RMED Ra Medical Systems Inc

Investing in our common stock involves a high degree of risk. You should carefully consider the risks and uncertainties described below, together with all of the other information in this Annual Report on Form 10-K, before making an investment decision. The risks and uncertainties described below may not be the only ones we face. If any of the risks actually occur, our business, financial condition, operating results, cash flows and prospects could be materially and adversely affected. In that event, the market price of our common stock could decline, and you could lose part or all of your investment.

Risk Factor Summary

Risks Related to Our Financial Position and Need for Additional Capital

Risks Related to Our Business and Products

22

Risks Related to Government Regulation and our Industry

Risks Related to our Intellectual Property

Risks Related to Ownership of Our Common Stock

Risks Related to Our Financial Position and Need for Additional Capital

We may be required to raise additional funds to finance our operations and remain a going concern; We may not be able to do so when necessary, and/or the terms of any financings may not be advantageous to us.

We are no longer pursuing Ra Med’s historical lines of business and have instead determined to move forward with Catheter’s products following our acquisition of Catheter. Catheter’s operations to date have consumed substantial amounts of cash and Catheter has sustained negative cash flows from Catheter’s operations for the last several years. The Catheter business may require future additional capital infusions including public or private financing, strategic partnerships or other arrangements with organizations that have capabilities and/or products that are complementary to Catheter’s own capabilities and/or products, in order to execute our strategic vision. However, there can be no assurances that we can complete any financings, strategic alliances or collaborative development agreements, and the terms of such arrangements may not be advantageous to us. In addition, any additional equity financing will be dilutive to our current stockholders, and debt financing, if available, may involve restrictive covenants. If we raise funds through collaborative or licensing arrangements, we may be required to relinquish, on terms that are not favorable to us, rights to some of our technologies or product candidates that we would otherwise seek to develop or commercialize. Our failure to raise capital when needed could materially harm our business, financial condition, and results of operations.  See “—We have entered into joint marketing agreements with respect to our products, and may enter into additional join marketing agreements, that will reduce our revenues from product sales,” and “—Royalty agreements with respect to our surgical vessel closing pressure device in development will reduce any future revenues from this product.”

23

Our business has a history of losses and will incur additional losses, and we may never achieve profitability.

Our only current business is conducted through Catheter, our wholly owned subsidiary, which currently derives revenues from the View into Ventricular Onset System or VIVO™ System (“VIVO” or “VIVO System”). In the past, Catheter generated revenue from the sales of the Amigo® Remote Catheter System (“Amigo”), the business line of which Catheter discontinued in 2017. VIVO is currently in the research and development phase for a generation 2 product. While Catheter does generate revenue, Catheter is still operating at a loss, and there is no guarantee that Catheter will be able to grow the revenues enough to offset Catheter’s costs to realize profitability. To date, Catheter has not been profitable, and Catheter’s accumulated deficit was approximately $116.9 million and $110.5 million at December 31, 2022 and December 31, 2021, respectively. Catheter’s losses have resulted principally from costs incurred in research and development, and from general and administrative costs associated with Catheter’s operations. In order to commercialize Catheter’s assets, we will need to conduct substantial additional research, development and clinical trials. Catheter will also need to receive necessary regulatory clearances in the United States and obtain meaningful patent protection for and establish freedom to commercialize Catheter’s product candidates. We must also complete further clinical trials and seek regulatory approvals for any new product candidates Catheter discovers, licenses or acquires. We cannot be sure whether and when we will obtain required regulatory approvals, or successfully research, develop, commercialize, manufacture and market any other product candidates. We expect that these activities, together with future general and administrative activities, will result in significant expenses for the foreseeable future. We may never achieve profitability.

Risks Related to Our Business and Products

We will not be able to reach profitability unless we are able to achieve our product expansion and growth goals.

Our goal to achieve profitability is dependent upon establishing VIVO as an integral tool used by cardiac electrophysiologists during ablation treatment of ventricular arrhythmias, as well as upon developing and marketing new products, such as our wound closure product that is under development.  In today’s healthcare environment, the process for new technologies to be adopted and penetrate market share has become more complex, with the need to win over multiple stakeholders within clinical, administrative and support teams in hospitals, and increasingly we must target the administrators in integrated delivery networks. To accomplish this, we will need to:

24

Our research and development and commercialization efforts may depend on entering into agreements with corporate collaborators.

We may need seek out additional collaborations in order to commercialize Catheter’s products. We will continue to seek research collaborations, co-development and marketing agreements, and licensing deals for Catheter’s products in development; however, there is no guarantee that we will be successful in our efforts. Any collaborator with whom we may enter into such collaboration agreements may not support fully our research and commercial interests since our program may compete for time, attention and resources with such collaborator’s internal programs. Therefore, these future collaborators may not commit sufficient resources to our program to move it forward effectively, or the program may not advance as rapidly as it might if we had retained complete control of all research, development, regulatory and commercialization decisions.

We have entered into joint marketing agreements with respect to our products, and may enter into additional join marketing agreements, that will reduce our revenues from product sales.

Catheter entered into a Joint Marketing Agreement with Stereotaxis, Inc. in January 2021, as subsequently amended in January 2022 and May 2022, pursuant to which Stereotaxis agrees to promote our VIVO System to customers who may benefit from the use of VIVO in robotic or non-robotic electrophysiology procedures. Pursuant to the agreement, Stereotaxis can perform promotional activity at any hospital globally that has a Stereotaxis Robotic Magnetic Navigation System, referred to herein as a robotic hospital, and where VIVO has appropriate regulatory clearances. In addition, Stereotaxis will act as a spot distributor for us at mutually agreed upon hospitals where the VIVO System is included as a line item within a Stereotaxis quote. In exchange for its marketing, distribution and support activity, Stereotaxis receives a payment equal to 45% of the revenue generated from VIVO at robotic hospitals. After the initial sale of VIVO products to customers by Stereotaxis, Catheter will be responsible for selling additional VIVO-related products to the customers but will continue to owe the 45% payment to Stereotaxis with respect to any such sales. The agreement has a term that runs through December 31, 2023, provided however, that the agreement will automatically extend for successive two-year terms unless either party provides the other written notice of termination at least one year prior to the next-scheduled termination date. Stereotaxis will continue to be entitled to receive the 45% payments described above for a period of six months following termination of the agreement.  Although we believe that this agreement is in the best interest of our business and our stockholders, it will material reduce the revenues that we receive from VIVO products that are sold by Stereotaxis, and any similar agreements entered into in the future may have the same impact.

Royalty agreements with respect to our surgical vessel closing pressure device in development will reduce any future profits from this product.

In February 2022, Catheter agreed to an assignment and royalty agreement for the Surgical Vessel Closing Pressure Device, which is under development. Pursuant to the agreement, Catheter agreed to pay a royalty fee of 5% on net sales up to $1 million. Thereafter, if a patent for the Surgical Vessel Closing Pressure Device is obtained from the U.S. Patent and Trademark Office, Catheter will pay a royalty fee of 2% of net sales up to a total of $10 million in royalties. In addition, at the time of our merger with Catheter, additional royalty rights with respect to the Surgical Vessel Closing Pressure Device were granted to certain holders (the “Noteholders”) of Catheter’s outstanding convertible promissory notes in exchange for forgiveness of the interest that had accrued under those notes but remained unpaid, pursuant to the terms of certain Debt Settlement Agreements. The agreements provide for the Noteholders to receive, in the aggregate, approximately 12% of the net sales, if any, of the Surgical Vessel Closing Pressure Device, commencing upon the first commercial sale through December 31, 2035. As a result, even if the Surgical Vessel Closing Pressure Device is successfully developed and marketed, our revenues from this device will be reduced by the amount of these royalties.

If we experience significant disruptions in our information technology systems, our business may be adversely affected.

We depend on our information technology systems for the efficient functioning of our business, as well as for accounting, financial reporting, data storage, compliance, purchasing and inventory management. We do not have redundant information technology systems at this time. Our information technology systems may be subject to computer viruses, ransomware or other malware, attacks by computer hackers, failures during the process of upgrading or replacing software, databases or components thereof, power outages, hardware failures,

25

telecommunication failures and user errors, among other malfunctions. In addition, a variety of our software systems are cloud-based data management applications hosted by third-party service providers whose security and information technology systems are subject to similar risks. Technological interruptions would impact our business operations would disrupt our operations, including our ability to timely ship and track product orders, project inventory requirements, manage our supply chain and otherwise adequately service our customers or disrupt our customers’ ability use our products for treatments. In the event we experience significant disruptions, we may be unable to repair our systems in an efficient and timely manner. Accordingly, such events may disrupt or reduce the efficiency of our entire operation and have a material adverse effect on our business, financial condition, and results of operations. Currently, we carry business interruption coverage to mitigate certain potential losses, but this insurance is limited in amount, subject to deductibles, and we cannot be certain that such potential losses will not exceed our policy limits. We are increasingly dependent on complex information technology to manage our infrastructure. Our information systems require an ongoing commitment of significant resources to maintain, protect and enhance our existing systems. Failure to maintain or protect our information systems and data integrity effectively could have a material adverse effect on our business, financial condition, and results of operations.

Litigation and other legal proceedings may adversely affect our business.

From time to time we are involved in and may become involved in legal proceedings relating to patent and other intellectual property matters, product liability claims, employee claims, tort or contract claims, federal regulatory investigations, securities class action, and other legal proceedings or investigations, which could have an adverse impact on our reputation, business and financial condition and divert the attention of our management from the operation of our business. For example, we have previously been a party to securities class action and shareholder derivative litigation and other litigation as set forth in Legal Proceedings. Litigation is inherently unpredictable and can result in excessive or unanticipated verdicts and/or injunctive relief that affect how we operate our business. We could incur judgments or enter into settlements of claims for monetary damages or for agreements to change the way we operate our business, or both. There may be an increase in the scope of these matters or there may be additional lawsuits, claims, proceedings or investigations in the future, which could have a material adverse effect on our business, financial condition, and results of operations. Adverse publicity about regulatory or legal action against us could damage our reputation and brand image, undermine our customers’ confidence and reduce long-term demand for our products, even if the regulatory or legal action is unfounded or not material to our operations.

We must indemnify or advance reasonable legal expenses for officers and directors, including, in certain circumstances, former employees and directors, in their defense against legal proceedings, unless certain conditions apply. A prolonged uninsured expense and indemnification obligation could have a material adverse effect on our business, financial condition, and results of operations.

If we make acquisitions or divestitures, we could encounter difficulties that harm our business.

We may acquire companies, products or technologies that we believe to be complementary to the present or future direction of our business, or may be of a strategic nature with a focus on a new direction focused on the combined company and the business that we may acquire. If we engage in such acquisitions, we may have difficulty integrating the acquired personnel, financials, operations, products or technologies. Acquisitions may dilute our earnings per share, disrupt our ongoing business, distract our management and employees, increase our expenses, subject us to liabilities, and increase our risk of litigation, all of which could harm our business. If we use cash to acquire companies, products or technologies, it may divert resources otherwise available for other purposes. If we use our common stock to acquire companies, products or technologies, our stockholders may experience substantial dilution.

Failure to attract and retain sufficient qualified personnel could also impede our growth.

Our current Chief Financial Officer, Brian Conn, is currently only working for us on a part-time interim basis. As a result, we will need to hire a new, full-time Chief Financial Officer soon.  In addition, as has been previously disclosed, Will McGuire, our Chief Executive Officer, has been diagnosed with a serious illness not caused by COVID-19 and has been undergoing treatment for his illness. Discussions are ongoing with Mr. McGuire, but we anticipate that we may also need to seek a replacement Chief Executive Officer in the near future. We do not maintain “key man” insurance policies on the lives of these individuals or the lives of any of our other employees,

26

including our Executive Chairman, David A. Jenkins. Our success also depends on our ability to continue to attract, retain and motivate highly skilled junior, mid-level and senior managers as well as junior, mid-level and senior scientific and medical personnel. If we are not successful in attracting and retaining highly qualified personnel, it would have a material adverse effect on our business, financial condition, and results of operations.  We face intense competition for executive-level talent from a variety of sources, including from current and potential competitors in the medical device and healthcare industries, and there is no guarantee that we can locate suitable replacements when they are needed.

Failure to maintain effective internal controls could cause our investors to lose confidence in us and adversely affect the market price of our common stock. If our internal controls are not effective, we may not be able to accurately report our financial results or prevent fraud.

We are required, pursuant to Section 404 of the Sarbanes-Oxley Act, to furnish a report by management on, among other things, the effectiveness of our internal control over financial reporting. As an “emerging growth company,” we will avail ourselves of the exemption from the requirement that our independent registered public accounting firm attest to the effectiveness of our internal control over financial reporting under Section 404. However, we may no longer avail ourselves of this exemption when we cease to be an “emerging growth company” unless at that time we are still a “smaller reporting company.” When our independent registered public accounting firm is required to undertake an assessment of our internal control over financial reporting, the cost of our compliance with Section 404 will correspondingly increase. Our compliance with applicable provisions of Section 404 will require that we incur substantial accounting expense and expend significant management time on compliance-related issues as we implement additional corporate governance practices and comply with reporting requirements. Moreover, if we are not able to comply with the requirements of Section 404 applicable to us in a timely manner, or if we or our independent registered public accounting firm identifies deficiencies in our internal control over financial reporting that are deemed to be material weaknesses, the market price of our stock could decline and we could be subject to sanctions or investigations by the SEC or other regulatory authorities, which would require additional financial and management resources.

As previously disclosed, in 2019, we identified material weaknesses in our internal control over financial reporting. A material weakness is a significant deficiency, or a combination of significant deficiencies, in internal control over financial reporting such that it is reasonably possible that a material misstatement of the annual or interim financial statements will not be prevented or detected on a timely basis. The material weaknesses that we identified related to the aggregation of control deficiencies in our control environment, in particular an inappropriate “tone at the top” set by certain members of senior management, a failure to promote adherence to our Code of Ethics and Conduct, and the lack of sufficient competent resources in key roles at the organization.

The material weaknesses discussed were remediated as of December 31, 2019. We incurred significant costs to remediate those weaknesses, primarily personnel costs, external consulting and legal fees, system implementation costs, and related indirect costs including the use of facilities and technology. However, completion of remediation does not provide assurance that our controls will operate properly or that our financial statements will be free from error, which may undermine our ability to provide accurate, timely and reliable reports on our financial and operating results. There may be additional undetected material weaknesses in our internal control over financial reporting, as a result of which we may not detect financial statement errors on a timely basis. Further, to the extent we identify additional material weaknesses, we will not be able to fully assess whether corrective measures will remediate the material weakness in our internal control over financial reporting until we have completed our implementation efforts and sufficient time passes in order to evaluate their effectiveness. In addition, if we identify additional errors that result in material weaknesses in our internal control over financial reporting, we may not detect errors on a timely basis and our financial statements may be materially misstated. Moreover, we have acquired Catheter, and in the future we may engage in additional business transactions, such as acquisitions, reorganizations or implementation of new information systems, any of which could negatively affect our internal control over financial reporting and result in material weaknesses.

If we identify additional material weaknesses in our internal control over financial reporting, if we are unable to comply with the requirements of Section 404 in a timely manner, if we are unable to assert that our internal control over financial reporting is effective, or if our independent registered public accounting firm is unable to express an opinion as to the effectiveness of our internal control over financial reporting, we may be late with the filing of our periodic reports, investors may lose confidence in the accuracy and completeness of our financial

27

reports, and the market price of our common stock could be negatively affected. We face additional challenges to maintain adequate internal controls as we integrate our operations and businesses following our merger with Catheter.  As a result of any internal control failures, we could also become subject to investigations by the stock exchange on which our securities are listed, the SEC, or other regulatory authorities, and become subject to litigation from investors and stockholders, which could harm our reputation or divert financial and management resources from our core business, and which would have a material adverse effect on our business, financial condition and results of operations.

Our revenues may depend on our customers’ receipt of adequate reimbursement from private insurers and government sponsored healthcare programs.

Political, economic, and regulatory influences continue to change the healthcare industry in the United States. The ability of hospitals to pay fees for our products will partially depend on the extent to which reimbursement for the costs of such materials and related treatments will continue to be available from private health coverage insurers and other similar organizations. We may have difficulty gaining market acceptance for the products we sell if third-party payers do not provide adequate coverage and reimbursement to hospitals.

Major third-party payers of hospitals, such as private healthcare insurers, periodically revise their payment methodologies based, in part, upon changes in government sponsored healthcare programs. We cannot predict these periodic revisions with certainty, and such revisions may result in stricter standards for reimbursement of hospital charges for certain specified products, potentially adversely impacting our business, results of operations, and financial conditions when we start receiving reimbursement from third party payers.

The sales of our products and services will depend in part on the availability of reimbursement by third-party payers, such as government health administration authorities, private health insurers and other organizations. Third-party payers often challenge the price and cost-effectiveness of medical treatments and services. Governmental approval of health care products does not guarantee that these third-party payers will pay for the products. Even if third-party payers do accept our products and services, the amounts they pay may not be adequate to enable us to realize a profit. Legislation and regulations affecting the pricing of therapies may change before our products and services are approved for marketing, and any such changes could further limit reimbursement, if any.

We may be unable to compete successfully with companies in our highly competitive industry, many of whom have substantially greater resources than we do.

The healthcare industry is highly competitive. There are numerous approved products for treating the indications for which we have received clearance or approval and those that we may pursue in the future. Many of these cleared or approved products are well-established and are widely accepted by physicians, patients and third-party payors. Insurers and other third-party payors may encourage the use of competitors’ products. In addition, many companies are developing products, and we cannot predict what the standard of care will be in the future.

Our primary competitors in the cardiac electrophysiology, or EP, space include known medical devices such as pacemakers, electrocardiogram, or ECG, systems and cardiac catheters, but also laboratory equipment such as intracardiac mapping systems and fluoroscopy systems (similar to x-ray in real time). The EP market includes large medical device companies such as Medtronic, Plc., Abbott Laboratories, Biosense-Webster (J&J) and Boston Scientific Corp.

Many of our competitors have substantially greater financial, manufacturing, commercial, and technical resources than we do. There has been consolidation in the industry, and we expect that to continue. Larger competitors may have substantially larger sales and marketing operations than we do. This may allow those competitors to spend more time with current and potential customers and to focus on a larger number of current and potential customers, which gives them a significant advantage over our sales and marketing team and our international distributors in making sales. In addition, we are often selling to customers who already utilize our competitors’ products and who have established relationships with our competitors’ sales representatives and familiarity with our competitors’ products.

Larger competitors may also have broader product lines, which enables them to offer customers bundled purchase contracts and quantity discounts. These competitors may have more experience than we have in research

28

and development, marketing, manufacturing, preclinical testing, conducting clinical trials, obtaining FDA and non-U.S. regulatory clearances or approvals and marketing cleared or approved products. Our competitors may discover technologies and techniques, or enter into partnerships and collaborations, to develop competing products that are more effective or less costly than our products or the products we may develop. This may render our technology or products obsolete or noncompetitive. Our competitors may also be better equipped than we are to respond to competitive pressures. If we are unable to compete successfully in our industry, it would have a material adverse effect on our business, financial condition, and results of operations.

Our future operating results depend upon our ability to obtain components in sufficient quantities on commercially reasonable terms or according to schedules, prices, quality and volumes that are acceptable to us, and suppliers may fail to deliver components, or we may be unable to manage these components effectively or obtain these components on such terms.

Because we have historically obtained certain components globally, some of which are uniquely customized, from limited sources, we are subject to significant supply and pricing risks and exposed to multiple potential sources of component shortages. Many components, including those that are available from multiple sources, are at times subject to industry-wide shortages and significant commodity pricing fluctuations that could materially adversely affect our financial condition and operating results. We may source alternative parts to mitigate the challenges caused by these shortages, but there is no guarantee we may be able to continually do so as we scale production to meet our growth targets. The unavailability of any component or supplier could result in production delays, idle manufacturing facilities, product design changes and loss of access to important technology and tools for producing and supporting our products, as well as impact our capacity production. Our suppliers may not be willing or able to sustainably meet our timelines or our cost, quality and volume needs, or to do so may cost us more, which may require us to replace them with other sources. If our supply of components for a new or existing product continues to be delayed or constrained for any reason, including if an outsourcing partner delayed shipments of completed products to us or additional time is required to obtain sufficient quantities from the original source, or if we have to identify and obtain sufficient quantities from an alternative source, then our financial condition and operating results could be materially adversely affected. In addition, the continued availability of these components at acceptable prices, or at all, can be affected for any number of reasons, including if suppliers decide to concentrate on the production of common components or components for other customers instead of components customized to meet our requirements. While we have entered into agreements for the supply of many components, there can be no assurance that we will be able to extend or renew these agreements on similar terms, or at all. Component suppliers may suffer from poor financial conditions, which can lead to business failure for the supplier or consolidation within a particular industry, further limiting our ability to obtain sufficient quantities of components on commercially reasonable terms. While we believe that we will be able to secure additional or alternate sources or develop our own replacements for most of our components, there is no assurance that we will be able to do so quickly or at all.

Additionally, we may be unsuccessful in our continuous efforts to negotiate with existing suppliers to obtain cost reductions and avoid unfavorable changes to terms, source less expensive suppliers for certain parts and redesign certain parts to make them less expensive to produce. Any of these occurrences may harm our business, prospects, financial condition and operating results.

If hospitals, physicians and patients do not accept our current and future products or if the market for indications for which any product candidate is approved is smaller than expected, we may be unable to generate significant revenue, if any.

Even when any of our product candidates obtain regulatory approval, they may not gain market acceptance among hospitals, physicians, patients, and third-party payers. Physicians may decide not to recommend our treatments for a variety of reasons including:

29

If any of our product candidates are approved but fail to achieve market acceptance or such market is smaller than anticipated, we may not be able to generate significant revenue and our business would suffer.

The recent coronavirus, or COVID-19, outbreak adversely affected our financial condition and results of operations and we cannot provide any certainty as to whether there will be future impacts from COVID-19 or another pandemic.

The COVID-19 outbreak adversely affected our financial condition and results of operations. The impact of the outbreak of COVID-19 on the businesses and the economy in the United States and the rest of the world was significant. The extent to which the COVID-19 outbreak will continue to impact business and the economy is highly uncertain and cannot be predicted, and there can be no guarantee that a future pandemic will not have similar or worse impacts. Accordingly, we cannot predict the extent to which our financial condition and results of operation will be affected.

In addition, we are uncertain of the full effect the pandemic will have on us for the longer term since the scope and duration of the pandemic is unknown, and evolving factors such as the level and timing of the distribution of efficacious vaccines across the world and the extent of any resurgences of the virus or emergence of new variants of the virus, such as the Delta variant and the Omicron variant, will impact the stability of economic recovery and growth. We may experience long-term disruptions to our operations resulting from changes in government policy or guidance; quarantines of employees, customers and suppliers in areas affected by the pandemic; and closures of businesses or manufacturing facilities critical to its business.

A variety of risks associated with marketing our products internationally could materially adversely affect our business.

In addition to selling our products in the U.S., we sell products outside of the U.S. We are subject to additional risks related to operating in foreign countries, including:

30

These and other risks associated with international operations may materially adversely affect our ability to attain or maintain profitable operations, which would have a material adverse effect on our business, financial condition, and results of operations.

The impact of the military action in Ukraine, and the actions that have been and could be taken by other countries, including new and stricter sanctions and actions taken in response to such sanctions, have affected, and may continue to affect, our business and results of operations, including our supply chain.

On February 24, 2022, Russian forces launched significant military action against Ukraine, and sustained conflict and disruption in the region is possible. The impact to Ukraine, as well as actions taken by other countries, including new and stricter sanctions imposed by Canada, the United Kingdom, the European Union, the U.S. and other countries and companies and organizations against officials, individuals, regions and industries in Russia and Ukraine, and actions taken by Russia in response to such sanctions, and each country’s potential response to such sanctions, tensions and military actions could have a material adverse effect on our operations. Any such material adverse effect from the conflict and enhanced sanctions activity may disrupt our supply chains and affect the delivery of our products and services or impair our ability to complete financial or banking transactions.

We also cannot predict the impact of any heightened geopolitical instability or the results that may follow, including reductions in consumer confidence, heightened inflation, cyber disruptions or attacks, higher natural gas costs, higher manufacturing costs and higher supply chain costs. The impact of Russia’s invasion of Ukraine could cause our results to differ materially from the outlook presented in this Annual Report.

If the third parties on which we rely for the conduct of our clinical trials and results do not perform our clinical trial activities in accordance with good clinical practices and related regulatory requirements, we may be unable to obtain regulatory approval for or commercialize our product candidates.

We may use independent clinical investigators and other third-party service providers to conduct and/or oversee the clinical trials of our product candidates.

FDA requires us and our clinical investigators to comply with regulations and standards, commonly referred to as good clinical practices, for conducting, recording, and reporting the results of clinical trials to assure that data and reported results are credible and accurate, and that the trial participants are adequately protected. Our reliance on third parties that we do not control does not relieve us of these responsibilities and requirements. Third parties may not complete activities on schedule or may not conduct our clinical trials in accordance with regulatory requirements or the respective trial plans and protocols. The failure of these third parties to carry out their obligations could delay or prevent the development, approval, and commercialization of our product candidates or result in enforcement actions against us.

We may be adversely affected by product liability claims, unfavorable court decisions or legal settlements.

We are exposed to potential product liability risks inherent in the design, manufacturing, and marketing of our products. These matters are subject to many uncertainties, and outcomes are not predictable. In addition, we may incur significant legal expenses regardless of whether we are found to be liable.

While we maintain product liability insurance, there can be no assurance that such coverage is sufficient to cover all product liabilities that we may incur. We are not currently subject to any product liability proceedings, and we have no reserves for product liability disbursements. However, we may incur material liabilities relating to

31

product liability claims in the future, including product liability claims arising out of the usage and delivery of our products. Should we incur product-related liabilities exceeding our insurance coverage, we would be required to use available cash or raise additional cash to cover such liabilities.

Our ability to use our net operating loss carryforwards may be limited.

As of December 31, 2022, we had net operating loss carryforwards, or NOLs, of approximately $54.5 million for federal income tax purposes and $47.8 million for state income tax purposes. Utilization of these NOLs depends on many factors, including our future income, which cannot be assured. These NOLs could expire unused and be unavailable to offset our future income tax liabilities. In addition, under Section 382 of the Internal Revenue Code of 1986, as amended, or IRC, and corresponding provisions of state law, if a corporation undergoes an “ownership change,” which is generally defined as a greater than 50% change, by value, in its equity ownership by 5% stockholders over a three-year period, the corporation’s ability to use its pre-change NOLs and other pre-change tax attributes to offset its post-change income may be limited. We completed an IRC Section 382 analysis regarding the limitation of net operating losses through December 31, 2020 and determined that ownership changes occurred in May 2020. Management believes further ownership changes occurred during each of the years ended December 31, 2022 and 2021. Accordingly, utilization of our NOLs is subject to an annual limitation for federal tax purposes under IRC Section 382. Due to the changes in control, we estimated that all of our $54.5 million federal NOLs are effectively eliminated, according to IRC Section 382. In addition, $40.8 million of our $47.8 million in state NOLs were also eliminated. As a result of these eliminations, our federal and state NOLs were reduced to zero and $6.9 million, respectively, before taking into consideration the valuation allowance.

Risks Related to Government Regulation and our Industry

Our medical device operations are subject to pervasive and continuing FDA regulatory requirements.

Medical devices regulated by the FDA are subject to “general controls” which include:

We have entered into a Settlement Agreement with the Department of Justice, or DOJ, and agreements with the participating states, resolving a DOJ civil investigation concerning certain Covered Conduct (as defined in the Settlement Agreement), and the Office of Inspector General, or OIG, has agreed, conditioned upon our full payment of amounts owed in the Settlement Agreement, and in consideration of our obligations under a Corporate Integrity Agreement, to release our permissive exclusion rights and refrain from instituting any administrative action seeking to exclude us from participating in Medicare, Medicaid, or other federal health care programs as a result of the Covered Conduct. The Corporate Integrity Agreement has a five-year term and imposes monitoring, reporting, certification, documentation, oversight, screening, and training obligations on us, including the hiring of a compliance officer and independent review organization; however, the OIG has agreed that we are not subject to the terms of the Corporate Integrity Agreement for so long as we do not carry on the legacy Ra Medical business or use the related business assets post our merger with Catheter.

Some devices known as “510(k)-exempt” devices can be marketed without prior marketing clearance or approval from the FDA. In addition to the “general controls,” Class II medical devices are also subject to “special controls,” including, in many cases, adherence to a particular guidance document and compliance with the performance standard. As a Class II, 510(k)-cleared device, our VIVO product is subject to both general and special controls. Instead of obtaining 510(k) clearance, most Class III devices are subject to premarket approval, or PMA.

32

We do not believe any of our current products are Class III devices, but future products could be, which would subject them to the PMA process.

Many medical devices are also regulated by the FDA as “electronic products.” In general, manufacturers and marketers of “electronic products” are subject to certain FDA regulatory requirements intended to ensure the radiological safety of the products. These requirements include, but are not limited to, filing certain reports with the FDA about the products and defects/safety issues related to the products as well as complying with radiological performance standards.

In addition, we may be required to conduct costly post-market testing and surveillance to monitor the safety or effectiveness of our products, and we must comply with medical device reporting, or MDR, requirements, including the reporting of adverse events and malfunctions related to our products. We are required to file MDRs if our products may have caused or contributed to a serious injury or death or malfunctioned in a way that could likely cause or contribute to a serious injury or death if it were to recur. Any such MDR that reports a significant adverse event could result in negative publicity, which could harm our reputation and future sales. Later discovery of previously unknown problems with our products, including unanticipated adverse events or adverse events of unanticipated severity or frequency, manufacturing problems, or failure to comply with regulatory requirements may result in changes to labeling, restrictions on such products or manufacturing processes, withdrawal of the products from the market, voluntary or mandatory recalls, a requirement to repair, replace or refund the cost of any medical device we manufacture or distribute, fines, suspension of regulatory clearances or approvals, product seizures, injunctions or the imposition of civil or criminal penalties which may have a material adverse effect on our business, financial condition, and results of operations.

The medical device industry is now experiencing greater scrutiny and regulation by federal, state and foreign governmental authorities. Companies in our industry are subject to more frequent and more intensive reviews and investigations, often involving the marketing, business practices, and product quality management. For example, as discussed above, on December 28, 2020, we entered into a Settlement Agreement with the DOJ to resolve a civil False Claims Act investigation and related civil action, and in connection with the Settlement Agreement, we also have reached agreements that resolve previously disclosed related investigations conducted by certain state attorneys general. Under the Settlement Agreement, and the agreements with the participating states, we were required to make an initial payment of $2.5 million, of which we paid $2.4 million in December 2020 and $0.1 million in April 2021. We also were required to make a payment of $5.0 million as a result of the January 2023 merger with Catheter in January 2023, which we made in February 2023. We may be required to make additional payments in the future upon the achievement of revenue targets.

Additionally, federal, state and foreign governments and entities have enacted laws and issued regulations and other standards requiring increased visibility and transparency of our interactions with healthcare providers. For example, the U.S. Physician Payment Sunshine Act, now known as Open Payments, requires us to report to the Centers for Medicare & Medicaid Services, or CMS, payments and other transfers of value to all U.S. physicians and U.S. teaching hospitals, with the reported information made publicly available on a searchable website. On December 28, 2020, we entered into the Settlement Agreement with the DOJ relating to claims under the civil False Claims Act investigation concerning, among other things, whether we marketed and promoted DABRA devices, which we are no longer marketing, for unapproved uses that were not covered by federal healthcare programs, and whether we paid improper remuneration to physicians and other healthcare providers in violation of the Anti-Kickback Statute. Effective January 2022, we are also required to collect and report information on payments or transfers of value to physician assistants, nurse practitioners, clinical nurse specialists, certified registered nurse anesthetists, and certified nurse-midwives. Failure to comply with these legal and regulatory requirements could impact our business, and we have had and will continue to spend substantial time and financial resources to develop and implement enhanced structures, policies, systems and processes to comply with these legal and regulatory requirements, which may also impact our business and which could have a material adverse effect on our business, financial condition, and results of operations for years after any resolution of these investigations and any resulting claims are resolved.

We may have to make milestone payments under the Settlement Agreement we entered into with the DOJ.

Pursuant to our Settlement Agreement with the DOJ, if during fiscal 2023 or 2024 our revenues exceed $10 million, we have agreed to pay the United States and certain Medicaid participating states, $1.0 million for 2023,

33

and $1.25 million for 2024, for each corresponding fiscal year where our revenue exceeds $10 million. Payment must be made within 90 days after the end of the fiscal year.

Product clearances and approvals can often be denied or significantly delayed.

Under FDA regulations, unless exempt, a new medical device may only be commercially distributed after it has received 510(k) clearance, is authorized through the de novo classification process, or is the subject of an approved PMA. The FDA will clear marketing of a medical device through the 510(k) process if it is demonstrated that the new product is substantially equivalent to another legally marketed product not subject to a PMA. Sometimes, a 510(k) clearance must be supported by preclinical and clinical data. Our ability to enroll patients in clinical trials could be impacted by a resurgence of the COVID-19 outbreak or another pandemic, as many patients would be likely to elect or would likely be asked to delay procedures at such a time.

The PMA process typically is more costly, lengthy and stringent than the 510(k) process. Unlike a 510(k) review which determines “substantial equivalence,” a PMA requires that the applicant demonstrate reasonable assurance that the device is safe and effective by producing valid scientific evidence, including data from preclinical studies and human clinical trials. Therefore, to obtain regulatory clearance or approvals, we typically must, among other requirements, provide the FDA and similar foreign regulatory authorities with preclinical and clinical data that demonstrate to their satisfaction that our products satisfy the criteria for approval. Preclinical testing and clinical trials must comply with the regulations of the FDA and other government authorities in the U.S. and similar agencies in other countries.

We may be required to obtain PMAs, PMA supplements or additional 510(k) premarket clearances to market modifications to our existing products. The FDA requires device manufacturers to make and document a determination of whether a device modification requires approval or clearance; however, the FDA can review a manufacturer’s decision. The FDA may not agree with our decisions not to seek approvals or clearances for particular device modifications. If the FDA requires us to obtain PMAs, PMA supplements or premarket clearances for any modification to a previously cleared or approved device, we may be required to cease manufacturing and marketing the modified device and perhaps also to recall such modified device until we obtain FDA clearance or approval. We may also be subject to significant regulatory fines or penalties.

The FDA may not approve future PMA applications or supplements or clear our 510(k) applications on a timely basis or at all. For example, the COVID-19 outbreak could affect the FDA’s ability to review applications or supplements. Such delays or refusals could have a material adverse effect on our business, financial condition, and results of operations.

The FDA may also change its clearance and approval policies, adopt additional regulations or revise existing regulations, or take other actions which may prevent or delay approval or clearance of our products under development or impact our ability to modify our currently approved or cleared products on a timely basis. Any of these actions could have a material adverse effect on our business, financial condition, and results of operations.

International regulatory approval processes may take more or less time than the FDA clearance or approval process. If we fail to comply with applicable FDA and comparable non-U.S. regulatory requirements, we may not receive regulatory clearances or approvals or may be subject to FDA or comparable non-U.S. enforcement actions. We may be unable to obtain future regulatory clearance or approval in a timely manner, or at all, especially if existing regulations are changed or new regulations are adopted. For example, the FDA clearance or approval process can take longer than anticipated due to requests for additional clinical data and changes in regulatory requirements. A failure or delay in obtaining necessary regulatory clearances or approvals would materially adversely affect our business, financial condition, and results of operations.

Although we have obtained regulatory clearance for our VIVO product in the U.S. and certain non-U.S. jurisdictions, it will remain subject to extensive regulatory scrutiny.

Although our VIVO product has received regulatory clearance in the U.S. and certain non-U.S. jurisdictions, it will be subject to ongoing regulatory requirements for manufacturing, labeling, packaging, storage, advertising, promotion, sampling, record-keeping, conduct of post-marketing studies, and submission of safety, effectiveness,

34

and other post-market information, including both federal and state requirements in the U.S. and requirements of comparable non-U.S. regulatory authorities.

Any regulatory clearances or approvals that we have received for our products will be subject to limitations on the cleared or approved indicated uses for which the product may be marketed and promoted or to the conditions of approval or contain requirements for potentially costly post-marketing testing. We are required to report certain adverse events and production problems, if any, to the FDA and comparable foreign regulatory authorities. Any new legislation addressing product safety issues could result in increased costs to assure compliance. The FDA and other agencies, including the DOJ, closely regulate and monitor the post-clearance or approval marketing and promotion of products to ensure that they are marketed and distributed only for the cleared or approved indications and in accordance with the provisions of the cleared or approved labeling.

Promotional communications with respect to devices are subject to a variety of legal and regulatory restrictions and must be consistent with the information in the product’s cleared or approved labeling. As such, we may not promote our products for indications or uses for which they do not have clearance or approval. However, physicians can use their independent and professional judgment and use our products for off-label purposes, as FDA regulations do not restrict a physician’s choice of treatment with the practice of medicine. Prior to making certain changes to a cleared product, including certain changes to product labeling, the holder of a cleared 510(k) application may be required to submit a new premarket application and obtain clearance or approval.

If a regulatory agency discovers previously unknown problems with our products, such as adverse events of unanticipated severity or frequency, or problems with our facility where the product is manufactured, or disagrees with the promotion, marketing or labeling of our products, such regulatory agency or enforcement authority may impose restrictions on that product or us, including requiring withdrawal of the product from the market. In addition to this type of penalty for failing to comply with applicable regulatory requirements, a regulatory agency or enforcement authority may, among other things:

In addition, violations of the Federal Food, Drug, and Cosmetic Act, or FDCA, relating to the promotion of approved products may lead to investigations alleging violations of federal and state healthcare fraud and abuse and other laws, as well as state consumer protection laws. As disclosed previously, we settled a DOJ civil False Claims Act investigation concerning, among other things, whether we marketed and promoted our DABRA devices for unapproved uses that were not covered by federal healthcare programs.  We are no longer marketing DABRA devices.

Any government adverse finding, regulatory sanction or investigation of alleged violations of law could require us to expend significant time and resources in response and could generate negative publicity. Any failure to comply with ongoing regulatory requirements may significantly and adversely affect our ability to commercialize and generate revenue from our products. If regulatory sanctions are applied or if regulatory clearance or approval is withdrawn, it would have a material adverse effect on our business, financial condition, and results of operations.

35

Our products may be subject to additional recalls, revocations or suspensions after receiving FDA or foreign approval or clearance, which could divert managerial and financial resources, harm our reputation, and adversely affect our business.

The FDA and similar foreign governmental authorities have the authority to order the recall of our products because of any failure to comply with applicable laws and regulations, or defects in design or manufacture. A government mandated or voluntary product recall by us could occur because of, for example, component failures, device malfunctions, or other adverse events, such as serious injuries or deaths, or quality-related issues such as manufacturing errors or design or labeling defects.

For example, we conducted four recent recalls related to our previously marketed DABRA product.  We no longer market DABRA, but any government-mandated recall or additional voluntary recall by us of VIVO or another product we market in the future could occur as a result of component failures, manufacturing errors, design or labeling defects or other issues. These voluntary recalls and any future recalls of our products could divert managerial and financial resources, harm our reputation and adversely affect our business.

In addition, the FDA conducted an unannounced facility inspection in December 2019. The FDA issued to us a Form 483 that included observations, related to our previously marketed DABRA product, that schedules for the adjustment, cleaning, and other maintenance of equipment have not been adequately established, a device master record index was not current, and document control procedures have not been fully established. We responded to the FDA with the corrective measures we are taking and to address the issued identified in the Form 483 and based on this information, the FDA issued to us an Establishment Inspection Report, or EIR, closing out the inspection. All actions are complete, and the final Form 483 report was sent to the FDA on September 25, 2020.  We are no longer operating this facility, but the FDA could conduct inspections of our current facilities.

Depending on the corrective action we take to address a product’s deficiencies or defects, the FDA may require, or we may voluntarily decide, that we will need to seek and obtain new approvals or clearances for the device before we may market or distribute the corrected device. Seeking such approvals or clearances may delay our ability to replace the recalled devices in a timely manner. Moreover, if we do not adequately address problems associated with our devices, we may face additional regulatory enforcement action, including adverse inspection findings, FDA warning letters, product seizure, injunctions, administrative penalties, or civil or criminal fines. We may also be required to bear other costs or take other actions that may have a negative impact on our sales as well as face significant adverse publicity or regulatory consequences, which could harm our business, including our ability to market our products in the future.

In addition, we are subject to medical device reporting regulations that require us to report to the FDA or similar foreign governmental authorities if one of our products may have caused or contributed to a death or serious injury or if we become aware that it has malfunctioned in a way that would be likely to cause or contribute to a death or serious injury if the malfunction recurred. After a May 2018 inspection, the FDA issued to us a Form 483 that included observations for failure to properly evaluate whether certain complaints related to our previously marketed DABRA product that we received rose to a level required to be reported to the FDA. At that time, in response, we informed the FDA that we had modified our complaint review procedures and we completed a retrospective evaluation and have not found any complaints which require a submission to the FDA. We have not requested, and the FDA has not issued, an EIR related to this inspection.  We no longer market DABRA.

The failure by us to properly identify reportable events or to file timely reports with the FDA can subject us to sanctions and penalties, including warning letters and recalls. Physicians, hospitals and other healthcare providers may make similar reports to regulatory authorities. Any such reports may trigger an investigation by the FDA or similar foreign regulatory bodies, which could divert managerial and financial resources, harm our reputation and have a material adverse effect on our business, financial condition, and results of operations.

If we or our suppliers fail to comply with the FDA’s Quality System Regulation, or QSR, or any applicable state equivalent, our operations could be interrupted, and our potential product sales and operating results could suffer.

We and our suppliers are required to comply with the FDA’s QSR, which delineates, among other things, the design controls, document controls, purchasing controls, identification and traceability, production and process

36

controls, acceptance activities, nonconforming product requirements, corrective and preventive action requirements, labeling and packaging controls, handling, storage, distribution and installation requirements, complaint handling, records requirements, servicing requirements, and statistical techniques potentially applicable to the production of our medical devices. We and our suppliers are also subject to the regulations of foreign jurisdictions regarding the manufacturing process if we market products overseas. The FDA enforces the QSR through periodic and announced or unannounced inspections of manufacturing facilities. We anticipate that we and certain of our third-party component suppliers will be subject to future inspections. If our facility or manufacturing processes or our suppliers’ facilities or manufacturing processes are found to be in non-compliance or fail to take satisfactory corrective action in response to adverse QSR inspectional findings, the FDA could take legal or regulatory enforcement actions against us and/or our products, including but not limited to the cessation of sales or the initiation of a recall of distributed products, which could impair our ability to produce our products in a cost-effective and timely manner in order to meet our customers’ demands. We may also be required to bear other costs or take other actions that may have a negative impact on our future sales and our ability to generate profits.

Current regulations depend heavily on administrative interpretation. If the FDA does not believe that we are in compliance with applicable FDA regulations, the agency could take legal or regulatory enforcement actions against us and/or our products. We are also subject to periodic inspections by the FDA, other governmental regulatory agencies, as well as certain third-party regulatory groups. Future interpretations made by the FDA or other regulatory bodies made during the course of these inspections may vary from current interpretations and may adversely affect our business and prospects. The FDA’s and other comparable non-U.S. regulatory agencies’ statutes, regulations, or policies may change, and additional government regulation or statutes may be enacted, which could increase post-approval regulatory requirements, or delay, suspend, prevent marketing of any cleared or approved products or necessitate the recall of distributed products. We cannot predict the likelihood, nature or extent of adverse governmental regulation that might arise from future legislative or administrative action, either in the U.S. or abroad.

The medical device industry has been under heightened FDA scrutiny as the subject of government investigations and enforcement actions. If our operations and activities are found to be in violation of any FDA laws or any other governmental regulations that apply to us, we may be subject to penalties, including civil and criminal penalties, damages, fines and other legal and/or agency enforcement actions. Any penalties, damages, fines, or curtailment or restructuring of our operations or activities could adversely affect our ability to operate our business and our financial results. The risk of us being found in violation of FDA laws is increased by the fact that many of these laws are broad and their provisions are open to a variety of interpretations. Any action against us for violation of these laws, even if we successfully defend ourselves against that action and its underlying allegations, could cause us to incur significant legal expenses and divert management’s attention from the operation of our business. Where there is a dispute with a federal or state governmental agency that cannot be resolved to the mutual satisfaction of all relevant parties, we may determine that the costs, both real and contingent, are not justified by the commercial returns to us from maintaining the dispute or the product.

Various claims, design features or performance characteristics of our medical devices, that we regarded as permitted by the FDA without new marketing clearance or approval, may be challenged by the FDA or state or foreign regulators. The FDA or state or foreign regulatory authorities may find that certain claims, design features or performance characteristics, in order to be made or included in the products, may have to be supported by further clinical studies and marketing clearances or approvals, which could be lengthy, costly and possibly unobtainable.

If any of our products cause or contribute to a death or a serious injury, or malfunction in certain ways, we will be required to report under applicable medical device reporting regulations, which can result in voluntary corrective actions or agency enforcement actions.

Under the FDA medical device reporting regulations, or MDR regulations, medical device manufacturers are required to report to the FDA information that a device has or may have caused or contributed to a death or serious injury or has malfunctioned in a way that would likely cause or contribute to death or serious injury if the malfunction of the device or one of our similar devices were to recur.

If we fail to report events required to be reported to the FDA within the required timeframes, or at all, the FDA could take enforcement action against us. Any such adverse event involving our products also could result in future voluntary corrective actions, such as recalls or customer notifications, or agency action, such as inspection or

37

enforcement action. Any corrective action, whether voluntary or involuntary, as well as defending ourselves in a lawsuit, will require our time and capital, distract management from operating our business, and may harm our reputation and have a material adverse effect on our business, financial condition, and results of operations.

Healthcare reform initiatives and other administrative and legislative proposals may adversely affect our business, financial condition, results of operations and cash flows in our key markets.

There have been and continue to be proposals by the federal government, state governments, regulators and third-party payors to control or manage the increasing costs of healthcare and, more generally, to reform the U.S. healthcare system.

Certain of these proposals could limit the prices we are able to charge for our products or the coverage and reimbursement available for our products and could limit the acceptance and availability of our products on the market. The adoption of proposals to control costs could have a material adverse effect on our business, financial condition, and results of operations.

For example, in the U.S., in March 2010, the Patient Protection and Affordable Care Act, or PPACA, was passed. The PPACA was intended to make significant changes to the way healthcare is financed by both federal and state governments and private insurers, with direct impacts to the medical device industry. Among other provisions, the PPACA imposed, with limited exceptions, a deductible excise tax of 2.3% on sales of medical devices by entities that manufacture or import certain medical devices offered for sale in the U.S. The Consolidated Appropriations Act, 2016 (Pub. L. 114-113), signed into law in December 2015, included a two-year moratorium on the medical device excise tax. A second two-year moratorium on the medical device excise tax was signed into law in January 2018 as part of the Extension of Continuing Appropriations Act, 2018 (Pub. L. 115-120), extending the moratorium through December 31, 2019. On December 20, 2019, President Trump signed into law a permanent repeal of the medical device tax under the PPACA, but there is no guarantee that Congress or the President will not reverse course in the future. If such an excise tax on sales of any of our products in the U.S. is enacted, it could have a material adverse effect on our business, financial condition, and results of operations.

In addition, the PPACA and the Medicare Access and CHIP Reauthorization Act of 2015 substantially changed the way healthcare is delivered and financed by both governmental and private insurers. These changes included the creation of demonstration programs and other value-based purchasing initiatives that provide financial incentives for physicians and hospitals to reduce costs. Under the Trump Administration, there were ongoing efforts to modify or repeal all or part of PPACA or take executive action that affects its implementation. Tax reform legislation was passed that includes provisions that impact healthcare insurance coverage and payment such as the elimination of the tax penalty for individuals who do not maintain health insurance coverage (the so-called “individual mandate”). Such actions or similar actions could have a negative effect on the utilization of our products.

On December 18, 2019, the U.S. Court of Appeals for the Fifth Circuit upheld a lower court’s determination in Texas v. Azar, 4:18-cv-00167, that the individual mandate was unconstitutional and remanded the case to the lower court for further analysis as to whether PPACA as a whole is unconstitutional because the individual mandate is not severable from other provisions of the law. In June 2021, the U.S. Supreme Court held that Texas and other challengers had no legal standing to challenge the PPACA, dismissing the case on procedural grounds without specifically ruling on the constitutionality of the PPACA. Thus, the PPACA will remain in effect in its current form. Further, legislative and regulatory changes under the PPACA remain possible, although the federal administration under President Biden has signaled that it plans to build on the PPACA and expand the number of people who are eligible for health insurance under it. It is unclear how future litigation and healthcare measures promulgated by the Biden administration or future administrations will impact the implementation of the PPACA and our business, financial condition and results of operations. Complying with any new legislation or reversing changes implemented under the PPACA could be time-intensive and expensive, resulting in a material adverse effect on our business.

Other healthcare reform legislative changes have also been proposed and adopted in the U.S. since the PPACA was enacted. In August 2011, the Budget Control Act of 2011, among other things, led to aggregate reductions of Medicare payments to providers of 2% per fiscal year. These reductions went into effect in April 2013, which, due to subsequent legislative amendments, will stay in effect through 2031, with the exception of a temporary suspension implemented under various COVID-19 relief legislation from May 1, 2020 through March 31, 2022, unless additional congressional action is taken. Under current legislation, the actual reduction in Medicare payments will vary from 1% in 2022 to up to 4% in the final fiscal year of the sequester. In January 2013, the

38

American Taxpayer Relief Act of 2012 was signed into law, which, among other things, further reduced Medicare payments to several types of providers, including hospitals, imaging centers and cancer treatment centers, and increased the statute of limitations period for the government to recover overpayments to providers from three to five years.

Further, recently there has been heightened governmental scrutiny over the manner in which manufacturers set prices for their marketed products, which has resulted in several U.S. Congressional inquiries and proposed, and enacted federal legislation designed to bring transparency to product pricing and reduce the cost of products and services under government healthcare programs. As a result of reform of the U.S. healthcare system, changes in reimbursement policies or healthcare cost containment initiatives may limit or restrict coverage and reimbursement for procedures using our products and cause our revenue to decline. Additionally, individual states in the U.S. have also become increasingly active in passing legislation and implementing regulations designed to control product pricing, including price or patient reimbursement constraints, discounts, restrictions on certain product access and marketing cost disclosure and transparency measures. Moreover, Medicare, regional healthcare authorities and individual hospitals are increasingly using bidding procedures to determine what products to purchase, and which suppliers will be included in their healthcare programs. Adoption of price controls and other cost-containment measures, and adoption of more restrictive policies in jurisdictions with existing controls and measures may prevent or limit our ability to generate revenue, attain profitability.

Various new healthcare reform proposals are emerging at the federal and state level. Any new federal and state healthcare initiatives that may be adopted could limit the amounts that federal and state governments will pay for healthcare products and services and could have a material adverse effect on our business, financial condition, and results of operations.

Healthcare cost containment pressures and legislative or administrative reforms resulting in restrictive coverage and reimbursement practices of third-party payors could decrease the demand for our products and the number of procedures performed using our devices, which could have an adverse effect on our business.

The ability of our customers to obtain reimbursement for procedures that are performed using our products from government and private third-party payors is critical to our success. The availability of coverage and reimbursement for procedures performed using our products affects which products customers purchase and the prices they are able to pay to us.

Reimbursement can vary based on geographical location, type of provider/customer, and third-party payor and can significantly influence the acceptance of new products and services. Third-party payors may view some procedures performed using our products as experimental and may not provide coverage. Third-party payors may not cover and reimburse our customers for certain procedures performed using our products in whole or in part in the future, or payment rates may decline and not be adequate, or both. Further, coverage and reimbursement by third-party payors to our customers is also related to billing codes to describe procedures performed using our products. Hospitals and physicians use several billing codes to bill for such procedures. Third-party payors may not continue to recognize the CPT codes available for use by our customers. The CPT codes may change undermining our customer’s ability to use those codes and reimbursement may be interrupted. Furthermore, some payors may not accept these new or revised codes for payment.

Reimbursement rates are unpredictable, and we cannot project how our business may be affected by future legislative and regulatory developments. Future legislation or regulation, or changing payment methodologies, may have a material adverse effect on our business, financial condition, and results of operations, and reimbursement may not be adequate for all customers. From time to time, typically on an annual basis, payment amounts are updated and revised by third-party payors. Because the cost of our products generally is recovered by the healthcare provider as part of the payment for performing a procedure and not separately reimbursed, these updates, especially lower payments could directly impact the demand for our products. For example, in July 2013, the Centers for Medicare and Medicaid Services, or CMS, proposed reimbursement changes that would have decreased reimbursement for procedures in an outpatient-based facility, such as a catheterization lab. Although CMS chose not to implement those changes in 2013, we cannot assure you that CMS will not take similar actions in the future.

After we develop new products or seek to market our products for new approved or cleared indications, we may find limited demand for the product unless government and private third-party payors provide adequate

39

coverage and reimbursement to our customers. Obtaining codes and reimbursement for new products may require an extended, multi-year effort. Even with reimbursement approval and coverage by government and private payors, providers submitting reimbursement claims for new products or existing products with new approved or cleared indications may face delay in payment if there is confusion by providers or payors regarding the appropriate codes to use in seeking reimbursement. Such delays may create an unfavorable impression within the marketplace regarding the level of reimbursement or coverage available for our products.