TIDMMCON
RNS Number : 7057R
Mincon Group Plc
31 October 2019
MINCON GROUP PLC
("Mincon" or the "Group")
INTERIM TRADING UPDATE
Mincon Group plc (ESM:MIO AIM:MCON), the Irish engineering group
specialising in the design, manufacture, sale and servicing of rock
drilling tools and associated products, today provides an interim
trading update for the period from 1st January, 2019 to date,
incorporating the first nine months of trading to 30(th) September,
2019.
This was the weakest quarter of the year, and a considerable
step down from the same record quarter last year when we cleared
the final backlog in orders. While this was a disappointment, the
stance we took in reducing overheads in H1, fed through into Q3,
and we believe we are beginning to see the recovery in profits and
cash.
Key elements (comparison of the first nine months of 2019 to
2018):
Revenue flat for the first nine months
-- Mincon product sales decreased by 3%, of which;
o HardTekno disposal accounted for c. 1%
o Premier disposal accounted for c. 3%
-- The acquisition of Pacific Bit of Canada added 1% to Mincon product sales
-- Third party product sales, excluding rig sales was up 5%
Excluding write-off's and exceptional items reported at H1
2019;
-- Gross margin down 3% to 35%
-- Operating profit down 3% to 11%
-- Profit before tax down 2% to 11%
Including write-off's and exceptional items reported at H1 2019,
profit before tax was down 0.5%
This has been a challenging year to date and we have had many
issues to address;
-- Inability to supply consistent quality due to continued use
of out-sourced heat treatment suppliers
-- some regional weakness and poor regulatory behaviours in Africa
-- some increased competition, and distributor weakness
-- and some costs incurred as we opened new markets like Russia,
or new product release delays as older inventory is run-off.
From early in 2019, we have been unwinding our historical sales
and distribution structure in favour of a regional, high - service
structure that we have seen is now winning contracts. This process
is now substantially complete, and we have appointed a good team to
lead these regions. We have returned to positive cash generation as
working capital stabilises, depreciation is half capital
expenditure, and profitability drops through.
Our advantage is to be faster moving, flexible, and responsive,
with better engineering delivered by a higher level of support
service to customers. Promoting this approach, with better
engineering solutions, has won us several large contracts in recent
months, and we should see revenues from these recently won
contracts flow through in the final quarter of 2019 and beyond.
Along with the flat sales, we had ramped up costs to support
sales levels that have, as yet, not delivered. We decided to reduce
overheads at the same time as the change in business model, and
while this has been expensive and time consuming, it was necessary
and has been implemented. We also cut back the direct labour in the
factories as the new revenue level stabilised at or around the
level of last year.
The capital expenditure approved in the last year has been at
about EUR2 million, about half the rate of depreciation, and
outside of requirements in GeoTech, should we decide to take
production in-house, may run at that level for the coming
periods.
Revenue
Revenue is flat on last year at this period, at just over EUR86
million, with the small acquisitions being compensated for by the
small disposals. Profitability is at or around the same levels as
2018, with some reduction in the quality of those profits due to
the amount of corporate reorganization and activity. This is
disappointing, and since we are geared for higher turnover, when
this does not materialize it has a significant effect on our
margins, which were softer than at the end of H1.
By the same token, when sales grow, the improvement in margins
should also be significant. It should be recalled that the 2018
revenue contained millions of euro of backlogged revenue, while
2019 has a normal four week manufacturing cycle. 2018 was a cycle
of forcing revenue through the factories, while 2019 and beyond
will be about efficiency at these current levels.
As a Group, we stepped up our fixed costs base for higher
anticipated revenue levels and when these sales were not achieved,
we moved to reduce the overheads. The disequilibrium occurred in
the last two quarters, with Q3 being notably weak, but we managed
significant cost cuts while absorbing the disruption and costs.
We have now completed the cost reduction programme and paid for
any significant cost cutting, and we look forward to improved
margins in Q4 and beyond, while noting that this is directly a
function of the sales volumes achieved. We will of course, continue
to redeploy the investment and overheads of the Group where they
can deliver better value and reward, but that is part of the
ongoing costs programmes.
We restructured the organisation of the Group as a core element
of the refocus. We have divided the Group into the four regions,
Americas, Australia Pacific, Europe/Middle East and Africa, and
internally appointed new managers to the latter two regions. Africa
had fallen back considerably and has required reinvigoration and
relaunch. This is well in hand, as is the development of our Black
Empowerment planning in the South African market. We believe this
is key to success in Africa, equitable treatment of staff, honest
behaviour with the state and regulatory authorities, and a
long-term view of our commitments in the region.
Europe remains successful and continues to develop. The revenue
from the Americas has grown significantly with new contract wins,
and Australia is a key region both for the Greenhammer launch in
the coming months, and the commissioning of its heat treatment
investment to support regional supply.
The hydraulic hammer range
We have recently completed extended testing over a fifteen day
period and drilled sustained meters over several shifts as part of
that programme. We set out to test different variations of the
hammer system to determine the best combination of parts to ensure
drilling speed and reliability. Of the different systems tested,
incorporating the drill strings, hydraulic management systems and
bits, one particular configuration performed very well, beyond any
engineered or forecast level which bodes well for the future of
this product.
This latter set up and model has become the selected hammer
product at the core of the system and, all other elements remaining
equal, will form the launch model. This launch is expected in the
coming months, perhaps commencing to invoice in the last quarter of
2019, but certainly in Q1, 2020. The designs and the delivery
system appear robust after the recent testing, and the new designs
of bits have also functioned well within specification.
Margins
The gross margin continues to run at about three per cent lower
than last year, with approximately half of this due to product mix
changes, and with the balance due to loss of contracts we could not
supply, and some softness in the mid-range hammer and bit sizes
arising from that. This has tracked through to the operating margin
line in Q3.
With the exceptional gains and write-offs this is not
immediately visible in the financial statements, nor will it be at
the year-end, due to, inter alia, to the requirements of the
accounting standards, so we intend to expand our comment
accordingly at that time, as we did at the half year.
We expect the distortions caused by the reorganization activity
to fall away in Q4, and with the lower cost base, the gross and
operating margins should begin to normalise again.
Driconeq has been a very successful addition to the Group,
though with large turnover and relatively small margins thereby
contributing to the downward change on margins, as has the disposal
of HardTekno, a small but higher margin company that did not fit
with our wider group strategy. The margins on the core products
appear intact, in the face of increased competition by competent
Indian and Chinese suppliers, particularly in Africa where price
sensitivity is higher and quality expectations of products are
lower. African markets are currently in rapid evolution and we are
taking proactive steps to adapt our strategy there.
Balance sheet
As expected, the Group has returned to positive cash generation
in the quarter, and this is expected to continue in the coming
trading periods. We have reduced overheads, completed the factory
extensions a year ago, and as the new heat treatment plant is
commissioned in Australia, the last set of historic capital
expenditure decisions has now been concluded. The quality of what
is being produced in the new furnaces across the Group is improving
to the new standards required, and now represents our brand
consistently.
This will leave the Group in a strong production shape overall,
and the exceptional gains we have made on non-core disposals have
accommodated write-offs and provisioning so that assets in the
balance sheet are of good quality, current, and realisable over
time. We are now able to work on switching production around the
factories for comparative manufacturing advantage.
For us, this does not necessarily mean that we will be the
lowest cost producer necessarily, but we can provide customers with
production and service from a location that best assists their
operations. In some cases, the cost of production might be higher
where we choose to make product, but the cost of transport is
lower, and the speed to market and flexibility of design
modification is higher.
We have worked hard over recent years to minimize the volatility
of our foreign exchange exposure, and where we have acquired
machinery, we have leased much of it in the region in which the
manufacturing is occurring, and where the local profitability
supports the lending. That means our free cash will reside at Group
for acquisitions should we see valuable opportunity, for dividends,
and for other investment. Cash flow is positive and is expected to
remain that way for the foreseeable future.
Market comment and position
The Regional leadership structure has been put in place with
experienced well-qualified managers, and we are winning significant
contracts, for mining, mining services, and in the GeoTech space,
which we have entered in the last two years. We continue to build
out our capability in that GeoTech sub-sector with the intention of
driving growth and profitability. Our experience is that the
profitability there should, when we have established our market
position, support the same margins as we have seen in the mining
sector. Much of our GeoTech sales are being manufactured outside
the Group, but we can manufacture ourselves over time, and we are
considering our options in that regard.
At present we manufacture most of what we sell in the mining
consumables space, hammers, bits, pipes, subs and so on, and in
GeoTech much of what we buy-in, fits inside our capability today,
with the added advantage that we do most of our own heat treatment
for items at the upper end of value add. Capital expenditure at
present, after some years of build out, has fallen to half the
depreciation rate, and is likely to remain there for a couple of
years outside of decisions and opportunities in the GeoTech
side.
Our factories are well equipped with modern kit and overall
throughput is running at about 80% of the capacity we installed. As
the larger contracts spool up to their full potential and exiting
supplier inventory is run-off, we expect to be able to absorb the
increased throughput efficiently. We are also now geared up for
increased sales and revenue from the new hammer and bit ranges for
2020.
The response of every competitor in the mining consumables
sector has been to increase production in response to market
growth, and this has led on to price competition with any market
set-back , or where routes to market are blocked, such as the
ongoing issues between the USA and China, and supply is redirected.
We offer a value proposition, better production for cost expended,
and to work through this model to take market share means we aim to
constantly improve our offering. Fuel efficiency has been a
direction of the Group for years, and the next generation hammers
and systems have this at the core.
Concluding comment
With zero net debt, free cash balances, positive cash flow, new
ranges of hammers and a management group that is playing as a team,
we continue to see contract wins and success in the sectors we
address. The core products remain sound, well positioned and
represent value for money in the eyes of our customers. The GeoTech
and mining consumables and services wins in Chile, Indonesia,
Chesapeake, USA, and Europe give us an indication that the way we
are deploying our investments in time and resource will continue to
develop and pay off for the Group. The next generation products
coming through in down the hole mining, and in piling, give us a
great platform for the coming years.
Forward looking statements
Any forward looking statements made in this document represent
the Board's best judgment as to what may occur in the future.
However, the Group's actual results for the current and future
financial periods and corporate developments will depend on a
number of economic, competitive and other factors, some of which
will be outside the control of the Group. Such factors could cause
the Group's actual results for future periods to differ materially
from those expressed in any forward looking statements included in
this announcement.
31st October, 2019
For further information, please contact:
Mincon Group plc
Joe Purcell - Chief Executive Officer Tel: +353 (61) 361 099
Peter E. Lynch - Chief Operating Officer
Mark McNamara - Chief Financial Officer
Davy Corporate Finance (Nominated Adviser and Euronext Growth
Advisor)
Anthony Farrell Tel: +353 (1) 679 6363
Daragh O'Reilly
This information is provided by RNS, the news service of the
London Stock Exchange. RNS is approved by the Financial Conduct
Authority to act as a Primary Information Provider in the United
Kingdom. Terms and conditions relating to the use and distribution
of this information may apply. For further information, please
contact rns@lseg.com or visit www.rns.com.
END
TSTWGGCWUUPBGRU
(END) Dow Jones Newswires
October 31, 2019 03:00 ET (07:00 GMT)
Mincon (LSE:MCON)
Historical Stock Chart
From Jun 2024 to Jul 2024
Mincon (LSE:MCON)
Historical Stock Chart
From Jul 2023 to Jul 2024