"David Wolfin"
________________________________
David Wolfin
President & CEO
Avino Silver & Gold Mines Ltd.
This news release contains "forward-looking information" and
"forward-looking statements" (together, the "forward looking
statements") within the meaning of applicable securities laws and
the United States Private Securities Litigation Reform Act of 1995,
including the mineral resource estimate for the Company's Avino
Property, including La Preciosa, located near Durango in
west-central Mexico (the "Avino
Property") with an effective date of November 30, 2022, prepared for the Company, and
references to Measured, Indicated, Inferred Resources referred to
in this press release. These forward-looking statements are made as
of the date of this news release and the dates of technical
reports, as applicable. Readers are cautioned not to place undue
reliance on forward-looking statements, as there can be no
assurance that the future circumstances, outcomes or results
anticipated in or implied by such forward-looking statements will
occur or that plans, intentions or expectations upon which the
forward-looking statements are based will occur. While we have bas
ed these forward-looking statements on our expectations about
future events as at the date that such statements were prepared,
the statements are not a guarantee that such future events will
occur and are subject to risks, uncertainties, assumptions and
other factors which could cause events or outcomes to differ
materially from those expressed or implied by such forward-looking
statements. Such factors and assumptions include, among others, the
effects of general economic conditions, the price of gold, silver
and copper, changing foreign exchange rates and actions by
government authorities, uncertainties associated with legal
proceedings and negotiations and misjudgments in the course of
preparing forward-looking information. In addition, there are known
and unknown risk factors which could cause our actual results,
performance or achievements to differ materially from any future
results, performance or achievements expressed or implied by the
forward-looking statements. Known risk factors include risks
associated with project development; the need for additional
financing; operational risks associated with mining and mineral
processing; the COVID-19 pandemic; volatility in the global
financial markets; fluctuations in metal prices; title matters;
uncertainties and risks related to carrying on business in foreign
countries; environmental liability claims and insurance; reliance
on key personnel; the potential for conflicts of interest among
certain of our officers, directors or promoters with certain other
projects; the absence of dividends; currency fluctuations;
competition; dilution; the volatility of the our common share price
and volume; tax consequences to U.S. investors; and other risks and
uncertainties. Although we have attempted to identify important
factors that could cause actual actions, events or results to
differ materially from those described in forward-looking
statements, there may be other factors that cause actions, events
or results not to be as anticipated, estimated or intended. There
can be no assurance that forward-looking statements will prove to
be accurate, as actual results and future events could differ
materially from those anticipated in such statements. Accordingly,
readers should not place undue reliance on forward-looking
statements. We are under no obligation to update or alter any
forward-looking statements except as required under applicable
securities laws. For more detailed information regarding the
Company including its risk factors, investors are directed to the
Company's Annual Report on Form 40-F and other periodic reports
that it files with the U.S. Securities and Exchange Commission.
References to Measured & Indicated Mineral Resources and
Inferred Mineral Resources in this press release are terms that are
defined under Canadian rules by National Instrument 43-101 ("NI
43-101"). On October 31, 2018,
the US Securities and Exchange Commission adopted Item 1300 of
Regulation S-K ("Regulation SK-1300") to modernize the property
disclosure requirements for mining registrants, and related
guidance, under the Securities Act of 1933 and the Securities
Exchange Act of 1934. All registrants are required to comply
with Regulation SK-1300 for fiscal years ending after January 1, 2021. Accordingly, the Company
must comply with Regulation SK-1300 for its fiscal year ending
December 31, 2021, and thereafter,
and the Company will no longer utilize Industry Guide 7.
Regulation SK-1300 uses the Committee for Mineral Reserves
International Reporting Standards ("CRIRSCO") based classification
scheme for mineral resources and mineral reserves, that includes
definitions for inferred, indicated, and measured mineral
resources. U.S. Investors are cautioned not to assume that
any part of the mineral resources in these categories will ever be
converted into probable or proven mineral reserves within the
meaning of Regulation S-K 1300.
View original content to download
multimedia:https://www.prnewswire.com/news-releases/avino-vein-extended-a-further-500-metres-301830106.html
SOURCE Avino Silver & Gold Mines Ltd.