CHRS Coherus BioSciences Inc

RISK FACTORS

Investing in our common stock involves a high degree of risk. Before investing in our common stock, you should consider carefully the risks described below, together with the other information contained in this prospectus supplement or incorporated by reference in this prospectus supplement. If any of the risks set forth below occur, our business, financial condition, results of operations and future growth prospects could be materially and adversely affected. In these circumstances, the market price of our common stock could decline, and you may lose all or part of your investment.

Risks Related to Our Financial Condition and Capital Requirements

We have a limited operating history in an emerging regulatory environment on which to assess our business, have incurred significant losses since our inception and anticipate that we will continue to incur significant losses for the foreseeable future.

We are a biopharmaceutical company with a limited operating history in an emerging regulatory environment. We have incurred net losses in each year since our inception in September 2010, including net losses of $223.9 million and $87.2 million for the years ended December 31, 2015 and 2014, respectively, and $65.5 million and $40.8 million for the three months ended March 31, 2016 and 2015, respectively. As of March 31, 2016, we had an accumulated deficit of $475.4 million.

We have devoted substantially all of our financial resources to identify and develop our product candidates, including conducting, among other things, analytical characterization, process development and manufacturing, formulation and clinical studies, and providing general and administrative support for these operations. To date, we have financed our operations primarily through the sale of equity securities and convertible notes, as well as through our license agreements with Baxalta Incorporated, Baxalta US Inc., and Baxalta GmbH (collectively “Baxalta”), and Daiichi Sankyo Company, Limited, or Daiichi Sankyo. The amount of our future net losses will depend, in part, on the rate of our future expenditures and our ability to obtain funding through equity or debt financings or strategic collaborations. Biopharmaceutical product development is a highly speculative undertaking and involves a substantial degree of risk. We are in Phase 3 or other BLA-enabling clinical development with all three of our lead products, CHS-0214 (our etanercept (Enbrel) biosimilar candidate), CHS-1420 (our adalimumab (Humira) biosimilar candidate) and CHS-1701 (our pegfilgrastim (Neulasta) biosimilar candidate). It may be several years, if ever, before we complete Phase 3 or other BLA-enabling clinical trials and have a product candidate ready to file for market approval with the relevant regulatory agencies. If we obtain regulatory approval to market a biosimilar product candidate, our future revenue will depend upon the size of any markets in which our product candidates may receive approval and our ability to achieve sufficient market acceptance, pricing, reimbursement from third-party payors and adequate market share for our product candidates in those markets. However, even if one or more of our product candidates gain regulatory approval and are commercialized, we may never become profitable.

We expect to continue to incur significant expenses and increasing operating losses for the foreseeable future. We anticipate that our expenses will increase substantially if and as we:

S-14

Table of Contents

Further, the net losses we incur may fluctuate significantly from quarter-to-quarter and year-to-year such that a period-to-period comparison of our results of operations may not be a good indication of our future performance quarter-to-quarter and year-to-year due to factors including the timing of clinical trials, any litigation that we may initiate or that may be initiated against us, the execution of collaboration, licensing or other agreements and the timing of any payments we make or receive thereunder.

We have never generated any revenue from product sales and may never be profitable.

Although we have received upfront payments, milestone and other contingent payments and/or funding for development from some of our collaboration and license agreements (e.g., Baxalta and Daiichi Sankyo), we have no products approved for commercialization and have never generated any revenue from product sales. Our ability to generate revenue and achieve profitability depends on our ability, alone or with strategic collaboration partners, to successfully complete the development of, and obtain the regulatory and marketing approvals necessary to commercialize, one or more of our product candidates. We cannot predict when we will begin generating revenue from product sales, as this depends heavily on our success in many areas, including but not limited to:

S-15

Table of Contents

Even if one or more of the product candidates that we develop is approved for commercial sale, we anticipate incurring significant costs to commercialize any such product. Our expenses could increase beyond our expectations if we are required by the U.S. Food and Drug Administration, or the FDA, the European Medicines Agency, or the EMA, other regulatory agencies, domestic or foreign, or by any unfavorable outcomes in intellectual property litigation filed against us, to change our manufacturing processes or assays or to perform clinical, nonclinical or other types of studies in addition to those that we currently anticipate. In cases where we are successful in obtaining regulatory approvals to market one or more of our product candidates, our revenue will be dependent, in part, upon the size of the markets in the territories for which we gain regulatory approval, the number of biosimilar competitors in such markets, the accepted price for the product, the ability to get reimbursement at any price, the nature and degree of competition from originators and other biosimilar companies (including competition from large pharmaceutical companies entering the biosimilar market that may be able to gain advantages in the sale of biosimilar products based on brand recognition and/or existing relationships with customers and payors) and whether we own (or have partnered) the commercial rights for that territory. If the market for our product candidates (or our share of that market) is not as significant as we expect, the indication approved by regulatory authorities is narrower than we expect or the reasonably accepted population for treatment is narrowed by competition, physician choice or treatment guidelines, we may not generate significant revenue from sales of such products, even if approved. If we are unable to successfully complete development and obtain regulatory approval for our products, our business may suffer. Additionally, if we are not able to generate revenue from the sale of any approved products, we may never become profitable.

We expect that we will need to raise substantial additional funding. This additional funding may not be available on acceptable terms or at all. Failure to obtain this necessary capital when needed may force us to delay, limit or terminate our product development efforts or other operations.

We are currently advancing three product candidates through late-stage clinical development, which is expensive.

As of March 31, 2016, our cash and cash equivalents were $179.6 million. We expect that our existing cash and cash equivalents, together with funding we expect to receive under our license agreements with Daiichi Sankyo and Baxalta, and additional projected license agreements and the net proceeds of this offering, will be sufficient to fund our current operations for at least the next 12 months; however, we will require additional capital to obtain regulatory approval for, and to commercialize, our product candidates. In addition, our operating plans may change as a result of many factors that may currently be unknown to us, and we may need to seek additional funds sooner than planned. Our future funding requirements will depend on many factors, including but not limited to:

S-16

Table of Contents

Any additional fundraising efforts may divert our management from their day-to-day activities, which may adversely affect our ability to develop and commercialize our product candidates. In addition, we cannot guarantee that future financing will be available in sufficient amounts or on terms acceptable to us, if at all. Moreover, the terms of any financing may adversely affect the holdings or the rights of our stockholders, and the issuance of additional securities, whether equity or debt, by us or the possibility of such issuance may cause the market price of our shares to decline. The sale of additional equity or convertible securities would dilute the share ownership of our existing stockholders. The incurrence of indebtedness could result in increased fixed payment obligations and we may be required to agree to certain restrictive covenants, such as limitations on our ability to incur additional debt, limitations on our ability to acquire, sell or license intellectual property rights and other operating restrictions that could adversely impact our ability to conduct our business. We could also be required to seek funds through arrangements with collaborative partners or otherwise at an earlier stage than otherwise would be desirable and we may be required to relinquish rights to some of our technologies or product candidates or otherwise agree to terms unfavorable to us, any of which may have a material adverse effect on our business, operating results and prospects. Even if we believe we have sufficient funds for our current or future operating plans, we may seek additional capital if market conditions are favorable or for specific strategic considerations.

If we are unable to obtain funding on a timely basis, we may be required to significantly curtail, delay or discontinue one or more of our research or development programs or the commercialization of any product candidates or be unable to expand our operations or otherwise capitalize on our business opportunities, as desired, which could materially affect our financial condition and results of operations.

Risks Related to the Discovery and Development of Our Product Candidates

We are heavily dependent on the clinical success, regulatory approval and commercial success of our product candidates. We cannot give any assurance that any of our product candidates will receive regulatory approval, which is necessary before they can be commercialized.

To date, we have invested substantially all of our efforts and financial resources to identify, acquire and develop our product candidates. Our future success is dependent on our ability to develop, obtain regulatory approval for, and then commercialize and obtain adequate third party coverage and reimbursement for one or more product candidates. We currently do not have any approved products and generate no revenue from sales of any products, and we may never be able to develop or commercialize a marketable product.

Our product candidates are in varying stages of development and will require additional clinical development, management of nonclinical, clinical and manufacturing activities, regulatory approval, adequate manufacturing supplies, commercial organization and significant marketing efforts before we generate any revenue from product sales. CHS-1701, CHS-0214 and CHS-1420 have entered Phase 3 or BLA-enabling clinical development.

S-17

Table of Contents

Our clinical trials must use originator products as comparators, and such supplies may not be available on a timely basis to support such trials.

Although certain of our employees have prior experience with submitting marketing applications to the FDA or comparable foreign regulatory authorities, neither we nor our collaboration partners have submitted such applications for our product candidates. We cannot be certain that any of our product candidates will be successful in clinical trials or receive regulatory approval. Further, our product candidates may not receive regulatory approval even if they are successful in clinical trials. If we and our collaboration partners do not receive regulatory approvals for our product candidates, we may not be able to continue our operations.

We, together with our collaboration partners, generally plan to seek regulatory approval to commercialize our product candidates in the United States, the European Union, or E.U., and in additional foreign countries where we or our partners have commercial rights. To obtain regulatory approval, we and our collaboration partners must comply with numerous and varying regulatory requirements of such countries regarding safety, efficacy, chemistry, manufacturing and controls, clinical studies, commercial sales and pricing and distribution of our product candidates. Even if we and our collaboration partners are successful in obtaining approval in one jurisdiction, we cannot ensure that we will obtain approval in any other jurisdictions. If we and our collaboration partners are unable to obtain approval for our product candidates in multiple jurisdictions, our revenue and results of operations could be negatively affected.

The regulatory approval processes of the FDA, EMA and comparable foreign authorities are lengthy, time consuming and inherently unpredictable, and the regulatory approval requirements for biosimilars are evolving. If we and our collaboration partners are ultimately unable to obtain regulatory approval for our product candidates, our business will be substantially harmed.

The research, development, testing, manufacturing, labeling, packaging, approval, promotion, advertising, storage, marketing, distribution, post-approval monitoring and reporting and export and import of biologic products are subject to extensive regulation by the FDA and other regulatory authorities in the United States, by the EMA and EEA Competent Authorities in the European Economic Area, or EEA, and by other regulatory authorities in other countries, which regulations differ from country to country. Neither we nor any collaboration partner is permitted to market our product candidates in the United States until we and our collaboration partners receive approval from the FDA, or in the EEA until we and our collaboration partners receive E.U. Commission or EEA Competent Authority approvals.

The time required to obtain approval by the FDA and comparable foreign authorities is unpredictable, may take many years following the completion of clinical studies and depends upon numerous factors. In addition, approval policies, regulations or the type and amount of clinical data necessary to gain approval may change during the course of a product candidate’s clinical development and may vary among jurisdictions, which may cause delays in the approval or the decision not to approve an application. Neither we nor any collaboration partner has obtained regulatory approval for any of our product candidates, and it is possible that none of our current or future product candidates will ever obtain regulatory approval.

Applications for our product candidates could fail to receive regulatory approval for many reasons, including but not limited to the following:

S-18

Table of Contents

This approval process, as well as the unpredictability of the results of clinical studies, may result in our failure to obtain regulatory approval to market any of our product candidates, which would significantly harm our business. Any delays in the commencement or completion of clinical testing could significantly impact our product development costs and could result in the need for additional financing.

If we are not able to demonstrate biosimilarity of our biosimilar product candidates to the satisfaction of regulatory authorities, we will not obtain regulatory approval for commercial sale of our biosimilar product candidates and our future results of operations would be adversely affected.

Our future results of operations depend, to a significant degree, on our ability to obtain regulatory approval for and to commercialize our proposed biosimilar products. To obtain regulatory approval for the commercial sale of these product candidates, we will be required to demonstrate to the satisfaction of regulatory authorities, among other things, that our proposed biosimilar products are highly similar to biological reference products already licensed by the regulatory authority pursuant to marketing applications, notwithstanding minor differences in clinically inactive components, and that they have no clinically meaningful differences as compared to the marketed biological products in terms of the safety, purity and potency of the products. Each individual jurisdiction may apply different criteria to assess biosimilarity, based on a preponderance of the evidence that can be interpreted subjectively in some cases. In the EEA, the similar nature of a biosimilar and a reference product is demonstrated by comprehensive comparability studies covering quality, biological activity, safety and efficacy.

It is uncertain if regulatory authorities will grant the full originator label to biosimilar product candidates when they are approved. For example, an infliximab (Remicade) biosimilar molecule was approved in Europe and in the United States for the full originator label but received a much narrower originator label when approved in Canada. A similar outcome could occur with respect to one or more of our product candidates.

In the event that regulatory authorities require us to conduct additional clinical trials or other lengthy processes, the commercialization of our proposed biosimilar products could be delayed or prevented. Delays in the commercialization of or the inability to obtain regulatory approval for these products could adversely affect our operating results by restricting or significantly delaying our introduction of new biosimilars.

S-19

Table of Contents

The structure of complex proteins used in protein-based therapeutics is inherently variable and highly dependent on the processes and conditions used to manufacture them. If we are unable to develop manufacturing processes that achieve a requisite degree of biosimilarity to the originator drug, and within a range of variability considered acceptable by regulatory authorities, we may not be able to obtain regulatory approval for our products.

Protein-based therapeutics are inherently heterogeneous and their structures are highly dependent on the production process and conditions. Products from one production facility can differ within an acceptable range from those produced in another facility. Similarly, physicochemical differences can also exist among different lots produced within a single facility. The physicochemical complexity and size of biologic therapeutics create significant technical and scientific challenges in the context of their replication as biosimilar products.

The inherent variability in protein structure from one production lot to another is a fundamental consideration with respect to establishing biosimilarity to an originator product to support regulatory approval requirements. For example, the glycosylation of the protein, meaning the manner in which sugar molecules are attached to the protein backbone of a therapeutic protein when it is produced in a living cell, is critical to therapeutic efficacy, half-life (how long the drug stays in the body), efficacy and even safety of the therapeutic and is therefore a key consideration for biosimilarity. Defining and understanding the variability of an originator molecule in order to match its glycosylation profile requires significant skill in cell biology, protein purification and analytical protein chemistry. Furthermore, manufacturing proteins with reliable and consistent glycosylation profiles at scale is challenging and highly dependent on the skill of the cell biologist and process scientist.

There are extraordinary technical challenges in developing complex protein-based therapeutics that not only must achieve an acceptable degree of similarity to the originator molecule in terms of characteristics such as the unique glycosylation pattern , but also the ability to develop manufacturing processes that can replicate the necessary structural characteristics within an acceptable range of variability sufficient to satisfy regulatory authorities.

Given the challenges caused by the inherent variability in protein production, we may not be successful in developing our products if regulators conclude that we have not achieved a sufficient level of biosimilarity to the originator product, or that the processes we use are unable to generate our products within an acceptable range of variability.

Clinical drug development involves a lengthy and expensive process and we may encounter substantial delays in our clinical studies or may fail to demonstrate safety and efficacy to the satisfaction of applicable regulatory authorities.

Before obtaining marketing approval from regulatory authorities for the sale of our product candidates, we (and/or our collaboration partners) must conduct clinical studies to demonstrate the safety and efficacy of the product candidates in humans.

Clinical testing is expensive and can take many years to complete, and its outcome is inherently uncertain. Failure can occur at any time during the clinical study process. The results of preclinical studies and early clinical studies of our product candidates may not be predictive of the results of later-stage clinical studies. Product candidates that have shown promising results in early-stage clinical studies may still suffer significant setbacks in subsequent registration clinical studies. There is a high failure rate for product candidates proceeding through clinical studies, and product candidates in later stages of clinical studies may fail to show the desired safety and efficacy traits despite having progressed through preclinical studies and initial clinical studies. A number of companies in the biopharmaceutical industry have suffered significant setbacks in advanced clinical studies due to lack of efficacy or adverse safety profiles, notwithstanding promising results in earlier studies. Nonclinical and clinical data are also often susceptible to varying interpretations and analyses. We do not know whether any clinical studies we may conduct will demonstrate consistent or adequate efficacy and safety to obtain regulatory approval.

S-20

Table of Contents

We cannot guarantee that any clinical studies will be conducted as planned or completed on schedule, if at all. A failure of one or more clinical studies can occur at any stage of testing, and our future clinical studies may not be successful. Events that may prevent successful or timely completion of clinical development include but are not limited to:

Any inability to successfully complete nonclinical and clinical development could result in additional costs to us or impair our ability to generate revenue. In addition, if we make manufacturing or formulation changes to our product candidates, we may need to conduct additional studies to bridge our modified product candidates to earlier versions.

For example, we intend to alter the manufacturing processes for CHS-0214 and CHS-1420 and will need to provide data to the FDA and foreign regulatory authorities demonstrating that the change in manufacturing process has not changed the product candidate. If we are unable to make that demonstration to the FDA or comparable foreign regulatory authorities, we could face significant delays or fail to obtain regulatory approval to market the product, which could significantly harm our business.

S-21

Table of Contents

Our product candidates may cause undesirable side effects or have other properties that could delay or prevent their regulatory approval, limit the commercial profile of an approved label or result in significant negative consequences following marketing approval, if granted.

As with most pharmaceutical products, use of our product candidates could be associated with side effects or adverse events which can vary in severity (from minor reactions to death) and frequency (infrequent or prevalent). Side effects or adverse events associated with the use of our product candidates may be observed at any time, including in clinical trials or when a product is commercialized. Undesirable side effects caused by our product candidates could cause us or regulatory authorities to interrupt, delay or halt clinical studies and could result in a more restrictive label or the delay or denial of regulatory approval by the FDA or other comparable foreign authorities. Results of our studies could reveal a high and unacceptable severity and prevalence of side effects such as toxicity or other safety issues and could require us or our collaboration partners to perform additional studies or halt development or sale of these product candidates or expose us to product liability lawsuits which will harm our business. In such an event, we may be required by regulatory agencies to conduct additional animal or human studies regarding the safety and efficacy of our product candidates which we have not planned or anticipated or our studies could be suspended or terminated, and the FDA or comparable foreign regulatory authorities could order us to cease further development of or deny or withdraw approval of our product candidates for any or all targeted indications. There can be no assurance that we will resolve any issues related to any product-related adverse events to the satisfaction of the FDA or any other regulatory agency in a timely manner, if ever, which could harm our business, prospects and financial condition.

Additionally, product quality characteristics have been shown to be sensitive to changes in process conditions, manufacturing techniques, equipment or sites and other such related considerations, hence any manufacturing process changes we implement prior to or after regulatory approval could impact product safety and efficacy.

Drug-related side effects could affect patient recruitment for clinical trials, the ability of enrolled patients to complete our studies or result in potential product liability claims. We currently carry product liability insurance and we are required to maintain product liability insurance pursuant to certain of our license agreements. We believe our product liability insurance coverage is sufficient in light of our current clinical programs; however, we may not be able to maintain insurance coverage at a reasonable cost or in sufficient amounts to protect us against losses due to liability. A successful product liability claim or series of claims brought against us could adversely affect our results of operations and business. In addition, regardless of merit or eventual outcome, product liability claims may result in impairment of our business reputation, withdrawal of clinical study participants, costs due to related litigation, distraction of management’s attention from our primary business, initiation of investigations by regulators, substantial monetary awards to patients or other claimants, the inability to commercialize our product candidates and decreased demand for our product candidates, if approved for commercial sale.

Additionally, if one or more of our product candidates receives marketing approval, and we or others later identify undesirable side effects caused by such products, a number of potentially significant negative consequences could result, including but not limited to:

S-22

Table of Contents

Any of these events could prevent us from achieving or maintaining market acceptance of the particular product candidate, if approved, and could significantly harm our business, results of operations and prospects.

If we receive approval, regulatory agencies including the FDA and foreign regulatory agencies, regulations require that we report certain information about adverse medical events if those products may have caused or contributed to those adverse events. The timing of our obligation to report would be triggered by the date we become aware of the adverse event as well as the nature of the event. We may fail to report adverse events we become aware of within the prescribed timeframe. We may also fail to appreciate that we have become aware of a reportable adverse event, especially if it is not reported to us as an adverse event or if it is an adverse event that is unexpected or removed in time from the use of our products. If we fail to comply with our reporting obligations, the FDA or foreign regulatory agencies could take action including criminal prosecution, the imposition of civil monetary penalties, seizure of our products or delay in approval or clearance of future products.

The development, manufacture and commercialization of biosimilar products under various global regulatory pathways pose unique risks.

United States Regulatory Framework for Biosimilars

We and our collaboration partners intend to pursue market authorization globally. In the United States, an abbreviated pathway for approval of biosimilar products was established by the Biologics Price Competition and Innovation Act of 2009, or BPCIA, enacted on March 23, 2010, as part of the Patient Protection and Affordable Care Act. The BPCIA established this abbreviated pathway under section 351(k) of the Public Health Service Act, or PHSA. Subsequent to the enactment of the BPCIA, the FDA issued draft guidance regarding the demonstration of biosimilarity as well as the submission and review of biosimilar applications. Moreover, market acceptance of biosimilar products in the United States is unclear. Numerous states are considering or have already enacted laws that regulate or restrict the substitution by state pharmacies of biosimilars for originator products already licensed by the FDA. Market success of biosimilar products will depend on demonstrating to patients, physicians, payors and relevant authorities that such products are similar in quality, safety and efficacy as compared to the reference product.

We will continue to analyze and incorporate into our biosimilar development plans any final regulations issued by the FDA, pharmacy substitution policies enacted by state governments and other applicable requirements established by relevant authorities. The costs of development and approval, along with the probability of success for our biosimilar product candidates, will be dependent upon the application of any laws and regulations issued by the relevant regulatory authorities.

Biosimilar products may also be subject to extensive patent clearances and patent infringement litigation, which may delay and could prevent the commercial launch of a product. Moreover, the BPCIA prohibits the FDA from accepting an application for a biosimilar candidate to a reference product within four years of the reference product’s licensure by the FDA. In addition, the BPCIA provides innovative biologics with 12 years of exclusivity from the date of their licensure, during which time the FDA cannot approve any application for a biosimilar candidate to the reference product.

The BPCIA is complex and only beginning to be interpreted and implemented by the FDA. As a result, its ultimate impact, implementation and meaning are evolving and subject to significant uncertainty. Future implementation decisions by the FDA could result in delays in the development or commercialization of our product candidates or increased costs to assure regulatory compliance and could adversely affect our operating results by restricting or significantly delaying our ability to market new biosimilar products.

S-23

Table of Contents

Regulatory Framework for Biosimilars Outside the United States

In 2004, the European Parliament issued legislation allowing the approval of biosimilar therapeutics. Since then, the European Commission has granted marketing authorizations for more than 20 biosimilars pursuant to a set of general and product class-specific guidelines for biosimilar approvals issued over the past few years. Because of their extensive experience in the review and approval of biosimilars, Europe has more guidelines for these products than the FDA, including data requirements needed to support approval.

Under current EU regulations, an application for regulatory approval of a biosimilar drug cannot be submitted in the EU until expiration of an eight year data exclusivity period for the reference (originator) product, measured from the date of the reference product’s initial marketing authorization. Furthermore, once approved, the biosimilar cannot be marketed until expiration of a 10-year period following the initial marketing authorization of the reference product, such ten year period being extendible to 11 years if the reference product received approval of an additional therapeutic indication, within the first eight years following its initial marketing authorization, representing a significant clinical benefit in comparison with existing therapies. However, we understand that reference products approved prior to November 20, 2005 (which would include, for example, Enbrel, Humira and Neulasta, approved in the EU on March 2, 2000, August 9, 2003 and August 22, 2002, respectively) are subject to a 10 year period of data exclusivity. While the data exclusivity periods for Enbrel, Humira and Neulasta have now expired in Europe, these reference products are presently still subject to unexpired patents and such patents may or may not be susceptible to challenges to their validity and enforceability.

In Europe, the approval of a biosimilar for marketing is based on an opinion issued by the EMA and a decision issued by the European Commission. Therefore, the marketing approval will cover the entire EEA. However, substitution of a biosimilar for the originator is a decision that is made at the national level. Additionally, a number of countries do not permit the automatic substitution of biosimilars for the originator product. Therefore, even if we obtain marketing approval for the entire EEA, we may not receive substitution in one or more European nations, thereby restricting our ability to market our products in those jurisdictions.

Other regions, including Canada, Japan and Korea, also have their own legislation outlining a regulatory pathway for the approval of biosimilars. In some cases other countries have either adopted European guidance (Singapore and Malaysia) or are following guidance issued by the World Health Organization (Cuba and Brazil). While there is overlap in the regulatory requirements across regions, there are also some areas of non-overlap. Additionally, we cannot predict whether countries that we may wish to market in, which do not yet have an established or tested regulatory framework could decide to issue regulations or guidance and/or adopt a more conservative viewpoint than other regions. Therefore, it is possible that even if we obtain agreement from one health authority to an accelerated or optimized development plan, we will need to defer to the most conservative view to ensure global harmonization of the development plan. Also, for regions where regulatory authorities do not yet have sufficient experience in the review and approval of a biosimilar product, these authorities may rely on the approval from another region (e.g., the United States or the E.U.), which could delay our approval in that region. Finally, it is possible that some countries will not approve a biosimilar without clinical data from their population and/or may require that the biosimilar product be manufactured within their region.

If biosimilars of pegfilgrastim (Neulasta), etanercept (Enbrel) or adalimumab (Humira) are approved and successfully commercialized by others before our product candidates for these originator products (CHS-1701, CHS-0214 or CHS-1420, respectively), our business would suffer.

We expect other companies to seek approval to manufacture and market biosimilar versions of Neulasta, Enbrel, or Humira. If other biosimilars of Neulasta, Enbrel or Humira are approved and successfully commercialized before CHS-0214, CHS-1420 or CHS-1701, respectively, we may never achieve significant market share for these products, our revenue would be reduced and, as a result, our business, prospects and financial condition could suffer.

S-24

Table of Contents

If biosimilars of pegfilgrastim (Neulasta), etanercept (Enbrel) or adalimumab (Humira) developed by others are determined to be interchangeable and our biosimilars candidates for these originator products are not, our business would suffer.

The FDA or other relevant regulatory authorities may determine that a proposed biosimilar product is “interchangeable” with a reference product, meaning that the biosimilar product may be substituted for the reference product without the intervention of the health care provider who prescribed the reference product, if the application includes sufficient information to show that the product is biosimilar to the reference product and that it can be expected to produce the same clinical result as the reference product in any given patient. If the biosimilar product may be administered more than once to a patient, the applicant must demonstrate that the risk in terms of safety or diminished efficacy of alternating or switching between the biosimilar product candidate and the reference product is not greater than the risk of using the reference product without such alternation or switch. To make a final determination of interchangeability, regulatory authorities may require additional confirmatory information beyond what we plan to initially submit in our applications for approval, such as more in-depth analytical characterization, animal testing or further clinical studies. Provision of sufficient information for approval may prove difficult and expensive.

We cannot predict whether any of our biosimilar product candidates will meet regulatory authority requirements for approval not only as a biosimilar product but also as an interchangeable product in any jurisdiction. Furthermore, legislation governing interchangeability could differ by jurisdiction on a state or national level worldwide.

The concept of “interchangeability” is important because, in the United States for example, the first biosimilar determined to be interchangeable with a particular reference, or originator, product for any condition of use is eligible for a period of market exclusivity that delays an FDA determination that a second or subsequent biosimilar product is interchangeable with that originator product for any condition of use until the earlier of: (1) one year after the first commercial marketing of the first interchangeable product; (2) 18 months after resolution of a patent infringement suit instituted under 42 U.S.C. § 262(l)(6) against the applicant that submitted the application for the first interchangeable product, based on a final court decision regarding all of the patents in the litigation or dismissal of the litigation with or without prejudice; (3) 42 months after approval of the first interchangeable product, if a patent infringement suit instituted under 42 U.S.C. § 262(l)(6) against the applicant that submitted the application for the first interchangeable product is still ongoing; or (4) 18 months after approval of the first interchangeable product if the applicant that submitted the application for the first interchangeable product has not been sued under 42 U.S.C. § 262(l)(6). Thus, a determination that another company’s product is interchangeable with the originator biologic before we obtain approval of our corresponding biosimilar product candidates may delay the potential determination that our products are interchangeable with the originator product, which could materially adversely affect our results of operations and delay, prevent or limit our ability to generate revenue.

Failure to obtain regulatory approval in any targeted regulatory jurisdiction would prevent us from marketing our products to a larger patient population and reduce our commercial opportunities.

We and our collaboration partners have not initiated marketing efforts in any regulatory jurisdiction. Subject to product approvals and relevant patent expirations, we or our collaboration partners intend to market our etanercept (Enbrel) biosimilar product, CHS-0214 in Japan (through our licensee Daiichi Sankyo), Europe (through our licensee Baxalta) and certain Latin American countries (through our licensee, Orox). We intend to market our pegfilgrastim (Neulasta) biosimilar product, CHS-1701, and future oncology biosimilar candidates in the United States and may seek to partner commercially all of our oncology biosimilar candidates outside the United States. We intend to find strategic commercialization partners or retain rights for some or all of our immunology (anti-TNF) biosimilar candidates.

In order to market our products in the E.U., the United States and other jurisdictions, we and our collaboration partners must obtain separate regulatory approvals and comply with numerous and varying

S-25

Table of Contents

regulatory requirements. The EMA is responsible for the centralized procedure for the regulation and approval of human medicines. This procedure results in a single marketing authorization that is valid in all E.U. countries, as well as in Iceland, Liechtenstein and Norway. The time required to obtain approval abroad may differ from that required to obtain FDA approval. The foreign regulatory approval process may include all of the risks associated with obtaining FDA approval and we may not obtain foreign regulatory approvals on a timely basis, if at all. Approval by the FDA does not ensure approval by regulatory authorities in other countries, and approval by one foreign regulatory authority does not ensure approval by regulatory authorities in other foreign countries or by the FDA. We or our collaboration partners may not be able to file for regulatory approvals and may not receive necessary approvals to commercialize our products within the United States or in any market outside the United States. Failure to obtain these approvals would materially and adversely affect our business, financial condition and results of operations.

Even if we obtain regulatory approval for a product candidate, our products will remain subject to regulatory scrutiny.

If our product candidates are approved, they will be subject to ongoing regulatory requirements for manufacturing, labeling, packaging, storage, advertising, promotion, sampling, record-keeping, conduct of post-marketing studies and submission of safety, efficacy and other post-market information, including both federal and state requirements in the United States and requirements of comparable foreign regulatory authorities.

Manufacturers and manufacturers’ facilities are required to comply with extensive FDA, and comparable foreign regulatory authority, requirements, including ensuring that quality control and manufacturing procedures conform to current Good Manufacturing Practices, or cGMP, regulations. As such, we and our contract manufacturers will be subject to continual review and inspections to assess compliance with cGMP and adherence to commitments made in any NDA, BLA or marketing authorization application, or MAA. Accordingly, we and others with whom we work must continue to expend time, money and effort in all areas of regulatory compliance, including manufacturing, production and quality control.

Any regulatory approvals that we or our collaboration partners receive for our product candidates may be subject to limitations on the approved indicated uses for which the product may be marketed or to the conditions of approval or may contain requirements for potentially costly additional clinical trials and surveillance to monitor the safety and efficacy of the product candidate. We will be required to report certain adverse events and production problems, if any, to the FDA and comparable foreign regulatory authorities. Any new legislation addressing drug safety issues could result in delays in product development or commercialization or increased costs to assure compliance. We will have to comply with requirements concerning advertising and promotion for our products. Promotional communications with respect to prescription drugs are subject to a variety of legal and regulatory restrictions and must be consistent with the information in the product’s approved label. As such, we may not promote our products for indications or uses for which they do not have approval. If our product candidates are approved, we must submit new or supplemental applications and obtain approval for certain changes to the approved products, product labeling or manufacturing process. We or our collaboration partners could also be asked to conduct post-marketing clinical studies to verify the safety and efficacy of our products in general or in specific patient subsets. If original marketing approval is obtained via an accelerated biosimilar approval pathway, we could be required to conduct a successful post-marketing clinical study to confirm clinical benefit for our products. An unsuccessful post-marketing study or failure to complete such a study could result in the withdrawal of marketing approval.

S-26

Table of Contents

If a regulatory agency discovers previously unknown problems with a product, such as adverse events of unanticipated severity or frequency or problems with the facility where the product is manufactured or disagrees with the promotion, marketing or labeling of a product, such regulatory agency may impose restrictions on that product or us, including requiring withdrawal of the product from the market. If we fail to comply with applicable regulatory requirements, a regulatory agency or enforcement authority may, among other possibilities:

Any government investigation of alleged violations of law could require us to expend significant time and resources in response and could generate negative publicity. Any failure to comply with ongoing regulatory requirements may significantly and adversely affect our ability to commercialize and generate revenue from our products. If regulatory sanctions are applied or if regulatory approval is withdrawn, the value of our company and our operating results will be adversely affected.

Adverse events involving an originator product, or other biosimilars of such originator product, may negatively affect our business.

In the event that use of an originator product, or other biosimilar for such originator product, results in unanticipated side effects or other adverse events, it is likely that our biosimilar product candidate will be viewed comparably and may become subject to the same scrutiny and regulatory sanctions as the originator product or other biosimilar, as applicable. Accordingly, we may become subject to regulatory supervisions, clinical holds, product recalls or other regulatory actions for matters outside of our control that affect the originator product, or other biosimilar, as applicable, if and until we are able to demonstrate to the satisfaction of our regulators that our biosimilar product candidate is not subject to the same issues leading to the regulatory action as the originator product or other biosimilar, as applicable.

Risks Related to our Ability to Hire Highly Qualified Personnel and our Reliance on Third Parties

We are highly dependent on the services of our key executives and personnel, including our President and Chief Executive Officer, Dennis M. Lanfear, and if we are not able to retain these members of our management or recruit additional management, clinical and scientific personnel, our business will suffer.

We are highly dependent on the principal members of our management and scientific and technical staff. The loss of service of any of our management or key scientific and technical staff could harm our business. In addition, we are dependent on our continued ability to attract, retain and motivate highly qualified additional management, clinical and scientific personnel. If we are not able to retain our management, particularly our President and Chief Executive Officer, Mr. Lanfear, and to attract, on acceptable terms, additional qualified personnel necessary for the continued development of our business, we may not be able to sustain our operations or grow.

Our future performance will also depend, in part, on our ability to successfully integrate newly hired executive officers into our management team and our ability to develop an effective working relationship among senior management. Our failure to integrate these individuals and create effective working relationships among them and other members of management could result in inefficiencies in the development and commercialization

S-27

Table of Contents

of our product candidates, harming future regulatory approvals, sales of our product candidates and our results of operations. Additionally, we do not maintain “key person” life insurance on the lives of our executives or any of our employees.

We will need to expand and effectively manage our managerial, scientific, operational, financial and other resources in order to successfully pursue our clinical development and commercialization efforts. Our success also depends on our continued ability to attract, retain and motivate highly qualified management and scientific personnel. We may not be able to attract or retain qualified management and scientific and clinical personnel in the future due to the intense competition for qualified personnel among biotechnology, pharmaceutical and other businesses, particularly in the San Francisco Bay Area. If we are not able to attract, retain and motivate necessary personnel to accomplish our business objectives, we may experience constraints that will significantly impede the achievement of our development objectives, our ability to raise additional capital and our ability to implement our business strategy.

We will need to expand our organization and we may experience difficulties in managing this growth, which could disrupt our operations.

As of March 31, 2016, we had 115 full-time employees. As our development and commercialization plans and strategies develop, we expect to need additional managerial, operational, sales, marketing, financial, legal and other resources. Our management may need to divert a disproportionate amount of its attention away from our day-to-day activities and devote a substantial amount of time to managing these growth activities. We may not be able to effectively manage the expansion of our operations, which may result in weaknesses in our infrastructure, operational mistakes, loss of business opportunities, loss of employees and reduced productivity among remaining employees. Our expected growth could require significant capital expenditures and may divert financial resources from other projects, such as the development of our current and potential future product candidates. If our management is unable to effectively manage our growth, our expenses may increase more than expected, our ability to generate and/or grow revenue could be reduced and we may not be able to implement our business strategy. Our future financial performance and our ability to commercialize product candidates and compete effectively will depend, in part, on our ability to effectively manage any future growth.

We rely on third parties to conduct our nonclinical and clinical studies and perform other tasks for us. If these third parties do not successfully carry out their contractual duties, meet expected deadlines or comply with regulatory requirements, we may not be able to obtain regulatory approval for or commercialize our product candidates and our business could be substantially harmed.

We have relied upon and plan to continue to rely upon third-party CROs to monitor and manage data for our ongoing nonclinical and clinical programs. We rely on these parties for execution of our nonclinical and clinical studies and control only certain aspects of their activities. Nevertheless, we are responsible for ensuring that each of our studies is conducted in accordance with the applicable protocol, legal, regulatory and scientific standards and our reliance on the CROs does not relieve us of our regulatory responsibilities. We and our CROs and other vendors are required to comply with cGMP, current good clinical practices, or cGCP, and Good Laboratory Practices, or GLP, which are regulations and guidelines enforced by the FDA, the Competent Authorities of the Member States of the EEA and comparable foreign regulatory authorities for all of our product candidates in clinical development. Regulatory authorities enforce these regulations through periodic inspections of study sponsors, principal investigators, study sites and other contractors. If we, any of our CROs, service providers or investigators fail to comply with applicable regulations or cGCPs, the data generated in our nonclinical and clinical studies may be deemed unreliable and the FDA, EMA or comparable foreign regulatory authorities may require us to perform additional nonclinical and clinical studies before approving our marketing applications. We cannot assure you that upon inspection by a given regulatory authority, such regulatory authority will determine that any of our clinical studies comply with cGCP regulations. In addition, our clinical studies must be conducted with product generated under cGMP regulations. Failure to comply by any of the participating parties or ourselves with these regulations may require us to repeat clinical studies, which would delay the regulatory

S-28

Table of Contents

approval process. Moreover, our business may be implicated if our contract research organization, or CRO, or any other participating parties violate federal or state fraud and abuse or false claims laws and regulations or healthcare privacy and security laws.

If any of our relationships with these third-party CROs terminate, we may not be able to enter into arrangements with alternative CROs or do so on commercially reasonable terms. In addition, our CROs are not our employees, and except for remedies available to us under our agreements with such CROs, we cannot control whether or not they devote sufficient time and resources to our on-going nonclinical and clinical programs. If CROs do not successfully carry out their contractual duties or obligations or meet expected deadlines, if they need to be replaced or if the quality or accuracy of the data they obtain is compromised due to the failure to adhere to our protocols, regulatory requirements or for other reasons, our clinical studies may be extended, delayed or terminated and we may not be able to obtain regulatory approval for or successfully commercialize our product candidates. CROs may also generate higher costs than anticipated. As a result, our results of operations and the commercial prospects for our product candidates would be harmed, our costs could increase and our ability to generate revenue could be delayed.

Switching or adding additional CROs involves additional cost and requires management time and focus. In addition, a transition period is necessary when a new CRO commences work, which can materially impact our ability to meet our desired clinical development timelines. Though we strive to carefully manage our relationships with our CROs, there can be no assurance that we will not encounter similar challenges or delays in the future or that these delays or challenges will not have a material adverse impact on our business, prospects and financial condition.

We rely on third parties, and in some cases a single third party, to manufacture nonclinical and clinical supplies of our product candidates and to store critical components of our product candidates for us. Our business could be harmed if those third parties fail to provide us with sufficient quantities of product candidates or fail to do so at acceptable quality levels or prices.

We do not currently have the infrastructure or capability internally to manufacture supplies of our product candidates for use in our nonclinical and clinical studies, and we lack the resources and the capability to manufacture any of our product candidates on a clinical or commercial scale. We rely on third party manufacturers to manufacture and supply us with our product candidates for our preclinical and clinical studies. Successfully transferring complicated manufacturing techniques to contract manufacturing organizations and scaling up these techniques for commercial quantities is time consuming and we may not be able to achieve such transfer or do so in a timely manner. Moreover, the availability of contract manufacturing services for protein-based therapeutics is highly variable and there are periods of relatively abundant capacity alternating with periods in which there is little available capacity.

If our need for contract manufacturing services increases during a period of industry-wide production capacity shortage, we may not be able to produce our product candidates on a timely basis or on commercially viable terms. Although we will plan accordingly and generally do not begin a clinical study unless we believe we have a sufficient supply of a product candidate to complete such study, any significant delay or discontinuation in the supply of a product candidate for an ongoing clinical study due to the need to replace a third-party manufacturer could considerably delay completion of our clinical studies, product testing and potential regulatory approval of our product candidates, which could harm our business and results of operations.

Reliance on third-party manufacturers entails additional risks, including reliance on the third party for regulatory compliance and quality assurance, the possible breach of the manufacturing agreement by the third party and the possible termination or nonrenewal of the agreement by the third party at a time that is costly or inconvenient for us. In addition, third party manufacturers may not be able to comply with cGMP or similar regulatory requirements outside the United States. Our failure or the failure of our third party manufacturers to

S-29

Table of Contents

comply with applicable regulations could result in sanctions being imposed on us, including fines, injunctions, civil penalties, delays, suspension or withdrawal of approvals, license revocation, seizures or recalls of products, operating restrictions and criminal prosecutions, any of which could significantly and adversely affect supplies of our product candidates or any other product candidates or products that we may develop. Any failure or refusal to supply the components for our product candidates that we may develop could delay, prevent or impair our clinical development or commercialization efforts. If our contract manufacturers were to breach or terminate their manufacturing arrangements with us, the development or commercialization of the affected products or product candidates could be delayed, which could have an adverse effect on our business. Any change in our manufacturers could be costly because the commercial terms of any new arrangement could be less favorable and because the expenses relating to the transfer of necessary technology and processes could be significant.

If any of our product candidates are approved, in order to produce the quantities necessary to meet anticipated market demand, any contract manufacturer that we engage may need to increase manufacturing capacity. If we are unable to build and stock our product candidates in sufficient quantities to meet the requirements for the launch of these candidates or to meet future demand, our revenue and gross margins could be adversely affected. Although we believe that we will not have any material supply issues, we cannot be certain that we will be able to obtain long-term supply arrangements for our product candidates or materials used to produce them on acceptable terms, if at all. If we are unable to arrange for third-party manufacturing, or to do so on commercially reasonable terms, we may not be able to complete development of our product candidates or market them.

We have entered into collaborations with third parties in connection with the development of certain of our product candidates. Even if we believe that the development of our technology and product candidates is promising, our partners may choose not to proceed with such development.

We have collaborations with several partners for the development and commercialization of certain of our product candidates. Our existing agreements with our collaboration partners are generally subject to termination by the counterparty on short notice under certain circumstances. Accordingly, even if we believe that the development of certain product candidates is worth pursuing, our partners may choose not to continue with such development. If any of our collaborations are terminated, we may be required to devote additional resources to the development of our product candidates or seek a new collaboration partner on short notice, and the terms of any additional collaborations or other arrangements that we establish may not be favorable to us or available at all.

We are also at risk that our collaborations or other arrangements may not be successful. Factors that may affect the success of our collaborations include the following:

S-30

Table of Contents

In addition, in January 2016, Baxalta announced that it had reached an agreement under which Shire plc will combine with Baxalta. This combination, if consummated, could affect the future of our collaboration with Baxalta in a manner that is unfavorable to us.

If we cannot maintain successful collaborations, our business, financial condition and operating results may be adversely affected.

We are dependent on Daiichi Sankyo, Baxalta and Orox for the commercialization of our biosimilar product candidates in certain major markets, and their failure to commercialize in those markets could have a material adverse effect on our business and operating results.

Our exclusive licensee, Baxalta, is responsible for commercialization of CHS-0214 in Europe, Brazil and other jurisdictions outside the U.S. (excluding Japan and certain Caribbean and Latin American countries). Our exclusive licensee, Daiichi Sankyo, is responsible for commercialization of CHS-0214 in Japan. Our exclusive licensee, Orox Pharmaceuticals B.V., or Orox, is responsible for commercialization of certain of our products, including CHS-1701, CHS-0214 and CHS-1420, in certain Caribbean and Latin American countries (excluding Brazil). If these entities fail to exercise commercially reasonable efforts to market and sell our products in their respective licensed jurisdictions or are otherwise ineffective in doing so, our business will be harmed and we may not be able to adequately remedy the harm through negotiation, litigation, arbitration or termination of the license agreements. Moreover, any disputes with our collaboration partners concerning the adequacy of their commercialization efforts will substantially divert the attention of our senior management from other business activities and will require us to incur substantial costs associated with litigation or arbitration proceedings.

We are subject to a multitude of manufacturing risks. Any adverse developments affecting the manufacturing operations of our biosimilar product candidates could substantially increase our costs and limit supply for our product candidates.

The process of manufacturing our product candidates is complex, highly regulated and subject to several risks, including but not limited to:

Even minor deviations from normal manufacturing processes for any of our product candidates could result in reduced production yields, product defects and other supply disruptions. For example, we have experienced failures with respect to the manufacturing of certain lots of each of our product candidates resulting in delays prior to our taking corrective action. Additionally, if microbial, viral or other contaminations are discovered in our product candidates or in the manufacturing facilities in which our product candidates are made, such manufacturing facilities may need to be closed for an extended period of time to investigate and remedy the contamination.

For example, in October 2014, as part of our quality process and upon routine visual inspection during storage, four syringes containing CHS-0214 (our etanercept (Enbrel) biosimilar candidate) from a production lot in use in our Phase 3 clinical trials were observed to contain small dark particles. We immediately initiated a visual inspection of remaining unlabeled inventory of this lot as well as a subsequent lot. While none of the approximately 8,000 unlabeled syringes inspected exhibited any such particulate, we decided in the interests of patient safety to temporarily stop dosing in the Phase 3 clinical trials of CHS-0214 in order to determine a potential cause and incidence of the observed phenomenon. Based on our investigation, including a chemical analysis of the particles by a qualified independent laboratory, we concluded that the particulates did not result from any instability in the CHS-0214 protein product or its formulation, but were most likely a result of a non-

S-31

Table of Contents

recurring anomaly related to first use of new process equipment. We therefore concluded that the approximately 7,000 unlabeled syringes that were 100% inspected and found free of any particulates were safe for patient use in our clinical trials. In consultation with the FDA, our Phase 3 trials resumed in December 2014. We completed two Phase 3 clinical trials with CHS-0214 in rheumatoid arthritis and psoriasis, which met their primary clinical endpoints in November 2015 and January 2016, respectively.

Any adverse developments affecting manufacturing operations for our product candidates may result in shipment delays, inventory shortages, lot failures, withdrawals or recalls or other interruptions in the supply of our product candidates. We may also have to take inventory write-offs and incur other charges and expenses for product candidates that fail to meet specifications, undertake costly remediation efforts or seek more costly manufacturing alternatives.

We currently engage single suppliers for manufacture, clinical trial services, formulation development and product testing of our product candidates. The loss of any of these suppliers or vendors could materially and adversely affect our business.

For each of our lead products, CHS-1701, CHS-0214 and CHS-1420, we currently engage a distinct vendor or service provider for each of the principal activities supporting our manufacture and development of these lead products, such as manufacture of the biological substance present in each of the products, manufacture of the final filled and finished presentation of these products, as well as laboratory testing, formulation development and clinical testing of these products. Because we currently have not engaged back up suppliers or vendors for these single-sourced services, and although we believe that there are alternate sources that could fulfill these activities, we cannot assure you that identifying and establishing relationships with alternate suppliers and vendors would not result in significant delay in the development of our product candidates. Additionally, we may not be able to enter into arrangements with alternative service providers on commercially reasonable terms or at all. A delay in the development of our product candidates, or having to enter into a new agreement with a different third party on less favorable terms than we have with our current suppliers, could have a material adverse impact on our business.

We and our collaboration partners and contract manufacturers are subject to significant regulation with respect to manufacturing our product candidates. The manufacturing facilities on which we rely may not continue to meet regulatory requirements or may not be able to meet supply demands.

All entities involved in the preparation of therapeutics for clinical studies or commercial sale, including our existing contract manufacturers for our product candidates, are subject to extensive regulation. Components of a finished therapeutic product approved for commercial sale or used in late-stage clinical studies must be manufactured in accordance with cGMP. These regulations govern manufacturing processes and procedures (including record keeping) and the implementation and operation of quality systems to control and assure the quality of investigational products and products approved for sale. Poor control of production processes can lead to the introduction of contaminants or to inadvertent changes in the properties or stability of our product candidates that may not be detectable in final product testing. We, our collaboration partners or our contract manufacturers must supply all necessary documentation in support of a BLA or MAA on a timely basis and must adhere to GLP and cGMP regulations enforced by the FDA and other regulatory agencies through their facilities inspection program. Some of our contract manufacturers may have never produced a commercially approved pharmaceutical product and therefore have not obtained the requisite regulatory authority approvals to do so. The facilities and quality systems of some or all of our collaboration partners and third-party contractors must pass a pre-approval inspection for compliance with the applicable regulations as a condition of regulatory approval of our product candidates or any of our other potential products. In addition, the regulatory authorities may, at any time, audit or inspect a manufacturing facility involved with the preparation of our product candidates or our other potential products or the associated quality systems for compliance with the regulations applicable to the activities being conducted. Although we oversee the contract manufacturers, we cannot control the manufacturing process of, and are completely dependent on, our contract manufacturing partners for compliance

S-32

Table of Contents

with the regulatory requirements. If these facilities do not pass a pre-approval plant inspection, regulatory approval of the products may not be granted or may be substantially delayed until any violations are corrected to the satisfaction of the regulatory authority, if ever.

The regulatory authorities also may, at any time following approval of a product for sale, audit the manufacturing facilities of our collaboration partners and third-party contractors. If any such inspection or audit identifies a failure to comply with applicable regulations or if a violation of our product specifications or applicable regulations occurs independent of such an inspection or audit, we or the relevant regulatory authority may require remedial measures that may be costly and/or time consuming for us or a third party to implement and that may include the temporary or permanent suspension of a clinical study or commercial sales or the temporary or permanent closure of a facility. Any such remedial measures imposed upon us or third parties with whom we contract could materially harm our business.

If we, our collaboration partners or any of our third-party manufacturers fail to maintain regulatory compliance, the FDA or other applicable regulatory authority can impose regulatory sanctions including, among other things, refusal to approve a pending application for a new product candidate, withdrawal of an approval or suspension of production. As a result, our business, financial condition and results of operations may be materially harmed.

Additionally, if supply from one approved manufacturer is interrupted, an alternative manufacturer would need to be qualified through a BLA supplement or MAA variation or equivalent foreign regulatory filing, which could result in further delay. The regulatory agencies may also require additional studies if a new manufacturer is relied upon for commercial production. Switching manufacturers may involve substantial costs and is likely to result in a delay in our desired clinical and commercial timelines.

These factors could cause us to incur additional costs and could cause the delay or termination of clinical studies, regulatory submissions, required approvals or commercialization of our product candidates. Furthermore, if our suppliers fail to meet contractual requirements and we are unable to secure one or more replacement suppliers capable of production at a substantially equivalent cost, our clinical studies may be delayed or we could lose potential revenue.

Our reliance on third parties requires us to share our trade secrets, which increases the possibility that a competitor will discover them or that our trade secrets will be misappropriated or disclosed.

Because we rely on third parties to develop and manufacture our product candidates, we must, at times, share trade secrets with them. We seek to protect our proprietary technology in part by entering into confidentiality agreements and, if applicable, material transfer agreements, collaborative research agreements, consulting agreements or other similar agreements with our collaboration partners, advisors, employees and consultants prior to beginning research or disclosing proprietary information. These agreements typically limit the rights of the third parties to use or disclose our confidential information, such as trade secrets. Despite the contractual provisions employed when working with third parties, the need to share trade secrets and other confidential information increases the risk that such trade secrets become known by our competitors, are inadvertently incorporated into the technology of others or are disclosed or used in violation of these agreements. Given that our proprietary position is based, in part, on our know-how and trade secrets, a competitor’s discovery of our trade secrets or other unauthorized use or disclosure would impair our competitive position and may have a material adverse effect on our business.

S-33

Table of Contents

Risks Related to Commercialization of Our Product Candidates

Our biosimilar product candidates, if approved, will face significant competition from the reference products and from other pharmaceuticals approved for the same indication as the originator products. Our failure to effectively compete may prevent us from achieving significant market penetration and expansion.

We expect to enter highly competitive pharmaceutical markets. Successful competitors in the pharmaceutical market have demonstrated the ability to effectively discover, obtain patents, develop, test and obtain regulatory approvals for products, as well as an ability to effectively commercialize, market and promote approved products. Numerous companies, universities and other research institutions are engaged in developing, patenting, manufacturing and marketing of products competitive with those that we are developing. Many of these potential competitors are large, experienced pharmaceutical companies that enjoy significant competitive advantages, such as substantially greater financial, research and development, manufacturing, personnel and marketing resources. These companies also have greater brand recognition and more experience in conducting preclinical testing and clinical trials of product candidates and obtaining FDA and other regulatory approvals of products.

If an improved version of an originator product, such as Enbrel, Humira or Neulasta, is developed or if the market for the originator product significantly declines, sales or potential sales of our biosimilar product candidates may suffer.

Originator companies may develop improved versions of a reference product as part of a life cycle extension strategy and may obtain regulatory approval of the improved version under a new or supplemental BLA filed with the applicable regulatory authority. Should the originator company succeed in obtaining an approval of an improved biologic product, it may capture a significant share of the collective reference product market in the applicable jurisdiction and significantly reduce the market for the reference product and thereby the potential size of the market for our biosimilar product candidates. In addition, the improved product may be protected by additional patent rights that may subject our follow-on biosimilar to claims of infringement.

Biologic reference products may also face competition as technological advances are made that may offer patients a more convenient form of administration or increased efficacy or as new products are introduced. As new products are approved that compete with the reference product to our biosimilar product candidates, or sales of the reference originator products may be adversely impacted or rendered obsolete. If the market for the reference product is impacted, we may lose significant market share or experience limited market potential for our approved biosimilar products or product candidates, and the value of our product pipeline could be negatively impacted. As a result of the above factors, our business, prospects and financial condition could suffer.

If efforts by manufacturers of originator products to delay or limit the use of biosimilars are successful, our sales of biosimilar products may suffer.

Many manufacturers of originator products have increasingly used legislative, regulatory and other means, such as litigation, to delay regulatory approval and to seek to restrict competition from manufacturers of biosimilars. These efforts may include or have included:

S-34

Table of Contents

In 2012, Abbott Laboratories filed a Citizen Petition with the FDA asking the agency to refrain from accepting biosimilar applications under the BPCIA arguing that to approve such applications, without compensation to the originator, would constitute an unconstitutional taking of an originator company’s valuable trade secrets under the fifth amendment of the United States constitution. The FDA has not yet acted on this petition and its outcome is uncertain. If the FDA grants Abbott Laboratories’ petition, we may be precluded from applying for approval of CHS-1701, CHS-0214 and CHS-1420 under the 351(k) pathway. Even if the FDA rejects Abbott Laboratories’ petition, we think it is likely that Abbott will file appeals to the federal courts and ultimately pursue its appeals to the United States Supreme Court. Other originator companies may file Citizen Petitions in an effort to restrict or prevent the introduction of biosimilars.

We face intense competition and rapid technological change and the possibility that our competitors may develop therapies that are similar, more advanced or more effective than ours, which may adversely affect our financial condition and our ability to successfully commercialize our product candidates.

We have competitors both in the United States and internationally, including major multinational pharmaceutical companies, specialty pharmaceutical companies and biotechnology companies. Some of the pharmaceutical and biotechnology companies we expect to compete with include, for example, Apotex Inc., or Apotex, Sandoz International GmbH, or Sandoz, Amgen, Pfizer Inc., or Pfizer, Boehringer Ingelheim GmbH, or Boehringer, Teva Pharmaceutical Industries, Ltd., or Teva, and Samsung Bioepis, Ltd., or Samsung Bioepis, (a Merck/Biogen/Samsung biosimilar venture), as well as other smaller companies. We are currently aware that such competitors are engaged in the development of biosimilar product candidates to pegfilgrastim (Neulasta), etanercept (Enbrel) and adalimumab (Humira). For example, we understand that Sandoz and Apotex have each submitted a Neulasta (pegfilgrastim) biosimilar product candidate for market approval in the United States. We understand that Mylan Inc. appears to have an ongoing Phase 3 clinical trial for a Neulasta biosimilar. Similarly, we understand that Sandoz and Samsung Bioepis are each currently engaged in the development of competing biosimilar product candidates for etanercept (Enbrel). Both Sandoz and Samsung Bioepis have each submitted an etanercept biosimilar product candidate for market approval in the E.U. and Sandoz has filed a BLA for its candidate in the United States. On January 16, 2016, the European Commission (EC) approved Samsung Bioepis’ entanercept biosimilar (Benepali), also known as SB4, for the treatment of rheumatoid arthritis, psoriatic arthritis, axial spondyloarthritis (ankylosing spondylitis and non-radiographic axial spondyloarthritis) and plaque psoriasis. Boehringer, Amgen, Sandoz, Samsung Bioepis and Pfizer are examples of companies engaged in development of biosimilar product candidates for adalimumab (Humira). We understand Boehringer Ingelheim’s program and Pfizer’s program are in Phase 3, and that Amgen’s program has successfully completed Phase 3. On November 25, 2015, Amgen announced the submission with the FDA of a BLA for its adalimumab (Humira) biosimilar, ABP 501.

S-35

Table of Contents

Many of our competitors have substantially greater financial, technical and other resources, such as larger research and development staff and experienced marketing and manufacturing organizations. Additional mergers and acquisitions in the pharmaceutical industry may result in even more resources being concentrated in our competitors. As a result, these companies may obtain regulatory approval more rapidly than we are able to and may be more effective in selling and marketing their products. Smaller or early-stage companies may also prove to be significant competitors, particularly through collaborative arrangements with large, established companies. Our competitors may succeed in developing, acquiring or licensing on an exclusive basis, products that are more effective or less costly than any product candidate that we may develop; they may also obtain patent protection that could block our products; and they may obtain regulatory approval, product commercialization and market penetration earlier than we do. Biosimilar product candidates developed by our competitors may render our potential product candidates uneconomical, less desirable or obsolete, and we may not be successful in marketing our product candidates against competitors. Competitors may also assert in their marketing or medical education programs that their biosimilar products demonstrate a higher degree of biosimilarity to the originator products than do ours or other competitor’s biosimilar products, thereby seeking to influence health care practitioners to select their biosimilar products, versus ours or other competitors.

We currently have no marketing and sales organization. If we are unable to establish sales and marketing capabilities in jurisdictions for which we choose to retain commercialization rights or if we are unable to enter into agreements with third parties to market and sell our product candidates, we may be unable to generate any revenue.

We currently have no marketing or sales organization. Although our employees may have sold other biologic products in the past while employed at other companies, our products have not yet been approved for sale, and thus we as a company have no experience selling and marketing our product candidates. To successfully commercialize any products that may result from our development programs, we will need to develop these capabilities, either on our own or with others. If our product candidates receive regulatory approval, we intend to establish a sales and marketing organization with technical expertise and supporting distribution capabilities to commercialize our product candidates in major markets where we may choose to retain commercialization rights. Doing so will be expensive, difficult and time consuming. Any failure or delay in the development of our internal sales, marketing and distribution capabilities would adversely impact the commercialization of our products.

Further, given our lack of prior experience in marketing and selling biopharmaceutical products, our initial estimate of the size of the required sales force may be materially more or less than the size of the sales force actually required to effectively commercialize our product candidates. As such, we may be required to hire substantially more sales representatives to adequately support the commercialization of our product candidates or we may incur excess costs as a result of hiring more sales representatives than necessary. With respect to certain geographical markets, we may enter into collaborations with other entities to utilize their local marketing and distribution capabilities, but we may be unable to enter into such agreements on favorable terms, if at all. If our future collaboration partners do not commit sufficient resources to commercialize our future products, if any, and we are unable to develop the necessary marketing capabilities on our own, we will be unable to generate sufficient product revenue to sustain our business. We expect competition from companies such as Sandoz, Samsung Bioepis, Teva, Boehringer, Pfizer and Amgen that currently have extensive and well-funded marketing and sales operations. Without an internal team or the support of a third party to perform marketing and sales functions, we may be unable to compete successfully against these more established companies.

We may need to enter into alliances with other companies that can provide capabilities and funds for the development and commercialization of our product candidates. If we are unsuccessful in forming or maintaining these alliances on favorable terms, our business could be adversely affected.

Because we have limited or no internal capabilities for late-stage product development, manufacturing, sales, marketing and distribution, we have found it necessary to enter into alliances with other companies. For example, we entered into a collaboration agreement with Baxalta for the development and commercialization of

S-36

Table of Contents

CHS-0214 in Europe, Brazil and other jurisdictions outside the United States. Similarly, we entered into a collaboration agreement with Daiichi Sankyo for the development and commercialization of CHS-0214 in Japan. For commercialization of our biosimilar product candidates in certain Caribbean and Latin American countries, we entered into an exclusive distribution arrangement with Orox. In the future, we may also find it necessary to form alliances or joint ventures with major pharmaceutical companies to jointly develop and/or commercialize specific biosimilar product candidates. In such alliances, we would expect our collaboration partners to provide substantial capabilities in clinical development, manufacturing, regulatory affairs, sales and marketing. We may not be successful in entering into any such alliances. Even if we do succeed in securing such alliances, we may not be able to maintain them if, for example, development or approval of a product candidate is delayed or sales of an approved product are disappointing. If we are unable to secure or maintain such alliances, we may not have the capabilities necessary to continue or complete development of our product candidates and bring them to market, which may have an adverse effect on our business.

In addition to product development and commercialization capabilities, we may depend on our alliances with other companies to provide substantial additional funding for development and potential commercialization of our product candidates. We may not be able to obtain funding on favorable terms from these alliances, and if we are not successful in doing so, we may not have sufficient funds to develop a particular product candidate internally or to bring product candidates to market. Failure to bring our product candidates to market will prevent us from generating sales revenue, and this may substantially harm our business. Furthermore, any delay in entering into these alliances could delay the development and commercialization of our product candidates, reduce their competitiveness even if they reach the market, and harm our business and operating results.

The commercial success of any current or future product candidate will depend upon the degree of market acceptance by physicians, patients, third-party payors and others in the medical community.

Even with the requisite approvals from the FDA and comparable foreign regulatory authorities, the commercial success of our product candidates will depend in part on the medical community, patients and third-party payors accepting our product candidates as medically useful, cost-effective and safe. Any product that we bring to the market may not gain market acceptance by physicians, patients, third-party payors and others in the medical community. The degree of market acceptance of any of our product candidates, if approved for commercial sale, will depend on a number of factors, including:

S-37

Table of Contents

Even if a potential product displays a favorable efficacy and safety profile in nonclinical and clinical studies, market acceptance of the product will not be fully known until after it is launched and may be negatively affected by a potential poor safety experience and the track record of other biosimilar product candidates. Our efforts to educate the medical community and third-party payors on the benefits of the product candidates may require significant resources, may be under-resourced compared to large well-funded pharmaceutical entities and may never be successful. If our product candidates are approved but fail to achieve an adequate level of acceptance by physicians, patients, third-party payors and others in the medical community, we will not be able to generate sufficient revenue to become or remain profitable.

Policies and practices governing the naming of biosimilar product candidates are neither fully established nor fully harmonized and are subject to debate and change. Failure to achieve a non-proprietary name sufficiently close to the reference product or be competitively disadvantaged in this regard, could adversely affect the commercial performance of our biosimilar product candidate.

United States Adopted Name, and International Nonproprietary Names, or INN, two important bodies involved in nonproprietary nomenclature, have no policy for the naming of biosimilar product candidates, and products are named on a case-by-case basis. Non-glycosylated proteins can follow the approach established for small molecule generics, which is to retain the same non-proprietary name if it is synthesized by a different route provided the substance is the same. Glycosylated proteins from different sources are given distinct names, as these proteins are expected to differ in their glycosylation profile. The same approach is valid for all other modifications to the protein that can occur in a cell after the cell has finished making the protein. A system currently under discussion at the World Health Organization that would enable the clear definition of all Similar Biotherapeutic Proteins would include the INN of the reference product in the first part of the name, and some form of biological qualifier that could uniquely identify the substance. Currently the FDA and EMA have final authority regarding names in the United States and the E.U. respectively, and it is unclear how they will handle nonproprietary nomenclature in the future. However, if they adopt policies requiring non-proprietary names that are distinct from the reference product or chose to assign a competing biosimilar product candidate to a Coherus product with a lower degree of nomenclature distinction from the reference product, payors, providers and patients may be more hesitant to use our biosimilar product candidate, believing the difference in nomenclature to be indicative of an important difference in quality of function from the reference product or the competing biosimilar product candidate. If this were to occur, our business could be negatively affected.

The third-party coverage and reimbursement status of newly-approved products is uncertain. Failure to obtain or maintain adequate coverage and reimbursement for new or current products could limit our ability to market those products and decrease our ability to generate revenue.

Pricing, coverage and reimbursement of our biosimilar product candidates, if approved, may not be adequate to support our commercial infrastructure. Our per-patient prices may not be sufficient to recover our development and manufacturing costs and potentially achieve profitability. Accordingly, the availability and adequacy of coverage and reimbursement by governmental and private payors are essential for most patients to be able to afford expensive treatments such as ours, if approved. Sales of our product candidates will depend substantially, both domestically and abroad, on the extent to which the costs of our product candidates will be paid for by health maintenance, managed care, pharmacy benefit and similar healthcare management organizations or

S-38

Table of Contents

reimbursed by government authorities, private health insurers and other third-party payors. If coverage and reimbursement are not available, or are available only to limited levels, we may not be able to successfully commercialize our product candidates. Even if coverage is provided, the approved reimbursement amount may not be adequate to allow us to establish or maintain pricing sufficient to realize a return on our investment.

There is significant uncertainty related to third-party coverage and reimbursement of newly approved products. In the United States, third-party payors, including private and governmental payors such as the Medicare and Medicaid programs, play an important role in determining the extent to which new drugs and biologics will be covered and reimbursed. The Medicare program covers certain individuals aged 65 or older or those who are disabled or suffering from end-stage renal disease. The Medicaid program, which varies from state to state, covers certain individuals and families who have limited financial means. The Medicare and Medicaid programs increasingly are used as models for how private payors and other governmental payors develop their coverage and reimbursement policies for drugs and biologics. It is difficult to predict at this time what third-party payors will decide with respect to the coverage and reimbursement for our biosimilar product candidates, if approved. In addition, in the United States, no uniform policy of coverage and reimbursement for biologics exists among third-party payors. Therefore, coverage and reimbursement for biologics can differ significantly from payor to payor. As a result, the process for obtaining favorable coverage determinations often is time-consuming and costly and may require us to provide scientific and clinical support for the use of our products to each payor separately, with no assurance that coverage and adequate reimbursement will be obtained. For example, Centers for Medicare & Medicaid Services (CMS) issued a proposed Part B rule in the third quarter of 2015 on biosimilar payment and coding which requires that multiple biosimilars to the same reference product be grouped and issued the same J-code for Medicare reimbursement purposes and that the payment amount for a billing code that describes a biosimilar is based on the average sales price (ASP) of all biosimilar products that reference a common biological product’s license application. This reimbursement rule could potentially create greater pricing pressure for biosimilars reimbursed in the medical benefit (Part B) segment. The final CMS rule is expected by the middle of the fourth quarter of 2015.

Outside the United States, pharmaceutical businesses are generally subject to extensive governmental price controls and other market regulations. We believe the increasing emphasis on cost-containment initiatives in Europe, Canada and other countries has and will continue to put pressure on the pricing and usage of our product candidates. In many countries, the prices of medical products are subject to varying price control mechanisms as part of national health systems. Other countries allow companies to fix their own prices for medical products, but monitor and control company profits. Additional foreign price controls or other changes in pricing regulation could restrict the amount that we are able to charge for our product candidates. Accordingly, in markets outside the United States, the reimbursement for our products may be reduced compared with the United States and may be insufficient to generate commercially reasonable revenue and profits.

Increasing efforts by governmental and third-party payors in the United States and abroad to control healthcare costs may cause such organizations to limit both coverage and the level of reimbursement for new products approved and, as a result, they may not cover or provide adequate payment for our product candidates. While cost containment practices generally benefit biosimilars, severe cost containment practices may adversely affect our product sales. We expect to experience pricing pressures in connection with the sale of any of our product candidates due to the trend toward managed healthcare, the increasing influence of health maintenance organizations and additional legislative changes.

Our biosimilar product candidates, if approved, could face price competition from other biosimilars of the same reference products for the same indication. This price competition could exceed our capacity to respond, detrimentally affecting our market share and revenue as well as adversely affecting the overall financial health and attractiveness of the market for the biosimilar.

We expect to enter highly competitive biosimilar markets. Successful competitors in the biosimilar market have the ability to effectively compete on price through payors and their third-party administrators who exert

S-39

Table of Contents

downward pricing pressure. It is possible our biosimilar competitors’ compliance with price discounting demands in exchange for market share could exceed our capacity to respond in kind and reduce market prices beyond our expectations. Such practices may limit our and our collaboration partners’ ability to increase market share and will also impact profitability.

Risks Related to Intellectual Property

If we infringe or are alleged to infringe intellectual property rights of third parties, our business could be harmed. Third-party claims of intellectual property infringement may prevent or delay our development and commercialization efforts.

Our commercial success depends in large part on avoiding infringement of the patents and proprietary rights of third parties. There have been many lawsuits and other proceedings involving patent and other intellectual property rights in the pharmaceutical industry, including patent infringement lawsuits, interferences, oppositions and reexamination proceedings before the U.S. Patent and Trademark Office, or USPTO, and corresponding foreign patent offices. Numerous U.S. and foreign issued patents and pending patent applications, which are owned by third parties, exist in the fields in which we are developing product candidates. As the pharmaceutical industry expands and more patents are issued, the risk increases that our product candidates may be subject to claims of infringement of the patent rights of third parties.

Our research, development and commercialization activities may infringe or otherwise violate or be claimed to infringe or otherwise violate patents owned or controlled by other parties. The companies that originated the products for which we intend to introduce biosimilar versions, such as Amgen, AbbVie Inc., or AbbVie, and Genentech, as well as other competitors (including other companies developing biosimilars) have developed, and are continuing to develop, worldwide patent portfolios of varying sizes and breadth, many of which are in fields relating to our business, and it may not always be clear to industry participants, including us, which patents cover various types of products or methods of use.

Third parties may assert that we are employing their proprietary technology without authorization. We are aware of third-party patents or patent applications with claims, for example, to compositions, formulations, methods of manufacture or methods for treatment related to the use or manufacture of our product candidates. While we have conducted freedom to operate analyses with respect to our lead product candidates CHS-1701, CHS-0214 and CHS-1420, we cannot guarantee that any of our analyses are complete and thorough, nor can we be sure that we have identified each and every patent and pending application in the United States and abroad that is relevant or necessary to the commercialization of our product candidates. Moreover, because patent applications can take many years to issue, there may be currently pending patent applications that may later result in issued patents covering our product candidates. With respect to products we are evaluating for inclusion in our future biosimilar product pipeline, our freedom to operate analyses, including our research on the timing of potentially relevant patent expirations, are ongoing.

There may also be patent applications that have been filed but not published and if such applications issue as patents, they could be asserted against us. For example, in most cases, a patent filed today would not become known to industry participants for at least 18 months given patent rules applicable in most jurisdictions which do not require publication of patent applications until 18 months after filing. We may also face claims from non-practicing entities that have no relevant product revenue and against whom our own patent portfolio may have no deterrent effect. In addition, coverage of patents is subject to interpretation by the courts, and the interpretation is not always uniform. If we are sued for patent infringement, we would need to demonstrate that our product candidates, products or methods either do not infringe the patent claims of the relevant patent or that the patent claims are invalid and/or unenforceable, and we may not be able to do this. Proving that a patent is invalid or unenforceable is difficult. For example, in the United States, proving invalidity requires a showing of clear and convincing evidence to overcome the presumption of validity enjoyed by issued patents. Also in proceedings before courts in Europe, the burden of proving invalidity of the patent usually rests on the party alleging

S-40

Table of Contents

invalidity. Even if we are successful in these proceedings, we may incur substantial costs and the time and attention of our management and scientific personnel could be diverted in pursuing these proceedings, which could have a material adverse effect on us. In addition, we may not have sufficient resources to bring these actions to a successful conclusion.

Third parties could bring claims against us that would cause us to incur substantial expenses and, if successful against us, could cause us to pay substantial monetary damages. Further, if a patent infringement suit were brought against us, we could be forced to stop or delay research, development, manufacturing or sales of the product or product candidate that is the subject of the suit. Ultimately, we could be prevented from commercializing a product or be forced to cease some aspect of our business operations, if, as a result of actual or threatened patent infringement claims, we are unable to enter into licenses on commercially acceptable terms or at all. If, as a result of patent infringement claims or to avoid potential claims, we choose or are required to seek licenses from third parties, these licenses may not be available on acceptable terms or at all. Even if we are able to obtain a license, the license may obligate us to pay substantial license fees or royalties or both, and the rights granted to us might be nonexclusive, which could result in our competitors gaining access to the same intellectual property. Parties making claims against us may obtain injunctive or other equitable relief, which could effectively block our ability to further develop and commercialize one or more of our product candidates. Defense of these claims, regardless of their merit, would likely involve substantial litigation expense and would likely be a substantial diversion of employee resources from our business. In the event of a successful claim of infringement against us, we may, in addition to being blocked from the market, have to pay substantial monetary damages, including treble damages and attorneys’ fees for willful infringement, pay royalties, redesign our infringing products or obtain one or more licenses from third parties, which may be impossible or require substantial time and monetary expenditure.

In addition to infringement claims against us, we may become a party to other patent litigation and other proceedings, including interference, inter partes review, or IPR, derivation or post-grant proceedings declared or granted by the USPTO and similar proceedings in foreign countries, regarding intellectual property rights with respect to our current or future products. An unfavorable outcome in any such proceedings could require us to cease using the related technology or to attempt to license rights to it from the prevailing party or could cause us to lose valuable intellectual property rights. Our business could be harmed if the prevailing party does not offer us a license on commercially reasonable terms, if any license is offered at all. Litigation or other proceedings may fail and, even if successful, may result in substantial costs and distract our management and other employees. We may also become involved in disputes with others regarding the ownership of intellectual property rights. For example, we jointly develop intellectual property with certain parties, and disagreements may therefore arise as to the ownership of the intellectual property developed pursuant to these relationships. If we are unable to resolve these disputes, we could lose valuable intellectual property rights.

On November 7, 2015 and December 9, 2015, we filed petitions for IPR in the USPTO against three AbbVie patents: U.S. patents 8,889,135; 9,017,680; and 9,073,987, all of which concern a 40 mg biweekly subcutaneous dosing regimen for treating rheumatoid arthritis (RA) with Humira. This treatment regimen is referenced in the approved FDA label for Humira. IPR filings, including ours, are a matter of public record and can be viewed at the USPTO website. On May 17, 2016, the Patent Trial and Appeal Board of the USPTO instituted our petition for IPR of AbbVie’s U.S. Patent 8,889,135 (the ‘135 Patent) directed to a dosing regimen in which 40 mg of Humira is administered subcutaneously every 13 to 15 days. The USPTO will conduct an administrative trial to determine patentability in regards to the ‘135 Patent, and if the USPTO decides to institute the remaining petitions for IPR, it will then conduct administrative trials to determine the patent claims challenged in those IPRs. If the USPTO refuses to institute the remaining IPRs, we and others will be able to challenge these patents in further IPRs or in district court litigation. However, if the USPTO institutes the IPRs but the arguments we raise therein fail to persuade the USPTO, after trial, that the challenged patent claims are unpatentable, we will not be able to raise those same arguments in district court litigation. However, other biosimilar entities may be in a position to challenge the patents in IPRs or district court litigation, and we could still assert certain bases of invalidity or unenforceability that are not subject to review in IPR proceedings. We

S-41

Table of Contents

note that on December 29, 2015, Boehringer Ingelheim filed two IPRs against AbbVie’s U.S. patent 8,889,135. If we do not prevail in the IPRs or in any subsequent litigation that may occur between us and AbbVie concerning AbbVie’s RA dosing patents, and if other parties are not successful in challenging the validity of these patents, we could be precluded from marketing a 40 mg biweekly subcutaneous dosage for RA until the expiration of AbbVie’s dosing patents directed to this treatment regimen. AbbVie’s public statements have indicated that the earliest expiration of these patents, and other AbbVie patents directed to non-RA indications, will occur in 2022. However, we understand based on USPTO records that the ‘135 patent expires in January 2025 and that AbbVie has a petition pending in the USPTO to extend that expiration to March 2028. On May 9, 2016, we filed a petition for IPR of AbbVie U.S. patent 9,114,166 (the ‘166 Patent) entitled “Formulation of Human Antibodies for Treating TNF-a Associated Disorders.” The ‘166 Patent generally concerns an isotonic formulation of TNF-a IgG1 antibody at a protein concentration of 50 mg/ml and pH of 4.0 to 8.0. We expect the USPTO to reach a decision in November, 2016 on whether to institute our IPR on the ‘166 patent. If we or other parties are unable to invalidate the ‘166 Patent either in an IPR or in district court litigation, and if we are not successful in developing a formulation that avoids infringement of the ‘166 Patent, we may be precluded from marketing a biosimilar of adalimumab until the expiration of the ‘166 Patent which we understand is August, 2022.

Third parties may submit applications for patent term extensions in the United States or other jurisdictions where similar extensions are available and/or Supplementary Protection Certificates in the E.U. states (including Switzerland) seeking to extend certain patent protection which, if approved, may interfere with or delay the launch of one or more of our biosimilar products.

The cost to us of any patent litigation or other proceeding, even if resolved in our favor, could be substantial. Patent litigation and other proceedings may fail, and even if successful, may result in substantial costs and distract our management and other employees. The companies that originated the products for which we intend to introduce biosimilar versions, as well as other competitors (including other biosimilar companies) may be able to sustain the costs of such litigation or proceedings more effectively than we can because of their substantially greater financial resources. Uncertainties resulting from the initiation and continuation of patent litigation or other proceedings could impair our ability to compete in the marketplace.

So called “submarine” patents may be granted to our competitors that may significantly alter our launch timing expectations, reduce our projected market size, cause us to modify our product or process or block us from the market altogether.

The term “submarine” patent has been used in the pharmaceutical industry and in other industries to denote a patent issuing from an application that was not published, publically known or available prior to its grant. Submarine patents add substantial risk and uncertainty to our business. Submarine patents may issue to our competitors covering our biosimilar product candidates or our pipeline candidates and thereby cause significant market entry delay, defeat our ability to market our products or cause us to abandon development and/or commercialization of a molecule.

Examples of submarine patents include Brockhaus, et al ., U.S. patents 8,063,182 and 8,163,522 (controlled by Amgen), which are directed to the fusion protein in Enbrel. If challenges to the scope, validity or enforceability of the Brockhaus patents are not initiated, or, if initiated, are not successful, these patents, unless licensed to us by Amgen, will preclude our ability to introduce an etanercept (Enbrel) biosimilar product candidate in the U.S. market until at least 2029.

The issuance of one or more submarine patents may harm our business by causing substantial delays in our ability to introduce a biosimilar candidate into the U.S. market.

We may not identify relevant patents or may incorrectly interpret the relevance, scope or expiration of a patent which might adversely affect our ability to develop and market our products.

We cannot guarantee that any of our patent searches or analyses, including but not limited to the identification of relevant patents, the scope of patent claims or the expiration of relevant patents, are complete

S-42

Table of Contents

and thorough, nor can we be certain that we have identified each and every patent and pending application in the United States and abroad that is relevant to or necessary for the commercialization of our product candidates in any jurisdiction.

The scope of a patent claim is determined by an interpretation of the law, the written disclosure in a patent and the patent’s prosecution history. Our interpretation of the relevance or the scope of a patent or a pending application may be incorrect, which may negatively impact our ability to market our products or pipeline molecules. We may incorrectly determine that our products are not covered by a third party patent.

Many patents may cover a marketed product, including but not limited to the composition of the product, methods of use, formulations, cell line constructs, vectors, growth media, production processes and purification processes. The identification of all patents and their expiration dates relevant to the production and sale of an originator product is extraordinarily complex and requires sophisticated legal knowledge in the relevant jurisdiction. It may be impossible to identify all patents in all jurisdictions relevant to a marketed product. Our determination of the expiration date of any patent in the United States or abroad that we consider relevant may be incorrect which may negatively impact our ability to develop and market our products.

Our failure to identify and correctly interpret relevant patents may negatively impact our ability to develop and market our products.

Although we are not currently involved in any litigation, we may be involved in lawsuits to protect or enforce our patents, which could be expensive, time consuming and unsuccessful.

We have issued patents and pending patent applications. We may discover that competitors are infringing the issued patents or the pending applications when or if they issue. Expensive and time-consuming litigation may be required to abate such infringement. Although we are not currently involved in any litigation to enforce patents, if we or one of our collaboration partners, such as Baxalta, Daiichi Sankyo or Orox, were to initiate legal proceedings against a third party to enforce a patent covering one of our product candidates, the defendant could counterclaim that the patent covering our product candidate is invalid and/or unenforceable. In patent litigation in the United States, defendant counterclaims alleging invalidity and/or unenforceability are commonplace. Grounds for a validity challenge could be an alleged failure to meet any of several statutory requirements, including but not limited to lack of novelty, obviousness or non-enablement. Grounds for an unenforceability assertion could include an allegation that someone involved in the prosecution of the patent withheld relevant or material information related to the patentability of the invention from the USPTO or made a misleading statement during prosecution. The outcome following legal assertions of invalidity and unenforceability is unpredictable.

Interference proceedings provoked by third parties or brought by us or declared by the USPTO may be necessary to determine the priority of inventions with respect to our patents or patent applications. An unfavorable outcome could require us to cease using the related technology or to attempt to license rights to it from the prevailing party. Our business could be harmed if we cannot obtain a license from the prevailing party on commercially reasonable terms. Third parties may request an IPR of our patents in the USPTO. An unfavorable decision may result in the revocation of our patent or a limitation to the scope of the claims of our patents. Our defense of litigation, interference or IPR proceedings may fail and, even if successful, may result in substantial costs and distract our management and other employees. In addition, the uncertainties associated with litigation could have a material adverse effect on our ability to raise the funds necessary to continue our clinical trials, continue our research programs, license necessary technology from third parties or enter into development partnerships that would help us bring our product candidates to market.

Furthermore, because of the substantial amount of discovery required in connection with intellectual property litigation, there is a risk that some of our confidential information could be compromised by disclosure

S-43

Table of Contents

during any litigation we initiate to enforce our patents. There could also be public announcements of the results of hearings, motions or other interim proceedings or developments. If securities analysts or investors perceive these results to be negative, it could have a material adverse effect on the price of our common stock.

We may be subject to claims that our employees, consultants, or independent contractors have wrongfully used or disclosed confidential information of third parties or that our employees have wrongfully used or disclosed alleged trade secrets of their former employers.

We employ individuals, retain independent contractors and consultants and members on our board of directors or scientific advisory board who were previously employed at universities or other pharmaceutical companies, including our competitors or potential competitors. For example, our Chief Executive Officer, Dennis M. Lanfear, and our Chief Technical Officer, Peter K. Watler, Ph.D., are former employees of Amgen. Our Chief Scientific Officer, Alan C. Herman, Ph.D., is a former employee of Amgen and Genentech. Mr. Lanfear and Drs. Watler and Herman were employed at Amgen during periods when Amgen’s operations included the development and commercialization of Neupogen, Neulasta and Enbrel. Our Chief Medical Officer, Barbara K. Finck, M.D., is a former employee of Immunex Corporation, or Immunex (the company that initially discovered the drug Enbrel and was later acquired by Amgen). Dr. Finck was involved in the clinical development of etanercept (Enbrel) while at Immunex and is a named inventor on at least four U.S. patents assigned to Amgen directed to the use of etanercept (Enbrel) for the treatment of psoriasis and psoriatic arthritis. Our board of directors and scientific advisory board include members that were former employees of Genentech, Amgen and Abbott Laboratories. Although we try to ensure that our employees, consultants and independent contractors do not use the proprietary information or know-how of others in their work for us and we are not currently subject to any claims that they have done so, we may in the future be subject to such claims. Litigation may be necessary to defend against these claims. If we fail in defending any such claims, in addition to paying monetary damages, we may lose valuable intellectual property rights or personnel, which could adversely impact our business. Even if we are successful in defending against such claims, litigation could result in substantial costs and be a distraction to management and other employees.

If we are unable to obtain and maintain effective patent rights for our product candidates or any future product candidates, we may not be able to prevent competitors from using technologies we consider important in our successful development and commercialization of our product candidates, resulting in loss of any potential competitive advantage our patents may have otherwise afforded us.

While our principal focus in matters relating to intellectual property is to avoid infringing the valid and enforceable rights of third parties, we also rely upon a combination of patents, trade secret protection and confidentiality agreements to protect our own intellectual property related to our product candidates and development programs. Our ability to enjoy any competitive advantages afforded by our own intellectual property depends in large part on our ability to obtain and maintain patents and other intellectual property protection in the United States and in other countries with respect to various proprietary elements of our product candidates, such as, for example, our product formulations and processes for manufacturing our products and our ability to maintain and control the confidentiality of our trade secrets and confidential information critical to our business.

We have sought to protect our proprietary position by filing patent applications in the United States and abroad related to our products that are important to our business. This process is expensive and time consuming, and we may not be able to file and prosecute all necessary or desirable patent applications at a reasonable cost or in a timely manner. It is also possible that we will fail to identify patentable aspects of our research and development output before it is too late to obtain patent protection. There is no guarantee that any patent application we file will result in an issued patent having claims that protect our products. Additionally, while the basic requirements for patentability are similar across jurisdictions, each jurisdiction has its own specific requirements for patentability. We cannot guarantee that we will obtain identical or similar patent protection covering our products in all jurisdictions where we file patent applications.

S-44

Table of Contents

The patent positions of biopharmaceutical companies generally are highly uncertain and involve complex legal and factual questions for which legal principles remain unresolved. As a result, the patent applications that we own or license may fail to result in issued patents with claims that cover our product candidates in the United States or in other foreign countries for many reasons. There is no assurance that all potentially relevant prior art relating to our patents and patent applications has been found, considered or cited during patent prosecution, which can be used to invalidate a patent or prevent a patent from issuing from a pending patent application. Even if patents do successfully issue, and even if such patents cover our product candidates, third parties may challenge their validity, enforceability or scope, which may result in such patent claims being narrowed, found unenforceable or invalidated. Our patents and patent applications, even if they are unchallenged, may not adequately protect our intellectual property, provide exclusivity for our product candidates or prevent others from designing around our claims. Any of these outcomes could impair our ability to prevent competitors from using the technologies claimed in any patents issued to us, which may have an adverse impact on our business.

In addition, recent changes to the patent laws of the United States provide additional procedures for third parties to challenge the validity of issued patents based on patent applications filed after March 15, 2013. If the breadth or strength of protection provided by the patents and patent applications we hold or pursue with respect to our current or future product candidates is challenged, then it could threaten our ability to prevent competitive products using our proprietary technology. Further, because patent applications in the United States and most other countries are confidential for a period of time, typically for 18 months after filing, we cannot be certain that we were the first to either (i) file any patent application related to our product candidates or (ii) invent any of the inventions claimed in our patents or patent applications. Furthermore, for applications filed before March 16, 2013 or patents issuing from such applications, an interference proceeding can be provoked by a third party or instituted by the USPTO to determine who was the first to invent any of the subject matter covered by the patent claims of our applications and patents. As of March 16, 2013, the United States transitioned to a “first-to-file” system for deciding which party should be granted a patent when two or more patent applications claiming the same invention are filed by different parties. A third party that files a patent application in the USPTO before we do, could therefore be awarded a patent covering an invention of ours even if we had made the invention before it was made by the third party. The change to “first-to-file” from “first-to-invent” is one of the changes to the patent laws of the United States resulting from the Leahy-Smith America Invents Act, or the Leahy-Smith Act, signed into law on September 16, 2011. Among some of the other significant changes to the patent laws are changes that limit where a patentee may file a patent infringement suit and provide opportunities for third parties to challenge any issued patent in the USPTO. It is not yet clear what, if any, impact the Leahy-Smith Act will have on the operation of our business. However, the Leahy-Smith Act and its implementation could increase the uncertainties and costs surrounding the prosecution of our patent applications and the enforcement or defense of our issued patents, all of which could have a material adverse effect on our business and financial condition.

Patents granted by the European Patent Office may be opposed by any person within nine months from the publication of their grant and, in addition, may be challenged before national courts at any time. If the breadth or strength of protection provided by the patents and patent applications we hold, license or pursue with respect to our product candidates is threatened, it could threaten our ability to prevent third parties from using the same technologies that we use in our product candidates.

We have issued patents and we have filed patent applications, which are currently pending, covering various aspects of our product candidates. We cannot offer any assurances about which, if any, patents will issue, the breadth of any such patent or whether any issued patents will be found invalid and unenforceable or will be threatened or infringed by third parties. Any successful actions by third parties to challenge the validity or enforceability of any patents which may issue to us could deprive us of the ability to prevent others from using the technologies claimed in such issued patents. Further, if we encounter delays in regulatory approvals, the period of time during which we could market a product candidate under patent protection could be reduced.

While our business is based primarily on the timing of our biosimilar product launches to occur after the expiration of relevant patents, we have filed a number of patent applications covering our own proprietary

S-45

Table of Contents

formulations and processes for our product candidates when we have believed securing such patents may afford a competitive advantage. For example, the companies that originated Enbrel and Humira (Amgen and AbbVie, respectively) own patents directed to formulations for these products. We have developed our own proprietary formulations for these products which we believe are not covered by valid, enforceable third party patents, including Amgen or AbbVie’s formulation patents, and we have filed patent applications covering our formulations which are currently pending in the U.S. and globally. We cannot guarantee that our proprietary formulations will avoid infringement of third party patents. Moreover, because competitors may be able to develop their own proprietary product formulations, it is uncertain whether issuance of any of our pending patent applications directed to formulations of etanercept (Enbrel) and adalimumab (Humira) would cover the formulations of any competitors. As in the case of formulations, originators have also filed patents directed to methods for manufacturing their products. We have filed patent applications, currently pending, both in the U.S. and globally, directed to aspects of our manufacturing processes for CHS-0214 and CHS-1420. We believe the proprietary technologies embodied in our process-related patent filings may provide us with competitive advantage and are not covered by valid, enforceable intellectual property rights of third party patents. However, as in the case of our formulation patent filings, it is highly uncertain and we cannot predict whether our patent filings on process enhancements will afford us a competitive advantage against third parties, and we cannot guarantee that the methods we use to manufacture our products will avoid infringement of third party patents.

We do not consider it necessary for us or our competitors to obtain or maintain a proprietary patent position in order to engage in the business of biosimilar development and commercialization. Hence, while our ability to secure patent coverage on our own proprietary developments may improve our competitive position with respect to the product candidates we intend to commercialize, we do not view our own patent filings as a necessary or essential requirement for conducting our business nor do we rely on our own patent filings or the potential for any commercial advantage they may provide us as a basis for our success.

Obtaining and maintaining our patent protection depends on compliance with various procedural requirements, document submissions, fee payment and other requirements imposed by governmental patent agencies. Our patent protection could be reduced or eliminated for non-compliance with these requirements.

The USPTO and various foreign governmental patent agencies require compliance with a number of procedural, documentary, fee payment and other provisions during the patent process. In many cases, an inadvertent lapse can be cured by payment of a late fee or by other means in accordance with the applicable rules. However, there are situations in which noncompliance can result in abandonment or lapse of a patent or patent application, resulting in partial or complete loss of patent rights in the relevant jurisdiction. In such an event, competitors might be able to enter the market earlier than would otherwise have been the case.

We may not be able to protect our intellectual property rights throughout the world.

Filing, prosecuting, defending and enforcing patents on product candidates in all countries throughout the world would be prohibitively expensive, and our intellectual property rights in some countries outside the United States can be less extensive than those in the United States. In addition, the laws of some foreign countries do not protect intellectual property rights to the same extent as federal and state laws in the United States. Further, licensing partners such as Baxalta or Daiichi Sankyo may chose not to file patent applications in certain jurisdictions in which we may obtain commercial rights, thereby precluding the possibility of later obtaining patent protection in these countries. Consequently, we may not be able to prevent third parties from practicing our inventions in all countries outside the United States or importing products made using our inventions into the United States or other jurisdictions. Competitors may use our technologies in jurisdictions where we have not obtained patent protection to develop their own products and may also export infringing products to territories where we have patent protection, but the ability to enforce our patents is not as strong as that in the United States. These products may compete with our products and our patents or other intellectual property rights may not be effective or sufficient to prevent them from competing.

S-46

Table of Contents

Many companies have encountered significant problems in protecting and defending intellectual property rights in foreign jurisdictions. The legal systems of certain countries, particularly certain developing countries, do not favor the enforcement of patents, trade secrets and other intellectual property protection, which could make it difficult for us to stop the infringement of our patents or marketing of competing products in violation of our proprietary rights generally. Proceedings to enforce our patent rights in foreign jurisdictions, whether or not successful, could result in substantial costs and divert our efforts and attention from other aspects of our business, could put our patents at risk of being invalidated or interpreted narrowly and our patent applications at risk of not issuing and could provoke third parties to assert claims against us. We may not prevail in any lawsuits that we initiate and the damages or other remedies awarded, if any, may not be commercially meaningful. Governments of foreign countries may force us to license our patents to third parties on terms that are not commercially reasonable or acceptable to us. Accordingly, our efforts to enforce our intellectual property rights around the world may be inadequate to obtain a significant commercial advantage from the intellectual property that we develop or license.

Changes in U.S. patent law could diminish the value of patents in general, thereby impairing our ability to protect our products.

As is the case with other biopharmaceutical companies, our success is heavily dependent on intellectual property, particularly patents. Obtaining and enforcing patents in the biopharmaceutical industry involves both technological and legal complexity. Therefore, obtaining and enforcing biopharmaceutical patents is costly, time consuming and inherently uncertain. In addition, the United States has recently enacted and is currently implementing wide-ranging patent reform legislation. Recent U.S. Supreme Court rulings have narrowed the scope of patent protection available in certain circumstances and weakened the rights of patent owners in certain situations.

In addition to increasing uncertainty with regard to our ability to obtain patents in the future, this combination of events has created uncertainty with respect to the value of patents, once obtained. Depending on future actions by the United States Congress, the Federal Courts and the USPTO, the laws and regulations governing patents could change in unpredictable ways that would weaken our ability to obtain new patents or to enforce our existing patents and patents that we might obtain in the future.

If we are unable to maintain effective (non-patent) proprietary rights for our product candidates or any future product candidates, we may not be able to compete effectively in our markets.

While we have filed patent applications to protect certain aspects of our own proprietary formulation and process developments, we also rely on trade secret protection and confidentiality agreements to protect proprietary scientific, business and technical information and know-how that is not or may not be patentable or that we elect not to patent. However, confidential information and trade secrets can be difficult to protect. Moreover, the information embodied in our trade secrets and confidential information may be independently and legitimately developed or discovered by third parties without any improper use of or reference to information or trade secrets. We seek to protect the scientific, technical and business information supporting our operations, as well as the confidential information relating specifically to our product candidates by entering into confidentiality agreements with parties to whom we need to disclose our confidential information, for example, our employees, consultants, scientific advisors, board members, contractors, potential collaborators and investors. However, we cannot be certain that such agreements have been entered into with all relevant parties. We also seek to preserve the integrity and confidentiality of our data and trade secrets by maintaining physical security of our premises and physical and electronic security of our information technology systems, but it is possible that these security measures could be breached. While we have confidence in these individuals, organizations and systems, agreements or security measures may be breached, and we may not have adequate remedies for any breach. Our confidential information and trade secrets thus may become known by our competitors in ways we cannot prove or remedy.

S-47

Table of Contents

Although we expect all of our employees and consultants to assign their inventions to us, and all of our employees, consultants, advisors and any third parties who have access to our proprietary know-how, information or technology to enter into confidentiality agreements, we cannot provide any assurances that all such agreements have been duly executed. We cannot guarantee that our trade secrets and other confidential proprietary information will not be disclosed or that competitors will not otherwise gain access to our trade secrets or independently develop substantially equivalent information and techniques. For example, any of these parties may breach the agreements and disclose our proprietary information, including our trade secrets, and we may not be able to obtain adequate remedies for such breaches. Misappropriation or unauthorized disclosure of our trade secrets could impair our competitive position and may have a material adverse effect on our business. Additionally, if the steps taken to maintain our trade secrets are deemed inadequate, we may have insufficient recourse against third parties for misappropriating the trade secret. We cannot guarantee that our employees, former employees or consultants will not file patent applications claiming our inventions. Because of the “first-to-file” laws in the United States, such unauthorized patent application filings may defeat our attempts to obtain patents on our own inventions.

We may be subject to claims challenging the inventorship of our patent filings and other intellectual property.

Although we are not currently aware of any claims challenging the inventorship of our patent applications or ownership of our intellectual property, we may in the future be subject to claims that former employees, collaborators or other third parties have an interest in our patent applications or patents we may be granted or other intellectual property as an inventor or co-inventor. For example, we may have inventorship or ownership disputes arise from conflicting obligations of consultants or others who are involved in developing our product candidates. Litigation may be necessary to defend against these and other claims challenging inventorship or ownership. If we fail in defending any such claims, in addition to paying monetary damages, we may lose valuable intellectual property rights, such as exclusive ownership of or right to use valuable intellectual property. Such an outcome could have a material adverse effect on our business. Even if we are successful in defending against such claims, litigation could result in substantial costs and be a distraction to management and other employees.

If we fail to comply with our obligations in the agreements under which we license intellectual property and other rights from third parties or otherwise experience disruptions to our business relationships with our licensors, we could lose license rights that are important to our business.

We are a party to certain non-exclusive intellectual property license agreements with Genentech (pertaining to the production of monoclonal antibodies) and Selexis SA and other vendors (pertaining to cell lines for CHS-0214 and CHS-1420) that are important to our business, and we expect to enter into additional license agreements in the future. Our existing license agreements impose, and we expect that future license agreements will impose, various diligence, milestone payment, royalty and other obligations on us. If we fail to comply with our obligations under these agreements or we are subject to a bankruptcy, we may be required to make certain payments to the licensor, we may lose the exclusivity of our license or the licensor may have the right to terminate the license, in which event we would not be able to develop or market products covered by the license. Additionally, the milestone and other payments associated with these licenses will make it less profitable for us to develop our product candidates.

In the event we breach any of our obligations related to such agreements, we may incur significant liability to our licensing partners. Disputes may arise regarding intellectual property subject to a licensing agreement, including but not limited to:

S-48

Table of Contents

If disputes over intellectual property and other rights that we have licensed prevent or impair our ability to maintain our current licensing arrangements on acceptable terms, we may be unable to successfully develop and commercialize the affected product candidates and that could have a material adverse effect on our business.

We may not be successful in obtaining or maintaining necessary rights to our product candidates through acquisitions and in-licenses.

We currently have rights to certain intellectual property, through licenses from third parties and under patent applications that we own, to develop CHS-0214 and CHS-1420. Because we may find that our programs require the use of proprietary rights held by third parties, the growth of our business may depend in part on our ability to acquire, in-license or use these proprietary rights. We may be unable to acquire or in-license compositions, methods of use, processes or other third party intellectual property rights from third parties that we identify as necessary for our product candidates. The licensing and acquisition of third-party intellectual property rights is a competitive area, and a number of more established companies are also pursuing strategies to license or acquire third-party intellectual property rights that we may consider attractive. These established companies may have a competitive advantage over us due to their size, financial resources and greater clinical development and commercialization capabilities. In addition, companies that perceive us to be a competitor may be unwilling to assign or license rights to us. We also may be unable to license or acquire third-party intellectual property rights on terms that would allow us to make an appropriate return on our investment.

If we are unable to successfully obtain required third party intellectual property rights or maintain the existing intellectual property rights we have, we may have to abandon development of that program and our business and financial condition could suffer.

Our ability to market our products in the United States may be significantly delayed or prevented by the BPCIA patent dispute resolution mechanism.

The Biologics Price Competition and Innovation Act of 2009, Title VII, Subtitle A of the Patent Protection and Affordable Care Act, Pub.L.No.111-148, 124 Stat.119, Sections 7001-02 signed into law March 23, 2010, and codified in 42 U.S.C. §262, or the BPCIA, created an elaborate and complex patent dispute resolution mechanism for biosimilars that, if we choose to employ it, could prevent us from launching our product candidates in the United States or could substantially delay such launches.

The BPCIA establishes a patent disclosure and briefing process between the biosimilar applicant and the originator that is demanding and time-sensitive. While certain aspects of this process are still being tested in the federal courts, the Federal Circuit, as discussed further below, recently ruled that this process is not mandatory, such that a biosimilar applicant may elect to engage in this process, but is not required to do so. The following is an overview of the patent exchange and patent briefing procedures established by the BPCIA for biosimilar applicants that elect to employ them:

S-49

Table of Contents

On July 21, 2015 the Federal Circuit court in litigation between Amgen and Sandoz ruled that the BPCIA patent exchange process is optional and that applicants that choose not to engage in it must comply with the BPCIA’s requirement to provide the originator 180 days prior notice of commercial marketing. The court also ruled that such notice is not effective unless given after FDA licensure. Thus, biosimilar applicants that opt out of the BPCIA patent exchange process must wait at least 180 days after licensure to launch their biosimilar products. On February 16, 2016 Sandoz filed a petition for writ of certiorari to the United States Supreme Court, asking the Court to reverse the Federal Circuit court’s decision that the BPCIA 180 days pre-marketing notification can only be given after FDA has approved the biosimilar product. The Supreme Court may or may not choose to review the Federal Circuit decision. Regardless of how the 180 days notice provision is applied by the courts, patent infringement lawsuits filed by originators could result in preliminary or permanent injunctions extending beyond the 180 days notice period.

On December 9, 2015, in litigation between Amgen and Apotex (relating to Apotex’s biosimilar for Neulasta (pegiflgrastim), the Florida District court ruled that although Apotex had engaged in the BPCIA patent

S-50

Table of Contents

exchange process voluntarily, it was nonetheless required to provide 180 days prior notice of commercial marketing to Amgen, and that it could only provide such notice upon regulatory approval. Apotex has appealed this decision to the Federal Circuit, where the matter is presently pending. Thus, despite the Florida District Court decision, the issue remains unsettled as to whether a party that engages voluntarily in the BPCIA patent exchange process must nevertheless provide 180 days notice of commercial marketing to the originator. A further open issue is whether such notice may be given before, or only after, FDA licensure of the biosimilar. If a panel of the Federal Circuit affirms the Florida District Court decision and such decision is not overturned upon reconsideration by a full panel of the Federal Circuit or by the US. Supreme Court, all 351(k) biosimilar applicants will be required to refrain from launching an approved biosimilar product for 180 days following 351(k) regulatory approval, without regard to whether such applicants elected to participate in the BPCIA patent exchange process.

A significant legal risk for biosimilar applicants that pursue regulatory approval under the 351(k) regulatory approval route, and also elect to engage in the above-described BPCIA patent exchange mechanism, is that the process could result in the initiation of patent infringement litigation prior to FDA approval of a 351(k) application, and such litigation could result in blocking the market entry of the biosimilar product. However, even if biosimilar applicants opt out of the BPCIA patent exchange process, originators will still have the right to assert patent infringement as a basis to enjoin a biosimilar product launch. Thus, whether or not we engage in the BPCIA patent exchange process, there is risk that patent infringement litigation initiated by originators could prevent us indefinitely from launching our biosimilar products.

The legal and strategic considerations weighing for or against a decision to voluntarily engage in the BPCIA patent exchange process are complex and will differ on a product-by-product basis. If we decide to engage in the BPCIA patent exchange process, preparing for and conducting the patent exchange, briefing and negotiation process outlined above will require extraordinarily sophisticated legal counseling and extensive planning, all under extremely tight deadlines. Moreover, it may be difficult for us to secure or retain such legal support if large, well-funded originators have already entered into engagements with highly qualified law firms or if the most highly qualified law firms choose not to represent biosimilar applicants due to their long standing relationships with originators.

Furthermore, we could be at a serious disadvantage in this process as an originator company, such as Amgen (in the case of CHS-1420 or CHS-0214) or AbbVie (in the case of CHS-1420) may be able to apply substantially greater legal and financial resources to this process than we could.

If we file a 351(k) regulatory approval application for one or more of our products, we may consider it necessary or advisable to adopt the strategy of selecting one or more patents of the originator to litigate in the above described BPCIA process (for example in steps 3 and 7, of the process, as outlined above), either to assert our non-infringement of such patents or to challenge their validity, or both; but we may ultimately not be successful in that strategy and could be prevented, indefinitely, from marketing the product in the United States.

Under the complex, and uncertain rules of the BPCIA patent provisions, coupled with the inherent uncertainty surrounding the legal interpretation of any originator patents that might be asserted against us in this new process, we see substantial risk that the BPCIA process may significantly delay or defeat our ability to market our products in the United States.

Risks Related to Our Business Operations

We may not be successful in our efforts to identify, develop or commercialize additional product candidates.

Although a substantial amount of our effort will focus on the continued clinical testing, potential approval and commercialization of our existing product candidates, the success of our business also depends upon our ability to identify, develop and commercialize additional product candidates. Research programs to identify new

S-51

Table of Contents

product candidates require substantial technical, financial and human resources. We may focus our efforts and resources on potential programs or product candidates that ultimately prove to be unsuccessful. Our development efforts may fail to yield additional product candidates suitable for clinical development and commercialization for a number of reasons, including but not limited to the following:

If any of these events occur, we may be forced to abandon our development efforts for a program or programs or we may not be able to identify, develop or commercialize additional product candidates, which would have a material adverse effect on our business and could potentially cause us to cease operations.

Our management is required to devote substantial time to the operation of a public company. We may fail to comply with the rules that apply to public companies, including Section 404 of the Sarbanes-Oxley Act of 2002, which could result in sanctions or other penalties that would harm our business.

We incur significant legal, accounting and other expenses as a public company, including costs resulting from public company reporting obligations under the Securities Exchange Act of 1934, as amended, or the Exchange Act, and regulations regarding corporate governance practices. The listing requirements of The NASDAQ Global Market require that we satisfy certain corporate governance requirements relating to director independence, distributing annual and interim reports, stockholder meetings, approvals and voting, soliciting proxies, conflicts of interest and a code of conduct. Our management and other personnel must devote a substantial amount of time to ensure that we comply with all of these requirements. Any changes we make to comply with these obligations may not be sufficient to allow us to satisfy our obligations on a timely basis, or at all.

We are subject to Section 404 of The Sarbanes-Oxley Act of 2002, or Section 404, and the related rules of the Securities and Exchange Commission, or SEC, which generally require our management and independent registered public accounting firm to report on the effectiveness of our internal control over financial reporting. Under the Jumpstart Our Business Startups Act of 2012, or JOBS Act, we previously took advantage of certain exemptions from various reporting requirements that are applicable to public companies that are not emerging growth companies, including, but not limited to, not being required to comply with the auditor attestation requirements of Section 404. However, based on our non-affiliated market capitalization as of June 30, 2015, we ceased to be an emerging growth company under the JOBS Act on January 1, 2016 and therefore are now required to include an opinion from our independent registered public accounting firm on the effectiveness of our internal controls over financial reporting.

Stockholder activism, the current political environment and the current high level of government intervention and regulatory reform may also lead to substantial new regulations and disclosure obligations, which may lead to additional compliance costs and impact the manner in which we operate our business in ways we cannot currently anticipate. Our management and other personnel will need to devote a substantial amount of

S-52

Table of Contents

time to these compliance initiatives. Moreover, these rules and regulations will increase our legal and financial compliance costs and will make some activities more time consuming and costly. For example, we expect these rules and regulations to make it more difficult and more expensive for us to obtain director and officer liability insurance and we may be required to incur substantial costs to maintain our current levels of such coverage.

Healthcare legislative reform measures may have a material adverse effect on our business and results of operations.

In the United States, there have been and continue to be a number of legislative initiatives to contain healthcare costs. For example, in March 2010, the Patient Protection and Affordable Care Act, as amended by the Health Care and Education Reconciliation Act, or together, the PPACA, was passed, which substantially changes the way health care is financed by both governmental and private insurers and significantly impacts the U.S. pharmaceutical industry. The PPACA, among other things, addresses a new methodology by which rebates owed by manufacturers under the Medicaid Drug Rebate Program are calculated for drugs that are inhaled, infused, instilled, implanted or injected, increases the minimum Medicaid rebates owed by manufacturers under the Medicaid Drug Rebate Program and extends the rebate program to individuals enrolled in Medicaid managed care organizations, adds a provision to increase the Medicaid rebate for line extensions or reformulated drugs, establishes annual fees and taxes on manufacturers of certain branded prescription drugs and promotes a new Medicare Part D coverage gap discount program.

In addition, other legislative changes have been proposed and adopted in the United States since the PPACA was enacted. On August 2, 2011, the Budget Control Act of 2011, among other things, created measures for spending reductions by Congress. A Joint Select Committee on Deficit Reduction, tasked with recommending a targeted deficit reduction of at least $1.2 trillion for the years 2013 through 2021, was unable to reach required goals, thereby triggering the legislation’s automatic reduction to several government programs. This includes aggregate reductions of Medicare payments to providers up to 2% per fiscal year, which went into effect on April 1, 2013 and will stay in effect through 2024 unless additional Congressional action is taken. On January 2, 2013, President Obama signed into law the American Taxpayer Relief Act of 2012 which, among other things, further reduced Medicare payments to certain providers, including physicians, hospitals and cancer treatment centers. We expect that additional state and federal healthcare reform measures will be adopted in the future, any of which could limit the amounts that federal and state governments will pay for healthcare products and services, which could result in reduced demand for our product candidates or additional pricing pressures, such as a single reimbursement code for biosimilar products.

We may be subject, directly or indirectly, to federal and state healthcare laws, including fraud and abuse, false claims, physician payment transparency and health information privacy and security laws. If we are unable to comply or have not fully complied with such laws, we could face substantial penalties.

If we obtain FDA approval for any of our product candidates and begin commercializing those products in the United States, our operations may be directly or indirectly through our customers subject to various federal and state fraud and abuse laws, including, without limitation, the federal Anti-Kickback Statute, the federal False Claims Act and physician sunshine laws and regulations. These laws may impact, among other things, our proposed sales, marketing and education programs. In addition, we may be subject to patient privacy regulation by both the federal government and the states in which we conduct our business. The laws that may affect our ability to operate include:

S-53

Table of Contents

Because of the breadth of these laws and the narrowness of the statutory exceptions and safe harbors available, it is possible that some of our business activities could be subject to challenge under one or more of such laws. In addition, recent health care reform legislation has strengthened these laws. For example, the PPACA, among other things, amends the intent requirement of the federal anti-kickback and criminal healthcare fraud statutes. A person or entity no longer needs to have actual knowledge of this statute or specific intent to violate it. Moreover, the PPACA provides that the government may assert that a claim including items or services resulting from a violation of the federal anti-kickback statute constitutes a false or fraudulent claim for purposes of the False Claims Act.

If our operations are found to be in violation of any of the laws described above or any other governmental regulations that apply to us, we may be subject to penalties, including civil and criminal penalties, damages, fines, exclusion from participation in government health care programs, such as Medicare and Medicaid, imprisonment and the curtailment or restructuring of our operations, any of which could adversely affect our ability to operate our business and our results of operations.

The international aspects of our business expose us to business, regulatory, political, operational, financial and economic risks associated with doing business outside of the United States.

We currently have limited international operations of our own and have a number of international collaborations. Doing business internationally involves a number of risks, including but not limited to:

S-54

Table of Contents

Sanctions against Russia, and Russia’s response to those sanctions, could materially adversely affect our business, financial condition and results of operations.

Due to Russia’s military intervention in Ukraine, the United States and the E.U. have imposed sanctions on certain individuals and one financial institution in Russia and have proposed the use of broader economic sanctions. In response, Russia has imposed entry bans on certain U.S. lawmakers and officials. Our wholly owned subsidiary, InteKrin Therapeutics, Inc., or InteKrin, which we acquired in February 2014 is majority owner of a Russian pharmaceutical development entity, ZAO InteKrin, which held $105,000 of cash in Russian banks as of March 31, 2016. This Russian subsidiary of InteKrin conducts research and development activities for a product we acquired as part of our acquisition of InteKrin. The product is a small molecule peroxisome proliferator-activated receptor, or PPAR, gamma inhibitor that may hold promise in treatment of multiple sclerosis, or MS. While not a biosimilar, this PPAR gamma inhibitor compound may be complementary to biosimilar products for treatment of MS that we are currently evaluating for inclusion in our pipeline. If the United States and the E.U. were to impose sanctions on Russian businesses, or if Russia were to take retaliatory action against U.S. companies operating in Russia, our research and development activities related to the InteKrin PPAR gamma inhibitor product could be materially adversely affected.

If we fail to comply with environmental, health and safety laws and regulations, we could become subject to fines or penalties or incur costs that could have a material adverse effect on the success of our business.

Our research and development activities and our third-party manufacturers’ and suppliers’ activities involve the controlled storage, use and disposal of hazardous materials, including the components of our product candidates and other hazardous compounds. We and our manufacturers and suppliers are subject to laws and regulations governing the use, manufacture, storage, handling and disposal of these hazardous materials. In some cases, these hazardous materials and various wastes resulting from their use are stored at our and our manufacturers’ facilities pending their use and disposal. We cannot eliminate the risk of contamination, which could cause an interruption of our commercialization efforts, research and development efforts and business operations, environmental damage resulting in costly cleanup and liabilities under applicable laws and regulations governing the use, storage, handling and disposal of these materials and specified waste products. Although we believe that the safety procedures utilized by us and our third-party manufacturers for handling and disposing of these materials generally comply with the standards prescribed by these laws and regulations, we cannot guarantee that this is the case or eliminate the risk of accidental contamination or injury from these

S-55

Table of Contents

materials. In such an event, we may be held liable for any resulting damages and such liability could exceed our resources and state or federal or other applicable authorities may curtail our use of certain materials and/or interrupt our business operations. Furthermore, environmental laws and regulations are complex, change frequently and have tended to become more stringent. We cannot predict the impact of such changes and cannot be certain of our future compliance. We do not currently carry biological or hazardous waste insurance coverage.

We or the third parties upon whom we depend may be adversely affected by earthquakes or other natural disasters and our business continuity and disaster recovery plans may not adequately protect us from a serious disaster.

Our corporate headquarters and laboratory are located in the San Francisco Bay Area and in Southern California (Camarillo), respectively, and one of our collaboration partners, Daiichi Sankyo, is located in Japan. These locations have in the past experienced severe earthquakes and other natural disasters. We do not carry earthquake insurance. Earthquakes or other natural disasters could severely disrupt our operations or those of our collaboration partners and have a material adverse effect on our business, results of operations, financial condition and prospects. If a natural disaster, power outage or other event occurred that prevented us from using all or a significant portion of our headquarters, that damaged critical infrastructure (such as the manufacturing facilities of our third-party contract manufacturers) or that otherwise disrupted operations, it may be difficult or, in certain cases, impossible for us to continue our business for a substantial period of time. The disaster recovery and business continuity plans we have in place currently are limited and are unlikely to prove adequate in the event of a serious disaster or similar event. We may incur substantial expenses as a result of the limited nature of our disaster recovery and business continuity plans, which, particularly when taken together with our lack of earthquake insurance, could have a material adverse effect on our business.

Risks Related to Ownership of Our Common Stock

The market price of our common stock may be highly volatile, and purchasers of our common stock could incur substantial losses.

The market price of our common stock has been highly volatile since our IPO and the intraday sales price per share has ranged from $12.04 to $38.10 per share during the period from November 6, 2014 through May 20, 2016 and could be subject to wide fluctuations in response to various factors, some of which are beyond our control. These factors include those discussed in this “Risk Factors” section of this prospectus supplement and others such as:

S-56

Table of Contents

In addition, biopharmaceutical companies in particular have experienced extreme price and volume fluctuations that have often been unrelated or disproportionate to the operating performance of these companies. Broad market and industry factors may negatively affect the market price of our common stock, regardless of our actual operating performance.

Our principal stockholders and management own a significant percentage of our stock and will be able to exert significant control over matters subject to stockholder approval.

As of March 31, 2016, our executive officers, directors, five percent stockholders and their affiliates beneficially owned approximately 72.7% of our voting stock (assuming no exercise of outstanding options). These stockholders have the ability to influence us through their ownership positions, which may prevent or discourage unsolicited acquisition proposals or offers for our common stock that you may believe are in your best interest as one of our stockholders.

S-57

Table of Contents

Future sales and issuances of our common stock or rights to purchase common stock, including pursuant to our equity incentive plans and convertible notes, could result in additional dilution of the percentage ownership of our stockholders and could cause our stock price to fall.

We will need additional capital in the future to continue our planned operations. To the extent we raise additional capital by issuing equity securities, our stockholders may experience substantial dilution. We may sell common stock, convertible securities or other equity securities in one or more transactions at prices and in a manner we determine from time to time. If we sell common stock, convertible securities or other equity securities in more than one transaction, investors may be materially diluted by subsequent sales. These sales may also result in material dilution to our existing stockholders, and new investors could gain rights superior to our existing stockholders.

Pursuant to our 2014 Equity Incentive Award Plan, or the 2014 Plan, our management is authorized to grant stock options and other equity-based awards to our employees, directors and consultants. Under the 2014 Plan, the number of shares of our common stock initially reserved for issuance is 2,300,000 plus the number of shares remaining available for future awards under the 2010 Plan. The number of shares available for future grant under the 2014 Plan will be increased by (i) the number of shares pursuant to outstanding awards under the 2010 Plan that are forfeited or lapse unexercised and which following the effective date are not issued under the 2010 Plan and (ii) an annual increase on the first day of each fiscal year beginning in 2015 and ending in 2024, equal to 4% of the shares of stock outstanding as of the last day of the preceding fiscal year, or such smaller number of shares as determined by our board of directors. Pursuant to our 2014 Employee Stock Purchase Plan, or 2014 ESPP, eligible employees are able to acquire shares of our common stock at a discount to the prevailing market price, and an aggregate of 320,000 shares are initially available for issuance under the 2014 ESPP. The number of shares available for issuance under the 2014 ESPP will automatically increase on the first day of each fiscal year beginning in 2015 and ending in 2024, equal to 1% of the shares of common stock outstanding on the last day of the immediately preceding fiscal year or such smaller number of shares as determined by our board of directors. If our board of directors elects to increase the number of shares available for future grant under the 2014 Plan or the 2014 ESPP, our stockholders may experience additional dilution, which could cause our stock price to fall.

In February 2016, we issued and sold $100.0 million aggregate principal amount of our 8.2% senior convertible notes due March 2022. The holders may convert their convertible notes at their option at any time prior to the close of business on the business day immediately preceding March 31, 2022. Upon conversion of the convertible notes by a holder, the holder will receive shares of our common stock, together, if applicable, with cash in lieu of any fractional share. The initial conversion rate is 44.7387 shares of common stock per $1,000 principal amount of convertible notes, which is equivalent to an initial conversion price of approximately $22.35 per share, and is subject to adjustment in certain events.

Our ability to use our net operating loss carryforwards and certain other tax attributes may be limited.

We have incurred substantial losses during our history and do not expect to become profitable in the near future, and we may never achieve profitability. To the extent that we continue to generate taxable losses, unused losses will carry forward to offset future taxable income, if any, until such unused losses expire. Under Sections 382 and 383 of the Internal Revenue Code of 1986, as amended, if a corporation undergoes an “ownership change,” generally defined as a greater than 50 percentage point change (by value) in its equity ownership by certain stockholders over a three-year period, the corporation’s ability to use its pre-change net operating loss carryforwards, or NOLs, and other pre-change tax attributes (such as research tax credits) to offset its post-change income or taxes may be limited. We have experienced ownership changes in the past and may experience ownership changes in the future as a result of shifts in our stock ownership (some of which shifts are outside our control). As a result, if we earn net taxable income, our ability to use our pre-change NOLs to offset such taxable income will be subject to limitations. Similar provisions of state tax law may also apply to limit our use of accumulated state tax attributes. In addition, at the state level, there may be periods during which the use of NOLs is suspended or otherwise limited, which could accelerate or permanently increase state taxes owed. As a result, even if we attain profitability, we may be unable to use a material portion of our NOLs and other tax attributes, which could adversely affect our future cash flows.

S-58

Table of Contents

We do not intend to pay dividends on our common stock so any returns will be limited to the value of our stock.

We have never declared or paid any cash dividends on our common stock. In addition, the terms of our outstanding senior convertible notes restrict our ability to pay dividends or make other distributions on our common stock, subject to limited exceptions. We currently anticipate that we will retain future earnings for the development, operation and expansion of our business and do not anticipate declaring or paying any cash dividends for the foreseeable future. Any return to stockholders will therefore be limited to the appreciation of their stock.

Provisions in our amended and restated certificate of incorporation and amended and restated bylaws, as well as provisions of Delaware law, could make it more difficult for a third party to acquire us or increase the cost of acquiring us, even if doing so would benefit our stockholders or remove our current management.

Our amended and restated certificate of incorporation, amended and restated bylaws and Delaware law contain provisions that may have the effect of delaying or preventing a change in control of us or changes in our management. Our amended and restated certificate of incorporation and bylaws include provisions that:

These provisions, alone or together, could delay, deter or prevent hostile takeovers and changes in control or changes in our management.

In addition, because we are incorporated in Delaware, we are governed by the provisions of Section 203 of the Delaware General Corporation Law, which limits the ability of stockholders owning in excess of 15% of our outstanding voting stock to merge or combine with us.

S-59

Table of Contents

Any provision of our amended and restated certificate of incorporation or amended and restated bylaws or Delaware law that has the effect of delaying or deterring a change in control could limit the opportunity for our stockholders to receive a premium for their shares of our common stock and could also affect the price that some investors are willing to pay for our common stock.

Risks Related to this Offering

If you purchase our common stock in this offering, you will incur immediate and substantial dilution in the book value of your shares.

Investors purchasing shares of common stock in this offering will pay a price per share that substantially exceeds the as adjusted book value per share of our tangible assets after subtracting our liabilities. As a result, investors purchasing shares of common stock in this offering will incur immediate dilution of $         per share, based on a public offering price of $         per share and our as adjusted net tangible book value as of March 31, 2016 after giving effect to this offering would be $        .

This dilution is due to the substantially lower price paid by our investors who purchased shares prior to this offering as compared to the price offered to the public in this offering, and the exercise of stock options granted to our employees. In addition, as of May 18, 2016, we had outstanding options to purchase 9.93 million shares of our common stock; the exercise of any of these options would result in additional dilution. As a result of the dilution to investors purchasing shares in this offering, investors may receive significantly less than the purchase price paid in this offering, if anything, in the event of our liquidation.

Sales of a substantial number of shares of our common stock in the public market could cause our stock price to fall.

If our existing stockholders sell, or indicate an intention to sell, substantial amounts of our common stock in the public market after the lock-up and other legal restrictions on resale discussed in this prospectus supplement lapse, the market price of our common stock could decline. Based upon the number of shares of common stock outstanding as of March 31, 2016, upon the closing of this offering we will have outstanding a total of 42,639,225 shares of common stock. Other than any shares held by our directors and officers and certain existing investors, all of these are currently freely tradable, and the shares to be sold in this offering, plus any shares sold upon exercise of the underwriter’s option to purchase additional shares, will be freely tradable, without restriction, in the public market immediately following this offering. The underwriter, however, may, in its sole discretion, permit our officers, directors and stockholders who are subject to these lock-up agreements to sell shares prior to the expiration of the lock-up agreements.

Certain holders of shares of our common stock are entitled to rights with respect to the registration of their shares under the Securities Act. Registration of these shares under the Securities Act would result in the shares becoming freely tradable without restriction under the Securities Act, except for shares purchased by affiliates. Any sales of securities by these stockholders could have a material adverse effect on the trading price of our common stock.

We will have broad discretion in the use of the net proceeds to us from this offering and we may not use the offering proceeds that we receive effectively.

Our management will have broad discretion in the application of the net proceeds to us from this offering, including for any of the purposes described in the section of this prospectus supplement entitled “Use of Proceeds,” and you will not have the opportunity as part of your investment decision to assess whether the net proceeds are being used appropriately. Because of the number and variability of factors that will determine our use of the net proceeds to us from this offering, their ultimate use may vary from their currently intended use. The failure by our management to apply these funds effectively could harm our business. Pending their use, we may invest the net proceeds to us from this offering in investment-grade, interest-bearing securities. These investments may not yield a favorable return to our stockholders.

S-60

Table of Contents