Channel Resources: Drilling Results Continue to Enhance Potential of Mankarga 5 Zone at Tanlouka Gold Project, Burkina Faso
May 23 2012 - 9:00AM
Marketwired Canada
Channel Resources Ltd. ("Channel" or the "Company") (TSX VENTURE:CHU) is pleased
to report additional assay results from its 15,000 metre core definition
drilling program, completed in February 2012, on the Mankarga 5 gold deposit at
the Tanlouka Gold Project ("Tanlouka") in Burkina Faso, West Africa.
Results reported in this release are from infill holes along nominal 100 metre
spaced lines and targeting extensions of previously encountered mineralized
structures. Highlighted intersections from this set of results include holes
Tan11-DD47 and Tan11-DD40, drilled on Sections 350NE and 000 respectively. Hole
DD47 intersected two principal structures including 55 metres of 2.05 g/t Au
from surface (#1 Zone) and a second structure starting at 86.5 metres down-hole
for 48 metres at 1.09 g/t Au (#2 Zone). Hole DD40, drilled 350 metres along
strike to the southwest on section 000, intersected the #1 Zone at approximately
120 metres below surface with 1.46 g/t Au over a width of 45 metres. Other drill
hole intersections reported in this news release, including those on sections
1200SW, 700SW, 400SW, 100SW, 100NE and 750NE, have widths and grades largely in
line with expectations for these parts of the deposit.
The Mankarga 5 core-drilling program was completed in February of 2012, with
over 15,400 metres in 71 holes drilled. Assay results have now been reported for
an aggregate of 13,779 metres of core (89% of total program) from 61 holes,
including 1,731 metres from the ten holes reported in this release. A protracted
delay in receiving final results from assay labs in Ouagadougou has delayed the
finalization of Tanlouka's maiden resource estimate; however, results from the
last ten holes of this program are expected to be available soon.
The drilling program has so far delineated a mineralized zone that is over two
kilometres long and up to 300 metres wide on the northeast-trending Mankarga 5
structure. The main objectives of this program have been to provide a geological
and structural context for the deposit, to further expand the zone and to
support the deposit's maiden resource estimate. Mineralized zones are steeply
dipping to the northwest, the majority extending from surface, and reported
widths for all holes drilled at -50 degrees to azimuth 120 degrees (southeast)
are believed to be in the range of 80 - 90% of true width. The deposit remains
open along strike and to-depth, with mineralization encountered to a maximum
vertical depth of approximately 260 metres in the current program.
Detailed results from the ten holes reported in this release are presented in
order of their location on eight sections on the Mankarga 5 grid in Appendix A
to this release, and can be viewed on a drill hole location map presented on the
Company's website at http://www.channelresources.ca/i/pdf/CHUmap052312.pdf.
Mankarga 5 cross sections are also available for download at
http://www.channelresources.ca/s/Tanlouka.asp. Please refer to Channel's
drilling, sampling and assay reporting practices below the results tables for
further information on how the results are reported.
Note re QA/QC Testing Procedures
Channel Resources Ltd. maintains a rigorous quality control program involving
the use of duplicate samples and blanks and certified gold standards from an
accredited Canadian laboratory in every batch of 20 samples. Core samples are
assayed using standard fire assay techniques on a 50-gram charge with an atomic
absorption finish by SGS Burkina Faso SA and Abilab Burkina SARL (ALS Laboratory
Group) in Ouagadougou, Burkina Faso. RC samples discussed in this release were
assayed using the same methods at Abilab Burkina SARL (ALS Laboratory Group) in
Ouagadougou. The drilling program is supervised by John Adams P.Geo., a
qualified person as defined by NI 43-101, who has reviewed the contents of this
news release.
Some of the statements contained herein are forward-looking statements, which
involve known and unknown risks and uncertainties. Without limitation,
statements regarding potential mineralization and resources, exploration
results, and future plans and objectives of the Company are forward looking
statements that involve various degrees of risk. The following are important
factors that could cause the Company's actual results to differ materially from
those expressed or implied by such forward looking statements: changes in the
price of minerals, general market conditions, risks inherent in mineral
exploration, risks associated with development, construction and mining
operations, the uncertainty of future profitability and the uncertainty of
access to additional capital. The Company undertakes no obligation to update
publicly or otherwise revise any forward-looking statements or the foregoing
list of factors, whether as a result of new information or future events or
otherwise. Further disclosure on risk factors is available in the Company's
various corporate filings at www.sedar.com.
APPENDIX A - Significant Assay Results
Presented in Order of Section Line from SW to NE
----------------------------------------------------------------------------
Interval Weighted
(metres) Intercept Average Grade
Hole Number From To (metres) (g/t Au)
----------------------------------------------------------------------------
Section 1200 SW
----------------------------------------------------------------------------
Tan11-DD61 85.0 89.5 4.5 0.67
--------------------------------------------
Hole length 220m 112.0 124.0 12.0 0.43
--------------------------------------------
-50 degrees /120
degrees azimuth
----------------------------------------------------------------------------
Section 700 SW
----------------------------------------------------------------------------
Tan12-DD65 122.5 127.0 4.5 0.90
--------------------------------------------
Hole length 275m 130.0 169.0 39.0 1.45
--------------------------------------------
-50 degrees/120 includes 158.5 160.0 1.5 5.01
degrees azimuth --------------------------------------------
and 166.0 167.5 1.5 13.10
--------------------------------------------
202.0 206.5 4.5 1.95
----------------------------------------------------------------------------
Section 400 SW
----------------------------------------------------------------------------
Tan11-DD51 92.5 107.5 15.0 0.80
--------------------------------------------
Hole length 254.5m 154.0 1570 3.0 1.72
--------------------------------------------
-50 degrees/120 172.0 182.5 10.5 0.21
degrees azimuth --------------------------------------------
184.0 194.5 10.5 0.25
----------------------------------------------------------------------------
Section 100 SW
----------------------------------------------------------------------------
Tan11-DD43 6.0 13.5 7.5 0.36
--------------------------------------------
Hole length 159m 69.0 115.5 46.5 1.18
--------------------------------------------
-50 degrees/120 includes 99.0 100.5 1.5 8.83
degrees azimuth
----------------------------------------------------------------------------
Section 000
----------------------------------------------------------------------------
Tan11-DD40 88.0 92.5 4.5 0.72
--------------------------------------------
Hole length 242m 100.0 115.0 15.0 0.59
--------------------------------------------
-50 degrees/120 142.0 187.0 45.0 1.46
degrees azimuth --------------------------------------------
includes 172.0 173.5 1.5 30.00
----------------------------------------------------------------------------
Section 100 NE
----------------------------------------------------------------------------
Tan12-DD71 124.5 136.5 12.0 0.44
--------------------------------------------
Hole length 252m 139.5 150.0 10.5 0.44
--------------------------------------------
-50 degrees/120 156.0 192.0 36.0 1.14
degrees azimuth --------------------------------------------
includes 171.0 172.5 1.5 8.91
--------------------------------------------
175.5 177.0 1.5 6.78
----------------------------------------------------------------------------
Section 350 NE
----------------------------------------------------------------------------
Tan11-DD47 0.0 55.0 55.0 2.05
--------------------------------------------
Hole length 169m includes 9.5 11.0 1.5 21.8
--------------------------------------------
-50 degrees/120 and 26.0 27.5 1.5 12.5
degrees azimuth --------------------------------------------
73.0 80.5 7.5 0.43
--------------------------------------------
86.5 134.5 48.0 1.09
--------------------------------------------
includes 95.5 97.0 1.5 6.04
----------------------------------------------------------------------------
Section 750 NE
----------------------------------------------------------------------------
Tan12-DD63 6.0 7.5 1.5 3.91
--------------------------------------------
Hole length 198m 28.5 43.5 15.0 0.37
--------------------------------------------
-50 degrees/120
degrees azimuth
----------------------------------------------------------------------------
NB: Tan12-DD64 on Section 700 SW was terminated for technical reasons at
49.5 metres and re-drilled as DD65.
Hole Tan11-DD35 on Section 100NE - was collared in the footwall of the #2
Zone and had no significant intersections.
Drilling, sampling and reporting practices:
-- All hole collars are set to dip at -50 degrees to their respective
azimuths.
-- Core holes are sampled geologically with a maximum sample interval of
1.5 metres.
-- "Mineralized rock" is defined as rock with a grade of over 0.10 g/t Au.
-- "Significant assay results" is defined as samples, or series of
consecutive samples, with grade thickness (i.e. weighted average gold
grades multiplied by their intervals), of greater than 2.0.
-- The amount of internal waste (i.e. with a grade of less than 0.10 g/t
Au) included in a reported mineralized interval does not exceed 10%.
-- No top cut has been applied to the individual grades before weighted
average grades have been calculated.
-- Unless otherwise stated, reported intersections are downhole lengths.
True widths, other than as estimated on each section, shall be
determined once geological modeling of the zone has been completed.
Channel Resources Ltd. (TSXV:CHU)
Historical Stock Chart
From Jun 2024 to Jul 2024
Channel Resources Ltd. (TSXV:CHU)
Historical Stock Chart
From Jul 2023 to Jul 2024
