Our business, financial condition, operating results and cash flows can be impacted by a number of factors, including, but not limited to those set forth below, any of which could cause our results to be adversely impacted and could result in a decline in the value or loss of an investment in our common stock. Other factors may also exist that we cannot anticipate or that we currently do not consider to be significant based on information that is currently available. These risks and uncertainties have the potential to materially affect our business, financial condition, results of operations, cash flows and future results. Such risks and uncertainties also may impact the accuracy of forward-looking statements included in this Form 10-Q and other reports we file with the Securities and Exchange Commission.
We generally have no long-term contracts with our customers requiring them to purchase any specified quantities from us.
Our sales are primarily made on a purchase order basis, and we generally have no long-term purchase commitments from our customers, which is typical in the industries we serve. As a result, we are limited in our ability to predict the level of future sales or commitments from our current customers, which may diminish our ability to allocate labor, materials, and equipment in the manufacturing process effectively. In addition, we may purchase inventory in anticipation of sales that do not materialize, resulting in excess and obsolete inventory write-offs.
The industries in which we compete are subject to volatile and unpredictable cycles.
As a supplier to the global semiconductor, flat panel display, solar, industrial and related industries, we are subject to business cycles, the timing, length, and volatility of which can be difficult to predict. These industries historically have been cyclical due to sudden changes in customers’ manufacturing capacity requirements and spending, which depend in part on capacity utilization, demand for customers’ products, inventory levels relative to demand, and access to affordable capital. These changes have affected the timing and amounts of customers’ purchases and investments in technology, and continue to affect our orders, net sales, operating expenses, and net income. In addition, we may not be able to respond adequately or quickly to the declines in demand by reducing our costs. We may be required to record significant reserves for excess and obsolete inventory as demand for our products changes.
To meet rapidly changing demand in each of the industries we serve, we must effectively manage our resources and production capacity. During periods of decreasing demand for our products, we must be able to appropriately align our cost structure with prevailing market conditions, effectively manage our supply chain, and motivate and retain key employees. During periods of increasing demand, we must have sufficient manufacturing capacity and inventory to fulfill customer orders, effectively manage our supply chain, and attract, retain, and motivate a sufficient number of qualified individuals. If we are not able to timely and appropriately adapt to changes in our business environment or to accurately assess where we are positioned within a business cycle, our business, financial condition, or results of operations may be materially and adversely affected.
Cyclicality in the semiconductor equipment industry impacts our results of operations.
Our business is affected by the capital equipment expenditures of semiconductor manufacturers, which in turn is affected by the current and anticipated market demand for integrated circuits and products using integrated circuits. The semiconductor industry is cyclical in nature and has experienced periodic and severe downturns and upturns. Business conditions, therefore, historically have changed rapidly and unpredictably.
Fluctuating levels of investment by semiconductor manufacturers could continue to materially affect our revenues and operating results. Where appropriate, we will attempt to respond to these fluctuations with cost management programs aimed at aligning our expenditures with anticipated revenue streams, which sometimes result in restructuring charges. Even during periods of reduced revenues, we must continue to invest in research and development and maintain extensive ongoing worldwide customer service and support capabilities to remain competitive, which may have a temporary adverse effect on our results of operations. During periods of increased demand, we may have difficulty obtaining sufficient components and subassemblies or increasing production quickly enough to meet our customers’ requirements.
Market pressures and increased low-cost competition may reduce or eliminate our profitability.
Our customers continually exert pressure on us to reduce our prices and extend payment terms. Given the nature of our customer base and the highly competitive markets in which we compete, we may be required to reduce our prices or extend payment terms to remain competitive. We have recently seen pricing pressure from our largest customers due in part to low-cost competition and market consolidation. We believe some of our Asian competitors benefit from local governmental funding incentives and purchasing preferences from end-user customers in their respective countries. Moreover, in order to be successful in the current competitive environment, we are required to accelerate our investment in research & development to meet time-to-market, performance and technology adoption cycle needs of our customers simply in order to compete for design wins, and if successful, receive potential purchase orders. Given such up-front investments we have to make and the competitive nature of our markets, we may not be able to reduce our expenses in an amount sufficient to offset potential margin declines or loss of business, and may not be able to meet customer product timeline expectations. The potential decrease in cash flow could materially and adversely impact our financial condition.
A significant portion of our sales and accounts receivable are concentrated among a few customers.
Our ten largest customers accounted for
66.4%
of our sales for the
three months
ended
March 31, 2016
and
64.0%
of our sales for the
three months
ended
March 31, 2015
. During the
three months
ended
March 31, 2016
and
2015
, we had sales to two customers which individually accounted for over 10% of our sales. Sales to Applied Materials, Inc. and LAM Research were
$33.8 million
and
$22.0 million
or
32.8%
and
21.4%
, respectively, for the
three months
ended
March 31, 2016
, and
$35.0 million
and
$20.4 million
or
32.0%
and
18.6%
, respectively, for the
three months
ended
March 31, 2015
. Our sales to Applied Materials, Inc. and LAM Research include precision power products used in semiconductor processing and solar, flat panel display, and architectural glass applications. No other customer accounted for
10%
or more of our sales during these periods.
Our competitive position could be weakened if we are unable to convince end users to specify that our products be used in the equipment sold by our customers.
The end users in our markets may direct equipment manufacturers to use a specified supplier’s product in their equipment at a particular facility. This occurs with frequency because our products are critical in manufacturing process control for thin-film applications. Our success, therefore, depends in part on our ability to have end users specify that our products be used at their facilities. In addition, we may encounter difficulties in changing established relationships of competitors that already have a large installed base of products within such facilities.
We must achieve design wins to retain our existing customers and to obtain new customers, although design wins achieved do not necessarily result in substantial sales.
The constantly changing nature of technology in the markets we serve causes equipment manufacturers to continually design new systems. We must work with these manufacturers early in their design cycles to modify our equipment or design new equipment to meet the requirements of their new systems. Manufacturers typically choose one or two vendors to provide the components for use with the early system shipments. Selection as one of these vendors is called a design win. It is critical that we achieve these design wins in order to retain existing customers and to obtain new customers.
We believe that equipment manufacturers often select their suppliers based on factors including long-term relationships and end user demand. Accordingly, we may have difficulty achieving design wins from equipment manufacturers who are not currently our customers. In addition, we must compete for design wins for new systems and products of our existing customers, including those with whom we have had long-term relationships. Our efforts to achieve design wins are time consuming, expensive, and may not be successful. If we are not successful in achieving design wins, or if we do achieve design wins but our customers’ systems that utilize our products are not successful, our business, financial condition, and results of operations could be materially and adversely impacted.
Once a manufacturer chooses a component for use in a particular product, it is likely to retain that component for the life of that product. Our sales and growth could experience material and prolonged adverse effects if we fail to achieve design wins. However, design wins do not always result in substantial sales, as sales of our products are dependent upon our customers’ sales of their products.
Our legacy inverter products may suffer higher than anticipated damage or warranty claims.
Our legacy inverter products (of which we discontinued the manufacture, engineering, and sale in December 2015 and which are reflected as Discontinued Operations in this filing) contain components that may contain errors or defects and were sold with original product warranties ranging from one to ten years with an option to purchase additional warranty coverage for up to 20 years. If any of our products are defective or fail because of their design, we might be required to repair, redesign or recall those products, pay damages (including liquidated damages) or warranty claims, and we could suffer significant harm to our reputation.
We accrue a warranty reserve for estimated costs to provide warranty services including the cost of technical support, product repairs, and product replacement for units that cannot be repaired. Our estimate of costs to fulfill our warranty obligations is based on historical experience and expectation of future conditions. To the extent we experience increased warranty claim activity or increased costs associated with servicing those claims, our warranty accrual will increase, resulting in additional expenses in the line "Income (loss) from discontinued operations, net of tax” on our Consolidated Statement of Operations in future periods. We plan to continue supporting inverter customers with service maintenance and repair operations. This includes performing service to fulfill obligations under existing service maintenance contracts. There is no certainty that these can be performed profitably and could be adversely affected by higher than anticipated product failure rates, loss of critical service technician skills, an inability to obtain service parts, customer demands and disputes and cost of repair parts, among other factors. See
Note 2. Discontinued Operations
in our Unaudited Condensed Consolidated Financial Statements contained herein.
Our products may suffer from defects or errors leading to damage or warranty claims.
Our products use complex system designs and components that may contain errors or defects, particularly when we incorporate new technology into our products or release new versions. If any of our products are defective or fail because of their design, we might be required to repair, redesign or recall those products, pay damages (including liquidated damages) or warranty claims, and we could suffer significant harm to our reputation. We accrue a warranty reserve for estimated costs to provide warranty services including the cost of technical support, product repairs, and product replacement for units that cannot be repaired. Our estimate of costs to fulfill our warranty obligations is based on historical experience and expectation of future conditions. To the extent we experience increased warranty claim activity or increased costs associated with servicing those claims, our warranty accrual will increase, resulting in decreased gross profit. In recent years, we have experienced increased warranty costs for our legacy inverter product lines, which is reflected in discontinued operations. See
Note 2. Discontinued Operations
in our Unaudited Condensed Consolidated Financial Statements contained herein.
We maintain significant amounts of cash in international locations.
Given the global nature of our business, we have both domestic and international concentrations of cash and investments. The value of our cash, cash equivalents, and marketable securities can be negatively affected by liquidity, credit deterioration, financial results, economic risk, political risk, sovereign risk or other factors. As a result, we could incur a significant impairment of our cash, cash equivalents, and marketable securities, which could materially adversely affect our financial condition and results of operations.
Changes in tax laws, tax rates, or mix of earnings in tax jurisdictions in which we do business, could impact our future tax liabilities and related corporate profitability
We are subject to income taxes in the U.S. (federal and state) and numerous foreign jurisdictions. Tax laws, regulations, and administrative practices in various jurisdictions may be subject to significant change due to economic, political, and other conditions, and significant judgment is required in evaluating and estimating our provision and accruals for these taxes. There are many transactions that occur during the ordinary course of business for which the ultimate tax determination is uncertain. Our effective tax rates could be adversely affected by earnings being lower than anticipated in jurisdictions where we have lower statutory rates and higher than anticipated in jurisdictions where we have higher statutory rates, losses incurred in jurisdictions for which we are not able to realize the related tax benefit, changes in foreign currency exchange rates, entry into new businesses and geographies and changes to our existing businesses, acquisitions (including integrations) and investments, changes in our deferred tax assets and liabilities and their valuation, and changes in the relevant tax, accounting, and other laws, regulations, administrative practices, principles, and interpretations, including fundamental changes to the tax laws applicable to corporate multinationals. The U.S., many countries in the European Union, and a number of other countries are actively considering changes in this regard.
For example, on Oct. 5, 2015, the Organisation for Economic Co-operation and Development (OECD) issued the final report on all 15 Base Erosion and Profit Shifting “BEPS” Action Plans. According to the OECD, the current rules have created opportunities for Base Erosion and Profit Shifting, and suggest new rules whereby profits are taxed where economic activities take place and value is created. OECD comments include new or reinforced international standards as well as concrete measures to help countries tackle BEPS. Among the highlights of the OECD Final Reports are the new transfer pricing approach and reinforced international standards on tax treaties, the setting of minimum standards on harmful tax practices, treaty abuse, country-by-country reporting and dispute resolution, action items requiring national legislation particularly in hybrid mismatches and interest restriction, and analytical reports with recommendations concerning digital economy and multilateral instruments. If countries in which we operate adopt the OECD recommendations as outlined in the BEPS Action Plans, it is uncertain to what extent the changes could impact the company.
Difficulties with our enterprise resource planning (“ERP”) system and other parts of our global information technology system could harm our business and results of operation.
Like many multinational corporations, we maintain a global information technology system, including software products licensed from third parties. Any system, network or Internet failures, misuse by system users, the hacking into or disruption caused by unauthorized access or loss of license rights could disrupt our ability to timely and accurately manufacture and ship products or to report our financial information in compliance with the timelines mandated by the SEC. Any such failure, misuse, hacking, disruptions or loss would likely cause a diversion of management's attention from the underlying business and could harm our operations. In addition, a significant failure of our global information technology system could adversely affect our ability to complete an evaluation of our internal controls and attestation activities pursuant to Section 404 of the Sarbanes-Oxley Act of 2002.
If our network security measures are breached and unauthorized access is obtained to a customer's data or our data or our information technology systems, we may incur significant legal and financial exposure and liabilities.
As part of our day-to-day business, we store our data and certain data about our customers in our global information technology system. While our system is designed with access security, unauthorized access to our data, including any regarding our customers, could expose us to a risk of loss of this information, loss of business, litigation and possible liability. These security measures may be breached by intentional misconduct by computer hackers, as a result of third-party action, employee error, malfeasance or otherwise. Additionally, third parties may attempt to fraudulently induce employees or customers into disclosing sensitive information such as user names, passwords or other information in order to gain access to our customers' data or our data, including our intellectual property and other confidential business information, or our information technology systems. Because the techniques used to obtain unauthorized access, or to sabotage systems, change frequently and generally are not recognized until launched against a target, we may be unable to anticipate these techniques or to implement adequate preventative measures. Any security breach could result in a loss of confidence by our customers, damage our reputation, disrupt our business, lead to legal liability and negatively impact our future sales.
We conduct manufacturing at only a few sites and our sites are not generally interchangeable.
Our power products for the semiconductor industry are manufactured in Shenzhen, PRC. Our high voltage products are manufactured in Ronkonkoma, New York Littlehampton, United Kingdom and Shenzhen, PRC. Our thermal instrumentation products that are used in the semiconductor industry are manufactured in Vancouver, Washington. Each facility is under operating lease and interruptions in operations could be caused by early termination of existing leases by landlords or failure by landlords to renew existing leases upon expiration, including the possibility that suitable operating locations may not be available in proximity to existing facilities which could result in labor or supply chain risks. For instance, our Shenzhen, PRC manufacturing facility currently has a lease which expires in July 2017 that we are actively working on and expect to extend. Each facility manufactures different products, and therefore, is not interchangeable. Natural or other uncontrollable occurrences at any of our manufacturing facilities could significantly reduce our productivity at such site and could prevent us from meeting our customers’ requirements in a timely manner, or at all. Our losses from any such occurrence could significantly affect our operations and results of operations for a prolonged period of time.
Our restructuring and other cost-reduction efforts in prior years have included transitioning manufacturing operations to our facility in Shenzhen from other manufacturing facilities, such as Fort Collins, Colorado and Littlehampton, United Kingdom, which renders us increasingly reliant upon our Shenzhen facility. A disruption in manufacturing at our Shenzhen facility, from whatever cause, could have a significantly adverse effect on our ability to fulfill customer orders, our ability to maintain customer relationships, our costs to manufacture our products and, as a result, our results of operations and financial condition.
Our results of operations could be affected by natural disasters and other events in the locations in which we or our customers or suppliers operate.
We have manufacturing and other operations in locations subject to natural occurrences such as severe weather and geological events including earthquakes or tsunamis that could disrupt operations. In addition, our suppliers and customers also have operations in such locations. A natural disaster, fire, explosion, or other event that results in a prolonged disruption to our operations, or the operations of our customers or suppliers, may materially adversely affect our business, results of operations, or financial condition.
Our operations in the People’s Republic of China are subject to significant political and economic uncertainties over which we have little or no control and we may be unable to alter our business practice in time to avoid reductions in revenues.
A significant portion of our operations outside the United States are located in the PRC, which exposes us to risks, such as exchange controls and currency restrictions, changes in local economic conditions, changes in customs regulations, changes in
tax policies, changes in PRC laws and regulations, possible expropriation or other PRC government actions, and unsettled political conditions including potential changes in U.S. policy regarding overseas manufacturing. These factors may have a material adverse effect on our operations, business, results of operations, and financial condition. Please see
"We are exposed to risks associated with worldwide financial markets and the global economy"
risk factor above.
The PRC’s economy differs from the economies of most developed countries in many respects, including with respect to the amount of government involvement, level of development, rate of growth, control of foreign exchange and allocation of resources. While the economy of the PRC has experienced significant growth in the past 20 years, growth has been uneven across different regions and amongst various economic sectors of the PRC. The PRC government has implemented various measures to encourage economic development and guide the allocation of resources. Strikes by workers and picketing in front of the factory gates of certain companies in Shenzhen have caused unrest among some workers seeking higher wages, which could impact our manufacturing facility in Shenzhen. While some of the government's measures may benefit the overall economy of the PRC, they may have a negative effect on us. For example, our financial condition and results of operations may be materially and adversely affected by government control over capital investments or changes in tax regulations that are applicable to us as well as work stoppages.
We transitioned a significant amount of our supply base to Asian suppliers.
We transitioned the purchasing of a substantial portion of components for our thin film products to Asian suppliers to lower our materials costs and shipping expenses. These components might require us to incur higher than anticipated testing or repair costs, which would have an adverse effect on our operating results. Customers who have strict and extensive qualification requirements might not accept our products if these lower-cost components do not meet their requirements. A delay or refusal by our customers to accept such products, as well as an inability of our suppliers to meet our purchasing requirements, might require us to purchase higher-priced components from our existing suppliers or might cause us to lose sales to these customers, either of which could lead to decreased revenue and gross margins and have an adverse effect on our results of operations.
Our evolving manufacturing footprint may increase our risk.
The nature of our manufacturing is evolving as we continue to grow by acquisition. Historically, our principal manufacturing location was in China; however, we have also added specialized manufacturing at our Littlehampton, United Kingdom and Ronkonkoma, New York facilities. From time to time we may migrate manufacturing of specific products between facilities or to third party manufacturers. If we do not successfully coordinate the timely manufacturing and distribution of our products during this time, we may have insufficient supply of products to meet customer demand, we could lose sales, we may experience a build-up in inventory, or we may incur additional costs.
Raw material, part, component, and subassembly shortages, exacerbated by our dependence on sole and limited source suppliers, could affect our ability to manufacture products and systems and could delay our shipments.
Our business depends on our ability to manufacture products that meet the rapidly changing demands of our customers. Our ability to timely manufacture our products depends in part on the timely delivery of raw materials, parts, components, and subassemblies from suppliers. We rely on sole and limited source suppliers for some of our raw materials, parts, components, and subassemblies that are critical to the manufacturing of our products.
This reliance involves several risks, including the following:
|
|
|
|
•
|
the inability to obtain an adequate supply of required parts, components, or subassemblies;
|
|
|
|
|
•
|
supply shortages, if a sole or limited source provider ceases operations;
|
|
|
|
|
•
|
the need to fund the operating losses of a sole or limited source provider;
|
|
|
|
|
•
|
reduced control over pricing and timing of delivery of raw materials and parts, components, or subassemblies;
|
|
|
|
|
•
|
the need to qualify alternative suppliers;
|
|
|
|
|
•
|
suppliers that may provide parts, components or subassemblies that are defective, contain counterfeit goods or are otherwise misrepresented to us in terms of form, fit or function; and
|
|
|
|
|
•
|
the inability of our suppliers to develop technologically advanced products to support our growth and development of new products.
|
Qualifying alternative suppliers could be time consuming and lead to delays in, or prevention of delivery of products to our customers, as well as increased costs. If we are unable to qualify additional suppliers and manage relationships with our existing and future suppliers successfully, if our suppliers experience financial difficulties including bankruptcy, or if our suppliers cannot
meet our performance or quality specifications or timing requirements, we may experience shortages, delays, or increased costs of raw materials, parts, components, or subassemblies. This in turn could limit or prevent our ability to manufacture and ship our products, which could materially and adversely affect our relationships with our current and prospective customers and our business, financial condition, and results of operations. From time to time, our sole or limited source suppliers have given us notice that they are ending supply of critical parts, components, and subassemblies that are required for us to deliver product. In those cases, we have been required to make last time purchases of such supplies in advance of product demand from our customers. If we cannot qualify alternative suppliers before these end-of-life supplies are utilized in our products or legacy inverter warranty operations, we may be unable to deliver further product or legacy inverter warranty service to our customers. To mitigate the risk of not having a supply of critical parts, components, and subassemblies for our products, we proactively make additional purchases which we believe addresses such risk.
Our orders of raw materials, parts, components, and subassemblies are based on demand forecasts.
We place orders with many of our suppliers based on our customers’ quarterly forecasts and our annual forecasts. These forecasts are based on our customers’ and our expectations as to demand for our products. As the quarter and the year progress, such demand can change rapidly or we may realize that our customers’ expectations were overly optimistic or pessimistic, especially when industry or general economic conditions change. Orders with our suppliers cannot always be amended in response. In addition, in order to assure availability of certain components or to obtain priority pricing, we have entered into contracts with some of our suppliers that require us to purchase a specified amount of components and subassemblies each quarter, even if we are not able to use such components or subassemblies. Moreover, we have obligations to some of our customers to hold a minimum amount of finished goods in inventory, in order to fulfill just in time orders, regardless of whether the customers expect to place such orders. We currently have firm purchase commitments and agreements with various suppliers to ensure the availability of components. See
Note 18. Commitments and Contingencies
in our Unaudited Condensed Consolidated Financial Statements contained herein for more information on our commitments. If demand for our products does not continue at current levels, we might not be able to use all of the components that we are required to purchase under these commitments and agreements, and our reserves for excess and obsolete inventory may increase, which could have a material adverse effect on our results of operations. If demand for our products exceeds our customers’ and our forecasts, we may not be able to timely obtain sufficient raw materials, parts, components, or subassemblies, on favorable terms or at all, to fulfill the excess demand.
We are exposed to risks associated with worldwide financial markets and the global economy.
Our business depends on the expansion of manufacturing capacity in our end markets and the installation base for the products we sell. In the past, severe tightening of credit markets, turmoil in the financial markets, and a weakening global economy have contributed to slowdowns in the industries in which we operate. Some of our key markets depend largely on consumer spending. Economic uncertainty, such as that recently experienced in the PRC, exacerbates negative trends in consumer spending and may cause our customers to push out, cancel, or refrain from placing equipment orders.
Difficulties in obtaining capital and uncertain market conditions may also lead to a reduction of our sales and greater instances of nonpayment. These conditions may similarly affect our key suppliers, which could affect their ability to deliver parts and result in delays for our products. Further, these conditions and uncertainty about future economic conditions could make it challenging for us to forecast our operating results and evaluate the risks that may affect our business, financial condition, and results of operations. As discussed in “
Our orders of raw materials, parts, components, and subassemblies are based on demand forecasts
,” a significant percentage of our expenses are relatively fixed and based, in part, on expectations of future net sales. If a sudden decrease in demand for our products from one or more customers were to occur, the inability to adjust spending quickly enough to compensate for any shortfall would magnify the adverse impact of a shortfall in net sales on our results of operations. Conversely, if market conditions were to unexpectedly recover and demand for our products were to increase suddenly, we might not be able to respond quickly enough, which could have a negative impact on our results of operations and customer relations.
We may not realize the expected results from the implementation of restructuring plans.
During the second quarters of 2013, 2014, and 2015, we implemented restructuring plans to align our cost structure with current industry conditions in our business. As part of these restructuring plans we reduced staff, exited excess office and warehouse space, relocated engineering and research and development resources closer to our customers, and transferred various operating activities, such as supply chain management, manufacturing, engineering and other activities, to our Shenzhen, China facility. This means we are even more dependent on our China-based operations. As with any restructuring initiative, there could be many unintended results and there are always risks that execution may not meet expectations in the future. If we are unable to effectively execute the initiatives under the plan or our customers' requirements change, we may not realize the expected results or could incur restructuring charges greater than anticipated, which could materially affect our financial condition and results of operations.
If we are unable to adjust our business strategy successfully for some of our product lines to reflect the increasing price sensitivity on the part of our customers, our business and financial condition could be harmed.
Our business strategy for many of our product lines has been focused on product performance and technology innovation to provide enhanced efficiencies and productivity. As a result of recent economic conditions and changes in various markets that we serve, our customers have experienced significant cost pressures. We have observed increased price sensitivity on the part of our customers. If competition against any of our product lines should come to focus solely on price rather than on product performance and technology innovation, we will need to adjust our business strategy and product offerings accordingly, and if we are unable to do so, our business, financial condition, and results of operations could be materially and adversely affected.
The markets we operate in are highly competitive.
We face substantial competition, primarily from established companies, some of which have greater financial, marketing, and technical resources than we do. We expect our competitors will continue to develop new products in direct competition with ours, improve the design and performance of their products, and introduce new products with enhanced performance characteristics. In order to remain competitive, we must improve and expand our products and product offerings. In addition, we may need to maintain a high level of investment in research and development and expand our sales and marketing efforts, particularly outside of the United States. We might not be able to make the technological advances and investments necessary to remain competitive. If we were unable to improve and expand our products and product offerings, our business, financial condition, and results of operations could be materially and adversely affected.
We are highly dependent on our intellectual property.
Our success depends significantly on our proprietary technology. We attempt to protect our intellectual property rights through patents and non-disclosure agreements; however, we might not be able to protect our technology, and competitors might be able to develop similar technology independently. In addition, the laws of some foreign countries might not afford our intellectual property the same protections as do the laws of the United States. Our intellectual property is not protected by patents in several countries in which we do business, and we have limited patent protection in other countries, including the PRC. The cost of applying for patents in foreign countries and translating the applications into foreign languages requires us to select carefully the inventions for which we apply for patent protection and the countries in which we seek such protection. Generally, our efforts to obtain international patents have been concentrated in the European Union and certain industrialized countries in Asia, including Korea, Japan, and Taiwan. If we are unable to protect our intellectual property successfully, our business, financial condition, and results of operations could be materially and adversely affected.
The PRC commercial law is relatively undeveloped compared to the commercial law in the United States. Limited protection of intellectual property is available under PRC law. Consequently, manufacturing our products in the PRC may subject us to an increased risk that unauthorized parties may attempt to copy our products or otherwise obtain or use our intellectual property. We cannot give assurance that we will be able to protect our intellectual property rights effectively or have adequate legal recourse in the event that we encounter infringements of our intellectual property in the PRC.
Activities necessary to integrate acquisitions may result in costs in excess of current expectations or be less successful than anticipated.
In 2014 we acquired PCM, HiTek, and UltraVolt, and we may acquire other businesses in the future. The success of such transactions will depend on, among other things, our ability to integrate assets and personnel acquired in these transactions and to apply our internal controls process to these acquired businesses. The integration of acquisitions may require significant attention from our management, and the diversion of management’s attention and resources could have a material adverse effect on our ability to manage our business. Furthermore, we may not realize the degree or timing of benefits we anticipated when we first entered into the acquisition transaction. If actual integration costs are higher than amounts originally anticipated, if we are unable to integrate the assets and personnel acquired in an acquisition as anticipated, or if we are unable to fully benefit from anticipated synergies, our business, financial condition, results of operations, and cash flows could be materially adversely affected.
Return on investments or interest rate declines on plan investments could result in additional unfunded pension obligations for the HiTek Power pension plan.
We currently have unfunded obligations in the HiTek Power pension plan. The extent of future contributions to the pension plan depends heavily on market factors such as the discount rate used to calculate our future obligations and the actual return on plan assets which enable future payments. We estimate future contributions to the plan using assumptions with respect to these and other items. While we are obligated to contribute
$1.0 million
per year through 2024 and our management believes that these assumptions are appropriate, changes to those assumptions could have a significant effect on future contributions. Additionally, a material deterioration in the funded status of the plan could increase pension expenses and reduce our profitability. See
Note 15.
Pension Liability
in our Unaudited Condensed Consolidated Financial Statements and
Off Balance Sheet Arrangements
in "Management's Discussion and Analysis of Financial Conditions and Results of Operations" contained herein.
We must continually design and introduce new products into the markets we serve to respond to competition and rapid technological changes.
We operate in a highly competitive environment where innovation is critical, our future success depends on many factors, including the effective commercialization and customer acceptance of our products and services. The development, introduction and support of a broadening set of products is critical to our continued success. Our results of operations could be adversely affected if we do not continue to develop new products, improve and develop new applications for existing products, and differentiate our products from those of competitors resulting in their adoption by customers.
We are subject to risks inherent in international operations.
Sales to our customers outside the United States were approximately
32.2%
and
34.2%
of our total sales for the
three months ended
March 31, 2016
and
2015
. The recent acquisitions of the power controls modules, and high voltage product lines have increased our presence in international locations. India is becoming a focus of possible expansion for sales, research and development, and manufacturing. Our success producing goods internationally and competing in international markets is subject to our ability to manage various risks and difficulties, including, but not limited to:
|
|
|
|
•
|
our ability to effectively manage our employees at remote locations who are operating in different business environments from the United States;
|
|
|
|
|
•
|
our ability to develop and maintain relationships with suppliers and other local businesses;
|
|
|
|
|
•
|
compliance with product safety requirements and standards that are different from those of the United States;
|
|
|
|
|
•
|
variations and changes in laws applicable to our operations in different jurisdictions, including enforceability of intellectual property and contract rights;
|
|
|
|
|
•
|
trade restrictions, political instability, disruptions in financial markets, and deterioration of economic conditions;
|
|
|
|
|
•
|
customs regulations and the import and export of goods (including, but not limited to, any United States imposition of antidumping or countervailing duty orders, safeguards, remedies, or compensation with respect to our products or subcomponents of our products, particularly those produced in the PRC);
|
|
|
|
|
•
|
the ability to provide sufficient levels of technical support in different locations;
|
|
|
|
|
•
|
our ability to obtain business licenses that may be needed in international locations to support expanded operations;
|
|
|
|
|
•
|
timely collecting accounts receivable from foreign customers including $
12.7 million
in accounts receivable from foreign customers as of
March 31, 2016
; and
|
|
|
|
|
•
|
changes in tariffs, taxes, and foreign currency exchange rates.
|
Our profitability and ability to implement our business strategies, maintain market share and compete successfully in international markets will be compromised if we are unable to manage these and other international risks successfully.
Unfavorable currency exchange rate fluctuations may lead to lower operating margins, or may cause us to raise prices, which could result in reduced sales.
Currency exchange rate fluctuations could have an adverse effect on our sales and results of operations and we could experience losses with respect to forward exchange contracts into which we may enter. Unfavorable currency fluctuations could require us to increase prices to foreign customers, which could result in lower net sales by us to such customers. Alternatively, if we do not adjust the prices for our products in response to unfavorable currency fluctuations, our results of operations could be materially and adversely affected. In addition, most sales made by our foreign subsidiaries are denominated in the currency of the country in which these products are sold and the currency in which they receive payment for such sales could be less valuable at the time of receipt as a result of exchange rate fluctuations. Given recent acquisitions in Europe, our exposure to fluctuations in the value of the Euro is becoming more significant. From time to time, we enter into forward exchange contracts and local currency purchased options to reduce currency exposure arising from intercompany sales of inventory. However, we cannot be certain that our efforts will be adequate to protect us against significant currency fluctuations or that such efforts will not expose us to additional exchange rate risks, which could materially and adversely affect our results of operations.
Changes in the value of the Chinese yuan could impact the cost of our operation in Shenzhen, PRC and our sales growth in our PRC markets.
The PRC government is continually pressured by its trading partners to allow its currency to float in a manner similar to other major currencies. In August 2015, China’s currency devalued by a cumulative 4.4% against the U.S. dollar, making Chinese exports cheaper and imports into China more expensive by that amount. However, the devaluation negatively impacts U.S. businesses that trade with China because it puts them at a cost disadvantage. Any change in the value of the Chinese yuan may impact our ability to control the cost of our products in the world market. Specifically, the decision by the PRC government to allow the yuan to begin to float against the United States dollar could significantly increase the labor and other costs incurred in the operation of our Shenzhen facility and the cost of raw materials, parts, components, and subassemblies that we source in the PRC, thereby having a material and adverse effect on our financial condition and results of operations.
We have been, and in the future may again be, involved in litigation. Litigation is costly and could result in further restrictions on our ability to conduct business or make use of market relationships we have developed, or an inability to prevent others from using technology.
Litigation may be necessary to enforce our commercial or property rights, to defend ourselves against claimed violations of such rights, or to protect our interests in regulatory, tax, customs, commercial, and other disputes or similar matters. Litigation often requires a substantial amount of our management's time and attention, as well as financial and other resources, including:
|
|
|
|
•
|
substantial costs in the form of legal fees, fines, and royalty payments;
|
|
|
|
|
•
|
restrictions on our ability to sell certain products or in certain markets;
|
|
|
|
|
•
|
an inability to prevent others from using technology we have developed; and
|
|
|
|
|
•
|
a need to redesign products or seek alternative marketing strategies.
|
Any of these events could have a significant adverse effect on our business, financial condition, and results of operations.
Funds associated with our marketable securities that we have traditionally held as short-term investments may not be liquid or readily available.
In the past, certain of our investments have been affected by external market conditions that impacted the liquidity of the investment. We do not currently have investments with reduced liquidity, but external market conditions that we cannot anticipate or mitigate may impact the liquidity of our marketable securities. Any changes in the liquidity associated with these investments may require us to borrow funds at terms that are not favorable or repatriate cash from international locations at a significant cost. We cannot be certain that we will be able to borrow funds or continue to repatriate cash on favorable terms, or at all. If we are unable to do so, our available cash may be reduced until those investments can be liquidated. The lack of available cash may prevent us from taking advantage of business opportunities that arise and may prevent us from executing some of our business plans, either of which could cause our business, financial condition or results of operations to be materially and adversely affected.
Our intangible assets may become impaired.
We currently have
$43.9 million
of goodwill and
$33.5 million
in intangible assets at
March 31, 2016
. We periodically review the estimated useful lives of our goodwill and identifiable intangible assets, taking into consideration any events or circumstances that might result in either a diminished fair value, or for intangible assets, a revised useful life. The events and circumstances include significant changes in the business climate, legal factors, operating performance indicators, and competition. Any impairment or revised useful life could have a material and adverse effect on our financial position and results of operations, and could harm the trading price of our common stock.
We are subject to numerous governmental regulations.
We are subject to federal, state, local and foreign regulations, including environmental regulations and regulations relating to the design and operation of our products and control systems and regulations governing the import, export and customs duties related to our products. We might incur significant costs as we seek to ensure that our products meet safety and emissions standards, many of which vary across the states and countries in which our products are used. In the past, we have invested significant resources to redesign our products to comply with these directives. Compliance with future regulations, directives, and standards could require us to modify or redesign some products, make capital expenditures, or incur substantial costs. Also, we may incur significant costs in complying with the myriad of different import, export and customs regulations as we seek to sell our products internationally. If we do not comply with current or future regulations, directives, and standards:
|
|
|
|
•
|
we could be subject to fines and penalties;
|
|
|
|
|
•
|
our production or shipments could be suspended; and
|
|
|
|
|
•
|
we could be prohibited from offering particular products in specified markets.
|
If we were unable to comply with current or future regulations, directives and standards, our business, financial condition and results of operations could be materially and adversely affected.
Recently enacted financial reform legislation will result in new laws and regulations that may increase our costs of operations.
The Dodd-Frank Wall Street Reform and Consumer Protection Act (the "Dodd-Frank Act") requires various federal agencies to adopt a broad range of new implementing rules and regulations, and to prepare numerous studies and reports for Congress. On August 22, 2012, under the Dodd-Frank Act, the SEC adopted new requirements for companies that use certain minerals and metals, known as conflict minerals, in their products, whether or not these products are manufactured by third parties. These requirements require companies to perform due diligence, disclose and report whether or not such minerals originate from the Democratic Republic of Congo and adjoining countries. We have to perform sufficient due diligence to determine whether such minerals are used in the manufacture of our products. However, the implementation of these new requirements could adversely affect the sourcing, availability and pricing of such minerals if they are found to be used in the manufacture of our products. In addition, we incur costs to comply with the disclosure requirements, including costs related to determining the source of any of the relevant minerals and metals used in our products. Since our supply chain is complex, we may not be able to sufficiently verify the origins for these minerals and metals used in our products through the due diligence procedures that we implement, which may harm our reputation. In such event, we may also face difficulties in satisfying customers who require that all of the components of our products are certified as conflict mineral free.
The market price of our common stock has fluctuated and may continue to fluctuate for reasons over which we have no control.
The stock market has from time to time experienced, and is likely to continue to experience, extreme price and volume fluctuations. Prices of securities of technology companies have been especially volatile and have often fluctuated for reasons that are unrelated to their operating performance. In the past, companies that have experienced volatility in the market price of their stock have been the subject of securities class action litigation. If we were the subject of securities class action litigation, it could result in substantial costs and a diversion of management’s attention and resources.
Our operating results are subject to fluctuations, and if we fail to meet the expectations of securities analysts or investors, our share price may decrease significantly
.
Our annual and quarterly results may vary significantly depending on various factors, many of which are beyond our control. Because our operating expenses are based on anticipated revenue levels, our sales cycle for development work is relatively long, and a high percentage of our expenses are fixed for the short term, a small variation in the timing of recognition of revenue can cause significant variations in operating results from period to period. If our earnings do not meet the expectations of securities analysts or investors, the price of our stock could decline.
The loss of any of our key personnel could significantly harm our results of operations and competitive position.
Our success depends to a significant degree upon the continuing contributions of our key management, technical, marketing, and sales employees. There can be no assurance that we will be successful in retaining our key employees or that we can attract or retain additional skilled personnel as required. Failure to retain or attract key personnel could significantly harm our results of operations and competitive position. We must develop our personnel to provide succession plans capable of maintaining continuity in the midst of the inevitable unpredictability of personnel retention. While we have plans for key management succession and long-term compensation plans designed to retain our senior employees, if our succession plans do not operate effectively, our business could be adversely affected.
We have historically made acquisitions and divestitures. However, we may not find suitable acquisition candidates in the future and we may not be able to successfully integrate and manage acquired businesses. In either an acquisition or a divestiture, we may be required to make fundamental changes in our ERP, business processes and tools which could disrupt our core business and harm our financial condition.
In the past, we have made strategic acquisitions of other corporations and entities, as well as asset purchases, and we continue to evaluate potential strategic acquisitions of complementary companies, products, and technologies. We have also divested businesses. In the future, we could:
|
|
|
|
•
|
issue stock that would dilute our current stockholders' percentage ownership;
|
|
|
|
|
•
|
pay cash that would decrease our working capital;
|
|
|
|
|
•
|
incur expenses related to impairment of goodwill and amortization.
|
Acquisitions and divestitures also involve numerous risks, including:
|
|
|
|
•
|
problems combining or separating the acquired/divested operations, systems, technologies, or products;
|
|
|
|
|
•
|
an inability to realize expected sales forecasts, operating efficiencies or product integration benefits;
|
|
|
|
|
•
|
difficulties in coordinating and integrating geographically separated personnel, organizations, systems, and facilities;
|
|
|
|
|
•
|
difficulties integrating business cultures;
|
|
|
|
|
•
|
unanticipated costs or liabilities;
|
|
|
|
|
•
|
diversion of management's attention from our core business;
|
|
|
|
|
•
|
adverse effects on existing business relationships with suppliers and customers;
|
|
|
|
|
•
|
potential loss of key employees, particularly those of purchased organizations;
|
|
|
|
|
•
|
incurring unforeseen obligations or liabilities in connection with either acquisitions or divestitures; and
|
|
|
|
|
•
|
the failure to complete acquisitions even after signing definitive agreements which, among other things, would result in the expensing of potentially significant professional fees and other charges in the period in which the acquisition or negotiations are terminated.
|
We cannot assure you that we will be able to successfully identify appropriate acquisition candidates, to integrate any businesses, products, technologies, or personnel that we might acquire in the future or achieve the anticipated benefits of such transactions, which may harm our business.
Our existing credit facility contains restrictions that may limit our flexibility in operating our business.
In October 2012, we entered into a credit facility with Wells Fargo Bank, N.A. The credit facility contains various financial and negative operating covenants that limit our ability to engage in specified types of transactions. The financial covenant requires that we maintain a minimum fixed charge coverage ratio. The operating covenants limit our ability to, among other things:
|
|
|
|
•
|
sell, transfer, lease or dispose of our assets;
|
|
|
|
|
•
|
create, incur or assume additional indebtedness;
|
|
|
|
|
•
|
encumber or permit liens on certain of our assets
|
|
|
|
|
•
|
make restricted payments, including paying dividends on, repurchasing or making distributions with respect to our common stock;
|
|
|
|
|
•
|
make specified investments (including loans and advances);
|
|
|
|
|
•
|
consolidate, merge, sell or otherwise dispose of all or substantially all of our assets; and
|
|
|
|
|
•
|
enter into certain transactions with our affiliates.
|
A breach of any of these covenants or a material adverse change to our business could result in a default under the credit agreement. Upon the
occurrence of an event of default under our credit agreement, our lenders could elect to declare all amounts outstanding to be immediately due and payable and terminate all commitments to extend further credit. If we were unable to repay those amounts, the lenders could proceed against the collateral granted to them to secure such indebtedness. Please see
Note 21. Credit Facility
in our Unaudited Condensed Consolidated Financial Statements contained herein for more information on our credit facility.
Deterioration of economic conditions could negatively impact our business.
Our business may be adversely affected by changes in national or global economic conditions, including inflation, interest rates, availability of capital markets, consumer spending rates, energy availability and costs (including fuel surcharges) and the effects of governmental initiatives to manage economic conditions. Any such changes could adversely affect the demand for our products
both in domestic and export markets, or the cost and availability of our needed raw materials and packaging materials, thereby negatively affecting our financial results.
A disruption in credit and other financial markets and deterioration of national and global economic conditions, could, among other things:
|
|
|
|
•
|
negatively impact global demand for our products, which could result in a reduction of sales, operating income and cash flows;
|
|
|
|
|
•
|
make it more difficult or costly for us to obtain financing for our operations or investments or to refinance our debt in the future;
|
|
|
|
|
•
|
cause our lenders to depart from prior credit industry practice and make more difficult or expensive the granting of any technical or other waivers under our debt agreements to the extend we may seek them in the future;
|
|
|
|
|
•
|
decrease the value of our investments; and
|
|
|
|
|
•
|
impair the financial viability of our insurers.
|