UNITED STATES SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

 

FORM 10-K

 

(Mark One)

x  ANNUAL REPORT UNDER SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

 

For the fiscal year ended: December 31, 2019

 

¨  TRANSITION REPORT UNDER SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

 

For the transition period from [             ] to [             ]

 

Commission file number 000-55564

 

KULR TECHNOLOGY GROUP, INC.

(Name of small business issuer in its charter)

 

Delaware   81-1004273
(State or other jurisdiction of
incorporation or organization)
  (IRS Employer
Identification Number)

     
1999 S. Bascom Ave. Suite 700. Campbell, CA 95008
(Address of Principal Executive Offices)

 

Issuer’s telephone number: (408) 663-5247

 

Securities registered pursuant to Section 12(b) of the Act:
None
 
Securities registered pursuant to Section 12(g) of the Act:
Common Stock, Par Value $0.0001

 

Indicate by check mark if registrant is a well-known seasoned issuer, as defined under Rule 405 of the Securities Act.  Yes ¨  No x

 

Indicate by check mark if registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act.  Yes ¨  No x

 

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act during the preceding 12 months (or for such shorter period that the issuer was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.   Yes x  No ¨

 

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files). Yes x  No ☐ 

 

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K (§ 229.405 of this chapter) is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.  ¨

 

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and “emerging growth company” in Rule 12b-2 of the Exchange Act.

 

Large accelerated filer ¨ Accelerated filer ¨
Non-accelerated filer x Smaller reporting company x
    Emerging growth company ¨

 

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ¨

 

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act).  Yes ¨  No x

 

As of June 30, 2019, the last business day of the registrant’s most recently completed second fiscal quarter, the aggregate market value of common stock held by non-affiliates of the registrant was $79,434,667.48 based on the closing price of $1.865 as of that date.

 

As of May 14, 2020, there were 81,187,970 shares of the issuer’s common stock, par value $0.0001 per share, issued and outstanding.

 

Documents incorporated by reference: None.

 

 

 

 

 

  

EXPLANATORY NOTE

 

This Annual Report on Form 10-K for the fiscal year ended December 31, 2019 is being filed pursuant to the order of the Securities and Exchange Commission contained in SEC Release No. 34-88465, dated March 25, 2020 (the “Order”). We filed a Form 8-K on March 30, 2020, the original due date of the Form 10-K, indicating our reliance on the relief granted by the Order and the necessity to rely on such relief due to circumstances related to COVID-19 pandemic. In particular, the COVID-19 pandemic has caused severe disruptions in access to our facilities, resulting in limited support from our staff, as well as disruptions in the focus of our management that has dedicated time and resource to mitigating the effects of the pandemic. These effects, in turn, delayed our ability to file this Annual Report on its original due date.

 

 

 

 

TABLE OF CONTENTS

 

        Page
Part I        
Item 1   Business   1
Item 1A   Risk Factors   6
Item 1B   Unresolved Staff Comments   14
Item 2   Properties   14
Item 3   Legal Proceedings   14
Item 4   Mine Safety Disclosures   14
Part II        
Item 5   Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities   15
Item 6   Selected Financial Data   16
Item 7   Management’s Discussion and Analysis of Financial Condition and Results of Operation   16
Item 7A   Quantitative and Qualitative Disclosures About Market Risk   21
Item 8   Financial Statements and Supplementary Data   21
Item 9   Changes in and Disagreements with Accountants on Accounting and Financial Disclosure   21
Item 9A   Controls and Procedures   22
Item 9B   Other Information   22
Part III        
Item 10   Directors, Executive Officers and Corporate Governance   23
Item 11   Executive Compensation   25
Item 12   Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters   26
Item 13   Certain Relationships and Related Transactions, and Director Independence   26
Item 14   Principal Accounting Fees and Services   27
Part IV        
Item 15   Exhibits and Financial Statement Schedules   28
Item 16   Form 10-K Summary   29
Signatures       30

 

i

 

 

In this report, unless the context indicates otherwise, the terms "Company," "we," "us," "our" and similar words refer to KULR Technology Group, Inc. (“KULR”), a Delaware corporation, and its wholly-owned subsidiary, KULR Technology Corporation (“KTC”), a Delaware corporation.

 

SPECIAL NOTE REGARDING FORWARD-LOOKING STATEMENTS

 

This report contains forward-looking statements within the meaning of Section 27A of the Securities Act of 1933, or the "Securities Act," and Section 21E of the Securities Exchange Act of 1934 or the "Exchange Act." These forward-looking statements are subject to certain risks and uncertainties that could cause actual results to differ materially from historical results or anticipated results.

 

In some cases, you can identify forward-looking statements by terms such as "may," "intend," "might," "will," "should," "could," "would," "expect," "believe," "anticipate," "estimate," "predict," "potential," or the negative of these terms. These terms and similar expressions are intended to identify forward-looking statements. The forward-looking statements in this report are based upon management's current expectations and beliefs, which management believes are reasonable. In addition, we cannot assess the impact of each factor on our business or the extent to which any factor or combination of factors, or factors we are aware of, may cause actual results to differ materially from those contained in any forward-looking statements. You are cautioned not to place undue reliance on any forward-looking statements. These statements represent our estimates and assumptions only as of the date of this report. Except to the extent required by federal securities laws, we undertake no obligation to update any forward-looking statement to reflect events or circumstances after the date hereof or to reflect the occurrence of unanticipated events.

 

You should be aware that our actual results could differ materially from those contained in the forward-looking statements due to a number of factors, including:

 

  new competitors are likely to emerge and new technologies may further increase competition;

 

  our operating costs may increase beyond our current expectations and we may be unable to fully implement our current business plan;

 

  our ability to obtain future financing or funds when needed;

 

  our ability to successfully obtain and maintain a diverse customer base;

 

  our ability to protect our intellectual property through patents, trademarks, copyrights and confidentiality agreements;

 

  our ability to attract and retain a qualified employee base;

 

  our ability to respond to new developments in technology and new applications of existing technology before our competitors;

 

  acquisitions, business combinations, strategic partnerships, divestures, and other significant transactions may involve additional uncertainties;

 

  our ability to maintain and execute a successful business strategy; and

 

  regardless of these factors the recent emergence of the COVID-19 virus pandemic has created global restrictions on travel and meetings, temporary but unlimited closure of businesses and business activities, major economic uncertainties leading to unemployment, loss of customers and suppliers, and reluctance of business management to make critical commitments and, instead, conserve cash. At this stage, we are unable to make any reasonable forward-looking statements due to the unprecedented business uncertainty.

 

Other risks and uncertainties include such factors, among others, as market acceptance and market demand for our products and services, pricing, the changing regulatory environment, the effect of our accounting policies, potential seasonality, industry trends, adequacy of our financial resources to execute our business plan, our ability to attract, retain and motivate key technical, marketing and management personnel, and other risks described from time to time in periodic and current reports we file with the United States Securities and Exchange Commission, or the "SEC." You should consider carefully the statements under "Item 1A. Risk Factors" and other sections of this report, which address additional factors that could cause our actual results to differ from those set forth in the forward-looking statements and could materially and adversely affect our business, operating results and financial condition. All subsequent written and oral forward-looking statements attributable to us or persons acting on our behalf are expressly qualified in their entirety by the applicable cautionary statements.

 

ii

 

 

PART I

 

ITEM 1. BUSINESS

 

Overview

 

KULR Technology Group, Inc., through our wholly-owned subsidiary KULR Technology Corporation, develops and commercializes high-performance thermal management technologies for batteries, electronics, and other components across an array of applications. Currently, our main focus is a total solution to battery safety by which we aim to mitigate the effects of thermal runaway propagation. We also target and provide thermal solutions for the following applications: electric vehicles, cloud computing, 5G communication technologies, and energy storage for commercial markets as well as directed energy weapons and high-power missile programs for aerospace and defense. Our proprietary, core technology is a carbon fiber material that provides what we believe to be superior thermal conductivity and heat dissipation for an ultra-lightweight and pliable material. By leveraging our proprietary cooling solutions that have been developed through longstanding partnerships with NASA, the Jet Propulsion Lab and others, our products and services make commercial battery powered products safer and electronics systems cooler and lighter.

 

Battery safety technology is becoming increasingly vital to our world in which battery-operated devices are everywhere. Lithium ion (“Li-ion”) batteries are widely used in consumer electronics, aerospace, marine and automotive applications. In recent months, KULR has developed a total battery safety solution for its customers that spans a wide array of industries and applications. KULR has seen great success in using our patented thermal runaway shield (“TRS”) technology to prevent cell to cell thermal runaway propagation as well as module to module propagation. We have designed a total solution for customers from the design stages incorporating our materials all the way to testing their passive propagation resistant (“PPR”) battery packs. We are flexible and can work with different battery pack configurations across various industries. We developed a PPR reference design for CubeSat battery in December 2019. Our research and testing, as well as working alongside battery experts at NASA Johnson Space Center, has positioned us for further advancements at the forefront of battery safety.

 

Hundreds of millions of Li-ion cells are produced and transported annually and even those packaged to prevent external short can still experience thermal runaway (“TR”) due to internal shorts, caused by latent defects, when fully charged. In these dangerous cases, a torch-like fire is released as energy escapes from the cell and sends nearby cells into TR resulting in a large fire. As part of our total battery safety solution, we have designed a bag out of our TRS material to quench the flames and prevent the TR event. Suitably placed, the TRS provides a means of protection not only from adjacent batteries but also outside fires of arbitrary origin. Experts at NASA’s Propulsion & Power Division found our TRS successful at extinguishing the fire generated by cells when they intentionally triggered the batteries into dangerous failures. Our TRS bag is currently being used on the International Space Station (“ISS”) through a project with Leidos, for storing laptop batteries in order to reduce the risk of TR.

 

Another key element of our battery safety solution is KULR internal short circuit (“ISC”) device and trigger cells which are used for cell testing and screening. Our patented ISC device, licensed from NASA/NREL, can be inserted by OEMs or manufacturers into cells to mimic failure conditions in a cell. Once the trigger device is placed inside the cell, it can be intentionally triggered on demand causing the cell to short circuit. Currently, we provide ISC devices to OEMs and cell manufacturers, as well as ready-made ISC trigger cells to customers to identify failure modes and safety issues within their systems. Currently we are creating an ecosystem based on our technology which can be applied to different battery architectures and chemistries.

 

Our management believes that within commercial markets, aerospace and defense, and high-value applications, cell testing and screening has become a topic of focus. Therefore, we plan to expand our capabilities to include full battery screening and testing as outlined by NASA Johnson Space Center. We plan to fully incorporate this into our holistic approach to battery safety along with our PPR battery pack design and testing services, ISC device and trigger cell products and TRS bags. With increasing regulations and pressure from government bodies to mitigate the dangers of battery fires and TR, we plan to further develop our capabilities in this arena.

 

Our management projects high priority and growth in the aerospace and defense sectors, specifically in regard to directed energy, hypersonic weapon programs, and space missions. Directed energy is currently in the spotlight as experts predict it will greatly impact the future of warfare. Our CRUX cathode generates powerful electron pulses by field emission from the tops of our carbon fiber coating which has the potential to further develop the current technology. Thermal management is another critical component of both hypersonic weapons programs and space missions and is another area in which our products excel. Our carbon fiber velvets are used for thermal management in missile defense programs and are particularly effective because of their survivability at very high temperatures. They are also very effective at transferring heat, and mitigate the risk of overheating in such high-risk environments. Historically we have provided value to this sector and we look forward to further developing our relationships with Airforce Research Lab, Naval Research Lab and prime contractors to market our solutions.

 

1

 

 

In addition to evolving demands led by aerospace and defense, we have observed trending manufacturer-led opportunities in industries such as electric motor vehicles (“EV”) that have become increasingly more reliant on the Cloud, portability and high-demand processing power. KULR’s high performance thermal interface materials can be used to accelerate 5G communications development due to our material’s core properties: high thermal conductivity, light weight, and low contact pressure. 5G is one of the biggest opportunities going forward for transportation technology and we would like to take part in testing of digital and RF tests for 5G. Testing is still in early phases for both digital and RF communication chips, however, we are seeing a big growth opportunity for thermal management for 5G. Cloud computing is also an application of interest since high power communications chips and optical communication modules require cooling.

 

Corporate History

 

KULR was incorporated in the State of Delaware in December 2015 and was formerly known as “KT High-Tech Marketing, Inc.” and, prior to that, as “Grant Hill Acquisition Corporation.” In April 2016, KULR implemented a change of control by issuing shares to new shareholders, redeeming shares of existing shareholders, electing new officers and directors and accepting the resignations of its then existing officers and directors.

 

Our wholly-owned subsidiary, KULR Technology Corp, was formed in 2013 and is based in Santa Clara, California. Since its inception, KTC primarily focused on developing and commercializing its thermal management technologies, which it acquired through assignment from and license with KTC’s co-founder Dr. Timothy Knowles. Prior to 2013, KTC’s technologies were used in numerous advanced space and industrial applications for NASA, Boeing, and Raytheon. A few notable achievements were the use of KTC’s technologies in the X-31 aircraft (battery heat sink), Mercury Messenger (battery heat sink), and X-51 Scramjet (heat exchanger).

 

On June 19, 2017, KULR closed a share exchange with KTC and 100% of the shareholders of KTC (the “KTC Shareholders”) whereby the KTC Shareholders agreed to transfer an aggregate of 25,000,000 shares of KTC’s common stock to KULR in exchange for the issuance of an aggregate of 50,000,000 shares of KULR’s common stock to the KTC Shareholders (the “Share Exchange”), resulting in KTC becoming a wholly-owned subsidiary of KULR and KTC’s business of developing and commercializing its thermal management technologies becoming KULR’s main operation.

 

The Share Exchange was accounted for as a reverse recapitalization in accordance with generally accepted accounting principles in the United States of America, with KTC being treated as the acquiring company for accounting purposes. Accordingly, the financial statements included in this Annual Report reflect the assets, liabilities and historical results of KTC prior to the completion of the Share Exchange.

 

On August 30, 2018, KULR changed its name from “KT High-Tech Marketing, Inc.” to “KULR Technology Group, Inc.” by filing a certificate of amendment to its Certificate of Incorporation with the office of the Secretary of State of the State of Delaware.

 

On December 4, 2018, KULR filed a definitive Information Statement on Form 14C (the “December Information Statement”), giving notice to KULR’s shareholders that on November 5, 2018, KUTG executed a written consent in lieu of shareholder meeting authorizing KULR to: (i) amend KULR’s Articles of Incorporation to increase the number of authorized shares of common stock from 100,000,000 shares of common stock to 500,000,000 shares of common stock; (ii) adopt and ratify the KULR Technology Group 2018 Equity Incentive Plan and (iii) ratify the authorization of the issuance of 1,000,000 shares (the “Voting Preferred Shares”) of Series A Voting Preferred Stock to Michael Mo, KULR’s Chief Executive Officer. On December 28, 2018, twenty (20) days after the mailing date of the December Information Statement, KUTG was deemed authorized by ratifying vote of its majority shareholders and the authorization granted by its Board of Directors to issue the Voting Preferred Shares, which KULR has not but expects to do in the near future. On December 31, 2018, KULR filed a certificate of amendment with the Secretary of State of the State of Delaware, to increase the number of authorized shares of its common stock from 100,000,000 to 500,000,000. As a result, the aggregate number of the Company’s authorized capital stock became 520,000,000 shares.

 

Recent Developments

 

COVID-19

 

In January 2020, an outbreak of a new strain of coronavirus, COVID-19, was identified in Wuhan, China. Through the first quarter of 2020, the disease became widespread around the world, and on March 11, 2020, the World Health Organization declared a pandemic. Our business is dependent on developing new markets and new products to be used on a global basis, thus restrictions on travel could lead to reduced demand for our products and interruptions to supply chains. Also, the local regulations such as “Shelter in Place” will affect our ability to maintain regular R&D and manufacturing schedules as well as the capability to meet customer demands timely. Given the uncertainty around the extent and timing of the potential future spread or mitigation of the Coronavirus and around the imposition or relaxation of protective measures, we cannot reasonably estimate the impact to our future results of operations, cash flows, or financial condition.

 

Decontamination Solutions

 

In response to the unprecedented demand for solutions to combat the spread of COVID-19 (and other viruses) and in response to an opportunity that arose in connection with our ongoing customer engagements and strategic relationships, we recently explored the launch of a suite of commercial and consumer products that utilize a Hypochlorous-Acid based microbial decontamination liquid.  Although no assurance can be made that we will be able to commercialize these decontamination products or that there will be demand for such products, we believe that we are capable of producing or acquiring substantial quantities of the decontamination liquid to deploy in a suite of decontamination delivery products and technology that we are actively developing.  In order to advance these efforts and to test the efficacy of the decontamination liquid, we engaged an independent lab to test our solution but we do not yet have any lab results. 

 

PPR Product License and Supply Agreement - Americase’s Battery Bag

 

On April 13, 2020, we announced that it entered into a license and supply agreement with Americase, LLC, granting a license for Americase’s use of our passive propagation resistant (PPR) technology and agreeing to supply our PPR materials for Americase’s “Battery Bag” products.

 

Market Opportunity and Strategy

 

Market

 

The world of electronics continues to become more and more demanding and performance driven. The increasing demand for reliability of microelectronics and lithium-ion batteries has pushed thermal management to the forefront of many industries. We target our solutions to serve the following markets and applications: PPR battery design, Battery Storage and Transportation, Electrical Transportation, 5G Mobile and Cloud Computing Infrastructure, Aerospace and Defense.

 

2

 

 

Lithium-Ion Battery, Energy Storage and Battery Transportation Market. According to Prescient & Strategic Intelligence, Lithium-Ion battery market was valued at $34 billion in 2018, the global lithium-ion battery market is projected to surpass $106 billion by 2024, witnessing a CAGR of 21.8% between 2019 and 2024. The stationary battery storage market is slated to ramp from $11 billion in 2018 to $170 billion by 2030, according to a 2019 Global Market Insights, Inc. report. Favorable regulatory policies pertaining to sustainable energy technologies coupled with upsurge in investments toward large scale storage units with increased power output will drive the market size.

 

According to Market Research Future, the global thermal management market is expected to reach approximately $15 billion by end of 2023 with 7% compound annual growth rate during the forecast period from 2017 to 2023. According to the report, in recent years, electronic devices and systems have undergone tremendous technological growth. Advancements in the electronics industry have led to an increased need for innovative thermal management technologies, which serve to improve performance and reliability. The report states that technological progress has come on two fronts: increased functionality on a single device unit and miniaturization of each unit. As a result, there has been an increased demand for thermal management technologies. The report analyzes the thermal market by four segments, including hardware, software, interfaces, and substrates.

 

Electrical Transportation Market. According to Frost & Sullivan’s recently released “Global Electric Vehicle Market Outlook 2018,” global EV sales will climb from 1.2 million units in 2017 to approximately 2 million units in 2019. The EV industry will need to overcome major challenges related to battery technology and charging infrastructure, both of which have fallen far short of the pace set by global EV sales. The charging infrastructure market, which includes batteries and battery technology, according to an AT Kearney report, will be a $29 billion global market by 2020 within the overall $390 billion global E-Mobility market.

 

5G Mobile Computing Market. The next generation mobile computing platform, also known as the “5G” mobile wireless standard, presents new challenges and demands to improve the performance and reliability of mobile infrastructures and consumer devices. According to the IHS Markit’s global study, in 2035, when 5G’s full economic benefit should be realized across the globe, a broad range of industries – from retail to education, transportation to entertainment, and everything in between – could produce up to $12.3 trillion worth of goods and services enabled by 5G.

 

Cloud Computing Market. Market analysts at Gartner, Inc. project the cloud computing market to be $227 billion in 2019, up from $146 billion in 2017 with sustained growth at 22% annually. Forrester also predicts that more than 50% of global enterprises will rely on at least one public cloud platform. A key area of cloud computing is optical data transfer and communications connections and lines. Optical data is faster and more efficient and, as cloud computing banks move to acquire and utilize optical data, thermal management will play a pivotal role in maintaining the peak performance and safety of these expensive and highly sensitive computer connections. The processing demands of artificial intelligence (“AI”) technology in the cloud requires advanced thermal management solutions for processors and memory modules.

 

Space Exploration and Communications Market. According to BIS Research, the Space Industry, is valued at $380 billion in 2019, and is projected grow at a CAGR of 5.6%, to a value of $558 billion by 2026. Demand for nano-satellites and re-usable launch vehicle systems is anticipated to be driven by the massive investment made by governments and private enterprises. The overall trend in space investment is stable financially but explosive numerically, providing vastly more opportunity for space technology providers. Increasingly, investments in space exploration and commercialization are being led by well-funded private companies with most focused-on satellite development and deployment. KULR’s heritage in space thermal management technology positions us well in this market.

 

 We believe KULR’s technology solution excels in a number of categories important in the world of thermal management. KULR’s proprietary carbon fiber-based solutions are generally more thermally conductive, lighter weight, require less contact pressure, and offer greater design flexibility and durability compared to traditional solutions. As a result, we believe KULR has real potential to offer a unique value proposition to customers in the multibillion-dollar thermal management industry. KULR aims to provide cost-effective, superior thermal management solutions for a group of electronic manufacturers.

 

Sales and Marketing Strategy

 

The Company markets and sells products and solutions directly to customers. We believe that our direct relationship with end customers allows us to have more in-depth technical interactions with our customers and faster turnaround time. We market to our customers through our website, industry conferences, and industry market research reports. In 2020, we plan to expand our sales network by working with sales agents and distributors for more mature and off-the-shelf products such as FTI and Cathode product. For PPR design service, we will continue to work with customers directly.

 

3

 

 

Advertising and Communications Strategy

 

We plan to utilize all forms of advertising and communications tools at our disposal. This includes commissioning unbiased white papers and technical papers, attending, sponsoring, and guest speaking at industry events, conferences, and symposiums. We have hired a public relations consultant who will oversee our press releases and media relations interface with newspapers, magazines, and blogs. We have also hired a SEO specialist for social media outreach activities and will also rely on the company’s pedigree within the thermal management community to spread high praise via word of mouth. To date, as a result of these efforts, we have been mentioned in WSJ, Cheddar TV, CNBC, Forbes, EETimes, USA Today, Business Insider and others.

 

Intellectual Property and Patent Strategy

 

Our intellectual property strategy includes pursuing patent protection for new innovations in core carbon fiber architecture development, application development, acquisition of intellectual property, and licensing of third-party patents and intellectual property. As of May 14, 2020, we have eight pending nonprovisional and provisional patent applications and we have four patents granted and assigned to KULR. We also have an exclusive license to four third party patents. 

 

Product and Services

 

Our heat management products and services can be divided into the following categories, subcategories and functionalities:

 

Lithium Ion (“L-ion”) Battery Thermal Runaway Shield (“TRS”): KULR has developed a thermal insulation technology aimed at passive resistance to thermal runaway propagation in L-ion batteries in partnership with National Aeronautics and Space Administration Johnson Space Center (“NASA JSC”). HYDRA TRS acts as a heat sink during normal lithium-ion battery pack operation but also prevents thermal runaway propagation, which is a serious concern for aerospace and defense customers and electric vehicle manufacturers. The HYDRA is a vaporizing thermal capacitor that provides passive prevention of thermal runaway propagation (“TRP”) in lithium-ion battery packs. Thermal runaway can occur spontaneously in a Li-ion cell due to a short. This can trigger an explosive release of electric energy that ruptures the end cap resulting in a flare and combustion of cell materials. Released heat drives the triggered cell temperatures to > 500°C, causing a dramatic increase in neighboring cell temperatures. Temperatures above the critical 130°C greatly increases the chance for a short in adjacent cells and result in TRP. TRS keeps neighboring cell temperatures from rising above 100°C (well below the 130°C threshold) and prevents TRP.

 

Fiber Thermal Interface Material (“FTI”): KULR thermal interface materials (“TIMs”) consist of vertically oriented carbon fiber velvets attached to a film of polymer or metal. The fiber packing density and orientation are selected to serve a wide range of applications, including hostile thermal and chemical environments, sliding interfaces, and interfaces with widely varying gaps. They can be coated for electrical isolation. They require low contact pressure and provide high thermal conductivity. Their light weight and high compliance make them uniquely suited for aerospace, industrial and high-performance commercial devices.

 

Phase Change Material (“PCM”) Heat Sink: KULR PCM composite heat sinks consisting of a conductive carbon fiber velvet embedded with a suitable alkane (“paraffin”) having high latent heat at its melting point. Such heat sinks offer passive thermal control for instruments that would otherwise overheat or under-cool during periodic operations. A typical application involves lasers that dissipate heat but need tight thermal control where active cooling is unavailable.

 

HYDRA TRS Battery Storage Bag: KULR developed HYDRA TRS Bag to safely store and transport lithium-ion batteries in partnership with NASA Johnson Space Center for the International Space Stations. Between January and June 2019 experts with NASA’s Propulsion & Power Division tested storage and use of rechargeable lithium ion laptop batteries. The tests intentionally triggered the batteries into dangerous failures in order to study what storage methods may stop battery fires from spreading battery to battery in thermal runaway propagation. As a result, KULR TRS bags are currently in service on the International Space Station for storage of spare laptop batteries, having flown November 2, 2019 on the CRS2 NG-12 resupply mission. KULR is developing a commercial version for mass market applications.

 

Internal Short Circuit (“ISC”) Device: In March 2018, KULR reached an agreement with the National Renewable Energy Laboratory (“NREL”), a national laboratory of the U.S. Department of Energy, to be the exclusive manufacturing and distribution partner for the patented ISC device, which causes predictable battery cell failures in Li-ion batteries, making them easier to study and, therefore, safer. Li-ion batteries are the industry and consumer standard for portable power; billions of individual battery cells exist and billions more are planned for production. They provide power for everything from smart phones and laptops to electric cars and space crafts. But Li-ion batteries fail, sometimes with catastrophic results. Due to the relative rarity of cell failures, scientists and researchers had been unable to reliably or accurately replicate latent defect cell failures in lab settings, impeding research into safer battery technology. In 2019, KULR has produced and sold both ISC devices and ISC trigger cells to customers.

 

CRUX Cathode: The CRUX Cathode is composed of a carbon fiber velvet, providing a means of generating powerful electron pulses by field emission from the tops of the carbon fibers. CRUX Cathodes can be customized for different applications including the generation of microwaves, x-rays, and laser radiation. They can be fabricated in a wide variety of physical configurations, ranging from simple planar and cylindrical forms to more complex lobed shapes.

 

4

 

 

Competition

 

Currently, the battery industry uses a number of solutions to mitigate thermal runaway propagation that are offered by Unifrax, Lydall, LHS, 3M, Engineered Syntactic Systems, Celono, AllCell and others. Each of their solutions offer unique features and benefits for a specific application. We do not believe, however, that there is a one-size-fits-all solution across all applications. We believe our PPR design solution offers competitive light-weight and effective solutions for high energy battery cells because it is more flexible and can fit into different design configurations. For applications that require passive, light-weight solutions for high energy density battery cells, TRS offers a competitive solution.

 

Thermal interface material is a large and fragmented market with many large suppliers including: Henkel Bergquist, Fujipoly, Laird, 3M, Honeywell and others. These solutions are typically based on silicone and thermal particles. KULR’s FTI offers high bulk thermal conductivity and low contact pressure requirements, which we believe gives us a competitive advantage over other thermal interface solutions.

 

Our licensed ISC device offers a reliable way to trigger battery cell thermal runaway compared to nail penetration, over-charging or over-heating the cell. ISC does not rely on mechanically damaging the battery exterior to activate the short, as do most of the other evaluation methodologies. Instead, the ISC devices trigger true internal shorts. This makes it possible to accurately pinpoint and fix problems leading to malfunctions, an ability that we believe will give us a competitive advantage over other testing solutions.

 

Governmental Regulation and Environmental Compliance

 

Certain substances we use in our manufacturing process are subject to federal governmental regulations (such as Environmental Protect Agency regulations). We believe we are in material compliance with all applicable governmental regulations, and that the cost and effect of compliance with environmental laws is not material. As a small generator of hazardous substances, we are subject to local governmental regulations relating to the storage, discharge, handling, emission, generation, manufacture and disposal of toxic or other hazardous substances, such as acetone that is used in very small quantities to manufacture our products. We are currently in compliance with these regulations. Most new materials sold in the U.S or in many other countries require regulation by government authorities. In most other countries, there are no specific regulations that require additional regulation, but some countries do have registration requirements with which we comply to the best our ability.

 

Employees

 

As of May 14, 2020, we had 11 employees and 2 consultants. We believe that we maintain a good working relationship with our employees and we have not experienced any significant labor disputes.

 

Intellectual Property

 

We seek to establish and maintain our proprietary rights in our technology and products through the use of patents, copyright, trademarks and trade secrets. We have, and will continue to, file applications for and/or obtain patents, copyrights and trademarks in the United States and selected foreign countries where we believe filing for such protection is appropriate. We also seek to maintain our trade secrets and confidential information by implementing organizational nondisclosure policies and through the use of appropriate confidentiality agreements. As of May 14, 2020, we held four U.S. patents and eight non-provisional pending U.S. patent applications with expiration dates ranging from 2022 to 2035. In addition, KULR has exclusive license on four patents from its partnerships. There can be no assurance, however, that the rights obtained can be successfully enforced against infringing products in every jurisdiction. While our patents, copyrights, trademarks, and trade secrets provide some advantage and protection, we believe our competitive position and future success is largely determined by such factors as the system and application knowledge, innovative skills, technological expertise and management ability and experience of our personnel; the range and success of new products being developed by us; our market brand recognition and ongoing marketing efforts; and customer service and technical support. We also have trademarks that are used in the conduct of our business to distinguish genuine KULR products; KULR has been granted trademarks for Class 9 and Class 17 applications.

 

On April 15, 2013, KULR entered into a license and development agreement (the “ESLI License Agreement”) with Energy Science Laboratories, Inc. (“ESLI”) pursuant to which ESLI received a significant ownership stake in KULR, and in exchange ESLI granted to KULR and its affiliates an irrevocable, exclusive, world-wide license to ESLI’s Thermal Management Technologies and Thermal Intellectual Property (as such terms are defined in the ESLI License Agreement). Subsequently, on November 16, 2016, KULR and ESLI entered into a patent assignment agreement (the “ESLI Patent Assignment”) pursuant to which ESLI assigned to KULR certain patents and patent applications owned by ESLI.

 

5

 

 

ITEM 1A. RISK

 

An investment in the Company’s common stock involves a high degree of risk. In determining whether to purchase the Company’s common stock, an investor should carefully consider all of the material risks described below, together with the other information contained in this report before deciding to purchase the Company’s securities. An investor should only purchase the Company’s securities if he or she can afford to suffer the loss of his or her entire investment.

 

Risks Related to Our Business and Our Industry

 

We are a young company with a limited operating history, making it difficult for you to evaluate our business and your investment.

 

KULR was formed in 2015 and KTC was formed in 2013. The Company, as a whole, has limited operating history. We have not yet demonstrated sales of products at a level capable of covering our fixed expenses. Since inception, we have not demonstrated the capability to produce sufficient materials to generate the ongoing revenues necessary to sustain our operations in the long-term. Nor have we demonstrated the ability to generate sufficient sales to sustain the business. There can be no assurance that the Company will ever produce a profit.

 

Many of the Company’s products represent new products that have not yet been fully tested in commercial product settings and for which manufacturing operations have not yet been fully scaled. This means that investors are subject to all the risks incident to the creation and development of multiple new products and their associated manufacturing processes, and each investor should be prepared to withstand a complete loss of their investment.

 

Because we are subject to these uncertainties, there may be risks that management has failed to anticipate and you may have a difficult time evaluating our business and your investment in our Company. Our ability to become profitable depends primarily on our ability to successfully commercialize our products in the future. Even if we successfully develop and market our products, we may not generate sufficient or sustainable revenue to achieve or sustain profitability, which could cause us to cease operations.

 

We have no sustainable base of products approved for commercial use by our customers, have never generated significant product revenues and may never achieve sufficient revenues for profitable operations, which could cause us to cease operations.

 

KULR primarily sells bulk materials or products made with these materials to other companies for incorporation into their products. Although KULR’s technologies were previously used in numerous advanced space and industrial applications for NASA, there has been no significant incorporation of our materials or products into customer products that are released for commercial sale as of the date of this report. Because there is no demonstrated history of large-scale commercial success for our products, it is possible that such commercial success may never happen and that we will never achieve the level of revenues necessary to sustain our business.

 

There is substantial doubt about our ability to continue as a going concern.

 

As of December 31, 2019, we had a working capital deficit and accumulated deficit of $824,481 and $8,396,312, respectively. During the year ended December 31, 2019, we had a net loss and used cash in operations of $1,979,753 and $1,188,339, respectively. We have historically incurred operating losses and may continue to incur operating losses for the foreseeable future. We believe that these conditions raise substantial doubt about our ability to continue as a going concern. This may hinder our future ability to obtain financing or may force us to obtain financing on less favorable terms than would otherwise be available. Although we have generated revenues from the sale of our products, we have only recently begun to market and sell our products and solutions. If we are unable to develop sufficient revenues and additional customers for our products and services, we will not generate enough revenue to sustain our business, and we may fail. There can be no assurance that we will be able to continue as a going concern.

 

6

 

 

We will need to raise substantial additional capital in the future to fund our operations and we may be unable to raise such funds when needed and on acceptable terms, which could have a materially adverse effect on our business.

 

We anticipate that we will incur operating losses for the foreseeable future. We may require additional funds for our anticipated operations and if we are not successful in securing additional financing, we may be required to delay significantly, reduce the scope of or eliminate one or more of our research or development programs, downsize our general and administrative infrastructure, or seek alternative measures to avoid insolvency, including arrangements with collaborative partners or others that may require us to relinquish rights to certain of our technologies, product candidates or products.

 

We have limited experience in higher volume manufacturing that will be required to support profitable operations, and the risks associated with scaling to larger production quantities may be substantial.

 

We have limited experience manufacturing our products. We have established small-scale commercial or pilot-scale production facilities for our carbon-based thermal management products, but these facilities do not have the existing production capacity to produce sufficient quantities of materials for us to reach sustainable sales levels. In order to develop the capacity to produce much higher volumes, it will be necessary to produce multiples of existing processes or engineer new production processes in some cases. There is no guarantee that we will be able to economically scale-up our production processes to the levels required. If we are unable to scale-up our production processes and facilities to support sustainable sales levels, the Company may be forced to curtail or cease operations.

 

We have a long and complex sales cycle and have not demonstrated the ability to operate successfully in this environment.

 

It has been our experience since our inception that the average sales cycle for our products can range from one to five years from the time a customer begins testing our products until the time that they could be successfully used in a commercial product. We have only demonstrated a limited track record of success in completing customer development projects, which makes it difficult for you to evaluate the likelihood of our future success. The sales and development cycle for our products is subject to customer budgetary constraints, internal acceptance procedures, competitive product assessments, scientific and development resource allocations, and other factors beyond our control. If we are not able to successfully accommodate these factors to enable customer development success, we will be unable to achieve sufficient sales to reach profitability. In this case, the Company may not be able to raise additional funds and may be forced to curtail or cease operations and you could lose all or a significant part of your investment.

 

We are dependent on customers and partners to design and test our solution into new applications which may not be brought to market successfully.

 

The Company targets its thermal management solution for new applications and devices that require high performance and unique features offered by its products. Developing new applications and devices involves a lengthy and complex process, and they may not be commercialized on a timely basis, or at all. The Company’s success is directly related to the success of these new products. Furthermore, because the Company’s solutions are relatively new to mass market consumer electronics, the design and testing time is longer than traditional solutions. Moreover, in transitioning to new technologies and products, we may not achieve design wins, our customers may delay transition to these new technologies, our competitors may transition more quickly than we do, or we may experience product delays, cost overruns or performance issues that could harm our operating results and financial condition.

 

We could be adversely affected by our exposure to customer concentration risk.

 

We are subject to customer concentration risk as a result of our reliance on a relatively small number of customers for a significant portion of our revenues. For 2019, we had 3 customers whose purchases accounted for 69% of total product revenues. Due to the nature of our business and the relatively large size of many of the applications our customers are developing, we anticipate that we will be dependent on a relatively small number of customers for the majority of our revenues for the next several years. It is possible that only one or two customers could place orders sufficient to utilize most or all of our existing manufacturing capacity.

 

In this case, there would be at risk of significant loss of future revenues if one or more of these customers were to stop ordering our materials, which could in turn have a material adverse effect on our business and on your investment.

 

We operate in an advanced technology arena where hypothesized properties and benefits of our products may not be achieved in practice, or in which technological change may alter the attractiveness of our products.

 

Because there is no sustained history of successful use of our products in commercial applications, there is no assurance that broad successful commercial applications may be technically feasible. Some of the scientific and engineering data related to our products has been generated in our own laboratories or in laboratory environments at our customers or third-parties. It is well known that laboratory data is not always representative of commercial applications.

 

Likewise, we operate in a market that is subject to rapid technological change. Part of our business strategy is to monitor such change and take steps to remain technologically current, but there is no assurance that such strategy will be successful. If the Company is not able to adapt to new advances in materials sciences, or if unforeseen technologies or materials emerge that are not compatible with our products and services or that could replace our products and services, our revenues and business prospects would likely be adversely affected. Such an occurrence may have severe consequences, including the potential for our investors to lose all of their investment.

 

7

 

 

Competitors that are larger and better funded may cause the Company to be unsuccessful in selling its products.

 

The Company operates in a market that is expected to have significant competition in the future. Global research is being conducted by substantially larger companies who have greater financial, personnel, technical, and marketing resources. There can be no assurance that the Company’s strategy of offering better thermal management solutions based on the Company’s proprietary carbon fiber-based products will be able to compete with other companies, many of whom will have significantly greater resources, on a continuing basis. In the event that we cannot compete successfully, the Company may be forced to cease operations.

 

Because of our small size and limited operating history, we are dependent on key employees.

 

The Company’s operations and development are dependent upon the experience and knowledge of Michael Mo, our Chief Executive Officer, Simon Westbrook our Chief Financial Officer, Dr. Timothy Knowles, our Chief Technical Officer and Michael Carpenter, our Vice President of Engineering. If the services of any of these individuals should become unavailable, the Company’s business operations might be adversely affected. If several of these individuals became unavailable at the same time, the ability of the Company to continue normal business operations might be adversely affected to the extent that revenue or profits could be diminished, and you could lose all or a significant amount of your investment.

 

Our success depends in part on our ability to protect our intellectual property rights, and our inability to enforce these rights could have a material adverse effect on our competitive position.

 

We rely on the patent, trademark, copyright and trade-secret laws of the United States and to protect our intellectual property rights. We may be unable to prevent third parties from using our intellectual property without our authorization. The unauthorized use of our intellectual property could reduce any competitive advantage we have developed, reduce our market share or otherwise harm our business. In the event of unauthorized use of our intellectual property, litigation to protect or enforce our rights could be costly, and we may not prevail.

 

Many of our technologies are not covered by any patent or patent application, and our issued and pending U.S. patents may not provide us with any competitive advantage and could be challenged by third parties. Our inability to secure issuance of our pending patent applications may limit our ability to protect the intellectual property rights these pending patent applications were intended to cover. Our competitors may attempt to design around our patents to avoid liability for infringement and, if successful, our competitors could adversely affect our market share. Furthermore, the expiration of our patents may lead to increased competition.

 

Our pending trademark applications may not be approved by the responsible governmental authorities and, even if these trademark applications are granted, third parties may seek to oppose or otherwise challenge these trademark applications. A failure to obtain trademark registrations in the United States and in other countries could limit our ability to protect our products and their associated trademarks and impede our marketing efforts in those jurisdictions.

 

In addition, effective patent, trademark, copyright and trade secret protection may be unavailable or limited in some foreign countries. We also rely on unpatented proprietary manufacturing expertise, continuing technological innovation and other trade secrets to develop and maintain our competitive position. Although we generally enter into confidentiality agreements with our employees and third parties to protect our intellectual property, these confidentiality agreements are limited in duration and could be breached, and may not provide meaningful protection of our trade secrets or proprietary manufacturing expertise. Adequate remedies may not be available if there is an unauthorized use or disclosure of our trade secrets and manufacturing expertise. In addition, others may obtain knowledge about our trade secrets through independent development or by legal means. The failure to protect our processes, apparatus, technology, trade secrets and proprietary manufacturing expertise, methods and compounds could have a material adverse effect on our business by jeopardizing critical intellectual property.

   

Where a product formulation or process is kept as a trade secret, third parties may independently develop or invent and patent products or processes identical to our trade-secret products or processes. This could have an adverse impact on our ability to make and sell products or use such processes and could potentially result in costly litigation in which we might not prevail.

 

We could face intellectual property infringement claims that could result in significant legal costs and damages and impede our ability to produce key products, which could have a material adverse effect on our business, financial condition and results of operations.

 

8

 

 

If our technologies conflict with the proprietary rights of others, we may incur substantial costs as a result of litigation or other proceedings and we could face substantial monetary damages and be precluded from commercializing our products, which would materially harm our business and financial condition.

 

Patents in the thermal management solutions industry are numerous and may, at times, conflict with one another. As a result, it is not always clear to industry participants, including us, which patents cover the multitude of product types. Ultimately, the courts must determine the scope of coverage afforded by a patent and the courts do not always arrive at uniform conclusions.

 

A patent owner may claim that we are making, using, selling or offering for sale an invention covered by the owner’s patents and may go to court to stop us from engaging in such activities. Such litigation is not uncommon in our industry. Patent lawsuits can be expensive and would consume time and other resources. There is a risk that a court would decide that we are infringing a third party’s patents and would order us to stop the activities covered by the patents, including the commercialization of our products. In addition, there is a risk that we would have to pay the other party damages for having violated the other party’s patents (which damages may be increased, as well as attorneys’ fees ordered paid, if infringement is found to be willful), or that we will be required to obtain a license from the other party in order to continue to commercialize the affected products, or to design our products in a manner that does not infringe a valid patent. We may not prevail in any legal action, and a required license under the patent may not be available on acceptable terms or at all, requiring cessation of activities that were found to infringe a valid patent. We also may not be able to develop a non-infringing product design on commercially reasonable terms, or at all.

 

We may not obtain U.S. Government contracts to further develop our technology.

 

We can give no assurances that we will be successful in obtaining government contracts. The process of applying for government contracts is lengthy, and we cannot be certain that we will be successful in complying with all requirements throughout such application process. Accordingly, we cannot be certain that we will be awarded any U.S. Government contracts utilizing our carbon fiber-based solutions.

 

Downturns in general economic conditions could adversely affect our profitability.

 

Downturns in general economic conditions can cause fluctuations in demand for our products, product prices, volumes and gross margins. Future economic conditions may not be favorable to our industry. A decline in the demand for our products or a shift to lower-margin products due to deteriorating economic conditions could adversely affect sales of our products and our profitability and could also result in impairments of certain of our assets.

 

Furthermore, any uncertainty in economic conditions may result in a slowdown to the global economy that could affect our business by reducing the prices that our customers may be able or willing to pay for our products or by reducing the demand for our products.

 

An increase in the cost of raw materials or electricity might affect our profits.

 

Any increase in the prices of our raw materials or energy might affect the overall cost of our products. If we are not able to raise our prices to pass on increased costs to our customers, we would be unable to maintain our existing profit margins. Our major cost components include items such as production materials and electricity, which items are normally readily available industrial commodities. During our history as a business, we have not seen any material impact (as defined by GAAP) on our cost structure from fluctuations in raw material or energy costs, but this could change in the future.

 

Our results of operations could deteriorate if our manufacturing operations were substantially disrupted for an extended period.

 

Our manufacturing operations may be subject to disruption due to extreme weather conditions, floods and similar events, major industrial accidents, strikes and lockouts, adoption of new laws or regulations, changes in interpretations of existing laws or regulations or changes in governmental enforcement policies, civil disruption, riots, terrorist attacks, war, and other events. We cannot assure you that no such events will occur. If such an event occurs, it could have a material adverse effect on us.

 

9

 

 

We may become subject to liabilities related to risks inherent in working with hazardous materials.

 

Our development and manufacturing processes involve the controlled use of hazardous materials, such as acetone. We are subject to federal, provincial and local laws and EPA regulations governing the use, manufacture, storage, handling and disposal of such materials and certain waste products. Although we believe that our safety procedures for handling and disposing of such materials comply with the standards prescribed by such laws and regulations, the risk of accidental contamination or injury from these materials cannot be completely eliminated. In the event of such an accident, we could be held liable for any damages that result and any such liability could exceed our resources. We are not specifically insured with respect to this liability. Although we believe that we are in compliance in all material respects with applicable environmental laws and regulations and currently do not expect to make material capital expenditures for environmental control facilities in the near-term, if we fail to comply with these regulations substantial fines could be imposed on us and we could be required to suspend production, alter manufacturing processes or cease operations. In addition, there can be no assurance that we will not be required to incur significant costs to comply with environmental laws and regulations in the future, or that our operations, business or assets will not be materially adversely affected by current or future environmental laws or regulations.

 

Future adverse regulations could affect the viability of the business.

 

As a small generator of hazardous substances, we are subject to local governmental regulations relating to the storage, discharge, handling, emission, generation, manufacture and disposal of toxic or other hazardous substances, such as acetone that is used in very small quantities to manufacture our products. We are currently in compliance with these regulations. However, there can be no assurance that future regulations might not change or raise the compliance standards, of which the Company may become in violate or for which we may incur substantial costs to comply.

 

In most cases, as far as we are aware, there are no current regulations elsewhere in the world that prevent or prohibit the sale of the Company’s products. However, there is no assurance that any regulations will not be enacted in the future to require the Company’s products or production materials to be subject to test for toxicity or other health effects before they can be sold or used in the production process, if such regulations are enacted in the future, the Company’s business could be adversely affected because of the requirement for expensive and time-consuming tests or other regulatory compliance. There can be no assurance that future regulations might not severely limit or even prevent the sale of the Company’s products in major markets, in which case the Company’s financial prospects might be severely limited, causing investors to lose some or all of their investment.

 

Our directors and officers may be exposed to liability.

 

We currently maintain a policy for director and officer liability insurance, also known as “D&O Insurance.” However, the maximum coverage under our D&O Insurance policy may not be sufficient to cover all such liability exposure and, as a result, it may be more difficult for us to attract and retain qualified persons to serve on our board of directors or as executive officers.  

 

Compliance with changing regulation of corporate governance and public disclosure will result in additional expenses and will divert time and attention away from revenue generating activities.

 

Changing laws, regulations and standards relating to corporate governance and public disclosure, including the Sarbanes-Oxley Act of 2002 and related SEC regulations, have created uncertainty for public companies and significantly increased the costs and risks associated with accessing the public markets and public reporting. Our management team will need to invest significant management time and financial resources to comply with both existing and evolving standards for public companies, which will lead to increased selling, general and administrative expenses and a diversion of management time and attention from revenue generating activities to compliance activities, which could have an adverse effect on our business.

 

If we fail to maintain effective internal controls over financial reporting, the price of our common stock may be adversely affected.

 

In the past, our management identified weaknesses in our internal controls and although our management believes such weaknesses have been remediated, our internal control over financial reporting may still or could in the future have weaknesses and conditions that could require correction or remediation, the disclosure of which may have an adverse impact on the price of our common stock. We are required to establish and maintain appropriate internal controls over financial reporting. Failure to establish those controls, or any failure of those controls once established, could adversely affect our public disclosures regarding our business, prospects, financial condition or results of operations. In addition, management’s assessment of internal controls over financial reporting may identify weaknesses and conditions that need to be addressed in our internal controls over financial reporting or other matters that may raise concerns for investors. Any actual or perceived weaknesses and conditions that need to be addressed in our internal control over financial reporting or disclosure of management’s assessment of our internal controls over financial reporting may have an adverse impact on the price of our common stock.

 

10

 

 

We are required to comply with certain provisions of Section 404 of the Sarbanes-Oxley Act of 2002 and if we fail to comply in a timely manner, our business could be harmed and our stock price could decline.

 

Rules adopted by the SEC pursuant to Section 404 of the Sarbanes-Oxley Act of 2002 require an annual assessment of internal controls over financial reporting, and for certain issuers an attestation of this assessment by the issuer’s independent registered public accounting firm. The standards that must be met for management to assess the internal controls over financial reporting as effective are evolving and complex, and require significant documentation, testing, and possible remediation to meet the detailed standards. We expect to incur significant expenses and to devote resources to Section 404 compliance on an ongoing basis. It is difficult for us to predict how long it will take or how costly it will be to complete the assessment of the effectiveness of our internal control over financial reporting for each year and to remediate any deficiencies in our internal control over financial reporting. As a result, we may not be able to complete the assessment and remediation process on a timely basis. In addition, although attestation requirements by our independent registered public accounting firm are not presently applicable to us, we could become subject to these requirements in the future and we may encounter problems or delays in completing the implementation of any resulting changes to internal controls over financial reporting. In the event that our Chief Executive Officer or Chief Financial Officer determine that our internal control over financial reporting is not effective as defined under Section 404, we cannot predict how regulators will react or how the market prices of our shares will be affected; however, we believe that there is a risk that investor confidence and share value may be negatively affected.

 

Risks Relating to Our Common Stock

 

The price of our common stock is volatile and fluctuations in our operating results and announcements and developments concerning our business affect our stock price, which may cause investment losses for our stockholders.

 

The market for our common stock is highly volatile and the trading price of our stock quoted on the OTCQB is subject to wide fluctuations in response to, among other things, operating results, the number of stockholders desiring to sell their shares, changes in general economic conditions and the financial markets, the execution of new contracts and the completion of existing agreements and other developments affecting us. In addition, statements or changes in opinions, ratings, or earnings estimates made by brokerage firms or industry analysts relating to our market or relating to us could result in an immediate and adverse effect on the market price of our common stock. The highly volatile nature of our stock price may cause investment losses for our shareholders. In the past, securities class action litigation has been brought against companies following periods of volatility in the market price of their securities. If securities class action litigation is brought against us, such litigation could result in substantial costs while diverting management’s attention and resources.

 

Our common stock is subject to the "Penny Stock" rules of the SEC and the trading market in our securities is limited, which makes transactions in our stock cumbersome and may reduce the value of an investment in our stock.

 

The Securities and Exchange Commission has adopted Rule 15g-9 which establishes the definition of a "penny stock," for the purposes relevant to us, as any equity security that has a market price of less than $5.00 per share or with an exercise price of less than $5.00 per share, subject to certain exceptions. For any transaction involving a penny stock, unless exempt, the rules require:

 

  · That a broker or dealer approve a person's account for transactions in penny stocks; and

 

  · The broker or dealer receives from the investor a written agreement to the transaction, setting forth the identity and quantity of the penny stock to be purchased.

 

  In order to approve a person's account for transactions in penny stocks, the broker or dealer must:

 

  · Obtain financial information and investment experience objectives of the person; and

 

  · Make a reasonable determination that the transactions in penny stocks are suitable for that person and the person has sufficient knowledge and experience in financial matters to be capable of evaluating the risks of transactions in penny stocks.

 

The broker or dealer must also deliver, prior to any transaction in a penny stock, a disclosure schedule prescribed by the Commission relating to the penny stock market, which, in highlight form:

 

  · Sets forth the basis on which the broker or dealer made the suitability determination; and

 

  · That the broker or dealer received a signed, written agreement from the investor prior to the transaction.

 

Generally, brokers may be less willing to execute transactions in securities subject to the "penny stock" rules. This may make it more difficult for investors to dispose of our common stock and cause a decline in the market value of our stock.

 

11

 

 

Financial Industry Regulatory Authority, Inc. (“FINRA”) sales practice requirements may limit a shareholder’s ability to buy and sell our common stock.

 

In addition to the “penny stock” rules described above, FINRA has adopted rules that require that in recommending an investment to a customer, a broker-dealer must have reasonable grounds for believing that the investment is suitable for that customer. Prior to recommending speculative low-priced securities to their non-institutional customers, broker-dealers must make reasonable efforts to obtain information about the customer’s financial status, tax status, investment objectives and other information. Under interpretations of these rules, FINRA believes that there is a high probability that speculative low-priced securities will not be suitable for at least some customers. FINRA requirements make it more difficult for broker-dealers to recommend that their customers buy our common stock, which may limit your ability to buy and sell our stock and have an adverse effect on the market for our shares.

 

Our stock is thinly traded, so you may be unable to sell your shares at or near the quoted bid prices if you need to sell a significant number of your shares.

 

The shares of our common stock are thinly-traded on the OTCQB, meaning that the number of persons interested in purchasing our common stock at or near bid prices at any given time may be relatively small or non-existent. As a consequence, there may be periods of several days or more when trading activity in our shares is minimal or non-existent, as compared to a seasoned issuer which has a large and steady volume of trading activity that will generally support continuous sales without an adverse effect on share price. We cannot give you any assurance that a broader or more active public trading market for our common stock will develop or be sustained, or that current trading levels will be sustained. Due to these conditions, we can give you no assurance that you will be able to sell your shares at or near bid prices or at all if you need money or otherwise desire to liquidate your shares.

 

Shares eligible for future sale may adversely affect the market.

 

From time to time, certain of our stockholders may be eligible to sell all or some of their shares of common stock by means of ordinary brokerage transactions in the open market pursuant to Rule 144 promulgated under the Securities Act, subject to certain limitations. In general, pursuant to amended Rule 144, non-affiliate stockholders may sell freely after six months subject only to the current public information requirement. Affiliates may sell after six months subject to the Rule 144 volume, manner of sale (for equity securities), and current public information and notice requirements. Any substantial sales of our common stock pursuant to Rule 144 may have a material adverse effect on the market price of our common stock.

 

If we sell shares of our common stock under the Standby Equity Distribution Agreement, our stockholders will experience immediate dilution and, as a result, our stock price may go down.

 

Pursuant to the Standby Equity Distribution Agreement, we may sell up to $8,000,000 of shares of our common stock over a 24-month period at our discretion and subject to certain limitations, and, as consideration for YA II PN, Ltd’s (“YA”) entering into the Standby Equity Distribution Agreement, we agreed to issue to YA an aggregate of up to 95,847 commitment shares.

 

The sale of shares of our common stock pursuant to the Standby Equity Distribution Agreement will have a dilutive impact on our existing stockholders. The number of shares ultimately offered for sale by YA under this prospectus supplement is dependent upon the number of shares we elect to sell to YA under the Standby Equity Distribution Agreement. YA may ultimately purchase all, some or none of the $8,000,000 of shares of common stock that, together with the commitment shares, are the subject of this statement.

 

YA may resell all, some or none of the shares we issue to it under the Standby Equity Distribution Agreement. Sales by YA of shares acquired pursuant to the Standby Equity Distribution Agreement could cause the market price of our common stock to decline, which decline could be significant. The sale of a substantial number of shares of our common stock by YA, or the anticipation of such sales, could make it more difficult for us to sell equity or equity-related securities in the future at a time and at a price that we might otherwise wish.

 

We could issue additional common stock, which might dilute the book value of our common stock.

 

Our Board of Directors has authority, without action or vote of our shareholders, to issue all or a part of our authorized but unissued shares. Such stock issuances could be made at a price that reflects a discount or a premium from the then-current trading price of our common stock. In addition, in order to raise capital, we may need to issue securities that are convertible into or exchangeable for a significant amount of our common stock. These issuances would dilute the percentage ownership interest, which would have the effect of reducing your influence on matters on which our shareholders vote and might dilute the book value of our common stock. You may incur additional dilution if holders of stock options, whether currently outstanding or subsequently granted, exercise their options, or if we issue warrants in the future and such warrant holders exercise their warrants to purchase shares of our common stock.

 

12

 

 

Our common stock could be further diluted as a result of the issuance of convertible securities, warrants or options.

 

In the past, we have issued convertible securities (such as convertible debentures and notes), warrants and options in order to raise money or as compensation for services and incentive compensation for our employees and directors. We have shares of common stock reserved for issuance upon the exercise of certain of these securities and may increase the shares reserved for these purposes in the future. Our issuance of these convertible securities, options and warrants could affect the rights of our stockholders, could reduce the market price of our common stock or could result in adjustments to exercise prices of outstanding warrants (resulting in these securities becoming exercisable for, as the case may be, a greater number of shares of our common stock), or could obligate us to issue additional shares of common stock to certain of our stockholders. 

 

We may experience volatility in our stock price, which may adversely affect the trading price of our common stock.

 

The sale prices of our common stock as reported on the OTCQB have and may continue to exhibit volatility. Factors such as the following may affect the volatility in our stock price:

 

· our quarterly operating results;

 

· announcements of regulatory developments or technological innovations by us or our competitors;

 

· changes in our relationship with our vendors, distributors or other strategic partners;

 

· government regulation; and

 

· developments in patent or other technology ownership rights;

 

Other factors which may affect our stock price include general changes in the economy, the financial markets or the industries in which we target our products and services.

 

Trading on the OTCQB is volatile and sporadic, which could depress the market price of our common stock and make it difficult for our security holders to resell their common stock.

 

Our common stock is quoted on the OTCQB tier of the OTC Markets Group, Inc. Trading in securities quoted on the OTCQB is often thin and characterized by wide fluctuations in trading prices due to many factors, some of which may have little to do with our operations or business prospects. This volatility could depress the market price of our common stock for reasons unrelated to our business or operating performance. Moreover, the OTCQB is not a stock exchange, and trading of securities on the OTCQB is often more sporadic than the trading of securities listed on a stock exchange like The Nasdaq Capital Market or the NYSE American. These factors may result in investors having difficulty reselling any shares of our common stock.

 

Recent outbreak of Coronavirus has led to restrictions on travel and public meetings and has disrupted markets and shipping schedules.

 

The recent emergence of the COVID-19 virus pandemic has created global restrictions on travel and meetings, temporary but unlimited closure of businesses and business activities, major economic uncertainties leading to unemployment, loss of customers and suppliers, and reluctance of business management to make critical commitments and, instead, conserve cash. At this stage, we are unable to quantify the impact of the virus on our current or future business, but it could make it extremely difficult to contract with new customers, sell our products or services and manage our supply chain.

 

We do not intend to pay dividends.

 

We do not anticipate paying cash dividends on our common stock in the foreseeable future. We may not have sufficient funds to legally pay dividends. Even if funds are legally available to pay dividends, we may nevertheless decide in our sole discretion not to pay dividends. The declaration, payment and amount of any future dividends will be made at the discretion of our board of directors, and will depend upon, among other things, the results of our operations, cash flows and financial condition, operating and capital requirements, and other factors our board of directors may consider relevant. There is no assurance that we will pay any dividends in the future, and, if dividends are paid, there is no assurance with respect to the amount of any such dividend.

 

Voting power of our shareholders is highly concentrated by insiders.

 

Our officers, directors and affiliates currently own approximately 46% of our outstanding Common Stock. Such concentrated control of the Company may adversely affect the value of our Common Stock. If you acquire our Common Stock, you may have no effective voice in our management. Sales by our insiders or affiliates, along with any other market transactions, could affect the value of our Common Stock.

 

13

 

 

Our articles of incorporation allow for our board to create a new series of preferred stock without further approval by our stockholders, which could adversely affect the rights of the holders of our Common Stock.

 

Our Board of Directors has the authority to fix and determine the relative rights and preferences of preferred stock. Our Board of Directors have the authority to issue up to 20,000,000 shares of our preferred stock terms of which may be determined by the Board without further stockholder approval. As a result, our Board of Directors could authorize the issuance of a series of preferred stock that would grant to holders the preferred right to our assets upon liquidation, the right to receive dividend payments before dividends are distributed to the holders of Common Stock and the right to the redemption of the shares, together with a premium, prior to the redemption of our Common Stock.

 

In addition, our Board of Directors could authorize the issuance of a series of preferred stock that has greater voting power than our Common Stock or that is convertible into our Common Stock, which could decrease the relative voting power of our Common Stock or result in dilution to our existing stockholders.

 

ITEM 1B. UNRESOLVED STAFF COMMENTS

 

Smaller reporting companies such as us are not required to provide the information required by this item.

 

ITEM 2. PROPERTIES

 

Our principal executive office is located 1999 S. Bascom Ave., Suite 700, Campbell, CA 95008, and the telephone number at such address is 408-663-5247. The headquarters for KTC are located at 6355 Nancy Ridge Drive, San Diego CA 92121, and the telephone number at such address is 858-866-8478.

 

ITEM 3. LEGAL PROCEEDINGS

 

We are not currently a party to any legal or administrative proceedings. Our current officers and directors have not been convicted in a criminal proceeding nor have they been permanently or temporarily enjoined, barred, suspended or otherwise limited from involvement in any type of business, securities or banking activities.

 

ITEM 4. MINE SAFETY DISCLOSURES

 

Not applicable.

 

14

 

 

PART II

 

ITEM 5. MARKET FOR COMMON EQUITY AND RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES

 

Market for Common Equity and Related Stockholder Matters

 

Our common stock began trading on OTCQB on July 18, 2018, and currently trades under the symbol “KULR.” The following table sets forth the quarterly high and low sales prices of our common stock since we began trading. Such prices are inter-dealer quotations without retail mark-ups, mark-downs or commissions, and may not represent actual transactions.

  

Fiscal Year Ending December 31, 2020            
Quarter Ended   High $     Low $  
June 30, 2020*     2.00       0.88  
March 31, 2020     1.50       0.75  

*through May 11, 2020

 

Fiscal Year Ending December 31, 2019            
Quarter Ended   High $     Low $  
December 31, 2019     2.00       1.25  
September 30, 2019     1.89       1.05  
June 30, 2019     2.50       1.76  
March 31, 2019     4.00       1.76  

 

Fiscal Year Ending December 31, 2018            
Quarter Ended   High $     Low $  
December 31, 2018     4.25       2.25  
September 30, 2018     5.00       0.01  

 

Securities Authorized for Issuance Under Equity Compensation Plans

 

As described above, KULR filed the December Information Statement regarding the adoption of the November 5 Resolutions by written consent in lieu of shareholder meeting. As part of the November 5 Resolutions, KULR adopted and ratified the KULR Technology Group 2018 Equity Incentive Plan (the “2018 Plan”). Subject to certain adjustments, the 2018 Plan, the total number of shares of common stock which may be purchased or granted directly under the plan shall not exceed fifteen million (15,000,000). The 2018 Plan is generally administered by the Company’s Board of Directors (the “Board”) or a committee of two (2) or more independent, non-employee directors (the “Plan Committee”). The Board or the Plan Committee, as applicable, has the power to determine the participants (the “Participants”) to whom awards under the 2018 Plan (the “Plan Awards”) shall be made. The 2018 Plan allows for the award of, stock, stock options, and shares of restricted stock. Stock options granted under the Plan may be either incentive stock options (an “ISO”) qualifying under Section 422 of the Internal Revenue Codes of 1986, as amended (the “Code”) or non-qualified stock options (a “NQSO”). An ISO may only be issued to employees of KULR. ISOs may be granted to officers or directors, provided they are also employees of KULR.

 

The following table sets forth, as of December 31, 2019, our securities authorized for issuance under any equity compensation plans approved by our stockholders:

 

Plan Category   Number of 
securities
to be issued upon
exercise of
outstanding 
options,
warrants and
rights
(a)
    Weighted-average
exercise
price of
outstanding options,
warrants
and rights
(b)
    Number of securities
remaining available for
future issuance under
equity 
compensation plans
(excluding securities
reflected in
column (a))
(c)
 
Equity compensation plans approved by security holders     385,000     $ 0.66       14,450,000  
Equity compensation plans not approved by security holders     -       -       -  
                         
Total     385,000     $ 0.66       14,450,000  

 

15

 

 

Stock Transfer Agent

 

Our stock transfer agent of our Common Stock is VStock Transfer LLC, located at 18 Lafayette Pl, Woodmere, NY 11598.

 

Common Shareholders

 

On May 14, 2020, we had approximately 114 shareholders of record.

 

Dividends

 

The Company has not paid any dividends to date. The Company intends to employ all available funds for the growth and development of its business, and accordingly, does not intend to declare or pay any dividends in the foreseeable future.

 

Recent Sales of Unregistered Securities

 

During the year ended December 31, 2019, KULR sold an aggregate of 1,361,059 shares of our common stock at a purchase price of $0.66 per share, for aggregate gross proceeds of $898,300 to certain accredited investors.

 

During the year ended December 31, 2019, KULR issued an aggregate of 45,966 shares of our restricted common stock to certain consultants for services provided to KULR.

 

All of the previously described issuances of securities were made pursuant to the exemption from registration at Section 4(a)(2) and/or Rule 506 of Regulation D under the Securities Act for either transactions not involving a public offering or for transactions with an “accredited investor” as defined under the Securities Act. 

 

ITEM 6. SELECTED FINANCIAL DATA

 

We are a smaller reporting company, as defined by Rule 229.10(f)(1) and therefore are not required to provide the information required by this Item.

 

ITEM 7. MANAGEMENT'S DISCUSSION AND ANALYSIS OR PLAN OF OPERATION

 

The following discussion and analysis of the results of operations and financial condition of KULR Technology Group, Inc. ("KULR") and its wholly-owned subsidiary, KULR Technology Corporation (“KTC”) (collectively referred to as “KULR” or the “Company”) as of and for the years ended December 31, 2019 and 2018 should be read in conjunction with our consolidated financial statements and the notes to those consolidated financial statements that are included elsewhere in this Annual Report. References in this Management’s Discussion and Analysis of Financial Condition and Results of Operations to “us”, “we”, “our” and similar terms refer to the Company. This Management’s Discussion and Analysis of Financial Condition and Results of Operations contains statements that are forward-looking. These statements are based on current expectations and assumptions that are subject to risk, uncertainties and other factors. These statements are often identified by the use of words such as “may,” “will,” “expect,” “believe,” “anticipate,” “intend,” “could,” “estimate,” or “continue,” and similar expressions or variations. Actual results could differ materially because of the factors discussed in “Risk Factors” elsewhere in this Annual Report, and other factors that we may not know.

 

Overview

 

KULR Technology Group, Inc., through our wholly-owned subsidiary KULR Technology Corporation, develops and commercializes high-performance thermal management technologies for electronics, batteries, and other components across an array of applications. Currently, we are focused on targeting the following applications: electric vehicles and autonomous driving systems (collectively referred to herein as “E-Mobility”); artificial intelligence and Cloud computing; energy storage; and 5G communication technologies. Our proprietary core technology is a carbon fiber material, with roots in aerospace and defense, which provides what we believe to be superior thermal conductivity and heat dissipation in an ultra-lightweight and pliable material. By leveraging our proprietary cooling solutions that have been developed through longstanding partnerships with NASA, the Jet Propulsion Lab and others, our products and services make E-Mobility battery powered products safer and more stable.

 

16

 

 

Our management believes that the E-Mobility industry has created and will create significant new opportunities for the application of our technology and know-how. We believe these new opportunities will be further driven by certain changing preferences that we have observed in younger generations that must increasingly cope with higher population density, global warming, and the rapidly evolving communications and computing needs of their personal devices and the surrounding infrastructure. As a result, we predict that the younger generations will increasingly prefer to attend meetings by video conference; rent a car, bike, or scooter, or call an app-based car service instead of owning a vehicle; and leverage the Cloud to perform tasks traditionally done in person, such as shopping for lunch, clothes, electronics and other consumer goods that also leverages an expanding E-Mobility delivery network.

 

 

In addition to evolving demands led by consumer-preferences, we have observed trending manufacturer-led opportunities in industries that have become increasingly more reliant on the Cloud, on portability and on high-demand processing power. For example, car manufacturers are increasingly providing options that take over the responsibility for driving, diagnosing its own service requirements and analyzing on-board systems data and efficiency. The communications and entertainment industries are leveraging increasingly more powerful and portable devices to deliver live and high-definition content and experiences. These innovations will require high bandwidth communication devices that can handle the power drain and computational requirements to keep up with the sophisticated security and software tools that will power these advanced product offerings. As a result of these manufacturer and consumer trends, we believe that the new generations of high-powered, small form-factor semiconductors are out-pacing the ability to control unwanted heat generation in lithium ion batteries.

 

The above-described advances in micro technology, portable power, and compact energy efficient devices linked to an ever-widening Internet of Things (“IoT”) via the Cloud are driving opportunities that form the focus of the Company’s business development plan. We believe that our core technology and historical development focus on improving lithium-ion battery performance and safety, positions us in a competitively advantageous position to enhance key components to the evolving mobile applications for a wide range of consumer products and IoT. We have found that as chip performance increases, power consumption increases, and more heat is generated as a byproduct. When chip size reduces, there is an increased potential for a hot spot on the chip, which can degrade system performance, or even cause spontaneous combustion. However, electronic system components must operate within a specific temperature range on both the high and low end to operate properly. After strenuous testing, we believe we have developed heat management solutions that significantly improve upon traditional heat storage and dissipation solutions and improve upon their rigidity and durability. We also believe that the traditional solutions are not equipped to handle the evolving marketplace. However, through a combination of custom design services and provision of proprietary hardware solutions, our products reduce manufacturing complexity and provide a lighter weight solution than traditional thermal management materials and, we believe, can meet the heat management demands of components and batteries being designed into the newest mobile technologies and applications.

 

Our management’s growth strategy has put particular focus on targeting E-Mobility applications for its core technology. We believe we are well-positioned to provide a broad range of E-mobility solutions, and intend to expand our business through internal growth and acquisition. In the case of acquisitions, we seek to acquire businesses in related markets that are synergistic to our existing operations, technologies, and management experience. This focus will highlight markets in which we can: (1) integrate our existing technology into the acquiree’s product offerings or simultaneously offer our products and services through the acquiree’s customer base and channels; (2) gain a leading market position and provide vertically integrated services where we can secure economies of scale, premium market positioning, and operational synergies; and/or (3) establish a leading position in selected markets and channels of the acquiree through a joint broad-based, hi-tech, E-Mobility branding campaign. We have developed an acquisition discipline based on a set of financial, market and management criteria to evaluate opportunities. To date, we have evaluated two acquisition opportunities under such criteria and, together with the management of the potential target, determined that the anticipated synergies would not be realized in the anticipated timetable. If we were to successfully close an acquisition, we would seek to integrate it while minimizing disruption to our existing operations and those of the acquired business, while exploiting the technical and managerial synergies from integration.

 

We have not yet achieved profitability and expect to continue to incur cash outflows from operations. It is expected that our research and development and general and administrative expenses will continue to increase and, as a result, we will eventually need to generate significant product revenues to achieve profitability. These conditions indicate that there is substantial doubt about our ability to continue as a going concern within one year after the financial statement issuance date. Historically, we have been able to raise funds to support our business operations, although there can be no assurance that we will be successful in raising additional funds in the future. Furthermore, as described below, we remain focused on growing our operations in order to limit cash outflows and eventually achieve profitability, although no assurances can be made that we will achieve such goals.

 

Recent Developments

 

In January 2020, an outbreak of a new strain of coronavirus, COVID-19, was identified in Wuhan, China. Through the first quarter of 2020, the disease became widespread around the world, and on March 11, 2020, the World Health Organization declared a pandemic. Our business is dependent on developing new markets and new products to be used on a global basis, thus restrictions on travel could lead to reduced demand for our products and interruptions to supply chains. Also, the local regulations such as “Shelter in Place” will affect our ability to maintain regular R&D and manufacturing schedules as well as the capability to meet customer demands timely. Given the uncertainty around the extent and timing of the potential future spread or mitigation of the Coronavirus and around the imposition or relaxation of protective measures, we cannot reasonably estimate the impact to our future results of operations, cash flows, or financial condition.

 

Decontamination Solutions

 

In response to the unprecedented demand for solutions to combat the spread of COVID-19 (and other viruses) and in response to an opportunity that arose in connection with our ongoing customer engagements and strategic relationships, we recently explored the launch of a suite of commercial and consumer products that utilize a Hypochlorous-Acid based microbial decontamination liquid.  Although no assurance can be made that we will be able to commercialize these decontamination products or that there will be demand for such products, we believe that we are capable of producing or acquiring substantial quantities of the decontamination liquid to deploy in a suite of decontamination delivery products and technology that we are actively developing.  In order to advance these efforts and to test the efficacy of the decontamination liquid, we engaged an independent lab to test our solution but we do not yet have any lab results. 

 

Paycheck Protection Program Loan

 

On April 27, 2020, we received the proceeds of a $155,226 loan in connection with the CARES Act Paycheck Protection Program (PPP) being administered by the Small Business Administration.

 

Standby Equity Distribution Agreement

 

On February 27, 2020, we entered into a Standby Equity Distribution Agreement with YAII PN, Ltd., a Cayman Island exempt limited partnership (“YAII”), pursuant to which the Company may, at its discretion, periodically sell to YAII up to $8,000,000 of shares Common Stock. For each share of Common Stock purchased under the Standby Equity Distribution Agreement (the “Shares”), YAII will pay the Company 80% of the lowest daily volume weighted average price of the Common Stock on the OTC Markets OTCQB or other principal market on which the Common Stock is traded for the five days immediately following the date the Company delivers notice requiring YAII to purchase the Shares under the Standby Equity Distribution Agreement. The Company agreed to issue, without receiving additional consideration, to YAII 95,847 shares of Common Stock as commitment shares in consideration for entering into the Standby Equity Distribution Agreement.

 

Note Purchase Agreement and Promissory Note

 

The Company also entered into a Note Purchase Agreement, dated February 27, 2020, with YAII, pursuant to which YAII purchased a full recourse promissory note (the “Note”) in the original principal amount of $1,500,000 (“Principal Amount”). In consideration for the issuance of the Note by the Company, the purchase price of the Note paid by YAII was equal to the Principal Amount minus an original issue discount equal to 6%. The Note bears no interest and will become immediately due and payable on May 31, 2021 or upon acceleration, redemption or otherwise upon the occurrence of an event of default, as set forth in the Note. The Company will repay the Principal Amount in monthly installments as set forth in the Note. The Company may, at its discretion, prepay any installment amount or the principal amount, subject to a payment premium equal to the 10% of the amount being prepaid.

 

PPR Product License and Supply Agreement - Americase’s Battery Bag

 

On April 13, 2020, we announced that it entered into a license and supply agreement with Americase, LLC, granting a license for Americase’s use of our passive propagation resistant (PPR) technology and agreeing to supply our PPR materials for Americase’s “Battery Bag” products.

 

17

 

 

During the year ended December 31, 2019, we sold an aggregate of 1,361,059 shares of common stock at $0.66 per share to accredited investors for aggregate gross cash proceeds of $898,300.

 

During the year ended December 31, 2019, 16,371 shares of the Series B Convertible Preferred Stock, were converted into 818,550 shares of common stock.

 

Customer Engagements

 

During the year ended December 31, 2019, we successfully added to our list of active customers and continue to expand our relationships with prospective customers. Typically, a new customer engagement starts out with initial service projects that include the analysis of customer heat management challenges, evaluation of potential solutions and designs, and selection of solutions that may be addressed by our existing product or that require new designs and features, leading to new general or custom products. The process of designing next generation products for prospective customers is lengthy. However, we believe we have made significant progress working with existing and prospective customers on developing product solutions. Once customer solutions are identified and developed, we expect the customer to submit product purchase orders. Although no assurances can be made that such purchase orders would be placed, such orders could not only lead to higher-volume production sales but could (i) generate significantly higher gross margins as compared to the earlier engagement stage service projects, and (ii) provide greater prospects for scaling.

 

Active Development Projects

 

As we continue to advance our new customer engagements and submit our solutions against competitor solutions in various independent and customer testing, we believe our carbon-fiber based electronics and battery cooling technologies are superior to traditionally used heat sinks (such as aluminum and copper heat sinks) and thermal interface materials (such as thermal gels and pads). We believe that our solutions are not only generally more thermally conductive, but also lighter in weight and in many cases offer product design flexibility. For instance, our HYDRA TRS products have been independently tested to show that they have outperformed our competitors’ solutions in preventing cell-to-cell thermal runaway propagation and requiring higher trigger temperatures at which the thermal runaway event occurs. Our TRS battery storage bags were selected by the U.S. government’s NASA to transport and store laptop batteries aboard the International Space Station. Additionally, we are currently working with top tier companies in the medical device, electric aircraft, and global automaker industries on designing safer, more effective battery heat sink solutions. No assurances can be made, however, that any of our active development projects will result in continued or future sales revenues.

 

Standby Equity Distribution Agreement

 

On February 27, 2020, the Company entered into a Standby Equity Distribution Agreement with YAII PN, Ltd., a Cayman Island exempt limited partnership (the “Investor”), pursuant to which the Company may, at its discretion, periodically sell to Investor up to $8,000,000 of shares of the Company’s Common Stock (the “Offering”), par value $0.0001 per share. For each share of Common Stock purchased under the Standby Equity Distribution Agreement (the “Shares”), the Investor will pay the Company 80% of the lowest daily volume weighted average price of the Common Stock on the OTC Markets OTCQB or other principal market on which the Common Stock is traded for the five days immediately following the date the Company delivers notice requiring the Investor to purchase the Shares under the Standby Equity Distribution Agreement.

 

The Investor’s obligation to purchase the Shares under the Standby Equity Distribution Agreement is subject to certain conditions, including the Company maintaining the effectiveness of a registration statement for the securities sold under the Standby Equity Distribution Agreement, and is limited to $100,000 per advance. In addition, the Company may not request advances if the Shares to be issued would result in the investor owning more than 4.99% of the Company’s outstanding Common Stock, with any such request being automatically modified to reduce the advance amount.

 

The commitment period under the Standby Equity Distribution Agreement commenced on February 27, 2020 (the “Effective Date”) and expires on the earliest to occur of (i) first day of the month following the twenty-four months after the Effective Date, (ii) on which the Investor has purchased an aggregate amount of $8,000,000 of Shares under the Standby Equity Distribution Agreement, or (iii) the date the Standby Equity Distribution Agreement is earlier terminated.

 

The Standby Equity Distribution Agreement contains customary representations, warranties and agreements of the Company and the Investor, indemnification rights and other obligations of the parties. The Company has the right to terminate the Standby Equity Distribution Agreement at any time upon prior written notice, at no cost to the Company, provided that (i) there are no outstanding advances which have yet to be issued and (ii) the Company has paid all amounts owed to the Investor.

 

18

 

 

The Company agreed to issue to the Investor 95,847 shares of Common Stock as commitment shares in consideration for entering into the Standby Equity Distribution Agreement. The Company will not receive any cash proceeds from the issuance of these commitment shares.

 

The Offering will be made pursuant to the Company’s shelf registration statement on Form S-3 (File No. 333-232614), filed with the Securities Exchange Commission on July 11, 2019, and pursuant to a prospectus supplement or prospectus supplements or successor registration statements, or otherwise, under Section 5 of the Securities Act of 1933, as amended, and the rules and regulations promulgated thereunder (the “Securities Act”).

 

The Company expects to use the proceeds from the Offering for working capital and other corporate purposes, including the repayment of any outstanding debt. The Investor has covenanted not to cause or engage in any manner whatsoever, any direct or indirect short selling or hedging of the Company’s shares of Common Stock. In connection with the Offering, the Company paid the Investor a structuring fee equal to $15,000 and agreed to pay a financial advisor an 8% fee on any aggregate gross proceeds of each Offering received by the Company from the sale of Shares that exceeds $1,500,000.

 

Note Purchase Agreement and Promissory Note

 

The Company also entered into a Note Purchase Agreement, dated February 27, 2020, with the Investor, pursuant to which the Investor purchased a full recourse promissory note (the “Note”) in the original principal amount of $1,500,000 (“Principal Amount”). In consideration for the issuance of the Note by the Company, the purchase price of the Note paid by the Investor was equal to the Principal Amount minus an original issue discount equal to 6%.

 

The Note bears no interest and will become immediately due and payable on May 31, 2021 or upon acceleration, redemption or otherwise upon the occurrence of an event of default, as set forth in the Note. The Company will repay the Principal Amount in monthly installments as set forth in the Note. The Company may, at its discretion, prepay any installment amount or the principal amount, subject to a payment premium equal to the 10% of the amount being prepaid.

 

The Company paid a financial advisor a $130,000 advisory fee in connection with the Note Purchase Agreement and Note.

 

Consolidated Results of Operations

 

Year Ended December 31, 2019 Compared With Year Ended December 31, 2018

 

Revenues

 

Our revenues consisted of the following types:

 

    For the Years Ended  
    December 31,  
    2019     2018  
Product sales   $ 735,431     $ 1,096,040  
Contract services     94,967       177,988  
Total revenue   $ 830,398     $ 1,274,028  

 

For the years ended December 31, 2019 and 2018, we generated $830,398 and $1,274,028 of revenues, a decrease of $443,630, or 35%. Our revenues during the year ended December 31, 2019 consisted of sales of our component product, CFV thermal management solution, sales of an Original Equipment Manufacturer (“OEM”) product as well as certain research and development contract services. Our revenues during the year ended December 31, 2018 consisted of sales of our component product, CFV thermal management solution, sales of an Original Equipment Manufacturer (“OEM”) product as well as certain research and development contract services. We are still in the early stages of business growth and development of customer relationships which typically begin on a project by project basis, leading to limited volume trials and eventually, product sales. As a result, in the absence of a large installed customer base, our sales can be lumpy and vary from one period to another. The decrease in revenue in 2019 was due to contracts that ended during 2018. Our revenue for the year ended December 31, 2019 and 2018 was generated from 27 and 13 different customers, respectively.

 

Cost of Revenues and Gross Margins

 

Cost of revenues consists of the cost of our products as well as labor expenses directly related to product sales or research contract services.

 

19

 

 

Generally, we earn greater margins on revenue from products as compared to revenue from services, so product mix plays an important part in our reported average margins for any period. Also, we are introducing new products at an early stage in our development cycle and the margins earned can vary significantly between periods, customers and products due to the learning process, customer negotiating strengths, and product mix.

 

Our customers and prospective customers are large organizations with multiple levels of management, controls/procedures, and contract evaluation/authorization. Furthermore, our solutions are new and do not necessarily fit into pre-existing patterns of purchase commitment. Accordingly, the business activity cycle between expression of initial customer interest to shipping, acceptance and billing can be lengthy, unpredictable and lumpy, which can influence the timing, consistency and reporting of sales growth.

 

For the years ended December 31, 2019 and 2018, cost of revenues was $226,505 and $336,654, respectively, a decrease of $110,149, or 33%. The decrease was primarily due to decreased volume of contracts in the 2019 period, which required less labor and materials. We generated a gross profit of $603,893 and $937,374 for the years ended December 31, 2019 and 2018, respectively. This represents a decrease in gross profit of $333,841, primarily resulting from the decrease in product revenue due to contracts that ended during 2018. Our gross profit on sales is broadly similar in both periods at 73% for the year ended December 31, 2019 compared to 74% for the year ended December 31, 2018.

 

Research and Development

 

Research and development (“R&D”) include expenses incurred in connection with the R&D of our CFV thermal management solution and non-cash stock-based compensation expenses. R&D expenses are expensed as they are incurred.

 

For the year ended December 31, 2019, R&D expenses decreased by $5,919, or 1% to $502,225 from $508,144 for the year ended December 31, 2018.

 

Selling, General and Administrative

 

Selling, general and administrative expenses consist primarily of salaries, payroll taxes and other benefits, legal and professional fees, stock-based compensation, marketing, travel, rent and office expenses.

 

For the year ended December 31, 2019, selling, general and administrative expenses decreased by $429,877, or 17% to $2,080,941 from $2,510,818 for the year ended December 31, 2018. The decrease is primarily due to decreased non-cash stock-based compensation expense of approximately $221,000  due to certain awards becoming fully vested in the second quarter of 2018, decreased salaries and other benefits of approximately $78,000 due to lower headcount, decreased professional fees of approximately $101,000  partially offset by increased rent expense of approximately $35,000 due to entering into a new lease agreement in May 2018.

 

Other Income (Expense)

 

For the year ended December 31, 2019, other income (expense) decreased by $23,829 to $(480) from $23,349 for the year ended December 31, 2018. The decrease is primarily due to other income recognized during the year ended December 31, 2018 as a result of changes in the changes in the fair value of accrued issuable equity.

 

Liquidity and Capital Resources

 

For the years ended December 31, 2019 and 2018, cash used in operating activities was $1,188,339 and $1,359,114, respectively. Our cash used in operations for the year ended December 31, 2019 was primarily attributable to our net loss of $1,979,753, adjusted for non-cash expenses in the aggregate amount of $237,990, as well as $553,424 of net cash provided by changes in the levels of operating assets and liabilities. Our cash used in operations for the year ended December 31, 2018 was primarily attributable to our net loss of $2,058,239, adjusted for net non-cash expenses in the aggregate amount of $453,022, as well as $246,103 of net cash provided by changes in the levels of operating assets and liabilities.

 

For the year ended December 31, 2019, cash used in investing activities was $0 compared to cash used in investing activities of $16,609 during the year ended December 31, 2018. Cash used in investing activities during the year ended December 31, 2018 was due to purchases of equipment.

 

For the years ended December 31, 2019 and 2018, cash provided by financing activities was $1,067,300 and $709,858, respectively. Cash provided by financing activities during the year ended December 31, 2019 was due to the gross proceeds of common stock offering of $898,300 and proceeds from the issuance of our Series C Convertible Preferred Stock of $184,000, partially offset by cash offering cost paid of $15,000. Cash provided by financing activities during the year ended December 31, 2018 was due to the net proceeds of common stock offering of $679,000 and proceeds from the issuance of our Series B Convertible Preferred Stock of $30,858.

 

We have not yet achieved profitability and expect to continue to incur cash outflows from operations. It is expected that our research and development and general and administrative expenses will continue to increase and, as a result, we will eventually need to generate significant product revenues and/or raise additional capital to fund our operations. These conditions indicate that there is substantial doubt about our ability to continue as a going concern within one year after the financial statement issuance date.

 

20

 

 

Through December 31, 2019 we funded our operations on a month-to-month basis through the issuance of equity securities. Subsequent to year end, on February 27, 2020, we entered into a Standby Equity Distribution Agreement (“SEDA”), as described in Note 11 to these consolidated financial statements, as a result of which we drew down a note for $1,500,000 and established an equity based line of credit of up to an additional $6,500,000 to fund our ongoing business cash needs.

 

Our consolidated financial statements included elsewhere in this Annual Report on Form 10-K have been prepared in conformity with accounting principles generally accepted in the United States of America (“U.S. GAAP”), which contemplate our continuation as a going concern and the realization of assets and satisfaction of liabilities in the normal course of business. The carrying amounts of assets and liabilities presented in the consolidated financial statements do not necessarily purport to represent realizable or settlement values. The consolidated financial statements do not include any adjustment that might result from the outcome of this uncertainty.

 

Off-Balance Sheet Arrangements

 

There are no off-balance sheet arrangements between us and any other entity that have, or are reasonably likely to have, a current or future effect on financial conditions, changes in financial conditions, revenues or expenses, results of operations, liquidity, capital expenditures or capital resources that is material to stockholders.

 

Critical Accounting Policies

 

See Note 3 – Summary of Significant Accounting Policies of our consolidated financial statements included within this Annual Report for our critical accounting policies.

 

Recently Issued Accounting Pronouncements

 

See Note 3 – Summary of Significant Accounting Policies of our consolidated financial statements included within this Annual Report for a summary of recently issued and adopted accounting pronouncements.

 

ITEM 7A. QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK

 

We are a smaller reporting company, as defined by Rule 229.10(f)(1) and are not required to provide the information required by this Item.

 

ITEM 8. FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA

 

See “Index to Consolidated Financial Statements” which appears on page F-1 of this Annual Report on Form 10-K. 

 

ITEM 9. CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE

 

On July 19, 2018, KULR dismissed Chen & Fan Accountancy (“C&F”) as its independent registered public accounting firm. The reports of C&F, on KULR’s financial statements for each of the past two fiscal years contained no adverse opinion or a disclaimer of opinion and were not modified as to uncertainty, audit scope or accounting principles. During the years ended December 31, 2017 and 2016 and during the subsequent interim period preceding the date of C&F’s dismissal there were (i) no disagreements with C&F on any matter of accounting principles or practices, financial statement disclosure or auditing scope or procedure, and (ii) no reportable events, as that term is defined by Item 304(a)(1)(v) of Regulation S-K adopted by the SEC.

 

On July 19, 2018, KULR appointed Marcum LLP (“Marcum”) as our new independent registered public accounting firm. During the two most recent fiscal years and through the date of our engagement, we did not consult with Marcum regarding either (1) the application of accounting principles to a specified transaction, either completed or proposed, or the type of audit opinion that might be rendered on our financial statements, or (2) any matter that was either the subject of a disagreement or a reportable event (as defined in Item 304(a)(1)(v) of Regulation S-K). In approving the selection of Marcum as KULR’s new independent registered public accounting firm, the board of directors considered all relevant factors. 

 

21

 

 

ITEM 9A. CONTROLS AND PROCEDURES

 

Evaluation of Disclosure Controls and Procedures

 

As of the end of the period covered by this Annual Report on Form 10-K, we carried out an evaluation, under the supervision and with the participation of our management, including our principal executive officer and principal financial officer, of the effectiveness of the design and operation of our disclosure controls and procedures (as defined in the Exchange Act Rules 13a-15(e) and 15d-15(e)) (the “Exchange Act”). Based on the foregoing evaluation, our principal executive officer and principal financial officer concluded that, as of December 31, 2019, our disclosure controls and procedures were effective at the reasonable assurance level.

 

Management's Report on Internal Control Over Financial Reporting

 

Our management, including our principal executive officer and principal financial officer, is responsible for establishing and maintaining adequate internal control over financial reporting (as defined in Rules 13a-15(f) and 15d-15(f) under the Exchange Act). Internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with U.S. GAAP. Our internal control over financial reporting includes those policies and procedures that: (i) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of our assets; (ii) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with U.S. GAAP, and that our receipts and expenditures are being made only in accordance with authorizations of our management and directors; and (iii) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of our assets that could have a material effect on the financial statements.

 

Under the supervision and with the participation of our management, including our principal executive officer and principal financial officer, we conducted an evaluation of the effectiveness of our internal control over financial reporting as of December 31, 2019, based on the Internal Control-Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO) (2013 Framework). Based on this evaluation under the 2013 Framework, our principal executive officer and principal financial officer have concluded that our internal control over financial reporting was effective as of December 31, 2019.

 

Changes in Internal Control Over Financial Reporting

 

There has been no change in our internal control over financial reporting that occurred during the fourth quarter of 2019 that has materially affected, or is reasonably likely to materially affect, our internal control over financial reporting, except as noted above as it relates to our successful remediation of a material weakness in internal controls.

 

Inherent Limitations of the Effectiveness of Controls

 

Management does not expect that our disclosure controls and procedures or our internal control over financial reporting will prevent or detect all error and fraud. A control system, no matter how well designed and operated, is based upon certain assumptions and can provide only reasonable, not absolute, assurance that its objectives will be met. Further, no evaluation of controls can provide absolute assurance that misstatements due to error or fraud will not occur or that all control issues and instances of fraud, if any, within the Company have been detected.

 

Attestation Report of Registered Public Accounting Firm

 

This Annual Report does not contain an attestation report of our independent registered public accounting firm related to internal control over financial reporting because the rules for smaller reporting companies provide an exemption from the attestation requirement.

 

ITEM 9B. OTHER INFORMATION 

 

None. 

 

22

 

 

PART III

 

ITEM 10. DIRECTORS, EXECUTIVE OFFICERS, AND CORPORATE GOVERNANCE

 

Executive Officers and Directors

 

Our executive officers and directors and their ages are as follows:

 

Name   Age     Office
Michael Mo   49     Chief Executive Officer and Chairman
Dr. Timothy Knowles   73     Director, Chief Technical Officer and Secretary
Simon Westbrook   71     Chief Financial Officer
Michael Carpenter   56     Vice President of Engineering

 

The term of office for each director is one year, or until the next annual meeting of the stockholders.

 

Michael Mo was appointed CEO and Director of the Company on March 16, 2011, is a technology entrepreneur and successful investor with over 20 years of experience in technology management, product development and marketing. In 2013, he co-founded KULR and has been serving as its CEO since then. From 2007 to 2015, Mr. Mo served as Senior Director of Business Development at Amlogic, Inc., a California high-tech company. In 2005, Mr. Mo founded Sympeer Technology and served as its CEO until 2008. In 1998, he founded Wish Solutions, and served as its CEO until 2001. Mr. Mo received his Master of Science in Electrical Engineering from the University of California at Santa Barbara in 1995.

 

Timothy R. Knowles was appointed CTO and Director of the Company, has over 30 Years of Thermal Management R&D and product development experience for the most challenging space and industrial applications. He conducted research and built building products for various space and industrial customers such as NASA, Boeing, Raytheon, Jet Propulsion Lab, and others. Since 1983, Dr. Knowles has been working as President at ELSI. In addition, in 2013, Dr. Knowles co-founded KULR and has been serving as its CTO since then. From 1977 to 1983, he was a postdoctoral research physicist at Hamburg University. Mr. Knowles received Ph.D. in Physics from University of California San Diego in 1977 and B.S. in Physics from University of Southern California in 1969.

 

Simon Westbrook was appointed Chief Financial Officer on March 15, 2018. In 2009, Mr. Westbrook founded and has since served as an officer of Aargo, Inc., a company specializing in financial consulting services to corporations in various tech-related industries. Prior to Aargo, Inc., Mr. Westbrook was CFO of Amber Networks, Inc., and the Chief Financial Officer of Sage, Inc. (NASDAQ: SAGI), a Silicon Valley company specializing in flat panel displays. Before joining Sage, Mr. Westbrook held a number of senior financial positions at Creative Technology (NASDAQ: CREAF), a leading PC multimedia company, and Atari Corp (AMEX: ATC), the video game and home computer company both in the USA and overseas. At various times, he has held positions as an advisory board member of the Silicon Valley Financial Executives Institute, and various technology start-up companies where he has assisted in strategic planning, fund raising and team development. Simon is a Chartered Accountant and holds a Master’s in Economics from Trinity College, Cambridge University.

 

Michael G. Carpenter serves as KULR’s Vice President of Engineering. Mr. Carpenter has been employed by ESLI since December 1983, serving as Director of the PCM Heatsink Group, Quality Manager, Facility Security Officer (FSO) in the Defense Industrial Security Program from 1988 to 1995. He also has been served as Safety Officer since he joined ESLI in 1983. Mr. Carpenter received his B.S. in Applied Mechanics from the University of California, San Diego in 1983.

 

The Company’s directors are elected at the annual meeting of shareholders to hold office until the annual meeting of shareholders for the ensuing year or until their successors have been duly elected and qualified. Officers are elected annually by the Board of Directors and serve at the discretion of the Board.

 

Director Independence

 

Currently no directors would qualify as independent as defined under NASDAQ Marketplace Rules. Our directors believe that retaining one or more additional directors who would qualify as independent as defined in the NASDAQ Marketplace Rules would be overly costly and burdensome and not warranted in the circumstances given the current stage of the Company’s development.

 

Family Relationships

 

There are no family relationships between any director and executive officer.

 

23

 

 

 

Involvement in Certain Legal Proceedings

 

Our directors, executive officers and control persons have not been involved in any of the following events during the past five years:

 

  any bankruptcy petition filed by or against any business of which such person was a general partner or executive officer either at the time of the bankruptcy or within two years prior to that time;

 

  any conviction in a criminal proceeding or being subject to a pending criminal proceeding (excluding traffic violations and other minor offenses);

 

  being subject to any order, judgment, or decree, not subsequently reversed, suspended or vacated, of any court of competent jurisdiction, permanently or temporarily enjoining, barring, suspending or otherwise limiting his involvement in any type of business, securities or banking activities; or

 

  being found by a court of competent jurisdiction (in a civil action), the SEC or the Commodity Futures Trading Commission to have violated a federal or state securities or commodities law, and the judgment has not been reversed, suspended, or vacated.

 

Section 16(a) Beneficial Ownership Compliance

 

Section 16(a) of the Exchange Act requires our directors and executive officers and persons who own more than 10% of the issued and outstanding shares of our common stock to file reports of initial ownership of common stock and other equity securities and subsequent changes in that ownership with the SEC. Officers, directors and greater than ten percent stockholders are required by SEC regulation to furnish us with copies of all Section 16(a) forms they file. To our knowledge, during the fiscal year ended December 31, 2019, our officers, directors and greater than 10% beneficial owners have complied with all applicable filing requirements of Section 16(a).

 

Code of Ethics

 

We do not currently have a Code of Ethics, as defined under the rules and regulations of the Exchange Act. The Company does not believe a Code of Ethics is necessary at this time.

 

Nomination Process

 

As of December 31, 2019, we did not affect any material changes to the procedures by which stockholders may recommend nominees to the Board of Directors. We do not have any defined policy or procedure requirements for stockholders to submit recommendations or nominations for directors. The Board of Directors believes that, given the current stage of our development, a specific nominating policy would be premature and of little assistance until our operations develop to a more advanced level. We do not currently have any specific or minimum criteria for the election of nominees to the Board of Directors and there is no specific process or procedure for evaluating such nominees. The board of directors assesses all candidates, whether submitted by management or stockholders, and makes recommendations for election or appointment.

 

A stockholder who wishes to communicate with the Board of Directors may do so by directing a written request addressed to our Chief Executive Officer at the address appearing on the face page of this annual report.

 

Committees of the Board

 

We currently do not have nominating, compensation or audit committee, or committees performing similar functions, nor do we have a written nominating, compensation or audit committee charter. The Board of Directors does not believe that it is necessary to have such committees at this time because it believes that the functions of such committees can be adequately performed by the Board of Directors.

 

24

 

 

ITEM 11. EXECUTIVE COMPENSATION

 

Summary Compensation Table

 

The following Summary Compensation Table sets forth all compensation earned in all capacities during the fiscal years ended December 31, 2019 and 2018 by (i) our principal executive officer, (ii) our two most highly compensated executive officers, other than our principal executive officer, who were serving as executive officers as of December 31, 2019 and whose total compensation for the 2019 fiscal year, as determined by Regulation S-K, Item 402, exceeded $100,000, (iii) a person who would have been included as one of our two most highly compensated executive officers, other than our principal executive officer, but for the fact that he was not serving as one of our executive officers as of December 31, 2019 (the individuals falling within categories (i), (ii) and (iii) are collectively referred to as the “Named Executive Officers”):

 

Name and Principal
Position
  Year     Salary     Bonus     Total Earned  
Michael Mo   2019     $ 161,785     $ -     $ 161,785 (1)
Chief Executive Officer   2018     $ 161,785     $ -     $ 161,785 (3)
Timothy Knowles   2019     $ 141,353     $ -     $ 141,353 (2)
Chief Technology Officer   2018     $ 141,353     $ -     $ 141,353 (4)
Michael Carpenter   2019     $ 124,459     $ -     $ 124,459  
VP of Engineering   2018     $ 124,459     $ -     $ 124,459  

 

(1) Of the aggregate $161,785 earned during 2019, cash compensation paid during 2019 was $28,154 and $135,425 remains unpaid as of December 31, 2019.
(2) Of the aggregate $141,353 earned during 2019, cash compensation paid during 2019 was $70,680 and $70,673 remains unpaid as of December 31, 2019.
(3) Of the aggregate $161,785 earned during 2018, cash compensation paid during 2018 was $78,247 and $83,539 still remains unpaid as of December 31, 2019.
(4) Of the aggregate $141,353 earned during 2018, cash compensation paid during 2018 was $103,117 and $38,236 still remains unpaid as of December 31, 2019.

 

Bonuses

 

Any bonuses granted in the future will relate to meeting certain performance criteria that are directly related to areas within the named executive’s responsibilities with the Company. As we continue to grow, more defined bonus programs may be established to attract and retain our employees at all levels.

 

Equity Compensation Plans

 

On August 15 and November 5, 2018, the Board of Directors and a majority of the Company’s shareholders, respectively, approved the 2018 Equity Incentive Plan (the “2018 Plan”). Under the 2018 Plan, 15,000,000 shares of common stock of the Company are authorized for issuance. The 2018 Plan provides for the issuance of incentive stock options, non-statutory stock options, rights to purchase common stock, stock appreciation rights, restricted stock, and restricted stock units to employees, directors and consultants of the Company and its affiliates. The 2018 Plan requires the exercise price of stock options to be not less than the fair value of the Company’s common stock on the date of grant.

 

Compensation of Directors

 

Because we are still in the development stage, our directors do not receive any compensation other than reimbursement for expenses incurred during the performance of their duties or their separate duties as officers of the Company.

 

25

 

 

Employment Contracts; Termination of Employment and Change-in-Control Arrangements

 

Although we have not entered into employment agreements with all of our officers and directors, we have agreed to pay the following salaries to our officers:

 

Name and Principal Position   Salary  
Michael Mo - CEO and Chairman   $ 161,785  
         
Dr. Timothy Knowles - CTO and Director   $ 141,353  
         
Simon Westbrook - CFO   $ 60,000  
         
Michael Carpenter - VP of Engineering   $ 124,459  

 

At the sole discretion of our Board of Directors, all officers are entitled to merit-based cash and equity bonuses.

 

ITEM 12. SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND RELATED STOCKHOLDER MATTERS

 

The following table provides the names and addresses of each person known to us who own more than 5% of the outstanding common stock as of the date of this annual report, and by our officers and directors. Except as otherwise indicated, all shares are owned directly. Unless otherwise indicated, the address of each of the persons shown is c/o KULR Technology Group, Inc., 1999 S. Bascom Ave. Suite 700. Campbell, CA 95008. 

 

    Amount of        
Name of Beneficial Owner   Beneficial Ownership     More than
5% (1)
 
Michael Mo (2) - CEO and Chairman     21,400,000       26 %
Dr. Timothy Knowles (3) - CTO and Director     15,600,000       19 %
Simon Westbrook - CFO     -       -  
Michael Carpenter - VP of Engineering     500,000       *  
All directors and executive officers as a group (4 persons)     37,500,000       46 %

 

* Less than 1%
(1) The percent of class is based on 81,187,970 shares of common stock issued and outstanding as of May 14, 2020.
(2) Consists of: 20,000,000 shares held directly by Mr. Mo  and 1,400,000 shares held jointly by Mr. Mo and his spouse, Linda Mo, and excludes 2,525,000 shares held by Mr. Mo’s son Alexander Mo and 2,525,000 shares held by Mr. Mo’s son Brandon Mo, over which shares Mr. Mo disclaims beneficial ownership, as Mr. Mo has no control over the dispositive or voting power over the shares and his sons no longer live in the same household as Mr. Mo.
(3) Consists of 15,600,000 shares held directly by Mr. Knowles and excludes 1,500,000 shares held by Mr. Knowles daughter, Sonja Irene Knowles, over which shares Mr. Knowles disclaims beneficial ownership, as Mr. Knowles has no control over the dispositive or voting power over the shares and his daughter no longer lives in the same household as Mr. Knowles.

 

Change in Control

 

We are not aware of any arrangement that might result in a change in control of the Company.

 

ITEM 13. CERTAIN RELATIONSHIPS AND RELATED PARTY TRANSACTIONS, AND DIRECTOR INDEPENDENCE

 

On June 19, 2017, we acquired all the issued and outstanding shares of KULR pursuant to the Share Exchange Agreement in exchange for the issuance of 50,000,000 of our Common Stock and KULR became our wholly owned subsidiary. Our Chief Executive Officer and Director, Michael Mo, and various members of his family were among the shareholders of KULR that entered into the Share Exchange Agreement along with our Chief Technical Officer and Director, Timothy Knowles, and various members of his family. Furthermore, Mr. Mo was an officer and director of both the Company and KULR prior to and after entering into the Share Exchange Agreement. Dr. Knowles was an officer and director of KULR prior to and after entering into the Share Exchange Agreement and became an officer and director of the Company after the closing of the Share Exchange Agreement.

 

26

 

 

On December 28, 2018, the Company’s Board of Directors authorized the issuance of one million (1,000,000) shares of its Series A Preferred Stock to its Chief Executive Officer, Michael Mo, in the future as a measure to protect the Company from an uninvited takeover . The rights, limitations and preferences of the Series A Preferred Stock, including the rights of its holders to cast one hundred (100) votes for each share of Series A Preferred Stock, are set forth in the Certificate of Designation of Series A Voting Preferred Stock, which was filed as Exhibit 3.1 to the Company’s Current Report on Form 8-K filed with the SEC as of June 12, 2017 and is incorporated herein by reference.

 

ITEM 14. PRINCIPAL ACCOUNTING FEES AND SERVICES

 

On July 19, 2018, the Company dismissed Chen & Fan Accountancy Corporation (“C&F”) and appointed Marcum LLP (“Marcum”) as its independent registered public accounting firm.

 

The following is a summary of the fees billed or expected to be billed to us for professional services rendered with respect to the fiscal years ended December 31, 2019 and 2018:

 

    For the Fiscal Year Ended  
    December 31,  
    2019     2018  
Audit Fees   $ 173,501     $ 170,874  
Tax Fees     22,850       26,005  
Total   $ 196,351     $ 196,879  

 

Audit Fees

 

Audit fees consist of fees billed for services rendered by our independent auditors during the years ended December 31, 2019 and 2018 for the audit and review of our financial statements.

 

Tax Fees

 

Tax fees consist of fees billed for services rendered by our tax preparers during the years ended December 31, 2019 and 2018 in connection with the preparation and filing of our income tax returns.

 

Pre-Approval Policies

 

Our Board of Directors, who acts as our audit committee, has adopted a policy governing the pre-approval by the Board of Directors of all services, audit and non-audit, to be provided to our Company by our independent auditors. Under the policy, the Board of Directors has pre-approved the provision by our independent auditors of specific audit, audit related, tax and other non-audit services as being consistent with auditor independence. Requests or applications to provide services that require the specific pre-approval of the board of directors must be submitted to the Board of Directors by the independent auditors, and the independent auditors must advise the board of directors as to whether, in the independent auditor’s view, the request or application is consistent with the SEC’s rules on auditor independence.

 

The Board of Directors has considered the nature and amount of the fees billed by Marcum and believes that the provision of the services for activities unrelated to the audit is compatible with maintaining the independence of Marcum.

 

27

 

 

PART IV

 

ITEM 15. EXHIBITS, FINANCIAL STATEMENT SCHEDULES

 

Exhibit
No.
  Description
2.1   Share Exchange Agreement, dated June 8, 2017 (1)
     
3.1   Articles of Incorporation of the Company (2)
     
3.2   Bylaws of the Company (2)
     
3.3   Certificate of Incorporation of KULR Technology Corporation (3)
     
3.4   Amended and Restated Certificate of Incorporation of KULR Technology Corporation (3)
     
3.5   By-laws of KULR Technology Corporation (3)
     
3.6   Certificate of Designation of Series A Voting Preferred Stock, filed on June 6, 2017 (1)
     
3.7   Certificate of Amendment to the Certificate of Incorporation, effective August 30, 2018 (8)
     
3.8   Certificate of Designation of Series B Convertible Preferred Stock, filed on December 6, 2018 (9)
     
3.9   Certificate of Amendment to the Certificate of Incorporation, effective December 31, 2018 (10)
     
3.10  

Certificate of Designation of Series C Convertible Preferred Stock, filed on August 19, 2019 (11)

     

4.1

 

Description of registrant’s securities registered pursuant to Section 12 of the Securities Exchange Act of 1934*

     
10.1   License and Development Agreement, dated April 15, 2013 (3)
     
10.2   Consulting Agreement, dated April 15, 2013 (3)
     
10.3   Letter of Intent by and between the Company and E3 Enterprise, dated April 20, 2016 (4)
     
10.4   Letter of Intent by and between the Company and KULR Technology Corporation (5)
     
10.5   Patent Assignment Agreement, dated November 10, 2016 (3)
     
10.6   Promissory Note issued by KULR Technology Corporation, dated March 31, 2017 (6)
     
10.7   Promissory Note issued by KULR Technology Corporation, dated June 8, 2017 (1)
     
10.8   Consulting Agreement, dated March 15, 2018 (7)
     
10.9   2018 KULR Technology Group Equity Incentive Plan (12)
     
10.10   Securities Purchase Agreement dated April 2, 2019 (13)
     
10.11   Subscription Agreement, as supplemented, for Common Stock Offering (14)
     
10.12   Rescission and Termination Agreement dated July 5, 2019 (15)
     
10.13   Form of Subscription Agreement (16)
     
10.14   Form of Warrant (16)
     
10.15   Standby Equity Distribution Agreement dated February 27, 2020 (17)
     
10.16   Note Purchase Agreement dated February 27, 2020 (17)
     
10.17   Promissory Note dated February 27, 2020 (17)
     
21.1   List of Subsidiaries (3)
     
23.1   Consent of Marcum LLP*
     
31.1   Certification pursuant to 18 U.S.C. Section 1350 as adopted pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.*
     
31.2   Certification pursuant to 18 U.S.C. Section 1350 as adopted pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.*
     
32.1   Certification pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.*
     
101.INS   XBRL Instance*
     
101.SCH   XBRL Taxonomy Extension Schema*
     
101.CAL   XBRL Taxonomy Extension Calculation*
     
101.DEF   XBRL Taxonomy Extension Definition*
     
101.LAB   XBRL Taxonomy Extension Labels*
     
101.PRE   XBRL Taxonomy Extension Presentation*

 

* Filed herewith.

 

28

 

 

(1) Previously filed as an exhibit to Form 8-K on June 12, 2017 and incorporated herein by this reference.
   
(2) Previously filed as an exhibit on Form 10-12G on January 7, 2016 (File No.: 000-55564) and incorporated herein by this reference.
   
(3) Previously filed as an exhibit to Form 8-K on June 19, 2017 and incorporated herein by this reference.
   
(4) Previously filed on Form S-1 on June 28, 2016 (File No.: 333-212272) and incorporated herein by this reference.
   
(5) Previously filed as an exhibit to Form 8-K on November 3, 2016 and incorporated herein by this reference.
   
(6) Previously filed as an exhibit to Form 8-K on April 5, 2017 and incorporated herein by this reference.
   
(7)  Previously filed as an exhibit to Form 8-K on March 15, 2018 and incorporated herein by this reference.
   
(8)  Previously filed as an exhibit to Form 8-K on August 30, 2018 and incorporated herein by this reference.
   
(9) Previously filed as an exhibit to Form 8-K on December 6, 2018 and incorporated herein by this reference.
   
(10) Previously filed as an exhibit to Form 8-K on January 7, 2019 and incorporated herein by this reference.
   
(11)

Previously filed as an exhibit to Form 8-K on August 23, 2019 and incorporated herein by this reference.

   
(12) Previously filed as an exhibit to Form S-8 on October 9, 2018 and incorporated herein by this reference.
   
(13) Previously filed as an exhibit to Form 8-K on April 3, 2019 and incorporated herein by this reference.
   
(14) Previously filed as an exhibit to Form 10-Q on May 14, 2019 and incorporated herein by this reference.
   
(15) Previously filed as an exhibit to Form 8-K on July 5, 2019 and incorporated herein by this reference.
   
(16) Previously filed as an exhibit to Form 8-K on December 5, 2019 and incorporated herein by this reference.
   
(17) Previously filed as an exhibit to Form 8-K on March 4, 2020 and incorporated herein by this reference.

 

 

ITEM 16. FORM 10-K SUMMARY

 

None.

 

29

 

 

SIGNATURES

 

Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.

 

May 14, 2020

KULR Technology Group, Inc.
     
  By:   /s/ Michael Mo
    Michael Mo
    Chief Executive Officer and Chairman
(Principal Executive Officer)
     
  By:   /s/ Simon Westbrook
    Simon Westbrook
   

Chief Financial Officer

(Principal Financial and Accounting Officer)

 

Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the registrant and in the capacities and on the dates indicated.

 

Signature   Title   Date
           
By: /s/ Michael Mo   Chief Executive Officer and Chairman  

May 14, 2020

  Michael Mo        
           
By: /s/ Timothy Knowles   Chief Technical Officer and Director  

May 14, 2020

  Timothy Knowles        
           
By: /s/ Simon Westbrook   Chief Financial Officer  

May 14, 2020

  Simon Westbrook        

 

30

 

 

KULR TECHNOLOGY GROUP, INC. AND SUBSIDIARY

 

INDEX TO CONSOLIDATED FINANCIAL STATEMENTS

 

Report of Independent Registered Public Accounting Firm F-2
   
Consolidated Balance Sheets as of December 31, 2019 and 2018 F-3
   
Consolidated Statements of Operations for the Years Ended December 31, 2019 and 2018 F-4
   
Consolidated Statements of Changes in Stockholders’ Deficiency for the Years Ended December 31, 2019 and 2018 F-5
   
Consolidated Statements of Cash Flows for the Years Ended December 31, 2019 and 2018 F-6
   
Notes to Consolidated Financial Statements F-8

 

F-1

 

 

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

  

To the Shareholders and Board of Directors of

KULR Technology Group Inc.

 

Opinion on the Financial Statements

 

We have audited the accompanying consolidated balance sheets of KULR Technology Group, Inc. and Subsidiary (the “Company”) as of December 31, 2019 and 2018, the related consolidated statements of operations, changes in stockholders’ deficiency and cash flows for each of the two years in the period ended December 31, 2019, and the related notes (collectively referred to as the “financial statements”). In our opinion, the financial statements present fairly, in all material respects, the financial position of the Company as of December 31, 2019 and 2018, and the results of its operations and its cash flows for each of the two years in the period ended December 31, 2019, in conformity with accounting principles generally accepted in the United States of America.

 

Explanatory Paragraph – Going Concern

 

The accompanying financial statements have been prepared assuming that the Company will continue as a going concern. As more fully described in Note 2, the Company has a working capital deficiency, has incurred significant losses and needs to raise additional funds to meet its obligations and sustain its operations. These conditions raise substantial doubt about the Company's ability to continue as a going concern. Management's plans in regard to these matters are also described in Note 2. The financial statements do not include any adjustments that might result from the outcome of this uncertainty.

 

Basis for Opinion

 

These financial statements are the responsibility of the Company's management. Our responsibility is to express an opinion on the Company's financial statements based on our audits. We are a public accounting firm registered with the Public Company Accounting Oversight Board (United States) ("PCAOB") and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.

 

We conducted our audits in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audits to obtain reasonable assurance about whether the financial statements are free of material misstatement, whether due to error or fraud. The Company is not required to have, nor were we engaged to perform, an audit of its internal control over financial reporting. As part of our audits we are required to obtain an understanding of internal control over financial reporting but not for the purpose of expressing an opinion on the effectiveness of the Company's internal control over financial reporting. Accordingly, we express no such opinion.

 

Our audits included performing procedures to assess the risks of material misstatement of the financial statements, whether due to error or fraud, and performing procedures that respond to those risks. Such procedures included examining, on a test basis, evidence regarding the amounts and disclosures in the financial statements. Our audits also included evaluating the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the financial statements. We believe that our audits provide a reasonable basis for our opinion.

 

/s/ Marcum llp

 

Marcum llp

 

We have served as the Company’s auditor since 2018.

 

New York, NY

May 14, 2020

 

F-2

 

 

KULR TECHNOLOGY GROUP, INC. AND SUBSIDIARY

CONSOLIDATED BALANCE SHEETS

 

    December 31,  
    2019     2018  
Assets                
                 
Current Assets:                
Cash   $ 108,857     $ 229,896  
Accounts receivable     30,101       112,224  
Inventory     27,091       9,594  
Prepaid expenses     23,825       27,033  
Other current assets     19,376       27,569  
Total Current Assets     209,250       406,316  
Property and equipment, net     27,516       44,791  
Total Assets   $ 236,766     $ 451,107  
                 
Liabilities and Stockholders' Deficiency                
                 
Current Liabilities:                
Accounts payable   $ 348,913     $ 117,995  
Accrued expenses and other current liabilities     659,399       374,330  
Accrued expenses and other current liabilities - related party     10,419       83,919  
Deferred revenue     15,000       -  
Total Current Liabilities     1,033,731       576,244  
                 
Commitments and contingencies (See Note 10)     -       -  
                 
Stockholders' Deficiency:                
Preferred stock, $0.0001 par value, 20,000,000 shares authorized;                
Series A Preferred Stock, 1,000,000 shares designated; none issued and outstanding at December 31, 2019 and 2018     -       -  
Series B Convertible Preferred Stock, 31,000 shares designated; 14,487 and 30,858 shares issued and outstanding at December 31, 2019 and 2018, respectively; liquidation preference of $14,487 and $30,858 at December 31, 2019 and 2018, respectively     1       3  
Series C Preferred Stock, 400 shares designated; 24.01 and 0 shares issued and outstanding at December 31, 2019 and 2018, respectively; liquidation preference of $240,100 and $0 at December 31, 2019 and 2018, respectively     -       -  
Common stock, $0.0001 par value, 500,000,000 shares authorized; 81,071,831 and 78,706,256 shares issued and outstanding at December 31, 2019 and 2018, respectively     8,107       7,871  
Additional paid-in capital     7,591,239       6,283,548  
Accumulated deficit     (8,396,312 )     (6,416,559 )
                 
Total Stockholders' Deficiency     (796,965 )     (125,137 )
Total Liabilities and Stockholders' Deficiency   $ 236,766     $ 451,107  

 

The accompanying notes are an integral part of these consolidated financial statements.

 

F-3

 

 

KULR TECHNOLOGY GROUP, INC. AND SUBSIDIARY

CONSOLIDATED STATEMENTS OF OPERATIONS

 

    For the Years Ended  
    December 31,  
    2019     2018  
Revenue   $ 830,398     $ 1,274,028  
                 
Cost of revenue     226,505       336,654  
Gross Profit     603,893       937,374  
                 
Operating Expenses:                
Research and development     502,225       508,144  
Selling, general and administrative     2,080,941       2,510,818  
Total Operating Expenses     2,583,166       3,018,962  
Loss From Operations     (1,979,273 )     (2,081,588 )
                 
Other (Expense) Income:                
Interest expense, net     (1,580 )     (826 )
Other income     1,100       -  
Change in fair value of accrued issuable equity     -       24,175  
Total Other (Expense) Income     (480 )     23,349  
Net Loss   $ (1,979,753 )   $ (2,058,239 )
                 
Net Loss Per Share                
- Basic and Diluted   $ (0.02 )   $ (0.03 )
                 
Weighted Average Number of Common Shares Outstanding                
- Basic and Diluted     80,123,111       77,642,101  

 

The accompanying notes are an integral part of these consolidated financial statements.

 

F-4

 

 

KULR TECHNOLOGY GROUP, INC. AND SUBSIDIARY

CONSOLIDATED STATEMENTS OF CHANGES IN STOCKHOLDERS’ DEFICIENCY

FOR THE YEARS ENDED DECEMBER 31, 2019 AND 2018

 

                                                    Total  
    Series B Convertible     Series C Convertible                 Additional           Stockholders'  
    Preferred Stock     Preferred Stock     Common Stock     Paid-In     Accumulated     Equity  
    Shares     Amount     Shares     Amount     Shares     Amount     Capital     Deficit     (Deficiency)  
Balance - January 1, 2018     -     $ -       -     $ -       77,440,000     $ 7,744     $ 5,090,282     $ (4,358,320 )   $ 739,706  
                                                                         
Stock-based compensation     -       -       -       -       184,437       19       440,119       -       440,138  
                                                                         
Common stock issued for cash, net of                                                                        
  issuance costs [1]     -       -       -       -       1,081,819       108       672,292       -       672,400  
                                                                         
Series B Convertible Preferred Stock issued                                                                        
  to common stockholders (See Note 9)     30,858       3       -       -       -       -       1,018,311       -       1,018,314  
                                                                         
Series B Convertible Preferred Stock issued as                                                                        
  deemed dividend to common stockholders                                                                        
  (See Note 9)     -       -       -       -       -       -       (987,456 )     -       (987,456 )
                                                                         
Forgiveness of accrued expenses by                                                                        
  related party     -       -       -       -       -       -       50,000       -       50,000  
                                                                         
Net loss     -       -       -       -       -       -       -       (2,058,239 )     (2,058,239 )
                                                                         
Balance - December 31, 2018     30,858     $ 3       -     $ -       78,706,256     $ 7,871     $ 6,283,548     $ (6,416,559 )   $ (125,137 )
                                                                         
Stock-based compensation     -       -       -       -       185,966       19       220,606       -       220,625  
                                                                         
Common stock issued for cash     -       -       -       -       1,361,059       135       898,165       -       898,300  
                                                                         
Common stock issued upon conversion of                                                                        
   Series B Convertible Preferred Stock     (16,371 )     (2 )     -       -       818,550       82       (80 )     -       -  
                                                                         
Series C Convertible Preferred Stock and                                                                        
  warrants issued for cash, net of issuance                                                                        
  costs [2]     -       -       24.01       -       -       -       154,000       -       154,000  
                                                                         
Forgiveness of accrued expenses by                                                                        
  related party     -       -       -       -       -       -       35,000       -       35,000  
                                                                         
Net loss     -       -       -       -       -       -       -       (1,979,753 )     (1,979,753 )
                                                                         
Balance - December 31, 2019     14,487     $ 1       24.01     $ -       81,071,831     $ 8,107     $ 7,591,239     $ (8,396,312 )   $ (796,965 )

 

[1]  Includes gross proceeds of $714,000, less issuance costs of $41,600 ($35,000 of cash and $6,600 of non-cash).

 

[2]  Includes gross proceeds of $216,000, less cash issuance costs of $62,000.

 

The accompanying notes are an integral part of these consolidated financial statements.      

 

F-5

 

 

KULR TECHNOLOGY GROUP, INC. AND SUBSIDIARY

CONSOLIDATED STATEMENTS OF CASH FLOWS

 

    For the Years Ended  
    December 31,  
    2019     2018  
Cash Flows From Operating Activities:                
Net loss   $ (1,979,753 )   $ (2,058,239 )
Adjustments to reconcile net loss to net cash used in operating activities:                
Depreciation expense     17,275       15,311  
Write-down of inventory     90       -  
Change in fair value of accrued issuable equity     -       (24,175 )
Stock-based compensation     220,625       457,713  
Lower of cost or net realizable value adjustment     -       4,173  
Changes in operating assets and liabilities:                
Accounts receivable     82,123       39,578  
Inventory     (17,587 )     -  
Prepaid expenses     3,208       79,433  
Other current assets     8,193       (10,692 )
Accounts payable     230,918       80,971  
Accrued expenses and other current liabilities     270,069       185,388  
Accrued expenses and other current liabilities - related party     (38,500 )     (120,425 )
Deferred revenue     15,000       -  
Security deposit     -       (8,150 )
                 
Total Adjustments     791,414       699,125  
                 
Net Cash Used In Operating Activities     (1,188,339 )     (1,359,114 )
                 
Cash Flows From Investing Activities:                
Purchases of property and equipment     -       (16,609 )
                 
Net Cash Used In Investing Activities     -       (16,609 )
                 
Cash Flows from Financing Activities:                
Proceeds from issuance of Series B Convertible Preferred Stock     -       30,858  
Proceeds from sale of Series C Convertible Preferred Stock and warrants [1]     184,000       -  
Proceeds from sale of common stock [2]     898,300       679,000  
Payment of offering costs     (15,000 )     -  
                 
Net Cash Provided By Financing Activities     1,067,300       709,858  
                 
Net Decrease In Cash     (121,039 )     (665,865 )
                 
Cash - Beginning of Year     229,896       895,761  
                 
Cash - End of Year   $ 108,857     $ 229,896  

 

[1] Includes gross proceeds of $216,000, less withheld cash issuance costs of $32,000.
[2] Includes gross proceeds of $714,000, less withheld cash issuance costs of $35,000 for the year ended December 31, 2018.  There were no issuance costs for the year ended December 31, 2019.

 

The accompanying notes are an integral part of these consolidated financial statements.

 

F-6

 

 

KULR TECHNOLOGY GROUP, INC. AND SUBSIDIARY

CONSOLIDATED STATEMENTS OF CASH FLOWS - CONTINUED

 

    For the Years Ended  
    December 31,  
    2019     2018  
Supplemental Disclosures of Cash Flow Information:                
Cash paid during the period for:                
Interest   $ 789     $ 888  
Income taxes   $ -     $ 2,400  
                 
Non-cash investing and financing activities:                
Common stock equity offering issuance costs   $ -     $ 6,600  
Accrual of offering costs   $ 15,000     $ -  
Series B Convertible Preferred Stock issued as deemed dividend to common stockholders   $ -     $ 987,456  
Common stock issued upon conversion of Series B Convertible Preferred Stock   $ 82     $ -  
Forgiveness of accrued expenses by related party   $ 35,000     $ 50,000  

 

The accompanying notes are an integral part of these consolidated financial statements.

 

F-7

 

 

KULR TECHNOLOGY GROUP, INC. AND SUBSIDIARY

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

FOR THE YEARS ENDED DECEMBER 31, 2019 AND 2018

 

NOTE 1 BUSINESS ORGANIZATION AND NATURE OF OPERATIONS

 

Organization and Operations

 

KULR Technology Group, Inc. was incorporated on December 11, 2015 under the laws of the State of Delaware as KT High-Tech Marketing, Inc. Effective August 30, 2018, KT High-Tech Marketing, Inc. changed its name to KULR Technology Group, Inc.

 

KULR Technology Group, Inc., through its wholly-owned subsidiary, KULR Technology Corporation (collectively referred to as “KULR” or the “Company”), develops and commercializes high-performance thermal management technologies for electronics, batteries, and other components across a range of applications. Currently, the Company is focused on targeting the following applications: electric vehicles and autonomous driving systems (collectively referred to herein as “E-Mobility”), artificial intelligence and Cloud computing, energy storage and 5G communication technologies. KULR provides heat management solutions to enhance the performance and safety of battery packs used in electric vehicles, communication devices, and aerospace and defense applications.

 

NOTE 2 GOING CONCERN AND MANAGEMENT’S PLANS

 

 

The Company has not yet achieved profitability and expects to continue to incur cash outflows from operations. It is expected that its research and development and general and administrative expenses will continue to increase and, as a result, the Company will eventually need to generate significant product revenues to achieve profitability. These conditions indicate that there is substantial doubt about the Company’s ability to continue as a going concern within one year after the financial statement issuance date.

 

The Company is currently funding its operations on a month-to-month basis and the Company’s management believes that it has access to capital resources to fund ongoing operations. In February 2020, the Company negotiated an equity line of credit for up to $8,000,000 million of which $1,500,000 was immediately drawn down to fund payment of liabilities and provide working capital, and an additional $10,000 was drawn in April 2020. Additionally, the Company applied for, and in April 2020, received a loan of $155,000 under the government Small Business Administration (“SBA”) sponsored Payroll Protection Program (“PPP”) to support continuing employment during the COVID-19 pandemic. Even so, there is no assurance that the Company will be able to continue to obtain funds on commercially acceptable terms, if at all. If the Company is unable to obtain adequate funds on reasonable terms, it may be required to significantly curtail or discontinue operations or obtain funds by entering into financing agreements on unattractive terms. The Company’s operating needs include the planned costs to operate its business, including amounts required to fund working capital and capital expenditures.

 

The accompanying consolidated financial statements have been prepared in conformity with accounting principles generally accepted in the United States of America (“U.S. GAAP”), which contemplate continuation of the Company as a going concern and the realization of assets and satisfaction of liabilities in the normal course of business. The consolidated financial statements do not include any adjustment that might become necessary should the Company be unable to continue as a going concern.

 

NOTE 3 SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES

 

Principles of Consolidation

 

The consolidated financial statements of the Company include the accounts of KULR Technology Group, Inc. and its wholly-owned subsidiary, KULR Technology Corporation. All intercompany transactions have been eliminated in the consolidation.

 

Use of Estimates 

 

Preparation of financial statements in conformity with U.S. GAAP requires management to make estimates, judgments and assumptions that affect the reported amounts of assets, liabilities, revenues and expenses, together with amounts disclosed in the related notes to the financial statements. The Company’s significant estimates used in these financial statements include, but are not limited to, fair value calculations for equity securities, stock-based compensation, the collectability of receivables, inventory valuations, the recoverability and useful lives of long-lived assets, and the valuation allowance related to the Company’s deferred tax assets. Certain of the Company’s estimates could be affected by external conditions, including those unique to the Company and general economic conditions. It is possible that these external factors could have an effect on the Company’s estimates and could cause actual results to differ from those estimates.

 

See Note 3 – Summary of Significant Accounting Policies, Stock-Based Compensation for additional discussion of the use of estimates in estimating the fair value of the Company’s common stock.

 

F-8

 

 

KULR TECHNOLOGY GROUP, INC. AND SUBSIDIARY

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

FOR THE YEARS ENDED DECEMBER 31, 2019 AND 2018

 

NOTE 3 SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES – CONTINUED

 

Concentrations of Credit Risk

 

The Company maintains cash with major financial institutions. Cash held in U.S. bank institutions is currently insured by the Federal Deposit Insurance Corporation (“FDIC”) up to $250,000 at each institution. There were no uninsured cash balances as of December 31, 2019 and 2018, respectively.

 

Customer concentrations are as follows:

 

    Revenues     Accounts Receivable  
    For the Years Ended        
    December 31,     As of December 31,  
    2019     2018     2019     2018  
Customer A     43 %     66 %     *       63 %
Customer B     *       13 %     *       *  
Customer C     *       *       *       37 %
Customer D     14 %     *       *       *  
Customer E     *       *       20 %     *  
Customer F     *       *       19 %     *  
Customer G     *       *       33 %     *  
Customer H     *       *       17 %     *  
Customer I     12 %     *       *       *  
Total     69 %     79 %     89 %     100 %
* Less than 10%                                

 

There is no assurance the Company will continue to receive significant revenues from any of these customers. Any reduction or delay in operating activity from any of the Company’s significant customers, or a delay or default in payment by any significant customer, or termination of agreements with significant customers, could materially harm the Company’s business and prospects. As a result of the Company’s significant customer concentrations, its gross profit and results from operations could fluctuate significantly due to changes in political, environmental, or economic conditions, or the loss of, reduction of business from, or less favorable terms with any of the Company’s significant customers.

 

Vendor concentrations are as follows:

 

    As of December 31,  
    2019     2018  
             
Vendor A     15 %     13 %
Vendor B     16 %     15 %
Vendor C     17 %     35 %
Vendor D     12 %     *  
Total     60 %     62 %

* Less than 10%

 

Accounts Receivable

 

Accounts receivable are carried at their contractual amounts, less an estimate for uncollectible amounts. As of December 31, 2019 and 2018, no allowances for uncollectable amounts were determined to be necessary. Management estimates the allowance for bad debts based on existing economic conditions, the financial conditions of the customers, and the amount and age of past due accounts. Receivables are considered past due if full payment is not received by the contractual due date. Past due accounts are generally written off against the allowance for bad debts only after all collection attempts have been exhausted.

 

Inventory

 

Inventory is comprised of carbon fiber thermal interface solutions and internal short circuit batteries, which are available for sale. Inventories are stated at the lower of cost or net realizable value. Cost is determined by the first-in, first-out method. The cost of inventory that is sold to third parties is included within cost of sales and the cost of inventory that is given as samples is included within operating expenses. The Company periodically reviews for slow-moving, excess or obsolete inventories. Products that are determined to be obsolete, if any, are written down to net realizable value. As of December 31, 2019 and 2018, the Company’s inventory was comprised solely of finished goods.

 

F-9

 

 

KULR TECHNOLOGY GROUP, INC. AND SUBSIDIARY

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

FOR THE YEARS ENDED DECEMBER 31, 2019 AND 2018

 

NOTE 3 SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES – CONTINUED

 

Property and Equipment

 

Property and equipment are stated at cost, net of accumulated depreciation which is recorded commencing at the in-service date using the straight-line method at rates sufficient to charge the cost of depreciable assets to operations over their estimated useful lives, which range from 3 to 7 years. Leasehold improvements are amortized over the lesser of (a) the useful life of the asset; or (b) the remaining lease term. Maintenance and repairs are charged to operations as incurred. The Company capitalizes cost attributable to the betterment of property and equipment when such betterment extends the useful life of the assets.

 

The Company reviews for the impairment of long-lived assets annually and whenever events or changes in circumstances indicate that the carrying amount of an asset may not be recoverable. An impairment loss would be recognized when the present value of estimated future cash flows expected to result from the use of the asset and its eventual disposition is less than its carrying value.

 

Fair Value of Financial Instruments

 

The Company measures the fair value of financial assets and liabilities based on the guidance of Accounting Standards Codification (“ASC”) 820 “Fair Value Measurements and Disclosures” (“ASC 820”) which defines fair value, establishes a framework for measuring fair value, and expands disclosures about fair value measurements.

 

ASC 820 defines fair value as the exchange price that would be received for an asset or paid to transfer a liability (an exit price) in the principal or most advantageous market for the asset or liability in an orderly transaction between market participants on the measurement date. ASC 820 also establishes a fair value hierarchy, which requires an entity to maximize the use of observable inputs and minimize the use of unobservable inputs when measuring fair value. ASC 820 describes three levels of inputs that may be used to measure fair value:

 

Level 1 — quoted prices in active markets for identical assets or liabilities

 

Level 2 — quoted prices for similar assets and liabilities in active markets or inputs that are observable

 

Level 3 — inputs that are unobservable (for example, cash flow modeling inputs based on assumptions)

 

The carrying amounts of the Company’s financial instruments, such as cash, accounts receivable and accrued expenses and other current liabilities approximate fair values due to the short-term nature of these instruments.

 

Preferred Stock

 

The Company applies the accounting standards for distinguishing liabilities from equity when determining the classification and measurement of its preferred stock. Preferred shares subject to mandatory redemption are classified as liability instruments and are measured at fair value. Conditionally redeemable preferred shares (including preferred shares that feature redemption rights that are either within the control of the holder or subject to redemption upon the occurrence of uncertain events not solely within the Company’s control) are classified as temporary equity. At all other times, preferred shares are classified as stockholders’ equity. 

 

During the year ended December 31, 2018, the Company obtained a third-party valuation of its Series B Convertible Preferred Stock, which was considered in management’s estimation of the value of the equity instruments issued during that period. Based on the valuation, it was determined the Company’s Series B Convertible Preferred Stock had a fair value of $33.00 per share.

 

F-10

 

 

KULR TECHNOLOGY GROUP, INC. AND SUBSIDIARY

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

FOR THE YEARS ENDED DECEMBER 31, 2019 AND 2018

 

NOTE 3 SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES – CONTINUED

 

Convertible Instruments

 

The Company evaluates its convertible instruments to determine if those contracts or embedded components of those contracts qualify as derivative financial instruments to be separately accounted for in accordance with Topic 815 of the Financial Accounting Standards Board (“FASB”) ASC. The accounting treatment of derivative financial instruments requires that the Company record embedded conversion options and any related freestanding instruments at their fair values as of the inception date of the agreement and at fair value as of each subsequent balance sheet date. Any change in fair value is recorded as non-operating, non-cash income or expense for each reporting period at each balance sheet date. The Company reassesses the classification of its derivative instruments at each balance sheet date. If the classification changes as a result of events during the period, the contract is reclassified as of the date of the event that caused the reclassification. Embedded conversion options and any related freestanding instruments are recorded as a discount to the host instrument.

 

If the instrument is determined not to be a derivative liability, the Company then evaluates for the existence of a beneficial conversion feature by comparing the market price of the Company’s common stock as of the commitment date to the effective conversion price of the instrument.

 

Offering Costs

 

Deferred offering costs, which primarily consist of direct, incremental professional fees incurred in connection with a debt or equity financing, are capitalized as non-current assets on the balance sheet. Once the financing closes, the Company reclassifies such costs as either discounts to notes payable or as a reduction of proceeds received from equity transactions so that such costs are recorded as a reduction of additional paid-in capital. If the completion of a contemplated financing was deemed to be no longer probable, the related deferred offering costs would be charged to general and administrative expense in the consolidated financial statements.

 

Revenue Recognition

 

On January 1, 2018, the Company adopted ASC Topic 606, “Revenue from Contracts with Customers” (“ASC 606”). The core principle of ASC 606 requires that an entity recognize revenue to depict the transfer of promised goods or services to customers in an amount that reflects the consideration to which the company expects to be entitled in exchange for those goods or services. ASC 606 defines a five-step process to achieve this core principle and, in doing so, it is possible more judgment and estimates may be required within the revenue recognition process than required under existing U.S. GAAP including identifying performance obligations in the contract, estimating the amount of variable consideration to include in the transaction price and allocating the transaction price to each separate performance obligation.

 

The following five steps are applied to achieve that core principle:

 

· Step 1: Identify the contract with the customer;

 

· Step 2: Identify the performance obligations in the contract;

 

· Step 3: Determine the transaction price;

 

· Step 4: Allocate the transaction price to the performance obligations in the contract; and

 

· Step 5: Recognize revenue when the company satisfies a performance obligation.

 

The Company adopted ASC 606 for all applicable contracts using the modified retrospective method, which would have required a cumulative-effect adjustment, if any, as of the date of adoption. The adoption of ASC 606 did not have a material impact on the Company's consolidated financial statements as of the date of adoption. As a result, a cumulative-effect adjustment was not required.

 

The Company recognizes revenue primarily from the following different types of contracts:

 

· Product sales – Revenue is recognized at the point the customer obtains controls of the goods and the Company satisfies its performance obligation, which is generally at the time it ships the product to the customer.

 

· Contract services – Revenue is recognized at the point in time that the Company satisfies its performance obligation under the contract, which is generally at the time it delivers a report to the customer.

 

F-11

 

 

KULR TECHNOLOGY GROUP, INC. AND SUBSIDIARY

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

FOR THE YEARS ENDED DECEMBER 31, 2019 AND 2018

 

NOTE 3 SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES – CONTINUED

 

Revenue Recognition – Continued

 

The following table summarizes the disaggregation of our revenue recognized in our consolidated statements of operations:

 

    For the Years Ended  
    December 31,  
    2019     2018  
Product sales   $ 735,431     $ 1,096,040  
Contract services     94,967       177,988  
Total revenue   $ 830,398     $ 1,274,028  

 

As of December 31, 2019 and 2018, the Company had $15,000 and $0 of deferred revenue, respectively, from contracts with customers. The contract liabilities represent payments received from customers for which the Company had not yet satisfied its performance obligation under the contract. The Company expects to satisfy the performance obligation within the next 12 months. During the years ended December 31, 2019, and 2018, $0 of revenue was recognized from performance obligations satisfied (or partially satisfied) in previous periods.

 

Shipping and Handling Costs

 

Shipping and handling costs incurred by the Company as well as fees received by customers for product shipped to customers are included in selling, general and administrative expenses on the consolidated statements of operations. For the years ended December 31, 2019 and 2018, shipping and handling costs amounted to $3,172 and $932, respectively.

 

Research and Development

 

Research and development (“R&D”) include expenses incurred in connection with the R&D of our CFV thermal management solution and non-cash stock-based compensation expenses. Research and development expenses are charged to operations as incurred. During the years ended December 31, 2019 and 2018, the Company incurred $502,225 and $508,144, respectively, of research and development expenses.

 

Advertising Costs

 

Advertising costs are expensed in the period incurred. Advertising costs charged to operations for the years ended December 31, 2019 and 2018 were $49,300 and $12,500, respectively, and are included in selling, general and administrative on the consolidated statements of operations.

 

Stock-Based Compensation

 

The Company measures the cost of services received in exchange for an award of equity instruments based on the fair value of the award. The fair value of the award is measured on the grant date. The fair value amount is then recognized over the period during which services are required to be provided in exchange for the award, usually the vesting period. Upon the exercise of an award, the Company issues new shares of common stock out of its authorized shares.

 

During the year ended December 31, 2018, the Company obtained a third-party valuation of its common stock, which was also considered in management’s estimation of the value of the equity instruments issued during that period. Besides the third-party valuation, it was determined the Company’s common stock had a fair value of $0.66 per share, which was based on a number of factors, such as the examination of the sales of common stock for cash and the convertible preferred stock for cash etc. All of the shares of common stock sold during the year ended December 31, 2019 were sold at $0.66 per share, therefore the value of the equity instruments issued during 2019 was determined using a common stock fair value of $0.66 per share.

 

F-12 

 

 

KULR TECHNOLOGY GROUP, INC. AND SUBSIDIARY

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

FOR THE YEARS ENDED DECEMBER 31, 2019 AND 2018

 

NOTE 3 SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES – CONTINUED

 

Net Loss Per Common Share

 

Basic net loss per common share is computed by dividing net loss by the weighted average number of vested common shares outstanding during the period. Diluted net loss per common share is computed by dividing net loss by the weighted average number of common and dilutive common-equivalent shares outstanding during each period. Dilutive common-equivalent shares consist of shares of non-vested restricted stock, if not anti-dilutive.

 

The following shares were excluded from the calculation of weighted average dilutive common shares because their inclusion would have been anti-dilutive:

 

    For the Years Ended  
    December 31,  
    2019     2018  
Series B Convertible Preferred Stock     724,350       1,542,850  
Series C Convertible Preferred Stock     240,100       -  
Options     385,000       -  
Warrants     210,025       -  
Total     1,559,475       1,542,850  

 

Operating Leases

 

The Company leases properties under operating leases. For leases in effect upon adoption of Accounting Standards Update (“ASU”) 2016-02, “Leases (Topic 842)” at January 1, 2019 and for any leases commencing thereafter, the Company recognizes a liability to make lease payments, the “lease liability”, and an asset representing the right to use the underlying asset during the lease term, the “right-of-use asset”. The lease liability is measured at the present value of the remaining lease payments, discounted at the Company’s incremental borrowing rate. The right-of-use asset is measured at the amount of the lease liability adjusted for the remaining balance of any lease incentives received, any cumulative prepaid or accrued rent if the lease payments are uneven throughout the lease term, any unamortized initial direct costs, and any impairment of the right-of-use-asset. Operating lease expense consists of a single lease cost calculated so that the remaining cost of the lease is allocated over the remaining lease term on a straight-line basis, variable lease payments not included in the lease liability, and any impairment of the right-of-use asset.

 

The Company evaluated their operating lease and elected to apply the short-term lease measurement and recognition exemption in which the right of use asset and lease liability are not recognized for short-term leases. The adoption of this pronouncement did not have a material impact on the Company’s consolidated financial statements.

 

Income Taxes

 

The Company recognizes deferred tax assets and liabilities for the expected future tax consequences of items that have been included or excluded in the financial statements or tax returns. Deferred tax assets and liabilities are determined on the basis of the difference between the tax basis of assets and liabilities and their respective financial reporting amounts (“temporary differences”) at enacted tax rates in effect for the years in which the temporary differences are expected to reverse.

 

The Company utilizes a recognition threshold and measurement process for financial statement recognition and measurement of a tax position taken or expected to be taken in a tax return.

 

Management has evaluated and concluded that there were no material uncertain tax positions requiring recognition in the Company’s financial statements as of December 31, 2019 and 2018. The Company does not expect any significant changes in its unrecognized tax benefits within twelve months of the reporting date.

 

The Company’s policy is to classify assessments, if any, for tax related interest as interest expense and penalties as selling, general and administrative expenses in the consolidated statements of operations.

 

F-13 

 

 

KULR TECHNOLOGY GROUP, INC. AND SUBSIDIARY

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

FOR THE YEARS ENDED DECEMBER 31, 2019 AND 2018

 

NOTE 3 SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES – CONTINUED

 

Subsequent Events

 

The Company has evaluated subsequent events through the date which the consolidated financial statements were issued. Based upon the evaluation, the Company did not identify any recognized or non-recognized subsequent events that would have required adjustment or disclosure in the consolidated financial statements, except as disclosed.

 

Recently Issued Accounting Pronouncements

 

In November 2019, the FASB issued ASU No. 2019-11, Codification Improvements to Topic 326, Financial Instruments – Credit Losses (“ASU 2019-11”). ASU 2019-11 is an accounting pronouncement that amends ASU 2016-13, “Financial Instruments – Credit Losses (Topic 326): Measurement of Credit Losses on Financial Instruments.” The amendments update guidance on reporting credit losses for financial assets. These amendments affect loans, debt securities, trade receivables, net investments in leases, off balance sheet credit exposures, reinsurance receivables, and any other financial assets not excluded from the scope that have the contractual right to receive cash. The amendments in this ASU are effective, as revised by ASU 2019-10, for annual reporting periods beginning after December 15, 2022, as extended, including interim periods within those fiscal years. All entities may adopt the amendments through a cumulative-effect adjustment to retained earnings as of the beginning of the first reporting period in which the guidance is effective (that is, a modified-retrospective approach). The Company is currently evaluating ASU 2019-11 and its impact on its consolidated financial statements and financial statement disclosures.

 

In December 2019, the FASB issued ASU 2019-12, “Income Taxes (Topic 740): Simplifying the Accounting for Income Taxes,” which is intended to simplify various aspects related to accounting for income taxes. ASU 2019-12 removes certain exceptions to the general principles in Topic 740 and also clarifies and amends existing guidance to improve consistent application. ASU 2019-12 is effective for the Company beginning in fiscal years after December 15, 2020 and interim periods within fiscal years beginning after December 15, 2021. The Company is currently assessing the impact that this pronouncement will have on its consolidated financial statements.

  

F-14 

 

 

KULR TECHNOLOGY GROUP, INC. AND SUBSIDIARY

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

FOR THE YEARS ENDED DECEMBER 31, 2019 AND 2018

 

NOTE 3 SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES – CONTINUED

 

Recent Adopted Accounting Pronouncements

 

In February 2016, the FASB issued Accounting Standards Update (“ASU”) 2016-02, "Leases (Topic 842)." ASU 2016-02 requires that a lessee recognize the assets and liabilities that arise from operating leases. A lessee should recognize in the statement of financial position a liability to make lease payments (the lease liability) and a right-of-use asset representing its right to use the underlying asset for the lease term. For leases with a term of 12 months or less, a lessee is permitted to make an accounting policy election by class of underlying asset not to recognize lease assets and lease liabilities. In transition, lessees and lessors are required to recognize and measure leases at the beginning of the earliest period presented using a modified retrospective approach. This amendment will be effective for fiscal years beginning after December 15, 2018, including interim periods within those fiscal years. The FASB issued ASU No. 2018-10 “Codification Improvements to Topic 842, Leases” and ASU No. 2018-11 “Leases (Topic 842) Targeted Improvements" in July 2018, and ASU No. 2018-20 "Leases (Topic 842) - Narrow Scope Improvements for Lessors" in December 2018. ASU 2018-10 and ASU 2018-20 provide certain amendments that affect narrow aspects of the guidance issued in ASU 2016-02. ASU 2018-11 allows all entities adopting ASU 2016-02 to choose an additional (and optional) transition method of adoption, under which an entity initially applies the new leases standard at the adoption date and recognizes a cumulative-effect adjustment to the opening balance of retained earnings in the period of adoption. The Company adopted ASU 2016-02 effective January 1, 2019 and the adoption did not have a significant impact on the consolidated financial statements.

 

In July 2017, the FASB issued ASU No. 2017-11, “Earnings Per Share (Topic 260) and Derivatives and Hedging (Topic 815) — Accounting for Certain Financial Instruments with Down Round Features,” (“ASU 2017-11”). Equity-linked instruments, such as warrants and convertible instruments may contain down round features that result in the strike price being reduced on the basis of the pricing of future equity offerings. Under ASU 2017-11, a down round feature will no longer require a freestanding equity-linked instrument (or embedded conversion option) to be classified as a liability that is remeasured at fair value through the income statement (i.e. marked-to-market). However, other features of the equity-linked instrument (or embedded conversion option) must still be evaluated to determine whether liability or equity classification is appropriate. Equity classified instruments are not marked-to-market. For earnings per share (“EPS”) reporting, the ASU requires companies to recognize the effect of the down round feature only when it is triggered by treating it as a dividend and as a reduction of income available to common shareholders in basic EPS. The amendments in this ASU are effective for all entities for fiscal years, and interim periods within those fiscal years, beginning after December 15, 2018. Early adoption is permitted, including adoption in any interim period. The Company adopted ASU 2017-11 effective January 1, 2019 and its adoption did not have a material impact on the Company’s consolidated financial statements.

 

In July 2018, the FASB issued ASU No. 2018-09, “Codification Improvements” (“ASU 2018-09”). These amendments provide clarifications and corrections to certain ASC subtopics including the following: Income Statement - Reporting Comprehensive Income – Overall (Topic 220-10), Debt - Modifications and Extinguishments (Topic 470-50), Distinguishing Liabilities from Equity – Overall (Topic 480-10), Compensation - Stock Compensation - Income Taxes (Topic 718-740), Business Combinations - Income Taxes (Topic 805-740), Derivatives and Hedging – Overall (Topic 815-10), and Fair Value Measurement – Overall (Topic 820-10). The majority of the amendments in ASU 2018-09 will be effective in annual periods beginning after December 15, 2018. The Company adopted ASU 2018-09 effective January 1, 2019 and its adoption did not have a material impact on the Company’s consolidated financial statements.

 

In August 2018, the FASB issued ASU No. 2018-13, “Fair Value Measurement (Topic 820): Disclosure Framework—Changes to the Disclosure Requirements for Fair Value Measurement (“ASU 2018-13”). The amendments in ASU 2018-13 modify the disclosure requirements on fair value measurements based on the concepts in the Concepts Statement, including the consideration of costs and benefits. The amendments on changes in unrealized gains and losses, the range and weighted average of significant unobservable inputs used to develop Level 3 fair value measurements, and the narrative description of measurement uncertainty should be applied prospectively for only the most recent interim or annual period presented in the initial fiscal year of adoption. All other amendments should be applied retrospectively to all periods presented upon their effective date. The amendments are effective for all entities for fiscal years beginning after December 15, 2019, and interim periods within those fiscal years. Early adoption is permitted, including adoption in an interim period. The Company adopted ASU 2018-13 effective January 1, 2019 and its adoption did not have a material impact on the Company’s consolidated financial statements.

 

In November 2018, the FASB issued Accounting Standards Update No. 2018-18, Collaborative Arrangements (Topic 808): Clarifying the Interaction between Topic 808 and Topic 606 (“ASU 2018-18”), which clarifies that certain transactions between participants in a collaborative arrangement should be accounted for under ASC 606 when the counterparty is a customer. In addition, ASU 2018-18 precludes an entity from presenting consideration from a transaction in a collaborative arrangement as revenue from contracts with customers if the counterparty is not a customer for that transaction. For public business entities, the amendments in this update are effective for fiscal years beginning after December 15, 2019, and interim periods within those fiscal years. For all other entities, the amendments are effective for fiscal years beginning after December 15, 2020, and interim periods within fiscal years beginning after December 15, 2021. Early adoption is permitted, including adoption in any interim period, (1) for public business entities for periods for which financial 3 statements have not yet been issued and (2) for all other entities for periods for which financial statements have not yet been made available for issuance. The Company adopted ASU 2018-18 effective January 1, 2020 and its adoption is not expected to have a material impact on the Company’s consolidated financial statements and related disclosures.

  

NOTE 4 PREPAID EXPENSES

 

As of December 31, 2019 and 2018, prepaid expenses consisted of the following:

 

    December 31,  
    2019     2018  
Filing fees   $ 11,625     $ 8,750  
Insurance     8,026       8,177  
Research and development services     1,812       7,500  
Other     2,362       2,606  
Total prepaid expenses   $ 23,825     $ 27,033  

 

F-15 

 

 

KULR TECHNOLOGY GROUP, INC. AND SUBSIDIARY

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

FOR THE YEARS ENDED DECEMBER 31, 2019 AND 2018

 

NOTE 5 PROPERTY AND EQUIPMENT

 

As of December 31, 2019 and 2018, property and equipment consisted of the following:

 

    December 31,      
    2019     2018     Estimated Useful Life
Computer equipment   $ 13,356     $ 13,356     3 years
Leasehold improvement     8,834       8,834     15 years or the remaining life of the lease
Software     5,656       5,656     3 years
Machinery and equipment     26,304       26,304     5 - 7 years
Research and development equipment     12,810       12,810     3 years
Furniture and fixtures     3,307       3,306     5 years
      70,266       70,266      
Less: accumulated depreciation     (42,750 )     (25,475 )    
Property and equipment; net   $ 27,516     $ 44,791      

 

Depreciation expense amounted to $17,275 and $15,311 for the years ended December 31, 2019 and 2018, respectively, which is included in selling, general and administrative expenses in the consolidated statements of operations.

 

NOTE 6 ACCRUED EXPENSES AND OTHER CURRENT LIABILITIES

 

As of December 31, 2019 and 2018, accrued expenses and other current liabilities consisted of the following:

 

    December 31,  
    2019     2018  
             
Payroll and vacation   $ 525,917     $ 252,043  
Travel expenses     45,707       48,248  
Legal and professional fees     60,000       47,502  
Payroll and income tax payable     9,670       12,678  
Customer refund     6,843       -  
Credit card payable     4,581       4,586  
Research and development expenses     3,790       2,850  
Insurance     2,133       -  
Issuable equity     -       3,960  
Rent     176       176  
Other     582       2,287  
Total accrued expenses and other current liabilities   $ 659,399     $ 374,330  

 

F-16 

 

 

KULR TECHNOLOGY GROUP, INC. AND SUBSIDIARY

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

FOR THE YEARS ENDED DECEMBER 31, 2019 AND 2018

 

NOTE 7 RELATED PARTY TRANSACTIONS

 

Accrued Expenses and Other Current Liabilities

 

Accrued expenses and other current liabilities – related party consists of a liability of $10,419 and $83,919 as of December 31, 2019 and 2018, respectively, to Energy Science Laboratories, Inc. (“ESLI”), a company controlled by the Company’s Chief Technology Officer (“CTO”), in connection with consulting services provided by ESLI to the Company associated with the development of the Company’s CFV thermal management solutions.

 

As of December 30, 2018, ESLI forgave $50,000 of previously accrued consulting fees that were due to them by the Company.

 

On September 30, 2019, ESLI agreed to forgive $35,000 of previously accrued consulting fees. As a result, the Company accounted for the forgiveness as a capital contribution by reducing accrued expenses and other current liabilities by $35,000 with a corresponding credit to additional paid-in capital.

 

NOTE 8 INCOME TAXES

 

The income tax provision for the years ended December 31, 2019 and 2018 consists of the following:

 

    For The Years Ended  
    December 31,  
    2019     2018  
Federal:                
Current   $ -     $ -  
Deferred     (418,667 )     (347,767 )
                 
State and local:                
Current     -       -  
Deferred     (75,967 )     (121,933 )
      (494,634 )     (469,700 )
Change in valuation allowance     494,634       469,700  
Income tax provision   $ -     $ -  

  

A reconciliation of the statutory federal income tax rate to the Company’s effective tax rate is as follows:

 

    For The Years Ended  
    December 31,  
    2019     2018  
Tax benefit at federal statutory rate     (21.0 )%     (21.0 )%
State income taxes, net of federal benefit     (6.0 )%     (6.0 )%
Permanent differences     1.6 %     0.2 %
Other and prior year true-ups     0.4 %     4.0 %
Change in valuation allowance     25.0 %     22.8 %
Effective income tax rate     (0.0 )%     (0.0 )%

  

F-17 

 

 

KULR TECHNOLOGY GROUP, INC. AND SUBSIDIARY

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

FOR THE YEARS ENDED DECEMBER 31, 2019 AND 2018

 

NOTE 8 INCOME TAXES – CONTINUED

 

The Company has determined that a valuation allowance for the entire net deferred tax asset is required. A valuation allowance is required if, based on the weight of evidence, it is more likely than not that some or the entire portion of the deferred tax asset will not be realized. After consideration of all the evidence, management has determined that a full valuation allowance is necessary to reduce the deferred tax asset to zero.

 

The tax effects of temporary differences that give rise to deferred tax assets and liabilities are presented below:

 

    For The Years Ended  
    December 31,  
    2019     2018  
Deferred Tax Assets:                
Net operating loss carryforwards   $ 1,975,739     $ 1,544,300  
Research and development credit carryforwards     152,785       -  
Stock-based compensation     11,062       187,200  
Accruals     150,548       64,000  
Gross deferred tax assets     2,290,134       1,795,500  
Valuation allowance     (2,290,134 )     (1,795,500 )
                 
Deferred tax asset, net of valuation allowance   $ -     $ -  
                 
Changes in valuation allowance   $ 494,634     $ 469,700  

  

At December 31, 2019 and 2018, the Company had federal net operating loss carry forwards of approximately $7.3 million and $5.7 million, respectively. At December 31, 2019 approximately $3.9 million of federal net operating losses will expire from 2033 to 2037, and approximately $3.4 million will have no expiration. At December 31, 2019 and 2018, the Company had state net operating loss carry forwards of approximately $6.8 million and $5.2 million, respectively, which will begin to expire in 2024.

 

The net operating loss carryovers may be subject to annual limitations under Internal Revenue Code Section 382, and similar state provisions, should there be a greater than 50% ownership change as determined under the applicable income tax regulations. The amount of the limitation would be determined based on the value of the company immediately prior to the ownership change and subsequent ownership changes could further impact the amount of the annual limitation. An ownership change pursuant to Section 382 may have occurred in the past or could happen in the future, such that the NOLs available for utilization could be significantly limited.

 

The Company files federal and state (California) tax returns which are subject to audit for the year beginning December 31, 2016. No tax audits were commenced or were in process during the years ended December 31, 2019 and 2018.

 

NOTE 9 STOCKHOLDERS' DEFICIENCY

 

Authorized Capital

 

The Company is authorized to issue 500,000,000 shares of common stock, par value of $0.0001 per share, and 20,000,000 shares of preferred stock, par value of $0.0001 per share. The holders of the Company’s common stock are entitled to one vote per share. The preferred stock is designated as follows: 1,000,000 shares designated as Series A Preferred Stock, 31,000 shares designated as Series B Convertible Preferred Stock and 400 shares designated as Series C Preferred Stock.

 

F-18 

 

 

KULR TECHNOLOGY GROUP, INC. AND SUBSIDIARY

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

FOR THE YEARS ENDED DECEMBER 31, 2019 AND 2018

 

NOTE 9 STOCKHOLDERS' DEFICIENCY – CONTINUED

 

Equity Incentive Plan

 

On August 15 and November 5, 2018, the Board of Directors and a majority of the Company’s shareholders, respectively, approved the 2018 Equity Incentive Plan (the “2018 Plan”). Under the 2018 Plan, 15,000,000 shares of common stock of the Company are authorized for issuance. The 2018 Plan provides for the issuance of incentive stock options, non-statutory stock options, rights to purchase common stock, stock appreciation rights, restricted stock and restricted stock units to employees, directors and consultants of the Company and its affiliates. The 2018 Plan requires the exercise price of stock options to be not less than the fair value of the Company’s common stock on the date of grant. As of December 31, 2019, there are 14,050,000 shares available for issuance under the 2018 Plan.

 

Series A Preferred Stock

 

The Series A Preferred Stock is not convertible into any series or class of stock of the Company. In addition, holders of the Series A Preferred Stock shall not be entitled to receive dividends, nor do they have a right to distribution from the assets of the Company in the event of any liquidation, dissolution, or winding up of the Company.

 

Each record holder of Series A Preferred Stock shall have the right to vote on any matter with holders of the Company’s common stock and other securities entitled to vote, if any, voting together as one (1) class. Each record holder of Series A Preferred Stock is entitled to one hundred (100) votes per share of Series A Preferred Stock held by such holder.

 

On November 5, 2018, the Company received a written consent of the majority of the stockholders to issue 1,000,000 shares of the Company’s Series A Preferred Stock to Mr. Mo, as a measure to protect the Company from an uninvited takeover. As of the date of filing, the shares of Series A Preferred Stock have not been issued.

 

Series B Convertible Preferred Stock

 

On November 30, 2018, the Company filed with the Secretary of State of the State of Delaware the Certificate of Designation of Series B Convertible Preferred Stock (the “Certificate of Designation”), which became effective upon filing.

 

The Company designated 31,000 shares as Series B Convertible Preferred Stock out of the authorized and unissued preferred stock of the Company, par value $0.0001 per share. The Series B Convertible Preferred Stock does not contain any redemption provisions or other provisions requiring cash settlement within control of the holder. Series B Convertible Preferred Stock is senior in liquidation preference to common stock. Holders of shares of Series B Convertible Preferred Stock are not entitled to voting rights and dividend rights. Each share of Series B Convertible Preferred Stock, after 181 days after issuance and without the payment of additional consideration, shall be convertible at the option of the holder into fifty (50) fully paid and non-assessable shares of common stock. It was determined that the embedded conversion option is clearly and closely related to the equity host, therefore it is not bifurcated and not accounted for as a derivative. Each share of Series B Convertible Preferred Stock shall have a stated value of $1.00 per share.

 

On November 30, 2018, the Company issued an aggregate of 30,858 shares of Series B Convertible Preferred Stock to certain existing common shareholders for aggregate proceeds of $30,858, which was determined to be nominal consideration. The Company analyzed the transaction and concluded that the issuance represented a deemed dividend in the form of the Series B Convertible Preferred Stock that was issued to a subset of the Company’s common stockholders, since the transaction’s primary purpose was not to raise capital and required no action by the recipients. The shares of Series B Convertible Preferred Stock were determined to have an aggregate issuance date fair value of $1,018,314, which was reduced by the consideration paid of $30,858, to arrive at the deemed dividend of $987,456. The Company recognized the deemed dividend by debiting and crediting additional paid-in capital.

 

During the year ended December 31, 2019, holders of Series B Convertible Preferred Stock elected to convert an aggregate of 16,371 shares of Series B Convertible Preferred Stock into an aggregate of 818,550 shares of common stock.

 

F-19 

 

 

KULR TECHNOLOGY GROUP, INC. AND SUBSIDIARY

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

FOR THE YEARS ENDED DECEMBER 31, 2019 AND 2018

 

NOTE 9 STOCKHOLDERS' DEFICIENCY – CONTINUED

 

Series C Convertible Preferred Stock

 

On August 19, 2019, the Company filed with the Secretary of State of the State of Delaware the Certificate of Designation of Series C Convertible Preferred Stock (the “Certificate of Designation”), which became effective upon filing. Pursuant to the Certificate of Designation, the Company designated 400 shares as Series C Convertible Preferred Stock out of the authorized and unissued preferred stock of the Company, par value $0.0001 per share.

 

Series C Convertible Preferred Stock is senior in liquidation preference to the Company’s common stock for an amount equal to the stated value per share of $10,000 (“Stated Value”). Holders of shares of Series C Convertible Preferred Stock shall vote on an as-if-converted-to-common-stock basis with the common stock. Holders of shares of Series C Convertible Preferred Stock are entitled to receive dividends when, as and if declared by the Board of Directors, at an annual rate of twelve percent (12%) beginning one year after each share’s issuance. The Company may elect to redeem all or part of each share of Series C Convertible Preferred Stock for the Stated Value.

 

Each share of Series C Convertible Preferred Stock, if converted within 180 days of such share’s initial issuance, is convertible into a number of shares of common stock equal to the product determined by multiplying (i) the number of shares of Series C Convertible Preferred Stock being converted and any accrued dividends thereon and (ii) $1.00 per share. Each share of Series C Convertible Preferred Stock, if converted on or after the 181st day of its initial issuance, is convertible into a number of shares of common stock equal to the product determined by multiplying (i) the number of shares of Series C Convertible Preferred Stock being converted and any accrued dividends thereon and (ii) 75% of the average of the trading prices five days prior to conversion but in no case less than $0.90 per share. In addition, all outstanding shares of Series C Convertible Preferred Stock may be automatically converted upon the occurrence of a qualified offering of at least $5 million of gross proceeds (“Qualified Offering”) or an approved listing of common stock on a national stock exchange (“Uplisting”). In the event of a Qualified Offering, each share of Series C Convertible Preferred Stock would be converted into a number of shares of common stock equal to the product determined by dividing (i) the Stated Value of the number of shares of Series C Convertible Preferred Stock being converted and any accrued dividends thereon and (ii) 85% of the price of the securities sold in the Qualified Offering. In the event of an Uplisting, each share of Series C Convertible Preferred Stock would be converted into a number of shares of common stock equal to the product determined by dividing (i) the Stated Value of the number of shares of Series C Convertible Preferred Stock being converted and any accrued dividends thereon and (ii) if converted within 180 days of such share’s initial issuance, $1.00 per share, and if converted on or after the 181st day of its initial issuance, 75% of the average of the trading prices five days prior to conversion but in no case less than $0.90 per share.

 

During the year ended December 31, 2019, the Company sold to certain investors an aggregate of 24.01 shares of Series C Convertible Preferred Stock and two-year immediately vested warrants to purchase an aggregate of 60,025 shares of the Company’s common stock at an exercise price of $1.50 per share for aggregate gross proceeds of $216,000, less cash issuance costs of $32,000, for aggregate net proceeds of $184,000. The warrants, which were determined to be classified within stockholders’ deficiency, had an aggregate issuance date fair value of $12,515. The Company has computed the fair value of warrants using the Black-Scholes pricing model with the following assumptions: risk free interest rate: 1.53% - 1.74%; expected term – 2 years, expected volatility - 97%, expected dividends – 0%.

 

The Series C Convertible Preferred Stock is redeemable at the Company’s option, therefore it has been classified within stockholders’ deficiency on the consolidated balance sheet. An overall analysis of its features performed by the Company determined that the Series C Convertible Preferred Stock was more akin to equity. As a result, while the embedded conversion option (“ECO”) contained certain anti-dilution price protection mechanisms, since the ECO was clearly and closely related to the equity host, it was not required to be bifurcated and accounted for as a derivative liability under ASC 815. The Company determined that the Series C Convertible Preferred Stock did not contain a beneficial conversion feature, since the conversion price exceeded the estimated fair value of the Company’s common stock as of the commitment date, except upon a conversion in the event of a Qualified Offering, which was determined to be a contingent beneficial conversion feature, which will be measured when the contingency is resolved and, if determined to be beneficial at such time, will be recognized.

 

F-20 

 

 

KULR TECHNOLOGY GROUP, INC. AND SUBSIDIARY

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

FOR THE YEARS ENDED DECEMBER 31, 2019 AND 2018

 

NOTE 9 STOCKHOLDERS' DEFICIENCY – CONTINUED

 

Common Stock

 

During the year ended December 31, 2018, the Company sold an aggregate of 1,081,819 shares of common stock at $0.66 per share to accredited investors for aggregate gross and net proceeds of $714,000 and $672,400, respectively. Of the $41,600 of issuance costs, $35,000 were cash costs and $6,600 were non-cash costs in the form of 10,000 shares of common stock that were issued during 2018.

 

During the year ended December 31, 2019, the Company sold an aggregate of 1,361,059 shares of common stock at $0.66 per share to accredited investors for aggregate gross proceeds of $898,300.

 

During the years ended December 31, 2019 and 2018, the Company issued 140,000 and 25,000 shares, respectively, of common stock under the 2018 Plan and 45,966 and 159,437 shares, respectively, of restricted common stock to consultants in exchange for services, which vest immediately. The grant date value of the common stock and restricted common stock were $133,660 and $145,904 during the years ended December 31, 2019 and 2018, respectively.

 

Warrants

 

On June 10, 2019, the Company issued two-year immediately vested warrants to purchase an aggregate of 150,000 shares of the Company’s common stock at an exercise price of $1.00 per share to certain vendors in connection with consulting agreements. The warrants vested immediately on the date of issuance. The warrants, which were determined to be classified within stockholders’ deficiency, had an aggregate issuance date fair value of $40,974. The Company has computed the fair value of the warrants using the Black Scholes option pricing model with the following valuation assumptions: risk free interest rate – 1.90%, contractual term – 2.0 years, expected volatility –97%, expected dividends – 0%.

 

During the year ended December 31, 2019, the Company issued two-year immediately vested warrants to purchase an aggregate of 60,025 shares of the Company’s common stock at an exercise price of $1.50 per share to certain investors in connection with the Series C Convertible Preferred Stock sales. (See Note 9 – Stockholders’ Deficiency, Series C Convertible Preferred Stock)

 

A summary of warrants activity during the year ended December 31, 2019 is presented below:

 

          Weighted     Weighted        
          Average     Average        
    Number of     Exercise     Remaining     Intrinsic  
    Warrants     Price     Term (Yrs)     Value  
Outstanding, January 1, 2019     -     $ -                  
Issued     210,025       1.14                  
Exercised     -       -                  
Expired     -       -                  
Forfeited     -       -                  
Outstanding, December 31, 2019     210,025       1.14       1.5     $       -  
                                 
Exercisable, December 31, 2019     210,025     $ 1.14       1.5     $ -  

 

F-21 

 

 

KULR TECHNOLOGY GROUP, INC. AND SUBSIDIARY

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

FOR THE YEARS ENDED DECEMBER 31, 2019 AND 2018

 

NOTE 9 STOCKHOLDERS' DEFICIENCY – CONTINUED

 

Warrants – Continued

 

A summary of outstanding and exercisable warrants as of December 31, 2019 is presented below:

 

Warrants Outstanding     Warrants Exercisable  
            Weighted      
      Outstanding     Average   Exercisable  
Exercise     Number of     Remaining Life   Number of  
Price     Warrants     In Years   Warrants  
$ 1.00       150,000     1.4     150,000  
$ 1.50       60,025     1.7     60,025  
          210,025     1.5     210,025  

 

Stock Options

 

On December 28, 2018, the Company granted five-year options to purchase a total of 300,000 shares of common stock at an exercise price of $0.66 per share to employees pur