Encouraging Final Results
January 15 2008 - 2:00AM
UK Regulatory
RNS Number:7710L
Leyshon Resources Limited
15 January 2008
15 January 2008
ENCOURAGING FINAL DRILL RESULTS EXPECTED TO
UPGRADE RESOURCES
Leyshon Resources Limited (AIM & ASX: LRL) is pleased to announce encouraging
final drill results from a major drill programme completed at the Zheng Guang
gold zinc project in Heilongjiang northeast China, which are expected to lead to
an upgraded resource estimate.
The 43,700 metre diamond and reverse circulation programme, completed ahead of
schedule in October 2007, focused mainly on infill drilling the Main Ore Zone. A
number of exploration targets were also tested and the proposed tailings dam
area has been sterilised ahead of mine development.
The Main Ore Zone
The Main Ore Zone infill programme has reported some very encouraging results
from key sections, which show that the mineralisation exhibits good continuity
both between sections and down dip.
The results are consistent with those previously reported from adjacent holes
and collectively provide confidence that the revised resource estimate, due out
in February 2008, will upgrade much of the 1.21 million ounces gold, 3.72
million ounces silver and 94,000 tonnes zinc resource from Inferred to Measured
and Indicated status.
Some of the better results are provided in Table 1 below. They include the very
encouraging near surface intersection in diamond drill holes ZGD177, 20 metres
at 8 g/t Au from 1 metre below surface and ZGD227, 10 metres at 2.6 g/t Au from
surface, together with a number of holes reporting broad mining widths at good
grades, all of which are within the current open pit design.
Table 1 - Main Ore Zone Significant Intersections
From Metres Au g/t Ag g/t Zn %
ZGD177 1 20 8 13.6 0.1
ZGD183 82 37 3.1 9.9 0.8
ZGD183 127.5 7.5 3.1 11.8 0.4
ZGD227 0 10 2.6 15.2 0
ZGD229 47 16 4.8 9.2 0.5
ZGD244 58 26 4.3 18.8 1
ZGD246 117 9 2.5 6.7 0.5
ZGD248 175 8 6.5 23.8 2.3
ZGD251 58 14 5.5 8.2 0.4
ZGD251 99 11 3.8 20.8 0.8
ZGD257 139 20 2.1 10.1 0.6
ZGD259 63 20 5.9 7.6 0.6
ZGD262 68 15 7.4 8.3 0.7
The Main Ore Zone has been extended by more than 100 metres to the north with
intersections reported from the adjacent sections 49500N and 49550N. The best of
the results from these sections are shown below in Table 2:
Table 2 - Northern Extension Significant Intersections
From Metres Au g/t Ag g/t Zn %
ZGD154 107 6 2.3 25 1
ZGD155 30 2 7.3 17 0.1
ZGD155 146 3 7.5 31 2.6
ZGD156 153 9 3.2 14.8 1.2
ZGD160 109 4 5.3 10 1.3
ZGD160 138 7 3.5 10.4 1
ZGD161 109 4 13.6 17 1.7
ZGD161 148.5 1 17.6 10 0.6
ZGD162 120 5 7.9 23.6 1.2
ZGD163 107 6 2.3 25 1
As previously reported, mineralisation has been discovered with shallow reverse
circulation drilling on six out of seven of the geochemical anomalies tested
across the licence area. These potential new deposits were followed up with a
small number of diamond drill holes designed primarily to test for vein
orientation ahead of a larger programme in 2008.
Zheng Guang - North & South Deposits
The Zheng Guang North deposit, which was discovered in 2006, and is located 750
metres to the north of the Main Ore Zone is continuing to show good potential to
be an additional source of near surface mill feed. Diamond drill hole ZGD195
reported three ten metre intersections with the best being 17metres at 2.6 g/t
Au from 95 metres.
Encouraging results were also reported from Zheng Guang South and other targets
and these will be followed up in this year's programme.
The 2008 exploration programme on the Zheng Guang licence is scheduled to
commence in May 2008 and will target extensions in the Main Ore Zone and follow
up the recent discoveries across the licence area.
As previously reported a regional generative programme is being prepared for
2008 which will test the highly mineralized, but underexplored gold and base
metal belt on the recently acquired 83 km2 additional exploration licence areas.
Managing Director Paul Atherley commented: "These results provide us with
continued confidence that the revised resource estimate, which is expected to be
released shortly, will upgrade much of the resource to Measured and Indicated
status allowing mine design to be finalised immediately ahead of project
development."
For further information contact:
Leyshon Resources Limited
Paul Atherley - Managing Director
Tel: +86 137 1800 1914
Mob: +61 417 475 038
Pelham Public Relations
Charles Vivian
Tel: +44 (0)207 743 6672
Mob: +44 (0)7977 297 903
Candice Sgroi
Tel: +44 (0)207 743 6376
Mob: +44 (0)7894 462 114
Seymour Pierce
Jonathan Wright
Tel: +44 (0)207 107 8050
http://www.leyshonresources.com
Background Information
Leyshon is fully engaged in China with its main operating office in Beijing its
Chairman, Managing Director and Chief Operating Officer all based in China. Over
80% of employees are either native Chinese or Mandarin speaking.
The company is rapidly progressing the Zheng Guang gold zinc project to
production status and is aiming to jointly develop it as the first ever Sino
Foreign owned mine in the mineral rich province of Heilongjiang in 2008.
The project benefits from exceptional infrastructure as it is located within a
well established coal and copper mining community with rail, power, water and
mining contractor services immediately available.
Hellman and Schofield Pty Ltd of Australia has reported a JORC compliant
resource estimate of 1.21 million ounces of gold, 3.72 million ounces of silver
and 94,000 tonnes of zinc. Full details of the resource estimate are included in
an AIM/ASX release dated 19 March 2007.
The discovery cost to date has been less than US$5 per ounce reflecting the lack
of modern exploration in a major gold belt which has produced over 20 million
ounces from mainly surface and alluvial methods.
Leyshon's partner, the Qiqiha'er Brigade of the Heilongjiang Bureau of Geology
and Mineral Resources, one of the largest organizations of its kind in China, is
providing a range of services to the joint venture from its complement of 4,000
technical staff, drill rigs, laboratory and other technical facilities. This
valuable support is enabling the project to rapidly move ahead on an extremely
cost-effective basis.
Competent Persons Statement
The information in this report relating to Exploration Results, Mineral
Resources or Ore Reserves is based on information compiled by Richard Seville, a
director of the Company, who is a member of the Australasian Institute of Mining
and Metallurgy.
Mr Seville has sufficient experience which is relevant to the style of
mineralisation and type of deposit under consideration and to the activity which
he is undertaking to qualify as a Competent Person as defined in the 2004
Edition of the 'Australasian Code for Reporting of Exploration Results, Mineral
Resources and Ore Reserves'. Mr Seville consents to the inclusion in the report
of the matters based on his information in the form and context in which it
appears.
Table 3 - Diamond Drill Results
Hole From To Metres Au g/t Ag g/t Zn %
ZGD154 107 113 6 2.3 25.0 1.0
ZGD155 30 32 2 7.3 17.0 0.1
ZGD155 121 123 2 0.5 4.0 0.1
ZGD155 146 149 3 7.5 31.0 2.6
ZGD156 30 32 2 1.2 26.5 2.1
ZGD156 153 162 9 3.2 14.8 1.2
ZGD156 174.5 180 5.5 1.2 6.8 1.2
ZGD159 73 77 4 0.3 2.3 0.0
ZGD160 109 113 4 5.3 10.0 1.3
ZGD160 138 145 7 3.5 10.4 1.0
ZGD161 109 113 4 13.6 17.0 1.7
ZGD161 148.5 149.5 1 17.6 10.0 0.6
ZGD162 108 113 5 0.9 2.6 0.0
ZGD162 120 125 5 7.9 23.6 1.2
ZGD163 107 113 6 2.3 25.0 1.0
incl. 108 110 2 4.6 17.5 1.4
ZGD164 43 45 2 3.6 28.5 1.7
ZGD165 107 113 6 0.2 2.1 0.1
ZGD165 120 122 2 0.4 2.5 0.2
ZGD165 184 187.5 3.5 0.4 1.3 0.0
ZGD166 145 149 4 1.2 3.9 0.3
ZGD170 78 85 7 3.2 20.3 1.7
ZGD172 9 21 12 3.0 14.1 0.1
ZGD173 10 12 2 7.5 8.0 0.0
ZGD173 117 121 4 0.7 5.8 0.2
ZGD173 124 128 4 0.4 4.8 0.6
ZGD173 131 139.5 8.5 0.9 5.5 0.3
ZGD174 39 45 6 1.9 27.2 2.5
ZGD174 56 58 2 1.4 22.7 1.4
ZGD176 71 79 8 2.1 3.9 0.4
ZGD176 88 92 4 2.8 9.2 1.2
ZGD176 116 118 2 0.7 5.1 0.4
ZGD176 120.5 122 1.5 8.7 20.5 2.9
ZGD176 136 140 4 2.3 11.8 1.2
ZGD176 144 150 6 1.9 13.6 0.7
ZGD176 153 157 4 1.6 6.8 0.3
ZGD177 1 21 20 8.0 13.6 0.1
incl. 5 13 8 19.0 28.8 0.1
ZGD177 74 83 9 1.0 4.4 0.3
ZGD177 86 91 5 1.5 7.0 0.4
ZGD178 9 13 4 0.6 4.4 0.3
ZGD178 34 38 4 3.5 5.4 0.4
ZGD178 42 54 12 1.4 5.3 0.6
ZGD178 76 79 3 2.2 8.8 0.5
ZGD178 121 125 4 3.0 34.9 0.3
ZGD182 4 9 5 0.9 5.0 0.0
Hole From To Metres Au g/t Ag g/t Zn %
ZGD183 65 66 1 1.0 2.2 0.1
ZGD183 82 93 11 2.3 9.0 1.2
ZGD183 93 119 26 3.4 10.2 0.6
ZGD183 127.5 135 7.5 3.1 11.8 0.4
ZGD187 126 131 5 0.9 5.7 0.2
ZGD199 67.5 69 1.5 3.6 18.2 1.5
ZGD203 1 10 9 0.8 4.4 0.0
ZGD203 13 25 12 1.4 4.1 0.1
ZGD203 65 72 7 2.0 9.3 0.2
ZGD207 70 75 5 0.4 4.3 0.6
ZGD210 27 32 5 3.5 4.0 0.1
ZGD210 58 60 2 0.9 2.9 0.1
ZGD212 no significant assays
ZGD216 43 51 8 0.7 2.6 0.2
ZGD216 135.5 141.5 6 2.2 5.5 0.6
ZGD217 92 94 2 2.7 11.7 0.3
ZGD217 135 138 3 1.2 5.4 0.7
ZGD220 125.5 129 3.5 0.5 3.2 0.1
ZGD220 158 162 4 38.5 31.7 0.6
ZGD221 99 104 5 0.6 7.7 0.3
ZGD221 109 115 6 2.3 7.2 0.6
ZGD222 135 139 4 1.1 6.6 0.3
ZGD222 160 167 7 0.6 7.1 0.6
ZGD225 45.5 48 2.5 0.8 4.8 0.2
ZGD225 65 68 3 6.2 35.3 1.2
ZGD226 131 133 2 18.0 14.7 1.1
ZGD226 151 155 4 1.8 3.6 0.1
ZGD226 160 163 4 8.8 19.2 1.6
ZGD226 177 183 6 5.5 13.6 1.3
ZGD227 0 10 10 2.6 15.2 0.0
ZGD227 57 60 3 0.6 6.4 0.6
ZGD228 171 176 5 2.0 8.1 1.5
ZGD228 191 196 5 0.4 2.5 0.4
ZGD228 214 219 5 0.3 4.2 0.3
ZGD229 32.5 36 3.5 1.0 5.9 0.3
ZGD229 47 63 16 4.8 9.2 0.5
incl. 50 55 5 14.1 18.5 1.2
ZGD230 102 106 4 0.4 4.7 0.1
ZGD230 111 124 13 0.6 5.8 0.1
ZGD230 144.5 146 1.5 0.3 3.5 0.2
ZGD230 152 154 2 0.7 6.1 0.2
ZGD231 26 32 6 0.5 1.3 0.0
ZGD231 38 42 4 0.6 4.2 0.1
ZGD231 49 56 7 5.6 13.1 0.3
ZGD231 65 71 6 3.3 13.5 0.4
ZGD231 82 82.5 0.5 2.9 7.0 0.8
ZGD232 73 76 3 6.7 17.3 2.4
ZGD233 143 144 1 1.5 6.6 1.2
ZGD233 185.5 188 2.5 1.9 8.2 0.9
ZGD233 219 222 3 4.7 30.9 1.5
Hole From To Metres Au g/t Ag g/t Zn %
ZGD233 240 244.81 4.81 0.3 3.2 0.3
ZGD235 26 27 1 0.2 4.4 0.4
ZGD236 23.5 26.5 3 0.6 5.9 0.8
ZGD236 33.5 35.5 2 0.9 4.8 0.3
ZGD236 38 43 5 2.7 9.4 0.5
ZGD236 55 56.5 1.5 2.0 5.3 0.2
ZGD236 138 143 5 0.6 12.0 0.2
ZGD237 58 66 8 1.7 8.4 0.4
ZGD237 83 93 10 0.9 8.6 0.4
ZGD239 79 81 2 2.6 7.8 0.4
ZGD239 99 104 5 1.1 5.8 0.1
ZGD240 140 143 3 0.9 6.8 0.5
ZGD240 182 184 2 0.8 4.9 0.2
ZGD241 65 67 2 1.1 6.0 0.3
ZGD241 71 75.5 4.5 0.7 6.1 0.2
ZGD241 94 98 4 1.4 6.7 0.4
ZGD242 102.5 105 2.5 2.3 15.3 0.9
ZGD242 116 118 2 0.8 4.0 0.0
ZGD243 202 207 5 5.6 5.6 0.1
incl. 205 207 2 13.9 11.4 0.1
ZGD243 231 241 10 1.0 10.4 1.3
ZGD243 247 251 4 1.2 10.1 1.8
ZGD244 58 84 26 4.3 18.8 1.0
incl. 73 81 8 10.3 45.0 2.2
ZGD244 128 134 6 2.2 14.5 0.8
ZGD244 140 142 2 3.3 10.7 0.2
ZGD245 94 105 11 1.4 5.2 0.6
ZGD245 110 130 20 1.4 5.3 0.4
ZGD246 117 126 9 2.5 6.7 0.5
ZGD246 138 141 3 3.5 10.1 1.6
ZGD246 162 164 2 1.0 4.5 0.3
ZGD247 30 35 5 0.5 7.1 0.7
ZGD247 188 203 15 1.2 11.1 2.0
incl. 190 193 3 2.1 19.1 5.4
ZGD248 41 43 2 1.8 28.4 1.7
ZGD248 48 52 4 1.4 10.5 0.2
ZGD248 55 57 2 1.4 6.9 0.0
ZGD248 154 160 6 1.5 8.1 1.1
ZGD248 175 183 8 6.5 23.8 2.3
ZGD248 176 181 5 10.0 36.3 3.6
ZGD249 111 124 13 2.0 9.1 1.0
ZGD249 132.5 137 4.5 10.8 22.5 2.3
ZGD249 155 163 8 0.4 4.5 0.5
ZGD249 167 168 1 1.1 3.0 0.1
ZGD250 218 221 3 0.3 4.3 0.1
ZGD250 234 236 2 0.5 2.7 0.1
ZGD251 58 72 14 5.5 8.2 0.4
ZGD251 75 77 2 0.8 4.5 0.3
ZGD251 82 95 13 1.2 7.6 0.5
ZGD251 99 110 11 3.8 20.8 0.8
Hole From To Metres Au g/t Ag g/t Zn %
ZGD251 113 116 3 5.1 11.2 0.6
ZGD251 121 127 6 3.8 15.1 1.2
ZGD251 148 150 2 13.4 10.6 0.7
ZGD251 169 176 7 6.1 13.9 0.2
ZGD252 137 138.5 1.5 2.0 11.9 0.3
ZGD252 142 147 5 0.5 4.2 0.6
ZGD252 156 158 2 20.6 11.4 0.4
ZGD252 179 187 8 3.2 19.3 1.4
ZGD252 191.5 194 2.5 0.8 6.7 1.5
ZGD252 198 201 3 0.4 3.9 0.7
ZGD252 220.5 226 5.5 0.8 4.8 0.4
ZGD252 266 266.5 0.5 4.3 39.4 3.8
ZGD253 66 73 7 3.6 17.8 0.6
ZGD253 105 113 8 1.7 4.5 0.4
ZGD253 137 140 3 0.4 4.7 0.3
ZGD254 113 116 3 0.6 4.9 0.4
ZGD254 125 132 7 5.7 24.9 3.5
ZGD254 165 169 4 0.8 3.5 0.1
ZGD255 141 145 4 1.3 7.8 0.8
ZGD255 211 212 1 13.7 9.6 1.1
ZGD256 91 93 2 4.4 3.3 0.2
ZGD256 97 104 7 4.0 12.7 1.1
ZGD256 112 113 1 19.5 26.9 1.4
ZGD256 119 124 5 5.0 12.1 0.9
ZGD256 139 144 5 6.7 7.1 0.4
ZGD256 151 153 2 1.3 3.7 0.1
ZGD257 70 74 4 0.3 1.8 0.0
ZGD257 84 86 2 0.2 4.8 0.4
ZGD257 100 112 12 0.4 3.6 0.3
ZGD257 139 159 20 2.1 10.1 0.6
ZGD257 162 165 3 0.5 1.2 0.2
ZGD257 175 177 2 0.4 1.8 0.3
ZGD257 194 206 12 1.2 8.9 1.2
ZGD257 220 222 2 0.3 5.3 0.5
ZGD258 24 32 8 2.0 3.8 0.1
ZGD258 149 151 2 5.4 7.3 0.6
ZGD258 181 183 2 1.4 9.0 1.2
ZGD258 187 193 6 3.0 20.4 2.8
ZGD259 34 41 7 1.2 7.7 0.3
ZGD259 63 83 20 5.9 7.6 0.6
ZGD259 88 90 2 0.6 5.4 0.9
ZGD259 93 98 5 0.6 6.9 0.6
ZGD259 122 125 3 0.8 3.5 0.1
ZGD259 152 156 4 2.3 5.9 0.3
ZGD259 165 169 4 0.9 2.4 0.2
ZGD260 149 152 3 0.1 2.2 0.6
ZGD260 162 165 3 0.4 4.7 0.6
ZGD260 185 189 4 0.4 3.9 0.6
ZGD260 201 204 3 1.8 14.3 1.0
ZGD260 211 220 9 1.0 11.6 1.0
ZGD260 237 243 6 0.4 4.1 0.2
Hole From To Metres Au g/t Ag g/t Zn %
ZGD261 41 45 4 0.2 2.6 0.1
ZGD261 70 80 10 1.8 7.3 0.9
ZGD261 90 92 2 0.5 3.6 0.1
ZGD261 102 104 2 2.2 7.1 0.7
ZGD262 22 30 8 1.5 3.0 0.7
ZGD262 68 83 15 7.4 8.3 0.7
ZGD262 96 98 2 0.9 4.7 0.2
ZGD262 124 126 2 0.3 2.7 0.4
Table 4 - RC Results
Hole From To Meters Au g/t Ag g/t Zn %
ZGR1246 1 3 2 0.7 2.5 0.1
ZGR1246 9 12 3 0.7 5.1 0.0
ZGR1246 13 16 3 1.6 4.7 0.0
ZGR1246 19 23 4 0.2 2.1 0.5
ZGR1254 7 10 3 0.8 1.7 0.2
ZGR1254 25 30 5 13.3 35.4 0.4
ZGR1255 2 5 3 0.9 16.7 0.0
ZGR1259 2 6 4 2.0 5.3 0.0
ZGR1260 4 8 4 0.8 1.7 0.1
ZGR1261 7 10 3 0.4 11.1 0.0
ZGR1283 2 4 2 0.7 0.6 0.0
ZGR1284 1 3 2 0.6 0.4 0.0
ZGR1289 8 11 3 1.0 1.2 0.0
ZGR1297 25 28 3 3.3 3.0 0.0
ZGR1298 15 18 3 0.0 0.6 0.7
ZGR1302 22 30 8 0.8 10.4 0.2
ZGR1306 0 3 3 0.3 1.2 0.0
ZGR1307 5 8 3 0.7 1.6 0.0
ZGR1307 28 30 2 3.4 1.4 0.0
ZGR1308 2 4 2 0.5 2.3 0.0
ZGR1313 2 5 3 1.0 1.4 0.1
ZGR1313 20 22 2 0.5 3.5 0.1
ZGR1416 10 11 1 0.5 4.0 0.0
ZGR1417 23 24 1 1.3 5.3 0.1
ZGR1429 10 22 12 0.7 4.1 0.1
ZGR1432 20 22 2 3.8 1.4 0.0
ZGR1615 23 25 2 0.5 0.9 0.0
ZGR1617 6 7 1 0.3 1.0 0.1
ZGR1621 16 17 1 2.0 3.4 0.0
ZGR1625 3 4 1 0.5 1.1 0.1
ZGR1626 0 2 2 0.6 1.5 0.1
ZGR1626 10 13 3 0.5 1.0 0.0
ZGR1634 6 8 2 0.4 2.9 0.2
ZGR1635 4 5 1 0.6 1.0 0.1
ZGR1639 1 3 2 1.4 4.6 0.1
ZGR1645 9 11 2 0.6 6.1 0.1
ZGR1646 15 21 6 1.1 4.7 0.1
ZGR1647 18 20 2 2.4 4.2 0.1
Hole From To Metres Au g/t Ag g/t Zn %
ZGR1649 26 27 1 2.5 1.4 0.0
ZGR1650 14 17 3 1.7 3.7 0.1
ZGR1656 1 7 6 0.4 2.4 0.2
ZGR1661 11 13 2 3.2 21.0 0.2
ZGR1671 3 6 3 0.3 14.9 0.2
ZGR1677 13 17 4 0.7 18.0 0.2
ZGR1677 20 23 3 0.3 4.3 0.5
ZGR1677 26 30 4 0.3 4.0 0.2
ZGR1814 10 12 2 1.8 3.3 0.0
ZGR1825 23 26 3 4.2 6.3 0.2
ZGR1826 28 30 2 0.5 1.6 0.1
ZGR1834 1 4 3 1.9 5.4 0.1
ZGR1840 5 9 4 1.2 7.2 0.2
ZGR1840 23 27 4 3.7 17.1 0.0
ZGR1843 8 15 7 1.2 5.2 0.1
ZGR1845 20 25 5 1.9 7.3 0.2
Diamond Drill Hole Information
Hole Local East Local North Azimuth Dip Hole Depth
ZGD154 9870 49500 90 -60 172.05
ZGD155 9750 49500 90 -60 201.05
ZGD156 9720 49550 90 -60 193.45
ZGD159 9833 49500 90 -60 172.51
ZGD160 9760 49550 90 -60 175.15
ZGD161 9790 49500 90 -60 172.45
ZGD162 9840 49550 90 -60 134.20
ZGD163 9800 49550 90 -60 171.15
ZGD164 10020 49375 90 -60 79.81
ZGD165 9710 49500 90 -63 208.85
ZGD166 10000 49500 90 -70 185.20
ZGD170 9940 49375 90 -60 115.81
ZGD172 10020 49325 90 -60 107.05
ZGD173 9900 49375 90 -60 150.01
ZGD174 9980 49325 90 -60 103.85
ZGD176 9860 49375 90 -60 193.80
ZGD177 9940 49325 90 -60 147.85
ZGD178 9900 49325 90 -60 175.85
ZGD182 10060 49325 90 -60 55.85
ZGD183 9860 49325 90 -60 214.85
ZGD187 9740 49325 90 -60 294.45
ZGD199 9700 49275 90 -60 289.85
ZGD203 9980 49275 90 -60 121.30
ZGD207 9740 49425 90 -60 260.81
ZGD210 10060 49425 90 -60 135.85
ZGD212 10020 49425 90 -60 114.85
ZGD216 9860 49225 90 -60 170.85
ZGD217 9820 49175 90 -60 214.10
ZGD220 9820 49225 90 -60 189.85
ZGD221 9900 49425 90 -60 160.81
ZGD222 9780 49175 90 -60 229.60
Hole Local East Local North Azimuth Dip Hole Depth
ZGD225 9980 49425 90 -60 127.80
ZGD226 9740 49175 90 -60 227.30
ZGD227 9980 49175 90 -60 103.71
ZGD228 9740 49225 90 -60 282.85
ZGD229 9940 49175 90 -60 119.81
ZGD230 9860 49175 90 -60 172.80
ZGD231 9940 49225 90 -60 120.65
ZGD232 9900 49175 90 -60 141.80
ZGD233 9720 49200 90 -60 244.81
ZGD235 9760 49425 90 -60 245.30
ZGD236 9930 49120 90 -60 155.61
ZGD237 9890 49125 90 -60 160.81
ZGD239 9850 49125 90 -60 150.41
ZGD240 9810 49125 90 -60 191.41
ZGD241 9890 49075 90 -60 168.91
ZGD242 9850 49075 90 -60 169.81
ZGD243 9680 49325 90 -60 280.00
ZGD244 9880 49325 90 -60 166.61
ZGD245 9840 49325 90 -60 192.01
ZGD246 9800 49325 90 -60 181.41
ZGD247 9720 49325 90 -60 249.80
ZGD248 9730 49400 90 -60 231.40
ZGD249 9760 49325 90 -60 250.11
ZGD250 9720 49275 90 -60 250.45
ZGD251 9880 49275 90 -60 196.76
ZGD252 9680 49425 90 -60 287.2
ZGD253 9840 49275 90 -60 181.81
ZGD254 9760 49375 90 -60 217.77
ZGD255 9760 49275 90 -60 246
ZGD256 9800 49275 90 -60 202.81
ZGD257 9720 49425 90 -60 236.2
ZGD258 9720 49375 90 -60 241.56
ZGD259 9840 49225 90 -60 175.61
ZGD260 9710 49350 90 -60 267.05
ZGD261 9920 49225 90 -60 110.2
ZGD262 9880 49225 90 -60 161.11
RC Drill Hole Information
Hole ID Local East Local North Azimuth Dip Depth
ZGR1246 10090 49360 0 -90 30
ZGR1254 10170 49360 0 -90 30
ZGR1255 10180 49360 0 -90 18
ZGR1259 10220 49360 0 -90 30
ZGR1260 10230 49360 0 -90 30
ZGR1261 10200 49380 0 -90 30
ZGR1283 9980 49400 0 -90 30
ZGR1284 10020 49400 0 -90 30
Hole ID Local East Local North Azimuth Dip Depth
ZGR1289 10000 49440 0 -90 30
ZGR1297 9920 49440 0 -90 30
ZGR1298 9900 49440 0 -90 30
ZGR1302 9820 49440 0 -90 30
ZGR1306 10040 49460 0 -90 30
ZGR1307 10060 49460 0 -90 30
ZGR1308 10080 49460 0 -90 30
ZGR1313 10120 49480 0 -90 30
ZGR1416 10580 48910 0 -90 30
ZGR1417 10560 48910 0 -90 30
ZGR1429 10580 49030 0 -90 30
ZGR1432 10620 49070 0 -90 30
ZGR1615 9980 49480 0 -90 30
ZGR1617 10020 49480 0 -90 30
ZGR1621 10100 49500 0 -90 30
ZGR1625 10020 49500 0 -90 30
ZGR1626 10000 49500 0 -90 30
ZGR1634 10020 49520 0 -90 30
ZGR1635 10040 49520 0 -90 30
ZGR1639 10120 49520 0 -90 30
ZGR1645 10020 49540 0 -90 30
ZGR1646 10000 49540 0 -90 30
ZGR1647 9980 49540 0 -90 30
ZGR1649 10000 49560 0 -90 30
ZGR1650 10020 49560 0 -90 30
ZGR1656 10140 49580 0 -90 30
ZGR1661 10080 49580 0 -90 30
ZGR1671 10120 49600 0 -90 30
ZGR1677 10100 49620 0 -90 30
ZGR1814 9760 49400 0 -90 30
ZGR1825 9900 49360 0 -90 30
ZGR1826 9920 49360 0 -90 30
ZGR1834 10030 49190 0 -90 30
ZGR1840 10050 49230 0 -90 30
ZGR1843 10050 49210 0 -90 30
ZGR1845 10090 49210 0 -90 30
Notes on presentation of exploration results:
* Drill intersections > 2m and greater than 0.6g/t gold equivalence for
diamond or RC sulphide intercepts or greater than 0.5 g/t gold for oxide
intercepts or if silver and zinc assays have not yet been received.
* RC holes based on > 2m intersections and > 0.3 g/t as used previously for
oxide ore
* No cutting of high values
* Gold analyses are aqua regia digest which has been shown to understate
gold grade compared to fire assay by approximately 10%
This information is provided by RNS
The company news service from the London Stock Exchange
END
DRLFKPKBNBKKFDD
Leyshon Resources (LSE:LRL)
Historical Stock Chart
From Oct 2024 to Nov 2024
Leyshon Resources (LSE:LRL)
Historical Stock Chart
From Nov 2023 to Nov 2024
