TSX - NYSE: RIC
TORONTO, July 27, 2017 /CNW Telbec/ - Richmont Mines
Inc. (TSX: RIC) (NYSE: RIC) ("Richmont" or the "Corporation"),
is pleased to provide an update on its strategic exploration
drilling program currently underway at the cornerstone Island Gold
Mine. Recent exploration drilling has intersected high-grade, wide
mineralization in the down plunge extension of the main Island Gold
deposit with Hole MH8-4 intersecting 19.85 g/t gold over 8.4 metres
(true width).
"Our deep directional drilling further confirms the continuation
of high-grade, wide zones located in the down plunge extension of
the main deposit and we see significant potential to increase
mineral resources at depth. Concurrently, we are very encouraged
with the results reported from the eastern lateral extension of the
main deposit where we anticipate adding near-mine resources that
could be incorporated into the current mine plan," stated
Renaud Adams, CEO. He continued, "As
our ongoing drilling continues to demonstrate the resource
potential of the Island Gold deposit, we remain confident that we
will extend the mineralized resource blocks located outside the
Expansion Case PEA area with quality high-grade ounces. Over the
balance of the year we will continue to advance our disciplined
drilling program with an overall focus on identifying the next
million ounces of gold resources located outside the PEA."
2017 DRILLING PROGRAM – ISLAND GOLD MINE (Figure 1)
The 2017 exploration drilling program, currently underway,
continues to build on the positive results achieved in 2016 and is
primarily focused on expanding near-mine resources outside the
Expansion Case Preliminary Economic Assessment ("PEA") area, both
laterally and at depth.
Deep Directional Exploration Drilling Program Highlights
(Figure 2)
The successful 2016 deep drilling program identified a new large
inferred resource block of 760,000 tonnes at a grade of 9.53 g/t
gold (containing approximately 230,000 ounces, assays capped at 70
g/t gold) in the down plunge extension, located between the 1,050
and the 1,300 metre levels. The main objective of the 2017 deep
directional exploration drilling program is to prove the high-grade
extension of the new resource block to a minimum vertical depth of
1,500 metres. Results to date include three significant intercepts
(Table 1) (All results are reported with estimated true
widths and assays capped at 70 g/t gold.):
- Hole MH8-4 intersected 19.85 g/t gold over 8.4 metres in the
eastern portion of the down plunge extension of the deposit. The
intersection is located approximately 1,300 metres below surface
and includes 71.76 g/t gold over 0.5 metres, 141.43 g/t gold over
0.59 metres and 318.28 g/t gold over 0.25 metres.
- Hole MH2A-12 intersected 11.67 g/t gold over 9.42 metres,
including 548.1 g/t gold over 0.24 metres.
- Hole MH2A-13 intersected 8.86 g/t gold over 6.39 metres at a
depth of 1,350 metres.
These three new high-grade, wide intercepts confirm that the
interpreted down plunge extension of the main Island Gold deposit
remains open to a minimum vertical depth of 1,350 metres.
Mineralization in this area remains consistent with the main
portion of the deposit.
Other highlights from the deep directional exploration drilling
include (Table 1):
- Hole MH1-11: 20.78 g/t gold over 1.28 metres (undefined
zone)
- Hole MH7: 17.85 g/t gold over 1.68 metres (undefined zone)
Deep directional drilling holes have been completed below the
western limit of the Expansion Case PEA area and assays are
pending.
Currently, there are three deep directional drills working in
the area with a total of 14,059 metres of a planned 36,000 metre
drill program have been drilled to date.
Eastern Lateral Infill and Exploration Drilling Program
(Figure 3)
The 2016 drilling program successfully added two new inferred
resource blocks in the eastern lateral extension, located
approximately 300 metres east of the Expansion Case PEA area,
between the 340 and the 750 metre levels. The largest inferred
resource block contains approximately 290,000 tonnes at a grade of
10.35 g/t gold (approximately 95,000 ounces of gold, capped at 70
g/t gold).
Infill drilling is on-going in the upper part of the new
resource block from the 340 metre level with encouraging results to
date. The extension of the 620 metre level exploration drift is
advancing as planned with infill drilling in the lower part of the
block expected to begin shortly. Recent highlights from Eastern
Lateral infill drilling include (Table 2) (All results are
reported with estimated true widths and assays capped at 70 g/t
gold.):
- Hole 340-588-30: 14.15 g/t gold over 2.91 metres
- Hole 340-588-40: 23.10 g/t gold over 2.40 metres
- Hole 340-588-45: 14.71 g/t gold over 2.59 metres
- Hole 340-588-50: 12.52 g/t gold over 3.00 metres
- Hole 340-588-52: 16.16 g/t gold over 2.35 metres
Exploration drilling in the eastern lateral extension is focused
in the area where hole GD-640-05 intersected 20.57 g/t of gold over
a core length of 11.3 metres, at a vertical depth of approximately
1,000 metres. One directional drill rig has been redeployed to this
area to follow-up on this intersection to better understand the
geometry and true width of this new high-grade mineralization.
Highlights of recent drilling include (Table 2):
- Hole GD-640-05-3 intersected 13.81 g/t gold over 5.2 metres
(core length) at the same elevation of GD-640-05, but located 40
metres to the east. Results to date indicate a potential flat,
high-grade zone with quartz veins.
- Hole GD-640-05-5 intersected a small high-grade zone of 58.34
g/t gold over 0.43 metres in the plane of the E1E Zone.
Another surface drill rig is currently working further to the
east, approximately 1,500 metres from the second dike, to test the
lateral extension of the main mineralized structure. To date, two
small gold zones have been identified, including:
- Hole GD-670-01: 4.17 g/t gold over 2.44 metres
- Hole GD-690-01: 15.39 g/t gold over 0.89 metres
A total of 18,465 metres of a planned 37,000 metres of
exploration and infill drilling has been completed to date with two
surface drill rigs and one underground drill from the 340 metre
level.
Expansion Case PEA Delineation Drilling Program (Figure
4)
For 2017, a total of 30,000 metres of delineation drilling is
planned within the Expansion Case PEA area, primarily in the fourth
mining horizon located between the 860 and 1,000 metre levels, with
the objective of converting inferred resource blocks to reserves.
Currently, two drill rigs are working in the area and a total of
8,515 metres has been completed to date. Recent highlights include
(Table 3) (All results are reported with estimated true widths
and assays capped at 225 g/t gold.):
- Hole 860-511-03: 37.09 g/t gold over 4.98 metres
- Hole 860-511-07: 51.02 g/t gold over 3.54 metres
- Hole 860-517-07: 52.09 g/t gold over 4.99 metres
- Hole 860-517-08: 45.20 g/t gold over 3.27 metres
- Hole 740-465-40: 31.80 g/t gold over 1.92 metres
Exploration drilling is also underway within the Expansion Case
PEA area with the objective of adding resources between the current
resources blocks. Recent drilling highlights include:
- Hole 740-465-25: 87.64 g/t gold over 4.90 metres (undefined
zone)
- Hole 740-465-29: 49.15 g/t gold over 4.19 metres (undefined
zone)
Qualified Persons
The scientific and technical content and interpretations
contained in this news release have been reviewed, verified and
approved by Daniel Adam P.Geo.,
Ph.D., Richmont's Vice-President, Exploration, a Qualified Person
as defined by National Instrument 43-101 – Standards of
Disclosure for Mineral Projects ("NI 43-101"). For additional
information about prior drilling results, refer to the
Corporation's technical report titled "Island Gold Mine Technical
Report and Expansion Case Preliminary Economic Assessment,
Dubreuilville, Ontario, Canada"
dated July 13, 2017 with an effective
date of May 29, 2017.
Quality Control
Assays for the diamond drilling programs were done at LabExpert
in Rouyn-Noranda. The Corporation
inserts at regular intervals quality control (QC) samples (blanks
and reference materials) to monitor laboratory performance. Cross
check assays are done on a regular basis in a second accredited
laboratory.
About Richmont Mines Inc.
Richmont Mines currently
produces gold from the Island Gold Mine in Ontario, and the Beaufor Mine in Quebec. The Corporation is also advancing
development of the significant high-grade resource extension at
depth of the Island Gold Mine in Ontario. With more than 35 years of experience
in gold production, exploration and development, and prudent
financial management, the Corporation is well-positioned to
cost-effectively build its Canadian reserve base and to
successfully enter its next phase of growth.
Forward-Looking Statements
This news release contains
forward-looking statements that include risks and uncertainties.
When used in this news release, the words "estimate", "project",
"anticipate", "expect", "intend", "believe", "hope", "may",
"objective" and similar expressions, as well as "will", "shall" and
other indications of future tense, are intended to identify
forward-looking statements. The forward-looking statements are
based on current expectations and apply only as of the date on
which they were made. Except as may be required by law or
regulation, the Corporation undertakes no obligation and disclaims
any responsibility to publicly update or revise any forward-looking
statements or information, whether as a result of new information,
future events or otherwise.
The factors that could cause actual results to differ materially
from those indicated in such forward-looking statements include,
without limitation, changes in the prevailing price of gold, the
Canadian-United States exchange rate, grade of ore mined and
unforeseen difficulties in mining operations that could affect
revenue and production costs. Other factors such as uncertainties
regarding government regulations and the failure of our exploration
drilling programs to identify significant new resources or targets
or expand existing resources could also affect the results. Other
risks may be set out in Richmont's Annual Information Form, Annual
Reports and periodic reports. The forward-looking information
contained herein is made as of the date of this news release.
Cautionary note to US investors concerning resource
estimates
Information in this press release is intended to
comply with the requirements of the Toronto Stock Exchange and
applicable Canadian securities legislation, which differ in certain
respects with the rules and regulations promulgated under the
United States Securities Exchange Act of 1934, as amended
("Exchange Act"), as promulgated by the United States Securities
and Exchange Commission (the "SEC"). The requirements of NI 43-101
adopted by the Canadian Securities Administrators differ
significantly from the requirements of the SEC.
U.S. Investors are urged to consider the disclosure in our
annual report on Form 40-F, File No. 001-14598, as filed with the
SEC under the Exchange Act, which may be obtained from us (without
cost) or from the SEC's web site: http://sec.gov/edgar.shtml.
Tables of Drill Results
TABLE
1
DEEP DRILLING
PROGRAM - EXPLORATION AND INFILL
|
Hole
Number
|
Length
(metres)
|
From
(metres)
|
To
(metres)
|
True Width
(metres)
|
Uncut Grade
(g/t Au)
|
Cut Grade
(g/t Au)
|
Zone
|
Vertical depth
of intersection
(metres)
|
MH1-11
|
1,574
|
1,265.20
|
1,267.57
|
1.25
|
4.33
|
4.33
|
H
|
1,146
|
MH1-11
|
|
1,329.10
|
1,331.50
|
1.28
|
20.88
|
20.78
|
X(1)
|
1,206
|
including
|
|
1,329.40
|
1,329.70
|
0.16
|
70.77
|
70.00
|
|
|
MH1-11
|
|
1,396.00
|
1,400.50
|
2.71
|
0.72
|
0.72
|
C
|
1,270
|
MH2A-11
|
1,577
|
1,413.65
|
1,416.60
|
2.12
|
0.09
|
0.09
|
E1E
|
1,283
|
MH2A-12
|
1,613
|
1,416.40
|
1,428.10
|
9.42
|
23.23
|
11.67
|
E1E
|
1,297
|
including
|
|
1,419.50
|
1,420.90
|
1.13
|
143.38
|
43.73
|
|
|
MH2A-12
|
|
1,456.90
|
1,458.80
|
1.53
|
93.04
|
17.55
|
X
|
1,330
|
including
|
|
1,457.50
|
1,457.80
|
0.24
|
548.10
|
70.00
|
|
|
MH2A-13
|
1,739
|
1,453.40
|
1,461.60
|
6.39
|
8.86
|
8.86
|
E1E
|
1,341
|
MH2A-13
|
|
1,608.40
|
1,622.70
|
11.25
|
2.65
|
2.65
|
X
|
1,492
|
MH5-4
|
1,625
|
1,139.61
|
1,140.32
|
0.43
|
9.65
|
9.65
|
X
|
1,005
|
MH5-4
|
|
1,424.24
|
1,427.82
|
2.53
|
0.87
|
0.87
|
C
|
1,263
|
MH5-4
|
|
1,491.17
|
1,491.83
|
0.47
|
109.22
|
42.75
|
X
|
1,322
|
including
|
|
1,491.50
|
1,491.83
|
0.24
|
202.94
|
70.00
|
|
|
MH-7
|
1,883
|
1,291.60
|
1,293.70
|
1.68
|
17.85
|
17.85
|
X
|
1,082
|
including
|
|
1,293.10
|
1,293.40
|
0.24
|
68.57
|
68.57
|
|
|
MH-7
|
|
1,476.00
|
1,480.00
|
3.53
|
2.35
|
2.35
|
C
|
1,228
|
MH8-1C
|
1,583
|
1,407.70
|
1,412.00
|
3.01
|
0.62
|
0.62
|
E1E
|
1,252
|
MH8-2
|
1,658
|
1,416.90
|
1,423.90
|
6.42
|
0.99
|
0.99
|
E1E
|
1,281
|
MH8-3B
|
1,646
|
1,386.00
|
1,390.20
|
2.67
|
1.42
|
1.42
|
E1E
|
1,214
|
MH8-4
|
1,658
|
1,441.80
|
1,451.80
|
8.40
|
32.41
|
19.85
|
E1E
|
1,303
|
including
|
|
1,443.70
|
1,444.30
|
0.50
|
71.76
|
70.00
|
|
|
including
|
|
1,446.50
|
1,447.20
|
0.59
|
141.43
|
70.00
|
|
|
including
|
|
1,448.85
|
1,449.15
|
0.25
|
318.28
|
70.00
|
|
|
High-grade capping
values: Lower Island C Zone
(225 g/t Au), B Zone (60 g/t Au) Lower X2-E1E Zone. East Lateral E1E Zone and X Zone
(70 g/t Au) (1) X Zone
correspond to presently undefined mineralised zone
|
TABLE
2
EASTERN LATERAL
INFILL AND EXPLORATION DRILLING
|
Hole
Number
|
Length
(metres)
|
From
(metres)
|
To
(metres)
|
True Width
(metres)
|
Uncut Grade
(g/t Au)
|
Cut Grade
(g/t Au)
|
Zone
|
Vertical depth
of intersection
(metres)
|
340-586-10
|
111
|
82.60
|
86.23
|
3.42
|
8.62
|
8.62
|
E1E
|
301
|
including
|
|
83.00
|
83.50
|
0.47
|
46.18
|
46.18
|
|
|
340-586-11
|
120
|
93.00
|
96.13
|
2.71
|
12.63
|
12.63
|
E1E
|
322
|
including
|
|
93.40
|
93.90
|
0.43
|
63.60
|
63.60
|
|
|
340-586-12
|
135
|
101.80
|
105.00
|
2.58
|
17.10
|
12.55
|
E1E
|
336
|
including
|
|
102.80
|
103.30
|
0.40
|
99.12
|
70.00
|
|
|
340-586-14
|
192
|
144.60
|
148.90
|
2.53
|
10.90
|
9.98
|
E1E
|
392
|
including
|
|
146.10
|
146.50
|
0.24
|
79.95
|
70.00
|
|
|
340-588-27
|
120
|
93.60
|
96.40
|
2.72
|
8.76
|
8.76
|
E1E
|
300
|
340-588-30
|
186
|
139.00
|
143.40
|
2.91
|
26.76
|
14.15
|
E1E
|
376
|
including
|
|
143.00
|
143.40
|
0.26
|
208.80
|
70.00
|
|
|
340-588-31
|
207
|
153.70
|
158.00
|
2.27
|
48.01
|
12.02
|
E1E
|
394
|
including
|
|
156.90
|
157.50
|
0.32
|
327.95
|
70.00
|
|
|
340-588-38
|
207
|
157.00
|
161.50
|
2.30
|
6.25
|
6.25
|
E1E
|
397
|
340-588-39
|
222
|
173.80
|
178.40
|
2.07
|
8.38
|
8.38
|
E1E
|
414
|
340-588-40
|
246
|
194.00
|
199.80
|
2.40
|
98.85
|
23.10
|
E1E
|
435
|
including
|
|
194.40
|
196.60
|
0.80
|
257.09
|
57.38
|
|
|
340-588-44
|
168
|
125.30
|
129.50
|
2.80
|
8.05
|
8.05
|
E1E
|
356
|
340-588-45
|
189
|
140.50
|
144.70
|
2.59
|
18.83
|
14.71
|
E1E
|
374
|
including
|
|
140.50
|
140.90
|
0.25
|
113.25
|
70.00
|
|
|
340-588-46
|
210
|
156.00
|
160.40
|
2.46
|
30.05
|
7.24
|
E1E
|
394
|
including
|
|
156.70
|
157.00
|
0.17
|
404.54
|
70.00
|
|
|
340-588-47
|
231
|
176.40
|
181.40
|
2.18
|
16.79
|
16.08
|
E1E
|
415
|
including
|
|
179.90
|
180.20
|
0.13
|
81.77
|
70.00
|
|
|
340-588-50
|
126
|
110.70
|
114.80
|
3.00
|
13.58
|
12.52
|
E1E
|
321
|
including
|
|
111.20
|
111.90
|
0.51
|
71.02
|
64.80
|
|
|
340-588-52
|
207
|
164.40
|
170.30
|
2.35
|
16.16
|
16.16
|
E1E
|
397
|
GD-640-05-2
|
1,332
|
1,090.00
|
1,095.00
|
3.17
|
1.91
|
1.91
|
E1E
|
1,039
|
GD-640-05-3
|
1,537
|
1,061.30
|
1,065.80
|
2.21
|
4.62
|
4.62
|
E1E
|
990
|
GD-640-05-3
|
|
1,086.10
|
1,091.30
|
5.20
c.l.
|
13.81
|
13.81
|
X
|
1,012
|
including
|
|
1,086.10
|
1,087.50
|
1.40
c.l.
|
35.26
|
35.26
|
|
|
GD-640-05-3
|
|
1,119.15
|
1,120.70
|
0.77
|
69.41
|
29.47
|
X
|
1,039
|
including
|
|
1,119.60
|
1,120.20
|
0.30
|
173.18
|
70.00
|
|
|
GD-640-05-3
|
|
1,246.15
|
1,248.30
|
1.08
|
6.49
|
6.49
|
X
|
1,151
|
GD-640-05-4
|
1,484
|
1,036.35
|
1,042.85
|
3.52
|
0.22
|
0.22
|
E1E
|
972
|
GD-640-05-5
|
1,547
|
1,121.15
|
1,121.95
|
0.43
|
216.04
|
58.34
|
E1E
|
1,062
|
including
|
|
1,121.15
|
1,121.65
|
0.27
|
322.32
|
70.00
|
|
|
GD-670-01
|
1,052
|
744.77
|
746.08
|
1.02
|
8.61
|
8.61
|
X
|
600
|
GD-670-01
|
|
761.95
|
763.57
|
1.34
|
5.10
|
5.10
|
X
|
614
|
GD-670-01
|
|
831.10
|
834.00
|
2.44
|
4.17
|
4.17
|
E1E?
|
670
|
GD-670-02
|
1,163
|
695.85
|
712.50
|
12.82
|
0.77
|
0.77
|
X
|
606
|
GD-670-03
|
973
|
781.20
|
782.20
|
0.87
|
1.48
|
1.48
|
X
|
588
|
GD-690-01
|
1,007
|
739.15
|
740.15
|
0.89
|
15.39
|
15.39
|
E1E?
|
530
|
GD-690-02
|
812
|
473.50
|
475.40
|
1.83
|
4.22
|
4.22
|
X
|
284
|
TABLE
3
INFILL DELINEATION
IN PEA AREA
(ONLY RESULTS
ABOVE 6 G/T ARE PRESENTED)
|
Hole
Number
|
Length
(metres)
|
From
(metres)
|
To
(metres)
|
True Width
(metres)
|
Uncut Grade
(g/t Au)
|
Cut Grade
(g/t Au)
|
Zone
|
Vertical depth
of intersection
(metres)
|
740-465-25
|
231
|
188.60
|
194.20
|
4.90
|
261.46
|
39.96
|
X
|
656
|
including
|
|
189.00
|
193.10
|
3.59
|
356.78
|
54.24
|
|
|
740-465-29
|
261
|
107.00
|
109.50
|
2.41
|
17.49
|
17.49
|
D
|
716
|
740-465-29
|
|
168.00
|
171.40
|
3.16
|
11.72
|
11.72
|
X
|
694
|
740-465-29
|
|
204.60
|
209.10
|
4.19
|
126.54
|
21.59
|
X
|
681
|
including
|
|
204.60
|
205.40
|
0.74
|
660.31
|
70.00
|
|
|
740-465-31
|
201
|
145.00
|
150.00
|
4.62
|
6.71
|
6.71
|
C
|
799
|
740-465-32
|
222
|
173.40
|
176.00
|
2.27
|
6.66
|
6.66
|
B
|
836
|
740-465-39
|
399
|
244.90
|
258.50
|
2.78
|
6.84
|
6.84
|
C
|
957
|
including
|
|
249.10
|
249.80
|
0.14
|
100.18
|
100.18
|
|
|
740-465-40
|
402
|
314.10
|
322.90
|
1.92
|
51.76
|
31.80
|
C
|
1,017
|
including
|
|
321.20
|
322.20
|
0.22
|
400.63
|
225.00
|
|
|
785-487-08
|
186
|
129.80
|
133.10
|
2.15
|
7.28
|
7.28
|
C
|
849
|
785-487-20
|
114
|
78.00
|
81.30
|
3.18
|
41.47
|
29.51
|
D1
|
746
|
including
|
|
79.50
|
81.30
|
1.73
|
73.79
|
51.85
|
|
|
785-487-21
|
111
|
76.50
|
81.60
|
4.81
|
7.33
|
7.33
|
D1
|
743
|
800-494-02
|
196
|
153.37
|
159.00
|
3.02
|
14.84
|
14.84
|
C
|
918
|
including
|
|
153.37
|
153.90
|
0.28
|
144.58
|
144.58
|
|
|
800-498-03
|
249
|
129.00
|
136.20
|
2.91
|
7.30
|
7.30
|
D1
|
910
|
820-519-01
|
165
|
132.80
|
135.11
|
2.16
|
99.55
|
10.80
|
X
|
797
|
including
|
|
134.17
|
134.48
|
0.29
|
731.32
|
225.00
|
|
|
820-520-04
|
174
|
156.80
|
171.00
|
6.62
|
45.70
|
22.58
|
C
|
860
|
including
|
|
157.43
|
158.63
|
0.56
|
498.59
|
225.00
|
|
|
820-520-10
|
198
|
169.60
|
179.40
|
6.63
|
31.83
|
27.50
|
C
|
876
|
including
|
|
169.90
|
171.90
|
1.35
|
127.38
|
106.17
|
|
|
820-520-11
|
195
|
155.00
|
162.30
|
5.34
|
24.50
|
24.50
|
C
|
860
|
including
|
|
155.00
|
155.60
|
0.44
|
214.97
|
214.97
|
|
|
820-520-12
|
252
|
207.60
|
213.00
|
4.40
|
6.97
|
6.97
|
C
|
925
|
820-520-12
|
252
|
216.70
|
221.00
|
3.50
|
7.39
|
7.39
|
X
|
930
|
840-504-01
|
180
|
154.20
|
157.40
|
2.64
|
12.46
|
12.46
|
X
|
871
|
840-504-08
|
186
|
114.00
|
123.00
|
6.31
|
15.76
|
11.00
|
C
|
868
|
including
|
|
117.60
|
117.90
|
0.21
|
367.92
|
225.00
|
|
|
840-504-08
|
|
135.00
|
138.80
|
2.86
|
95.39
|
10.33
|
B
|
873
|
including
|
|
136.40
|
137.00
|
0.45
|
598.72
|
60.00
|
|
|
840-504-08
|
|
160.70
|
167.70
|
5.61
|
15.44
|
12.51
|
G1
|
882
|
including
|
|
165.90
|
167.70
|
1.44
|
50.55
|
39.18
|
|
|
840-504-09
|
210
|
172.40
|
175.32
|
2.43
|
11.03
|
9.68
|
G
|
918
|
840-504-10
|
250
|
235.40
|
241.00
|
3.01
|
19.80
|
6.77
|
G
|
1,005
|
including
|
|
235.80
|
236.20
|
0.21
|
222.38
|
40.00
|
|
|
840-513-01
|
102
|
81.00
|
88.20
|
5.49
|
34.58
|
34.58
|
C
|
854
|
including
|
|
82.10
|
82.52
|
0.32
|
163.92
|
163.92
|
|
|
including
|
|
83.48
|
83.80
|
0.24
|
132.86
|
132.86
|
|
|
860-509-01
|
132
|
73.90
|
77.00
|
2.55
|
43.76
|
26.24
|
C
|
867
|
including
|
|
75.90
|
76.20
|
0.25
|
406.05
|
225.00
|
|
|
860-509-01
|
|
97.90
|
101.10
|
3.11
|
11.94
|
6.46
|
B
|
867
|
including
|
|
98.20
|
98.50
|
0.29
|
118.46
|
60.00
|
|
|
860-509-02
|
135
|
89.50
|
95.50
|
4.08
|
13.59
|
13.59
|
C
|
889
|
including
|
|
94.80
|
95.20
|
0.27
|
116.26
|
116.26
|
|
|
860-509-04
|
138
|
59.85
|
64.70
|
4.73
|
65.07
|
52.29
|
C
|
845
|
including
|
|
60.55
|
61.00
|
0.44
|
187.78
|
187.78
|
|
|
including
|
|
61.70
|
62.00
|
0.29
|
431.69
|
225.00
|
|
|
860-509-05
|
106
|
56.80
|
66.40
|
9.29
|
22.36
|
19.77
|
C
|
856
|
including
|
|
57.55
|
58.25
|
0.68
|
260.44
|
225.00
|
|
|
860-509-05
|
106
|
102.70
|
106.00
|
3.19
|
24.61
|
21.45
|
G
|
852
|
860-509-06
|
135
|
78.00
|
83.00
|
3.31
|
13.50
|
13.50
|
C
|
876
|
including
|
|
81.80
|
82.10
|
0.20
|
175.82
|
175.82
|
|
|
860-509-07
|
135
|
96.50
|
102.75
|
4.84
|
7.00
|
7.00
|
C
|
897
|
860-509-13
|
171
|
137.65
|
141.00
|
2.66
|
30.27
|
7.13
|
G
|
938
|
including
|
|
138.88
|
139.35
|
0.37
|
204.93
|
40.00
|
|
|
860-511-01
|
120
|
85.00
|
87.75
|
2.27
|
7.36
|
7.36
|
B
|
890
|
860-511-02
|
78
|
49.83
|
54.00
|
3.75
|
55.50
|
40.64
|
C
|
857
|
including
|
|
50.27
|
50.75
|
0.43
|
354.14
|
225.00
|
|
|
860-511-02
|
|
69.74
|
73.00
|
3.03
|
13.31
|
10.68
|
B
|
854
|
860-511-03
|
114
|
64.14
|
71.24
|
4.98
|
37.76
|
37.09
|
C
|
880
|
including
|
|
68.12
|
68.66
|
0.38
|
233.72
|
225.00
|
|
|
860-511-05
|
75
|
44.00
|
49.00
|
4.88
|
68.26
|
57.04
|
C
|
845
|
including
|
|
45.90
|
47.25
|
1.32
|
116.36
|
116.36
|
|
|
including
|
|
47.80
|
48.10
|
0.29
|
412.01
|
225.00
|
|
|
860-511-05
|
|
66.00
|
69.00
|
2.99
|
34.55
|
24.87
|
B
|
837
|
860-511-06
|
99
|
47.80
|
57.00
|
8.37
|
63.73
|
39.96
|
C
|
858
|
including
|
|
47.80
|
49.00
|
1.09
|
407.24
|
225.00
|
|
|
including
|
|
53.90
|
54.20
|
0.27
|
128.12
|
128.12
|
|
|
860-511-06
|
|
71.00
|
74.00
|
2.95
|
37.24
|
6.31
|
B
|
856
|
including
|
|
72.70
|
73.00
|
0.30
|
369.36
|
60.00
|
|
|
860-511-07
|
111
|
61.70
|
66.50
|
3.54
|
99.05
|
51.02
|
C
|
878
|
including
|
|
62.03
|
62.40
|
0.27
|
206.16
|
206.16
|
|
|
including
|
|
63.93
|
64.57
|
0.47
|
585.26
|
225.00
|
|
|
860-517-01
|
|
80.20
|
85.00
|
4.01
|
21.75
|
21.75
|
C
|
849
|
860-517-03
|
108
|
85.90
|
97.30
|
6.80
|
48.52
|
28.50
|
C
|
861
|
including
|
|
85.90
|
86.90
|
0.60
|
453.23
|
225.00
|
|
|
including
|
|
87.90
|
88.20
|
0.18
|
213.94
|
213.94
|
|
|
860-517-04
|
126
|
102.50
|
108.00
|
4.65
|
11.06
|
11.06
|
C
|
886
|
860-517-05
|
120
|
79.90
|
87.00
|
5.82
|
59.28
|
21.47
|
C
|
857
|
including
|
|
80.50
|
81.00
|
0.41
|
761.97
|
225.00
|
|
|
860-517-06
|
126
|
95.20
|
102.50
|
5.21
|
31.39
|
27.00
|
C
|
883
|
including
|
|
95.80
|
96.10
|
0.21
|
331.89
|
225.00
|
|
|
including
|
|
99.10
|
99.40
|
0.21
|
224.23
|
224.23
|
|
|
860-517-07
|
153
|
107.60
|
115.50
|
4.99
|
88.16
|
52.09
|
C
|
898
|
including
|
|
107.60
|
108.40
|
0.51
|
546.83
|
225.00
|
|
|
including
|
|
110.40
|
110.70
|
0.19
|
316.57
|
225.00
|
|
|
including
|
|
112.40
|
112.70
|
0.19
|
120.58
|
120.58
|
|
|
860-517-08
|
159
|
88.90
|
92.90
|
3.27
|
45.20
|
45.20
|
C
|
873
|
including
|
|
89.00
|
89.70
|
0.57
|
117.74
|
117.74
|
|
|
including
|
|
90.00
|
90.35
|
0.29
|
147.22
|
147.22
|
|
|
SOURCE Richmont Mines