Nano One Process Optimization Boosts Battery Power
April 12 2017 - 9:02AM
Dr. Stephen Campbell, Principal Scientist at Nano One Materials
(TSX-V:NNO) (Frankfurt:LBMB) (OTC:NNOMF), today announced process
improvements that further boost power and lower the cost for
lithium ion cathode materials.
Cannot view this image? Please
visit:https://orders.newsfilecorp.com/files/3606/26147_a1491985942782_4.jpg
Initial discharge curves showing improved
performance of High Voltage Spinel
(LiNi0.5Mn1.5O4)
using Nano One’s advanced and optimized process.
“I am pleased to report that recent optimization
of Nano One’s proprietary process adds to the high voltage spinel
improvements announced earlier this year,” said Dr Campbell. “The
Nano One process eliminates the 4-Volt plateau in the discharge
curve allowing the delivery of constant power across the whole
charge range. This is an important advantage for vehicle and
stationary energy storage applications as the higher voltage
reduces heating, aids durability and simplifies the power
management systems. In addition, the absence of cobalt and the use
of low cost lithium carbonate in our process directly address raw
material constraints in the supply chain.”
These technology advances were developed with
the ongoing support of the National Research Council of Canada
Industrial Research Assistance Program (NRC-IRAP) under the Cobalt
Free High Voltage Spinel project announced on June 30, 2016.
Dr. Campbell added “High-voltage spinel will be
a vital component of next generation high power batteries and with
the support of IRAP, Nano One is positioning its technology to play
a key role in the commercialization effort.”
Cannot view this image? Please
visit:https://orders.newsfilecorp.com/files/3606/26147_a1491985942892_59.jpg
Rate Capability chart showing energy
levels for Nano One’s HV-Spinel
(LiNi0.5Mn1.5O4)
and commercial grade NMC
(LiNi1/3Mn1/3Co1/3O2)
at different rates of discharge. Spinel retains more energy (i) at
higher rates of discharge and (ii) from cycle to
cycle.
Nano One Materials Corp.
Dan Blondal, CEO
For information with respect to Nano One or the contents of this
news release, please contact John Lando (President) at (604)
669-2701 or visit the website at www.nanoone.ca.
About Nano One:
Nano One Materials Corp (“Nano One” or “the
Company”) is developing patented technology for the low-cost
production of high performance battery materials used in electric
vehicles, energy storage and consumer electronics. The processing
technology addresses fundamental supply chain constraints by
enabling wider raw materials specifications for use in lithium ion
batteries. The process can be configured for a range of different
nanostructured materials and has the flexibility to shift with
emerging and future battery market trends and a diverse range of
other growth opportunities. The novel three-stage process uses
equipment common to industry and Nano One is building a pilot plant
to demonstrate high volume production. The pilot plant is being
funded with the assistance and support of Sustainable Development
Technology Canada (SDTC) and the Automotive Supplier Innovation
Program. Nano One also receives financial support from the National
Research Council of Canada Industrial Research Assistance Program
(NRC-IRAP). Nano One’s mission is to establish its patented
technology as a leading platform for the global production of a new
generation of nanostructured composite materials. For more
information, please visit www.nanoone.ca
Certain information contained herein may
constitute “forward-looking information” under Canadian securities
legislation. Forward-looking information includes, but is not
limited to, statements with respect to the actual receipt of the
grant monies, the execution of the Company’s plans which are
contingent on the receipt of such monies and the commercialization
of the Company’s technology and patents. Generally, forward-looking
information can be identified by the use of forward-looking
terminology such as 'believe', 'expect', 'anticipate', 'plan',
'intend', 'continue', 'estimate', 'may', 'will', 'should',
'ongoing', or variations of such words and phrases or statements
that certain actions, events or results “will” occur.
Forward-looking statements are based on the opinions and estimates
of management as of the date such statements are made and they are
subject to known and unknown risks, uncertainties and other factors
that may cause the actual results, level of activity, performance
or achievements of the Company to be materially different from
those expressed or implied by such forward-looking statements or
forward-looking information, including: the completion of final
documentation with SDTC and the receipt of all necessary regulatory
approvals. Although management of the Company has attempted to
identify important factors that could cause actual results to
differ materially from those contained in forward-looking
statements or forward-looking information, there may be other
factors that cause results not to be as anticipated, estimated or
intended. There can be no assurance that such statements will prove
to be accurate, as actual results and future events could differ
materially from those anticipated in such statements. Accordingly,
readers should not place undue reliance on forward-looking
statements and forward-looking information. The Company does not
undertake to update any forward-looking statements or
forward-looking information that is incorporated by reference
herein, except as required by applicable securities laws.
NEITHER THE TSX VENTURE EXCHANGE NOR ITS
REGULATION SERVICES PROVIDER (AS THAT TERM IS DEFINED IN THE
POLICIES OF THE TSX VENTURE EXCHANGE) ACCEPTS RESPONSIBILITY FOR
THE ADEQUACY OR ACCURACY OF THIS NEWS RELEASE
Nano One Materials (TSXV:NNO)
Historical Stock Chart
From Mar 2024 to Apr 2024
Nano One Materials (TSXV:NNO)
Historical Stock Chart
From Apr 2023 to Apr 2024