UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
FORM 8-K
CURRENT REPORT
Pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934
Date of Report (date of earliest event reported):
July 24, 2014
Cabot Microelectronics Corporation
(Exact name of registrant as specified in its charter)
|
Delaware
|
|
000-30205
|
|
36-4324765
|
|
(State or other jurisdiction of incorporation)
|
|
(Commission File Number)
|
|
(IRS Employer Identification)
|
|
870 Commons Drive, Aurora, Illinois
|
|
60504
|
|
(Address of principal executive offices)
|
|
(Zip Code)
|
|
(630) 375-6631
|
|
(Registrant's telephone number, including area code)
|
|
Not applicable
|
|
(Former name or former address, if changed since last report)
|
Check the appropriate box below if the Form 8-K filing is intended to simultaneously satisfy the filing obligation of the registrant under any of the following provisions:
|
o
|
Written communications pursuant to Rule 425 under the Securities Act (17 CFR 230.425)
|
|
o
|
Soliciting material pursuant to Rule 14a-12 under the Exchange Act (17 CFR 240.14a-12)
|
|
o
|
Pre-commencement communications pursuant to Rule 14d-2(b) under the Exchange Act (17 CFR 240.14d-2(b))
|
|
o
|
Pre-commencement communications pursuant to Rule 13e-4(c) under the Exchange Act (17 CFR 240.13e-4(c))
|
Item 2.02 Results of Operations and Financial Condition.
On July 24, 2014, Cabot Microelectronics Corporation issued a press release entitled "Cabot Microelectronics Corporation Reports Solid Results for Third Quarter of Fiscal 2014," a copy of which is attached hereto as Exhibit 99.1 and incorporated herein by reference. The press release contains financial and other information including that related to the Company's third fiscal quarter ended June 30, 2014.
This information is being furnished pursuant to Item 2.02 of Form 8-K and shall not be deemed "filed" for purposes of Section 18 of the Securities and Exchange Act of 1934, as amended (the "Exchange Act"), or incorporated by reference in any filing under the Securities Act of 1933, as amended, or the Exchange Act, except as shall be expressly set forth by specific reference in such a filing.
Item 9.01 Financial Statements and Exhibits.
|
(c)
|
Exhibits
|
|
|
|
|
|
The following exhibit is being furnished, not filed, herewith pursuant to Item 2.02 of Form 8-K:
|
|
|
|
|
|
99.1 Press release, dated July 24, 2014, entitled "Cabot Microelectronics Corporation Reports Solid Results for Third Quarter of Fiscal 2014."
|
SIGNATURE
Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned hereunto duly authorized.
|
|
|
CABOT MICROELECTRONICS CORPORATION
|
|
|
|
|
[Registrant]
|
|
|
|
|
|
|
|
Date: July 24, 2014
|
By:
|
/s/ WILLIAM S. JOHNSON
|
|
|
|
|
William S. Johnson
|
|
|
|
|
Executive Vice President and Chief Financial Officer
|
|
|
|
|
[Principal Financial Officer]
|
|
INDEX TO EXHIBITS
|
Exhibit Number
|
|
Title
|
|
99.1
|
|
Press release, dated July 24, 2014, entitled "Cabot Microelectronics Corporation Reports Solid Results for Third Quarter of Fiscal 2014."
|
EXHIBIT 99.1
PRESS RELEASE
Contact:
Trisha Tuntland
Manager of Investor Relations
Cabot Microelectronics Corporation
(630) 499-2600
CABOT MICROELECTRONICS CORPORATION REPORTS
SOLID RESULTS FOR THIRD QUARTER OF FISCAL 2014
Revenue of $108.4 Million, Including Record Revenue in Tungsten and Advanced Dielectrics Slurry Business Areas
Gross Profit Margin of 47.7 Percent of Revenue
Earnings Per Share of 53 Cents
Purchased $18.6 million of Stock Under Share Repurchase Program
AURORA, IL, July 24, 2014 – Cabot Microelectronics Corporation (Nasdaq: CCMP), the world's leading supplier of chemical mechanical planarization (CMP) polishing slurries and a growing CMP pad supplier to the semiconductor industry, today reported financial results for its third quarter of fiscal 2014, which ended June 30, 2014.
Total revenue during the third fiscal quarter was $108.4 million. The company generated 2.5 percent revenue growth from its CMP consumables products for semiconductor applications over the prior year, including record revenue in its Tungsten and Advanced Dielectrics slurry business areas. However, lower revenue from the company's QED Technologies business, which is primarily capital equipment-oriented, primarily drove the 1.5 percent year-over-year decline in total revenue. The company recorded a gross profit margin of 47.7 percent of revenue in the third fiscal quarter, diluted earnings per share of $0.53 and cash flow from operations of $21.8 million. The company's balance sheet reflects a cash balance of $265.5 million and $175.0 million of debt outstanding as of June 30, 2014. During the quarter, the company purchased $18.6 million of stock under its share repurchase program, compared to $10.0 million in the same quarter last year.
"We are pleased to have achieved record revenue in our Tungsten and Advanced Dielectrics slurry businesses this quarter, as well as additional year-over-year revenue growth in our Aluminum slurry and CMP Pads businesses, and nearly 40 percent revenue growth in China," said William Noglows, Chairman and CEO of Cabot Microelectronics. "We believe our broad and deep capabilities as a CMP technology leader, including global infrastructure close to our customers around the world, and a commitment to excellence in global supply chain management and quality systems, differentiate us from our competitors. Based on this, we believe we are well-positioned to leverage advanced technologies such as 3D NAND, FinFet and multi-patterning, which have driven the need for new innovations in fab materials and should drive increased demand for CMP consumables."
Key Financial Information
Total third fiscal quarter revenue of $108.4 million represents a 1.5 percent decrease from the $110.0 million reported in the same quarter last year, on lower revenue from the company's QED Technologies business, which more than offset 2.5 percent growth from the company's IC CMP consumables products. In particular, the company achieved record revenue in its Tungsten and Advanced Dielectrics slurry businesses this quarter, and revenue from its CMP Pads and Aluminum slurry businesses grew compared to the same quarter last year. Year to date revenue of $308.3 million is 2.7 percent lower than the prior year, reflecting lower revenue from QED Technologies, and also including a $2.7 million adverse impact associated with foreign exchange rate changes, primarily the weaker Japanese yen versus the U.S. dollar.
Gross profit, expressed as a percentage of revenue, was 47.7 percent this quarter, compared to 49.7 percent of revenue reported in the same quarter a year ago. Compared to the year ago quarter, gross profit percentage decreased primarily due to higher variable manufacturing costs, including higher raw material costs and higher logistics costs. Year to date, gross profit represented 47.3 percent of revenue, which includes a 70 basis point adverse impact of an asset impairment charge related to certain manufacturing assets recorded during the second fiscal quarter. The company expects its gross profit for the full fiscal year to be around the lower end of its guidance range of 48 to 50 percent of revenue.
Operating expenses, which include research, development and technical, selling and marketing, and general and administrative expenses, were $33.2 million in the third fiscal quarter, or $0.8 million higher than the $32.4 million reported in the same quarter a year ago, primarily due to higher travel costs, and professional fees associated with amending the company's existing credit agreement, which was completed this quarter. Year to date, total operating expenses were $97.2 million, or 3.0 percent lower than the previous fiscal year. The company continues to expect operating expenses for the full fiscal year to be between $127 million and $131 million.
Net income for the quarter was $13.3 million, down from $15.5 million reported in the same quarter last year. Net income was lower primarily due to a lower gross profit margin and lower revenue, partially offset by a lower effective tax rate. Year to date, net income was $34.7 million, which is up 0.3 percent compared to the prior year.
Diluted earnings per share were $0.53 this quarter, compared to $0.65 reported in the third quarter of fiscal 2013, which included a $0.05 benefit associated with the company's permanent reinvestment election in Japan. Year to date, diluted earnings per share were $1.39, which includes the adverse impact of $0.06 due to the asset impairment charge recorded during the second fiscal quarter, compared to $1.46 last year.
CONFERENCE CALL
Cabot Microelectronics Corporation's quarterly earnings conference call will be held today at 9:00 a.m. Central Time. The conference call will be available via live webcast and replay from the company's website, www.cabotcmp.com, or by phone at (844) 825-4410. Callers outside the U.S. can dial (973) 638-3236. The conference code for the call is 69642903. A transcript of the formal comments made during the conference call will also be available in the Investor Relations section of the company's website.
ABOUT CABOT MICROELECTRONICS CORPORATION
Cabot Microelectronics Corporation, headquartered in Aurora, Illinois, is the world's leading supplier of CMP polishing slurries and a growing CMP pad supplier to the semiconductor industry. The company's products play a critical role in the production of advanced semiconductor devices, enabling the manufacture of smaller, faster and more complex devices by its customers. The company's mission is to create value by developing reliable and innovative solutions, through close customer collaboration, that solve today's challenges and help enable tomorrow's technology. Since becoming an independent public company in 2000, the company has grown to approximately 1,050 employees on a global basis. For more information about Cabot Microelectronics Corporation, visit www.cabotcmp.com or contact Trisha Tuntland, Manager of Investor Relations at 630-499-2600.
SAFE HARBOR STATEMENT
This news release may include statements that constitute "forward looking statements" within the meaning of federal securities regulations. These forward-looking statements include statements related to: future sales and operating results; company and industry growth, contraction or trends; growth or contraction of the markets in which the company participates; international events, regulatory or legislative activity, or various economic factors; product performance; the generation, protection and acquisition of intellectual property, and litigation related to such intellectual property; new product introductions; development of new products, technologies and markets; natural disasters; the acquisition of or investment in other entities; uses and investment of the company's cash balance; financing facilities and related debt, payment of principal and interest, and compliance with covenants and other terms; the company's capital structure; and the construction and operation of facilities by Cabot Microelectronics Corporation. These forward-looking statements involve a number of risks, uncertainties, and other factors, including those described from time to time in Cabot Microelectronics' filings with the Securities and Exchange Commission (SEC), that could cause actual results to differ materially from those described by these forward-looking statements. In particular, see "Risk Factors" in the company's quarterly report on Form 10-Q for the quarter ended March 31, 2014 and in the company's annual report on Form 10-K for the fiscal year ended September 30, 2013, both filed with the SEC. Cabot Microelectronics assumes no obligation to update this forward-looking information.