RNS Number:1147Q
Leyshon Resources Limited
25 January 2007
25 January 2007
Leyshon reports final drill results at its Zheng Guang project, China
Leyshon Resources Limited ("Leyshon") (ASX & AIM: LRL) today announces the final
drill results of its highly successful 2006 drill programme to extend and
upgrade resources at the Zheng Guang project in Heilongjiang, northeast China.
The assay results from the final 14 of the 52 hole, 13,000 metre diamond
programme and the 588 hole, 16,100 metre reverse circulation programme have been
received.
The mineralisation at Zheng Guang occurs as a series of north south trending,
sub vertical, high grade veins within a broader zone of mineralisation. Hole
ZGD151 was drilled down this zone and intersected 77 metres of mineralisation on
this important section including:
18 metres at 3.25 g/t gold, 15 g/t silver and 1.20 % zinc; and
17 metres at 3.91 g/t gold, 18 g/t silver and 2.65% zinc.
ZGD152 was drilled as a twin of this hole for metallurgical sampling purposes
and has provided further confirmation of the high grade mineralisation with an
intersection of:
26 metres at 7.17 g/t gold, 38 g/t silver and 4.17 %zinc.
ZGD153 was drilled as a twin of the previously reported ZGD128 and intersected
66 metres of mineralisation including:
6 metres at 4.61 g/t gold, 23 g/t silver 2.35% zinc;
15 metres at 3.70 g/t gold, 20 g/t silver and 3.14% zinc; and
26 metres at 8.54 g/t gold, 49 g/t silver and 4.55 % zinc.
also providing good confirmation of the down dip continuity of the
mineralisation in the centre of the Main Ore Zone.
The diamond drilling programme has successfully extended the Main Ore Zone to
the northwest and to depth, but has yet to close off the mineralisation in
either of these directions.
The reverse circulation programme comprised 588 thirty metre deep holes
totalling 16,100 metres of which 364 holes were drilled into the oxide
mineralisation of the Main Ore Zone and 112 holes into each of the exploration
targets at Zheng Guang North and South.
The aim of the Zheng Guang North reverse circulation programme was to identify
additional gold-zinc-silver mineralisation as well as locate shallow oxide gold
mineralisation. The programme has been highly successful in identifying a 300
metre strike length of shallow high grade gold mineralisation.
Significant results included:
3 metres at 10.21 g/t gold (8 - 11 metres in ZGR1021)
9 metres at 7.29 g/t gold (1 - 10 metres in ZGR1027)
5 metres at 4.15 g/t gold (23 - 28 metres in ZGR1046)
16 metres at 4.40 g/t gold (14 - 30 metres in ZGR1099)
These assays are on strike from previously reported assays from ZGR1003 (4
metres at 7.6 g/t gold) and ZGR1011 (10 metres at 1g/t plus 4 metres at 3.77g/t
gold ).
Drill hole ZGR1003 penetrated the sulphide zone returning 7 metres at 3.6% zinc
from 21 metres indicating that the Zheng Guang North gold mineralisation is
zinc-rich at relatively shallow depths.
In addition to these mineralised zones further anomalies have been identified
which will be drill tested in 2007.
Preparation of a revised resource estimate is currently underway and a report
from internationally recognized resource specialists Helman and Schofield of
Australia is expected in early February.
Managing Director Paul Atherley commenting today said "The confirmation of the
continuity of the high grade mineralised zones in the heart of the main orebody
is very encouraging. The results from Zheng Gaung North suggest we may have
discovered an additional resource in the first of the targets to be tested
outside the Main Ore Zone."
For further information contact:
Paul Atherley - Managing Director
Tel: +86 137 1800 1914
Mob: +61 417 475 038
http://www.leyshonresources.com
Background Information
Leyshon is rapidly advancing the Zheng Guang gold zinc project to production
status and is aiming to jointly develop it as the first ever Sino Foreign owned
mine in the mineral rich province of Heilongjiang.
Leyshon's partner, the Qiqiha'er Brigade of the Heilongjiang Bureau of Geology
and Mineral Resources, one of the largest organizations of its kind in China, is
providing a range of services to the joint venture from its complement of 4,000
technical staff, drill rigs, laboratory and other technical facilities. This
valuable support is enabling the project to rapidly move ahead on an extremely
cost effective basis.
Last year's drill programme was the largest to be undertaken in Heilongjiang in
recent years and comprised over 13,000 metres of diamond drilling and 16,100
metres of reverse circulation drilling. It followed the highly successful 21,000
metres of drilling undertaken in 2004 and 2005.
The programme is expected to increase the initial JORC compliant inferred
resource estimate reported in May 2006 of 930,000 ounces gold, 64,000 tonnes
zinc and 2.6 million ounces silver (equivalent to 1.2 million ounces of gold
based on 1 g/t gold = 1% zinc). The estimate has been made by resource
specialists Hellman and Schofield of Australia and is based on the results from
the 2004 and 2005 programmes.
Leyshon has completed its expenditure requirements to earn its 70% interest and
has recently entered into a 20 year agreement with Qiqiha'er Brigade for the
financing, development and mining of the project.
Leyshon has its main operating office in Beijing and is one of the very few
foreign mining companies with its Chairman, Managing Director and Chief
Operating Officer all based in China.
The information in this report relating to Exploration Results, Mineral
Resources or Ore Reserves is based on information compiled by Mr Malcolm Wilson,
a full time employee of the Company, who is a member of the Australasian
Institute of Mining and Metallurgy.
Mr Wilson has sufficient experience which is relevant to the style of
mineralisation and type of deposit under consideration and to the activity which
he is undertaking to qualify as a Competent Person as defined in the 2004
Edition of the 'Australasian Code for Reporting of Exploration Results, Mineral
Resources and Ore Reserves'. Mr Wilson consents to the inclusion in the report
of the matters based on his information in the form and context in which it
appears.
Assays above 0.5g/t Gold Cutoff
Drill Hole Number From To Metres Au Ag Zn
(m) (m) (g/t)* (g/t) (%)
ZGD129 82 85 3 4.85 34 3.64
Incl. 83 84 1 11.97 81 9.78
93 94 1 1.10 7 0.39
121 124 3 1.71 11 0.55
128 142 14 1.20 6 0.90
Incl. 132 133 1 4.37 24 4.90
149 151 2 0.91 7 0.69
155 160 5 1.82 11 1.62
Incl. 158 159 1 5.78 31 5.40
178 184 6 1.30 4 0.43
ZGD132 22 23 1 0.74 1 0.08
81 82 1 1.94 8 0.89
88 91 3 2.20 13 0.80
Incl. 88 89 1 5.45 30 1.94
94 95 1 0.64 3 0.11
102 106 4 4.91 24 0.78
Incl. 104 105 1 12.62 61 1.33
176 188 12 5.20 19 1.22
Incl. 182 184 2 22.29 87 4.87
ZGD135 1 7 6 1.55 7 0.14
Incl. 2 3 1 3.58 12 0.08
12 13 1 4.75 8 0.05
16 20 4 0.79 4 0.05
28 29 1 0.87 5 0.08
35 36 1 0.54 3 0.19
46 51 5 4.25 9 0.42
Incl. 46 47 1 14.04 25 1.30
70 76 6 0.94 6 0.24
87 88 1 0.67 10 0.26
ZGD136 3 5 2 0.71 6 0.11
16 22 6 0.33 4 0.10
27 30 3 1.55 11 0.14
55 58 3 1.93 6 0.34
61 63 2 4.13 9 0.61
66 67 1 0.94 4 0.47
80 82 2 2.92 11 0.52
Incl. 81 82 1 5.09 19 0.94
90 92 2 1.72 7 0.77
95 96 1 7.75 16 2.40
109 110 1 3.67 7 0.69
114 115 1 0.53 6 0.28
118 120 2 2.41 9 1.18
127 129 2 3.17 15 2.17
133 134 1 5.37 28 1.52
142 144 2 1.62 6 0.38
150 152 2 1.49 13 0.58
155 156 1 0.59 4 0.34
Drill Hole Number From To Metres Au Ag Zn
(m) (m) (g/t)* (g/t) (%)
ZGD137 61 62 1 2.47 5 0.19
125 128 3 4.78 11 1.82
Incl. 125 126 1 13.54 28 4.80
131 132 1 3.70 13 4.64
ZGD142 154 156 2 1.55 17 0.60
215 217 2 1.24 7 0.34
221 222 1 0.94 10 0.16
285 290 5 0.84 4 0.27
Incl. 288 289 1 2.38 4 0.48
293 294 1 1.21 3 0.20
312 315 3 1.69 11 0.65
325 326 1 1.31 10 0.84
331 337 6 0.92 6 1.43
Incl. 333 334 1 3.20 23 6.86
340 344 4 0.65 5 0.79
358 359 1 1.43 7 0.56
370 371 1 0.53 6 1.37
376 379 3 3.83 20 2.90
Incl. 377 378 1 7.39 42 3.87
386 387 1 2.06 3 0.01
ZGD143 12 13 1 1.75 11 0.04
55 56 1 0.69 4 0.03
145 148 3 2.24 4 0.12
Incl. 146 147 1 4.23 5 0.04
161 163 2 2.85 7 1.85
186 187 1 0.78 5 0.09
223 224 1 0.67 4 0.10
248 250 2 1.41 8 0.84
276 284 8 2.72 8 0.40
Incl. 281 282 1 15.22 15 0.26
293 294 1 0.51 5 0.03
303 305 2 1.43 8 0.09
ZGD144 79 80 1 1.01 8 0.56
ZGD145 139 140 1 1.25 11 0.32
225 226 1 0.74 4 0.02
237 238 1 40.30 17 0.02
262 263 1 2.08 3 0.01
334 335 1 10.89 77 0.28
359 371 12 0.93 9 1.05
Incl. 364 366 2 2.33 17 2.09
392 393 1 1.12 1 0.02
404 406 2 0.72 4 0.86
416 417 1 3.65 16 1.67
ZGD146 103 104 1 0.50 2 0.03
Drill Hole Number From To Metres Au Ag Zn
(m) (m) (g/t)* (g/t) (%)
ZGD147 242 243 1 0.95 4 0.09
247 248 1 0.62 3 0.11
290 291 1 1.06 1 0.03
308 309 1 1.13 3 0.14
314 315 1 1.26 2 0.05
321 322 1 1.25 7 1.14
330 332 2 1.38 4 0.49
336 343 7 0.69 5 0.27
342 343 1 2.24 17 1.08
355 357 2 5.40 7 0.44
Incl. 356 357 1 9.93 11 0.77
374 375 1 2.02 11 1.16
ZGD151 20 24 4 0.03 1 1.25
33 43 10 0.05 1 1.08
43 61 18 3.25 15 1.20
Incl. 43 45 2 11.00 27 2.04
55 57 2 9.62 56 2.80
64 69 5 2.53 7 0.75
Incl. 65 66 1 5.46 11 0.90
76 77 1 0.75 11 0.53
86 89 3 1.68 4 0.06
92 99 7 1.19 9 1.00
102 104 2 4.11 8 1.04
108 125 17 3.91 18 2.65
Incl. 110 111 1 24.13 92 14.04
Incl. 121 124 3 6.60 34 5.41
129 130 1 0.58 4 0.55
145 147 2 0.68 4 0.39
150 151 1 1.23 4 0.52
158 159 1 0.84 7 0.61
162 163 1 1.23 4 0.33
177 178 1 0.68 2 1.12
Drill Hole Number From To Metres Au Ag Zn
(m) (m) (g/t)* (g/t) (%)
ZGD151 187 188 1 0.50 4 0.22
ZGD152 42 49 7 5.44 17 1.14
Incl. 42 43 1 18.50 42 2.73
54 56 2 2.53 14 1.21
73 76 3 2.52 16 1.23
93 119 26 7.17 38 4.17
Incl. 94 98 4 15.50 75 8.82
Incl. 101 102 1 15.26 88 14.30
Incl. 109 111 2 17.37 21 1.38
Incl. 115 118 3 11.83 102 10.26
122 129 7 1.28 9 0.94
136 137 1 0.70 6 0.84
159 160 1 1.72 8 0.40
165 167 2 0.58 8 0.79
Drill Hole Number From To Metres Au Ag Zn
(m) (m) (g/t)* (g/t) (%)
ZGD153 96 99 3 2.87 16 1.92
106 112 6 4.61 23 2.35
Incl. 110 112 2 9.44 42 3.47
188 193 5 0.82 10 0.59
214 217 3 1.94 17 2.99
220 235 15 3.70 20 3.14
Incl. 233 234 1 20.49 58 9.56
243 251 8 0.87 6 0.90
264 290 26 8.54 49 4.55
Incl. 267 272 5 25.03 144 10.38
Using 0.5g/t cut off and no more than 2 metres of internal waste.
* Preliminary Au results using aqua regia digest on AAS determination on 50gm
charge. Results are subject to confirmation by repeat assay from SGS laboratory
in Tianjin, China.
Diamond Drill Hole Co-Ordinates
Drill Hole No Grid Grid Azim / Bearing* Final Depth (m)
Co-Ord N Co-Ord E
ZGD129 49,350 9,810 -60/000 238.80
ZGD132 49,400 9,800 -60/000 237.05
ZGD135 49,150 9,980 -60/270 129.90
ZGD136 49,305 9,940 -60/270 161.85
ZGD137 49,000 9,825 -60/090 172.35
ZGD142 49,400 9,550 -60/090 388.20
ZGD143 49,350 9,650 -60/090 341.00
ZGD144 49,050 9,950 -60/090 121.55
ZGD145 49,450 9,605 -85/090 432.20
ZGD146 49,000 9,885 -60/090 217.05
ZGD147 49,400 9,510 -60/090 405.70
ZGD151 49,350 9,945 -60/270 194.10
ZGD152 49,350 9,945 -60/270 184.80
ZGD153 49,400 9,865 -60/270 307.30
Significant Assay Results
Drill Hole Number From To Metres Au Ag Zn
(m) (m) (g/t)* (g/t) (%)
ZGD148 36 39 3 6.84 35 0.66
Incl. 37 38 1 16.83 87 1.28
46 49 3 1.80 11 1.27
Incl. 47 48 1 3.36 19 3.10
84 87 3 0.76 4 0.50
132 135 3 3.74 23 0.58
Incl. 134 135 1 7.48 35 0.25
187 190 3 2.20 6 0.56
Incl. 187 188 1 4.87 12 1.39
ZGD149 175 178 3 1.07 6 0.87
217 218 1 0.57 3 0.18
247 248 1 0.57 8 1.19
253 254 1 0.58 9 0.05
ZGD150 18 19 1 1.01 22 1.42
25 26 1 1.00 5 0.04
80 83 3 0.51 6 0.53
86 87 1 0.76 4 0.29
Using 0.5g/t cut off and no more than 2 metres of internal waste.
* Preliminary Au results using aqua regia digest on AAS determination on 50gm
charge. Results are subject to confirmation by repeat assay from SGS laboratory
in Tianjin, China.
Diamond Drill Hole Co-Ordinates
Drill Hole No Grid Grid Azim / Bearing* Final Depth (m)
Co-Ord N Co-Ord E
ZGD148 30,085 19,880 -60/145 202.75
ZGD149 30,040 19,840 -60/145 261.70
ZGD150 30,040 19,800 -60/145 206.75
Note that because the mineralisation strikes at a different angle to that of
Zheng Guang, a separate grid was established. Line 30,000N is aligned at 135O.
Reverse Circulation Assays above 0.3g/t Gold Cutoff
Drill Hole Number From To Metres Au Ag Zn
(m) (m) (g/t)* (g/t) (%)
ZGR1013 4 7 3 0.27 2 0.13
19 22 3 1.30 8 0.67
ZGR1014 14 15 1 0.32 2 0.11
ZGR1015 7 8 1 0.72 2 0.10
ZGR1016 11 22 11 0.68 5 0.57
Drill Hole Number From To Metres Au Ag Zn
(m) (m) (g/t)* (g/t) (%)
ZGR1017 3 9 6 0.60 3 0.26
ZGR1019 15 20 5 1.54 3 0.06
ZGR1020 6 11 5 0.71 2 0.06
ZGR1021 8 11 3 10.21 28 0.34
Incl. 10 11 1 29.64 77 0.76
ZGR1022 10 11 1 0.54 5 0.21
ZGR1027 1 10 9 7.29 9 0.09
Incl. 7 8 1 59.55 66 0.17
ZGR1028 7 14 7 0.81 3 0.14
ZGR1029 0 1 1 0.43 1 0.04
4 5 1 0.38 2 0.08
ZGR1030 0 1 1 0.45 1 0.03
ZGR1031 27 28 1 1.12 8 0.13
ZGR1036 0 2 2 0.56 1 0.03
ZGR1038 20 21 1 0.56 3 0.16
ZGR1039 21 24 3 0.82 36 0.04
27 28 1 0.30 6 0.05
ZGR1040 5 6 1 0.33 3 0.20
ZGR1041 4 5 1 0.33 1 0.10
ZGR1042 8 9 1 1.06 1 0.15
16 20 4 0.54 3 0.14
ZGR1045 5 7 2 3.72 10 0.13
Incl. 6 7 1 7.14 16 0.14
ZGR1046 23 28 5 4.15 10 0.57
Incl. 25 27 2 7.60 13 0.58
ZGR1047 15 17 2 2.87 7 0.13
Incl. 15 16 1 5.36 12 0.13
21 22 1 3.32 8 0.78
ZGR1050 17 19 2 1.01 5 0.15
ZGR1051 13 14 1 0.39 2 0.09
ZGR1052 6 15 9 0.38 1 0.13
Drill Hole Number From To Metres Au Ag Zn
(m) (m) (g/t)* (g/t) (%)
ZGR1053 1 7 6 0.42 1 0.13
11 12 1 1.23 1 0.16
ZGR1056 15 16 1 0.31 2 0.08
ZGR1057 0 5 5 2.00 3 0.16
9 10 1 0.78 3 0.09
ZGR1058 0 8 8 0.99 2 0.13
Incl. 4 5 1 4.39 6 0.14
11 12 1 1.08 5 0.16
ZGR1059 0 1 1 0.48 1 0.04
ZGR1059-1 25 26 1 0.47 3 0.04
ZGR1061 23 30 7 0.61 8 0.76
ZGR1062 6 9 3 1.58 7 0.21
ZGR1063 10 11 1 0.41 3 0.07
ZGR1064 22 23 1 0.44 4 0.04
ZGR1068 4 10 6 0.62 2 0.07
ZGR1071 28 29 1 0.46 4 0.04
ZGR1072 5 8 3 1.40 4 0.12
21 27 6 0.51 3 0.19
ZGR1073 20 22 2 0.54 2 0.29
ZGR1074 2 7 5 1.03 2 0.08
12 15 3 0.75 1 0.09
ZGR1075 12 13 1 0.32 0 0.08
ZGR1080 5 8 3 0.63 9 0.11
ZGR1082 1 2 1 0.31 2 0.07
ZGR1083 22 23 1 0.44 2 0.08
ZGR1085 4 5 1 2.46 8 0.05
14 16 2 1.07 5 0.16
ZGR1088 8 9 1 0.44 4 0.04
13 23 10 0.49 3 0.05
26 31 5 1.08 7 0.23
Incl. 26 27 1 3.08 17 0.64
Drill Hole Number From To Metres Au Ag Zn
(m) (m) (g/t)* (g/t) (%)
ZGR1093 10 11 1 0.38 2 0.40
15 22 7 0.30 2 0.19
ZGR1095 13 14 1 8.15 7 0.24
ZGR1096 26 29 3 1.94 9 0.99
ZGR1097 12 16 4 0.47 4 0.58
ZGR1098 19 20 1 0.56 4 1.25
ZGR1099 14 30 16 4.40 5 0.22
Incl. 22 23 1 34.38 29 0.56
Incl. 25 27 2 10.95 8 0.28
ZGR1102 0 3 3 1.48 2 0.15
ZGR1103 7 9 2 0.35 2 0.05
ZGR1104 7 8 1 0.68 3 0.07
ZGR1107 2 4 2 0.66 3 0.10
10 11 1 0.59 6 0.04
ZGR1110 1 4 3 0.66 3 0.12
17 21 4 0.73 4 0.17
Using 0.3g/t cut off and no more than 2 metres of internal waste.
* Preliminary Au results using aqua regia digest on AAS determination on 50gm
charge. Results are subject to confirmation by repeat assay from SGS laboratory
in Tianjin, China.
Reverse Circulation Drill Hole Co-Ordinates
RC Drill Hole No. Grid Co-ord (N) Grid Co-ord (E) Final Depth (m)
ZGR1001 19,880N 30,160E 28
ZGR1002 19,880N 30,140E 27
ZGR1003 19,880N 30,120E 30
ZGR1004 19,880N 30,180E 29
ZGR1005 19,880N 30,200E 29
ZGR1006 19,880N 30,220E 29
ZGR1007 19,880N 30,240E 30
ZGR1008 19,880N 30,100E 30
ZGR1009 19,920N 30,080E 28
ZGR1010 19,920N 30,100E 31
ZGR1011 19,920N 30,120E 31
ZGR1012 19,920N 30,140E 30
ZGR1013 19,920N 30,160E 30
ZGR1014 19,920N 30,180E 31
ZGR1015 19,920N 30,200E 31
ZGR1016 19,920N 30,220E 30
ZGR1017 19,960N 30,080E 31
ZGR1018 19,960N 30,100E 30
ZGR1019 19,960N 30,120E 30
ZGR1020 19,960N 30,140E 31
ZGR1021 19,960N 30,160E 30
ZGR1022 19,960N 30,180E 31
ZGR1023 19,960N 30,200E 30
ZGR1024 19,960N 30,220E 30
ZGR1025 19,960N 30,240E 30
ZGR1026 19,960N 30,260E 31
ZGR1027 19,840N 30,100E 30
ZGR1028 19,840N 30,120E 30
ZGR1029 19,840N 30,140E 31
ZGR1030 19,840N 30,160E 30
ZGR1031 19,840N 30,180E 30
ZGR1032 19,840N 30,200E 30
ZGR1033 19,840N 30,060E 22
ZGR1034 19,840N 30,080E 30
ZGR1035 19,840N 30,220E 29
ZGR1036 19,840N 30,240E 30
ZGR1037 19,840N 30,260E 30
ZGR1038 19,800N 30,260E 30
ZGR1039 19,800N 30,240E 30
ZGR1040 19,800N 30,220E 30
ZGR1041 19,800N 30,200E 30
ZGR1042 19,800N 30,180E 30
ZGR1043 19,800N 30,160E 30
ZGR1044 19,800N 30,140E 30
ZGR1045 19,800N 30,120E 30
ZGR1046 19,800N 30,100E 31
ZGR1047 19,800N 30,080E 30
ZGR1048 19,800N 30,060E 30
ZGR1049 19,760N 30,260E 30
ZGR1050 19,760N 30,240E 30
ZGD1051 19,760N 30,220E 30
ZGR1052 19,760N 30,200E 30
ZGR1053 19,760N 30,180E 30
ZGR1054 19,760N 30,160E 31
ZGR1055 19,760N 30,140E 30
ZGR1056 19,760N 30,120E 31
ZGR1057 19,760N 30,100E 30
ZGR1058 19,760N 30,080E 31
ZGR1059 19,760N 30,060E 31
ZGR1060 19,720N 30,060E 30
ZGR1061 19,720N 30,080E 30
ZGR1062 19,720N 30,100E 30
ZGR1063 19,720N 30,120E 30
ZGR1064 19,720N 30,140E 29
ZGR1065 19,720N 30,160E 30
ZGR1066 19,720N 30,180E 30
ZGR1067 19,720N 30,200E 30
ZGR1068 19,720N 30,220E 30
ZGR1069 19,720N 30,240E 31
ZGR1070 19,680N 30,260E 28
ZGR1071 19,680N 30,260E 30
ZGR1072 19,680N 30,240E 30
ZGR1073 19,680N 30,220E 31
ZGR1074 19,680N 30,200E 30
ZGR1075 19,680N 30,180E 31
ZGR1076 19,680N 30,160E 30
ZGR1077 19,680N 30,140E 30
ZGR1078 19,680N 30,120E 30
ZGR1079 19,680N 30,100E 30
ZGR1080 19,680N 30,080E 31
ZGR1081 19,680N 30,060E 30
ZGR1082 19,860N 30,060E 30
ZGR1083 19,860N 30,080E 30
ZGR1084 19,860N 30,100E 30
ZGR1085 19,860N 30,120E 30
ZGR1086 19,860N 30,140E 31
ZGR1087 19,860N 30,160E 30
ZGR1088 19,860N 30,180E 31
ZGR1089 19,860N 30,200E 30
ZGR1090 19,860N 30,220E 31
ZGR1091 19,860N 30,240E 31
ZGR1092 19,860N 30,260E 30
ZGR1093 19,900N 30,260E 30
ZGR1094 19,900N 30,240E 30
ZGR1095 19,900N 30,220E 30
ZGR1096 19,900N 30,200E 31
ZGR1097 19,900N 30,180E 30
ZGR1098 19,900N 30,160E 30
ZGR1099 19,900N 30,140E 31
ZGR1100 19,900N 30,120E 30
ZGR1101 19,900N 30,100E 30
ZGR1102 19,900N 30,080E 30
ZGR1103 20,000N 30,000E 30
ZGR1104 20,000N 30,020E 30
ZGR1105 20,000N 30,040E 31
ZGR1106 20,000N 30,060E 30
ZGR1107 20,000N 30,080E 30
ZGR1108 20,000N 30,100E 30
ZGR1109 20,000N 30,120E 31
ZGR1110 20,000N 30,140E 31
ZGR1111 20,000N 30,160E 30
ZGR1112 20,000N 30,180E 30
This information is provided by RNS
The company news service from the London Stock Exchange
END
DRLOKPKBNBKKODB
Leyshon Resources (LSE:LRL)
Historical Stock Chart
From May 2024 to Jun 2024
Leyshon Resources (LSE:LRL)
Historical Stock Chart
From Jun 2023 to Jun 2024