Annual Report (10-k)

Date : 09/23/2019 @ 5:36PM
Source : Edgar (US Regulatory)
Stock : Trio Tech International (TRT)
Quote : 3.4  0.02 (0.59%) @ 7:31PM

Annual Report (10-k)

 

 
UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
 
FORM 10-K
 

ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
For the fiscal year ended June 30, 2019
  OR
TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
For the Transition Period from ___ to ___
 
Commission File Number 1-14523
 
TRIO-TECH INTERNATIONAL
(Exact name of Registrant as specified in its Charter)
 
California
95-2086631
(State or other jurisdiction of
(I.R.S. Employer
incorporation or organization)
Identification Number)
 
 
  Block 1008 Toa Payoh North
 
  Unit 03-09 Singapore
318996
(Address of principal executive offices)
(Zip Code)
           Registrant's Telephone Number: (65) 6265 3300
 
Securities registered pursuant to Section 12(b) of the Act:
 
 
Name of each exchange
Title of each class
Trading Symbol
On which registered
Common Stock, no par value
TRT
 The NYSE MKT
 
Securities registered pursuant to Section 12(g) of the Act: None
 
Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in rule 405 of the Securities Act. Yes No
 
Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes No
 
Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes No
 
Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Website, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). Yes ⬜ No
 
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, smaller reporting company, or an emerging growth company. See the definition of “large accelerated filer,” “accelerated filer”, “smaller reporting company,” and “emerging growth company” in Rule 12b-2 of the Exchange Act. Large Accelerated Filer ☐ Accelerated Filer ☐ Non-Accelerated Filer (Do not check if a smaller reporting company) ☐ Smaller Reporting Company ☑  Emerging Growth Company ☐
 
If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ⬜
 
Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). ⬜Yes ☑No
 
The aggregate market value of voting stock held by non-affiliates of Registrant, based upon the closing price of $2.46 for shares of the registrant’s Common Stock on December 31, 2018, the last business day of the registrants most recently completed second fiscal quarter as reported by the NYSE MKT, was approximately $4,332,000. In calculating such aggregate market value, shares of Common Stock held by each officer, director and holder of 5% or more of the outstanding Common Stock (including shares with respect to which a holder has the right to acquire beneficial ownership within 60 days) were excluded because such persons may be deemed to be affiliates. This determination of affiliate status is not necessarily a conclusive determination for other purposes.
 
The number of shares of Common Stock outstanding as of September 1, 2019 was 3,673,055.
Documents Incorporated by Reference
Part III of this Form 10-K incorporates by reference information from Registrant’s Proxy Statement for its 2019 Annual Meeting of Shareholders to be filed with the Commission under Regulation 14A within 120 days of the end of the fiscal year covered by this Form 10-K.
  

 
 
 
TRIO-TECH INTERNATIONAL
 
INDEX
 
 
 
 
Page
 
 
 
 
 
1
6
6
6
7
7
 
 

 

 
 

7
7
8
24
24
24
24
25
 
 

 

 

26
26
26
26
26
 
 

 
 
 
 

26
26
 
 

 
27
 
28
 
F-1
 
F-2
 
F-3
 
F-5
 
F-6
 
F-8
 
 
 
 
TRIO-TECH INTERNATIONAL
 
PART I
 
ITEM 1 – BUSINESS (IN THOUSANDS, EXCEPT PERCENTAGES AND SHARE AMOUNTS)
 
Cautionary Statement Regarding Forward-Looking Statements
 
The discussions of Trio-Tech International’s (the “Company”) business and activities set forth in this Form 10-K and in other past and future reports and announcements by the Company may contain forward-looking statements within the meaning of Section 27A of the Securities Act of 1933, as amended, and Section 21E of the Securities Exchange Act of 1934, as amended, and assumptions regarding future activities and results of operations of the Company. In light of the “safe harbor” provisions of the Private Securities Litigation Reform Act of 1995, the following factors, among others, could cause actual results to differ materially from those reflected in any forward-looking statements made by or on behalf of the Company: market acceptance of Company products and services; changing business conditions or technologies and volatility in the semiconductor industry, which could affect demand for the Company’s products and services; the impact of competition; problems with technology; product development schedules; delivery schedules; changes in military or commercial testing specifications which could affect the market for the Company’s products and services; difficulties in profitably integrating acquired businesses, if any, into the Company; risks associated with conducting business internationally and especially in Asia, including currency fluctuations and devaluation, currency restrictions, local laws and restrictions and possible social, political and economic instability; credit risks in the Chinese real estate industry; changes in macroeconomic conditions and credit market conditions; and other economic, financial and regulatory factors beyond the Company’s control. In some cases, you can identify forward-looking statements by the use of terminology such as “may,” “will,” “expects,” “plans,” “anticipates,” “estimates,” “potential,” “believes,” “can impact,” “continue,” or the negative thereof or other comparable terminology.
 
Unless otherwise required by law, the Company undertakes no obligation to update forward-looking statements to reflect subsequent events, changed circumstances, or the occurrence of unanticipated events. You are cautioned not to place undue reliance on such forward-looking statements.
 
General
 
Trio-Tech International was incorporated in 1958 under the laws of the State of California. As used herein, the term "Trio-Tech" or "Company” or “we” or “us” or “Registrant” includes Trio-Tech International and its subsidiaries unless the context otherwise indicates. The mailing address and executive offices are located at Block 1008 Toa Payoh North, Unit 03-09 Singapore 318996, Singapore, and the telephone number is (65) 6265 3300.
 
We make available through our website, free of charge, our Annual Reports on Form 10-K, Quarterly Reports on Form 10-Q, Current Reports on Form 8-K, proxy statements and any amendments to those reports or statements filed or furnished pursuant to Section 13(a) or 15(d) of the Securities Exchange Act of 1934, as soon as reasonably practicable after they are electronically filed with or furnished to the SEC. The SEC also maintains an internet site at www.sec.gov that contains such reports and statements filed electronically with the SEC by the Company. Additional information about Trio-Tech is available on our website at www. triotech.com.
 
During fiscal year 2019, the Company operated its business in four segments: manufacturing, testing services, distribution and real estate. Geographically, the Company operates in the United States (“U.S.”), Singapore, Malaysia, Thailand and China. It operates six testing service facilities; one in the U.S. and five in Asia. It operates two manufacturing facilities: one in the U.S. and the other in Asia. Its distribution segment and real estate segment operate primarily in Asia. Its major customers are concentrated in Asia and they are either semiconductor chip manufacturers or testing facilities that purchase testing equipment. For information relating to revenues, profit and loss and total assets for each of the segments, see Note 19 - Business Segments contained in the consolidated financial statements included in this Form 10-K.
 
 
 
Company History – Certain Highlights For the Five Fiscal Years ended June 30, 2019
 
2015

Trio-Tech (Tianjin) Co., Ltd., re-certified to ISO 9001:2008 standards.
Trio-Tech International Pte. Ltd., Singapore, Trio-Tech (Malaysia) Sdn. Bhd. and Trio-Tech (Bangkok) Co., Ltd. re-certified to ISO 9001:2008 standards. (Aug 2015)
Trio-Tech International Pte. Ltd., Singapore, re-certified to ISO 14001:2004 standards. (Aug 2015)

2016
Trio-Tech (Tianjin) Co., Ltd., re-certified to ISO 14001:2004 standards. (July 2016)
Trio-Tech (Tianjin) Co., Ltd., re-certified to OHSAS 18001:2007 standards. (July 2016)
 
2017
Trio-Tech International Pte. Ltd., Singapore, re-certified to biz SAFE Level 3 Workplace Safety and Health standards.    
 
2018
Trio-Tech (Tianjin) Co. Ltd. re-certified to ISO 9001:2015 standards. (Apr 2018). 
Trio-Tech International Pte. Ltd. (Singapore) re-certified to ISO 9001:2015 standards. (Jun 2018)
Trio-Tech (Malaysia) Sdn. Bhd. re-certified to ISO 9001:2015 standards. (Jun 2018)
Trio-Tech (Bangkok) Co. Ltd. re-certified to ISO 9001:2015 standards. (Jun 2018)
Trio-Tech International Pte. Ltd. (Singapore) re-certified to ISO 14001:2015 standards. (Jun 2018)
 
2019
Trio-Tech (Tianjin) Co. Ltd. recertified to ISO 14001:2015 standard. (July 2019)
Trio-Tech (Tianjin) Co. Ltd. recertified to OHSAS 18001:2007 standard. (July 2019)
 
Overall Business Strategies
 
Our core business is and historically has been in the semiconductor industry (testing services, manufacturing-assembly) manufacturing and distribution. Revenue from the semiconductor industry accounted for 99.8% and 99.7% of our total revenue for fiscal years 2019 and 2018 respectively. The semiconductor industry has experienced periods of rapid growth, but has also experienced downturns, often in connection with, or in anticipation of, maturing product cycles of both semiconductor companies’ and their customers’ products and declines in general economic conditions. To reduce our risks associated with sole industry focus and customer concentration, the Company continues to put effort into expanding for new businesses in different industry. Real Estate segment contributed only 0.2% to the total revenue for fiscal 2019 and has been an insignificant business operation since the property market in China has slowed down due to control measures in China. We are continuing the process of winding-down our oil & gas equipment fabrication operations, which discontinued its operations in December 2012.
 
To achieve our strategic plan for our semiconductor business, we believe that we must pursue and win new business in the following areas:
 
Primary markets – Capturing additional market share within our primary markets by offering superior products and services to address the needs of our major customers.
 
Growing markets – Expanding our geographic reach in areas of the world with significant growth potential.
 
New markets – Developing new products and technologies that serve wholly new markets.
 
Complementary strategic relationships Through complementary acquisitions or similar arrangements, we believe we can expand our markets and strengthen our competitive position. As part of our growth strategy, the Company continues to selectively assess opportunities to develop strategic relationships, including acquisitions, investments and joint development projects with key partners and other businesses.
 
 
 
 
Business Segments

Testing Services
 
Our testing services are rendered to manufacturers and purchasers of semiconductors and other entities who either lack testing capabilities or whose in-house screening facilities are insufficient for testing devices in order for them to make sure that these products meet certain commercial specifications. Customers outsource their test services either to accommodate fluctuations in output or to benefit from economies that can be offered by third party service providers.
 
Our laboratories perform a variety of tests, including stabilization bake, thermal shock, temperature cycling, mechanical shock, constant acceleration, gross and fine leak tests, electrical testing, microprocessor equipment contract cleaning services, static and dynamic burn-in tests, reliability lab services and vibration testing. We also perform qualification testing, consisting of intense tests conducted on small samples of output from manufacturers who require qualification of their processes and devices.
 
We use our own proprietary equipment for certain burn-in, centrifugal and leak tests, and commercially available equipment for various other environmental tests. We conduct the majority of our testing operations in Asia with facilities in Singapore, Malaysia, Thailand and China, which have been certified to the relevant ISO quality management standards.
 
Manufacturing
 
We manufacture both front-end and back-end semiconductor test equipment and related peripherals at our facilities in Singapore and the U.S.
 
Front-End Products
 
Artic Temperature Controlled Wafer Chucks
 
Artic Temperature Controlled Wafer Chucks are used for test, characterization and failure analysis of semiconductor wafers and such other components at accurately controlled cold and hot temperatures. These systems provide excellent performance to meet the most demanding customer applications. Several unique mechanical design features provide excellent mechanical stability under high probing forces and across temperature ranges.
 
Wet Process Stations
 
Wet Process Stations are used for cleaning, rinsing and drying semiconductor wafers, flat panel display magnetic disks, and other microelectronic substrates. After the etching or deposition of integrated circuits, wafers are typically sent through a series of 100 to 300 additional processing steps. At many of these processing steps, the wafer is washed and dried using Wet Process Stations.
 
Back-End Products
 
Autoclaves and HAST (Highly Accelerated Stress Test) Equipment
 
We manufacture autoclaves, HAST systems and specialized test fixtures. Autoclaves provide pressurized, saturated vapor (100% relative humidity) test environments for fast and easy monitoring of integrated circuit manufacturing processes. HAST systems provide a fast and cost-effective alternative to conventional non-pressurized temperature and humidity testing.
 
 
 
Burn-in Equipment and Boards
 
We manufacture burn-in systems, burn-in boards and burn-in board test systems. Burn-in equipment is used to subject semiconductor devices to elevated temperatures while testing them electrically to identify early product failures and to assure long-term reliability. Burn-in boards are used to mount devices during high temperature environmental stressing tests.
 
We provide integrated burn-in automation solutions to improve products’ yield, reduce processing downtime and improve efficiency. In addition, we develop a cooling solution, which is used to cool or maintain the temperature of high power heat dissipation semiconductor devices.
 
Component Centrifuges and Leak Detection Equipment
 
We manufacture centrifuges that perform high speed constant acceleration to test the mechanical integrity of ceramic and other hermetically sealed semiconductor devices and electronic parts for high reliability and aerospace applications. Leak detection equipment is designed to detect leaks in hermetic packaging. The bubble tester is used for gross leak detection. A visual bubble trail will indicate when a device is defective.
 
Distribution
 
In addition to marketing our proprietary products, we distribute complementary products made by manufacturers mainly from the U.S., Europe, Taiwan and Japan. The products include environmental chambers, handlers, interface systems, vibration systems, shaker systems, solderability testers and other, semiconductor equipment. Besides equipment, we also distribute a wide range of components such as connectors, sockets, LCD display panels and touch-screen panels. Furthermore, our range of products are mainly targeted for industrial products, the life cycle of which can last from 3 years to 7 years, rather than consumer products which have a shorter life cycle.
 
Real Estate
 
Beginning in 2007, TTI invested in real estate property in Chongqing, China, which has generated investment income from the rental revenue and investment returns from deemed loan receivables, which are classified as other income. The rental income is generated from the rental properties in MaoYe and FuLi in Chongqing, China. In the second quarter of fiscal 2015, the investment in JiaSheng, which was deemed as loans receivable, was transferred to down payment for purchase of investment property in China. 
 
Product Research and Development
 
We focus our research and development activities on improving and enhancing both product design and process technology. We conduct product and system research and development activities for our products in Singapore and the U.S. Research and development expenses were $345 and $451 in fiscal years 2019 and 2018, respectively.
 
Marketing, Distribution and Services
 
We market our products and services worldwide, directly and through independent sales representatives and our own marketing sales team. We have approximately five independent sales representatives operating in the U.S. and another twenty in various foreign countries. All sales representatives represented the testing services segment and the manufacturing segment for various products and services produced and provided from our facilities in different locations.
 
Dependence on Limited Number of Customers
 
In fiscal years 2019 and 2018, combined sales of equipment and services to our three largest customers accounted for approximately 58.3% and 64.0%, respectively, of our total net revenue. Of those sales, $16,421 (41.9%) and $21,648 (51.4%), of our total net revenue were from one major customer. Although the major customer is a U.S. company, the revenue generated from it was from facilities located outside of the U.S. The majority of our sales and services in fiscal years 2019 and 2018 were to customers outside of the U.S.
 
 
 
Backlog
 
The following table sets forth the Company's backlog at the dates indicated:
 
 
 
For the Year Ended June 30,
 
 
 
 2019
 
 
2018
 
Manufacturing backlog
 $4,210 
 $4,324 
Testing services backlog
  4,292 
  4,927 
Distribution backlog
  1,494 
  2,781 
Real estate backlog*
  153 
  293 
 
 $10,149 
 $12,325 
 
*Real estate backlog is based on the rental income from a non-cancellable lease.
 
Based on our past experience, we do not anticipate any significant cancellations or re-negotiation of sales. The purchase orders for the manufacturing, testing services and distribution businesses generally require delivery within 12 months from the date of the purchase order and certain costs are incurred before delivery. In the event of a cancellation of a confirmed purchase order, we require our customers to reimburse us for all costs incurred. We do not anticipate any difficulties in meeting delivery schedules. For testing services, the backlog is based on estimates provided by our customers and is not based on a customer’s purchase order as it is a practice that the purchase orders are provided only during the process of delivery. During the fiscal year 2019, management has revised the basis of estimation to be more reflective of realizable revenue, and thus the prior year amount has been restated for comparison purpose.
 
Materials and Supplies
 
Our products are designed by our engineers and are assembled and tested at our facilities in the U.S., China and Singapore. We purchase all parts and certain components from outside vendors for assembly purposes. We have no written contracts with any of our key suppliers. As these parts and components are available from a variety of sources, we believe that the loss of any one of our suppliers would not have a material adverse effect on our results of operations taken as a whole.
 
Competition
 
Our ability to compete depends on our ability to develop, introduce and sell new products or enhanced versions of existing products on a timely basis and at competitive prices, while reducing our costs.
 
There are numerous testing laboratories in the areas where we operate that perform a range of testing services similar to those offered. However, due to severe competition in the Asia testing and burn-in services industry there has been a reduction in the total number of competitors. The existence of competing laboratories and the purchase of testing equipment by semiconductor manufacturers and users are potential threats to our future testing services revenue and earnings. Although these laboratories and new competitors may challenge us at any time, we believe that other factors, including reputation, long service history and strong customer relationships, are instrumental in determining our position in the market.
 
The distribution segment sells a wide range of equipment to be used for testing products. As the semiconductor equipment industry is highly competitive, we offer a one-stop service alternative to customers by complementing our products with design consultancy and other value-added services.
 
The principal competitive factors in the manufacturing industry include product performance, reliability, service and technical support, product improvements, price, established relationships with customers and product familiarity. We make every effort to compete favorably with respect to each of these factors. Although we have competitors for our various products, we believe that our products compete favorably with respect to each of the above factors. We have been in business for more than 60 years and have operation facilities mostly located in Asia. Those factors combined have helped us to establish and nurture long-term relationships with customers and will allow us to continue doing business with our existing customers upon their relocation to other regions where we have a local presence or are able to reach.
 
 
 
Patents
 
In fiscal years 2019 and 2018, we did not register any patents within the U.S.
 
It is typical in the semiconductor industry to receive notices from time to time alleging infringement of patents or other intellectual property rights of others. We do not believe that we infringe on the intellectual property rights of any others. However, should any claims be brought against us, the cost of litigating such claims and any damages could materially and adversely affect our business, financial condition, and results of operations.
 
Employees
 
As of June 30, 2019, we had approximately 574 full time employees and no part time employees. Geographically, approximately 9 full time employees were located in the U.S. and approximately 565 full time employees in Asia. None of our employees are represented by a labor union.
 
There were approximately 59 employees in the manufacturing segment, 479 employees in the testing services segment, 3 employees in the distribution segment, 3 employees in the real estate segment and 30 employees in general administration, logistics and others.
 
ITEM 1A – RISK FACTORS
 
As a smaller reporting company as defined by Rule 12b-2 of the Securities Exchange Act of 1934, we are not required to provide the information required by this item.
 
ITEM 1B – UNRESOLVED STAFF COMMENTS
 
Not applicable.
 
ITEM 2 – PROPERTIES
 
As of the date of filing of this Form 10-K, we believe that we are utilizing approximately 80% of our fixed property capacity. We also believe that our existing facilities are adequate and suitable to cover any sudden increase in our needs in the foreseeable future.
 
The following table presents the relevant information regarding the location and general character of our principal manufacturing and testing facilities:
Location      
Segment  
Approx. Sq. Ft. Occupied 
    Owned (O) or Leased (L)
& Expiration Date
16139 Wyandotte Street, Van Nuys,
CA 91406,
United States of America
Corporate,
Testing Services / Manufacturing
5,200
(L) March 2020
 
1004, Toa Payoh North, Singapore
Unit No. HEX 07-01/07
Testing Services
6,864
(L) Sept 2020
Unit No. HEX 07-01/07, (ancillary site)
Testing Services
2,532
(L) Sept 2020
Unit No. HEX 03-01/02/03
Testing Services / Manufacturing
2,959
(L) Sept 2020
Unit No. HEX 01-08/15
Testing Services / Manufacturing / Logistics Store
6,864
(L) Jan 2020
Unit No. HEX 01-08/15, (ancillary site)
Testing Services / Manufacturing
449
(L) Jan 2020
Unit No. HEX 07-10/11
Testing Services / Manufacturing
1,953
(L) Dec 2021
1008, Toa Payoh North, Singapore
Unit No. HEX 03-09/17
Manufacturing
6,099
(L) Jan 2020
Unit No. HEX 03-09/17, (ancillary site)
Manufacturing
70
(L) Jan 2020
Unit No. HEX 01-09/10/11
Manufacturing
2,202
(L) Sept 2020
Unit No. HEX 01-15/16
Manufacturing
1,400
(L) Sept 2020
Unit No. HEX 01-08
Manufacturing
603
(L) June 2020
Unit No. HEX 01-12/14
Manufacturing
1,664
(L) July 2022
Lot No. 11A, Jalan SS8/2,
Sungai Way Free Industrial Zone,
47300 Petaling Jaya,
Selangor Darul Ehsan, Malaysia
Testing Services
78,706
(O)
4809-3-35,CBD Perdana 2
Persiaran Flora Cyber 12
63000 Cyberjaya
Manufacturing
2000
(L) May 2020
327, Chalongkrung Road,
Lamplathew, Lat Krabang,
Bangkok 10520, Thailand
Testing Services
34,433
(O)
No. 5, Xing Han Street, Block A
#04-15/16, Suzhou Industrial Park
China 215021
Testing Services
6,200
(L) Jan 2020
B7-2, Xiqing Economic Development Area International Industrial Park
Tianjin City, China 300385
Testing Services
45,940
(L) April 2021
 
 
 
 
ITEM 3 – LEGAL PROCEEDINGS
 
The Company is, from time to time, the subject of litigation claims and assessments arising out of matters occurring in its normal business operations. In the opinion of management, resolution of these matters will not have a material adverse effect on our financial statements.
 
There are no material proceedings to which any director, officer or affiliate of the Company, any beneficial owner of more than five percent of the Company’s Common Stock, or any associate of such person is a party that is adverse, to the Company or its properties.
 
ITEM 4 – MINE SAFETY DISCLOSURES
 
Not applicable.
 
PART II
 
ITEM 5MARKET FOR REGISTRANT'S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES
 
Our Common Stock is traded on the NYSE MKT under the symbol “TRT.”
 
As of September 1, 2019, there were 3,673,055 shares of our Common Stock issued and outstanding, and the Company had approximately 57 record holders of Common Stock. The number of holders of record does not include the number of persons whose stock is in nominee or “street name” accounts through brokers.
 
Dividend Policy
 
We did not declare any cash dividends in either fiscal year 2019 or fiscal year 2018.
 
The determination as to whether to pay any future cash dividends will depend upon our earnings and financial position at that time and other factors as the Board of Directors may deem appropriate. In general, California law prohibits the payment of unless the corporation’s retained earnings prior to the dividend equals or exceeds the dividend or, immediately after payment of the dividends, the corporation’s assets would equal or exceed its total liabilities. There is no assurance that dividends will be paid to holders of Common Stock in the foreseeable future.
 
ITEM 6 - SELECTED FINANCIAL DATA
 
As a smaller reporting company as defined by Rule 12b-2 of the Securities Exchange Act of 1934, we are not required to provide the information required by this item.
 

 
ITEM 7 – MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS (IN THOUSANDS, EXCEPT PERCENTAGES AND SHARE AMOUNTS)
 
The following discussion and analysis should be read in conjunction with our disclaimer on “Forward-Looking Statements,” “Item 1. Business,” and our Consolidated Financial Statements, the notes to those statements and other financial information contained elsewhere in this Annual Report on Form 10-K.
 
During fiscal years 2019 and 2018, Trio-Tech International operated in four segments: manufacturing, testing services, distribution and real estate. In fiscal year 2019, revenue from the manufacturing, testing services, distribution and real estate segments represented 38.0%, 42.8%, 19.0% and 0.2% of our revenue, respectively, as compared to 37.7%, 45.8%, 16.2% and 0.3%, respectively, in fiscal year 2018.
 
Semi-conductor testing and manufacturing (assembly) of test equipment is our core business. We provide third-party semiconductor testing and burn-in services primarily through our laboratories in Asia. At or from our facilities in the U.S. and Asia, we also design, manufacture and market equipment and systems to be used in the testing and production of semiconductors, and distribute semiconductor processing and testing equipment manufactured by other vendors.
 
Our distribution segment operates primarily in Asia. This segment markets and supports distributing complementary products supplied by other manufacturers that are used by its customers and other semiconductor and electronics manufacturers. We believe this will help us to reduce our exposure to multiple risks arising from being a mere distributor of manufactured products from others.
 
The main revenue component for the real estate segment was rental income.
 
No other investment income was recorded as “revenue” by the real estate segment in either of fiscal years 2019 or 2018.
 
The rental income is generated from the rental properties acquired from MaoYe Property Ltd. (“MaoYe”) and Chongqing FuLi Real Estate Development Co. Ltd (“FuLi”) in Chongqing, China. In the second quarter of fiscal 2015, the investment made with JiaSheng Property Development Co. Ltd (“JiaSheng”), which was deemed as loans receivable, was transferred to down payment for purchase of investment property in China.
 
Trio-Tech Chongqing Co., Ltd. (“TTCQ”) invested RMB 5,554 in rental properties in MaoYe during fiscal year 2008, RMB 3,600 in rental properties from JiangHuai Property Development Co. Ltd. (“JiangHuai”) during fiscal year 2010 and RMB 4,025 in rental properties in FuLi during fiscal year 2010. During fiscal year 2019, TTCQ has completed the sale of thirteen of the fifteen units constituting the MaoYe property which contributed a capital gain of $685. The total investment in properties in China was RMB 9,649 and RMB 13,179, or approximately $1,405 and $1,991 in fiscal years 2019 and 2018, respectively. The carrying value of these investment properties in China was RMB 5,367 and RMB 7,583, or approximately $782 and $1,146, in fiscal years 2019 and 2018, respectively. These properties generated a total rental income of $98 and $139 for fiscal years 2019 and 2018, respectively. TTCQ’s investment in properties that generated rental income is discussed further in this Form 10-K.
 
TTCQ has yet to receive the title deed for properties purchased from JiangHuai. TTCQ is in the legal process of obtaining the title deed, which is dependent on JiangHuai completing the entire project. The JiangHuai property did not generate any income during fiscal 2019 and 2018.
 
On October 14, 2014, TTCQ and Jun Zhou Zhi Ye entered into a memorandum of understanding. Based on the memorandum of understanding, both parties agreed to register a sales and purchase agreement upon Jun Zhou Zhi Ye obtaining a license to sell the commercial property (the Singapore Themed Resort Project) located in Chongqing, China. The proposed agreement is for the sale of shop lots with a total area of 1,484.55 square meters as consideration for the outstanding amounts owed to TTCQ by Jun Zhou Zhi Ye as follows:
 
a) Long term loan receivable RMB 5,000, or approximately $814, as disclosed in Note 5, plus the interest receivable on long term loan receivable of RMB 1,250;
b) Commercial units measuring 668 square meters, as mentioned above; and
c) RMB 5,900 as part of the unrecognized cash consideration of RMB 8,000 relating to the disposal of the joint venture.
 
 
 
The consideration does not include the remaining outstanding amount of RMB 2,000, or approximately $326, which will be paid to TTCQ in cash.
  
The shop lots are to be delivered to TTCQ upon completion of the construction of the shop lots in the Singapore Themed Resort Project. The initial targeted date of completion was December 31, 2016. Based on discussions with the developers, the completion date is estimated to be December 31, 2021. The delay was primarily due to the time needed by the developers to work with various parties to inject sufficient funds into this project. Based on the available information, management believes that the developer is capable of working with new investors to complete certain phases of this project.

Fiscal Year 2019 Highlights (in Thousands)
 
Total revenue decreased by $3,163, or 7.5%, to $39,198 in fiscal year 2019 compared to $42,361 in fiscal year 2018.
Manufacturing segment revenue decreased by $1,089, or 6.8%, to $14,889 in fiscal year 2019 compared to $15,978 in fiscal year 2018.
Testing services segment revenue was $16,760 in fiscal year 2019, a decrease of $2,631, or 13.6%, compared to $19,391 in fiscal year 2018.
Distribution segment revenue was $7,451 in fiscal year 2019, an increase of $598 or 8.7%, compared to $6,853 in fiscal year 2018.
Real estate segment revenue decreased by $41, to $98 in fiscal year 2019 compared to $139 in fiscal year 2018.
Overall gross profit margin decreased by 2.1% to 23.0% in fiscal year 2019 compared to 25.1% in fiscal year 2018.
General and administrative expenses decreased by $201, or 2.8%, to $7,049 in fiscal year 2019 compared to $7,250 in fiscal year 2018.
Research and development expenses decreased by $106, from $451 in fiscal year 2018 to $345 in fiscal year 2019.
Gain on disposal of property, plant and equipment was $13 in fiscal year 2019, a decrease of $64 as compared to $77 in fiscal year 2018.
Income from operations was $794 in fiscal year 2019, a decrease of $1,394, as compared to $2,188 in fiscal year 2018.
Income from continuing operations before income taxes was $1,409 in fiscal year 2019, a decrease of $881, as compared to $2,290 in fiscal year 2018.
Other income decreased by $86 to $249 in fiscal year 2019 compared to $335 in fiscal year 2018.
Gain on sale of properties was $685 in fiscal year 2019.
Income tax benefit for fiscal year 2019 was $42 compared to income tax expense of $987 in fiscal year 2018.
Working capital increased by $2,379, or 25.8 %, to $11,607 as of June 30, 2019 compared to $9,228 as of June 30, 2018.
Net income attributable to Trio-Tech International for fiscal year 2019 was $1,545 compared to $1,184 in fiscal year 2018.
Net loss attributable to non-controlling interest for fiscal year 2019 was $97 compared to net income of $106 in fiscal year 2018.
 
The highlights above are intended to identify some of our most significant events and transactions during our fiscal year 2019. However, these highlights are not intended to be a full discussion of our results for the year. These highlights should be read in conjunction with the discussion on these items in Item 7 and with our consolidated financial statements and footnotes accompanying this Annual Report.
 
General Financial Information
 
During the fiscal year ended June 30, 2019, total assets increased by $53 from $36,474 in fiscal year 2018 to $36,527 in fiscal year 2019. The increase was primarily due to an increase in short term deposits, prepaid expenses and other current assets, property, plant and equipment, and restricted term deposits. The increase was partially offset by the decrease in cash and cash equivalents, trade receivables, other receivables, inventories, asset held for sale, deferred tax assets, investment properties and other assets.
 
Cash and cash equivalents at June 30, 2019 were $4,863, a decrease of $1,676, or 25.6%, compared to $6,539 at June 30, 2018. The decrease was mainly due to deposits placed to acquire equipment.
 
Trade accounts receivable at June 30, 2019 was $7,113, representing a decrease of $634, or 8.2%, compared to $7,747 at June 30, 2018. The decrease was attributable to improvement in collection and decrease in sales, especially in the Malaysia and China operations. The number of days’ sales outstanding in accounts receivables was 69 days and 72 days for the fiscal years ended June 30, 2019 and 2018, respectively.
 
 
 
As at June 30, 2019, other receivables were $817, a decrease of $64, or 7.3%, compared to $881 at June 30, 2018. The decrease was primarily due to a decrease in advance payment made by the Company in the Singapore operation. The decrease was partially offset by an increase in contract assets arising from the effect of new accounting standard, ASC 606 Revenue from contracts with customers which became effective in the fiscal year ended June 30, 2019 in China operation.
 
Inventories at June 30, 2019 were $2,427, a decrease of $503, or 17.2%, compared to $2,930 at June 30, 2018. The decrease in inventories was mainly due to the timing of customers’ orders. The number of days’ inventory held was 85 days at the end of fiscal 2019, compared to 70 days at the end of fiscal year 2018. The slower turnover of inventory on hand was mainly due to some delayed shipment as per customers’ requirement in the fiscal year ended June 30, 2019.
 
Assets held for sale in Penang, Malaysia as at June 30, 2019 was $89, compared to $91 at June 30, 2018. Management received an expression of interest from a potential buyer in acquiring the property during second quarter of fiscal year 2019 and the sale was under negotiation with the potential buyer during third quarter of fiscal year 2019. Sales and Purchase Agreement was finalized with the potential buyer during fourth quarter of fiscal year 2019. The completion of the sale is subject to the approval by Penang Development Corporation.
 
Investment properties in China as of June 30, 2019 were $782, a decrease of $364 from $1,146 at June 30, 2018. The decrease was primarily due to the sale of MaoYe investment properties in the fiscal year ended June 30, 2019 for a gain of $685.
 
Property, plant and equipment at June 30, 2019 were $12,159, an increase of $224, compared to $11,935 at June 30, 2018. The increase in property, plant and equipment was mainly due to acquisition of plant and equipment for replacement and new businesses in fiscal year 2019 compared to fiscal year of 2018, and the foreign currency exchange difference between functional currency and U.S. dollars from June 30, 2018 to June 30, 2019. Capital expenditures in fiscal year 2019 increased by $532, to $2,841, as compared to $2,309 for fiscal year 2018. The increase in capital expenditure in the China and Thailand operations was partially offset by the decrease in capital expenditure in the Singapore operation in fiscal year 2019.
 
Other assets at June 30, 2019 were $1,750, a decrease of $499, or 22.2%, compared to $2,249 at June 30, 2018. The decrease in other assets was primarily due to the reclassification of down payments made for the purchase of equipment to property, plant and equipment in the Malaysia and China operations.
 
Restricted term deposits at June 30, 2019 increased by $11, to $1,706 compared to $1,695 at June 30, 2018. The increase was mainly due to fixed deposit interest earned and currency translation difference between functional currency and U.S. dollar from June 30, 2018 to June 30, 2019.
 
Total liabilities at June 30, 2019 were $11,666, a decrease of $1,307, or 10.1%, compared to $12,973 at June 30, 2018. The decrease in liabilities was primarily due to the decrease in lines of credit, accounts payable, income taxes payable and capital leases, but partially offset by the increase in accrued expenses and bank loans payable.
 
Utilized lines of credit as of June 30, 2019 decreased by $1,856 to $187, from to $2,043 as of June 30, 2018. The decrease in lines of credit was mainly due to the repayment made for lines of credit in fiscal year ended June 30, 2019.
 
Accounts payable as of June 30, 2019 decreased by $432 to $3,272 from $3,704 as of June 30, 2018. The decrease was mainly due to the decrease in purchases and more payments released in fiscal year 2019 as compared to fiscal year 2018.
 
Accrued expenses as at June 30, 2019 increased by $314 to $3,486 from $3,172 as at June 30, 2018. The increase was mainly due to an increase in customer deposits received in the China operation.
 
Income Tax Payable as at June 30, 2019 decreased by $257 to $856 from $1,113 as at June 30, 2018. The decrease was mainly due to the repayment made for Income and Repatriation Tax that arose from introduction of Tax Cuts & Jobs Act 2017 in first quarter of fiscal year 2019 and also the reversal made for Repatriation Tax in second and fourth quarter of fiscal year 2019.
 
 
 
-10-
 
Critical Accounting Estimates & Policies
 
The discussion and analysis of the Company’s financial condition presented in this section are based upon our consolidated financial statements, which have been prepared in accordance with generally accepted accounting principles in the U.S. During the preparation of the consolidated financial statements we are required to make estimates and judgments that affect the reported amounts of assets, liabilities, revenue and expenses, and related disclosure of contingent assets and liabilities. On an ongoing basis, we evaluate our estimates and judgments, including those related to sales, returns, pricing concessions, bad debts, inventories, investments, fixed assets, intangible assets, income taxes and other contingencies. We base our estimates on historical experience and on various other assumptions that we believe are reasonable under current conditions. Actual results may differ from these estimates under different assumptions or conditions.
 
In response to the SEC’s Release No. 33-8040, Cautionary Advice Regarding Disclosure about Critical Accounting Policy, we have identified the most critical accounting policies upon which our financial status depends. We determined that those critical accounting policies are related to the inventory valuation, allowance for doubtful accounts, revenue recognition, impairment of property, plant and equipment, investment property and income tax. These accounting policies are discussed in the relevant sections in this management’s discussion and analysis, including the Recently Issued Accounting Pronouncements discussed below.
 
Accounts Receivable and Allowance for Doubtful Accounts
 
During the normal course of business, we extend unsecured credit to our customers in all segments. Typically, credit terms require payment to be made between 30 to 90 days from the date of the sale. We generally do not require collateral from customers. We maintain our cash accounts at credit-worthy financial institutions.
 
The Company’s management considers the following factors when determining the collectability of specific customer accounts: customer credit-worthiness, past transaction history with the customer, current economic industry trends, and changes in customer payment terms. The Company includes any account balances that are determined to be uncollectible, along with a general reserve, in the overall allowance for doubtful accounts. After all attempts to collect a receivable have failed, the receivable is written off against the allowance. Based on the information available to management, the Company believed that its allowance for doubtful accounts was adequate as of June 30, 2019.
 
Inventory Valuation
 
Inventories of our manufacturing and distribution segments consisting principally of raw materials, works in progress, and finished goods are stated at the lower of cost, using the first-in, first-out (“FIFO”) method, or market value. The semiconductor industry is characterized by rapid technological change, short-term customer commitments and swiftly changing demand. Provisions for estimated excess and obsolete inventory are based on regular reviews of inventory quantities on hand and the latest forecasts of product demand and production requirements from our customers. Inventories are written down for not saleable, excess or obsolete raw materials, works-in-process and finished goods by charging such write-downs to cost of sales. In addition to write-downs based on newly introduced parts, statistics and judgments are used for assessing provisions of the remaining inventory based on salability and obsolescence.
 
Property, Plant and Equipment & Investment Property
 
Property, plant and equipment and investment properties are stated at cost, less accumulated depreciation and amortization. Depreciation is provided for over the estimated useful lives of the assets using the straight-line method. Amortization of leasehold improvements is provided for over the lease terms or the estimated useful lives of the assets, whichever is shorter, using the straight-line method.
 
Maintenance, repairs and minor renewals are charged directly to expense as incurred. Additions and improvements to property and equipment are capitalized. When assets are disposed of, the related cost and accumulated depreciation thereon are removed from the accounts and any resulting gain or loss is included in the consolidated statements of operations and comprehensive income or loss.
 

 
-11-
 
Foreign Currency Translation and Transactions
 
The United States dollar (“U.S. dollar”) is the functional currency of the U.S. parent company. The Singapore dollar, the national currency of Singapore, is the primary currency of the economic environment in which the operations in Singapore are conducted. We also have business entities in Malaysia, Thailand, China and Indonesia, of which the Malaysian ringgit (“RM”), Thai baht, Chinese renminbi (“RMB”) and Indonesian rupiah, are the national currencies. The Company uses the U.S. dollar for financial reporting purposes.
 
The Company translates assets and liabilities of its subsidiaries outside the U.S. into U.S. dollars using the rate of exchange prevailing at the balance sheet date, and the statement of operations is measured using average rates in effect for the reporting period. Adjustments resulting from the translation of the subsidiaries’ financial statements from foreign currencies into U.S. dollars are recorded in shareholders' equity as part of accumulated comprehensive income or loss - translation adjustment. Gains or losses resulting from transactions denominated in currencies other than functional currencies of the Company’s subsidiaries are reflected in income for the reporting period.
 
Revenue Recognition
 
On July 1, 2018, the Company adopted Accounting Standards Update (“ASU”) No. 2014-09, ASC Topic 606, Revenue from Contracts with Customers (“ASC Topic 606”). This standard update outlines a single comprehensive model for entities to use in accounting for revenue arising from contracts with customers. We adopted using the modified retrospective method applied to all contracts that were not completed contracts at the date of initial application (i.e. July 1, 2018). Results for reporting periods after July 1, 2018 are presented under ASC Topic 606, while prior period amounts are not adjusted and continue to be reported in accordance with the Company’s historic accounting under ASC Topic 605.
 
We apply a five-step approach as defined in ASC Topic 606 in determining the amount and timing of revenue to be recognized: (1) identifying the contract with customer; (2) identifying the performance obligations in the contracts; (3) determining the transaction price; (4) allocating the transaction price to the performance obligations in the contract; and (5) recognizing revenue when the corresponding performance obligation is satisfied.
 
Revenue derived from testing services is recognized when testing services are rendered. Revenue generated from sale of products in the manufacturing and distribution segments are recognized when persuasive evidence of an arrangement exists, delivery of the products has occurred, customer acceptance has been obtained (which means the significant risks and rewards of ownership have been transferred to the customer), the price is fixedor determinable and collectability is reasonably assured. Certain customers can request for installation and training services to be performed for certain products sold in the manufacturing segment. These services are mainly on helping customers with the test runs of the machines sold and are considered a separate performance obligation. Such services can be provided by other entities as well and these do not significantly modify the product. The Company recognizes the revenue at point in time when the Company has satisfied its performance obligation.
 
In the real estate segment: (1) revenue from property development is earned and recognized on the earlier of the dates when the underlying property is sold or upon the maturity of the agreement; if this amount is uncollectible, the agreement empowers the repossession of the property, and (2) rental revenue is recognized on a straight-line basis over the terms of the respective leases. This means that, with respect to a particular lease, actual amounts billed in accordance with the lease during any given period may be higher or lower than the amount of rental revenue recognized for the period. Straight-line rental revenue is commenced when the tenant assumes possession of the leased premises. Accrued straight-line rents receivable represents the amount by which straight-line rental revenue exceeds rents currently billed in accordance with lease agreements.
 
Joint Venture
 
The Company analyzes its investments in joint ventures to determine if the joint venture is a variable interest entity (a “VIE”) and would require consolidation. The Company (a) evaluates the sufficiency of the total equity at risk, (b) reviews the voting rights and decision-making authority of the equity investment holders as a group, and whether there are any guaranteed returns, protection against losses, or capping of residual returns within the group and (c) establishes whether activities within the venture are on behalf of an investor with disproportionately few voting rights in making this VIE determination. The Company would consolidate a venture that is determined to be a VIE if it was the primary beneficiary. Beginning January 1, 2010, a new accounting standard became effective and changed the method by which the primary beneficiary of a VIE is determined. Through a primarily qualitative approach, the variable interest holder, if any, who has the power to direct the VIE’s most significant activities is the primary beneficiary. To the extent that the joint venture does not qualify as VIE, the Company further assesses the existence of a controlling financial interest under a voting interest model to determine whether the venture should be consolidated.
 
 
 
-12-
 
Equity Method
 
The Company analyzes its investments in joint ventures to determine if the joint venture should be accounted for using the equity method. Management evaluates both Common Stock and in-substance Common Stock as to whether they give the Company the ability to exercise significant influence over operating and financial policies of the joint venture even though the Company holds less than 50% of the Common Stock and in-substance Common Stock. If so, the net income of the joint venture will be reported as “Equity in earnings of unconsolidated joint ventures, net of tax” in the Company’s consolidated statements of operations and comprehensive income or loss.
 
Cost Method
 
Investee companies not accounted for under the consolidation or the equity method of accounting are accounted for under the cost method of accounting. Under this method, the Company’s share of the earnings or losses of such investee companies is not included in the consolidated balance sheet or consolidated statements of operations and comprehensive income or loss. However, impairment charges are recognized in the consolidated statements of operations and comprehensive income or loss. If circumstances suggest that the value of the investee company has subsequently recovered, such recovery is not recorded.
 
Long-Lived Assets & Impairment
 
Our business requires heavy investment in manufacturing facilities and equipment that are technologically advanced but can quickly become significantly under-utilized or rendered obsolete by rapid changes in demand. We have recorded intangible assets with finite lives related to our acquisitions.
 
We evaluate our long-lived assets with finite lives for impairment whenever events or changes in circumstances indicate that the carrying value of such assets may not be recoverable. Factors considered important that could result in an impairment review include significant underperformance relative to expected historical or projected future operating results, significant changes in the manner of use of the assets or the strategy for our business, significant negative industry or economic trends, and a significant decline in our stock price for a sustained period of time. Impairment is recognized based on the difference between the fair value of the asset and its carrying value, and fair value is generally measured based on discounted cash flow analysis, if there is significant adverse change.
 
In our business in the future, we may be required to record impairment charges on our long-lived assets. There was no impairment in fiscal years 2019 and 2018.
 
Fair Value Measurements
 
Under the standard ASC Topic 820, Fair Value Measurements and Disclosures (“ASC Topic 820”), fair value refers to the price that would be received to sell an asset or paid to transfer a liability in an orderly transaction between participants in the market in which the reporting entity transacts its business. ASC Topic 820 clarifies the principle that fair value should be based on the assumptions market participants would use when pricing the asset or liability. In support of this principle, ASC Topic 820 establishes a fair value hierarchy that prioritizes the information used to develop those assumptions. Under the standard, fair value measurements would be separately disclosed by level within the fair value hierarchy.
 
Income Tax
 
We account for income taxes using the liability method in accordance with the provisions of ASC Topic 740, Accounting for Income Taxes (ASC Topic 740”), which requires an entity to recognize deferred tax liabilities and assets. Deferred tax assets and liabilities are recognized for the future tax consequence attributable to the difference between the tax bases of assets and liabilities and their reported amounts in the financial statements, which will result in taxable or deductible amounts in future years. Further, the effects of enacted tax laws or rate changes are included as part of deferred tax expenses or benefits in the period that covers the enactment date. Management believed that it was more likely than not that the future benefits from these timing differences would not be realized. Accordingly, a full allowance was provided as of June 30, 2019 and 2018.
 
The calculation of tax liabilities involves dealing with uncertainties in the application of complex global tax regulations. We recognize potential liabilities for anticipated tax audit issues in the U.S. and other tax jurisdictions based on our estimate of whether, and the extent to which, additional taxes will be due. If the estimate of tax liabilities proves to be less than the ultimate assessment, a further charge to expense would result.
 
 
 
-13-
 
Stock Based Compensation
 
Under ASC Topic 718, Compensation – Stock Compensation (“ASC Topic 718”), stock-based compensation cost is measured at the grant date, based on the estimated fair value of the award using an option pricing model for stock options (Black-Scholes) and market price for restricted stock units, and is recognized as expense over the employee’s requisite service period.
 
Non-controlling Interests in Consolidated Financial Statements
 
We adopted ASC Topic 810, Consolidation (“ASC Topic 810”). This guidance establishes accounting and reporting standards for the non-controlling interest in a subsidiary and for the deconsolidation of a subsidiary. This guidance requires that non-controlling interests in subsidiaries be reported in the equity section of the controlling company’s balance sheet. It also changes the manner in which the net income of the subsidiary is reported and disclosed in the controlling company’s income statement.
 
Loan Receivables
 
The loan receivables are classified as current assets carried at face value and are individually evaluated for impairment. The allowance for loan losses reflects management’s best estimate of probable losses determined principally on the basis of historical experience and specific allowances for known loan accounts. All loans or portions thereof deemed to be uncollectible or to require an excessive collection cost are written off to the allowance for losses.
 
Interest Income
 
Interest income on loans is recognized on an accrual basis. Discounts and premiums on loans are amortized to income using the interest method over the remaining period to contractual maturity. The amortization of discounts into income is discontinued on loans that are contractually 90 days past due or when collection of interest appears doubtful.
 
Recent Accounting Pronouncements
 
The amendments in ASU 2018-18 ASC Topic 808: Collaborative Arrangements: Clarifying the Interaction between Topic 808 and Topic 606 provide more comparability in the presentation of revenue for certain transactions between collaborative arrangement participants. The amendments allow organizations to only present units of account in collaborative arrangements that are within the scope of the revenue recognition standard together with revenue accounted for under the revenue recognition standard. The parts of the collaborative arrangement that are not in the scope of the revenue recognition standard should be presented separately from revenue accounted for under the revenue recognition standard. The amendments are effective for all entities for fiscal years beginning after December 15, 2019, and interim periods within those fiscal years. While early application is permitted, including adoption in an interim period, the Company has not elected to early adopt. The Company is currently evaluating the potential impact of this accounting standard update on its consolidated financial statements.
 
The amendments in ASU 2018-13 ASC Topic 820: Fair Value Measurement: Disclosure Framework—Changes to the Disclosure Requirements for Fair Value Measurement modify the disclosure requirements on fair value measurements based on the concepts in the Concepts Statement, including the consideration of costs and benefits. The amendments on changes in unrealized gains and losses, the range and weighted average of significant unobservable inputs used to develop Level 3 fair value measurements, and the narrative description of measurement uncertainty should be applied prospectively for only the most recent interim or annual period presented in the initial fiscal year of adoption. All other amendments should be applied retrospectively to all periods presented upon their effective date. The amendments are effective for all entities for fiscal years beginning after December 15, 2019, and interim periods within those fiscal years. While early application is permitted, including adoption in an interim period, the Company has not elected to early adopt. The effectiveness of this update is not expected to have a significant effect on the Company’s consolidated financial position or results of operations.
 
 
 
-14-
  
The amendments in ASU 2018-09 Codification Improvements represent changes to clarify, correct errors in, or make minor improvements to the Codification, eliminating inconsistencies and providing clarifications in current guidance. The amendments in this ASU include those made to: Income Statement-Reporting Comprehensive Income-Overall; Debt-Modifications and Extinguishments; Distinguishing Liabilities from Equity-Overall; Compensation-Stock Compensation-Income Taxes; Business Combinations-Income Taxes; Derivatives and Hedging-Overall; Fair Value Measurement-Overall; Financial Services-Brokers and Dealers-Liabilities; and Plan Accounting-Defined Contribution Pension Plans-Investments-Other. The amendments are effective for all entities for annual periods beginning after December 15, 2018, and thus will be effective for the Company for the fiscal year that commenced July 1, 2019 and will end June 30, 2020. The Company has completed the assessment for this update, apart from subtopic 718-740 Compensation-Stock Compensation, other subtopics in this update are not applicable to the Company. The Company has completed the assessment for this update and concluded that the subtopic 718-740 has no significant impact to the Company’s consolidated statements of operations and comprehensive income.
 
The amendments in ASU 2018-02 ASC Topic 220: Income Statement – Reporting Comprehensive Income provide financial statement preparers with an option to reclassify stranded tax effects within Accumulated Other Comprehensive Income to retained earnings in each period in which the effect of the change in the U.S. federal corporate income tax rate in the Tax Cuts and Jobs Act (or portion thereof) is recorded. The amendments in ASC Topic 220 are effective for public business entities for fiscal years beginning after December 15, 2018, and thus will be effective for the Company for the fiscal year that commenced July 1, 2019 and will end June 30, 2020. The Company has completed the assessment and concluded that this update has no significant impact to the Company’s consolidated statements of operations and comprehensive income.
 
The amendments in ASU 2017-11: Earnings Per Share (Topic 260); Distinguishing Liabilities from Equity (Topic 480); Derivatives and Hedging (Topic 815) are effective for public companies for annual periods beginning after December 15, 2018, and thus will be effective for the Company for the fiscal year that commenced July 1, 2019 and will end June 30, 2020. The Company has completed the assessment and concluded that this update has no impact to the Company’s EPS calculation.
 
The amendments in ASU 2017-04 ASC Topic 350: Intangibles - Goodwill and Other (“ASC Topic 350”) simplify the test for goodwill impairment. For public companies, these amendments are effective for annual periods beginning after December 15, 2019, including interim periods within those periods. While early application is permitted, including adoption in an interim period, the Company has not elected to early adopt. The effectiveness of this update is not expected to have a significant effect on the Company’s presentation of consolidated financial position or results of operations.
 
The amendments in ASU 2019-05 ASC Topic 326: Financial Instruments — Credit Losses (“ASC Topic 326”): Targeted Transition Relief is issued to provide option to measure certain types of assets at fair value which allows companies to irrevocably elect, upon adoption of ASU 2016-13, the fair value option on financial instruments that (1) were previously recorded at amortized cost and (2) are within the scope of ASC 326-20 if the instruments are eligible for the fair value option under ASC 825-10. The amendments in ASU 2018-19 ASC Topic 326: Codification Improvements to Financial Instruments – Credit Losses clarify that receivables arising from operating leases are not within the scope of the credit losses standard, but rather, should be accounted for in accordance with the lease’s standard. The amendments in ASU 2016-13 ASC Topic 326: Financial Instruments — Credit losses (“ASC Topic 326”) are issued for the measurement of all expected credit losses for financial assets held at the reporting date based on historical experience, current conditions, and reasonable and supportable forecasts. For public companies that are SEC filers, ASC Topic 326 is effective for fiscal years beginning after December 15, 2019, including interim periods within those fiscal years. While early application will be permitted for all organizations for fiscal years and interim periods within those fiscal years, beginning after December 15, 2018, the Company has not yet determined if it will early adopt. The Company is currently evaluating the potential impact of this accounting standard update on its consolidated financial statements.
 
 
 
-15-
 
In February 2016, the FASB issued an ASU 2016-12 ASC Topic 842: Leases, which amends a number of aspects of the existing accounting standards for leases which require lessees to recognize operating leased assets and corresponding liabilities on the balance sheet for all leases with lease terms of more than 12 months. In July 2018, ASU 2018-10: Codification Improvements to Leases addressed stakeholders’ questions about how to apply certain aspects of the new guidance in Accounting Standards Codification (ASC) 842: Leases. The clarifications address the rate implicit in the lease, impairment of the net investment in the lease, lessee reassessment of lease classification, lessor reassessment of lease term and purchase options, variable payments that depend on an index or rate and certain transition adjustments. Besides, the amendments in ASU 2018-11 ASC Topic 842: Leases: Targeted Improvements related to transition relief on comparative reporting at adoption affect all entities with lease contracts that choose the additional transition method and separating components of a contract affect only lessors whose lease contracts qualify for the practical expedient. In July 2018, the amendments in ASU 2018-20 ASC Topic 842: Leases: Narrow-Scope Improvements for Lessors addressed the following issues facing lessors when applying this lease standard: (1) sales taxes and other similar taxes collected from lessees, (2) certain lessor costs and (3) recognition of variable payments for contracts with lease and non-lease components. On March 5, 2019, ASU 2019-01 issued to exempt both lessees and lessors from having to provide certain interim disclosures in the fiscal year in which a company adopts the new leases standard. The amendments are effective for all entities for fiscal years beginning after December 15, 2018, and thus will be effective for the Company for the fiscal year that commenced July 1, 2019 and will end June 30, 2020. The Company will adopt these standards starting in the first quarter of fiscal year 2020 on a modified retrospective approach at the beginning of the period through a cumulative-effect adjustment. The Company has completed its preliminary impact evaluation of the new lease accounting standard on its consolidated financial statement and expects to recognize new right-of-use assets and lease liabilities of approximately $790 to $840 on the consolidated balance sheet. The Company does not expect the change to have a material impact on the consolidated statements of income and the consolidated statements of cash flows. Further, upon adoption, the Company will expand its financial statement disclosures to present additional details of its leasing arrangements.
 
Other new pronouncements issued but not yet effective until after June 30, 2019 are not expected to have a significant effect on the Company’s consolidated financial position or results of operations.
 
Comparison of Operating Results
 
The following table presents certain data from the consolidated statements of operating income as a percentage of net sales for the fiscal years ended June 30, 2019 and 2018:
 
 
 
For the Year Ended June 30,
 
 
 
2019
 
 
2018
 
Revenue
  100.0%
  100.0%
Cost of sales
  77.0 
  74.9 
Gross Margin
  23.0%
  25.1%
Operating expenses:
    
    
General and administrative
  18.0%
  17.1%
Selling
  2.1 
  1.9 
Research and development
  0.9 
  1.1 
Gain on disposal of property, plant and equipment
  - 
  (0.2)
Total operating expenses
  21.0%
  19.9%
Income from Operations
  2.0%
  5.2%
 
 
 
-16-
 
Overall Revenue
 
The overall revenue is composed of the revenues from the manufacturing, testing services, distribution and real estate segments. The following table presents the components of the overall revenue realized in fiscal years 2019 and 2018 in percentage format, respectively.
 
 
 
For the Year Ended June 30,
 
 
 
2019
 
 
2018
 
Manufacturing
  38.0%
  37.7%
Testing
  42.8 
  45.8 
Distribution
  19.0 
  16.2 
Real estate
  0.2 
  0.3 
Total
  100.0%
  100.0%
 
    
    
Revenue in fiscal year 2019 was $39,198, a decrease of $3,163 or 7.5%, compared to $42,361 in fiscal year 2018. The decrease in revenue was due to a decrease in sales across all segments except the distribution segment.
 
As a percentage of total revenue, the revenue generated by the manufacturing segment in fiscal year 2019 accounted for 38.0%, an increase of 0.3%, as compared to 37.7% in fiscal year 2018. In terms of dollar amount, the revenue generated by the manufacturing segment in fiscal year 2019 was $14,889, reflecting a decrease of $1,089, or 6.8%, compared to $15,978 in fiscal year 2018. The decrease in revenue generated by the manufacturing segment was due to a decrease in the manufacturing segment in the China operation and the U.S. operation as a result of lower demand for capital expenditure by our customers in these two operations. The decreases were partially offset by an increase in the manufacturing segment in the Singapore operation as a result of higher demand for capital expenditure by our customers in that operation.
 
Backlog in the manufacturing segment was $4,210 as of June 30, 2019, representing a decrease of $114 from $4,324 as of June 30, 2018. We expect the demand for our products to increase at a slower pace in fiscal year 2020 as compared to fiscal year 2019, depending on the global market for testing equipment and systems amid the trade tension between United State and China, the two largest economies in the world.
 
As a percentage of total revenue, the revenue generated by the testing services segment in fiscal year 2019 accounted for 42.8% of total sales, a decrease of 3.0% compared to 45.8% in fiscal year 2018. In terms of dollar amounts, the revenue generated by the testing services segment for fiscal year 2019 was $16,760, reflecting a decrease of $2,631, compared to $19,391 for fiscal year 2018. The decrease in revenue generated by the testing segment was primarily attributable to a decrease in Malaysia and China operations. The decrease in the Malaysia and China operations were due to a decrease in volume of testing services requested by our customers. These decreases were partially offset by the increase in revenue as a result of higher volume in the Singapore, and Thailand operations during fiscal year 2019. Demand for testing services varies from country to country depending on changes taking place in the market and our customers’ forecasts. Because it is difficult to accurately forecast fluctuations in the market, we believe that it is necessary to maintain testing facilities in close proximity to our customers in order to make it convenient for them to send us their newly manufactured parts for testing and to enable us to maintain a share of the market.
 
Backlog in the testing services segment as of June 30, 2019 was $4,292, a decrease of $635 as compared to $4,927 at June 30, 2018. The decrease in backlog was mainly from the Malaysia and China operations. The backlog depends on the estimates volume provided by customers, which are in turn dependent upon the customers’ inventory levels and demand.
 
As a percentage of total revenue, the revenue generated by the distribution segment in fiscal year 2019 accounted for 19.0% of total sales, an increase of 2.8% compared to 16.2% in fiscal year 2018. In terms of dollar amounts, revenue for fiscal year 2019 was $7,451, an increase of $598, or 8.7%, compared to $6,853 for fiscal year 2018. The increase of revenue in our distribution segment was due to the increase in orders for certain products from customers in our Singapore and China operations. This increase was partially offset by a decrease in orders in the Malaysia operation.
 
 
 
-17-
 
Backlog in the distribution segment as of June 30, 2019 was $1,494, reflecting a decrease of $1,287 compared to the backlog of $2,781 at June 30, 2018. The decrease in backlog was mainly due to a decrease in demands from customers as a result of the slowing economic environment. We believe that our competitive advantage in the distribution segment is our design and engineering capabilities in components and touch screen products, which allow customization to meet the specific requirement of our customers. Product volume for the distribution segment depends on sales activities such as placing orders and queries for products and backlog. Equipment and electronic component sales are very competitive, as the products are readily available in the market.
 
As a percentage of total revenue, the revenue generated by the real estate segment was 0.2% of total sales in fiscal year 2019 and 0.3% of total sales in fiscal year 2018. In terms of dollar value, revenue for fiscal year 2019 was $98, a decrease of $41, or 29.5%, compared to $139 for fiscal year 2018. Our real estate segment saw a decrease in rental income due to the sale of a majority of the MaoYe properties in fiscal year 2019.
 
Backlog in the real estate segment as of June 30, 2019 was $153, a decrease of $140 as compared to $293 at June 30, 2018.
 
Overall Gross Margin
 
Overall gross margin as a percentage of revenue was 23.0% in fiscal year 2019, a decrease of 2.1% compared to 25.1% in fiscal year 2018. The decrease in gross margin as a percentage of revenue was mainly attributable to the manufacturing and testing segments. In terms of dollar value, the overall gross profit for fiscal year 2019 was $9,001, a decrease of $1,637, or 2.1%, compared to $10,638 for fiscal year 2018. The decrease in the dollar value of overall gross margin was mainly due to the decrease of sales in the manufacturing and testing segments, which was partially offset by an increase of sales in the distribution segment.
 
The gross margin as a percentage of revenue in the manufacturing segment was 23.5% in fiscal year 2019, remained comparable with 23.6% in fiscal year 2018. In terms of dollar amounts, the gross profit for the manufacturing segment in fiscal year 2019 was $3,496, a decrease of $269, or 7.1%, compared to $3,765 in fiscal year 2018. The decrease in absolute dollar amount of gross margin was mainly due to a decrease in revenue in our Singapore, U.S. and China operations.
 
The gross margin as a percentage of revenue in the testing services segment was 27.2% in fiscal year 2019, a decrease of 4.1% compared to 31.3% in fiscal year 2018. In terms of dollar amounts, gross profit in the testing services segment in fiscal year 2019 was $4,558, a decrease of $1,510, or 24.9%, compared to $6,068 in fiscal year 2018. The decrease in gross profit margin was primarily due to the decrease in revenue brought about by a decrease in orders in the China and Malaysia operations. A significant portion of our cost of goods sold is fixed in the testing segment. Thus, as the demand for services and factory utilization decreases, the fixed costs are spread over the decrease output, which will decrease the gross profit margin. The negative impact on gross profit margin was partially offset by the effort of cost saving in the China and Malaysia operations.
 
The gross margin as a percentage of revenue in the distribution segment was 12.7% in fiscal year 2019, an increase of 1.2% compared to 11.5% in fiscal year 2018. The increase in gross margin percentage was due to the increase of sales and a change in the product mix. The distribution segment had more sales of products with a higher profit margin compared to the same period of last fiscal year. In terms of dollar amounts, gross profit in the distribution segment was $946, an increase of $161, or 20.5%, compared to $785 in fiscal year 2018. The gross margin of the distribution segment was not only affected by the market price of our products, but also our product mix, which changed frequently as a result of the changes in market demand.
 
The gross margin as a percentage of revenue in the real estate segment was 1% in fiscal year 2019, a deterioration of 13.4% compared to a gross margin of 14.4% in fiscal year 2018. In absolute dollar amount, gross margin in the real estate segment was $1 in fiscal year 2019, a decrease of $19, as compared to a gross margin of $20 in fiscal year 2018. The decrease was due to a decrease in revenue from MaoYe properties due to sales of a majority of the properties in fiscal year 2019 as discussed earlier.
  
 
 
 
-18-
 
Operating Expenses
 
Operating expenses for the fiscal years ended June 30, 2019 and 2018 were as follows:
 
 
 
For the Year Ended June 30,
 
 
 
2019
 
 
2018
 
General and administrative
 $7,049 
 $7,250 
Selling
  826 
  826 
Research and development
  345 
  451 
Gain on disposal of property, plant and equipment
  (13)
  (77)
Total
 $8,207 
 $8,450 
 
General and administrative expenses decreased by $201, or 2.8%, from $7,250 in fiscal year 2018 to $7,049 in fiscal year 2019. The decrease was mainly attributable to a decrease in payroll related and bonus expenses in the Malaysia, China and U.S. operations, and a decrease in professional expenses in the Malaysia operations. These decreases were partially offset by an increase in medical expenses in the Singapore operations.
 
Research and development expenses were $345 and $451 in fiscal year 2019 and 2018, respectively, reflecting a decrease of $106 or 23.5%. The decrease was mainly due to a decrease of expenses in the China operation. The China operation did not incur any research and development expenses in fiscal year 2019 whereas there was a one-off research and development project in fiscal year 2018.
 
During fiscal year 2019, there was a gain in disposal of property, plant and equipment amounting to $13, as compared to a gain on disposal of $77 in fiscal year 2018. The disposal of property, plant and equipment is a part of routine operational review of assets during the fiscal year 2019, resulting in a gain.
 
Income from Operations
 
Income from operations was $794 in fiscal year 2019, a decrease of $1,394, as compared to $2,188 in fiscal year 2018. The decrease was mainly due to a decrease in revenue resulting in a decrease in gross margin which was partially offset by the decrease in operating expenses, as discussed earlier.
 
Interest Expenses
 
The interest expenses for fiscal years 2019 and 2018 were as follows:
 
 
 
For the Year Ended June 30,
 
 
 
2019
 
 
2018
 
Interest expenses
 $319 
 $233 
 
Interest expenses increased by $86, or 36.9%, to $319 in fiscal year 2019 from $233 in fiscal year 2018. The increase in interest expenses was mainly due to Malaysia operation has taken up new bank loan in funding for operation and potential investment purposes in fiscal year 2019.
 
 Other Income, Net
 
Other income, net for fiscal years 2019 and 2018 was as follows:
 

 
For the Year Ended June 30,
 

 
2019
 
 
2018
 
Interest income
 $100 
 $50 
Other rental income
  113 
  110 
Exchange loss
  (135)
  (160)
Government Grants
  77 
  126 
Bad debt recovery
  2 
  - 
Other miscellaneous income
  92 
  209 
Total
 $249 
 $335 
 
 
 
-19-
 
Other income decreased by $86 to $249 for fiscal year 2019 as compared to $335 for fiscal year 2018. The decrease in other income in fiscal year 2019 was mainly due to decrease in receipt of government grants and other miscellaneous income. These decreases were partially offset by an increase in interest income and decrease in foreign exchange loss.
 
Gain on sale of properties
 
During the first quarter of 2019, management decided to sell MaoYe Property, which is one of our earlier investment properties, In order to monetize the capital gain on property, TTCQ appointed a sole agent for 6 months as of September 1, 2018 to search for suitable buyers for this property. TTCQ has completed the sale of thirteen of the fifteen units constituting the MaoYe property which sale resulted in a gain of $685. During third quarter 2019, considering the current market condition in China, management has decided not to sell the remaining two units of MaoYe properties and the properties were reclassified to investment property from assets held for sale.
 
Income Tax Benefits/Expenses
 
Income tax benefits for fiscal year 2019 were $42, as compared to income tax expense of $987 for fiscal year 2018. A change of $1,029 was mainly due to the provision for repatriation tax of $900 made in fiscal year 2018. The provision for income taxes for the year ended June 30, 2019 includes a $145 decrease from the completion of our provisional accounting for the effects of the Tax Act under SAB 118 and a $192 decrease from utilization of the Company’s Net Operating Loss and allowable tax credit. The decrease is associated with the one-time mandatory repatriation tax of certain post-1986 earnings and profits that were deferred from U.S. taxation by the Company’s foreign subsidiaries.
 
At June 30, 2019, the Company had no federal net operating loss carry-forwards and state net operating loss carry forward of $867, which expire through 2038. These carryovers may be subject to limitations under I.R.C. Section 382. The Company also had tax credit carry-forward of approximately $49 for U.S. federal income tax purposes expiring through 2020. Management of the Company is uncertain whether it is more likely than not that these future benefits will be realized. Accordingly, a full valuation allowance was established.
 
Loss from Discontinued Operations
 
Loss from discontinued operations was $3 in fiscal year 2019, as compared to $13 in fiscal year 2018. The loss was attributable to currency translation effect in the discontinued operations. We discontinued our fabrication segment in fiscal year 2013.
 
Non-controlling Interest
 
As of June 30, 2019, we held an indirect 55% interest each in Trio-Tech (Malaysia) Sdn. Bhd. (“TTM”), Trio-Tech (Kuala Lumpur) Sdn. Bhd. (“TTKL”), SHI and PT SHI, and a 76% interest in Prestal Enterprise Sdn. Bhd. (“Prestal”). The non-controlling interest for fiscal year 2019, in the net loss of subsidiaries, was $97, a change of $203 compared to the non-controlling interest in the net income of $106 for the previous fiscal year. The change in the non-controlling interest was primarily attributable to the net loss generated by the Malaysia operations in fiscal year 2019, as compared to net profit generated by the Malaysia operation in the previous fiscal year.
 
Net Income Attributable to Trio-Tech International Common Shareholders
 
Net income for fiscal year 2019 was $1,545, an increase of $361, as compared to $1,184 for fiscal year 2018. The increase in net income during fiscal year 2019 was mainly due to the gain on the sale of MaoYe properties and a decrease in tax expenses. These were partially offset by the decrease in gross profit as discussed earlier.
 
Earnings per Share
 
Basic earnings per share from continuing operations was $0.42 in fiscal year 2019, as compared to $0.34 in fiscal year 2018. Basic loss per share from discontinued operations was $nil for fiscal year 2019 and 0.01 for fiscal year 2018.
 
Diluted earnings per share from continuing operations was $0.41 in fiscal year 2019, as compared to $0.32 in fiscal year 2018. Diluted loss per share from discontinued operations was $nil for fiscal year 2019 and 0.01 for fiscal year 2018.
  
 
 
-20-
 
Segment Information
 
The revenue, gross margin and income or loss from each segment for fiscal years 2019 and 2018 are presented below. As the segment revenue and gross margin have been discussed in the previous section, only the comparison of income or loss from operations is discussed below.
 
Manufacturing Segment
 
The revenue, gross margin and income from operations for the manufacturing segment for fiscal years 2019 and 2018 were as follows:
 
 
 
For the Year Ended June 30,
 
 
 
2019
 
 
2018
 
Revenue
 $14,889 
 $15,978 
Gross margin
  23.5%
  23.6%
Income from operations
 $575 
 $548 
 
Income from operations in the manufacturing segment was $575 in fiscal year 2019, an increase of $27, as compared to $548 in fiscal year 2018. The increase was attributable to a decrease in operating expenses. Operating expenses were $2,921 and $3,217 for fiscal years 2019 and 2018, respectively. The decrease in operating expenses was mainly due to a decrease in research & development expenses and corporate overhead allocation, which are allocated on a pre­determined fixed charge basis.
 
Testing Services Segment
 
The revenue, gross margin and income from operations for the testing services segment for fiscal years 2019 and 2018 were as follows:
 
 
 
For the Year Ended June 30,
 
 
 
2019
 
 
2018
 
Revenue
 $16,760 
 $19,391 
Gross margin
  27.2%
  31.3%
(Loss)/Income from operations
 $(164)
 $1,522 
 
Loss from operations in the testing services segment in fiscal year 2019 was $164, a change of $1,686 compared to operation income of $1,522 in fiscal year 2018. The decrease in operating income was attributable to a decrease in revenue by $2,631, a decrease in gross margin of $1,510 and an increase in operating expense of $176. Operating expenses were $4,722 and $4,546 for fiscal years 2019 and 2018, respectively. The increase in operating expenses was mainly attributable to an increase in selling expenses, research and development expenses and corporate overheads.
 
Selling expenses increased due to higher travelling expenses incurred in the Singapore operations. The increase in corporate overhead expenses was due to an increase in the corporate overhead allocation, which are allocated on a predetermined fixed charge basis. These increases were partially offset by a decrease in general and administrative expenses. Decrease in general and administrative expenses was mainly due to decrease of manpower expenses in the China operation.
 
Distribution Segment
 
The revenue, gross margin and income from operations for the distribution segment for fiscal years 2019 and 2018 were as follows:
 
 
For the Year Ended June 30,
 
 
 
2019
 
 
2018
 
Revenue
 $7,451 
 $6,853 
Gross margin
  12.7%
  11.5%
Income from operations
 $598 
 $475 
 
 
 
-21-
 
Income from operations in the distribution segment was $598 in fiscal year 2019 as compared to $475 in fiscal year 2018. The increase was mainly due to the increase in revenue by $598 and an increase in gross margin of $161, as discussed earlier. These increases were partly offset by increase in operating expenses. Operating expenses were $348 and $310 for fiscal years 2019 and 2018, respectively. The increase in selling expenses and general and administrative expenses contributed to the increase in operating expenses. Increased selling expenses were due to increase in commissionable sales.
 
Real Estate
 
The revenue, gross margin and loss from operations for the real estate segment for fiscal years 2019 and 2018 were as follows:
 
 
 
For the Year Ended June 30,
 
 
 
2019
 
 
2018
 
Revenue
 $98 
 $139 
Gross margin
  1%
  14.4%
Loss from operations
 $(92)
 $(56)
Gain on sale of properties
  685 
  - 
 
Loss from operations in the real estate segment increased by $36 to $92 in fiscal year 2019 as compared to $56 in fiscal year 2018. The increase in operating loss was primarily due to the decrease in revenue of $41 and the decrease in gross margin of $19, as discussed earlier. The increase in operating expenses of $16 generated further operation loss. Operating expenses were $92 and $76 for fiscal years 2019 and 2018, respectively. There was other income arising from gain on sale of properties amounting to $685 in fiscal year 2019.
 
Corporate
 
The following table presents the loss from operations for Corporate for fiscal years 2019 and 2018, respectively:
 
 
 
For the Year Ended June 30,
 
 
 
2019
 
 
2018
 
Loss from operations
 $(123)
 $(301)
 
In fiscal year 2019, corporate operating loss was $123, a change of $178 compared to an operating loss of $301 in fiscal year 2018. The decrease was mainly due to a decrease in staff related expenses.
 
Liquidity
 
The Company’s core businesses testing services, manufacturing and distribution, operate in a volatile industry, in which its average selling prices and product costs are influenced by competitive factors. These factors create pressures on sales, costs, earnings and cash flows, which impact liquidity.  
 
Net cash provided by operating activities increased by $53 to $4,454 for the twelve months ended June 30, 2019 from $4,401 in the same period of the last fiscal year.
 
Net cash used in investing activities increased by $3,361 to an outflow of $5,340 for the twelve months ended June 30, 2019, from an outflow of $1,979 for the same period of last fiscal year. The increase in net cash used in investing activities was primarily due to an increase of $3,164 from investments in restricted and unrestricted deposits due to uplift of deposits and an increase of $532 for acquisition of plant and equipment. This increase was partially offset by an increase in cash inflow of $943 from non-recurring sales proceed received from the sale of properties.
 
Net cash used in financing activities for the twelve months ended June 30, 2019 was $590, representing a decrease of $417 compared to $1,007 net cash used in financing activities during the twelve months ended June 30, 2018. Cash inflow increased mainly due to an increase in proceeds from bank loans and capital lease by $1,211 and exercising stock options of $350 and a decrease in repayment of bank loans and capital leases by $46. The decrease in cash outflow was partially offset by an increase in cash outflow of $1,254 from repayment of lines of credit.
 
 
 
-22-
 
We believe that our projected cash flows from operations, borrowing availability under our revolving lines of credit, cash on hand, trade credit and the secured bank loans will provide the necessary financial resources to meet our projected cash requirements for at least the next 12 months. Should we find an attractive capital investment, we may seek additional debt or equity financing in order to fund the transaction, in the form of bank financing, convertible debt, or the issuance of Common Stock.
 
Capital Resources
 
Our working capital (defined as current assets minus current liabilities) has historically been generated primarily from the following sources: operating cash flow, availability under our revolving line of credit, and short-term loans. The working capital was $11,607 as of June 30, 2019, representing an increase of $2,379, or 25.8%, compared to working capital of $9,228 as of June 30, 2018. The increase in working capital was mainly due to increases in current assets such as short-term deposits and prepaid expenses and other current assets and decreases in current liabilities such as, lines of credit and accounts payable. Such fluctuations were partially offset by decreases in current assets such as cash and cash equivalents, accounts receivable, inventories and assets held for sale and increases in current liabilities such as accrued expenses as discussed above.
 
The majority of our capital expenditures are based on demands from our customers, as we are operating in a capital-intensive industry. Our capital expenditures were $2,841 and $2,309 for fiscal year 2019 and fiscal year 2018, respectively. The capital expenditures in fiscal year 2019 were mainly in the China and Thailand operations, which provide testing services to our customers. We financed our capital expenditures and other operating expenses through operating cash flows and long-term debts.
 
Our credit rating provides us with ready and adequate access to funds in the global market. At June 30, 2019, we had available unused lines of credit totaling $5,888.
 
Entity with
Type of
Interest
 
Expiration
 
 
Credit
 
 
Unused
 
 
  Facility
 
 
Facility
 
 
Rate
 
 
Date
 
 
Limitation
 
 
Credit
 
Trio-Tech International Pte. Ltd., Singapore
Lines of Credit
Ranging from 1.85% to 5.5%
  - 
 $4,213 
 $4,213 
Trio-Tech (Tianjin) Co., Ltd.
Lines of Credit
5.22% to 6.3%
  - 
 $1,492 
 $1,492 
Universal (Far East) Pte. Ltd.
Lines of Credit
Ranging from 1.85% to 5.5%
  - 
 $370 
 $183 
 
As of June 30, 2018, the Company had certain lines of credit that are collateralized by restricted deposits.
 
Entity with
Type of
Interest
 
Expiration
 
 
Credit
 
 
Unused
 
 
Facility
 
 
Facility
 
 
Rate
 
 
Date
 
 
Limitation
 
 
Credit
 
Trio-Tech International Pte. Ltd., Singapore
Lines of Credit
Ranging from 1.6% to 5.5%
  - 
 $4,183 
 $3,325 
Trio-Tech (Tianjin) Co., Ltd.
Lines of Credit
5.22%
  - 
 $1,511 
 $1,437 
Universal (Far East) Pte. Ltd.
Lines of Credit
Ranging from 1.6% to 5.5%
  - 
 $367 
 $256 
 
 
On January 4, 2018, Trio-Tech International Pte. Ltd. signed an agreement with a bank to sub-allocate a portion of the facility thereafter to its subsidiary - Universal (Far East) Pte. Ltd. for an Accounts Payable Financing facility with the bank for SGD 500, or approximately $367 based on the market exchange rate. Interest is charged at 1.85% to 5.5%. The financing facility was set up to facilitate the working capital in our operations in Singapore. The Company started to use this facility in fiscal year 2018.
 
Off-Balance Sheet Arrangements
 
We do not consider the Company to have any off-balance sheet arrangements that have or are reasonably likely to have a current or future effect on our financial condition, changes in financial condition, revenues or expenses, results of operations, liquidity, capital expenditures or capital resources.
 
 
 
-23-
 
ITEM 7A – QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK
 
As a smaller reporting company as defined by Rule 12b-2 of the Securities Exchange Act of 1934, we are not required to provide the information required by this item.
 
ITEM 8 - FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA
 
The information called for by this item is included in the Company's consolidated financial statements beginning on page F-2 of this Annual Report on Form 10-K.
 
ITEM 9 – CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE
 
None.
 
ITEM 9A – CONTROLS AND PROCEDURES
 
An evaluation was carried out by the Company’s Chief Executive Officer and Chief Financial Officer (the principal executive and principal financial officers, respectively, of the Company) of the effectiveness of the Company’s disclosure controls and procedures (as defined in Rule 13a-15(e) or 15d-15(e) promulgated under the Securities Exchange Act of 1934, as amended) as of June 30, 2019, the end of the period covered by this Form 10-K. Based upon that evaluation, the Chief Executive Officer and Chief Financial Officer concluded that the Company’s disclosure controls and procedures were effective as of June 30, 2019.
 
Additionally, management has the responsibility for establishing and maintaining adequate internal control over financial reporting for the Company and thus also assessed the effectiveness of our internal controls over financial reporting as of June 30, 2019. Management used the framework set forth in the report entitled “Internal Control – Integrated Framework” published by the Committee of Sponsoring Organizations of the Treadway Commission in 2013 to evaluate the effectiveness of the Company’s internal control over financial reporting.
 
Internal control over financial reporting refers to the process designed by, or under the supervision of, our Chief Executive Officer and Chief Financial Officer, and effected by our Board of Directors, management and other personnel, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purpose in accordance with U.S. generally accepted accounting principles, and includes those policies and procedures that:
 
1.
Pertain to the maintenance of records that in reasonable detail accurately and fairly reflect the transactions and dispositions of the assets of the Company;
2.
Provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with U.S. generally accepted accounting principles, and that receipts and expenditures of the Company are being made only in accordance with authorization of management and directors of the Company; and
3.
Provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, and use or disposition of the Company’s assets that could have a material effect on the financial statements.
 
Internal control over financial reporting cannot provide absolute assurance of achieving financial reporting objectives because of its inherent limitations. Internal control over financial reporting is a process that involves human diligence and compliance and is subject to lapses in judgment and breakdowns resulting from human failures. Internal control over financial reporting also can be circumvented by collusion or improper management override. Because of such limitations, there is a risk that material misstatements may not be prevented or detected on a timely basis by internal control over financial reporting. However, these inherent limitations are known features of the financial reporting process. Therefore, it is possible to design into the process safeguards to reduce, though not eliminate, the risk.
 
Based on that evaluation, the Chief Executive Officer and Chief Financial Officer concluded that the Company’s internal controls over financial reporting were effective as of June 30, 2019.
 
 
 
-24-
  
Changes in Internal Control Over Financial Reporting
 
Except as discussed below, there has been no change in the Company’s internal control over financial reporting during the fourth quarter of Fiscal 2019, which were identified in connection with management’s evaluation required by paragraph (d) of rules 13a-15 and 15d-15 under the Exchange Act, that have materially affected, or are reasonably likely to materially affect, the Company’s internal control over financial reporting.
 
Enterprise Resource Planning (ERP) Implementation
 
We are in the process of implementing an ERP System, as part of a multi-year plan to integrate and upgrade our systems and processes. The implementation of this ERP system is scheduled to occur in phases over a few years, and began with the migration of certain of our operational and financial systems in our Singapore operations to the new ERP system during the second quarter of fiscal 2017. During the third quarter of fiscal 2018, the operational and financial systems in Singapore were substantially transitioned to the new system.
 
This implementation effort continued in fiscal 2019. The operational and financial systems in our Malaysia operation were substantially transitioned to the new system during the first quarter of fiscal 2019.
 
As a phased implementation of this system occurs, we are experiencing certain changes to our processes and procedures which, in turn, result in changes to our internal control over financial reporting. While we expect the new ERP system to strengthen our internal financial controls by automating certain manual processes and standardizing business processes and reporting across our organization, management will continue to evaluate and monitor our internal controls as processes and procedures in each of the affected areas evolve.
 
Adoption of New Revenue Recognition Accounting Standard
 
In the first quarter of fiscal 2019, we implemented controls relating to adoption of the new revenue recognition accounting standards that were adopted in fiscal 2019 to ensure that the revenue contracts, and related policies and process flows were sufficiently reviewed to identify adoption impacts.
 
ITEM 9B – OTHER INFORMATION
 
None.
 
 
 
-25-
 
PART III
 
The information required by Items 10 through 14 of Part III of this Form 10-K (information regarding our directors and executive officers, executive compensation, security ownership of certain beneficial owners, management, related stockholder matters, and certain relationships and related transactions and principal accountant fees and services, respectively) is hereby incorporated by reference from the Company's Proxy Statement to be filed with the Securities and Exchange Commission within 120 days after the end of fiscal year 2019.
 
 
PART IV
 
ITEM 15 – EXHIBITS AND FINANCIAL STATEMENT SCHEDULES
 
(a) (1 and 2)     FINANCIAL STATEMENTS AND SCHEDULES:
 
The following financial statements, including notes thereto and the independent auditors' report with respect thereto, are filed as part of this Annual Report on Form 10-K, starting on page 34 hereof:
 
1.
Report of Independent Registered Public Accounting Firm
2.
Consolidated Balance Sheets
3.
Consolidated Statements of Operations and Comprehensive Income (Loss)
4.
Consolidated Statements of Shareholders' Equity
5.
Consolidated Statements of Cash Flows
6.
Notes to Consolidated Financial Statements
 
(b) The exhibits filed as part of this Annual Report on Form 10K are set forth on the Exhibit Index immediately preceding such exhibits, and are incorporated herein by reference.
 
ITEM 16 – FORM 10-K SUMMARY
 
Not applicable.
 
 
 
 
 
-26-
 
SIGNATURES
 
Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the Registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.
 
 
TRIO-TECH INTERNATIONAL
 
By: /s/ Victor H.M. Ting
VICTOR H.M. TING
Vice President and
 Chief Financial Officer
 
September 23, 2019
  
 
Pursuant to the requirement of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the Registrant and in the capacity and on the dates indicated.
 
 
/s/ A. Charles Wilson
A. Charles Wilson, Director
Chairman of the Board
September 23, 2019
 
 
/s/ S.W.Yong
S. W. Yong, Director
President, Chief Executive Officer
(Principal Executive Officer)
September 23, 2019
 
 
/s/ Victor H. M. Ting
Victor H.M. Ting, Director
Vice President,
and Chief Financial Officer
 (Principal Financial Officer)
September 23, 2019
 
 
/s/ Jason T. Adelman
Jason T. Adelman, Director
September 23, 2019
 
 
/s/ Richard M. Horowitz
Richard M. Horowitz, Director
September 23, 2019
 
 

 
 
-27-
 
EXHIBITS:
 
Number
Description
 
 
3.1
Articles of Incorporation, as currently in effect. [Incorporated by reference to Exhibit 3.1 to the Registrant’s Annual Report on Form 10-K for June 30, 1988.]
3.2
Bylaws, as currently in effect. [Incorporated by reference to Exhibit 3.2 to the Registrant’s Annual Report on Form 10-K for June 30, 1988.]
Amendment to 2007 Employee Stock Option Plan [Incorporated by reference to Exhibit A to the Registrant’s Proxy Statement for its Annual Meeting held December 14, 2010.]**
Amendment to 2007 Directors Equity Incentive Plan [Incorporated by reference to Exhibit B to the Registrant’s Proxy Statement for its Annual Meeting held December 14, 2010.]**
Amendment to 2007 Directors Equity Incentive Plan [Incorporated by reference to Appendix A to the Registrant’s Proxy Statement for its Annual Meeting held December 9, 2013.]**
2017 Employee Stock Option Plan [Incorporated by reference to Appendix 1 to the Registrant’s Proxy Statement for its Annual Meeting held December 4, 2017.]**
2017 Directors Equity Incentive Plan [Incorporated by reference to Appendix 2 to the Registrant’s Proxy Statement for its Annual Meeting held December 4, 2017.]**
21.1
Subsidiaries of the Registrant (100% owned by the Registrant except as otherwise stated)
Express Test Corporation (Dormant), a California Corporation
Trio-Tech Reliability Services (Dormant), a California Corporation
KTS Incorporated, dba Universal Systems (Dormant), a California Corporation
European Electronic Test Center. Ltd., a Cayman Islands Corporation (Operation ceased on November 1, 2005)
Trio-Tech International Pte. Ltd., a Singapore Corporation
Universal (Far East) Pte. Ltd., a Singapore Corporation
Trio-Tech International (Thailand) Co., Ltd., a Thailand Corporation
Trio-Tech (Bangkok) Co., Ltd., a Thailand Corporation
Trio-Tech (Malaysia) Sdn Bhd., a Malaysia Corporation (55% owned by the subsidiary of Registrant)
Trio-Tech (Kuala Lumpur) Sdn Bhd., a Malaysia Corporation (100% owned by Trio-Tech Malaysia)
Prestal Enterprise Sdn. Bhd., a Malaysia Corporation (76% owned by the Registrant)
Trio-Tech (SIP) Co., Ltd., a China Corporation
Trio-Tech (Shanghai) Co., Ltd., a China Corporation (Windup in March 30, 2017)
Trio-Tech (Chongqing) Co. Ltd., (100% owned by Trio-Tech International Pte. Ltd., a Singapore Corporation)
SHI International Pte. Ltd, a Singapore Corporation (55% owned Trio-Tech International Pte. Ltd., a Singapore Corporation)
PT SHI Indonesia, an Indonesia Corporation (100% owned by SHI International Pte. Ltd., a Singapore Corporation)
Trio-Tech (Tianjin) Co., Ltd., a China Corporation (100% owned by Trio-Tech International Pte. Ltd., a Singapore Corporation)
Consent of Independent Registered Public Accounting Firm*
Rule 13a-14(a) Certification of Principal Executive Officer of Registrant*
Rule 13a-14(a) Certification of Principal Financial Officer of Registrant*
32
Section 1350 Certification. *
101.INS*
XBRL Instance Document
101.SCH*
XBRL Taxonomy Extension Schema
101.CAL*
XBRL Taxonomy Extension Calculation Linkbase
101.DEF*
XBRL Taxonomy Extension Definition Linkbase
101.LAB*
XBRL Taxonomy Extension Label Linkbase
101.PRE*
XBRL Taxonomy Extension Presentation Linkbase
 
* Filed electronically herewith.
** Indicates management contracts or compensatory plans or arrangements required to be filed as an exhibit to this report
 
 
 
 
 
 
-28-
 
REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM
 
The Board of Directors and Shareholders
Trio-Tech International
Van Nuys, California
 
 
Opinion on the Financial Statements
 
We have audited the accompanying consolidated balance sheets of Trio-Tech International and Subsidiaries (the “Company”) as of June 30, 2019 and 2018, and the related consolidated statements of operations and comprehensive income (loss), shareholders’ equity and cash flows for each of the two years in the period ended June 30, 2019, and the related notes (collectively referred to as the “consolidated financial statements”). In our opinion, the consolidated financial statements present fairly, in all material respects, the consolidated financial position of the Company as of June 30, 2019 and 2018, and the consolidated results of its operations and its cash flows for each of the two years in the period ended June 30, 2019, in conformity with accounting principles generally accepted in the United States of America.
 
Basis of Opinion
 
These consolidated financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on the Company’s consolidated financial statements based on our audits. We are a public accounting firm registered with the Public Company Accounting Oversight Board (United States) (“PCAOB”) and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.
 
We conducted our audits in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the consolidated financial statements are free of material misstatement, whether due to error or fraud. The Company is not required to have, nor were we engaged to perform, an audit of its internal control over financial reporting. As part of our audits we are required to obtain an understanding of internal control over financial reporting but not for the purpose of expressing an opinion on the effectiveness of the Company’s internal control over financial reporting. Accordingly, we express no such opinion.
 
Our audits included performing procedures to assess the risks of material misstatement of the consolidated financial statements, whether due to error or fraud, and performing procedures that respond to those risks. Such procedures included examining, on a test basis, evidence regarding the amounts and disclosures in the consolidated financial statements. Our audits also included evaluating the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the consolidated financial statements. We believe that our audits provide a reasonable basis for our opinion.
 
 
Mazars LLP
PUBLIC ACCOUNTANTS AND
CHARTERED ACCOUNTANTS
We have served as the company’s auditors since 2009
 
/s/ Mazars LLP
 
Singapore
September 23, 2019
 
 
  
PART I. FINANCIAL INFORMATION
 
ITEM 1. FINANCIAL STATEMENTS
 
TRIO-TECH INTERNATIONAL AND SUBSIDIARIES
AUDITED CONSOLIDATED BALANCE SHEETS
(IN THOUSANDS, EXCEPT NUMBER OF SHARES)
 
 
June 30,
2019
 
 
June 30,
2018
 
ASSETS
 
 
 
 
 
 
CURRENT ASSETS:
 
 
 
 
 
 
Cash and cash equivalents
 $4,863 
 $6,539 
Short-term deposits
  4,144 
  653 
Trade accounts receivable, less allowance for doubtful accounts of $263 and $259
  7,113 
  7,747 
Other receivables
  817 
  881 
Inventories, less provision for obsolete inventory of $673 and $695
  2,427 
  2,930 
Prepaid expenses and other current assets
  287 
  208 
Assets held for sale
  89 
  91 
 Total current assets
  19,740 
  19,049 
NON-CURRENT ASSETS:
    
    
Deferred tax assets
  390 
  400 
Investment properties, net
  782 
  1,146 
Property, plant and equipment, net
  12,159 
  11,935 
Other assets
  1,750 
  2,249 
Restricted term deposits
  1,706 
  1,695 
             Total non-current assets
  16,787 
  17,425 
TOTAL ASSETS
 $36,527 
 $36,474 
 
    
    
LIABILITIES
    
    
CURRENT LIABILITIES:
    
    
Lines of credit
 $187 
 $2,043 
Accounts payable
  3,272 
  3,704 
Accrued expenses
  3,486 
  3,172 
Income taxes payable
  417 
  285 
Current portion of bank loans payable
  488 
  367 
Current portion of capital leases
  283 
  250 
 Total current liabilities
  8,133 
  9,821 
NON-CURRENT LIABILITIES:
    
    
Bank loans payable, net of current portion
  2,292 
  1,437 
Capital leases, net of current portion
  442 
  524 
Deferred tax liabilities
  327 
  327 
Income taxes payable
  439 
  828 
Other non-current liabilities
  33 
  36 
 Total non-current liabilities
  3,533 
  3,152 
TOTAL LIABILITIES
 $11,666 
 $12,973 
 
    
    
EQUITY
    
    
TRIO-TECH INTERNATIONAL’S SHAREHOLDERS' EQUITY:
    
    
Common stock, no par value, 15,000,000 shares authorized; 3,673,055 shares issued and outstanding as of June 30, 2019 and 3,553,055 shares issued and outstanding as of June 30, 2018
 $11,424 
 $11,023 
Paid-in capital
  3,305 
  3,249 
Accumulated retained earnings
  7,070 
  5,525 
Accumulated other comprehensive gain-translation adjustments
  1,867 
  2,182 
 Total Trio-Tech International shareholders' equity
  23,666 
  21,979 
Non-controlling interests
  1,195 
  1,522 
TOTAL EQUITY
 $24,861 
 $23,501 
TOTAL LIABILITIES AND EQUITY
 $36,527 
 $36,474 
 
See notes to consolidated financial statements.
  
 
 
 
TRIO-TECH INTERNATIONAL AND SUBSIDIARIES
AUDITED CONSOLIDATED STATEMENTS OF OPERATIONS AND COMPREHENSIVE INCOME (LOSS)
(IN THOUSANDS, EXCEPT EARNINGS PER SHARE)
 
 
 
For the Year Ended
 
 
 
June 30,
 
 
June 30,
 
 
 
2019
 
 
2018
 
Revenue
 
 
 
 
 
 
  Manufacturing
 $14,889 
 $15,978 
  Testing services
  16,760 
  19,391 
  Distribution
  7,451 
  6,853 
  Real estate
  98 
  139 
 
  39,198 
  42,361 
Cost of Sales
    
    
   Cost of manufactured products sold
  11,393 
  12,213 
   Cost of testing services rendered
  12,202 
  13,323 
   Cost of distribution
  6,505 
  6,068 
   Cost of real estate
  97 
  119 
 
  30,197 
  31,723 
 
    
    
Gross Margin
  9,001 
  10,638 
 
    
    
Operating Expenses:
    
    
  General and administrative
  7,049 
  7,250 
  Selling
  826 
  826 
  Research and development
  345 
  451 
  Gain on disposal of property, plant and equipment
  (13)
  (77)
           Total operating expenses
  8,207 
  8,450 
 
    
    
Income from Operations
  794 
  2,188 
 
    
    
Other Income / (Expenses)
    
    
  Interest expenses
  (319)
  (233)
  Other income, net
  249 
  335 
  Gain on sale of properties
  685 
  - 
  Total other income
  615 
  102 
 
    
    
Income from Continuing Operations before Income Taxes
  1,409 
  2,290 
 
    
    
Income Tax Benefits / (Expenses)
  42 
  (987)
 
    
    
Income from continuing operations before non-controlling interests, net of tax
  1,451 
  1,303 
 
    
    
Discontinued Operations
    
    
Loss from discontinued operations, net of tax
  (3)
  (13)
NET INCOME
  1,448 
  1,290 
 
    
    
Less: net (loss)/income attributable to non-controlling interests
  (97)
  106 
Net Income Attributable to Trio-Tech International Common Shareholders
 $1,545 
 $1,184 
 
    
    
Amounts Attributable to Trio-Tech International Common Shareholders:
    
    
Income from continuing operations, net of tax
  1,548 
  1,197 
Loss from discontinued operations, net of tax
  (3)
  (13)
Net Income Attributable to Trio-Tech International Common Shareholders
 $1,545 
 $1,184 
 
    
    
Basic Earnings per Share:
    
    
Basic earnings per share from continuing operations attributable to Trio-Tech International
 $0.42 
 $0.34 
Basic loss per share from discontinued operations attributable to Trio-Tech International
 $- 
 $(0.01)
Basic Earnings per Share from Net Income
    
    
Attributable to Trio-Tech International
 $0.42 
 $0.33 
 
    
    
Diluted Earnings per Share:
    
    
Diluted earnings per share from continuing operations attributable to Trio-Tech International nal
 $0.41 
 $0.32 
Diluted loss per share from discontinued operations attributable to Trio-Tech International
  - 
  (0.01)
Diluted Earnings per Share from Net Income
    
    
Attributable to Trio-Tech International
 $0.41 
 $0.31 
 
    
    
Weighted average number of common shares outstanding
    
    
Basic
  3,673 
  3,553 
Dilutive effect of stock options
  89 
  218 
Number of shares used to compute earnings per share diluted
  3,762 
  3,771 
 
See notes to consolidated financial statements.
 
 
 
TRIO-TECH INTERNATIONAL AND SUBSIDIARIES
CONSOLIDATED STATEMENTS OF COMPREHENSIVE INCOME (LOSS)
 
 
 
For the Year Ended
 
 
 
June 30,
 
 
June 30,
 
 
 
2019
 
 
2018
 
Comprehensive Income Attributable to Trio-Tech International Common Shareholders: 
 
 
 
 
 
 
 
 
 
 
 
 
 
Net income
  1,448 
  1,290 
Foreign currency translation, net of tax
  (420)
  728 
Comprehensive Income
  1,028 
  2,018 
Less: comprehensive (loss) / income attributable to the non-controlling interests
  (202)
  285 
Comprehensive Income Attributable to Trio-Tech International Common Shareholders
 $1,230 
 $1,733 
 
    
    
 
See notes to consolidated financial statements.
 
 
 
 
 
 
TRIO-TECH INTERNATIONAL AND SUBSIDIARIES
CONSOLIDATED STATEMENTS OF SHAREHOLDERS' EQUITY
(IN THOUSANDS) 
 
 
 
Common
Stock
 
 
Paid-in
 
 
Accumulated
Retained
 
 
Accumulated Other
Comprehensive
 
 
Non- Controlling
 
 
 
 
 
 
No. of Shares
 
 
Amount
 
 
Capital
 
 
Earnings
 
 
Income
 
 
Interests
 
 
Total
 
 
 
 
 $  
 $  
 $  
 $  
 $  
 $  
Balance at June 30, 2017
  3,523 
  10,921 
  3,206 
  4,341 
  1,633 
  1,426 
  21,527 
 
    
    
    
    
    
    
    
Stock option expenses
  - 
  - 
  43 
  - 
  - 
  - 
  43 
Net income
  - 
  - 
  - 
  1,184 
  - 
  106 
  1,290 
Dividend declared by subsidiary
  - 
  - 
  - 
  - 
  - 
  (189)
  (189)
Exercise of options
  20 
  51 
  - 
  - 
  - 
  - 
  51 
Issue of restricted shares to consultant
  10 
  51 
  - 
  - 
  - 
  - 
  51 
Translation adjustment
  - 
  - 
  - 
  - 
  549 
  179 
  728 
Balance at June 30, 2018
  3,553 
  11,023 
  3,249 
  5,525 
  2,182 
  1,522 
  23,501 
 
    
    
    
    
    
    
    
Stock option expenses
  - 
  - 
  56 
  - 
  - 
  - 
  56 
Net income
  - 
  - 
  - 
  1,545 
  - 
  (97)
  1,448 
Dividend declared by subsidiary
  - 
  - 
  - 
  - 
  - 
  (125)
  (125)
Exercise of options
  120 
  401 
  - 
  - 
  - 
  - 
  401 
Translation adjustment
  - 
  - 
  - 
  - 
  (315)
  (105)
  (420)
Balance at June 30, 2019
  3,673 
  11,424 
  3,305 
  7,070 
  1,867 
  1,195 
  24,861 
 
See accompanying notes to consolidated financial statements.
 
 
 
 
F-5
 
TRIO-TECH INTERNATIONAL AND SUBSIDIARIES
CONDENSED CONSOLIDATED STATEMENTS OF CASH FLOWS (IN THOUSANDS)
 
 
 
Year Ended
 

 
 
Jun 30,
 
 
Jun 30,
 

 
 
2019
 
 
2018
 

 
 
 
 
 
 
 

Cash Flow from Operating Activities
 
 
 
 
 
 

Net income
 $1,448 
 $1,290 

Adjustments to reconcile net income to net cash flow provided by operating activities
    
    

   Gain on disposal of properties
  (685)
  - 

   Depreciation and amortization
  2,450 
  2,214 

   Stock compensation
  56 
  43 

   Usage of provision for obsolete inventory
  (25)
  4 

   Reversal of income tax provision
  (299)
  - 

   Bad debt recovery
  10 
  7 

   Accrued interest expense, net accrued interest income
  (9)
  201 
*
Gain on sale of property, plant and equipment – continued operations
  1 
  15 

Issuance of shares to service provider
  - 
  51 

   Warranty recovery, net
  (43)
  34 

   Gain on proceeds from insurance claim
  - 
  (85)
*
   Fixed assets written off
  (33)
  - 

   Deferred tax benefit
  5 
  5 

Changes in operating assets and liabilities, net of acquisition effects
    
    

   Trade accounts receivable
  630 
  995 

   Other receivables
  64 
  (220)

   Other assets
  432 
  (377)

   Inventories
  539 
  (1,162)

   Prepaid expenses and other current assets
  (79)
  18 

   Accounts payable and accrued expenses
  (68)
  488 

   Income taxes payable
  60 
  880 

Net Cash Provided by Operating Activities
  4,454 
  4,401 
*
 
    
    

Cash Flow from Investing Activities
    
    

Proceeds from sale of properties
  943 
  - 

Proceeds from maturing of unrestricted term deposits and short-term deposits, net
  - 
  484 

Proceeds from disposal of property, plant and equipment
  3 
  42 

Insurance proceeds received
  - 
  85 
*
Investments in restricted and unrestricted deposits
  (3,445)
  (281)

Addition to property, plant and equipment
  (2,841)
  (2,309)

Net Cash Used in Investing Activities
  (5,340)
  (1,979)
*
 
    
    

Cash Flow from Financing Activities
    
    

Repayment on lines of credit
  (10,137)
  (8,883)

Repayment of bank loans and capital leases
  (687)
  (733)

Dividends paid on non-controlling interest
  (125)
  (189)

Proceeds from exercising stock options
  401 
  51 

Proceeds from bank loans and capital leases
  9,958 
  8,747 

Net Cash Used in Financing Activities
  (590)
  (1,007)

 
    
    

Effect of Changes in Exchange Rate
  (189)
  390 
*
 
    
    

Net (Decrease) / Increase in Cash, Cash Equivalents, and Restricted Cash
  (1,665)
  1,805 
*
Cash, Cash Equivalents, and Restricted Cash at Beginning of Period
  8,234 
  6,429 

Cash, Cash Equivalents, and Restricted Cash at End of Period
 $6,569 
 $8,234 

 
    
    

Supplementary Information of Cash Flows
    
    

Cash paid during the period for:
    
    

Interest
 $284 
 $181 

Income taxes
 $106 
 $245 

 
    
    

Non-Cash Transactions
    
    

  Capital lease of property, plant and equipment
 $214 
 $228 

 
See accompanying notes to consolidated financial statements.
 
 
 
Reconciliation of Cash, Cash Equivalents, and Restricted Cash
 
 
 
 
 
 
Cash
  4,863 
  6,539 
Restricted Term-Deposits in Non-Current Assets
  1,706 
  1,695 
Total Cash, Cash Equivalents, and Restricted Cash Shown in Statement of Cash Flows
 $6,569 
 $8,234 
 
    
    
 
*Amounts restated to exclude changes of restricted deposit for fiscal year 2018 for comparative purpose after adoption of ASU 2016-18 in fiscal year 2019.
 
The Statement of Cash flow reflecting adoption of ASU 2016-18, Statement of Cash Flows, Restricted Cash (Topic 230) beginning in the first quarter of 2019. Amounts included in restricted deposits represent the amount of cash pledged to secure loans payable or trade financing granted by financial institutions and serve as collateral for public utility agreements such as electricity and water. Restricted deposits are classified as non-current assets, as they relate to long-term obligations and will become unrestricted only upon discharge of the obligations.
 
 

 
TRIO-TECH INTERNATIONAL AND SUBSIDIARIES
 
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
YEARS ENDED JUNE 30, 2019 AND 2018
(IN THOUSANDS, EXCEPT EARNINGS PER SHARE)
 
1.
BASIS OF PRESENTATION AND SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES.
 
Basis of Presentation and Principles of Consolidation - Trio-Tech International (the “Company” or “TTI” hereafter) was incorporated in fiscal 1958 under the laws of the State of California. TTI provides third-party semiconductor testing and burn-in services primarily through its laboratories in Asia. In addition, TTI operates testing facilities in the U.S. The Company also designs, develops, manufactures and markets a broad range of equipment and systems used in the manufacturing and testing of semiconductor devices and electronic components. In fiscal 2019, TTI conducted business in the foregoing four segments: Manufacturing (assembly), Testing Services, Distribution and Real Estate. TTI has subsidiaries in the U.S., Singapore, Malaysia, Thailand, Indonesia and China as follows:
 
 
Ownership
Location
 
 
 
Express Test Corporation (Dormant)
100%
Van Nuys, California
Trio-Tech Reliability Services (Dormant)
100%
Van Nuys, California
KTS Incorporated, dba Universal Systems (Dormant)
100%
Van Nuys, California
European Electronic Test Centre (Dormant)
100%
Dublin, Ireland
Trio-Tech International Pte. Ltd.
100%
Singapore
Universal (Far East) Pte. Ltd.  *
100%
Singapore
Trio-Tech International (Thailand) Co. Ltd. *
100%
Bangkok, Thailand
Trio-Tech (Bangkok) Co. Ltd.
100%
Bangkok, Thailand
(49% owned by Trio-Tech International Pte. Ltd. and 51% owned by Trio-Tech International (Thailand) Co. Ltd.)
 
 
Trio-Tech (Malaysia) Sdn. Bhd.
(55% owned by Trio-Tech International Pte. Ltd.)
55%
Penang and Selangor, Malaysia
Trio-Tech (Kuala Lumpur) Sdn. Bhd.
55%
Selangor, Malaysia
(100% owned by Trio-Tech Malaysia Sdn. Bhd.)
 
 
Prestal Enterprise Sdn. Bhd.
76%
Selangor, Malaysia
(76% owned by Trio-Tech International Pte. Ltd.)
 
 
Trio-Tech (SIP) Co., Ltd. *
100%
Suzhou, China
Trio-Tech (Chongqing) Co. Ltd. *
100%
Chongqing, China
SHI International Pte. Ltd. (Dormant)
(55% owned by Trio-Tech International Pte. Ltd)
55%
Singapore
PT SHI Indonesia (Dormant)
(100% owned by SHI International Pte. Ltd.)
55%
Batam, Indonesia
Trio-Tech (Tianjin) Co., Ltd. *
100%
Tianjin, China
 
* 100% owned by Trio-Tech International Pte. Ltd.
 
The consolidated financial statements are prepared in accordance with accounting principles generally accepted in the United States of America (“U.S. GAAP’’). The basis of accounting differs from that used in the statutory financial statements of the Company’s subsidiaries and equity investee companies, which are prepared in accordance with the accounting principles generally accepted in their respective countries of incorporation. In the opinion of management, the consolidated financial statements have reflected all costs incurred by the Company and its subsidiaries in operating the business.
 
All dollar amounts in the financial statements and in the notes herein are presented in thousands of United States dollars (US$’000) unless otherwise designated.
 
Liquidity – The Company earned net income attributable to common shareholders of $1,545 and $1,184 for fiscal years 2019 and 2018, respectively.
 
 
 
 
F-8
 
The Company’s core businesses - testing services, manufacturing (assembly) and distribution - operate in a volatile industry, whereby its average selling prices and product costs are influenced by competitive factors. These factors create pressures on sales, costs, earnings and cash flows, which will impact liquidity.  
 
Foreign Currency Translation and Transactions  The U.S. dollar is the functional currency of the U.S. parent company. The Singapore dollar, the national currency of Singapore, is the primary currency of the economic environment in which the operations in Singapore are conducted. The Company also has business entities in Malaysia, Thailand and China, of which the Malaysian ringgit (“RM”), Thai baht, Chinese renminbi (“RMB”) and Indonesian rupiah, are the national currencies. The Company uses the U.S. dollar for financial reporting purposes.
 
The Company translates assets and liabilities of its subsidiaries outside the U.S. into U.S. dollars using the rate of exchange prevailing at the fiscal year end, and the consolidated statements of operations and comprehensive income or loss is translated at average rates during the reporting period. Adjustments resulting from the translation of the subsidiaries’ financial statements from foreign currencies into U.S. dollars are recorded in shareholders' equity as part of accumulated other comprehensive gain - translation adjustments. Gains or losses resulting from transactions denominated in currencies other than functional currencies of the Company’s subsidiaries are reflected in income for the reporting period.
 
Use of Estimates — The preparation of financial statements in conformity with accounting principles generally accepted in the United States of America requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenues and expenses during the reporting period. Among the more significant estimates included in these financial statements are the estimated allowance for doubtful accounts receivable, reserve for obsolete inventory, reserve for warranty, impairments and the deferred income tax asset allowance. Actual results could materially differ from those estimates.
 
Revenue Recognition — On July 1, 2018, the Company adopted ASU No. 2014-09, ASC Topic 606, Revenue from Contracts with Customers (“ASC Topic 606”). This standard update outlines a single comprehensive model for entities to use in accounting for revenue arising from contracts with customers. We adopted using the modified retrospective method applied to all contracts that were not completed contracts at the date of initial application (i.e. July 1, 2019). Results for reporting periods after July 1, 2019 are presented under ASC Topic 606, while prior period amounts are not adjusted and continue to be reported in accordance with the Company’s historic accounting under ASC Topic 605.
 
We apply a five-step approach as defined in ASC Topic 606 in determining the amount and timing of revenue to be recognized: (1) identifying the contract with customer; (2) identifying the performance obligations in the contracts; (3) determining the transaction price; (4) allocating the transaction price to the performance obligations in the contract; and (5) recognizing revenue when the corresponding performance obligation is satisfied.
 
Revenue derived from testing services is recognized when testing services are rendered. Revenue generated from sale of products in the manufacturing and distribution segments are recognized when persuasive evidence of an arrangement exists, delivery of the products has occurred, customer acceptance has been obtained (which means the significant risks and rewards of ownership have been transferred to the customer), the price is fixed or determinable and collectability is reasonably assured. Certain customers can request for installation and training services to be performed for certain products sold in the manufacturing segment. These services are mainly on helping customers with the test runs of the machines sold and are considered a separate performance obligation. Such services can be provided by other entities as well and these do not significantly modify the product. The Company recognizes the revenue at point in time when the Company has satisfied its performance obligation.
 
In the real estate segment: (1) revenue from property development is earned and recognized on the earlier of the dates when the underlying property is sold or upon the maturity of the agreement; if this amount is uncollectible, the agreement empowers the repossession of the property, and (2) rental revenue is recognized on a straight-line basis over the terms of the respective leases. This means that, with respect to a particular lease, actual amounts billed in accordance with the lease during any given period may be higher or lower than the amount of rental revenue recognized for the period. Straight-line rental revenue is commenced when the tenant assumes possession of the leased premises. Accrued straight-line rents receivable represents the amount by which straight-line rental revenue exceeds rents currently billed in accordance with lease agreements.
 
GST / Indirect Taxes The Company’s policy is to present taxes collected from customers and remitted to governmental authorities on a net basis. The Company records the amounts collected as a current liability and relieves such liability upon remittance to the taxing authority without impacting revenues or expenses.
 
Accounts Receivable and Allowance for Doubtful Accounts — During the normal course of business, the Company extends unsecured credit to its customers in all segments. Typically, credit terms require payment to be made between 30 to 90 days from the date of the sale. The Company generally does not require collateral from our customers.
 
 
 
 
F-9
 
The Company’s management considers the following factors when determining the collectability of specific customer accounts: customer credit-worthiness, past transaction history with the customer, current economic industry trends, and changes in customer payment terms. The Company includes any account balances that are determined to be uncollectible, along with a general reserve, in the overall allowance for doubtful accounts. After all attempts to collect a receivable have failed, the receivable is written off against the allowance. Based on the information available to management, the Company believed that its allowance for doubtful accounts was adequate as of June 30, 2019 and 2018.
 
Warranty Costs The Company provides for the estimated costs that may be incurred under its warranty program at the time the sale is recorded in its manufacturing segment. The Company estimates warranty costs based on the historical rates of warranty returns. The Company periodically assesses the adequacy of its recorded warranty liability and adjusts the amounts as necessary.
 
Cash and Cash Equivalents — The Company considers all highly liquid investments with an original maturity of three months or less when purchased to be cash equivalents.
 
Term Deposits Term deposits consist of bank balances and interest-bearing deposits having maturities of 3 to 6 months. As of June 30, 2019, the Company held approximately $1,426 of unrestricted term deposits in the Company’s Malaysia subsidiary and $113 of unrestricted term deposits in the Company’s 100% owned Thailand subsidiary, which were denominated in RM and Thai baht, as compared to $548 and $105 as of June 30, 2018. As of June 30, 2019, the Company held approximately $1,876 of unrestricted term deposits in the Company’s 100% owned Trio-Tech International Pte. Ltd., which were denominated in Singapore currency, and $728 of unrestricted term deposits in the Company’s 100% owned China subsidiary, which were denominated in RMB.
 
Restricted Term Deposits The Company held certain term deposits in the Singapore and Malaysia operations which were considered restricted as they were held as security against certain facilities granted by the financial institutions. As of June 30, 2019 the Company held approximately $1,478 of restricted term deposits in the Company’s 100% owned Trio-Tech International Pte. Ltd., which were denominated in Singapore currency, and $228 of restricted term deposits in the Company’s 55% owned Malaysian subsidiary, which were denominated in RM, as compared to June 30, 2018 when the Company held approximately $1,468 of restricted term deposits in the Company’s 100% owned Trio-Tech International Pte. Ltd., which were denominated in Singapore currency, and $227 of restricted term deposits in the Company’s 55% owned Malaysian subsidiary, which were denominated in the currency of Malaysia.
 
Inventories — Inventories in the Company’s manufacturing and distribution segments consisting principally of raw materials, works in progress, and finished goods are stated at the lower of cost, using the first-in, first-out (“FIFO”) method, or market value. The semiconductor industry is characterized by rapid technological change, short-term customer commitments and rapid changes in demand. Provisions for estimated excess and obsolete inventory are based on our regular reviews of inventory quantities on hand and the latest forecasts of product demand and production requirements from our customers. Inventories are written down for not saleable, excess or obsolete raw materials, works-in-process and finished goods by charging such write-downs to cost of sales. In addition to write-downs based on newly introduced parts, statistics and judgments are used for assessing provisions of the remaining inventory based on salability and obsolescence.
 
Property, Plant and Equipment & Investment Property — Property, plant and equipment, and investment property are stated at cost, less accumulated depreciation and amortization. Depreciation is provided for over the estimated useful lives of the assets using the straight-line method. Amortization of leasehold improvements is provided for over the lease terms or the estimated useful lives of the assets, whichever is shorter, using the straight-line method.
 
Maintenance, repairs and minor renewals are charged directly to expense as incurred. Additions and improvements to the assets are capitalized. When assets are disposed of, the related cost and accumulated depreciation thereon are removed from the accounts and any resulting gain or loss is included in the consolidated statements of operations and comprehensive income or loss.
 
Long-Lived Assets and Impairment – The Company’s business requires heavy investment in manufacturing facilities and equipment that are technologically advanced but can quickly become significantly under-utilized or rendered obsolete by rapid changes in demand.
 
 
 
 
F-10
 
 
The Company evaluates the long-lived assets, including property, plant and equipment and investment property, for impairment whenever events or changes in circumstances indicate that the carrying value of such assets may not be recoverable. Factors considered important that could result in an impairment review include significant underperformance relative to expected historical or projected future operating results, significant changes in the manner of use of the assets or the strategy for our business, significant negative industry or economic trends, and a significant decline in the stock price for a sustained period of time. Impairment is recognized based on the difference between the fair value of the asset and its carrying value, and fair value is generally measured based on discounted cash flow analysis, if there is significant adverse change.
 
The Company applies the provisions of ASC Topic 360, Accounting for the Impairment or Disposal of Long-Lived Assets (“ASC Topic 360”), to property, plant and equipment. ASC Topic 360 requires that long-lived assets be reviewed for impairment whenever events or changes in circumstances indicate that the carrying amount of an asset may not be recoverable through the estimated undiscounted cash flows expected to result from the use and eventual disposition of the assets. Whenever any such impairment exists, an impairment loss will be recognized for the amount by which the carrying value exceeds the fair value.
 
Leases — The Company leases certain property, plant and equipment in the ordinary course of business. The leases have varying terms. Some may have included renewal and/or purchase options, escalation clauses, restrictions, penalties or other obligations that the Company considered in determining minimum lease payments. The leases were classified as either capital leases or operating leases, in accordance with ASC Topic 840, Accounting for Leases (“ASC Topic 840”). The Company records monthly rental expense equal to the total amount of the payments due in the reporting period over the lease term in accordance with U.S. GAAP. The difference between rental expense recorded and the amount paid is credited or charged to deferred rent, which is included in accrued expenses in the accompanying consolidated balance sheets.
 
The Company’s management expects that in the normal course of business, operating leases will be renewed or replaced by other leases. The future minimum operating lease payments, for which the Company is contractually obligated as of June 30, 2019, are disclosed in these notes to the consolidated financial statements.
 
Assets under capital leases are capitalized using interest rates appropriate at the inception of each lease and are depreciated over either the estimated useful life of the asset or the lease term on a straight-line basis. The present value of the related lease payments is recorded as a contractual obligation. The future minimum annual capital lease payments are included in the total future contractual obligations as disclosed in the notes to the consolidated financial statements.
 
Comprehensive Income or Loss  ASC Topic 220, Reporting Comprehensive Income, (“ASC Topic 220”), establishes standards for reporting and presentation of comprehensive income or loss and its components in a full set of general-purpose financial statements. The Company has chosen to report comprehensive income or loss in the statements of operations. Comprehensive income or loss is comprised of net income or loss and all changes to shareholders’ equity except those due to investments by owners and distributions to owners.
 
Income Taxes — The Company accounts for income taxes using the liability method in accordance with ASC Topic 740, Accounting for Income Taxes (“ASC Topic 740”). ASC Topic 740 requires an entity to recognize deferred tax liabilities and assets. Deferred tax assets and liabilities are recognized for the future tax consequence attributable to the difference between the tax bases of assets and liabilities and their reported amounts in the financial statements, which will result in taxable or deductible amounts in future years. Further, the effects of enacted tax laws or rate changes are included as part of deferred tax expenses or benefits in the period that covers the enactment date.
 
The calculation of tax liabilities involves dealing with uncertainties in the application of complex global tax regulations. The Company recognizes potential liabilities for anticipated tax audit issues in the U.S. and other tax jurisdictions based on its estimate of whether, and the extent to which, additional taxes will be due. If payment of these amounts ultimately proves to be unnecessary, the reversal of the liabilities would result in tax benefits being recognized in the period when the Company determines the liabilities are no longer necessary. If the estimate of tax liabilities proves to be less than the ultimate assessment, a further charge to expense would result.
 
 
 
 
F-11
 
 
Retained Earnings — It is the intention of the Company to reinvest earnings of its foreign subsidiaries in the operations of those subsidiaries. These taxes are undeterminable at this time. The amount of earnings retained in subsidiaries was $14,019 and $12,393 at June 30, 2019 and 2018, respectively.
 
Research and Development Costs — The Company incurred research and development costs of $345 and $451 in fiscal year 2019 and in fiscal year 2018, respectively, which were charged to operating expenses as incurred.
 
Stock Based Compensation — Under ASC Topic 718, Compensation – Stock Compensation (“ASC Topic 718”), stock-based compensation cost is measured at the grant date, based on the estimated fair value of the award using an option pricing model for stock options (Black-Scholes) and market price for restricted stock units, and is recognized as expense over the employee’s requisite service period.
 
Earnings per Share — Computation of basic earnings per share is conducted by dividing net income available to common shares (numerator) by the weighted average number of common shares outstanding (denominator) during a reporting period. Computation of diluted earnings per share gives effect to all dilutive potential common shares outstanding during a reporting period. In computing diluted earnings per share, the average market price of common shares for a reporting period is used in determining the number of shares assumed to be purchased from the exercise of stock options.
 
Fair Values of Financial Instruments — Carrying values of trade accounts receivable, accounts payable, accrued expenses, and term deposits approximate their fair value due to their short-term maturities. Carrying values of the Company’s lines of credit and long-term debt are considered to approximate their fair value because the interest rates associated with the lines of credit and long-term debt are adjustable in accordance with market situations when the Company tries to borrow funds with similar terms and remaining maturities. See Note 17 for detailed discussion of the fair value measurement of financial instruments.
 
ASC Topic 820 defines fair value as the price that would be received to sell an asset or paid to transfer a liability in an orderly transaction between ma