qTerm
-
Ambient Temperature
Measurement Feature
Added
San Diego, CA --
November 19, 2020 -- InvestorsHub NewsWire
-- GBT Technologies Inc.
(OTC
PINK: GTCH)
("GBT", or the "Company"), announced that its
joint Venture, GBT Tokenize
Corp.,
is
enhancing qTerm
vitals
device, adding
an ambient temperature sensing system which the Company
intends to include in its first
version.
This feature
is
designed to sense the user's
surroundings temperature, as a reference for
accuracy.
qTerm
will let
the user know
in the event
the
ambient temperature is not 'optimum' for data measurement. In case
that the user is in an outdoors condition
that will affect the
measurement accuracy, it is designed to
provide an alert. In
hot or
cold geographical regions,
the
user's skin temperature may be elevated/declined due to
the surrounding
temperature. This may distort the measured
data. qTerm
will be
able to detect and alert for such probability. Another device
is
intended to be added
to
qTerm
in order
to detect extreme ambient temperature and advise the user to take
measurements in
a more neutral or climate controlled
area. A supporting firmware
code will work in conjunction with this feature and an additional
alerting system is planned to be embedded within the accompanied
mobile app. An advanced software module will be developed for the
backend program to geographically detect the user's environment
temperature according to his/her location. qTerm
will
include a
high-precision digital temperature sensor with a low power
consumption that will be used in a 'no-contact'
fashion. The
sensor is designed to
measure
temperatures with an
accuracy of up to ±0.1°C across the range of -20°C and 50°C with no
calibration. This
data will be used as a confirmation reference, comparing for the
actual taken measurement temperature
to the reported resources, together advising
the user
about potential inaccuracies and switching to a better environment
for optimum data results. An
ambient temperature is the actual temperature of the air in any
particular location, as measured by a thermal device and plays a
significant factor in a human body temperature measurement. This
feature is planned to be included within the first release
of qTerm.
"Imagine a
qTerm
user that
is currently located in Phoenix, AZ outdoors during summer time.
The outdoor temperature will cause the
user's skin temperature to be elevated and, therefore,
the data
reading will be inaccurate. qTerm
will
alert about taking
the measurement in
an area of extreme surrounding temperatures, advising to go into a
more climate
controlled
zone like indoors environment" said Danny Rittman,
GBT's
CTO.
"Another example is taking the temperature in New York City in the
outdoors. The user's finger
tip will be cold which will cause inaccurate results.
We are implementing another circuit within our qTerm
device to
measure the user's environment
temperature, alerting in case of extremes. In addition, our backend
program will verify the
measured ambient temperature, taking the data from online
resources, according to the user's location. Together with the
electronic circuit, which is a high-precision digital temperature
sensor actual results, qTerm
will
reach a conclusion about alerting the user or not. A supporting
code will be developed in order to create a pre-temp
measurement procedure
to ensure optimum ambient temperature before
checking the body temperature. We focus on accuracy and reliability
of human vitals and would like to ensure optimum conditions for
data measurement. Additionally,
we
may use
the ambient data at the 'system' level for further analysis
purposes.
qTerm
AI
software will be using the data to further analyze and record the
user's information for future use" continued
Danny
Rittman, GBT's
CTO.
Forward-Looking
Statements
Certain statements
contained in this press release may constitute "forward-looking
statements".
Forward-looking
statements provide current expectations of future events based on
certain assumptions and include any statement that does not
directly relate to any historical or current fact. Actual results
may differ materially from those indicated by such forward-looking
statements as a result of various important factors as disclosed in
our filings with the Securities and Exchange Commission located at
their website (
http://www.sec.gov).
In
addition to these factors, actual future performance, outcomes, and
results may differ materially because of more general factors
including (without limitation) general industry and market
conditions and growth rates, economic conditions, governmental and
public policy changes, the Company's ability to raise capital on
acceptable terms, if at all, the Company's successful development
of its products and the integration into its existing products and
the commercial acceptance of the Company's
products.
The
forward-looking statements included in this press release represent
the Company's views as of the date of this press release and these
views could change.
However,
while the Company may elect to update these forward-looking
statements at some point in the future, the Company specifically
disclaims any obligation to do so.
These
forward-looking statements should not be relied upon as
representing the Company's views as of any date subsequent to the
date of the press release.
Contact:
Dr. Danny
Rittman, CTO
GBT
Technologies Inc.