Waymar Intersects 17.5 m of 5.2 g/t Gold, 38.1 m of 2.3 g/t Gold, 10.2 m of 4.9 g/t Gold and Multiple Zones of High Grade Gol...
November 26 2012 - 7:00AM
Marketwired Canada
Waymar Resources Ltd. ("Waymar" or the "Company") (TSX VENTURE:WYM) is pleased
to report significant results from five additional diamond drill holes on its
Anza deposit, Antioquia Department, Colombia. These holes are part of an overall
drilling program that continues to expand the Anza deposit along the Aragon
fault and to identify and delineate high grade gold, silver and zinc
mineralization.
Highlights
Drill hole MAP-51 confirmed the continuity of the high grade gold zone
identified in drill holes MAP-21 and MAP-38. It also intersected a new high
grade gold zone near the end of the hole. These gold intercepts also contain
significant zinc grades, as follows:
-- 17.5 m of 5.2 g/t Au and 1.5% Zn, including 7.0 m of 12.4 g/t Au and
3.6% Zn.
-- 38.1 m of 2.3 g/t Au and 3.9% Zn, including 6.0 m of 8.4 g/t Au and 5.3%
Zn.
Drill hole MAP-53 tested the zone between drill holes MAP-28 and MAP-43. It
intersected very significant and near-continuous mineralized widths, including
two zones of high grade gold. Significant intercepts include:
-- 9.0 m of 3.2 g/t Au, including 3.0 m of 7.1 g/t Au.
-- 10.2 m of 4.9 g/t Au, including 3.0 m of 12.5 g/t Au.
-- 11.0 m of 2.1 g/t Au.
-- 16.5 m of 2.4 g/t Au.
Drill holes MAP-49 and MAP-50 tested the zone of high grade gold previously
identified in holes MAP-24, MAP-11, MAP-42, MAP-20, MAP-33 and MAP-48.
Significant intercepts include:
-- 1.0 m of 6.8 g/t Au (MAP-49).
-- 17.8 m of 1.1 g/t Au (MAP-49).
-- 1.5 m of 10.1 g/t Au (MAP-50).
Drill hole MAP-52 was lost due to technical difficulties before reaching its
target depth and a predicted high grade gold zone but intersected significant
zinc mineralization, as follows:
-- 75.9 m of 1.5% Zn, including 8.2 m of 4.8% Zn at the end of the hole.
"Our drilling continues to expand the high grade gold zones and to identify new
ones", commented Pablo Marcet, President of Waymar. "This batch of five drill
holes intersected seven zones grading better than 5 g/t gold, as well as
significant widths of continuous gold and zinc mineralization."
Details
Mineralization at Anza, as shown by drilling results, extends at least 2,500
metres along the Aragon Fault. The deposit remains open to the north and south,
as well as down-dip. Other targets in the area, including those recently
identified by soil geochemistry in the immediate vicinity of the deposit and
others identified through airborne geophysics, are being prepared for drilling.
A summary of significant results in these drill holes is listed in the following
table:
----------------------------------------------------------------------------
From To Interval Au Ag Zn
Hole Number (m) (m) (m) (g/t) (g/t) (%)
----------------------------------------------------------------------------
MAP-49 41.3 48.8 7.5 0.31 3.12 0.07
------------------------------------------------------------
48.8 120.6 71.8 0.21 0.72 1.00
------------------------------------------------------------
including 100.0 101.0 1.0 6.77 3.10 4.21
------------------------------------------------------------
including 110.0 120.6 10.6 0.49 1.40 0.30
------------------------------------------------------------
200.5 206.5 6.0 0.33 2.36 0.01
------------------------------------------------------------
209.2 227.0 17.8 1.08 8.86 0.03
------------------------------------------------------------
including 219.6 227.0 7.4 2.15 16.80 0.06
----------------------------------------------------------------------------
MAP-50 64.5 68.9 4.4 1.15 6.38 0.43
------------------------------------------------------------
79.3 83.9 4.6 1.13 6.10 0.36
------------------------------------------------------------
136.0 137.5 1.5 10.05 0.80 0.23
------------------------------------------------------------
158.0 171.5 13.5 0.56 0.77 0.33
----------------------------------------------------------------------------
MAP-51 38.1 44.2 6.1 0.08 1.02 3.22
------------------------------------------------------------
44.2 56.4 12.2 0.41 6.55 0.96
------------------------------------------------------------
59.5 65.6 6.1 0.75 11.33 0.07
------------------------------------------------------------
69.0 85.4 16.4 0.68 16.18 0.09
------------------------------------------------------------
148.0 160.2 12.2 0.89 6.52 1.81
------------------------------------------------------------
197.5 215.0 17.5 5.16 1.16 1.49
------------------------------------------------------------
including 197.5 204.5 7.0 12.40 2.13 3.63
------------------------------------------------------------
including 201.6 203.3 1.7 37.00 5.40 13.80
------------------------------------------------------------
295.5 333.5 38.1 2.27 2.94 3.85
------------------------------------------------------------
including 299.0 305.0 6.0 8.39 4.12 5.27
------------------------------------------------------------
including 303.5 305.0 1.5 22.90 8.40 6.06
------------------------------------------------------------
including 317.6 318.8 1.2 5.88 21.30 36.00
------------------------------------------------------------
344.6 356.5 12.0 0.63 10.99 1.03
----------------------------------------------------------------------------
MAP-52 72.0 147.9 75.9 0.10 1.47 1.52
------------------------------------------------------------
including 139.7 147.9 8.2 0.04 1.52 4.82
------------------------------------------------------------
including 146.9 147.9 1.0 0.08 5.50 22.30
----------------------------------------------------------------------------
MAP-53 92.8 100.5 7.7 0.68 2.28 0.21
------------------------------------------------------------
106.5 112.5 6.0 0.34 1.50 0.49
------------------------------------------------------------
139.5 143.5 4.0 0.43 0.55 0.07
------------------------------------------------------------
148.0 157.0 9.0 3.21 0.66 0.33
------------------------------------------------------------
including 148.0 151.0 3.0 7.12 0.95 0.42
------------------------------------------------------------
183.4 193.5 10.2 4.88 2.44 1.13
------------------------------------------------------------
including 190.5 193.5 3.0 12.48 3.35 1.87
------------------------------------------------------------
196.1 205.0 8.8 0.63 2.35 0.61
------------------------------------------------------------
207.5 218.5 11.0 2.09 3.44 0.31
------------------------------------------------------------
232.5 249.0 16.5 2.35 2.58 1.23
------------------------------------------------------------
252.0 258.0 6.0 0.66 0.40 0.28
------------------------------------------------------------
268.0 279.1 11.1 1.04 1.24 0.57
----------------------------------------------------------------------------
The intervals in the above table refer to the actual core length and may not
represent the true width of the mineralization due to the limited geological
knowledge of the deposit at this time.
Since the Company's last news release of drilling results on October 9, 2012, an
extra 1,342 metres have been drilled and assayed on the Anza deposit, for a
total of 17,408 metres drilled and assayed since the start of the drill
programme in April 2011.
The diamond drill holes statistics are as follows:
----------------------------------------------------------------------------
Total
Hole Northing Easting Elevation Azimuth Dip Depth
Number (m) (m) (m) (degrees) (degrees) (m)
----------------------------------------------------------------------------
MAP-49 694562 399846 1085 090 -45 236.4
----------------------------------------------------------------------------
MAP-50 694562 399846 1085 090 -65 227.2
----------------------------------------------------------------------------
MAP-51 694663 399871 1131 090 -65 388.9
----------------------------------------------------------------------------
MAP-52 694712 399916 1106 090 -70 147.9
----------------------------------------------------------------------------
MAP-53 694795 400046 1074 300 -65 341.6
----------------------------------------------------------------------------
Drill hole location maps can be found on the Waymar website at the following
link: www.waymarresources.com/projects/maps/.
Technical Information
The analytical procedures for silver and zinc use an aqua regia digestion with
an Atomic Absorption Spectroscopy (AAS) finish (Ag-AA46 and Zn-AA46). The
analytical procedure for gold is a 30 gram nominal sample weight and analysis by
fire assay and AAS (Au-AA23). If the assay result is over 10 g/t then a 30 gram
nominal sample weight and analysis by fire assay and gravimetric finish is
undertaken (Au-GRA21). All core samples were prepared in Medellin, Colombia, and
assayed in Lima, Peru, by ALS Group Laboratories which are ISO 9001:2008
certified.
An industry standard Quality Control and Quality Assurance program, which
includes Standard Reference Materials, blanks and duplicates is established and
followed during the drill program. A complete QA/QC statistical analysis is
presently being undertaken for the company by Micon International Limited.
Analysis of the QA/QC results so far indicates that the assay results from the
drill program are within industry standards.
David Makepeace, M.Eng., P.Eng., senior geologist for Micon International
Limited is the qualified person for this drill program, as defined by National
Instrument 43-101. He has reviewed and verified the technical disclosure
contained herein and accepts responsibility for such disclosure.
Any potential quantity and grades are conceptual in nature. There has been
insufficient exploration to define a mineral resource at the Anza property to
date, and it is uncertain if further exploration will result in targets being
delineated as part of a mineral resource.
About Waymar Resources Ltd.
Waymar Resources Ltd. is a Canadian mineral exploration company with an option
to acquire 100% interest in the Anza project located in the west of the
Antioquia Department in the Republic of Colombia. Upon exercise of the option,
the optionors will retain a 2% net smelter return royalty on that portion of the
Anza property governed by the Option Agreement, one-half of which may be
purchased by Waymar for a cash payment of US$1,000,000. Waymar also has 100%
ownership of certain properties surrounding Anza that cover the district's
mineral potential and is continually seeking opportunities to acquire
exploration properties. Colombia is a significant producer of gold, nickel,
emeralds, petroleum and natural gas as well as a leading producer of coal in
Latin America.
WAYMAR RESOURCES LTD.
Pablo Marcet, President & CEO
This press release may contain "forward looking statements" and "forward-looking
information" within the meaning of applicable Canadian securities legislation.
Generally, forward-looking information can be identified by the use of
forward-looking terminology such as "plans", "expects", "estimates", "intends",
"anticipates" or "believes" or variations of such words and phrases or state
that certain actions, events or results "may", "could", "would", "might", or
"will be taken", "occur", or "be achieved". Forward-looking information is based
on the reasonable assumptions, estimates, intentions, analysis and opinions of
Waymar made at the date that such statements are made. Forward-looking
information is subject to known and unknown risks, uncertainties and other
factors that may cause the actual results, level of activity, performance or
achievements of Waymar to be materially different from those expressed or
implied by such forward-looking information, including the risk factors
disclosed elsewhere in Waymar's public disclosure. Accordingly, readers should
not place undue reliance on forward-looking information. The forward-looking
information contained herein is presented for the purposes of assisting
investors in understanding Waymar's plans and objectives and may not be
appropriate for other purposes. Waymar does not undertake to update any
forward-looking information, except in accordance with applicable securities
laws.
Shares Outstanding: 46,945,170
FOR FURTHER INFORMATION PLEASE CONTACT:
Waymar Resources Ltd.
Investor Relations
1-778-373-0100
info@waymarresources.com
www.waymarresources.com
Waymar Resources Ltd (TSXV:WYM)
Historical Stock Chart
From Oct 2024 to Nov 2024
Waymar Resources Ltd (TSXV:WYM)
Historical Stock Chart
From Nov 2023 to Nov 2024
