Item 1. Business.
Overview
We are engaged in the purchase, sale and
distribution of semi-finished aluminum and steel products to a diverse customer base located in the Americas, Europe, Australia
and New Zealand. We sell our products through our own marketing and sales personnel as well as through commission based independent
sales agents located in North America and Europe. We purchase products from suppliers located throughout the world. Our three
largest suppliers, PT. Alumindo Light Metal Industry Tbk (“PT. Alumindo”), Hulamin Ltd., Southeast Aluminium, furnished
approximately 53% of our products during 2016 as compared to 56% of our products during 2015. While we generally place orders
with our suppliers based upon orders that we receive from our customers, we also purchase material for our own stock, which we
typically use for shorter term deliveries to our customers.
Growth Strategy
We believe that our long-term growth will
depend upon understanding our customers’ particular requirements and delivering a high-level of service and quality products
that meet those requirements consistently. Our growth and profitability will also depend upon our ability to continue building
our market knowledge and in particular our understanding of the production capabilities of our suppliers. We will also need to
maintain, strengthen and expand our supplier relationships in light of continued pricing pressures. Finally, we will need to succeed
in identifying and executing opportunities to provide our customers additional value added offerings, in both our existing markets
and product offerings as well as in broader or new product groups and geographic areas.
Our strategy for growth consists of the
following key elements:
Provide Customers with a High Level
of Service and Cost Effective, Quality Products.
We work closely with our customers to understand their specific
requirements. This work enables us to provide each customer with cost-effective, quality materials, matching that customer’s
particular needs. We also provide various ancillary services to our customers, such as arranging for products to be stored in
warehouse facilities for release to them on a just-in-time delivery basis, providing them with timely information about market
trends and product development, arranging for subsequent metal processing or finishing services and making material available
from our own stock to meet our customers’ short term requirements. Our services are described more fully under
“Sales, Marketing and Customer Service” below.
Expand Volumes and Product Breadth
with Existing Suppliers and Customers.
We continually seek to build on our market knowledge. We try to maintain a current
understanding of our suppliers’ production capabilities and of our customers’ needs and markets. This understanding
enables us to recognize opportunities to introduce new product lines to our customers and to increase volume from our suppliers.
Strengthen and Expand Our Supplier
Relationships.
We endeavor to continue building our supply sources, both by expanding our relationships with existing suppliers
and by adding new suppliers. In cultivating supplier relationships, we emphasize our combination of market knowledge and customer
base, which we believe makes us an effective marketing and distribution channel for our suppliers. Conversely, we believe that
our supplier relationships position us to offer our customers a wider range of products and services.
Provide Increasingly Efficient and
Cost-Competitive Handling and Delivery Services.
We utilize our own warehouse and distribution facility in Baltimore County,
Maryland that serves the dual purpose of providing depot/warehousing capacity for just-in-time delivery and providing handling
capability and inventory control at the Baltimore, Maryland port of entry, our most active import location. This arrangement reduces
freight and handling expenses, while increasing efficiency. It also enables us to monitor deliveries and serve customers more
effectively.
Provide Additional Products and Value
Added Services.
We may add capability to provide our customers with additional value-added services such as processing, financing,
warehousing and distribution services.
The Industry
The industry in which we operate is the
sale and distribution of semi-finished aluminum and steel products. These products are manufactured worldwide by rolling facilities,
some of which are owned by large integrated companies and others by independent producers. The majority of the products we purchase
are in turn sold to distributors, who sell to varied metal working industries including the automotive, housing and packaging
industries.
Although demand for aluminum products
in the U.S. has been cyclical, over the longer-term, demand has continued to increase. We believe that this growth reflects general
population and economic growth, and the advantages of aluminum products, including light weight and a high degree of formability,
recyclability and resistance to corrosion. Demand for steel in the U.S. has been cyclical as well, and was negatively impacted
in recent years by depressed construction markets and general economic conditions.
The metals distribution industry in which
we operate is a highly fragmented industry. According to IBISWorld Inc. during 2016 the U.S. metals wholesale business generated
revenues of approximately $153 billion, a 24% decline over 2015 revenues as metal prices declined approximately 17%. Our largest
market area is the U.S., and our sales for the year ended 2016 were $339 million, a very small percentage of the overall market
size.
Although trends within the industries
above may impact overall demand for our products, we do not view our aluminum and steel sales in an industry specific manner (other
than aluminum versus steel) or analyze our financial results or generate growth strategy with an eye toward specific industries.
Most of our significant customers are general distributors who resell our products into various industries. They generally do
not provide us with data regarding where they resell our products. Our sales are affected by the level of our distributors’
inventory and their ability to resell such inventory, which in turn is affected by industry trends. Our marketing and growth strategies
are aimed at meeting the needs of distributors and providing whatever products they may need at any given time rather than targeting
any one particular product or seeking to expand our sales into any particular industry.
Within the semi-finished aluminum and
steel products industry, we believe that we occupy a specialized niche as an alternative supplier with prices generally lower
than those of our competitors. More specifically, our customers generally purchase semi-finished aluminum and steel products from
several sources besides us, and our products generally comprise a smaller percentage of the aluminum and steel products purchased
by our customers. In addition, we offer customers visibility into the general wholesale metals’ marketplace that our larger
competitors do not, since many of these competitors are vertically integrated, selling metal products they may have mined and
manufactured. We also offer our customers products from independent sources, which allow our customers to lessen their dependence
on an increasingly concentrated domestic supply chain. We believe the fact that most of our customers find it important to retain
us as an alternative supplier, coupled with our generally discounted prices and a high level of service, has shielded us from
the potential negative impact of volatility in metal prices that affects our industry as a whole. When metal prices previously
increased, our customers generally did not reduce their purchases from us, although they may have reduced such purchases from
other suppliers. See Risk Factors “Our future operating results could be impacted by the volatility of the prices of metals,
which could cause our results to be adversely affected” on page 11.
On the supply side, suppliers to our industry
include local mills and foreign suppliers. In addition, many of our largest competitors are vertically integrated, selling metal
products they may have mined and manufactured. Maintaining and expanding our access to aluminum and steel supply is critical given
the high demand for the aluminum and steel products we purchase. Since we purchase mainly from foreign suppliers, the major factors
influencing our supply is our ability to maintain and expand our existing relationships with suppliers and add new suppliers,
in particular through the services we provide as described under “Suppliers” below.
Our Products
We derive our revenues from the sale of
semi-finished aluminum and stainless steel products, which are produced by processing primary aluminum or steel and/or aluminum
or steel scrap. A product is considered “semi-finished” if it has not yet been converted into a final end-product.
Semi-finished products include aluminum sheet, coil, plate and foil, rod, bar and wire, extruded and cast products. We offer many
of these forms of semi-finished products to our customers, for use as follows:
|
·
|
Aluminum
Sheet/Coil.
Aluminum sheet/coil is used in many diverse industries, including
transportation, construction and food service. Common applications include road signs,
roofing, food wrappers, after-market automotive, and gas tanks for trailers.
|
|
·
|
Aluminum
Plate
. One of the primary industries for aluminum plate is transportation.
Common applications include ship building, automobiles and truck and dump bodies.
|
|
·
|
Aluminum
Treadplate
. Aluminum treadplate with a bright finish, better known as
“treadbright,” is used both for its cosmetic appearance and its durability.
Common uses are for industrial toolboxes, automotive runners and trimming.
|
|
·
|
Aluminum
Foil
. Aluminum foil is used primarily in the packaging industry. Common
applications include candy/gum wrappers as well as decorative wrapping for gifts.
|
|
·
|
Stainless
Steel
. Stainless steel coil, sheet and plate products are widely utilized
in applications in which aseptic and non-corrosive surfaces are essential. Common applications
include the food service and marine-related industries.
|
|
·
|
Carbon
Steel
. The uses of flat rolled carbon steel products span a myriad of
applications including construction, automotive and consumer-related uses. Products currently
supplied by us include hot rolled coils and plates, cold rolled and coated products such
as painted, galvanized and galvalume materials.
|
During the year ended December 31, 2016,
approximately 90% and 10% of our revenues were derived from the sale of aluminum products and steel products, respectively.
Demand for our products is not generally
seasonal.
Sales, Marketing and Customer Service
We sell our products primarily through
our own marketing and sales personnel. In addition, we sell less than 10% of our products through independent sales agents. We
currently utilize seven independent sales agents, three of whom are located in the United States. These sales agents are
compensated pursuant to individually negotiated terms, with exact compensation generally tied to a fixed rate and the amount of
products they actually sell.
Our inventory is comprised of material
that has been ordered by customers and is in transit or is being held pending delivery to such customers and material that we
stock to meet shorter delivery times to our customers.
We endeavor to support and grow our distribution
capabilities by providing customers with quality products, access to alternative sources of supply, and customer service. We offer
customers a range of services, including:
|
·
|
sourcing
products from the appropriate supplier in order to meet pricing and delivery requirements;
|
|
·
|
handling
foreign exchange transactions for purchases and sales in local currency;
|
|
·
|
assuming
responsibility for the shipment and timely delivery of the product to the customer;
|
|
·
|
assisting
customers in identifying materials and matching their particular needs;
|
|
·
|
where
necessary, arranging for subsequent metal processing and/or finishing services that may
be required by the customer;
|
|
·
|
arranging
for materials that have been ordered by a customer (and are subject to a firm purchase
commitment) to be stored at an appropriate warehouse for release to the customers on
a just-in-time delivery basis;
|
|
·
|
providing
customers with information concerning market trends and product development; and
|
|
·
|
making
available material from our own local stocks to meet customers’ short term requirements.
|
We carefully monitor the timing and processing
of orders to meet customers’ needs and commit to deliver orders within a time-period mutually agreed with the customer,
generally within a 30-day window. We maintain constant and ongoing communication with our suppliers in order to ensure that these
delivery dates are met and that customers are apprised of the delivery status of their orders.
Customers
We serve more than 300 customers in diverse
industries, such as distribution, transportation, automobile, housing, appliances and packaging. In the year ended December 31,
2016, our top ten customers represented approximately 41% of our total revenues, with one customer, Ryerson, Inc. accounting for
11.5% of total revenues. In the year ended December 31, 2015, our top ten customers represented approximately 37% of our total
revenues, with one customer, Ryerson Inc. accounting for 10% of total revenues. These ten customers included eight full-service
distribution centers (i.e., distributors that have the capacity to provide additional processing services), as well as two producers
of various consumer and industrial products. Our customers are principally located throughout the Americas, Australia, New Zealand
and Europe. Our U.S. customer base is not regional and with no significant geographic concentration in one state or region. During
the year ended December 31, 2016, our revenues were attributable to the following countries and regions: U.S. - 74%; Canada –
8%; Australia/New Zealand – 7%; Europe 10% and Latin America – 1%.
Customers generally place an order with
us by submitting a purchase order setting forth their desired products, specifications and date and location of delivery. We confirm
the transaction with our sales contract, which contains our standard terms and conditions, including a disclaimer of warranties,
indemnification of us by the buyer and certain protections in case of insolvency or potential insolvency by the buyer (e.g., the
right to terminate the contract and accelerate payments thereon) or the occurrence of certain contingencies that prevent us from
fulfilling the contract on time. Typically the risk of loss passes to the customer upon shipment or delivery. Pricing is negotiated
for each sales contract.
Suppliers
We maintain distribution arrangements
and/or ongoing commitments with several foreign mills. We act as bulk purchasers for these suppliers, which provides
them with the following benefits:
|
·
|
we
serve as an integrated marketing, distribution, and service channel for volume that our
suppliers wish to export;
|
|
·
|
we
purchase bulk capacity from suppliers;
|
|
·
|
we
typically assume responsibility for transporting the products that we purchase;
|
|
·
|
we
eliminate foreign currency risks for suppliers; and
|
|
·
|
we
ensure prompt payment to suppliers for materials purchased.
|
We strive to maintain long-term relationships
with our suppliers and to be a significant distributor for them. As a result, we are often able to obtain competitive pricing
and to influence quality standards and delivery practices. We continuously work with our existing suppliers and explore
other sources to strengthen our position in the market. Our principal suppliers are PT. Alumindo, Hulamin Ltd. And
Southeast Aluminium (China) Co., Ltd. We have written agreements with PT. Alumindo Light Metal Industries and Hulamin Ltd., the
material terms of which are summarized below:
PT. Alumindo Light Metal Industries.
Our supply agreement with PT. Alumindo and its affiliates provides for the supply to us of a minimum of 5,000 metric tons
of aluminum cold rolled coil per month, plus or minus 15% upon our written consent, to our specifications as set forth in our
purchase orders. Under this supply agreement, the suppliers are also required to use their reasonable efforts to deliver to us
an additional 500 metric tons of aluminum hot/cold rolled coil per month, plus or minus 15% upon our written consent. The suppliers’
obligations to third parties will at all times be subject to their ability to produce sufficient supply for us to meet the minimum
quantities set forth above. The price of the product shall be determined at least 60 days prior to the quarter in which the product
is to be manufactured. The suppliers must provide the products to us at the lowest price at which they offer the same products
to any third party in North America in equal or smaller quantities, and they are required to immediately lower existing prices
if a lower price is offered to any such third party. We were also a party to a pre-payment advance agreement with PT. Alumindo
and its affiliates pursuant to which we advanced a total of $10 million to these suppliers in order to augment their manufacturing
capabilities. The pre-payment advance became repayable to us beginning on January 1, 2013 in monthly installments of $277,777.78
and was fully repaid as of December 31, 2015. The supply agreement’s initial term ended on the date that the pre-payment
advance was fully repaid, but the supply agreement automatically renews for additional one year terms unless terminated by mutual
written consent or in writing by either party at least 60 days prior to the termination date of the then current term. We have
the right to terminate the supply agreement upon certain events of default, including the suppliers’ breach of the agreement,
failure to supply the product as specified in our purchase orders, becoming the subject of certain governmental demands, investigations
or determinations involving illegal or trade-related acts, insolvency, bankruptcy or similar events, default under any loan or
indebtedness or material adverse change in financial or other condition, or ability to perform under the agreement.
Hulamin Ltd.
Our agreement with
Hulamin Ltd. is a letter of understanding which states that Hulamin Ltd. will work closely with us in satisfying market requirements,
recognizing that we remain an important customer. The letter permits Hulamin Ltd. to sell its products directly to customers in
North America, except for foil products and certain bright tread products, for which we remain the exclusive importer and distributor.
Additionally, we are the exclusive importer and distributor of Hulamin’s rolled products in Australia and New Zealand.
Transportation
We arrange for transportation and delivery
of the products purchased by customers. When we purchase products from an overseas supplier, we accept delivery either
at the port in the supplier’s home country or at the port of destination. If we take delivery at a foreign port, we will
generally arrange for transportation to the port of destination on regularly scheduled port-to-port, sea-going transportation.
Upon delivery of the products at the destination port, we use trucking and rail services to deliver the products to our customers.
Competition
Our principal competitors are global aluminum
producers and rolling mills. Alcoa Inc., and Aleris Rolled Products, Inc. dominate the aluminum industry in North America
and are significantly larger than us, have significantly greater financial resources, and are active in significantly more areas
of the aluminum products business than we are, including mining, refining, smelting and recycling. These companies also have access
to material produced and imported from their own subsidiaries, which compete with us. There are also independent importers of
aluminum and steel products which serve the North American aluminum and steel distribution industry.
We compete with
these other importers, as well as agents that act for or purchase from foreign aluminum producers including one of our suppliers,
Hulamin Ltd. Our principal means of competition is market knowledge, customer service, and the ability to offer competitive terms
and product quality, including providing value-added services to our customers and providing a full range of product offerings.
We also believe that agents of foreign mills are generally less capable of providing the same value-added services to our customers,
because these agents are generally captive to a single foreign source and often lack the flexibility and range of product offerings
that we offer our customers. We further believe that by offering our customers a full range of products from independent sources,
we enable our customers to avoid dependency in an increasingly concentrated domestic supply chain.
Government Regulation
As our products are typically imported,
we are subject to governmental regulations governing imports, in particular regulations governing the imposition of tariffs and
antidumping and other duties. For the years ended December 31, 2016 and 2015, approximately 35% and 17%, respectively, of our
purchases of aluminum products were from countries whose exports were eligible for preferential tariff treatment for import into
the U.S. under the African Growth and Opportunity Act (“AGOA”) and the Generalized System of Preferences (“GSP”)
which had expired in 2013 and was reauthorized through December 31, 2017 in July 2015. Imports from such suppliers may be subjected
to a tariff instead of the duty-free treatment and to the extent that these increased costs could not be passed on to our customers,
our profit margins could suffer.
The products we import could also be subject
to antidumping or other increased duties, tariffs or taxes. For example, under U.S. law, an antidumping duty may be imposed on
any imports if two conditions are met. First, the Department of Commerce must decide that the imports are being sold in the U.S.
at less than fair value. Second, the International Trade Commission must determine that the U.S. industry is materially injured
or threatened with material injury by reason of the imports. The International Trade Commission’s determination of injury
involves a two-prong inquiry: first, whether the industry is materially injured, and second, whether the dumping, not other factors,
caused the injury. The International Trade Commission is required to analyze the volume of imports, the effect of imports on U.S.
prices for like merchandise, and the effects the imports have on U.S. producers of like products, taking into account many factors,
including lost sales, market share, profits, productivity, return on investment, and utilization of production capacity. Should
such a determination be made, in the U.S. or in any of the countries in which we operate, we could subject to additional costs
imposed on the affected imports.
Employees
As of December 31, 2016, we had approximately
60 full time
employees. We also have independent sales representatives located in the U.S. and
in Europe. None of our employees is represented under a collective bargaining agreement.
History
We were incorporated in the State of Delaware
in 1990 under the name Integrated Technology USA, Inc. Until September 17, 1999, we were in the business of designing, developing
and marketing products for emerging computer related markets.
On September 17, 1999, we merged with
Empire Resources, Inc. (“Empire”), a distributor of value added, semi-finished aluminum products. Since the merger,
we have continued the business of Empire under the name of Empire Resources, Inc.
Item 1A. Risk Factors.
Our operations and financial results
are subject to various risks and uncertainties, including those described below, which could adversely affect our business, financial
condition, results of operations, cash flows, and the trading price of our common stock.
Risks Related to Our Business and Industry
We are highly dependent on a few
suppliers.
Our three largest suppliers in 2016 were
PT. Alumindo, Hulamin Ltd. and Southeast Aluminium, from whom we purchased approximately 53% of our products. Accordingly, the
termination or limitation by one or more of our largest suppliers of their relationships with us could limit our ability to fulfill
customer orders or cause us to purchase products at a loss, which could have a material adverse effect on our business and results
of operations. In addition, our loss of any one of our other suppliers (or material default by any supplier in its obligations
to us) for any reason, including but not limited to bankruptcy, financial difficulties, expropriation, social unrest, destruction,
sabotage, strikes, natural disasters, acquisition by a person or entity unwilling to provide products to us, or for any other
reason, could limit our ability to fulfill customer orders or cause us to purchase products at a loss, or face costly legal consequences
which could have a material adverse effect on our business.
An interruption in the sources of
our metal supply could have a material adverse effect on our results of operations.
We rely on our suppliers to fulfill contractual
obligations. The failure of any one of our suppliers to fulfill its obligations to us may expose us to serious losses by requiring
us to purchase material at a loss in the open market and/or absorb losses for hedges applied to the defaulting supplier’s
transaction. Our primary suppliers could curtail or discontinue their delivery of metals to us in the quantities we need with
little or no notice. If our suppliers experience production problems, lack of capacity or transportation disruptions, we may be
unable to obtain sufficient amounts of metal on a timely basis, or we may not be able to obtain metal from alternate sources at
competitive prices to meet our delivery schedules.
In addition, in recent years, the metal
producing supply base has experienced significant consolidation, with a few domestic producers accounting for a majority of the
domestic metal market. The number of available suppliers could be reduced in the future by factors such as further industry consolidation
or bankruptcies affecting metal suppliers. Although we have successfully replaced suppliers lost as a result of industry consolidations
in the past, there can be no assurance that we will be able to replace the volume of production or the type of products supplied
by any of our current suppliers if they were acquired or their operations terminated or were interrupted.
The occurrence of any of these events
could have a material adverse effect on our business, financial condition, results of operations and cash flows.
We are highly dependent on a few
significant customers.
Our sales are highly concentrated among
a few customers. During the years ended December 31, 2016 and 2015, 41% and 37%, respectively, of our revenues were derived from
sales to ten customers. During 2016 and 2015 one customer accounted for 10% or more of our sales. Over the last several years,
there have been consolidations in the industries we serve that may increase our sales concentration and the related risks. Any
material reduction in sales to any of these customers could have a material adverse effect on our business. Our sales contracts
tend to be short term in nature. We typically sell our products on monthly or quarterly customer commitments. As a result, the
relationship, as well as particular orders, can generally be terminated with relatively little advance notice. The loss of any
one of our major customers or decrease in demand by those customers or credit constraints placed on them could have a material
adverse effect on our business, financial condition and results of operations.
The counterparties to our commodity
derivative instruments may not be able to perform their obligations to us, which could materially affect our cash flows and results
of operations.
In order to minimize risk associated with
fluctuations in commodity prices and foreign currency, we use derivative instruments to hedge aluminum pricing and foreign currency
risk as we deem appropriate for a majority of our purchase and sales contracts. We are exposed to the risk of a counterparty default
in fulfilling these derivative instruments. Should there be a counterparty default, we could be exposed to losses on the original
derivative instrument or be unable to recover anticipated gains from the transactions, which could result in decreased gross margins,
profitability and/or outright losses.
Not all of our purchases and our
inventory is hedged.
While we endeavor to hedge risks, it may
not be practical for some products, notably, stainless steel. As a result, we may be adversely affected by a decline in the prices
of unsold inventory.
Although we expect to finance our
future and in-process growth initiatives through borrowings under our credit facility, we may have to find additional sources
of funding, which could be difficult. Additionally, increased leverage could adversely impact our business and results of operations.
We expect to finance our future and in-process
growth initiatives through borrowings under our $275 million secured, asset-based credit facility. However, our credit facility
may not be sufficient or available to finance our growth initiatives, and we may have to find additional sources of financing.
It may be difficult for us in the future to obtain the necessary funds and liquidity to run and expand our business.
Additionally, if we incur substantial
additional debt, including under our credit facility, to finance future growth, our leverage could increase as could the risks
associated with such leverage. A high degree of leverage could have important consequences to us. For example, it could:
·
increase
our vulnerability to adverse economic and industry conditions;
·
require
us to dedicate a substantial portion of cash from operations to the payment of debt service, thereby reducing the availability
of cash to fund working capital, capital expenditures, dividends and other general corporate purposes;
·
limit
our ability to obtain additional financing for working capital, capital expenditures, general corporate purposes or acquisitions;
·
place
us at a disadvantage compared to our competitors that are less leveraged; and
·
limit
our flexibility in planning for, or reacting to, changes in our business.
We
may not be able to generate sufficient cash flow to meet our existing debt service obligations.
Our ability to generate sufficient cash
flow from operations to make scheduled payments on our debt obligations will depend on our future financial performance, which
will be affected by a range of economic, competitive and business factors, many of which are outside of our control. If we do
not generate sufficient cash flow from operations to satisfy our debt obligations, we may be required to undertake alternative
financing plans, such as refinancing or restructuring our debt, selling assets, reducing or delaying capital investments or seek
to raise additional capital. We may not be able to consummate any such transaction at all or on a timely basis or on terms, and
for proceeds, that are acceptable to us, and these transactions may not be permitted under the terms of our various debt instruments
then in effect. Our inability to generate sufficient cash flow to satisfy our debt obligations or to timely refinance our obligations
on acceptable terms could adversely affect our ability to serve our customers and could cause us to reduce or discontinue our
planned operations.
We service industries that are highly
cyclical, and any downturn in our customers’ demand could reduce our sales, margins and profitability.
Many of our products are sold to customers
in industries that experience significant fluctuations in demand based on economic conditions, energy prices, consumer demand,
availability of adequate credit and financing, customer inventory levels, changes in governmental policies (including those that
would limit or reduce defense spending) and other factors beyond our control. When one or more of our customers’ industries
experiences a decline, we may have difficulty increasing or maintaining our level of sales or profitability if we are not able
to divert sales of our products to customers in other industries.
We are vulnerable to interest rate
fluctuations on our indebtedness, which could hurt our operating results.
We are exposed to various interest rate
risks as a result of our indebtedness under our credit facility. Market risk arises from changes in variable interest rates of
our borrowings, which are primarily short-term LIBOR or money market based loans, which are subject to change. If interest rates
significantly increase, we could be unable to service our debt, or we would have to dedicate materially more of our resources
toward debt service, which could have a material adverse effect on our operating results.
We are dependent on our executive
officers and key employees.
We are highly dependent on the management
and leadership skills of our executive officers and other key employees, including Nathan Kahn, our chief executive officer, president
and a director, Sandra Kahn, our vice president, chief financial officer and a director, and Harvey Wrubel, our vice president
of sales/director of marketing and a director. There can be no assurance that these individuals will continue to provide services
to us. The loss of any of our executive officers or other key employees or the failure to attract and retain additional qualified
personnel could prevent us from implementing our business strategy and continuing to grow our business at a rate necessary to
maintain future profitability.
Many of our suppliers and customers
are located in international markets, which expose us to a number of risks.
We generally purchase metal products from
foreign suppliers, and our customers are principally located throughout the Americas, Australia, New Zealand and Europe. Thus,
our operations could be materially and adversely affected by changes in economic, political and social conditions in the countries
where we currently purchase or sell or may in the future purchase or sell such products, including the potential for adverse change
in the local political or social climate or in government policies, laws and regulations, restrictions on imports and exports
or sources of supply, and change in duties and taxes.
In addition, an act of war or terrorism
or major pandemic event could disrupt international shipping schedules, cause additional delays in importing our products into
the U.S. or increase the costs required to do so. Acts of crime or violence in these international markets could also adversely
affect our operating results. Fluctuations in the value of the U.S. dollar versus foreign currencies could reduce the value of
these assets as reported in our financial statements, which could reduce our stockholders’ equity. Our failure to adequately
anticipate and respond to these risks and the other risks inherent in international operations could have a material adverse effect
on our operating results.
We could be adversely affected by
violations of the U.S. Foreign Corrupt practices Act (“FCPA”) and other worldwide and bribery laws.
We are subject to the FCPA which prohibits
companies and their intermediaries from making payments to non-U.S. government officials for purposes of obtaining or retaining
business or securing any other improper advantage. We have policies and procedures in place to ensure that we comply with the
FCPA and similar laws; however, there is no assurance that such policies and procedures will protect us against liability under
the FCPA or related laws for actions taken by our employees and intermediaries with respect to our business. Failure to comply
with the FCPA and related laws could disrupt our business and lead to criminal and civil penalties including fines, suspension
of our ability to do business with the federal government and denial of government reimbursement of our products, which could
result in a material adverse impact on our business, financial condition, results of operations and cash flows. We could also
be adversely affected by any allegation that we violated such laws.
Our future operating results could
be impacted by the volatility of the prices of metals, which could cause our results to be adversely affected.
The metal industry is highly cyclical
and pricing can be volatile. The prices we pay for metals and the prices we charge our customers may fluctuate depending on many
factors, including general economic conditions (both domestic and international), competition, production levels, import duties
and other trade restrictions and currency fluctuations. We rely on long-term relationships with our suppliers but generally have
no long-term, fixed-price purchase contracts. Instead we purchase at prevailing market prices at the time orders are placed, typically
with discounts for quantity purchases. To the extent metal prices decline, we would generally expect lower sales and possibly
lower net income, depending on the timing of the price changes and the ability to pass price changes on to our customers. To the
extent we are not able to pass on to our customers any increases in our raw materials prices, our operating results may be adversely
affected. In addition, because we maintain substantial inventories of metals in order to meet short lead-times and the just-in-time
delivery requirements of our customers, a reduction in our selling prices could result in lower profitability or, in some cases,
losses, either of which could adversely impact our ability to remain in compliance with certain financial covenants in our loan
facilities, as well as result in us incurring impairment charges.
If suppliers fail to provide products
of sufficient quality, customer relationships and prices could be negatively affected.
Our relationships with our customers depend,
in part, on our ability to deliver products of the quality specified by those customers. We rely on certifications from our suppliers
that attest to the quality of the metals received from those suppliers for resale and generally, consistent with industry practice,
do not undertake independent testing of such metals. In the event that metal purchased from suppliers is deemed defective material
or deemed to not meet quality specifications as set forth in the certifications or customer specifications, we may be forced to
buy products of the specified quality from another source to fulfill the customer’s order. While we would then be left with
a claim against the supplier for any loss sustained by us, we may not be able to bring these claims successfully, particularly
in foreign jurisdictions. In addition, we could suffer damage to our reputation that may arise from sub-standard products and
possibly lose customers.
We are exposed to credit risk from
our customers.
We do not require collateral for customer
receivables. We have significant balances owing from customers that operate in cyclical industries and under leveraged conditions,
which may impair our collection of these receivables. We carry credit insurance with a 10% deductible covering the majority of
our customers, and we have set specific limits on each customer’s receivables. However, we sometimes elect to exceed these
specific credit limits, and in selected instances the co-pay may be increased. Our failure to collect a significant portion of
the amount due on our receivables directly from customers or through insurance claims (or other material default by customers)
could have a material adverse effect on our financial condition and results of operations.
We are subject to the risk of default
by our customers.
We rely on our customers to fulfill contractual
obligations. The failure of our customers to do so may expose us to serious losses and may force us to sell material at a loss
in the open market and/or absorb losses for metal hedges applied to the defaulting customer’s transaction. A default by
a single customer or multiple customers could have a material adverse effect on our financial condition and results of operations.
We could be held liable for any
product failures related to the products we manufactured at our extrusion facility.
As a result of the production that took
place at our extrusion facility prior to September 2009, when we ceased production at the facility, we may be exposed to potentially
serious risks such as product failure following distribution in the market. While we are not aware of any defects in our aluminum
extrusion products, defects in the products that we manufactured may result in serious and potentially fatal accidents which may
in turn result in substantial losses to us.
We rely upon our suppliers as to
the specifications of the metals we purchase from them.
We rely on mill certifications
that attest to the physical and chemical specifications of the metal received from our suppliers for resale and generally, consistent
with industry practice, do not undertake independent testing of such metals unless independent tests are required by customers.
We rely on customers to notify us of any metal that does not conform to the specifications certified by the supplying mill. In
the event that products from our foreign suppliers do not meet the specifications set forth in the mill certifications we may
be at greater risk of loss for claims for which we do not carry, or carry insufficient, insurance.
Significant changes to international
trade regulations could adversely affect our results of operations.
During the years ended December 31, 2016
and 2015, approximately 35% and 17%, respectively, of our purchases of aluminum products were from countries whose exports were
eligible for preferential tariff treatment for import into the U.S. under the African Growth and Opportunity Act (“AGOA”)
and the Generalized System of Preferences (“GSP”). GSP expired on July 31, 2013, and was reinstated retroactively
on June 29, 2015. If preferential tariff treatment of any of our suppliers that are currently eligible for such treatment
under AGOA becomes unavailable, then imports from such supplier may be subjected to a tariff instead of the duty-free treatment
those imports now enjoy. To the extent that these increased costs could not be passed on to our customers, our profit margins
could suffer. In fact, one of our suppliers, PT. Alumindo Light Metal Industry, exceeded the quota of imports permitted under
the GSP statute during 2011, and triggered the Competitive Needs Limit of the GSP program. As a result, imports from PT. Alumindo
Light Metal Industry are subject to a 3% duty as of July 1, 2012. This increase in duty rate, along with other duty increases
imposed on our other suppliers, could adversely affect our profit margins to the extent these increased costs cannot be passed
on to our customers, resulting in a material adverse effect on our business, financial condition and results of operations.
Antidumping and other duties or
taxes could be imposed on us, our suppliers and our products.
The imposition of an antidumping, countervailing
or other increased duty on any products that we import or from countries from which we import in any of our markets, could have
a material adverse effect on our financial condition. For example, under U.S. law, an antidumping duty may be imposed on any imports
if two conditions are met. First, the Department of Commerce must decide that the imports are being sold in the U.S. at less than
fair value. Second, the International Trade Commission must determine that the U.S. industry is materially injured or threatened
with material injury by reason of the imports. The International Trade Commission’s determination of injury involves a two-prong
inquiry: first, whether the industry is materially injured, and second, whether the dumping, not other factors, caused the injury.
The International Trade Commission is required to analyze the volume of imports, the effect of imports on U.S. prices for like
merchandise, and the effects the imports have on U.S. producers of like products, taking into account many factors, including
lost sales, market share, profits, productivity, return on investment, and utilization of production capacity. Additionally, there
could be sudden substantial changes in the way in which trade legislation is enacted in any one of our markets which could trigger
additional and even crippling duties to the products we import, causing us serious financial damage, including but limited to
financial penalties applied on a retroactive basis. We may also face penalties and or legal action from our suppliers and customers
for a failure to perform our obligations due to the imposition of such duties or taxes.
General global economic, credit
and capital market conditions have had and could continue to have an adverse impact on our business, operating results and financial
condition.
We are susceptible to macroeconomic downturns
in the U.S. and abroad which have had, and in the future may continue to have, an adverse effect on demand for our products and
our customers’ ability to pay for the products ordered and consequently impact our operating results, financial condition
and cash flows. Future negative economic conditions, could lead to reduced demand for our products, increased price competition,
reduced gross margins, increased risk of obsolete inventories and higher operating costs as a percentage of revenue.
Disruption of the capital and credit markets
may negatively impact our business, including our ability to access additional financing at a time when we would like, or need,
to access those markets to run or expand our business. These events may also make it more costly for us to raise capital through
the issuance of our equity securities and could reduce our net income by increasing our interest expense and other costs of capital.
The diminished availability of credit and other capital could also affect the industries we serve and could result in reduction
in sales volumes and increased credit and collection risks.
Our industry is highly competitive,
which may force us to lower our prices and may have an adverse effect on our operating results.
The principal markets that we serve are
highly competitive. Competition is based principally on price, service, quality, processing capabilities, inventory availability
and timely delivery. Many of our competitors are significantly larger than us, and many have captive sources of supply and significantly
greater access to capital and other resources or may choose to sell products below market pricing or below their own costs. Increased
competition could lower our margins or reduce our market share and have a material adverse effect on our financial performance.
Additionally, if our sources of supply were interrupted, our competitors could be in a position to capture our customers.
Increases in energy prices would
increase our operating costs, and we may be unable to pass all these increases on to our customers in the form of higher prices.
If our energy costs increase disproportionately
to our revenues, our earnings could be reduced. We use energy to transport our products. Our operating costs increase if energy
costs, including electricity, diesel fuel and natural gas, rise. During periods of higher energy costs, we may not be able to
recover our operating cost increases through price increases without reducing demand for our products. In addition, we generally
do not hedge our exposure to higher energy prices. Increases in energy prices will increase our operating costs and may reduce
our profitability if we are unable to pass all of the increases on to our customers.
Rising freight rate costs and lack
of adequate cargo space may affect our operations.
Substantially all of the products we distribute
require transportation, either through ocean vessels, rail or trucks. Increasing freight rates may materially adversely affect
our profit margin and lack of cargo space may affect our ability to deliver products in a timely manner. Further, labor disruptions
affecting ports or any of the means of transportation and handling we use to deliver our products may have an adverse effect on
our margins and overall competitive position.
The failure of our key computer-based
systems could have a material adverse effect on our business.
We currently maintain computer-based systems
in the operation of our business and we depend on these systems to a significant degree for all areas of business operations.
These systems are vulnerable to, among other things, damage or interruption from fire, flood, tornado, and other natural disasters,
power loss, computer system and network failures, operator negligence, physical and electronic loss of data or security breaches
and computer viruses. The destruction or failure of any one of our computer-based systems for any significant period of time could
materially adversely affect our business, financial condition, results of operations and cash flows.
Security breaches through cyber-attacks,
cyber-intrusions, or otherwise, could disrupt our IT networks and related systems.
Risks associated with security breaches,
whether through cyber-attacks or cyber-intrusions over the Internet, malware, computer viruses, attachments to e-mails, or otherwise,
against persons inside our organization, persons with access to systems inside our organization, the U.S. government, financial
markets or institutions, or major businesses, including tenants, could disrupt or disable networks and related systems, other
critical infrastructures, and the normal operation of business. The risk of a security breach or disruption, particularly
through cyber-attack or cyber-intrusion, including by computer hackers, foreign governments, and cyber-terrorists, has generally
increased as the number, intensity, and sophistication of attempted attacks and intrusions from around the world have increased.
Even though we may not be specifically targeted, cyber-attacks on the U.S. government, financial markets, financial institutions,
or other major businesses, including tenants, could disrupt our normal business operations and networks, which may in turn have
a material adverse impact on our financial condition and results of operations.
Our information technology (“IT”)
networks and related systems are essential to the operation of our business and our ability to perform day-to-day operations and
they are subject to cybersecurity risks and threats. It has been reported that unknown entities or groups have mounted cyber-attacks
on businesses and other organizations solely to disable or disrupt computer systems, disrupt operations and, in some cases, steal
data. Even the most well protected information, networks, systems, and facilities remain potentially vulnerable because the techniques
used in such attempted security breaches evolve and generally are not recognized until launched against a target, and in some
cases are designed not to be detected and, in fact, may not be detected. Due to the nature of cyber-attacks, breaches to
our systems could go unnoticed for a prolonged period of time. These cybersecurity risks could disrupt our operations and result
in downtime, loss of revenue, or the loss of critical data as well as result in higher costs to correct and remedy the effects
of such incidents. If our systems for protecting against cyber incidents or attacks prove to be insufficient and an incident were
to occur, it could have a material adverse effect on our business, financial condition, results of operations or cash flows. While,
to date, we have not experienced a cyber-attack or cyber-intrusion, we may not be able to anticipate or implement adequate security
barriers or other preventive measures.
We may face risks associated with
current or future litigation and claims.
Although we do not believe that we currently
face any material litigation or claims, there can be no guarantee that we will not, in the future, be involved in one or more
lawsuits, claims or other proceedings. These suits could concern issues including contract disputes, employment actions, employee
benefits, taxes, environmental, health and safety, personal injury and product liability matters. Due to the uncertainties of
litigation, we can give no assurance that we will prevail on any claims made against us in any such lawsuit. While it is not feasible
to predict the outcome of any pending lawsuits and claims, we do not believe that the disposition of any such pending matters
is likely to have an adverse effect on our financial condition or liquidity, although the resolution in any reporting period of
one of more of these matters could have an adverse effect on our operating results for that period. Also, we can give no assurance
that any other lawsuits or claims brought in the future will not have an adverse effect on our financial condition, liquidity
or operating results.
Risks Related our Common Stock
The interests of our controlling
stockholders may not coincide with yours and such controlling stockholder may make decisions with which you may disagree.
As of March 18, 2017, Nathan Kahn, our
chief executive officer, president and a director, and Sandra Kahn, our vice president, chief financial officer and a director,
beneficially owned approximately 46.3% of our outstanding common stock As a result, our controlling stockholders control substantially
all matters requiring stockholder approval, including the election of directors and approval of significant corporate transactions.
In addition, this concentration of ownership may delay or prevent a change in control of our company and make some future transactions
more difficult or impossible without the support of our controlling stockholders. The interests of our controlling stockholders
may not coincide with our interests or the interests of other stockholders.
Our common stock may be affected
by limited trading volume and price fluctuations, each of which could adversely impact the value of our common stock.
Historically, there has been relatively
limited trading volume in our common stock. As such, our common stock has experienced, and is likely to experience in the future,
significant price and volume fluctuations, which could adversely affect the market price of our common stock without regard to
our operating performance. In addition, we believe that factors such as quarterly fluctuations in our financial results and changes
in the overall economy or the condition of the financial markets could cause the price of our common stock to fluctuate substantially.
These fluctuations may also cause short sellers to enter the market from time to time in the belief that we will have poor results
in the future. We cannot predict the actions of market participants and, therefore, can offer no assurances that the market for
our stock will be stable or appreciate over time.
Our stock price may be volatile,
which could result in substantial losses for investors.
The market price of our common stock is
highly volatile and could fluctuate widely in response to various factors, many of which are beyond our control, including the
following:
|
·
|
additions
or departures of key personnel;
|
|
·
|
sales
of our common stock, including management shares;
|
|
·
|
our
ability to execute our business plan;
|
|
·
|
operating
results that fall below expectations;
|
|
·
|
loss
of any strategic relationship;
|
|
·
|
industry
developments; and
|
|
·
|
general
domestic or international economic, market and political conditions.
|
In addition, the securities markets have
from time to time experienced significant price and volume fluctuations that are unrelated to the operating performance of particular
companies. These market fluctuations may also significantly affect the market price of our common stock.
A significant number of our shares
are eligible for sale and their sale or potential sale may depress the market price of our common stock.
Sales of a significant number of shares
of our common stock in the public market could harm the market price of our common stock. In particular, all of our currently
outstanding shares of common stock are freely tradeable unless they are purchased by our “affiliates,” as defined
in Rule 144 under the Securities Act of 1933, as amended.
In addition, 50,000 shares are issuable
upon exercise of options. If any options are exercised, the shares issued upon exercise will be restricted, but may be sold under
Rule 144 after the applicable holding period has been satisfied and the satisfaction of certain other conditions.
In addition to the possibility that actual
sales of significant amounts of our common stock in the public market could harm our common stock price, the fact that our stockholders
have the ability to make such sales could create a circumstance commonly referred to as an “overhang,” in anticipation
of which the market price of our common stock could fall. The existence of an overhang, whether or not sales have occurred or
are occurring, could also make it more difficult for us to raise additional financing through the sale of equity or equity-related
securities in the future at a time and price that we deem reasonable or appropriate.
Although we have paid dividends
in prior periods, there can be no assurance that we will pay dividends in the future. As a result, any return on investment may
be limited to the value of our common stock.
Although we have paid dividends in prior
periods, there can be no assurance that we will pay dividends in the future. The payment of dividends on our common stock will
depend on our earnings, financial condition and other business and economic factors as our board of directors may consider relevant.
If we do not pay dividends, our common stock may be less valuable because a return on your investment will only occur if our stock
price appreciates.
If securities or industry analysts
do not publish research or publish inaccurate or unfavorable research about our business, our stock price and trading volume could
decline.
The trading market for our common stock
will depend in part on the research and reports that securities or industry analysts publish about us or our business. We do not
currently have research coverage by securities and industry analysts and you should not invest in our common stock in anticipation
that we will obtain such coverage. If we obtain securities or industry analyst coverage and if one or more of the analysts who
covers us downgrades our stock or publishes inaccurate or unfavorable research about our business, our stock price would likely
decline. If one or more of these analysts ceases coverage of us or fails to publish reports on us regularly, demand for our stock
could decrease, which could cause our stock price and trading volume to decline.
The requirements of being a public
company may strain our resources, divert management’s attention and affect our ability to attract and retain qualified board
members.
We are subject to the reporting requirements
of the Securities Exchange Act of 1934, as amended, (the “Exchange Act”) the Sarbanes-Oxley Act, the Dodd-Frank Act,
and other applicable securities rules and regulations. Compliance with these rules and regulations has increased and will continue
to increase our legal and financial compliance costs, make some activities more difficult, time-consuming or costly, and increase
demand on our systems and resources. The Sarbanes-Oxley Act requires, among other things, that we maintain effective disclosure
controls and procedures and internal control over financial reporting. In order to maintain and, if required, improve our disclosure
controls and procedures and internal control over financial reporting to meet this standard, significant resources and management
oversight may be required. As a result, management’s attention may be diverted from other business concerns, which could
harm our business and operating results. We may need to hire more employees in the future, which will increase our costs and expenses.
In addition, changing laws, regulations
and standards relating to corporate governance and public disclosure are creating uncertainty for public companies, increasing
legal and financial compliance costs and making some activities more time consuming. These laws, regulations and standards are
subject to varying interpretations, in many cases due to their lack of specificity, and, as a result, their application in practice
may evolve over time as new guidance is provided by regulatory and governing bodies. This could result in continuing uncertainty
regarding compliance matters and higher costs necessitated by ongoing revisions to disclosure and governance practices. We intend
to invest resources to comply with evolving laws, regulations and standards, and this investment may result in increased general
and administrative expenses and a diversion of management’s time and attention from revenue-generating activities to compliance
activities. If our efforts to comply with new laws, regulations and standards differ from the activities intended by regulatory
or governing bodies due to ambiguities related to practice, regulatory authorities may initiate legal proceedings against us and
our business may be harmed.
We also expect that being a public company
that is subject to these rules and regulations could make it more expensive for us to obtain director and officer liability insurance,
and we may be required to accept reduced coverage or incur substantially higher costs to obtain coverage. These factors could
also make it more difficult for us to attract and retain qualified members of our board of directors and qualified executive officers.
We are obligated to develop and
maintain proper and effective internal controls over financial reporting. We may not complete our analysis of our internal controls
over financial reporting in a timely manner, or these internal controls may not be determined to be effective, which may adversely
affect investor confidence in our company and, as a result, the value of our common stock.
We are required, pursuant to Section 404
of the Sarbanes-Oxley Act, to furnish a report by management on, among other things, the effectiveness of our internal control
over financial reporting for fiscal 2016. This assessment includes disclosure of any material weaknesses identified by our management
in our internal control over financial reporting.
These reporting and other obligations
place significant demands on our management, administrative, operational, internal audit and accounting resources. Any failure
to maintain effective internal controls could have a material adverse effect on our business, operating results and stock price.
Moreover, effective internal control is necessary for us to provide reliable financial reports and prevent fraud. If we cannot
provide reliable financial reports or prevent fraud, we may not be able to manage our business as effectively as we would if an
effective control environment existed, and our business and reputation with investors may be harmed. In addition, if we are unable
to assert that our internal control over financial reporting is effective, we could lose investor confidence in the accuracy and
completeness of our financial reports, which would cause the price of our common stock to decline.