JSPR Jasper Therapeutics Inc

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-K

(Mark One)

☒ ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the fiscal year ended December 31, 2023

OR

☐ TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the transition period from ______________ to ______________

Commission File Number: 001-39138

JASPER THERAPEUTICS, INC.

(Exact name of registrant as specified in its charter)

Securities registered pursuant to Section 12(b) of the Act:

Securities registered pursuant to section 12(g) of the Act: None

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes ☐ No ☒

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes ☐ No ☒

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes ☒ No ☐

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§ 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files). Yes ☒ No ☐

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and “emerging growth company” in Rule 12b-2 of the Exchange Act.

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐

Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit report. ☐

If securities are registered pursuant to Section 12(b) of the Act, indicate by check mark whether the financial statements of the registrant included in the filing reflect the correction of an error to previously issued financial statements. ☐

Indicate by check mark whether any of those error corrections are restatements that required a recovery analysis of incentive-based compensation received by any of the registrant’s executive officers during the relevant recovery period pursuant to §240.10D-1(b). ☐

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act). Yes ☐ No ☒

The aggregate market value of the voting and non-voting common equity held by non-affiliates of the registrant as of June 30, 2023 (the last business day of the registrant’s most recently completed second fiscal quarter) was approximately $110.5 million based on the closing price of the registrant’s common stock on June 30, 2023 of $13.70 (after giving effect to the 1-for-10 reverse stock split effected on January 4, 2024) per share, as reported by the Nasdaq Capital Market.

As of February 26, 2024, the number of shares of the registrant’s common stock outstanding was 15,063,896 shares of voting common stock, $0.0001 par value per share, and no shares of non-voting common stock, $0.0001 par value per share.

DOCUMENTS INCORPORATED BY REFERENCE

TABLE OF CONTENTS

JASPER THERAPEUTICS, INC.

As used in this Annual Report on Form 10-K, unless the context requires otherwise, references to the “Company”, “Jasper”, “we”, “us”, “our”, and similar terms refer to Jasper Therapeutics, Inc., a Delaware corporation formerly known as Amplitude Healthcare Acquisition Corporation (“AMHC”), and its consolidated subsidiary. References to “Old Jasper” refer to the private Delaware corporation that is now our wholly-owned subsidiary and named Jasper Tx Corp. (formerly known as Jasper Therapeutics, Inc.).

On September 24, 2021, we consummated the previously announced Business Combination (pursuant to the Business Combination Agreement, dated May 5, 2021, by and among AMHC, Ample Merger Sub, Inc. (“Merger Sub”) and Old Jasper). Pursuant to the terms of the Business Combination Agreement, a business combination (herein referred to as the “Business Combination” or “Reverse Recapitalization” for accounting purposes) between AMHC and Old Jasper was effected through the merger of Merger Sub with and into Old Jasper with Old Jasper surviving as AMHC’s wholly-owned subsidiary. In connection with the Business Combination, AMHC changed its name from Amplitude Healthcare Acquisition Corporation to Jasper Therapeutics, Inc.

Unless otherwise noted or the context requires otherwise, references to our “common stock” refer to our voting common stock, par value $0.0001 per share. In addition, except as otherwise indicated, all information in this Annual Report on Form 10-K gives effect to the 1-for-10 reverse stock split of the common stock that was effected on January 4, 2024.

CAUTIONARY NOTE REGARDING FORWARD-LOOKING STATEMENTS

Certain statements contained in this Annual Report on Form 10-K may constitute “forward-looking statements” for purposes of federal securities laws. Such statements can be identified by the fact that they do not relate strictly to historical or current facts. In addition, any statements that refer to projections, forecasts or other characterizations of future events or circumstances, including any underlying assumptions, are forward-looking statements. The words “anticipate,” “believe,” “contemplate,” “continue,” “could,” “estimate,” “expect,” “intends,” “may,” “might,” “plan,” “possible,” “potential,” “predict,” “project,” “should,” “will,” “would” and similar expressions (including the negative of any of the foregoing) may identify forward-looking statements, but the absence of these words does not mean that a statement is not forward-looking.

Forward-looking statements in this Annual Report on Form 10-K may include, for example, but are not limited to, statements about:

These forward-looking statements are based on current expectations and beliefs concerning future developments and their potential effects. There can be no assurance that future developments affecting us will be those that we have anticipated. These forward-looking statements involve a number of risks, uncertainties (some of which are beyond our control) or other assumptions that may cause actual results or performance to be materially different from those expressed or implied by these forward-looking statements. These risks and uncertainties include, but are not limited to, those factors described under the heading “Risk Factors” in this Annual Report on Form 10-K. Should one or more of these risks or uncertainties materialize, or should any of our assumptions prove incorrect, actual results may vary in material respects from those projected in these forward-looking statements. There may be additional risks that we consider immaterial or which are unknown. It is not possible to predict or identify all such risks. Readers are cautioned not to place undue reliance on forward-looking statements because of the risks and uncertainties related to them and to the risk factors. We do not undertake any obligation to update or revise any forward-looking statements, whether as a result of new information, future events or otherwise, except as may be required under applicable securities laws.

PART I

ITEM 1. BUSINESS

Overview 

We are a clinical-stage biotechnology company focused on developing therapeutics targeting mast cell driven diseases such as Chronic Spontaneous Urticaria (“CSU”) and Chronic Inducible Urticaria (“CIndU”). We also have ongoing programs in diseases where targeting diseased hemopoietic stem cells can provide benefits, such as Lower to Intermediate Risk Myelodysplastic Syndrome (“LR-MDS”), and stem cell transplant conditioning regimens.

Our lead product candidate, briquilimab, is a monoclonal antibody designed to block stem cell factor (“SCF”) from binding to and signaling through the CD117 (“c-Kit”) receptor on mast and stem cells. The SCF/c-Kit pathway is a survival signal for mast cells and we believe that blocking this pathway may lead to depletion of these cells from skin, which could lead to significant clinical benefit for patients with mast-cell driven diseases such as chronic urticarias. To that end, we have commenced a Phase 1b/2a clinical study in CSU, are commencing a Phase 1b/2a clinical study in CIndU and are evaluating the potential for briquilimab in other mast cell driven diseases.

We also believe that utilizing briquilimab to block SCF binding and signaling can result in the depletion of diseased hematopoietic stem cells (“HSCs”) from the bone marrow in certain hematologic malignancies such as myelodysplastic syndrome (“MDS”), and as a result, we are currently enrolling a Phase 1 trial evaluating briquilimab as a second-line therapy in patients with LR-MDS. We are also developing briquilimab as a one-time conditioning therapy for severe combined immunodeficiency (“SCID”) patients undergoing a second stem cell transplant for which we are currently conducting a Phase 1/2 clinical trial. Briquilimab is also being studied by our academic and institutional partners, Stanford University and the National Institutes of Health, in other transplant settings, including Fanconi Anemia (“FA”), sickle cell disease (“SCD”), chronic granulomatous disease and GATA-2 Type MDS.

We intend to become a fully integrated discovery, development and commercial company in the field of mast cell therapeutics. We are developing our product candidates to be used individually or, in some cases, in combination with other therapeutics. Our goal is to advance our product candidates through regulatory approval and bring them to the commercial market based on the data from our clinical trials and communications with regulatory agencies and payor communities. We expect to continue to broaden our pipeline with additional mast cell indications and next-generation products by leveraging our research organization.

We have an exclusive license agreement with Amgen Inc. (“Amgen”) for the development and commercialization of the briquilimab monoclonal antibody in all indications and territories worldwide. We also have an exclusive license agreement with Stanford for the right to use briquilimab in the clearance of diseased stem cells prior to the transplantation of HSCs.

Briquilimab

We believe briquilimab is a unique, humanized, monoclonal antibody that targets the underlying biology of mast cell survival to potentially serve as a therapeutic to prevent mast cell driven diseases. In addition we believe briquilimab targets a key differentiation pathway for HSCs and may be developed to improve the efficacy and safety of hematopoietic stem cell transplantation. Briquilimab binds to human c-Kit, the receptor for SCF, which is expressed on the surface of various cells, including mast cells and hematopoietic stem and progenitor cells. The interaction of SCF and c-Kit is required for mast cells to survive and for HSCs to remain in the bone marrow. By blocking SCF from binding to c-Kit and disrupting these critical signals, briquilimab leads to the depletion of mast cells in the skin and the differentiation of stem cells in the bone marrow. Briquilimab is designed to bind to c-Kit with a greater affinity than SCF.

The monoclonal antibody isotype and other modifications of briquilimab were chosen carefully to retain high affinity binding to the c-Kit receptor and SCF signal blockade without recruiting other immune cells that could lead to receptor activation, mast cell degranulation or other off-target toxicities. For example, designing briquilimab as an IgG1 isotype instead of an IgG2 isotype results in more potent inhibition of c-Kit, potentially increasing the effect on mast cell depletion. Briquilimab was also designed to be aglycosylated in order to eliminate the recruitment of other immune effector cells that may bring unwanted effects to any cell that expresses c-Kit. This finding and other data demonstrate that not all anti-c-Kit antibodies behave equally or have the same mechanism of action.

We are focused on advancing Briquilimab in development as a chronic therapy in mast cell driven diseases such as CSU, CIndU and other mast cell driven indications currently under evaluation. We also currently have an ongoing study in LR-MDS, as well as a study as a conditioning agent to clear HSCs from the bone marrow prior to re-transplant in patients with SCID. We partnered with the National Institutes of Health (the “NIH”) and Stanford University in several investigator sponsored trials for patients with a variety of diseases undergoing hematopoietic stem cell transplant. 

Briquilimab as a Primary Therapeutic for Disorders of Mast Cells

Mast cells are primary cells of the immune system derived from HSCs in the bone marrow. Mast cells store a number of different chemical mediators such as tryptase, histamine, interleukins and heparin in granules found throughout the cell. When a mast cell is triggered, such as by an allergen specific to membrane-bound Immunoglobulin E (“IgE”) antibodies, the mast cell is activated and releases the content of the granules into the surrounding tissue. These chemical mediators attract other immune cells to help with any response as well as produce a local allergic reaction consisting of inflammation, swelling, contraction of smooth muscle and increased mucus secretion. Mast cells are usually long-lived and found at boundaries to the external environment such as the skin, mucosal surfaces of the gut and lungs and eye.

Dysfunctional regulation and activation of mast cells is thought to be a significant driver of multiple diseases, including urticarias, asthma, prurigo nodularis, allergic eye disease and others. Each of these diseases has been shown to have local concentrations of mast cells, cellular response consistent with mast cell degranulation and disease modification with use of antihistamines. Unfortunately, currently approved agents targeting mast cells in these diseases are ineffective in many patients, leading to continued high disease burden.

Briquilimab blocks signaling on the c-Kit receptor by inhibiting the binding of SCF, the ligand for the c-Kit receptor. The interaction of SCF/c-Kit on mast cells is critical for development, proliferation and survival. Without continued signaling through c-Kit, mast cells will undergo apoptosis and die. We have shown that a single subcutaneous dose of briquilimab leads to depletion of mast cells in the skin of healthy human volunteers for at least 29 days. We believe that depletion of mast cells in the skin of patients with chronic urticaria or other mast cell driven diseases has the potential to lead to improved disease control for those patients without adequate response to current therapies. 

Figure 1 – Healthy volunteers administered single doses of briquilimab 42 mg to 280 mg subcutaneously received punch skin biopsies to evaluate the decreases in mast cells at 4 weeks after briquilimab was administered compared to the baseline.

Figure 2 – Healthy volunteers administered single doses of briquilimab at the indicated doses and routes received punch skin biopsies to evaluate the number of mast cells present at the indicated time points.

Briquilimab in Chronic Urticaria

Mast cells are immune cells that play a key role in the inflammatory response to pathogens or injury and are typically found in the skin, lungs, digestive track, conjunctiva of the eye and the mucosal linings of the mouth and nose. Typically, mast cells are triggered by a specific antigen or antibody interaction to release histamine, a variety of cytokines and other chemical mediators in order fight a potential infection and to recruit additional types of immune cells to aid in the body’s response. However, with certain diseases, such as CSU, CIndU, allergic asthma, prurigo nodularis and eosinophilic esophagitis, the mast cell response is dysregulated and may lead to unwanted responses such as hives, itching, airway constriction or conjunctivitis. Current therapeutic approaches to controlling mast cell response include antihistamines to counteract the release of histamine by activated mast cells and anti-IgE antibody therapy to try to eliminate the antibodies responsible for a trigger of mast cell activation. We believe that new chronic therapies that target mast cells could be beneficial in treating many diseases that are a function of mast cell dysfunction.

In late 2023, we commenced a Phase 1b/2a clinical study in patients with CSU. CSU is a disorder of mast cells in the skin in which patients experience swelling, redness and itching of the skin that lasts at least six weeks due to either an unknown cause, Type I autoimmunity with Immunoglobulin E antibodies (“IgE”) against self or Type IIb autoimmunity with activating antibodies directed at mast cells. CSU is thought to affect over five million patients in the United States, France, Germany, Italy, Spain, and the United Kingdom. The U.S. Food and Drug Administration (the “FDA”)-approved drug therapy for CSU includes second generation H1-antihistamines for first line use followed by consideration for use of omalizumab, a monoclonal antibody directed at circulating IgE. The biologic rationale for both of these therapies is based on modulating mast cell response. Antihistamines work to counteract the effects of histamine that is released from activated mast cells and omalizumab is designed to reduce IgE, which is thought to be a trigger of mast cell activation. Based on human healthy volunteer clinical data showing that briquilimab can deplete mast cells from the skin and from data in a study of CSU patients showing that an anti- c-Kit antibody can control disease symptoms, we believe that briquilimab could be effective therapy for CSU patients. The Phase 1b/2a study is a monotherapy study being conducted in CSU patients who are refractory to antihistamine therapy and who have had an inadequate response to omalizumab. The study design has three parts. The first part is an open-label 3+3 dose escalation with two dose cohorts (10mg and 40mg). The second part consists of four dose cohorts (80mg Q8W, 120mg Q8W, 120mg Q12W and 180mg Q12W) in a double-blind placebo controlled format. The final part is a single dose cohort (240 mg single-dose) in a double-blind placebo controlled format.

Figure 3 – Study Design for the Phase 1b/2a CSU Study

We are also commencing a Phase 1b/2a clinical study in patients with CIndU. Similar to CSU, CIndU is a disorder of mast cells in the skin in which patients experience swelling, redness and itching of the skin that lasts at least six weeks, but CIndU is induced by specific physical or environmental stimuli, including cold, heat, exercise, pressure, sunlight and others. CIndU includes physical urticarias, such as symptomatic dermographism and cold urticaria, as well as non-physical urticarias caused by exposure to specific stimuli, such as cholinergic urticaria and aquagenic urticaria.

The FDA-approved drug therapy for CIndU consists solely of second generation H1-antihistamines. The biologic rationale for this therapy is based on modulating mast cell response. Antihistamines work to counteract the effects of histamine that is released from activated mast cells. CIndU is thought to affect over two million patients in the United States, France, Germany, Italy, Spain and the United Kingdom. Approximately 40% of these patients’ CIndU is not controlled by first line antihistamines and these patients could be eligible for biologic therapy depending on disease severity. Based on preclinical and human healthy volunteer clinical data showing that briquilimab can deplete mast cells from the skin, we believe that briquilimab could be an effective therapeutic for CIndU patients. The Phase 1b/2a study is a monotherapy study being conducted in CIndU patients who are refractory to antihistamine therapy. The study design contains a single dose in two dosing cohorts (40mg and 120mg) with a provocation test measured at 12 weeks post-dosing.

Figure 4 – Study Design for the Phase 1b/2a CIndU Study

Briquilimab in Other Mast Cell Disorders

Mast cells may also be the key cellular target for a number of other inflammatory or autoimmune diseases outside of the chronic urticarias such as allergic asthma, atopic dermatitis, eosinophilic esophagitis or prurigo nodularis.

Allergic asthma is a form of asthma triggered by specific allergens that leads to constriction of smooth muscles in the airways, cellular infiltration of various immune mediators and excess production of mucus. Patients with allergic asthma may have an increased number of mast cells in the bronchi and may be responsive to agents that modulate mast cell response, including antihistamines and anti IgE monoclonal antibody therapy.

Atopic dermatitis is a chronic disease that causes inflammation, redness, and irritation of the skin. It is a common condition that usually begins in childhood; however, anyone can get the disease at any age. Atopic dermatitis causes the skin to become extremely itchy. In most cases, there are periods of time when the disease is worse, called flares, followed by periods when the skin improves or clears up entirely, called remissions. Treatments include moisturizers, topical steroids, immunomodulators (tacrolimus and pimecrolimus) and biologic therapies (dupilumab). Mast cells may play an important role in the disease and agents that modulate mast cells may provide benefit to patients.

Eosinophilic esophagitis is an immune disorder leading to build up of eosinophils in the esophagus and causes difficulty in eating, chronic reflux and/or the sensation of heartburn. Along with the buildup of eosinophils, there is typically buildup of other immune cells in the affected area including mast cells, basophils and lymphocytes. Patients may be treated with changes to diet, use of proton pump inhibitors, antihistamines and dupilumab.

Prurigo Nodularis is also a disease that manifests in the skin. Patients develop severe itch and firm bumps on the skin, called nodules, that may lead to loss of sleep and bleeding due to scratching. Degranulation of mast cells in the skin is thought to trigger peripheral sensory neurons in the skin leading to itch. Various medications are used to treat Prurigo Nodularis including anti-itch creams and topical steroids. For cases that remain uncontrolled physicians may prescribe antihistamines or biologics such as dupilumab.

We are currently engaged in pre-clinical evaluation of briquilimab as a potential therapeutic in these and a number of other mast cell driven diseases and expect to continue to expand our portfolio of mast cell indications in clinical development moving forward.

Briquilimab as a Primary Therapeutic for Lower Risk Myelodysplastic Syndrome

A transforming event in HSCs can produce several different malignancies. Cancer stem cells can self-renew, have a prolonged survival rate and have the ability to give rise to cells with more differentiated characteristics. The idea that cancer is primarily driven by a smaller population of stem cells has important implications. For instance, many chemotherapies can shrink tumors or deplete downstream differentiated cells, but if the chemotherapies do not kill the cancer stem cells, the tumor will grow back.

It has been shown that HSCs are the disease-initiating cells in cancers like MDS and that these pathogenic MDS HSCs outcompete normal HSCs present in the bone marrow of affected patients. Furthermore, these disease-initiating HSCs express c-Kit and anti-c-Kit antibodies can target and eradicate these pathogenic cells. This is especially significant in a disease like LR-MDS where available therapies either lack disease-modifying activity or possess off-target toxicity. Development of anti-c-Kit monoclonal antibodies, which might be safely used to preferentially target MDS clones, would represent a major step forward for the treatment of this disease.

MDS is a mixed group of hematological disorders characterized by decreased production of healthy blood and/or immune cells by the hematologic stem cells and eventual progression to acute myeloid leukemia (“AML”). Patients with LR-MDS are typically treated with blood transfusions to augment poor bone marrow stem cell function or with growth factors, such as erythropoietin, to stimulate any remaining healthy bone marrow cells to increase production of blood or immune cells. The goals of current treatments are to delay the progression of the disease to AML and for an eventual donor stem cell transplant for eligible patients. Approximately 29,000 patients are diagnosed with MDS annually in the major global markets. Of all newly diagnosed MDS patients, about 70% have low to intermediate risk disease. About half of these patients cannot maintain adequate hemostasis and become dependent on blood or platelet transfusion and may be eligible for erythropoietin stimulating agents. These patients may still maintain an adequate number of healthy stem cells to support normal hemostasis; however, because the diseased stem cells have taken over most of the bone marrow, there is no room for the healthy stem cells to undergo the expansion needed for normal hemostasis. We believe that treatment with briquilimab has the potential to open adequate space in the bone marrow for healthy stem cells to expand and restore normal hemostasis.

Briquilimab and other anti-c-Kit monoclonal antibodies have been shown to deplete normal and diseased MDS human hematopoietic stem cells in clinical and pre-clinical studies. Scientists at Stanford showed that briquilimab is capable of depleting MDS HSCs in vivo in a xenografted mouse model. New data from our MDS/AML trial of briquilimab as a conditioning agent have revealed that the antibody can have a direct depletion effect on CD34+CD45RA-c-Kit+ cells prior to administration of fludarabine or radiation. In studies in non-human primates and healthy human volunteers, administration of a single dose of briquilimab resulted in limited depletion of healthy HSCs followed by recovery in approximately six weeks. By depleting diseased hematopoietic stem cells, we believe that briquilimab may allow for preferential recovery of healthy HSCs and restoration of normal hematopoiesis.

These preclinical studies of immune deficient mice engrafted with MDS HSCs from patients with “high-risk and very high-risk disease” per the Revised International Prognostic Scoring System (“IPSS-R”) criteria demonstrate the utility of anti-c-Kit antibodies in the treatment of MDS. Mice xenografted with higher-risk MDS HSCs were treated with anti-human c-Kit monoclonal antibody (“mAb”), SR-1 (the parent clone to briquilimab). Initial studies showed administration of either SR-1 or briquilimab resulted in well-tolerated and sustained depletion of MDS cells obtained from lower-risk MDS patients. Treatment of mice xenografted with higher-risk MDS HSCs cells resulted in transient depletion (Figure 5). Given the transient depletion of higher-risk MDS cells, studies were conducted to determine whether an anti-c-Kit antibody followed by a normal human HSC allograft would lead to long-term disease amelioration of higher-risk disease. Results showed greater than 95% cytogenetically normal CD45+ cells 12 weeks after allograft transplant (Figure 5).

Figure 5: (A) c-Kit mAb depletes MDS stem cells as demonstrated by decreasing HSC chimerism over time. (B) Normal stem cell engraftment occurs after stem cell depletion as shown by greater than 95% cytogenetically normal CD45+ cells 12 weeks after transplant in four higher-risk MDS-xenografted mice. (C) Normal blood formation results after stem cell engraftment with human cell lineages for T cells (CD3+), B cells (CD19+) and myeloid cells (CD13/33+) in the bone marrow of the four high-risk mice.

We are evaluating briquilimab as a therapeutic for certain MDS patients. IPSS-R is a clinical assessment tool used to evaluate risk and prognosis of newly diagnosed patients. Patients with IPSS-R scores of low or very low are not typically referred to stem cell transplant due to the risk of transplant-related toxicities from current conditioning regiments, infection and graft vs host Disease (“GvHD”) outweighing the patient’s expected survival with drug therapies. These patients typically suffer from anemia, thrombocytopenia or neutropenia and are given drug therapies such as an erythropoiesis stimulating agent (“ESA”) to stimulate production of new cells to correct their blood deficiency. However, these agents do not target the diseased hematopoietic stem cell and patients who become refractory to ESA are dependent on routine blood transfusions, which are associated with poor survival rates. ESA refractory lower-risk MDS patients have few treatment options and are a clinical unmet need. We are currently enrolling a Phase 1 clinical study of briquilimab monotherapy in lower-risk MDS patients. The study is a standard 3+3 dose escalation study dosing patients every 8 weeks, commencing at 0.3mg/kg and potentially proceeding to doses of 0.6 mg/kg, 0.9mg/kg and 1.2mg/kg. Initial data in this study is expected to be presented in 2024.

Briquilimab as a Conditioning Agent for SCID Patients Undergoing Re-Transplantation

We are also developing briquilimab as a conditioning agent for SCID patients undergoing a stem cell re-transplantation. Due to genetic errors at birth, SCID patients do not possess fully functional immune systems, which results in chronic infections, failure to thrive and significantly decreased lifespans. If available, these patients are typically given a transplant from a close relative with the goal of allowing healthy donor stem cells to establish in the patient’s bone marrow, leading to production of normal immune cells. However, stem cell transplants are not universally successful. SCID patients with poor transplant outcomes are typically dependent on external therapies such as intravenous immunoglobin (“IVIG”) and often have poor immunity, leading to chronic infections and decreased lifespans. SCID patients who fail transplant are not usually given a second transplant due to their fragile health and the significant toxicities of current conditioning agents.

SCID is a genetically heterogeneous group of over 20 monogenic conditions of the immune system characterized by the lack of normal T lymphocyte development, in addition to deficiencies of B cells, NK cells, or both in some forms which is currently curable only by HCT. The incidence of SCID is estimated at one in 80,000 live births across all ethnic groups. Due to the toxicities associated with the current chemotherapy regimens used in standard allogeneic HCT to deplete endogenous HSC, some centers do not use conditioning regimens. SCID patients who undergo unconditioned HCT have relatively improved overall survival but often experience incomplete immune reconstitution characterized by inadequate T cell numbers and/or ongoing deficiency of B cell humoral immunity. This issue occurs more frequently in those patients who do not have a human leukocyte antigen-matched donor and who therefore receive T cell depleted haploidentical donor grafts.

Patients who receive full or reduced doses of busulfan conditioning (a DNA damaging drug) tend to engraft well and have full lymphocyte reconstitution. However, due to busulfan’s off-target toxic effects, these patients experience both short- and long-term complications. Since these patients typically receive busulfan as infants, they experience chronic complications such as growth retardation, cognitive defects, craniofacial abnormalities, liver toxicity, seizures and endocrine defects, including infertility, and increased cancer risk.

Pre-clinical Data for Briquilimab for Severe Combined Immunodeficiency Re-Transplantation

The ability of briquilimab to open a human hematopoietic stem cell niche was evaluated in humanized immune deficient mice that were stably engrafted with human hematopoietic grafts at Stanford. Two weeks after a single treatment with 0.3 mg/kg or 1.0 mg/kg of briquilimab, mice showed depletion of human HSCs and progenitor cells (CD45+CD34+c-Kit+) in the bone marrow.

To model human transplantation with a briquilimab-based conditioning regimen, humanized immune deficient mice that had been stably engrafted with human hematopoietic cells underwent a second transplant using conditioning with briquilimab. The second human HSC graft was transduced with a lentiviral vector expressing fluorescent mCitrine to allow assessment of its engraftment. mCitrine-marked second human donor cells were observed in all mice treated with briquilimab, whereas no evidence of second human donor cells were found in unconditioned mice, demonstrating that briquilimab conditioning permitted second donor HSC engraftment.

Clinical Data for Briquilimab for Severe Combined Immunodeficiency Re-Transplantation

We have an ongoing Phase 1/2 dose escalation open label clinical trial to evaluate briquilimab as the sole conditioning agent to achieve HSC engraftment in SCID patients undergoing stem cell re-transplantation. The primary endpoint in Phase 1 is to assess the safety and tolerability of briquilimab as a conditioning agent in SCID patients.  The two primary efficacy endpoints defined in the Phase 2 study are the proportion of patients achieving adequate donor HSC engraftment and the proportion of patients achieving naïve CD4+ T cell production greater than or equal to 85 cells/uL, a level expected to provide immune reconstitution, during weeks 36 to 104 post-transplant. Secondary endpoints include durability of naïve T cell production, incidence and severity of GvHD, hematopoietic recovery and pharmacokinetic properties of briquilimab. Patients receive a single intravenous infusion of briquilimab on study day 0 in one of four dose cohorts: 0.1 mg/kg, 0.3 mg/kg, 0.6mg/kg or 1.0 mg/kg. Patients will be followed for five years following transplant. This trial is currently open for enrollment at multiple clinical trial sites in the United States.

Other studies have shown that SCID patients who fail to achieve durable donor cell engraftment from a first transplant may not be candidates for a second transplant using current conditioning agents due to the toxicity of the conditioning regimen and fragile nature of most SCID patients. These patients may remain on medically supportive immune therapies such as intravenous immunoglobulin (“IVIG”) or receive an unconditioned “boost” transplant of donor cells which does not lead to sustained production of new immune cells.

We believe briquilimab has enabled immune reconstitution for patients based on naïve CD4+ T-cell levels and has shown clinical benefit in T-B- SCID patients in a re-transplant setting. Patients have shown resolution of chronic infections, independence from or reduction of IVIG therapy and antibody response to vaccine challenge. Through December 31, 2023 in this open label clinical trial, eleven T-B- SCID re-transplant patients have been treated in the ongoing SCID Phase 1/2 study. Seven of the eleven transplanted patients with 1 - 5 years of follow-up have shown engraftment of donor cells and production of functional immune cells. No briquilimab treatment-related serious adverse events (“SAEs”) have been reported through December 31, 2023 in this clinical trial.

The FDA has granted rare pediatric disease designation to briquilimab as a conditioning treatment for patients with SCID. In addition, both the FDA and the European Medicines Agency (“EMA”) have granted orphan drug designation to briquilimab for conditioning treatment prior to hematopoietic stem cell transplantation.

Briquilimab in Other Stem Cell Transplant Regimens

Stem cell transplantation is among the most widely practiced forms of cellular therapy and has the potential to cure a wide variety of diseases, including cancers, genetic disorders and autoimmune diseases. A stem cell transplant procedure involves three main steps: (i) stem cells from the patient’s or donor’s bone marrow are collected; (ii) the patient’s bone marrow is cleared of any remaining stem cells in order to make space to receive new transplanted stem cells, which is known as conditioning; and (iii) the new stem cells are transplanted into the patient via infusion where they fasten to, or engraft in, the bone marrow and grow into the blood and immune cells that form the basis of reset and rebuilt blood and immune systems. Transplants are either allogeneic or autologous, depending on the source of the new stem cells for the transplant. In an allogeneic transplant, patients receive cells from a stem cell donor. In an autologous transplant, the patient’s own stem cells are used. Autologous transplants also include stem cell gene therapies, where cells are collected from the patient, edited to either enable a functioning gene or correct a defective gene, and then transplanted into the patient via infusion.

Currently, patients must receive highly toxic and potentially life-threatening conditioning agents to prepare their bone marrow for transplantation with either donor stem cells or their own gene-edited stem cells. Younger, fitter patients capable of surviving these toxic side effects are typically given myeloablative, or high-intensity, conditioning whereas older or less fit patients are typically given reduced intensity, but still toxic, conditioning which can lead to less effective transplants. These toxicities include a range of acute and chronic effects to the gastrointestinal tract, kidneys, liver, lung and endocrine and neurologic tissues. Depending upon the conditioning regimen, fitness of the patient, and compatibility between the donor and recipient, the risk of transplant-related mortality ranges from 10% to more than 50% in older patients. Less toxic ways to condition patients have been developed to enable transplant for older patients or those with major comorbidities, but these regimens risk less potent disease elimination and higher rates of disease relapse. Even though stem cell therapy can be one of the most powerful forms of disease cure, these limitations of non-targeted conditioning regimens have seen little innovation over the past decade. We believe that novel targeting approaches to stem cell conditioning have the potential to reduce toxicities associated with current regimens and expand the use of allogeneic and gene modified transplants in multiple diseases.

Briquilimab for Fanconi Anemia Patients Undergoing Stem Cell Transplantation

FA is a rare but serious blood disorder that prevents bone marrow from making sufficient new red blood cells. It can also cause the bone marrow to make abnormal blood cells. FA typically presents at birth or early in childhood between five and ten years of age. Ultimately, it can lead to serious complications, including bone marrow failure, severe aplastic anemia and cancers such as AML and MDS. Treatment may include blood transfusions or medicine to create more red blood cells, but HCT is the only cure. Briquilimab as a conditioning agent for FA patients undergoing stem cell transplantation is being evaluated in a clinical trial collaboration with Stanford. Stanford has reported data for the first five patients, showing 100% donor myeloid chimerism in the first four patients with available bone marrow chimerism data. Additional enrollment is ongoing.

Briquilimab for Sickle Cell Disease Patients Undergoing Stem Cell Transplantation

SCD is an inherited blood disorder that affects the hemoglobin protein in red blood cells that delivers oxygen to tissues and organs. Approximately 300,000 infants are born with SCD annually worldwide, and the number of cases is expected to significantly increase. Currently, HCT is the only cure available for SCD. Allogeneic transplants as well as new autologous gene-edited transplants both currently rely on myeloablative conditioning with either busulfan or melphalan. We believe briquilimab could be a significant advance for patients, replacing these current agents which are known to be genotoxic and associated with limited efficacy and serious adverse effects, including veno-occlusive disease, infertility and secondary malignancies. Briquilimab as a conditioning agent for SCD patients undergoing stem cell transplantation is currently being evaluated in a clinical trial collaboration with the National Heart, Lung, and Blood Institute (“NHLBI”). The NHLBI has reported data for the first three patients in this study, showing 100% donor myeloid chimerism at 30 days and increased levels of hemoglobin versus pre-transplant baseline. Additional enrollment is ongoing.  

Briquilimab for Chronic Granulomatous Disease Patients Undergoing Stem Cell Transplantation

CGD is a rare, inherited disease of the immune system that develops in infancy or early childhood and results in severe and sometimes life-threatening infections. Allogeneic hematopoietic stem cell transplant is a proven cure for CGD. However, its use is limited because of the associated serious adverse effects and limited efficacy of current conditioning agents used to deplete stem cells in preparation for transplantation. Briquilimab for CGD patients will be evaluated in a clinical trial in collaboration with the National Institute of Allergy and Infectious Diseases. Enrollment in this study is ongoing.

Briquilimab for GATA-2 MDS Patients Undergoing Stem Cell Transplantation

GATA-2 MDS is a type of MDS characterized by mutations in the GATA-2 gene resulting in complex phenotypes including increased risk of infection, deficiencies of immune cells such as B- and NK-cells and overall poor prognosis. Allogeneic stem cell transplant may be used to cure these patients; however, the use of current conditioning agents can be difficult due to the fragile health status of these patients. Briquilimab-based conditioning for GATA-2 MDS patients will be evaluated in a clinical trial in collaboration with the National Cancer Institute (“NCI”). Enrollment in this study is ongoing.

Briquilimab for Acute Myeloid Leukemia and Myelodysplastic Syndrome

We have completed an open label Phase 1 clinical trial to evaluate the safety and tolerability of briquilimab conditioning, in combination with low dose radiation (200-300 cGy) and fludarabine, in patients with AML or MDS undergoing blood stem cell transplantation. At clinical trial entry for the dose finding portion, all patients were transplant eligible but most still had evidence of measurable residual disease (MRD positive) as detected by cytogenetics, flow cytometry or next-generation sequencing. The primary endpoints are to evaluate the safety, tolerability and pharmacokinetic parameters of briquilimab. Secondary endpoints include depletion of host HSCs, donor engraftment, donor chimerism, MRD clearance, non-relapse mortality, event-free survival and overall survival.  

31 MDS/AML patients were enrolled. All patients demonstrated a reduction of neutrophil counts (“ANC”) below 500/uL following a single infusion of briquilimab (0.6 mg/kg) in combination with 200-300 cGy total body irradiation and three days of 30 mg /m2/day fludarabine. Neutrophils are the most common type of white blood cell and are the first cells to engraft. Following transplant, all patients showed successful donor engraftment as evidenced by a recovery of neutrophil counts exceeding 500/uL in 13-24 days.

No briquilimab-related SAEs have been reported in this trial, including no cases of oral mucositis, and no cases of veno-occlusive disease. Among the 31 patients enrolled, there have been four cases of grade 2 acute GvHD, one case of late onset grade 3 GvHD, four cases of mild chronic GvHD and four cases of moderate chronic GvHD. SAEs have been reported in twenty patients, including infections, cardiovascular events, disease progression or relapse and secondary graft failure, which is loss of a previously functioning graft. None were related to treatment as determined by the investigator.

While promising data has been generated to date in FA, SCD, CGD, GATA-2 MDS and AML/MDS, we do not currently plan to pursue additional clinical development in these indications without a partner. We will continue to work with the FDA, the transplant community and potential partners to explore development pathways and ensure briquilimab remains ready for continued development in these indications.

Our Strategy

Our goal is to develop and commercialize briquilimab as a safe and efficacious therapeutic to address the significant unmet medical need for patients suffering from mast cell driven diseases such as CSU and CIndU. As part of our strategy, we aim to:

Build a leading biotechnology company to enable cures via immune modulation. We are bringing together a team of biotech veterans, leading academic institutions and a strong syndicate of healthcare-focused investors to achieve our vision of developing and commercializing therapeutics with a focus on mast cell driven diseases.

Advance the development of briquilimab as a chronic therapeutic targeted primarily at mast cell driven diseases. We are focused on developing briquilimab as a repeat dose therapy for disorders of mast cells, including CSU, CIndU and additional mast cell driven indications currently under pre-clinical evaluation utilizing our proprietary Jasper Mouse.

Continue to evaluate briquilimab as a novel, targeted pre-transplant conditioning agent enabling more efficacious and safer HCT as well as a therapeutics in LR-MDS. We are continuing ongoing programs evaluating briquilimab in the field of HCT to address effective and safe pre-transplant conditioning in hematologic monogenic and malignant disorders. We are also continuing our ongoing clinical study of briquilimab as a treatment for patients with LR-MDS. 

Commercialize our product candidates to expand the use of effective and safe mast cell therapies for patients and physicians in our target markets. If approved, we plan to bring our product candidates to the American, European and Japanese markets, focusing on the top physicians and accredited transplant centers and hospital-based prescribers who administer the majority of mast cell therapies.

Form and strengthen strategic collaborations with leading industry and academic organizations to further develop our pipeline, unlock the commercial potential of our portfolio and provide enabling technologies for collaborators. We intend to continue collaborations with our existing partners and enter new strategic partnerships to develop additional candidates, generate evidence, and commercialize new products in the field of mast cell therapies.

Agreements with Amgen

In November 2019, we entered into a worldwide exclusive license agreement with Amgen for briquilimab (formerly AMG-191 and JSP191) in all indications and territories worldwide, which also includes translational science and materials from Stanford University. We were assigned and accepted Amgen’s rights and obligations, effective November 21, 2019, for the Investigator Sponsored Research Agreement (“ISRA”), entered into in June 2013, between Amgen and The Board of Trustees of the Leland Stanford Junior University (“Stanford”) and Quality Agreement between Amgen and Stanford, effective as of October 7, 2015. Under the ISRA, we received an option to negotiate a definitive license with Stanford for rights to certain Stanford intellectual property related to the study of briquilimab in exchange for an option exercise fee of $1.0 million, payable over a two-year period (the “Option”). We exercised the Option to Stanford docket S06-265 “Antibody-based clearance of endogenous stem cell niches prior to transplantation of bone marrow or HSCs (c-kit)” granted by Stanford under the ISRA on June 2, 2020. As a result, we have worldwide exclusive rights to develop and commercialize briquilimab in all indications, including stem cell transplants. The issued U.S. patents would be expected to expire in 2027, absent any applicable patent term extensions.

License Agreement with Stanford

In March 2021, we entered into an exclusive license agreement with respect to the use of briquilimab from the Stanford Office of Technology Licensing to license U.S. Patent Application Serial Number 60/856,435, filed Nov. 3, 2006, and U.S. Patent Application Serial Number 12/447,634 (publication number US 2010/0226927 Al) and know-how for the purpose of depleting endogenous blood stem cells in patients for whom hematopoietic cell transplantation is indicated. 

Intellectual Property

Our success depends in part on our ability to obtain and maintain proprietary protection for our product candidates and other discoveries, inventions, trade secrets and know-how that are critical to our business operations. It also depends in part on our ability to operate without infringing the proprietary rights of others, and in part, on our ability to prevent others from infringing our proprietary rights. We have a series of in-licensed patents outlined below with an additional pending patent application in the United States.

In-licensed Amgen Portfolio

We have exclusively licensed a patent family from Amgen applicable to our clinical development programs that contain patents and applications directed to humanized c-kit antibody. As of February 26, 2024, this patent portfolio includes three issued U.S. patents and one European patent, as well as granted patents in Australia, Canada, Japan, and Mexico, and pending patent applications in Europe and Hong Kong. The issued U.S. and European patents would be expected to expire in 2027, absent any applicable patent term extensions.

In-licensed Stanford Portfolio

We have an exclusive license in the field of use of briquilimab for the purpose of depleting endogenous blood stem cells in patients for whom hematopoietic cell transplantation is indicated to a patent family from Stanford University applicable to targeted conditioning that contains patents and applications directed to immunodepletion of endogenous stem cell niche prior to hematopoietic stem cell transplantation. As of February 26, 2024, this patent portfolio includes two issued U.S. patents and two European patents, as well as pending U.S., European, and Hong Kong patent applications. The issued U.S. and European patents would be expected to expire in 2027, absent any applicable patent term extensions.

Jasper Portfolio

As of February 26, 2024, we own nine patent families directed to compositions and/or methods for hematopoietic stem cell transplantation, one patent family directed to other methods of treating certain hematopoietic malignancies, three patent families directed to treating mast cell-driven disease, and one patent family directed to therapeutic efficacy testing models. These patent families include six pending U.S. provisional applications, two pending U.S. utility applications, eight PCT applications, and applications pending in Europe, and certain other jurisdictions. Any patents that grant from these applications would be expected to expire in 2042 to 2044, absent any applicable patent term extensions.

Additional Intellectual Property

We also rely on trade secrets, including know-how, confidential information, unpatented technologies and other proprietary information, to strengthen or enhance our competitive position, and prevent competitors from reverse engineering or copying our technologies. We maintain, as trade secrets, information relating our product candidates currently in development, as well as information related to our business strategy and business methods. However, trade secrets and confidential know-how are difficult to protect. To avoid inadvertent and improper disclosure of trade secrets, and to avoid the risks of former employees using these trade secrets to gain future employment, it is our policy to require employees, consultants and independent contractors to assign to us all rights to intellectual property they develop in connection with their employment with or services for us. We also protect our existing and developing intellectual property expressly through confidentiality provisions in agreements with third parties. There can be no assurance, however, that these agreements will be self-executing or otherwise provide meaningful protection for our trade secrets or other intellectual property or proprietary information, or adequate remedies in the event of unauthorized use or disclosure of such trade secrets or other intellectual property or proprietary information. We also seek to preserve the integrity and confidentiality of our trade secrets and other confidential information by maintaining physical security of our premises and physical and electronic security of our information technology systems. While we have confidence in the measures we take to protect and preserve our trade secrets, such measures can be breached, and we may not have adequate remedies for any such breach. In addition, our trade secrets may otherwise become known or be independently discovered by competitors.

We intend to pursue additional intellectual property protection to the extent we believe it would advance our business objectives, which may include objectives within and outside the United States. Despite our efforts to protect our intellectual property rights these rights may not be respected in the future or may be circumvented or challenged (and potentially invalidated) in a legal proceeding in any jurisdiction where we have intellectual property rights. In addition, the laws of various foreign countries may not afford the same protections or assurances to the same extent as the laws in the United States. See the section titled “Risk Factors — Risks Related to Our Intellectual Property” for additional information regarding these and other risks related to intellectual property.

Competition

The industry we operate is in highly competitive and dynamic, subject to rapid technological change. We have competition in the market for both our product candidates and may face competition from large pharmaceutical and biotechnology companies, smaller pharmaceutical and biotechnology companies, specialty pharmaceutical companies, generic drug companies, academic institutions, government agencies, research institutions and others. We believe that our intellectual property, proprietary scientific knowledge, development experience and partnerships will provide us with competitive advantages in the market we operate in.

We are aware of competing products and adjacent therapies, not limited to small molecules, biologics and cell therapies, that address the same domain of conditions we are targeting. The following list of competitors indicate companies that are directly competing with our product candidate.

Competitors for our briquilimab c-Kit targeted therapeutic program include the following:

Sales and Marketing

We do not currently have sales and marketing infrastructure to support commercial launch of our product candidates, if approved. We may build such capabilities in North America prior to potential launch of briquilimab. Outside of North America, we may rely on licensing, co-sale and co-promotion agreements with strategic partners for the commercialization of our product candidates. If we build a commercial infrastructure to support marketing in North America, such commercial infrastructure could be expected to include a targeted sales force supported by sales management, internal sales support, an internal marketing group and distribution support. To develop the appropriate commercial infrastructure internally, we would have to invest financial and management resources, some of which would have to be deployed prior to any confirmation that briquilimab will be approved.

Research and Development

We invest significantly in our research and development efforts, to discover and validate therapeutics while improving our processes and approach to drug making. We strive to progress candidates that can address unmet or underserved clinical needs and favor programs with well-validated targets and defined regulatory approval paths. Our R&D team has played key roles in discovering and developing a number of promising candidates over the past 20 plus years while at Jasper, and while at Alexion, Amgen, Arcus, AstraZeneca, Bayer, BeiGene, Bristol-Myers Squibb, Genentech, Gilead, Johnson & Johnson, Portola, and others. They have leveraged experience, insights and capabilities to optimize development, along with fostering collaboration with external partners to innovate and expand into potential additional indications. Our current development-stage portfolio consists of briquilimab in mast and stem cell diseases.

Manufacturing

We do not currently own or operate any manufacturing facility. We rely on contract manufacturing organizations to produce our drug candidates in accordance with cGMP regulations for use in our clinical studies. The manufacture of pharmaceuticals is subject to extensive cGMP regulations, which impose various procedural and documentation requirements and govern all areas of record keeping, production processes and controls, personnel and quality control. Under our license agreement with Amgen, we have received a substantial amount of drug product to support initiation of our planned clinical trials of briquilimab. In November 2019, we entered into development and manufacturing agreements with Lonza relating to the manufacturing of briquilimab and product quality testing. The facility of Lonza in Slough, United Kingdom is responsible for production and testing of drug substance. The facility of Lonza in Stein, Switzerland is responsible for production and testing of drug product. Labelling, packaging and storage of finished drug product is provided by PCI Pharma Services, in San Diego, California. Our agreement with Lonza includes certain limitations on our ability to enter into supply arrangements with any other supplier without Lonza’s consent. In addition, Lonza has the right to increase the prices it charges us for certain supplies depending on a number of factors, some of which are outside of our control.

Government Regulation

Government authorities in the United States, at the federal, state and local level, and in other countries and jurisdictions, including the European Union, extensively regulate, among other things, the research, development, testing, manufacture, pricing, reimbursement, sales, quality control, approval, packaging, storage, recordkeeping, labeling, advertising, promotion, distribution, marketing, post-approval monitoring and reporting, and import and export of pharmaceutical products, including biological products. The processes for obtaining marketing approvals in the United States and in foreign countries and jurisdictions, along with subsequent compliance with applicable statutes and regulations and other regulatory authorities, require the expenditure of substantial time and financial resources.

Licensure and Regulation of Biologics in the United States

In the United States, our product candidates are regulated as biological products, or biologics, under the Public Health Service Act (“PHSA”) and the Food, Drug, and Cosmetic Act (“FDCA”) and its implementing regulations and guidance. The failure to comply with the applicable U.S. requirements at any time during the product development process, including preclinical testing, clinical testing, the approval process, or post-approval process, may subject an applicant to delays in the conduct of the study, regulatory review, and approval, and/or administrative or judicial sanctions.

An applicant seeking approval to market and distribute a new biologic in the United States generally must satisfactorily complete each of the following steps:

Preclinical Studies and Investigational New Drug Application

Before testing any biologic product candidate in humans, the product candidate must undergo preclinical testing. Preclinical tests include laboratory evaluations of product chemistry, formulation and stability, as well as studies to evaluate the potential for efficacy and toxicity in animal studies. The conduct of the preclinical tests and formulation of the compounds for testing must comply with federal regulations and requirements. The results of the preclinical tests, together with manufacturing information and analytical data, are submitted to the FDA as part of an IND application.

An IND is an exemption from the FDCA that allows an unapproved product candidate to be shipped in interstate commerce for use in an investigational clinical trial and a request for FDA authorization to administer such investigational product to humans. The IND automatically becomes effective 30 days after receipt by the FDA, unless before that time the FDA raises concerns or questions about the product or conduct of the proposed clinical trial, including concerns that human research subjects will be exposed to unreasonable health risks. In that case, the IND sponsor and the FDA must resolve any outstanding FDA concerns before the clinical trials can begin or recommence.

As a result, submission of the IND may result in the FDA not allowing the trials to commence or allowing the trial to commence on the terms originally specified by the sponsor in the IND. If the FDA raises concerns or questions either during this initial 30-day period, or at any time during the IND review process, it may choose to impose a partial or complete clinical hold. Clinical holds are imposed by the FDA whenever there is concern for patient safety, may be a result of new data, findings, or developments in clinical, preclinical, and/or chemistry, manufacturing, and controls or where there is non-compliance with regulatory requirements. This order issued by the FDA would delay either a proposed clinical trial or cause suspension of an ongoing trial, until all outstanding concerns have been adequately addressed and the FDA has notified the company that investigations may proceed. This could cause significant delays or difficulties in completing our planned clinical trial or future clinical trials in a timely manner.

Human Clinical Trials in Support of a BLA

Clinical trials involve the administration of the investigational product candidate to healthy volunteers or patients with the disease or condition to be treated under the supervision of a qualified principal investigator in accordance with GCP requirements. Clinical trials are conducted under protocols detailing, among other things, the objectives of the trial, inclusion and exclusion criteria, the parameters to be used in monitoring safety, and the effectiveness criteria to be evaluated. A protocol for each clinical trial and any subsequent protocol amendments must be submitted to the FDA as part of the IND.

A sponsor who wishes to conduct a clinical trial outside the United States may, but need not, obtain FDA authorization to conduct the clinical trial under an IND. When a foreign clinical trial is conducted under an IND, all FDA IND requirements must be met unless waived. When a foreign clinical trial is not conducted under an IND, the sponsor must ensure that the trial complies with certain regulatory requirements of the FDA in order to use the trial as support for an IND or application for marketing approval. Specifically, the FDA requires that such trials be conducted in accordance with GCP, including review and approval by an independent ethics committee and informed consent from participants. The GCP requirements encompass both ethical and data integrity standards for clinical trials. The FDA’s regulations are intended to help ensure the protection of human subjects enrolled in non-IND foreign clinical trials, as well as the quality and integrity of the resulting data. They further help ensure that non-IND foreign trials are conducted in a manner comparable to that required for clinical trials in the United States.

Further, each clinical trial must be reviewed and approved by an IRB either centrally or individually at each institution at which the clinical trial will be conducted. The IRB will consider, among other things, clinical trial design, patient informed consent, ethical factors, the safety of human subjects, and the possible liability of the institution. An IRB must operate in compliance with FDA regulations. The FDA, IRB, or the clinical trial sponsor may suspend or discontinue a clinical trial at any time for various reasons, including a finding that the clinical trial is not being conducted in accordance with FDA requirements or that the participants are being exposed to an unacceptable health risk. Clinical testing also must satisfy extensive GCP rules and the requirements for informed consent.

Additionally, some clinical trials are overseen by an independent group of qualified experts organized by the clinical trial sponsor, known as a data safety monitoring board (“DSMB”) or Independent Data Safety Monitoring Committee (“IDMC”). This group may recommend continuation of the trial as planned, changes in trial conduct, or cessation of the trial at designated check points based on certain available data from the trial to which only the DSMB or IDMC has access.

Clinical trials typically are conducted in three sequential phases, but the phases may overlap or be combined. Additional studies may be required after approval.

In some cases, the FDA may approve a BLA for a product but require the sponsor to conduct additional clinical trials to further assess the product’s safety and effectiveness after licensure. Such post-approval trials are typically referred to as Phase 4 clinical trials. These studies are used to gain additional experience from the treatment of patients in the intended therapeutic indication and to document a clinical benefit in the case of biologics approved under accelerated approval regulations. If the FDA approves a product while a company has ongoing clinical trials that were not necessary for approval, a company may be able to use the data from these clinical trials to meet all or part of any Phase 4 clinical trial requirement or to request a change in the product labeling. The failure to exercise due diligence with regard to conducting Phase 4 clinical trials could result in withdrawal of approval for products.

Information about applicable clinical trials must be submitted within specific timeframes to the NIH for public dissemination on its ClinicalTrials.gov website.

Compliance with cGMP Requirements

Before approving a BLA, the FDA typically will inspect the facility or facilities where the product is manufactured. The FDA will not approve an application unless it determines that the manufacturing processes and facilities are in full compliance with cGMP requirements and adequate to assure consistent production of the product within required specifications. The PHSA emphasizes the importance of manufacturing control for products like biologics whose attributes cannot be precisely defined.

Manufacturers and others involved in the manufacture and distribution of products must also register their establishments with the FDA and certain state agencies. Both domestic and foreign manufacturing establishments must register and provide additional information to the FDA upon their initial participation in the manufacturing process. Any product manufactured by or imported from a facility that has not registered, whether foreign or domestic, is deemed misbranded under the FDCA. Establishments may be subject to periodic unannounced inspections by government authorities to ensure compliance with cGMPs and other laws. Inspections must follow a “risk-based schedule” that may result in certain establishments being inspected more frequently. Manufacturers may also have to provide, on request, electronic or physical records regarding their establishments. Delaying, denying, limiting, or refusing inspection by the FDA may lead to a product being deemed to be adulterated.

Review and Approval of a BLA

The results of product candidate development, preclinical testing, and clinical trials, including negative or ambiguous results as well as positive findings, are submitted to the FDA as part of a BLA requesting a license to market the product. The BLA must contain extensive manufacturing information and detailed information on the composition of the product and proposed labeling as well as payment of a user fee. Under federal law, the submission of most BLAs is subject to an application user fee. The sponsor of a licensed BLA is also subject to an annual program fee. Certain exceptions and waivers are available for some of these fees, such as an exception from the application fee for products with orphan designation and a waiver for certain small businesses.

The FDA has 60 days after submission of the application to conduct an initial review to determine whether it is sufficient to accept for filing based on the agency’s threshold determination that it is sufficiently complete to permit substantive review. Once the submission has been accepted for filing, the FDA begins an in-depth review of the application. Under the goals and policies agreed to by the FDA under the PDUFA, the FDA has ten months in which to complete its initial review of a standard application and respond to the applicant, and six months for a priority review of the application. The FDA does not always meet its PDUFA goal dates for standard and priority BLAs. The review process may often be significantly extended by FDA requests for additional information or clarification. The review process and the PDUFA goal date may be extended by three months if the FDA requests or if the applicant otherwise provides additional information or clarification regarding information already provided in the submission within the last three months before the PDUFA goal date.

Under the PHSA, the FDA may approve a BLA if it determines that the product is safe, pure, and potent, and the facility where the product will be manufactured meets standards designed to ensure that it continues to be safe, pure, and potent. On the basis of the FDA’s evaluation of the application and accompanying information, including the results of the inspection of the manufacturing facilities and any FDA audits of preclinical and clinical trial sites to assure compliance with GCPs, the FDA may issue an approval letter or a complete response letter. An approval letter authorizes commercial marketing of the product with specific prescribing information for specific indications. If the application is not approved, the FDA will issue a complete response letter, or CRL, which will contain the conditions that must be met in order to secure final approval of the application, and when possible will outline recommended actions the sponsor might take to obtain approval of the application. Sponsors that receive a CRL may submit to the FDA information that represents a complete response to the issues identified by the FDA.

The FDA may also refer the application to an advisory committee for review, evaluation, and recommendation as to whether the application should be approved. In particular, the FDA may refer applications for novel biologic products or biologic products that present difficult questions of safety or efficacy to an advisory committee. Typically, an advisory committee is a panel of independent experts, including clinicians and other scientific experts, that reviews, evaluates, and provides a recommendation as to whether the application should be approved and under what conditions. The FDA is not bound by the recommendations of an advisory committee, but it considers such recommendations carefully when making decisions.

If the FDA approves a new product, it may limit the approved indication(s) for use of the product. It may also require that contraindications, warnings, or precautions be included in the product labeling. In addition, the FDA may call for post-approval studies, including Phase 4 clinical trials, to further assess the product’s efficacy and/or safety after approval. The agency may also require testing and surveillance programs to monitor the product after commercialization, or impose other conditions, including distribution restrictions or other risk management mechanisms, including REMS, to help ensure that the benefits of the product outweigh the potential risks. REMS can include medication guides, communication plans for healthcare professionals, and elements to assure safe use.

Expedited Review Programs

The FDA is authorized to expedite the review of BLAs in several ways. Under the Fast Track program, the sponsor of a product candidate may request the FDA to designate the product for a specific indication as a Fast Track product concurrent with or after the filing of the IND. Candidate products are eligible for Fast Track designation if they are intended to treat a serious or life-threatening condition and demonstrate the potential to address unmet medical needs for the condition. Fast Track designation applies to the combination of the product candidate and the specific indication for which it is being studied. In addition to other benefits, such as the ability to have greater interactions with the FDA, the FDA may initiate review of sections of a Fast Track application before the application is complete, a process known as rolling review. 

Any product candidate submitted to the FDA for marketing, including under a Fast Track program, may be eligible for other types of FDA programs intended to expedite development and review, such as breakthrough therapy designation, priority review and accelerated approval.

None of these expedited programs change the standards for approval but they may help expedite the development or approval process of product candidates.

Post-Approval Regulation

If regulatory approval for marketing of a product or new indication for an existing product is obtained, the sponsor will be required to comply with all regular post-approval regulatory requirements as well as any post-approval requirements that the FDA have imposed as part of the approval process. The sponsor will be required to report certain adverse reactions and production problems to the FDA, provide updated safety and efficacy information and comply with requirements concerning advertising and promotional labeling requirements. Manufacturers and certain of their subcontractors are required to register their establishments with the FDA and certain state agencies and are subject to periodic unannounced inspections by the FDA and certain state agencies for compliance with ongoing regulatory requirements, including cGMP regulations, which impose certain procedural and documentation requirements upon manufacturers. Accordingly, the sponsor and its third-party manufacturers must continue to expend time, money, and effort in the areas of production and quality control to maintain compliance with cGMP regulations and other regulatory requirements.

A product may also be subject to official lot release, meaning that the manufacturer is required to perform certain tests on each lot of the product before it is released for distribution. If the product is subject to official lot release, the manufacturer must submit samples of each lot, together with a release protocol showing a summary of the history of manufacture of the lot and the results of all of the manufacturer’s tests performed on the lot, to the FDA. The FDA may in addition perform certain confirmatory tests on lots of some products before releasing the lots for distribution. Finally, the FDA will conduct laboratory research related to the safety, purity, potency, and effectiveness of pharmaceutical products.

Once an approval is granted, the FDA may withdraw the approval if compliance with regulatory requirements and standards is not maintained or if problems occur after the product reaches the market. Later discovery of previously unknown problems with a product, including adverse events of unanticipated severity or frequency, or with manufacturing processes, or failure to comply with regulatory requirements, may result in revisions to the approved labeling to add new safety information; imposition of post-market studies or clinical trials to assess new safety risks; or imposition of distribution or other restrictions under a REMS program. Other potential consequences include, among other things:

Pharmaceutical products may be promoted only for the approved indications and in accordance with the provisions of the approved label. Although healthcare providers may prescribe products for uses not described in the drug’s labeling, known as off-label uses, in their professional judgment, drug manufacturers are prohibited from soliciting, encouraging or promoting unapproved uses of a product. The FDA and other agencies actively enforce the laws and regulations prohibiting the promotion of off-label uses, and a company that is found to have improperly promoted off-label uses may be subject to significant liability.

The FDA strictly regulates the marketing, labeling, advertising, and promotion of prescription drug products placed on the market. This regulation includes, among other things, standards and regulations for direct-to-consumer advertising, communications regarding unapproved uses, industry-sponsored scientific and educational activities, and promotional activities involving the Internet and social media. Promotional claims about a drug’s safety or effectiveness are prohibited before the drug is approved. After approval, a drug product generally may not be promoted for uses that are not approved by the FDA, as reflected in the product’s prescribing information.

If a company is found to have promoted off-label uses, it may become subject to adverse public relations and administrative and judicial enforcement by the FDA, the Department of Justice or the Office of the Inspector General of the Department of Health and Human Services, as well as state authorities. This could subject a company to a range of penalties that could have a significant commercial impact, including civil and criminal fines and agreements that materially restrict the manner in which a company promotes or distributes drug products. The federal government has levied large civil and criminal fines against companies for alleged improper promotion and has also requested that companies enter into consent decrees or permanent injunctions under which specified promotional conduct is changed or curtailed. 

Regulation and Procedures Governing Approval of Medicinal Products in the European Union

In order to market any product outside of the United States, a company must also comply with numerous and varying regulatory requirements of other countries and jurisdictions regarding quality, safety, and efficacy, and governing, among other things, clinical trials, marketing authorization, commercial sales, and distribution of drug products. Whether or not it obtains FDA approval for a product, an applicant will need to obtain the necessary approvals by the comparable foreign regulatory authorities before it can commence clinical trials or marketing of the product in those countries or jurisdictions. Specifically, the process governing approval of medicinal products in the European Union generally follows the same lines as in the United States. It entails satisfactory completion of preclinical studies and adequate and well-controlled clinical trials to establish the safety and efficacy of the product for each proposed indication. It also requires the submission to the relevant competent authorities of a marketing authorization application (“MAA”) and granting of a marketing authorization by these authorities before the product can be marketed and sold in the European Union.

Clinical Trial Approval

Pursuant to Clinical Trials Directive 2001/20/EC and the Directive 2005/28/EC on GCP, a system for the approval of clinical trials in the European Union was implemented through national legislation of the member states. Under this system, an applicant must obtain approval from the competent national authority of a European Union member state in which the clinical trial is to be conducted, or in multiple member states if the clinical trial is to be conducted in a number of member states. Furthermore, the applicant may only start a clinical trial at a specific site after the competent ethics committee has issued a favorable opinion. The clinical trial application must be accompanied by an investigational medicinal product dossier with supporting information prescribed by Directive 2001/20/EC and Directive 2005/28/EC and corresponding national laws of the member states and further detailed in applicable guidance documents.

In April 2014, the European Union adopted a new Clinical Trials Regulation (EU) No 536/2014, which became effective on January 31, 2022. It overhauled the current system of approvals for clinical trials in the European Union. Specifically, the new legislation, which is directly applicable in all member states, is aimed at simplifying and streamlining the approval of clinical trials in the European Union. For instance, the new Clinical Trials Regulation provides for a streamlined application procedure via a single-entry point, the Clinical Trials Information System (“CTIS”), and strictly defined deadlines for the assessment of clinical trial applications.

The conduct of all clinical trials commenced in the European Union prior to January 31, 2022 will continue to be bound by the previously applicable provisions. However, if a clinical trial continues for more than three years after January 31, 2022, the Clinical Trials Regulation will at that time begin to apply to the clinical trial. As of January 31, 2023, all new trial authorizations must be applied for under the Clinical Trials Regulation and utilize CTIS.

Marketing Authorization

To obtain a marketing authorization for a product under the European Union regulatory system, an applicant must submit an MAA, either under a centralized procedure administered by the EMA or one of the procedures administered by competent authorities in European Union Member States (decentralized procedure, national procedure, or mutual recognition procedure). A marketing authorization may be granted only to an applicant established in the European Union. Regulation (EC) No 1901/2006 provides that prior to obtaining a marketing authorization in the European Union, an applicant must demonstrate compliance with all measures included in an EMA approved Pediatric Investigation Plan (“PIP”) covering all subsets of the pediatric population, unless the EMA has granted a product specific waiver, class waiver, or a deferral for one or more of the measures included in the PIP.

The centralized procedure provides for the grant of a single marketing authorization by the European Commission that is valid for all European Union member states. Pursuant to Regulation (EC) No. 726/2004, the centralized procedure is compulsory for specific products, including for medicines produced by certain biotechnological processes, products designated as orphan medicinal products, advanced therapy products and products with a new active substance indicated for the treatment of certain diseases, including products for the treatment of cancer. For products with a new active substance indicated for the treatment of other diseases and products that are highly innovative or for which a centralized process is in the interest of patients, the centralized procedure may be optional. Manufacturers must demonstrate the quality, safety, and efficacy of their products to the EMA, which provides an opinion regarding the MAA. The European Commission grants or refuses marketing authorization in light of the opinion delivered by the EMA.

Under the centralized procedure, the CHMP established at the EMA is responsible for conducting an initial assessment of a product. Under the centralized procedure in the European Union, the maximum timeframe for the evaluation of an MAA is 210 days, excluding clock stops when additional information or written or oral explanation is to be provided by the applicant in response to questions of the CHMP. Accelerated evaluation may be granted by the CHMP in exceptional cases, when a medicinal product is of major interest from the point of view of public health and, in particular, from the viewpoint of therapeutic innovation. If the CHMP accepts such a request, the time limit of 210 days will be reduced to 150 days, but it is possible that the CHMP may revert to the standard time limit for the centralized procedure if it determines that it is no longer appropriate to conduct an accelerated assessment.

Coverage, Pricing, and Reimbursement

Significant uncertainty exists as to the coverage and reimbursement status of any product candidates for which we may seek regulatory approval by the FDA or other government authorities. In the United States and markets in other countries, patients who are prescribed treatments for their conditions and providers performing the prescribed services generally rely on third-party payors to reimburse all or part of the associated healthcare costs. Patients are unlikely to use any product candidates we may develop unless coverage is provided and reimbursement is adequate to cover a significant portion of the cost of such product candidates. Even if any product candidates we may develop are approved, sales of such product candidates will depend, in part, on the extent to which third-party payors, including government health programs in the United States such as Medicare and Medicaid, commercial health insurers, and managed care organizations, provide coverage, and establish adequate reimbursement levels for, such product candidates. The process for determining whether a payor will provide coverage for a product may be separate from the process for setting the price or reimbursement rate that the payor will pay for the product once coverage is approved. Third-party payors are increasingly challenging the prices charged, examining the medical necessity, and reviewing the cost-effectiveness of medical products and services and imposing controls to manage costs. Third-party payors may limit coverage to specific products on an approved list, also known as a formulary, which might not include all of the approved products for a particular indication.

In order to secure coverage and reimbursement for any product that might be approved for sale, a company may need to conduct expensive pharmacoeconomic studies in order to demonstrate the medical necessity and cost-effectiveness of the product, in addition to the costs required to obtain FDA or other comparable marketing approvals. Nonetheless, product candidates may not be considered medically necessary or cost-effective. A decision by a third-party payor not to cover any product candidates we may develop could reduce physician utilization of such product candidates once approved and have a material adverse effect on our sales, results of operations and financial condition. Additionally, a payor’s decision to provide coverage for a product does not imply that an adequate reimbursement rate will be approved. Further, one payor’s determination to provide coverage for a product does not assure that other payors will also provide coverage and reimbursement for the product, and the level of coverage and reimbursement can differ significantly from payor to payor. Third-party reimbursement and coverage may not be available to enable us to maintain price levels sufficient to realize an appropriate return on our investment in product development. In addition, any companion diagnostic tests require coverage and reimbursement separate and apart from the coverage and reimbursement for their companion pharmaceutical or biological products. Similar challenges to obtaining coverage and reimbursement applicable to pharmaceutical or biological products will apply to any companion diagnostics.

The containment of healthcare costs also has become a priority of federal, state and foreign governments and the prices of pharmaceuticals have been a focus in this effort. Governments have shown significant interest in implementing cost-containment programs, including price controls, restrictions on reimbursement, and requirements for substitution of generic products. Adoption of price controls and cost-containment measures, and adoption of more restrictive policies in jurisdictions with existing controls and measures, could further limit a company’s revenue generated from the sale of any approved products. Coverage policies and third-party reimbursement rates may change at any time. Even if favorable coverage and reimbursement status is attained for one or more products for which a company or its collaborators receive marketing approval, less favorable coverage policies and reimbursement rates may be implemented in the future.

If we obtain approval in the future to market in the United States any product candidates we may develop, we may be required to provide discounts or rebates under government healthcare programs or to certain government and private purchasers in order to obtain coverage under federal healthcare programs such as Medicaid. Participation in such programs may require us to track and report certain drug prices. We may be subject to fines and other penalties if we fail to report such prices accurately.

Outside the United States, ensuring adequate coverage and payment for any product candidates we may develop will face challenges. Pricing of prescription pharmaceuticals is subject to governmental control in many countries. Pricing negotiations with governmental authorities can extend well beyond the receipt of regulatory marketing approval for a product and may require us to conduct a clinical trial that compares the cost-effectiveness of any product candidates we may develop to other available therapies. The conduct of such a clinical trial could be expensive and result in delays in our commercialization efforts.

In the European Union, pricing and reimbursement schemes vary widely from country to country. Some countries provide that products may be marketed only after a reimbursement price has been agreed. Some countries may require the completion of additional studies that compare the cost-effectiveness of a particular product candidate to currently available therapies (so called health technology assessments) in order to obtain reimbursement or pricing approval. For example, the European Union provides options for its member states to restrict the range of products for which their national health insurance systems provide reimbursement and to control the prices of medicinal products for human use. European Union member states may approve a specific price for a product, or they may instead adopt a system of direct or indirect controls on the profitability of the company placing the product on the market. Other member states allow companies to fix their own prices for products but monitor and control prescription volumes and issue guidance to physicians to limit prescriptions. Recently, many countries in the European Union have increased the amount of discounts required on pharmaceuticals and these efforts could continue as countries attempt to manage healthcare expenditures, especially in light of the severe fiscal and debt crises experienced by many countries in the European Union. The downward pressure on healthcare costs in general, particularly prescription products, has become intense. As a result, increasingly high barriers are being erected to the entry of new products. Political, economic, and regulatory developments may further complicate pricing negotiations, and pricing negotiations may continue after reimbursement has been obtained. Reference pricing used by various European Union member states, and parallel trade (arbitrage between low-priced and high-priced member states), can further reduce prices. There can be no assurance that any country that has price controls or reimbursement limitations for pharmaceutical products will allow favorable reimbursement and pricing arrangements for any of our products, if approved in those countries.

Healthcare Law and Regulation

Healthcare providers and third-party payors play a primary role in the recommendation and prescription of drug products that are granted marketing approval. Arrangements with providers, consultants, third-party payors, and customers are subject to broadly applicable fraud and abuse, anti-kickback, false claims laws, patient privacy laws and regulations and other healthcare laws and regulations that may constrain our business and/or financial arrangements. Restrictions under applicable federal and state healthcare laws and regulations, include the following:

Further, some state laws require pharmaceutical companies to comply with the pharmaceutical industry’s voluntary compliance guidelines and the relevant compliance guidance promulgated by the federal government in addition to requiring pharmaceutical manufacturers to report information related to payments to physicians and other healthcare providers or marketing expenditures. In addition, certain state and local laws require the registration of pharmaceutical sales representatives in the jurisdiction. State and foreign laws also govern the privacy and security of health information in some circumstances, many of which differ from each other in significant ways and often are not preempted by the federal Health Insurance Portability and Accountability Act of 1996 (“HIPAA”), thus complicating compliance efforts.

Employees and Human Capital

As of December 31, 2023, we employed 45 full-time employees. The 45 full-time employees were engaged in research and development, operations, finance, and business development. Seven employees held Ph.D. degrees and three held an M.D. degree. Our employees are not represented by labor unions or covered under any collective bargaining agreements. We consider our relationship with our employees to be good.

Our human capital resources objectives include, as applicable, identifying, recruiting, retaining, incentivizing and integrating our existing and additional employees. The principal purposes of our equity incentive plans are to attract, retain and motivate selected employees and directors through the granting of stock-based compensation awards.

Facilities

We lease approximately 13,400 square feet of space for our headquarters in Redwood City, California under an agreement that expires in August 2026. Thereafter, at our option, we may extend the term for an additional five years to August 2031. We believe that our existing facilities are adequate to meet our current needs, and that suitable additional alternative spaces will be available in the future on commercially reasonable terms.

Indemnification and Insurance

Our business exposes us to potential liability including, but not limited to, potential liability for (i) non-compliance with applicable laws and regulations, and (ii) employment-related claims. In certain circumstances, we may also be liable for the acts or omissions of others, such as suppliers of goods or services.

We attempt to manage our potential liability to third parties through contractual protection (such as indemnification and limitation of liability provisions) in our contracts and through insurance. The contractual indemnification provisions vary in scope and generally do not protect us against all potential liabilities. In addition, in the event that we seek to enforce such an indemnification provision, the indemnifying party may not have sufficient resources to fully satisfy its indemnification obligations or may otherwise not comply with its contractual obligations.

We currently maintain insurance coverage with limits we believe to be appropriate. The coverage provided by such insurance may not be adequate for all claims made, and such claims may be contested by applicable insurance carriers.

Organization

We were organized as a corporation under the laws of the State of Delaware on August 13, 2019 under the name “Amplitude Healthcare Acquisition Corporation”. On September 24, 2021, we consummated the previously announced Business Combination (pursuant to the Business Combination Agreement, dated May 5, 2021, by and among AMHC, Merger Sub and Old Jasper). Pursuant to the terms of the Business Combination Agreement, a Business Combination or Reverse Recapitalization for accounting purposes between AMHC and Old Jasper was effected through the merger of Merger Sub with and into Old Jasper with Old Jasper surviving as AMHC’s wholly-owned subsidiary. In connection with the Business Combination, AMHC changed its name from Amplitude Healthcare Acquisition Corporation to Jasper Therapeutics, Inc.

Website Access to SEC Filings

We file annual, quarterly and special reports, proxy statements and other information with the Securities and Exchange Commission (the “SEC”). The SEC maintains an Internet website at http://www.sec.gov that contains reports, proxy and information statements, and other information regarding issuers that file electronically with the SEC, including Jasper. We maintain an Internet website at www.jaspertherapeutics.com. The information contained on our website or that can be accessed through our website does not constitute a part of this report. We make available, free of charge through our Internet website, our Annual Reports on Form 10-K, Quarterly Reports on Form 10-Q, Current Reports on Form 8-K and amendments to those reports filed or furnished pursuant to Section 13(a) or 15(d) of the Exchange Act, as soon as reasonably practicable after we electronically file or furnish this information to the SEC.

ITEM 1A. RISK FACTORS

Investing in our common stock involves a high degree of risk. Before making an investment decision, you should carefully consider the risks described below before deciding whether to invest in our common stock. Before you make a decision to buy our securities, in addition to the risks and uncertainties discussed above under “Cautionary Note Regarding Forward-Looking Statements”, you should carefully consider the specific risks set forth herein. If any of these risks actually occur, it may materially harm our business, financial condition, liquidity and results of operations. As a result, the market price of our securities could decline, and you could lose all or part of your investment. Additionally, the risks and uncertainties described below are not the only risks and uncertainties that we face. Additional risks and uncertainties not presently known to us or that we currently believe to be immaterial may become material and adversely affect our business.

Risk Factor Summary

Below is a summary of the principal factors that make an investment in our common stock speculative or risky. This summary does not address all of the risks that we face. Additional discussion of the risks summarized in this risk factor summary, and other risks that we face, can be found below and should be carefully considered, together with other information in this Annual Report on Form 10-K and our other filings with the SEC before making an investment decision regarding our common stock.

Risks Related to Our Financial Position and Need for Additional Capital

We have incurred significant net losses and negative operating cash flows since our inception. We expect to incur net losses for the foreseeable future and may never achieve or maintain profitability.

We are a clinical-stage biotechnology company dedicated to enabling cures through therapeutics targeting mast and hematopoietic stem cells and have a limited operating history. Investment in biopharmaceutical product development is highly speculative because it entails substantial upfront capital expenditures and significant risk that any potential product candidate will fail to demonstrate adequate effect or an acceptable safety profile, gain regulatory approval and become commercially viable. We have no products approved for commercial sale and have not generated any revenue from product sales to date, and we continue to incur significant research and development and other expenses related to our ongoing operations. As a result, we are not profitable and have incurred losses and negative operating cash flows in each period since our inception. For the years ended December 31, 2023 and 2022, we reported net losses of $64.5 million and $37.7 million, respectively. For the years ended December 31, 2023 and 2022, we reported negative operating cash flows of $52.1 million and $45.9 million, respectively. As of December 31, 2023, we had an accumulated deficit of $169.6 million. We have devoted all of our efforts to organizing and staffing our company, business and scientific planning, raising capital, acquiring and developing technology, identifying potential product candidates, undertaking research and preclinical studies of potential product candidates, developing manufacturing capabilities and evaluating a clinical path for our pipeline programs. We expect to continue to incur significant expenses and increasing operating losses for the foreseeable future, and we expect these losses to increase as we continue our research and development of, and seek regulatory approvals for, our product candidates.

The net losses we incur may fluctuate significantly from quarter to quarter. We anticipate that our expenses will increase substantially if and as we:

As a company, we have not completed clinical development of any product candidate and expect that it will be several years, if ever, before we have a product candidate ready for commercialization. To become and remain profitable, we must develop and, either directly or through collaborators, eventually commercialize a product or products with significant market potential. This will require us to be successful in a range of challenging activities, including identifying product candidates, completing preclinical testing and clinical trials of product candidates, obtaining marketing approval for these product candidates, manufacturing, marketing and selling those products for which we may obtain marketing approval and satisfying any post-marketing requirements.

We may never succeed in these activities and, even if we do, may never generate revenues that are significant or large enough to achieve profitability. Our product candidates and research programs are currently only in the early stages of development. Because of the numerous risks and uncertainties associated with developing product candidates, we are unable to predict the extent of any future losses or when we will become profitable, if at all. If we do achieve profitability, we may not be able to sustain or increase profitability on a quarterly or annual basis. Our failure to become and remain profitable would decrease the value of our company and could impair our ability to raise capital, maintain our research and development efforts, expand our business or continue our operations. A decline in the value of our company could also cause you to lose all or part of your investment.

We will need substantial additional funding, which may not be available on acceptable terms, or at all. If we are unable to raise capital when needed, we would be forced to delay, reduce or eliminate our research and product development programs or future commercialization efforts.

We expect to spend substantial amounts of cash to conduct further research and development and preclinical testing and clinical trials of our product candidates, to seek regulatory approvals for our product candidates and to launch and commercialize any product candidates for which we receive regulatory approval. Furthermore, we expect to incur additional costs associated with operating as a public company. Accordingly, we will need to obtain substantial additional funding in order to maintain our continuing operations. If we are unable to raise capital when needed or on attractive terms, we would be forced to delay, reduce or eliminate our research and product development programs or future commercialization efforts. As of December 31, 2023, our cash and cash equivalents were $86.9 million and we had an accumulated deficit of $169.6 million. Although we raised total estimated net proceeds of $47.2 million in February 2024 in connection with the issuance and sale of 3,900,000 shares of our common stock in an underwritten offering, we will need to raise additional financing to continue our products’ development for the foreseeable future, and will continue to need to do so until we become profitable. Our future financing requirements will depend on many factors, including:

Conducting preclinical testing and clinical trials is a time-consuming, expensive and uncertain process that takes years to complete, and we may never generate the necessary data or results required to obtain marketing approval and achieve product sales. In addition, even if we successfully develop product candidates and those are approved, we may not achieve commercial success. Our commercial revenues, if any, will be derived from sales of products that we do not expect to be commercially available for several years, if at all. Accordingly, we will need to continue to rely on additional financing to achieve our business objectives.

We currently have an effective universal shelf registration statement on Form S-3, which we filed with the SEC on April 28, 2023, and which was declared effective on May 5, 2023 and will expire on May 5, 2026 (the “Shelf Registration Statement”). Pursuant to the Shelf Registration Statement, we may offer from time to time up to an aggregate of $250.0 million of securities, including any combination of common stock, preferred stock, debt securities, warrants, rights, units and depositary shares. On November 10, 2022, we entered into a Controlled Equity Offering^SM Sales Agreement with Cantor Fitzgerald & Co. (the “Agent”), pursuant to which we may offer and sell through or to the Agent, as sales agent or principal, shares of common stock from time to time (the “ATM Offering”). On May 5, 2023, we filed with the SEC under the Shelf Registration Statement a prospectus with the SEC in connection with the ATM Offering (the “ATM Prospectus”), pursuant to which we may offer pursuant to the ATM Offering shares of our common stock having an aggregate offering price of up to $75.0 million. No securities were sold pursuant to the Shelf Registration Statement and the ATM Prospectus as of December 31, 2023. In February 2024, we issued and sold 3,900,000 shares of our common stock in an underwritten offering pursuant to the Shelf Registration Statement for an estimated net proceeds of $47.2 million pursuant an underwriting agreement with Cowen and Company, LLC and Evercore Group L.L.C., as the representatives of the several underwriters named therein.

As of February 26, 2024, $75.0 million remains allocated and available under the ATM Prospectus and approximately $124.5 million remains available and unallocated under the Shelf Registration Statement.

If we raise additional capital by issuing equity securities, the percentage ownership of our existing stockholders may be reduced, and accordingly these stockholders may experience substantial dilution. We may also issue equity securities that provide for rights, preferences and privileges senior to those of our common stock. Given our need for cash and that equity issuances are the most common type of fundraising for similarly situated companies, the risk of dilution is particularly significant for our stockholders.

Any additional fundraising efforts may divert our management from our day-to-day activities, which may adversely affect our ability to develop and commercialize product candidates. We cannot be certain that additional funding will be available on acceptable terms, or at all. We have no committed source of additional capital and, if we are unable to raise additional capital in sufficient amounts or on terms acceptable to us, we may have to significantly delay, scale back or discontinue the development or commercialization of product candidates or other research and development initiatives. Our license agreements and any future collaboration agreements may also be terminated if we are unable to meet the payment or other obligations under the agreements. We could be required to seek collaborators for product candidates at an earlier stage than otherwise would be desirable or on terms that are less favorable than might otherwise be available or relinquish or license on unfavorable terms our rights to product candidates in markets where we otherwise would seek to pursue development or commercialization ourselves.

Our management believes that our existing cash and cash equivalents as of December 31, 2023 together with the cash proceeds received upon the closing of the underwritten offering in February 2024, will be sufficient to fund our operating plan for at least twelve months from the date of filing of this Annual Report on Form 10-K.  However, we will need to raise additional financing to continue our products’ development for the foreseeable future, and will continue to need to do so until we become profitable. If we are unable to obtain funding when and as needed on a timely basis, we may be required to significantly curtail, delay or discontinue one or more of our research or development programs or the commercialization of any product candidate, or be unable to expand our operations or otherwise capitalize on our business opportunities, as desired, which could materially affect our business, financial condition and results of operations. Any of the above events could significantly harm our business, prospects, financial condition and results of operations and cause the price of our common stock to decline.

We have a limited operating history and no history of commercializing pharmaceutical products, which may make it difficult to evaluate the prospects for our future viability.

We are a clinical stage company. We were founded and commenced operations in March 2018. Our operations to date have been limited to organizing and staffing our company, business planning, raising capital, acquiring and developing our technology, identifying potential product candidates and undertaking preclinical studies and clinical trials. Although we have initiated clinical trials for briquilimab, we have not yet demonstrated an ability to successfully complete clinical trials of our product candidates; obtained marketing approvals; manufactured a commercial-scale medicine or therapy, or arranged for a third party to do so on our behalf; or conducted sales and marketing activities necessary for successful commercialization. Typically, it takes about 10 to 15 years to develop a new medicine from the time it is discovered to when it is available for treating patients. Consequently, any predictions we make about our future success or viability may not be as accurate as they could be if we had a longer operating history.

In addition, as a young business, we may encounter unforeseen expenses, difficulties, complications, delays and other known and unknown factors. We will need to transition at some point from a company with a research and development focus to a company capable of supporting commercial activities. We may not be successful in such a transition.

We have never generated revenue from product sales and may never be profitable.

Our ability to generate revenue from product sales and achieve profitability depends on our ability, alone or with collaborators, to successfully complete the development of, and obtain the regulatory approvals necessary to commercialize, product candidates. We do not anticipate generating revenues from product sales for the next several years, if ever. Our ability to generate future revenue from product sales depends heavily on our, or our future collaborators’, ability to successfully:

Even if one or more of the product candidates we develop are approved for commercial sale, we anticipate incurring significant costs associated with commercializing any approved product candidate. Our expenses could increase beyond expectations if we are required by the FDA, the EMA or other regulatory authorities to perform clinical and other studies in addition to those that we currently anticipate.

Many of the factors listed above are beyond our control, and could cause us to experience significant delays or prevent us from completing the development of our product candidates, obtaining regulatory approvals or commercializing our product candidates. Even if we do achieve profitability, we may not be able to sustain or increase profitability on a quarterly or annual basis. A failure to become or remain profitable could result in a decline in the value of our company and could also cause you to lose all or part of your investment.

As a result of our history of losses and negative cash flows from operations, we will need to raise additional financing to continue our products’ development.

Our history of operating losses and negative cash flows from operations combined with our anticipated use of cash to fund operations raised substantial doubt about our ability to continue as a going concern beyond the 12-month period reported by us and our auditors in prior periods. While management believes that our existing cash and cash equivalents as of December 31, 2023 , together with the cash proceeds received upon the closing of the underwritten offering in February 2024, will be sufficient to fund our operating plan for at least twelve months from the issuance date of our consolidated financial statements included in Part II, Item 8 of this Annual Report on Form 10-K, we will need to raise additional financing to continue our products’ development for the foreseeable future, and will continue to need to do so until we become profitable. Our future viability as an ongoing business is dependent on our ability to generate cash from our operating activities or to raise additional capital to finance our operations.

The perception that we might be unable to continue as a going concern may also make it more difficult to obtain financing for the continuation of our operations on terms that are favorable to us, or at all, and could result in the loss of confidence by investors and employees. Our consolidated financial statements do not include any adjustments that might result from the outcome of this uncertainty. If we are unable to continue as a going concern, we may have to liquidate our assets and may receive less than the value at which those assets are carried on our consolidated financial statements, and it is likely that our investors will lose all or a part of their investment.

Our ability to utilize our net operating loss carryforwards and certain other tax attributes to offset taxable income or taxes may be limited.

As of December 31, 2023, we had net operating loss carryforwards for federal income tax purposes of $91.3 million that can be carried forward indefinitely. As of December 31, 2023, we had net operating loss carryforwards for state income tax purposes of $131.9 million that begin to expire in 2038. Portions of these net operating loss carryforwards could expire unused and be unavailable to offset future income tax liabilities. Under the legislation enacted in 2017, informally titled the Tax Cuts and Jobs Act (the “Tax Act”), as modified by the Coronavirus Aid, Relief, and Economic Security Act (the “CARES Act”), U.S. federal net operating losses incurred in taxable years beginning after December 31, 2017 may be carried forward indefinitely, but the deductibility of such federal net operating losses in taxable years beginning after December 31, 2020 is limited. It is uncertain how various states will respond to the Tax Act and the CARES Act. For state income tax purposes, there may be periods during which the use of net operating loss carryforwards is suspended or otherwise limited, which could accelerate or permanently increase state taxes owed. In addition, under Sections 382 and 383 of the Internal Revenue Code of 1986, as amended (the “Code”), and corresponding provisions of state law, if a corporation undergoes an “ownership change,” which is generally defined as a greater than 50% change, by value, in its equity ownership over a three-year period, the corporation’s ability to use its pre-change net operating loss carryforwards and other pre-change tax attributes to offset its post-change income or taxes may be limited. Our existing net operating loss carryforwards may be subject to limitations arising out of previous ownership changes and we may be limited as to the amount that can be utilized each year as a result of such previous ownership changes, including the Business Combination and related transactions. In addition, future changes in our stock ownership, including future offerings, as well as other changes that may be outside of our control, could result in additional ownership changes. We have completed a Section 382 analysis covering taxable periods from its inception through the year ended December 31, 2021. We experienced an ownership change on November 21, 2019 for both federal and California tax purposes related to its Series A redeemable convertible preferred stock financing. Any net operating loss generated for taxable periods in 2018 and through November 21, 2019 in excess of $2.87 million will be permanently limited for California tax purposes. We reduced our California net operating loss deferred tax assets balance by the permanently limited amount of $0.6 million. There would be no permanent loss of federal net operating loss based on the limits. We experienced an additional ownership change on September 24, 2021; however, we do not expect there are additional tax attributes that will expire unused before the expiration periods. There is a full valuation allowance for net deferred tax assets, including net operating loss carryforwards for the year ended December 31, 2023.

Business disruptions caused by natural or man-made disasters, acts of war or other hostilities could seriously harm our future revenues and financial condition and increase our costs and expenses generally.

Our corporate headquarters are located in the San Francisco Bay Area, a region known for seismic activity. Our suppliers may also experience a disruption in their business as a result of natural or man-made disasters. A significant natural or man-made disaster, such as an earthquake, prolonged or repeated power outage, hurricane, flood, fire, drought or other extreme weather events and changing weather patterns, which are increasing in frequency due to the impacts of climate change, could severely damage or destroy our headquarters or facilities or the facilities of our manufacturers or suppliers, which could have a material and adverse effect on our business, financial condition and results of operations. In addition, terrorist acts, acts of war or the outbreak of hostilities against the U.S. or other countries globally, could cause damage or disruption to us, our employees, facilities, partners and suppliers, which could have a material adverse effect on our business, financial condition and results of operations.

Recent and future changes to tax laws could materially adversely affect our company.

The tax regimes we are subject to or operate under, including with respect to income and non-income taxes, are unsettled and may be subject to significant change. Changes in tax laws, regulations, or rulings, or changes in interpretations of existing laws and regulations, could materially adversely affect our company. For example, the Tax Cuts and JOBS Act, the Coronavirus Aid, Relief, and Economic Security Act, and the Inflation Reduction Act, or the IRA, enacted many significant changes to the U.S. tax laws. Future guidance from the Internal Revenue Service and other tax authorities with respect to such legislation may affect us, and certain aspects thereof could be repealed or modified in future legislation. For example, the IRA includes provisions that will impact the U.S. federal income taxation of certain corporations, including imposing a 15% minimum tax on the book income of certain large corporations and a 1% excise tax on certain corporate stock repurchases that would be imposed on the corporation repurchasing such stock. In addition, many countries in Europe, as well as a number of other countries and organizations (including the Organization for Economic Cooperation and Development and the European Commission), have proposed, recommended, or (in the case of countries) enacted or otherwise become subject to changes to existing tax laws or new tax laws that could significantly increase our tax obligations in the countries where we do business or require us to change the manner in which we operate our business.

Risks Related to Discovery, Development, Manufacturing and Commercialization

We are substantially dependent on the success of our most advanced product candidate, briquilimab. If we are unable to complete development of, obtain approval for and commercialize our product candidates, including briquilimab, in a timely manner or at all, our business will be harmed.

Our future success is dependent on our ability to timely advance and complete clinical trials, obtain marketing approval for and successfully commercialize our product candidates. We are not permitted to market or promote briquilimab or any other product candidate before we receive marketing approval from the FDA and comparable foreign regulatory authorities, and we may never receive such marketing approvals.

The success of our product candidates will depend on several factors, including the following: 

We do not have complete control over many of these factors, including certain aspects of clinical development and the regulatory submission process, potential threats to our intellectual property rights and the manufacturing, marketing, distribution and sales efforts of any future collaborator. If we are not successful with respect to one or more of these factors in a timely manner or at all, we could experience significant delays or an inability to successfully commercialize briquilimab, which would materially harm our business. If we do not receive marketing approvals for briquilimab, we may not be able to continue our operations.

We may not be successful in our efforts to identify, develop and commercialize additional product candidates. If these efforts are unsuccessful, we may never become a commercial stage company or generate any revenues.

The success of our business depends primarily upon our ability to identify, develop, and commercialize additional product candidates based on, or complementary with, our technology platform. We are currently enrolling patients in Phase 1b/2a trial evaluating briquilimab in patients with CSU, a Phase 1 trial evaluating briquilimab as a second-line therapy in subjects with LR-MDS, and a Phase 1/2 clinical trial of briquilimab as a conditioning agent prior to allogenic transplant for SCID patients. We are also in the process of initiating a study of briquilimab in patients with CIndU as well as other product development programs that are still in the research or preclinical stage of development. Our research programs may fail to identify additional indications for clinical development or product candidates for clinical development for a number of reasons. Our research methodology may be unsuccessful in identifying potential product candidates, our potential product candidates may be shown to have harmful side effects in preclinical in vitro experiments or animal model studies, they may not show promising signals of efficacy in such experiments or studies or they may have other characteristics that may make the product candidates impractical to manufacture, unmarketable or unlikely to receive marketing approval. The historical failure rate for product candidates is high due to risks relating to safety, efficacy, clinical execution, changing standards of medical care, and other unpredictable variables. In addition, although we believe our technology platform will position us to rapidly expand our portfolio of product candidates beyond our current product candidates, our ability to expand our portfolio may never materialize.

If any of these events occur, we may be forced to abandon our research or development efforts for a program or programs, which would have a material adverse effect on our business, financial condition, results of operations and prospects. Research programs to identify new product candidates require substantial technical, financial and human resources. We may focus our efforts and resources on potential programs or product candidates that ultimately prove to be unsuccessful, which would be costly and time-consuming.

We may expend our limited resources to pursue a particular product candidate or indication and fail to capitalize on product candidates or indications that may be more profitable or for which there is a greater likelihood of success.

Because we have limited financial and managerial resources, we focus on research programs and product candidates that we identify for specific indications among many potential options. As a result, we may forego or delay pursuit of opportunities with other product candidates or for other indications that later prove to have greater commercial potential. For example, on January 10, 2023, we announced, as part of an overall portfolio prioritization, that we will focus on the development of our lead product candidate, briquilimab (formerly known as JSP191), in chronic mast and stem cell diseases as well as a conditioning agent for stem cell transplant in rare diseases. This portfolio includes a new program as a therapeutic for patients with CSU, along with our existing programs for briquilimab as a therapeutic for patients with LR-MDS and as a conditioning agent for stem cell transplant in patients with sickle cell disease, Fanconi anemia or severe combined immunodeficiency. Our resource allocation decisions may cause us to fail to capitalize on viable commercial medicines or profitable market opportunities. Our projections of both the number of people who have these diseases, as well as the subset of people with these diseases who have the potential to benefit from treatment with our product candidates, are based on estimates. If any of our estimates are inaccurate, the market opportunities for any of our product candidates could be significantly diminished and have an adverse material impact on our business. Additionally, the potentially addressable patient population for our product candidates may be limited, or may not be amenable to treatment with our product candidates. Our spending on current and future research and development programs and product candidates for specific indications may not yield any commercially viable product candidates. If we do not accurately evaluate the commercial potential or target market for a particular product candidate (including briquilimab), we may relinquish valuable rights to that product candidate through collaboration, licensing, or other royalty arrangements in cases in which it would have been more advantageous for us to retain sole development and commercialization rights to such product candidate. Any such event could have a material adverse effect on our business, financial condition, results of operations and prospects.

If any of our product candidates cause serious adverse events, undesirable side effects or unexpected characteristics, such events, side effects or characteristics could delay or prevent regulatory approval of the product candidate, limit our commercial potential or result in significant negative consequences following any potential marketing approval.

Undesirable side effects or adverse events caused by briquilimab or other therapeutics we may develop could cause us or regulatory authorities to interrupt, delay or halt clinical trials and could result in a more restrictive label or the delay or denial of regulatory approval by the FDA or comparable foreign regulatory authorities. Results of our clinical trials could reveal a high and unacceptable severity and prevalence of side effects or unexpected characteristics. Treatment-related side effects could also affect patient recruitment or the ability of enrolled patients to complete the trials or result in potential product liability claims.

If any product candidates we develop are associated with serious adverse events, undesirable side effects or unexpected characteristics, we may need to abandon their development or limit development to certain uses or subpopulations in which the serious adverse events, undesirable side effects or other characteristics are less prevalent, less severe or more acceptable from a risk-benefit perspective, any of which would have a material adverse effect on our business, financial condition, results of operations, and prospects. Many product candidates that initially showed promise in early stage testing have later been found to cause side effects that prevented further clinical development of the product candidates.

Results of preclinical studies and early clinical trials may not be predictive of results of future clinical trials, and such results do not guarantee approval of a product candidate by regulatory authorities. In addition, our clinical trials to date have been limited in scope, and results received to date may not be replicated in expanded or additional future clinical trials.

The outcome of preclinical studies and early clinical trials may not be predictive of the success of later clinical trials, and interim results of clinical trials do not necessarily predict success in the results of completed clinical trials. There can be no assurance that any of our current or future preclinical and clinical trials will ultimately be successful or support further preclinical or clinical development of any of our product candidates. Many companies in the pharmaceutical and biotechnology industries have suffered significant setbacks in late-stage clinical trials after achieving positive results in earlier development, and we could face similar setbacks. The design of a clinical trial can determine whether its results will support approval of a product, and flaws in the design of a clinical trial may not become apparent until the clinical trial is well advanced. Many companies that believed their product candidates performed satisfactorily in preclinical studies and clinical trials have nonetheless failed to obtain regulatory approval for their product candidates. In addition, preclinical and clinical data are often susceptible to varying interpretations and analyses, which may delay, limit or prevent regulatory approval. In addition, regulatory delays or rejections may be encountered as a result of many factors, including changes in regulatory policy during the period of product development. Any such adverse events may cause us to delay, limit or terminate planned clinical trials, any of which would have a material adverse effect on our business, financial condition, results of operations and prospects.

In some instances, there can be significant variability in safety or efficacy results between different clinical trials of the same product candidate due to numerous factors, including changes in trial procedures set forth in protocols, differences in the size and type of the patient populations, changes in and adherence to the dosing regimen and other clinical trial procedures and the rate of dropout among clinical trial participants. If we fail to receive positive results in clinical trials of our product candidates, the development timeline and regulatory approval and commercialization prospects for our most advanced product candidate, and, correspondingly, our business and financial prospects would be negatively impacted.

If we experience delays or difficulties in the enrollment of patients in clinical trials, the cost of developing product candidates could increase and our receipt of necessary regulatory approvals could be delayed or prevented.

Patient enrollment is a significant factor in the timing of clinical trials. The timing of our clinical trials depends, in part, on the speed at which we can recruit patients to participate in our trials. We or our collaborators may not be able to continue clinical trials for briquilimab or any other product candidates we identify or develop if we are unable to locate and enroll a sufficient number of eligible patients to participate in these trials as required by the FDA, the EMA or other analogous regulatory authorities outside the United States, or as needed to provide appropriate statistical power for a given trial. Patients may be unwilling to participate in our clinical trials because of negative publicity from adverse events related to the biotechnology competitive clinical trials for similar patient populations, clinical trials in competing products or for other reasons. As a result, the timeline for recruiting patients, conducting trials and obtaining regulatory approval of product candidates may be delayed.

Patient enrollment is also affected by other factors, including:

In addition, our clinical trials will compete with other clinical trials for product candidates that are in the same therapeutic areas as our product candidates, and this competition will reduce the number and types of patients available to us because some patients who have opted to enroll in our trials may instead opt to enroll in a trial being conducted by a competitor. We may conduct some of our clinical trials at the same clinical trial sites that some of our competitors use, which will reduce the number of patients who are available for our clinical trials at such clinical trial sites.

Enrollment delays in our clinical trials may result in increased development costs for briquilimab or any other product candidates we may develop, which would cause the value of our company to decline and limit our ability to obtain additional financing. If we or our collaborators have difficulty enrolling a sufficient number of patients to conduct our clinical trials as planned, we may need to delay, limit or terminate ongoing or planned clinical trials, any of which would have an adverse effect on our business, financial condition, results of operations and prospects.

We have never obtained regulatory approval for a drug, may never receive regulatory approval for any of our product candidates, and may therefore never generate revenues from product sales.

As a company, we have never obtained regulatory approval for, or commercialized, a drug. It is possible that the FDA may refuse to accept any or all future product candidates for substantive review or may conclude after review of our data that our application is insufficient to obtain regulatory approval for any current or future product candidates. If the FDA does not approve any future product candidates, it may require that we conduct additional costly clinical, preclinical or manufacturing validation studies before the FDA will reconsider one or more of our applications. Depending on the extent of these or any other FDA-required studies, approval of any product candidates or other application that we submit may be significantly delayed, possibly for several years, or may require us to expend more resources than we have available. Any failure or delay in obtaining regulatory approvals would prevent us from commercializing briquilimab or any other product candidate, generating revenues and achieving and obtaining or sustaining profitability. It is also possible that additional studies, if performed and completed, may not be considered sufficient by the FDA to approve any new drug application or other application we submit. If any of these outcomes occur, we may be forced to abandon the development of our product candidates, which would materially adversely affect our business and could potentially cause us to cease operations. We face similar risks for our applications in foreign jurisdictions.

Our commercial success depends upon attaining significant market acceptance of our product candidates, if approved, among physicians, patients, healthcare payers and operators of major clinics, and we may not be successful in attaining such market acceptance.

Even with the requisite approvals from the FDA in the U.S., the EMA in the European Union and other regulatory authorities internationally, the commercial success of our product candidates will depend, in part, upon the degree of market acceptance by physicians, patients, third-party payors and others in the medical community. Any product that we commercialize may not gain acceptance by physicians, patients, health care payors and others in the medical community. If these products do not achieve an adequate level of acceptance, we may not generate significant product revenue and may not become profitable. Efforts to educate the medical community and third-party payors on the benefits of our product candidates may require significant resources, including our management’s time and financial resources, and may not be successful. Even if any product candidate we develop receives marketing approval, it may nonetheless fail to gain sufficient market acceptance by physicians, patients, healthcare payors and others in the medical community. The degree of market acceptance of any product candidate we develop, if approved for commercial sale, will depend on a number of factors, including:

Even if a product candidate is approved, such product may not achieve an adequate level of acceptance, we may not generate significant product revenues, and we may not become profitable.

If we are unable to establish effective marketing and sales capabilities or enter into agreements with third parties to market and sell our product candidates, if approved, we may not be able to effectively market and sell our product candidates, if approved, or generate product revenues.

We have limited marketing capabilities and limited experience in the sale, marketing or distribution of pharmaceutical products. In addition, we do not have a large sales, promotion and marketing budget. As a result of our limited marketing capabilities, to achieve commercial success for any approved product for which we retain sales and marketing responsibilities, we must either develop a sales and marketing organization or outsource these functions to third parties. In the future, we may choose to build a focused sales, marketing and commercial support infrastructure to sell, or participate in sales activities with our collaborators for, some of our product candidates if and when they are approved.

Factors that may inhibit our efforts to commercialize our product candidates on our own include:

We may not be successful in entering into arrangements with third parties to commercialize our product candidates or may be unable to do so on terms that are favorable to us. We may have little control over such third parties, and any of them may fail to devote the necessary resources and attention to sell and market our products effectively. If we do not establish commercialization capabilities successfully, either on our own or in collaboration with third parties, we will not be successful in commercializing our product candidates.

We face significant competition in an environment of rapid technological change, and there is a possibility that our competitors may achieve regulatory approval before us or develop therapies that are safer or more advanced or effective than ours, which may harm our financial condition and our ability to successfully market or commercialize our product candidates.

The development and commercialization of new drug and biologic products is highly competitive. Moreover, the biotechnology field generally is characterized by rapidly changing technologies, significant competition and a strong emphasis on intellectual property. We will face competition with respect to briquilimab and any other product candidates that we develop or commercialize in the future from major pharmaceutical companies, specialty pharmaceutical companies and biotechnology companies worldwide. Potential competitors also include academic institutions, government agencies and other public and private research organizations that conduct research, seek patent protection and establish collaborative arrangements for research, development, manufacturing and commercialization.

There are a number of large pharmaceutical and biotechnology companies that currently market and sell products or are pursuing the development of products for the treatment of the disease indications for which we have product candidates and research programs. Some of these competitive products and therapies are based on scientific approaches that are the same as or similar to our approach, and others are based on entirely different approaches. Any product candidates that we successfully develop and commercialize will compete with existing therapies and new therapies that may become available in the future that are approved to treat the same diseases for which we may obtain approval for our product candidates. This may include other types of therapies, such as small molecule, antibody and/or protein therapies.

Many of our current or potential competitors, either alone or with their collaboration partners, may have significantly greater financial resources and expertise in research and development, manufacturing, preclinical testing, conducting clinical trials, obtaining regulatory approvals and marketing approved products than we do. Mergers and acquisitions in the pharmaceutical, biotechnology and gene therapy industries may result in even more resources being concentrated among a smaller number of our competitors. Smaller or early-stage companies may also prove to be significant competitors, particularly through collaborative arrangements with large and established companies. These competitors also compete with us in recruiting and retaining qualified scientific and management personnel and establishing clinical trial sites and patient registration for clinical trials, as well as in acquiring technologies complementary to, or necessary for, our programs. Our commercial opportunity could be reduced or eliminated if our competitors develop and commercialize product candidates that are safer, more effective, have fewer or less severe side effects, are more convenient or are less expensive than our product candidates or that would render our product candidates obsolete or non-competitive. Our competitors also may obtain FDA or other regulatory approval for their product candidates more rapidly than we may obtain approval for ours, which could result in our competitors establishing a strong market position before we are able to enter the market. Additionally, technologies developed by our competitors may render our product candidates uneconomical or obsolete, and we may not be successful in marketing any product candidates against competitors.

Competitors of briquilimab include the following: 

If product liability lawsuits are brought against us, we may incur substantial liabilities and may be required to limit commercialization of our product candidates.

We face an inherent risk of product liability exposure related to the testing in human clinical trials of our product candidates and will face an even greater risk if we commercially sell any products that we may develop. For example, we may be sued if our product candidates cause, or are perceived to cause, injury or are found to be otherwise unsuitable during clinical trials, manufacturing, marketing or sale. Any such product liability claims may include allegations of defects in manufacturing, defects in design, a failure to warn of dangers inherent in the product, negligence, strict liability or a breach of warranties. Claims could also be asserted under state consumer protection acts. If we cannot successfully defend ourselves against claims that our product candidates or products caused injuries, we could incur substantial liabilities or be required to limit commercialization of our product candidates. Even a successful defense would require significant financial and management resources. Regardless of merit or eventual outcome, liability claims may result in:

Although we maintain product liability insurance coverage, it may not be adequate to cover all liabilities that we may incur. We anticipate that we will need to increase our insurance coverage as we continue clinical trials and if we successfully commercializes any product. Insurance coverage is increasingly expensive. We may not be able to maintain insurance coverage at a reasonable cost or in an amount adequate to satisfy any liability that may arise.

Our product candidates are complex and difficult to manufacture. We could experience delays in satisfying regulatory authorities or production problems that result in delays in our development or commercialization programs, limit the supply of our product candidates, or otherwise harm our business.

Our product candidates require processing steps that are more complex than those required for most chemical and other biological pharmaceuticals. As a result, assays of the finished product candidate may not be sufficient to ensure that the product candidate will perform in the intended manner. Problems with the manufacturing process, even minor deviations from the normal process, could result in product defects or manufacturing failures that result in lot failures, product recalls, product liability claims, insufficient inventory or potentially delay progression of our clinical trials. If we successfully develop product candidates, we may encounter problems achieving adequate quantities and quality of clinical-grade materials that meet FDA, EMA or other comparable applicable foreign standards or specifications with consistent and acceptable production yields and costs. In addition, our product candidates will require complicated delivery modalities, such as electroporation, which will introduce additional complexities into the manufacturing process.

In addition, the FDA, the EMA and other regulatory authorities may require us to submit samples of any lot of approved product together with the protocols showing the results of applicable tests at any time. Under some circumstances, the FDA, the EMA or other regulatory authorities may require that we not distribute a lot until the agency authorizes its release. Slight deviations in the manufacturing process, including those affecting quality attributes and stability, may result in unacceptable changes in the product that could result in lot failures or product recalls. Lot failures or product recalls could cause us to delay clinical trials or product launches, which could be costly to us and otherwise harm our business, financial condition, results of operations and prospects.

Moreover, the clinical development of our product candidates depends on the availability of certain materials and agents used in our clinical trials. Specifically, our clinical trial protocols for briquilimab-based conditioning include the administration of fludarabine, and the FDA recently reported a shortage of fludarabine. Any failure or delays by us or by our clinical sites to obtain sufficient quantities of fludarabine or other components and agents necessary for the conduct of our clinical trials, may delay our ability to enroll and treat patients in, or complete, our current or future clinical trials of our product candidates on time, if at all. 

Some of the raw materials that we anticipate will be required in our manufacturing process are derived from biologic sources. Such raw materials are difficult to procure and may be subject to contamination or recall. A material shortage, contamination, recall or restriction on the use of biologically derived substances in the manufacture of our product candidates could adversely impact or disrupt the commercial manufacturing or the production of clinical material, which could materially harm our development timelines and our business, financial condition, results of operations and prospects.

If we or any contract research organizations, contract manufacturers or suppliers that we engage fail to comply with environmental, health and safety laws and regulations, we could become subject to fines or penalties or incur costs that could have a material adverse effect on the success of our business.

We and any contract research organizations, contract manufacturers and suppliers we engage are subject to numerous federal, state and local environmental, health and safety laws, regulations and permitting requirements, including those governing laboratory procedures; the generation, handling, use, storage, treatment and disposal of hazardous and regulated materials and wastes; the emission and discharge of hazardous materials into the ground, air and water; and employee health and safety. Our operations involve the use of hazardous and flammable materials, including chemicals and biological and radioactive materials. Our operations also produce hazardous waste. We generally contract with third parties for the disposal of these materials and wastes. Although we believe that our and such third parties’ procedures for handling, storing and disposing of these materials and waste comply with legally prescribed standards, we cannot eliminate the risk of contamination or injury from these materials. In the event of contamination or injury resulting from our use of hazardous materials, we could be held liable for any resulting damages, and any liability could exceed our resources. Under certain environmental laws, we could be held responsible for costs relating to any contamination at our current or past facilities and at third-party facilities. We also could incur significant costs associated with civil or criminal fines and penalties.

Compliance with applicable environmental laws and regulations may be expensive, and current or future environmental laws and regulations may impair our product development and research efforts. In addition, we cannot entirely eliminate the risk of accidental injury or contamination from these materials or wastes. Although we maintain workers’ compensation insurance to cover us for costs and expenses we may incur due to injuries to our employees resulting from the use of hazardous materials, this insurance may not provide adequate coverage against potential liabilities. We do not carry specific biological or hazardous waste insurance coverage, and our property, casualty and general liability insurance policies specifically exclude coverage for damages and fines arising from biological or hazardous waste exposure or contamination. Accordingly, in the event of contamination or injury, we could be held liable for damages or be penalized with fines in an amount exceeding our resources, and our clinical trials or regulatory approvals could be suspended, which could have a material adverse effect on our business, financial condition, results of operations and prospects.

In addition, we may incur substantial costs in order to comply with current or future environmental, health and safety laws, regulations and permitting requirements. For example, our products are considered to contain genetically modified organisms or cells, which are regulated in different ways depending upon the country in which preclinical research or clinical trials are conducted. These current or future laws, regulations and permitting requirements may impair our research, development or production efforts. Failure to comply with these laws, regulations and permitting requirements also may result in substantial fines, penalties or other sanctions or business disruption, which could have a material adverse effect on our business, financial condition, results of operations and prospects.

Any third-party contract research organizations, contract manufacturers and suppliers we engage will also be subject to these and other environmental, health and safety laws and regulations. Liabilities they incur pursuant to these laws and regulations could result in significant costs or an interruption in operations, which could have a material adverse effect on our business, financial condition, results of operations and prospects. 

Risks Related to Regulatory Review

If clinical trials of our product candidates fail to demonstrate safety and efficacy to the satisfaction of regulatory authorities or do not otherwise produce positive results, we may incur additional costs or experience delays in completing, or ultimately be unable to complete, the development and commercialization of such product candidates.

Before obtaining marketing approval from regulatory authorities for the sale of briquilimab and any other product candidates we identify and develop, we must complete preclinical development and then conduct extensive clinical trials to demonstrate the safety and efficacy of such product candidates in humans. Clinical testing is expensive, difficult to design and implement, can take many years to complete and is uncertain as to outcome. A failure of one or more clinical trials can occur at any stage of testing. The outcome of preclinical testing and early clinical trials may not be predictive of the success of later clinical trials, and interim results of a clinical trial do not necessarily predict final results. Moreover, preclinical and clinical data are often susceptible to varying interpretations and analyses. Many companies that have believed their product candidates performed satisfactorily in preclinical studies and clinical trials have nonetheless failed to obtain marketing approval of their product candidates.

We and our collaborators, if any, may experience numerous unforeseen events during, or as a result of, clinical trials that could delay or prevent our ability to receive marketing approval or commercialize any product candidates, including:

If we or our collaborators, if any, are required to conduct additional clinical trials or other testing of product candidates beyond those that we currently contemplate, if we or our collaborators are unable to successfully complete clinical trials or other testing of product candidates, or if the results of these trials or tests are not positive or are only modestly positive or if there are safety concerns, we or our collaborators may:

Product development costs will also increase if we or our collaborators experience delays in clinical trials or other testing or in obtaining marketing approvals. We do not know whether any clinical trials will begin as planned, will need to be restructured or will be completed on schedule, or at all. Significant clinical trial delays also could shorten any periods during which we may have the exclusive right to commercialize product candidates, could allow our competitors to bring products to market before we do and could impair our ability to successfully commercialize product candidates, any of which may harm our business, financial condition, results of operations and prospects.

Further, disruptions at the FDA and other agencies may prolong the time necessary for new drugs to be reviewed and/or approved by necessary government agencies, which would adversely affect our business. For example, over the last several years, the U.S. government has shut down several times and certain regulatory agencies, including the FDA, have furloughed critical employees and stopped critical activities. If a prolonged government shutdown occurs, it could significantly impact the ability of the FDA to timely review and process our regulatory submissions, which could have a material adverse effect on our business.

Failure to obtain marketing approval in foreign jurisdictions would prevent any product candidates we develop from being marketed in such jurisdictions, which, in turn, would materially impair our ability to generate revenue.

In order to market and sell any product candidates we develop in the European Union and many other foreign jurisdictions, we or our collaborators must obtain separate marketing approvals and comply with numerous and varying regulatory requirements. The approval procedure varies among countries and can involve additional testing. The time required to obtain approval may differ substantially from that required to obtain FDA approval. The regulatory approval process outside the United States generally includes all of the risks associated with obtaining FDA approval. In addition, in many countries outside the United States, it is required that the product be approved for reimbursement before the product can be approved for sale in that country. We or our collaborators may not obtain approvals from regulatory authorities outside the United States on a timely basis, if at all. Approval by the FDA does not ensure approval by regulatory authorities in other countries or jurisdictions, and approval by one regulatory authority outside the United States does not ensure approval by regulatory authorities in other countries or jurisdictions or by the FDA. We may not be able to file for marketing approvals and may not receive necessary approvals to commercialize our product candidates in any jurisdiction, which would materially impair our ability to generate revenue.

Additionally, we could face heightened risks with respect to seeking marketing approval in the United Kingdom as a result of the recent withdrawal of the United Kingdom from the European Union on December 31, 2020, commonly referred to as Brexit. Pursuant to the formal withdrawal arrangements agreed between the United Kingdom and the European Union, the United Kingdom withdrew from the European Union, effective December 31, 2020. On December 24, 2020, the United Kingdom and European Union entered into a Trade and Cooperation Agreement. The agreement sets out certain procedures for approval and recognition of medical products in each jurisdiction.

Since the regulatory framework for pharmaceutical products in the United Kingdom covering the quality, safety, and efficacy of pharmaceutical products, clinical trials, marketing authorization, commercial sales, and distribution of pharmaceutical products is derived from European Union directives and regulations, Brexit could materially impact the future regulatory regime that applies to products and the approval of product candidates in the United Kingdom. Any delay in obtaining, or an inability to obtain, any marketing approvals, as a result of Brexit or otherwise, would prevent us from commercializing any product candidates in the United Kingdom and/or the European Union and restrict our ability to generate revenue and achieve and sustain profitability. If any of these outcomes occur, we may be forced to restrict or delay efforts to seek regulatory approval in the United Kingdom and/or the European Union for any product candidates, which could significantly and materially harm our business.

Even if we complete the necessary clinical trials, we cannot predict when, or if, we will obtain regulatory approval to commercialize our product candidates in the United States or any other jurisdiction, and any such approval may be for a more narrow indication than we seek.

We cannot commercialize a product candidate until the appropriate regulatory authorities have reviewed and approved the product candidate. Even if our product candidates meet their safety and efficacy endpoints in clinical trials, the regulatory authorities may not complete their review processes in a timely manner, or we may not be able to obtain regulatory approval. Additional delays may result if an FDA Advisory Committee or other regulatory authority recommends non-approval or restrictions on approval. In addition, we may experience delays or rejections based upon additional government regulation from future legislation or administrative action, or changes in regulatory authority policy during the period of product development, clinical trials and the review process.

Regulatory authorities also may approve a product candidate for more limited indications than requested or they may impose significant limitations in the form of narrow indications, warnings or a REMS. These regulatory authorities may require labeling that includes precautions or contra-indications with respect to conditions of use, or they may grant approval subject to the performance of costly post-marketing clinical trials. In addition, regulatory authorities may not approve the labeling claims that are necessary or desirable for the successful commercialization of our product candidates. Any of the foregoing scenarios could materially harm the commercial prospects for our product candidates and materially adversely affect our business, financial condition, results of operations and prospects.

Marketing approval by the FDA in the United States, if obtained, does not ensure approval by regulatory authorities in other countries or jurisdictions. In addition, clinical trials conducted in one country may not be accepted by regulatory authorities in other countries, and regulatory approval in one country does not guarantee regulatory approval in any other country. Approval processes vary among countries and can involve additional product candidate testing and validation and additional administrative review periods. Seeking foreign regulatory approval could result in difficulties and costs for us and require additional preclinical studies or clinical trials, which could be costly and time-consuming. Regulatory requirements can vary widely from country to country and could delay or prevent the introduction of our product candidates we may develop in those countries. The foreign regulatory approval process involves all of the risks associated with FDA approval. We do not have any product candidates approved for sale in any jurisdiction, including international markets, and we do not have experience in obtaining regulatory approval in international markets. If we fail to comply with regulatory requirements in international markets or to obtain and maintain required approvals, or if regulatory approvals in international markets are delayed, our target market will be reduced and our ability to realize the full market potential of our product candidates will be unrealized.

Even if we obtain regulatory approval of any of our product candidates, the approved products may be subject to post-approval studies and will remain subject to ongoing regulatory requirements. If we fail to comply, or if concerns are identified in subsequent studies, our approval could be withdrawn, and our product sales could be suspended.

If we are successful at obtaining regulatory approval for briquilimab or any of our other product candidates, regulatory agencies in the U.S. and other countries where a product will be sold may require extensive additional clinical trials or post-approval clinical trials that are expensive and time-consuming to conduct. These studies may be expensive and time-consuming to conduct and may reveal side effects or other harmful effects in patients that use our therapeutic products after they are on the market, which may result in the limitation or withdrawal of our drugs from the market. Alternatively, we may not be able to conduct such additional trials, which might force us to abandon our efforts to develop or commercialize certain product candidates. Even if post-approval studies are not requested or required, after our products are approved and are on the market, there might be safety issues that emerge over time that require a change in product labeling, additional post-market studies or clinical trials, imposition of distribution and use restrictions under a REMS or withdrawal of the product from the market, which would cause our revenue to decline.

Additionally, any products that we may successfully develop will be subject to ongoing regulatory requirements after they are approved. These requirements will govern the manufacturing, packaging, marketing, distribution, and use of our products. If we fail to comply with such regulatory requirements, approval for our products may be withdrawn, and product sales may be suspended. We may not be able to regain compliance, or we may only be able to regain compliance after a lengthy delay, significant expense, lost revenues and/or damage to our reputation.

Interim “top-line” and preliminary results from our clinical trials that we may announce or publish from time to time may change as more patient data become available and are subject to audit and verification procedures that could result in material changes in the final data.

From time to time, we may publish interim top-line or preliminary results from our preclinical studies and clinical trials, which are based on a preliminary analysis of then-available data, and the results and related findings and conclusions are subject to change following a more comprehensive review of the data related to the particular study or trial. In particular, we have announced, and may in the future announce, interim results from our ongoing clinical trials of briquilimab. Interim results from clinical trials that we may complete are subject to the risk that one or more of the clinical outcomes may materially change as patient enrollment continues and more patient data become available. Preliminary or top-line results also remain subject to audit and verification procedures that may result in the final data being materially different from the preliminary data we previously published. As a result, interim and preliminary data should be viewed with caution until the final data are available. Differences between preliminary or interim data and final data could significantly harm our business prospects and may cause the trading price of our common stock to fluctuate significantly.

Further, others, including regulatory agencies, may not accept or agree with our assumptions, estimates, calculations, conclusions or analyses or may interpret or weigh the importance of data differently, which could impact the value of the particular program, the approvability or commercialization of the particular product candidate or product and us in general. In addition, the information we choose to publicly disclose regarding a particular study or clinical trial is based on what is typically extensive information, investors or others may not agree with what we determine is material or otherwise appropriate information to include in our disclosure, and any information we determine not to disclose may ultimately be deemed significant with respect to future decisions, conclusions, views, activities or otherwise regarding a particular product, product candidate or our business. If the interim, topline or preliminary data that we report differ from actual results, or if others, including regulatory authorities, disagree with the conclusions reached, our ability to obtain approval for, and commercialize, our product candidates may be harmed, which could harm our business, operating results, prospects or financial condition.

We may seek Fast Track or other accelerated review designations for some or all of our product candidates. We may not receive such designation, and even for those product candidates for which we do, it may not lead to a faster development or regulatory review or approval process, and will not increase the likelihood that product candidates will receive marketing approval.

We may seek Fast Track or other accelerated review designations for some or all of our other product candidates. If a drug or biologic is intended for the treatment of a serious or life-threatening condition or disease, and nonclinical or clinical data demonstrate the potential to address an unmet medical need, the product may qualify for FDA Fast Track designation, for which sponsors must apply. If granted, a Fast Track or other accelerated review designation makes a product candidate eligible for more frequent interactions with the FDA to discuss the development plan and clinical trial design, as well as rolling review of the application, which means that we can submit completed sections of our marketing application for review prior to completion of the entire submission. Marketing applications of product candidates with a Fast Track or other accelerated review designation may qualify for priority review under the policies and procedures offered by the FDA, but a Fast Track or other accelerated review designation does not assure any such qualification or ultimate marketing approval by the FDA. The FDA has broad discretion with respect to whether or not to grant this designation. Thus, even if we believe a particular product candidate is eligible for this designation, the FDA may decide not to grant it. Moreover, even if we do receive a Fast Track or another accelerated review designation, we or our collaborators may not experience a faster development process, review or approval compared to conventional FDA procedures. In addition, the FDA may withdraw a Fast Track or other accelerated review designation if it believes that the designation is no longer supported by data from our clinical development program.

We may seek priority review designation for our product candidates, but we might not receive such designation, and even if we do, such designation may not lead to a faster development or regulatory review or approval process.

If the FDA determines that a product candidate offers a treatment for a serious condition and, if approved, the product would provide a significant improvement in safety or effectiveness, the FDA may designate the product candidate for priority review. A priority review designation means that the goal for the FDA to review an application is six months, rather than the standard review period of ten months. The FDA has broad discretion with respect to whether or not to grant priority review status to a product candidate, so even if we believe a particular product candidate is eligible for such designation or status, the FDA may decide not to grant it. Moreover, a priority review designation does not necessarily mean a faster development or regulatory review or approval process or necessarily confer any advantage with respect to approval compared to conventional FDA procedures. Receiving priority review from the FDA does not guarantee approval within the six-month review cycle or at all.

A Breakthrough Therapy Designation by the FDA, even if granted for any of our product candidates, may not lead to a faster development or regulatory review or approval process, and it does not increase the likelihood that our product candidates will receive marketing approval.

We may seek a Breakthrough Therapy Designation for our product candidates if the clinical data support such a designation for one or more product candidates. A breakthrough therapy is defined as a drug or biologic that is intended, alone or in combination with one or more other drugs or biologics, to treat a serious or life-threatening disease or condition and preliminary clinical evidence indicates that the drug, or biologic, may demonstrate substantial improvement over existing therapies on one or more clinically significant endpoints, such as substantial treatment effects observed early in clinical development. For product candidates that have been designated as breakthrough therapies, interaction and communication between the FDA and the sponsor of the trial can help to identify the most efficient path for clinical development while minimizing the number of patients placed in ineffective control regimens. Drugs and biologics designated as breakthrough therapies by the FDA may also be eligible for accelerated approval.

Designation as a breakthrough therapy is within the discretion of the FDA. Accordingly, even if we believe one of our product candidates meets the criteria for designation as a breakthrough therapy, the FDA may disagree and determine not to make such designation. In any event, the receipt of a Breakthrough Therapy Designation for a product candidate may not result in a faster development process, review or approval compared to drugs considered for approval under non-expedited FDA review procedures and does not assure ultimate approval by the FDA. In addition, even if one or more of our product candidates qualify as breakthrough therapies, the FDA may later decide that the product no longer meets the conditions for such qualification.

We may not be able to obtain orphan drug exclusivity for one or more of our product candidates, and even if we do, that exclusivity may not prevent the FDA or EMA from approving other competing products.

Under the Orphan Drug Act of 1983, the FDA may designate a product as an orphan drug if it is a drug or biologic intended to treat a rare disease or condition. A similar regulatory scheme governs approval of orphan products by the EMA in the European Union. Generally, if a product candidate with an orphan drug designation subsequently receives the first marketing approval for the indication for which it has such designation, the product is entitled to a period of marketing exclusivity, which precludes the FDA or EMA from approving another marketing application for the same product for the same therapeutic indication for that time period. The applicable period is seven years in the United States and ten years in the European Union. The exclusivity period in the European Union can be reduced to six years if a product no longer meets the criteria for orphan drug designation, in particular if the product is sufficiently profitable so that market exclusivity is no longer justified.

In order for the FDA to grant orphan drug exclusivity to one of our products, the FDA must find that the product is indicated for the treatment of a condition or disease with a patient population of fewer than 200,000 individuals annually in the United States. The FDA may conclude that the condition or disease for which we may seek orphan drug exclusivity does not meet this standard. Even if we obtain orphan drug exclusivity for a product, that exclusivity may not effectively protect the product from competition because different products can be approved for the same condition. In particular, the concept of what constitutes the “same drug” for purposes of orphan drug exclusivity remains in flux in the context of gene therapies, and the FDA issued recent draft guidance suggesting that it would not consider two genetic medicine products to be different drugs solely based on minor differences in the transgenes or vectors within a given vector class. In addition, even after an orphan drug is approved, the FDA can subsequently approve the same product for the same condition if the FDA concludes that the later product is clinically superior in that it is shown to be safer, more effective or makes a major contribution to patient care. Orphan drug exclusivity may also be lost if the FDA or EMA determines that the request for designation was materially defective or if the manufacturer is unable to assure sufficient quantity of the product to meet the needs of the patients with the rare disease or condition.

In 2017, Congress passed the FDA Reauthorization Act of 2017 (the “FDARA”). FDARA, among other things, codified the FDA’s pre-existing regulatory interpretation to require that a drug sponsor demonstrate the clinical superiority of an orphan drug that is otherwise the same as a previously approved drug for the same rare disease in order to receive orphan drug exclusivity. Under omnibus legislation signed by President Trump on December 27, 2020, the requirement for a product to show clinical superiority applies to any drug and biologic that received orphan drug designation before enactment of FDARA in 2017 but has not yet been approved or licensed by the FDA. We do not know if, when, or how the FDA may change the orphan drug regulations and policies in the future, and it is uncertain how any changes might affect our business. Depending on what changes the FDA may make to its orphan drug regulations and policies, our business could be adversely impacted.

Disruptions at the FDA and other government agencies caused by funding shortages or global health concerns could hinder their ability to hire, retain or deploy key leadership and other personnel, or otherwise prevent new or modified products from being developed, approved or commercialized in a timely manner or at all, which could negatively impact our business.

The ability of the FDA to review and approve new products can be affected by a variety of factors, including government budget and funding levels, statutory, regulatory, and policy changes, the FDA’s ability to hire and retain key personnel and accept the payment of user fees, and other events that may otherwise affect the FDA’s ability to perform routine functions. Average review times at the agency have fluctuated in recent years as a result. In addition, government funding of other government agencies that fund research and development activities is subject to the political process, which is inherently fluid and unpredictable. Disruptions at the FDA and other agencies may also slow the time necessary for new biologics or modifications to cleared or approved biologics to be reviewed and/or approved by necessary government agencies, which would adversely affect our business. For example, over the last several years, including for 35 days beginning on December 22, 2018, the U.S. government has shut down several times and certain regulatory agencies, such as the FDA, have furloughed critical FDA employees and stopped critical activities. If a prolonged government shutdown occurs, it could significantly impact the ability of the FDA to timely review and process our regulatory submissions, which could have a material adverse effect on our business.

Separately, in response to the COVID-19 pandemic, on March 10, 2020, the FDA announced its intention to postpone most inspections of foreign manufacturing facilities, and on March 18, 2020, the FDA temporarily postponed routine surveillance inspections of domestic manufacturing facilities. Subsequently, on July 10, 2020, the FDA announced its intention to resume certain on-site inspections of domestic manufacturing facilities subject to a risk-based prioritization system. Increased cases associated with a COVID-19 variant led the FDA to again pause inspections, although the FDA announced in February 2022 that it would resume routine domestic surveillance inspections and that it would proceed with certain foreign surveillance inspections where country conditions permit. If another government shutdown occurs, or if global health concerns prevent the FDA or other regulatory authorities from conducting their regular inspections, reviews, or other regulatory activities, it could significantly impact the ability of the FDA or other regulatory authorities to timely review and process our regulatory submissions, which could have a material adverse effect on our business.

Risks Related to Our Relationships with Third Parties

We rely on third parties to conduct our preclinical and clinical trials and will rely on them to perform other tasks for us. If these third parties do not successfully carry out their contractual duties, meet expected deadlines or comply with regulatory requirements, we may not be able to obtain regulatory approval for or commercialize our product candidates and our business could be substantially harmed.

Although we have recruited a team that has experience with clinical trials, as a company, we have limited experience in conducting clinical trials. Moreover, we do not have the ability to independently conduct preclinical studies and clinical trials, and we have relied upon, and plan to continue to rely upon, medical institutions, clinical investigators, contract laboratories and other third parties, or our CROs, to conduct preclinical studies and future clinical trials for our product candidates. We expect to rely heavily on these parties for execution of preclinical and future clinical trials for our product candidates and control only certain aspects of their activities. Nevertheless, we will be responsible for ensuring that each of our preclinical and clinical trials is conducted in accordance with the applicable protocol, legal and regulatory requirements and scientific standards and our reliance on CROs will not relieve us of our regulatory responsibilities. For any violations of laws and regulations during the conduct of our preclinical studies and clinical trials, we could be subject to warning letters or enforcement action that may include civil penalties up to and including criminal prosecution.

We and our CROs will be required to comply with regulations, including cGCPs for conducting, monitoring, recording and reporting the results of preclinical and clinical trials to ensure that the data and results are scientifically credible and accurate and that the trial patients are adequately informed of the potential risks of participating in clinical trials and their rights are protected. These regulations are enforced by the FDA, the Competent Authorities of the Member States of the European Economic Area and comparable foreign regulatory authorities for any drugs in clinical development. The FDA enforces cGCP regulations through periodic inspections of clinical trial sponsors, principal investigators and trial sites. If we or our CROs fail to comply with applicable cGCPs, the clinical data generated in our clinical trials may be deemed unreliable and the FDA or comparable foreign regulatory authorities may require us to perform additional clinical trials before approving our marketing applications. We cannot assure you that, upon inspection, the FDA will determine that any of our future clinical trials will comply with cGCPs. In addition, our clinical trials must be conducted with product candidates produced in accordance with the requirements in the FDA’s current cGMPs requirements. Our failure or the failure of our CROs to comply with these regulations may require us to repeat clinical trials, which would delay the regulatory approval process and could also subject us to enforcement action.

Although we intend to design our planned clinical trials for our product candidates, for the foreseeable future CROs will conduct all of our planned clinical trials. As a result, many important aspects of our development programs, including their conduct and timing, will be outside of our direct control. Our reliance on third parties to conduct future preclinical studies and clinical trials will also result in less day-to-day control over the management of data developed through preclinical studies and clinical trials than would be the case if we were relying entirely upon our own staff.

If any of our relationships with these third-party CROs terminate, we may not be able to enter into arrangements with alternative CROs. If CROs do not successfully carry out their contractual duties or obligations or meet expected deadlines, if they need to be replaced or if the quality or accuracy of the clinical data they obtain is compromised due to the failure to adhere to our clinical protocols, regulatory requirements or for other reasons, any preclinical studies or clinical trials with which such CROs are associated with may be extended, delayed or terminated. In such cases, we may not be able to obtain regulatory approval for or successfully commercialize our product candidates. As a result, our financial results and the commercial prospects for our product candidates in the subject indication could be harmed, our costs could increase and our ability to generate revenue could be delayed.

We currently rely on a single manufacturer for our clinical supply of our product candidates. In the event of a loss of this manufacturer, or a failure by such manufacturer to comply with FDA regulations, we may not be able to find an alternative source on commercially reasonable terms, or at all. In addition, third-party manufacturers and any third-party collaborators may be unable to successfully scale-up manufacturing of our current or future product candidates in sufficient quality and quantity, which would delay or prevent us from developing our product candidates and commercializing approved products, if any.

We do not have any manufacturing facilities at the present time. We currently rely on third-party manufacturers, including Lonza Sales AG (“Lonza”) as a single source supplier, for the manufacture and supply of our materials for preclinical studies, and expect to continue to do so for future clinical testing and for commercial supply of briquilimab and any other product candidates that we may develop and for which we or our collaborators obtain marketing approval. Our agreement with Lonza includes certain limitations on our ability to enter into supply arrangements with any other supplier without Lonza’s consent. In addition, Lonza has the right to increase the prices it charges us for certain supplies depending on a number of factors, some of which are outside of our control. We may be unable to maintain or establish any agreements with third-party manufacturers or suppliers or to do so on acceptable terms. Even if we are able to establish agreements with third-party manufacturers or suppliers, reliance on third-party manufacturers entails additional risks, including:

In addition, pursuant to our Exclusive License Agreement with Amgen Inc., Lonza Biologics, Inc. has been engaged to manufacture briquilimab for us. The agreement provides that in the event we wish to change the manufacturer of briquilimab to a different party, we must obtain Amgen Inc.’s prior consent. As a result, our ability to obtain any alternative supplier of briquilimab may be further limited.

Third-party manufacturers may not be able to comply with cGMP regulations or similar regulatory requirements outside the United States. Our failure, or the failure of our third-party manufacturers or suppliers, to comply with applicable regulations could result in sanctions being imposed on us, including fines, injunctions, civil penalties, delays, suspension or withdrawal of approvals, license revocations, seizures or recalls of product candidates or products, operating restrictions and criminal prosecutions, any of which could significantly and adversely affect supplies of our products and harm our business, financial condition, results of operations and prospects.

Our product candidates may compete with other product candidates and products for access to manufacturing facilities and other supplies. There are a limited number of manufacturers that operate under cGMP regulations and that might be capable of manufacturing for us. Also, prior to the approval of our product candidates, we would need to identify a contract manufacturer that could produce our products at a commercial scale and that could successfully complete FDA pre-approval inspection and inspections by other health authorities. Agreements with such manufacturers or suppliers may not be available to us at the time we would need to have that capability and capacity.

Any performance failure on the part of our existing or future manufacturers or suppliers, or any decision by a manufacturer or supplier to remove our products from the market or restrict access to our products, could delay clinical development or marketing approval. We do not currently have arrangements in place for redundant or guaranteed supply for many of the materials we currently use in our clinical trials or preclinical studies, and we may have difficulty or be unable to establish alternative sources of these materials.

We may enter into collaborations with third parties for the research, development and commercialization of certain product candidates we may develop. If any such collaborations are not successful, we may not be able to capitalize on the market potential of those product candidates.

We may seek third-party collaborators for the research, development and commercialization of certain product candidates we may develop. If we enter into any such arrangements with any third parties, we will likely have limited control over the amount and timing of resources that our collaborators dedicate to the development or commercialization our product candidates. Our ability to generate revenues from these arrangements will depend on our collaborators’ abilities to successfully perform the functions assigned to them in these arrangements. We cannot predict the success of any collaboration that we enter into.

Collaborations involving our current or future product candidates or research programs pose numerous risks to us, including the following:

If our collaborations do not result in the successful development and commercialization of product candidates, or if one of our collaborators terminates our agreement with us, we may not receive any future research funding or milestone or royalty payments under the collaboration. If we do not receive the funding we expect under these agreements, our development of product candidates could be delayed, and we may need additional resources to develop product candidates. In addition, if one of our collaborators terminates its agreement with us, we may find it more difficult to find a suitable replacement collaborator or attract new collaborators, and our development programs may be delayed or the perception of us in the business and financial communities could be adversely affected. All of the risks relating to product development, regulatory approval and commercialization described in this Annual Report on Form 10-K apply to the activities of our collaborators.

These relationships, or those like them, may require us to incur non-recurring and other charges, increase our near- and long-term expenditures, issue securities that dilute our existing stockholders, or disrupt our management and business.

If we are not able to establish collaborations on commercially reasonable terms, we may have to alter our development and commercialization plans.

Our product development and research programs and the potential commercialization of briquilimab or any other product candidates we may develop will require substantial additional cash to fund expenses. For some of the product candidates we may develop, we may decide to collaborate with other pharmaceutical and biotechnology companies for the development and potential commercialization of those product candidates.

We would face significant competition in seeking appropriate collaborators. Whether we reach a definitive agreement for a collaboration will depend, among other things, upon our assessment of the collaborator’s resources and expertise, the terms and conditions of the proposed collaboration, and the proposed collaborator’s evaluation of a number of factors. Those factors may include the design or results of clinical trials, the likelihood of approval by the FDA, the EMA or similar regulatory authorities outside the United States, the potential market for the subject product candidate, the costs and complexities of manufacturing and delivering such product candidate to patients, the potential of competing products, the existence of uncertainty with respect to our ownership of technology, which can exist if there is a challenge to such ownership without regard to the merits of the challenge, and industry and market conditions generally. The collaborator may also consider alternative product candidates or technologies for similar indications that may be available to collaborate on and whether such a collaboration could be more attractive than the one with us. 

We may also be restricted under existing collaboration agreements from entering into future agreements on certain terms with potential collaborators. Collaborations are complex and time-consuming to negotiate and document. In addition, there have been a significant number of recent business combinations among large pharmaceutical companies that have resulted in a reduced number of potential future collaborators.

We may not be able to negotiate collaborations on a timely basis, on acceptable terms, or at all. If we are unable to do so, we may have to curtail the development of the product candidate for which we are seeking to collaborate, reduce or delay our development program or one or more of our other development programs, delay our potential commercialization or reduce the scope of any sales or marketing activities, or increase our expenditures and undertake development or commercialization activities at our own expense. If we elect to increase our expenditures to fund development or commercialization activities on our own, we may need to obtain additional capital, which may not be available to us on acceptable terms or at all. If we do not have sufficient funds, we may not be able to develop product candidates or bring them to market and generate product revenue.

Risks Related to Our Intellectual Property

We are highly dependent on intellectual property licensed from third parties, and termination of any of these licenses could result in the loss of significant rights, which would harm our business.

We are dependent on the patents, know-how and proprietary technology licensed from third parties for the development and, if approved, commercialization of briquilimab. Any termination of these licenses, or a finding that such intellectual property lacks legal effect, could result in the loss of significant rights and could harm our ability to commercialize our current or future product candidates.

For example, we rely on our worldwide exclusive license agreement with Amgen Inc., whereby we license a patent portfolio from Amgen Inc. applicable to our targeted conditioning program that contains patent families directed to humanized c-kit antibody. We also rely on our license agreement with Stanford, whereby we license a patent portfolio applicable to our targeted conditioning program that contains patent families directed to immunodepletion of endogenous stem cell niche for engraftment.

Each of our license agreements with third parties impose certain obligations on us, including obligations to use diligent efforts to meet development thresholds and payment obligations. Non-compliance with such obligations may result in termination of the respective license agreement or in legal and financial consequences. If any of our licensors terminates its respective license agreement, we may not be able to develop or commercialize briquilimab or any other product candidates covered by these agreements. Termination of our license agreements or reduction or elimination of our rights under them may result in us having to negotiate a new or reinstated agreement, which may not be available to us on equally favorable terms, or at all, which may mean we are unable to develop, commercialize or sell the affected product candidate or may cause us to lose our rights under the agreement.

In addition, our licensors may make decisions in prosecuting, maintaining, enforcing and defending any licensed intellectual property rights that may not be in our best interest. Moreover, if our licensors take any action with respect to any licensed intellectual property rights, for example, any licensed patents or patent applications, that results in a successful challenge to the licensed intellectual property by a third party, such patents may be invalidated or held to be unenforceable, and we may lose our rights under such patents, which could materially harm our business.

Further, the agreements under which we currently license intellectual property from third parties are complex, and certain provisions in such agreements may be susceptible to multiple interpretations. Accordingly, disputes may arise between us and our licensors regarding intellectual property subject to a license agreement. The resolution of any contract interpretation disagreement that may arise could narrow what we believe to be the scope of our rights to the relevant intellectual property or technology, or increase what we believe to be our financial or other obligations under the relevant agreement. If disputes over intellectual property that we have licensed prevent or impair our ability to maintain our current licensing arrangements on acceptable terms, or are insufficient to provide us with the necessary rights to use the intellectual property, we may be unable to successfully develop and commercialize the affected product candidates.

Our commercial success depends on our ability to obtain, maintain and protect our intellectual property and proprietary technology.

Our commercial success depends in large part on our ability to obtain, maintain and protect intellectual property rights through patents, trademarks and trade secrets in the United States and other countries with respect to our proprietary product candidates. If we do not adequately protect our intellectual property rights, competitors may be able to erode, negate or preempt any competitive advantage we may have, which could harm our business and ability to achieve profitability.

To protect our proprietary position, we own and have in-licensed certain intellectual property rights, including certain issued patents and patent applications, and have filed and may file provisional and non-provisional patent applications in the United States or abroad related to our product candidates that are important to our business. Provisional patent applications are not eligible to become issued patents until, among other things, we file a non-provisional patent application within 12 months of the filing of one or more of our related provisional patent applications. If we do not timely file non-provisional patent applications, we may lose our priority date with respect to our provisional patent applications and any patent protection on the inventions disclosed in our provisional patent applications. While we intend to timely file non-provisional patent applications relating to our provisional patent applications, we cannot predict whether any such patent applications will result in the issuance of patents that provide us with any competitive advantage. Moreover, the patent application and approval process is expensive and time-consuming. We may not be able to file and prosecute all necessary or desirable patent applications at a reasonable cost or in a timely manner.

The patent application, prosecution, and enforcement processes are subject to numerous risks and uncertainties, and there can be no assurance that we, our licensors, or any of our future collaborators will be successful in protecting our product candidates by obtaining, defending, and/or asserting patent rights. These risks and uncertainties include the following:

In some instances, agreements through which we license intellectual property rights may not give us control over patent prosecution or maintenance, so that we may not be able to control which claims or arguments are presented, how claims are amended, and may not be able to secure, maintain or successfully enforce necessary or desirable patent protection from those patent rights. We cannot be certain that patent prosecution and maintenance activities by our licensors have been or will be conducted in compliance with applicable laws and regulations or will result in valid and enforceable patents.

Moreover, some of our in-licensed patents and patent applications may be, and some of our future owned and licensed patents may be, co-owned with third parties. If we are unable to obtain an exclusive license to any such third-party co-owners’ interest in such patents or patent applications, such co-owners may be able to license their rights to other third parties, including our competitors, and our competitors could market competing products and technology. In addition, we may need the cooperation of any such co-owners of our patents in order to enforce such patents against third parties, and such cooperation may not be provided to us.

The patent protection we obtain for our product candidates may not be sufficient enough to provide us with any competitive advantage or our patents may be challenged.

Our owned and licensed patents and pending patent applications, if issued, may not provide us with any meaningful protection or may not prevent competitors from designing around our patent claims to circumvent our patents by developing similar or alternative technologies or therapeutics in a non-infringing manner. For example, a third party may develop a competitive product that provides benefits similar to one or more of our product candidates but falls outside the scope of our patent protection or license rights. If the patent protection provided by the patents and patent applications we hold or pursue with respect to our product candidates is not sufficiently broad to impede such competition, our ability to successfully commercialize our product candidates could be negatively affected, which would harm our business. Currently, a significant portion of our patents and patent applications are in-licensed, though similar risks would apply to any patents or patent applications that we now own or may own or in-license in the future.

It is possible that defects of form in the preparation or filing of our patents or patent applications may exist, or may arise in the future, for example with respect to proper priority claims, inventorship, claim scope or requests for patent term adjustments. If we or our partners, collaborators, licensees or licensors, whether current or future, fail to establish, maintain or protect such patents and other intellectual property rights, such rights may be reduced or eliminated. If our partners, collaborators, licensees or licensors, are not fully cooperative or disagree with us as to the prosecution, maintenance or enforcement of any patent rights, such patent rights could be compromised. If there are material defects in the form, preparation, prosecution or enforcement of our patents or patent applications, such patents may be invalid and/or unenforceable, and such applications may never result in valid, enforceable patents. Any of these outcomes could impair our ability to prevent competition from third parties, which may have an adverse impact on our business.

In addition, the determination of patent rights with respect to clinical compositions of matter and treatment methods commonly involves complex legal and factual questions, which are dependent upon the current legal and intellectual property context, extant legal precedent and interpretations of the law by individuals. As a result, the issuance, scope, validity, enforceability and commercial value of our patent rights are characterized by uncertainty.

Changes in either the patent laws or interpretation of the patent laws in the United States and other countries may diminish the value of our patents or narrow the scope of our patent protection. In addition, the laws of foreign countries may not protect our rights to the same extent or in the same manner as the laws of the United States. For example, patent laws in various jurisdictions, including significant commercial markets such as Europe, restrict the patentability of methods of treatment of the human body more than U.S. law does. If these changes were to occur, they could have a material adverse effect on our ability to generate revenue.

Pending patent applications cannot be enforced against third parties practicing the technology claimed in such applications unless and until a patent issues from such applications. Assuming the other requirements for patentability are met, currently, the first party to file a patent application is generally entitled to the patent. However, prior to March 16, 2013, in the United States, the first party to invent was entitled to the patent. Publications of discoveries in the scientific literature often lag behind the actual discoveries, and patent applications in the United States and other jurisdictions are not published until 18 months after filing, or in some cases not at all. Therefore, we cannot be certain that we were the first to make the inventions claimed in our patents or pending patent applications, or that we were the first to file for patent protection of such inventions. Similarly, we cannot be certain that parties from whom we do or may license or purchase patent rights were the first to make relevant claimed inventions, or were the first to file for patent protection for them. If third parties have filed prior patent applications on inventions claimed in our patents or applications that were filed on or before March 15, 2013, an interference proceeding in the United States can be initiated by such third parties to determine who was the first to invent any of the subject matter covered by the patent claims of our applications. If third parties have filed such prior applications after March 15, 2013, a derivation proceeding in the United States can be initiated by such third parties to determine whether our invention was derived from theirs.

Moreover, because the issuance of a patent is not conclusive as to its inventorship, scope, validity or enforceability, our owned and licensed patents or pending patent applications may be challenged in the courts or patent offices in the United States and abroad. There is no assurance that all of the potentially relevant prior art relating to our patents and patent applications has been found. If such prior art exists, it may be used to invalidate a patent, or may prevent a patent from issuing from a pending patent application. For example, such patent filings may be subject to a third-party submission of prior art to the USPTO, or to other patent offices around the world. Alternately or additionally, we may become involved in post-grant review procedures, oppositions, derivation proceedings, ex parte reexaminations, inter parties review, supplemental examinations, or interference proceedings or challenges in district court, in the United States or in various foreign patent offices, including both national and regional, challenging patents or patent applications in which we have rights, including patents on which we rely to protect our business. For example, the two European patents we have licensed from Stanford are currently being opposed. An adverse determination in these oppositions or any other challenges to our patents or patent applications may result in loss of the patent or in patent claims being narrowed, invalidated or held unenforceable, in whole or in part, or in denial of the patent application or loss or reduction in the scope of one or more claims of the patent application, any of which could limit our ability to stop others from using or commercializing similar or identical technology and products, or limit the duration of the patent protection of our technology and products. In addition, given the amount of time required for the development, testing and regulatory review of new product candidates, patents protecting such candidates might expire before or shortly after such candidates are commercialized.

Issued patents that we have or may obtain or license may not provide us with any meaningful protection, prevent competitors from competing with us or otherwise provide us with any competitive advantage. Our competitors may be able to circumvent our patents by developing similar or alternative technologies or products in a non-infringing manner. Our competitors may also seek approval to market their own products similar to or otherwise competitive with our products. Alternatively, our competitors may seek to market generic versions of any approved products or pursue similar strategies in the United States or other jurisdictions, in which they claim that patents owned or licensed by us are invalid, unenforceable or not infringed. In these circumstances, we may need to defend or assert our patents, or both, including by filing lawsuits alleging patent infringement. In any of these types of proceedings, a court or other agency with jurisdiction may find our patents invalid or unenforceable, or that our competitors are competing in a non-infringing manner. Thus, even if we have valid and enforceable patents, these patents still may not provide protection against competing products or processes sufficient to achieve our business objectives. Any of the foregoing could have a material adverse effect on our business, financial condition, results of operations and prospects.

Other parties have developed or may develop technologies that may be related to or competitive with our approach, and may have filed or may file patent applications and may have been issued or may be issued patents with claims that overlap or conflict with our patent applications, either by claiming the same materials, formulations or methods, or by claiming subject matter that could dominate our patent position. In addition, certain parts or all of the patent portfolios licensed to us are, or may be, licensed to third parties and such third parties may have or may obtain certain enforcement rights. If the scope of the patent protection we or our licensors obtain is not sufficiently broad, we may not be able to prevent others from developing and commercializing technology and products similar or identical to ours. The degree of patent protection we require to successfully compete in the marketplace may be unavailable or severely limited in some cases and may not adequately protect our rights or permit us to gain or keep any competitive advantage. We cannot provide any assurances that any of our licensed patents have, or that any of our pending owned or licensed patent applications that mature into issued patents will include, claims with a scope sufficient to protect our product candidates or otherwise provide any competitive advantage, nor can we provide any assurance that our licenses will remain in force.

In addition, there are situations in which noncompliance can result in abandonment or lapse of the patent or patent application, resulting in partial or complete loss of patent rights in the relevant jurisdiction. Noncompliance events that could result in abandonment or lapse of a patent or patent application include, but are not limited to, failure to respond to official actions within prescribed time limits, non-payment of fees and failure to properly legalize and submit formal documents.

Obtaining and maintaining our patent protection depends on compliance with various procedural, document submission, fee payment and other requirements imposed by governmental patent agencies, and our patent protection could be reduced or eliminated for non-compliance with these requirements.

Periodic maintenance fees on any issued patent are due to be paid to the USPTO and foreign patent agencies in several stages over the lifetime of the patent. The USPTO and various foreign governmental patent agencies require compliance with a number of procedural, documentary, fee payment and other similar provisions during the patent application process. While an inadvertent lapse can in many cases be cured by payment of a late fee or by other means in accordance with the applicable rules, there are situations in which noncompliance can result in abandonment or lapse of the patent or patent application, resulting in partial or complete loss of patent rights in the relevant jurisdiction. Noncompliance events that could result in abandonment or lapse of a patent or patent application include, but are not limited to, failure to respond to official actions within prescribed time limits, non-payment of fees and failure to properly legalize and submit formal documents. In such an event, our competitors might be able to enter the market earlier than would otherwise have been the case, which would have a material adverse effect on our business, financial condition, results of operations, and prospects.

If we are unable to protect the confidentiality of our trade secrets, our business and competitive position may be harmed.

In addition to the protection afforded by patents, we rely upon trade secret protection, know-how and continuing technological innovation to develop and maintain our competitive position. We seek to protect our proprietary technology and processes, in part, by entering into confidentiality agreements with our contractors, collaborators, scientific advisors, employees and consultants and invention assignment agreements with our consultants and employees. However, we may not obtain these agreements in all circumstances, and individuals with whom we have these agreements may not comply with their terms. The assignment of intellectual property rights under these agreements may not be self-executing or the assignment agreements may be breached, and we may be forced to bring claims against third parties, or defend claims that they may bring against us, to determine the ownership of what we regard as our intellectual property. In addition, we may not be able to prevent the unauthorized disclosure or use of our technical know-how or other trade secrets by the parties to these agreements despite the existence of confidentiality agreements and other contractual restrictions. Monitoring unauthorized uses and disclosures is difficult and we do not know whether the steps we have taken to protect our proprietary technologies will be effective. If any of the contractors, collaborators, scientific advisors, employees and consultants who are parties to these agreements breaches or violates the terms of any of these agreements, we may not have adequate remedies for any such breach or violation. As a result, we could lose our trade secrets. Enforcing a claim against a third party that illegally obtained and is using our trade secrets, like patent litigation, is expensive and time-consuming and the outcome is unpredictable. In addition, courts outside the United States are sometimes less willing or unwilling to protect trade secrets. Any of the foregoing could have a material adverse effect on our business, financial condition, results of operations, and prospects.

Moreover, our trade secrets could otherwise become known or be independently discovered by our competitors or other third parties. Competitors and other third parties could attempt to replicate some or all of the competitive advantages we derive from our development efforts, willfully infringe our intellectual property rights, design around our protected technology or develop their own competitive technologies that fall outside of our intellectual property rights. If any of our trade secrets were to be lawfully obtained or independently developed by a competitor or other third party, we would have no right to prevent them, or those to whom they communicate it, from using that technology or information to compete with us. If our trade secrets are not adequately protected or sufficient to provide an advantage over our competitors, our competitive position could be adversely affected, as could our business. Additionally, if the steps taken to maintain our trade secrets are deemed inadequate, we may have insufficient recourse against third parties for misappropriating our trade secrets.

If our trademarks and trade names are not adequately protected, then we may not be able to build name recognition in our markets of interest and our business may be adversely affected.

Our current or future trademarks or trade names may be challenged, infringed, circumvented or declared generic or descriptive or determined to be infringing on other marks. We may not be able to protect our rights to these trademarks and trade names or may be forced to stop using these names, which we need for name recognition by potential partners or customers in our markets of interest. Our company name and logo, as well as our product candidate names “briquilimab”, “JSP191”, and “JSP502”, are not registered trademarks. If we seek to register any of our trademarks, during trademark registration proceedings, we may receive rejections of our applications by the USPTO or in other foreign jurisdictions. Although we would be given an opportunity to respond to those rejections, we may be unable to overcome such rejections. In addition, in the USPTO and in comparable agencies in many foreign jurisdictions, third parties are given an opportunity to oppose pending trademark applications and to seek to cancel registered trademarks. Opposition or cancellation proceedings may be filed against our trademarks, and our trademarks may not survive such proceedings. If we are unable to establish name recognition based on our trademarks and trade names, we may not be able to compete effectively and our business may be adversely affected. We may license our trademarks and trade names to third parties, such as distributors. Although these license agreements may provide guidelines for how our trademarks and trade names may be used, a breach of these agreements or misuse of our trademarks and tradenames by our licensees may jeopardize our rights in or diminish the goodwill associated with our trademarks and trade names.

Moreover, any name we have proposed to use with our product candidate in the United States must be approved by the FDA, regardless of whether we have registered it, or applied to register it, as a trademark. Similar requirements exist in Europe. The FDA typically conducts a review of proposed product names, including an evaluation of potential for confusion with other product names. If the FDA (or an equivalent administrative body in a foreign jurisdiction) objects to any of our proposed proprietary product names, we may be required to expend significant additional resources in an effort to identify a suitable substitute name that would qualify under applicable trademark laws, not infringe the existing rights of third parties and be acceptable to the FDA. Furthermore, in many countries, owning and maintaining a trademark registration may not provide an adequate defense against a subsequent infringement claim asserted by the owner of a senior trademark. At times, competitors or other third parties may adopt trade names or trademarks similar to ours, thereby impeding our ability to build brand identity and possibly leading to market confusion. In addition, there could be potential trade name or trademark infringement claims brought by owners of other registered trademarks or trademarks that incorporate variations of our registered or unregistered trademarks or trade names. If we assert trademark infringement claims, a court may determine that the marks we have asserted are invalid or unenforceable, or that the party against whom we have asserted trademark infringement has superior rights to the marks in question. In this case, we could ultimately be forced to cease use of such trademarks.

We may not be successful in acquiring or in-licensing necessary rights to key technologies underlying briquilimab or any future product candidates we may develop.

We currently have rights to intellectual property, through licenses from third parties, to develop briquilimab, and we expect to seek to expand our intellectual property footprint related to our product candidate pipeline in part by in-licensing the rights to key technologies. The future growth of our business will depend in part on our ability to in-license or otherwise acquire the rights to develop additional product candidates and technologies. Although we have succeeded in licensing technologies from third-party licensors, including Amgen Inc. and Stanford, in the past, we can give no assurance that we will be able to in-license or acquire the rights to other technologies relevant to our product candidates from third parties on acceptable terms or at all.

In order to market our product candidates, we may find it necessary or prudent to obtain licenses from such third-party intellectual property holders. However, it may be unclear who owns the rights to intellectual property we wish to obtain, or we may be unable to secure such licenses or otherwise acquire or in-license intellectual property rights from third parties that we identify as necessary for product candidates we may develop and technology we employ. We currently conduct our preclinical research and clinical trials under 35 U.S.C. § 271(e)(1), which provides a safe harbor from patent infringement for uses of patented technology reasonably related to the development and submission of information under a federal law which regulates the manufacture, use, or sale of drugs.

The licensing or acquisition of third-party intellectual property rights is a highly competitive area, and other companies may pursue strategies to license or acquire third-party intellectual property rights that we may consider attractive or necessary. Such companies may have a competitive advantage over us, e.g., due to their size, capital resources and greater clinical development and commercialization capabilities. In addition, companies that perceive us to be a competitor may be unwilling to assign or license rights to us. We also may be unable to license or acquire third-party intellectual property rights on terms that would allow us to make an appropriate return on our investment or at all. If we are unable to successfully obtain rights to required third-party intellectual property rights or maintain the existing intellectual property rights we have, we may have to abandon development of the relevant program or product candidate, which could have a material adverse effect on our business, financial condition, results of operations and prospects.

Even if we were able to obtain such a license, it could be non-exclusive, thereby giving our competitors and other third parties access to the same technologies licensed to us, and it could require us to make substantial licensing and royalty payments. If we are unable to obtain a necessary license to a third-party patent on commercially reasonable terms, we may be unable to commercialize our product candidates or such commercialization efforts may be significantly delayed, which could in turn significantly harm our business.

Third-party claims of intellectual property infringement, misappropriation or other violations may prevent or delay our product discovery and development efforts and have a material adverse effect on our business.

Our commercial success depends in part on us avoiding infringement, misappropriation and other violations of the patents and proprietary rights of third parties. There is a substantial amount of litigation involving patents and other intellectual property rights in the biotechnology and pharmaceutical industries, as well as administrative proceedings for challenging patents, including interference and reexamination proceedings before the USPTO or oppositions and other comparable proceedings in foreign jurisdictions. Recently, under U.S. patent reform, new procedures including inter partes review and post grant review have been implemented. This reform will bring uncertainty to the possibility of challenge to our patents in the future. Numerous U.S.-and foreign-issued patents and pending patent applications, which are owned by third parties, exist in the fields in which we are developing our product candidates, and third parties may allege they have patent rights encompassing our product candidates, technologies or methods. Third parties may assert that we are employing their proprietary technology without authorization and may file patent infringement claims or lawsuits against us, and if we are found to infringe such third-party patents, we may be required to pay damages, cease commercialization of the infringing technology or obtain a license from such third parties, which may not be available on commercially reasonable terms or at all.

There may be third-party patents with patent rights to materials, formulations, methods of manufacture or methods of treatment related to the use or manufacture of our product candidates. Because patent applications can take many years to issue, there may be currently pending patent applications which may later result in issued patents that our product candidates may infringe. In addition, third parties may obtain patents in the future and claim that use of our technologies infringes upon these patents. Further, we or our licensors may fail to identify even those relevant third-party patents that have issued or may incorrectly interpret the relevance, scope or expiration of such patents. The scope of a patent claim is determined by an interpretation of the law, the written disclosure in a patent and the patent’s prosecution history. Our interpretation of the relevance or scope of a patent or a pending application may be incorrect. If any third-party patents were held by a court of competent jurisdiction to cover the manufacturing process of our product candidates, materials used in or formed during the manufacturing process or any final product itself, the holders of any such patents may be able to block our ability to commercialize the product candidate unless we obtained a license under the applicable patents, or until such patents expire or they are finally determined to be held invalid or unenforceable. Similarly, if any third-party patent were held by a court of competent jurisdiction to cover aspects of our materials, formulations or methods, including without limitation, combination therapy or patient selection methods, the holders of any such patent may be able to block our ability to develop and commercialize the product candidate unless we obtained a license or until such patent expires or is finally determined to be held invalid or unenforceable.

Parties making claims against us may seek and obtain injunctive or other equitable relief, which could effectively block our ability to further develop and commercialize our product candidates. Defense of these claims, regardless of their merit, would involve substantial litigation expense and would involve a substantial diversion of employee resources from our business. We may not have sufficient resources to bring these actions to a successful conclusion, which may result in significant cost and may impede our inability to pursue any affected products or product candidates. There could also be public announcements of the results of hearings, motions or other interim proceedings or developments. If securities analysts or investors perceive these results to be negative, it could have a material adverse effect on the price of shares of our common stock.

In the event of a successful claim of infringement against us, we may have to pay substantial damages, including treble damages and attorneys’ fees for willful infringement, obtain one or more licenses from third parties, pay royalties or redesign our infringing products, which may be impossible or require substantial time and monetary expenditure.

Some intellectual property that we have in-licensed may have been discovered through government-funded programs and thus may be subject to federal regulations such as “march-in” rights, certain reporting requirements and a preference for U.S.-based companies. Compliance with such regulations may limit our exclusive rights and limit our ability to contract with non-U.S. manufacturers.

Any of the intellectual property rights that we have licensed or may license in the future and that have been generated through the use of U.S. government funding are subject to certain federal regulations. As a result, the U.S. government may have certain rights to intellectual property embodied in our current or future product candidates pursuant to the Bayh-Dole Act of 1980 (“Bayh-Dole Act”). These U.S. government rights in certain inventions developed under a government-funded program include a non-exclusive, non-transferable, irrevocable worldwide license to use inventions for any governmental purpose. In addition, the U.S. government would have the right to require us to grant exclusive, partially exclusive, or non-exclusive licenses to any such intellectual property rights to a third party if it determines that:

The U.S. government also has the right to take title to such intellectual property rights if we, or the applicable licensor, fail to disclose the invention to the government and fail to file an application to register the intellectual property within specified time limits. Intellectual property generated under a government-funded program is also subject to certain reporting requirements, compliance with which may require us or the applicable licensor to expend substantial resources. We cannot be certain that our current or future licensors will comply with the disclosure or reporting requirements of the Bayh-Dole Act at all times, or be able to rectify any lapse in compliance with these requirements.

In addition, the U.S. government requires that any products embodying the subject invention or produced through the use of the subject invention be manufactured substantially in the United States. The manufacturing preference requirement can be waived if the owner of the intellectual property can show that reasonable but unsuccessful efforts have been made to grant licenses on similar terms to potential licensees that would be likely to manufacture substantially in the United States or that under the circumstances domestic manufacture is not commercially feasible. This preference for U.S. manufacturers may limit our ability to contract with non-U.S. product manufacturers for products covered by such intellectual property. To the extent any of our current or future intellectual property is generated through the use of U.S. government funding, the provisions of the Bayh-Dole Act may similarly apply.

We may become involved in lawsuits to protect or enforce our patents or other intellectual property, which could be expensive, time-consuming and unsuccessful.

Competitors may infringe our patents, trademarks, copyrights or other intellectual property. To counter infringement or unauthorized use, we may be required to file infringement claims, which can be expensive and time-consuming and divert the time and attention of our management and scientific personnel. Any claims we assert against perceived infringers could provoke these parties to assert counterclaims against us alleging that we infringe their patents, in addition to counterclaims asserting that our patents are invalid or unenforceable, or both. In any patent infringement proceeding, there is a risk that a court will decide that a patent of ours is invalid or unenforceable, in whole or in part, and that we do not have the right to stop the other party from using the invention at issue. There is also a risk that, even if the validity of such patents is upheld, the court will construe the patent’s claims narrowly or decide that we do not have the right to stop the other party from using the invention at issue on the grounds that our patent claims do not cover the invention. An adverse outcome in a litigation or proceeding involving our patents could limit our ability to assert our patents against those parties or other competitors, and may curtail or preclude our ability to exclude third parties from making and selling similar or competitive products. Any of these occurrences could adversely affect our competitive business position, business prospects and financial condition. Similarly, if we assert trademark infringement claims, a court may determine that the marks we have asserted are invalid or unenforceable, or that the party against whom we have asserted trademark infringement has superior rights to the marks in question. In this case, we could ultimately be forced to cease use of such trademarks.

Even if we establish infringement, the court may decide not to grant an injunction against further infringing activity and instead award only monetary damages, which may or may not be an adequate remedy. Furthermore, because of the substantial amount of discovery required in connection with intellectual property litigation, there is a risk that some of our confidential information could be compromised by disclosure during litigation. There could also be public announcements of the results of hearings, motions or other interim proceedings or developments. If securities analysts or investors perceive these results to be negative, it could have a material adverse effect on the price of shares of our common stock. Moreover, there can be no assurance that we will have sufficient financial or other resources to file and pursue such infringement claims, which typically last for years before they are concluded. Even if we ultimately prevail in such claims, the monetary cost of such litigation and the diversion of the attention of our management and scientific personnel could outweigh any benefit we receive as a result of the proceedings. Any of the foregoing may have a material adverse effect on our business, financial condition, results of operations and prospects.

We may not be able to protect our intellectual property rights throughout the world.

Filing, prosecuting, maintaining, defending and enforcing patents on our product candidates in all countries throughout the world would be prohibitively expensive, and our intellectual property rights in some countries outside the United States can be less extensive than those in the United States. In addition, the laws of some foreign countries do not protect intellectual property rights to the same extent as federal and state laws in the United States. Consequently, we may not be able to prevent third parties from practicing our inventions in all countries outside the United States, or from selling or importing products made using our inventions in and into the United States or other jurisdictions. Competitors may use our technologies in jurisdictions where we have not obtained patent protection to develop their own drugs and may export otherwise infringing drugs to territories where we have patent protection, but enforcement rights are not as strong as those in the United States. These drugs may compete with our product candidates and our patents or other intellectual property rights may not be effective or sufficient to prevent them from competing.

Many companies have encountered significant problems in protecting and defending intellectual property rights in foreign jurisdictions. The legal systems of some countries do not favor the enforcement of patents and other intellectual property protection, which could make it difficult for us to stop the infringement of our patents generally. Proceedings to enforce our patent rights in foreign jurisdictions could result in substantial costs and divert our efforts and attention from other aspects of our business, could put our patents at risk of being invalidated or interpreted narrowly and our patent applications at risk of not issuing and could provoke third parties to assert claims against us. We may not prevail in any lawsuits that we initiate, and the damages or other remedies awarded, if any, may not be commercially meaningful.

Many countries have compulsory licensing laws under which a patent owner may be compelled under specified circumstances to grant licenses to third parties. In addition, many countries limit the enforceability of patents against government agencies or government contractors. In those countries, we may have limited remedies if patents are infringed or if we are compelled to grant a license to a third party, which could materially diminish the value of those patents. This could limit our potential revenue opportunities. Accordingly, our efforts to enforce our intellectual property rights around the world may be inadequate to obtain a significant commercial advantage from the intellectual property that we develop or license, which could adversely affect our business, financial condition, results of operations, and prospects.

If we do not obtain patent term extension and data exclusivity for briquilimab or any other product candidates we may develop, our business may be materially harmed.

Depending upon the timing, duration and conditions of any FDA marketing approval of our product candidates, one or more of our U.S. patents may be eligible for limited patent term extension under the Drug Price Competition and Patent Term Restoration Act of 1984, referred to as the Hatch-Waxman Amendments, and similar legislation in the European Union. The Hatch-Waxman Amendments permit a patent term extension of up to five years for a patent covering an approved product as compensation for effective patent term lost during product development and the FDA regulatory review process. However, we may not receive an extension if we fail to exercise due diligence during the testing phase or regulatory review process, fail to apply within applicable deadlines, fail to apply prior to expiration of relevant patents or otherwise fail to satisfy applicable requirements. Moreover, the length of the extension could be less than we request. Only one patent per approved product can be extended; the extension cannot extend the total patent term beyond 14 years from approval; and only those claims covering the approved drug, a method for using it or a method for manufacturing it may be extended. If we are unable to obtain patent term extension or the term of any such extension is less than we request, the period during which we can enforce our patent rights for the applicable product candidate will be shortened, and our competitors may obtain approval to market competing products sooner. As a result, our revenue from applicable products could be reduced. Further, if this occurs, our competitors may take advantage of our investment in development and trials by referencing our clinical and preclinical data and launch their product earlier than might otherwise be the case, and our competitive position, business, financial condition, results of operations, and prospects could be materially harmed.

Third parties may assert that our employees or consultants have wrongfully used or disclosed confidential information or misappropriated trade secrets.

We employ individuals who were previously employed at universities or other biopharmaceutical companies, including our competitors or potential competitors. Although we try to ensure that our employees and consultants do not use the proprietary information or know-how of others in their work for us, we may be subject to claims that we or our employees, consultants or independent contractors have inadvertently or otherwise used or disclosed intellectual property, including trade secrets or other proprietary information, of a former employer or other third parties. We may also be subject to claims that patents and applications that we may file to protect inventions of our employees or consultants are rightfully owned by their former employers or other third parties. Litigation may be necessary to defend against these claims. If we fail in defending any such claims, in addition to paying monetary damages, we may lose valuable intellectual property rights or personnel. Even if we are successful in defending against such claims, litigation could result in substantial costs and be a distraction to management and other employees. Any of the foregoing would harm our business, financial condition, results of operations, and prospects.

Changes in U.S. patent law or the patent law of other countries or jurisdictions could diminish the value of patents in general, thereby impairing our ability to protect our products.

The U.S. has enacted and implemented wide-ranging patent reform legislation. The U.S. Supreme Court has ruled on several patent cases in recent years, either narrowing the scope of patent protection available in certain circumstances or weakening the rights of patent owners in certain situations. In addition to increasing uncertainty with regard to our ability to obtain patents in the future, this combination of events has created uncertainty with respect to the value of patents, once obtained. Depending on actions by the U.S. Congress, the federal courts and the USPTO, the laws and regulations governing patents could change in unpredictable ways that would weaken our ability to obtain new patents or to enforce patents that we have licensed or that we might obtain in the future. Similarly, changes in patent law and regulations in other countries or jurisdictions or changes in the governmental bodies that enforce them or changes in how the relevant governmental authority enforces patent laws or regulations may weaken our ability to obtain new patents or to enforce patents that we have licensed or that we may obtain in the future. For example, the complexity and uncertainty of European patent laws have also increased in recent years. In Europe, in June 2023, a new unitary patent system was introduced, which will significantly impact European patents, including those granted before the introduction of the system. Under the unitary patent system, after a European patent is granted, the patent proprietor can request unitary effect, thereby getting a European patent with unitary Effect (a “Unitary Patent”). Each Unitary Patent is subject to the jurisdiction of the Unitary Patent Court (“UPC”). As the UPC is a new court system, there is no precedent for the court, increasing the uncertainty of any litigation. Patents granted before the implementation of the UPC will have the option of opting out of the jurisdiction of the UPC and remaining as national patents in the UPC countries. Patents that remain under the jurisdiction of the UPC may be potentially vulnerable to a single UPC-based revocation challenge that, if successful, could invalidate the patent in all countries who are signatories to the UPC. We cannot predict with certainty the long-term effects of the new unitary patent system.

Risks Related to Other Legal Compliance Matters

If any of our product candidates are approved, an unfavorable reimbursement determination in any of the major markets could have a negative impact on us. Further, an unfavorable change in such regimes (e.g., price controls) could have a negative impact on us.

The regulations that govern marketing approvals, pricing, and reimbursement for new medicines vary widely from country to country. In the U.S., recently enacted legislation may significantly change the approval requirements in ways that could involve additional costs and cause delays in obtaining approvals. Some countries require approval of the sale price of a medicine before it can be marketed. In many countries, the pricing review period begins after marketing or product licensing approval is granted. In some foreign markets, prescription pharmaceutical pricing remains subject to continuing governmental control even after initial approval is granted. As a result, we might obtain marketing approval for a medicine in a particular country, but then be subject to price regulations that delay our commercial launch of the medicine, possibly for lengthy time periods, and negatively impact the revenues we are able to generate from the sale of the medicine in that country. Adverse pricing limitations may hinder our ability to recoup our investment in one or more product candidates, even if any product candidates we may develop obtain marketing approval.

Our ability to commercialize any medicines successfully also will depend in part on the extent to which reimbursement for these medicines and related treatments will be available from government health administration authorities, private health insurers, and other organizations. Government authorities and third-party payors, such as private health insurers and health maintenance organizations, decide which medications they will pay for and establish reimbursement levels. A primary trend in the U.S. healthcare industry and elsewhere is cost containment. Government authorities and third-party payors have attempted to control costs by limiting coverage and the amount of reimbursement for particular medications. For example, in May 2019, the Centers for Medicare & Medicaid Services (“CMS”) issued a final rule to allow Medicare Advantage Plans the option of using step therapy, a type of prior authorization for Medicare Party B drugs, beginning January 1, 2020. This final rule codified CMS’s policy change that was effective January 1, 2019.

Congress and the Biden administration have each indicated that it will continue to seek new legislative and/or administrative measures to control drug costs. Individual states in the U.S. have also increasingly passed legislation and implemented regulations designed to control pharmaceutical product pricing, including price or patient reimbursement constraints, discounts, restrictions on certain product access and marketing cost disclosure and transparency measures, and, in some cases, designed to encourage importation from other countries and bulk purchasing. See the discussion below under the heading “The prices of prescription pharmaceuticals in the United States and foreign jurisdictions are subject to considerable legislative and executive actions and could impact the prices we obtain for our products, if and when licensed” for additional detail.  

At the state level, legislatures have become increasingly aggressive in passing legislation and implementing regulations designed to control pharmaceutical and biological product pricing. Some of these measures include price or patient reimbursement constraints, discounts, restrictions on certain product access, marketing cost disclosure and transparency measures, and, in some cases, measures designed to encourage importation from other countries and bulk purchasing. In addition, regional health care authorities and individual hospitals are increasingly using bidding procedures to determine what pharmaceutical products and which suppliers will be included in their prescription drug and other health care programs. Also, increasingly, third-party payors are requiring that drug companies provide them with predetermined discounts from list prices and are challenging the prices charged for medical products. We cannot be sure that reimbursement will be available for any medicine that we commercialize and, if reimbursement is available, the level of reimbursement. Reimbursement may impact the demand for, or the price of, any product candidate for which we obtain marketing approval. If reimbursement is not available or is available only to limited levels, we may not be able to successfully commercialize any product candidate for which we obtain marketing approval.

There may be significant delays in obtaining reimbursement for newly approved medicines, and coverage may be more limited than the purposes for which the medicine is approved by the FDA or similar regulatory authorities outside the U.S. Moreover, eligibility for reimbursement does not imply that any medicine will be paid for in all cases or at a rate that covers our costs, including research, development, manufacture, sale and distribution. Interim reimbursement levels for new medicines, if applicable, may also not be sufficient to cover our costs and may not be made permanent. Reimbursement rates may vary according to the use of the medicine and the clinical setting in which it is used, may be based on reimbursement levels already set for lower cost medicines and may be incorporated into existing payments for other services. Net prices for medicines may be reduced by mandatory discounts or rebates required by government healthcare programs or private payors and by any future relaxation of laws that presently restrict imports of medicines from countries where they may be sold at lower prices than in the U.S. Any such reductions could negatively impact our net product sales, if any of our product candidates are ever approved.

Any product candidate for which we obtain marketing approval could be subject to restrictions or withdrawal from the market, and we may be subject to substantial penalties if we fail to comply with regulatory requirements or if we experience unanticipated problems with our medicines, when and if any of them are approved.

The FDA and other regulatory agencies closely regulate the post approval marketing and promotion of medicines to ensure that they are marketed only for the approved indications and in accordance with the provisions of the approved labeling. The FDA and other regulatory agencies impose stringent restrictions on manufacturers’ communications regarding off label use, and if we do not market our medicines for their approved indications, we may be subject to enforcement action for off label marketing by the FDA and other federal and state enforcement agencies, including the Department of Justice. Violation of the Federal Food, Drug, and Cosmetic Act and other statutes, including the False Claims Act, relating to the promotion and advertising of prescription products may also lead to investigations or allegations of violations of federal and state healthcare fraud and abuse laws and state consumer protection laws.

In addition, later discovery of previously unknown problems with our medicines, third-party manufacturers, or manufacturing processes, or failure to comply with regulatory requirements, may yield various results, including:

Any government investigation of alleged violations of law could require us to expend significant time and resources in response and could generate negative publicity. The occurrence of any event or penalty described above may inhibit our ability to commercialize any product candidates we develop and adversely affect our business, financial condition, results of operations, and prospects.

Additionally, if any of our product candidates receives marketing approval, the FDA could require it to adopt a Risk Evaluation and Mitigation Strategy, to ensure that the benefits outweigh its risks, which may include, among other things, a medication guide outlining the risks of the product for distribution to patients and a communication plan to healthcare practitioners. Furthermore, if we or others later identify undesirable side effects caused by any of our product candidates, several potentially significant negative consequences could result, including:

Our relationships with healthcare providers, including physicians, and third-party payors will be subject to applicable anti-kickback, fraud and abuse, anti-bribery and other healthcare laws and regulations, which could expose us to criminal sanctions, civil penalties, contractual damages, reputational harm and diminished profits and future earnings.

Healthcare providers and third-party payors play a primary role in the recommendation and prescription of any product candidates for which we obtain marketing approval. Our current and future arrangements with healthcare providers, third-party payors and customers may expose us to broadly applicable fraud and abuse and other healthcare laws and regulations that may constrain the business or financial arrangements and relationships through which we research as well as market, sell and distribute our products for which we obtain marketing approval. Restrictions under applicable federal and state healthcare laws and regulations, including certain laws and regulations applicable only if we have marketed products, include, but are not limited to, the following:

Some state laws also require pharmaceutical companies to comply with specific compliance standards, restrict financial interactions between pharmaceutical companies and healthcare providers or require pharmaceutical companies to report information related to payments to health care providers or marketing expenditures. Certain state laws also require the reporting of information related to drug pricing. Further, certain state and local laws require the registration of pharmaceutical sales representatives.

Efforts to ensure that our business arrangements with third parties will comply with applicable healthcare laws and regulations will involve substantial costs. Given the breadth of the laws and regulations and evolving government interpretations of the laws and regulations, governmental authorities may possibly conclude that our business practices, including certain of our advisory board arrangements with physicians, some of whom are compensated in the form of stock or stock options, may not comply with healthcare laws and regulations. If our operations are found to be in violation of any of the laws described above or any other government regulations that apply to us, we may be subject to significant penalties, including administrative, civil and criminal penalties, damages, fines, disgorgement, exclusion from participation in government health care programs, such as Medicare and Medicaid, imprisonment, integrity oversight and reporting obligations, contractual damages, reputational harm, diminished profits and future earnings, and the curtailment or restructuring of our operations, any of which could adversely affect our business, financial condition, results of operations, and prospects.

The European Union has strict laws governing the provision of benefits or advantages to healthcare professionals in order to induce or encourage the prescription, recommendation, endorsement, purchase, supply, order or use of medicinal products. Such laws and associated codes of practice set out the rules and requirements that the provision of hospitality, sponsorship, gifts and promotional items must meet before they can be accepted by healthcare professionals. The provision of benefits or advantages to healthcare professionals is also governed by the national anti-bribery laws of European Union Member States. Infringement of these laws could result in substantial fines and imprisonment.

Payments made to healthcare professionals in certain European Union Member States may be publicly disclosed. Moreover, agreements with healthcare professionals often must be the subject of prior notification and approval by the healthcare professionals’ employer, his or her competent professional organization, and/or the regulatory authorities of the individual European Union Member States. These requirements are provided in the national laws, industry codes, or professional codes of conduct applicable in the European Union Member States. Failure to comply with these requirements could result in reputational risk, public reprimands, administrative penalties, fines or imprisonment.

Healthcare and other reform legislation, may increase the difficulty and cost for us and any collaborators we may have to obtain marketing approval of and commercialize briquilimab and any other product candidates we may develop and affect the prices we, or they, may obtain.

In the United States and some foreign jurisdictions, there have been, and continue to be, ongoing efforts to implement legislative and regulatory changes regarding the healthcare system. Such changes could prevent or delay marketing approval of briquilimab and any other product candidates that we may develop, restrict or regulate post-approval activities and affect our ability to profitably sell any product candidates for which we obtain marketing approval. Although we cannot predict what healthcare or other reform efforts will be successful, such efforts may result in more rigorous coverage criteria, in additional downward pressure on the price that we, or our future collaborators, may receive for any approved products or in other consequences that may adversely affect our ability to achieve or maintain profitability.

Within the United States, the federal government and individual states have aggressively pursued healthcare reform, as evidenced by the passing of the ACA and the ongoing efforts to modify or repeal that legislation. The ACA substantially changed the way healthcare is financed by both governmental and private insurers and contains a number of provisions that affect coverage and reimbursement of drug products and/or that could potentially reduce the demand for pharmaceutical products such as increasing drug rebates under state Medicaid programs for brand name prescription drugs and extending those rebates to Medicaid managed care and assessing a fee on manufacturers and importers of brand name prescription drugs reimbursed under certain government programs, including Medicare and Medicaid. Other aspects of healthcare reform, such as expanded government enforcement authority and heightened standards that could increase compliance-related costs, could also affect our business. There are, and may continue to be, judicial challenges, including review by the United States Supreme Court. We cannot predict the ultimate content, timing or effect of any changes to the ACA or other federal and state reform efforts. There is no assurance that federal or state healthcare reform will not adversely affect our future business and financial results, and we cannot predict how future federal or state legislative, judicial or administrative changes relating to healthcare reform will affect our business.

Federal and state governments have shown significant interest in implementing cost-containment programs to limit the growth of government-paid healthcare costs, including price controls, waivers from Medicaid drug rebate law requirements, restrictions on reimbursement and requirements for substitution of generic products for branded prescription drugs. The private sector has also sought to control healthcare costs by limiting coverage or reimbursement or requiring discounts and rebates on products. We are unable to predict what additional legislation, regulations or policies, if any, relating to the healthcare industry or third party coverage and reimbursement may be enacted in the future or what effect such legislation, regulations or policies would have on our business. Any cost containment measures could significantly decrease the available coverage and the price we might establish for our potential products, which would have an adverse effect on our net revenues and operating results.

Legislative and regulatory proposals have been made to expand post-approval requirements and restrict sales and promotional activities for biotechnology products. We cannot be sure whether additional legislative changes will be enacted, or whether FDA regulations, guidance or interpretations for biological products will be changed, or what the impact of such changes on the marketing approvals of our product candidates, if any, may be. In addition, increased scrutiny by the U.S. Congress of the FDA’s approval and decision-making processes may significantly delay or prevent marketing approval, as well as subject us to more stringent product labeling and post-marketing testing and other requirements.

The prices of prescription pharmaceuticals in the United States and foreign jurisdictions are subject to considerable legislative and executive actions and could impact the prices we obtain for our products, if and when licensed.

The prices of prescription pharmaceuticals have also been the subject of considerable discussion in the United States. To date, there have been several recent U.S. congressional inquiries and proposed and enacted state and federal legislation designed to, among other things, bring more transparency to drug pricing, review the relationship between pricing and manufacturer patient programs, reduce the costs of drugs under Medicare and reform government program reimbursement methodologies for products. To those ends, in October 2020, the FDA issued final guidance that describes procedures drug manufacturers can follow to facilitate importation of prescription drugs, including biological products, that are FDA-approved, manufactured abroad, authorized for sale in any foreign country, and originally intended for sale in that foreign country.

At the state level, individual states are increasingly aggressive in passing legislation and implementing regulations designed to control pharmaceutical and biological product pricing, including price or patient reimbursement constraints, discounts, restrictions on certain product access and marketing cost disclosure and transparency measures, and, in some cases, designed to encourage importation from other countries and bulk purchasing. In addition, regional health care organizations and individual hospitals are increasingly using bidding procedures to determine what pharmaceutical products and which suppliers will be included in their prescription drug and other health care programs. These measures could reduce the ultimate demand for our products, once approved, or put pressure on our product pricing. We expect that additional state and federal healthcare reform measures will be adopted in the future, any of which could limit the amounts that federal and state governments will pay for healthcare products and services, which could result in reduced demand for our product candidates or additional pricing pressures.

In the European Union, similar political, economic and regulatory developments may affect our ability to profitably commercialize our product candidates, if approved. In markets outside of the United States and the European Union, reimbursement and healthcare payment systems vary significantly by country, and many countries have instituted price ceilings on specific products and therapies. In some countries, particularly the countries of the European Union, the pricing of prescription pharmaceuticals is subject to governmental control. In these countries, pricing negotiations with governmental authorities can take considerable time after the receipt of marketing approval for a product. To obtain reimbursement or pricing approval in some countries, we may be required to conduct a clinical trial that compares the cost-effectiveness of our product candidates to other available therapies. If reimbursement of our products is unavailable or limited in scope or amount, or if pricing is set at unsatisfactory levels, our business could be harmed, possibly materially.

In addition, on August 16, 2022, President Biden signed into law the Inflation Reduction Act of 2022, which, among other things, includes policies that are designed to have a direct impact on drug prices and reduce drug spending by the federal government, took effect in 2023. Under the Inflation Reduction Act of 2022, Congress authorized Medicare beginning in 2026 to negotiate lower prices for certain costly single-source drug and biologic products that do not have competing generics or biosimilars. This provision is limited in terms of the number of pharmaceuticals whose prices can be negotiated in any given year and it only applies to drug products that have been approved for at least 9 years and biologics that have been licensed for 13 years. Drugs and biologics that have been approved for a single rare disease or condition are categorically excluded from price negotiation. Further, the new legislation provides that if pharmaceutical companies raise prices in Medicare faster than the rate of inflation, they must pay rebates back to the government for the difference. The new law also caps Medicare out-of-pocket drug costs at an estimated $4,000 a year in 2024 and, thereafter beginning in 2025, at $2,000 a year.

Our employees, principal investigators, consultants and commercial partners may engage in misconduct or other improper activities, including non-compliance with regulatory standards and requirements and insider trading.

We are exposed to the risk of fraud or other misconduct by our employees, consultants and commercial partners, and, if we commence clinical trials, our principal investigators. Misconduct by these parties could include intentional failures to comply with FDA regulations or the regulations applicable in the European Union and other jurisdictions, provide accurate information to the FDA, the EMA and other regulatory authorities, comply with healthcare fraud and abuse laws and regulations in the United States and abroad, report financial information or data accurately or disclose unauthorized activities to us. In particular, sales, marketing and business arrangements in the healthcare industry are subject to extensive laws and regulations intended to prevent fraud, misconduct, kickbacks, self-dealing and other abusive practices. These laws and regulations restrict or prohibit a wide range of pricing, discounting, marketing and promotion, sales commission, customer incentive programs and other business arrangements. Such misconduct also could involve the improper use of information obtained in the course of clinical trials or interactions with the FDA, the EMA or other regulatory authorities, which could result in regulatory sanctions and cause serious harm to our reputation. We have adopted a code of conduct applicable to all of our employees, but it is not always possible to identify and deter employee misconduct, and the precautions we take to detect and prevent this activity may not be effective in controlling unknown or unmanaged risks or losses or in protecting us from government investigations or other actions or lawsuits stemming from a failure to comply with these laws or regulations. If any such actions are instituted against us, and we are not successful in defending ourselves or asserting our rights, those actions could have a significant impact on our business, financial condition, results of operations and prospects, including the imposition of significant fines or other sanctions.

Laws and regulations governing any international operations we may have in the future may preclude us from developing, manufacturing and selling certain product candidates outside of the United States and require us to develop and implement costly compliance programs.

We may be subject to numerous laws and regulations in each jurisdiction outside of the United States in which we may operate. The creation, implementation and maintenance of international business practices compliance programs is costly and such programs are difficult to enforce, particularly where reliance on third parties is required.

The Foreign Corrupt Practices Act (the “FCPA”), prohibits any U.S. individual or business from paying, offering, authorizing payment or offering of anything of value, directly or indirectly, to any foreign official, political party or candidate for the purpose of influencing any act or decision of the foreign entity in order to assist the individual or business in obtaining or retaining business. The FCPA also obligates companies whose securities are listed in the United States to comply with certain accounting provisions requiring us to maintain books and records that accurately and fairly reflect all transactions of the corporation, including international subsidiaries, and to devise and maintain an adequate system of internal accounting controls for international operations. The anti-bribery provisions of the FCPA are enforced primarily by the Department of Justice. The SEC is involved with enforcement of the books and records provisions of the FCPA.

Similarly, the U.K. Bribery Act 2010 has extra-territorial effect for companies and individuals having a connection with the United Kingdom. The U.K. Bribery Act prohibits inducements both to public officials and private individuals and organizations. Compliance with the FCPA and the U.K. Bribery Act is expensive and difficult, particularly in countries in which corruption is a recognized problem. In addition, the FCPA presents particular challenges in the pharmaceutical industry, because, in many countries, hospitals are operated by the government, and doctors and other hospital employees are considered foreign officials. Certain payments to hospitals in connection with clinical trials and other work have been deemed to be improper payments to government officials and have led to FCPA enforcement actions.

Various laws, regulations and executive orders also restrict the use and dissemination outside of the United States, or the sharing with certain non-U.S. nationals, of information classified for national security purposes, as well as certain products and technical data relating to those products. Our expansion outside of the United States has required, and will continue to require, us to dedicate additional resources to comply with these laws, and these laws may preclude us from developing, manufacturing or selling certain product candidates outside of the United States, which could limit our growth potential and increase our development costs. The failure to comply with laws governing international business practices may result in substantial penalties, including suspension or debarment from government contracting. Violation of the FCPA can result in significant civil and criminal penalties. Indictment alone under the FCPA can lead to suspension of the right to do business with the U.S. government until the pending claims are resolved. Conviction of a violation of the FCPA can result in long-term disqualification as a government contractor. The termination of a government contract or relationship as a result of our failure to satisfy any of our obligations under laws governing international business practices would have a negative impact on our operations and harm our reputation and ability to procure government contracts. The SEC also may suspend or bar issuers from trading securities on U.S. exchanges for violations of the FCPA’s accounting provisions.

Compliance with global privacy and data security requirements could result in additional costs and liabilities to us or inhibit our ability to collect and process data globally, and the failure to comply with such requirements could subject us to significant fines and penalties, which may have a material adverse effect on our business, financial condition and results of operations.

The regulatory framework for the collection, use, safeguarding, sharing, transfer, and other processing of information worldwide is rapidly evolving and is likely to remain uncertain for the foreseeable future. Globally, virtually every jurisdiction in which we operate has established its own data security and privacy frameworks with which we must comply. For example, the collection, use, disclosure, transfer, or other processing of personal data regarding individuals in the European Union, including personal health data, is subject to the EU General Data Protection Regulation (the “GDPR”), which took effect across all member states of the European Economic Area (the “EEA”) in May 2018. The GDPR is wide-ranging in scope and imposes numerous requirements on companies that process personal data, including requirements relating to processing health and other sensitive data, obtaining consent of the individuals to whom the personal data relates, providing information to individuals regarding data processing activities, implementing safeguards to protect the security and confidentiality of personal data, providing notification of data breaches, and taking certain measures when engaging third-party processors. The GDPR increases our obligations with respect to clinical trials conducted in the EEA by expanding the definition of personal data to include coded data and requiring changes to informed consent practices and more detailed notices for clinical trial subjects and investigators. In addition, the GDPR imposes strict rules on the transfer of personal data to countries outside the European Union, including the United States, and, as a result, increases the scrutiny that clinical trial sites located in the EEA should apply to transfers of personal data from such sites to countries that are considered to lack an adequate level of data protection, such as the United States. The GDPR also permits data protection authorities to require destruction of improperly gathered or used personal information and/or impose substantial fines for violations of the GDPR, which can be up to four percent of global revenues or 20 million Euros, whichever is greater, and it also confers a private right of action on data subjects and consumer associations to lodge complaints with supervisory authorities, seek judicial remedies, and obtain compensation for damages resulting from violations of the GDPR. In addition, the GDPR provides that European Union member states may make their own further laws and regulations limiting the processing of personal data, including genetic, biometric or health data.

Further, Brexit has led and could also lead to legislative and regulatory changes and may increase our compliance costs. As of January 1, 2021 and the expiry of transitional arrangements agreed to between the United Kingdom and the European Union, data processing in the United Kingdom is governed by a United Kingdom version of the GDPR (combining the GDPR and the Data Protection Act 2018), exposing us to two parallel regimes, each of which authorizes similar fines and other potentially divergent enforcement actions for certain violations. On June 28, 2021, the European Commission adopted an Adequacy Decision for the United Kingdom, allowing for the relatively free exchange of personal information between the European Union and the United Kingdom, however, the European Commission may suspend the Adequacy Decision if it considers that the United Kingdom no longer provides for an adequate level of data protection. Other jurisdictions outside the European Union are similarly introducing or enhancing privacy and data security laws, rules and regulations.

Similar actions are either in place or under way in the United States. There are a broad variety of data protection laws that are applicable to our activities, and a wide range of enforcement agencies at both the state and federal levels that can review companies for privacy and data security concerns based on general consumer protection laws. The Federal Trade Commission and state Attorneys General all are aggressive in reviewing privacy and data security protections for consumers. New laws also are being considered at both the state and federal levels. For example, the California Consumer Privacy Act — which went into effect on January 1, 2020 — is creating similar risks and obligations as those created by the GDPR, though the California Consumer Privacy Act does exempt certain information collected as part of a clinical trial subject to the Federal Policy for the Protection of Human Subjects (the Common Rule). As of January 1, 2023, the California Consumer Privacy Act (as amended by the California Privacy Rights Act) is in full effect, while enforcement by California’s dedicated privacy enforcement agency began in 2023. While California was first among the states in adopting comprehensive data privacy legislation similar to the GDPR, many other states are following suit. For example, Utah, Colorado, and Connecticut passed similar laws which took effect in 2023. Additionally, Delaware, Indiana, Iowa, Montana, Oregon, Tennessee and Texas also adopted privacy laws, which take effect from July 1, 2024 through 2026. Further, Washington’s My Health My Data Act, taking effect July 1, 2024, imposes similar requirements specific to consumer health data. Many other states are considering similar legislation. A broad range of legislative measures also have been introduced at the federal level. Accordingly, failure to comply with federal and state laws (both those currently in effect and future legislation) regarding privacy and security of personal information could expose us to fines and penalties under such laws. There also is the threat of consumer class actions related to these laws and the overall protection of personal data. This is particularly true with respect to data security incidents, and sensitive personal information, including health and biometric data. Even if we are not determined to have violated these laws, government investigations into these issues typically require the expenditure of significant resources and generate negative publicity, which could harm our reputation and business.

Given the breadth and depth of changes in data protection obligations, preparing for and complying with these requirements is rigorous and time intensive and requires significant resources and a review of our technologies, systems and practices, as well as those of any third-party collaborators, service providers, contractors or consultants that process or transfer personal data collected in the European Union. The GDPR, new state privacy laws and other changes in laws or regulations associated with the enhanced protection of certain types of sensitive data, such as healthcare data or other personal information from our clinical trials, could require us to change our business practices and put in place additional compliance mechanisms, may interrupt or delay our development, regulatory and commercialization activities and increase our cost of doing business, and could lead to government enforcement actions, private litigation and significant fines and penalties against us and could have a material adverse effect on our business, financial condition and results of operations.

We and our partners may be subject to stringent privacy laws, information security laws, regulations, policies and contractual obligations related to data privacy and security, and changes in such laws, regulations, policies or how they are interpreted or changes in contractual obligations could adversely affect our business.

There are numerous U.S. federal and state data privacy and protection laws and regulations that apply to the collection, transmission, processing, storage and use of personally-identifying information, which among other things, impose certain requirements relating to the privacy, security and transmission of personal information. The legislative and regulatory landscape for privacy and data protection continues to evolve in jurisdictions worldwide, and there has been an increasing focus on privacy and data protection issues with the potential to affect our business. Failure to comply with any of these laws and regulations could result in enforcement action against us, including fines, imprisonment of company officials and public censure, claims for damages by affected individuals, damage to our reputation and loss of goodwill, any of which could have a material adverse effect on our business, financial condition, results of operations or prospects.

If we are unable to properly protect the privacy and security of health-related information or other sensitive or confidential information in our possession, we could be found to have breached our contracts. Further, if we fail to comply with applicable privacy laws, including applicable HIPAA privacy and security standards, we could face significant administrative, civil and criminal penalties. Enforcement activity can also result in financial liability and reputational harm, and responses to such enforcement activity can consume significant internal resources. In addition, state attorneys general are authorized to bring civil actions seeking either injunctions or damages in response to violations that threaten the privacy of state residents.

Investors’ expectations of our performance relating to environmental, social and governance factors may impose additional costs and expose us to new risks.

There is an increasing focus from certain investors, employees, regulators and other stakeholders concerning corporate responsibility, specifically related to environmental, social and governance (“ESG”) factors. Some investors and investor advocacy groups may use these factors to guide investment strategies and, in some cases, investors may choose not to invest in our company if they believe our policies relating to corporate responsibility are inadequate. Third-party providers of corporate responsibility ratings and reports on companies have increased to meet growing investor demand for measurement of corporate responsibility performance, and a variety of organizations currently measure the performance of companies on such ESG topics, and the results of these assessments are widely publicized. Investors, particularly institutional investors, use these ratings to benchmark companies against their peers and if we are perceived as lagging with respect to ESG initiatives, certain investors may engage with us to improve ESG disclosures or performance and may also make voting decisions, or take other actions, to hold us and our board of directors accountable. In addition, the criteria by which our corporate responsibility practices are assessed may change, which could result in greater expectations of us and cause us to undertake costly initiatives to satisfy such new criteria. If we elect not to or are unable to satisfy such new criteria, investors may conclude that our policies with respect to corporate responsibility are inadequate.

We may face reputational damage in the event our corporate responsibility initiatives or objectives do not meet the standards set by our investors, stockholders, lawmakers, listing exchanges or other constituencies, or if we are unable to achieve an acceptable ESG or sustainability rating from third-party rating services. A low ESG or sustainability rating by a third-party rating service could also result in the exclusion of our common stock from consideration by certain investors who may elect to invest with our competition instead. Ongoing focus on corporate responsibility matters by investors and other parties as described above may impose additional costs or expose us to new risks. Any failure or perceived failure by us in this regard could have a material adverse effect on our reputation and on our business, share price, financial condition, or results of operations, including the sustainability of our business over time.

In addition, the SEC has announced proposed rules that, among other matters, will establish a framework for reporting of climate-related risks. To the extent the proposed rules impose additional reporting obligations, we could face increased costs. Separately, the SEC has also announced that it is scrutinizing existing climate-change related disclosures in public filings, increasing the potential for enforcement if the SEC were to allege our existing climate disclosures are misleading or deficient.

Risks Related to Employee Matters, Managing Growth and Information Technology

If we lose key management personnel, or if we fail to recruit additional highly skilled personnel, our ability to continue developing and to identify and develop new or next-generation product candidates will be impaired, which could result in delays in the development process, loss of market opportunities, make us less competitive and have a material adverse effect on our business, financial condition and results of operations.

Our ability to compete in the highly competitive biotechnology and pharmaceutical industries depends upon our ability to attract and retain highly qualified managerial, scientific and medical personnel. We are highly dependent on our management, particularly our Chief Executive Officer, the members of our executive team, and key scientific and medical personnel employees. The loss of the services of any of our executive officers, key employees, and scientific and medical advisors, and our inability to find suitable replacements, could result in delays in product development and harm our business.

We conduct our operations at our facility in the San Francisco Bay Area. This region is headquarters to many other biopharmaceutical companies and many academic and research institutions. Competition for skilled personnel in our market is intense and may limit our ability to hire and retain highly qualified personnel on acceptable terms or at all. In addition, regulation or legislation impacting the workforce, such as the proposed rule published by the Federal Trade Commission which would, if issued, generally prevent employers from entering into non-compete with employees and require employers to rescind existing non-competes, may lead to increased uncertainty in hiring and competition for talent.

To induce valuable employees to remain at our company, in addition to salary and cash incentives, we have provided stock options that vest over time. The value to employees of stock options that vest over time may be significantly affected by movements in our stock price that are beyond our control, and may at any time be insufficient to counteract more lucrative offers from other companies. Despite our efforts to retain valuable employees, members of our management, scientific and development teams may terminate their employment with us on short notice. In addition, we may experience employee turnover either as a result of the ongoing “great resignation” occurring throughout the U.S. economy or as a result of return to work policies or transitions away from remote work, which have impacted job market dynamics. New hires require training and take time before they achieve full productivity. New employees may not become as productive as we expect, and we may be unable to hire or retain sufficient numbers of qualified individuals. Although we have employment agreements with our key employees, these agreements provide for at-will employment, which means that any of our employees could leave our employment at any time, with or without notice. We do not maintain “key man” insurance policies on the lives of these individuals or the lives of any of our other employees. Our success also depends on our ability to continue to attract, retain and motivate highly skilled junior, mid-level and senior managers as well as junior, mid-level and senior scientific and medical personnel.

We and our management have a limited track record as an operating company. Failures in the operational execution of the expected business plans may have a material impact on our commercial prospects. Further, if we are not able to attract and retain highly-qualified personnel, we may not be able to successfully implement our business strategy.

Our management team has worked together for only a limited period of time and has a limited track record of executing our business plan as a team. In addition, we have recently filled a number of positions in our finance and accounting staff.  Accordingly, certain key personnel have only recently assumed the duties and responsibilities they are now performing, and it is difficult to predict whether our management team, individually and collectively, will be effective in operating our business. These changes may cause speculation and uncertainty regarding our commercial prospects and may cause or result in:

If we are unable to mitigate these risks or to attract and retain highly qualified personnel, our revenue, operating results and financial condition may be adversely impacted.

We will need to grow the size of our organization, and we may experience difficulties in managing this growth.

As of December 31, 2023, we had 45 full-time employees. As our development, manufacturing and commercialization plans and strategies develop and we continue our operations as a public company, we expect to need and are actively recruiting additional managerial, operational, sales, marketing, financial and other personnel. Future growth would impose significant added responsibilities on members of management, including:

Our future financial performance and our ability to commercialize our product candidates will depend, in part, on our ability to effectively manage any future growth, and our management may also have to divert a disproportionate amount of time to managing these growth activities.

We currently rely, and for the foreseeable future will continue to rely, in substantial part on certain independent organizations, advisors and consultants to provide certain services, including substantially all aspects of regulatory approval, clinical management and manufacturing. We cannot assure you that the services of independent organizations, advisors and consultants will continue to be available to us on a timely basis when needed, or that we can find qualified replacements. In addition, if we are unable to effectively manage our outsourced activities or if the quality or accuracy of the services provided by consultants is compromised for any reason, our clinical trials may be extended, delayed or terminated, and we may not be able to obtain regulatory approval of our product candidates or otherwise advance our business. We cannot assure you that we will be able to manage our existing consultants or find other competent outside contractors and consultants on economically reasonable terms, or at all. If we are not able to effectively expand our organization by hiring new employees and expanding our groups of consultants and contractors, or if we are not able to effectively build out new facilities to accommodate this expansion, we may not be able to successfully implement the tasks necessary for further development and commercialization of our product candidates and, accordingly, may not achieve our research, development and commercialization goals.

Our insurance policies may be inadequate and potentially expose us to unrecoverable risks.

We have limited director and officer insurance and commercial insurance policies. Any significant insurance claims would have a material adverse effect on our business, financial condition and results of operations. Insurance availability, coverage terms and pricing continue to vary with market conditions. We endeavor to obtain appropriate insurance coverage for insurable risks that we identify; however, we may fail to correctly anticipate or quantify insurable risks; we may not be able to obtain appropriate insurance coverage; and insurers may not respond as we intend to cover insurable events that may occur. We have observed rapidly changing conditions in the insurance markets relating to nearly all areas of traditional corporate insurance. Such conditions have resulted in higher premium costs, higher policy deductibles and lower coverage limits. For some risks, we may not have or maintain insurance coverage because of cost or availability.

Our internal computer systems, or those of our third-party vendors, collaborators or other contractors or consultants, may fail or suffer security breaches, which could result in a material disruption of our product development programs, compromise sensitive information related to our business or prevent us from accessing critical information, potentially exposing us to liability or otherwise adversely affecting our business.

Our internal computer systems and those of our current and any future third-party vendors, collaborators and other contractors or consultants are vulnerable to damage or interruption from computer viruses, computer hackers, malicious code, employee theft or misuse, denial-of-service attacks, sophisticated nation-state and nation-state-supported actors, unauthorized access, natural disasters, terrorism, war and telecommunication and electrical failures. While we seek to protect our information technology systems from system failure, accident and security breach, if such an event were to occur and cause interruptions in our operations, it could result in a disruption of our development programs and our business operations, whether due to a loss of our trade secrets or other proprietary information or other disruptions. For example, the loss of clinical trial data from future clinical trials could result in delays in our regulatory approval efforts and significantly increase our costs to recover or reproduce the data. We have experienced cybersecurity incidents and expect that we will continue to be subject to cybersecurity attacks in the future. If we were to experience a significant cybersecurity breach of our information systems or data, the costs associated with the investigation, remediation and potential notification of the breach to counter-parties and data subjects could be material. In addition, our remediation efforts may not be successful. If we do not allocate and effectively manage the resources necessary to build and sustain the proper technology and cybersecurity infrastructure, we could suffer significant business disruption, including transaction errors, supply chain or manufacturing interruptions, processing inefficiencies, data loss or the loss of or damage to intellectual property or other proprietary information.

Although we take such steps to help protect confidential and other sensitive information from unauthorized access or disclosure, our information technology and infrastructure may be vulnerable to attacks by hackers or viruses, failures, or breaches due to third-party action, employee negligence or error, malfeasance, or other incidents or disruptions. For example, we could be the target of phishing attacks seeking confidential information regarding our employees. Furthermore, while we have implemented data privacy and security measures in an effort to comply with applicable laws and regulations relating to privacy and data protection, some health-related and other personal information or confidential information may be transmitted to us by third parties, who may not implement adequate security and privacy measures, and it is possible that laws, rules and regulations relating to privacy, data protection, or information security may be interpreted and applied in a manner that is inconsistent with our practices or those of third parties who transmit health-related and other personal information or confidential information to us.

To the extent that we or these third parties are found to have violated such laws, rules or regulations or that any disruption or security breach were to result in a loss of, or damage to, us or our third-party vendors’, collaborators’ or other contractors’ or consultants’ data or applications, or inappropriate disclosure of confidential or proprietary information, we could incur liability including litigation exposure, penalties and fines, we could become the subject of regulatory action or investigation, our competitive position could be harmed and the further development and commercialization of our product candidates could be delayed. Any of the above could have a material adverse effect on our business, financial condition, results of operations or prospects.

Unstable market and economic conditions may have serious adverse consequences on our business, financial condition and share price.

As widely reported, global credit and financial markets have experienced volatility and disruptions in the past several years and especially in 2020, 2021 and 2022 due to the impacts of the COVID-19 pandemic, and, more recently, the Israel-Hamas war, the ongoing conflict between Ukraine and Russia and the global impact of restrictions and sanctions imposed on Russia, including severely diminished liquidity and credit availability, declines in consumer confidence, declines in economic growth, increases in unemployment rates and uncertainty about economic stability. Moreover, the global impacts of the Israel-Hamas war are still unknown. There can be no assurances that further deterioration in credit and financial markets and confidence in economic conditions will not occur. For example, U.S. debt ceiling and budget deficit concerns have increased the possibility of additional credit-rating downgrades and economic slowdowns, or a recession in the United States. Although U.S. lawmakers passed legislation to raise the federal debt ceiling on multiple occasions, including a suspension of the federal debt ceiling in June 2023, ratings agencies have lowered or threatened to lower the long-term sovereign credit rating on the United States. The impact of this or any further downgrades to the U.S. government’s sovereign credit rating or its perceived creditworthiness could adversely affect the U.S. and global financial markets and economic conditions. Absent further quantitative easing by the Federal Reserve, these developments could cause interest rates and borrowing costs to rise, which may negatively impact our results of operations or financial condition. Moreover, disagreement over the federal budget has caused the U.S. federal government to shut down for periods of time. Our general business strategy may be adversely affected by any such continued adverse political conditions, economic downturn, volatile business environment or continued unpredictable and unstable market conditions. If the current equity and credit markets deteriorate, it may make any necessary debt or equity financing more difficult, more costly and more dilutive. Failure to secure any necessary financing in a timely manner and on favorable terms could have a material adverse effect on our growth strategy, financial performance and share price and could require us to delay or abandon clinical development plans.

The impact of the Russian invasion of Ukraine on the global economy, energy supplies and raw materials is uncertain, but may prove to negatively impact our business and operations.

The short and long-term implications of Russia’s invasion of Ukraine are difficult to predict at this time. We continue to monitor any adverse impact that the outbreak of war in Ukraine and the subsequent institution of sanctions against Russia by the United States and several European and Asian countries may have on the global economy in general, on our business and operations and on the businesses and operations of our suppliers and other third parties with which we conduct business. For example, the continuing conflict has resulted and may continue to result in increased inflation, escalating energy prices and constrained availability, and thus increasing costs, of raw materials. We will continue to monitor this fluid situation and develop contingency plans as necessary to address any disruptions to our business operations as they develop. To the extent the war in Ukraine may adversely affect our business as discussed above, it may also have the effect of heightening many of the other risks described herein. Such risks include, but are not limited to, adverse effects on macroeconomic conditions, including inflation; disruptions to our technology infrastructure, including through cyberattack, ransom attack, or cyber-intrusion; adverse changes in international trade policies and relations; disruptions in global supply chains; and constraints, volatility, or disruption in the capital markets, any of which could negatively affect our business and financial condition.

Adverse developments affecting the financial services industry, such as actual events or concerns involving liquidity, defaults or non-performance by financial institutions or transactional counterparties, could adversely affect our current and projected business operations and its financial condition and results of operations.

Actual events involving limited liquidity, defaults, non-performance or other adverse developments that affect financial institutions, transactional counterparties or other companies in the financial services industry or the financial services industry generally, or concerns or rumors about any events of these kinds or other similar risks, have in the past and may in the future lead to market-wide liquidity problems. For example, on March 10, 2023, Silicon Valley Bank (SVB) was closed by the California Department of Financial Protection and Innovation, which appointed the Federal Deposit Insurance Corporation (FDIC) as receiver. Similarly, on March 12, 2023, Signature Bank and Silvergate Capital Corp. were each swept into receivership. Although a statement by the Department of the Treasury, the Federal Reserve and the FDIC stated all depositors of SVB would have access to all of their money after only one business day of closure, including funds held in uninsured deposit accounts, borrowers under credit agreements, letters of credit and certain other financial instruments with SVB, Signature Bank or any other financial institution that is placed into receivership by the FDIC may be unable to access undrawn amounts thereunder. If any of our lenders or counterparties to any such instruments were to be placed into receivership, we may be unable to access such funds. In addition, counterparties to SVB credit agreements and arrangements, and third parties such as beneficiaries of letters of credit (among others), may experience direct impacts from the closure of SVB and uncertainty remains over liquidity concerns in the broader financial services industry. Similar impacts have occurred in the past, such as during the 2008-2010 financial crisis.

Although we assess our banking relationships as we believe necessary or appropriate, our access to funding sources and other credit arrangements in amounts adequate to finance or capitalize our current and projected future business operations could be significantly impaired by factors that affect us, the financial institutions with which we have credit agreements or arrangements directly, or the financial services industry or economy in general.  These factors could include, among others, events such as liquidity constraints or failures, the ability to perform obligations under various types of financial, credit or liquidity agreements or arrangements, disruptions or instability in the financial services industry or financial markets, or concerns or negative expectations about the prospects for companies in the financial services industry.  These factors could involve financial institutions or financial services industry companies with which we have financial or business relationships, but could also include factors involving financial markets or the financial services industry generally.

The results of events or concerns that involve one or more of these factors could include a variety of material and adverse impacts on our current and projected business operations and our financial condition and results of operations.  These could include, but may not be limited to, the following:

Any decline in available funding or access to our cash and liquidity resources could, among other risks, adversely impact our ability to meet our operating expenses, financial obligations or fulfill our other obligations, result in breaches of our financial and/or contractual obligations or result in violations of federal or state wage and hour laws. Any of these impacts, or any other impacts resulting from the factors described above or other related or similar factors not described above, could have material adverse impacts on our liquidity and our current and/or projected business operations and financial condition and results of operations.

In addition, any further deterioration in the macroeconomic economy or financial services industry could lead to losses or defaults by our customers or suppliers, which in turn, could have a material adverse effect on our current and/or projected business operations and results of operations and financial condition.  For example, a customer may fail to make payments when due, default under their agreements with us, become insolvent or declare bankruptcy, or a supplier may determine that it will no longer deal with us as a customer. In addition, a customer or supplier could be adversely affected by any of the liquidity or other risks that are described above as factors that could result in material adverse impacts on our company, including but not limited to delayed access or loss of access to uninsured deposits or loss of the ability to draw on existing credit facilities involving a troubled or failed financial institution. Any customer or supplier bankruptcy or insolvency, or the failure of any customer to make payments when due, or any breach or default by a customer or supplier, or the loss of any significant supplier relationships, could result in material losses to our company and may have material adverse impacts on our business.

Risks Related to Ownership of Our Common Stock and Warrants

If our operations and performance do not meet the expectations of investors or securities analysts or for other reasons, the market price of our securities may decline, and the market price of our common stock may continue to be volatile.

Any of the factors listed below could have a negative impact on your investment in our securities, and our securities may trade at prices significantly below the price you paid for them. In such circumstances, the trading price of our securities may not recover and may experience a further decline.

Factors affecting the trading price of our securities may include:

In addition, the stock market in general, Nasdaq and pharmaceutical companies in particular have experienced extreme price and volume fluctuations that have often been unrelated or disproportionate to the operating performance of these companies. The trading price of our common stock is, and is likely to continue to be, volatile. For example, from January 3, 2023 to December 31, 2023, our closing stock price ranged from $4.24 to $27.40 per share. Broad market and industry factors may negatively affect the market price of our securities, regardless of our actual operating performance. As a result of this volatility, our stockholders may not be able to sell their common stock at or above the prices at which they purchased their shares. Moreover, in the past, stockholders have initiated class action lawsuits against pharmaceutical and biotechnology companies following periods of volatility in the market prices of these companies’ stock. Such litigation, if instituted against us, could cause us to incur substantial costs and divert management’s attention and resources from our business.

Insiders have substantial control over us, which could limit your ability to affect the outcome of key transactions, including a change of control.

As of December 31, 2023, our directors and executive officers and their affiliates beneficially owned approximately 28.1% of the outstanding shares of our common stock. As a result, these stockholders, if they act together, will be able to influence our management and affairs and all matters requiring stockholder approval, including the election of directors and approval of significant corporate transactions, such as a merger or other sale of our company or our assets. This concentration of ownership may have the effect of delaying or preventing a change in control of our company or discouraging a potential acquirer from making a tender offer or otherwise attempting to obtain control, even if that change in control would benefit our other stockholders. This significant concentration of ownership may also adversely affect the trading price for our common stock because investors often perceive disadvantages in owning stock in companies with controlling stockholders.

We have incurred and will continue to incur significant increased expenses and administrative burdens as a public company, which could negatively impact our business, financial condition and results of operations.

We face increased legal, accounting, administrative and other costs and expenses as a public company. The Sarbanes-Oxley Act, including the requirements of Section 404, as well as rules and regulations subsequently implemented by the SEC, the Dodd-Frank Wall Street Reform and Consumer Protection Act of 2010 and the rules and regulations promulgated and to be promulgated thereunder, and the securities exchanges, impose additional reporting and other obligations on public companies. Compliance with public company requirements increases costs and makes certain activities more time-consuming. A number of those requirements require us to carry out activities we had not done previously. For example, we have adopted new charters for our board committees and adopted some new disclosure controls and procedures. In addition, expenses associated with SEC reporting requirements will be incurred. Furthermore, if any issues in complying with those requirements are identified (for example, if a material weakness or significant deficiency is identified in the internal control over financial reporting), we could incur additional costs rectifying those issues, and the existence of those issues could adversely affect our reputation or investor perceptions of us. It is also more expensive to obtain director and officer liability insurance. Risks associated with our status as a public company may make it more difficult to attract and retain qualified persons to serve on our board of directors or as executive officers. The additional reporting and other obligations imposed by these rules and regulations will increase legal and financial compliance costs and the costs of related legal, accounting and administrative activities. These increased costs will require us to divert a significant amount of money that could otherwise be used to expand our business and achieve strategic objectives. Advocacy efforts by stockholders and third parties may also prompt additional changes in governance and reporting requirements, which could further increase costs.

If we fail to comply with the continued listing requirements of the Nasdaq Capital Market, our common stock may be delisted and the price of our common stock and our ability to access the capital markets could be negatively impacted. 

We must continue to satisfy the Nasdaq Capital Market’s continued listing requirements, including, among other things, a minimum closing bid price requirement of $1.00 per share for 30 consecutive business days. If a company fails for 30 consecutive business days to meet the $1.00 minimum closing bid price requirement, The Nasdaq Stock Market LLC (“Nasdaq”) will send a deficiency notice to the company, advising that it has been afforded a “compliance period” of 180 calendar days to regain compliance with the applicable requirements.

A delisting of our common stock from the Nasdaq Capital Market could materially reduce the liquidity of our common stock and result in a corresponding material reduction in the price of our common stock. In addition, delisting could harm our ability to raise capital through alternative financing sources on terms acceptable to us, or at all, and may result in the potential loss of confidence by investors and employees.

On October 18, 2023, we received written notice from Nasdaq indicating that, for the last 30 consecutive business days, the bid price for our common stock had closed below the minimum $1.00 per share requirement for continued listing on the Nasdaq Capital Market under Nasdaq Listing Rule 5550(a)(2). In accordance with Nasdaq Listing Rule 5810(c)(3)(A), had been provided with an initial period of 180 calendar days, or until April 15, 2024, to regain compliance. On January 3, 2024, we filed a Certificate of Second Amendment to our Second Amended and Restated Certificate of Incorporation, as amended (the “Certificate of Amendment”), with the Secretary of State of the State of Delaware to effect a 1-for-10 reverse stock split (the “Reverse Split”) of our voting common stock. The Reverse Stock Split was effective at 12:01 a.m., Eastern Time, on January 4, 2024. The Reverse Stock Split was intended for us to regain compliance with the minimum bid price requirement of $1.00 per share of our common stock for continued listing on the Nasdaq Capital Market. On January 19, 2024, we received a letter from Nasdaq notifying us that we regained full compliance with Nasdaq Listing Rule 5550(a)(2) after the closing bid price of our common stock had been at $1.00 per share or greater for ten consecutive business days from January 4, 2024 through January 18, 2024.

Even though we have regained compliance with the Nasdaq Capital Market’s minimum closing bid price requirement, there is no guarantee that we will remain in compliance with such listing requirements or other listing requirements in the future. Any failure to maintain compliance with continued listing requirements of the Nasdaq Capital Market could result in delisting of our common stock from the Nasdaq Capital Market and negatively impact our company and holders of our common stock, including by reducing the willingness of investors to hold our common stock because of the resulting decreased price, liquidity and trading of our common stock, limited availability of price quotations and reduced news and analyst coverage. Delisting may adversely impact the perception of our financial condition, cause reputational harm with investors, our employees and parties conducting business with us and limit our access to debt and equity financing.

Our failure to timely and effectively implement controls and procedures required by Section 404(a) of the Sarbanes-Oxley Act could negatively impact our business.

Absent an applicable exemption, we are required to provide a management’s attestation on internal controls over financial reporting, and we were not previously required to do this as a private company. The standards required for a public company under Section 404(a) of the Sarbanes-Oxley Act are significantly more stringent than those required of us when we were a privately held company. Management may not be able to effectively and timely implement controls and procedures that adequately respond to the increased regulatory compliance and reporting requirements. If we are not able to implement the additional requirements of Section 404(a) in a timely manner or with adequate compliance, we may not be able to assess whether our internal controls over financial reporting are effective, which may subject us to adverse regulatory consequences and could harm investor confidence and the market price of our securities.

We are an “emerging growth company” within the meaning of the Securities Act, and if we take advantage of certain exemptions from disclosure requirements available to emerging growth companies, it could make our securities less attractive to investors and may make it more difficult to compare our performance to the performance of other public companies.

We are an “emerging growth company” as defined in Section 2(a)(19) of the U.S. Securities Act of 1933, as amended (the “Securities Act”), as modified by the JOBS Act. As such, we are eligible for and intend to take advantage of certain exemptions from various reporting requirements applicable to other public companies that are not emerging growth companies for as long as we continue to be an emerging growth company, including, but not limited to, (a) not being required to comply with the auditor attestation requirements of Section 404 of the Sarbanes-Oxley Act, (b) reduced disclosure obligations regarding executive compensation in our periodic reports and proxy statements and (c) exemptions from the requirements of holding a nonbinding advisory vote on executive compensation and stockholder approval of any golden parachute payments not previously approved. As a result, our stockholders may not have access to certain information they may deem important. We will remain an emerging growth company until the earlier of (i) the last day of the fiscal year (a) following November 22, 2024, (b) in which we have total annual gross revenue of at least $1.235 billion, or (c) in which we are deemed to be a large accelerated filer, which means the market value of our common equity that is held by non-affiliates exceeds $700 million as of the last business day of our most recently completed second fiscal quarter; and (ii) the date on which we have issued more than $1.00 billion in non-convertible debt securities during the prior three-year period. We cannot predict whether investors will find our securities less attractive because we will rely on these exemptions. If some investors find our securities less attractive as a result of our reliance on these exemptions, the trading prices of our securities may be lower than they otherwise would be; there may be a less active trading market for our securities; and the trading prices of our securities may be more volatile.

Further, Section 102(b)(1) of the JOBS Act exempts emerging growth companies from being required to comply with new or revised financial accounting standards until private companies (that is, those that have not had a Securities Act registration statement declared effective or do not have a class of securities registered under the Exchange Act) are required to comply with the new or revised financial accounting standards. The JOBS Act provides that a company can elect to opt out of the extended transition period and comply with the requirements that apply to non-emerging growth companies but any such an election to opt out is irrevocable. We have opted to take advantage of the exemption for complying with new or revised accounting standards within the same time periods as private companies, which means that when a standard is issued or revised and it has different application dates for public or private companies, we, as an emerging growth company, can adopt the new or revised standard at the time private companies adopt the new or revised standard. This may make comparison of our consolidated financial statements with another public company that is neither an emerging growth company nor an emerging growth company that has opted out of using the extended transition period difficult or impossible because of the potential differences in accounting standards used.