LMR Lomiko Metals Inc

Fundamental Research Holds Conference Call On Lomiko's Graphene and 3D Printing Developments

VANCOUVER, BRITISH COLUMBIA--(Marketwired - Jan 6, 2014) - LOMIKO METALS INC. (TSX-VENTURE:LMR)(PINKSHEETS:LMRMF)(FRANKFURT:DH8B) (Europe: ISIN: CA54163Q1028, WKN: A0Q9W7) (the "Company") has achieved several milestones in 2013.

This release is a review of those milestones and an invitation to join analysts from Fundamental Research reviewing a report on the company's current status.

The report may be downloaded at: FRC REPORT

Conference Call Details

Date: Jan 8, 2014

Time: 1 PM EST, 10 AM PST

Step #1: Join the call

(NOTE: You MUST dial one of the numbers below to hear the call AND complete both steps):

Canada +1 (514) 907-7491

USA +1 (213) 289-0155

or

+1 (888) 350-3035

USA 1 (877) 273-4202

Conference room number is 5829680

Step #2: Click the following link 10 minutes before the call:

https://www4.gotomeeting.com/join/512824359

A Review of 2013 Developments

In 2013 Lomiko firmly entered the exciting and vital world of graphene. We are looking forward to bringing our graphene efforts forward in 2014.

Strategic Alliance with Graphene Labs

On February 12, 2013, Lomiko and Graphene Labs agreed to co-develop a vertically integrated supply chain that includes a secure supply of high-quality graphite, cost-effective and scalable processing, tight quality control and integration of graphene-based products in end-user products. The end goal is to find commercially viable routes to make graphene-based energy storage devices.

Researching Graphene Supercapacitors

On May 29, 2013 SUNY Research Foundation at Stony Brook University, Graphene Laboratories Inc. and Lomiko Metals Inc. agreed to investigate novel energy-focused applications for graphene. The research foundation, through Stony Brook University's Advanced Energy Research and Technology Center (AERTC) and the Center for Advanced Sensor Technology (Sensor CAT), examined the most efficient methods of using this graphene for energy storage applications.

Graphite to Graphene Conversion

On September 17, 2013 Lomiko and Graphene Labs reported that natural graphite flakes were oxidized and turned into Graphene Oxide ("GO") by modified Hummer's method. As the result, a stable aqueous dispersion with concentration of 40 grams per litre was obtained. Further, the GO was converted into Reduced Graphene Oxide ("RGO"). The specific surface area of the RGO was found to be 500 square metres per gram and its electrical conductivity 4 (four) S per centimetre. These values are similar or exceeding the values for the RGO obtained from other samples of natural graphite taken for comparison and processed by the same procedure.

Creation of Graphene 3D Lab

On November 22, 2013 Lomiko and Graphene Labs announced the formation of Graphene 3D Lab Inc. to focus on the development of high-performance graphene-enhanced materials for 3D Printing. Lomiko will provide further graphite samples to Graphene 3D Labs as the exclusive supplier to Graphene 3D Labs and has invested $ 50,000 in the start-up for 250,000 preferred shares.

3D Printing is a new and promising manufacturing technology that has garnered much interest, growing from uses in prototyping to everyday products. Today, it is a billion dollar industry growing at a brisk pace. High quality graphite is a base material for producing graphene. Essentially graphene is mixed with the existing plastic polymer used as the 3D printing medium. Done properly this mixing allows the graphene to "share" some of its qualities with the polymer making a 3D printing plastic polymer conductive. This material may be used to print 3D electronic circuits from a 3D printer.

Prototype Graphene Supercapacitor

On December 4, 2013 Stony Brook University, Lomiko and Graphene Laboratories Inc. ("Graphene Labs") announce they have reached a significant milestone by receiving a prototype graphene supercapacitor and a report from Stony Brook University and New York State's Center for Advanced Sensor Technology (Sensor CAT). The prototype of the supercapacitor was made using graphene composite material prepared using a proprietary technology developed at Graphene Labs. The measured specific capacitance of the prototype was found to be around 500 Farad per gram of the material. This value is comparable with the best values reported in the literature for a supercapacitor of this type.

Future Plans

Graphene 3D Lab will be focused on creating new patents related to the conversion process and its applications in the coming months. Lomiko will require further funding in 2014 and will announce plans shortly. Further, Lomiko has filed an Annual Information Form (AIF) and plans to list shares on a US Exchange as soon as possible. The participants in the Supercapacitor Project are now reviewing data options for the next step of the program. The Company has issued 1,825,000 options at $0.10 each to directors and consultants exercisable for up to 60 months from the date of grant. The options are subject to a four-month hold period commencing January 6, 2014.

Graphene 3D Labs Inc. Background

Graphene 3D Laboratories Inc a spin-out of Graphene Laboratories Inc, focuses on development of high-performance graphene-enhanced materials for 3D Printing. For more information on Graphene 3D Labs, Inc, visit www.graphene3Dlab.com or contact them at (516)-375-9901 or email: info@graphene3dlab.com.

Lomiko Metals Inc. Background

Lomiko Metals Inc. is a Canada-based, exploration-stage company. The Company is engaged in the acquisition, exploration and development of resource properties that contain minerals for the new green economy. Its mineral properties include the Quatre Milles Graphite Property and the Vines Lake property which both have had recent major discoveries.

For more information on Lomiko Metals Inc., review the website at www.lomiko.com.

On Behalf of the Board

A. Paul Gill, Chief Executive Officer

We seek safe harbor. Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

Lomiko Metals Inc.A. Paul GillChief Executive Officer604-729-5312info@lomiko.comwww.lomiko.com