TIDMTHR
RNS Number : 0847H
Thor Mining PLC
01 December 2020
1 December 2020
THOR MINING PLC
PILBARA GOLDFIELDS RAGGED RANGE PROJECT
GOLD IN STREAM SEDIMENTS UP TO 2.2g/t
The directors of Thor Mining Plc ("Thor") (AIM, ASX: THR) are
pleased to advise high grade gold in stream sediment samples, from
the third phase of gold geochemical sampling, carried out in
October, at the 100% owned Pilbara Goldfield Ragged Range Project
in Western Australia.
Highlights:
-- High grade gold in stream sediments including:
-- >2000ppb Au (>2.0 g/t) repeat 2.2g/t Au - 20PST51 (Au AR25 with repeat FA25)
-- 1886ppb Au (1.9 g/t) - 20PST54 (Au AR25)
-- 126ppb Au - 20PST52 (BLEG)
-- 173ppb Au -20PST58 (BLEG)
-- 111ppb Au-20PST66 (BLEG)
-- Third phase of stream sediment sampling defines four distinct
clusters of consistently high-grade gold.
-- High grade gold continues to validate the mineralization
potential along the 13km anomalous gold corridor, trending along
the interpreted thrust-faulted mafic/ultramafic contact.
-- Geochemical data analyses continuing, with a field mapping
and soil sampling program proposed over priority targets within the
anomalous 13km gold trend to further delineate coherent gold trends
prior to drill testing.
Mick Billing, Executive Chairman of Thor Mining, commented:
"These are very exciting times for Thor at Ragged Range, as this
project continues to exceed expectations."
"A number of very promising drill targets appear destined for
testing, and we expect that the interpretation of the airborne
magnetic survey results (near completion) should confirm several of
these."
"We look forward to providing further updates with continued
progress."
A map showing the project location can be accessed from the Thor
website via the attached link:
www.thormining.com/sites/thormining/media/maps/20-004-1a-ragged-range-location.jpg
Ragged Range Project, located in the prospective Eastern Pilbara
Craton, WA (Figure 1) is 100% owned by Thor Mining - (E46/1190,
E46/1262, E46/1355 (application), with the recent acquisition of
additional tenure surrounding the gold anomalous zones, E46/1340
and E46/1354 (application).
Further to the AIM announcement of 13 October 2020, a total of
54 stream sediment sites (20PST 35 to 55, 55A, 56 to 72 and 74 to
89 were sampled). At each site; a fine (< 2mm) and a coarse
fraction (>2mm) were collected and assayed by Intertek method
AR25 (Aqua Regia) with an additional 2kg sample of the <2mm
being assayed by Bulk Leach Extractable Gold (BLEG) using method
CN2000 (Cyanide leach) and an additional <2mm sample used for
in-field panning. The coarse >2mm fraction was crushed in the
lab and assayed by method AR25. Thor has been following this stream
sediment sampling protocol on the advice of our experienced
consultant geologist George Merhi, who has worked in the Pilbara
over many years. The advantage of using the different geochemical
sampling procedures and assaying techniques is in verifying the
presence of gold at each site and the medium the gold is in.
The geochemical program was designed to follow up anomalous gold
identified in stream sampling programs completed in October 2019
and September 2020, with values of up to 256ppb (19PST 19F -AR25)
and 130ppb (20PST 24F-BLEG). In addition to the follow up stream
samples, reconnaissance stream samples were also collected within
the tenure including samples on the granite contact to the north,
along with a 1.5km NE-SW rock chip traverse across the interpreted
13km long gold corridor;
A link to an announcement of details of the sampling program may
be accessed from the Thor website:
(
https://www.thormining.com/sites/thormining/media/pdf/ASX-Announcements/20201014-Ragged-Range-Gold-Project-Sampling-Program.pdf
).
Stream Sediment Sampling-Gold Anomalism
Fifty-four (54) sample sites with a total of 112 stream sediment
samples were selected for reconnaissance and follow up sampling to
the 2019 and 2020 geochemical programs. 11 of the 54 sample sites
returned anomalous gold values above 5ppb with 4 of these returning
greater than 20ppb with results up to 2200ppb Au (2.2g/t Au -
20PST51) (Figure 2 and Table A).
From the -2mm AR25 samples, 10 samples are above background for
the area (5ppb Au) and 5 samples are considered highly anomalous
above 20ppb Au. Perhaps more importantly, from the BLEG samples, 13
samples are above the background 5ppb Au while 7 samples are
considered to be highly anomalous above 20ppb Au. The coarse
>2mm fraction show little anomalism with the highest assay being
only 7ppb Au in a sample that reports only 3ppb Au in the <2mm
AR25 and 2.31ppb Au in the BLEG assay.
These high-grade gold results in conjunction with the results
from the October 2019 and September 2020 sampling programs (and
historical data) form four distinct high-grade gold clusters
adjacent to the interpreted thrust faulted mafic/ultramafic
contact.
www.thormining.com/sites/thormining/media/maps/rr-clusters-202012.jpg
These clusters indicate close proximity to a gold source and
will now form the focus of future exploration activities with soil
sampling and mapping upstream to identify the gold source for
defined drill targets.
Consistent anomalous gold along the gold corridor is a good
indication that the corridor is open along strike extending south
into E46/1355 application (100% Thor Mining).
ROCK SAMPLING PROGRAM
In conjunction with the stream sediment program a 1.5km rock
chip sampling traverse was undertaken in the central gold anomalous
catchment zone, (
https://www.thormining.com/sites/thormining/media/pdf/asx-announcements/20200902-asx-rr-gold-sample-results.pdf
) . A total of 14 rock samples collected returned elevated gold in
results up to 45ppb Au.
Table A: Phase 3 October 2020 Stream Sediment Sample Summary
Coordinates in MGA Zone 50 (GDA94)
At each site; a fine (< 2mm) and coarse fractions (>2mm)
were collected and assayed by Intertek method AR25 (Aqua Regia)
with an additional 2kg sample of the <2mm being assayed by Bulk
Leach Extractable Gold (BLEG) using method CN2000 (Cyanide
leach)
Sample Easting Northing Au ppb Au ppb Au g/t Visible Pan Description
No < 2mm BLEG < 2mm Gold
AR25/MS CN2000/MS FA25 Counts
20PST35 781931 7585352 1 1.02 1 1 fine flat
======== ========= ========= =========== ======= ======== =================
1 vf, 1 f,
20PST36 781978 7585309 2 2.86 2 flat
======== ========= ========= =========== ======= ======== =================
20PST37 781465 7585976 59 2.05
======== ========= ========= =========== ======= ======== =================
20PST38 781446 7585995 2 1.2
======== ========= ========= =========== ======= ======== =================
20PST39 783695 7586449 1 0.37
======== ========= ========= =========== ======= ======== =================
20PST40 783744 7586393 0.5 0.47
======== ========= ========= =========== ======= ======== =================
20PST41 783087 7586092 0.5 0.38
======== ========= ========= =========== ======= ======== =================
20PST42 783151 7586067 8 0.82
======== ========= ========= =========== ======= ======== =================
20PST43 783092 7586667 3 0.56
======== ========= ========= =========== ======= ======== =================
20PST44 783082 7586651 1 0.65
======== ========= ========= =========== ======= ======== =================
20PST45 785554 7579865 8 1.82
======== ========= ========= =========== ======= ======== =================
1 med, rnd edges
20PST46 785595 7579873 6 1.61 1 flat
======== ========= ========= =========== ======= ======== =================
20PST47 785828 7578310 2 8.1
======== ========= ========= =========== ======= ======== =================
20PST48 785736 7580837 1 1.89
======== ========= ========= =========== ======= ======== =================
20PST49 783402 7582258 0.5 0.85
======== ========= ========= =========== ======= ======== =================
20PST50 784483 7582317 0.5 0.48
======== ========= ========= =========== ======= ======== =================
20PST51 783101 7583251 2200 24.51 2.2 1 1f, flat, ang
======== ========= ========= =========== ======= ======== =================
20PST52 781564 7584405 3 126.41
======== ========= ========= =========== ======= ======== =================
1vcrs, 1f,
20PST53 781579 7584409 7 3.06 2 rnd edges
======== ========= ========= =========== ======= ======== =================
6, 3vcrs,3f
20PST54 780793 7585100 1886 113.2 6 ang
======== ========= ========= =========== ======= ======== =================
20PST55 784130 7586221 2 1.08
======== ========= ========= =========== ======= ======== =================
20PST55A 784889 7578997 3 0.5
======== ========= ========= =========== ======= ======== =================
20PST56 784791 7578909 3 0.49
======== ========= ========= =========== ======= ======== =================
20PST57 786567 7579686 2 10.34 1 1f, flat
======== ========= ========= =========== ======= ======== =================
20PST58 786632 7579686 10 173.8 2 1rnd,1jagged
======== ========= ========= =========== ======= ======== =================
20PST59 784512 7580045 2 1.56
======== ========= ========= =========== ======= ======== =================
20PST60 784483 7580095 0.5 0.33
======== ========= ========= =========== ======= ======== =================
20PST61 784997 7580395 3 0.5
======== ========= ========= =========== ======= ======== =================
20PST62 785055 7580397 3 2.31
======== ========= ========= =========== ======= ======== =================
20PST63 783987 7581754 3 17.88 1 1f, rnd edges
======== ========= ========= =========== ======= ======== =================
20PST64 783991 7581733 0.5 0.86 1 1 med, ang
======== ========= ========= =========== ======= ======== =================
20PST65 783483 7581421 1 0.48
======== ========= ========= =========== ======= ======== =================
20PST66 783758 7582481 25 111.72
======== ========= ========= =========== ======= ======== =================
20PST67 783758 7582481 0.5 0.27
======== ========= ========= =========== ======= ======== =================
20PST68 783730 7582380 4 1.23
======== ========= ========= =========== ======= ======== =================
20PST69 783623 7583470 0.5 0.57
======== ========= ========= =========== ======= ======== =================
20PST70 781012 7585654 6 1.84 2 2vf jagged
======== ========= ========= =========== ======= ======== =================
20PST71 784727 7585751 0.5 0.48
======== ========= ========= =========== ======= ======== =================
20PST72 785405 7585414 3 1.6
======== ========= ========= =========== ======= ======== =================
20PST73 Blank 0.5 0.5
======== ========= ========= =========== ======= ======== =================
20PST74 779246 7591856 2 45.17 1 1vf ang
======== ========= ========= =========== ======= ======== =================
20PST75 781315 7590257 2 0.48
======== ========= ========= =========== ======= ======== =================
20PST76 780314 7588246 3 1.39
======== ========= ========= =========== ======= ======== =================
20PST77 780215 7589963 0.5 1.05
======== ========= ========= =========== ======= ======== =================
20PST78 779931 7589619 2 1.44
======== ========= ========= =========== ======= ======== =================
20PST79 779364 7588975 0.5 0.34
======== ========= ========= =========== ======= ======== =================
20PST80 780208 7586992 0.5 0.18
======== ========= ========= =========== ======= ======== =================
20PST81 779335 7590223 2 0.51
======== ========= ========= =========== ======= ======== =================
20PST82 780919 7590737 0.5 21.9
======== ========= ========= =========== ======= ======== =================
20PST83 780906 7590789 3 2.96
======== ========= ========= =========== ======= ======== =================
20PST84 779341 7588937 0.5 15.55 6 6f, ang
======== ========= ========= =========== ======= ======== =================
20PST85 780535 7587470 0.5 0.43
======== ========= ========= =========== ======= ======== =================
20PST86 780456 7587628 0.5 0.38
======== ========= ========= =========== ======= ======== =================
20PST87 779895 7587610 0.5 0.59
======== ========= ========= =========== ======= ======== =================
20PST88 780193 7587005 0.5 10.18
======== ========= ========= =========== ======= ======== =================
20PST89 779892 7587638 5 5.94
======== ========= ========= =========== ======= ======== =================
The information contained within this announcement is deemed to
constitute inside information as stipulated under the Market Abuse
Regulations (EU) No. 596/2014. Upon the publication of this
announcement, this inside information is now considered to be in
the public domain.
Enquiries:
Mick Billing +61 (8) 7324 Thor Mining PLC Executive Chairman
1935
Ray Ridge +61 (8) 7324 Thor Mining PLC CFO/Company Secretary
1935
Colin Aaronson +44 (0) 207 3835100 Grant Thornton Nominated Adviser
UK LLP
Nick Emerson +44 (0) 1483 SI Capital Ltd Broker
413500
Competent Persons Report
The information in this report that relates to exploration
results is based on information compiled by Nicole Galloway
Warland, who holds a BSc Applied geology (HONS) and who is a Member
of The Australian Institute of Geoscientists. Ms Galloway Warland
is an employee of Thor Mining PLC. She has sufficient experience
which is relevant to the style of mineralisation and type of
deposit under consideration and to the activity which she is
undertaking to qualify as a Competent Person as defined in the 2012
Edition of the 'Australasian Code for Reporting of Exploration
Results, Mineral Resources and Ore Reserves'. Nicole Galloway
Warland consents to the inclusion in the report of the matters
based on her information in the form and context in which it
appears.
About Thor Mining PLC
Thor Mining PLC (AIM, ASX: THR) is a resources company quoted on
the AIM Market of the London Stock Exchange and on ASX in
Australia.
At the 100% owned Ragged Range Project in the Pilbara region of
Western Australia, Thor has exciting early stage results for which
gold and nickel drilling is planned."
Thor is earning an 80% interest in the Alford East copper
project, on South Australia's Yorke Peninsula, where significant
historical copper mineralisation is considered amenable to insitu
recovery production.
Thor also holds a 30% interest in Australian copper development
company EnviroCopper Limited, which in turn holds rights to earn up
to a 75% interest in the mineral rights and claims over the
resource on the portion of the historic Kapunda copper mine in
South Australia recoverable by way of in situ recovery .
EnviroCopper also holds rights to earn a 75% interest in portion of
the Alford West copper project also in South Australia, and is also
considered amenable to recovery by way of in situ recovery .
Thor holds 100% of the advanced Molyhil tungsten project in the
Northern Territory of Australia, for which an updated feasibility
study in August 2018(1) suggested attractive returns.
Adjacent Molyhil, at Bonya, Thor holds a 40% interest in
deposits of tungsten, copper, and vanadium, including Inferred
resource estimates for the Bonya copper deposit, and the White
Violet and Samarkand tungsten deposits(2).
Thor holds 100% of the Pilot Mountain tungsten project in Nevada
USA which has a JORC 2012 Indicated and Inferred Resources
Estimate(3) on 2 of the 4 known deposits.
"Thor holds mineral claims in the US states of Colorado and Utah
with historical high grade uranium and vanadium drilling and
production results."
Notes
(1) Refer ASX and AIM announcement of 23 August 2018
(2) Refer ASX and AIM announcement of 26 November 2018, and 29
January 2020
(3) Refer AIM announcement of 13 December 2018 and ASX
announcement of 14 December 2018
Refer AIM announcement of 10 February 2016 and ASX announcement
of 12 February 2018
Refer ASX and AIM announcement of 15 August 2019
1 JORC Code, 2012 Edition - Table 1 report template
1.1 Section 1 Sampling Techniques and Data
Criteria JORC Code explanation Commentary
Sampling The programme comprised
techniques * Nature and quality of sampling (eg cut channels, stream sediment trap
random chips, or specific specialised industry site sampling with coarse
standard measurement tools appropriate to the (3kg - 5mm+2mm) and
minerals under investigation, such as down hole gamma fine (4kg - 2mm) fraction
sondes, or handheld XRF instruments, etc). These samples collected for
examples should not be taken as limiting the broad geochemical analysis
meaning of sampling. for Au 2kg BLEG (fine
fraction), aqua regia
(fine and coarse fractions)
* Include reference to measures taken to ensure sample and multi-element analysis.
representivity and the appropriate calibration of any In addition a 10-12
measurement tools or systems used. kg sample of - 2mm material
was collected from each
trap site and panned
* Aspects of the determination of mineralisation that in the field.
are Material to the Public Report. Each rock chip sample
comprised 8 - 10kg of
rock taken along a 1.5km
* In cases where 'industry standard' work has been done traverse for geochemical
this would be relatively simple (eg 'reverse analysis for Au (FA
circulation drilling was used to obtain 1 m samples 50) and multi-element
from which 3 kg was pulverised to produce a 30 g 4 acid digestion.
charge for fire assay'). In other cases more
explanation may be required, such as where there is
coarse gold that has inherent sampling problems.
Unusual commodities or mineralisation types (eg
submarine nodules) may warrant disclosure of detailed
information.
==============================================================
Drilling Not applicable
techniques * Drill type (eg core, reverse circulation, open-hole
hammer, rotary air blast, auger, Bangka, sonic, etc)
and details (eg core diameter, triple or standard
tube, depth of diamond tails, face-sampling bit or
other type, whether core is oriented and if so, by
what method, etc).
============== ============================================================== ==============================
Drill sample Not applicable
recovery * Method of recording and assessing core and chip
sample recoveries and results assessed.
* Measures taken to maximise sample recovery and ensure
representative nature of the samples.
* Whether a relationship exists between sample recovery
and grade and whether sample bias may have occurred
due to preferential loss/gain of fine/coarse
material.
============== ============================================================== ==============================
Logging No logging was undertaken
* Whether core and chip samples have been geologically
and geotechnically logged to a level of detail to
support appropriate Mineral Resource estimation,
mining studies and metallurgical studies.
* Whether logging is qualitative or quantitative in
nature. Core (or costean, channel, etc) photography.
* The total length and percentage of the relevant
intersections logged.
============== ============================================================== ==============================
Sub- sampling Samples were screened
techniques * If core, whether cut or sawn and whether quarter, in the field as described
half or all core taken. in "Sampling Techniques"
above.
The sample sizes are
* If non-core, whether riffled, tube sampled, rotary as per industry standard
split, etc and whether sampled wet or dry. for stream
* For all sample types, the nature, quality and
============== ============================================================== ==============================
and sample appropriateness of the sample preparation sediment geochemistry.
preparation technique. One field duplicate
* Quality control procedures adopted for all and one blank sample
sub-sampling stages to maximise representivity of were submitted for assay
samples. with the other samples.
* Measures taken to ensure that the sampling is
representative of the in situ material collected,
including for instance results for field
duplicate/second-half sampling.
* Whether sample sizes are appropriate to the grain
size of the material being sampled.
==============================================================
Quality The proposed assay method
of assay * The nature, quality and appropriateness of the is appropriate for preliminary
data and assaying and laboratory procedures used and whether exploration.
laboratory the technique is considered partial or total.
tests
* For geophysical tools, spectrometers, handheld XRF
instruments, etc, the parameters used in determining
the analysis including instrument make and model,
reading times, calibrations factors applied and their
derivation, etc.
* Nature of quality control procedures adopted (eg
standards, blanks, duplicates, external laboratory
checks) and whether acceptable levels of accuracy (ie
lack of bias) and precision have been established.
================== ============================================================== =================================
Verification Not undertaken
of sampling * The verification of significant intersections by
and assaying either independent or alternative company personnel.
* The use of twinned holes.
* Documentation of primary data, data entry procedures,
data verification, data storage (physical and
electronic) protocols.
* Discuss any adjustment to assay data.
================== ============================================================== =================================
Location Hand held GPS - MGA94
of data * Accuracy and quality of surveys used to locate drill zone 50 (GDA)
points holes (collar and down-hole surveys), trenches, mine
workings and other locations used in Mineral Resource
estimation.
* Specification of the grid system used.
* Quality and adequacy of topographic control.
================== ============================================================== =================================
Data spacing Not applicable - no
and distribution * Data spacing for reporting of Exploration Results. resource is being reported
* Whether the data spacing and distribution is
sufficient to establish the degree of geological and
grade continuity appropriate for the Mineral Resource
and Ore Reserve estimation procedure(s) and
classifications applied.
* Whether sample compositing has been applied.
================== ============================================================== =================================
Orientation Orientational bias is
of data * Whether the orientation of sampling achieves unbiased not applicable to stream
in relation sampling of possible structures and the extent to sediment sampling which
to geological which this is known, considering the deposit type. are essentially one
structure dimensional.
* If the relationship between the drilling orientation
and the orientation of key mineralised structures is
considered to have introduced a sampling bias, this
should be assessed and reported if material.
================== ============================================================== =================================
Sample security Samples were flown back
* The measures taken to ensure sample security. to
Nullagine and trucked
to the assay laboratory
in Perth.
================== ============================================================== =================================
Sample security
levels are
considered
appropriate for a
preliminary
reconnaissance
assessment.
Audits None undertaken
or reviews * The results of any audits or reviews of sampling
techniques and data.
================= ========================================================================== =======================
1.1 Section 2 Reporting of Exploration Results
Criteria JORC Code explanation Commentary
Mineral Exploration results
tenement * Type, reference name/number, location and ownership are reported on E46/1190
and land including agreements or material issues with third and E46/1262 in Western
tenure status parties such as joint ventures, partnerships, Australia held 100%
overriding royalties, native title interests, by Thor Mining PLC.
historical sites, wilderness or national park and
environmental settings.
* The security of the tenure held at the time of
reporting along with any known impediments to
obtaining a licence to operate in the area.
===============================================================
Exploration Not applicable
done by * Acknowledgment and appraisal of exploration by other
other parties parties.
================= =============================================================== ===========================
Geology Yet to be determined
* Deposit type, geological setting and style of
mineralisation.
================= =============================================================== ===========================
Drill hole No drilling has been
Information * A summary of all information material to the undertaken or reported
understanding of the exploration results including a
tabulation of the following information for all
Material drill holes:
o easting and northing of the drill hole
collar
o elevation or RL (Reduced Level - elevation
above sea level in metres) of the drill
hole collar
o dip and azimuth of the hole
o down hole length and interception depth
o hole length.
* If the exclusion of this information is justified on
the basis that the information is not Material and
this exclusion does not detract from the
understanding of the report, the Competent Person
should clearly explain why this is the case.
================= =============================================================== ===========================
Data aggregation Only field observations
methods * In reporting Exploration Results, weighting averaging have been reported.
techniques, maximum and/or minimum grade truncations There has been no data
(eg cutting of high grades) and cut-off grades are aggregation.
usually Material and should be stated.
* Where aggregate intercepts incorporate short lengths
of high grade results and longer lengths of low grade
results, the procedure used for such aggregation
should be stated and some typical examples of such
aggregations should be shown in detail.
* The assumptions used for any reporting of metal
equivalent
================= =============================================================== ===========================
values should be clearly stated.
Relationship No drilling has been
between * These relationships are particularly important in the undertaken or reported
mineralisation reporting of Exploration Results.
widths and
intercept
lengths * If the geometry of the mineralisation with respect to
the drill hole angle is known, its nature should be
reported.
* If it is not known and only the down hole lengths are
reported, there should be a clear statement to this
effect (eg 'down hole length, true width not known').
================== =============================================================== ==============================
Diagrams A sample location plan
* Appropriate maps and sections (with scales) and including current 1:100k
tabulations of intercepts should be included for any scale geology has been
significant discovery being reported These should provided
include, but not be limited to a plan view of drill
hole collar locations and appropriate sectional
views.
================== =============================================================== ==============================
Balanced All results have been
reporting * Where comprehensive reporting of all Exploration reported
Results is not practicable, representative reporting
of both low and high grades and/or widths should be
practiced to avoid misleading reporting of
Exploration Results.
================== =============================================================== ==============================
Other substantive All data have been reported
exploration * Other exploration data, if meaningful and material,
data should be reported including (but not limited to):
geological observations; geophysical survey results;
geochemical survey results; bulk samples - size and
method of treatment; metallurgical test results; bulk
density, groundwater, geotechnical and rock
characteristics; potential deleterious or
contaminating substances.
================== =============================================================== ==============================
Further Based on results follow
work * The nature and scale of planned further work (eg up stream sediment and/or
tests for lateral extensions or depth extensions or soil geochemistry surveys
large-scale step- out drilling). in conjunction with
geological mapping and
rock chip sampling programs
* Diagrams clearly highlighting the areas of possible will be undertaken to
extensions, including the main geological locate the source of
interpretations and future drilling areas, provided any gold mineralisation.
this information is not commercially sensitive.
================== =============================================================== ==============================
This information is provided by RNS, the news service of the
London Stock Exchange. RNS is approved by the Financial Conduct
Authority to act as a Primary Information Provider in the United
Kingdom. Terms and conditions relating to the use and distribution
of this information may apply. For further information, please
contact rns@lseg.com or visit www.rns.com.
RNS may use your IP address to confirm compliance with the terms
and conditions, to analyse how you engage with the information
contained in this communication, and to share such analysis on an
anonymised basis with others as part of our commercial services.
For further information about how RNS and the London Stock Exchange
use the personal data you provide us, please see our Privacy
Policy.
END
UPDFSESAFESSELE
(END) Dow Jones Newswires
December 01, 2020 04:17 ET (09:17 GMT)
Thor Energy (LSE:THR)
Historical Stock Chart
From Jun 2024 to Jul 2024
Thor Energy (LSE:THR)
Historical Stock Chart
From Jul 2023 to Jul 2024