false00018167082021FY12/31NoNoYesYesP2YP2YP4YP4Y0.500018167082021-01-012021-12-310001816708us-gaap:CommonStockMember2021-01-012021-12-310001816708us-gaap:WarrantMember2021-01-012021-12-3100018167082021-06-30iso4217:USD00018167082022-03-16xbrli:shares00018167082021-12-3100018167082020-12-310001816708owlt:SeriesAAndSeriesA1RedeemableConvertiblePreferredStockMember2020-12-31iso4217:USDxbrli:shares0001816708owlt:SeriesAAndSeriesA1RedeemableConvertiblePreferredStockMember2021-12-310001816708owlt:SeriesBAndSeriesB1RedeemableConvertiblePreferredStockMember2021-12-310001816708owlt:SeriesBAndSeriesB1RedeemableConvertiblePreferredStockMember2020-12-3100018167082020-01-012020-12-310001816708us-gaap:SeriesAPreferredStockMember2019-12-310001816708owlt:PreferredStockSeriesA1Member2019-12-310001816708us-gaap:SeriesBPreferredStockMember2019-12-310001816708owlt:PreferredStockSeriesB1Member2019-12-310001816708us-gaap:CommonStockMember2019-12-310001816708us-gaap:AdditionalPaidInCapitalMember2019-12-310001816708us-gaap:RetainedEarningsMember2019-12-3100018167082019-12-310001816708us-gaap:AdditionalPaidInCapitalMember2020-01-012020-12-310001816708us-gaap:CommonStockMember2020-01-012020-12-310001816708us-gaap:RetainedEarningsMember2020-01-012020-12-310001816708us-gaap:SeriesAPreferredStockMember2020-12-310001816708owlt:PreferredStockSeriesA1Member2020-12-310001816708us-gaap:SeriesBPreferredStockMember2020-12-310001816708owlt:PreferredStockSeriesB1Member2020-12-310001816708us-gaap:CommonStockMember2020-12-310001816708us-gaap:AdditionalPaidInCapitalMember2020-12-310001816708us-gaap:RetainedEarningsMember2020-12-310001816708us-gaap:SeriesAPreferredStockMember2021-01-012021-12-310001816708owlt:PreferredStockSeriesA1Member2021-01-012021-12-310001816708us-gaap:SeriesBPreferredStockMember2021-01-012021-12-310001816708owlt:PreferredStockSeriesB1Member2021-01-012021-12-310001816708us-gaap:CommonStockMember2021-01-012021-12-310001816708us-gaap:AdditionalPaidInCapitalMember2021-01-012021-12-310001816708us-gaap:RetainedEarningsMember2021-01-012021-12-310001816708us-gaap:SeriesAPreferredStockMember2021-12-310001816708owlt:PreferredStockSeriesA1Member2021-12-310001816708us-gaap:SeriesBPreferredStockMember2021-12-310001816708owlt:PreferredStockSeriesB1Member2021-12-310001816708us-gaap:CommonStockMember2021-12-310001816708us-gaap:AdditionalPaidInCapitalMember2021-12-310001816708us-gaap:RetainedEarningsMember2021-12-310001816708us-gaap:CommonStockMemberus-gaap:RedeemableConvertiblePreferredStockMember2021-12-31xbrli:pure0001816708owlt:CustomersForWhichReturnsAreExpectedToBeReceivedMember2021-12-310001816708owlt:ReturnedInventoryReceivedMember2021-12-310001816708srt:MinimumMemberus-gaap:FurnitureAndFixturesMember2021-01-012021-12-310001816708us-gaap:FurnitureAndFixturesMembersrt:MaximumMember2021-01-012021-12-310001816708srt:MinimumMemberus-gaap:LeaseholdImprovementsMember2021-01-012021-12-310001816708srt:MaximumMemberus-gaap:LeaseholdImprovementsMember2021-01-012021-12-310001816708srt:MinimumMemberus-gaap:SoftwareAndSoftwareDevelopmentCostsMember2021-01-012021-12-310001816708srt:MaximumMemberus-gaap:SoftwareAndSoftwareDevelopmentCostsMember2021-01-012021-12-310001816708owlt:ToolingAndManufacturingEquipmentMember2021-01-012021-12-310001816708us-gaap:ComputerEquipmentMember2021-01-012021-12-310001816708us-gaap:TrademarksMember2021-01-012021-12-310001816708us-gaap:PatentsMember2021-01-012021-12-310001816708owlt:FilmProductionCostsMember2021-01-012021-12-310001816708srt:MinimumMember2021-12-310001816708srt:MaximumMember2021-12-310001816708us-gaap:WarrantMember2021-12-310001816708owlt:OldOwletMember2021-07-152021-07-150001816708owlt:OldOwletMemberus-gaap:CommonClassAMember2021-07-150001816708owlt:OldOwletMemberus-gaap:CommonClassBMember2021-07-150001816708owlt:OldOwletMemberowlt:RelatedPartyConvertiblePromissoryMember2021-07-152021-07-150001816708owlt:OldOwletMember2021-07-150001816708owlt:OldOwletMemberowlt:RelatedPartyConvertiblePromissoryMember2021-07-150001816708owlt:OldOwletMemberus-gaap:SeriesAPreferredStockMember2021-07-152021-07-1500018167082021-07-152021-07-150001816708us-gaap:CommonClassAMemberowlt:SandbridgeMember2021-07-152021-07-150001816708owlt:SandbridgeMember2021-07-150001816708owlt:SandbridgeMember2021-07-152021-07-150001816708us-gaap:CommonClassBMemberowlt:SandbridgeMember2021-07-152021-07-150001816708us-gaap:CommonClassBMemberowlt:SandbridgeMember2021-07-150001816708owlt:PipeInvestorsMemberowlt:SandbridgeMember2021-07-152021-07-150001816708owlt:PipeInvestorsMemberowlt:SandbridgeMember2021-07-1500018167082021-07-150001816708owlt:PipeInvestorsMember2021-07-152021-07-150001816708owlt:SandbridgeMember2021-01-012021-12-310001816708us-gaap:AdditionalPaidInCapitalMember2021-07-152021-07-150001816708us-gaap:GeneralAndAdministrativeExpenseMember2021-01-012021-12-310001816708owlt:ToolingAndManufacturingEquipmentMember2021-12-310001816708owlt:ToolingAndManufacturingEquipmentMember2020-12-310001816708us-gaap:FurnitureAndFixturesMember2021-12-310001816708us-gaap:FurnitureAndFixturesMember2020-12-310001816708us-gaap:ComputerEquipmentMember2021-12-310001816708us-gaap:ComputerEquipmentMember2020-12-310001816708us-gaap:SoftwareDevelopmentMember2021-12-310001816708us-gaap:SoftwareDevelopmentMember2020-12-310001816708us-gaap:LeaseholdImprovementsMember2021-12-310001816708us-gaap:LeaseholdImprovementsMember2020-12-310001816708us-gaap:PropertyPlantAndEquipmentMember2021-01-012021-12-310001816708us-gaap:PropertyPlantAndEquipmentMember2020-01-012020-12-310001816708owlt:ToolingAndManufacturingEquipmentMember2020-01-012020-12-310001816708owlt:TermNotePayableToSvbMember2021-12-310001816708owlt:TermNotePayableToSvbMember2020-12-310001816708owlt:FinancedInsurancePremiumMember2021-12-310001816708owlt:FinancedInsurancePremiumMember2020-12-310001816708owlt:SmallBusinessAdministrationPaycheckProtectionProgramNotePayableMember2021-12-310001816708owlt:SmallBusinessAdministrationPaycheckProtectionProgramNotePayableMember2020-12-310001816708owlt:TermNotePayableToSvbMember2020-04-222020-04-220001816708srt:MinimumMemberowlt:TermNotePayableToSvbMemberus-gaap:PrimeRateMember2020-04-222020-04-220001816708srt:MaximumMemberowlt:TermNotePayableToSvbMemberus-gaap:PrimeRateMember2020-04-222020-04-220001816708owlt:TermNotePayableToSvbMember2020-01-012020-12-310001816708owlt:TermNotePayableToSvbMember2020-09-222020-09-220001816708owlt:TermNotePayableToSvbMember2021-11-012021-11-010001816708srt:MinimumMemberowlt:TermNotePayableToSvbMemberus-gaap:PrimeRateMember2021-11-012021-11-010001816708srt:MaximumMemberowlt:TermNotePayableToSvbMemberus-gaap:PrimeRateMember2021-11-012021-11-010001816708owlt:TermNotePayableToSvbMember2021-05-252021-05-250001816708owlt:TermNotePayableToSvbMember2021-01-012021-12-310001816708owlt:FinancedInsurancePremiumMember2021-01-012021-12-31owlt:Payment0001816708owlt:SmallBusinessAdministrationPaycheckProtectionProgramNotePayableMember2020-04-012020-04-300001816708owlt:SmallBusinessAdministrationPaycheckProtectionProgramNotePayableMember2020-04-300001816708owlt:SmallBusinessAdministrationPaycheckProtectionProgramNotePayableMember2021-06-152021-06-150001816708owlt:SmallBusinessAdministrationPaycheckProtectionProgramNotePayableMember2021-01-012021-12-310001816708us-gaap:LineOfCreditMember2021-12-310001816708srt:MinimumMemberus-gaap:LineOfCreditMemberowlt:StreamlinePeriodInEffectMemberus-gaap:PrimeRateMember2021-12-310001816708us-gaap:LineOfCreditMembersrt:MaximumMemberowlt:StreamlinePeriodInEffectMemberus-gaap:PrimeRateMember2021-12-310001816708srt:MinimumMemberowlt:StreamlinePeriodNotInEffectMemberus-gaap:LineOfCreditMember2021-12-310001816708owlt:StreamlinePeriodNotInEffectMemberus-gaap:LineOfCreditMembersrt:MaximumMember2021-12-310001816708us-gaap:LineOfCreditMember2020-12-310001816708us-gaap:LineOfCreditMember2021-03-310001816708us-gaap:LineOfCreditMember2021-05-012021-05-310001816708us-gaap:LineOfCreditMember2021-05-140001816708us-gaap:LineOfCreditMember2021-05-240001816708us-gaap:LineOfCreditMember2021-05-250001816708owlt:RelatedPartyConvertiblePromissoryMember2020-12-310001816708owlt:RelatedPartyConvertiblePromissoryMember2021-07-152021-07-150001816708owlt:RelatedPartyConvertiblePromissoryMember2020-01-012020-12-310001816708owlt:RelatedPartyConvertiblePromissoryMember2021-07-150001816708owlt:RelatedPartyConvertiblePromissoryMember2021-01-012021-12-310001816708owlt:CloudPlatformServicesMember2021-06-300001816708owlt:CloudPlatformServicesMember2021-06-012021-06-300001816708owlt:FutureProductManufacturingMember2021-08-310001816708owlt:FutureProductManufacturingMember2021-08-012021-08-3100018167082021-11-012021-11-30owlt:claim0001816708srt:MinimumMemberowlt:A2014EquityIncentivePlanMemberus-gaap:EmployeeStockOptionMember2021-01-012021-12-310001816708srt:MaximumMemberowlt:A2014EquityIncentivePlanMemberus-gaap:EmployeeStockOptionMember2021-01-012021-12-310001816708owlt:A2014EquityIncentivePlanMemberus-gaap:EmployeeStockOptionMember2021-01-012021-12-310001816708owlt:A2014EquityIncentivePlanMember2021-07-150001816708owlt:A2021IncentiveAwardPlanMember2021-12-310001816708owlt:A2021IncentiveAwardPlanMember2021-01-012021-12-310001816708srt:MinimumMemberowlt:A2021IncentiveAwardPlanMemberus-gaap:EmployeeStockOptionMember2021-01-012021-12-310001816708srt:MaximumMemberowlt:A2021IncentiveAwardPlanMemberus-gaap:EmployeeStockOptionMember2021-01-012021-12-310001816708owlt:A2021IncentiveAwardPlanMemberus-gaap:EmployeeStockOptionMember2021-01-012021-12-310001816708us-gaap:EmployeeStockOptionMember2021-01-012021-12-310001816708us-gaap:EmployeeStockOptionMember2020-01-012020-12-310001816708us-gaap:EmployeeStockOptionMemberus-gaap:ShareBasedCompensationAwardTrancheOneMember2021-01-012021-12-310001816708us-gaap:RestrictedStockUnitsRSUMember2021-01-012021-12-310001816708us-gaap:RestrictedStockUnitsRSUMember2020-01-012020-12-310001816708owlt:RestrictedStockUnitsRSUsFourYearVestingTermMember2021-01-012021-12-310001816708owlt:RestrictedStockUnitsRSUsFourYearVestingTermMemberus-gaap:ShareBasedCompensationAwardTrancheOneMember2021-01-012021-12-310001816708owlt:RestrictedStockUnitsRSUsTwoYearVestingTermMember2021-01-012021-12-310001816708owlt:RestrictedStockUnitsRSUsTwoYearVestingTermMemberus-gaap:ShareBasedCompensationAwardTrancheTwoMember2021-01-012021-12-310001816708us-gaap:RestrictedStockUnitsRSUMembersrt:DirectorMember2021-01-012021-12-310001816708us-gaap:RestrictedStockUnitsRSUMember2020-12-310001816708us-gaap:RestrictedStockUnitsRSUMember2019-12-310001816708us-gaap:RestrictedStockUnitsRSUMember2021-12-310001816708us-gaap:GeneralAndAdministrativeExpenseMember2020-01-012020-12-310001816708us-gaap:SellingAndMarketingExpenseMember2021-01-012021-12-310001816708us-gaap:SellingAndMarketingExpenseMember2020-01-012020-12-310001816708us-gaap:ResearchAndDevelopmentExpenseMember2021-01-012021-12-310001816708us-gaap:ResearchAndDevelopmentExpenseMember2020-01-012020-12-310001816708us-gaap:IPOMemberowlt:PublicSharesMember2020-09-172020-09-170001816708us-gaap:OverAllotmentOptionMemberowlt:PublicSharesMember2020-09-172020-09-170001816708us-gaap:OverAllotmentOptionMemberowlt:PublicSharesMember2020-09-170001816708us-gaap:IPOMemberowlt:PublicSharesMember2020-09-170001816708us-gaap:IPOMemberus-gaap:CommonClassAMember2020-09-170001816708owlt:PublicWarrantMemberus-gaap:IPOMember2020-09-170001816708owlt:PrivatePlacementWarrantMember2020-09-170001816708owlt:PrivatePlacementWarrantMember2020-09-172020-09-170001816708owlt:PublicWarrantMember2021-07-150001816708owlt:PrivatePlacementWarrantMember2021-07-150001816708srt:MinimumMemberowlt:WarrantsAndRightsSubjectToMandatoryRedemptionOneMemberus-gaap:CommonClassAMember2021-12-310001816708owlt:WarrantsAndRightsSubjectToMandatoryRedemptionOneMemberus-gaap:CommonClassAMember2021-12-310001816708owlt:WarrantsAndRightsSubjectToMandatoryRedemptionOneMemberus-gaap:CommonClassAMember2021-01-012021-12-31utr:D0001816708owlt:WarrantsAndRightsSubjectToMandatoryRedemptionOneMemberowlt:AdditionalOfferingMemberus-gaap:CommonClassAMember2021-12-310001816708owlt:PrivatePlacementWarrantMemberus-gaap:CommonClassAMember2021-12-310001816708owlt:WarrantsAndRightsSubjectToMandatoryRedemptionTwoMemberus-gaap:CommonClassAMember2021-12-310001816708owlt:WarrantsAndRightsSubjectToMandatoryRedemptionTwoMemberus-gaap:CommonClassAMember2021-01-012021-12-310001816708srt:MinimumMemberus-gaap:CommonClassAMember2021-12-310001816708srt:MinimumMemberus-gaap:CommonClassAMember2021-01-012021-12-310001816708owlt:AdditionalOfferingMemberus-gaap:CommonClassAMember2021-01-012021-12-310001816708owlt:SandbridgeMember2021-12-310001816708owlt:TwelvePointFiveZeroStockPriceMember2021-12-310001816708owlt:FifteenPointZeroZeroStockPriceMember2021-12-310001816708srt:MinimumMember2021-01-012021-12-310001816708us-gaap:FairValueInputsLevel1Memberus-gaap:MoneyMarketFundsMember2021-12-310001816708us-gaap:FairValueInputsLevel2Memberus-gaap:MoneyMarketFundsMember2021-12-310001816708us-gaap:FairValueInputsLevel3Memberus-gaap:MoneyMarketFundsMember2021-12-310001816708us-gaap:MoneyMarketFundsMember2021-12-310001816708us-gaap:FairValueInputsLevel1Member2021-12-310001816708us-gaap:FairValueInputsLevel2Member2021-12-310001816708us-gaap:FairValueInputsLevel3Member2021-12-310001816708us-gaap:FairValueInputsLevel1Memberowlt:CommonStockPublicWarrantsMember2021-12-310001816708us-gaap:FairValueInputsLevel2Memberowlt:CommonStockPublicWarrantsMember2021-12-310001816708us-gaap:FairValueInputsLevel3Memberowlt:CommonStockPublicWarrantsMember2021-12-310001816708owlt:CommonStockPublicWarrantsMember2021-12-310001816708us-gaap:FairValueInputsLevel1Memberowlt:CommonStockPrivateWarrantsMember2021-12-310001816708us-gaap:FairValueInputsLevel2Memberowlt:CommonStockPrivateWarrantsMember2021-12-310001816708us-gaap:FairValueInputsLevel3Memberowlt:CommonStockPrivateWarrantsMember2021-12-310001816708owlt:CommonStockPrivateWarrantsMember2021-12-310001816708us-gaap:FairValueInputsLevel1Memberus-gaap:MoneyMarketFundsMember2020-12-310001816708us-gaap:FairValueInputsLevel2Memberus-gaap:MoneyMarketFundsMember2020-12-310001816708us-gaap:FairValueInputsLevel3Memberus-gaap:MoneyMarketFundsMember2020-12-310001816708us-gaap:MoneyMarketFundsMember2020-12-310001816708us-gaap:FairValueInputsLevel1Member2020-12-310001816708us-gaap:FairValueInputsLevel2Member2020-12-310001816708us-gaap:FairValueInputsLevel3Member2020-12-310001816708owlt:PreferredStockWarrantsMemberus-gaap:FairValueInputsLevel1Member2020-12-310001816708owlt:PreferredStockWarrantsMemberus-gaap:FairValueInputsLevel2Member2020-12-310001816708us-gaap:FairValueInputsLevel3Memberowlt:PreferredStockWarrantsMember2020-12-310001816708owlt:PreferredStockWarrantsMember2020-12-310001816708owlt:PreferredStockWarrantsMemberus-gaap:MeasurementInputSharePriceMember2020-12-310001816708owlt:PreferredStockWarrantsMemberus-gaap:MeasurementInputExercisePriceMember2020-12-310001816708owlt:PreferredStockWarrantsMemberus-gaap:MeasurementInputExpectedTermMember2020-12-310001816708owlt:PreferredStockWarrantsMemberus-gaap:MeasurementInputRiskFreeInterestRateMember2020-12-310001816708owlt:PreferredStockWarrantsMemberus-gaap:MeasurementInputPriceVolatilityMember2020-12-310001816708owlt:PreferredStockWarrantsMemberus-gaap:MeasurementInputExpectedDividendRateMember2020-12-310001816708owlt:PreferredStockWarrantsMember2021-01-012021-12-310001816708owlt:PreferredStockWarrantsMember2021-12-310001816708owlt:PreferredStockWarrantsMember2019-12-310001816708owlt:PreferredStockWarrantsMember2020-01-012020-12-310001816708us-gaap:DomesticCountryMember2021-12-310001816708us-gaap:StateAndLocalJurisdictionMember2021-12-310001816708owlt:OldOwletMemberowlt:CommonStockWarrantsMember2020-01-012020-12-310001816708owlt:OldOwletMemberowlt:PreferredStockWarrantsMember2020-01-012020-12-310001816708us-gaap:PreferredStockMemberowlt:OldOwletMember2020-01-012020-12-310001816708owlt:OldOwletMemberowlt:ConvertibleNotesMember2020-01-012020-12-310001816708owlt:CommonStockWarrantsMember2021-01-012021-12-31owlt:segment0001816708country:US2021-01-012021-12-310001816708country:US2020-01-012020-12-310001816708us-gaap:NonUsMember2021-01-012021-12-310001816708us-gaap:NonUsMember2020-01-012020-12-310001816708us-gaap:CustomerConcentrationRiskMemberowlt:Customer1Memberus-gaap:RevenueFromContractWithCustomerMember2021-01-012021-12-310001816708us-gaap:CustomerConcentrationRiskMemberowlt:Customer1Memberus-gaap:RevenueFromContractWithCustomerMember2020-01-012020-12-310001816708us-gaap:CustomerConcentrationRiskMemberowlt:Customer2Memberus-gaap:RevenueFromContractWithCustomerMember2021-01-012021-12-310001816708us-gaap:CustomerConcentrationRiskMemberowlt:Customer2Memberus-gaap:RevenueFromContractWithCustomerMember2020-01-012020-12-310001816708us-gaap:CustomerConcentrationRiskMemberowlt:Customer3Memberus-gaap:RevenueFromContractWithCustomerMember2021-01-012021-12-310001816708us-gaap:CustomerConcentrationRiskMemberowlt:Customer3Memberus-gaap:RevenueFromContractWithCustomerMember2020-01-012020-12-310001816708country:US2021-12-310001816708country:US2020-12-310001816708us-gaap:NonUsMember2021-12-310001816708us-gaap:NonUsMember2020-12-310001816708srt:MinimumMemberus-gaap:SubsequentEventMemberowlt:TermNotePayableToSvbMemberus-gaap:PrimeRateMember2022-01-312022-01-310001816708srt:MaximumMemberus-gaap:SubsequentEventMemberowlt:TermNotePayableToSvbMemberus-gaap:PrimeRateMember2022-01-312022-01-310001816708srt:MinimumMemberus-gaap:LineOfCreditMemberus-gaap:SubsequentEventMemberowlt:StreamlinePeriodInEffectMemberus-gaap:PrimeRateMember2022-01-310001816708srt:MaximumMemberus-gaap:LineOfCreditMemberus-gaap:SubsequentEventMemberowlt:StreamlinePeriodInEffectMemberus-gaap:PrimeRateMember2022-01-310001816708srt:MinimumMemberowlt:StreamlinePeriodNotInEffectMemberus-gaap:LineOfCreditMemberus-gaap:SubsequentEventMember2022-01-310001816708owlt:StreamlinePeriodNotInEffectMemberus-gaap:LineOfCreditMembersrt:MaximumMemberus-gaap:SubsequentEventMember2022-01-310001816708us-gaap:LineOfCreditMemberus-gaap:SubsequentEventMember2022-01-31

UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
 
FORM 10-K

(Mark One)
ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
For the fiscal year ended December 31, 2021
OR
TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934 FOR THE TRANSITION PERIOD FROM                      TO                     
Commission File Number 001-39516

Owlet, Inc.
(Exact name of Registrant as specified in its Charter)

 
Delaware 85-1615012
(State or other jurisdiction of
incorporation or organization)
(I.R.S. Employer
Identification No.)
2500 Executive Parkway, Ste. 500
Lehi, UT
84043
(Address of principal executive offices) (Zip Code)
Registrant’s telephone number, including area code: (844) 334-5330
 
Securities registered pursuant to Section 12(b) of the Act:

Title of each class
Trading
Symbol(s)
Name of each exchange on which registered
Common stock, $0.0001 par value per share OWLT New York Stock Exchange
Warrants to purchase common stock OWLT WS New York Stock Exchange

Securities registered pursuant to Section 12(g) of the Act: None
Indicate by check mark if the Registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. YES ☐     NO ☒
Indicate by check mark if the Registrant is not required to file reports pursuant to Section 13 or 15(d) of the Act.  YES      NO 
Indicate by check mark whether the Registrant: (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the Registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.  YES      NO 
Indicate by check mark whether the Registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the Registrant was required to submit such files).  YES      NO 
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and “emerging growth company” in Rule 12b-2 of the Exchange Act.

Large accelerated filer Accelerated filer
Non-accelerated filer Smaller reporting company
Emerging growth company

If an emerging growth company, indicate by check mark if the Registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act.  
Indicate by check mark whether the Registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit report.  
Indicate by check mark whether the Registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).  YES      NO 
The aggregate market value of the voting and non-voting common equity held by non-affiliates of the Registrant was approximately $229.5 million based on the closing market price as of the close of business on June 30, 2021, the last business day of the Registrant's most recently completed second fiscal quarter.
The number of shares of Registrant’s Common Stock outstanding as of March 16, 2022 was 113,067,484.
DOCUMENTS INCORPORATED BY REFERENCE
None.





Table of Contents

Page
1
5
1
Reserved

i


CAUTIONARY NOTE REGARDING FORWARD-LOOKING STATEMENTS
This Annual Report on Form 10-K (this “Report”) contains forward-looking statements. All statements other than statements of historical facts contained in this Report, including statements concerning possible or assumed future actions, business strategies, events or results of operations, and any statements that refer to projections, forecasts or other characterizations of future events or circumstances, including any underlying assumptions, are forward-looking statements. These statements involve known and unknown risks, uncertainties and other important factors that may cause our actual results, performance or achievements to be materially different from any future results, performance or achievements expressed or implied by the forward-looking statements.
In some cases, you can identify forward-looking statements by terms such as “may,” “should,” “expect,” “plan,” “anticipate,” “could,” “intend,” “target,” “project,” “contemplate,” “believe,” “estimate,” “predict,” “potential” or “continue” or the negative of these terms or other similar expressions. The forward-looking statements in this Report are only predictions. We have based these forward-looking statements largely on our current expectations and projections about future events and financial trends that we believe may affect our business, financial condition and results of operations. These forward-looking statements speak only as of the date of this Report and are subject to a number of risks, uncertainties and assumptions described under the sections in this Report entitled "Risk Factors" and "Management's Discussion and Analysis of Financial Condition and Results of Operations" and elsewhere in this Report. These forward-looking statements are subject to numerous risks, including, without limitation, the following:

the impact of the Warning Letter, dated October 1, 2021, from the United States Food and Drug Administration, the subsequent suspension of distribution of the Owlet Smart Sock in the U.S. and our ability to obtain marketing authorization for the Owlet Smart Sock or initiate distribution of the Owlet Dream Sock;
the impact of the COVID-19 pandemic on our business, financial condition, results of operations, supply chain constraints, and logistics;
our ability to realize the benefits of the Merger, which may be affected by, among other things, competition and our ability to grow and manage growth profitably;
legal proceedings, regulatory disputes, and governmental inquiries;
privacy and data protection laws, privacy or data breaches, or the loss of data;
the impact of changes in consumer spending patterns, consumer preferences, local, regional and national economic conditions, crime, weather, demographic trends and employee availability;
any defects in new products or enhancements to existing products;
our ability to continue to develop new products and innovations to meet constantly evolving customer demands;
our ability to obtain and maintain regulatory approval or certification for our products, and any related restrictions and limitations of any approved or certified product;
expectations regarding developments with regulatory bodies, and the timeline for related submissions by us and decisions by the regulatory bodies and notified bodies;
our ability to hire, retain, manage and motivate employees, including key personnel;
our ability to enhance future operating and financial results;
changes in and our compliance with laws and regulations applicable to our business;
our ability to upgrade and maintain our information technology systems;
our ability to acquire and protect intellectual property;
our ability to successfully deploy the proceeds from the Merger; and
our ability to raise financing in the future.
These risks and other important factors, including those discussed in this Report, may cause our actual results, performance or achievements to differ materially from any future results, performance or achievements expressed or implied by these forward-looking statements. Moreover, we operate in an evolving environment. New risk factors and uncertainties may emerge from time to time, and it is not possible for management to predict all risk factors and
uncertainties. Given these risks and uncertainties, you are cautioned not to place undue reliance on such forward-looking statements. The forward-looking statements included elsewhere in this Report are not guarantees of future performance and our actual results of operations, financial condition and liquidity, and the development of the industry in which we operate, may differ materially from the forward-looking statements included elsewhere in this
1


Report. In addition, even if our results of operations, financial condition and liquidity, and events in the industry in which we operate, are consistent with the forward-looking statements included elsewhere in this Report, they may not be predictive of results or developments in future periods.
Any forward-looking statement that we make in this Report speaks only as of the date of such statement. Except as required by law, we do not undertake any obligation to update or revise, or to publicly announce any update or revision to, any of the forward-looking statements, whether as a result of new information, future events or otherwise, after the date of this Report.

As used in this Report, unless otherwise stated or the context otherwise requires: “we,” “us,” “our,” “Owlet,” the “Company,” and similar references refer to Owlet Baby Care Inc. and its consolidated subsidiary before the Merger transaction with Sandbridge Acquisition Corporation and to Owlet, Inc. and its consolidated subsidiaries after the Merger transaction with Sandbridge Acquisition Corporation.
2


Summary of Principal Risks Associated with Our Business

Our business is subject to numerous risks and uncertainties that represent challenges that we face in connection with the successful implementation of our strategy and the growth of our business. In particular, the following considerations, among others, may offset our competitive strengths or have a negative effect on our business strategy or operating results, which could cause a decline in the price of shares of our common stock:
We have a limited operating history and have grown significantly in a short period of time.
We have a history of net losses, and we may not achieve or maintain profitability in the future.
We ceased distribution of the Owlet Smart Sock in the U.S. in October 2021 following receipt of a Warning Letter from the U.S. Food and Drug Administration (the “FDA”) and we will not be able to market and sell the Owlet Smart Sock with the same features and claims unless and until we receive marketing authorization from the FDA, which we may not receive in a timely fashion, or at all. 
In December 2021, we began initial shipments to our retail partners for the January 2022 launch of a new product in the U.S. called the Owlet Dream Sock. We are pursuing marketing authorization for notification features based on oxygen level and heart rate in the Owlet Smart Sock that were the subject of the Warning Letter in the U.S. The FDA may allege that the Owlet Dream Sock is also a medical device that cannot be marketed without first receiving FDA marketing authorization.
If any governmental authority or notified body were to require marketing authorization or similar certification for the Owlet Smart Sock, Owlet Dream Sock, or for any other product that we sell and which Owlet does not believe requires such marketing authorization or certification, we could be subject to regulatory enforcement action and/or required to cease selling or recall the product pending receipt of marketing authorization or similar certification from such other governmental authority or notified body, which can be a lengthy and time-consuming process, harm financial results and have long-term negative effects on our operations.
Our products rely on mobile applications to function and we rely on Apple’s App Store and the Google Play Store for distribution of our mobile applications and Apple or Google may unilaterally remove our mobile applications from distribution.
A substantial portion of our sales comes through a limited number of channel partners and resellers.
We will need to continue to increase the size of our organization and, if we fail to manage our growth effectively, our business could be materially and adversely affected.
We are required to obtain and maintain marketing authorizations or certifications from the FDA, foreign regulatory authorities or notified bodies for any products intended to be and/or classified as medical device products in the U.S. or in foreign jurisdictions, which can be a lengthy and time-consuming process, and a failure to do so on a timely basis, or at all, could severely harm our business.
We currently rely on a single manufacturer for the assembly of the Owlet Smart Sock and Owlet Dream Sock and a single manufacturer for the assembly of the Owlet Cam and expect to rely on limited manufacturers for future products. If we encounter manufacturing problems or delays, we may be unable to promptly transition to alternative manufacturers and our ability to generate revenue will be limited.
If we are unable to obtain key materials and components from sole or limited source suppliers, we will not be able to deliver our products to customers.
If we are unable to adequately protect our intellectual property rights, or if we are accused of infringing on the intellectual property rights of others, our competitive position could be harmed or we could be required to incur significant expenses to enforce or defend our rights or to pay damages.
We rely significantly on information technology (“IT”) and any failure, inadequacy, interruption or security lapse of that technology, including any cybersecurity incidents, could lead to misappropriation of confidential or otherwise protected information and harm our business and our ability to operate our business effectively.
We are involved, and may become involved in the future, in disputes and other legal or regulatory proceedings that, if adversely decided or settled, could materially and adversely affect our business, financial condition and results of operations.
We face the risk of product liability claims and the amount of insurance coverage held now or in the future may not be adequate to cover all liabilities we might incur.
Increased expansion into international markets, including Europe, Asia, the Middle East, Africa and Latin America, exposes us to additional business, political, regulatory, operational, financial and economic risks.
We are expanding into international markets and may be required to obtain and maintain regulatory authorizations or certifications in order to commercialize our products in these markets, and failure to
3


obtain regulatory authorizations or certifications in relevant foreign jurisdictions may prevent us from marketing medical device products abroad.
Our success depends substantially on our reputation and brand.
Some of our products and services are in development or have been recently introduced into the market and may not achieve market acceptance, which could limit our growth and adversely affect our business, financial condition and results of operations.
We may acquire other businesses or form other joint ventures or make investments in other companies or technologies but have no experience in doing so. These types of transactions could negatively affect our operating results, dilute our stockholders’ ownership, increase debt, lead to significant expense or cause us to lose focus on core operations.
We have identified material weaknesses in our internal control over financial reporting and we may identify additional material weaknesses in the future or otherwise fail to maintain effective internal control over financial reporting, which may result in material misstatements of our consolidated financial statements, cause us to fail to meet our periodic reporting obligations or cause our access to the capital markets to be impaired.
We may need to raise additional capital in the future in order to execute our strategic plan, which may not be available on terms acceptable to us, or at all.
Our business, financial condition, results of operations and growth may be impacted by the effects of the COVID-19 pandemic.
4


PART I
Item 1. Business.
We are Owlet

Becoming a parent is a life-changing milestone. New mothers and fathers become caregivers overnight and share the same primary concerns of sleep, safety, health and well-being. Parents, who are increasingly older and busier, assume the roles of doctor, dietitian, and sleep trainer. In many cases, parents receive minimal guidance, counseling, or affirmation of how well they are caring for their newborn, which often leads to increased anxiety and feelings of worry. As a result, parents lose valuable sleep during the first year of an infant’s life, impacting their ability to feel well-rested.

Enter Owlet. Kurt Workman, Jordan Monroe, Zack Bomsta, and Jake Colvin founded Owlet because they wanted access to real-time data to give them peace of mind as new parents. Infant monitoring solutions were highly fragmented and provided limited real-time awareness, leading to a less-than-optimal solution for concerned parents. There was also no product on the market available for parents to track a baby’s sleep patterns, oxygen levels, and heart rate at home. Our founders’ love for their children inspired them to launch Owlet in 2012 and create the Owlet Smart Sock (the "Owlet Smart Sock"), which was first sold in 2015.
Our Company's mission is to empower parents with the right information at the right time, to give them more peace of mind and help them find more joy in the journey of parenting. Our digital parenting platform aims to give parents real-time data and insights to help parents feel calmer and more confident. We believe that every parent deserves peace of mind and the opportunity to feel well-rested. We also believe that every child deserves to live a long, happy, and healthy life, and are working to develop products to help further those beliefs. Our ecosystem of digital parenting solutions is helping to transform modern parenting by providing parents data-driven insights into their children’s well-being in the comfort of their own home. We are also developing in-home pediatric monitoring and analytics technologies, which we believe have the potential to provide parents with additional information about their children and are also designed to notify parents and caregivers of certain biometric findings with the goal of reducing risk of infant death due to Sudden Unexplained Infant Death (SUID) and Sudden Infant Death Syndrome (SIDS) and opportunistically detecting infant ailments such as respiratory syncytial virus (RSV) and supraventricular tachycardia (SVT).

Our Platform
Our purpose-built, growing suite of connected digital parenting products and services is designed to help parents know more about their children and gain peace of mind in their roles as caregivers. We have developed deep and enduring relationships with our users and brand advocates around the world. These relationships continue to grow and develop as a result of our novel product and software additions to our connected ecosystem, feature enhancements, omni-channel distribution, and marketing efforts.
In order to make our products and services easy to find, our products are available for purchase at global and national retail stores as well as through online channels on Amazon.com and other online retail sites as well as our direct-to-consumer channel on our country-specific websites. Through these websites, we connect directly with our users, offer education on products and software, and gain valuable feedback from our users.
Superior Solutions for Parenting
Through our existing platform and future development pipeline of products and services designed to span from conception to kindergarten, we are committed to changing what it means to be a parent in the modern age. Through innovative hardware and software solutions utilizing proprietary algorithms, we give parents access to information about their children, in addition to the ability to see and hear their children wherever they may be. These offerings are designed to complement parents’ intuition, leading to a more joyful parenting experience.

Food and Drug Administration Warning Letter

On October 1, 2021, the Company received a Warning Letter, dated the same date (the “Warning Letter”), from the U.S. Food and Drug Administration (“FDA”) regarding the Smart Sock. The Warning Letter asserts that the Company’s marketing of its Owlet Smart Sock product in the U.S. renders the Owlet Smart Sock a medical device requiring premarket clearance or approval from the FDA, and that the Company has not obtained such clearance or approval in violation of the Federal Food, Drug, and Cosmetic Act. The Warning Letter is focused solely on the regulatory classification of the product in the U.S. as a result of the heart rate and oxygen notifications and related claims. Pursuant to the Warning Letter and in response to the request by the FDA to cease distribution of the Owlet
5


Smart Sock in the U.S., the Company suspended distribution of the Owlet Smart Sock in the U.S. in October 2021. The suspension is specific to shipments by the Company to customers and retailers in the U.S. Operations in other countries remain unaffected. In response to the Warning Letter, several national retailers unilaterally suspended U.S. sales of the Owlet Smart Sock and Owlet Monitor Duo.

In October 2021, the Company announced that it was developing a new sleep monitoring sock (the "Owlet Dream Sock"). The Company began initial distribution of the Owlet Dream Sock in December 2021 through our ecosystem partners and in January 2022 launched the Owlet Dream Sock to consumers in the retail and direct-to-consumer channels. The Owlet Dream Sock is sold as a consumer wellness product, which the Company believes does not present the same concerns that FDA has raised regarding the Owlet Smart Sock, based on differences in the functionality of and marketing claims for the new product.

The Company plans to submit an application to FDA seeking marketing authorization for the notification features of the Owlet Smart Sock that the FDA believes make the product a medical device. The Company cannot give any assurances that FDA will accept the Company’s application seeking marketing authorization for the notification features as a medical device or that, even if such application is accepted for review, that FDA will grant marketing authorization for those notification features. The Company also cannot give any assurances that FDA will not raise similar concerns regarding the regulatory status of the Owlet Dream Sock. The Company also cannot give any assurances as to the timing of the resolution of such matters.

As a result of the Warning Letter, the Owlet Care App is no longer available for download in Apple's App Store to users in the U.S. The Owlet Dream App has been released and is available for download for Owlet Dream Sock users and for users who have elected to convert their Owlet Smart Sock into an Owlet Dream Sock via software update.
Existing Offerings

Sock Monitor Offerings
Smart Sock– The award-winning Owlet Smart Sock is the first intelligent baby monitor to track an infant’s oxygen levels, heart rate, and sleep trends. The Owlet Smart Sock allows parents to view their baby’s heart rate and oxygen readings in real time from the Owlet application. If the baby’s readings leave preset zones, parents are notified through the Owlet Care App and a nearby base station. The Owlet Smart Sock is not currently available for sale in the U.S. We are engaging with the FDA to obtain feedback on our efforts to pursue marketing authorization for notification features based on heart rate and oxygen level in the U.S. and with regulatory bodies and notified bodies to obtain similar authorization and certification in certain foreign jurisdictions, as required, for any features of the Owlet Smart Sock considered by those regulatory bodies to render them medical devices. We sell the Owlet Smart Sock in international markets.
Dream Sock and Dream Sock Plus– With initial distribution to our ecosystem partners in December 2021, and a consumer launch in the retail and direct-to-consumer channels in January 2022, the award-winning Owlet Dream Sock helps parents understand their baby's sleep and know when to assist their baby for better sleep. The Owlet Dream Sock and accompanying Owlet Dream App allow parents to view their baby's sleep quality indicators, including wakings, heart rate, and movement. The Owlet Dream Sock Plus utilizes the same core technology as the Owlet Dream Sock and is designed to grow with children, from newborn to five years through an expanded fabric sock set. The Owlet Dream Sock and Dream Sock Plus are only available in the U.S. market.
Cam– The Owlet Cam turns any smartphone into an intelligent baby monitor, allowing parents to hear and see everything that is most important to them from anywhere in high-definition clarity. The Owlet Cam includes a wide-angle view, sound and motion notifications, and background audio to ensure parents never miss a moment. The Owlet Cam streams secure, encrypted video to parents’ own private accounts on the Owlet application. The Company plans to launch a new version of the Owlet Cam in 2022.
Monitor Duo / Dream Duo – The Owlet Monitor Duo and Owlet Dream Duo offer the award-winning Sock Monitor offerings paired with the Owlet Cam, combining the intelligence of our Sock Monitor offerings with high-definition video, offering parents the most complete picture of their baby’s sleep. The Owlet Monitor Duo is not available in the U.S. or Canada, and the Owlet Dream Duo is only available in the U.S.
Dream Lab– Owlet Dream Lab is an interactive online platform that assists families in building healthy sleep habits with their babies of up to 12 months in age. Designed in partnership with pediatric sleep experts, Owlet Dream Lab offers personalized step-by-step sleep plans, video tutorials, and access to twice-weekly webinars for live support.
6


Accessories– Owlet's accessories product line includes the Owlet Sleeper, a wearable rayon blanket that encourages safe sleep, best for babies ages 3-6 months old. The Owlet Sleeper features a full-length zipper for easy access during late night changes.
In addition to our existing offerings, we believe our development pipeline will provide us an opportunity to increase our total addressable market and customer lifetime value. We are designing these pipeline offerings to complement our existing suite of solutions and create a more connected and comprehensive digital parenting ecosystem.
Monitoring Pipeline

Sock Versions:
Smart Sock Plus– The Owlet Smart Sock Plus utilizes the same technology as the Owlet Smart Sock and is designed to grow with children, from newborn to five years. Through an expanded fabric sock set, the Owlet Smart Sock Plus allows families to track oxygen levels, heart rates, and sleep trends for an age range that is three times larger than that of the existing Owlet Smart Sock. The Owlet Smart Sock Plus is not available in the U.S.
Over-the-Counter “OTC” Smart Sock– The Owlet OTC Smart Sock is under development as a medical device that would, if authorized by the FDA, be sold over-the-counter at retailers without a prescription. Long-term, the Owlet OTC Smart Sock is designed to be able to integrate with various telehealth platforms and preemptively screen for health conditions in babies with no existing medical or health issues. We anticipate that the Owlet OTC Smart Sock will require marketing authorization from the FDA prior to commercialization.
BabySat– Based on the Owlet Smart Sock, the Owlet BabySat is under development as a medical device that would, if authorized by the FDA, be sold for prescription use only. The Owlet BabySat is designed to be able to be utilized by various telehealth platforms and is designed specifically for babies with diagnosed illnesses and health conditions. We have submitted a premarket notification to the FDA seeking 510(k) clearance of the Owlet BabySat. In January 2021, the FDA informed us that additional data would be needed to support 510(k) clearance for the product. We have engaged with the FDA and have obtained feedback on a proposed study design to generate such data to support a resubmission of our application for 510(k) clearance.
Band– The Owlet Band is under development and anticipated to be designed for pregnant women between 24 to 40 weeks of gestation to offer a deeper connection and reassurance to pregnant women at home. Expectant parents will be able to view collected data in the Owlet pregnancy application as well as hear their baby’s heartbeat. We anticipate that the Owlet Band may require marketing authorization from the FDA prior to commercialization.
Connected Ecosystem Pipeline
We plan to complement our monitoring pipeline with our connected ecosystem pipeline to create a more unified digital parenting experience. We believe our strong brand and platform provide a strong position to develop adjacent products. For example, we plan to develop the Smart Crib, which would connect with our Sock Monitor offerings to understand a baby’s sleep cycles and would utilize automated motion technology to lull babies back to sleep when they wake up. As we develop additional products, we believe parents will increasingly rely on our connected ecosystem for digital parenting solutions.
Platform Pipeline
As we expand our connected ecosystem, we will continue to develop our platform products and services in order to bring additional solutions into the home. Our long-term goal is to integrate with leading telehealth providers who can share infant sleep and health data with medical professionals. We believe obtaining FDA marketing authorization for the notification features identified in the Warning Letter, and similar authorizations and certifications (as applicable) from foreign authorities and notified bodies, and our Owlet OTC Smart Sock, Owlet BabySat, and Owlet Band products will allow us to develop a native Owlet telehealth platform and directly engage medical professionals to provide an end-to-end digital healthcare solution for our customers. To further our commitment to parents and their children from conception to kindergarten, we plan to continue to explore new potential products and services that make parents’ and their children’s lives less stressful and more meaningful.
7


Our Growth Strategies
We are excited to expand the Company’s footprint, and we plan to implement the following strategies to accelerate our growth:
Leverage Brand Awareness & Grow Distribution to Increase Penetration. We intend to continue our efforts to become one of the most recognizable brand names in the digital parenting category. We believe becoming a recognizable brand helps our offerings stand out in a highly fragmented market of legacy companies lacking a category leader. We see ample room for growth as our existing product suite is in the beginning phase of market penetration. We plan to leverage our paid and organic marketing efforts across social media, display advertising, and email marketing to boost top-of-mind awareness and acquire new users at a sustainable cost.
Adding New Data-Driven Products to Expand the Digital Parenting Ecosystem. We are building a platform with the goal to be parents’ go-to brand in the areas of sleep, safety, health and well-being, from conception through kindergarten. Our goal is to continue adding products and services at a regular cadence in order to create a digital parenting ecosystem that works together to create a holistic experience for families and leverages the strength of our brand. We believe our robust pipeline of hardware product candidates, including the Owlet Smart Crib, as well as the development of our software and services, will provide us additional opportunities to sell new products to our existing users.
Invest in Clinical Research and Pursue FDA Marketing Authorization to Potentially Open the Door to Coverage and Reimbursement and Telehealth. We plan to grow into the medical and telehealth markets by pursuing FDA marketing authorization of certain products and continuing to invest in clinical research, as exemplified by our recent tachyarrhythmia study published in The Journal of Pediatrics. If we are successful in obtaining marketing authorization from the FDA for the Owlet BabySat, we believe we could build further credibility for our platform with the medical community and help open new medical channels and markets. We are developing the Owlet OTC Smart Sock for healthy babies with no underlying medical conditions. We believe that FDA marketing authorization for either of these products would help open the door to expanded services.
Leverage Brand to Expand into New Markets. While our existing primary market is the U.S., our goal is to continue to use our operating knowledge to successfully and meaningfully expand into new countries. We plan to capitalize on our expansive and growing ecosystem of offerings and acquire additional market share globally, with heightened focus on Europe, Asia, and Latin America. Initially, we expect to utilize online channels and retail channels to facilitate geographic expansion. As our retail penetration increases and brand awareness grows outside of the U.S., we intend to further leverage retail channels and locations to ensure efficient and strategic global customer acquisition.
Growth through Acquisitions. We intend to further deepen our position as a leader in the digital parenting category by opportunistically pursuing acquisitions of companies, platforms, and technologies that would be accretive and complementary to our existing ecosystem and vision. We plan to seek opportunities, particularly healthcare and software-based services, to expand our technological capabilities and product and service offerings to provide incremental value to our users. We believe our digital parenting ecosystem provides a strong foundation to integrate prospective targets and consolidate a fragmented field of products, further bolstering our market reach and growth trajectory.
Our Users
The majority of our users are millennials, a brand-conscious and technological savvy generation, with annual income of $50,000 or more. These parents are more likely to be early technology adopters and have a high affinity towards actionable insight to care for their children. This is evidenced by the one-and-a-half million downloads of the Owlet applications and increasing social media engagement across our multiple platforms.

Research and Development
We are committed to ongoing research and development to create new products and improve the design, operation, and quality of existing products. Our research and development organization includes individuals with expertise in fields including engineering, product design, clinical science, consumer electronics, and embedded software design. Our technical capabilities and commitment to innovation have allowed us to deliver significant product enhancements on a rapid development timeline, which we believe has helped us to support a compelling new product roadmap. From designing innovative and groundbreaking products to employing sophisticated software with proprietary algorithms and backend support, we believe we have built a strong competitive moat and early-mover advantage over potential competition in the connected nursery field. We have a vast infant data set which leads to stronger insights and allows us to develop better products and services, which we believe in turn leads to happier users and drives product purchases.
8


Our current research and development efforts are focused on developing an expanded ecosystem, with a wider range of products and services for the connected nursery, including telehealth and medical devices that can be utilized by parents from conception to kindergarten.

Competition
Historically, baby monitors and nursery products have been fragmented product categories with multiple players and limited brand loyalty, and have integrated limited amounts of technology and data into the caregiver’s experience. However, we expect the industry in which we operate will continue to evolve and may be significantly affected by new product introductions and other market activities of industry participants. Certain potential competitors have substantially greater capital resources, larger product portfolios, larger user bases, larger sales forces and greater geographic presence, and have built relationships with retailers and distributors that may be more effective than ours. Our products and services face additional competition from companies developing products and services for use with third-party monitoring systems, as well as from companies that currently market similar products and services of their own, and may face further pressure from technology companies that have not historically operated in our industry.
Continuing technological advances and new product introductions within the home-use childcare electronics and service industry place our products and services at risk of obsolescence. Our long-term success depends upon the development and successful commercialization of new products and services, new or improved technologies and additional applications for our existing technologies, including products or applications that may be subject to the oversight of the FDA or comparable foreign regulatory authorities and could require marketing authorization by the FDA or similar approval, clearance, authorization or certification from comparable foreign regulatory authorities. The research and development process is time-consuming and costly and may not result in products and services or applications that we can successfully commercialize.
We believe that the primary competitive factors in our market are: 
product quality and performance, including the size, quality, comfort, battery life, reliability, connectivity of the device to the application and/or monitor, and accuracy of algorithm, with regards to both false negatives and false positives; 
customer purchasing experience;
pricing;
product support and service;
effective marketing and education;
brand recognition;
breadth and depth of offerings;
greater market penetration;
technological innovation, product enhancements and speed of innovation; and
sales and distribution capabilities.
We believe our ability to continue to compete effectively in our industry will also depend in part on our ability to respond more quickly and effectively than our peers to new or changing opportunities, technologies, regulatory standards or customer requirements. We anticipate that we will face increased competition in the future as existing companies and competitors develop new or improved products and distribution strategies and as new companies enter the market with new technologies and distribution strategies. Increased competition in the future could adversely affect our revenue, revenue growth rate, margins and market share.
Manufacturing
We rely on several third-party suppliers for single source components used in our devices, including the WiFi chips, microcontrollers, batteries, accelerometers, temperature sensors, plastics and circuit boards.
We follow strict quality guidelines, including a detailed risk-based audit plan following our ISO 9001 quality policy that dictates how often and to what degree we audit our suppliers. We check all quality, regulatory, and safety standards for products that our contract manufacturers make. We deploy a robust manufacturer and supplier selection process including site audits, tooling design and setup quotes, open book pricing, quality specifications, and vendor guides. The Owlet Smart Sock and Owlet Dream Sock are currently manufactured at ISO 13485 certified manufacturing sites. We received ISO 13485 and MDSAP certifications, as we work to implement the requirements
9


applicable to medical device manufacturer quality systems. We believe that third-party facilities will be adequate to meet our current and anticipated manufacturing needs. We do not currently plan to manufacture our products or any related components ourselves.
Manufacturing Services Agreement with Benchmark Electronics
In October 2017, we entered into a manufacturing services agreement with Benchmark Electronics, Inc. (“Benchmark”), pursuant to which Benchmark provides us certain manufacturing and related services for the production of our Sock Monitoring offerings out of its facilities in Thailand, including procuring materials and assembling and testing finished products.
The initial term of the agreement expired in October 2018, but the term of the agreement automatically extends for additional one-year periods until either we or Benchmark provide notice of non-renewal at least 90 days prior to the end of the then-current term or extension. Among other things, either party may terminate the agreement for convenience upon 90-day notice, in the case of Owlet, or 180 day notice, in the case of Benchmark, to the other party. Either party may also terminate the agreement under certain other customary conditions, including for uncured breaches of the agreement or if the other party if the other party materials breaches the agreement or in the event of the other party’s insolvency.
In connection with the services provided under the agreement, we have agreed to indemnify Benchmark against certain claims, including infringement of third-party intellectual property rights and noncompliance of our products with safety or other regulations. We are also entitled to customary indemnification rights, subject to certain caps.
Manufacturing Services Agreement with Aoni
In June 2018, we entered into a manufacturing and supply agreement with Shenzhen Aoni Electronic Co., Ltd (“Aoni”), pursuant to which Aoni provides certain manufacturing and related services for the production of our Owlet Cam product, including procuring materials and assembling and packaging finished products.
Following the expiration of the initial term of the agreement in June 2019, we extended the agreement through June 2022. We have the right to terminate the agreement, without cause, upon six months’ prior written notice to Aoni. Additionally, either party may terminate the agreement under certain other customary conditions, including for uncured breaches of the agreement or in the event of the other party’s insolvency.
In connection with the services provided under the agreement, Aoni has agreed to indemnify us against certain claims and liabilities, including claims arising in connection with product defects, breach of the agreement, negligence and violations of applicable law.
Government Regulation
Certain of our products and our operations could be subject to extensive regulation by the U.S. Food and Drug Administration, or FDA, and other federal and state authorities in the U.S., as well as comparable authorities in foreign jurisdictions. For example, certain of our products may be subject to regulation as medical devices in the U.S. under the FDCA, as implemented and enforced by the FDA.
U.S. Regulation
The FDA regulates the development, design, non-clinical and clinical research, manufacturing, safety, efficacy, labeling, packaging, storage, installation, servicing, recordkeeping, premarket clearance or approval, adverse event reporting, advertising, promotion, marketing and distribution, and import and export of medical devices to ensure that medical devices distributed domestically are safe and effective for their intended uses and otherwise meet the requirements of the FDCA.
FDA Premarket Clearance and Approval Requirements
Unless an exemption applies, each medical device commercially distributed in the U.S. requires either FDA clearance of a premarket notification submitted under Section 510(k) of the FDCA, or approval of a premarket approval application, or PMA. Under the FDCA, medical devices are classified into one of three classes—Class I, Class II or Class III—depending on the degree of risk associated with each medical device and the extent of manufacturer and regulatory control needed to ensure its safety and effectiveness. Class I includes devices with the lowest risk to the patient and are those for which safety and effectiveness can be assured by adherence to the FDA’s General Controls for medical devices, which include compliance with the applicable portions of the Quality System Regulation, or QSR, facility registration and product listing, reporting of adverse medical events, and truthful and non-misleading labeling, advertising, and promotional materials. Class II devices are subject to the FDA’s General
10


Controls, and special controls as deemed necessary by the FDA to ensure the safety and effectiveness of the device. These special controls can include performance standards, post-market surveillance, patient registries and FDA guidance documents.
While most Class I devices are exempt from the 510(k) premarket notification requirement, manufacturers of most Class II devices are required to submit to the FDA a premarket notification under Section 510(k) of the FDCA requesting permission to commercially distribute the device. The FDA’s permission to commercially distribute a device subject to a 510(k) premarket notification is generally known as 510(k) clearance. Devices deemed by the FDA to pose the greatest risks, such as life sustaining, life supporting or some implantable devices, or devices that have a new intended use, or use advanced technology that is not substantially equivalent to that of a legally marketed device, are placed in Class III, requiring approval of a PMA. Some pre-amendment devices are unclassified, but are subject to FDA’s premarket notification and clearance process in order to be commercially distributed.
510(k) Clearance Marketing Pathway
To obtain 510(k) clearance, we must submit to the FDA a premarket notification submission demonstrating that the proposed device is “substantially equivalent” to a legally marketed predicate device. A predicate device is a legally marketed device that is not subject to premarket approval, i.e., a device that was legally marketed prior to May 28, 1976 (pre-amendments device) and for which a PMA is not required, a device that has been reclassified from Class III to Class II or I, or a device that was found substantially equivalent through the 510(k) process. The FDA’s 510(k) clearance process usually takes from three to twelve months, but may take longer. The FDA may require additional information, including clinical data, to make a determination regarding substantial equivalence. In addition, FDA collects user fees for certain medical device submissions and annual fees and for medical device establishments.
If the FDA agrees that the device is substantially equivalent to a predicate device currently on the market, it will grant 510(k) clearance to commercially market the device. If the FDA determines that the device is “not substantially equivalent” to a previously cleared device, the device is automatically designated as a Class III device. The device sponsor must then fulfill more rigorous PMA requirements, or can request a risk-based classification determination for the device in accordance with the “de novo” process, which is a route to market for novel medical devices that are low to moderate risk and are not substantially equivalent to a predicate device.
After a device receives 510(k) clearance, any modification that could significantly affect its safety or effectiveness, or that would constitute a major change or modification in its intended use, will require a new 510(k) clearance or, depending on the modification, PMA approval. The FDA requires each manufacturer to determine whether the proposed change requires submission of a 510(k) or a PMA in the first instance, but the FDA can review any such decision and disagree with a manufacturer’s determination. If the FDA disagrees with a manufacturer’s determination, the FDA can require the manufacturer to cease marketing and/or request the recall of the modified device until such marketing authorization has been granted. Also, in these circumstances, the manufacturer may be subject to significant regulatory fines or penalties.
Over the last several years, the FDA has proposed reforms to its 510(k) clearance process, and such proposals could include increased requirements for clinical data and a longer review period, or could make it more difficult for manufacturers to utilize the 510(k) clearance process for their products. For example, in November 2018, FDA officials announced steps that the FDA intended to take to modernize the 510(k) pathway. Among other things, the FDA announced that it planned to develop proposals to drive manufacturers utilizing the 510(k) pathway toward the use of newer predicates. These proposals included plans to potentially sunset certain older devices that were used as predicates under the 510(k) clearance pathway, and to potentially publish a list of devices that have been cleared on the basis of demonstrated substantial equivalence to predicate devices that are more than 10 years old. These proposals have not yet been finalized or adopted, although the FDA may work with Congress to implement such proposals through legislation.
More recently, in September 2019, the FDA issued revised final guidance describing an optional “safety and performance based” premarket review pathway for manufacturers of “certain, well-understood device types” to demonstrate substantial equivalence under the 510(k) clearance pathway by showing that such device meets objective safety and performance criteria established by the FDA, thereby obviating the need for manufacturers to compare the safety and performance of their medical devices to specific predicate devices in the clearance process. The FDA has developed and maintains a list device types appropriate for the “safety and performance based” pathway and continues to develop product-specific guidance documents that identify the performance criteria for each such device type, as well as the testing methods recommended in the guidance documents, where feasible. For fiscal year 2022, the standard user fee for a 510(k) premarket notification submission is $0.01 million.
11


PMA Approval Pathway
Class III devices require PMA approval before they can be marketed, although some pre-amendment Class III devices for which FDA has not yet required a PMA are cleared through the 510(k) process. The PMA process is more demanding than the 510(k) premarket notification process. In a PMA, the manufacturer must demonstrate that the device is safe and effective, and the PMA must be supported by extensive data, including data from preclinical studies and human clinical trials. The PMA must also contain a full description of the device and its components, a full description of the methods, facilities, and controls used for manufacturing, and proposed labeling. Following receipt of a PMA, the FDA determines whether the application is sufficiently complete to permit a substantive review. If the FDA accepts the application for review, it has 180 days under the FDCA to complete its review of a PMA, although in practice, the FDA’s review often takes significantly longer, and can take up to several years. An advisory panel of experts from outside the FDA may be convened to review and evaluate the application and provide recommendations to the FDA as to the approvability of the device. The FDA may or may not accept the panel’s recommendation. In addition, the FDA will generally conduct a pre-approval inspection of the applicant or its third-party manufacturers’ or suppliers’ manufacturing facility or facilities to ensure compliance with the QSR. PMA applications are also subject to the payment of user fees, which for fiscal year 2021 includes a standard application fee of $0.4 million.
The FDA will approve the new device for commercial distribution if it determines that the data and information in the PMA constitute valid scientific evidence and that there is reasonable assurance that the device is safe and effective for its intended use(s). The FDA may approve a PMA with post-approval conditions intended to ensure the safety and effectiveness of the device, including, among other things, restrictions on labeling, promotion, sale and distribution, and collection of long-term follow-up data from patients in the clinical study that supported PMA approval or requirements to conduct additional clinical studies post-approval. The FDA may condition PMA approval on some form of post-market surveillance when deemed necessary to protect the public health or to provide additional safety and efficacy data for the device in a larger population or for a longer period of use. In such cases, the manufacturer might be required to follow certain patient groups for a number of years and to make periodic reports to the FDA on the clinical status of those patients. Failure to comply with the conditions of approval can result in material adverse enforcement action, including withdrawal of the approval.
Certain changes to an approved device, such as changes in manufacturing facilities, methods, or quality control procedures, or changes in the design performance specifications, which affect the safety or effectiveness of the device, require submission of a PMA supplement. PMA supplements often require submission of the same type of information as a PMA, except that the supplement is limited to information needed to support any changes from the device covered by the original PMA and may not require as extensive clinical data or the convening of an advisory panel. Certain other changes to an approved device require the submission of a new PMA, such as when the design change causes a different intended use, mode of operation, and technical basis of operation, or when the design change is so significant that a new generation of the device will be developed, and the data that were submitted with the original PMA are not applicable for the change in demonstrating a reasonable assurance of safety and effectiveness.
De Novo Classification
Medical device types that the FDA has not previously classified as Class I, II, or III are automatically classified into Class III regardless of the level of risk they pose. The Food and Drug Administration Modernization Act of 1997 established a new route to market for low to moderate risk medical devices that are automatically placed into Class III due to the absence of a predicate device, called the “Request for Evaluation of Automatic Class III Designation,” or the de novo classification procedure. This procedure allows a manufacturer whose novel device is automatically classified into Class III to request down-classification of its medical device into Class I or Class II on the basis that the device presents low or moderate risk, rather than requiring the submission and approval of a PMA application. Prior to the enactment of the Food and Drug Administration Safety and Innovation Act, or FDASIA, in July 2012, a medical device could only be eligible for de novo classification if the manufacturer first submitted a 510(k) premarket notification and received a determination from the FDA that the device was not substantially equivalent. FDASIA streamlined the de novo classification pathway by permitting manufacturers to request de novo classification directly without first submitting a 510(k) premarket notification to the FDA and receiving a not substantially equivalent determination.
Clinical Trials
Clinical trials are almost always required to support a PMA and de novo classification and are sometimes required to support a 510(k) submission. All clinical investigations of devices to determine safety and effectiveness must be conducted in accordance with the FDA’s investigational device exemption, or IDE, regulations which govern investigational device labeling, prohibit promotion of the investigational device, and specify an array of recordkeeping, reporting and monitoring responsibilities of study sponsors and study investigators. If the device
12


presents a “significant risk” to human health, as defined by the FDA, the FDA requires the device sponsor to submit an IDE application to the FDA, which must become effective prior to commencing human clinical trials. If the device under evaluation does not present a significant risk to human health, then the device sponsor is not required to submit an IDE application to the FDA before initiating human clinical trials, but must still comply with abbreviated IDE requirements when conducting such trials. A significant risk device is one that presents a potential for serious risk to the health, safety or welfare of a patient and either is implanted, used in supporting or sustaining human life, substantially important in diagnosing, curing, mitigating or treating disease or otherwise preventing impairment of human health, or otherwise presents a potential for serious risk to a subject. An IDE application must be supported by appropriate data, such as animal and laboratory test results, showing that it is safe to test the device in humans and that the testing protocol is scientifically sound. The IDE will automatically become effective 30 days after receipt by the FDA unless the FDA notifies the company that the investigation may not begin. If the FDA determines that there are deficiencies or other concerns with an IDE for which it requires modification, the FDA may permit a clinical trial to proceed under a conditional approval.
Regardless of the degree of risk presented by the medical device, clinical studies must be approved by, and conducted under the oversight of, an Institutional Review Board, or IRB, for each clinical site. The IRB is responsible for the initial and continuing review of the IDE, and may impose additional requirements for the conduct of the study. If an IDE application is approved by the FDA and one or more IRBs, human clinical trials may begin at a specific number of investigational sites with a specific number of patients, as approved by the FDA. If the device presents a non-significant risk to the patient, a sponsor may begin the clinical trial after obtaining approval for the trial by one or more IRBs without separate approval from the FDA, but must still follow abbreviated IDE requirements, such as monitoring the investigation, ensuring that the investigators obtain informed consent, and complying with labeling and record-keeping requirements. In some cases, an IDE supplement must be submitted to, and approved by, the FDA before a sponsor or investigator may make a change to the investigational plan that may affect its scientific soundness, study plan or the rights, safety or welfare of human subjects.
During a study, the sponsor is required to comply with the applicable FDA requirements, including, for example, trial monitoring, selecting clinical investigators and providing them with the investigational plan, ensuring IRB review, adverse event reporting, record keeping and prohibitions on the promotion of investigational devices or on making safety or effectiveness claims for them. The clinical investigators in the clinical study are also subject to FDA’s regulations and must obtain patient informed consent, rigorously follow the investigational plan and study protocol, control the disposition of the investigational device, and comply with all reporting and recordkeeping requirements. Additionally, after a trial begins, we, the FDA or the IRB could suspend or terminate a clinical trial at any time for various reasons, including a belief that the risks to study subjects outweigh the anticipated benefits.
Post-market Regulation
After a device is cleared or approved for marketing, numerous and pervasive regulatory requirements continue to apply. These include:
establishment registration and device listing with the FDA;
QSR requirements, which require manufacturers, including third-party manufacturers, to follow stringent design, testing, control, documentation and other quality assurance procedures during all aspects of the design and manufacturing process;
labeling regulations and FDA prohibitions against the promotion of investigational products, or the promotion of “off-label” uses of cleared or approved products;
requirements related to promotional activities;
clearance or approval of product modifications to 510(k)-cleared devices that could significantly affect safety or effectiveness or that would constitute a major change in intended use of one of our cleared devices, or approval of certain modifications to PMA-approved devices;
medical device reporting regulations, which require that a manufacturer report to the FDA if a device it markets may have caused or contributed to a death or serious injury, or has malfunctioned and the device or a similar device that it markets would be likely to cause or contribute to a death or serious injury, if the malfunction were to recur;
correction, removal and recall reporting regulations, which require that manufacturers report to the FDA field corrections and product recalls or removals if undertaken to reduce a risk to health posed by the device or to remedy a violation of the FDCA that may present a risk to health;
the FDA’s recall authority, whereby the agency can order device manufacturers to recall from the market a product that is in violation of governing laws and regulations; and
post-market surveillance activities and regulations, which apply when deemed by the FDA to be necessary to protect the public health or to provide additional safety and effectiveness data for the device.
13


Manufacturing processes for medical devices are required to comply with the applicable portions of the QSR, which cover the methods and the facilities and controls for the design, manufacture, testing, production, processes, controls, quality assurance, labeling, packaging, distribution, installation and servicing of finished devices intended for human use. The QSR also requires, among other things, maintenance of a device master file, device history file, and complaint files. As a manufacturer, we are subject to periodic scheduled and unscheduled inspections by the FDA. Failure to maintain compliance with the QSR requirements could result in the shut-down of, or restrictions on, manufacturing operations and the recall or seizure of marketed products. The discovery of previously unknown problems with any marketed products, including unanticipated adverse events or adverse events of increasing severity or frequency, whether resulting from the use of the device within the scope of its clearance or approval, or off-label by a physician in the practice of medicine, could result in restrictions on the device, including the removal of the product from the market or voluntary or mandatory device recalls.
The FDA has broad regulatory compliance and enforcement powers. If the FDA determines that a manufacturer has failed to comply with applicable regulatory requirements, it can take a variety of compliance or enforcement actions, which may result in any of the following sanctions:
warning letters, untitled letters, fines, injunctions, consent decrees and civil penalties;
recalls, withdrawals, or administrative detention or seizure of our products;
operating restrictions or partial suspension or total shutdown of production;
refusing or delaying requests for 510(k) clearance or PMA approvals of new products or modified products;
withdrawing 510(k) clearances or PMA approvals that have already been granted;
refusal to grant export approvals for our products; or
criminal prosecution.
Low Risk General Wellness Products
The FDA has established a compliance policy for certain products that may fall within the definition of a medical device, but that are intended for only “general wellness use” and present a low risk to the safety of users and other persons. The FDA defines a “general wellness use” to be (i) an intended use that relates to maintaining or encouraging a general state of health or a healthy activity, or (ii) an intended use that relates the role of healthy lifestyle with helping to reduce the risk or impact of certain chronic diseases or conditions and where it is well understood and accepted that healthy lifestyle choices may play an important role in health outcomes for the disease or condition. For example, the FDA identifies sleep management – such as a product intended to track sleep trends – as an intended use of a product that falls within a general wellness use, provided that the product claims do not make reference to any diseases or conditions. Specifically, the FDA has issued guidance explaining that for such low-risk products, FDA does not intend to examine whether the product constitutes a medical device, and if the product is a medical device, whether the product complies with the premarket review and post-market regulatory requirements of the FDCA. As such, if a medical device falls within the definition of a “low risk general wellness product,” the product may nevertheless be subject to enforcement discretion under the FDA’s compliance policy for such products, meaning that the FDA will not enforce its medical device authorities with respect to that product.
Foreign Government Regulation
In addition to U.S. regulations, we are subject to a variety of foreign government regulations applicable to general consumer products and medical devices.
Regulation of General Consumer Products in the European Union
In the European Union ("EU"), consumer products must comply with the General Product Safety Directive No 2001/95/EC. This Directive covers all products intended for consumers or likely to be used by consumers, placed onto the EU market, unless a specific product safety regulation applies. The General Product Safety Directive provides safety and conformity requirements as well as post-market surveillance obligations for manufacturers and importers. Manufacturers must undertake and document a conformity assessment that covers the risks and risk categories associated with the product. The recommended method of undertaking such an assessment is through the application of voluntary European Harmonized Standards, but other options are available, such as using European Commission guidelines and using product safety codes of good practice. The required conformity assessment consists of a self-assessment with no requirement to involve a third party. Manufacturers also have the obligation to report to the national competent authorities of the different EU member states any risks to the consumer that are incompatible with the general safety requirements. The Directive further imposes other obligations such as collecting information related to use of products after they have been made available to consumers.
14


Additional regulations may apply to our products and impose further requirements, including the possible application of EU Regulation No 1007/2011 on textile products, which imposes specific labeling and marking requirements. In addition, we may also need to comply with requirements set forth by RoHs Directive No 2011/65/EU, which imposes specific restrictions on the use of hazardous substances in electrical and electronic equipment, and/or the Registration, Evaluation, Authorization, and Restriction of Chemicals (“REACH”) Regulation (EU) No 1907/2006, which restricts substances of very high concern and imposes substance registration requirements.
Contrary to EU regulations (which are directly applicable in all EU member states), directives must be implemented by individual member states and may be applied in a way that is not always uniform across the EU. In addition, member states determine the penalties applicable to infringements of the national provisions adopted pursuant to the General Product Safety Directive and other directives and shall take all measures necessary to ensure that they are implemented. Additional national requirements may be applicable to our products, as well.
The advertising and promotion of consumer products is subject to EU directives concerning misleading and comparative advertising and unfair commercial practices and specific EU member state legislation governing the advertising and promotion of these products.
The aforementioned EU rules are generally applicable in the European Economic Area (EEA) which consists of the 27 EU member states plus Norway, Liechtenstein and Iceland.

Regulation of Medical Devices in the European Union

The EU has adopted specific directives and regulations regulating the design, manufacture, clinical investigations, conformity assessment, labeling and adverse event reporting for medical devices. Until May 25, 2021, medical devices were regulated by the Council Directive 93/42/EEC (the EU Medical Devices Directive), which has been repealed and replaced by Regulation (EU) No 2017/745 (the EU Medical Devices Regulation). Unlike the EU Medical Devices Directive, the EU Medical Devices Regulation is directly applicable in all EU member states without the need for member states to implement into national law.

In the EU, there is currently no premarket government review of medical devices. However, all medical devices placed on the market in the EU must meet the relevant general safety and performance requirements laid down in Annex I to the EU Medical Devices Regulation including the requirement that a medical device must be designed and manufactured in such a way that, during normal conditions of use, it is suitable for its intended purpose. The medical device must be safe and effective and must not compromise the clinical condition or safety of patients, or the safety and health of users and – where applicable – other persons, provided that any risks which may be associated with their use constitute acceptable risks when weighed against the benefits to the patient and are compatible with a high level of protection of health and safety, taking into account the generally acknowledged state of the art. The European Commission has adopted various standards applicable to medical devices. These include standards governing common requirements, such as sterilization and safety of medical electrical equipment and product standards for certain types of medical devices. There are also harmonized standards relating to design and manufacture. While not mandatory, compliance with these standards is viewed as the easiest way to satisfy the general safety and performance requirements as a practical matter as it creates a rebuttable presumption that the device satisfies that general safety and performance requirement.

Compliance with the general safety and performance requirements of the EU Medical Devices Regulation is a prerequisite for European Conformity Marking (CE mark) without which medical devices cannot be marketed or sold in the EU. To demonstrate compliance with the general safety and performance requirements laid down in Annex I to the EU Medical Devices Regulation, medical device manufacturers must undergo a conformity assessment procedure, which varies according to the type of medical device and its (risk) classification. As a general rule, demonstration of conformity of medical devices and their manufacturers with the general safety and performance requirements must be based, among other things, on the evaluation of clinical data supporting the safety and performance of the products during normal conditions of use. Specifically, a manufacturer must demonstrate that the device achieves its intended performance during normal conditions of use, that the known and foreseeable risks, and any adverse events, are minimized and acceptable when weighed against the benefits of its intended performance, and that any claims made about the performance and safety of the device are supported by suitable evidence. Except for low-risk medical devices (Class I), where the manufacturer can self-assess the conformity of its products with the general safety and performance requirements (except for any parts which relate to sterility or metrology or reuse aspects), a conformity assessment procedure requires the intervention of a notified body. Notified bodies are independent organizations designated by EU member states to assess the conformity of devices before being placed on the market. A notified body would typically audit and examine a product’s technical dossiers and the manufacturers’ quality system (notified body must presume that quality systems which implement the relevant harmonized standards – which is ISO 13485:2016 for Medical Devices Quality Management Systems – conform to these requirements). If satisfied that the relevant product conforms to the general safety and performance requirements, the notified body issues a certificate of conformity, which the manufacturer uses as a basis for its own
15


declaration of conformity. The manufacturer may then apply the CE mark to the device, which allows the device to be placed on the market throughout the EU.

Throughout the term of the certificate of conformity, the manufacturer will be subject to periodic surveillance audits to verify continued compliance with the applicable requirements. In particular, there will be a new audit by the notified body before it will renew the relevant certificate(s).

The EU Medical Devices Regulation requires that before placing a device, other than a custom-made device, on the market, manufacturers (as well as other economic operators such as authorized representatives and importers) must register by submitting identification information to the European Database for Medical Devices ("EUDAMED"), unless they have already registered. The information to be submitted by manufacturers (and authorized representatives) also includes the name, address and contact details of the person or persons responsible for regulatory compliance. The regulation also requires that before placing a device, other than a custom-made device, on the market, manufacturers must assign a unique identifier to the device and provide it along with other core data to the unique device identifier (UDI) database. These new requirements aim at ensuring better identification and traceability of the devices. Each device – and as applicable, each package – will have a UDI composed of two parts: a device identifier (UDI-DI) specific to a device, and a production identifier (UDI-PI) to identify the unit producing the device. Manufacturers are also notably responsible for entering the necessary data on EUDAMED, which includes the UDI database, and for keeping it up to date. The obligations for registration in EUDAMED will become applicable at a later date (as EUDAMED is not yet fully functional). Until EUDAMED is fully functional, the corresponding provisions of the EU Medical Devices Directive continue to apply for the purpose of meeting the obligations laid down in the provisions regarding exchange of information, including, and in particular, information regarding registration of devices and economic operators.

All manufacturers placing medical devices into the market in the EU must comply with the EU medical device vigilance system which has been reinforced by the EU Medical Devices Regulation. Under this system, serious incidents and Field Safety Corrective Actions (FSCAs) must be reported to the relevant authorities of the EU member states. These reports will have to be submitted through EUDAMED – once functional – and aim to ensure that, in addition to reporting to the relevant authorities of the EU member states, other actors such as the economic operators in the supply chain will also be informed. Until EUDAMED is fully functional, the corresponding provisions of the EU Medical Devices Directive continue to apply. A serious incident is defined as any malfunction or deterioration in the characteristics or performance of a device made available on the market, including use-error due to ergonomic features, as well as any inadequacy in the information supplied by the manufacturer and any undesirable side-effect, which, directly or indirectly, might have led or might lead to the death of a patient or user or of other persons or to a temporary or permanent serious deterioration of a patient’s, user’s or other person’s state of health or a serious public health threat. Manufacturers are required to take FSCAs defined as any corrective action for technical or medical reasons to prevent or reduce a risk of a serious incident associated with the use of a medical device that is made available on the market. An FSCA may include the recall, modification, exchange, destruction or retrofitting of the device. FSCAs must be communicated by the manufacturer or its legal representative to its customers and/or to the end users of the device through Field Safety Notices. For similar serious incidents that occur with the same device or device type and for which the root cause has been identified or a FSCA implemented or where the incidents are common and well documented, manufacturers may provide periodic summary reports instead of individual serious incident reports.

The advertising and promotion of medical devices is subject to some general principles set forth in EU legislation. According to the EU Medical Devices Regulation, only devices that are CE marked may be marketed and advertised in the EU in accordance with their intended purpose. Directive 2006/114/EC concerning misleading and comparative advertising and Directive 2005/29/EC on unfair commercial practices, while not specific to the advertising of medical devices, also apply to the advertising thereof and contain general rules, for example, requiring that advertisements are evidenced, balanced and not misleading. Specific requirements are defined at a national level. EU member states’ laws related to the advertising and promotion of medical devices, which vary between jurisdictions, may limit or restrict the advertising and promotion of products to the general public and may impose limitations on promotional activities with healthcare professionals.

Many EU member states have adopted specific anti-gift statutes that further limit commercial practices for medical devices, in particular vis-à-vis healthcare professionals and organizations. Additionally, there has been a recent trend of increased regulation of payments and transfers of value provided to healthcare professionals or entities and many EU member states have adopted national “Sunshine Acts” which impose reporting and transparency requirements (often on an annual basis), similar to the requirements in the U.S., on medical device manufacturers. Certain countries also mandate implementation of commercial compliance programs. The aforementioned EU rules are generally applicable in the EEA.

16


Brexit and Regulation of Medical Devices in the United Kingdom

Since January 1, 2021, the Medicines and Healthcare Products Regulatory Agency (MHRA) has become the sovereign regulatory authority responsible for Great Britain (i.e. England, Wales and Scotland) medical device market according to the requirements provided in the Medical Devices Regulations 2002 (SI 2002 No 618, as amended) that sought to give effect to the three pre-existing EU directives governing active implantable medical devices, general medical devices and in vitro diagnostic medical devices whereas Northern Ireland continues to be governed by EU rules according to the Northern Ireland Protocol. Following the end of the Brexit transitional period on January 1, 2021, new regulations require medical devices to be registered with the MHRA (but manufacturers were given a grace period of four to 12 months to comply with the new registration process) before being placed on Great Britain market. The MHRA only registers devices where the manufacturer or their United Kingdom (UK) Responsible Person has a registered place of business in the UK. Manufacturers based outside the UK need to appoint a UK Responsible Person that has a registered place of business in the UK to register devices with the MHRA in line with the grace periods. Additionally, UK-based notified bodies, which were designated to independently assess the conformity of certain products requiring CE marking before being placed on the EU market, are now no longer established in the EU, and accordingly, the conformity assessments carried out by such UK bodies, including those assessments carried out prior to January 1, 2021, are no longer valid for the EU compliance regime. Manufacturers whose products currently rely on third-party conformity assessments carried out by UK notified bodies now require new conformity assessments to be carried out by EU-based notified bodies in order to ensure continuing compliance with the EU regime and to continue to place those products on the EU market. By July 1, 2023, in Great Britain, all medical devices will require a UKCA (UK Conformity Assessed) mark but CE marks issued by EU notified bodies will remain valid until this time. Manufacturers may choose to use the UKCA mark on a voluntary basis until June 30, 2023. However, UKCA marking will not be recognized in the EU. The rules for placing medical devices on the market in Northern Ireland, which is part of the UK, differ from those in the rest of the UK. Compliance with this legislation is a prerequisite to be able to affix the UKCA mark to our products, without which they cannot be sold or marketed in Great Britain.

An MHRA public consultation was opened until the end of November 2021 on the post-Brexit regulatory framework for medical devices and diagnostics. MHRA seeks to amend the UK Medical Devices Regulations 2002 (which are based on EU legislation, primarily the EU Medical Devices Directive, the EU Active Implantable Medical Devices Directive and the EU In Vitro Diagnostic Medical Devices Directive), in particular to create a new access pathways to support innovation, create an innovative framework for regulating software and artificial intelligence as medical devices, reform in vitro diagnostic medical devices regulation, and foster sustainability through the reuse and remanufacture of medical devices. The regime is expected to come into force in July 2023, coinciding with the end of the acceptance period for EU CE marks in Great Britain, subject to appropriate transitional arrangements. The consultation indicated that the MHRA will publish guidance in relation to the changes to the regulatory framework and may rely more heavily on guidance to add flexibility to the regime.

In addition, the trade deal between the UK and the EU generally provides for cooperation and exchange of information between the parties in the areas of product safety and compliance, including market surveillance, enforcement activities and measures, standardization-related activities, exchanges of officials, and coordinated product recalls. As such, processes for compliance and reporting should reflect requirements from regulatory authorities.

Under the terms of the Northern Ireland Protocol, Northern Ireland follows EU rules on medical devices and devices marketed in Northern Ireland require assessment according to the EU regulatory regime. Such assessment may be conducted by an EU notified body, in which case a CE mark is required before placing the device on the market in the EU or Northern Ireland. Alternatively, if a UK notified body conducts such assessment, a ‘UKNI’ mark applied and the device may only be placed on the market in Northern Ireland and not the EU.

Other Foreign Regulations

Similarly, we are subject to regulations and product registration requirements in many foreign countries in which we may sell our products, including in the areas of:
design, development, manufacturing, and testing;
product standards;
product safety;
product safety reporting;
marketing, sales, and distribution;
packaging and storage requirements;
labeling requirements;
17


content and language of instructions for use;
record keeping procedures;
advertising and promotion;
recalls and field corrective actions;
import and export restrictions; and
tariff regulations, duties, and tax requirements;
We may also become subject to the following additional requirements in many foreign countries in which we may sell future medical devices, including in the areas of:
clinical testing;
post-market surveillance, including reporting of deaths or serious injuries and malfunctions that, if they were to recur, could lead to death or serious injury;
registration for reimbursement; and
necessity of testing performed in country by distributors for licensees.
Other Healthcare Laws and Regulations
Other Healthcare Laws
Medical device manufacturers are subject to additional healthcare regulation and enforcement by the federal government and by authorities in the states and foreign jurisdictions in which they conduct their business and may constrain the financial arrangements and relationships through which we research, as well as, sell, market and distribute any products for which we obtain marketing approval or certification. Such laws include, without limitation, federal and state anti-kickback, fraud and abuse, false claims, and physician and other healthcare provider payment transparency laws and regulations. If their operations are found to be in violation of any of such laws or any other governmental regulations that apply, they may be subject to penalties, including, without limitation, administrative, civil and criminal penalties, damages, fines, disgorgement, the curtailment or restructuring of operations, integrity oversight and reporting obligations, exclusion from participation in federal, state, and foreign healthcare programs and imprisonment.
Coverage and Reimbursement
With respect to our current products, including the Owlet Smart Sock, Owlet Dream Sock, Owlet Cam and Owlet Dream Lab, we utilize a direct-to-consumer model where consumers purchase our products directly from us or one of our retailers. Currently, these products are not covered or reimbursed by any third-party payor. We are actively developing a strategy to enable healthcare providers to obtain reimbursement for products for which we successfully obtain FDA authorization or similar authorization or certification in foreign jurisdictions, including the Owlet BabySat, or the services associated with such products. However, this new strategy may not be successful as payors may refuse to provide coverage and reimbursement for these products even if we obtain FDA authorization or similar authorization or certification in foreign jurisdictions.
Sales of any product that we may develop and for which we may obtain marketing authorization or certification from the FDA and/or comparable foreign regulatory authorities or notified bodies depend, in part, on the extent to which such product or services associated with such product will be covered by third-party payors, such as federal, state, and foreign government healthcare programs, commercial insurance and managed healthcare organizations, and the level of reimbursement for such product or services associated with such product by third-party payors. Even though a new product may have been cleared or otherwise authorized , or certified for commercial distribution by the FDA, foreign regulatory authorities or notified bodies, we may find limited demand for the product unless and until reimbursement approval has been obtained from governmental and private third-party payors.
Decisions regarding the extent of coverage and amount of reimbursement to be provided are made on a plan-by-plan basis. These third-party payors are increasingly reducing reimbursements for medical devices and services. In addition, the U.S. government, state legislatures and foreign governments have continued implementing cost-containment programs, including price controls, restrictions on coverage and reimbursement and requirements for substitution of generic products. Adoption of price controls and cost-containment measures, and adoption of more restrictive policies in jurisdictions with existing controls and measures, could further limit sales of any product. Decreases in third-party reimbursement for any product or a decision by a third-party payor not to cover the product or the services associated with the product could reduce physician usage and patient demand for the product and also have a material adverse effect on sales.
18


Healthcare Reform
The U.S. and some foreign jurisdictions are considering or have enacted a number of legislative and regulatory proposals to change the healthcare system in ways that could affect our ability to sell our products that obtain marketing authorization or certification from the FDA and/or comparable foreign regulatory authorities or notified bodies profitably. Among policy makers and payors in the U.S. and elsewhere, there is significant interest in promoting changes in healthcare systems with the stated goals of containing healthcare costs, improving quality or expanding access. Current and future legislative proposals to further reform healthcare or reduce healthcare costs may limit coverage of or lower reimbursement for the services associated with the use of our products. The cost containment measures that payors and providers are instituting and the effect of any healthcare reform initiative implemented in the future could impact our revenue from the sale of our products.
In the U.S., the implementation of the Affordable Care Act, or ACA, for example, has changed healthcare financing and delivery by both governmental and private insurers substantially, and affected medical device manufacturers significantly. The ACA included, among other things, incentives to programs that increase the federal government’s comparative effectiveness research, and implemented payment system reforms including a national pilot program on payment bundling to encourage hospitals, physicians and other providers to improve the coordination, quality and efficiency of certain healthcare services through bundled payment models. Additionally, the ACA expanded eligibility criteria for Medicaid programs and created a new Patient-Centered Outcomes Research Institute to oversee, identify priorities in, and conduct comparative clinical effectiveness research, along with funding for such research.
Since its enactment, there have been executive, judicial and Congressional challenges to certain aspects of the ACA. On June 17, 2021, the U.S. Supreme Court dismissed the most recent judicial challenge to the ACA brought by several states without specifically ruling on the constitutionality of the ACA. Prior to the Supreme Court’s decision, President Biden issued an executive order initiating a special enrollment period from February 15, 2021 through August 15, 2021 for purposes of obtaining health insurance coverage through the ACA marketplace. The executive order also instructed certain governmental agencies to review and reconsider their existing policies and rules that limit access to healthcare. It is unclear how healthcare reform measures enacted by Congress or implemented by the Biden administration, if any, will impact our business.
In addition, other legislative changes have been proposed and adopted since the ACA was enacted. For example, the Budget Control Act of 2011, among other things, reduced Medicare payments to providers by 2% per fiscal year, effective on April 1, 2013 and, due to subsequent legislative amendments to the statute, will remain in effect through 2030, with the exception of a temporary suspension from May 1, 2020 through March 31, 2022, and a 1% reduction from April 1, 2022 through June 30, 2022, unless additional Congressional action is taken. Additionally, the American Taxpayer Relief Act of 2012, among other things, reduced Medicare payments to several providers, including hospitals, and increased the statute of limitations period for the government to recover overpayments to providers from three to five years. The Medicare Access and CHIP Reauthorization Act of 2015 repealed the formula by which Medicare made annual payment adjustments to physicians and replaced the former formula with fixed annual updates and a new system of incentive payments, which began in 2019, that are based on various performance measures and physicians’ participation in alternative payment models, such as accountable care organizations.
We expect additional state, federal or foreign healthcare reform measures to be adopted in the future, any of which could limit the amounts that federal, state or foreign governments will pay for healthcare products and services, which could result in reduced demand for our products for which we obtain marketing authorization or certification or additional pricing pressure.
Data Privacy and Security
Numerous state, federal and foreign laws, including consumer protection laws and regulations, govern the collection, dissemination, use, access to, confidentiality and security of personal information, including health-related information. In the U.S., numerous federal and state laws and regulations, including data breach notification laws, health information privacy and security laws, including HIPAA, and consumer protection laws and regulations (e.g., Section 5 of the FTC Act), that govern the collection, use, disclosure, and protection of health-related and other personal information could apply to our operations or the operations of our partners. In addition, certain state and non-U.S. laws, such as the CCPA and the GDPR, govern the privacy and security of personal data, including health-related data in certain circumstances, some of which are more stringent than HIPAA and many of which differ from each other in significant ways and may not have the same effect, thus complicating compliance efforts. Failure to comply with these laws, where applicable, can result in the imposition of significant civil and/or criminal penalties and private litigation. Privacy and security laws, regulations, and other obligations are constantly evolving, may conflict with each other to complicate compliance efforts, and can result in investigations, proceedings, or actions that lead to significant civil and/or criminal penalties and restrictions on data processing.
19


Telemedicine
We intend to develop and market telehealth/telemedicine services internationally and may be subject to additional regulations and requirements governing such services. The provision of telemedicine services, which are considered healthcare services, is not regulated or harmonized at EU/EEA level and we would therefore need to comply with individual regulations in each EEA country as well as other foreign jurisdictions.
Anti-Bribery and Corruption Laws
We may also be subject to similar anti-corruption legislation implemented in Europe through EU Member State laws and under the Organization for Economic Co-operation and Development’s Convention on Combating Bribery of Foreign Public Officials in International Business Transactions.
Intellectual Property
Since inception, we have been methodical around our intellectual property strategy. We rely on a combination of patent, copyright, trademark and trade secret laws and confidentiality and invention assignment agreements to protect our intellectual property rights. As of December 31, 2021, we had 52 issued patents (with numerous others pending) and 40 registered trademarks. Our patents include utility patents covering technology ranging from placement of electrodes to the base of the baby monitor. We have foreign patents and patent applications pending in the EU, Australia, Canada, and China. Our issued patents with claims generally directed to an infant sock comprised of a sensing device in a sleeve in the sock and a strap are expected to expire in the U.S. in 2032 and in China in 2035. Our issued patents with claims generally directed to placement of fabric electrodes and assembly of such are each expected to expire in the U.S., the EU, Australia, China and Canada in 2038. Pending applications in the aforementioned countries will have expiration dates between 2034 and 2040. We continually review our development efforts to assess the existence and patentability of new intellectual property.
Our pending patent applications may not result in issued patents, and we cannot assure you that any current or subsequently issued patents will protect our intellectual property rights. Third parties may challenge certain patents issued to us as invalid, may independently develop similar or competing technologies or may design around any of our patents. We cannot be certain that any of the steps we have taken will prevent the misappropriation of our intellectual property, particularly in foreign countries where the laws may not protect our proprietary rights in these countries as fully as in the U.S.
Ayla Subscription Agreement
In May 2014, we entered into a subscription agreement with Ayla Networks, Inc. (“Ayla”), pursuant to which Ayla has granted us a non-exclusive, royalty free license to certain cloud services and product software used in our Owlet Smart Sock product and to support the transfer of data to the cloud and back to Owlet and the customer.
The initial term of the agreement expired in December 2015, but we have extended the term of the agreement until January 1, 2024. We may terminate the agreement at any time. Additionally, either party may terminate the agreement upon 30 days’ notice if the other party materially breaches the agreement.
Under the agreement, we have agreed to indemnify Ayla against certain claims arising in connection with or breach of the agreement or our use, or misuse, of the services provided by Ayla under the agreement. We are also entitled to indemnification from Ayla under certain scenarios arising from third-party claims of intellectual property infringement by Ayla.
In connection with the subscription agreement, we also entered into a data processing agreement with Ayla, pursuant to which Ayla has agreed to implement appropriate data security measures and treat all personal data as strictly confidential.

We currently utilize Ayla to support both our Smart Sock and Dream Sock product offerings.
Service and License Agreement with ThroughTek
In January 2018, we entered into a service and license agreement with ThroughTek Co., Ltd. (“TUTK”), pursuant to which TUTK has granted us a non-exclusive, royalty free license to its “Kalay” platform. TUTK provides the data transfer services from the Owlet Cam to the Owlet application so users can view the video feed.
Under the agreement, we paid an initial license fee of $25,000 plus a low-single digit dollar amount per device license fee to access TUTK’s services (“UID”). The UID cost per unit is subject to change at any time by our mutual
20


agreement, but shall not increase by more than a low single-digit percentage per year. We also pay certain negotiated services fees to TUTK, which are also subject to a low single digit percentage increase.
The initial term of the agreement expired in January 2021, but automatically renewed for an additional one-year period. The agreement will continue to automatically renew for one-year periods, unless terminated by us or TUTK at least 90 days prior to the end of the then-current renewal period. Among other things, either party may terminate the agreement under certain customary conditions, including for non-payment, uncured breaches of the agreement or in the event of the other party’s insolvency.
In connection with the services provided under the agreement, we and TUTK have agreed to mutually indemnify the other party against certain claims resulting from infringement of third-party intellectual property.
Environmental Matters
Our operations, properties and products are subject to a variety of U.S. and foreign environmental laws and regulations governing, among other things, air emissions, wastewater discharges, management and disposal of hazardous and non-hazardous materials and waste and remediation of releases of hazardous materials. We believe, based on current information that we are in material compliance with environmental laws and regulations applicable to us. However, our failure to comply with present and future requirements under these laws and regulations, or environmental contamination or releases of hazardous materials on our leased premises, as well as through disposal of our products, could cause us to incur substantial costs, including clean-up costs, personal injury and property damage claims, fines and penalties, costs to redesign our products or upgrade our facilities and legal costs, or require us to curtail our operations, any of which could seriously harm our business.
Human Capital Resources
As of December 31, 2021, we had 200 full-time employees. None of our employees is represented by a labor union, and we consider our employee relations to be good. Our human capital resources objectives include, as applicable, identifying, recruiting, retaining, incentivizing and integrating our existing and additional employees. The principal purposes of our equity incentive plans are to attract, retain and motivate selected employees, consultants and directors through the granting of stock-based compensation awards and cash-based performance bonus awards.
We believe our innovation and operational excellence stems directly from the diversity in our community and our common commitment to equity, inclusion, and equal access to healthcare. As of December 31, 2021, over 48% of our employees were women and over 27% were from minority groups.

Corporate Information
Owlet Baby Care Inc. was incorporated in Delaware on February 24, 2014 as a Delaware corporation. SBG was incorporated in Delaware on June 23, 2020. On July 15, 2021, SBG closed the Merger with Owlet Baby Care Inc. As a result of the Merger, Owlet Baby Care, Inc. became a wholly-owned subsidiary of SBG, and SBG changed its name to Owlet, Inc.

Available Information
Our website address is www.owletcare.com. The contents of, or information accessible through, our website are not part of this Annual Report on Form 10-K. We make our filings with the SEC, including our Annual Report on Form 10-K, Quarterly Reports on Form 10-Q, Current Reports on Form 8-K and all amendments to those reports, as well as beneficial ownership filings available free of charge on our website as soon as reasonably practicable after we file such reports with, or furnish such reports to, the SEC.
We may use our website as a distribution channel of material information about the Company. Financial and other important information regarding the Company is routinely posted on and accessible through the Investors sections of its website at https://investors.owletcare.com. In addition, you may automatically receive email alerts and other information about the Company when you enroll your email address under the “Resources” menu on the Investors section of our website at https:// investors.owletcare.com.
The reference to our website address does not constitute incorporation by reference of the information contained on or available through our website, and you should not consider such information to be a part of this Annual Report on Form 10-K.
21



Item 1A. Risk Factors.

Our business is subject to numerous risks and uncertainties that you should be aware of in evaluating our business. If any such risks and uncertainties actually occur, our business, prospects, financial condition and results of operations could be materially and adversely affected. The risks described below are not the only risks that we face. Additional risks and uncertainties not currently known to us, or that we currently deem to be immaterial may also materially adversely affect our business, prospects, financial condition and results of operations. The risk factors described below should be read together with the other information set forth in this Annual Report on Form 10-K, including our consolidated financial statements and the related notes, as well as in other documents that we file with the Securities and Exchange Commission ("SEC").

Risks Related to Our Business and Operations

We have a limited operating history and have grown significantly in a short period of time.

We were organized in 2014 and began selling our Owlet Smart Sock in 2015, our Owlet Cam in 2018, and launched our Owlet Dream Sock in January 2022. Accordingly, we have a limited operating history, which makes an evaluation of our future prospects difficult. Our operating results have fluctuated in the past, and we expect our future quarterly and annual operating results to fluctuate as we focus on increasing the demand for our products and services. We may need to make business decisions that could adversely affect our operating results, such as modifications to our pricing strategy, business structure or operations.

We have a history of net losses, and we may not achieve or maintain profitability in the future.

We have incurred net losses since inception. For the years ended December 31, 2020 and 2021, we incurred net losses of $10.5 million and $71.7 million, respectively. As a result of our ongoing losses, we had an accumulated deficit of $71.7 million and $143.4 million as of December 31, 2020 and December 31, 2021, respectively. Since inception, we have spent significant funds on organizational and start-up activities, to recruit key managers and employees, to develop our products, services and connected nursery ecosystem, to develop our manufacturing know-how and customer support resources and for research and development. The net losses we incur may fluctuate significantly from quarter to quarter and may increase as a result of the COVID-19 pandemic, such as its impact on logistics and other supply chain costs.

We have encountered and will continue to encounter risks and difficulties frequently experienced by growing companies in rapidly changing industries, including increasing expenses as we continue to grow our business. We expect our operating expenses to increase significantly over the next several years as we continue to hire additional personnel, expand our operations and infrastructure, and continue to develop and expand our products and services. In addition to the expected costs to grow our business, we also expect to incur additional legal, accounting, and other expenses as a newly public company. These investments may be more costly than we expect, and if we do not achieve the benefits anticipated from these investments, or if the realization of these benefits is delayed, they may not result in increased revenue or growth in our business. If our growth rate were to decline significantly or become negative, it could adversely affect our financial condition and results of operations. If we are not able to achieve or maintain positive cash flow in the long term, we may require additional financing, which may not be available on favorable terms or at all or which would be dilutive to our stockholders. If we are unable to successfully address these risks and challenges as we encounter them, our business, results of operations, and financial condition would be adversely affected. Our failure to achieve or maintain profitability could negatively impact the value of our common stock and warrants.

We ceased distribution of the Owlet Smart Sock in the U.S. in October 2021 following receipt of a Warning Letter from the FDA, and we will not be able to market and sell the Owlet Smart Sock with the same features and claims unless and until we receive marketing authorization from the FDA, which we may not receive in a timely fashion, or at all. Moreover, although we launched a new product called the Owlet Dream Sock in the U.S. while we pursue marketing authorization for the notification features that were the subject of the Warning Letter, the FDA may allege that the Owlet Dream Sock is also a medical device that cannot be marketed without first receiving FDA marketing authorization.

On October 1, 2021, we received a Warning Letter from the FDA in which the FDA asserted that the Owlet Smart Sock is a medical device requiring marketing authorization from the FDA due to its marketing and functionality in measuring blood oxygen saturation and pulse rate, and providing an alarm to notify users that these measurements are outside of preset values.  Prior to receipt of the Warning Letter, we were dependent on sales of the Owlet Smart
22


Sock in the U.S. for a majority of our revenue, and expected to continue to be dependent for the foreseeable future. Following receipt of the Warning Letter, we ceased distribution of the Owlet Smart Sock in the U.S., and we have been in communications with the FDA regarding our plans to pursue marketing authorization for the notification features that were the subject of the Warning Letter.  Although the FDA has not requested or required that we recall Owlet Smart Sock products that had already been distributed prior to our decision to cease distribution, we cannot assure you that such a recall will not be requested or required, or that we will not decide to recall such products, in the future.  Any such recall could have a material adverse effect on our business, financial condition and results of operations.

We may not be successful in our efforts to obtain marketing authorization from the FDA for the notification features that were the subject of the Warning Letter, and even if we do, it may take significantly longer than we anticipate.  The FDA marketing authorization process can be expensive, lengthy and uncertain. For example, the process of pursuing and obtaining clearance of a premarket notification under Section 510(k) of the Federal Food, Drug, and Cosmetic Act (“FDCA”), also known as a 510(k) clearance, usually takes from three to 12 months, but can take longer. The process of obtaining approval of a premarket approval application (“PMA”) is much more costly and uncertain than the 510(k) clearance process and generally takes from one to three years, or even longer, from the time the application is submitted to the FDA.  The de novo classification process may similarly take an extended period of time.  In addition, a PMA generally requires the performance of one or more clinical trials. Clinical data may also be required in connection with an application for 510(k) clearance or a de novo request. Despite the time, effort and cost, a device may not obtain marketing authorization by the FDA. Any delay or failure to obtain necessary regulatory marketing authorizations would harm our business. Furthermore, even if we are granted such marketing authorization, it may include significant limitations on the uses, which may limit the potential commercial market for the device.

Although we have ceased distribution of the Owlet Smart Sock in the United Stated while we pursue marketing authorization for it, we launched and are marketing a new product, the Owlet Dream Sock, which we do not believe will be regulated by the FDA as a medical device based on the device's functionality and claims. However, the FDA may disagree with our assertion that the product is not a medical device. If the Owlet Dream Sock is not well-received by customers, we may be delayed in generating or unable to generate revenues from sales of the product in the U.S. Moreover, if the FDA asserts that the Owlet Dream Sock is a medical device requiring FDA marketing authorization, we may be required to cease distribution of the product and recall product already distributed, and we may be restricted from selling the product again until after marketing authorization has been received, which is a long, expensive, and uncertain process, and we may not obtain such marketing authorization, if required. If the FDA were to assert that the Owlet Dream Sock is a medical device requiring marketing authorization, we could also be subject to regulatory enforcement action. In addition, we may be required to modify the product’s functionality or limit our marketing claims for the product, whether or not we obtain such marketing authorization. In any such event, our business could be substantially harmed.

If any governmental authority or notified body were to require marketing authorization or similar certification for the Owlet Smart Sock, or for any other product that we sell and which Owlet does not believe requires such marketing authorization or certification, we could be subject to regulatory enforcement action and/or required to cease selling or recall the product pending receipt of marketing authorization or similar certification from such other governmental authority or notified body, which can be a lengthy and time-consuming process, harm financial results and have long-term negative effects on our operations.

We currently sell the Owlet Smart Sock in certain countries outside of the U.S., and we have not obtained any medical device marketing authorization, approval, or certification from any other governmental authority or notified body. In response to inquiries from the FDA and regulatory authorities in other jurisdictions regarding the marketing of the Owlet Smart Sock, we have communicated our belief that the Owlet Smart Sock is not a medical device and does not require marketing authorization from the FDA or similar marketing authorization or certification from such other regulatory authorities or notified bodies. However, certain regulatory authorities have expressed they do not agree with that conclusion and have required us to obtain marketing authorization, such as a clearance or approval, or other certification to continue to sell the product.

For example, the FDA sent us a Warning Letter on October 1, 2021 stating that the Owlet Smart Sock was an adulterated medical device being marketed without FDA approval, clearance or other marketing authorization, and FDA requested that we stop commercial distribution of the Owlet Smart Sock. Pursuant to the FDA’s request, we ceased commercial distribution of the Owlet Smart Sock in the U.S. on October 21, 2021. As another example, the Medicines and Healthcare products Regulatory Agency (“MHRA”) the regulatory authority responsible for the United Kingdom (“UK”) medical device market, has asserted that the Owlet Smart Sock requires certification by a notified body and subsequent registration as a medical device in the UK, but has indicated it will allow us to continue to market the Owlet Smart Sock until the end of 2022 without such certification or registration. We may not be able to obtain such certification and may not be able to register the Owlet Smart Sock as a medical device within this time period, at which point we would be required to cease marketing the Owlet Smart Sock in the UK,
23


unless the MHRA grants us an extension. In addition, Health Canada, Canada's medical device regulatory authority, has also determined that the Owlet Smart Sock meets the definition of a medical device that requires premarket approval and requested that we stop selling and advertising the Owlet Smart Sock. Pursuant to Health Canada’s request, we ceased selling and advertising the Owlet Smart Sock in Canada on December 10, 2021, and are in the process of pursuing a medical device license for the Owlet Smart Sock from Health Canada.

Obtaining authorization or certification to sell the Owlet Smart Sock as a medical device is a time-consuming and costly process and we may be precluded from selling the Owlet Smart Sock if we are required to obtain marketing authorization, such as a clearance or approval, or other certification. If granted, a marketing authorization or certification could require conditions to sale, for example, a prescription requirement. If regulatory authorities require such marketing authorization, including clearance or approval, or other certification for the Owlet Smart Sock, or for any other product that we sell and which we do not believe requires such marketing authorization or certification, we could be subject to regulatory enforcement action and/or required to cease selling or recall the product in the corresponding jurisdiction pending receipt of such marketing authorization or certification, which can be a lengthy and time-consuming process. In addition, we may be required to modify the product’s functionality or limit our marketing claims for the product, whether or not we obtain such marketing authorization or other required certification. In any such event, our business could be substantially harmed.

Our products rely on mobile applications to function and we rely on Apple’s App Store and the Google Play Store for distribution of our mobile applications.

Our products rely on the installation of our mobile applications to function properly. We develop mobile applications on Apple’s iOS platform and Google’s Android platform. Our customers download our mobile applications on Apple’s App Store and the Google Play Store. The App Store and Google Play Store are controlled entirely by Apple and Google, respectively. Mobile applications on the iOS platform are subject to approval by Apple and mobile applications on the Android platform are subject to approval by Google. The terms and policies for maintenance of existing applications and the approval process of new applications are very broad and subject to interpretation and frequent changes, and Apple and Google have complete control over the approval or removal of each mobile application submitted to or offered on their respective platforms. If either Apple or Google changes its standard terms and conditions for maintaining or approving mobile applications in a way that is detrimental to us or decide to remove our mobile applications from their stores, it will be much more difficult or may not be possible for users to install the mobile applications and receive updates to the mobile applications, and our current or future products may cease to function as intended. For example, in response to the October 1, 2021 Warning Letter, Apple notified us that, as of November 17, 2021, the Owlet Care App would no longer available for download in the App Store to new users in the U.S. Apple initially removed the Owlet Care App from the App Store globally, but has since made it available for download in all jurisdictions except for the U.S. and Canada. Apple has informed us that it will remove our mobile applications from the App Store in any country in which any Owlet product requires marketing authorization or certification from any governmental authority or notified body. As a result, we have designed a new mobile application called the Owlet Dream App that is currently available for Owlet Dream Sock and Owlet Cam users in the U.S. on the App Store and Google Play Store. However, in the event that Apple determines the Owlet Dream App implicates the functionalities and claims that the FDA asserted rendered the Owlet Smart Sock a medical device in the Warning Letter, Apple may remove the Owlet Dream App from the App Store. If Apple removes the Owlet Dream App from the App Store or Google removes the Owlet Dream App from the Google Play Store, our Owlet Dream Sock and Owlet Dream Duo products would not function as intended, and we may be required to recall our products, issue refunds and accept returns, and we may be subject to costly litigation.

A substantial portion of our sales comes through a limited number of retailers.

Historically, we have relied on a limited number of retailers for a substantial portion of our total sales. For example, sales through our top three retail customers represented 51% of our revenue for the year ended December 31, 2020 and 50% for the year ended December 31, 2021. These retailers work with us on a non-exclusive basis. If we are unable to establish, maintain or grow these relationships over time, or if these relationships grow more slowly than we anticipate, we are likely to fail to recover these costs and our operating results will suffer. The loss of any significant retail customer, whether or not related to our business or our products or services, could have an impact on the growth rate of our revenue as we work to obtain new retail customers or replacement relationships. Contracts with retailers may typically be terminated or renegotiated before their term expires for various reasons, subject to certain conditions. For example, after a specified period, certain of our contracts are terminable for convenience by such retailers, subject to a notice period. Additionally, certain contracts may be terminated immediately by the retailer if we go bankrupt or if we fail to comply with certain specified laws. Any renegotiation of the commercial agreements may result in less favorable economic terms for us. Retailers may also consolidate their operations, reducing the overall number of locations in which they sell our products and services. Historically, we have had retail customers declare bankruptcy and stop operations, negatively affecting our sales and business. If regulatory actions such as the Warning Letter we received in October 2021 regarding the regulatory status of the Owlet Smart Sock are threatened or taken against us or our products, retailers may stop carrying our products. For example, U.S.
24


retailers have suspended U.S. sales of the Owlet Smart Sock and Owlet Duo. In response to the Warning Letter, our retail customers have returned or are returning existing inventory of the Owlet Smart Sock and Owlet Duo. Such returns have had, and may continue to have, a material adverse effect on our business, financial condition and results of operations.

In order to grow our business, we anticipate that we will continue to depend on our relationships with third parties, including our retailers. Identifying retailers, and negotiating and documenting relationships with them, requires significant time and resources. Our competitors may be effective in providing incentives to third parties to favor their products or services. If we are unsuccessful in establishing, or maintaining or strengthening our relationships with third parties, our ability to compete in the marketplace or to grow our revenue could be impaired and our results of operations may suffer. Even if we are successful, these relationships may not result in increased customer use of our services or increased revenue.

We will need to continue to increase the size of our organization and, if we fail to manage our growth effectively, our business could be materially and adversely affected.

Prior to the receipt of the Warning Letter, we experienced recent rapid growth and anticipate further growth. For example, our revenue increased from $54.4 million for the nine months ended September 30, 2020 to $78.4 million for the nine months ended September 30, 2021. The number of our full-time employees increased from 111 as of December 31, 2020 to 200 as of December 31, 2021. This growth, however, is not assured and is subject to fluctuation. For example, our 2021 fourth quarter results were significantly and negatively impacted by the Warning Letter.

Our growth has placed significant demands on our management, financial, operational, technological and at the time of other resources, and we expect that our growth will continue to place significant demands on our management and other resources and will require us to continue developing and improving our operational, financial and other internal controls. Our need to effectively execute our growth strategy requires that we:
manage our commercial operations effectively;
identify, recruit, retain, incentivize and integrate additional employees;
provide adequate training and supervision to maintain our high-quality standards and preserve our culture and values;
manage our internal development and operational efforts effectively while carrying out our contractual obligations to third parties; and
continue to improve our operational, financial and management controls, reports systems and procedures.
Continued growth increases the challenges involved in addressing these goals in a cost-effective or timely manner, or at all. If we do not effectively manage our growth, we may not be able to execute on our business plan, respond to competitive pressures, take advantage of market opportunities, satisfy customer requirements or maintain high-quality product offerings, which could have a material adverse effect on our business, financial condition and results of operations.

We are highly dependent on our senior management, other key officers, our engineers and field sales team, and may be increasingly dependent on sales representatives and clinical specialists for the sale of any medical devices we may market, if approved. We face significant competition for talent from other healthcare, technology and high-growth companies, which include both large enterprises and privately-held companies. To attract top talent, we have had to offer, and believe we will need to continue to offer, highly competitive compensation packages before we can validate the productivity of those employees. In addition, we may not be able to hire new employees quickly enough to meet our needs and fluctuations in the price of our common stock may make it more difficult or costly to use equity compensation to motivate, incentivize and retain our employees.

We currently rely on a single manufacturer for the assembly of our Owlet Sock products and a single manufacturer for the assembly of our Owlet Cam. We will likely rely on single manufacturers for future products we may develop. If we encounter manufacturing problems or delays, we may be unable to promptly transition to alternative manufacturers and our ability to generate revenue will be limited.

We have no manufacturing capabilities of our own. We currently rely on a single manufacturer located in Thailand, Benchmark, for the manufacture of our Owlet Sock products. Additionally, we currently rely on a separate single manufacturer located in China, Shenzhen Aoni Electronic, for the manufacture of our Owlet Cam. We expect to rely on limited manufacturers for future products we may develop. For example, we have relied upon and expect to continue to rely upon a single manufacturer for the supply of the Owlet Band, a product that we are developing and may commercially launch in the future. For us to be successful, our contract manufacturers must be able to provide us with products in substantial quantities, in compliance with regulatory requirements, in accordance with agreed upon specifications, at acceptable costs and on a timely basis. While our existing manufacturers have generally met
25


our demand requirements on a timely basis in the past, their ability and willingness to continue to do so going forward may be limited for several reasons, including our relative importance as a customer of each manufacturer or their respective ability to provide assembly services to manufacture our products, which may be affected by the COVID-19 pandemic or other natural or man-made disasters. Earthquakes are of particular significance since our headquarters are located in an earthquake-prone area. We are also vulnerable to damage from other types of disasters, including power loss, attacks from extremist or terrorist organizations, epidemics, communication failures, fire, floods and similar events. Furthermore, our manufacturing agreements can be terminated by our contract manufacturers without cause by giving us prior notice of six months or less. The facilities and the manufacturing equipment used to produce our products would be difficult to replace and could require substantial time to repair if significant damage were to result from any of these occurrences. An interruption in our commercial operations could occur if we encounter delays or difficulties in securing these manufactured products for any reason and we cannot obtain an acceptable substitute.

Any transition to a new contract manufacturer, or any transition of products between existing manufacturers, could be time-consuming and expensive, may result in interruptions in our operations and product delivery, could affect the performance specifications of our products, could require that we modify the design of our products, or could require clearance, approval by the FDA, or similar clearances, approvals, or certifications from foreign regulatory authorities or notified bodies, depending on the nature of the product and the changes associated with the transition to the new manufacturer. If we are required to change a contract manufacturer, we will be required to verify that the new manufacturer maintains facilities, procedures and operations that comply with our quality standards and applicable regulatory requirements, which could further impede our ability to manufacture our products in a timely manner. We may not be able to identify and engage alternative contract manufacturers on similar terms or without delay. Furthermore, our contract manufacturers could require us to move to a different production facility. The occurrence of any of these events could harm our ability to meet the demand for our products in a timely and cost-effective manner, which could have a material adverse effect on our business, financial condition and results of operations.

The manufacture of our products is complex and requires the integration of a number of components from several sources of supply. Our contract manufacturers must manufacture and assemble these complex products in commercial quantities in compliance with regulatory requirements and at an acceptable cost. Our products require significant expertise to manufacture, and our contract manufacturers may encounter difficulties in scaling up production of our products, including problems with quality control and assurance, component supply shortages, increased costs, shortages of qualified personnel, the long lead time required to develop additional facilities for purposes of testing our products or difficulties associated with compliance with local, state, federal and foreign regulatory requirements. Manufacturing or quality control problems may arise in connection with the scale-up of the manufacture of our products. If we are unable to obtain a sufficient supply of product, maintain control over product quality and cost or otherwise adapt to anticipated growth, or if we underestimate growth, we may not have the capability to satisfy market demand, and our business and reputation in the marketplace will suffer. Conversely, if demand for our products decreases, we may have excess inventory, which could result in inventory write-offs that would have a material adverse effect on our business, financial condition and results of operations. We may also encounter defects in materials or workmanship, which could lead to a failure to adhere to regulatory requirements. Any defects could delay operations at our contract manufacturers’ facilities, lead to regulatory fines or halt or discontinue manufacturing indefinitely. Any of these outcomes could have a material adverse effect on our business, financial condition and results of operations.

If we are unable to obtain key materials and components from sole or limited source suppliers, we will not be able to deliver our products to customers.

We are currently devoting substantial resources to the development of new or advanced products and services. However, we may not be able to complete development on a timely basis, or at all. In addition, some of our products and products in development may be regulated by the FDA or foreign regulatory agencies as medical devices, which may require marketing authorization or similar certification from applicable regulatory authorities or notified bodies, including marketing authorization from the FDA, prior to commercialization. Our products and services, particularly those needing to meet FDA or other regulatory standards, may have higher manufacturing costs than legacy products and services, which could negatively impact our gross margins and operating results during these stages, without guarantees we will be able to successfully commercialize any such products.

If we successfully develop such products and services, we must still successfully manage their introductions to the market. Products and services that are not well-received by the market may lead to excess inventory and discounting of our existing products and services. Inventory levels in excess of consumer demand may result in inventory write-downs or write-offs and the sale of inventory at discounted prices may affect our gross margin and could impair the strength of our brand. Reserves and write-downs for rebates, promotions and excess inventory are recorded based on our forecast of future demand. Actual future demand could be less than our forecast, which may result in additional reserves and write-downs in the future, or actual demand could be stronger than our forecast, which may result in
26


increased shipping costs and a reduction to previously recorded reserves and write-downs in the future and increase the volatility of our operating results.

Introductions of new or advanced products and services could also adversely impact the sales of our existing products and services to consumers. For instance, the introduction or announcement of new or advanced products and services may shorten the life cycle of our existing products or reduce demand, thereby reducing any benefits of successful product or service introductions and potentially leading to challenges in managing write-downs or write-offs of inventory of existing products and services.

We have in the past experienced challenges managing the inventory of our products, which has led and may in the future lead to increased shipping costs for air freight in order to fulfill customer orders in a timely manner, which has affected our gross margin.

Adapting our production capacities to evolving patterns of demand is expensive, time-consuming and subject to significant uncertainties. We may not be able to adequately predict consumer trends and may be unable to adjust our production in a timely manner.

We market our products directly to consumers in the U.S. and a select number of international countries. If demand increases, we will be required to increase production proportionally. Adapting to changes in demand inherently lags behind the actual changes because it takes time to identify the change the market is undergoing and to implement any measures taken as a result. Finally, capacity adjustments are inherently risky because there is imperfect information, and market trends may rapidly intensify, ebb or even reverse. We have in the past not always been, and may in the future not be, able to accurately or timely predict trends in demand and consumer behavior or to take appropriate measures to mitigate risks and exploit opportunities resulting from such trends. Any inability in the future to identify or to adequately and effectively react to changes in demand could have a material adverse effect on our business, financial condition and results of operations.

Some of our products and services are in development or have been recently introduced into the market and may not achieve market acceptance, which could limit our growth and adversely affect our business, financial condition and results of operations.

Our portfolio of products and services continues to expand, and we are investing significant resources to enter into, and in some cases create, new markets for these products and services. We are continuing to invest in sales and marketing resources to achieve market acceptance of these products and services, but our technologies may not achieve general market acceptance. New products and services, such as the Owlet Dream Sock, may also fail to achieve the market acceptance that our existing products and services, such as the Owlet Smart Sock, have historically achieved.

The degree of market acceptance of these products and services will depend on a number of factors, including:

perceived benefits from and safety of our products and services;
perceived cost effectiveness of our products and services;
our ability to obtain any required marketing authorizations or certifications for our products and services and the label requirements of any marketing authorizations or certifications we may obtain;
coverage and reimbursement available through government and private healthcare programs for using some of our products and services; and
introduction and acceptance of competing products and services or technologies.
If our products and services do not gain market acceptance or if our customers prefer our competitors’ products and services, our potential revenue growth would be limited, which would adversely affect our business, financial condition and results of operations.

If we are unable to successfully develop and effectively manage the introduction of new products and services, our business may be adversely affected.

We must successfully manage introductions of new or advanced products, such as the Owlet Dream Sock, Owlet BabySat, Owlet OTC Smart Sock and Owlet Band, and services, such as the development of our software platform. Development of new products and services requires the expenditure of considerable time and resources, but we may not be able to successfully develop and introduce such products on a timely basis, or at all. Products and services that are not well-received by the market may lead to excess inventory and discounting of our existing products and services. Inventory levels in excess of consumer demand may result in inventory write-downs or write-offs and the sale of inventory at discounted prices, may affect our gross margin and could impair the strength of our brand. Reserves and write-downs for rebates, promotions and excess inventory are recorded based on our forecast of future
27


demand. Actual future demand could be less than our forecast, which may result in additional reserves and write-downs in the future, or actual demand could be stronger than our forecast, which may result in increased shipping costs and a reduction to previously recorded reserves and write-downs in the future and increase the volatility of our operating results.

Introductions of new or advanced products and services could also adversely impact the sales of our existing products and services to consumers. For instance, the introduction or announcement of new or advanced products and services may shorten the life cycle of our existing products or reduce demand, thereby reducing any benefits of successful product or service introductions and potentially leading to challenges in managing write-downs or write-offs of inventory of existing products and services. In addition, some of our products are regulated by the FDA or foreign regulatory agencies as medical devices, which will require marketing authorization from the FDA or similar marketing authorization or certification from other applicable regulatory authorities or notified bodies prior to commercialization. New products, particularly those products needing to meet FDA or other regulatory requirements, may have higher manufacturing costs than legacy products, which could negatively impact our gross margins and operating results. Accordingly, if we fail to effectively manage introductions of new or advanced products and services, our business may be adversely affected.

We have in the past experienced challenges managing the inventory of our products, which has led and may in the future lead to increased shipping costs for air freight in order to fulfill customer orders in a timely manner, which has affected our gross margin and could impair the strength of our brand.

The size and expected growth of our addressable market has not been established with precision and may be smaller than we estimate.

Our estimates of the addressable market for our current products and services and future products and services are based on a number of internal and third-party estimates and assumptions, including birth rate, income levels and demographic profiles. While we believe our assumptions and the data underlying our estimates are reasonable, these assumptions and estimates may not be correct. In addition, the statements in this Report relating to, among other things, the expected growth in the market for baby products and services are based on a number of internal and third-party estimates and assumptions and may prove to be inaccurate. For example, although we expect that the number of births will continue to increase, those trends could shift and the number of births could decrease. Furthermore, even if the birth rate increases as we expect, technological or medical advances could provide alternatives to our products and services and reduce demand. As a result, our estimates of the addressable market for our current or future products and services may prove to be incorrect. If the actual number of consumers who would benefit from our products and services, the price at which we can sell future products and services or the addressable market for our products and services is smaller than we estimate, it could have a material adverse effect on our business, financial condition and results of operations.

We spend significant amounts on advertising and other marketing campaigns to acquire new customers, which may not be successful or cost effective.

We market our products and services through a mix of digital and traditional marketing channels. These include paid search, digital display advertising, email marketing, affiliate marketing, and select print advertising. We also leverage our database of prospects and customers to further drive customer acquisition and referrals. We spend significant amounts on advertising and other marketing campaigns to acquire new customers, and we expect our marketing expenses to increase in the future as we continue to spend significant amounts to acquire new customers and increase awareness of our products and services. While we seek to structure our marketing campaigns in the manner that we believe is most likely to encourage consumers to use our products and services, we may fail to identify marketing opportunities that satisfy our anticipated return on marketing spend as we scale our investments in marketing, accurately predict customer acquisition, or fully understand or estimate the conditions and behaviors that drive consumer behavior. Further, state, federal and foreign laws and regulations governing the privacy and security of personal information are evolving rapidly and could impact our ability to identify and market to potential and existing customers. If federal, state, local or foreign laws governing our marketing activities become more restrictive or are interpreted by governmental authorities to prohibit or limit these activities, our ability to attract new customers and retain customers would be affected and our business could be materially harmed. In addition, any failure, or perceived failure, by us, to comply with any federal, state, or foreign laws or regulations governing our marketing activities could adversely affect our reputation, brand, and business, and may result in claims, proceedings, or actions against us by governmental entities, consumers, suppliers or others or other liabilities or may require us to change our operations and/or cease using certain marketing strategies. If any of our marketing campaigns prove less successful than anticipated in attracting new customers, we may not be able to adequately recover our marketing spend, and our rate of customer acquisition may fail to meet market expectations, either of which could have a material adverse effect on our business, financial condition and results of operations. Our marketing efforts may not result in increased sales of our products and services.

28


Further, web and mobile browser developers, such as Apple, Microsoft or Google, have implemented and may continue to implement changes, including requiring additional user permissions, in their browser or device operating system that impair our ability to measure and improve the effectiveness of advertising of our products and services. Such changes include limiting the use of first-party and third-party cookies and related tracking technologies, such as mobile advertising identifiers, and other changes that limit our ability to collect information that allows us to attribute consumer actions on advertisers’ websites to the effectiveness of advertising campaigns run by us. For example, Apple launched its Intelligent Tracking Prevention (“ITP”) feature in its Safari browser. ITP blocks some or all third-party cookies by default on mobile and desktop and ITP has become increasingly restrictive over time. Apple’s related Privacy-Preserving Ad Click attribution, intended to preserve some of the functionality lost with ITP, would limit cross-site and cross-device attribution, prevent measurement outside a narrowly-defined attribution window, and prevent ad re-targeting and optimization. Similarly, Google recently announced that it plans to stop supporting third-party cookies in its Google Chrome browser. Google has also put forth a new initiative called the Privacy Sandbox, which is meant to curtail improper tracking while continuing to allow ad targeting within Google Chrome. Under Google’s Privacy Sandbox initiative, cookies will be replaced by five browser application programming interfaces (“APIs”) that will allow advertisers to receive aggregated data without using cookies. Google Privacy Sandbox is still being developed, but if it is adopted, could require us to make changes to how we collect information on our consumers and our marketing activities. Further, Apple announced certain changes, including introducing an AppTrackingTransparency framework that will limit the ability of mobile applications to request an iOS device’s advertising identifier and may also affect our ability to track consumer actions.

In addition, we believe that building a strong brand and developing and achieving broad awareness of our brand is critical to achieving market success. If any of our brand-building activities prove less successful than anticipated in attracting new customers, we may not be able to recover our brand-building spend, and our rate of customer acquisition may fail to meet market expectations, either of which could have a material adverse effect on our business, financial condition and results of operations. There can be no assurance that our brand-building efforts will result in increased sales of our products and services.

If we are unable to continue to drive consumers to our website, it could adversely affect our revenue.

Many consumers find our website by searching for baby products and services through internet search engines or from word-of-mouth and personal recommendations. A critical factor in attracting visitors to our website is how prominently we are displayed in response to search queries. Accordingly, we use search engine marketing as a means to provide a significant portion of our customer acquisition. Search engine marketing includes both paid website visitor acquisition on a cost-per-click basis and visitor acquisition on an unpaid basis, often referred to as organic or algorithmic search.

One method we employ to acquire visitors via organic search is commonly known as search engine optimization (“SEO”). SEO involves developing our website in a way that enables the website to rank high for search queries for which our website’s content may be relevant. We also rely heavily on favorable recommendations from our existing customers to help drive traffic to our website. If our website is listed less prominently or fails to appear in search result listings for any reason, it is likely that we will attract fewer visitors to our website, which could adversely affect our revenue.

Our success depends substantially on our reputation and brand.

Our success is dependent in large part upon our ability to maintain and enhance our reputation and brand. Brand value can be severely damaged even by isolated incidents, particularly if the incidents receive considerable negative publicity or result in litigation. Some of these incidents may relate to actions taken (or not taken) with respect to social, environmental, and community outreach initiatives, the personal conduct of individuals actually, or perceived to be associated, with our brand, and our growth or rebranding strategies. We are heavily dependent on customers who use our products and services, in particular our Owlet Smart Sock, to provide good reviews and word-of-mouth recommendations to contribute to the growth of our brand and reputation. Customers who are dissatisfied with their experiences with our products and services or services may post negative reviews. We may also be the subject of blog, forum or other media postings that include statements that create negative publicity. If the FDA or other regulatory body makes public its determination that any of our products is a medical device that is not in compliance with applicable requirements, such as occurred in the FDA’s October 1, 2021 Warning Letter with respect to the Owlet Smart Sock, or takes some other public action such as issuing a public enforcement action or recommending or mandating a recall, customers may react negatively and stop purchasing or recommending our products or services, or may demand refunds. Our receipt of the Warning Letter may also adversely impact our reputation and relationship with customers, manufacturers, retailers and other third parties on whom our business relies, and the full extent of the impact of the Warning Letter on our relationship with those parties remains uncertain. Any negative reviews or publicity, whether real or perceived, disseminated by word-of-mouth, by the general media, by electronic
29


or social networking means or by other methods, could harm our reputation and brand and could severely diminish consumer confidence in our products and services.

Operations in international markets will expose us to additional business, political, regulatory, operational, financial and economic risks.

Further expanding our business to attract customers in countries other than the U.S. is a key element of our long-term business strategy. International operations expose us and our representatives, agents and distributors to risks inherent in operating in foreign jurisdictions, and such exposure will increase as our international presence and activities increase. These risks include:
the imposition of additional U.S. and foreign governmental controls or regulations;
the imposition of costly and lengthy new export licensing requirements;
the imposition of requirements to maintain data and the processing of that data on servers located within the U.S. or in foreign countries;
a shortage of high-quality employees, sales people and distributors;
the loss of any key personnel that possess proprietary knowledge, or who are otherwise important to our success in certain international markets;
changes in duties and tariffs, license obligations and other non-tariff barriers to trade;
the imposition of new trade restrictions;
the imposition of restrictions on the activities of foreign agents, representatives and distributors;
compliance with or changes in foreign tax laws, regulations and requirements and economic and trade sanctions programs including, for example, the U.S., UK and EU sanctions relating to the Russian Federation, Ukraine and the Republic of Belarus initially implemented in February 2022;
evolution in regulatory landscapes, such as on account of the UK leaving the EU, and uncertainties that arise from such evolution;
pricing pressure;
changes in foreign currency exchange rates;
laws and business practices favoring local companies;
political instability and actual or anticipated military or political conflicts;
financial and civil unrest worldwide;
outbreaks of illnesses, pandemics or other local or global health issues;
natural or man-made disasters;
the inability to collect amounts paid by foreign government customers to our appointed foreign agents;
longer payment cycles, increased credit risk and different collection remedies with respect to receivables; and
difficulties in enforcing or defending intellectual property rights.
In addition, we purchase a portion of our raw materials and components from international sources. The sale and shipment of our products and services across international borders, as well as the purchase of materials and components from international sources, subject us to extensive U.S. and foreign governmental trade regulations, including those related to conflict minerals. Compliance with such regulations is costly and we could be exposed to potentially significant penalties if we are found not to be in compliance with such regulations. Any failure to comply with applicable legal and regulatory obligations could impact us in a variety of ways that include, but are not limited to, significant criminal, civil and administrative penalties, including imprisonment of individuals, fines and penalties, denial of export privileges, seizure of shipments, restrictions on certain business activities, and exclusion or debarment from government contracting. Also, the failure to comply with applicable legal and regulatory obligations could result in the disruption of our shipping, manufacturing and sales activities. Any material decrease in our international sales would adversely affect our business, financial condition and results of operations.

In June 2016, the UK held a referendum pursuant to which voters elected to leave the EU, commonly referred to as Brexit. The UK formally withdrew from the EU and ratified a trade and cooperation agreement (“TCA”) governing its future relationship with the EU. The TCA came into effect on January 1, 2021. The TCA addresses trade, economic arrangements, law enforcement, judicial cooperation and a governance framework including procedures for dispute resolution, among other things but does not specifically refer to medical devices. Because the agreement merely sets forth a framework in many respects and will require complex additional bilateral negotiations between
30


the UK and the EU as both parties continue to work on the rules for implementation, significant political and economic uncertainty remains about how the precise terms of the relationship between the parties will differ from the terms before withdrawal. Brexit has created additional uncertainties that may ultimately result in new regulatory costs and challenges for medical device companies and increased restrictions on imports and exports throughout Europe, which could adversely affect our ability to conduct and expand our operations in Europe and which may have an adverse effect on our business, financial condition and results of operations. Additionally, Brexit may increase the possibility that other countries may decide to leave the EU in the future.

We face and expect to face increasing competition from other companies, many of which have substantially greater resources than we do. If we do not successfully develop and commercialize enhanced or new products and services that remain competitive with products and services or alternative technologies developed by others, we could lose revenue opportunities and customers, and our ability to grow our business would be impaired, adversely affecting our financial condition and results of operations.

We expect the industry in which we operate will continue to evolve and may be significantly affected by new product introductions and other market activities of industry participants. Certain potential competitors have substantially greater capital resources, larger product portfolios, larger user bases, larger sales forces and greater geographic presence, and have built relationships with retailers and distributors that may be more effective than ours. Our products and services face additional competition from companies developing products and services for use with third-party monitoring systems, as well as from companies that currently market similar products and services of their own, and may face further pressure from technology companies that have not historically operated in our industry.

Continuing technological advances and new product introductions within the home-use childcare electronics and service industry place our products and services at risk of obsolescence. Our long-term success depends upon the development and successful commercialization of new products and services, new or improved technologies and additional applications for our existing technologies, including products or applications that may be subject to the oversight of the FDA or comparable foreign regulatory authorities and could require marketing authorization by the FDA or similar marketing authorization or certification from comparable foreign regulatory authorities or notified bodies. The research and development process is time-consuming and costly and may not result in products and services or applications that we can successfully commercialize.

If we do not successfully adapt our products and services and applications, we could lose revenue opportunities and customers. Furthermore, in the event any of our products is regulated as a medical device and obtains marketing authorization from the FDA or similar marketing authorization or certification from comparable foreign regulatory authorities or notified bodies, one or more of our competitors may develop products that compete. For example, in the U.S., if any of our products is regulated as a medical device that is subject to and that obtains marketing authorization pursuant to the 510(k) clearance or de novo classification pathways, competitors may develop products that the FDA determines are substantially equivalent to our products and may use our products as predicate devices to obtain 510(k) clearances for their competing products.

Our business, financial condition, results of operations and growth have been and may continue to be impacted by the effects of the COVID-19 pandemic.

The COVID-19 pandemic may continue to negatively impact our operations and revenues and overall financial condition by harming the ability or willingness of customers to pay for our products and services due to macro-economic conditions resulting from the pandemic or the operations of manufacturers, suppliers and other third parties with which we do business. These challenges will likely continue for the duration of the pandemic, which is uncertain, and the macro-economic effects of the pandemic will likely continue far beyond the duration of the pandemic.

Numerous state, local, and foreign jurisdictions previously imposed, and others in the future may impose, “shelter-in-place” orders, quarantines, executive orders and similar government orders and restrictions for their residents to control the spread of COVID-19. Although the governor of Utah, where our headquarters are located, did not issue any “shelter-in-place” or “stay at home” orders, such orders could be instituted if the COVID-19 pandemic worsens. We have taken a number of precautionary measures to manage our resources and mitigate the adverse impact of the pandemic, which is intended to help minimize the risk to our employees, customers, and the communities in which we operate. Employees at our headquarters and certain other employees have been asked to work from home where possible, with only limited access given to employees to work in the office when necessary. For roles that require employees to be on-site, we are providing protective equipment, practicing social distancing and increasing sanitizing standards. As the COVID-19 pandemic continues, other potential disruptions may include delays by applicable state or federal and foreign regulatory authorities or bodies in processing potential submissions to that regulatory authority or body, delays in product development efforts and additional government requirements or other incremental mitigation efforts that may further impact our capacity to manufacture, sell and support the use of our
31


Owlet technologies. For example, as a result of the ongoing COVID-19 pandemic, regulatory review times have lengthened, and product introductions could be delayed or canceled, which would adversely affect our ability to grow our business in the U.S. and, particularly in light of the recent transition towards the new EU Medical Devices Regulation and reduced notified body capacity, in the EU. Moreover, if we do not obtain UKCA marking and certificates issued by UK notified bodies prior to the end of 2022, we will need to cease selling our products in the UK unless we receive an extension from the MHRA. In addition, even after “shelter-in-place” orders, quarantines, executive orders and similar government orders and restrictions for their residents to control the spread of COVID-19 are lifted, we may continue to experience disruptions to our business.

While the potential economic impact brought by and the duration of COVID-19 may be difficult to assess or predict, the widespread pandemic has resulted in, and may continue to result in, significant disruption of global financial markets, affecting our ability to access capital, which could in the future negatively affect our liquidity. In addition, a recession or market correction resulting from the spread of COVID-19 could materially affect our business and the value of our common stock. The COVID-19 pandemic has also resulted in a significant increase in unemployment in the U.S. which may continue even after the pandemic subsides. The occurrence of any such events may lead to reduced disposable income which could adversely affect the number of our products and services sold after the pandemic has subsided. Further, although we have experienced growth in our sales volume during the COVID-19 pandemic, this and any other favorable impacts we have experienced in connection with the pandemic may subside, and the ultimate effect of COVID-19 on our sales volume and other results of operations could differ substantially from our expectations and our experience to date.

We are involved, and may become involved in the future, in disputes and other legal or regulatory proceedings that, if adversely decided or settled, could materially and adversely affect our business, financial condition and results of operations.

We are, and may in the future become, party to litigation, regulatory proceedings or other disputes. In general, claims made by or against us in disputes and other legal or regulatory proceedings can be expensive and time-consuming to bring or defend against, requiring us to expend significant resources and divert the efforts and attention of our management and other personnel from our business operations. These potential claims may include but are not limited to personal injury and class action lawsuits, intellectual property claims and regulatory investigations relating to the advertising and promotional claims about our products and services and employee claims against us based on, among other things, discrimination, harassment or wrongful termination. Any one of these claims, even those without merit, may divert our financial and management resources that would otherwise be used to benefit the future performance of our operations. Any adverse determination against us in these proceedings, or even the allegations contained in the claims, regardless of whether they are ultimately found to be without merit, may also result in settlements, injunctions or damages that could have a material adverse effect on our business, financial condition and results of operations.

Additionally, in the past, securities class action litigation has often been brought against a company following a decline in the market price of its securities. In November 2021, we and certain of our executive officers and directors were named as defendants in two pending purported securities class action lawsuits. The complaints were filed on behalf of all investors who: (a) purchased the Company’s common stock between March 31, 2021 and October 4, 2021; or (b) held common stock in SBG as of June 1, 2021, and were eligible to vote in the Special Meeting held on July 14, 2021. The complaints alleged that we and certain executive officers and directors made false and/or misleading statements and failed to disclose certain information regarding the FDA’s likely classification of the Owlet Smart Sock as a medical device requiring marketing authorization. These lawsuits and any future lawsuits to which we may become a party are subject to inherent uncertainties and will likely be expensive and time-consuming to investigate, defend and resolve. Any litigation to which we are a party may result in an onerous or unfavorable judgment that may not be reversed upon appeal, or in payments of substantial monetary damages or fines, or we may decide to settle this or other lawsuits on similarly unfavorable terms, which could have a material adverse effect on our business, financial condition, results of operations or stock price.

We rely significantly on IT and any failure, inadequacy, interruption or security lapse of that technology, including any cybersecurity incidents, could harm our business and our ability to operate our business effectively.

We collect and maintain information in digital form that is necessary to conduct our business, and we are increasingly dependent on IT systems and infrastructure to operate our business. In the ordinary course of our business, we collect, store and transmit large amounts of confidential information, including intellectual property, proprietary business information and personal information of customers and our employees and contractors. However, our IT systems and those of our those of our users, customers, partners, suppliers and third-party service providers are vulnerable to attack and damage or interruption from computer viruses and malware (e.g. ransomware), malicious code, natural disasters, terrorism, war, telecommunication and electrical failures, hacking, cyberattacks, phishing attacks and other social engineering schemes, employee theft or misuse, human error, fraud, denial or degradation of service attacks, sophisticated nation-state and nation-state-supported actors or unauthorized
32


access or use by persons inside our organization, or persons with access to systems inside our organization. Attacks upon IT systems are also increasing in their frequency, levels of persistence, sophistication and intensity, and are being conducted by sophisticated and organized groups and individuals with a wide range of motives and expertise. For example, we have been and in the future may be the target of phishing and other scams and attacks. We have not always been successful in detecting these attacks, and while we have not experienced any significant loss or material expense as a result of these cybersecurity attacks or other information security breaches, there can be no assurance that we will not suffer additional attacks or incur material financial consequences or expense in the future. As a result of the COVID-19 pandemic, we may also face increased cybersecurity risks due to our reliance on internet technology and the number of our employees who are working remotely, which may create additional opportunities for cybercriminals to exploit vulnerabilities.

Cybersecurity attacks in particular are evolving and because the techniques used to obtain unauthorized access to, or to sabotage, systems change frequently and often are not recognized until launched against a target, we may be unable to anticipate these techniques or implement adequate preventative measures. We may experience security breaches that may remain undetected for an extended period. Even if identified, we may be unable to adequately investigate or remediate incidents or breaches due to attackers increasingly using tools and techniques that are designed to circumvent controls, to avoid detection, and to remove or obfuscate forensic evidence. There can be no assurance that our protective measures will prevent or detect security breaches that could have a significant impact on our business, reputation, financial condition and results of operations.

If such an event were to occur and cause interruptions in our operations, it could result in a material disruption of our development programs and our business operations due to a loss of our trade secrets and confidential information, negative publicity and damage to our reputation, loss of customers, loss of or delay in market acceptance of our products and services, loss of competitive position, loss of revenue or liability for damages or other similar disruptions. Depending on the nature of the attack, a successful attack may also bring into question our internal control over financial reporting. If a security breach or other incident were to result in the unauthorized access to or unauthorized use, disclosure, release or other processing of personal information, it may be necessary to notify individuals, governmental authorities, supervisory bodies, the media and other parties pursuant to privacy and security laws. Any security compromise affecting us, our customers, partners, suppliers, third-party service providers or our industry, whether real or perceived, could harm our reputation, erode confidence in the effectiveness of our security measures and lead to regulatory scrutiny. Furthermore, federal, state and international laws and regulations can expose us to enforcement actions and investigations by regulatory authorities, and potentially result in regulatory penalties, fines and significant legal liability, if our information technology security efforts fail. We may also be exposed to a risk of loss or litigation and potential liability, which could materially and adversely affect our business, results of operations or financial condition.

Our ability to effectively manage and maintain our internal business information, and to ship products and provide services to customers and invoice them on a timely basis, depends significantly on our enterprise resource planning system and other IT systems. Portions of our IT systems may experience interruptions, delays or cessations of service or produce errors in connection with ongoing systems implementation work. In addition, interfaces between our products and services and our customers’ computer networks could provide additional opportunities for cybersecurity attacks on us and our customers. The failure of these systems to operate or integrate effectively with other internal, customer, supplier or third-party service provider systems and to protect the underlying IT system and data integrity, including from cyberattacks, intrusions or other breaches or unauthorized access of these systems, or any failure by us to remediate any such attacks or breaches, may also result in damage to our reputation or competitiveness, delays in product fulfillment and reduced efficiency of our operations, and could require significant capital investments to remediate any such failure, problem or breach, all of which could adversely affect our business, financial condition and results of operations.

Any disruption of service at our third-party data and call centers or other cloud infrastructure services could interrupt or delay our ability to deliver our services to our customers.

Because our products and services are used by caregivers to monitor infants, it is critical that our products and services be accessible without interruption or degradation of performance. Customers may become dissatisfied by any system failure that interrupts our ability to provide our services to them. Sustained or repeated system failures would reduce the attractiveness of our products or services to customers. Moreover, negative publicity arising from these types of disruptions could damage our reputation and may adversely impact use of our products and services.

We currently host our products and services, serve our customers and support our operations in the U.S. primarily from third-party data and call centers and other cloud-based services. For example, we rely on cloud services and bespoke software services provided by Ayla Networks for our Owlet Smart Sock and Owlet Dream Sock products to support the transfer of data to the cloud and back to us and the user. Additionally, we rely on the data transfer services of ThroughTek to enable video viewing access for the Owlet Cam. We do not have control over the operations of the services or the facilities of any of those providers. These facilities are vulnerable to damage or
33


interruption from earthquakes, hurricanes, floods, fires, cyber security attacks, terrorist attacks, power losses, telecommunications failures and similar events. The occurrence of a natural disaster or an act of terrorism, a decision to close the facilities without adequate notice, or other unanticipated problems could result in lengthy interruptions in our services. The facilities also could be subject to break-ins, computer viruses, sabotage, intentional acts of vandalism and other misconduct. We may not be able to easily switch our cloud operations to another cloud provider if there are disruptions or interference with such providers.

None of our third-party cloud-based providers has an obligation to renew their agreements with us on commercially reasonable terms, or at all. If we are unable to renew our agreements with these providers on commercially reasonable terms, if our agreements with our providers are prematurely terminated, or if in the future we add additional cloud-based providers, we may experience costs or downtime in connection with the transfer to, or the addition of, new providers. If these providers were to increase the cost of their services, we may have to increase the price of our products and services, and our operating results may be materially adversely affected.

We are subject to a number of risks related to the credit extended by our manufacturing providers.

Our manufacturers extend credit to us and may revoke that credit. We use that credit to scale operations and increase production of our products. If our manufacturers revoke our credit, it could adversely affect our ability to meet demand for our products and adversely affect our business, financial condition and results of operations.

We are subject to a number of risks related to the credit card and debit card payments we accept.

We accept payments through credit and debit card transactions. For credit and debit card payments, we pay interchange and other fees, which may increase over time. An increase in those fees may require us to increase the prices we charge and would increase our operating expenses, either of which could have a material adverse effect on our business, financial condition and results of operations.

If we or our processing vendors fail to maintain adequate systems for the authorization and processing of credit and debit card transactions, it could cause one or more of the major credit card companies to disallow our continued use of their payment products. In addition, if these systems fail to work properly and, as a result, we do not charge our customers’ credit or debit cards on a timely basis, or at all, it could have a material adverse effect on our business, financial condition and results of operations.

The payment methods that we offer also subject us to potential fraud and theft by criminals, who are becoming increasingly more sophisticated in exploiting weaknesses that may exist in the payment systems. If we fail to comply with applicable rules or requirements for the payment methods we accept, or if payment-related data is compromised due to a breach, we may be liable for significant costs incurred by payment card issuing banks and other third parties or subject to fines and higher transaction fees, or our ability to accept or facilitate certain types of payments may be impaired. In addition, our customers could lose confidence in certain payment types, which may result in a shift to other payment types or potential changes to our payment systems that may result in higher costs. If we fail to adequately control fraudulent credit card transactions, we may face civil liability, diminished public perception of our security measures and significantly higher card-related costs, each of which could have a material adverse effect on our business, financial condition and results of operations.

We are also subject to payment card association operating rules, certification requirements and rules governing electronic funds transfers, which could change or be reinterpreted to make it more difficult for us to comply. We are subject to the Payment Card Industry Data Security Standard (“PCI DSS”) issued by the PCI Council, which includes guidelines with regard to the security policies and practices we should adopt regarding the physical and electronic storage, processing and transmission of cardholder data. Compliance with the PCI DSS and implementing related procedures, technology and information security measures requires significant resources and ongoing attention, and any security incident involving cardholder data could subject us to significant penalties and liability. Failure to comply with this standard may violate payment card association operating rules, federal and state laws and regulations and the terms of our contracts with payment processors. Any failure to comply fully also may subject us to fines, penalties, damages and civil liability, and may result in the loss of our ability to accept credit and debit card payments. Further, there is no guarantee that such compliance will prevent illegal or improper use of our payment systems or the theft, loss or misuse of data pertaining to credit and debit cards, cardholders and transactions.

If we are unable to maintain our chargeback rate or refund rates at acceptable levels, our processing vendor may increase our transaction fees or terminate its relationship with us. Any increases in our credit and debit card fees could harm our results of operations, particularly if we elect not to raise our rates for our products and services to offset the increase. The termination of our ability to process payments on any major credit or debit card would significantly impair our ability to operate our business.

34


We may need to raise additional capital in the future in order to execute our strategic plan, which may not be available on terms acceptable to us, or at all.

We have experienced recurring losses from operations and negative cash flows from operations, and we expect to continue operating at a loss for the foreseeable future. As of December 31, 2021, we had an accumulated deficit of $143.4 million and cash and cash equivalents of $95.1 million. We estimate that our available cash as of December 31, 2021 will be sufficient to meet our projected operating requirements for at least the next twelve months from the date the consolidated financial statements were issued.

We may still need additional funding to fund our operations, but additional funds may not be available to us on acceptable terms on a timely basis, if at all. We may seek funds through borrowings or through additional rounds of financing, including private or public equity or debt offerings, or by other means. Our future capital requirements will depend on many factors, including:
the timing, receipt and amount of sales from our current and future products and services;
the cost of manufacturing, either ourselves or through third party manufacturers, our products and services;
the cost and timing of expanding our sales, marketing and distribution capabilities;
the terms and timing of any other partnership, licensing and other arrangements that we may establish;
the costs and timing of securing regulatory approvals or certifications;
any product liability or other lawsuits related to our current or future products and services;
the expenses needed to attract, hire and retain skilled personnel;
the costs associated with being a public company;
the duration and severity of the COVID-19 pandemic and its impact on our business and financial markets generally;
the costs involved in preparing, filing, prosecuting, maintaining, defending and enforcing our intellectual property portfolio; and
the extent to which we acquire or invest in businesses, products or technologies.
The Warning Letter and the cessation of commercial distribution of the Owlet Smart Sock in the U.S. may have a material adverse effect on our ability to raise additional capital. Additional funds may not be available to us on acceptable terms on a timely basis, if at all.

If we raise additional funds through further issuances of equity or convertible debt securities, our existing stockholders could suffer significant dilution, and any new equity securities we issue could have rights, preferences, and privileges superior to those of holders of our common stock. If we are unable to obtain adequate financing or financing on terms satisfactory to us, when we require it, our ability to continue to pursue our business objectives and to respond to business opportunities, challenges, or unforeseen circumstances could be significantly limited, and our business, financial condition and results of operations could be materially adversely affected. We also could be required to seek funds through arrangements with partners or others that may require us to relinquish rights or jointly own some aspects of our technologies, products or services that we would otherwise pursue on our own.

Our loan and security agreement contains certain covenants and restrictions that may limit our flexibility in operating our business and any failure to satisfy those covenants and restrictions could adversely affect our business and financial condition.

Our loan and security agreement with Silicon Valley Bank (“SVB”) contains various affirmative and negative covenants and restrictions that limit our ability to engage in specific types of transactions, including:
conveying, selling, leasing, transferring, or otherwise disposing of certain assets;
consolidating, merging, selling or otherwise disposing of all or substantially all of our assets or acquiring all or substantially all of the capital stock or property of another person;
incurring specified types of additional indebtedness (including guarantees or other contingent obligations); and
paying dividends on, repurchasing or making distributions in respect of any capital stock or making other restricted payments, subject to specified exceptions.
In addition, under the loan and security agreement, we are required to satisfy and maintain certain financial ratios, including financial maintenance covenants. We obtained a waiver from SVB for a failure to maintain compliance with a financial covenant as of December 31, 2020, but cannot make assurances we will be able to satisfy these
35


requirements in the future or, if we fail to satisfy these requirements, that will be able to negotiate a waiver or amendment with SVB as we have in the past. A breach of any of these ratios or covenants, including as a result of events beyond our control, would result in a default under the loan and security agreement. Upon the occurrence of an event of default, SVB could elect to declare all amounts outstanding under the loan and security agreement immediately due and payable, terminate all commitments to extend further credit and pursue legal remedies for recovery, all of which could adversely affect our business and financial condition. As of December 31, 2021, $14.0 million in aggregate principal amount was outstanding under the loan. See Part II. Item 8. "Financial Statements and Supplementary Data - Note 6," included in this Report.

Discontinuation, reform or replacement of the “Prime Rate,” as calculated and published by The Wall Street Journal, and other benchmark rates, or uncertainty related to the potential for any of the foregoing, may adversely affect our business.

Regulators have suggested reforming or replacing certain benchmark rates, and the discontinuation, reform or replacement of the Prime Rate or any other benchmark rates may have an unpredictable impact on contractual mechanics in the credit markets or cause disruption to the broader financial markets. Uncertainty as to the nature of
such potential discontinuation, reform or replacement may also negatively impact interest expense related to borrowings under our loan and security agreement. Borrowings under our loan and security agreement bear interest either at the Prime Rate, or, if unavailable, at the rate announced by SVB as its prime rate in effect at its principal office in the State of California. We may in the future pursue amendments to our loan and security agreement to provide for a transition mechanism or other reference rate if the Prime Rate were discontinued, but we may not be able to reach agreement with our Lender on any such amendments. As a result, additional financing to replace any then-outstanding Prime Rate-based debt may be unavailable, more expensive or restricted by the terms of such outstanding indebtedness.

Changes in tax laws, including as a result of the 2020 U.S. presidential and congressional elections, may impact our future financial position and results of operations.

New income, sales, use or other tax laws, statutes, rules, regulations or ordinances could be enacted at any time, or interpreted, changed, modified or applied adversely to us, any of which could adversely affect our business operations and financial performance. In particular, the recent presidential and congressional elections in the U.S. could result in significant changes in, and uncertainty with respect to, tax legislation, regulation and government policy directly affecting our business or indirectly affecting us because of impacts on our customers and suppliers. For example, the U.S. government may enact significant changes to the taxation of business entities including, among others, an increase in the corporate income tax rate, an increase in the tax rate applicable to the global intangible low-taxed income and elimination of certain exemptions, and the imposition of minimum taxes or surtaxes on certain types of income. No specific U.S. tax legislation has been proposed at this time and the likelihood of these changes being enacted or implemented is unclear. We are currently unable to predict whether such changes will occur and, if so, the ultimate impact on our business. To the extent that such changes have a negative impact on us, our suppliers or our customers, including as a result of related uncertainty, these changes may materially and adversely affect our business, financial condition, results of operations and cash flows.

In addition, as we expand our business internationally, the application and implementation of existing, new or future international laws regarding indirect taxes (such as a Value Added Tax) could materially and adversely affect our business, financial condition and results of operations.

The applicability of sales, use and other tax laws or regulations on our business is uncertain. Adverse tax laws or regulations could be enacted or existing laws could be applied to us or our customers, which could subject us to additional tax liabilities and related interest and penalties, increase the costs of our products and adversely impact our business.

State, local and foreign tax jurisdictions have differing rules and regulations governing sales, use, value-added and other taxes, and these rules and regulations can be complex and are subject to varying interpretations that may change over time. Existing tax laws, statutes, rules, regulations, or ordinances could be interpreted, changed, modified, or applied adversely to us (possibly with retroactive effect).

One or more states, countries or other jurisdictions may seek to impose sales, use, value added or other tax collection obligations on us, including for past sales. A successful assertion by a state, country or other jurisdiction that we should have been or should be collecting additional sales, use, value added or other taxes on our products could, among other things, result in substantial tax liabilities for past sales, create significant administrative burdens for us, or otherwise harm our business, results of operations, and financial condition.

36


Our ability to use our net operating loss carryforwards and certain other tax attributes may be limited.

We have incurred substantial net operating losses (“NOLs”) since inception, and we may not achieve profitability in the future. U.S. federal and certain state NOLs generated in taxable years beginning after December 31, 2017 are not subject to expiration. U.S. federal NOLs generally may not be carried back to prior taxable years except that, under the Coronavirus Aid, Relief and Economic Security Act (the "CARES Act"), U.S. federal NOLs generated in 2018, 2019 and 2020 may be carried back to each of the five taxable years preceding the taxable year in which the loss arises. Additionally, for taxable years beginning after December 31, 2020, the deductibility of U.S. federal NOLs is limited to 80% of our taxable income in such taxable year. NOLs generated in tax years before 2018 may still be used to offset future taxable income without regard to the 80% limitation, although they have the potential to expire without being utilized if we do not achieve profitability in the future. However, under the rules of Sections 382 and 383 of the Internal Revenue Code of 1986, as amended (the “Code”), if a corporation undergoes an “ownership change,” generally defined as a greater than 50 percentage point change (by value) in its equity ownership over a rolling three-year period, the corporation’s ability to use its pre-change NOLs and other pre-change tax attributes to offset its post-change taxable income or taxes may be limited. The applicable rules generally operate by focusing on changes in ownership among stockholders considered by the rules as owning, directly or indirectly, 5% or more of the stock of a corporation, as well as changes in ownership arising from new issuances of stock by the corporation. If finalized, Treasury Regulations currently proposed under Section 382 of the Code may further limit our ability to utilize our pre-change NOLs or other pre-change tax attributes if we undergo a future ownership change. We could experience one or more ownership changes in the future, including in connection with this Merger and as a result of future changes in our stock ownership, some of which may be outside our control. As a result, if we earn net taxable income, our ability to use our pre-change NOL carryforwards to offset post-change taxable income may be subject to limitations. For these reasons, we may not be able to utilize a material portion of our NOLs and other tax attributes, which could adversely affect our future cash flows.

We have identified material weaknesses in our internal control over financial reporting and we may identify additional material weaknesses in the future or otherwise fail to maintain effective internal control over financial reporting, which may result in material misstatements of our consolidated financial statements, cause us to fail to meet our periodic reporting obligations, or cause our access to the capital markets to be impaired.

In connection with the reissuance of our consolidated financial statements as of and for the fiscal year ended December 31, 2019, we identified material weaknesses in our internal control over financial reporting. The identified material weaknesses in our internal control over financial reporting continued to exist as of December 31, 2021.

We did not design and maintain an effective control environment commensurate with our financial reporting requirements. Specifically, we did not maintain a sufficient complement of personnel with an appropriate degree of internal controls and accounting knowledge, experience, and training commensurate with our accounting and financial reporting requirements. This material weakness contributed to the following additional material weaknesses:
We did not design and maintain effective controls over the segregation of duties related to journal entries. Specifically, certain personnel have the ability to both create and post journal entries within the Company’s general ledger system. This material weakness did not result in any adjustments to the consolidated financial statements.
We did not design and maintain effective controls over the accounting for convertible preferred stock and warrant arrangements. Further, we did not design and maintain effective controls to verify the completeness and accuracy of sales returns and accrued sales tax. Each of these material weaknesses resulted in material adjustments to several account balances and disclosures in the consolidated financial statements as of and for the year ended December 31, 2019.
We did not design and maintain effective controls over IT general controls for information systems that are relevant to the preparation of our consolidated financial statements. Specifically, we did not design and maintain (i) program change management controls to ensure that IT program and data changes affecting financial IT applications and underlying accounting records are identified, tested, authorized and implemented appropriately, (ii) user access controls to ensure appropriate segregation of duties and that adequately restrict user and privileged access to financial applications, programs, and data to appropriate Company personnel, (iii) computer operations controls to ensure that critical batch jobs are monitored, and data backups are authorized and monitored, and (iv) testing and approval controls for program development to ensure that new software development is aligned with business and IT requirements. This material weakness did not result in any adjustments to the consolidated financial statements.
Additionally, each of the material weaknesses described above could result in a misstatement of one or more account balances or disclosures that would result in a material misstatement to the annual or interim consolidated financial statements that would not be prevented or detected.
37



See Part II. Item 9A. "Controls and Procedures" included in this Report for a discussion of our remediation plan to address these material weaknesses.

As a public company, we will be required pursuant to Section 404(a) of the Sarbanes-Oxley Act, subject to certain exceptions, to furnish a report by management on, among other things, the effectiveness of our internal control over financial reporting for each annual report on Form 10-K to be filed with the SEC. This assessment will need to include disclosure of any material weaknesses identified by our management in internal control over financial reporting. Once we cease to be an emerging growth company, our independent registered public accounting firm will also be required, pursuant to Section 404(b) of the Sarbanes-Oxley Act, to attest to the effectiveness of our internal control over financial reporting in each annual report on Form 10-K to be filed with the SEC. We are required to disclose material changes made in our internal control over financial reporting on a quarterly basis. Failure to comply with the Sarbanes-Oxley Act could potentially subject us to sanctions or investigations by the SEC, the stock exchange on which our securities are listed or other regulatory authorities, which would require additional financial and management resources. We have begun the costly and challenging process of compiling the system and processing documentation necessary to perform the evaluation needed to comply with Section 404, but we may not be able to complete our evaluation, testing and any required remediation in a timely fashion.

Risks Related to Regulation of Our Industry and Products

We are required to obtain and maintain marketing authorizations or certifications from the FDA, foreign regulatory authorities or notified bodies for medical device products in the U.S. or in foreign jurisdictions, which can be a lengthy and time-consuming process, and a failure to do so on a timely basis, or at all, could severely harm our business.

We are developing certain products, including the Owlet BabySat and Owlet OTC Smart Sock, that we believe are regulated as medical devices. Certain other products we are developing, such as the Owlet Band, may also be regulated as medical devices depending on their intended use. Although we do not believe the Owlet Dream Sock is a medical device, the FDA and other regulators may disagree, similar to the assertions they have made with respect to the regulatory status of the Owlet Smart Sock. For example, in response to inquiries from the FDA and regulatory authorities in other jurisdictions regarding the marketing of the Owlet Smart Sock, we have communicated our belief that the Owlet Smart Sock is not a medical device and does not require marketing authorization from the FDA or similar clearance, approval, certification, or other authorization from such other regulatory authorities. However, the FDA and certain other regulatory authorities have expressed they do not agree with that conclusion and have stated that we must obtain such marketing authorization, clearance, approval, and/or certification to continue to sell the product. The FDA sent us a Warning Letter on October 1, 2021 stating that the Owlet Smart Sock was an adulterated medical device being marketed without FDA approval, clearance or authorization, and requested that we stop commercial distribution of the Owlet Smart Sock. Pursuant to the FDA’s request, we ceased commercial distribution of the Owlet Smart Sock in the U.S. on October 21, 2021, and we plan to pursue marketing authorization for the features of the Owlet Smart Sock that the FDA believes make it a medical device.

Medical devices are subject to extensive regulation in the U.S. by local government, state government and the federal government, including by the FDA. The FDA regulates virtually all aspects of a medical device’s design, development, testing, manufacturing, labeling, storage, record keeping, reporting, sale, promotion, distribution and shipping. In the U.S., unless an exemption applies, any medical device that we seek to market in the U.S. must first undergo the FDA’s premarket review pursuant to the FDCA, and must receive the FDA’s marketing authorization either via clearance of a 510(k) premarket notification, de novo classification, or approval of a PMA application, depending on the type of device. In the 510(k) clearance process, before a device may be marketed, the FDA must determine that a proposed device is “substantially equivalent” to a legally-marketed “predicate” device. To be “substantially equivalent,” the proposed device must have the same intended use as the predicate device, and either have the same technological characteristics as the predicate device or have different technological characteristics and not raise different questions of safety or effectiveness than the predicate device. Clinical data are sometimes required to support substantial equivalence.

In the PMA process, the FDA must determine that a proposed device is safe and effective for its intended use based, in part, on extensive data, including, but not limited to, technical, pre-clinical, clinical trial, manufacturing and labeling data. The PMA process is typically required for devices that are deemed to pose the greatest risk, such as life-sustaining, life-supporting or implantable devices. However, some devices are automatically subject to the PMA pathway regardless of the level of risk they pose because they have not previously been classified into a lower risk class by the FDA. Manufacturers of these devices may request that the FDA review such devices in accordance with the de novo classification procedure, which allows a manufacturer whose novel device would otherwise require the submission and approval of a PMA prior to marketing to request down-classification of the device on the basis that the device presents low or moderate risk. If the FDA agrees with the down classification, the applicant will then
38


receive authorization to market the device. This device can then be used as a predicate device for future 510(k) submissions.

Modifications to products that are approved through a PMA application may require FDA approval. Similarly, certain modifications made to products cleared through a 510(k) premarket notification or de novo classification may require a new 510(k) clearance. The PMA approval, de novo classification, and the 510(k) clearance process can be expensive, lengthy and uncertain. The FDA’s 510(k) clearance process usually takes from three to 12 months, but can last longer. The process of obtaining a PMA is much more costly and uncertain than the 510(k) clearance process and generally takes from one to three years, or even longer, from the time the application is filed with the FDA. In addition, a PMA and de novo classification generally require the performance of one or more clinical trials, and a 510(k) clearance sometimes requires clinical data to support clearance. Despite the time, effort and cost, any particular device may not be authorized for marketing by the FDA. Any delay or failure to obtain necessary marketing authorizations could harm our business.

Even if marketing authorization is granted, such marketing authorization may be limited to only certain indications for use. Medical devices may be marketed only for the indications of use for which they are authorized. Additionally, the FDA might not grant marketing authorizations on a timely basis, if at all, for products or new uses of existing products that are regulated as medical devices and that are determined to require such marketing authorization. In addition, even if FDA marketing authorization is obtained, if safety or effectiveness problems are later identified with any medical device products, we may need to initiate a product recall.

To support any submissions to the FDA seeking marketing authorizations, we may be required to conduct clinical testing of our product candidates. Such clinical testing must be conducted in compliance with FDA requirements pertaining to research with human subjects. Among other requirements, we must obtain informed consent from study subjects and approval by institutional review boards (“IRB”) before such studies may begin. We must also comply with other FDA requirements such as monitoring, record-keeping, reporting and the submission of information regarding certain clinical trials to a public database maintained by the National Institutes of Health. In addition, if the study involves a significant risk device, we are required to obtain the FDA’s approval of the study under an Investigational Device Exemption (“IDE”). Compliance with these requirements can require significant time and resources. If the FDA determines that we have not complied with such requirements, the FDA may refuse to consider the data to support our submissions seeking marketing authorization or may initiate enforcement actions.

Moreover, clinical testing is expensive and can take many years to complete, and its outcome is inherently uncertain. Failure can occur at any time during the clinical trial process. The results of preclinical studies and early clinical trials may not be predictive of the results of later-stage clinical trials. Product candidates in later stages of clinical trials may fail to show the desired safety and efficacy traits despite having progressed through preclinical studies and initial clinical trials. A number of companies have suffered significant setbacks in advanced clinical trials due to lack of efficacy or adverse safety profiles, notwithstanding promising results in earlier trials. Our future clinical trial results may not be successful. We may also be delayed in our clinical trials, including as related to, among other things: obtaining authorization to initiate clinical trials; reaching agreement on acceptable terms with vendors, clinical trial sites, and contract research organizations; obtaining IRB approvals, recruiting subjects and having them complete the study; experiencing deviations from clinical trial protocols; and adding new clinical sites. We could encounter delays if a clinical trial is suspended or terminated due to a number of factors, including failure to conduct the clinical trial in accordance with regulatory requirements or our clinical protocols, inspection of the clinical trial operations or trial site by the FDA or other regulatory authorities resulting in the imposition of a clinical hold, unforeseen safety issues or adverse side effects, failure to demonstrate a benefit from using a drug, changes in governmental regulations or administrative actions or lack of adequate funding to continue the clinical trial. If we experience delays in the completion of, or termination of, any clinical trial of our medical device products we seek to develop, the commercial prospects of our proposed products will be harmed, and our ability to generate product revenues from any of these products will be delayed. In addition, any delays in completing our clinical trials will increase our costs, slow down our product development and jeopardize our ability to generate product sales and revenues.

In addition, we believe that some of the products we plan to market could be subject to an FDA enforcement discretion policy, meaning that even if the products are medical devices, they are not subject to FDA premarket or postmarket regulatory requirements. For example, the FDA has established a compliance policy for certain products that may fall within the definition of a medical device, but that are intended for only “general wellness use” and present a low risk to the safety of users and other persons. The FDA defines a “general wellness use” to be (i) an intended use that relates to maintaining or encouraging a general state of health or a healthy activity, or (ii) an intended use that relates the role of healthy lifestyle with helping to reduce the risk or impact of certain chronic diseases or conditions and where it is well understood and accepted that healthy lifestyle choices may play an important role in health outcomes for the disease or condition. The FDA identifies sleep management – such as a product intended to track sleep trends – as an intended use of a product that falls within a general wellness use, provided that the product claims do not make reference to any diseases or conditions. Specifically, the FDA has
39


issued guidance explaining that for such low-risk products, FDA does not intend to examine whether the product constitutes a medical device, and if the product is a medical device, whether the product complies with the premarket review and post-market regulatory requirements of the FDCA. As such, if a medical device falls within the definition of a “low risk general wellness product,” the product may nevertheless be subject to enforcement discretion under the FDA’s compliance policy for such products, meaning that the FDA will not enforce its medical device authorities with respect to that product. To the extent that we pursue the marketing of any products as a “low risk general wellness product,” the FDA may disagree that the product qualifies and may determine that the product is a medical device requiring marketing authorization. If the FDA makes this determination with respect to any product that we believe is a device but qualifies for enforcement discretion, we could be required to cease commercial distribution of the product or recall the product pending receipt of any required marketing authorization, and we could be subject to enforcement action, litigation, and negative publicity as a result, any of which could materially, adversely affect our business.

The FDA’s interpretations of its laws and regulations are subject to change. If the FDA changes its policy or concludes that the marketing of any of our products is not in accordance with current policies, regulations or statutory requirements, or if the FDA changes its applicable policies or if changes are introduced to applicable laws or regulations, we may be required to seek clearance or approval or other marketing authorization for these products through the 510(k), de novo classification or PMA processes, may not be permitted to continue marketing these products until marketing authorization is obtained, or may be the subject of regulatory enforcement actions or recalls.

Disruptions at the FDA, other agencies or notified bodies caused by funding shortages or global health concerns could hinder their ability to hire, retain, or deploy key leadership and other personnel, or otherwise prevent new or modified products from being developed, cleared or approved, or commercialized in a timely manner, or at all, which could negatively impact our business.

The ability of the FDA, other agencies and notified bodies to review and authorize or certify for marketing new products can be affected by a variety of factors, including government budget and funding levels, statutory, regulatory and policy changes, agency’s or notified body's ability to hire and retain key personnel and accept the payment of user fees, and other events that may otherwise affect the agency’s or notified body's ability to perform routine functions. Average review times at the FDA and other agencies and notified bodies have fluctuated in recent years as a result. In addition, government funding of other government agencies that fund research and development activities is subject to the political process, which is inherently fluid and unpredictable. Disruptions at the FDA, other agencies and notified bodies may also slow the time necessary for new medical devices or modifications to be reviewed and/or cleared, approved or certified by necessary agencies or notified bodies, which would adversely affect our business. For example, over the last several years, the U.S. government has shut down several times and certain regulatory agencies, such as the FDA, have had to furlough critical FDA employees and stop critical activities.

Separately, in response to the COVID-19 pandemic, in March 2020, the FDA announced its intention to postpone most inspections of foreign manufacturing facilities, and on March 18, 2020, the FDA temporarily postponed routine surveillance inspections of domestic manufacturing facilities. Subsequently, in July 2020, the FDA resumed certain on-site inspections of domestic manufacturing facilities subject to a risk-based prioritization system. The FDA utilized this risk-based assessment system to assist in determining when and where it was safest to conduct prioritized domestic inspections. In May 2021, the FDA outlined a detailed plan to move toward a more consistent state of inspectional operations, and in July 2021, the FDA resumed standard inspectional operations of domestic facilities and was continuing to maintain this level of operation as of September 2021. More recently, the FDA has continued to monitor and implement changes to its inspectional activities to ensure the safety of its employees and those of the firms it regulates as it adapts to the evolving COVID-19 pandemic. Regulatory authorities outside the U.S. have adopted similar restrictions or other policy measures in response to the COVID-19 pandemic. If a prolonged government shutdown occurs, or if global health concerns continue to hinder or prevent the FDA or other regulatory authorities from conducting their regular inspections, reviews, or other regulatory activities, it could significantly impact the ability of the FDA or other regulatory authorities to timely review and process our regulatory submissions, which could have a material adverse effect on our business.

In the EU, notified bodies must be officially designated to certify products and services in accordance with the MDR. While several notified bodies have been designated the COVID-19 pandemic has significantly slowed down their designation process and the current designated notified bodies are facing a large amount of requests with the new regulation as a consequence of which review times have lengthened. This situation could significantly impact the ability of notified bodies to timely review and process our regulatory submissions, which could have a material adverse effect on our business in the EU and European Economic Area (which consists of the 27 EU member states plus Norway, Liechtenstein and Iceland).

40


We are expanding into international markets and we will be required to obtain and maintain regulatory authorizations, including clearances or approvals, or other certifications in order to commercialize certain of our products in certain international markets. Failure to obtain such regulatory authorizations or certifications in relevant foreign jurisdictions may prevent us from marketing medical device products abroad.

We currently market and intend to continue to market our products and services internationally. We expect certain of our pipeline products to be regulated as medical devices, and we have received communications from certain regulatory authorities inquiring as to the regulatory status of our Owlet Smart Sock, and whether such product is regulated as a medical device in such jurisdictions. In these communications, some regulatory authorities have asserted that the Owlet Smart Sock is a medical device that must comply with medical device requirements in those jurisdictions. For example, Health Canada, Canada's medical device regulatory authority, has also determined that the Smart Sock meets the definition of a medical device that requires a medical device license. We plan to pursue a medical device license for the Owlet Smart Sock from Health Canada.

In addition, the MHRA, the regulatory authority responsible for the UK medical device market, has asserted that the Owlet Smart Sock requires certification by a notified body and subsequent registration as a medical device in the UK, but has indicated it will allow us to continue to market the Owlet Smart Sock until the end of 2022 without such certification or registration. We plan to pursue such certification and registration for the Owlet Smart Sock in the UK, but we may not be able to obtain certification of the Owlet Smart Sock by a notified body and subsequent registration as a medical device in the UK before the end of 2022, at which point we would be required to cease marketing the Owlet Smart Sock in the UK, unless the MHRA grants us an extension.

Elsewhere in Europe, we can generally market a medical device only if we receive a certification by a notified body, i.e., an independent organization accredited or designated by an EU member state or a marketing authorization from other foreign regulatory authorities (and meet certain pre-marketing requirements) and, in some cases, pricing approval, from the appropriate regulatory authorities. The path to market varies among international jurisdictions and may require additional or different product testing than required to obtain FDA marketing authorization. We may be unable to obtain foreign certifications or marketing authorizations on a timely basis, if at all, and we may also incur significant costs in attempting to obtain foreign certifications or marketing authorizations.

In order to sell medical devices in the EU, products must comply with the general safety and performance requirements of the EU Medical Devices Regulation (2017/745 or “MDR”). Compliance with these requirements is a prerequisite to be able to affix the European Conformity (“CE”) mark to medical devices, without which they cannot be sold or marketed in the EU. All medical devices placed on the market in the EU must meet the general safety and performance requirements laid down in Annex I to the MDR including the requirement that a medical device must be designed and manufactured in such a way that, during normal conditions of use, it is suitable for its intended purpose. Medical devices must be safe and effective and must not compromise the clinical condition or safety of patients, or the safety and health of users and – where applicable – other persons, provided that any risks which may be associated with their use constitute acceptable risks when weighed against the benefits to the patient and are compatible with a high level of protection of health and safety, taking into account the generally acknowledged state of the art. To demonstrate compliance with the general safety and performance requirements, we must undergo a conformity assessment procedure, which varies according to the type of medical device and its (risk) classification. Except for low risk medical devices (Class I), where the manufacturer can self-assess the conformity of its products with the general safety and performance requirements (except for any parts which relate to sterility, metrology or reuse aspects), a conformity assessment procedure requires the intervention of a notified body. The notified body would typically audit and examine the technical file and the quality system for the manufacture, design and final inspection of our devices. If satisfied that the relevant product conforms to the relevant general safety and performance requirements, the notified body issues a certificate of conformity, which the manufacturer uses as a basis for its own declaration of conformity. The manufacturer may then apply the CE mark to the device, which allows the device to be placed on the market throughout the EU. If we fail to comply with applicable laws and regulations, we would be unable to affix the CE mark to any medical devices, which would prevent us from selling them within the EU. These modifications are likely to have an effect on the way we conduct our business in the EU. For example, as a result of the transition towards the new regime, notified body review times have lengthened, and product future introductions or modifications could be delayed or canceled, which could adversely affect our ability to grow our business and our future products. The aforementioned EU rules are generally applicable in the EEA. Non-compliance with the above requirements would also prevent us from selling medical devices in these countries.

In addition, marketing authorization by the FDA does not ensure marketing authorization, including clearance or approval, or other certification by foreign regulatory authorities or notified bodies. However, a failure to obtain such marketing authorization by the FDA may have a negative impact on our ability to obtain any necessary marketing authorizations, including clearances or approvals, or similar certifications in foreign jurisdictions. Moreover, certifications or marketing authorizations from one foreign regulatory authority or notified body does not ensure certification or marketing authorization by any other foreign regulatory authority or notified body or by the FDA. If we fail to receive necessary certifications or marketing authorizations to commercialize our products in foreign
41


jurisdictions on a timely basis, or at all, or if we later lose such certifications or marketing authorizations, our business, financial condition and results of operations could be adversely affected. Furthermore, foreign regulatory requirements may change from time to time, which could adversely affect our ability to market new products and services, or continue to market existing products and services, internationally.

As a result of Brexit, the EU MDR will not be implemented in the UK, and previous legislation that mirrored the EU MDR in the UK law has been revoked. The regulatory regime for medical devices in Great Britain (England, Scotland and Wales) will continue to be based on the requirements derived from current EU legislation, and the UK may choose to retain regulatory flexibility or align with the EU MDR going forward. CE markings will continue to be recognized in the UK, and certificates issued by EU-recognized notified bodies will be valid in the UK, until June 30, 2023. For medical devices placed on the market in Great Britain after this period, the UKCA, marking will be mandatory. In contrast, UKCA marking and certificates issued by UK notified bodies will not be recognized on the EU market. The TCA does provide for cooperation and exchange of information in the area of product safety and compliance, including market surveillance, enforcement activities and measures, standardization related activities, exchanges of officials, and coordinated product recalls (or other similar actions). For medical devices that are locally manufactured but use components from other countries, the “rules of origin” criteria will need to be reviewed. Depending on which countries products will be ultimately sold in, manufacturers may start seeking alternative sources for components if this would allow them to benefit from no tariffs. The rules for placing medical devices on the Northern Ireland market will differ from those in Great Britain.

We have relied and expect to continue to rely on third parties to conduct our nonclinical and clinical studies and perform other tasks for us. If these third parties do not successfully carry out their contractual duties, meet expected deadlines, or comply with regulatory requirements, we may not be able to obtain marketing authorization or other required certifications to commercialize our medical device products and our business could be substantially harmed.

We have relied upon and plan to continue to rely upon third parties for execution of our nonclinical and clinical studies, and we control only certain aspects of their activities. Nevertheless, we are responsible for ensuring that each of our studies is conducted in accordance with the applicable protocol, legal, regulatory, and scientific standards and our reliance on third parties does not relieve us of our regulatory responsibilities. We and our third party contractors may be required to comply with Good Clinical Practice (“GCP”) requirements and Good Laboratory Practice requirements which are regulations and guidelines enforced by the FDA and other regulatory authorities for the conduct of certain clinical and nonclinical studies, respectively. Regulatory authorities enforce these regulations through periodic inspections of study sponsors, principal investigators, study sites, and other contractors. If we or any of our third party contractors fail to comply with applicable regulations, the data generated in our studies may be deemed unreliable and the FDA and other regulatory authorities or bodies may require us to perform additional nonclinical and clinical studies before issuing any marketing authorizations or other certifications for any medical device products we seek to market. Upon inspection by a given regulatory authority, such regulatory authority may determine that our clinical studies do not comply with GCP regulations. Our or our third party contractors’ failure to comply with these regulations may require us to repeat clinical studies, which would delay or prevent any required marketing authorization or similar certification from being granted.

If any of our relationships with these third parties terminate, we may not be able to enter into arrangements with alternative third parties or do so on commercially reasonable terms. In addition, our contractors are not our employees, and except for remedies available to us under our agreements with them, we cannot control whether or not they devote sufficient time and resources to our development programs. If these third parties do not successfully carry out their contractual duties or obligations or meet expected deadlines, if they need to be replaced or if the quality or accuracy of the data they obtain is compromised due to the failure to adhere to our protocols, regulatory requirements, or for other reasons, our studies may be extended, delayed, or terminated and we may not be able to obtain marketing authorizations or other required certifications to successfully commercialize our proposed medical device products. Third parties may also generate higher costs than anticipated. As a result, our results of operations and the commercial prospects for our proposed products would be harmed, our costs could increase, and our ability to generate revenue could be delayed.

We rely on third parties to manufacture our products. Failure of those third parties to provide us with sufficient quantities of our products, in compliance with applicable regulatory requirements, or to do so at acceptable quality levels or prices could adversely impact our business.

We do not currently have nor do we plan to acquire the infrastructure or capability internally to completely manufacture our commercial products or our development-stage products, and we lack the resources and the capability to manufacture any of our current or future products in the future. We do not control the manufacturing process of, and are completely dependent on, our contract manufacturing partners for compliance with applicable regulatory requirements for any medical device products we seek to market. For example, the FDA requires
42


adherence to current good manufacturing practice requirements for medical devices, known as the Quality System Regulation (“QSR”). If our contract manufacturers cannot successfully manufacture material that conforms to our specifications and the strict regulatory requirements of the FDA or other regulators, our products may not be able to be lawfully marketed. In addition, we have no control over the ability of our contract manufacturers to maintain adequate quality control, quality assurance and qualified personnel. If the FDA or a comparable foreign regulatory authority or notified body does not consider these facilities adequate for the manufacture of our products, we may need to find alternative manufacturing facilities, which would significantly impact our ability to develop, obtain marketing authorization or similar certification for or to market any medical device products we may seek to develop and commercialize.

We rely on third-party manufacturers to purchase from third-party suppliers the materials necessary to produce our products. There are a limited number of suppliers for raw materials that are used in the manufacture of our products and that we anticipate will be able to supply materials for the production of our future products, and there may be a need to assess alternate suppliers to prevent a possible disruption of the manufacture of the materials. We do not have any control over the process or timing of the acquisition of these raw materials by our manufacturers. If our manufacturers or we are unable to purchase these raw materials, the commercial launch of any medical device products we may seek to develop would be delayed or there would be a shortage in supply, which would impair our ability to generate revenues from the sale of such products, if authorized for marketing.

We expect to continue to depend on third-party contract manufacturers for the foreseeable future. We have not entered into long-term agreements with our current contract manufacturers or with any alternate suppliers, and we may be unable to enter into such an agreement or do so on commercially reasonable terms.

Regulatory reforms may impact our ability to develop and commercialize our products and services and technologies.

From time to time, legislation is drafted and introduced that could significantly change the regulatory frameworks governing our products and services. In addition, regulations and guidance are often revised or reinterpreted by the government agency in ways that may significantly affect our business or products and services. FDA requirements related to digital health have evolved over time as the FDA has gained additional experience with these kinds of products and modified its approach to regulation in light of changes to its statutory authority. For example, in 2016, the 21st Century Cures Act was enacted to, among other things, amend the FDCA to remove certain software functions from the definition of a “device.” The FDA also issued guidance in 2016, which was updated in 2019, establishing a policy of enforcement discretion for certain low risk general wellness products, including certain such products with software functions. The FDA’s approach to digital health continues to evolve. Any new statutes, regulations, or policies, or revisions or reinterpretations of existing statutes, regulations, or policies, including those in the digital health area, may increase our costs or subject us to additional regulation or the need for marketing authorization or similar certification requirements for our products, or may lengthen review times of certain products or make it more difficult to obtain clearance or approval for, manufacture, market or distribute such products.

We cannot predict the likelihood, nature, or extent of the impact on our business of any legislation, regulations, or reinterpretations thereof that may be enacted or adopted in the future. However, future regulatory changes could make it more difficult for us to obtain or maintain any necessary marketing authorization or certification for our products and services, or to develop and commercialize future medical devices and technologies.  If we are slow or unable to adapt to changes in existing requirements or the adoption of new requirements or policies, or if we are not able to maintain regulatory compliance, we would not be able to market the affected products and may lose any marketing authorizations or certifications that we may have obtained, which could materially and adversely affect our business, financial condition, results of operations and growth prospects.

Promotion of any medical devices using claims that are off-label, unsubstantiated, false or misleading could subject us to substantial penalties and enforcement action.

Obtaining FDA or foreign regulatory authorities marketing authorization or notified bodies certification would permit us to promote the subject medical device only for the specific use(s) cleared, approved, certified or otherwise authorized by the FDA, foreign regulatory authorities or notified bodies. Use of a medical device outside its authorized or certified indications is known as “off-label” use. Although physicians may use any medical devices we market off-label because the FDA and foreign regulatory authorities do not restrict or regulate a physician’s choice of treatment within the practice of medicine, we are prohibited from marketing or promoting any medical devices for off-label use. While we may pursue FDA or foreign regulatory authorities marketing authorizations or notified bodies certifications for certain indications for any medical devices we seek to market, the FDA or foreign regulatory authorities or notified bodies may deny those requests, require additional expensive clinical data to support any additional indications or impose limitations on the intended use of any authorized or certified product as a condition of marketing authorization or certification. If the FDA or foreign regulatory authorities determine that
43


our products authorized or certified for marketing as medical devices were promoted for off-label use, or that false, misleading or inadequately substantiated promotional claims have been made by us or our commercial partners, it could request that we or our commercial partners modify those promotional materials or take regulatory or enforcement actions, including the issuance of an untitled letter or warning letter, injunction, seizure, civil fine and criminal penalties.

It is also possible that other federal, state or foreign enforcement authorities may take action if they consider our communications, including promotional or training materials, to constitute promotion of an uncleared, uncertified or unapproved use of a medical device. If not successfully defended, enforcement actions related to off-label promotion could result in significant fines or penalties under other statutory authorities, such as laws prohibiting false claims for reimbursement. In any such event, our reputation could be damaged, adoption of our products could be impaired and we could be subject to extensive fines and penalties.

Additionally, we must have adequate substantiation for the claims we make for our products and services. If any of our claims are determined to be false, misleading or deceptive, our products and services could be considered misbranded under the FDCA or in violation of the Federal Trade Commission Act. We could also face lawsuits from our competitors under the Lanham Act alleging that our marketing materials are false or misleading.

Foreign jurisdictions have their own laws and regulations concerning medical device marketing authorizations and certifications, including communications, claims and promotional or training materials surrounding those medical devices. Failure to comply with those laws and regulations could result in actions against us, including fines, penalties and exclusion from the market. Any such actions could adversely affect our ability to market new products and services or continue to market existing products and services in those jurisdictions.

If we or our suppliers fail to comply with ongoing regulatory requirements, or if we experience unanticipated problems with our products and services, these products and services could be subject to restrictions or withdrawal from the market. Our actual or perceived failure to comply with such obligations could harm our business, and changes in such regulations or laws could require us to modify our products and services or marketing or advertising efforts.

Our products and services, along with the manufacturing processes, labeling and promotional activities for our products and services, may be subject to continual review by the FDA, the U.S. Federal Trade Commission (“FTC”), the U.S. Consumer Product Safety Commission (“CPSC”) or other regulatory bodies, including their counterparts in international jurisdictions, depending on the product and whether such product is a medical device.
Failure by us or one of our suppliers to comply with statutes and regulations administered by any of these regulatory bodies that are applicable to any medical devices we market, or with any applicable statutes and regulations administered by other regulatory bodies, could result in, among other things, any of the following:
warning letters or untitled letters issued by the FDA or FTC and their counterparts in international jurisdictions;
litigation, fines, civil penalties, in rem forfeiture proceedings, injunctions, consent decrees and criminal prosecution;
import alerts and holds;
unanticipated expenditures to address or defend such actions;
delays in clearing, approving, authorizing, or certifying, or refusal to clear, approve, authorize, or certify, our products, where applicable;
withdrawals or suspensions of clearance, approval, authorization or certification of our products or those of our third-party suppliers by the FDA or other regulatory authorities or notified bodies, where applicable;
product recalls or seizures;
adverse publicity;
orders for device repair, replacement or refund;
interruptions of production or inability to export to certain foreign countries; and
operating restrictions.
If any of these items were to occur, it would harm our reputation and adversely affect our business, financial condition and results of operations.

44


Changes in and failures to comply with U.S. and foreign privacy and data protection laws, regulations and standards may adversely affect our business, operations and financial performance.

The global data protection landscape is rapidly evolving, and we are or may become subject to numerous state, federal and foreign laws, requirements and regulations governing the collection, use, disclosure, retention, and security of health-related and other personal information, including information we collect about children and infants, their parents and other consumers who purchase our products and services, as well as information that we may now or in the future collect in connection with clinical trials in the U.S. and abroad. Implementation standards and enforcement practices are likely to remain uncertain for the foreseeable future, and we cannot yet determine the impact future laws, regulations, standards, or perception of their requirements may have on our business. This evolution may create uncertainty in our business, affect our ability to operate in certain jurisdictions or to collect, store, transfer, use and share personal information, necessitate the acceptance of more onerous obligations in our contracts, result in liability or impose additional costs on us. The cost of compliance with these laws, regulations and standards is high and is likely to increase in the future. Any failure or perceived failure by us to comply with federal, state or foreign laws or regulations, our internal policies and procedures, or our contracts governing our processing of personal information could result in negative publicity, government investigations and enforcement actions, claims by third parties and damage to our reputation, any of which could have a material adverse effect on our operations, financial performance and business.

As our operations and business grow, we may become subject to or affected by new or additional data protection laws and regulations and face increased scrutiny or attention from regulatory authorities. In the U.S., the Health Insurance Portability and Accountability Act, as amended by the Health Information Technology for Economic and Clinical Health Act of 2009, and regulations promulgated thereunder (collectively, “HIPAA”) imposes, among other things, certain standards relating to the privacy, security, transmission and breach reporting of individually identifiable health information. Certain states have also adopted comparable privacy and security laws and regulations, which govern the privacy, processing and protection of health-related and other personal information and some of which may be more stringent than HIPAA. Such laws and regulations will be subject to interpretation by various courts and other governmental authorities, thus creating potentially complex compliance issues for us and our future customers and strategic partners.

For example, the California Consumer Privacy Act (“CCPA”) went into effect on January 1, 2020. The CCPA creates individual privacy rights for California consumers and increases the privacy and security obligations of entities handling certain personal data. The CCPA provides for civil penalties for violations, as well as a private right of action for data breaches that is expected to increase data breach litigation. The CCPA may increase our compliance costs and potential liability, and many similar laws have been proposed at the federal level and in other states. Further, the California Privacy Rights Act (“CPRA”) recently passed in California. The CPRA significantly amends the CCPA and will impose additional data protection obligations on covered businesses, including additional consumer rights processes, limitations on data uses, new audit requirements for higher risk data, and opt outs for certain uses of sensitive data. It will also create a new California data protection agency authorized to issue substantive regulations and could result in increased privacy and information security enforcement. The majority of the provisions will go into effect on January 1, 2023, and additional compliance investment and potential business process changes may be required. Similar laws have passed in Virginia and Colorado, and have been proposed in other states and at the federal level, reflecting a trend toward more stringent privacy legislation in the U.S. The enactment of such laws could have potentially conflicting requirements that would make compliance challenging. In the event that we are subject to or affected by HIPAA, the CCPA, the CPRA or other domestic privacy and data protection laws, any liability from failure to comply with the requirements of these laws could adversely affect our financial condition.

Furthermore, the FTC and many state Attorneys General continue to enforce federal and state consumer protection laws against companies for online collection, use, dissemination and security practices that appear to be unfair or deceptive. For example, according to the FTC, failing to take appropriate steps to keep consumers’ personal information secure can constitute unfair acts or practices in or affecting commerce in violation of Section 5(a) of the Federal Trade Commission Act. The FTC expects a company’s data security measures to be reasonable and appropriate in light of the sensitivity and volume of consumer information it holds, the size and complexity of its business, and the cost of available tools to improve security and reduce vulnerabilities.

We are also or may become subject to rapidly evolving data protection laws, rules and regulations in foreign jurisdictions. For example, the European Union General Data Protection Regulation (“GDPR”) went into effect in May 2018 and imposes strict requirements for processing the personal data of individuals within the EEA. The GDPR imposes strict obligations on the ability to process health-related and other personal data of individuals within the EEA, including in relation to use, collection, analysis, and transfer (including cross-border transfer) of such personal data. The law is also developing rapidly and, in July 2020, the Court of Justice of the EU (“CJEU”) limited how organizations could lawfully transfer personal data from the EEA to the U.S. While the CJEU upheld the adequacy of the standard contractual clauses (a standard form of contract approved by the European Commission as
45


an adequate personal data transfer mechanism), it made clear that reliance on them alone may not necessarily be sufficient in all circumstances. Use of the standard contractual clauses must now be assessed on a case-by-case basis taking into account the legal regime applicable in the destination country, in particular applicable surveillance laws and rights of individuals and additional measures and/or contractual provisions may need to be put in place, however, the nature of these additional measures is currently uncertain. The CJEU went on to state that if a competent supervisory authority believes that the standard contractual clauses cannot be complied with in the destination country and the required level of protection cannot be secured by other means, such supervisory authority is under an obligation to suspend or prohibit that transfer. The European Commission has published revised standard contractual clauses (“SCCs”) for data transfers from the EEA: the revised clauses must be used for relevant new data transfers from September 27, 2021; existing standard contractual clauses arrangements must be migrated to the revised clauses by December 27, 2022. We will be required to implement the revised SCCs, in relation to relevant existing contracts and certain additional contracts and arrangements, within the relevant time frames. Further, the new SCCs apply only to the transfer of personal data outside of the EEA and not the UK; the UK’s Information Commissioner’s Office launched a public consultation on its draft revised data transfers mechanisms in August 2021 and laid its proposal before Parliament, with the UK SCCs expected to come into force in March 2022, with a two-year grace period. There is some uncertainty around whether the revised clauses can be used for all types of data transfers, particularly whether they can be relied on for data transfers to non-EEA entities subject to the GDPR. As supervisory authorities issue further guidance on personal data export mechanisms, including circumstances where the SCCs cannot be used, and/or start taking enforcement action, we could suffer additional costs, complaints and/or regulatory investigations or fines, and/or if we are otherwise unable to transfer personal data between and among countries and regions in which we operate, it could affect the manner in which we provide our services, the geographical location or segregation of our relevant systems and operations, and could adversely affect our financial results.

In addition, EU and EEA Member States may impose further obligations relating to the processing of genetic, biometric or health data, which could further add to our compliance costs and limit how we process this information. Companies that must comply with the GDPR face increased compliance obligations and risk, including more robust regulatory enforcement of data protection requirements and potential fines for noncompliance of up to €20 million or 4% of the annual global revenues of the noncompliant company, whichever is greater. Further, from January 1, 2021, we have to comply with the GDPR and also the UK GDPR (“UK GDPR”), which, together with the amended United Kingdom Data Protection Act 2018, retains the GDPR in UK national law. The UK GDPR mirrors the fines under the GDPR, e.g. fines up to the greater of €20 million (£17.5 million) or 4% of global turnover. The European Commission has adopted an adequacy decision in favor of the UK, enabling data transfers from EU member states to the UK without additional safeguards. However, the UK adequacy decision will automatically expire in June 2025 unless the European Commission re-assesses and renews or extends that decision, and remains under review by the Commission during this period. The relationship between the UK and the EU in relation to certain aspects of data protection law remains unclear, and it is unclear how UK data protection laws and regulations will develop in the medium to longer term, and how data transfers to and from the UK will be regulated in the long term. Furthermore, other international jurisdictions, including Singapore, South Korea, China, Brazil, Mexico and Australia, have also implemented laws relating to data privacy and protection.

Although we work to comply with applicable laws, regulations and standards, our contractual obligations and other legal obligations, these requirements are evolving and may be modified, interpreted and applied in an inconsistent manner from one jurisdiction to another, and may conflict with one another or other legal obligations with which we must comply. Any failure or perceived failure by us or our employees, representatives, contractors, consultants, collaborators, or other third parties to comply with such requirements or adequately address privacy and security concerns, even if unfounded, could result in additional cost and liability to us, damage our reputation, and adversely affect our business and results of operations.

To the extent we market any medical devices or other healthcare products and services, our relationships with customers, physicians and third-party payors may be subject, directly or indirectly, to federal, state and foreign healthcare fraud and abuse laws, false claims laws, and other healthcare laws and regulations. If we or our employees, independent contractors, consultants, commercial partners, or vendors violate these laws, we could face substantial penalties.

To the extent we market any medical devices or other healthcare products and services, our relationships with customers, physicians, and third-party payors may be subject, directly or indirectly, to federal, state and foreign healthcare fraud and abuse laws, false claims laws, and other healthcare laws and regulations. These laws may impact, among other things, our proposed and future sales, marketing, and education programs. In particular, the promotion, sales and marketing of healthcare items and services is subject to extensive laws and regulations designed to prevent fraud, kickbacks, self-dealing, and other abusive practices. These laws and regulations may restrict or prohibit a wide range of pricing, discounting, marketing and promotion, sales commission, customer incentive, and other business arrangements. We may also be subject to federal, state and foreign laws governing the
46


privacy and security of identifiable patient information. The U.S. healthcare laws and regulations that may affect our ability to operate include, but are not limited to:
the federal Anti-Kickback Statute, which prohibits, among other things, any person or entity from knowingly and willfully offering, paying, soliciting or receiving any remuneration, directly or indirectly, overtly or covertly, in cash or in kind, to induce, or in return for, the purchasing, leasing, ordering or arranging for the purchase, lease, or order of any item or service reimbursable under Medicare, Medicaid or other federal healthcare programs. The term “remuneration” has been broadly interpreted to include anything of value. A person or entity does not have to have actual knowledge of this statute or specific intent to violate it to have committed a violation;
federal civil and criminal false claims laws, including the federal civil False Claims Act, and civil monetary penalty laws, which prohibit, among other things, individuals or entities from knowingly presenting, or causing to be presented, claims for payment or approval from Medicare, Medicaid, or other federal government programs that are false or fraudulent or knowingly making a false statement to improperly avoid, decrease or conceal an obligation to pay money to the federal government, including federal healthcare programs. In addition, the government may assert that claim includes items or services resulting from a violation of the federal Anti-Kickback Statute constitutes a false or fraudulent claim for purposes of the false claims statute;
HIPAA, which created new federal civil and criminal statutes that prohibit knowingly and willfully executing, or attempting to execute, a scheme to defraud any healthcare benefit program or obtain, by means of false or fraudulent pretenses, representations, or promises, any of the money or property owned by, or under the custody or control of, any healthcare benefit program, including private third-party payors and knowingly and willfully falsifying, concealing or covering up by any trick, scheme or device, a material fact or making any materially false, fictitious or fraudulent statements in connection with the delivery of, or payment for, healthcare benefits, items or services. Similar to the federal Anti-Kickback Statute, a person or entity does not have to have actual knowledge of this statute or specific intent to violate it to have committed a violation;
the federal Physician Payments Sunshine Act, which requires certain manufacturers of drugs, devices, biologicals and medical supplies for which payment is available under Medicare, Medicaid or the Children’s Health Insurance Program (with certain exceptions) to report annually to CMS information related to payments or other transfers of value made to physicians (defined to include doctors, dentists, optometrists, podiatrists and chiropractors), certain non-physician practitioners (nurse practitioners, certified nurse anesthetists, physician assistants, clinical nurse specialists, anesthesiology assistants and certified nurse midwives), and teaching hospitals, as well as ownership and investment interests held by physicians and their immediate family members;
federal consumer protection and unfair competition laws, which broadly regulate marketplace activities and activities that potentially harm consumers; and
state and foreign equivalents of each of the healthcare laws described above, some of which may be broader in scope.
Because of the breadth of these laws and the narrowness of the statutory exceptions and regulatory safe harbors available, it is possible that some of our business activities, or any arrangements with physicians, could be subject to challenge under one or more of such laws. It is not always possible to identify and deter employee misconduct or business noncompliance, and the precautions we take to detect and prevent inappropriate conduct may not be effective in controlling unknown or unmanaged risks or losses or in protecting us from governmental investigations or other actions or lawsuits stemming from a failure to be in compliance with such laws or regulations. Efforts to ensure that our business arrangements will comply with applicable healthcare laws may involve substantial costs. It is possible that governmental and enforcement authorities will conclude that our business practices may not comply with current or future statutes, regulations or case law interpreting applicable fraud and abuse or other healthcare laws and regulations. If we or our employees, independent contractors, consultants, commercial partners and vendors violate these laws, we may be subject to investigations, enforcement actions or significant penalties, including the imposition of significant civil, criminal and administrative penalties, damages, disgorgement, monetary fines, imprisonment, possible exclusion from participation in Medicare, Medicaid and other federal healthcare programs, contractual damages, reputational harm, diminished profits and future earnings, additional reporting requirements or oversight if we become subject to a corporate integrity agreement or similar agreement to resolve allegations of non-compliance with these laws, and curtailment of our operations, any of which could adversely affect our ability to operate our business and our results of operations. In addition, any regulatory approvals or certifications (as applicable) and commercialization of our products outside the U.S. will also likely subject us to foreign equivalents of the healthcare laws mentioned above, among other foreign laws. Any action against us for violation of these laws, even if we successfully defend against such action, could cause us to incur significant legal expenses and divert our management’s attention from the operation of our business.

47


Expanding our commercial strategy based on third-party payor coverage and reimbursement may not be successful and will subject us to new risks, including, without limitation, changes in third-party payor coding, coverage and reimbursement rates for our products that obtain FDA or foreign regulatory authorities authorization or notified bodies certification which could affect the adoption of such products and negatively impact our future revenue.

With respect to our current products, including the Owlet Smart Sock, Owlet Dream Sock, Owlet Cam and Owlet Dream Lab , we utilize a direct-to-consumer model where consumers purchase our products directly from us or one of our retailers. Currently, these products are not covered or reimbursed by any third-party payor. We are actively developing a strategy to enable healthcare providers to obtain reimbursement for products for which we successfully obtain FDA authorization, including the Owlet BabySat, or the services associated with such products. However, this new strategy may not be successful as payors may refuse to provide coverage and reimbursement for these products even if we obtain FDA authorization.

In the U.S., healthcare providers who may purchase these products generally rely on third-party payors, including Medicare, Medicaid and private health insurance plans, to pay for all or a portion of the cost of our products. To contain costs of new technologies, governmental healthcare programs and third-party payors are increasingly scrutinizing new and existing medical devices by requiring extensive evidence of favorable clinical outcomes. To the extent we market any medical devices, are successful in obtaining FDA marketing authorization to the extent applicable, and third-party payors determine that our products are medically necessary and clinically effective, the resulting reimbursement payment rates might not be adequate or may require co-payments that patients find unacceptably high. Third-party payors regularly update reimbursement amounts and may also revise the methodologies from time to time used to determine reimbursement amounts. This includes routine updates to payments to physicians for services provided. These updates could directly impact the demand for our products. Although we believe that healthcare providers may be able to bill third-party payors using existing Current Procedural Terminology (“CPT”) codes for the remote monitoring of patients using products for which we obtain FDA authorization, including the initial set-up and patient education on the use of such products, their inability to obtain adequate reimbursement from third-party payors may adversely affect our business.

In addition, foreign jurisdictions have their own unique healthcare systems and regulation regimes that differ substantially from the U.S. and other international markets. Successfully navigating those regimes will require significant resources and may ultimately be unsuccessful. As a result, our financial performance could be harmed, our costs could increase, and our ability to generate revenue could be delayed.

Given the evolving nature of the healthcare industry and on-going healthcare cost reforms, the likelihood of success of our new commercial strategy is, and will continue to be, subject to changes in the level of third-party payor coverage and reimbursement for these products and services

Legislative and regulatory changes in the healthcare industry could have a negative impact on our financial performance. Furthermore, our business, financial condition, results of operations and cash flows could be significantly and adversely affected by healthcare reform legislation in the U.S. or in potential key international markets.

Changes in the healthcare industry in the U.S. and abroad could adversely affect the demand for our potential medical devices and the way in which we conduct our business. For example, the Patient Protection and Affordable Care Act, as amended by the Health Care and Education Reconciliation Act (collectively, the “ACA”), enacted in 2010, required most individuals to have health insurance, established new regulations on health plans, created insurance-pooling mechanisms and reduced Medicare spending on services provided by hospitals and other providers. Since its enactment, there have been legislative, executive and judicial challenges to certain aspects of the ACA. On June 17, 2021, the U.S. Supreme Court dismissed the most recent judicial challenge to the ACA brought by several states without specifically ruling on the constitutionality of the ACA. Prior to the Supreme Court’s decision, President Biden issued an executive order initiating a special enrollment period from February 15, 2021 through August 15, 2021 for purposes of obtaining health insurance coverage through the ACA marketplace. The executive order also instructed certain governmental agencies to review and reconsider their existing policies and rules that limit access to healthcare. It is unclear how healthcare reform measures enacted by Congress or implemented by the Biden administration, if any, will impact our business.

Any medical devices we market and related business activities would be subject to rigorous regulation by the FDA and other federal, state and international governmental authorities. These authorities and members of Congress have been increasing their scrutiny over the medical device industry. In recent years, Congress, the Department of Justice, the Office of Inspector General of the Department of Health and Human Services, and the Department of Defense have issued subpoenas and other requests for information to medical device manufacturers, primarily related to financial arrangements with healthcare providers, regulatory compliance and marketing and product promotional
48


practices. Furthermore, certain state governments have enacted legislation to limit or increase transparency of interactions with healthcare providers, pursuant to which we are required by law to disclose payments and other transfers of value to healthcare providers licensed by certain states.

We anticipate that the government will continue to scrutinize the medical device industry closely, and any new regulations or statutory provisions could result in delays or increased costs during the periods of product development, clinical trials and regulatory review and marketing authorization or certification, as applicable, as well as increased costs to assure compliance. For instance, in December 2021, the EU Regulation No 2021/2282 on Health Technology Assessment (“HTA”), amending Directive 2011/24/EU, was adopted. This regulation which entered into force in January 2022 intends to boost cooperation among EU member states in assessing health technologies, including some medical devices, and providing the basis for cooperation at the EU level for joint clinical assessments in these areas. The regulation foresees a three-year transitional period and will permit EU member states to use common HTA tools, methodologies, and procedures across the EU, working together in four main areas, including joint clinical assessment of the innovative health technologies with the most potential impact for patients, joint scientific consultations whereby developers can seek advice from HTA authorities, identification of emerging health technologies to identify promising technologies early, and continuing voluntary cooperation in other areas. Individual EU member states will continue to be responsible for assessing non-clinical (e.g., economic, social, ethical) aspects of health technologies, and making decisions on pricing and reimbursement.

Our employees, consultants, sales agents, distributors and other commercial partners may engage in misconduct or other improper activities, including non-compliance with regulatory standards and requirements.

We are exposed to the risk that our employees, consultants, sales agents, distributors and other commercial partners may engage in fraudulent or illegal activity. Misconduct by these parties could include intentional, reckless or negligent conduct or other unauthorized activities that violate the regulations of the FDA and other U.S. healthcare regulators, as well as non-U.S. regulators, including those laws requiring the reporting of true, complete and accurate information to such regulators, manufacturing standards, healthcare fraud and abuse laws and regulations in the U.S. and abroad or laws that require the true, complete and accurate reporting of financial information or data. In particular, sales, marketing and business arrangements in the healthcare industry, including the sale of medical devices, are subject to extensive laws and regulations intended to prevent fraud, misconduct, kickbacks, self-dealing and other abusive practices. These laws and regulations may restrict or prohibit a wide range of pricing, discounting, marketing and promotion, sales commission, customer incentive programs and other business arrangements. It is not always possible to identify and deter misconduct by our employees, sales agencies, distributors and other third parties, and the precautions we take to detect and prevent this activity may not be effective in controlling unknown or unmanaged risks or losses or in protecting us from governmental investigations or other actions or lawsuits stemming from a failure to comply with these laws or regulations. If any such actions are instituted against us and we are not successful in defending ourselves or asserting our rights, those actions could result in the imposition of significant fines or other sanctions, including the imposition of civil, criminal and administrative penalties, damages, monetary fines, possible exclusion from participation in government healthcare programs, contractual damages, reputational harm, diminished profits and future earnings and curtailment of operations. Whether or not we are successful in defending against such actions or investigations, we could incur substantial costs, including legal fees, and divert the attention of management in defending ourselves against any of these claims or investigations.

We may be subject to regulatory reporting requirements if our products and services cause or contribute to a death or serious injury or malfunction in a way that would likely cause or contribute to a death or serious injury, or in certain other scenarios, and we may need to initiate voluntary corrective actions such as the recall of our products.

Regulatory agencies in many countries require us to report potential safety issues with our products and services under a variety of circumstances. For example, the FDA’s Medical Device Reporting regulations require that for any medical device we market, we report when we become aware of information that reasonably suggests that the product may have caused or contributed to a death or serious injury, or has malfunctioned in a way that, if the malfunction were to recur, would likely cause or contribute to a death or serious injury. We may fail to report adverse events of which we become aware within the prescribed timeframe. We may also fail to recognize that we have become aware of a reportable adverse event, especially if it is not reported to us as an adverse event or if it is an adverse event that is unexpected or removed in time from the use of the implant system. If we fail to comply with our reporting obligations, the FDA could take action, including warning letters, untitled letters, administrative actions, criminal prosecution, imposition of civil monetary penalties, revocation of our device clearance, seizure of our products or delay in clearance of future products. Similarly, under the CPSC consumer product reporting requirements, we are required to report to the CPSC any incident in which a CPSC-regulated product of ours creates an unreasonable risk of serious injury or death, contains a defect which could create a substantial product hazard, fails to comply with an applicable consumer product safety rule, or fails to comply with any other rule, regulation, standard or ban enforced by the CPSC. In addition, all manufacturers placing medical devices on the market in the EU are legally required to immediately report any serious incidents and field safety corrective actions involving
49


products produced or sold by the manufacturer to the relevant authority in those jurisdictions where any such incident occurred. As to general consumer products, where manufacturers and distributors know or ought to know that a product that they have placed on the market poses risks to the consumer that are incompatible with the general safety requirements, they shall immediately inform the relevant authority in the relevant jurisdictions. The FDA, CPSC and similar foreign regulatory authorities have the authority to require the recall of our commercialized products under certain circumstances and depending on the type of product. For example, the FDA must find that there is a reasonable probability that a medical device would cause serious adverse health consequences or death in order to require a recall. The standard for ordering a mandatory recall may be different for each regulatory agency and in foreign jurisdictions. In addition, manufacturers may, under their own initiative, correct or remove a marketed product for any reason and under any circumstance, which may constitute a recall if the product violates applicable laws. A government-mandated or voluntary recall by us or by one of our distributors could occur as a result of component failures, manufacturing errors, design or labeling defects or other deficiencies and issues.

We may initiate certain field actions, such as a correction or removal of our products in the future. Any correction or removal initiated by us to reduce a health risk posed by a medical device, or to remedy a regulatory violation caused by the device that may present a risk to health, must be reported to the FDA. Other regulatory authorities may have similar reporting requirements. If the regulatory agency subsequently determines that a report was required for a correction or removal of our products that we did not believe required a report, we could be subject to enforcement actions.

Any recalls of our products or enforcement actions would divert managerial and financial resources and could have an adverse effect on our financial condition and results of operations. In addition, given our dependence upon consumer perceptions, any negative publicity associated with any recalls could materially and adversely affect our business, financial condition, results of operations and growth prospects.

We face the risk of product liability claims and the amount of insurance coverage we hold now or in the future may not be adequate to cover all liabilities we might incur.

Our products are predominantly used in the home and expose us to product liability claims and product recalls, including, but not limited to, those that may arise from off-label use, malfunctions, design flaws or manufacturing defects related to our products or the use of our products with incompatible components or systems. In addition, as we continue to expand our product portfolio, we may enter or create new markets, including consumer markets, which may expose us to additional product liability risks. Any such product liability claims may include allegations of defects in manufacturing, defects in design, a failure to warn of dangers inherent in the product, negligence, strict liability and a breach of warranty. Claims could also be asserted under state consumer protection acts. If we cannot successfully defend ourselves against product liability claims, we may incur substantial liabilities or be required to limit commercialization of our products. Even successful defense would require significant financial and management resources. Regardless of the merits or eventual outcome, liability claims may result in decreased demand for our current or future products, injury to our reputation, costs to defend the related litigation, a diversion of management’s time and our resources, substantial monetary awards to customers, regulatory investigations, product recalls, withdrawals or labeling, marketing or promotional restrictions, loss of revenue, and the inability to sell our current or any future products.

Our product liability insurance may not be sufficient to cover any or all damages for product liability claims that may be brought against us in the future. Furthermore, we may not be able to obtain or maintain insurance in the future at satisfactory rates or in adequate amounts to protect us against any product liability claims. Additionally, the laws and regulations regarding product liability are constantly evolving, both through the passage of new legislation at the state and federal levels and through new interpretations of existing legislation. As the legal and regulatory landscape surrounding product liability change, we may become exposed to greater liability than currently anticipated.

We may incur environmental and personal injury liabilities related to certain hazardous materials used in our operations.

Certain manufacturing processes for our products may involve the storage, use, generation and disposal of certain hazardous materials and wastes, including lead, silicone adhesives, solder and solder paste, sealants, epoxies and various solvents such as methyl ethyl ketone, acetone and isopropyl alcohol. As a result, we are subject to certain environmental laws, as well as certain other laws and regulations, which restrict the materials that can be used in our products or in our manufacturing processes. For example, products that we sell in Europe are subject to regulation in the EU markets under the Restriction of the Use of Hazardous Substances Directive (“RoHS”). RoHS prohibits companies from selling products that contain certain hazardous materials in EU member states. In addition, the EU’s Registration, Evaluation, Authorization, and Restriction of Chemicals Regulation also restricts substances of very high concern in products. Compliance with such regulations may be costly and, therefore, we may incur significant costs to comply with these laws and regulations.
50



In addition, new environmental laws may further affect how we manufacture our products, how we use, generate or dispose of hazardous materials and waste, or further affect what materials can be used in our products. Any required changes to our operations may increase our manufacturing costs, detrimentally impact the performance of our products, add greater testing lead-times for product introductions or have other similar effects.

In connection with our research and manufacturing activities, we use, and our employees may be exposed to, materials that are hazardous to human health, safety or the environment. The risk of accidental injury to our employees or contamination from these materials cannot be eliminated, and we could be held liable for any resulting damages, the related liability for which could exceed our reserves. We do not specifically insure against environmental liabilities. If an enforcement action were to occur, our reputation and our business and financial condition may be harmed, even if we were to prevail or settle the action on terms favorable to us.

Changes to government immigration regulations may materially affect our workforce and limit our supply of qualified professionals, or increase our cost of securing workers.

We recruit professionals on a global basis and must comply with the immigration laws in the countries in which we operate, including the U.S. Some of our employees are working under Owlet-sponsored temporary work visas, including H1-B visas. Statutory law limits the number of new H1-B temporary work permit petitions that may be approved in a fiscal year. Furthermore, there is a possibility that the current U.S. immigration visa program may be significantly overhauled, and the number of H1-B visas available, as well as the process to obtain them, may be subject to significant change. Any resulting changes to this visa program could impact our ability to recruit, hire and retain qualified skilled personnel. If we are unable to obtain work visas in sufficient quantities or at a sufficient rate for a significant period of time, our business, operating results and financial condition could be adversely affected.

Changing laws and increasingly complex corporate governance and public disclosure requirements could have an adverse effect on our business and operating results.

Changing laws, regulations and standards relating to corporate governance and public disclosure and new regulations issued by the SEC and the New York Stock Exchange ("NYSE") have and will create additional compliance requirements for us. For example, the Dodd-Frank Act includes provisions regarding, among other things, advisory votes on named executive officer compensation and “conflict minerals” reporting. Complying with these rules and regulations has increased and will increase our legal and financial compliance costs, make some activities more difficult, time-consuming or costly and increase demand on our systems and resources. As a result, management’s attention may be diverted from other business concerns, which could adversely affect our business, financial condition and results of operations. We may also need to hire additional employees or engage outside consultants to comply with these requirements, which will increase our costs and expenses. To maintain high standards of corporate governance and public disclosure, we have invested in, and intend to continue to invest in, reasonably necessary resources to comply with evolving standards.

In addition, stockholder litigation surrounding executive compensation and disclosure of executive compensation has increased with the passage of the Dodd-Frank Act. Furthermore, our stockholders may not continue to approve our advisory vote on named executive officer compensation that is required to be voted on by our stockholders annually pursuant to the Dodd-Frank Act. If we are involved in a lawsuit related to compensation matters or any other matters not covered by our directors’ and officers’ liability insurance, we may incur significant expenses in defending against such lawsuits, or be subject to significant fines or required to take significant remedial actions, each of which could adversely affect our business, financial condition and results of operations.

Changes in the regulation of the internet could adversely affect our business.

Laws, rules and regulations governing internet communications, advertising and e-commerce are dynamic, and the extent of future government regulation is uncertain. Federal and state regulations govern various aspects of our online business, including intellectual property ownership and infringement, trade secrets, the distribution of electronic communications, marketing and advertising, user privacy and data security, search engines and internet tracking technologies. Governmental authorities continue to evaluate the privacy implications inherent in the use of third-party “cookies” and other methods of online tracking for behavioral advertising and other purposes. In the U.S., federal and state governments have enacted, and may in the future enact, legislation or regulations impacting the ability of companies and individuals to engage in these activities, such as by regulating the level of consumer notice and consent required before a company can employ cookies or other electronic tracking tools or the use of data gathered with such tools. Additionally, some providers of consumer devices and web browsers have implemented, or announced plans to implement, limits on behavioral or targeted advertising and/or means to make it easier for internet users to prevent the placement of cookies or to block other tracking technologies, which could, if widely adopted, result in the decreased effectiveness or use of third-party cookies and other methods of online tracking, targeting or re-targeting. The regulation of the use of these cookies and other current online tracking and
51


advertising practices or a loss in our ability to make effective use of services that employ such technologies could increase our costs of operations and limit our ability to acquire new consumers on cost-effective terms and consequently, materially and adversely affect our business, financial condition and results of operations. Further, in the EU and the UK, regulators are increasingly focusing on compliance with requirements in the online behavioral advertising ecosystem, and current national laws that implement the ePrivacy Directive are highly likely to be replaced by an EU regulation known as the ePrivacy Regulation, which will significantly increase fines for non-compliance. In the EU and the UK, informed consent is required for the placement of a cookie or similar technologies on a user’s device and for direct electronic marketing. The GDPR also imposes conditions on obtaining valid consent, such as a prohibition on pre-checked consents and a requirement to ensure separate consents are sought for each type of cookie or similar technology. While the text of the ePrivacy Regulation is still under development, a recent European court decision and regulators’ recent guidance are driving increased attention to cookies and tracking technologies. If regulators start to enforce the strict approach in recent guidance, this could lead to substantial costs, require significant systems changes, limit the effectiveness of our marketing activities, divert the attention of our technology personnel, adversely affect our margins, increase costs and subject us to additional liabilities.

Future taxation on the use of the internet or e-commerce transactions could also be imposed. Existing or future regulation or taxation could increase our operating expenses and expose us to significant liabilities. To the extent any such regulations require us to take actions that negatively impact us, they could have a material adverse effect on our business, financial condition and results of operations.

Risks Related to Our Intellectual Property

Our success depends in part on our proprietary technology, and if we are unable to obtain, maintain or successfully enforce our intellectual property rights, the commercial value of our products and services will be adversely affected, our competitive position may be harmed and we may be unable to operate our business profitably.

Our intellectual property includes the content of our website, our software code, our unregistered copyrights, our registered and unregistered trademarks, and our patents and patent applications. Our success and ability to compete depend in part on our ability to maintain and enforce existing intellectual property and to obtain, maintain and enforce further intellectual property protection for our products and services, both in the U.S. and in other countries. We attempt to protect our intellectual property rights through a combination of patent, trademark, copyright and trade secret laws, as well as licensing agreements and third-party and employee confidentiality and assignment agreements. Our intellectual property rights could also be challenged, invalidated, infringed or circumvented, or may not be sufficient to permit us to take advantage of current market trends or to otherwise provide competitive advantages. If we are unable to adequately protect our intellectual property rights or if they are challenged or otherwise prove ineffective, we may be required to undertake costly product redesign efforts or discontinue certain products, or our competitive position may be harmed.

We rely on our portfolio of issued and pending patent applications in the U.S. and other countries to protect our intellectual property and our competitive position. However, the patent positions of technology-based companies may involve complex legal and factual questions, and, therefore, the scope, validity and enforceability of any patent claims that we may obtain cannot be predicted with certainty. Accordingly, we cannot provide any assurances that any of our issued patents have, or that any of our currently pending or future patent applications that mature into issued patents will include claims with a scope sufficient to protect our products and services. Our pending and future patent applications may not result in the issuance of patents or, if issued, may not issue in a form that will be advantageous to us. While we generally apply for patents in those countries where we intend to make, have made, use or sell patented products and services, we may not accurately predict all of the countries where patent protection will ultimately be desirable. If we fail to timely file for a patent, we may be precluded from doing so at a later date. Additionally, any patents issued to us may be challenged, narrowed, invalidated, held unenforceable or circumvented, or may not be sufficiently broad to prevent third parties from producing competing products and services similar in design to our products and services.

In recent years, the U.S. Supreme Court has ruled on several patent cases and several laws have been enacted that, in certain situations, potentially narrow the scope of patent protection available and weaken the rights of patent owners. We may not be successful in securing additional patents on commercially desirable improvements, that such additional patents will adequately protect our innovations or offset the effect of expiring patents, or that competitors will not be able to design around our patents. In addition, third parties may challenge our issued patents through procedures such as Inter-Partes Review (“IPR”). In many IPR challenges, the U.S. Patent and Trademark Office (“PTO”) cancels or significantly narrows issued patent claims. IPR challenges could increase the uncertainties and costs associated with the maintenance, enforcement and defense of our issued and future patents and could have a material adverse effect on our business, financial condition and results of operations.

52


We also utilize unpatented proprietary technology and know-how and often rely on confidentiality agreements and intellectual property assignment agreements with our employees, independent distributors and consultants to protect and transfer to us such unpatented proprietary technology and know-how. However, such agreements may not be enforceable or may not provide meaningful protection for our proprietary information in the event of unauthorized use or disclosure or other breaches of the agreements, or in the event that our competitors discover or independently develop similar or identical designs or other proprietary information.

We rely on the use of common law copyrights with respect to the code, algorithms and trade secrets in our business and our products and services. Common law copyrights provide less protection than registered copyrights. Copyrights, common law or registered, do not generally prevent others from independently developing the same or similar code, algorithms or trade secrets, so our copyrights would not offer protection against our competitors to the extent they are able to independently generate similar code, algorithms or trade secrets as our own. Loss of rights in our copyrights could adversely affect our business, financial condition and results of operations.

We rely on the use of registered and common law trademarks with respect to the brand names of some of our products and services. Common law trademarks provide less protection than registered trademarks. If a third party were to register trademarks similar to our unregistered trademarks in a given jurisdiction, particularly outside the U.S., our ability to continue using our unregistered trademarks in the applicable jurisdiction could be substantially restricted and we may be subject to potentially costly and burdensome claims for trademark infringement. Loss of rights in our trademarks could adversely affect our business, financial condition and results of operations.

If our trademarks and trade names are not adequately protected, we may not be able to build name recognition in our markets of interest and our competitive position may be harmed.

We rely on our trademarks, logos, and trade names to distinguish our products and services from the products and services of our competitors, and have registered or applied to register many of these trademarks. There can be no assurance that our trademark applications will be approved. While we generally apply for trademarks in those countries where we intend to sell our products and services, we may not accurately predict all of the countries where registered trademarks will be desirable. We may also fail to register appropriate localized versions of our trademarks. If we fail to timely file for a trademark application in a country, we may be precluded from doing so at a later date and our ability to sell products and services using our existing brands in such countries could ultimately be restricted. Third parties may also oppose our trademark applications or otherwise challenge our use of the trademarks. In the event that our trademarks are successfully challenged, we could be forced to rebrand our products and services, which could result in loss of brand recognition, and could require us to devote resources to advertising and marketing new brands. Further, there can be no assurance that competitors will not infringe our trademarks or that we will have adequate resources to enforce our trademarks or will be successful in enforcing our trademarks. If competitors or other third parties use similar trademarks for similar products and services, the value and recognition of our brand and trademarks may be diluted or diminished.

We also license third parties to use our trademarks. In an effort to preserve our trademark rights, we enter into license agreements with these third parties, which govern the use of our trademarks and require our licensees to abide by quality control standards with respect to the goods and services that they provide under our trademarks.
Although we make efforts to monitor the use of our trademarks by our licensees, there can be no assurance that these efforts will be sufficient to ensure that our licensees abide by the terms of their licenses. In the event that our licensees fail to do so, our trademark rights could be diluted. Any of the foregoing could have a material adverse effect on our competitive position, business, financial condition, results of operations, and prospects.

We rely on third-party technology solutions, including software and software services, to support our IT infrastructure and in our products and services.

Both our IT infrastructure and our products and services leverage third-party technology solutions, software and software services. While much of this third-party technology is commercially available, off-the-shelf technology procured on standard terms and conditions, we cannot be assured that the applicable vendors will continue to make this third-party technology available on the same terms and conditions. Because this technology has been integrated into our operations and may have been configured for our specific needs, replacement of such technology could result in substantial delay, additional costs, and possible business interruptions. In addition, if third-party vendors, including any cloud service providers, were to experience unplanned downtime, delays or other similar issues, our products, services and internal operations could be significantly and adversely impacted.

Increased use of social media could create or amplify the effects of negative publicity and adversely affect sales and operating results.

As part of our marketing efforts, we rely on search engine marketing and social media platforms to attract and retain customers. These efforts may not be successful, and pose a variety of other risks, including the improper disclosure
53


of proprietary information, the posting of negative comments about our brand, the exposure of personally identifiable information, fraud, use of out-of-date information or failure to comply with regulations regarding such practices. Negative or false commentary about us or our products or services may be posted on social media platforms and may harm our reputation or business and social media has also given users the ability to more effectively organize collective actions, such as boycotts, which could be taken against us or our products or services. Customers value readily available information and often act on such information without affording us an opportunity for redress or correction. The inappropriate use of social media vehicles, including a failure to abide by applicable laws and regulations, in the use of social media by us or our influencers, employees, contractors, suppliers, customers or other third parties associated or perceived to be associated with us could increase our costs, lead to litigation, fines or regulatory action or result in negative publicity that could damage our reputation. The occurrence of any such developments could have an adverse effect on our business results.

In addition, events such as the Warning Letter reported in the media, including social media, whether or not accurate or involving us or our products or services, could create or amplify negative publicity for us or for the industry or market segments in which we operate. These and other types of social media risks could reduce demand for products and services offered by us and/or shift consumer preferences to competitors and could result in a decrease in customer demand for our products and services.
 
If we fail to execute enforceable invention assignment and confidentiality agreements with our employees and contractors involved in the development of intellectual property or are unable to protect the confidentiality of our trade secrets, the value of our products and services and our business and competitive position could be harmed.

In addition to patent protection, we also rely on protection of copyrights, trade secrets, know-how and confidential and proprietary information. We generally enter into confidentiality and invention assignment agreements with our employees, consultants and third parties upon their commencement of a relationship with us. However, we may not enter into such agreements with all employees, consultants and third parties who have been involved in the development of our intellectual property and such agreements may not be enforceable in accordance with the terms in every jurisdiction where such employees, consultants or third parties reside or are employed. In addition, these agreements may not provide meaningful protection against the unauthorized use or disclosure of our trade secrets or other confidential information, and adequate remedies may not exist if unauthorized use or disclosure were to occur. The exposure of our trade secrets and other proprietary information would impair our competitive advantages and could have a material adverse effect on our business, financial condition and results of operations. In particular, a failure to protect our proprietary rights may allow competitors to copy our technology, which could adversely affect our pricing and market share. Further, other parties may independently develop substantially equivalent know-how and technology.

In addition to contractual measures, we try to protect the confidential nature of our proprietary information using commonly accepted physical and technological security measures. Such measures may not, for example, in the case of misappropriation of a trade secret by an employee or third party with authorized access, provide adequate protection for our proprietary information. Our security measures may not prevent an employee or consultant from misappropriating our trade secrets and providing them to a competitor, and recourse we take against such misconduct may not provide an adequate remedy to protect our interests fully. Unauthorized parties may also attempt to copy or reverse engineer certain aspects of our products and services that we consider proprietary and a trade secret. Enforcing a claim that a party illegally disclosed or misappropriated a trade secret can be difficult, expensive and time-consuming, and the outcome is unpredictable. Even though we use commonly accepted security measures, trade secret violations are often a matter of state law, and the criteria for protection of trade secrets can vary among different jurisdictions. In addition, trade secrets may be independently developed by others in a manner that could prevent legal recourse by us. We also have agreements with our employees, consultants and third parties that obligate them to assign their inventions to us, however these agreements may not be self-executing, not all employees or consultants may enter into such agreements, or employees or consultants may breach or violate the terms of these agreements, and we may not have adequate remedies for any such breach or violation. If any of our intellectual property or confidential or proprietary information, such as our trade secrets, were to be disclosed or misappropriated, or if any such information was independently developed by a competitor, it could have a material adverse effect on our competitive position, business, financial condition, results of operations, and prospects.

The laws of foreign countries may not adequately protect our intellectual property rights.

Intellectual property protection laws in foreign jurisdictions differ substantially from those in the U.S. If we fail to apply for intellectual property protection in foreign jurisdictions, or if we cannot adequately protect our intellectual property rights in these foreign jurisdictions, our competitors may be able to compete more effectively against us, which could adversely affect our competitive position, as well as our business, financial condition and results of operations.

54


If third parties claim that we infringe their intellectual property rights, we may incur liabilities and costs and may have to redesign or discontinue selling certain products and services.

Searching for existing third-party intellectual property rights and evaluating its applicability to our products and services can be a costly and time-consuming process. Such searches and evaluation may not reveal important intellectual property and our competitors may also have filed for patent protection, which may not be publicly available information, or claimed trademark rights that have not been revealed through our searches. We may not undertake such searches and evaluation of third-party intellectual property rights and, as a result, may not be aware of intellectual property rights that could be asserted against our products or services. In addition, some of our employees were previously employed at other consumer product, medical device and Internet of Things/smart device companies. We may be subject to claims that our employees have disclosed, or that we have used, trade secrets or other proprietary information of our employees’ former employers. Our efforts to identify and avoid infringing on third parties’ intellectual property rights may not always be successful. Any claims of patent or other intellectual property infringement against us, even those without merit, could:
be expensive and time-consuming to defend and result in payment of significant damages to third parties;
force us to stop making or selling products and services that incorporate the intellectual property;
require us to redesign, reengineer or rebrand our products and services, product candidates and technologies;
require us to enter into royalty agreements that would increase the costs of our products and services;
require us to indemnify third parties pursuant to contracts in which we have agreed to provide indemnification for intellectual property infringement claims;
divert the attention of our management and other key employees; and
result in our customers or potential customers deferring or limiting their purchase or use of the affected products and services impacted by the claims until the claims are resolved;
any of which could have a material adverse effect on our business, financial condition and results of operations. In addition, new patents obtained by our competitors could threaten the continued commercialization of our products and services in the market even after they have already been introduced.

We may become involved in lawsuits to protect or enforce our intellectual property, which could be expensive, time consuming and unsuccessful.

Third parties, including our competitors, could be infringing, misappropriating or otherwise violating our intellectual property rights. We do not regularly conduct monitoring for unauthorized use at this time. From time to time, we seek to analyze our competitors’ products and services, or seek to enforce our rights against potential infringement, misappropriation or violation of our intellectual property. However, the steps we have taken, or take in the future, to protect our proprietary rights may not be adequate to enforce our rights as against such infringement, misappropriation or violation of our intellectual property. We may not be able to detect unauthorized use of, or take appropriate steps to enforce, our intellectual property rights. Any inability to meaningfully enforce our intellectual property rights could harm our ability to compete and reduce demand for our products and services.

We believe some of the new market entrants in our industry, including some of the world’s largest technology companies, may in the future infringe our intellectual property, and we may be required to engage in litigation to protect or enforce our intellectual property rights. An adverse result in any litigation proceeding could harm our business. In any lawsuit we bring to enforce our intellectual property rights, a court may refuse to stop the other party from using the technology at issue on grounds that our intellectual property rights do not cover the technology or actions in question. If we initiate legal proceedings against a third party to enforce a patent covering a product, the defendant could counterclaim that such patent is invalid or unenforceable. In patent litigation in the U.S., defendant counterclaims alleging invalidity or unenforceability are commonplace.

Grounds for a validity challenge could be an alleged failure to meet any of several statutory requirements, including lack of novelty, obviousness, or non-enablement. Grounds for an unenforceability assertion could be an allegation that someone connected with prosecution of the patent withheld relevant information from the PTO, or made a misleading statement, during prosecution. Mechanisms for such challenges include re-examination, post-grant review, IPR, interference proceedings, derivation proceedings, and equivalent proceedings in foreign jurisdictions (e.g., opposition proceedings). Such proceedings could result in the revocation of, cancellation of, or amendment to our patents in such a way that they no longer cover our products and services, or any future products and services that we may develop.

The outcome following legal assertions of invalidity and unenforceability is unpredictable. With respect to the validity question, for example, we cannot be certain that there is no invalidating prior art, of which we and the patent
55


examiner were unaware during prosecution. If a third party were to prevail on a legal assertion of invalidity or unenforceability, we would lose at least part, and perhaps all, of the patent protection on our products and services. Such a loss of patent protection would have a material adverse impact on our business, financial condition, results of operations, and prospects.

Because of the substantial amount of discovery required in connection with intellectual property litigation, there is a risk that some of our confidential information could be compromised by disclosure during litigation. There could also be public announcements of the results of hearing, motions, or other interim developments. If securities analysts or investors perceive these results to be negative, it could have a material adverse effect on the price of shares of our common stock. Even if we ultimately prevail, a court may decide not to grant an injunction against further infringing activity and instead award only monetary damages, which may not be an adequate remedy. Furthermore, the monetary cost of such litigation and the diversion of the attention of our management could outweigh any benefit we receive as a result of the proceedings. Uncertainties resulting from the initiation and continuation of patent litigation or other proceedings could have a material adverse effect on our business.

We may be subject to claims that we or our employees have misappropriated the intellectual property of a third party, including trade secrets or know-how, or are in breach of non-competition or non-solicitation agreements with our competitors and third parties may claim an ownership interest in intellectual property we regard as our own.

Many of our employees and consultants were previously employed at or engaged by other companies, including our competitors or potential competitors. Some of these employees, consultants and contractors may have executed proprietary rights, non-disclosure and non-competition agreements in connection with such previous employment. Although we try to ensure that our employees and consultants do not use the intellectual property, proprietary information, know-how or trade secrets of others in their work for us, we may be subject to claims that we or these individuals have, inadvertently or otherwise, misappropriated the intellectual property or disclosed the alleged trade secrets or other proprietary information, of these former employers, competitors or other third parties. Additionally, we may be subject to claims from third parties challenging our ownership interest in or inventorship of intellectual property we regard as our own, based on claims that our agreements with employees or consultants obligating them to assign intellectual property to us are ineffective or in conflict with prior or competing contractual obligations to assign inventions to another employer, to a former employer, or to another person or entity. Litigation may be necessary to defend against claims, and it may be necessary or we may desire to enter into a license to settle any such claim; however, there can be no assurance that we would be able to obtain a license on commercially reasonable terms, if at all. If our defense to those claims fails, in addition to paying monetary damages or a settlement payment, a court could prohibit us from using technologies, features or other intellectual property that are essential to our products and services, if such technologies or features are found to incorporate or be derived from the trade secrets or other proprietary information of the former employers. An inability to incorporate technologies, features or other intellectual property that are important or essential to our products and services could have a material adverse effect on our business and competitive position, and may prevent us from selling our products and services. In addition, we may lose valuable intellectual property rights or personnel. Even if we are successful in defending against these claims, litigation could result in substantial costs and could be a distraction to management. Any litigation or the threat thereof may adversely affect our ability to hire employees or contract with independent sales representatives. A loss of key personnel or their work product could hamper or prevent our ability to commercialize our products and services, which could materially and adversely affect our business, financial condition, operating results, cash flows and prospects.

Our proprietary software may not operate properly, which could damage our reputation, give rise to claims against us, or divert application of our resources from other purposes, any of which could harm our business and operating results.

Proprietary software and hardware development is time-consuming, expensive and complex, and may involve unforeseen difficulties. We may encounter technical obstacles, and it is possible that we discover additional problems or design defects that prevent our proprietary software from operating properly. We have experienced product design issues in the past and continue to work to address those and anticipate additional concerns. If our services do not function reliably, malfunction, or fail to achieve customer expectations in terms of performance, customers could assert liability claims against us or attempt to cancel their contracts with us. This could damage our reputation and impair our ability to attract or maintain customers.

The software underlying our products and services is highly complex and may contain undetected errors or vulnerabilities, some of which may only be discovered after our products and services have been used by our customers. Any real or perceived errors, failures, bugs or other vulnerabilities discovered in our products or services could result in negative publicity and damage to our reputation, loss of customers, loss of or delay in market acceptance of our products and services, loss of competitive position, loss of revenue or liability for damages, fines or regulatory actions, overpayments or underpayments, any of which could harm our enrollment rates. Similarly, any
56


real or perceived errors, failures, design flaws or defects in our devices could have similar negative results. In such an event, we may be required or may choose to expend additional resources in order to help correct the problem. Such efforts could be costly, or ultimately unsuccessful. Even if we are successful at remediating issues, we may experience damage to our reputation and brand. There can be no assurance that provisions typically included in our agreements with partners that attempt to limit our exposure to claims would be enforceable or adequate or would otherwise protect us from liabilities or damages with respect to any particular claim. Even if unsuccessful, a claim brought against us by any customers or partners would likely be time-consuming and costly to defend and could seriously damage our reputation and brand.

Risks Related to Our Common Stock and Warrants

The price of our common stock and warrants may be volatile.

The price of our common stock and warrants may fluctuate due to a variety of factors, including:
actual or anticipated fluctuations in our operating results or future prospects;
our announcements or our competitors’ announcements of new products and services;
the public’s reaction to our press releases, our other public announcements and our filings with the SEC;
strategic actions by us or our competitors, such as acquisitions or restructurings;
new laws or regulations or new interpretations of existing laws or regulations applicable to our business;
regulatory or other governmental actions such as the Warning Letter issued to us on October 1, 2021, and actions taken in response to those actions;
changes in accounting standards, policies, guidance, interpretations or principles;
changes in our growth rates or our competitors’ growth rates;
developments regarding our patents or proprietary rights or those of our competitors;
ongoing legal proceedings;
commencement of, or involvement in, litigation involving the combined company;
our ability to raise additional capital as needed;
changes in our capital structure, such as future issuances of securities or the incurrence of new or additional debt;
the volume of shares of common stock available for public sale and the size of our public float;
additions and departures of key personnel;
concerns or allegations as to the safety or efficacy of our products and services;
sales of stock by us or members of our management team, our board of directors (the “Board”) or certain significant stockholders;
changes in stock market analyst recommendations or earnings estimates regarding our stock, other comparable companies or our industry generally; and
changes in financial markets or general economic conditions, including the effects of recession or slow economic growth in the U.S. and abroad, interest rates, fuel prices, international currency fluctuations, corruption, political instability, acts of war, including the Russian Federation's invasion of Ukraine in February 2022, acts of terrorism, and the COVID-19 pandemic or other public health crises.
These market and industry factors may materially reduce the market price of our common stock and warrants regardless of our operating performance.

A substantial amount of our common stock is currently subject to lock-up restrictions. Future resales of common stock upon the expiration of those restrictions, or the perception such resales may occur, may cause the market price of our securities to drop significantly, even if our business is doing well.

A substantial amount of our common stock outstanding as of December 31, 2021, including all shares issued to our pre-Merger equity holders in the Merger, is subject to lock-up restrictions that are scheduled to expire on the 18 month anniversary of the closing of the Merger (subject to early price-based releases). Once these lock-up restrictions have expired, the holders of those shares will not be restricted from selling them, other than by applicable securities laws. These sales, or the perception in the market that the holders of a large number of shares intend to sell shares, could reduce the market price of our securities. As restrictions on resale end, the sale or possibility of sale of these shares could have the effect of increasing the volatility in the market price of our common
57


stock, and the market price of our common stock could decline if the holders of currently restricted shares or other stockholders sell their shares or are perceived by the market as intending to sell them.

If securities or industry analysts issue an adverse or misleading opinion regarding our common stock or warrants, the price and trading volume of our common stock and warrants could decline.

The trading market for our common stock and warrants will be influenced by the research and reports that industry or securities analysts publish about us or our business. We currently have limited research coverage by securities and industry analysts. If any of the analysts who cover us issue an adverse or misleading opinion regarding us, our business model, our intellectual property or the performance of our common stock or warrants, or if our operating results fail to meet the expectations of analysts, the price of our common stock and warrants would likely decline. If one or more of these analysts cease coverage of us or fail to publish reports on us regularly, we could lose visibility in the financial markets, which in turn could cause the price and trading volume of our common stock and warrants to decline.

Concentration of ownership among our existing directors, executive officers and principal stockholders may prevent new investors from influencing significant corporate decisions.

Our directors and executive officers and their affiliates beneficially own a significant amount of our common stock. Subject to any fiduciary duties owed to our other stockholders under Delaware law, these stockholders may be able to exercise significant influence over matters requiring stockholder approval, including the election of directors and approval of significant corporate transactions, and will have some control over our management and policies. Some of these persons or entities may have interests that are different from yours. For example, these stockholders may support proposals and actions with which you may disagree or which are not in your best interests. The concentration of ownership could delay or prevent a change in control of us, or otherwise discourage a potential acquirer from attempting to obtain control of us, which in turn could reduce the price of our stock.

In addition, these stockholders could use their voting influence to maintain our existing management and directors in office or support or reject other management and Board proposals that are subject to stockholder approval, such as amendments to our employee stock plans and approvals of significant financing transactions.

We may acquire other businesses or form other joint ventures or make investments in other companies or technologies that could negatively affect our operating results, dilute our stockholders’ ownership, increase our debt or cause us to incur significant expense.

We may pursue acquisitions of businesses and assets. We also may pursue strategic alliances and additional joint ventures that leverage our technology and industry experience to expand our offerings or distribution. We have no experience with acquiring other companies and limited experience with forming strategic partnerships. We may not be able to find suitable partners or acquisition candidates, and we may not be able to complete such transactions on favorable terms, if at all. If we make any acquisitions, we may not be able to integrate these acquisitions successfully into our existing business, and we could assume unknown or contingent liabilities. Any future acquisitions also could result in the incurrence of debt, contingent liabilities or future write-offs of intangible assets or goodwill, any of which could have a material adverse effect on our financial condition, results of operations and cash flows. Integration of an acquired company also may disrupt ongoing operations and require management resources that we would otherwise focus on developing our existing business. We may experience losses related to investments in other companies, which could have a material negative effect on our results of operations and financial condition. We may not realize the anticipated benefits of any acquisition, technology license, strategic alliance or joint venture. To finance any acquisitions or joint ventures, we may choose to issue shares of our common stock as consideration, which would dilute the ownership of our stockholders. Additional funds may not be available on terms that are favorable to us, or at all. If the price of our common stock is low or volatile, we may not be able to acquire other companies or fund a joint venture project using our stock as consideration.

We also expect to continue to carry out internal strategic initiatives that we believe are necessary to grow our revenues and expand our business, both in the U.S. and abroad. For example, we have continued to invest in international expansion programs designed to increase our worldwide presence and take advantage of market expansion opportunities around the world. Although we believe our investments in these initiatives continue to be in the long-term best interests of Owlet and our stockholders, there are no assurances that such initiatives will yield favorable results for us. Accordingly, if these initiatives are not successful, our business, financial condition and results of operations could be adversely affected.

If these risks materialize, our stock price could be materially adversely affected. Any difficulties in the integration of acquired businesses or unexpected penalties, liabilities or asset impairments in connection with such acquisitions or investments could have a material adverse effect on our business, financial condition and results of operations.

58


The obligations associated with being a public company involve significant expenses and require significant resources and management attention, which may divert from our business operations.

We are subject to the reporting requirements of the Exchange Act and the Sarbanes-Oxley Act. The Exchange Act requires that we file annual, quarterly and current reports with respect to our business and financial condition. The Sarbanes-Oxley Act requires, among other things, that we establish and maintain effective internal control over financial reporting. As a result, we will incur increased legal, accounting and other expenses that we did not previously incur. Our entire management team and many of our other employees will need to devote substantial time to compliance and may not effectively or efficiently manage our transition into a public company.

In addition, the need to establish the corporate infrastructure demanded of a public company may also divert management’s attention from implementing our business strategy, which could prevent us from improving our business, results of operations and financial condition. We have made, and will continue to make, changes to our internal control over financial reporting, including IT controls, and procedures for financial reporting and accounting systems to meet our reporting obligations as a public company. However, the measures we take may not be sufficient to satisfy our obligations as a public company. If we do not continue to develop and implement the right processes and tools to manage our changing enterprise and maintain our culture, our ability to compete successfully and achieve our business objectives could be impaired, which could negatively impact our business, financial condition and results of operations. In addition, we cannot predict or estimate the amount of additional costs we may incur to comply with these requirements. We anticipate that these costs will materially increase our general and administrative expenses.

These rules and regulations result in our incurring legal and financial compliance costs and will make some activities more time-consuming and costly. For example, we expect these rules and regulations to make it more difficult and more expensive for us to obtain director and officer liability insurance, and we may be required to accept reduced policy limits and coverage or incur substantially higher costs to obtain the same or similar coverage. As a result, it may be more difficult for us to attract and retain qualified people to serve on our Board, on our Board committees or as executive officers.

As a public reporting company, we are subject to rules and regulations established from time to time by the SEC regarding our internal control over financial reporting. If we fail to establish and maintain effective internal control over financial reporting and disclosure controls and procedures, we may not be able to accurately report our financial results or report them in a timely manner.

We are subject to the rules and regulations established from time to time by the SEC and NYSE. These rules and regulations require, among other things that we establish and periodically evaluate procedures with respect to our internal control over financial reporting. Reporting obligations as a public company are likely to place a considerable strain on our financial and management systems, processes and controls, as well as on our personnel.

In addition, as a public company, we are required to document and test our internal control over financial reporting pursuant to Section 404 of the Sarbanes-Oxley Act so that our management can certify as to the effectiveness of our internal control over financial reporting.

Because we do not anticipate paying any cash dividends on our capital stock in the foreseeable future, capital appreciation, if any, will be your sole source of gain.

We have never declared or paid cash dividends on our capital stock. We currently intend to retain all of our future earnings, if any, to finance the growth and development of our business. In addition, under certain circumstances, our loan and security agreement and any future debt or preferred securities or future debt agreements we may enter may preclude us from paying dividends. As a result, capital appreciation, if any, of our common stock will be your sole source of gain for the foreseeable future.

Our corporate documents and Delaware law contain provisions that could discourage, delay or prevent a change in control of our company, prevent attempts to replace or remove current management and reduce the market price of our common stock and warrants.

Provisions in our certificate of incorporation and bylaws may discourage, delay or prevent a merger or acquisition involving us that our stockholders may consider favorable. For example, our certificate of incorporation and bylaws authorize our Board to issue up to 100 million shares of preferred stock. As a result, without further stockholder approval, our Board will have the authority to attach special rights, including voting and dividend rights, to this preferred stock, including pursuant to a stockholder rights plan. With these rights, preferred stockholders could make it more difficult for a third-party to acquire us. In addition, our certificate of incorporation and bylaws provide for a staggered Board, whereby directors serve for three-year terms, with one-third of the directors coming up for reelection each year. A staggered Board will make it more difficult for a third-party to obtain control of our Board
59


through a proxy contest, which may be a necessary step in an acquisition of us that is not favored by our Board. We are also subject to anti-takeover provisions under the Delaware General Corporation Law ("DGCL"). Under these provisions, if anyone becomes an “interested stockholder,” we may not enter into a “business combination” with that person for three years without special approval, which could discourage a third-party from making a takeover offer and could delay or prevent a change in control of us. For purposes of these provisions, an “interested stockholder” generally means someone owning 15% or more of our outstanding voting stock or an affiliate of ours that owned 15% or more of our outstanding voting stock during the past three years, subject to certain exceptions as described in the DGCL.

We are an “emerging growth company” and the reduced disclosure requirements applicable to emerging growth companies may make our common stock and warrants less attractive to investors.

We are an “emerging growth company,” as defined in the JOBS Act. As an emerging growth company, we may follow reduced disclosure requirements and do not have to make all of the disclosures that public companies that are not emerging growth companies do. We will remain an emerging growth company until the earlier of (a) the last day of the fiscal year in which we have total annual gross revenues of $1.07 billion or more; (b) December 31, 2025; (c) the date on which we have issued more than $1.0 billion in nonconvertible debt during the previous three years; or (d) the date on which we are deemed to be a large accelerated filer under the rules of the SEC, which means the market value of our Common Stock that is held by non-affiliates exceeds $700.0 million as of the prior June 30th. For so long as we remain an emerging growth company, we are permitted and intend to rely on exemptions from certain disclosure requirements that are applicable to other public companies that are not emerging growth companies. These exemptions include:
not being required to comply with the auditor attestation requirements of Section 404 of the Sarbanes-Oxley Act;
not being required to comply with any requirement that may be adopted by the Public Company Accounting Oversight Board regarding mandatory audit firm rotation or a supplement to the auditor’s report providing additional information about the audit and the consolidated financial statements (i.e., an auditor discussion and analysis)
reduced disclosure obligations regarding executive compensation in our periodic reports, proxy statements and registration statements; and
exemptions from the requirements of holding a nonbinding advisory vote of stockholders on executive compensation, stockholder approval of any golden parachute payments not previously approved and having to disclose the ratio of the compensation of our chief executive officer to the median compensation of our employees.
In addition, the JOBS Act provides that an emerging growth company can take advantage of an extended transition period for complying with new or revised accounting standards. This allows an emerging growth company to delay the adoption of certain accounting standards until those standards would otherwise apply to private companies. We have elected to use the extended transition period for complying with new or revised accounting standards; and as a result of this election, our consolidated financial statements may not be comparable to companies that comply with public company effective dates.

We may choose to take advantage of some, but not all, of the available exemptions for emerging growth companies. We cannot predict whether investors will find our common stock or warrants less attractive if we rely on these exemptions. If some investors find our common stock or warrants less attractive as a result, there may be a less active trading market for our common stock and warrants and our share and warrant price may be more volatile.

Our bylaws provide that the state or federal courts located within the State of Delaware are the exclusive forum for substantially all disputes between us and our stockholders, which could limit our stockholders’ ability to obtain a favorable judicial forum for disputes with us or our directors, officers or employees.

Our bylaws provide that the state or federal courts located within the State of Delaware are the sole and exclusive forum for: (i) any derivative action, suit or proceeding brought on our behalf, (ii) any action, suit or proceeding asserting a claim of breach of fiduciary duty owed by any of our directors, officers or stockholders to our stockholders, (iii) any action, suit or proceeding asserting a claim against us arising pursuant to any provision of the DGCL, our bylaws, or (iv) any action, suit or proceeding asserting a claim governed by the internal affairs doctrine. However, this choice of forum provision does not apply to (a) actions in which the Court of Chancery in the State of Delaware concludes that an indispensable party is not subject to the jurisdiction of Delaware courts, or (b) actions in which a federal court has assumed exclusive jurisdiction to a proceeding. This choice of forum provision is not intended to apply to any actions brought under the Exchange Act. Section 27 of the Exchange Act creates exclusive federal jurisdiction over all suits brought to enforce any duty or liability created by the Exchange Act or the rules and regulations thereunder. As a result, the exclusive forum provision will not apply to suits brought to enforce any duty or liability created by the Exchange Act or any other claim for which the federal courts have exclusive
60


jurisdiction. Our bylaws also provide that the federal district courts of the U.S. of America will be the exclusive forum for the resolution of any complaint asserting a cause of action arising under the Securities Act of 1933, as amended (the Securities Act). This choice of forum provision may limit a stockholder’s ability to bring a claim in a judicial forum that it finds favorable for disputes with us or our directors, officers or other employees or stockholders, which may discourage such lawsuits against us and our directors, officers and other employees or stockholders.

Furthermore, the enforceability of similar choice of forum provisions in other companies’ certificates of incorporation has been challenged in legal proceedings, and it is possible that a court could find these types of provisions to be inapplicable or unenforceable. If a court were to find the choice of forum provision in our bylaws to be inapplicable or unenforceable in an action, we may incur additional costs associated with resolving such action in other jurisdictions, which could adversely affect our business, financial condition and results of operations.

You may only be able to exercise the public warrants on a “cashless basis” under certain circumstances, and if you do so, you will receive fewer shares of common stock from such exercise than if you were to exercise such warrants for cash.

The Warrant Agreement provides that in the following circumstances holders of warrants who seek to exercise their warrants will not be permitted to do so for cash and will, instead, be required to do so on a cashless basis in accordance with Section 3(a)(9) of the Securities Act: (i) if the shares of common stock issuable upon exercise of the warrants are not registered under the Securities Act in accordance with the terms of the Warrant Agreement; (ii) if we have so elected and the shares of common stock are at the time of any exercise of a warrant not listed on a national securities exchange such that they satisfy the definition of “covered securities” under Section 18(b)(1) of the Securities Act; and (iii) if we have so elected and we call the public warrants for redemption. If you exercise your public warrants on a cashless basis, you would pay the warrant exercise price by surrendering the warrants for that number of shares of common stock equal to (A) the quotient obtained by dividing (x) the product of the number of shares of common stock underlying the warrants, multiplied by the excess of the “Fair Market Value” (as defined in the next sentence) over the exercise price of the warrants by (y) the Fair Market Value and (B) 0.361 per whole warrant. The “Fair Market Value” is the average reported last sale price of the common stock as reported for the 10 trading day period ending on the trading day prior to the date on which the notice of exercise is received by the warrant agent or on which the notice of redemption is sent to the holders of warrants, as applicable. As a result, you would receive fewer shares of common stock from such exercise than if you were to exercise such warrants for cash.

We may amend the terms of the warrants in a manner that may have an adverse effect on holders of public warrants with the approval by the holders of at least 50% of the then outstanding public warrants. As a result, the exercise price of your warrants could be increased, the exercise period could be shortened and the number of shares of common stock purchasable upon exercise of a warrant could be decreased, all without your approval.

Our warrants were issued in registered form under a Warrant Agreement between Continental Stock Transfer & Trust Company, as warrant agent, and us. The Warrant Agreement provides that the terms of the warrants may be amended without the consent of any holder for the purpose of (i) curing any ambiguity or curing, correcting or supplementing any defective provision or (ii) adding or changing any provisions with respect to matters or questions arising under the Warrant Agreement as the parties to the Warrant Agreement may deem necessary or desirable and that the parties deem to not adversely affect the interests of the registered holders of the warrants, provided that the approval by the holders of at least 50% of the then-outstanding public warrants is required to make any change that adversely affects the rights of the registered holders of public warrants. Accordingly, we may amend the terms of the public warrants in a manner adverse to a holder of public warrants if holders of at least 50% of the then outstanding public warrants approve of such amendment. Although our ability to amend the terms of the public warrants with the consent of at least 50% of the then outstanding public warrants is unlimited, examples of such amendments could be amendments to, among other things, increase the exercise price of the warrants, convert the warrants into cash or shares, shorten the exercise period or decrease the number of shares of common stock purchasable upon exercise of a warrant.

Our Warrant Agreement designates the courts of the State of New York or the U.S. District Court for the Southern District of New York as the sole and exclusive forum for certain types of actions and proceedings that may be initiated by holders of the warrants, which could limit the ability of warrant holders to obtain a favorable judicial forum for disputes with us.

Our Warrant Agreement provides that, subject to applicable law, (i) any action, proceeding or claim against us arising out of or relating in any way to the Warrant Agreement, including under the Securities Act, will be brought and enforced in the courts of the State of New York or the U.S. District Court for the Southern District of New York, and (ii) that we irrevocably submit to such jurisdiction, which jurisdiction shall be the exclusive forum for any such action, proceeding or claim. We will waive any objection to such exclusive jurisdiction and that such courts represent an inconvenient forum. Notwithstanding the foregoing, these provisions of the Warrant Agreement will not
61


apply to suits brought to enforce any liability or duty created by the Exchange Act or any other claim for which the federal district courts of the U.S. are the sole and exclusive forum.
This choice-of-forum provision may limit a warrant holder’s ability to bring a claim in a judicial forum that it finds favorable for disputes with us, which may discourage such lawsuits. Alternatively, if a court were to find this provision of our Warrant Agreement inapplicable or unenforceable with respect to one or more of the specified types of actions or proceedings, we may incur additional costs associated with resolving such matters in other jurisdictions, which could materially and adversely affect our business, financial condition and results of operations and result in a diversion of the time and resources of our management and Board.

We may redeem your unexpired warrants prior to their exercise at a time that is disadvantageous to you, thereby making your warrants worthless.

We have the ability to redeem outstanding warrants at any time after they become exercisable and prior to their expiration, (a) at a price of $0.01 per warrant, provided that the closing price of our common stock equals or exceeds $18.00 per share (as adjusted for share splits, share capitalizations, reorganizations, recapitalizations and the like) for any 20 trading days within a 30 trading-day period ending on the third trading day prior to the date on which we give proper notice of such redemption to the warrant holders and provided certain other conditions are met, or (b) at a price of $0.10 per warrant, provided that the closing price of our common stock equals or exceeds $10.00 per share (as adjusted for share splits, share capitalizations, reorganizations, recapitalizations and the like) for any 20 trading days within a 30 trading-day period ending on the third trading day prior to the date on which we give proper notice of such redemption to the warrant holders and provided certain other conditions are met. If and when the warrants become redeemable by us, we may exercise our redemption right even if we are unable to register or qualify the underlying securities for sale under all applicable state securities laws. Redemption of the outstanding warrants could force you to (i) exercise your warrants and pay the exercise price therefor at a time when it may be disadvantageous for you to do so, (ii) sell your warrants at the then-current market price when you might otherwise wish to hold your warrants or (iii) accept the nominal redemption price which, at the time the outstanding warrants are called for redemption, is likely to be substantially less than the market value of your warrants. None of the private placement warrants will be redeemable by us so long as they are held by Sandbridge Acquisition Holdings LLC or its permitted transferees.

Item 1B. Unresolved Staff Comments.
None
Item 2. Properties.

Our corporate headquarters are located in Lehi, Utah, where we lease approximately 56,000 square feet of office space. We use this leased space primarily for management, marketing, finance, legal, regulatory compliance, human resources and general administrative teams, research and development, engineering and laboratory space. This lease is set to expire on July 31, 2024, subject to our option to extend the term through July 31, 2034.

As a result of a transition to a primarily remote working environment during 2021, the Company entered into agreements to sub-lease its office space through July 31, 2024, but maintains the ability to re-occupy the space subsequent to the expiration of the sub-lease. The Company has entered into an office lease in 2022 with approximately 7,600 square feet, suitable for its current needs. This newly leased space is intended to be utilized primarily for research and development, engineering and laboratory space.
Item 3. Legal Proceedings.

In the ordinary course of business we face various claims brought by third parties, and we may, from time to time, make claims or take legal actions to assert our rights, including intellectual property rights as well as claims relating to employment matters and the safety or efficacy of our products. Any of these claims could subject us to costly litigation, and, while we generally believe that we have adequate insurance to cover many different types of liabilities, our insurance carriers may deny coverage, may be inadequately capitalized to pay on valid claims, or our policy limits may be inadequate to fully satisfy any damage awards or settlements. If this were to happen, the payment of any such awards could have a material adverse effect on our business, financial condition and results of operations. Additionally, any such claims, whether or not successful, could damage our reputation and business.

In November 2021, two putative class action complaints were filed against us in the U.S. District Court for the Central District of California, the first captioned Butala v. Owlet, Inc., et al., Case No. 2:21-cv-09016, and the second captioned Cherian v. Owlet, Inc., et al., Case No. 2:21-cv-09293. Both complaints allege violations of the Securities Exchange Act of 1934 against the Company and certain of its officers and directors on behalf of a putative class of investors who: (a) purchased the Company’s common stock between March 31, 2021 and October 4, 2021;
62


or (b) held common stock in SBG as of June 1, 2021, and were eligible to vote in the Special Meeting held on July 14, 2021. Both complaints allege, among other things, that the Company and certain of its officers and directors made false and/or misleading statements and failed to disclose certain information regarding the FDA’s likely classification of the Owlet Smart Sock as a medical device requiring marketing authorization. The Court has pending before it motions to consolidate the Butala and Cherian cases and appoint a lead plaintiff. The Company intends to vigorously defend itself against these claims, including by filing a motion to dismiss on behalf of itself and the named officers and directors.
Item 4. Mine Safety Disclosures.
Not applicable.

1


PART II
Item 5. Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities.
Market information for Common Stock

Our common stock and our warrants to purchase our common stock are listed on the NYSE under the symbols “OWLT” and “OWLT WS”, respectively.
Holders of Record

As of March 16, 2022, there were 143 holders of record of our common stock and 4 holders of record of our warrants to purchase our common stock. The number of holders of record does not include a substantially greater number of “street name” holders or beneficial holders, whose shares and/or warrants are held of record by banks, brokers and other financial institutions.
Dividend Policy

We have never declared or paid dividends on our capital stock. We currently intend to retain any future earnings to fund the development and growth of our business, and therefore do not expect to pay any dividends in the foreseeable future. Any future determination as to the declaration and payment of dividends, if any, will be at the discretion of our board of directors, subject to compliance with contractual restrictions and covenants in the agreements governing our current and future indebtedness. Any such determination will also depend upon our business prospects, results of operations, financial condition, cash requirements and availability and other factors that our board of directors may deem relevant.

Recent Sales of Unregistered Securities; Purchases of Equity Securities by the Issuer or Affiliated Purchaser

Sales of Unregistered Equity Securities

The information required has been previously disclosed in our Current Report on Form 8-K filed with the Securities and Exchange Commission on July 21, 2021.

Use of Proceeds

On September 14, 2020, SBG consummated its initial public offering of 23,000,000 units, including 3,000,000 over-allotment units. The units were sold at an offering price of $10.00 per unit, generating total gross proceeds of $230.0 million. The securities in the offering were registered under the Securities Act on a registration statement on Form S-1 (No. 333-248320). The SEC declared the registration statement effective on September 14, 2020. Of the gross proceeds received from SBG’s initial public offering, the full exercise of the over-allotment option and the sale of private placement warrants in connection with the initial public offering, $230.0 million was placed in a trust account.

On July 15, 2021, we issued 12,968,000 shares of common stock as part of a PIPE financing at a price per share of $10.00, generating gross proceeds of $129,680,000 (the “PIPE Investment”).

After deducting payments to existing shareholders of approximately $197.6 million in connection with their exercise of redemption rights, the remaining balance immediately prior to the Closing (as defined herein) of approximately $32.4 million remained in the trust account. The remaining amount in the trust account and the PIPE Investment were used to fund the Merger and related transaction expenses.

Purchases of Equity Securities

We did not repurchase shares of our common stock during the three months ended December 31, 2021.
Item 6. [Reserved]
63



Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations.
Overview

The following discussion and analysis should be read in conjunction with the audited consolidated financial statements and notes thereto included elsewhere in this Annual Report (this "Report"). This discussion contains forward-looking statements about our business, operations and industry that involve risks and uncertainties, such as statement's regarding our plans, objectives, expectations and intentions. Our results may differ materially from those currently described in the sections entitled "Risk Factors" and "Cautionary Note Regarding Forward-Looking Statements" disclosed in this Report. Throughout this Item 7, unless otherwise noted, "we", "us", "our" and the "Company" refer to Owlet Baby Care Inc. and its consolidated subsidiary before the Merger transaction with Sandbridge Acquisition Corporation and to Owlet, Inc. and its consolidated subsidiaries after the Merger transaction with Sandbridge Acquisition Corporation.
Overview

Our mission is to empower parents with the right information at the right time, to give them more peace of mind and help them find more joy in the journey of parenting. Our digital parenting platform aims to give parents real-time data and insights to help parents feel calmer and more confident. We believe that every parent deserves peace of mind and the opportunity to feel their well-rested best. We also believe that every child deserves to live a long, happy, and healthy life, and we are working to develop products to help facilitate that belief.

Merger

On July 14, 2021, Sandbridge Acquisition Corporation ("SBG") held the Special Meeting of Stockholders (the "Special Meeting"), at which the SBG stockholders considered and adopted, among other matters, a proposal to approve the Merger Agreement and related transactions (the "Merger"). On July 15, 2021, the parties consummated the Merger. In connection with the Closing, SBG changed its name from Sandbridge Acquisition Corporation to Owlet, Inc. ("Owlet"). Following the consummation of the Merger, Owlet became an SEC-registrant and its common stock and warrants commenced trading on the New York Stock Exchange (‘‘NYSE’’) under the symbols “OWLT” and “OWLT WS”, respectively.

As a result of the Merger, each share of Owlet Baby Care Inc.'s preferred stock and common stock was converted into the right to receive approximately 2.053 shares of Owlet’s common stock, par value $0.0001 per share (“Common Stock”). Additionally, the shares of Sandbridge Class B common stock held by Sandbridge Acquisition Holdings automatically converted to 5,750,000 shares of Common Stock (of which 2,807,500 shares were subjected to certain vesting conditions). An aggregate of $197.6 million was paid from SBG's trust account to holders that properly exercised their right to have initial shares redeemed.

FDA Warning Letter

On October 1, 2021, the Company received a Warning Letter, dated the same date (the “Warning Letter”), from the U.S. Food and Drug Administration (“FDA”) regarding the Owlet Smart Sock. The Warning Letter asserts that the Company’s marketing of its Owlet Smart Sock product in the U.S. renders the Owlet Smart Sock a medical device requiring premarket clearance or approval from the FDA, and that the Company has not obtained such clearance or approval in violation of the Federal, Food, Drug, and Cosmetic Act. The Warning Letter is focused solely on the regulatory classification of the product in the U.S. as a result of the heart rate and oxygen notifications and related claims. Pursuant to the Warning Letter and in response to the request by the FDA to cease distribution of the Owlet Smart Sock in the U.S., the Company suspended distribution of the Owlet Smart Sock in the U.S. in October 2021. The suspension is specific to shipments by the Company to customers and retailers in the U.S. Operations in other countries remain unaffected. In response to the Warning Letter, several national retailers unilaterally suspended U.S. sales of the Owlet Smart Sock and Owlet Duo. During the fourth quarter of 2021, the Company agreed with certain customers and retailers to accept returns of the Owlet Smart Sock and Owlet Duo. The Company began initial distribution of the Owlet Dream Sock in December 2021 through our ecosystem partners and in January 2022 launched the Owlet Dream Sock to consumers in the retail and direct-to-consumer channels.

The Company's results of operations for the fourth quarter and year ended December 31, 2021 were substantially and negatively impacted due to the reversal of sales for received and anticipated returns of Owlet Smart Sock and Owlet Duo product. For the quarter and year ended December 31, 2021, the Company recorded contra-revenue of $23.2 million based on an estimate of customer returns. A refund liability of $20.1 million has been accrued as of December 31, 2021 in accrued and other expenses and represents the amount due to customers for returns that have not been received as of year-end. The Company also recorded a reduction to cost of revenues of $8.2 million for the year ended December 31, 2021 for the cost of the inventory associated with these customer returns. As of December 31, 2021, the Company has recorded $1.4 million within inventory for returned inventory received prior to year-end,
64


and a $6.7 million asset within prepaid expenses and other current assets for inventory expected to be returned but not yet received.

Impact of COVID-19

There continues to be worldwide impact from the novel coronavirus (“COVID-19”) pandemic. The impact of COVID-19 includes changes in consumer and business behavior, pandemic fears, market downturns, and restrictions on business and individual activities, which have created significant volatility in the global economy that has led to reduced economic activity. The full extent to which the COVID-19 pandemic will directly or indirectly impact our cash flow, business, financial condition, results of operations and prospects will depend on future developments that are uncertain.

As a result of the COVID-19 pandemic, we have safety procedures in place at our headquarters and encourage our employees and contractors to work remotely, where possible, in accordance with local public health recommendations, each of which represented a significant change in how we operate our business. In light of the pandemic, we expect to continue to take actions as may be required or recommended by government authorities or as we determine are in the best interest of our employees.

We have experienced relatively minor impacts on our inventory availability and delivery capacity since the outbreak, neither of which has materially impacted our ability to service our customers. We continue to work with our existing manufacturing, logistics and other supply chain partners to build key processes to ensure that our ability to service our customers is not significantly disrupted. Ongoing actions to bolster key aspects of the supply chain to support our continued growth include geographically diversifying manufacturing operations to ensure adequate manufacturing capacity and to shorten transit times, implementing alternative order fulfillment options to reduce warehousing costs, developing contingency plans for unexpected third-party manufacturing disruptions, and increasing headcount dedicated to managing and optimizing supply chain processes. We have experienced cost inflation resulting from the increased demand for raw materials and distribution services associated with the impact of COVID-19.

Components of Operating Results

Revenues

We recognize revenue from the following sources: (1) products, (2) mobile applications, and (3) content. Revenues are recognized when control of goods and services is transferred to customers in an amount that reflects the consideration expected to be received by us in exchange for those goods and services. Substantially all of the Company's revenues were derived from product sales.

Cost of Revenues

Cost of revenues consists of product costs, including contract manufacturing, shipping and handling, depreciation and amortization relating to tooling and manufacturing equipment and software, warranty replacement, fulfillment costs, warehousing, hosting, and reserves for excess and obsolete inventory.

Operating Expenses

General and Administrative. General and administrative expenses consist primarily of salaries, benefits, stock-based compensation, and bonuses for finance and accounting, legal, human resources and administrative executives and employees; third-party legal, accounting, and other professional services; corporate travel and entertainment; depreciation and amortization of property and equipment; and facilities rent.

We expect that our general and administrative expenses will increase in future periods compared to periods prior to the Merger as a result of additional costs related to being a public company, including Securities Exchange Act of 1934, as amended (the “Exchange Act”) reporting expenses; expenses associated with Sarbanes-Oxley compliance; incremental independent auditor fees; incremental legal fees; investor relations expenses; registrar and transfer agent fees; incremental director and officer liability insurance costs; and director compensation.

Sales and Marketing. Sales and marketing expenses consist primarily of salaries, commissions, benefits, stock-based compensation, commissions, and bonuses for sales and marketing employees and contractors; third-party marketing expenses such as social media and search engine marketing; email marketing and print marketing.

We expect sales and marketing expense to continue to increase in future periods as we drive sales growth through new and existing marketing initiatives and expand into additional international markets.

65


Research and Development. Research and development expenses consist primarily of salaries, benefits, stock-based compensation, and bonuses for employees and contractors engaged in the design, development, maintenance and testing of our products and platforms.

We anticipate making significant investments in the development of our monitoring pipeline in future periods and expect our research and development expenses to increase.

Other Income (Expense)

Gain on Loan Forgiveness. Gain on loan forgiveness consists of the gain recognized subsequent to the forgiveness of the Small Business Administration Paycheck Protection Program loan.

Interest Expense, Net. Interest expense consists of interest incurred on our outstanding borrowings and amortization of the associated deferred financing costs net of interest income earned on our money market account.

Interest Expense from Contingent Beneficial Conversion Feature. Interest expense from contingent beneficial conversion feature relates to a charge associated with the contingent beneficial conversion feature described in Part II. Item 8. "Financial Statements and Supplementary Data - Note 7," included in this Report.

Preferred Stock Warrant Liability Adjustment. Mark to market adjustment to recognize the change in fair value of the preferred stock warrant liability in other income (expense).

Common Stock Warrant Liability Adjustment. Mark to market adjustment to recognize the change in fair value of the common stock warrant liability in other income (expense).

Other Income (Expense), Net. Other income (expense), net includes our net gain (loss) on foreign exchange transactions and loss on extinguishment of debt.

Income Tax Provision. Income tax provision consists primarily of U.S. federal and state income taxes related to the tax jurisdictions in which we conduct business.
66




Results of Operations

The following table sets forth our results of operations for the periods indicated in millions (note that amounts within this Item 7 shown in millions may not sum due to rounding):

For the years ended December 31,
2021 2020
Revenues $ 75.8  $ 75.4 
Cost of revenues 40.8  39.5 
Gross profit 35.1  35.9 
Operating expenses:
General and administrative 32.3  13.1 
Sales and marketing 37.1  19.3 
Research and development 21.4  10.5 
Total operating expenses 90.9  42.9 
Operating loss (55.8) (7.0)
Other income (expense):
Gain on loan forgiveness 2.1  — 
Interest expense, net (1.8) (1.4)
Interest expense from contingent beneficial conversion feature (26.1) — 
Preferred stock warrant liability adjustment (5.6) (2.0)
Common stock warrant liability adjustment 15.7  — 
Other income (expense), net (0.3) (0.2)
Total other income (expense), net (15.9) (3.5)
Loss before income tax provision (71.7) (10.5)
Income tax provision 0.0  0.0 
Net loss and comprehensive loss $ (71.7) $ (10.5)



Revenues
For the years ended December 31, Change
(dollars in millions) 2021 2020 $ %
Revenues $ 75.8  $ 75.4  $ 0.4  0.6  %

Revenues increased by $0.4 million, or 0.6%, from $75.4 million for the year ended December 31, 2020 to $75.8 million for the year ended December 31, 2021. The increase was due to an increase of revenues during the first nine months of 2021 of $23.9 million, primarily from increased sales volume of the Owlet Smart Sock. The increase during the first nine months of 2021 was substantially offset by net contra-revenue in the fourth quarter of 2021 due to the impact of the Warning Letter. During the fourth quarter of 2021 and for the year ended December 31, 2021, the Company recorded a contra-revenue adjustment of $23.2 million resulting from received and anticipated returns of the Owlet Smart Sock and Owlet Duo product from U.S. retailers.


67


Cost of Revenues and Gross Profit

For the years ended December 31, Change
(dollars in millions) 2021 2020 $ %
Cost of revenues $ 40.8  $ 39.5  $ 1.3  3.2  %
Gross profit $ 35.1  $ 35.9  $ (0.8) (2.3  %)
Gross margin 46.2  % 47.6  %

Cost of revenues increased by $1.3 million, or 3.2%, from $39.5 million for the year ended December 31, 2020 to $40.8 million for the year ended December 31, 2021. The increase was primarily due to cost inflation, including increased material, transportation, and hosting costs, partially offset by lower warranty expense. The decrease in warranty expense was partially attributable to the significant decrease in product shipment during the fourth quarter of 2021. Gross margin decreased from 47.6% for the year ended December 31, 2020 to 46.2% for the year ended December 31, 2021 primarily due to higher returns and cost inflation partially offset by lower warranty expense.


General and Administrative

For the years ended December 31, Change
(dollars in millions) 2021 2020 $ %
General and administrative $ 32.3  $ 13.1  $ 19.2  146.1  %

General and administrative expense increased by $19.2 million, or 146.1%, from $13.1 million for the year ended December 31, 2020 to $32.3 million for the year ended December 31, 2021. The increase was driven primarily by compensation expense, including share-based compensation, from additional general and administrative headcount. Additionally, the Company saw an increase in legal, accounting, and consulting costs related to the Merger as well as incremental ongoing costs of being a public company.


Sales and Marketing

For the years ended December 31, Change
(dollars in millions) 2021 2020 $ %
Sales and marketing $ 37.1  $ 19.3  $ 17.8  92.5  %

Sales and marketing expense increased by $17.8 million, or 92.5%, from $19.3 million for the year ended December 31, 2020 to $37.1 million for the year ended December 31, 2021. The increase was primarily driven by increases in digital advertising and retail channel marketing spend and an increase in compensation expense, including share-based compensation, from additional sales and marketing headcount.


Research and Development

For the years ended December 31, Change
(dollars in millions) 2021 2020 $ %
Research and development $ 21.4  $ 10.5  $ 11.0  104.7  %

Research and development expense increased by $11.0 million, or 104.7%, from $10.5 million for the year ended December 31, 2020 to $21.4 million for the year ended December 31, 2021. These increases were primarily driven by an increase in compensation expense, including share-based compensation, from additional research and development headcount and an increase in consulting expenses.



68


Other Income (Expense)

For the years ended December 31, Change
(dollars in millions) 2021 2020 $ %
Gain on loan forgiveness $ 2.1  $ —  $ 2.1  NM
Interest expense, net $ (1.8) $ (1.4) $ (0.4) 28.2  %
Interest expense from contingent beneficial conversion feature $ (26.1) $ —  $ (26.1) NM
Preferred stock warrant liability adjustment $ (5.6) $ (2.0) $ (3.6) 185.8  %
Common stock warrant liability adjustment $ 15.7  $ —  $ 15.7  NM
Other income, net $ (0.3) $ (0.2) $ (0.1) 77.8  %
NM - Not meaningful

For the year ended December 31, 2021, we recognized a gain of $2.1 million on the forgiveness of our SBA PPP loan.

For the year ended December 31, 2021, we recognized interest expense from the contingent beneficial conversion feature as a charge recorded at the date of the Merger, which is described in the notes to the consolidated financial statements in Item 8.

For the year ended December 31, 2021, we recognized a loss of $5.6 million for the year ended December 31, 2021 resulting from the increase in the fair value of the preferred stock warrants prior to the Merger. We recognized a gain of $15.7 million for the mark to market adjustment for common stock warrants resulting from the decrease in the fair value of the common stock warrants assumed in the Merger.



Liquidity and Capital Resources

Prior to the Merger, we funded our operations primarily with proceeds from issuances of our convertible preferred stock, borrowings under our loan facilities, issuances of convertible promissory notes, and sales of our products and services. As of December 31, 2021, we had cash and cash equivalents of $95.1 million.

Funding Requirements

Since inception, we have generated recurring losses which have resulted in an accumulated deficit of $143.4 million and $71.7 million as of December 31, 2021 and December 31, 2020, respectively, and we expect to incur additional losses in the future. On July 15, 2021, we consummated the Merger and received approximately $133.9 million in net proceeds from the Merger and PIPE Investment. Therefore, as of the date on which these consolidated financial statements were issued, the Company believes that its cash on hand, together with cash generated from sales to customers, will satisfy its working capital and capital requirements for at least the next twelve months. However, we are still in the growth stage of our business and expect to continue to make substantial investments in our business, including in the expansion of our product portfolio and in our research and development, sales and marketing teams, in addition to incurring additional costs as a result of being a public company. There can be no assurance that we will be able to obtain additional debt or equity financing on terms acceptable to us, if at all, or that we will generate sufficient future revenues. Failure to secure additional funding may require us to modify, delay, or abandon some of our planned future expansion or development, or to otherwise enact operating cost reductions available to management, which could have a material adverse effect on our business, operating results, financial condition, and ability to achieve our intended business objectives.

Loan and Security Agreement with Silicon Valley Bank

As of December 31, 2021 we had an amended and restated loan and security agreement (the "A&R LSA") with Silicon Valley Bank (‘‘SVB’’) which we entered into on April 22, 2020, and which replaced the loan and security agreement previously in place (the ‘‘Original LSA’’). These agreements provided us with both a line of credit (the ‘‘SVB Revolver’’) and a term loan (the ‘‘Term Note’’).

69


Our borrowing capacity under the SVB Revolver was $17.5 million as of December 31, 2021. The SVB Revolver is an asset based lending facility subject to borrowing base capacity which is limited by borrowing base calculations based on the sum of specified percentages of eligible accounts receivable and eligible inventory. As of December 31, 2021, the SVB Revolver bore interest at an annual rate equal to (i) the greater of the bank’s prime rate plus 0.75%, or 5.50% when a streamline period is in effect and (ii) the greater of the bank’s prime rate plus 1.25%, or 6.00% at all other times. Each streamline period commences the first day of the month following a written report of our liquidity and ends the first day after we fail to maintain a required cash and cash availability streamline threshold, provided no event of default has occurred and is continuing. If an event of default has occurred and is continuing, SVB may maintain our streamline status at its discretion. The required cash and cash availability streamline threshold was $8.0 million as of December 31, 2021, and we were within a streamline period. The actual interest rate on the SVB Revolver was 5.50% as of December 31, 2021. The SVB Revolver is subject to renewal and is scheduled to mature on April 22, 2024. As of December 31, 2021, there were no outstanding borrowings under the SVB Revolver.

Our Term Note had an aggregate principal balance of $14.0 million as of December 31, 2021, bore interest at a rate equal to the greater of the bank's prime rate plus 3.50%, or 6.50%, and required 30 consecutive equal monthly payments of principal beginning on November 1, 2021. The Term Note matures on April 1, 2024.

Our borrowings under the A&R LSA and its subsequent amendments are secured by substantially all of our current and future assets.

On January 31, 2022, the Company further amended the A&R LSA, which modified the Term Note annual interest rate equal to the greater of the bank’s prime rate plus 2.50% or 5.75%, modified the SVB Revolver annual interest rate equal to (i) the greater of the bank’s prime rate plus 0.75% or 5.00% when the streamline period is in effect and (ii) the greater of the bank’s prime rate plus 1.25% or 5.00% at all other times, and decreased the advance rate for borrowing base receivables and inventory, and increased the cash and cash availability streamline threshold from $8,000 to $50,000.

The amendment replaced the existing EBITDA covenant for 2022 and beyond with a net revenue covenant and increased the minimum cash and cash availability threshold from $5.0 million to $30.0 million.

Financed Insurance Premium

In September 2020, the Company entered into a short-term commercial premium finance agreement with AFCO Credit Corporation for various corporate liability insurance policies totaling $0.6 million to be paid in eight equal monthly payments. The financed insurance premium accrued interest at a rate of 4.09%. As of December 31, 2020, the remaining principal balance on the financed insurance premium was $0.3 million.

During the year ended December 31, 2021, the Company renewed its corporate liability policies and entered into several new short-term commercial premium finance agreements with AFCO Credit Corporation totaling $4.7 million to be paid in ten equal monthly payments, all of which accrue interest at a rate of 3.59%. As of December 31, 2021, the remaining principal balance on the financed insurance premium was $2.5 million.

Paycheck Protection Program Loan

In April 2020, we applied for and received proceeds from the U.S. Small Business Administration (‘‘SBA’’) Paycheck Protection Program (‘‘PPP’’) in the amount of $2.1 million, with SVB as lender for the loan (the ‘‘PPP Loan’’), under the Federal Coronavirus Aid, Relief, and Economic Security Act (the ‘‘CARES Act’’). The PPP Loan was considered necessary to support our ongoing operations due to economic uncertainty at the time resulting from the COVID-19 pandemic and reduced access to alternative sources of liquidity.

Under the terms of the PPP Loan, interest accrued on the outstanding principal at a rate of 1.0% per annum. The CARES Act and the PPP provide a mechanism for forgiveness of up to the full amount borrowed. Under the PPP, we applied for forgiveness for all of the PPP Loan. On June 15, 2021, we received forgiveness for the PPP loan for the full amount of $2.1 million of principal. As a result of the PPP loan being forgiven, we recognized a $2.1 million gain for the year ended December 31, 2021.


70


Cash Flows

The following table summarizes our cash flow (in millions):
Year Ended December 31,
2021 2020
Net cash used in operating activities $ (40.6) $ (0.1)
Net cash used in investing activities (2.0) (1.1)
Net cash provided by financing activities 120.6  6.5 
Net change in cash and cash equivalents $ 78.0  $ 5.3 

Operating Activities

For the year ended December 31, 2021, net cash used in operating activities was $40.6 million as compared to net cash used in operating activities of $0.1 million in the prior year. The change in operating cash flows was primarily driven by a higher net loss. The higher net loss was partially offset by higher non-cash charges, net, primarily driven by the interest expense from contingent beneficial conversion features, and a larger net decrease in net assets and liabilities as compared to the prior year, primarily driven by an increase in accrued returns from accepted and anticipated customer returns for products subject to the Warning Letter. The Company expects the settlement of the higher accrued returns resulting from the Warning Letter to have a negative impact to cash flows from operations for 2022.

Investing Activities

For the year ended December 31, 2021, net cash used in investing activities increased to $2.0 million from $1.1 million for the year ended December 31, 2020 due to higher purchases of intangible assets. We expect our capital expenditures to continue to grow in future periods, primarily driven by investments to expand our production capabilities to additional factories in other geographical locations, as well as investments in tooling and equipment to manufacture new products.

Financing Activities

For the year ended December 31, 2021, net cash provided by financing activities increased to $120.6 million from $6.5 million for the year ended December 31, 2020, primarily driven by cash provided from the reverse recapitalization and PIPE financing, partially offset by higher net repayment on our line of credit.


Indemnification

In the ordinary course of business, we enter into agreements that may include indemnification provisions. Pursuant to such agreements, we may indemnify, hold harmless, and defend an indemnified party for losses suffered or incurred by the indemnified party. Some of the provisions will limit losses to those arising from third-party actions. In some cases, the indemnification will continue after the termination of the agreement. The maximum potential amount of future payments we could be required to make under these provisions is not determinable. We have never incurred material costs to defend lawsuits or settle claims related to these indemnification provisions.

In connection with the consummation of the Merger, we entered into indemnification agreements with our directors and officers that may require us to indemnify our directors and officers against liabilities that may arise by reason of their status or service as directors or officers to the fullest extent permitted by Delaware corporate law. We currently have directors’ and officers’ insurance coverage that reduces our exposure and enables us to recover a portion of any future amounts paid. We believe the estimated fair value of these indemnification agreements in excess of applicable insurance coverage is immaterial.

Critical Accounting Policies and Estimates

Our significant accounting policies are fundamental to understanding our results of operations and financial condition as they require that we use estimates and assumptions that may affect the value of our assets or liabilities and financial results. For a summary of the Company’s significant accounting policies, estimates, and methods used in the preparation of the consolidated financial statements, see Part II. Item 8. "Financial Statements and Supplementary Data” - Note 1.

The accounting policies and estimates described below are those the Company considers most critical in preparing its consolidated financial statements because they require management to make subjective and complex judgments
71


about matters that are inherently uncertain. Actual results may differ from these estimates under different assumptions or conditions.

Sales Returns, Rebates, Discounts, and Allowances

Our contract liabilities include promises to provide customers rights of return as well as promises to issue discounts and provide rebates or allowances to certain retail channel customers if specified conditions are met. Revenues are reduced in the accompanying consolidated statements of operations and comprehensive loss for anticipated sales returns, discounts, and allowances, based on our analysis of historical sales returns and contractual discounts and allowances. Expected returns, as well as estimated discounts and allowances that have been earned but not yet honored or paid out, are included in accrued and other expenses in the accompanying balance sheets. Actual returns may vary from estimates if we experience a change in actual sales returns or exchange patterns due to unanticipated changes in products or competitive pressures.

Sales return rates, excluding the impact of regulatory actions, have been sufficiently predictable to allow us to estimate expected future returns. We review the actual returns as a percentage of sales to determine the historical rate of return. The historical rate of return is used as a basis for estimating future returns based on current sales. The sales return estimate can be affected by the release of new products and changes to sales channels. Actual returns may vary from estimates if we experience a change in actual sales returns or exchange patterns due to unanticipated changes in products, competitive pressures, or regulatory actions. As a result of the FDA Warning Letter received October 1, 2021, the Company's results of operations for the fourth quarter and year-ended 2021 were substantially and negatively impacted due to the reduction of revenues for received and anticipated returns of Owlet Smart Sock and Owlet Monitor Duo product. For the quarter and year ended December 31, 2021, the Company recorded contra-revenue of $23.2 million and accrued returns of $20.1 million as of December 31, 2021.

Sales rebates, discounts, and allowances provided to our customers have been sufficiently predictable to allow us to estimate expected future discounts and allowances. Discounts and allowances are estimable based on existing and expected promotional programs and contractual terms in place at the time of sale. New promotional programs or changes to existing promotional programs could impact the estimated sales rebates, discounts, and allowances

The estimates and assumptions used to reserve for rights of return, rebates, discounts, and allowances have been accurate in all material respects and have not materially changed in the past.

Warranty Reserves

Our products include an assurance-type limited warranty. The estimated warranty costs, which are expensed at the time of sale and included in cost of revenues, are based on the results of historical trends and warranty claim rates incurred and are adjusted for any current or expected trends as appropriate. The warranty reserve estimate can be affected by the release of new products or updates which could have failure rates that differ from historical products. We regularly assess and adjust the estimate of accrued warranty claims by updating claims rates for actual trends and projected claim costs.

Determination of the Fair Value of Common Stock Prior to Merger

For the period during which the Company's common stock was not publicly traded, the estimated fair value of our common stock has been determined by our Board as of the date of each option award grant with input from management, considering our most recently available third-party valuation of common stock, and our Board’s assessment of additional objective and subjective factors that it believed were relevant and which may have changed from the date of the most recent valuation through the date of the grant. We believe that the Board has the relevant experience and expertise to determine fair value of our common stock. Third-party valuations were performed in accordance with the guidance outlined in the American Institute of Certified Public Accountants’ Accounting and Valuation Guide, Valuation of Privately-Held-Company Equity Securities Issued as Compensation. Management has considered numerous factors in determining the best estimate of fair value of our common stock, including the following:
valuation performed by unrelated third-party specialists;
our operating results, financial position and capital resources;
our stage of development and current business conditions and projections, including the introduction of new products;
the lack of marketability of our common stock;
the hiring of key personnel and the experience of our management;
72


the likelihood of achieving a liquidity event, such as an initial public offering or a sale of our company given the prevailing market conditions;
the nature and history of our business;
industry trends and the competitive environment;
illiquidity of stock-based awards involving securities in a private company; and
the overall economic, regulatory, and capital market conditions.
The assumptions underlying these valuations were highly complex and subjective and represented management’s best estimates, which involved inherent uncertainties and the application of management’s judgment. As a result, if we had used significantly different assumptions or estimates, the fair value of our common stock and our stock-based compensation expense could be materially different.

Since a public trading market for our common stock has been established after the Merger, it will no longer be necessary for our Board to estimate the fair value of our common stock in connection with our accounting for granted stock options and other such awards we may grant, as the fair value of our common stock will be determined based on the quoted market price of our common stock.

Preferred Stock Warrant Liability

We classify warrants to purchase shares of our redeemable convertible preferred stock as a liability on our consolidated balance sheets as each warrant is a free-standing instrument that may require us to transfer consideration upon exercise. The preferred stock warrants were settled immediately prior to the Merger on July 15, 2021, as further described in Part II. Item 8. "Financial Statements and Supplementary Data - Note 3."

Each warrant is initially recorded at fair value upon issuance, net of issuance costs, using the Black-Scholes option pricing model, and is subsequently re-measured to fair value at each subsequent balance sheet date. Changes in fair value of warrants are recognized as a component of preferred stock warrant liability adjustment in the consolidated statements of operations and comprehensive loss.

The Black-Scholes valuation model requires significant estimates including the expected volatility of our common stock, expected dividend yield, option term and risk-free rate. We derive our volatility from the average historical stock volatilities of peer public companies over a period equivalent to the expected term of the awards. As our historical share option exercise experience does not provide a reasonable basis upon which to estimate the expected term, we estimate the expected term using the simplified method based on the vesting and contractual terms of the award. Under the simplified method, the expected term is equal to the average of the stock-based award’s weighted average vesting period and its contractual term. The risk-free interest rate is based on the U.S. Treasury yield curve in effect at the time of grant. Expected dividend yield is 0.0% as we do not anticipate paying dividends on our common stock for the foreseeable future.

Income Taxes

In evaluating the ability to recover our deferred income tax assets, we consider all available positive and negative evidence, including our operating results, ongoing tax planning and forecasts of future taxable income on a jurisdiction-by-jurisdiction basis. In the event we determine that we would be able to realize our deferred tax assets in the future in excess of their net recorded amount, we would make an adjustment to the valuation allowance that would reduce the provision for income taxes. Conversely, in the event that all or part of the net deferred tax assets are determined to not be realizable in the future, an adjustment to the valuation allowance would be charged to earnings in the period when such a determination is made. As of December 31, 2021 and December 31, 2020, we recorded a full valuation allowance on our deferred tax assets.

Uncertain tax positions are recorded when it is more likely than not that a given tax position would not be sustained upon examination by taxing authorities. Based on positions taken in our tax filings, we concluded that there are no significant uncertain tax positions requiring disclosure as of December 31, 2021 and December 31, 2020, and that there are no material amounts of unrecognized tax benefits. Our policy for recording interest and penalties related to income taxes, including uncertain tax positions, is to record such items as a component of the provision for income taxes.

Emerging Growth Company Status

Following the Merger, we qualify as an emerging growth company (‘‘EGC’’) as defined in the Jumpstart our Business Startups (‘‘JOBS’’) Act. The JOBS Act permits companies with EGC status to take advantage of an extended transition period to comply with new or revised accounting standards, delaying the adoption of these accounting standards until they would apply to private companies. We intend to use this extended transition period
73


to enable us to comply with new or revised accounting standards that have different effective dates for public and private companies until the earlier of the date we (i) are no longer an EGC or (ii) affirmatively and irrevocably opt out of the extended transition period provided in the JOBS Act. As a result, our consolidated financial statements may not be comparable to companies that comply with the new or revised accounting standards as of public company effective dates.

In addition, we intend to rely on the other exemptions and reduced reporting requirements provided by the JOBS Act. Subject to certain conditions set forth in the JOBS Act, as an EGC, we are not required to, among other things: (i) provide an auditor’s attestation report on our system of internal control over financial reporting pursuant to Section 404(b) of the Sarbanes-Oxley Act; (ii) provide all of the compensation disclosures that may be required of non-EGCs under the Dodd-Frank Wall Street Reform and Consumer Protection Act; (iii) comply with the requirements of the Public Company Accounting Oversight Board regarding the communication of critical audit matters in the auditor’s report on the consolidated financial statements (auditor discussion and analysis); and (iv) disclose certain executive compensation-related items such as the correlation between executive compensation and performance and comparisons of the Chief Executive Officer’s compensation to median employee compensation.

We anticipate that we will remain an EGC under the JOBS Act until the earliest of (i) December 31, 2025, (ii) the last date of our fiscal year in which we have total annual gross revenues of at least $1.07 billion, (iii) the date on which we are deemed to be a ‘‘large accelerated filer’’ under the rules of the SEC, or (iv) the date on which we have issued more than $1.0 billion in non-convertible debt securities during the previous three years.

Smaller Reporting Company

Additionally, we are a “smaller reporting company” as defined in Item 10(f)(1) of Regulation S-K. Smaller reporting companies may take advantage of certain reduced disclosure obligations, including, among other things, providing only two years of audited consolidated financial statements. We will remain a smaller reporting company until the last day of the fiscal year in which (i) the market value of our Common Stock held by non-affiliates exceeds $250 million as of the prior June 30, or (ii) our annual revenues exceeded $100 million during such completed fiscal year and the market value of our Common Stock held by non-affiliates exceeds $700 million as of the prior June 30.

Item 7A. Quantitative and Qualitative Disclosures About Market Risk.

We are a smaller reporting company as defined by Rule 12b-2 of the Exchange Act and are not required to provide the information otherwise required under this Item.
74



Item 8. Financial Statements and Supplementary Data.

INDEX TO CONSOLIDATED FINANCIAL STATEMENTS



75


Report of Independent Registered Public Accounting Firm
To the Board of Directors and Stockholders of Owlet, Inc.

Opinion on the Financial Statements

We have audited the accompanying consolidated balance sheets of Owlet, Inc. and its subsidiaries (the “Company”) as of December 31, 2021 and 2020, and the related consolidated statements of operations and comprehensive loss, of redeemable convertible preferred stock and stockholders' equity (deficit) and of cash flows for the years then ended, including the related notes (collectively referred to as the “consolidated financial statements”). In our opinion, the consolidated financial statements present fairly, in all material respects, the financial position of the Company as of December 31, 2021 and 2020, and the results of its operations and its cash flows for the years then ended in conformity with accounting principles generally accepted in the United States of America.

Basis for Opinion

These consolidated financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on the Company’s consolidated financial statements based on our audits. We are a public accounting firm registered with the Public Company Accounting Oversight Board (United States) (PCAOB) and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.

We conducted our audits of these consolidated financial statements in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audits to obtain reasonable assurance about whether the consolidated financial statements are free of material misstatement, whether due to error or fraud.

Our audits included performing procedures to assess the risks of material misstatement of the consolidated financial statements, whether due to error or fraud, and performing procedures that respond to those risks. Such procedures included examining, on a test basis, evidence regarding the amounts and disclosures in the consolidated financial statements. Our audits also included evaluating the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the consolidated financial statements. We believe that our audits provide a reasonable basis for our opinion.


/s/ PricewaterhouseCoopers LLP

Salt Lake City, Utah
March 25, 2022

We have served as the Company’s auditor since 2020.
76


Owlet, Inc.
Consolidated Balance Sheets
(in thousands, except share and per share amounts)

Assets December 31, 2021 December 31, 2020
Current assets:
Cash and cash equivalents $ 95,054  $ 17,009 
Accounts receivable, net of allowance for doubtful accounts of $403 and $201, respectively
10,468  10,525 
Inventory 17,980  7,912 
Prepaid expenses and other current assets 12,313  2,168 
Total current assets 135,815  37,614 
Property and equipment, net 1,870  1,718 
Intangible assets, net 1,696  605 
Other assets 666  181 
Total assets $ 140,047  $ 40,118 
Liabilities, Redeemable Convertible Preferred Stock, and Stockholders’ Equity (Deficit)
Current liabilities:
Accounts payable $ 27,765  $ 16,379 
Accrued and other expenses 31,730  10,592 
Current portion of deferred revenues 1,061  1,643 
Line of credit —  9,700 
Current portion of related party convertible notes payable —  6,934 
Current portion of long-term debt 8,534 2,024 
Total current liabilities 69,090  47,272 
Long-term debt, net 7,993  10,180 
Preferred stock warrant liability —  2,993 
Common stock warrant liability 7,061  — 
Other long-term liabilities 712  494 
Total liabilities 84,856  60,939 
Commitments and contingencies (Note 8)
Redeemable convertible Series A and Series A-1 preferred stock, $0.0001 par value, 0 and 23,030,285 shares authorized as of December 31, 2021 and December 31, 2020, respectively; 0 and 46,395,823 shares issued and outstanding as of December 31, 2021 and December 31, 2020, respectively
—  23,652 
Redeemable convertible Series B and Series B-1 preferred stock, $0.0001 par value, 0 and 7,507,073 shares authorized as of December 31, 2021 and December 31, 2020, respectively; 0 and 15,413,489 shares issued and outstanding as of December 31, 2021 and December 31, 2020, respectively
—  23,536 
Stockholders’ equity (deficit):
Common stock, $0.0001 par value, 1,000,000,000 and 52,000,000 shares authorized as of December 31, 2021 and December 31, 2020, respectively; 112,996,568 and 22,118,619 shares issued and outstanding as of December 31, 2021 and December 31, 2020, respectively.
11 
Additional paid-in capital 198,602  3,707 
Accumulated deficit (143,422) (71,718)
Total stockholders’ equity (deficit) 55,191  (68,009)
Total liabilities, redeemable convertible preferred stock, and stockholders’ equity (deficit) $ 140,047  $ 40,118 
The accompanying notes are an integral part of these consolidated financial statements.



77


Owlet, Inc.
Consolidated Statements of Operations and Comprehensive Loss
(in thousands, except share and per share amounts)

For the years ended December 31,
2021 2020
Revenues $ 75,842  $ 75,403 
Cost of revenues 40,784  39,526 
Gross profit 35,058  35,877 
Operating expenses:
General and administrative 32,339  13,140 
Sales and marketing 37,084  19,263 
Research and development 21,427  10,465 
Total operating expenses 90,850  42,868 
Operating loss (55,792) (6,991)
Other income (expense):
Gain on loan forgiveness 2,098  — 
Interest expense, net (1,772) (1,382)
Interest expense from contingent beneficial conversion feature (26,061) — 
Preferred stock warrant liability adjustment (5,578) (1,952)
Common stock warrant liability adjustment 15,745  — 
Other income (expense), net (313) (176)
Total other income (expense), net (15,881) (3,510)
Loss before income tax provision (71,673) (10,501)
Income tax provision (31) (20)
Net loss and comprehensive loss $ (71,704) $ (10,521)
Net loss per share attributable to common stockholders, basic and diluted $ (1.13) $ (0.48)
Weighted-average number of shares outstanding used to compute net loss per share attributable to common stockholders, basic and diluted 63,216,912  21,956,848 
The accompanying notes are an integral part of these consolidated financial statements.

78


Owlet, Inc.
Consolidated Statements of Redeemable Convertible Preferred Stock and Stockholders’ Equity (Deficit)
(in thousands, except share and per share amounts)

Preferred Stock
Series A (1)
Preferred Stock
Series A-1 (1)
Preferred Stock
Series B (1)
Preferred Stock
Series B-1 (1)
Common Stock (1)
Shares Amount Shares Amount Shares Amount Shares Amount Shares Amount Additional Paid-in
Capital
Accumulated
Deficit
Total Stockholders'
 Equity (Deficit)
Balance as of December 31, 2019
26,157,622  $ 9,569  20,238,201  $ 14,083  12,366,306  $ 18,854  3,047,183  $ 4,682  21,700,713  $ $ 2,293  $ (61,197) $ (58,902)
Issuance of common stock warrants in connect with debt amendment and new debt issuance —  —  —  —  —  —  —  —  —  226 226
Issuance of common stock upon exercise of stock options —  —  —  —  —  —  —  —  417,906  118 118
Stock-based compensation —  —  —  —  —  —  —  —  —  1,070 1,070
Net loss —  —  —  —  —  —  —  —  —  (10,521) (10,521)
Balance as of December 31, 2020
26,157,622  9,569  20,238,201  14,083  12,366,306  18,854  3,047,183  4,682  22,118,619  3,707  (71,718) (68,009)
Conversion of redeemable convertible preferred stock into common stock in connection with the reverse recapitalization (Note 3) (26,157,622) (9,569) (20,238,201) (14,083) (12,366,306) (18,854) (3,047,183) (4,682) 61,809,312  6 47,182 47,188
Conversion of convertible promissory notes to common stock in connection with the reverse recapitalization (Note 3) —  —  —  —  —  —  —  —  4,633,507  1 7,121 7,122
Beneficial conversion feature of convertible promissory notes in connection with the reverse recapitalization (Note 3) —  —  —  —  —  —  —  —  —  26,061 26,061
Conversion of preferred stock warrants and common stock warrants in connection with the reverse recapitalization (Note 3) —  —  —  —  —  —  —  —  1,771,231  8,571 8,571
Reverse recapitalization transaction, net of fees —  —  —  —  —  —  —  —  21,959,227  2 101,259 101,261
Issuance of common stock upon exercise of stock options —  —  —  —  —  —  —  —  704,672  442  442
Stock-based compensation —  —  —  —  —  —  —  —  4,259  4,259
Net loss —  —  —  —  —  —  —  —  —  (71,704) (71,704)
Balance as of December 31, 2021
—  $ —  —  $ —  —  $ —  —  $ —  112,996,568  $ 11  $ 198,602  $ (143,422) $ 55,191 
(1) The shares of the Company’s common and redeemable convertible preferred stock, prior to the Merger (see Note 3), have been retrospectively adjusted as shares reflecting the exchange ratio of approximately 2.053 established in the Merger (see Note 3).

The accompanying notes are an integral part of these consolidated financial statements.
79


Owlet, Inc.
Consolidated Statements of Cash Flows
for the Years ended December 31, 2021 and 2020
(in thousands)
For the Years Ended December 31,
2021 2020
Cash flows from operating activities:
Net loss $ (71,704) $ (10,521)
Adjustments to reconcile net loss to net cash (used in) provided by operating activities:
Depreciation and amortization 1,133  873 
Non-cash gain on forgiveness of debt (2,098) — 
Share-based compensation 4,259  1,070 
Write-down of inventory to net realizable value 1,581  417 
Interest expense from contingent beneficial conversion feature 26,061  — 
Common stock warrant liability adjustment (15,745) — 
Preferred stock warrant liability adjustment 5,578  1,952 
Other adjustments, net 725  391 
Changes in assets and liabilities:
Accounts receivable (144) (2,962)
Prepaid expenses and other assets (10,493) (989)
Inventory (11,649) (3,468)
Accounts payable and accrued and other expenses 32,117  11,818 
Deferred revenues (567) 957 
Other, net 390  333 
Net cash used in operating activities (40,556) (129)
Cash flows from investing activities
Purchase of property and equipment (969) (967)
Purchase of intangible assets (1,051) (89)
Net cash used in investing activities (2,020) (1,056)
Cash flows from financing activities
Proceeds from short-term borrowings 13,708  12,953 
Payments of short-term borrowings (21,194) (11,687)
Proceeds from long-term borrowings 5,000  3,000 
Payments of long-term borrowings (1,000) —